All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jiri Slaby <jslaby@suse.cz>
To: gregkh@linuxfoundation.org
Cc: linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org,
	Jiri Slaby <jslaby@suse.cz>
Subject: [PATCH 5/7] mxser: move FIFO clearing to mxser_disable_and_clear_FIFO()
Date: Wed, 22 Sep 2021 09:59:36 +0200	[thread overview]
Message-ID: <20210922075938.31390-5-jslaby@suse.cz> (raw)
In-Reply-To: <20210922075938.31390-1-jslaby@suse.cz>

This code is used on two places, make a helper for disabling and
clearing FIFOs. And demangle the too complicated 'if' by using a local
variable.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/tty/mxser.c | 26 ++++++++++++--------------
 1 file changed, 12 insertions(+), 14 deletions(-)

diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index c194a96bb14e..6913a1caa6f0 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -706,6 +706,16 @@ static void mxser_check_modem_status(struct tty_struct *tty,
 		mxser_handle_cts(tty, port, status);
 }
 
+static void mxser_disable_and_clear_FIFO(struct mxser_port *info)
+{
+	u8 fcr = UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT;
+
+	if (info->board->must_hwid)
+		fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE;
+
+	outb(fcr, info->ioaddr + UART_FCR);
+}
+
 static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
 {
 	struct mxser_port *info = container_of(port, struct mxser_port, port);
@@ -730,13 +740,7 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
 	 * Clear the FIFO buffers and disable them
 	 * (they will be reenabled in mxser_change_speed())
 	 */
-	if (info->board->must_hwid)
-		outb((UART_FCR_CLEAR_RCVR |
-			UART_FCR_CLEAR_XMIT |
-			MOXA_MUST_FCR_GDA_MODE_ENABLE), info->ioaddr + UART_FCR);
-	else
-		outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT),
-			info->ioaddr + UART_FCR);
+	mxser_disable_and_clear_FIFO(info);
 
 	/*
 	 * At this point there's no way the LSR could still be 0xFF;
@@ -824,13 +828,7 @@ static void mxser_shutdown_port(struct tty_port *port)
 	outb(0x00, info->ioaddr + UART_IER);
 
 	/* clear Rx/Tx FIFO's */
-	if (info->board->must_hwid)
-		outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT |
-				MOXA_MUST_FCR_GDA_MODE_ENABLE,
-				info->ioaddr + UART_FCR);
-	else
-		outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
-			info->ioaddr + UART_FCR);
+	mxser_disable_and_clear_FIFO(info);
 
 	/* read data port to reset things */
 	(void) inb(info->ioaddr + UART_RX);
-- 
2.33.0


  parent reply	other threads:[~2021-09-22  7:59 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-22  7:59 [PATCH 1/7] mxser: restore baud rate if its setting fails Jiri Slaby
2021-09-22  7:59 ` [PATCH 2/7] mxser: simplify condition in mxser_receive_chars_new Jiri Slaby
2021-09-22  7:59 ` [PATCH 3/7] mxser: make mxser_port::ldisc_stop_rx a bool Jiri Slaby
2021-09-22  7:59 ` [PATCH 4/7] mxser: simplify FCR computation in mxser_change_speed() Jiri Slaby
2021-09-22  7:59 ` Jiri Slaby [this message]
2021-09-22  7:59 ` [PATCH 6/7] mxser: don't read from UART_FCR Jiri Slaby
2021-09-22  7:59 ` [PATCH 7/7] mxser: store FCR state in mxser_port::FCR Jiri Slaby

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210922075938.31390-5-jslaby@suse.cz \
    --to=jslaby@suse.cz \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.