All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alvin Zhang <alvinx.zhang@intel.com>
To: qi.z.zhang@intel.com
Cc: dev@dpdk.org, Alvin Zhang <alvinx.zhang@intel.com>
Subject: [dpdk-dev] [PATCH v4] net/ice: add support for low Rx latency
Date: Fri, 24 Sep 2021 17:18:43 +0800	[thread overview]
Message-ID: <20210924091843.14880-1-alvinx.zhang@intel.com> (raw)
In-Reply-To: <20210924085653.17080-1-alvinx.zhang@intel.com>

This patch adds a devarg parameter to enable/disable low Rx latency.

Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
---

v3: rebase to dpdk-next-net-intel
v4: rename arg rx-low-latency to rx_low_latency
---
 doc/guides/nics/ice.rst      | 12 ++++++++++++
 drivers/net/ice/ice_ethdev.c | 26 +++++++++++++++++++++++---
 drivers/net/ice/ice_ethdev.h |  1 +
 3 files changed, 36 insertions(+), 3 deletions(-)

diff --git a/doc/guides/nics/ice.rst b/doc/guides/nics/ice.rst
index ebe2cbc..8d43488 100644
--- a/doc/guides/nics/ice.rst
+++ b/doc/guides/nics/ice.rst
@@ -227,6 +227,18 @@ Runtime Config Options
 
     -a af:00.0,pps_out='[pin:0]'
 
+- ``Low Rx latency`` (default ``0``)
+
+  vRAN workloads require low latency DPDK interface for the front haul
+  interface connection to Radio. By specifying ``1`` for parameter
+  ``rx_low_latency``, each completed Rx descriptor can be written immediately
+  to host memory and the Rx interrupt latency can be reduced to 2us::
+
+    -a 0000:88:00.0,rx_low_latency=1
+
+  As a trade-off, this configuration may cause the packet processing performance
+  degradation due to the PCI bandwidth limitation.
+
 Driver compilation and testing
 ------------------------------
 
diff --git a/drivers/net/ice/ice_ethdev.c b/drivers/net/ice/ice_ethdev.c
index e24a3b6..091a4a9 100644
--- a/drivers/net/ice/ice_ethdev.c
+++ b/drivers/net/ice/ice_ethdev.c
@@ -30,6 +30,7 @@
 #define ICE_PROTO_XTR_ARG         "proto_xtr"
 #define ICE_HW_DEBUG_MASK_ARG     "hw_debug_mask"
 #define ICE_ONE_PPS_OUT_ARG       "pps_out"
+#define ICE_RX_LOW_LATENCY        "rx_low_latency"
 
 static const char * const ice_valid_args[] = {
 	ICE_SAFE_MODE_SUPPORT_ARG,
@@ -37,6 +38,7 @@
 	ICE_PROTO_XTR_ARG,
 	ICE_HW_DEBUG_MASK_ARG,
 	ICE_ONE_PPS_OUT_ARG,
+	ICE_RX_LOW_LATENCY,
 	NULL
 };
 
@@ -1956,6 +1958,9 @@ static int ice_parse_devargs(struct rte_eth_dev *dev)
 	if (ret)
 		goto bail;
 
+	ret = rte_kvargs_process(kvlist, ICE_RX_LOW_LATENCY,
+				 &parse_bool, &ad->devargs.rx_low_latency);
+
 bail:
 	rte_kvargs_free(kvlist);
 	return ret;
@@ -3272,8 +3277,9 @@ static int ice_init_rss(struct ice_pf *pf)
 {
 	struct ice_hw *hw = ICE_VSI_TO_HW(vsi);
 	uint32_t val, val_tx;
-	int i;
+	int rx_low_latency, i;
 
+	rx_low_latency = vsi->adapter->devargs.rx_low_latency;
 	for (i = 0; i < nb_queue; i++) {
 		/*do actual bind*/
 		val = (msix_vect & QINT_RQCTL_MSIX_INDX_M) |
@@ -3283,8 +3289,21 @@ static int ice_init_rss(struct ice_pf *pf)
 
 		PMD_DRV_LOG(INFO, "queue %d is binding to vect %d",
 			    base_queue + i, msix_vect);
+
 		/* set ITR0 value */
-		ICE_WRITE_REG(hw, GLINT_ITR(0, msix_vect), 0x2);
+		if (rx_low_latency) {
+			/**
+			 * Empirical configuration for optimal real time
+			 * latency reduced interrupt throttling to 2us
+			 */
+			ICE_WRITE_REG(hw, GLINT_ITR(0, msix_vect), 0x1);
+			ICE_WRITE_REG(hw, QRX_ITR(base_queue + i),
+				      QRX_ITR_NO_EXPR_M);
+		} else {
+			ICE_WRITE_REG(hw, GLINT_ITR(0, msix_vect), 0x2);
+			ICE_WRITE_REG(hw, QRX_ITR(base_queue + i), 0);
+		}
+
 		ICE_WRITE_REG(hw, QINT_RQCTL(base_queue + i), val);
 		ICE_WRITE_REG(hw, QINT_TQCTL(base_queue + i), val_tx);
 	}
@@ -5497,7 +5516,8 @@ static int ice_xstats_get_names(__rte_unused struct rte_eth_dev *dev,
 			      ICE_HW_DEBUG_MASK_ARG "=0xXXX"
 			      ICE_PROTO_XTR_ARG "=[queue:]<vlan|ipv4|ipv6|ipv6_flow|tcp|ip_offset>"
 			      ICE_SAFE_MODE_SUPPORT_ARG "=<0|1>"
-			      ICE_PIPELINE_MODE_SUPPORT_ARG "=<0|1>");
+			      ICE_PIPELINE_MODE_SUPPORT_ARG "=<0|1>"
+			      ICE_RX_LOW_LATENCY "=<0|1>");
 
 RTE_LOG_REGISTER_SUFFIX(ice_logtype_init, init, NOTICE);
 RTE_LOG_REGISTER_SUFFIX(ice_logtype_driver, driver, NOTICE);
diff --git a/drivers/net/ice/ice_ethdev.h b/drivers/net/ice/ice_ethdev.h
index ea9d892..26f5c56 100644
--- a/drivers/net/ice/ice_ethdev.h
+++ b/drivers/net/ice/ice_ethdev.h
@@ -476,6 +476,7 @@ struct ice_pf {
  * Cache devargs parse result.
  */
 struct ice_devargs {
+	int rx_low_latency;
 	int safe_mode_support;
 	uint8_t proto_xtr_dflt;
 	int pipe_mode_support;
-- 
1.8.3.1


  parent reply	other threads:[~2021-09-24  9:18 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-14  1:31 [dpdk-dev] [PATCH] net/ice: add ability to reduce the Rx latency Alvin Zhang
2021-09-16  3:07 ` Tu, Lijuan
2021-09-16  8:28   ` Zhang, AlvinX
2021-09-17 17:25 ` Kevin Traynor
2021-09-18  1:33   ` Zhang, AlvinX
2021-09-21  9:20     ` Kevin Traynor
2021-09-22  2:16       ` Zhang, AlvinX
2021-09-28  9:22         ` Kevin Traynor
2021-09-18  2:59 ` [dpdk-dev] [PATCH v2] net/ice: add support for low " Alvin Zhang
2021-09-24  8:56   ` [dpdk-dev] [PATCH v3] " Alvin Zhang
2021-09-24  9:10     ` Zhang, Qi Z
2021-09-24  9:18     ` Alvin Zhang [this message]
2021-09-24  9:34       ` [dpdk-dev] [PATCH v5] " Alvin Zhang
2021-09-24 10:53         ` Zhang, Qi Z

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210924091843.14880-1-alvinx.zhang@intel.com \
    --to=alvinx.zhang@intel.com \
    --cc=dev@dpdk.org \
    --cc=qi.z.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.