From: Wen Gong <wgong@codeaurora.org> To: johannes@sipsolutions.net, ath11k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, wgong@codeaurora.org Subject: [PATCH v4 6/6] mac80211: save transmit power envelope element and power constraint Date: Fri, 24 Sep 2021 06:00:52 -0400 [thread overview] Message-ID: <20210924100052.32029-7-wgong@codeaurora.org> (raw) In-Reply-To: <20210924100052.32029-1-wgong@codeaurora.org> This is to save the transmit power envelope element and power constraint in struct ieee80211_bss_conf for 6 GHz. Lower driver will use this info to calculate the power limit. Signed-off-by: Wen Gong <wgong@codeaurora.org> --- include/net/mac80211.h | 6 ++++++ net/mac80211/mlme.c | 30 ++++++++++++++++++++++++++++++ 2 files changed, 36 insertions(+) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 8923a9fc4126..16a965262a4f 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -633,6 +633,9 @@ struct ieee80211_fils_discovery { * @beacon_tx_rate: The configured beacon transmit rate that needs to be passed * to driver when rate control is offloaded to firmware. * @power_type: power type of BSS for 6 GHz + * @tx_pwr_env: transmit power envelope array of BSS. + * @tx_pwr_env_num: number of @tx_pwr_env. + * @pwr_reduction: power constraint of BSS. */ struct ieee80211_bss_conf { const u8 *bssid; @@ -704,6 +707,9 @@ struct ieee80211_bss_conf { bool s1g; struct cfg80211_bitrate_mask beacon_tx_rate; enum ieee80211_ap_reg_power power_type; + struct ieee80211_tx_pwr_env tx_pwr_env[IEEE80211_TPE_MAX_IE_COUNT]; + u8 tx_pwr_env_num; + u8 pwr_reduction; }; /** diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 6e8e90ee8b6c..b72fa1f6116a 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2258,6 +2258,7 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_local *local = sdata->local; + struct ieee80211_bss_conf *bss_conf; u32 changed = 0; struct ieee80211_prep_tx_info info = { .subtype = stype, @@ -2407,6 +2408,11 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, cancel_delayed_work_sync(&ifmgd->tx_tspec_wk); sdata->encrypt_headroom = IEEE80211_ENCRYPT_HEADROOM; + + bss_conf = &sdata->vif.bss_conf; + bss_conf->pwr_reduction = 0; + bss_conf->tx_pwr_env_num = 0; + memset(bss_conf->tx_pwr_env, 0, sizeof(bss_conf->tx_pwr_env)); } static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata) @@ -5095,6 +5101,30 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata, else he_oper = NULL; + if (is_6ghz) { + struct ieee80211_bss_conf *bss_conf; + u8 i, j = 0; + + bss_conf = &sdata->vif.bss_conf; + + if (elems->pwr_constr_elem) + bss_conf->pwr_reduction = *elems->pwr_constr_elem; + + BUILD_BUG_ON(ARRAY_SIZE(bss_conf->tx_pwr_env) != + ARRAY_SIZE(elems->tx_pwr_env)); + + for (i = 0; i < elems->tx_pwr_env_num; i++) { + if (elems->tx_pwr_env_len[i] > + sizeof(bss_conf->tx_pwr_env[j])) + continue; + + bss_conf->tx_pwr_env_num++; + memcpy(&bss_conf->tx_pwr_env[j], elems->tx_pwr_env[i], + elems->tx_pwr_env_len[i]); + j++; + } + } + if (!ieee80211_verify_sta_he_mcs_support(sdata, sband, he_oper)) ifmgd->flags |= IEEE80211_STA_DISABLE_HE; } -- 2.31.1 -- ath11k mailing list ath11k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath11k
WARNING: multiple messages have this Message-ID (diff)
From: Wen Gong <wgong@codeaurora.org> To: johannes@sipsolutions.net, ath11k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, wgong@codeaurora.org Subject: [PATCH v4 6/6] mac80211: save transmit power envelope element and power constraint Date: Fri, 24 Sep 2021 06:00:52 -0400 [thread overview] Message-ID: <20210924100052.32029-7-wgong@codeaurora.org> (raw) In-Reply-To: <20210924100052.32029-1-wgong@codeaurora.org> This is to save the transmit power envelope element and power constraint in struct ieee80211_bss_conf for 6 GHz. Lower driver will use this info to calculate the power limit. Signed-off-by: Wen Gong <wgong@codeaurora.org> --- include/net/mac80211.h | 6 ++++++ net/mac80211/mlme.c | 30 ++++++++++++++++++++++++++++++ 2 files changed, 36 insertions(+) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 8923a9fc4126..16a965262a4f 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -633,6 +633,9 @@ struct ieee80211_fils_discovery { * @beacon_tx_rate: The configured beacon transmit rate that needs to be passed * to driver when rate control is offloaded to firmware. * @power_type: power type of BSS for 6 GHz + * @tx_pwr_env: transmit power envelope array of BSS. + * @tx_pwr_env_num: number of @tx_pwr_env. + * @pwr_reduction: power constraint of BSS. */ struct ieee80211_bss_conf { const u8 *bssid; @@ -704,6 +707,9 @@ struct ieee80211_bss_conf { bool s1g; struct cfg80211_bitrate_mask beacon_tx_rate; enum ieee80211_ap_reg_power power_type; + struct ieee80211_tx_pwr_env tx_pwr_env[IEEE80211_TPE_MAX_IE_COUNT]; + u8 tx_pwr_env_num; + u8 pwr_reduction; }; /** diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 6e8e90ee8b6c..b72fa1f6116a 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2258,6 +2258,7 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_local *local = sdata->local; + struct ieee80211_bss_conf *bss_conf; u32 changed = 0; struct ieee80211_prep_tx_info info = { .subtype = stype, @@ -2407,6 +2408,11 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, cancel_delayed_work_sync(&ifmgd->tx_tspec_wk); sdata->encrypt_headroom = IEEE80211_ENCRYPT_HEADROOM; + + bss_conf = &sdata->vif.bss_conf; + bss_conf->pwr_reduction = 0; + bss_conf->tx_pwr_env_num = 0; + memset(bss_conf->tx_pwr_env, 0, sizeof(bss_conf->tx_pwr_env)); } static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata) @@ -5095,6 +5101,30 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata, else he_oper = NULL; + if (is_6ghz) { + struct ieee80211_bss_conf *bss_conf; + u8 i, j = 0; + + bss_conf = &sdata->vif.bss_conf; + + if (elems->pwr_constr_elem) + bss_conf->pwr_reduction = *elems->pwr_constr_elem; + + BUILD_BUG_ON(ARRAY_SIZE(bss_conf->tx_pwr_env) != + ARRAY_SIZE(elems->tx_pwr_env)); + + for (i = 0; i < elems->tx_pwr_env_num; i++) { + if (elems->tx_pwr_env_len[i] > + sizeof(bss_conf->tx_pwr_env[j])) + continue; + + bss_conf->tx_pwr_env_num++; + memcpy(&bss_conf->tx_pwr_env[j], elems->tx_pwr_env[i], + elems->tx_pwr_env_len[i]); + j++; + } + } + if (!ieee80211_verify_sta_he_mcs_support(sdata, sband, he_oper)) ifmgd->flags |= IEEE80211_STA_DISABLE_HE; } -- 2.31.1
next prev parent reply other threads:[~2021-09-24 10:01 UTC|newest] Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-09-24 10:00 [PATCH v4 0/6] cfg80211/mac80211: Add support for 6GHZ STA for various modes : LPI, SP and VLP Wen Gong 2021-09-24 10:00 ` Wen Gong 2021-09-24 10:00 ` [PATCH v4 1/6] mac80211: add power type definition for 6 GHz Wen Gong 2021-09-24 10:00 ` Wen Gong 2021-09-24 10:00 ` [PATCH v4 2/6] mac80211: add parse regulatory info in 6 GHz operation information Wen Gong 2021-09-24 10:00 ` Wen Gong 2021-09-27 11:22 ` Johannes Berg 2021-09-27 11:22 ` Johannes Berg 2021-09-24 10:00 ` [PATCH v4 3/6] cfg80211: add definition for 6 GHz power spectral density(psd) Wen Gong 2021-09-24 10:00 ` Wen Gong 2021-09-27 11:28 ` Johannes Berg 2021-09-27 11:28 ` Johannes Berg 2021-09-24 10:00 ` [PATCH v4 4/6] cfg80211: save power spectral density(psd) of regulatory rule Wen Gong 2021-09-24 10:00 ` Wen Gong 2021-09-27 11:27 ` Johannes Berg 2021-09-27 11:27 ` Johannes Berg 2021-09-28 9:05 ` Wen Gong 2021-09-28 9:05 ` Wen Gong 2021-09-24 10:00 ` [PATCH v4 5/6] mac80211: use ieee802_11_parse_elems() to find ies instead of ieee80211_bss_get_ie() Wen Gong 2021-09-24 10:00 ` Wen Gong 2021-09-24 10:13 ` Johannes Berg 2021-09-24 10:13 ` Johannes Berg 2021-09-24 10:47 ` Johannes Berg 2021-09-24 10:47 ` Johannes Berg 2021-09-24 10:00 ` Wen Gong [this message] 2021-09-24 10:00 ` [PATCH v4 6/6] mac80211: save transmit power envelope element and power constraint Wen Gong
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210924100052.32029-7-wgong@codeaurora.org \ --to=wgong@codeaurora.org \ --cc=ath11k@lists.infradead.org \ --cc=johannes@sipsolutions.net \ --cc=linux-wireless@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.