All of lore.kernel.org
 help / color / mirror / Atom feed
From: Raffaele Tranquillini <raffaele.tranquillini@gmail.com>
To: thierry.reding@gmail.com, sam@ravnborg.org, airlied@linux.ie,
	daniel@ffwll.ch
Cc: y.oudjana@protonmail.com, ~postmarketos/upstreaming@lists.sr.ht,
	phone-devel@vger.kernel.org,
	Raffaele Tranquillini <raffaele.tranquillini@gmail.com>,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org
Subject: [PATCH 1/2] drm/panel: Add JDI R63452 MIPI DSI panel driver
Date: Sat, 25 Sep 2021 12:29:09 +0200	[thread overview]
Message-ID: <20210925102911.518038-1-raffaele.tranquillini@gmail.com> (raw)

This adds support for the JDI R63452 Full HD LCD panel used on the
Xiaomi Mi 5 smartphone, in MIPI DSI command mode.

Signed-off-by: Raffaele Tranquillini <raffaele.tranquillini@gmail.com>
---
 drivers/gpu/drm/panel/Kconfig                |   9 +
 drivers/gpu/drm/panel/Makefile               |   1 +
 drivers/gpu/drm/panel/panel-jdi-fhd-r63452.c | 323 +++++++++++++++++++
 3 files changed, 333 insertions(+)
 create mode 100644 drivers/gpu/drm/panel/panel-jdi-fhd-r63452.c

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index beb581b96ecd..ea548628da86 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -177,6 +177,15 @@ config DRM_PANEL_JDI_LT070ME05000
 	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
 	  24 bit per pixel.
 
+config DRM_PANEL_JDI_R63452
+	tristate "JDI R63452 Full HD DSI panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the JDI R63452
+	  DSI command mode panel as found in Xiaomi Mi 5 Devices.
+
 config DRM_PANEL_KHADAS_TS050
 	tristate "Khadas TS050 panel"
 	depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index c8132050bcec..6ab4072dae2d 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o
 obj-$(CONFIG_DRM_PANEL_INNOLUX_EJ030NA) += panel-innolux-ej030na.o
 obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o
 obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o
+obj-$(CONFIG_DRM_PANEL_JDI_R63452) += panel-jdi-fhd-r63452.o
 obj-$(CONFIG_DRM_PANEL_KHADAS_TS050) += panel-khadas-ts050.o
 obj-$(CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04) += panel-kingdisplay-kd097d04.o
 obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W) += panel-leadtek-ltk050h3146w.o
diff --git a/drivers/gpu/drm/panel/panel-jdi-fhd-r63452.c b/drivers/gpu/drm/panel/panel-jdi-fhd-r63452.c
new file mode 100644
index 000000000000..31eafbc38ec0
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-jdi-fhd-r63452.c
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2021 Raffaele Tranquillini <raffaele.tranquillini@gmail.com>
+ *
+ * Generated using linux-mdss-dsi-panel-driver-generator from Lineage OS device tree:
+ * https://github.com/LineageOS/android_kernel_xiaomi_msm8996/blob/lineage-18.1/arch/arm/boot/dts/qcom/a1-msm8996-mtp.dtsi
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+struct jdi_fhd_r63452 {
+	struct drm_panel panel;
+	struct mipi_dsi_device *dsi;
+	struct gpio_desc *reset_gpio;
+	bool prepared;
+};
+
+static inline struct jdi_fhd_r63452 *to_jdi_fhd_r63452(struct drm_panel *panel)
+{
+	return container_of(panel, struct jdi_fhd_r63452, panel);
+}
+
+#define dsi_generic_write_seq(dsi, seq...) do {				\
+		static const u8 d[] = { seq };				\
+		int ret;						\
+		ret = mipi_dsi_generic_write(dsi, d, ARRAY_SIZE(d));	\
+		if (ret < 0)						\
+			return ret;					\
+	} while (0)
+
+#define dsi_dcs_write_seq(dsi, seq...) do {				\
+		static const u8 d[] = { seq };				\
+		int ret;						\
+		ret = mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d));	\
+		if (ret < 0)						\
+			return ret;					\
+	} while (0)
+
+static void jdi_fhd_r63452_reset(struct jdi_fhd_r63452 *ctx)
+{
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+	usleep_range(10000, 11000);
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+	usleep_range(1000, 2000);
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+	usleep_range(10000, 11000);
+}
+
+static int jdi_fhd_r63452_on(struct jdi_fhd_r63452 *ctx)
+{
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct device *dev = &dsi->dev;
+	int ret;
+
+	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	dsi_generic_write_seq(dsi, 0xb0, 0x00);
+	dsi_generic_write_seq(dsi, 0xd6, 0x01);
+	dsi_generic_write_seq(dsi, 0xec,
+			      0x64, 0xdc, 0xec, 0x3b, 0x52, 0x00, 0x0b, 0x0b,
+			      0x13, 0x15, 0x68, 0x0b, 0xb5);
+	dsi_generic_write_seq(dsi, 0xb0, 0x03);
+
+	ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set tear on: %d\n", ret);
+		return ret;
+	}
+
+	dsi_dcs_write_seq(dsi, MIPI_DCS_SET_ADDRESS_MODE, 0x00);
+
+	ret = mipi_dsi_dcs_set_pixel_format(dsi, 0x77);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set pixel format: %d\n", ret);
+		return ret;
+	}
+
+	ret = mipi_dsi_dcs_set_column_address(dsi, 0x0000, 0x0437);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set column address: %d\n", ret);
+		return ret;
+	}
+
+	ret = mipi_dsi_dcs_set_page_address(dsi, 0x0000, 0x077f);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set page address: %d\n", ret);
+		return ret;
+	}
+
+	ret = mipi_dsi_dcs_set_tear_scanline(dsi, 0x0000);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set tear scanline: %d\n", ret);
+		return ret;
+	}
+
+	ret = mipi_dsi_dcs_set_display_brightness(dsi, 0x00ff);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set display brightness: %d\n", ret);
+		return ret;
+	}
+
+	dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x24);
+	dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
+	dsi_dcs_write_seq(dsi, MIPI_DCS_SET_CABC_MIN_BRIGHTNESS, 0x00);
+	dsi_dcs_write_seq(dsi, 0x84, 0x00);
+
+	ret = mipi_dsi_dcs_set_display_on(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set display on: %d\n", ret);
+		return ret;
+	}
+	msleep(20);
+
+	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
+		return ret;
+	}
+	msleep(80);
+
+	dsi_generic_write_seq(dsi, 0xb0, 0x04);
+	dsi_dcs_write_seq(dsi, 0x84, 0x00);
+	dsi_generic_write_seq(dsi, 0xc8, 0x11);
+	dsi_generic_write_seq(dsi, 0xb0, 0x03);
+
+	return 0;
+}
+
+static int jdi_fhd_r63452_off(struct jdi_fhd_r63452 *ctx)
+{
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct device *dev = &dsi->dev;
+	int ret;
+
+	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+	dsi_generic_write_seq(dsi, 0xb0, 0x00);
+	dsi_generic_write_seq(dsi, 0xd6, 0x01);
+	dsi_generic_write_seq(dsi, 0xec,
+			      0x64, 0xdc, 0xec, 0x3b, 0x52, 0x00, 0x0b, 0x0b,
+			      0x13, 0x15, 0x68, 0x0b, 0x95);
+	dsi_generic_write_seq(dsi, 0xb0, 0x03);
+
+	ret = mipi_dsi_dcs_set_display_off(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set display off: %d\n", ret);
+		return ret;
+	}
+	usleep_range(2000, 3000);
+
+	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
+		return ret;
+	}
+	msleep(120);
+
+	return 0;
+}
+
+static int jdi_fhd_r63452_prepare(struct drm_panel *panel)
+{
+	struct jdi_fhd_r63452 *ctx = to_jdi_fhd_r63452(panel);
+	struct device *dev = &ctx->dsi->dev;
+	int ret;
+
+	if (ctx->prepared)
+		return 0;
+
+	jdi_fhd_r63452_reset(ctx);
+
+	ret = jdi_fhd_r63452_on(ctx);
+	if (ret < 0) {
+		dev_err(dev, "Failed to initialize panel: %d\n", ret);
+		gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+		return ret;
+	}
+
+	ctx->prepared = true;
+	return 0;
+}
+
+static int jdi_fhd_r63452_unprepare(struct drm_panel *panel)
+{
+	struct jdi_fhd_r63452 *ctx = to_jdi_fhd_r63452(panel);
+	struct device *dev = &ctx->dsi->dev;
+	int ret;
+
+	if (!ctx->prepared)
+		return 0;
+
+	ret = jdi_fhd_r63452_off(ctx);
+	if (ret < 0)
+		dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
+
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+
+	ctx->prepared = false;
+	return 0;
+}
+
+static const struct drm_display_mode jdi_fhd_r63452_mode = {
+	.clock = (1080 + 120 + 16 + 40) * (1920 + 4 + 2 + 4) * 60 / 1000,
+	.hdisplay = 1080,
+	.hsync_start = 1080 + 120,
+	.hsync_end = 1080 + 120 + 16,
+	.htotal = 1080 + 120 + 16 + 40,
+	.vdisplay = 1920,
+	.vsync_start = 1920 + 4,
+	.vsync_end = 1920 + 4 + 2,
+	.vtotal = 1920 + 4 + 2 + 4,
+	.width_mm = 64,
+	.height_mm = 114,
+};
+
+static int jdi_fhd_r63452_get_modes(struct drm_panel *panel,
+				    struct drm_connector *connector)
+{
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(connector->dev, &jdi_fhd_r63452_mode);
+	if (!mode)
+		return -ENOMEM;
+
+	drm_mode_set_name(mode);
+
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	connector->display_info.width_mm = mode->width_mm;
+	connector->display_info.height_mm = mode->height_mm;
+	drm_mode_probed_add(connector, mode);
+
+	return 1;
+}
+
+static const struct drm_panel_funcs jdi_fhd_r63452_panel_funcs = {
+	.prepare = jdi_fhd_r63452_prepare,
+	.unprepare = jdi_fhd_r63452_unprepare,
+	.get_modes = jdi_fhd_r63452_get_modes,
+};
+
+static int jdi_fhd_r63452_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct jdi_fhd_r63452 *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(ctx->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
+				     "Failed to get reset-gpios\n");
+
+	ctx->dsi = dsi;
+	mipi_dsi_set_drvdata(dsi, ctx);
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO_BURST |
+			  MIPI_DSI_CLOCK_NON_CONTINUOUS;
+
+	drm_panel_init(&ctx->panel, dev, &jdi_fhd_r63452_panel_funcs,
+		       DRM_MODE_CONNECTOR_DSI);
+
+	ret = drm_panel_of_backlight(&ctx->panel);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to get backlight\n");
+
+	drm_panel_add(&ctx->panel);
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int jdi_fhd_r63452_remove(struct mipi_dsi_device *dsi)
+{
+	struct jdi_fhd_r63452 *ctx = mipi_dsi_get_drvdata(dsi);
+	int ret;
+
+	ret = mipi_dsi_detach(dsi);
+	if (ret < 0)
+		dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
+
+	drm_panel_remove(&ctx->panel);
+
+	return 0;
+}
+
+static const struct of_device_id jdi_fhd_r63452_of_match[] = {
+	{ .compatible = "jdi,fhd-r63452" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, jdi_fhd_r63452_of_match);
+
+static struct mipi_dsi_driver jdi_fhd_r63452_driver = {
+	.probe = jdi_fhd_r63452_probe,
+	.remove = jdi_fhd_r63452_remove,
+	.driver = {
+		.name = "panel-jdi-fhd-r63452",
+		.of_match_table = jdi_fhd_r63452_of_match,
+	},
+};
+module_mipi_dsi_driver(jdi_fhd_r63452_driver);
+
+MODULE_AUTHOR("Raffaele Tranquillini <raffaele.tranquillini@gmail.com>");
+MODULE_DESCRIPTION("DRM driver for JDI FHD R63452 DSI panel, command mode");
+MODULE_LICENSE("GPL v2");
-- 
2.32.0


             reply	other threads:[~2021-09-25 10:30 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-25 10:29 Raffaele Tranquillini [this message]
2021-09-25 13:39 ` [PATCH 1/2] drm/panel: Add JDI R63452 MIPI DSI panel driver Sam Ravnborg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210925102911.518038-1-raffaele.tranquillini@gmail.com \
    --to=raffaele.tranquillini@gmail.com \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=phone-devel@vger.kernel.org \
    --cc=sam@ravnborg.org \
    --cc=thierry.reding@gmail.com \
    --cc=y.oudjana@protonmail.com \
    --cc=~postmarketos/upstreaming@lists.sr.ht \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.