[PATCH 5.4 00/68] 5.4.150-rc1 review

[PATCH 5.4 00/68] 5.4.150-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.4.150 release.
There are 68 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 29 Sep 2021 17:02:05 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.150-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.4.150-rc1

Linus Torvalds <torvalds@linux-foundation.org>
    qnx4: work around gcc false positive warning bug

Juergen Gross <jgross@suse.com>
    xen/balloon: fix balloon kthread freezing

Pali Rohár <pali@kernel.org>
    arm64: dts: marvell: armada-37xx: Extend PCIe MEM space

Antoine Tenart <atenart@kernel.org>
    thermal/drivers/int340x: Do not set a wrong tcc offset on resume

Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
    EDAC/synopsys: Fix wrong value type assignment for edac_mode

Linus Torvalds <torvalds@linux-foundation.org>
    spi: Fix tegra20 build with CONFIG_PM=n

Guenter Roeck <linux@roeck-us.net>
    net: 6pack: Fix tx timeout and slot time

Guenter Roeck <linux@roeck-us.net>
    alpha: Declare virt_to_phys and virt_to_bus parameter as pointer to volatile

Dan Li <ashimida@linux.alibaba.com>
    arm64: Mark __stack_chk_guard as __ro_after_init

Helge Deller <deller@gmx.de>
    parisc: Use absolute_pointer() to define PAGE0

Linus Torvalds <torvalds@linux-foundation.org>
    qnx4: avoid stringop-overread errors

Linus Torvalds <torvalds@linux-foundation.org>
    sparc: avoid stringop-overread errors

Guenter Roeck <linux@roeck-us.net>
    net: i825xx: Use absolute_pointer for memcpy from fixed memory location

Guenter Roeck <linux@roeck-us.net>
    compiler.h: Introduce absolute_pointer macro

Li Jinlin <lijinlin3@huawei.com>
    blk-cgroup: fix UAF by grabbing blkcg lock before destroying blkg pd

Andreas Larsson <andreas@gaisler.com>
    sparc32: page align size in arch_dma_alloc

Anton Eidelman <anton.eidelman@gmail.com>
    nvme-multipath: fix ANA state updates when a namespace is not present

Juergen Gross <jgross@suse.com>
    xen/balloon: use a kernel thread instead a workqueue

Bixuan Cui <cuibixuan@huawei.com>
    bpf: Add oversize check before call kvcalloc()

zhang kai <zhangkaiheb@126.com>
    ipv6: delay fib6_sernum increase in fib6_add

Guenter Roeck <linux@roeck-us.net>
    m68k: Double cast io functions to unsigned long

Jesper Nilsson <jesper.nilsson@axis.com>
    net: stmmac: allow CSR clock of 300MHz

Tong Zhang <ztong0001@gmail.com>
    net: macb: fix use after free on rmmod

Zhihao Cheng <chengzhihao1@huawei.com>
    blktrace: Fix uaf in blk_trace access after removing by sysfs

Christoph Hellwig <hch@lst.de>
    md: fix a lock order reversal in md_alloc

Kaige Fu <kaige.fu@linux.alibaba.com>
    irqchip/gic-v3-its: Fix potential VPE leak on error

Randy Dunlap <rdunlap@infradead.org>
    irqchip/goldfish-pic: Select GENERIC_IRQ_CHIP to fix build

Dan Carpenter <dan.carpenter@oracle.com>
    scsi: lpfc: Use correct scnprintf() limit

Dmitry Bogdanov <d.bogdanov@yadro.com>
    scsi: qla2xxx: Restore initiator in dual mode

Dan Carpenter <dan.carpenter@oracle.com>
    cifs: fix a sign extension bug

Dan Carpenter <dan.carpenter@oracle.com>
    thermal/core: Potential buffer overflow in thermal_build_list_of_policies()

Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
    fpga: machxo2-spi: Fix missing error code in machxo2_write_complete()

Tom Rix <trix@redhat.com>
    fpga: machxo2-spi: Return an error on failure

Randy Dunlap <rdunlap@infradead.org>
    tty: synclink_gt: rename a conflicting function name

Jiri Slaby <jslaby@suse.cz>
    tty: synclink_gt, drop unneeded forward declarations

Baokun Li <libaokun1@huawei.com>
    scsi: iscsi: Adjust iface sysfs attr detection

Aya Levin <ayal@nvidia.com>
    net/mlx4_en: Don't allow aRFS for encapsulated packets

Shai Malin <smalin@marvell.com>
    qed: rdma - don't wait for resources under hw error recovery flow

Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
    gpio: uniphier: Fix void functions to remove return value

Karsten Graul <kgraul@linux.ibm.com>
    net/smc: add missing error check in smc_clc_prfx_set()

Michael Chan <michael.chan@broadcom.com>
    bnxt_en: Fix TX timeout when TX ring size is set to the smallest

Claudiu Manoil <claudiu.manoil@nxp.com>
    enetc: Fix illegal access when reading affinity_hint

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    platform/x86/intel: punit_ipc: Drop wrong use of ACPI_PTR()

David Howells <dhowells@redhat.com>
    afs: Fix incorrect triggering of sillyrename on 3rd-party invalidation

Johan Hovold <johan@kernel.org>
    net: hso: fix muxed tty registration

Pali Rohár <pali@kernel.org>
    serial: mvebu-uart: fix driver's tx_empty callback

Kishon Vijay Abraham I <kishon@ti.com>
    xhci: Set HCD flag to defer primary roothub registration

Qu Wenruo <wqu@suse.com>
    btrfs: prevent __btrfs_dump_space_info() to underflow its free space

Gao Xiang <hsiangkao@linux.alibaba.com>
    erofs: fix up erofs_lookup tracepoint

Dan Carpenter <dan.carpenter@oracle.com>
    mcb: fix error handling in mcb_alloc_bus()

Slark Xiao <slark_xiao@163.com>
    USB: serial: option: add device id for Foxconn T99W265

Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
    USB: serial: option: remove duplicate USB device ID

Carlo Lobrano <c.lobrano@gmail.com>
    USB: serial: option: add Telit LN920 compositions

Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
    USB: serial: mos7840: remove duplicated 0xac24 device ID

Kishon Vijay Abraham I <kishon@ti.com>
    usb: core: hcd: Add support for deferring roothub registration

Julian Sikorski <belegdol@gmail.com>
    Re-enable UAS for LaCie Rugged USB3-FW with fk quirk

Johan Hovold <johan@kernel.org>
    staging: greybus: uart: fix tty use after free

Todd Kjos <tkjos@google.com>
    binder: make sure fd closes complete

Johan Hovold <johan@kernel.org>
    USB: cdc-acm: fix minor-number release

Uwe Brandt <uwe.brandt@gmail.com>
    USB: serial: cp210x: add ID for GW Instek GDM-834x Digital Multimeter

Ondrej Zary <linux@zary.sk>
    usb-storage: Add quirk for ScanLogic SL11R-IDE older than 2.6c

Jan Beulich <jbeulich@suse.com>
    xen/x86: fix PV trap handling on secondary processors

Steve French <stfrench@microsoft.com>
    cifs: fix incorrect check for null pointer in header_assemble

Dan Carpenter <dan.carpenter@oracle.com>
    usb: musb: tusb6010: uninitialized data in tusb_fifo_write_unaligned()

Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
    usb: dwc2: gadget: Fix ISOC transfer complete handling for DDMA

Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
    usb: dwc2: gadget: Fix ISOC flow for BDMA and Slave

Dan Carpenter <dan.carpenter@oracle.com>
    usb: gadget: r8a66597: fix a loop in set_feature()

Wengang Wang <wen.gang.wang@oracle.com>
    ocfs2: drop acl cache for directories too


-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/alpha/include/asm/io.h                        |   6 +-
 .../boot/dts/marvell/armada-3720-turris-mox.dts    |  17 ++
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi       |  11 +-
 arch/arm64/kernel/process.c                        |   2 +-
 arch/m68k/include/asm/raw_io.h                     |  20 +--
 arch/parisc/include/asm/page.h                     |   2 +-
 arch/sparc/kernel/ioport.c                         |   4 +-
 arch/sparc/kernel/mdesc.c                          |   3 +-
 arch/x86/xen/enlighten_pv.c                        |  15 +-
 block/blk-cgroup.c                                 |   8 +
 drivers/android/binder.c                           |  23 ++-
 drivers/edac/synopsys_edac.c                       |   2 +-
 drivers/fpga/machxo2-spi.c                         |   6 +-
 drivers/gpio/gpio-uniphier.c                       |   4 +-
 drivers/irqchip/Kconfig                            |   1 +
 drivers/irqchip/irq-gic-v3-its.c                   |   2 +-
 drivers/mcb/mcb-core.c                             |  12 +-
 drivers/md/md.c                                    |   5 -
 drivers/net/ethernet/broadcom/bnxt/bnxt.c          |   8 +-
 drivers/net/ethernet/broadcom/bnxt/bnxt.h          |   5 +
 drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c  |   2 +-
 drivers/net/ethernet/cadence/macb_pci.c            |   2 +-
 drivers/net/ethernet/freescale/enetc/enetc.c       |   5 +-
 drivers/net/ethernet/i825xx/82596.c                |   2 +-
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c     |   3 +
 drivers/net/ethernet/qlogic/qed/qed_iwarp.c        |   8 +
 drivers/net/ethernet/qlogic/qed/qed_roce.c         |   8 +
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |   2 +-
 drivers/net/hamradio/6pack.c                       |   4 +-
 drivers/net/usb/hso.c                              |  12 +-
 drivers/nvme/host/multipath.c                      |   7 +-
 drivers/platform/x86/intel_punit_ipc.c             |   3 +-
 drivers/scsi/lpfc/lpfc_attr.c                      |   3 +-
 drivers/scsi/qla2xxx/qla_init.c                    |   3 +-
 drivers/scsi/scsi_transport_iscsi.c                |   8 +-
 drivers/spi/spi-tegra20-slink.c                    |   4 +-
 drivers/staging/greybus/uart.c                     |  62 +++----
 .../int340x_thermal/processor_thermal_device.c     |   5 +-
 drivers/thermal/thermal_core.c                     |   7 +-
 drivers/tty/serial/mvebu-uart.c                    |   2 +-
 drivers/tty/synclink_gt.c                          | 101 +++--------
 drivers/usb/class/cdc-acm.c                        |   7 +-
 drivers/usb/class/cdc-acm.h                        |   2 +
 drivers/usb/core/hcd.c                             |  29 +++-
 drivers/usb/dwc2/gadget.c                          | 193 ++++++++++++---------
 drivers/usb/gadget/udc/r8a66597-udc.c              |   2 +-
 drivers/usb/host/xhci.c                            |   1 +
 drivers/usb/musb/tusb6010.c                        |   1 +
 drivers/usb/serial/cp210x.c                        |   1 +
 drivers/usb/serial/mos7840.c                       |   2 -
 drivers/usb/serial/option.c                        |  11 +-
 drivers/usb/storage/unusual_devs.h                 |   9 +-
 drivers/usb/storage/unusual_uas.h                  |   2 +-
 drivers/xen/balloon.c                              |  62 +++++--
 fs/afs/dir.c                                       |  46 +----
 fs/btrfs/space-info.c                              |   5 +-
 fs/cifs/connect.c                                  |   5 +-
 fs/cifs/file.c                                     |   2 +-
 fs/ocfs2/dlmglue.c                                 |   3 +-
 fs/qnx4/dir.c                                      |  69 ++++++--
 include/linux/compiler.h                           |   2 +
 include/linux/usb/hcd.h                            |   2 +
 include/trace/events/erofs.h                       |   6 +-
 kernel/bpf/verifier.c                              |   2 +
 kernel/trace/blktrace.c                            |   8 +
 net/ipv6/ip6_fib.c                                 |   3 +-
 net/smc/smc_clc.c                                  |   3 +-
 68 files changed, 509 insertions(+), 382 deletions(-)

[PATCH 5.4 01/68] ocfs2: drop acl cache for directories too

[Greg Kroah-Hartman]

From: Wengang Wang <wen.gang.wang@oracle.com>

commit 9c0f0a03e386f4e1df33db676401547e1b7800c6 upstream.

ocfs2_data_convert_worker() is currently dropping any cached acl info
for FILE before down-converting meta lock.  It should also drop for
DIRECTORY.  Otherwise the second acl lookup returns the cached one (from
VFS layer) which could be already stale.

The problem we are seeing is that the acl changes on one node doesn't
get refreshed on other nodes in the following case:

  Node 1                    Node 2
  --------------            ----------------
  getfacl dir1

                            getfacl dir1    <-- this is OK

  setfacl -m u:user1:rwX dir1
  getfacl dir1   <-- see the change for user1

                            getfacl dir1    <-- can't see change for user1

Link: https://lkml.kernel.org/r/20210903012631.6099-1-wen.gang.wang@oracle.com
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ocfs2/dlmglue.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -3933,7 +3933,7 @@ static int ocfs2_data_convert_worker(str
 		oi = OCFS2_I(inode);
 		oi->ip_dir_lock_gen++;
 		mlog(0, "generation: %u\n", oi->ip_dir_lock_gen);
-		goto out;
+		goto out_forget;
 	}
 
 	if (!S_ISREG(inode->i_mode))
@@ -3964,6 +3964,7 @@ static int ocfs2_data_convert_worker(str
 		filemap_fdatawait(mapping);
 	}
 
+out_forget:
 	forget_all_cached_acls(inode);
 
 out:

[PATCH 5.4 02/68] usb: gadget: r8a66597: fix a loop in set_feature()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 17956b53ebff6a490baf580a836cbd3eae94892b upstream.

This loop is supposed to loop until if reads something other than
CS_IDST or until it times out after 30,000 attempts.  But because of
the || vs && bug, it will never time out and instead it will loop a
minimum of 30,000 times.

This bug is quite old but the code is only used in USB_DEVICE_TEST_MODE
so it probably doesn't affect regular usage.

Fixes: 96fe53ef5498 ("usb: gadget: r8a66597-udc: add support for TEST_MODE")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210906094221.GA10957@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/udc/r8a66597-udc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/gadget/udc/r8a66597-udc.c
+++ b/drivers/usb/gadget/udc/r8a66597-udc.c
@@ -1250,7 +1250,7 @@ static void set_feature(struct r8a66597
 			do {
 				tmp = r8a66597_read(r8a66597, INTSTS0) & CTSQ;
 				udelay(1);
-			} while (tmp != CS_IDST || timeout-- > 0);
+			} while (tmp != CS_IDST && timeout-- > 0);
 
 			if (tmp == CS_IDST)
 				r8a66597_bset(r8a66597,

[PATCH 5.4 03/68] usb: dwc2: gadget: Fix ISOC flow for BDMA and Slave

[Greg Kroah-Hartman]

From: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>

commit 91bb163e1e4f88092f50dfaa5a816b658753e4b2 upstream.

According USB spec each ISOC transaction should be performed in a
designated for that transaction interval. On bus errors or delays
in operating system scheduling of client software can result in no
packet being transferred for a (micro)frame. An error indication
should be returned as status to the client software in such a case.

Current implementation in case of missed/dropped interval send same
data in next possible interval instead of reporting missed isoc.

This fix complete requests with -ENODATA if interval elapsed.

HSOTG core in BDMA and Slave modes haven't HW support for
(micro)frames tracking, this is why SW should care about tracking
of (micro)frames. Because of that method and consider operating
system scheduling delays, added few additional checking's of elapsed
target (micro)frame:
1. Immediately before enabling EP to start transfer.
2. With any transfer completion interrupt.
3. With incomplete isoc in/out interrupt.
4. With EP disabled interrupt because of incomplete transfer.
5. With OUT token received while EP disabled interrupt (for OUT
transfers).
6. With NAK replied to IN token interrupt (for IN transfers).

As part of ISOC flow, additionally fixed 'current' and 'target' frame
calculation functions. In HS mode SOF limits provided by DSTS register
is 0x3fff, but in non HS mode this limit is 0x7ff.

Tested by internal tool which also using for dwc3 testing.

Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/95d1423adf4b0f68187c9894820c4b7e964a3f7f.1631175721.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc2/gadget.c |  189 +++++++++++++++++++++++++---------------------
 1 file changed, 106 insertions(+), 83 deletions(-)

--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -115,10 +115,16 @@ static inline bool using_desc_dma(struct
  */
 static inline void dwc2_gadget_incr_frame_num(struct dwc2_hsotg_ep *hs_ep)
 {
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+	u16 limit = DSTS_SOFFN_LIMIT;
+
+	if (hsotg->gadget.speed != USB_SPEED_HIGH)
+		limit >>= 3;
+
 	hs_ep->target_frame += hs_ep->interval;
-	if (hs_ep->target_frame > DSTS_SOFFN_LIMIT) {
+	if (hs_ep->target_frame > limit) {
 		hs_ep->frame_overrun = true;
-		hs_ep->target_frame &= DSTS_SOFFN_LIMIT;
+		hs_ep->target_frame &= limit;
 	} else {
 		hs_ep->frame_overrun = false;
 	}
@@ -136,10 +142,16 @@ static inline void dwc2_gadget_incr_fram
  */
 static inline void dwc2_gadget_dec_frame_num_by_one(struct dwc2_hsotg_ep *hs_ep)
 {
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+	u16 limit = DSTS_SOFFN_LIMIT;
+
+	if (hsotg->gadget.speed != USB_SPEED_HIGH)
+		limit >>= 3;
+
 	if (hs_ep->target_frame)
 		hs_ep->target_frame -= 1;
 	else
-		hs_ep->target_frame = DSTS_SOFFN_LIMIT;
+		hs_ep->target_frame = limit;
 }
 
 /**
@@ -1018,6 +1030,12 @@ static void dwc2_gadget_start_isoc_ddma(
 	dwc2_writel(hsotg, ctrl, depctl);
 }
 
+static bool dwc2_gadget_target_frame_elapsed(struct dwc2_hsotg_ep *hs_ep);
+static void dwc2_hsotg_complete_request(struct dwc2_hsotg *hsotg,
+					struct dwc2_hsotg_ep *hs_ep,
+				       struct dwc2_hsotg_req *hs_req,
+				       int result);
+
 /**
  * dwc2_hsotg_start_req - start a USB request from an endpoint's queue
  * @hsotg: The controller state.
@@ -1170,14 +1188,19 @@ static void dwc2_hsotg_start_req(struct
 		}
 	}
 
-	if (hs_ep->isochronous && hs_ep->interval == 1) {
-		hs_ep->target_frame = dwc2_hsotg_read_frameno(hsotg);
-		dwc2_gadget_incr_frame_num(hs_ep);
-
-		if (hs_ep->target_frame & 0x1)
-			ctrl |= DXEPCTL_SETODDFR;
-		else
-			ctrl |= DXEPCTL_SETEVENFR;
+	if (hs_ep->isochronous) {
+		if (!dwc2_gadget_target_frame_elapsed(hs_ep)) {
+			if (hs_ep->interval == 1) {
+				if (hs_ep->target_frame & 0x1)
+					ctrl |= DXEPCTL_SETODDFR;
+				else
+					ctrl |= DXEPCTL_SETEVENFR;
+			}
+			ctrl |= DXEPCTL_CNAK;
+		} else {
+			dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, -ENODATA);
+			return;
+		}
 	}
 
 	ctrl |= DXEPCTL_EPENA;	/* ensure ep enabled */
@@ -1325,12 +1348,16 @@ static bool dwc2_gadget_target_frame_ela
 	u32 target_frame = hs_ep->target_frame;
 	u32 current_frame = hsotg->frame_number;
 	bool frame_overrun = hs_ep->frame_overrun;
+	u16 limit = DSTS_SOFFN_LIMIT;
+
+	if (hsotg->gadget.speed != USB_SPEED_HIGH)
+		limit >>= 3;
 
 	if (!frame_overrun && current_frame >= target_frame)
 		return true;
 
 	if (frame_overrun && current_frame >= target_frame &&
-	    ((current_frame - target_frame) < DSTS_SOFFN_LIMIT / 2))
+	    ((current_frame - target_frame) < limit / 2))
 		return true;
 
 	return false;
@@ -1712,11 +1739,9 @@ static struct dwc2_hsotg_req *get_ep_hea
  */
 static void dwc2_gadget_start_next_request(struct dwc2_hsotg_ep *hs_ep)
 {
-	u32 mask;
 	struct dwc2_hsotg *hsotg = hs_ep->parent;
 	int dir_in = hs_ep->dir_in;
 	struct dwc2_hsotg_req *hs_req;
-	u32 epmsk_reg = dir_in ? DIEPMSK : DOEPMSK;
 
 	if (!list_empty(&hs_ep->queue)) {
 		hs_req = get_ep_head(hs_ep);
@@ -1732,9 +1757,6 @@ static void dwc2_gadget_start_next_reque
 	} else {
 		dev_dbg(hsotg->dev, "%s: No more ISOC-OUT requests\n",
 			__func__);
-		mask = dwc2_readl(hsotg, epmsk_reg);
-		mask |= DOEPMSK_OUTTKNEPDISMSK;
-		dwc2_writel(hsotg, mask, epmsk_reg);
 	}
 }
 
@@ -2304,19 +2326,6 @@ static void dwc2_hsotg_ep0_zlp(struct dw
 	dwc2_hsotg_program_zlp(hsotg, hsotg->eps_out[0]);
 }
 
-static void dwc2_hsotg_change_ep_iso_parity(struct dwc2_hsotg *hsotg,
-					    u32 epctl_reg)
-{
-	u32 ctrl;
-
-	ctrl = dwc2_readl(hsotg, epctl_reg);
-	if (ctrl & DXEPCTL_EOFRNUM)
-		ctrl |= DXEPCTL_SETEVENFR;
-	else
-		ctrl |= DXEPCTL_SETODDFR;
-	dwc2_writel(hsotg, ctrl, epctl_reg);
-}
-
 /*
  * dwc2_gadget_get_xfersize_ddma - get transferred bytes amount from desc
  * @hs_ep - The endpoint on which transfer went
@@ -2437,20 +2446,11 @@ static void dwc2_hsotg_handle_outdone(st
 			dwc2_hsotg_ep0_zlp(hsotg, true);
 	}
 
-	/*
-	 * Slave mode OUT transfers do not go through XferComplete so
-	 * adjust the ISOC parity here.
-	 */
-	if (!using_dma(hsotg)) {
-		if (hs_ep->isochronous && hs_ep->interval == 1)
-			dwc2_hsotg_change_ep_iso_parity(hsotg, DOEPCTL(epnum));
-		else if (hs_ep->isochronous && hs_ep->interval > 1)
-			dwc2_gadget_incr_frame_num(hs_ep);
-	}
-
 	/* Set actual frame number for completed transfers */
-	if (!using_desc_dma(hsotg) && hs_ep->isochronous)
-		req->frame_number = hsotg->frame_number;
+	if (!using_desc_dma(hsotg) && hs_ep->isochronous) {
+		req->frame_number = hs_ep->target_frame;
+		dwc2_gadget_incr_frame_num(hs_ep);
+	}
 
 	dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, result);
 }
@@ -2764,6 +2764,12 @@ static void dwc2_hsotg_complete_in(struc
 		return;
 	}
 
+	/* Set actual frame number for completed transfers */
+	if (!using_desc_dma(hsotg) && hs_ep->isochronous) {
+		hs_req->req.frame_number = hs_ep->target_frame;
+		dwc2_gadget_incr_frame_num(hs_ep);
+	}
+
 	dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, 0);
 }
 
@@ -2824,23 +2830,18 @@ static void dwc2_gadget_handle_ep_disabl
 
 		dwc2_hsotg_txfifo_flush(hsotg, hs_ep->fifo_index);
 
-		if (hs_ep->isochronous) {
-			dwc2_hsotg_complete_in(hsotg, hs_ep);
-			return;
-		}
-
 		if ((epctl & DXEPCTL_STALL) && (epctl & DXEPCTL_EPTYPE_BULK)) {
 			int dctl = dwc2_readl(hsotg, DCTL);
 
 			dctl |= DCTL_CGNPINNAK;
 			dwc2_writel(hsotg, dctl, DCTL);
 		}
-		return;
-	}
+	} else {
 
-	if (dctl & DCTL_GOUTNAKSTS) {
-		dctl |= DCTL_CGOUTNAK;
-		dwc2_writel(hsotg, dctl, DCTL);
+		if (dctl & DCTL_GOUTNAKSTS) {
+			dctl |= DCTL_CGOUTNAK;
+			dwc2_writel(hsotg, dctl, DCTL);
+		}
 	}
 
 	if (!hs_ep->isochronous)
@@ -2861,8 +2862,6 @@ static void dwc2_gadget_handle_ep_disabl
 		/* Update current frame number value. */
 		hsotg->frame_number = dwc2_hsotg_read_frameno(hsotg);
 	} while (dwc2_gadget_target_frame_elapsed(hs_ep));
-
-	dwc2_gadget_start_next_request(hs_ep);
 }
 
 /**
@@ -2879,8 +2878,8 @@ static void dwc2_gadget_handle_ep_disabl
 static void dwc2_gadget_handle_out_token_ep_disabled(struct dwc2_hsotg_ep *ep)
 {
 	struct dwc2_hsotg *hsotg = ep->parent;
+	struct dwc2_hsotg_req *hs_req;
 	int dir_in = ep->dir_in;
-	u32 doepmsk;
 
 	if (dir_in || !ep->isochronous)
 		return;
@@ -2894,28 +2893,39 @@ static void dwc2_gadget_handle_out_token
 		return;
 	}
 
-	if (ep->interval > 1 &&
-	    ep->target_frame == TARGET_FRAME_INITIAL) {
+	if (ep->target_frame == TARGET_FRAME_INITIAL) {
 		u32 ctrl;
 
 		ep->target_frame = hsotg->frame_number;
-		dwc2_gadget_incr_frame_num(ep);
+		if (ep->interval > 1) {
+			ctrl = dwc2_readl(hsotg, DOEPCTL(ep->index));
+			if (ep->target_frame & 0x1)
+				ctrl |= DXEPCTL_SETODDFR;
+			else
+				ctrl |= DXEPCTL_SETEVENFR;
 
-		ctrl = dwc2_readl(hsotg, DOEPCTL(ep->index));
-		if (ep->target_frame & 0x1)
-			ctrl |= DXEPCTL_SETODDFR;
-		else
-			ctrl |= DXEPCTL_SETEVENFR;
+			dwc2_writel(hsotg, ctrl, DOEPCTL(ep->index));
+		}
+	}
+
+	while (dwc2_gadget_target_frame_elapsed(ep)) {
+		hs_req = get_ep_head(ep);
+		if (hs_req)
+			dwc2_hsotg_complete_request(hsotg, ep, hs_req, -ENODATA);
 
-		dwc2_writel(hsotg, ctrl, DOEPCTL(ep->index));
+		dwc2_gadget_incr_frame_num(ep);
+		/* Update current frame number value. */
+		hsotg->frame_number = dwc2_hsotg_read_frameno(hsotg);
 	}
 
-	dwc2_gadget_start_next_request(ep);
-	doepmsk = dwc2_readl(hsotg, DOEPMSK);
-	doepmsk &= ~DOEPMSK_OUTTKNEPDISMSK;
-	dwc2_writel(hsotg, doepmsk, DOEPMSK);
+	if (!ep->req)
+		dwc2_gadget_start_next_request(ep);
+
 }
 
+static void dwc2_hsotg_ep_stop_xfr(struct dwc2_hsotg *hsotg,
+				   struct dwc2_hsotg_ep *hs_ep);
+
 /**
  * dwc2_gadget_handle_nak - handle NAK interrupt
  * @hs_ep: The endpoint on which interrupt is asserted.
@@ -2933,7 +2943,9 @@ static void dwc2_gadget_handle_out_token
 static void dwc2_gadget_handle_nak(struct dwc2_hsotg_ep *hs_ep)
 {
 	struct dwc2_hsotg *hsotg = hs_ep->parent;
+	struct dwc2_hsotg_req *hs_req;
 	int dir_in = hs_ep->dir_in;
+	u32 ctrl;
 
 	if (!dir_in || !hs_ep->isochronous)
 		return;
@@ -2975,13 +2987,29 @@ static void dwc2_gadget_handle_nak(struc
 
 			dwc2_writel(hsotg, ctrl, DIEPCTL(hs_ep->index));
 		}
-
-		dwc2_hsotg_complete_request(hsotg, hs_ep,
-					    get_ep_head(hs_ep), 0);
 	}
 
-	if (!using_desc_dma(hsotg))
+	if (using_desc_dma(hsotg))
+		return;
+
+	ctrl = dwc2_readl(hsotg, DIEPCTL(hs_ep->index));
+	if (ctrl & DXEPCTL_EPENA)
+		dwc2_hsotg_ep_stop_xfr(hsotg, hs_ep);
+	else
+		dwc2_hsotg_txfifo_flush(hsotg, hs_ep->fifo_index);
+
+	while (dwc2_gadget_target_frame_elapsed(hs_ep)) {
+		hs_req = get_ep_head(hs_ep);
+		if (hs_req)
+			dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, -ENODATA);
+
 		dwc2_gadget_incr_frame_num(hs_ep);
+		/* Update current frame number value. */
+		hsotg->frame_number = dwc2_hsotg_read_frameno(hsotg);
+	}
+
+	if (!hs_ep->req)
+		dwc2_gadget_start_next_request(hs_ep);
 }
 
 /**
@@ -3048,12 +3076,8 @@ static void dwc2_hsotg_epint(struct dwc2
 			 * need to look at completing IN requests here
 			 * if operating slave mode
 			 */
-			if (hs_ep->isochronous && hs_ep->interval > 1)
-				dwc2_gadget_incr_frame_num(hs_ep);
-
-			dwc2_hsotg_complete_in(hsotg, hs_ep);
-			if (ints & DXEPINT_NAKINTRPT)
-				ints &= ~DXEPINT_NAKINTRPT;
+			if (!hs_ep->isochronous || !(ints & DXEPINT_NAKINTRPT))
+				dwc2_hsotg_complete_in(hsotg, hs_ep);
 
 			if (idx == 0 && !hs_ep->req)
 				dwc2_hsotg_enqueue_setup(hsotg);
@@ -3062,10 +3086,8 @@ static void dwc2_hsotg_epint(struct dwc2
 			 * We're using DMA, we need to fire an OutDone here
 			 * as we ignore the RXFIFO.
 			 */
-			if (hs_ep->isochronous && hs_ep->interval > 1)
-				dwc2_gadget_incr_frame_num(hs_ep);
-
-			dwc2_hsotg_handle_outdone(hsotg, idx);
+			if (!hs_ep->isochronous || !(ints & DXEPINT_OUTTKNEPDIS))
+				dwc2_hsotg_handle_outdone(hsotg, idx);
 		}
 	}
 
@@ -4055,6 +4077,7 @@ static int dwc2_hsotg_ep_enable(struct u
 			mask |= DIEPMSK_NAKMSK;
 			dwc2_writel(hsotg, mask, DIEPMSK);
 		} else {
+			epctrl |= DXEPCTL_SNAK;
 			mask = dwc2_readl(hsotg, DOEPMSK);
 			mask |= DOEPMSK_OUTTKNEPDISMSK;
 			dwc2_writel(hsotg, mask, DOEPMSK);

[PATCH 5.4 04/68] usb: dwc2: gadget: Fix ISOC transfer complete handling for DDMA

[Greg Kroah-Hartman]

From: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>

commit dbe2518b2d8eabffa74dbf7d9fdd7dacddab7fc0 upstream.

When last descriptor in a descriptor list completed with XferComplete
interrupt, core switching to handle next descriptor and assert BNA
interrupt. Both these interrupts are set while dwc2_hsotg_epint()
handler called. Each interrupt should be handled separately: first
XferComplete interrupt then BNA interrupt, otherwise last completed
transfer will not be giveback to function driver as completed
request.

Fixes: 729cac693eec ("usb: dwc2: Change ISOC DDMA flow")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/a36981accc26cd674c5d8f8da6164344b94ec1fe.1631386531.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc2/gadget.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -3067,9 +3067,7 @@ static void dwc2_hsotg_epint(struct dwc2
 
 		/* In DDMA handle isochronous requests separately */
 		if (using_desc_dma(hsotg) && hs_ep->isochronous) {
-			/* XferCompl set along with BNA */
-			if (!(ints & DXEPINT_BNAINTR))
-				dwc2_gadget_complete_isoc_request_ddma(hs_ep);
+			dwc2_gadget_complete_isoc_request_ddma(hs_ep);
 		} else if (dir_in) {
 			/*
 			 * We get OutDone from the FIFO, so we only

[PATCH 5.4 05/68] usb: musb: tusb6010: uninitialized data in tusb_fifo_write_unaligned()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 517c7bf99bad3d6b9360558414aae634b7472d80 upstream.

This is writing to the first 1 - 3 bytes of "val" and then writing all
four bytes to musb_writel().  The last byte is always going to be
garbage.  Zero out the last bytes instead.

Fixes: 550a7375fe72 ("USB: Add MUSB and TUSB support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210916135737.GI25094@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/musb/tusb6010.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -190,6 +190,7 @@ tusb_fifo_write_unaligned(void __iomem *
 	}
 	if (len > 0) {
 		/* Write the rest 1 - 3 bytes to FIFO */
+		val = 0;
 		memcpy(&val, buf, len);
 		musb_writel(fifo, 0, val);
 	}

[PATCH 5.4 06/68] cifs: fix incorrect check for null pointer in header_assemble

[Greg Kroah-Hartman]

From: Steve French <stfrench@microsoft.com>

commit 9ed38fd4a15417cac83967360cf20b853bfab9b6 upstream.

Although very unlikely that the tlink pointer would be null in this case,
get_next_mid function can in theory return null (but not an error)
so need to check for null (not for IS_ERR, which can not be returned
here).

Address warning:

        fs/smbfs_client/connect.c:2392 cifs_match_super()
        warn: 'tlink' isn't an ERR_PTR

Pointed out by Dan Carpenter via smatch code analysis tool

CC: stable@vger.kernel.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/cifs/connect.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -3691,9 +3691,10 @@ cifs_match_super(struct super_block *sb,
 	spin_lock(&cifs_tcp_ses_lock);
 	cifs_sb = CIFS_SB(sb);
 	tlink = cifs_get_tlink(cifs_sb_master_tlink(cifs_sb));
-	if (IS_ERR(tlink)) {
+	if (tlink == NULL) {
+		/* can not match superblock if tlink were ever null */
 		spin_unlock(&cifs_tcp_ses_lock);
-		return rc;
+		return 0;
 	}
 	tcon = tlink_tcon(tlink);
 	ses = tcon->ses;

[PATCH 5.4 07/68] xen/x86: fix PV trap handling on secondary processors

[Greg Kroah-Hartman]

From: Jan Beulich <jbeulich@suse.com>

commit 0594c58161b6e0f3da8efa9c6e3d4ba52b652717 upstream.

The initial observation was that in PV mode under Xen 32-bit user space
didn't work anymore. Attempts of system calls ended in #GP(0x402). All
of the sudden the vector 0x80 handler was not in place anymore. As it
turns out up to 5.13 redundant initialization did occur: Once from
cpu_initialize_context() (through its VCPUOP_initialise hypercall) and a
2nd time while each CPU was brought fully up. This 2nd initialization is
now gone, uncovering that the 1st one was flawed: Unlike for the
set_trap_table hypercall, a full virtual IDT needs to be specified here;
the "vector" fields of the individual entries are of no interest. With
many (kernel) IDT entries still(?) (i.e. at that point at least) empty,
the syscall vector 0x80 ended up in slot 0x20 of the virtual IDT, thus
becoming the domain's handler for vector 0x20.

Make xen_convert_trap_info() fit for either purpose, leveraging the fact
that on the xen_copy_trap_info() path the table starts out zero-filled.
This includes moving out the writing of the sentinel, which would also
have lead to a buffer overrun in the xen_copy_trap_info() case if all
(kernel) IDT entries were populated. Convert the writing of the sentinel
to clearing of the entire table entry rather than just the address
field.

(I didn't bother trying to identify the commit which uncovered the issue
in 5.14; the commit named below is the one which actually introduced the
bad code.)

Fixes: f87e4cac4f4e ("xen: SMP guest support")
Cc: stable@vger.kernel.org
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/7a266932-092e-b68f-f2bb-1473b61adc6e@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/xen/enlighten_pv.c |   15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

--- a/arch/x86/xen/enlighten_pv.c
+++ b/arch/x86/xen/enlighten_pv.c
@@ -727,8 +727,8 @@ static void xen_write_idt_entry(gate_des
 	preempt_enable();
 }
 
-static void xen_convert_trap_info(const struct desc_ptr *desc,
-				  struct trap_info *traps)
+static unsigned xen_convert_trap_info(const struct desc_ptr *desc,
+				      struct trap_info *traps, bool full)
 {
 	unsigned in, out, count;
 
@@ -738,17 +738,18 @@ static void xen_convert_trap_info(const
 	for (in = out = 0; in < count; in++) {
 		gate_desc *entry = (gate_desc *)(desc->address) + in;
 
-		if (cvt_gate_to_trap(in, entry, &traps[out]))
+		if (cvt_gate_to_trap(in, entry, &traps[out]) || full)
 			out++;
 	}
-	traps[out].address = 0;
+
+	return out;
 }
 
 void xen_copy_trap_info(struct trap_info *traps)
 {
 	const struct desc_ptr *desc = this_cpu_ptr(&idt_desc);
 
-	xen_convert_trap_info(desc, traps);
+	xen_convert_trap_info(desc, traps, true);
 }
 
 /* Load a new IDT into Xen.  In principle this can be per-CPU, so we
@@ -758,6 +759,7 @@ static void xen_load_idt(const struct de
 {
 	static DEFINE_SPINLOCK(lock);
 	static struct trap_info traps[257];
+	unsigned out;
 
 	trace_xen_cpu_load_idt(desc);
 
@@ -765,7 +767,8 @@ static void xen_load_idt(const struct de
 
 	memcpy(this_cpu_ptr(&idt_desc), desc, sizeof(idt_desc));
 
-	xen_convert_trap_info(desc, traps);
+	out = xen_convert_trap_info(desc, traps, false);
+	memset(&traps[out], 0, sizeof(traps[0]));
 
 	xen_mc_flush();
 	if (HYPERVISOR_set_trap_table(traps))

[PATCH 5.4 08/68] usb-storage: Add quirk for ScanLogic SL11R-IDE older than 2.6c

[Greg Kroah-Hartman]

From: Ondrej Zary <linux@zary.sk>

commit b55d37ef6b7db3eda9b4495a8d9b0a944ee8c67d upstream.

ScanLogic SL11R-IDE with firmware older than 2.6c (the latest one) has
broken tag handling, preventing the device from working at all:
usb 1-1: new full-speed USB device number 2 using uhci_hcd
usb 1-1: New USB device found, idVendor=04ce, idProduct=0002, bcdDevice= 2.60
usb 1-1: New USB device strings: Mfr=1, Product=1, SerialNumber=0
usb 1-1: Product: USB Device
usb 1-1: Manufacturer: USB Device
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi host2: usb-storage 1-1:1.0
usbcore: registered new interface driver usb-storage
usb 1-1: reset full-speed USB device number 2 using uhci_hcd
usb 1-1: reset full-speed USB device number 2 using uhci_hcd
usb 1-1: reset full-speed USB device number 2 using uhci_hcd
usb 1-1: reset full-speed USB device number 2 using uhci_hcd

Add US_FL_BULK_IGNORE_TAG to fix it. Also update my e-mail address.

2.6c is the only firmware that claims Linux compatibility.
The firmware can be upgraded using ezotgdbg utility:
https://github.com/asciilifeform/ezotgdbg

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ondrej Zary <linux@zary.sk>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210913210106.12717-1-linux@zary.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/storage/unusual_devs.h |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -416,9 +416,16 @@ UNUSUAL_DEV(  0x04cb, 0x0100, 0x0000, 0x
 		USB_SC_UFI, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN),
 
 /*
- * Reported by Ondrej Zary <linux@rainbow-software.org>
+ * Reported by Ondrej Zary <linux@zary.sk>
  * The device reports one sector more and breaks when that sector is accessed
+ * Firmwares older than 2.6c (the latest one and the only that claims Linux
+ * support) have also broken tag handling
  */
+UNUSUAL_DEV(  0x04ce, 0x0002, 0x0000, 0x026b,
+		"ScanLogic",
+		"SL11R-IDE",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY | US_FL_BULK_IGNORE_TAG),
 UNUSUAL_DEV(  0x04ce, 0x0002, 0x026c, 0x026c,
 		"ScanLogic",
 		"SL11R-IDE",

[PATCH 5.4 09/68] USB: serial: cp210x: add ID for GW Instek GDM-834x Digital Multimeter

[Greg Kroah-Hartman]

From: Uwe Brandt <uwe.brandt@gmail.com>

commit 3bd18ba7d859eb1fbef3beb1e80c24f6f7d7596c upstream.

Add the USB serial device ID for the GW Instek GDM-834x Digital Multimeter.

Signed-off-by: Uwe Brandt <uwe.brandt@gmail.com>
Link: https://lore.kernel.org/r/YUxFl3YUCPGJZd8Y@hovoldconsulting.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/cp210x.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -234,6 +234,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x1FB9, 0x0602) }, /* Lake Shore Model 648 Magnet Power Supply */
 	{ USB_DEVICE(0x1FB9, 0x0700) }, /* Lake Shore Model 737 VSM Controller */
 	{ USB_DEVICE(0x1FB9, 0x0701) }, /* Lake Shore Model 776 Hall Matrix */
+	{ USB_DEVICE(0x2184, 0x0030) }, /* GW Instek GDM-834x Digital Multimeter */
 	{ USB_DEVICE(0x2626, 0xEA60) }, /* Aruba Networks 7xxx USB Serial Console */
 	{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
 	{ USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */

[PATCH 5.4 10/68] USB: cdc-acm: fix minor-number release

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 91fac0741d4817945c6ee0a17591421e7f5ecb86 upstream.

If the driver runs out of minor numbers it would release minor 0 and
allow another device to claim the minor while still in use.

Fortunately, registering the tty class device of the second device would
fail (with a stack dump) due to the sysfs name collision so no memory is
leaked.

Fixes: cae2bc768d17 ("usb: cdc-acm: Decrement tty port's refcount if probe() fail")
Cc: stable@vger.kernel.org      # 4.19
Cc: Jaejoong Kim <climbbb.kim@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210907082318.7757-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/class/cdc-acm.c |    7 +++++--
 drivers/usb/class/cdc-acm.h |    2 ++
 2 files changed, 7 insertions(+), 2 deletions(-)

--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -725,7 +725,8 @@ static void acm_port_destruct(struct tty
 {
 	struct acm *acm = container_of(port, struct acm, port);
 
-	acm_release_minor(acm);
+	if (acm->minor != ACM_MINOR_INVALID)
+		acm_release_minor(acm);
 	usb_put_intf(acm->control);
 	kfree(acm->country_codes);
 	kfree(acm);
@@ -1356,8 +1357,10 @@ made_compressed_probe:
 	usb_get_intf(acm->control); /* undone in destruct() */
 
 	minor = acm_alloc_minor(acm);
-	if (minor < 0)
+	if (minor < 0) {
+		acm->minor = ACM_MINOR_INVALID;
 		goto alloc_fail1;
+	}
 
 	acm->minor = minor;
 	acm->dev = usb_dev;
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -22,6 +22,8 @@
 #define ACM_TTY_MAJOR		166
 #define ACM_TTY_MINORS		256
 
+#define ACM_MINOR_INVALID	ACM_TTY_MINORS
+
 /*
  * Requests.
  */

[PATCH 5.4 11/68] binder: make sure fd closes complete

[Greg Kroah-Hartman]

From: Todd Kjos <tkjos@google.com>

commit 5fdb55c1ac9585eb23bb2541d5819224429e103d upstream.

During BC_FREE_BUFFER processing, the BINDER_TYPE_FDA object
cleanup may close 1 or more fds. The close operations are
completed using the task work mechanism -- which means the thread
needs to return to userspace or the file object may never be
dereferenced -- which can lead to hung processes.

Force the binder thread back to userspace if an fd is closed during
BC_FREE_BUFFER handling.

Fixes: 80cd795630d6 ("binder: fix use-after-free due to ksys_close() during fdget()")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Martijn Coenen <maco@android.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20210830195146.587206-1-tkjos@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/android/binder.c |   23 +++++++++++++++++------
 1 file changed, 17 insertions(+), 6 deletions(-)

--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -2239,6 +2239,7 @@ static void binder_deferred_fd_close(int
 }
 
 static void binder_transaction_buffer_release(struct binder_proc *proc,
+					      struct binder_thread *thread,
 					      struct binder_buffer *buffer,
 					      binder_size_t failed_at,
 					      bool is_failure)
@@ -2398,8 +2399,16 @@ static void binder_transaction_buffer_re
 						&proc->alloc, &fd, buffer,
 						offset, sizeof(fd));
 				WARN_ON(err);
-				if (!err)
+				if (!err) {
 					binder_deferred_fd_close(fd);
+					/*
+					 * Need to make sure the thread goes
+					 * back to userspace to complete the
+					 * deferred close
+					 */
+					if (thread)
+						thread->looper_need_return = true;
+				}
 			}
 		} break;
 		default:
@@ -3469,7 +3478,7 @@ err_bad_parent:
 err_copy_data_failed:
 	binder_free_txn_fixups(t);
 	trace_binder_transaction_failed_buffer_release(t->buffer);
-	binder_transaction_buffer_release(target_proc, t->buffer,
+	binder_transaction_buffer_release(target_proc, NULL, t->buffer,
 					  buffer_offset, true);
 	if (target_node)
 		binder_dec_node_tmpref(target_node);
@@ -3546,7 +3555,9 @@ err_invalid_target_handle:
  * Cleanup buffer and free it.
  */
 static void
-binder_free_buf(struct binder_proc *proc, struct binder_buffer *buffer)
+binder_free_buf(struct binder_proc *proc,
+		struct binder_thread *thread,
+		struct binder_buffer *buffer)
 {
 	binder_inner_proc_lock(proc);
 	if (buffer->transaction) {
@@ -3574,7 +3585,7 @@ binder_free_buf(struct binder_proc *proc
 		binder_node_inner_unlock(buf_node);
 	}
 	trace_binder_transaction_buffer_release(buffer);
-	binder_transaction_buffer_release(proc, buffer, 0, false);
+	binder_transaction_buffer_release(proc, thread, buffer, 0, false);
 	binder_alloc_free_buf(&proc->alloc, buffer);
 }
 
@@ -3775,7 +3786,7 @@ static int binder_thread_write(struct bi
 				     proc->pid, thread->pid, (u64)data_ptr,
 				     buffer->debug_id,
 				     buffer->transaction ? "active" : "finished");
-			binder_free_buf(proc, buffer);
+			binder_free_buf(proc, thread, buffer);
 			break;
 		}
 
@@ -4463,7 +4474,7 @@ retry:
 			buffer->transaction = NULL;
 			binder_cleanup_transaction(t, "fd fixups failed",
 						   BR_FAILED_REPLY);
-			binder_free_buf(proc, buffer);
+			binder_free_buf(proc, thread, buffer);
 			binder_debug(BINDER_DEBUG_FAILED_TRANSACTION,
 				     "%d:%d %stransaction %d fd fixups failed %d/%d, line %d\n",
 				     proc->pid, thread->pid,

[PATCH 5.4 12/68] staging: greybus: uart: fix tty use after free

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 92dc0b1f46e12cfabd28d709bb34f7a39431b44f upstream.

User space can hold a tty open indefinitely and tty drivers must not
release the underlying structures until the last user is gone.

Switch to using the tty-port reference counter to manage the life time
of the greybus tty state to avoid use after free after a disconnect.

Fixes: a18e15175708 ("greybus: more uart work")
Cc: stable@vger.kernel.org      # 4.9
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210906124538.22358-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/greybus/uart.c |   62 +++++++++++++++++++++--------------------
 1 file changed, 32 insertions(+), 30 deletions(-)

--- a/drivers/staging/greybus/uart.c
+++ b/drivers/staging/greybus/uart.c
@@ -789,6 +789,17 @@ out:
 	gbphy_runtime_put_autosuspend(gb_tty->gbphy_dev);
 }
 
+static void gb_tty_port_destruct(struct tty_port *port)
+{
+	struct gb_tty *gb_tty = container_of(port, struct gb_tty, port);
+
+	if (gb_tty->minor != GB_NUM_MINORS)
+		release_minor(gb_tty);
+	kfifo_free(&gb_tty->write_fifo);
+	kfree(gb_tty->buffer);
+	kfree(gb_tty);
+}
+
 static const struct tty_operations gb_ops = {
 	.install =		gb_tty_install,
 	.open =			gb_tty_open,
@@ -814,6 +825,7 @@ static const struct tty_port_operations
 	.dtr_rts =		gb_tty_dtr_rts,
 	.activate =		gb_tty_port_activate,
 	.shutdown =		gb_tty_port_shutdown,
+	.destruct =		gb_tty_port_destruct,
 };
 
 static int gb_uart_probe(struct gbphy_device *gbphy_dev,
@@ -826,17 +838,11 @@ static int gb_uart_probe(struct gbphy_de
 	int retval;
 	int minor;
 
-	gb_tty = kzalloc(sizeof(*gb_tty), GFP_KERNEL);
-	if (!gb_tty)
-		return -ENOMEM;
-
 	connection = gb_connection_create(gbphy_dev->bundle,
 					  le16_to_cpu(gbphy_dev->cport_desc->id),
 					  gb_uart_request_handler);
-	if (IS_ERR(connection)) {
-		retval = PTR_ERR(connection);
-		goto exit_tty_free;
-	}
+	if (IS_ERR(connection))
+		return PTR_ERR(connection);
 
 	max_payload = gb_operation_get_payload_size_max(connection);
 	if (max_payload < sizeof(struct gb_uart_send_data_request)) {
@@ -844,13 +850,23 @@ static int gb_uart_probe(struct gbphy_de
 		goto exit_connection_destroy;
 	}
 
+	gb_tty = kzalloc(sizeof(*gb_tty), GFP_KERNEL);
+	if (!gb_tty) {
+		retval = -ENOMEM;
+		goto exit_connection_destroy;
+	}
+
+	tty_port_init(&gb_tty->port);
+	gb_tty->port.ops = &gb_port_ops;
+	gb_tty->minor = GB_NUM_MINORS;
+
 	gb_tty->buffer_payload_max = max_payload -
 			sizeof(struct gb_uart_send_data_request);
 
 	gb_tty->buffer = kzalloc(gb_tty->buffer_payload_max, GFP_KERNEL);
 	if (!gb_tty->buffer) {
 		retval = -ENOMEM;
-		goto exit_connection_destroy;
+		goto exit_put_port;
 	}
 
 	INIT_WORK(&gb_tty->tx_work, gb_uart_tx_write_work);
@@ -858,7 +874,7 @@ static int gb_uart_probe(struct gbphy_de
 	retval = kfifo_alloc(&gb_tty->write_fifo, GB_UART_WRITE_FIFO_SIZE,
 			     GFP_KERNEL);
 	if (retval)
-		goto exit_buf_free;
+		goto exit_put_port;
 
 	gb_tty->credits = GB_UART_FIRMWARE_CREDITS;
 	init_completion(&gb_tty->credits_complete);
@@ -872,7 +888,7 @@ static int gb_uart_probe(struct gbphy_de
 		} else {
 			retval = minor;
 		}
-		goto exit_kfifo_free;
+		goto exit_put_port;
 	}
 
 	gb_tty->minor = minor;
@@ -881,9 +897,6 @@ static int gb_uart_probe(struct gbphy_de
 	init_waitqueue_head(&gb_tty->wioctl);
 	mutex_init(&gb_tty->mutex);
 
-	tty_port_init(&gb_tty->port);
-	gb_tty->port.ops = &gb_port_ops;
-
 	gb_tty->connection = connection;
 	gb_tty->gbphy_dev = gbphy_dev;
 	gb_connection_set_data(connection, gb_tty);
@@ -891,7 +904,7 @@ static int gb_uart_probe(struct gbphy_de
 
 	retval = gb_connection_enable_tx(connection);
 	if (retval)
-		goto exit_release_minor;
+		goto exit_put_port;
 
 	send_control(gb_tty, gb_tty->ctrlout);
 
@@ -918,16 +931,10 @@ static int gb_uart_probe(struct gbphy_de
 
 exit_connection_disable:
 	gb_connection_disable(connection);
-exit_release_minor:
-	release_minor(gb_tty);
-exit_kfifo_free:
-	kfifo_free(&gb_tty->write_fifo);
-exit_buf_free:
-	kfree(gb_tty->buffer);
+exit_put_port:
+	tty_port_put(&gb_tty->port);
 exit_connection_destroy:
 	gb_connection_destroy(connection);
-exit_tty_free:
-	kfree(gb_tty);
 
 	return retval;
 }
@@ -958,15 +965,10 @@ static void gb_uart_remove(struct gbphy_
 	gb_connection_disable_rx(connection);
 	tty_unregister_device(gb_tty_driver, gb_tty->minor);
 
-	/* FIXME - free transmit / receive buffers */
-
 	gb_connection_disable(connection);
-	tty_port_destroy(&gb_tty->port);
 	gb_connection_destroy(connection);
-	release_minor(gb_tty);
-	kfifo_free(&gb_tty->write_fifo);
-	kfree(gb_tty->buffer);
-	kfree(gb_tty);
+
+	tty_port_put(&gb_tty->port);
 }
 
 static int gb_tty_init(void)

[PATCH 5.4 13/68] Re-enable UAS for LaCie Rugged USB3-FW with fk quirk

[Greg Kroah-Hartman]

From: Julian Sikorski <belegdol@gmail.com>

commit ce1c42b4dacfe7d71c852d8bf3371067ccba865c upstream.

Further testing has revealed that LaCie Rugged USB3-FW does work with
uas as long as US_FL_NO_REPORT_OPCODES and US_FL_NO_SAME are enabled.

Link: https://lore.kernel.org/linux-usb/2167ea48-e273-a336-a4e0-10a4e883e75e@redhat.com/
Cc: stable <stable@vger.kernel.org>
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Julian Sikorski <belegdol+github@gmail.com>
Link: https://lore.kernel.org/r/20210913181454.7365-1-belegdol+github@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/storage/unusual_uas.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -50,7 +50,7 @@ UNUSUAL_DEV(0x059f, 0x1061, 0x0000, 0x99
 		"LaCie",
 		"Rugged USB3-FW",
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
-		US_FL_IGNORE_UAS),
+		US_FL_NO_REPORT_OPCODES | US_FL_NO_SAME),
 
 /*
  * Apricorn USB3 dongle sometimes returns "USBSUSBSUSBS" in response to SCSI

[PATCH 5.4 14/68] usb: core: hcd: Add support for deferring roothub registration

[Greg Kroah-Hartman]

From: Kishon Vijay Abraham I <kishon@ti.com>

commit 58877b0824da15698bd85a0a9dbfa8c354e6ecb7 upstream.

It has been observed with certain PCIe USB cards (like Inateck connected
to AM64 EVM or J7200 EVM) that as soon as the primary roothub is
registered, port status change is handled even before xHC is running
leading to cold plug USB devices not detected. For such cases, registering
both the root hubs along with the second HCD is required. Add support for
deferring roothub registration in usb_add_hcd(), so that both primary and
secondary roothubs are registered along with the second HCD.

CC: stable@vger.kernel.org # 5.4+
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Tested-by: Chris Chiu <chris.chiu@canonical.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20210909064200.16216-2-kishon@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/core/hcd.c  |   29 +++++++++++++++++++++++------
 include/linux/usb/hcd.h |    2 ++
 2 files changed, 25 insertions(+), 6 deletions(-)

--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2636,6 +2636,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
 {
 	int retval;
 	struct usb_device *rhdev;
+	struct usb_hcd *shared_hcd;
 
 	if (!hcd->skip_phy_initialization && usb_hcd_is_primary_hcd(hcd)) {
 		hcd->phy_roothub = usb_phy_roothub_alloc(hcd->self.sysdev);
@@ -2792,13 +2793,26 @@ int usb_add_hcd(struct usb_hcd *hcd,
 		goto err_hcd_driver_start;
 	}
 
+	/* starting here, usbcore will pay attention to the shared HCD roothub */
+	shared_hcd = hcd->shared_hcd;
+	if (!usb_hcd_is_primary_hcd(hcd) && shared_hcd && HCD_DEFER_RH_REGISTER(shared_hcd)) {
+		retval = register_root_hub(shared_hcd);
+		if (retval != 0)
+			goto err_register_root_hub;
+
+		if (shared_hcd->uses_new_polling && HCD_POLL_RH(shared_hcd))
+			usb_hcd_poll_rh_status(shared_hcd);
+	}
+
 	/* starting here, usbcore will pay attention to this root hub */
-	retval = register_root_hub(hcd);
-	if (retval != 0)
-		goto err_register_root_hub;
+	if (!HCD_DEFER_RH_REGISTER(hcd)) {
+		retval = register_root_hub(hcd);
+		if (retval != 0)
+			goto err_register_root_hub;
 
-	if (hcd->uses_new_polling && HCD_POLL_RH(hcd))
-		usb_hcd_poll_rh_status(hcd);
+		if (hcd->uses_new_polling && HCD_POLL_RH(hcd))
+			usb_hcd_poll_rh_status(hcd);
+	}
 
 	return retval;
 
@@ -2841,6 +2855,7 @@ EXPORT_SYMBOL_GPL(usb_add_hcd);
 void usb_remove_hcd(struct usb_hcd *hcd)
 {
 	struct usb_device *rhdev = hcd->self.root_hub;
+	bool rh_registered;
 
 	dev_info(hcd->self.controller, "remove, state %x\n", hcd->state);
 
@@ -2851,6 +2866,7 @@ void usb_remove_hcd(struct usb_hcd *hcd)
 
 	dev_dbg(hcd->self.controller, "roothub graceful disconnect\n");
 	spin_lock_irq (&hcd_root_hub_lock);
+	rh_registered = hcd->rh_registered;
 	hcd->rh_registered = 0;
 	spin_unlock_irq (&hcd_root_hub_lock);
 
@@ -2860,7 +2876,8 @@ void usb_remove_hcd(struct usb_hcd *hcd)
 	cancel_work_sync(&hcd->died_work);
 
 	mutex_lock(&usb_bus_idr_lock);
-	usb_disconnect(&rhdev);		/* Sets rhdev to NULL */
+	if (rh_registered)
+		usb_disconnect(&rhdev);		/* Sets rhdev to NULL */
 	mutex_unlock(&usb_bus_idr_lock);
 
 	/*
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -124,6 +124,7 @@ struct usb_hcd {
 #define HCD_FLAG_RH_RUNNING		5	/* root hub is running? */
 #define HCD_FLAG_DEAD			6	/* controller has died? */
 #define HCD_FLAG_INTF_AUTHORIZED	7	/* authorize interfaces? */
+#define HCD_FLAG_DEFER_RH_REGISTER	8	/* Defer roothub registration */
 
 	/* The flags can be tested using these macros; they are likely to
 	 * be slightly faster than test_bit().
@@ -134,6 +135,7 @@ struct usb_hcd {
 #define HCD_WAKEUP_PENDING(hcd)	((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING))
 #define HCD_RH_RUNNING(hcd)	((hcd)->flags & (1U << HCD_FLAG_RH_RUNNING))
 #define HCD_DEAD(hcd)		((hcd)->flags & (1U << HCD_FLAG_DEAD))
+#define HCD_DEFER_RH_REGISTER(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEFER_RH_REGISTER))
 
 	/*
 	 * Specifies if interfaces are authorized by default

[PATCH 5.4 15/68] USB: serial: mos7840: remove duplicated 0xac24 device ID

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

commit 211f323768a25b30c106fd38f15a0f62c7c2b5f4 upstream.

0xac24 device ID is already defined and used via
BANDB_DEVICE_ID_USO9ML2_4.  Remove the duplicate from the list.

Fixes: 27f1281d5f72 ("USB: serial: Extra device/vendor ID for mos7840 driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/mos7840.c |    2 --
 1 file changed, 2 deletions(-)

--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -114,7 +114,6 @@
 #define BANDB_DEVICE_ID_USOPTL4_2P       0xBC02
 #define BANDB_DEVICE_ID_USOPTL4_4        0xAC44
 #define BANDB_DEVICE_ID_USOPTL4_4P       0xBC03
-#define BANDB_DEVICE_ID_USOPTL2_4        0xAC24
 
 /* This driver also supports
  * ATEN UC2324 device using Moschip MCS7840
@@ -196,7 +195,6 @@ static const struct usb_device_id id_tab
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2P)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4P)},
-	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
 	{USB_DEVICE(USB_VENDOR_ID_MOXA, MOXA_DEVICE_ID_2210)},

[PATCH 5.4 16/68] USB: serial: option: add Telit LN920 compositions

[Greg Kroah-Hartman]

From: Carlo Lobrano <c.lobrano@gmail.com>

commit 7bb057134d609b9c038a00b6876cf0d37d0118ce upstream.

This patch adds the following Telit LN920 compositions:

0x1060: tty, adb, rmnet, tty, tty, tty, tty
0x1061: tty, adb, mbim, tty, tty, tty, tty
0x1062: rndis, tty, adb, tty, tty, tty, tty
0x1063: tty, adb, ecm, tty, tty, tty, tty

Signed-off-by: Carlo Lobrano <c.lobrano@gmail.com>
Link: https://lore.kernel.org/r/20210903123913.1086513-1-c.lobrano@gmail.com
Reviewed-by: Daniele Palmas <dnlplm@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1205,6 +1205,14 @@ static const struct usb_device_id option
 	  .driver_info = NCTRL(0) | RSVD(1) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1056, 0xff),	/* Telit FD980 */
 	  .driver_info = NCTRL(2) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1060, 0xff),	/* Telit LN920 (rmnet) */
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1061, 0xff),	/* Telit LN920 (MBIM) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1062, 0xff),	/* Telit LN920 (RNDIS) */
+	  .driver_info = NCTRL(2) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1063, 0xff),	/* Telit LN920 (ECM) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),

[PATCH 5.4 17/68] USB: serial: option: remove duplicate USB device ID

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

commit 1ca200a8c6f079950a04ea3c3380fe8cf78e95a2 upstream.

The device ZTE 0x0094 is already on the list.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Fixes: b9e44fe5ecda ("USB: option: cleanup zte 3g-dongle's pid in option.c")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1658,7 +1658,6 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0060, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff),
 	  .driver_info = RSVD(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff),

[PATCH 5.4 18/68] USB: serial: option: add device id for Foxconn T99W265

[Greg Kroah-Hartman]

From: Slark Xiao <slark_xiao@163.com>

commit 9e3eed534f8235a4a596a9dae5b8a6425d81ea1a upstream.

Adding support for Foxconn device T99W265 for enumeration with
PID 0xe0db.

usb-devices output for 0xe0db
T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 19 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=0489 ProdID=e0db Rev=05.04
S:  Manufacturer=Microsoft
S:  Product=Generic Mobile Broadband Adapter
S:  SerialNumber=6c50f452
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

if0/1: MBIM, if2:Diag, if3:GNSS, if4: Modem

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20210917110106.9852-1-slark_xiao@163.com
[ johan: use USB_DEVICE_INTERFACE_CLASS(), amend comment ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2075,6 +2075,8 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
 	{ USB_DEVICE(0x0489, 0xe0b5),						/* Foxconn T77W968 ESIM */
 	  .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0db, 0xff),			/* Foxconn T99W265 MBIM */
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE(0x1508, 0x1001),						/* Fibocom NL668 (IOT version) */
 	  .driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
 	{ USB_DEVICE(0x2cb7, 0x0104),						/* Fibocom NL678 series */

[PATCH 5.4 19/68] mcb: fix error handling in mcb_alloc_bus()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 25a1433216489de4abc889910f744e952cb6dbae upstream.

There are two bugs:
1) If ida_simple_get() fails then this code calls put_device(carrier)
   but we haven't yet called get_device(carrier) and probably that
   leads to a use after free.
2) After device_initialize() then we need to use put_device() to
   release the bus.  This will free the internal resources tied to the
   device and call mcb_free_bus() which will free the rest.

Fixes: 5d9e2ab9fea4 ("mcb: Implement bus->dev.release callback")
Fixes: 18d288198099 ("mcb: Correctly initialize the bus's device")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/32e160cf6864ce77f9d62948338e24db9fd8ead9.1630931319.git.johannes.thumshirn@wdc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mcb/mcb-core.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/drivers/mcb/mcb-core.c
+++ b/drivers/mcb/mcb-core.c
@@ -277,8 +277,8 @@ struct mcb_bus *mcb_alloc_bus(struct dev
 
 	bus_nr = ida_simple_get(&mcb_ida, 0, 0, GFP_KERNEL);
 	if (bus_nr < 0) {
-		rc = bus_nr;
-		goto err_free;
+		kfree(bus);
+		return ERR_PTR(bus_nr);
 	}
 
 	bus->bus_nr = bus_nr;
@@ -293,12 +293,12 @@ struct mcb_bus *mcb_alloc_bus(struct dev
 	dev_set_name(&bus->dev, "mcb:%d", bus_nr);
 	rc = device_add(&bus->dev);
 	if (rc)
-		goto err_free;
+		goto err_put;
 
 	return bus;
-err_free:
-	put_device(carrier);
-	kfree(bus);
+
+err_put:
+	put_device(&bus->dev);
 	return ERR_PTR(rc);
 }
 EXPORT_SYMBOL_GPL(mcb_alloc_bus);

[PATCH 5.4 20/68] erofs: fix up erofs_lookup tracepoint

[Greg Kroah-Hartman]

From: Gao Xiang <hsiangkao@linux.alibaba.com>

commit 93368aab0efc87288cac65e99c9ed2e0ffc9e7d0 upstream.

Fix up a misuse that the filename pointer isn't always valid in
the ring buffer, and we should copy the content instead.

Link: https://lore.kernel.org/r/20210921143531.81356-1-hsiangkao@linux.alibaba.com
Fixes: 13f06f48f7bf ("staging: erofs: support tracepoint")
Cc: stable@vger.kernel.org # 4.19+
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/trace/events/erofs.h |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/include/trace/events/erofs.h
+++ b/include/trace/events/erofs.h
@@ -35,20 +35,20 @@ TRACE_EVENT(erofs_lookup,
 	TP_STRUCT__entry(
 		__field(dev_t,		dev	)
 		__field(erofs_nid_t,	nid	)
-		__field(const char *,	name	)
+		__string(name,		dentry->d_name.name	)
 		__field(unsigned int,	flags	)
 	),
 
 	TP_fast_assign(
 		__entry->dev	= dir->i_sb->s_dev;
 		__entry->nid	= EROFS_I(dir)->nid;
-		__entry->name	= dentry->d_name.name;
+		__assign_str(name, dentry->d_name.name);
 		__entry->flags	= flags;
 	),
 
 	TP_printk("dev = (%d,%d), pnid = %llu, name:%s, flags:%x",
 		show_dev_nid(__entry),
-		__entry->name,
+		__get_str(name),
 		__entry->flags)
 );
 

[PATCH 5.4 21/68] btrfs: prevent __btrfs_dump_space_info() to underflow its free space

[Greg Kroah-Hartman]

From: Qu Wenruo <wqu@suse.com>

commit 0619b7901473c380abc05d45cf9c70bee0707db3 upstream.

It's not uncommon where __btrfs_dump_space_info() gets called
under over-commit situations.

In that case free space would underflow as total allocated space is not
enough to handle all the over-committed space.

Such underflow values can sometimes cause confusion for users enabled
enospc_debug mount option, and takes some seconds for developers to
convert the underflow value to signed result.

Just output the free space as s64 to avoid such problem.

Reported-by: Eli V <eliventer@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAJtFHUSy4zgyhf-4d9T+KdJp9w=UgzC2A0V=VtmaeEpcGgm1-Q@mail.gmail.com/
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/space-info.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/fs/btrfs/space-info.c
+++ b/fs/btrfs/space-info.c
@@ -262,9 +262,10 @@ static void __btrfs_dump_space_info(stru
 {
 	lockdep_assert_held(&info->lock);
 
-	btrfs_info(fs_info, "space_info %llu has %llu free, is %sfull",
+	/* The free space could be negative in case of overcommit */
+	btrfs_info(fs_info, "space_info %llu has %lld free, is %sfull",
 		   info->flags,
-		   info->total_bytes - btrfs_space_info_used(info, true),
+		   (s64)(info->total_bytes - btrfs_space_info_used(info, true)),
 		   info->full ? "" : "not ");
 	btrfs_info(fs_info,
 		"space_info total=%llu, used=%llu, pinned=%llu, reserved=%llu, may_use=%llu, readonly=%llu",

[PATCH 5.4 22/68] xhci: Set HCD flag to defer primary roothub registration

[Greg Kroah-Hartman]

From: Kishon Vijay Abraham I <kishon@ti.com>

commit b7a0a792f864583207c593b50fd1b752ed89f4c1 upstream.

Set "HCD_FLAG_DEFER_RH_REGISTER" to hcd->flags in xhci_run() to defer
registering primary roothub in usb_add_hcd(). This will make sure both
primary roothub and secondary roothub will be registered along with the
second HCD. This is required for cold plugged USB devices to be detected
in certain PCIe USB cards (like Inateck USB card connected to AM64 EVM
or J7200 EVM).

CC: stable@vger.kernel.org # 5.4+
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Tested-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20210909064200.16216-3-kishon@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -693,6 +693,7 @@ int xhci_run(struct usb_hcd *hcd)
 		if (ret)
 			xhci_free_command(xhci, command);
 	}
+	set_bit(HCD_FLAG_DEFER_RH_REGISTER, &hcd->flags);
 	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
 			"Finished xhci_run for USB2 roothub");
 

[PATCH 5.4 23/68] serial: mvebu-uart: fix drivers tx_empty callback

[Greg Kroah-Hartman]

From: Pali Rohár <pali@kernel.org>

commit 74e1eb3b4a1ef2e564b4bdeb6e92afe844e900de upstream.

Driver's tx_empty callback should signal when the transmit shift register
is empty. So when the last character has been sent.

STAT_TX_FIFO_EMP bit signals only that HW transmit FIFO is empty, which
happens when the last byte is loaded into transmit shift register.

STAT_TX_EMP bit signals when the both HW transmit FIFO and transmit shift
register are empty.

So replace STAT_TX_FIFO_EMP check by STAT_TX_EMP in mvebu_uart_tx_empty()
callback function.

Fixes: 30530791a7a0 ("serial: mvebu-uart: initial support for Armada-3700 serial port")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20210911132017.25505-1-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/mvebu-uart.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/mvebu-uart.c
+++ b/drivers/tty/serial/mvebu-uart.c
@@ -164,7 +164,7 @@ static unsigned int mvebu_uart_tx_empty(
 	st = readl(port->membase + UART_STAT);
 	spin_unlock_irqrestore(&port->lock, flags);
 
-	return (st & STAT_TX_FIFO_EMP) ? TIOCSER_TEMT : 0;
+	return (st & STAT_TX_EMP) ? TIOCSER_TEMT : 0;
 }
 
 static unsigned int mvebu_uart_get_mctrl(struct uart_port *port)

[PATCH 5.4 24/68] net: hso: fix muxed tty registration

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit e8f69b16ee776da88589b5271e3f46020efc8f6c upstream.

If resource allocation and registration fail for a muxed tty device
(e.g. if there are no more minor numbers) the driver should not try to
deregister the never-registered (or already-deregistered) tty.

Fix up the error handling to avoid dereferencing a NULL pointer when
attempting to remove the character device.

Fixes: 72dc1c096c70 ("HSO: add option hso driver")
Cc: stable@vger.kernel.org	# 2.6.27
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/hso.c |   12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -2704,14 +2704,14 @@ struct hso_device *hso_create_mux_serial
 
 	serial = kzalloc(sizeof(*serial), GFP_KERNEL);
 	if (!serial)
-		goto exit;
+		goto err_free_dev;
 
 	hso_dev->port_data.dev_serial = serial;
 	serial->parent = hso_dev;
 
 	if (hso_serial_common_create
 	    (serial, 1, CTRL_URB_RX_SIZE, CTRL_URB_TX_SIZE))
-		goto exit;
+		goto err_free_serial;
 
 	serial->tx_data_length--;
 	serial->write_data = hso_mux_serial_write_data;
@@ -2727,11 +2727,9 @@ struct hso_device *hso_create_mux_serial
 	/* done, return it */
 	return hso_dev;
 
-exit:
-	if (serial) {
-		tty_unregister_device(tty_drv, serial->minor);
-		kfree(serial);
-	}
+err_free_serial:
+	kfree(serial);
+err_free_dev:
 	kfree(hso_dev);
 	return NULL;
 

[PATCH 5.4 25/68] afs: Fix incorrect triggering of sillyrename on 3rd-party invalidation

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 63d49d843ef5fffeea069e0ffdfbd2bf40ba01c6 ]

The AFS filesystem is currently triggering the silly-rename cleanup from
afs_d_revalidate() when it sees that a dentry has been changed by a third
party[1].  It should not be doing this as the cleanup includes deleting the
silly-rename target file on iput.

Fix this by removing the places in the d_revalidate handling that validate
anything other than the directory and the dirent.  It probably should not
be looking to validate the target inode of the dentry also.

This includes removing the point in afs_d_revalidate() where the inode that
a dentry used to point to was marked as being deleted (AFS_VNODE_DELETED).
We don't know it got deleted.  It could have been renamed or it could have
hard links remaining.

This was reproduced by cloning a git repo onto an afs volume on one
machine, switching to another machine and doing "git status", then
switching back to the first and doing "git status".  The second status
would show weird output due to ".git/index" getting deleted by the above
mentioned mechanism.

A simpler way to do it is to do:

	machine 1: touch a
	machine 2: touch b; mv -f b a
	machine 1: stat a

on an afs volume.  The bug shows up as the stat failing with ENOENT and the
file server log showing that machine 1 deleted "a".

Fixes: 79ddbfa500b3 ("afs: Implement sillyrename for unlink and rename")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: linux-afs@lists.infradead.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214217#c4 [1]
Link: https://lore.kernel.org/r/163111668100.283156.3851669884664475428.stgit@warthog.procyon.org.uk/
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/afs/dir.c | 46 +++++++---------------------------------------
 1 file changed, 7 insertions(+), 39 deletions(-)

diff --git a/fs/afs/dir.c b/fs/afs/dir.c
index e7494cd49ce7..8c39533d122a 100644
--- a/fs/afs/dir.c
+++ b/fs/afs/dir.c
@@ -977,9 +977,9 @@ static struct dentry *afs_lookup(struct inode *dir, struct dentry *dentry,
  */
 static int afs_d_revalidate_rcu(struct dentry *dentry)
 {
-	struct afs_vnode *dvnode, *vnode;
+	struct afs_vnode *dvnode;
 	struct dentry *parent;
-	struct inode *dir, *inode;
+	struct inode *dir;
 	long dir_version, de_version;
 
 	_enter("%p", dentry);
@@ -1009,18 +1009,6 @@ static int afs_d_revalidate_rcu(struct dentry *dentry)
 			return -ECHILD;
 	}
 
-	/* Check to see if the vnode referred to by the dentry still
-	 * has a callback.
-	 */
-	if (d_really_is_positive(dentry)) {
-		inode = d_inode_rcu(dentry);
-		if (inode) {
-			vnode = AFS_FS_I(inode);
-			if (!afs_check_validity(vnode))
-				return -ECHILD;
-		}
-	}
-
 	return 1; /* Still valid */
 }
 
@@ -1056,17 +1044,7 @@ static int afs_d_revalidate(struct dentry *dentry, unsigned int flags)
 	if (IS_ERR(key))
 		key = NULL;
 
-	if (d_really_is_positive(dentry)) {
-		inode = d_inode(dentry);
-		if (inode) {
-			vnode = AFS_FS_I(inode);
-			afs_validate(vnode, key);
-			if (test_bit(AFS_VNODE_DELETED, &vnode->flags))
-				goto out_bad;
-		}
-	}
-
-	/* lock down the parent dentry so we can peer at it */
+	/* Hold the parent dentry so we can peer at it */
 	parent = dget_parent(dentry);
 	dir = AFS_FS_I(d_inode(parent));
 
@@ -1075,7 +1053,7 @@ static int afs_d_revalidate(struct dentry *dentry, unsigned int flags)
 
 	if (test_bit(AFS_VNODE_DELETED, &dir->flags)) {
 		_debug("%pd: parent dir deleted", dentry);
-		goto out_bad_parent;
+		goto not_found;
 	}
 
 	/* We only need to invalidate a dentry if the server's copy changed
@@ -1101,12 +1079,12 @@ static int afs_d_revalidate(struct dentry *dentry, unsigned int flags)
 	case 0:
 		/* the filename maps to something */
 		if (d_really_is_negative(dentry))
-			goto out_bad_parent;
+			goto not_found;
 		inode = d_inode(dentry);
 		if (is_bad_inode(inode)) {
 			printk("kAFS: afs_d_revalidate: %pd2 has bad inode\n",
 			       dentry);
-			goto out_bad_parent;
+			goto not_found;
 		}
 
 		vnode = AFS_FS_I(inode);
@@ -1128,9 +1106,6 @@ static int afs_d_revalidate(struct dentry *dentry, unsigned int flags)
 			       dentry, fid.unique,
 			       vnode->fid.unique,
 			       vnode->vfs_inode.i_generation);
-			write_seqlock(&vnode->cb_lock);
-			set_bit(AFS_VNODE_DELETED, &vnode->flags);
-			write_sequnlock(&vnode->cb_lock);
 			goto not_found;
 		}
 		goto out_valid;
@@ -1145,7 +1120,7 @@ static int afs_d_revalidate(struct dentry *dentry, unsigned int flags)
 	default:
 		_debug("failed to iterate dir %pd: %d",
 		       parent, ret);
-		goto out_bad_parent;
+		goto not_found;
 	}
 
 out_valid:
@@ -1156,16 +1131,9 @@ static int afs_d_revalidate(struct dentry *dentry, unsigned int flags)
 	_leave(" = 1 [valid]");
 	return 1;
 
-	/* the dirent, if it exists, now points to a different vnode */
 not_found:
-	spin_lock(&dentry->d_lock);
-	dentry->d_flags |= DCACHE_NFSFS_RENAMED;
-	spin_unlock(&dentry->d_lock);
-
-out_bad_parent:
 	_debug("dropping dentry %pd2", dentry);
 	dput(parent);
-out_bad:
 	key_put(key);
 
 	_leave(" = 0 [bad]");
-- 
2.33.0

[PATCH 5.4 26/68] platform/x86/intel: punit_ipc: Drop wrong use of ACPI_PTR()

[Greg Kroah-Hartman]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 349bff48ae0f5f8aa2075d0bdc2091a30bd634f6 ]

ACPI_PTR() is more harmful than helpful. For example, in this case
if CONFIG_ACPI=n, the ID table left unused which is not what we want.

Instead of adding ifdeffery here and there, drop ACPI_PTR()
and unused acpi.h.

Fixes: fdca4f16f57d ("platform:x86: add Intel P-Unit mailbox IPC driver")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210827145310.76239-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel_punit_ipc.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/platform/x86/intel_punit_ipc.c b/drivers/platform/x86/intel_punit_ipc.c
index ccb44f2eb240..af3a28623e86 100644
--- a/drivers/platform/x86/intel_punit_ipc.c
+++ b/drivers/platform/x86/intel_punit_ipc.c
@@ -8,7 +8,6 @@
  * which provide mailbox interface for power management usage.
  */
 
-#include <linux/acpi.h>
 #include <linux/bitops.h>
 #include <linux/delay.h>
 #include <linux/device.h>
@@ -335,7 +334,7 @@ static struct platform_driver intel_punit_ipc_driver = {
 	.remove = intel_punit_ipc_remove,
 	.driver = {
 		.name = "intel_punit_ipc",
-		.acpi_match_table = ACPI_PTR(punit_ipc_acpi_ids),
+		.acpi_match_table = punit_ipc_acpi_ids,
 	},
 };
 
-- 
2.33.0

[PATCH 5.4 27/68] enetc: Fix illegal access when reading affinity_hint

[Greg Kroah-Hartman]

From: Claudiu Manoil <claudiu.manoil@nxp.com>

[ Upstream commit 7237a494decfa17d0b9d0076e6cee3235719de90 ]

irq_set_affinity_hit() stores a reference to the cpumask_t
parameter in the irq descriptor, and that reference can be
accessed later from irq_affinity_hint_proc_show(). Since
the cpu_mask parameter passed to irq_set_affinity_hit() has
only temporary storage (it's on the stack memory), later
accesses to it are illegal. Thus reads from the corresponding
procfs affinity_hint file can result in paging request oops.

The issue is fixed by the get_cpu_mask() helper, which provides
a permanent storage for the cpumask_t parameter.

Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/enetc/enetc.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c
index b77eaf31bd4e..cee77326e7e8 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc.c
@@ -1222,7 +1222,6 @@ static void enetc_clear_bdrs(struct enetc_ndev_priv *priv)
 static int enetc_setup_irqs(struct enetc_ndev_priv *priv)
 {
 	struct pci_dev *pdev = priv->si->pdev;
-	cpumask_t cpu_mask;
 	int i, j, err;
 
 	for (i = 0; i < priv->bdr_int_num; i++) {
@@ -1249,9 +1248,7 @@ static int enetc_setup_irqs(struct enetc_ndev_priv *priv)
 
 			enetc_wr(hw, ENETC_SIMSITRV(idx), entry);
 		}
-		cpumask_clear(&cpu_mask);
-		cpumask_set_cpu(i % num_online_cpus(), &cpu_mask);
-		irq_set_affinity_hint(irq, &cpu_mask);
+		irq_set_affinity_hint(irq, get_cpu_mask(i % num_online_cpus()));
 	}
 
 	return 0;
-- 
2.33.0

[PATCH 5.4 28/68] bnxt_en: Fix TX timeout when TX ring size is set to the smallest

[Greg Kroah-Hartman]

From: Michael Chan <michael.chan@broadcom.com>

[ Upstream commit 5bed8b0704c9ecccc8f4a2c377d7c8e21090a82e ]

The smallest TX ring size we support must fit a TX SKB with MAX_SKB_FRAGS
+ 1.  Because the first TX BD for a packet is always a long TX BD, we
need an extra TX BD to fit this packet.  Define BNXT_MIN_TX_DESC_CNT with
this value to make this more clear.  The current code uses a minimum
that is off by 1.  Fix it using this constant.

The tx_wake_thresh to determine when to wake up the TX queue is half the
ring size but we must have at least BNXT_MIN_TX_DESC_CNT for the next
packet which may have maximum fragments.  So the comparison of the
available TX BDs with tx_wake_thresh should be >= instead of > in the
current code.  Otherwise, at the smallest ring size, we will never wake
up the TX queue and will cause TX timeout.

Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadocm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c         | 8 ++++----
 drivers/net/ethernet/broadcom/bnxt/bnxt.h         | 5 +++++
 drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 2 +-
 3 files changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index e67f07faca78..7f590a9e3af7 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -372,7 +372,7 @@ static bool bnxt_txr_netif_try_stop_queue(struct bnxt *bp,
 	 * netif_tx_queue_stopped().
 	 */
 	smp_mb();
-	if (bnxt_tx_avail(bp, txr) > bp->tx_wake_thresh) {
+	if (bnxt_tx_avail(bp, txr) >= bp->tx_wake_thresh) {
 		netif_tx_wake_queue(txq);
 		return false;
 	}
@@ -701,7 +701,7 @@ static void bnxt_tx_int(struct bnxt *bp, struct bnxt_napi *bnapi, int nr_pkts)
 	smp_mb();
 
 	if (unlikely(netif_tx_queue_stopped(txq)) &&
-	    bnxt_tx_avail(bp, txr) > bp->tx_wake_thresh &&
+	    bnxt_tx_avail(bp, txr) >= bp->tx_wake_thresh &&
 	    READ_ONCE(txr->dev_state) != BNXT_DEV_STATE_CLOSING)
 		netif_tx_wake_queue(txq);
 }
@@ -2206,7 +2206,7 @@ static int __bnxt_poll_work(struct bnxt *bp, struct bnxt_cp_ring_info *cpr,
 		if (TX_CMP_TYPE(txcmp) == CMP_TYPE_TX_L2_CMP) {
 			tx_pkts++;
 			/* return full budget so NAPI will complete. */
-			if (unlikely(tx_pkts > bp->tx_wake_thresh)) {
+			if (unlikely(tx_pkts >= bp->tx_wake_thresh)) {
 				rx_pkts = budget;
 				raw_cons = NEXT_RAW_CMP(raw_cons);
 				if (budget)
@@ -3329,7 +3329,7 @@ static int bnxt_init_tx_rings(struct bnxt *bp)
 	u16 i;
 
 	bp->tx_wake_thresh = max_t(int, bp->tx_ring_size / 2,
-				   MAX_SKB_FRAGS + 1);
+				   BNXT_MIN_TX_DESC_CNT);
 
 	for (i = 0; i < bp->tx_nr_rings; i++) {
 		struct bnxt_tx_ring_info *txr = &bp->tx_ring[i];
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index 510ff01bdad8..8ba369c0100b 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -601,6 +601,11 @@ struct nqe_cn {
 #define BNXT_MAX_RX_JUM_DESC_CNT	(RX_DESC_CNT * MAX_RX_AGG_PAGES - 1)
 #define BNXT_MAX_TX_DESC_CNT		(TX_DESC_CNT * MAX_TX_PAGES - 1)
 
+/* Minimum TX BDs for a TX packet with MAX_SKB_FRAGS + 1.  We need one extra
+ * BD because the first TX BD is always a long BD.
+ */
+#define BNXT_MIN_TX_DESC_CNT		(MAX_SKB_FRAGS + 2)
+
 #define RX_RING(x)	(((x) & ~(RX_DESC_CNT - 1)) >> (BNXT_PAGE_SHIFT - 4))
 #define RX_IDX(x)	((x) & (RX_DESC_CNT - 1))
 
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index 211852378224..97aff84fd1d1 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -744,7 +744,7 @@ static int bnxt_set_ringparam(struct net_device *dev,
 
 	if ((ering->rx_pending > BNXT_MAX_RX_DESC_CNT) ||
 	    (ering->tx_pending > BNXT_MAX_TX_DESC_CNT) ||
-	    (ering->tx_pending <= MAX_SKB_FRAGS))
+	    (ering->tx_pending < BNXT_MIN_TX_DESC_CNT))
 		return -EINVAL;
 
 	if (netif_running(dev))
-- 
2.33.0

[PATCH 5.4 29/68] net/smc: add missing error check in smc_clc_prfx_set()

[Greg Kroah-Hartman]

From: Karsten Graul <kgraul@linux.ibm.com>

[ Upstream commit 6c90731980655280ea07ce4b21eb97457bf86286 ]

Coverity stumbled over a missing error check in smc_clc_prfx_set():

*** CID 1475954:  Error handling issues  (CHECKED_RETURN)
/net/smc/smc_clc.c: 233 in smc_clc_prfx_set()
>>>     CID 1475954:  Error handling issues  (CHECKED_RETURN)
>>>     Calling "kernel_getsockname" without checking return value (as is done elsewhere 8 out of 10 times).
233     	kernel_getsockname(clcsock, (struct sockaddr *)&addrs);

Add the return code check in smc_clc_prfx_set().

Fixes: c246d942eabc ("net/smc: restructure netinfo for CLC proposal msgs")
Reported-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/smc/smc_clc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/smc/smc_clc.c b/net/smc/smc_clc.c
index aee9ccfa99c2..ade1232699bb 100644
--- a/net/smc/smc_clc.c
+++ b/net/smc/smc_clc.c
@@ -164,7 +164,8 @@ static int smc_clc_prfx_set(struct socket *clcsock,
 		goto out_rel;
 	}
 	/* get address to which the internal TCP socket is bound */
-	kernel_getsockname(clcsock, (struct sockaddr *)&addrs);
+	if (kernel_getsockname(clcsock, (struct sockaddr *)&addrs) < 0)
+		goto out_rel;
 	/* analyze IP specific data of net_device belonging to TCP socket */
 	addr6 = (struct sockaddr_in6 *)&addrs;
 	rcu_read_lock();
-- 
2.33.0

[PATCH 5.4 30/68] gpio: uniphier: Fix void functions to remove return value

[Greg Kroah-Hartman]

From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>

[ Upstream commit 2dd824cca3407bc9a2bd11b00f6e117b66fcfcf1 ]

The return type of irq_chip.irq_mask() and irq_chip.irq_unmask() should
be void.

Fixes: dbe776c2ca54 ("gpio: uniphier: add UniPhier GPIO controller driver")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-uniphier.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpio-uniphier.c b/drivers/gpio/gpio-uniphier.c
index 93cdcc41e9fb..0f1cf50b4dce 100644
--- a/drivers/gpio/gpio-uniphier.c
+++ b/drivers/gpio/gpio-uniphier.c
@@ -188,7 +188,7 @@ static void uniphier_gpio_irq_mask(struct irq_data *data)
 
 	uniphier_gpio_reg_update(priv, UNIPHIER_GPIO_IRQ_EN, mask, 0);
 
-	return irq_chip_mask_parent(data);
+	irq_chip_mask_parent(data);
 }
 
 static void uniphier_gpio_irq_unmask(struct irq_data *data)
@@ -198,7 +198,7 @@ static void uniphier_gpio_irq_unmask(struct irq_data *data)
 
 	uniphier_gpio_reg_update(priv, UNIPHIER_GPIO_IRQ_EN, mask, mask);
 
-	return irq_chip_unmask_parent(data);
+	irq_chip_unmask_parent(data);
 }
 
 static int uniphier_gpio_irq_set_type(struct irq_data *data, unsigned int type)
-- 
2.33.0

[PATCH 5.4 31/68] qed: rdma - dont wait for resources under hw error recovery flow

[Greg Kroah-Hartman]

From: Shai Malin <smalin@marvell.com>

[ Upstream commit 1ea7812326004afd2803cc968a4776ae5120a597 ]

If the HW device is during recovery, the HW resources will never return,
hence we shouldn't wait for the CID (HW context ID) bitmaps to clear.
This fix speeds up the error recovery flow.

Fixes: 64515dc899df ("qed: Add infrastructure for error detection and recovery")
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_iwarp.c | 8 ++++++++
 drivers/net/ethernet/qlogic/qed/qed_roce.c  | 8 ++++++++
 2 files changed, 16 insertions(+)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
index 9adbaccd0c5e..934740d60470 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
@@ -1307,6 +1307,14 @@ qed_iwarp_wait_cid_map_cleared(struct qed_hwfn *p_hwfn, struct qed_bmap *bmap)
 	prev_weight = weight;
 
 	while (weight) {
+		/* If the HW device is during recovery, all resources are
+		 * immediately reset without receiving a per-cid indication
+		 * from HW. In this case we don't expect the cid_map to be
+		 * cleared.
+		 */
+		if (p_hwfn->cdev->recov_in_prog)
+			return 0;
+
 		msleep(QED_IWARP_MAX_CID_CLEAN_TIME);
 
 		weight = bitmap_weight(bmap->bitmap, bmap->max_count);
diff --git a/drivers/net/ethernet/qlogic/qed/qed_roce.c b/drivers/net/ethernet/qlogic/qed/qed_roce.c
index 83817bb50e9f..6e6563b51d68 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_roce.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_roce.c
@@ -107,6 +107,14 @@ void qed_roce_stop(struct qed_hwfn *p_hwfn)
 	 * Beyond the added delay we clear the bitmap anyway.
 	 */
 	while (bitmap_weight(rcid_map->bitmap, rcid_map->max_count)) {
+		/* If the HW device is during recovery, all resources are
+		 * immediately reset without receiving a per-cid indication
+		 * from HW. In this case we don't expect the cid bitmap to be
+		 * cleared.
+		 */
+		if (p_hwfn->cdev->recov_in_prog)
+			return;
+
 		msleep(100);
 		if (wait_count++ > 20) {
 			DP_NOTICE(p_hwfn, "cid bitmap wait timed out\n");
-- 
2.33.0

[PATCH 5.4 32/68] net/mlx4_en: Dont allow aRFS for encapsulated packets

[Greg Kroah-Hartman]

From: Aya Levin <ayal@nvidia.com>

[ Upstream commit fdbccea419dc782079ce5881d2705cc9e3881480 ]

Driver doesn't support aRFS for encapsulated packets, return early error
in such a case.

Fixes: 1eb8c695bda9 ("net/mlx4_en: Add accelerated RFS support")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index d7d20b7fae39..250177b5bcac 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -371,6 +371,9 @@ mlx4_en_filter_rfs(struct net_device *net_dev, const struct sk_buff *skb,
 	int nhoff = skb_network_offset(skb);
 	int ret = 0;
 
+	if (skb->encapsulation)
+		return -EPROTONOSUPPORT;
+
 	if (skb->protocol != htons(ETH_P_IP))
 		return -EPROTONOSUPPORT;
 
-- 
2.33.0

[PATCH 5.4 33/68] scsi: iscsi: Adjust iface sysfs attr detection

[Greg Kroah-Hartman]

From: Baokun Li <libaokun1@huawei.com>

[ Upstream commit 4e28550829258f7dab97383acaa477bd724c0ff4 ]

ISCSI_NET_PARAM_IFACE_ENABLE belongs to enum iscsi_net_param instead of
iscsi_iface_param so move it to ISCSI_NET_PARAM. Otherwise, when we call
into the driver, we might not match and return that we don't want attr
visible in sysfs. Found in code review.

Link: https://lore.kernel.org/r/20210901085336.2264295-1-libaokun1@huawei.com
Fixes: e746f3451ec7 ("scsi: iscsi: Fix iface sysfs attr detection")
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi_transport_iscsi.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 77bba91b5714..6f21cb75d95f 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -434,9 +434,7 @@ static umode_t iscsi_iface_attr_is_visible(struct kobject *kobj,
 	struct iscsi_transport *t = iface->transport;
 	int param = -1;
 
-	if (attr == &dev_attr_iface_enabled.attr)
-		param = ISCSI_NET_PARAM_IFACE_ENABLE;
-	else if (attr == &dev_attr_iface_def_taskmgmt_tmo.attr)
+	if (attr == &dev_attr_iface_def_taskmgmt_tmo.attr)
 		param = ISCSI_IFACE_PARAM_DEF_TASKMGMT_TMO;
 	else if (attr == &dev_attr_iface_header_digest.attr)
 		param = ISCSI_IFACE_PARAM_HDRDGST_EN;
@@ -476,7 +474,9 @@ static umode_t iscsi_iface_attr_is_visible(struct kobject *kobj,
 	if (param != -1)
 		return t->attr_is_visible(ISCSI_IFACE_PARAM, param);
 
-	if (attr == &dev_attr_iface_vlan_id.attr)
+	if (attr == &dev_attr_iface_enabled.attr)
+		param = ISCSI_NET_PARAM_IFACE_ENABLE;
+	else if (attr == &dev_attr_iface_vlan_id.attr)
 		param = ISCSI_NET_PARAM_VLAN_ID;
 	else if (attr == &dev_attr_iface_vlan_priority.attr)
 		param = ISCSI_NET_PARAM_VLAN_PRIORITY;
-- 
2.33.0

[PATCH 5.4 34/68] tty: synclink_gt, drop unneeded forward declarations

[Greg Kroah-Hartman]

From: Jiri Slaby <jslaby@suse.cz>

[ Upstream commit b9b90fe655c0bd816847ac1bcbf179cfa2981ecb ]

Forward declarations make the code larger and rewrites harder. Harder as
they are often omitted from global changes. Remove forward declarations
which are not really needed, i.e. the definition of the function is
before its first use.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210302062214.29627-39-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/synclink_gt.c | 57 +--------------------------------------
 1 file changed, 1 insertion(+), 56 deletions(-)

diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index 36f1a4d870eb..4ef84ed54ea5 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -137,37 +137,14 @@ MODULE_PARM_DESC(maxframe, "Maximum frame size used by device (4096 to 65535)");
  */
 static struct tty_driver *serial_driver;
 
-static int  open(struct tty_struct *tty, struct file * filp);
-static void close(struct tty_struct *tty, struct file * filp);
-static void hangup(struct tty_struct *tty);
-static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
-
-static int  write(struct tty_struct *tty, const unsigned char *buf, int count);
-static int put_char(struct tty_struct *tty, unsigned char ch);
-static void send_xchar(struct tty_struct *tty, char ch);
 static void wait_until_sent(struct tty_struct *tty, int timeout);
-static int  write_room(struct tty_struct *tty);
-static void flush_chars(struct tty_struct *tty);
 static void flush_buffer(struct tty_struct *tty);
-static void tx_hold(struct tty_struct *tty);
 static void tx_release(struct tty_struct *tty);
 
-static int  ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg);
-static int  chars_in_buffer(struct tty_struct *tty);
-static void throttle(struct tty_struct * tty);
-static void unthrottle(struct tty_struct * tty);
-static int set_break(struct tty_struct *tty, int break_state);
-
 /*
- * generic HDLC support and callbacks
+ * generic HDLC support
  */
-#if SYNCLINK_GENERIC_HDLC
 #define dev_to_port(D) (dev_to_hdlc(D)->priv)
-static void hdlcdev_tx_done(struct slgt_info *info);
-static void hdlcdev_rx(struct slgt_info *info, char *buf, int size);
-static int  hdlcdev_init(struct slgt_info *info);
-static void hdlcdev_exit(struct slgt_info *info);
-#endif
 
 
 /*
@@ -186,9 +163,6 @@ struct cond_wait {
 	wait_queue_entry_t wait;
 	unsigned int data;
 };
-static void init_cond_wait(struct cond_wait *w, unsigned int data);
-static void add_cond_wait(struct cond_wait **head, struct cond_wait *w);
-static void remove_cond_wait(struct cond_wait **head, struct cond_wait *w);
 static void flush_cond_wait(struct cond_wait **head);
 
 /*
@@ -443,12 +417,8 @@ static void shutdown(struct slgt_info *info);
 static void program_hw(struct slgt_info *info);
 static void change_params(struct slgt_info *info);
 
-static int  register_test(struct slgt_info *info);
-static int  irq_test(struct slgt_info *info);
-static int  loopback_test(struct slgt_info *info);
 static int  adapter_test(struct slgt_info *info);
 
-static void reset_adapter(struct slgt_info *info);
 static void reset_port(struct slgt_info *info);
 static void async_mode(struct slgt_info *info);
 static void sync_mode(struct slgt_info *info);
@@ -457,14 +427,12 @@ static void rx_stop(struct slgt_info *info);
 static void rx_start(struct slgt_info *info);
 static void reset_rbufs(struct slgt_info *info);
 static void free_rbufs(struct slgt_info *info, unsigned int first, unsigned int last);
-static void rdma_reset(struct slgt_info *info);
 static bool rx_get_frame(struct slgt_info *info);
 static bool rx_get_buf(struct slgt_info *info);
 
 static void tx_start(struct slgt_info *info);
 static void tx_stop(struct slgt_info *info);
 static void tx_set_idle(struct slgt_info *info);
-static unsigned int free_tbuf_count(struct slgt_info *info);
 static unsigned int tbuf_bytes(struct slgt_info *info);
 static void reset_tbufs(struct slgt_info *info);
 static void tdma_reset(struct slgt_info *info);
@@ -472,26 +440,10 @@ static bool tx_load(struct slgt_info *info, const char *buf, unsigned int count)
 
 static void get_signals(struct slgt_info *info);
 static void set_signals(struct slgt_info *info);
-static void enable_loopback(struct slgt_info *info);
 static void set_rate(struct slgt_info *info, u32 data_rate);
 
-static int  bh_action(struct slgt_info *info);
-static void bh_handler(struct work_struct *work);
 static void bh_transmit(struct slgt_info *info);
-static void isr_serial(struct slgt_info *info);
-static void isr_rdma(struct slgt_info *info);
 static void isr_txeom(struct slgt_info *info, unsigned short status);
-static void isr_tdma(struct slgt_info *info);
-
-static int  alloc_dma_bufs(struct slgt_info *info);
-static void free_dma_bufs(struct slgt_info *info);
-static int  alloc_desc(struct slgt_info *info);
-static void free_desc(struct slgt_info *info);
-static int  alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count);
-static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count);
-
-static int  alloc_tmp_rbuf(struct slgt_info *info);
-static void free_tmp_rbuf(struct slgt_info *info);
 
 static void tx_timeout(struct timer_list *t);
 static void rx_timeout(struct timer_list *t);
@@ -509,10 +461,6 @@ static int  tx_abort(struct slgt_info *info);
 static int  rx_enable(struct slgt_info *info, int enable);
 static int  modem_input_wait(struct slgt_info *info,int arg);
 static int  wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr);
-static int  tiocmget(struct tty_struct *tty);
-static int  tiocmset(struct tty_struct *tty,
-				unsigned int set, unsigned int clear);
-static int set_break(struct tty_struct *tty, int break_state);
 static int  get_interface(struct slgt_info *info, int __user *if_mode);
 static int  set_interface(struct slgt_info *info, int if_mode);
 static int  set_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
@@ -526,9 +474,6 @@ static int  set_xctrl(struct slgt_info *info, int if_mode);
 /*
  * driver functions
  */
-static void add_device(struct slgt_info *info);
-static void device_init(int adapter_num, struct pci_dev *pdev);
-static int  claim_resources(struct slgt_info *info);
 static void release_resources(struct slgt_info *info);
 
 /*
-- 
2.33.0

[PATCH 5.4 35/68] tty: synclink_gt: rename a conflicting function name

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 06e49073dfba24df4b1073a068631b13a0039c34 ]

'set_signals()' in synclink_gt.c conflicts with an exported symbol
in arch/um/, so change set_signals() to set_gtsignals(). Keep
the function names similar by also changing get_signals() to
get_gtsignals().

../drivers/tty/synclink_gt.c:442:13: error: conflicting types for ‘set_signals’
 static void set_signals(struct slgt_info *info);
             ^~~~~~~~~~~
In file included from ../include/linux/irqflags.h:16:0,
                 from ../include/linux/spinlock.h:58,
                 from ../include/linux/mm_types.h:9,
                 from ../include/linux/buildid.h:5,
                 from ../include/linux/module.h:14,
                 from ../drivers/tty/synclink_gt.c:46:
../arch/um/include/asm/irqflags.h:6:5: note: previous declaration of ‘set_signals’ was here
 int set_signals(int enable);
     ^~~~~~~~~~~

Fixes: 705b6c7b34f2 ("[PATCH] new driver synclink_gt")
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210902003806.17054-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/synclink_gt.c | 44 +++++++++++++++++++--------------------
 1 file changed, 22 insertions(+), 22 deletions(-)

diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index 4ef84ed54ea5..ff345a8e0fcc 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -438,8 +438,8 @@ static void reset_tbufs(struct slgt_info *info);
 static void tdma_reset(struct slgt_info *info);
 static bool tx_load(struct slgt_info *info, const char *buf, unsigned int count);
 
-static void get_signals(struct slgt_info *info);
-static void set_signals(struct slgt_info *info);
+static void get_gtsignals(struct slgt_info *info);
+static void set_gtsignals(struct slgt_info *info);
 static void set_rate(struct slgt_info *info, u32 data_rate);
 
 static void bh_transmit(struct slgt_info *info);
@@ -721,7 +721,7 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 	if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) {
 		info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
 		spin_lock_irqsave(&info->lock,flags);
-		set_signals(info);
+		set_gtsignals(info);
 		spin_unlock_irqrestore(&info->lock,flags);
 	}
 
@@ -731,7 +731,7 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 		if (!C_CRTSCTS(tty) || !tty_throttled(tty))
 			info->signals |= SerialSignal_RTS;
 		spin_lock_irqsave(&info->lock,flags);
-	 	set_signals(info);
+	 	set_gtsignals(info);
 		spin_unlock_irqrestore(&info->lock,flags);
 	}
 
@@ -1182,7 +1182,7 @@ static inline void line_info(struct seq_file *m, struct slgt_info *info)
 
 	/* output current serial signal states */
 	spin_lock_irqsave(&info->lock,flags);
-	get_signals(info);
+	get_gtsignals(info);
 	spin_unlock_irqrestore(&info->lock,flags);
 
 	stat_buf[0] = 0;
@@ -1282,7 +1282,7 @@ static void throttle(struct tty_struct * tty)
 	if (C_CRTSCTS(tty)) {
 		spin_lock_irqsave(&info->lock,flags);
 		info->signals &= ~SerialSignal_RTS;
-		set_signals(info);
+		set_gtsignals(info);
 		spin_unlock_irqrestore(&info->lock,flags);
 	}
 }
@@ -1307,7 +1307,7 @@ static void unthrottle(struct tty_struct * tty)
 	if (C_CRTSCTS(tty)) {
 		spin_lock_irqsave(&info->lock,flags);
 		info->signals |= SerialSignal_RTS;
-		set_signals(info);
+		set_gtsignals(info);
 		spin_unlock_irqrestore(&info->lock,flags);
 	}
 }
@@ -1479,7 +1479,7 @@ static int hdlcdev_open(struct net_device *dev)
 
 	/* inform generic HDLC layer of current DCD status */
 	spin_lock_irqsave(&info->lock, flags);
-	get_signals(info);
+	get_gtsignals(info);
 	spin_unlock_irqrestore(&info->lock, flags);
 	if (info->signals & SerialSignal_DCD)
 		netif_carrier_on(dev);
@@ -2235,7 +2235,7 @@ static void isr_txeom(struct slgt_info *info, unsigned short status)
 		if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done) {
 			info->signals &= ~SerialSignal_RTS;
 			info->drop_rts_on_tx_done = false;
-			set_signals(info);
+			set_gtsignals(info);
 		}
 
 #if SYNCLINK_GENERIC_HDLC
@@ -2400,7 +2400,7 @@ static void shutdown(struct slgt_info *info)
 
  	if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) {
 		info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
-		set_signals(info);
+		set_gtsignals(info);
 	}
 
 	flush_cond_wait(&info->gpio_wait_q);
@@ -2428,7 +2428,7 @@ static void program_hw(struct slgt_info *info)
 	else
 		async_mode(info);
 
-	set_signals(info);
+	set_gtsignals(info);
 
 	info->dcd_chkcount = 0;
 	info->cts_chkcount = 0;
@@ -2436,7 +2436,7 @@ static void program_hw(struct slgt_info *info)
 	info->dsr_chkcount = 0;
 
 	slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR | IRQ_RI);
-	get_signals(info);
+	get_gtsignals(info);
 
 	if (info->netcount ||
 	    (info->port.tty && info->port.tty->termios.c_cflag & CREAD))
@@ -2680,7 +2680,7 @@ static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr)
 	spin_lock_irqsave(&info->lock,flags);
 
 	/* return immediately if state matches requested events */
-	get_signals(info);
+	get_gtsignals(info);
 	s = info->signals;
 
 	events = mask &
@@ -3098,7 +3098,7 @@ static int tiocmget(struct tty_struct *tty)
  	unsigned long flags;
 
 	spin_lock_irqsave(&info->lock,flags);
- 	get_signals(info);
+ 	get_gtsignals(info);
 	spin_unlock_irqrestore(&info->lock,flags);
 
 	result = ((info->signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
@@ -3137,7 +3137,7 @@ static int tiocmset(struct tty_struct *tty,
 		info->signals &= ~SerialSignal_DTR;
 
 	spin_lock_irqsave(&info->lock,flags);
-	set_signals(info);
+	set_gtsignals(info);
 	spin_unlock_irqrestore(&info->lock,flags);
 	return 0;
 }
@@ -3148,7 +3148,7 @@ static int carrier_raised(struct tty_port *port)
 	struct slgt_info *info = container_of(port, struct slgt_info, port);
 
 	spin_lock_irqsave(&info->lock,flags);
-	get_signals(info);
+	get_gtsignals(info);
 	spin_unlock_irqrestore(&info->lock,flags);
 	return (info->signals & SerialSignal_DCD) ? 1 : 0;
 }
@@ -3163,7 +3163,7 @@ static void dtr_rts(struct tty_port *port, int on)
 		info->signals |= SerialSignal_RTS | SerialSignal_DTR;
 	else
 		info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
-	set_signals(info);
+	set_gtsignals(info);
 	spin_unlock_irqrestore(&info->lock,flags);
 }
 
@@ -3962,10 +3962,10 @@ static void tx_start(struct slgt_info *info)
 
 		if (info->params.mode != MGSL_MODE_ASYNC) {
 			if (info->params.flags & HDLC_FLAG_AUTO_RTS) {
-				get_signals(info);
+				get_gtsignals(info);
 				if (!(info->signals & SerialSignal_RTS)) {
 					info->signals |= SerialSignal_RTS;
-					set_signals(info);
+					set_gtsignals(info);
 					info->drop_rts_on_tx_done = true;
 				}
 			}
@@ -4019,7 +4019,7 @@ static void reset_port(struct slgt_info *info)
 	rx_stop(info);
 
 	info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
-	set_signals(info);
+	set_gtsignals(info);
 
 	slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
 }
@@ -4441,7 +4441,7 @@ static void tx_set_idle(struct slgt_info *info)
 /*
  * get state of V24 status (input) signals
  */
-static void get_signals(struct slgt_info *info)
+static void get_gtsignals(struct slgt_info *info)
 {
 	unsigned short status = rd_reg16(info, SSR);
 
@@ -4503,7 +4503,7 @@ static void msc_set_vcr(struct slgt_info *info)
 /*
  * set state of V24 control (output) signals
  */
-static void set_signals(struct slgt_info *info)
+static void set_gtsignals(struct slgt_info *info)
 {
 	unsigned char val = rd_reg8(info, VCR);
 	if (info->signals & SerialSignal_DTR)
-- 
2.33.0

[PATCH 5.4 36/68] fpga: machxo2-spi: Return an error on failure

[Greg Kroah-Hartman]

From: Tom Rix <trix@redhat.com>

[ Upstream commit 34331739e19fd6a293d488add28832ad49c9fc54 ]

Earlier successes leave 'ret' in a non error state, so these errors are
not reported. Set ret to -EINVAL before going to the error handler.

This addresses two issues reported by smatch:
drivers/fpga/machxo2-spi.c:229 machxo2_write_init()
  warn: missing error code 'ret'

drivers/fpga/machxo2-spi.c:316 machxo2_write_complete()
  warn: missing error code 'ret'

[mdf@kernel.org: Reworded commit message]
Fixes: 88fb3a002330 ("fpga: lattice machxo2: Add Lattice MachXO2 support")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/fpga/machxo2-spi.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/fpga/machxo2-spi.c b/drivers/fpga/machxo2-spi.c
index 4d8a87641587..2fd097c3994b 100644
--- a/drivers/fpga/machxo2-spi.c
+++ b/drivers/fpga/machxo2-spi.c
@@ -223,8 +223,10 @@ static int machxo2_write_init(struct fpga_manager *mgr,
 		goto fail;
 
 	get_status(spi, &status);
-	if (test_bit(FAIL, &status))
+	if (test_bit(FAIL, &status)) {
+		ret = -EINVAL;
 		goto fail;
+	}
 	dump_status_reg(&status);
 
 	spi_message_init(&msg);
@@ -310,6 +312,7 @@ static int machxo2_write_complete(struct fpga_manager *mgr,
 	dump_status_reg(&status);
 	if (!test_bit(DONE, &status)) {
 		machxo2_cleanup(mgr);
+		ret = -EINVAL;
 		goto fail;
 	}
 
-- 
2.33.0

[PATCH 5.4 37/68] fpga: machxo2-spi: Fix missing error code in machxo2_write_complete()

[Greg Kroah-Hartman]

From: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>

[ Upstream commit a1e4470823d99e75b596748086e120dea169ed3c ]

The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'ret'.

Eliminate the follow smatch warning:

drivers/fpga/machxo2-spi.c:341 machxo2_write_complete()
  warn: missing error code 'ret'.

[mdf@kernel.org: Reworded commit message]
Fixes: 88fb3a002330 ("fpga: lattice machxo2: Add Lattice MachXO2 support")
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/fpga/machxo2-spi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/fpga/machxo2-spi.c b/drivers/fpga/machxo2-spi.c
index 2fd097c3994b..37e54e375528 100644
--- a/drivers/fpga/machxo2-spi.c
+++ b/drivers/fpga/machxo2-spi.c
@@ -334,6 +334,7 @@ static int machxo2_write_complete(struct fpga_manager *mgr,
 			break;
 		if (++refreshloop == MACHXO2_MAX_REFRESH_LOOP) {
 			machxo2_cleanup(mgr);
+			ret = -EINVAL;
 			goto fail;
 		}
 	} while (1);
-- 
2.33.0

[PATCH 5.4 38/68] thermal/core: Potential buffer overflow in thermal_build_list_of_policies()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 1bb30b20b49773369c299d4d6c65227201328663 ]

After printing the list of thermal governors, then this function prints
a newline character.  The problem is that "size" has not been updated
after printing the last governor.  This means that it can write one
character (the NUL terminator) beyond the end of the buffer.

Get rid of the "size" variable and just use "PAGE_SIZE - count" directly.

Fixes: 1b4f48494eb2 ("thermal: core: group functions related to governor handling")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210916131342.GB25094@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/thermal_core.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index f526ce31f5a2..20eab56b02cb 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -228,15 +228,14 @@ int thermal_build_list_of_policies(char *buf)
 {
 	struct thermal_governor *pos;
 	ssize_t count = 0;
-	ssize_t size = PAGE_SIZE;
 
 	mutex_lock(&thermal_governor_lock);
 
 	list_for_each_entry(pos, &thermal_governor_list, governor_list) {
-		size = PAGE_SIZE - count;
-		count += scnprintf(buf + count, size, "%s ", pos->name);
+		count += scnprintf(buf + count, PAGE_SIZE - count, "%s ",
+				   pos->name);
 	}
-	count += scnprintf(buf + count, size, "\n");
+	count += scnprintf(buf + count, PAGE_SIZE - count, "\n");
 
 	mutex_unlock(&thermal_governor_lock);
 
-- 
2.33.0

[PATCH 5.4 39/68] cifs: fix a sign extension bug

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit e946d3c887a9dc33aa82a349c6284f4a084163f4 ]

The problem is the mismatched types between "ctx->total_len" which is
an unsigned int, "rc" which is an int, and "ctx->rc" which is a
ssize_t.  The code does:

	ctx->rc = (rc == 0) ? ctx->total_len : rc;

We want "ctx->rc" to store the negative "rc" error code.  But what
happens is that "rc" is type promoted to a high unsigned int and
'ctx->rc" will store the high positive value instead of a negative
value.

The fix is to change "rc" from an int to a ssize_t.

Fixes: c610c4b619e5 ("CIFS: Add asynchronous write support through kernel AIO")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/file.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 1aac8d38f887..a9746af5a44d 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -2989,7 +2989,7 @@ static void collect_uncached_write_data(struct cifs_aio_ctx *ctx)
 	struct cifs_tcon *tcon;
 	struct cifs_sb_info *cifs_sb;
 	struct dentry *dentry = ctx->cfile->dentry;
-	int rc;
+	ssize_t rc;
 
 	tcon = tlink_tcon(ctx->cfile->tlink);
 	cifs_sb = CIFS_SB(dentry->d_sb);
-- 
2.33.0

[PATCH 5.4 40/68] scsi: qla2xxx: Restore initiator in dual mode

[Greg Kroah-Hartman]

From: Dmitry Bogdanov <d.bogdanov@yadro.com>

[ Upstream commit 5f8579038842d77e6ce05e1df6bf9dd493b0e3ef ]

In dual mode in case of disabling the target, the whole port goes offline
and initiator is turned off too.

Fix restoring initiator mode after disabling target in dual mode.

Link: https://lore.kernel.org/r/20210915153239.8035-1-d.bogdanov@yadro.com
Fixes: 0645cb8350cd ("scsi: qla2xxx: Add mode control for each physical port")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_init.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 643b8ae36cbe..5dae7ac0d3ef 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -6803,7 +6803,8 @@ qla2x00_abort_isp(scsi_qla_host_t *vha)
 				return 0;
 			break;
 		case QLA2XXX_INI_MODE_DUAL:
-			if (!qla_dual_mode_enabled(vha))
+			if (!qla_dual_mode_enabled(vha) &&
+			    !qla_ini_mode_enabled(vha))
 				return 0;
 			break;
 		case QLA2XXX_INI_MODE_ENABLED:
-- 
2.33.0

[PATCH 5.4 41/68] scsi: lpfc: Use correct scnprintf() limit

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 6dacc371b77f473770ec646e220303a84fe96c11 ]

The limit should be "PAGE_SIZE - len" instead of "PAGE_SIZE".  We're not
going to hit the limit so this fix will not affect runtime.

Link: https://lore.kernel.org/r/20210916132331.GE25094@kili
Fixes: 5b9e70b22cc5 ("scsi: lpfc: raise sg count for nvme to use available sg resources")
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_attr.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 45db19e31b34..f0ecfe565660 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -5881,7 +5881,8 @@ lpfc_sg_seg_cnt_show(struct device *dev, struct device_attribute *attr,
 	len = scnprintf(buf, PAGE_SIZE, "SGL sz: %d  total SGEs: %d\n",
 		       phba->cfg_sg_dma_buf_size, phba->cfg_total_seg_cnt);
 
-	len += scnprintf(buf + len, PAGE_SIZE, "Cfg: %d  SCSI: %d  NVME: %d\n",
+	len += scnprintf(buf + len, PAGE_SIZE - len,
+			"Cfg: %d  SCSI: %d  NVME: %d\n",
 			phba->cfg_sg_seg_cnt, phba->cfg_scsi_seg_cnt,
 			phba->cfg_nvme_seg_cnt);
 	return len;
-- 
2.33.0

[PATCH 5.4 42/68] irqchip/goldfish-pic: Select GENERIC_IRQ_CHIP to fix build

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 969ac78db78c723a24e9410666b457cc1b0cb3c3 ]

irq-goldfish-pic uses GENERIC_IRQ_CHIP interfaces so select that symbol
to fix build errors.

Fixes these build errors:

mips-linux-ld: drivers/irqchip/irq-goldfish-pic.o: in function `goldfish_pic_of_init':
irq-goldfish-pic.c:(.init.text+0xc0): undefined reference to `irq_alloc_generic_chip'
mips-linux-ld: irq-goldfish-pic.c:(.init.text+0xf4): undefined reference to `irq_gc_unmask_enable_reg'
mips-linux-ld: irq-goldfish-pic.c:(.init.text+0xf8): undefined reference to `irq_gc_unmask_enable_reg'
mips-linux-ld: irq-goldfish-pic.c:(.init.text+0x100): undefined reference to `irq_gc_mask_disable_reg'
mips-linux-ld: irq-goldfish-pic.c:(.init.text+0x104): undefined reference to `irq_gc_mask_disable_reg'
mips-linux-ld: irq-goldfish-pic.c:(.init.text+0x11c): undefined reference to `irq_setup_generic_chip'
mips-linux-ld: irq-goldfish-pic.c:(.init.text+0x168): undefined reference to `irq_remove_generic_chip'

Fixes: 4235ff50cf98 ("irqchip/irq-goldfish-pic: Add Goldfish PIC driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Miodrag Dinic <miodrag.dinic@mips.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Goran Ferenc <goran.ferenc@mips.com>
Cc: Aleksandar Markovic <aleksandar.markovic@mips.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210905162519.21507-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 97f9c001d8ff..20f44ef9c4c9 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -415,6 +415,7 @@ config MESON_IRQ_GPIO
 config GOLDFISH_PIC
        bool "Goldfish programmable interrupt controller"
        depends on MIPS && (GOLDFISH || COMPILE_TEST)
+       select GENERIC_IRQ_CHIP
        select IRQ_DOMAIN
        help
          Say yes here to enable Goldfish interrupt controller driver used
-- 
2.33.0

[PATCH 5.4 43/68] irqchip/gic-v3-its: Fix potential VPE leak on error

[Greg Kroah-Hartman]

From: Kaige Fu <kaige.fu@linux.alibaba.com>

[ Upstream commit 280bef512933b2dda01d681d8cbe499b98fc5bdd ]

In its_vpe_irq_domain_alloc, when its_vpe_init() returns an error,
there is an off-by-one in the number of VPEs to be freed.

Fix it by simply passing the number of VPEs allocated, which is the
index of the loop iterating over the VPEs.

Fixes: 7d75bbb4bc1a ("irqchip/gic-v3-its: Add VPE irq domain allocation/teardown")
Signed-off-by: Kaige Fu <kaige.fu@linux.alibaba.com>
[maz: fixed commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/d9e36dee512e63670287ed9eff884a5d8d6d27f2.1631672311.git.kaige.fu@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-gic-v3-its.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index f298313b87ac..398c54387988 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -3123,7 +3123,7 @@ static int its_vpe_irq_domain_alloc(struct irq_domain *domain, unsigned int virq
 
 	if (err) {
 		if (i > 0)
-			its_vpe_irq_domain_free(domain, virq, i - 1);
+			its_vpe_irq_domain_free(domain, virq, i);
 
 		its_lpi_free(bitmap, base, nr_ids);
 		its_free_prop_table(vprop_page);
-- 
2.33.0

[PATCH 5.4 44/68] md: fix a lock order reversal in md_alloc

[Greg Kroah-Hartman]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit 7df835a32a8bedf7ce88efcfa7c9b245b52ff139 ]

Commit b0140891a8cea3 ("md: Fix race when creating a new md device.")
not only moved assigning mddev->gendisk before calling add_disk, which
fixes the races described in the commit log, but also added a
mddev->open_mutex critical section over add_disk and creation of the
md kobj.  Adding a kobject after add_disk is racy vs deleting the gendisk
right after adding it, but md already prevents against that by holding
a mddev->active reference.

On the other hand taking this lock added a lock order reversal with what
is not disk->open_mutex (used to be bdev->bd_mutex when the commit was
added) for partition devices, which need that lock for the internal open
for the partition scan, and a recent commit also takes it for
non-partitioned devices, leading to further lockdep splatter.

Fixes: b0140891a8ce ("md: Fix race when creating a new md device.")
Fixes: d62633873590 ("block: support delayed holder registration")
Reported-by: syzbot+fadc0aaf497e6a493b9f@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: syzbot+fadc0aaf497e6a493b9f@syzkaller.appspotmail.com
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/md.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 761d43829b2b..c178b2f406de 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -5535,10 +5535,6 @@ static int md_alloc(dev_t dev, char *name)
 	 */
 	disk->flags |= GENHD_FL_EXT_DEVT;
 	mddev->gendisk = disk;
-	/* As soon as we call add_disk(), another thread could get
-	 * through to md_open, so make sure it doesn't get too far
-	 */
-	mutex_lock(&mddev->open_mutex);
 	add_disk(disk);
 
 	error = kobject_add(&mddev->kobj, &disk_to_dev(disk)->kobj, "%s", "md");
@@ -5553,7 +5549,6 @@ static int md_alloc(dev_t dev, char *name)
 	if (mddev->kobj.sd &&
 	    sysfs_create_group(&mddev->kobj, &md_bitmap_group))
 		pr_debug("pointless warning\n");
-	mutex_unlock(&mddev->open_mutex);
  abort:
 	mutex_unlock(&disks_mutex);
 	if (!error && mddev->kobj.sd) {
-- 
2.33.0

[PATCH 5.4 45/68] blktrace: Fix uaf in blk_trace access after removing by sysfs

[Greg Kroah-Hartman]

From: Zhihao Cheng <chengzhihao1@huawei.com>

[ Upstream commit 5afedf670caf30a2b5a52da96eb7eac7dee6a9c9 ]

There is an use-after-free problem triggered by following process:

      P1(sda)				P2(sdb)
			echo 0 > /sys/block/sdb/trace/enable
			  blk_trace_remove_queue
			    synchronize_rcu
			    blk_trace_free
			      relay_close
rcu_read_lock
__blk_add_trace
  trace_note_tsk
  (Iterate running_trace_list)
			        relay_close_buf
				  relay_destroy_buf
				    kfree(buf)
    trace_note(sdb's bt)
      relay_reserve
        buf->offset <- nullptr deference (use-after-free) !!!
rcu_read_unlock

[  502.714379] BUG: kernel NULL pointer dereference, address:
0000000000000010
[  502.715260] #PF: supervisor read access in kernel mode
[  502.715903] #PF: error_code(0x0000) - not-present page
[  502.716546] PGD 103984067 P4D 103984067 PUD 17592b067 PMD 0
[  502.717252] Oops: 0000 [#1] SMP
[  502.720308] RIP: 0010:trace_note.isra.0+0x86/0x360
[  502.732872] Call Trace:
[  502.733193]  __blk_add_trace.cold+0x137/0x1a3
[  502.733734]  blk_add_trace_rq+0x7b/0xd0
[  502.734207]  blk_add_trace_rq_issue+0x54/0xa0
[  502.734755]  blk_mq_start_request+0xde/0x1b0
[  502.735287]  scsi_queue_rq+0x528/0x1140
...
[  502.742704]  sg_new_write.isra.0+0x16e/0x3e0
[  502.747501]  sg_ioctl+0x466/0x1100

Reproduce method:
  ioctl(/dev/sda, BLKTRACESETUP, blk_user_trace_setup[buf_size=127])
  ioctl(/dev/sda, BLKTRACESTART)
  ioctl(/dev/sdb, BLKTRACESETUP, blk_user_trace_setup[buf_size=127])
  ioctl(/dev/sdb, BLKTRACESTART)

  echo 0 > /sys/block/sdb/trace/enable &
  // Add delay(mdelay/msleep) before kernel enters blk_trace_free()

  ioctl$SG_IO(/dev/sda, SG_IO, ...)
  // Enters trace_note_tsk() after blk_trace_free() returned
  // Use mdelay in rcu region rather than msleep(which may schedule out)

Remove blk_trace from running_list before calling blk_trace_free() by
sysfs if blk_trace is at Blktrace_running state.

Fixes: c71a896154119f ("blktrace: add ftrace plugin")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Link: https://lore.kernel.org/r/20210923134921.109194-1-chengzhihao1@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/blktrace.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index 884333b9fc76..749b27851f45 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -1656,6 +1656,14 @@ static int blk_trace_remove_queue(struct request_queue *q)
 	if (bt == NULL)
 		return -EINVAL;
 
+	if (bt->trace_state == Blktrace_running) {
+		bt->trace_state = Blktrace_stopped;
+		spin_lock_irq(&running_trace_lock);
+		list_del_init(&bt->running_list);
+		spin_unlock_irq(&running_trace_lock);
+		relay_flush(bt->rchan);
+	}
+
 	put_probe_ref();
 	synchronize_rcu();
 	blk_trace_free(bt);
-- 
2.33.0

[PATCH 5.4 46/68] net: macb: fix use after free on rmmod

[Greg Kroah-Hartman]

From: Tong Zhang <ztong0001@gmail.com>

[ Upstream commit d82d5303c4c539db86588ffb5dc5b26c3f1513e8 ]

plat_dev->dev->platform_data is released by platform_device_unregister(),
use of pclk and hclk is a use-after-free. Since device unregister won't
need a clk device we adjust the function call sequence to fix this issue.

[   31.261225] BUG: KASAN: use-after-free in macb_remove+0x77/0xc6 [macb_pci]
[   31.275563] Freed by task 306:
[   30.276782]  platform_device_release+0x25/0x80

Suggested-by: Nicolas Ferre <Nicolas.Ferre@microchip.com>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cadence/macb_pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/cadence/macb_pci.c b/drivers/net/ethernet/cadence/macb_pci.c
index 617b3b728dd0..94f3babfad30 100644
--- a/drivers/net/ethernet/cadence/macb_pci.c
+++ b/drivers/net/ethernet/cadence/macb_pci.c
@@ -112,9 +112,9 @@ static void macb_remove(struct pci_dev *pdev)
 	struct platform_device *plat_dev = pci_get_drvdata(pdev);
 	struct macb_platform_data *plat_data = dev_get_platdata(&plat_dev->dev);
 
-	platform_device_unregister(plat_dev);
 	clk_unregister(plat_data->pclk);
 	clk_unregister(plat_data->hclk);
+	platform_device_unregister(plat_dev);
 }
 
 static const struct pci_device_id dev_id_table[] = {
-- 
2.33.0

[PATCH 5.4 47/68] net: stmmac: allow CSR clock of 300MHz

[Greg Kroah-Hartman]

From: Jesper Nilsson <jesper.nilsson@axis.com>

[ Upstream commit 08dad2f4d541fcfe5e7bfda72cc6314bbfd2802f ]

The Synopsys Ethernet IP uses the CSR clock as a base clock for MDC.
The divisor used is set in the MAC_MDIO_Address register field CR
(Clock Rate)

The divisor is there to change the CSR clock into a clock that falls
below the IEEE 802.3 specified max frequency of 2.5MHz.

If the CSR clock is 300MHz, the code falls back to using the reset
value in the MAC_MDIO_Address register, as described in the comment
above this code.

However, 300MHz is actually an allowed value and the proper divider
can be estimated quite easily (it's just 1Hz difference!)

A CSR frequency of 300MHz with the maximum clock rate value of 0x5
(STMMAC_CSR_250_300M, a divisor of 124) gives somewhere around
~2.42MHz which is below the IEEE 802.3 specified maximum.

For the ARTPEC-8 SoC, the CSR clock is this problematic 300MHz,
and unfortunately, the reset-value of the MAC_MDIO_Address CR field
is 0x0.

This leads to a clock rate of zero and a divisor of 42, and gives an
MDC frequency of ~7.14MHz.

Allow CSR clock of 300MHz by making the comparison inclusive.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 4e7cfd3bfcd2..e09851c7da9b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -225,7 +225,7 @@ static void stmmac_clk_csr_set(struct stmmac_priv *priv)
 			priv->clk_csr = STMMAC_CSR_100_150M;
 		else if ((clk_rate >= CSR_F_150M) && (clk_rate < CSR_F_250M))
 			priv->clk_csr = STMMAC_CSR_150_250M;
-		else if ((clk_rate >= CSR_F_250M) && (clk_rate < CSR_F_300M))
+		else if ((clk_rate >= CSR_F_250M) && (clk_rate <= CSR_F_300M))
 			priv->clk_csr = STMMAC_CSR_250_300M;
 	}
 
-- 
2.33.0

[PATCH 5.4 48/68] m68k: Double cast io functions to unsigned long

[Greg Kroah-Hartman]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit b1a89856fbf63fffde6a4771d8f1ac21df549e50 ]

m68k builds fail widely with errors such as

arch/m68k/include/asm/raw_io.h:20:19: error:
	cast to pointer from integer of different size
arch/m68k/include/asm/raw_io.h:30:32: error:
	cast to pointer from integer of different size [-Werror=int-to-p

On m68k, io functions are defined as macros. The problem is seen if the
macro parameter variable size differs from the size of a pointer. Cast
the parameter of all io macros to unsigned long before casting it to
a pointer to fix the problem.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210907060729.2391992-1-linux@roeck-us.net
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/m68k/include/asm/raw_io.h | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/m68k/include/asm/raw_io.h b/arch/m68k/include/asm/raw_io.h
index 8a6dc6e5a279..8ab3c350bd53 100644
--- a/arch/m68k/include/asm/raw_io.h
+++ b/arch/m68k/include/asm/raw_io.h
@@ -17,21 +17,21 @@
  * two accesses to memory, which may be undesirable for some devices.
  */
 #define in_8(addr) \
-    ({ u8 __v = (*(__force volatile u8 *) (addr)); __v; })
+    ({ u8 __v = (*(__force volatile u8 *) (unsigned long)(addr)); __v; })
 #define in_be16(addr) \
-    ({ u16 __v = (*(__force volatile u16 *) (addr)); __v; })
+    ({ u16 __v = (*(__force volatile u16 *) (unsigned long)(addr)); __v; })
 #define in_be32(addr) \
-    ({ u32 __v = (*(__force volatile u32 *) (addr)); __v; })
+    ({ u32 __v = (*(__force volatile u32 *) (unsigned long)(addr)); __v; })
 #define in_le16(addr) \
-    ({ u16 __v = le16_to_cpu(*(__force volatile __le16 *) (addr)); __v; })
+    ({ u16 __v = le16_to_cpu(*(__force volatile __le16 *) (unsigned long)(addr)); __v; })
 #define in_le32(addr) \
-    ({ u32 __v = le32_to_cpu(*(__force volatile __le32 *) (addr)); __v; })
+    ({ u32 __v = le32_to_cpu(*(__force volatile __le32 *) (unsigned long)(addr)); __v; })
 
-#define out_8(addr,b) (void)((*(__force volatile u8 *) (addr)) = (b))
-#define out_be16(addr,w) (void)((*(__force volatile u16 *) (addr)) = (w))
-#define out_be32(addr,l) (void)((*(__force volatile u32 *) (addr)) = (l))
-#define out_le16(addr,w) (void)((*(__force volatile __le16 *) (addr)) = cpu_to_le16(w))
-#define out_le32(addr,l) (void)((*(__force volatile __le32 *) (addr)) = cpu_to_le32(l))
+#define out_8(addr,b) (void)((*(__force volatile u8 *) (unsigned long)(addr)) = (b))
+#define out_be16(addr,w) (void)((*(__force volatile u16 *) (unsigned long)(addr)) = (w))
+#define out_be32(addr,l) (void)((*(__force volatile u32 *) (unsigned long)(addr)) = (l))
+#define out_le16(addr,w) (void)((*(__force volatile __le16 *) (unsigned long)(addr)) = cpu_to_le16(w))
+#define out_le32(addr,l) (void)((*(__force volatile __le32 *) (unsigned long)(addr)) = cpu_to_le32(l))
 
 #define raw_inb in_8
 #define raw_inw in_be16
-- 
2.33.0

[PATCH 5.4 49/68] ipv6: delay fib6_sernum increase in fib6_add

[Greg Kroah-Hartman]

From: zhang kai <zhangkaiheb@126.com>

[ Upstream commit e87b5052271e39d62337ade531992b7e5d8c2cfa ]

only increase fib6_sernum in net namespace after add fib6_info
successfully.

Signed-off-by: zhang kai <zhangkaiheb@126.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/ip6_fib.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c
index bb68290ad68d..9a6f66e0e9a2 100644
--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -1310,7 +1310,6 @@ int fib6_add(struct fib6_node *root, struct fib6_info *rt,
 	int err = -ENOMEM;
 	int allow_create = 1;
 	int replace_required = 0;
-	int sernum = fib6_new_sernum(info->nl_net);
 
 	if (info->nlh) {
 		if (!(info->nlh->nlmsg_flags & NLM_F_CREATE))
@@ -1410,7 +1409,7 @@ int fib6_add(struct fib6_node *root, struct fib6_info *rt,
 	if (!err) {
 		if (rt->nh)
 			list_add(&rt->nh_list, &rt->nh->f6i_list);
-		__fib6_update_sernum_upto_root(rt, sernum);
+		__fib6_update_sernum_upto_root(rt, fib6_new_sernum(info->nl_net));
 		fib6_start_gc(info->nl_net, rt);
 	}
 
-- 
2.33.0

[PATCH 5.4 50/68] bpf: Add oversize check before call kvcalloc()

[Greg Kroah-Hartman]

From: Bixuan Cui <cuibixuan@huawei.com>

[ Upstream commit 0e6491b559704da720f6da09dd0a52c4df44c514 ]

Commit 7661809d493b ("mm: don't allow oversized kvmalloc() calls") add the
oversize check. When the allocation is larger than what kmalloc() supports,
the following warning triggered:

WARNING: CPU: 0 PID: 8408 at mm/util.c:597 kvmalloc_node+0x108/0x110 mm/util.c:597
Modules linked in:
CPU: 0 PID: 8408 Comm: syz-executor221 Not tainted 5.14.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:kvmalloc_node+0x108/0x110 mm/util.c:597
Call Trace:
 kvmalloc include/linux/mm.h:806 [inline]
 kvmalloc_array include/linux/mm.h:824 [inline]
 kvcalloc include/linux/mm.h:829 [inline]
 check_btf_line kernel/bpf/verifier.c:9925 [inline]
 check_btf_info kernel/bpf/verifier.c:10049 [inline]
 bpf_check+0xd634/0x150d0 kernel/bpf/verifier.c:13759
 bpf_prog_load kernel/bpf/syscall.c:2301 [inline]
 __sys_bpf+0x11181/0x126e0 kernel/bpf/syscall.c:4587
 __do_sys_bpf kernel/bpf/syscall.c:4691 [inline]
 __se_sys_bpf kernel/bpf/syscall.c:4689 [inline]
 __x64_sys_bpf+0x78/0x90 kernel/bpf/syscall.c:4689
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Reported-by: syzbot+f3e749d4c662818ae439@syzkaller.appspotmail.com
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210911005557.45518-1-cuibixuan@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/verifier.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 60383b28549b..9c5fa5c52903 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -6839,6 +6839,8 @@ static int check_btf_line(struct bpf_verifier_env *env,
 	nr_linfo = attr->line_info_cnt;
 	if (!nr_linfo)
 		return 0;
+	if (nr_linfo > INT_MAX / sizeof(struct bpf_line_info))
+		return -EINVAL;
 
 	rec_size = attr->line_info_rec_size;
 	if (rec_size < MIN_BPF_LINEINFO_SIZE ||
-- 
2.33.0

[PATCH 5.4 51/68] xen/balloon: use a kernel thread instead a workqueue

[Greg Kroah-Hartman]

From: Juergen Gross <jgross@suse.com>

[ Upstream commit 8480ed9c2bbd56fc86524998e5f2e3e22f5038f6 ]

Today the Xen ballooning is done via delayed work in a workqueue. This
might result in workqueue hangups being reported in case of large
amounts of memory are being ballooned in one go (here 16GB):

BUG: workqueue lockup - pool cpus=6 node=0 flags=0x0 nice=0 stuck for 64s!
Showing busy workqueues and worker pools:
workqueue events: flags=0x0
  pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=2/256 refcnt=3
    in-flight: 229:balloon_process
    pending: cache_reap
workqueue events_freezable_power_: flags=0x84
  pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
    pending: disk_events_workfn
workqueue mm_percpu_wq: flags=0x8
  pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
    pending: vmstat_update
pool 12: cpus=6 node=0 flags=0x0 nice=0 hung=64s workers=3 idle: 2222 43

This can easily be avoided by using a dedicated kernel thread for doing
the ballooning work.

Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210827123206.15429-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/xen/balloon.c | 62 +++++++++++++++++++++++++++++++------------
 1 file changed, 45 insertions(+), 17 deletions(-)

diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index ebb05517b6aa..2762d246991b 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -43,6 +43,8 @@
 #include <linux/sched.h>
 #include <linux/cred.h>
 #include <linux/errno.h>
+#include <linux/freezer.h>
+#include <linux/kthread.h>
 #include <linux/mm.h>
 #include <linux/memblock.h>
 #include <linux/pagemap.h>
@@ -117,7 +119,7 @@ static struct ctl_table xen_root[] = {
 #define EXTENT_ORDER (fls(XEN_PFN_PER_PAGE) - 1)
 
 /*
- * balloon_process() state:
+ * balloon_thread() state:
  *
  * BP_DONE: done or nothing to do,
  * BP_WAIT: wait to be rescheduled,
@@ -132,6 +134,8 @@ enum bp_state {
 	BP_ECANCELED
 };
 
+/* Main waiting point for xen-balloon thread. */
+static DECLARE_WAIT_QUEUE_HEAD(balloon_thread_wq);
 
 static DEFINE_MUTEX(balloon_mutex);
 
@@ -146,10 +150,6 @@ static xen_pfn_t frame_list[PAGE_SIZE / sizeof(xen_pfn_t)];
 static LIST_HEAD(ballooned_pages);
 static DECLARE_WAIT_QUEUE_HEAD(balloon_wq);
 
-/* Main work function, always executed in process context. */
-static void balloon_process(struct work_struct *work);
-static DECLARE_DELAYED_WORK(balloon_worker, balloon_process);
-
 /* When ballooning out (allocating memory to return to Xen) we don't really
    want the kernel to try too hard since that can trigger the oom killer. */
 #define GFP_BALLOON \
@@ -383,7 +383,7 @@ static void xen_online_page(struct page *page, unsigned int order)
 static int xen_memory_notifier(struct notifier_block *nb, unsigned long val, void *v)
 {
 	if (val == MEM_ONLINE)
-		schedule_delayed_work(&balloon_worker, 0);
+		wake_up(&balloon_thread_wq);
 
 	return NOTIFY_OK;
 }
@@ -508,18 +508,43 @@ static enum bp_state decrease_reservation(unsigned long nr_pages, gfp_t gfp)
 }
 
 /*
- * As this is a work item it is guaranteed to run as a single instance only.
+ * Stop waiting if either state is not BP_EAGAIN and ballooning action is
+ * needed, or if the credit has changed while state is BP_EAGAIN.
+ */
+static bool balloon_thread_cond(enum bp_state state, long credit)
+{
+	if (state != BP_EAGAIN)
+		credit = 0;
+
+	return current_credit() != credit || kthread_should_stop();
+}
+
+/*
+ * As this is a kthread it is guaranteed to run as a single instance only.
  * We may of course race updates of the target counts (which are protected
  * by the balloon lock), or with changes to the Xen hard limit, but we will
  * recover from these in time.
  */
-static void balloon_process(struct work_struct *work)
+static int balloon_thread(void *unused)
 {
 	enum bp_state state = BP_DONE;
 	long credit;
+	unsigned long timeout;
+
+	set_freezable();
+	for (;;) {
+		if (state == BP_EAGAIN)
+			timeout = balloon_stats.schedule_delay * HZ;
+		else
+			timeout = 3600 * HZ;
+		credit = current_credit();
 
+		wait_event_interruptible_timeout(balloon_thread_wq,
+				 balloon_thread_cond(state, credit), timeout);
+
+		if (kthread_should_stop())
+			return 0;
 
-	do {
 		mutex_lock(&balloon_mutex);
 
 		credit = current_credit();
@@ -546,12 +571,7 @@ static void balloon_process(struct work_struct *work)
 		mutex_unlock(&balloon_mutex);
 
 		cond_resched();
-
-	} while (credit && state == BP_DONE);
-
-	/* Schedule more work if there is some still to be done. */
-	if (state == BP_EAGAIN)
-		schedule_delayed_work(&balloon_worker, balloon_stats.schedule_delay * HZ);
+	}
 }
 
 /* Resets the Xen limit, sets new target, and kicks off processing. */
@@ -559,7 +579,7 @@ void balloon_set_new_target(unsigned long target)
 {
 	/* No need for lock. Not read-modify-write updates. */
 	balloon_stats.target_pages = target;
-	schedule_delayed_work(&balloon_worker, 0);
+	wake_up(&balloon_thread_wq);
 }
 EXPORT_SYMBOL_GPL(balloon_set_new_target);
 
@@ -664,7 +684,7 @@ void free_xenballooned_pages(int nr_pages, struct page **pages)
 
 	/* The balloon may be too large now. Shrink it if needed. */
 	if (current_credit())
-		schedule_delayed_work(&balloon_worker, 0);
+		wake_up(&balloon_thread_wq);
 
 	mutex_unlock(&balloon_mutex);
 }
@@ -696,6 +716,8 @@ static void __init balloon_add_region(unsigned long start_pfn,
 
 static int __init balloon_init(void)
 {
+	struct task_struct *task;
+
 	if (!xen_domain())
 		return -ENODEV;
 
@@ -739,6 +761,12 @@ static int __init balloon_init(void)
 	}
 #endif
 
+	task = kthread_run(balloon_thread, NULL, "xen-balloon");
+	if (IS_ERR(task)) {
+		pr_err("xen-balloon thread could not be started, ballooning will not work!\n");
+		return PTR_ERR(task);
+	}
+
 	/* Init the xen-balloon driver. */
 	xen_balloon_init();
 
-- 
2.33.0

[PATCH 5.4 52/68] nvme-multipath: fix ANA state updates when a namespace is not present

[Greg Kroah-Hartman]

From: Anton Eidelman <anton.eidelman@gmail.com>

[ Upstream commit 79f528afa93918519574773ea49a444c104bc1bd ]

nvme_update_ana_state() has a deficiency that results in a failure to
properly update the ana state for a namespace in the following case:

  NSIDs in ctrl->namespaces:	1, 3,    4
  NSIDs in desc->nsids:		1, 2, 3, 4

Loop iteration 0:
    ns index = 0, n = 0, ns->head->ns_id = 1, nsid = 1, MATCH.
Loop iteration 1:
    ns index = 1, n = 1, ns->head->ns_id = 3, nsid = 2, NO MATCH.
Loop iteration 2:
    ns index = 2, n = 2, ns->head->ns_id = 4, nsid = 4, MATCH.

Where the update to the ANA state of NSID 3 is missed.  To fix this
increment n and retry the update with the same ns when ns->head->ns_id is
higher than nsid,

Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/multipath.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index 590b040e90a3..016a67fd4198 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -522,14 +522,17 @@ static int nvme_update_ana_state(struct nvme_ctrl *ctrl,
 
 	down_read(&ctrl->namespaces_rwsem);
 	list_for_each_entry(ns, &ctrl->namespaces, list) {
-		unsigned nsid = le32_to_cpu(desc->nsids[n]);
-
+		unsigned nsid;
+again:
+		nsid = le32_to_cpu(desc->nsids[n]);
 		if (ns->head->ns_id < nsid)
 			continue;
 		if (ns->head->ns_id == nsid)
 			nvme_update_ns_ana_state(desc, ns);
 		if (++n == nr_nsids)
 			break;
+		if (ns->head->ns_id > nsid)
+			goto again;
 	}
 	up_read(&ctrl->namespaces_rwsem);
 	return 0;
-- 
2.33.0

[PATCH 5.4 53/68] sparc32: page align size in arch_dma_alloc

[Greg Kroah-Hartman]

From: Andreas Larsson <andreas@gaisler.com>

[ Upstream commit 59583f747664046aaae5588d56d5954fab66cce8 ]

Commit 53b7670e5735 ("sparc: factor the dma coherent mapping into
helper") lost the page align for the calls to dma_make_coherent and
srmmu_unmapiorange. The latter cannot handle a non page aligned len
argument.

Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sparc/kernel/ioport.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index f89603855f1e..b87e0002131d 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -356,7 +356,9 @@ err_nomem:
 void arch_dma_free(struct device *dev, size_t size, void *cpu_addr,
 		dma_addr_t dma_addr, unsigned long attrs)
 {
-	if (!sparc_dma_free_resource(cpu_addr, PAGE_ALIGN(size)))
+	size = PAGE_ALIGN(size);
+
+	if (!sparc_dma_free_resource(cpu_addr, size))
 		return;
 
 	dma_make_coherent(dma_addr, size);
-- 
2.33.0

[PATCH 5.4 54/68] blk-cgroup: fix UAF by grabbing blkcg lock before destroying blkg pd

[Greg Kroah-Hartman]

From: Li Jinlin <lijinlin3@huawei.com>

[ Upstream commit 858560b27645e7e97aca37ee8f232cccd658fbd2 ]

KASAN reports a use-after-free report when doing fuzz test:

[693354.104835] ==================================================================
[693354.105094] BUG: KASAN: use-after-free in bfq_io_set_weight_legacy+0xd3/0x160
[693354.105336] Read of size 4 at addr ffff888be0a35664 by task sh/1453338

[693354.105607] CPU: 41 PID: 1453338 Comm: sh Kdump: loaded Not tainted 4.18.0-147
[693354.105610] Hardware name: Huawei 2288H V5/BC11SPSCB0, BIOS 0.81 07/02/2018
[693354.105612] Call Trace:
[693354.105621]  dump_stack+0xf1/0x19b
[693354.105626]  ? show_regs_print_info+0x5/0x5
[693354.105634]  ? printk+0x9c/0xc3
[693354.105638]  ? cpumask_weight+0x1f/0x1f
[693354.105648]  print_address_description+0x70/0x360
[693354.105654]  kasan_report+0x1b2/0x330
[693354.105659]  ? bfq_io_set_weight_legacy+0xd3/0x160
[693354.105665]  ? bfq_io_set_weight_legacy+0xd3/0x160
[693354.105670]  bfq_io_set_weight_legacy+0xd3/0x160
[693354.105675]  ? bfq_cpd_init+0x20/0x20
[693354.105683]  cgroup_file_write+0x3aa/0x510
[693354.105693]  ? ___slab_alloc+0x507/0x540
[693354.105698]  ? cgroup_file_poll+0x60/0x60
[693354.105702]  ? 0xffffffff89600000
[693354.105708]  ? usercopy_abort+0x90/0x90
[693354.105716]  ? mutex_lock+0xef/0x180
[693354.105726]  kernfs_fop_write+0x1ab/0x280
[693354.105732]  ? cgroup_file_poll+0x60/0x60
[693354.105738]  vfs_write+0xe7/0x230
[693354.105744]  ksys_write+0xb0/0x140
[693354.105749]  ? __ia32_sys_read+0x50/0x50
[693354.105760]  do_syscall_64+0x112/0x370
[693354.105766]  ? syscall_return_slowpath+0x260/0x260
[693354.105772]  ? do_page_fault+0x9b/0x270
[693354.105779]  ? prepare_exit_to_usermode+0xf9/0x1a0
[693354.105784]  ? enter_from_user_mode+0x30/0x30
[693354.105793]  entry_SYSCALL_64_after_hwframe+0x65/0xca

[693354.105875] Allocated by task 1453337:
[693354.106001]  kasan_kmalloc+0xa0/0xd0
[693354.106006]  kmem_cache_alloc_node_trace+0x108/0x220
[693354.106010]  bfq_pd_alloc+0x96/0x120
[693354.106015]  blkcg_activate_policy+0x1b7/0x2b0
[693354.106020]  bfq_create_group_hierarchy+0x1e/0x80
[693354.106026]  bfq_init_queue+0x678/0x8c0
[693354.106031]  blk_mq_init_sched+0x1f8/0x460
[693354.106037]  elevator_switch_mq+0xe1/0x240
[693354.106041]  elevator_switch+0x25/0x40
[693354.106045]  elv_iosched_store+0x1a1/0x230
[693354.106049]  queue_attr_store+0x78/0xb0
[693354.106053]  kernfs_fop_write+0x1ab/0x280
[693354.106056]  vfs_write+0xe7/0x230
[693354.106060]  ksys_write+0xb0/0x140
[693354.106064]  do_syscall_64+0x112/0x370
[693354.106069]  entry_SYSCALL_64_after_hwframe+0x65/0xca

[693354.106114] Freed by task 1453336:
[693354.106225]  __kasan_slab_free+0x130/0x180
[693354.106229]  kfree+0x90/0x1b0
[693354.106233]  blkcg_deactivate_policy+0x12c/0x220
[693354.106238]  bfq_exit_queue+0xf5/0x110
[693354.106241]  blk_mq_exit_sched+0x104/0x130
[693354.106245]  __elevator_exit+0x45/0x60
[693354.106249]  elevator_switch_mq+0xd6/0x240
[693354.106253]  elevator_switch+0x25/0x40
[693354.106257]  elv_iosched_store+0x1a1/0x230
[693354.106261]  queue_attr_store+0x78/0xb0
[693354.106264]  kernfs_fop_write+0x1ab/0x280
[693354.106268]  vfs_write+0xe7/0x230
[693354.106271]  ksys_write+0xb0/0x140
[693354.106275]  do_syscall_64+0x112/0x370
[693354.106280]  entry_SYSCALL_64_after_hwframe+0x65/0xca

[693354.106329] The buggy address belongs to the object at ffff888be0a35580
                 which belongs to the cache kmalloc-1k of size 1024
[693354.106736] The buggy address is located 228 bytes inside of
                 1024-byte region [ffff888be0a35580, ffff888be0a35980)
[693354.107114] The buggy address belongs to the page:
[693354.107273] page:ffffea002f828c00 count:1 mapcount:0 mapping:ffff888107c17080 index:0x0 compound_mapcount: 0
[693354.107606] flags: 0x17ffffc0008100(slab|head)
[693354.107760] raw: 0017ffffc0008100 ffffea002fcbc808 ffffea0030bd3a08 ffff888107c17080
[693354.108020] raw: 0000000000000000 00000000001c001c 00000001ffffffff 0000000000000000
[693354.108278] page dumped because: kasan: bad access detected

[693354.108511] Memory state around the buggy address:
[693354.108671]  ffff888be0a35500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[693354.116396]  ffff888be0a35580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[693354.124473] >ffff888be0a35600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[693354.132421]                                                        ^
[693354.140284]  ffff888be0a35680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[693354.147912]  ffff888be0a35700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[693354.155281] ==================================================================

blkgs are protected by both queue and blkcg locks and holding
either should stabilize them. However, the path of destroying
blkg policy data is only protected by queue lock in
blkcg_activate_policy()/blkcg_deactivate_policy(). Other tasks
can get the blkg policy data before the blkg policy data is
destroyed, and use it after destroyed, which will result in a
use-after-free.

CPU0                             CPU1
blkcg_deactivate_policy
  spin_lock_irq(&q->queue_lock)
                                 bfq_io_set_weight_legacy
                                   spin_lock_irq(&blkcg->lock)
                                   blkg_to_bfqg(blkg)
                                     pd_to_bfqg(blkg->pd[pol->plid])
                                     ^^^^^^blkg->pd[pol->plid] != NULL
                                           bfqg != NULL
  pol->pd_free_fn(blkg->pd[pol->plid])
    pd_to_bfqg(blkg->pd[pol->plid])
    bfqg_put(bfqg)
      kfree(bfqg)
  blkg->pd[pol->plid] = NULL
  spin_unlock_irq(q->queue_lock);
                                   bfq_group_set_weight(bfqg, val, 0)
                                     bfqg->entity.new_weight
                                     ^^^^^^trigger uaf here
                                   spin_unlock_irq(&blkcg->lock);

Fix by grabbing the matching blkcg lock before trying to
destroy blkg policy data.

Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Li Jinlin <lijinlin3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20210914042605.3260596-1-lijinlin3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-cgroup.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
index cb3d44d20005..dde8d0acfb34 100644
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -1462,10 +1462,14 @@ enomem:
 	/* alloc failed, nothing's initialized yet, free everything */
 	spin_lock_irq(&q->queue_lock);
 	list_for_each_entry(blkg, &q->blkg_list, q_node) {
+		struct blkcg *blkcg = blkg->blkcg;
+
+		spin_lock(&blkcg->lock);
 		if (blkg->pd[pol->plid]) {
 			pol->pd_free_fn(blkg->pd[pol->plid]);
 			blkg->pd[pol->plid] = NULL;
 		}
+		spin_unlock(&blkcg->lock);
 	}
 	spin_unlock_irq(&q->queue_lock);
 	ret = -ENOMEM;
@@ -1497,12 +1501,16 @@ void blkcg_deactivate_policy(struct request_queue *q,
 	__clear_bit(pol->plid, q->blkcg_pols);
 
 	list_for_each_entry(blkg, &q->blkg_list, q_node) {
+		struct blkcg *blkcg = blkg->blkcg;
+
+		spin_lock(&blkcg->lock);
 		if (blkg->pd[pol->plid]) {
 			if (pol->pd_offline_fn)
 				pol->pd_offline_fn(blkg->pd[pol->plid]);
 			pol->pd_free_fn(blkg->pd[pol->plid]);
 			blkg->pd[pol->plid] = NULL;
 		}
+		spin_unlock(&blkcg->lock);
 	}
 
 	spin_unlock_irq(&q->queue_lock);
-- 
2.33.0

[PATCH 5.4 55/68] compiler.h: Introduce absolute_pointer macro

[Greg Kroah-Hartman]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit f6b5f1a56987de837f8e25cd560847106b8632a8 ]

absolute_pointer() disassociates a pointer from its originating symbol
type and context. Use it to prevent compiler warnings/errors such as

  drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe':
  arch/m68k/include/asm/string.h:72:25: error:
	'__builtin_memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread]

Such warnings may be reported by gcc 11.x for string and memory
operations on fixed addresses.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/compiler.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/compiler.h b/include/linux/compiler.h
index 9446e8fbe55c..bce983406aaf 100644
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -233,6 +233,8 @@ void ftrace_likely_update(struct ftrace_likely_data *f, int val,
     (typeof(ptr)) (__ptr + (off)); })
 #endif
 
+#define absolute_pointer(val)	RELOC_HIDE((void *)(val), 0)
+
 #ifndef OPTIMIZER_HIDE_VAR
 /* Make the optimizer believe the variable can be manipulated arbitrarily. */
 #define OPTIMIZER_HIDE_VAR(var)						\
-- 
2.33.0

[PATCH 5.4 56/68] net: i825xx: Use absolute_pointer for memcpy from fixed memory location

[Greg Kroah-Hartman]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit dff2d13114f0beec448da9b3716204eb34b0cf41 ]

gcc 11.x reports the following compiler warning/error.

  drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe':
  arch/m68k/include/asm/string.h:72:25: error:
	'__builtin_memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread]

Use absolute_pointer() to work around the problem.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/i825xx/82596.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/i825xx/82596.c b/drivers/net/ethernet/i825xx/82596.c
index 92929750f832..54d5b402b0e8 100644
--- a/drivers/net/ethernet/i825xx/82596.c
+++ b/drivers/net/ethernet/i825xx/82596.c
@@ -1155,7 +1155,7 @@ struct net_device * __init i82596_probe(int unit)
 			err = -ENODEV;
 			goto out;
 		}
-		memcpy(eth_addr, (void *) 0xfffc1f2c, ETH_ALEN);	/* YUCK! Get addr from NOVRAM */
+		memcpy(eth_addr, absolute_pointer(0xfffc1f2c), ETH_ALEN); /* YUCK! Get addr from NOVRAM */
 		dev->base_addr = MVME_I596_BASE;
 		dev->irq = (unsigned) MVME16x_IRQ_I596;
 		goto found;
-- 
2.33.0

[PATCH 5.4 57/68] sparc: avoid stringop-overread errors

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

[ Upstream commit fc7c028dcdbfe981bca75d2a7b95f363eb691ef3 ]

The sparc mdesc code does pointer games with 'struct mdesc_hdr', but
didn't describe to the compiler how that header is then followed by the
data that the header describes.

As a result, gcc is now unhappy since it does stricter pointer range
tracking, and doesn't understand about how these things work.  This
results in various errors like:

    arch/sparc/kernel/mdesc.c: In function ‘mdesc_node_by_name’:
    arch/sparc/kernel/mdesc.c:647:22: error: ‘strcmp’ reading 1 or more bytes from a region of size 0 [-Werror=stringop-overread]
      647 |                 if (!strcmp(names + ep[ret].name_offset, name))
          |                      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

which are easily avoided by just describing 'struct mdesc_hdr' better,
and making the node_block() helper function look into that unsized
data[] that follows the header.

This makes the sparc64 build happy again at least for my cross-compiler
version (gcc version 11.2.1).

Link: https://lore.kernel.org/lkml/CAHk-=wi4NW3NC0xWykkw=6LnjQD6D_rtRtxY9g8gQAJXtQMi8A@mail.gmail.com/
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sparc/kernel/mdesc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/sparc/kernel/mdesc.c b/arch/sparc/kernel/mdesc.c
index 8e645ddac58e..30f171b7b00c 100644
--- a/arch/sparc/kernel/mdesc.c
+++ b/arch/sparc/kernel/mdesc.c
@@ -39,6 +39,7 @@ struct mdesc_hdr {
 	u32	node_sz; /* node block size */
 	u32	name_sz; /* name block size */
 	u32	data_sz; /* data block size */
+	char	data[];
 } __attribute__((aligned(16)));
 
 struct mdesc_elem {
@@ -612,7 +613,7 @@ EXPORT_SYMBOL(mdesc_get_node_info);
 
 static struct mdesc_elem *node_block(struct mdesc_hdr *mdesc)
 {
-	return (struct mdesc_elem *) (mdesc + 1);
+	return (struct mdesc_elem *) mdesc->data;
 }
 
 static void *name_block(struct mdesc_hdr *mdesc)
-- 
2.33.0

[PATCH 5.4 58/68] qnx4: avoid stringop-overread errors

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

[ Upstream commit b7213ffa0e585feb1aee3e7173e965e66ee0abaa ]

The qnx4 directory entries are 64-byte blocks that have different
contents depending on the a status byte that is in the last byte of the
block.

In particular, a directory entry can be either a "link info" entry with
a 48-byte name and pointers to the real inode information, or an "inode
entry" with a smaller 16-byte name and the full inode information.

But the code was written to always just treat the directory name as if
it was part of that "inode entry", and just extend the name to the
longer case if the status byte said it was a link entry.

That work just fine and gives the right results, but now that gcc is
tracking data structure accesses much more, the code can trigger a
compiler error about using up to 48 bytes (the long name) in a structure
that only has that shorter name in it:

   fs/qnx4/dir.c: In function ‘qnx4_readdir’:
   fs/qnx4/dir.c:51:32: error: ‘strnlen’ specified bound 48 exceeds source size 16 [-Werror=stringop-overread]
      51 |                         size = strnlen(de->di_fname, size);
         |                                ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   In file included from fs/qnx4/qnx4.h:3,
                    from fs/qnx4/dir.c:16:
   include/uapi/linux/qnx4_fs.h:45:25: note: source object declared here
      45 |         char            di_fname[QNX4_SHORT_NAME_MAX];
         |                         ^~~~~~~~

which is because the source code doesn't really make this whole "one of
two different types" explicit.

Fix this by introducing a very explicit union of the two types, and
basically explaining to the compiler what is really going on.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/qnx4/dir.c | 51 ++++++++++++++++++++++++++++++++++-----------------
 1 file changed, 34 insertions(+), 17 deletions(-)

diff --git a/fs/qnx4/dir.c b/fs/qnx4/dir.c
index a6ee23aadd28..2a66844b7ff8 100644
--- a/fs/qnx4/dir.c
+++ b/fs/qnx4/dir.c
@@ -15,13 +15,27 @@
 #include <linux/buffer_head.h>
 #include "qnx4.h"
 
+/*
+ * A qnx4 directory entry is an inode entry or link info
+ * depending on the status field in the last byte. The
+ * first byte is where the name start either way, and a
+ * zero means it's empty.
+ */
+union qnx4_directory_entry {
+	struct {
+		char de_name;
+		char de_pad[62];
+		char de_status;
+	};
+	struct qnx4_inode_entry inode;
+	struct qnx4_link_info link;
+};
+
 static int qnx4_readdir(struct file *file, struct dir_context *ctx)
 {
 	struct inode *inode = file_inode(file);
 	unsigned int offset;
 	struct buffer_head *bh;
-	struct qnx4_inode_entry *de;
-	struct qnx4_link_info *le;
 	unsigned long blknum;
 	int ix, ino;
 	int size;
@@ -38,27 +52,30 @@ static int qnx4_readdir(struct file *file, struct dir_context *ctx)
 		}
 		ix = (ctx->pos >> QNX4_DIR_ENTRY_SIZE_BITS) % QNX4_INODES_PER_BLOCK;
 		for (; ix < QNX4_INODES_PER_BLOCK; ix++, ctx->pos += QNX4_DIR_ENTRY_SIZE) {
+			union qnx4_directory_entry *de;
+			const char *name;
+
 			offset = ix * QNX4_DIR_ENTRY_SIZE;
-			de = (struct qnx4_inode_entry *) (bh->b_data + offset);
-			if (!de->di_fname[0])
+			de = (union qnx4_directory_entry *) (bh->b_data + offset);
+
+			if (!de->de_name)
 				continue;
-			if (!(de->di_status & (QNX4_FILE_USED|QNX4_FILE_LINK)))
+			if (!(de->de_status & (QNX4_FILE_USED|QNX4_FILE_LINK)))
 				continue;
-			if (!(de->di_status & QNX4_FILE_LINK))
-				size = QNX4_SHORT_NAME_MAX;
-			else
-				size = QNX4_NAME_MAX;
-			size = strnlen(de->di_fname, size);
-			QNX4DEBUG((KERN_INFO "qnx4_readdir:%.*s\n", size, de->di_fname));
-			if (!(de->di_status & QNX4_FILE_LINK))
+			if (!(de->de_status & QNX4_FILE_LINK)) {
+				size = sizeof(de->inode.di_fname);
+				name = de->inode.di_fname;
 				ino = blknum * QNX4_INODES_PER_BLOCK + ix - 1;
-			else {
-				le  = (struct qnx4_link_info*)de;
-				ino = ( le32_to_cpu(le->dl_inode_blk) - 1 ) *
+			} else {
+				size = sizeof(de->link.dl_fname);
+				name = de->link.dl_fname;
+				ino = ( le32_to_cpu(de->link.dl_inode_blk) - 1 ) *
 					QNX4_INODES_PER_BLOCK +
-					le->dl_inode_ndx;
+					de->link.dl_inode_ndx;
 			}
-			if (!dir_emit(ctx, de->di_fname, size, ino, DT_UNKNOWN)) {
+			size = strnlen(name, size);
+			QNX4DEBUG((KERN_INFO "qnx4_readdir:%.*s\n", size, name));
+			if (!dir_emit(ctx, name, size, ino, DT_UNKNOWN)) {
 				brelse(bh);
 				return 0;
 			}
-- 
2.33.0

[PATCH 5.4 59/68] parisc: Use absolute_pointer() to define PAGE0

[Greg Kroah-Hartman]

From: Helge Deller <deller@gmx.de>

[ Upstream commit 90cc7bed1ed19f869ae7221a6b41887fe762a6a3 ]

Use absolute_pointer() wrapper for PAGE0 to avoid this compiler warning:

  arch/parisc/kernel/setup.c: In function 'start_parisc':
  error: '__builtin_memcmp_eq' specified bound 8 exceeds source size 0

Signed-off-by: Helge Deller <deller@gmx.de>
Co-Developed-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/parisc/include/asm/page.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/parisc/include/asm/page.h b/arch/parisc/include/asm/page.h
index 93caf17ac5e2..9ebf3b0413d5 100644
--- a/arch/parisc/include/asm/page.h
+++ b/arch/parisc/include/asm/page.h
@@ -181,7 +181,7 @@ extern int npmem_ranges;
 #include <asm-generic/getorder.h>
 #include <asm/pdc.h>
 
-#define PAGE0   ((struct zeropage *)__PAGE_OFFSET)
+#define PAGE0   ((struct zeropage *)absolute_pointer(__PAGE_OFFSET))
 
 /* DEFINITION OF THE ZERO-PAGE (PAG0) */
 /* based on work by Jason Eckhardt (jason@equator.com) */
-- 
2.33.0

[PATCH 5.4 60/68] arm64: Mark __stack_chk_guard as __ro_after_init

[Greg Kroah-Hartman]

From: Dan Li <ashimida@linux.alibaba.com>

[ Upstream commit 9fcb2e93f41c07a400885325e7dbdfceba6efaec ]

__stack_chk_guard is setup once while init stage and never changed
after that.

Although the modification of this variable at runtime will usually
cause the kernel to crash (so does the attacker), it should be marked
as __ro_after_init, and it should not affect performance if it is
placed in the ro_after_init section.

Signed-off-by: Dan Li <ashimida@linux.alibaba.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1631612642-102881-1-git-send-email-ashimida@linux.alibaba.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/process.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index 7d7cfa128b71..f61ef46ebff7 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -56,7 +56,7 @@
 
 #if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_STACKPROTECTOR_PER_TASK)
 #include <linux/stackprotector.h>
-unsigned long __stack_chk_guard __read_mostly;
+unsigned long __stack_chk_guard __ro_after_init;
 EXPORT_SYMBOL(__stack_chk_guard);
 #endif
 
-- 
2.33.0

[PATCH 5.4 61/68] alpha: Declare virt_to_phys and virt_to_bus parameter as pointer to volatile

[Greg Kroah-Hartman]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit 35a3f4ef0ab543daa1725b0c963eb8c05e3376f8 ]

Some drivers pass a pointer to volatile data to virt_to_bus() and
virt_to_phys(), and that works fine.  One exception is alpha.  This
results in a number of compile errors such as

  drivers/net/wan/lmc/lmc_main.c: In function 'lmc_softreset':
  drivers/net/wan/lmc/lmc_main.c:1782:50: error:
	passing argument 1 of 'virt_to_bus' discards 'volatile'
	qualifier from pointer target type

  drivers/atm/ambassador.c: In function 'do_loader_command':
  drivers/atm/ambassador.c:1747:58: error:
	passing argument 1 of 'virt_to_bus' discards 'volatile'
	qualifier from pointer target type

Declare the parameter of virt_to_phys and virt_to_bus as pointer to
volatile to fix the problem.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/alpha/include/asm/io.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/alpha/include/asm/io.h b/arch/alpha/include/asm/io.h
index 103270d5a9fc..66a384a4ddba 100644
--- a/arch/alpha/include/asm/io.h
+++ b/arch/alpha/include/asm/io.h
@@ -61,7 +61,7 @@ extern inline void set_hae(unsigned long new_hae)
  * Change virtual addresses to physical addresses and vv.
  */
 #ifdef USE_48_BIT_KSEG
-static inline unsigned long virt_to_phys(void *address)
+static inline unsigned long virt_to_phys(volatile void *address)
 {
 	return (unsigned long)address - IDENT_ADDR;
 }
@@ -71,7 +71,7 @@ static inline void * phys_to_virt(unsigned long address)
 	return (void *) (address + IDENT_ADDR);
 }
 #else
-static inline unsigned long virt_to_phys(void *address)
+static inline unsigned long virt_to_phys(volatile void *address)
 {
         unsigned long phys = (unsigned long)address;
 
@@ -107,7 +107,7 @@ static inline void * phys_to_virt(unsigned long address)
 extern unsigned long __direct_map_base;
 extern unsigned long __direct_map_size;
 
-static inline unsigned long __deprecated virt_to_bus(void *address)
+static inline unsigned long __deprecated virt_to_bus(volatile void *address)
 {
 	unsigned long phys = virt_to_phys(address);
 	unsigned long bus = phys + __direct_map_base;
-- 
2.33.0

[PATCH 5.4 62/68] net: 6pack: Fix tx timeout and slot time

[Greg Kroah-Hartman]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit 3c0d2a46c0141913dc6fd126c57d0615677d946e ]

tx timeout and slot time are currently specified in units of HZ.  On
Alpha, HZ is defined as 1024.  When building alpha:allmodconfig, this
results in the following error message.

  drivers/net/hamradio/6pack.c: In function 'sixpack_open':
  drivers/net/hamradio/6pack.c:71:41: error:
  	unsigned conversion from 'int' to 'unsigned char'
  	changes value from '256' to '0'

In the 6PACK protocol, tx timeout is specified in units of 10 ms and
transmitted over the wire:

    https://www.linux-ax25.org/wiki/6PACK

Defining a value dependent on HZ doesn't really make sense, and
presumably comes from the (very historical) situation where HZ was
originally 100.

Note that the SIXP_SLOTTIME use explicitly is about 10ms granularity:

        mod_timer(&sp->tx_t, jiffies + ((when + 1) * HZ) / 100);

and the SIXP_TXDELAY walue is sent as a byte over the wire.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/hamradio/6pack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c
index da13683d52d1..bd0beb16d68a 100644
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -68,9 +68,9 @@
 #define SIXP_DAMA_OFF		0
 
 /* default level 2 parameters */
-#define SIXP_TXDELAY			(HZ/4)	/* in 1 s */
+#define SIXP_TXDELAY			25	/* 250 ms */
 #define SIXP_PERSIST			50	/* in 256ths */
-#define SIXP_SLOTTIME			(HZ/10)	/* in 1 s */
+#define SIXP_SLOTTIME			10	/* 100 ms */
 #define SIXP_INIT_RESYNC_TIMEOUT	(3*HZ/2) /* in 1 s */
 #define SIXP_RESYNC_TIMEOUT		5*HZ	/* in 1 s */
 
-- 
2.33.0

[PATCH 5.4 63/68] spi: Fix tegra20 build with CONFIG_PM=n

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

[ Upstream commit efafec27c5658ed987e720130772f8933c685e87 ]

Without CONFIG_PM enabled, the SET_RUNTIME_PM_OPS() macro ends up being
empty, and the only use of tegra_slink_runtime_{resume,suspend} goes
away, resulting in

  drivers/spi/spi-tegra20-slink.c:1200:12: error: ‘tegra_slink_runtime_resume’ defined but not used [-Werror=unused-function]
   1200 | static int tegra_slink_runtime_resume(struct device *dev)
        |            ^~~~~~~~~~~~~~~~~~~~~~~~~~
  drivers/spi/spi-tegra20-slink.c:1188:12: error: ‘tegra_slink_runtime_suspend’ defined but not used [-Werror=unused-function]
   1188 | static int tegra_slink_runtime_suspend(struct device *dev)
        |            ^~~~~~~~~~~~~~~~~~~~~~~~~~~

mark the functions __maybe_unused to make the build happy.

This hits the alpha allmodconfig build (and others).

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-tegra20-slink.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c
index 2a1905c43a0b..9b59539c8735 100644
--- a/drivers/spi/spi-tegra20-slink.c
+++ b/drivers/spi/spi-tegra20-slink.c
@@ -1205,7 +1205,7 @@ static int tegra_slink_resume(struct device *dev)
 }
 #endif
 
-static int tegra_slink_runtime_suspend(struct device *dev)
+static int __maybe_unused tegra_slink_runtime_suspend(struct device *dev)
 {
 	struct spi_master *master = dev_get_drvdata(dev);
 	struct tegra_slink_data *tspi = spi_master_get_devdata(master);
@@ -1217,7 +1217,7 @@ static int tegra_slink_runtime_suspend(struct device *dev)
 	return 0;
 }
 
-static int tegra_slink_runtime_resume(struct device *dev)
+static int __maybe_unused tegra_slink_runtime_resume(struct device *dev)
 {
 	struct spi_master *master = dev_get_drvdata(dev);
 	struct tegra_slink_data *tspi = spi_master_get_devdata(master);
-- 
2.33.0

[PATCH 5.4 64/68] EDAC/synopsys: Fix wrong value type assignment for edac_mode

[Greg Kroah-Hartman]

From: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>

commit 5297cfa6bdf93e3889f78f9b482e2a595a376083 upstream.

dimm->edac_mode contains values of type enum edac_type - not the
corresponding capability flags. Fix that.

Issue caught by Coverity check "enumerated type mixed with another
type."

 [ bp: Rewrite commit message, add tags. ]

Fixes: ae9b56e3996d ("EDAC, synps: Add EDAC support for zynq ddr ecc controller")
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20210818072315.15149-1-shubhrajyoti.datta@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/edac/synopsys_edac.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -782,7 +782,7 @@ static void init_csrows(struct mem_ctl_i
 
 		for (j = 0; j < csi->nr_channels; j++) {
 			dimm		= csi->channels[j]->dimm;
-			dimm->edac_mode	= EDAC_FLAG_SECDED;
+			dimm->edac_mode	= EDAC_SECDED;
 			dimm->mtype	= p_data->get_mtype(priv->baseaddr);
 			dimm->nr_pages	= (size >> PAGE_SHIFT) / csi->nr_channels;
 			dimm->grain	= SYNPS_EDAC_ERR_GRAIN;

[PATCH 5.4 65/68] thermal/drivers/int340x: Do not set a wrong tcc offset on resume

[Greg Kroah-Hartman]

From: Antoine Tenart <atenart@kernel.org>

commit 8b4bd256674720709a9d858a219fcac6f2f253b5 upstream.

After upgrading to Linux 5.13.3 I noticed my laptop would shutdown due
to overheat (when it should not). It turned out this was due to commit
fe6a6de6692e ("thermal/drivers/int340x/processor_thermal: Fix tcc setting").

What happens is this drivers uses a global variable to keep track of the
tcc offset (tcc_offset_save) and uses it on resume. The issue is this
variable is initialized to 0, but is only set in
tcc_offset_degree_celsius_store, i.e. when the tcc offset is explicitly
set by userspace. If that does not happen, the resume path will set the
offset to 0 (in my case the h/w default being 3, the offset would become
too low after a suspend/resume cycle).

The issue did not arise before commit fe6a6de6692e, as the function
setting the offset would return if the offset was 0. This is no longer
the case (rightfully).

Fix this by not applying the offset if it wasn't saved before, reverting
back to the old logic. A better approach will come later, but this will
be easier to apply to stable kernels.

The logic to restore the offset after a resume was there long before
commit fe6a6de6692e, but as a value of 0 was considered invalid I'm
referencing the commit that made the issue possible in the Fixes tag
instead.

Fixes: fe6a6de6692e ("thermal/drivers/int340x/processor_thermal: Fix tcc setting")
Cc: stable@vger.kernel.org
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pI andruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20210909085613.5577-2-atenart@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/thermal/intel/int340x_thermal/processor_thermal_device.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
@@ -179,7 +179,7 @@ static int tcc_offset_update(unsigned in
 	return 0;
 }
 
-static unsigned int tcc_offset_save;
+static int tcc_offset_save = -1;
 
 static ssize_t tcc_offset_degree_celsius_store(struct device *dev,
 				struct device_attribute *attr, const char *buf,
@@ -703,7 +703,8 @@ static int proc_thermal_resume(struct de
 	proc_dev = dev_get_drvdata(dev);
 	proc_thermal_read_ppcc(proc_dev);
 
-	tcc_offset_update(tcc_offset_save);
+	if (tcc_offset_save >= 0)
+		tcc_offset_update(tcc_offset_save);
 
 	return 0;
 }

[PATCH 5.4 66/68] arm64: dts: marvell: armada-37xx: Extend PCIe MEM space

[Greg Kroah-Hartman]

From: Pali Rohár <pali@kernel.org>

commit 514ef1e62d6521c2199d192b1c71b79d2aa21d5a upstream.

Current PCIe MEM space of size 16 MB is not enough for some combination
of PCIe cards (e.g. NVMe disk together with ath11k wifi card). ARM Trusted
Firmware for Armada 3700 platform already assigns 128 MB for PCIe window,
so extend PCIe MEM space to the end of 128 MB PCIe window which allows to
allocate more PCIe BARs for more PCIe cards.

Without this change some combination of PCIe cards cannot be used and
kernel show error messages in dmesg during initialization:

    pci 0000:00:00.0: BAR 8: no space for [mem size 0x01800000]
    pci 0000:00:00.0: BAR 8: failed to assign [mem size 0x01800000]
    pci 0000:00:00.0: BAR 6: assigned [mem 0xe8000000-0xe80007ff pref]
    pci 0000:01:00.0: BAR 8: no space for [mem size 0x01800000]
    pci 0000:01:00.0: BAR 8: failed to assign [mem size 0x01800000]
    pci 0000:02:03.0: BAR 8: no space for [mem size 0x01000000]
    pci 0000:02:03.0: BAR 8: failed to assign [mem size 0x01000000]
    pci 0000:02:07.0: BAR 8: no space for [mem size 0x00100000]
    pci 0000:02:07.0: BAR 8: failed to assign [mem size 0x00100000]
    pci 0000:03:00.0: BAR 0: no space for [mem size 0x01000000 64bit]
    pci 0000:03:00.0: BAR 0: failed to assign [mem size 0x01000000 64bit]

Due to bugs in U-Boot port for Turris Mox, the second range in Turris Mox
kernel DTS file for PCIe must start at 16 MB offset. Otherwise U-Boot
crashes during loading of kernel DTB file. This bug is present only in
U-Boot code for Turris Mox and therefore other Armada 3700 devices are not
affected by this bug. Bug is fixed in U-Boot version 2021.07.

To not break booting new kernels on existing versions of U-Boot on Turris
Mox, use first 16 MB range for IO and second range with rest of PCIe window
for MEM.

Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 76f6386b25cc ("arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts |   17 +++++++++++++++++
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi           |   11 +++++++++--
 2 files changed, 26 insertions(+), 2 deletions(-)

--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -138,6 +138,23 @@
 	max-link-speed = <2>;
 	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
 	phys = <&comphy1 0>;
+	/*
+	 * U-Boot port for Turris Mox has a bug which always expects that "ranges" DT property
+	 * contains exactly 2 ranges with 3 (child) address cells, 2 (parent) address cells and
+	 * 2 size cells and also expects that the second range starts at 16 MB offset. If these
+	 * conditions are not met then U-Boot crashes during loading kernel DTB file. PCIe address
+	 * space is 128 MB long, so the best split between MEM and IO is to use fixed 16 MB window
+	 * for IO and the rest 112 MB (64+32+16) for MEM, despite that maximal IO size is just 64 kB.
+	 * This bug is not present in U-Boot ports for other Armada 3700 devices and is fixed in
+	 * U-Boot version 2021.07. See relevant U-Boot commits (the last one contains fix):
+	 * https://source.denx.de/u-boot/u-boot/-/commit/cb2ddb291ee6fcbddd6d8f4ff49089dfe580f5d7
+	 * https://source.denx.de/u-boot/u-boot/-/commit/c64ac3b3185aeb3846297ad7391fc6df8ecd73bf
+	 * https://source.denx.de/u-boot/u-boot/-/commit/4a82fca8e330157081fc132a591ebd99ba02ee33
+	 */
+	#address-cells = <3>;
+	#size-cells = <2>;
+	ranges = <0x81000000 0 0xe8000000   0 0xe8000000   0 0x01000000   /* Port 0 IO */
+		  0x82000000 0 0xe9000000   0 0xe9000000   0 0x07000000>; /* Port 0 MEM */
 
 	/* enabled by U-Boot if PCIe module is present */
 	status = "disabled";
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -487,8 +487,15 @@
 			#interrupt-cells = <1>;
 			msi-parent = <&pcie0>;
 			msi-controller;
-			ranges = <0x82000000 0 0xe8000000   0 0xe8000000 0 0x1000000 /* Port 0 MEM */
-				  0x81000000 0 0xe9000000   0 0xe9000000 0 0x10000>; /* Port 0 IO*/
+			/*
+			 * The 128 MiB address range [0xe8000000-0xf0000000] is
+			 * dedicated for PCIe and can be assigned to 8 windows
+			 * with size a power of two. Use one 64 KiB window for
+			 * IO at the end and the remaining seven windows
+			 * (totaling 127 MiB) for MEM.
+			 */
+			ranges = <0x82000000 0 0xe8000000   0 0xe8000000   0 0x07f00000   /* Port 0 MEM */
+				  0x81000000 0 0xefff0000   0 0xefff0000   0 0x00010000>; /* Port 0 IO */
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc 0>,
 					<0 0 0 2 &pcie_intc 1>,

[PATCH 5.4 67/68] xen/balloon: fix balloon kthread freezing

[Greg Kroah-Hartman]

From: Juergen Gross <jgross@suse.com>

commit 96f5bd03e1be606987644b71899ea56a8d05f825 upstream.

Commit 8480ed9c2bbd56 ("xen/balloon: use a kernel thread instead a
workqueue") switched the Xen balloon driver to use a kernel thread.
Unfortunately the patch omitted to call try_to_freeze() or to use
wait_event_freezable_timeout(), causing a system suspend to fail.

Fixes: 8480ed9c2bbd56 ("xen/balloon: use a kernel thread instead a workqueue")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210920100345.21939-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/xen/balloon.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -539,8 +539,8 @@ static int balloon_thread(void *unused)
 			timeout = 3600 * HZ;
 		credit = current_credit();
 
-		wait_event_interruptible_timeout(balloon_thread_wq,
-				 balloon_thread_cond(state, credit), timeout);
+		wait_event_freezable_timeout(balloon_thread_wq,
+			balloon_thread_cond(state, credit), timeout);
 
 		if (kthread_should_stop())
 			return 0;

[PATCH 5.4 68/68] qnx4: work around gcc false positive warning bug

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

commit d5f6545934c47e97c0b48a645418e877b452a992 upstream.

In commit b7213ffa0e58 ("qnx4: avoid stringop-overread errors") I tried
to teach gcc about how the directory entry structure can be two
different things depending on a status flag.  It made the code clearer,
and it seemed to make gcc happy.

However, Arnd points to a gcc bug, where despite using two different
members of a union, gcc then gets confused, and uses the size of one of
the members to decide if a string overrun happens.  And not necessarily
the rigth one.

End result: with some configurations, gcc-11 will still complain about
the source buffer size being overread:

  fs/qnx4/dir.c: In function 'qnx4_readdir':
  fs/qnx4/dir.c:76:32: error: 'strnlen' specified bound [16, 48] exceeds source size 1 [-Werror=stringop-overread]
     76 |                         size = strnlen(name, size);
        |                                ^~~~~~~~~~~~~~~~~~~
  fs/qnx4/dir.c:26:22: note: source object declared here
     26 |                 char de_name;
        |                      ^~~~~~~

because gcc will get confused about which union member entry is actually
getting accessed, even when the source code is very clear about it.  Gcc
internally will have combined two "redundant" pointers (pointing to
different union elements that are at the same offset), and takes the
size checking from one or the other - not necessarily the right one.

This is clearly a gcc bug, but we can work around it fairly easily.  The
biggest thing here is the big honking comment about why we do what we
do.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578#c6
Reported-and-tested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/qnx4/dir.c |   36 +++++++++++++++++++++++++++---------
 1 file changed, 27 insertions(+), 9 deletions(-)

--- a/fs/qnx4/dir.c
+++ b/fs/qnx4/dir.c
@@ -20,12 +20,33 @@
  * depending on the status field in the last byte. The
  * first byte is where the name start either way, and a
  * zero means it's empty.
+ *
+ * Also, due to a bug in gcc, we don't want to use the
+ * real (differently sized) name arrays in the inode and
+ * link entries, but always the 'de_name[]' one in the
+ * fake struct entry.
+ *
+ * See
+ *
+ *   https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578#c6
+ *
+ * for details, but basically gcc will take the size of the
+ * 'name' array from one of the used union entries randomly.
+ *
+ * This use of 'de_name[]' (48 bytes) avoids the false positive
+ * warnings that would happen if gcc decides to use 'inode.di_name'
+ * (16 bytes) even when the pointer and size were to come from
+ * 'link.dl_name' (48 bytes).
+ *
+ * In all cases the actual name pointer itself is the same, it's
+ * only the gcc internal 'what is the size of this field' logic
+ * that can get confused.
  */
 union qnx4_directory_entry {
 	struct {
-		char de_name;
-		char de_pad[62];
-		char de_status;
+		const char de_name[48];
+		u8 de_pad[15];
+		u8 de_status;
 	};
 	struct qnx4_inode_entry inode;
 	struct qnx4_link_info link;
@@ -53,29 +74,26 @@ static int qnx4_readdir(struct file *fil
 		ix = (ctx->pos >> QNX4_DIR_ENTRY_SIZE_BITS) % QNX4_INODES_PER_BLOCK;
 		for (; ix < QNX4_INODES_PER_BLOCK; ix++, ctx->pos += QNX4_DIR_ENTRY_SIZE) {
 			union qnx4_directory_entry *de;
-			const char *name;
 
 			offset = ix * QNX4_DIR_ENTRY_SIZE;
 			de = (union qnx4_directory_entry *) (bh->b_data + offset);
 
-			if (!de->de_name)
+			if (!de->de_name[0])
 				continue;
 			if (!(de->de_status & (QNX4_FILE_USED|QNX4_FILE_LINK)))
 				continue;
 			if (!(de->de_status & QNX4_FILE_LINK)) {
 				size = sizeof(de->inode.di_fname);
-				name = de->inode.di_fname;
 				ino = blknum * QNX4_INODES_PER_BLOCK + ix - 1;
 			} else {
 				size = sizeof(de->link.dl_fname);
-				name = de->link.dl_fname;
 				ino = ( le32_to_cpu(de->link.dl_inode_blk) - 1 ) *
 					QNX4_INODES_PER_BLOCK +
 					de->link.dl_inode_ndx;
 			}
-			size = strnlen(name, size);
+			size = strnlen(de->de_name, size);
 			QNX4DEBUG((KERN_INFO "qnx4_readdir:%.*s\n", size, name));
-			if (!dir_emit(ctx, name, size, ino, DT_UNKNOWN)) {
+			if (!dir_emit(ctx, de->de_name, size, ino, DT_UNKNOWN)) {
 				brelse(bh);
 				return 0;
 			}

Re: [PATCH 5.4 00/68] 5.4.150-rc1 review

[Florian Fainelli]

On 9/27/21 10:01 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.150 release.
> There are 68 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 29 Sep 2021 17:02:05 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.150-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 5.4 00/68] 5.4.150-rc1 review

[Shuah Khan]

On 9/27/21 11:01 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.150 release.
> There are 68 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 29 Sep 2021 17:02:05 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.150-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 5.4 00/68] 5.4.150-rc1 review

[Jon Hunter]

On Mon, 27 Sep 2021 19:01:56 +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.150 release.
> There are 68 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 29 Sep 2021 17:02:05 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.150-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v5.4:
    10 builds:	10 pass, 0 fail
    26 boots:	26 pass, 0 fail
    59 tests:	59 pass, 0 fail

Linux version:	5.4.150-rc1-gaa1e7cd620d9
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra210-p3450-0000,
                tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 5.4 00/68] 5.4.150-rc1 review

[Naresh Kamboju]

On Mon, 27 Sept 2021 at 22:35, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.4.150 release.
> There are 68 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 29 Sep 2021 17:02:05 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.150-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 5.4.150-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-5.4.y
* git commit: aa1e7cd620d9f606f5b03b2e2d3ab68f5540359c
* git describe: v5.4.149-69-gaa1e7cd620d9
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.4.y/build/v5.4.149-69-gaa1e7cd620d9

## No regressions (compared to v5.4.149-69-g143ba1e50d69)

## No fixes (compared to v5.4.149-69-g143ba1e50d69)


## Test result summary
total: 71836, pass: 58826, fail: 561, skip: 11488, xfail: 961

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 288 total, 288 passed, 0 failed
* arm64: 38 total, 38 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 19 total, 19 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 51 total, 51 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 36 total, 36 passed, 0 failed
* riscv: 30 total, 30 passed, 0 failed
* s390: 12 total, 12 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 38 total, 37 passed, 1 failed

## Test suites summary
* fwts
* igt-gpu-tools
* install-android-platform-tools-r2600
* kselftest-android
* kselftest-arm64
* kselftest-arm64/arm64.btitest.bti_c_func
* kselftest-arm64/arm64.btitest.bti_j_func
* kselftest-arm64/arm64.btitest.bti_jc_func
* kselftest-arm64/arm64.btitest.bti_none_func
* kselftest-arm64/arm64.btitest.nohint_func
* kselftest-arm64/arm64.btitest.paciasp_func
* kselftest-arm64/arm64.nobtitest.bti_c_func
* kselftest-arm64/arm64.nobtitest.bti_j_func
* kselftest-arm64/arm64.nobtitest.bti_jc_func
* kselftest-arm64/arm64.nobtitest.bti_none_func
* kselftest-arm64/arm64.nobtitest.nohint_func
* kselftest-arm64/arm64.nobtitest.paciasp_func
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* prep-tmp-disk
* rcutorture
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.4 00/68] 5.4.150-rc1 review

[Sudip Mukherjee]

Hi Greg,

On Mon, Sep 27, 2021 at 07:01:56PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.150 release.
> There are 68 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 29 Sep 2021 17:02:05 +0000.
> Anything received after that time might be too late.

Build test:
mips (gcc version 11.2.1 20210911): 65 configs -> no failure
arm (gcc version 11.2.1 20210911): 107 configs -> no new failure
arm64 (gcc version 11.2.1 20210911): 2 configs -> no failure
x86_64 (gcc version 10.2.1 20210110): 4 configs -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]

[1]. https://openqa.qa.codethink.co.uk/tests/198


Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>

--
Regards
Sudip

Re: [PATCH 5.4 00/68] 5.4.150-rc1 review

[Samuel Zou]

On 2021/9/28 1:01, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.150 release.
> There are 68 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 29 Sep 2021 17:02:05 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.150-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Tested on arm64 and x86 for 5.4.150-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.4.y
Version: 5.4.150-rc1
Commit: aa1e7cd620d9f606f5b03b2e2d3ab68f5540359c
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8906
passed: 8906
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8906
passed: 8906
failed: 0
timeout: 0
--------------------------------------------------------------------

Tested-by: Hulk Robot <hulkrobot@huawei.com>