[PATCH 5.14 000/162] 5.14.9-rc1 review

[PATCH 5.14 000/162] 5.14.9-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.14.9 release.
There are 162 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 29 Sep 2021 17:02:05 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.14.9-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.14.9-rc1

Jack Pham <jackp@codeaurora.org>
    usb: gadget: f_uac2: Populate SS descriptors' wBytesPerInterval

Jack Pham <jackp@codeaurora.org>
    usb: gadget: f_uac2: Add missing companion descriptor for feedback EP

Dan Carpenter <dan.carpenter@oracle.com>
    nvmet: fix a width vs precision bug in nvmet_subsys_attr_serial_show()

Linus Torvalds <torvalds@linux-foundation.org>
    qnx4: work around gcc false positive warning bug

Juergen Gross <jgross@suse.com>
    xen/balloon: fix balloon kthread freezing

Laurentiu Tudor <laurentiu.tudor@nxp.com>
    software node: balance refcount for managed software nodes

Johan Hovold <johan@kernel.org>
    USB: serial: cp210x: fix dropped characters with CP2102

Peter Collingbourne <pcc@google.com>
    arm64: add MTE supported check to thread switching and syscall entry/exit

Marc Zyngier <maz@kernel.org>
    irqchip/armada-370-xp: Fix ack/eoi breakage

Antoine Tenart <atenart@kernel.org>
    thermal/drivers/int340x: Do not set a wrong tcc offset on resume

Juergen Gross <jgross@suse.com>
    x86/setup: Call early_reserve_memory() earlier

Borislav Petkov <bp@suse.de>
    EDAC/dmc520: Assign the proper type to dimm->edac_mode

Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
    EDAC/synopsys: Fix wrong value type assignment for edac_mode

Linus Torvalds <torvalds@linux-foundation.org>
    Revert drm/vc4 hdmi runtime PM changes

Ian Rogers <irogers@google.com>
    libperf evsel: Make use of FD robust.

Linus Torvalds <torvalds@linux-foundation.org>
    spi: Fix tegra20 build with CONFIG_PM=n

Guenter Roeck <linux@roeck-us.net>
    net: 6pack: Fix tx timeout and slot time

Guenter Roeck <linux@roeck-us.net>
    alpha: Declare virt_to_phys and virt_to_bus parameter as pointer to volatile

Dan Li <ashimida@linux.alibaba.com>
    arm64: Mark __stack_chk_guard as __ro_after_init

Simon Ser <contact@emersion.fr>
    amd/display: enable panel orientation quirks

Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
    drm/amd/display: Link training retry fix for abort case

Qingqing Zhuo <qingqing.zhuo@amd.com>
    drm/amd/display: Fix unstable HPCP compliance on Chrome Barcelo

Felix Kuehling <Felix.Kuehling@amd.com>
    drm/amdkfd: make needs_pcie_atomics FW-version dependent

Helge Deller <deller@gmx.de>
    parisc: Use absolute_pointer() to define PAGE0

Linus Torvalds <torvalds@linux-foundation.org>
    qnx4: avoid stringop-overread errors

Linus Torvalds <torvalds@linux-foundation.org>
    sparc: avoid stringop-overread errors

Guenter Roeck <linux@roeck-us.net>
    net: i825xx: Use absolute_pointer for memcpy from fixed memory location

Guenter Roeck <linux@roeck-us.net>
    compiler.h: Introduce absolute_pointer macro

Li Jinlin <lijinlin3@huawei.com>
    blk-cgroup: fix UAF by grabbing blkcg lock before destroying blkg pd

Lihong Kou <koulihong@huawei.com>
    block: flush the integrity workqueue in blk_integrity_unregister

Christoph Hellwig <hch@lst.de>
    block: check if a profile is actually registered in blk_integrity_unregister

Huang Rui <ray.huang@amd.com>
    drm/ttm: fix type mismatch error on sparc64

Simon Ser <contact@emersion.fr>
    amd/display: downgrade validation failure log level

Andreas Larsson <andreas@gaisler.com>
    sparc32: page align size in arch_dma_alloc

Ruozhu Li <liruozhu@huawei.com>
    nvme-rdma: destroy cm id before destroy qp to avoid use after free

Anton Eidelman <anton.eidelman@gmail.com>
    nvme-multipath: fix ANA state updates when a namespace is not present

Juergen Gross <jgross@suse.com>
    xen/balloon: use a kernel thread instead a workqueue

Bixuan Cui <cuibixuan@huawei.com>
    bpf: Add oversize check before call kvcalloc()

Doug Smythies <doug.smythies@gmail.com>
    cpufreq: intel_pstate: Override parameters if HWP forced by BIOS

Hamza Mahfooz <someguy@effective-light.com>
    dma-debug: prevent an error message from causing runtime problems

zhang kai <zhangkaiheb@126.com>
    ipv6: delay fib6_sernum increase in fib6_add

Guenter Roeck <linux@roeck-us.net>
    m68k: Double cast io functions to unsigned long

Ming Lei <ming.lei@redhat.com>
    blk-mq: avoid to iterate over stale request

Jesper Nilsson <jesper.nilsson@axis.com>
    net: stmmac: allow CSR clock of 300MHz

Tong Zhang <ztong0001@gmail.com>
    net: macb: fix use after free on rmmod

Nathan Rossi <nathan.rossi@digi.com>
    net: phylink: Update SFP selected interface on advertising changes

Zhihao Cheng <chengzhihao1@huawei.com>
    blktrace: Fix uaf in blk_trace access after removing by sysfs

Jens Axboe <axboe@kernel.dk>
    io_uring: don't punt files update to io-wq unconditionally

Jens Axboe <axboe@kernel.dk>
    io_uring: put provided buffer meta data under memcg accounting

Hao Xu <haoxu@linux.alibaba.com>
    io_uring: fix missing set of EPOLLONESHOT for CQ ring overflow

Hao Xu <haoxu@linux.alibaba.com>
    io_uring: fix race between poll completion and cancel_hash insertion

Kees Cook <keescook@chromium.org>
    x86/asm: Fix SETZ size enqcmds() build failure

Christoph Hellwig <hch@lst.de>
    md: fix a lock order reversal in md_alloc

Kaige Fu <kaige.fu@linux.alibaba.com>
    irqchip/gic-v3-its: Fix potential VPE leak on error

Randy Dunlap <rdunlap@infradead.org>
    irqchip/goldfish-pic: Select GENERIC_IRQ_CHIP to fix build

Dan Carpenter <dan.carpenter@oracle.com>
    scsi: lpfc: Use correct scnprintf() limit

Dmitry Bogdanov <d.bogdanov@yadro.com>
    scsi: qla2xxx: Restore initiator in dual mode

Bart Van Assche <bvanassche@acm.org>
    scsi: ufs: core: Unbreak the reset handler

Bart Van Assche <bvanassche@acm.org>
    scsi: ufs: Retry aborted SCSI commands instead of completing these successfully

Bart Van Assche <bvanassche@acm.org>
    scsi: ufs: Revert "Utilize Transfer Request List Completion Notification Register"

Bart Van Assche <bvanassche@acm.org>
    scsi: sd_zbc: Support disks with more than 2**32 logical blocks

Dan Carpenter <dan.carpenter@oracle.com>
    cifs: fix a sign extension bug

Dan Carpenter <dan.carpenter@oracle.com>
    thermal/core: Potential buffer overflow in thermal_build_list_of_policies()

Christoph Hellwig <hch@lst.de>
    nvme: keep ctrl->namespaces ordered

Sagi Grimberg <sagi@grimberg.me>
    nvme-tcp: fix incorrect h2cdata pdu offset accounting

Jiashuo Liang <liangjs@pku.edu.cn>
    x86/fault: Fix wrong signal when vsyscall fails with pkey

Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
    fpga: machxo2-spi: Fix missing error code in machxo2_write_complete()

Tom Rix <trix@redhat.com>
    fpga: machxo2-spi: Return an error on failure

Randy Dunlap <rdunlap@infradead.org>
    tty: synclink_gt: rename a conflicting function name

Maurizio Lombardi <mlombard@redhat.com>
    scsi: target: Fix the pgr/alua_support_store functions

Baokun Li <libaokun1@huawei.com>
    scsi: iscsi: Adjust iface sysfs attr detection

Philip Yang <Philip.Yang@amd.com>
    drm/amdkfd: fix dma mapping leaking warning

Philip Yang <Philip.Yang@amd.com>
    drm/amdkfd: map SVM range with correct access permission

Sudarsana Reddy Kalluru <skalluru@marvell.com>
    atlantic: Fix issue in the pm resume flow.

Aya Levin <ayal@nvidia.com>
    net/mlx4_en: Don't allow aRFS for encapsulated packets

Vladimir Oltean <vladimir.oltean@nxp.com>
    net: mscc: ocelot: fix forwarding from BLOCKING ports remaining enabled

Felix Fietkau <nbd@nbd.name>
    net: ethernet: mtk_eth_soc: avoid creating duplicate offload entries

Mark Brown <broonie@kernel.org>
    nfc: st-nci: Add SPI ID matching DT compatible

Ido Schimmel <idosch@nvidia.com>
    nexthop: Fix memory leaks in nexthop notification chain listeners

Paolo Abeni <pabeni@redhat.com>
    mptcp: ensure tx skbs always have the MPTCP ext

Shai Malin <smalin@marvell.com>
    qed: rdma - don't wait for resources under hw error recovery flow

Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
    gpio: uniphier: Fix void functions to remove return value

Hans de Goede <hdegoede@redhat.com>
    gpiolib: acpi: Make set-debounce-timeout failures non fatal

Alexandra Winter <wintera@linux.ibm.com>
    s390/qeth: fix deadlock during failing recovery

Julian Wiedmann <jwi@linux.ibm.com>
    s390/qeth: fix NULL deref in qeth_clear_working_pool_list()

Mark Brown <broonie@kernel.org>
    spi: Revert modalias changes

Cristian Marussi <cristian.marussi@arm.com>
    kselftest/arm64: signal: Skip tests if required features are missing

Mark Brown <broonie@kernel.org>
    kselftest/arm64: signal: Add SVE to the set of features we can check for

Randy Dunlap <rdunlap@infradead.org>
    platform/x86: dell: fix DELL_WMI_PRIVACY dependencies & build error

Vladimir Oltean <vladimir.oltean@nxp.com>
    net: dsa: realtek: register the MDIO bus under devres

Vladimir Oltean <vladimir.oltean@nxp.com>
    net: dsa: don't allocate the slave_mii_bus using devres

Vladimir Oltean <vladimir.oltean@nxp.com>
    net: dsa: fix dsa_tree_setup error path

Karsten Graul <kgraul@linux.ibm.com>
    net/smc: fix 'workqueue leaked lock' in smc_conn_abort_work

Karsten Graul <kgraul@linux.ibm.com>
    net/smc: add missing error check in smc_clc_prfx_set()

Yufeng Mo <moyufeng@huawei.com>
    net: hns3: fix a return value error in hclge_get_reset_status()

liaoguojia <liaoguojia@huawei.com>
    net: hns3: check vlan id before using it

Yufeng Mo <moyufeng@huawei.com>
    net: hns3: check queue id range before using

Jiaran Zhang <zhangjiaran@huawei.com>
    net: hns3: fix misuse vf id and vport id in some logs

Jian Shen <shenjian15@huawei.com>
    net: hns3: fix inconsistent vf id print

Jian Shen <shenjian15@huawei.com>
    net: hns3: fix change RSS 'hfunc' ineffective issue

Michael Chan <michael.chan@broadcom.com>
    bnxt_en: Fix TX timeout when TX ring size is set to the smallest

Xuan Zhuo <xuanzhuo@linux.alibaba.com>
    napi: fix race inside napi_enable

Christian Lamparter <chunkeey@gmail.com>
    net: bgmac-bcma: handle deferred probe error due to mac-address

Vladimir Oltean <vladimir.oltean@nxp.com>
    net: dsa: tear down devlink port regions when tearing down the devlink port on error

Randy Dunlap <rdunlap@infradead.org>
    igc: fix build errors for PTP

Claudiu Manoil <claudiu.manoil@nxp.com>
    enetc: Fix uninitialized struct dim_sample field usage

Claudiu Manoil <claudiu.manoil@nxp.com>
    enetc: Fix illegal access when reading affinity_hint

Jason Wang <jasowang@redhat.com>
    virtio-net: fix pages leaking when building skb in big mode

Chuck Lever <chuck.lever@oracle.com>
    NLM: Fix svcxdr_encode_owner()

Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
    regulator: max14577: Revert "regulator: max14577: Add proper module aliases strings"

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    platform/x86/intel: punit_ipc: Drop wrong use of ACPI_PTR()

David Howells <dhowells@redhat.com>
    afs: Fix updating of i_blocks on file/dir extension

David Howells <dhowells@redhat.com>
    afs: Fix corruption in reads at fpos 2G-4G from an OpenAFS server

David Howells <dhowells@redhat.com>
    afs: Fix incorrect triggering of sillyrename on 3rd-party invalidation

David Howells <dhowells@redhat.com>
    afs: Fix page leak

Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
    regulator: qcom-rpmh-regulator: fix pm8009-1 ldo7 resource name

Ian Abbott <abbotti@mev.co.uk>
    comedi: Fix memory leak in compat_insnlist()

Robin Murphy <robin.murphy@arm.com>
    arm64: Mitigate MTE issues with str{n}cmp()

dann frazier <dann.frazier@canonical.com>
    arm64: Restore forced disabling of KPTI on ThunderX

Mario Limonciello <mario.limonciello@amd.com>
    platform/x86: amd-pmc: Increase the response register timeout

Johan Hovold <johan@kernel.org>
    net: hso: fix muxed tty registration

Lijo Lazar <lijo.lazar@amd.com>
    drm/amd/pm: Update intermediate power state for SI

Naohiro Aota <naohiro.aota@wdc.com>
    scsi: sd_zbc: Ensure buffer size is aligned to SECTOR_SIZE

Pali Rohár <pali@kernel.org>
    serial: mvebu-uart: fix driver's tx_empty callback

Nishanth Menon <nm@ti.com>
    serial: 8250: 8250_omap: Fix RX_LVL register offset

Kishon Vijay Abraham I <kishon@ti.com>
    xhci: Set HCD flag to defer primary roothub registration

Qu Wenruo <wqu@suse.com>
    btrfs: prevent __btrfs_dump_space_info() to underflow its free space

Ido Schimmel <idosch@nvidia.com>
    nexthop: Fix division by zero while replacing a resilient group

Gao Xiang <hsiangkao@linux.alibaba.com>
    erofs: fix up erofs_lookup tracepoint

Sean Christopherson <seanjc@google.com>
    KVM: rseq: Update rseq when processing NOTIFY_RESUME on xfer to KVM guest

Dan Carpenter <dan.carpenter@oracle.com>
    mcb: fix error handling in mcb_alloc_bus()

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    misc: genwqe: Fixes DMA mask setting

Johan Hovold <johan@kernel.org>
    misc: bcm-vk: fix tty registration race

Slark Xiao <slark_xiao@163.com>
    USB: serial: option: add device id for Foxconn T99W265

Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
    USB: serial: option: remove duplicate USB device ID

Carlo Lobrano <c.lobrano@gmail.com>
    USB: serial: option: add Telit LN920 compositions

Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
    USB: serial: mos7840: remove duplicated 0xac24 device ID

Kishon Vijay Abraham I <kishon@ti.com>
    usb: core: hcd: Add support for deferring roothub registration

Pawel Laszczak <pawell@cadence.com>
    usb: cdns3: fix race condition before setting doorbell

Li Jun <jun.li@nxp.com>
    usb: dwc3: core: balance phy init and exit

Julian Sikorski <belegdol@gmail.com>
    Re-enable UAS for LaCie Rugged USB3-FW with fk quirk

Rui Miguel Silva <rui.silva@linaro.org>
    usb: isp1760: do not sleep in field register poll

Johan Hovold <johan@kernel.org>
    staging: greybus: uart: fix tty use after free

Li Li <dualli@google.com>
    binder: fix freeze race

Todd Kjos <tkjos@google.com>
    binder: make sure fd closes complete

Rafał Miłecki <rafal@milecki.pl>
    Revert "USB: bcma: Add a check for devm_gpiod_get"

Johan Hovold <johan@kernel.org>
    USB: cdc-acm: fix minor-number release

Uwe Brandt <uwe.brandt@gmail.com>
    USB: serial: cp210x: add ID for GW Instek GDM-834x Digital Multimeter

Ondrej Zary <linux@zary.sk>
    usb-storage: Add quirk for ScanLogic SL11R-IDE older than 2.6c

Jan Beulich <jbeulich@suse.com>
    xen/x86: fix PV trap handling on secondary processors

Steve French <stfrench@microsoft.com>
    cifs: fix incorrect check for null pointer in header_assemble

Rohith Surabattula <rohiths@microsoft.com>
    cifs: Fix soft lockup during fsstress

Rohith Surabattula <rohiths@microsoft.com>
    cifs: Not to defer close on file when lock is set

Dan Carpenter <dan.carpenter@oracle.com>
    usb: musb: tusb6010: uninitialized data in tusb_fifo_write_unaligned()

Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
    usb: dwc2: gadget: Fix ISOC transfer complete handling for DDMA

Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
    usb: dwc2: gadget: Fix ISOC flow for BDMA and Slave

Pavel Hofman <pavel.hofman@ivitera.com>
    usb: gadget: u_audio: EP-OUT bInterval in fback frequency

Dan Carpenter <dan.carpenter@oracle.com>
    usb: gadget: r8a66597: fix a loop in set_feature()

Chen Jun <chenjun102@huawei.com>
    mm: fix uninitialized use in overcommit_policy_handler

Weizhao Ouyang <o451686892@gmail.com>
    mm/debug: sync up MR_CONTIG_RANGE and MR_LONGTERM_PIN

Wengang Wang <wen.gang.wang@oracle.com>
    ocfs2: drop acl cache for directories too

Naoya Horiguchi <naoya.horiguchi@nec.com>
    mm, hwpoison: add is_free_buddy_page() in HWPoisonHandlable()


-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/alpha/include/asm/io.h                        |   6 +-
 arch/arm64/include/asm/assembler.h                 |   5 +
 arch/arm64/include/asm/mte.h                       |   6 +
 arch/arm64/include/asm/string.h                    |   2 +
 arch/arm64/kernel/cpufeature.c                     |   8 +-
 arch/arm64/kernel/mte.c                            |  10 +-
 arch/arm64/kernel/process.c                        |   2 +-
 arch/arm64/lib/strcmp.S                            |   2 +-
 arch/arm64/lib/strncmp.S                           |   2 +-
 arch/m68k/include/asm/raw_io.h                     |  20 +--
 arch/parisc/include/asm/page.h                     |   2 +-
 arch/s390/include/asm/ccwgroup.h                   |   2 +-
 arch/sparc/kernel/ioport.c                         |   4 +-
 arch/sparc/kernel/mdesc.c                          |   3 +-
 arch/x86/include/asm/pkeys.h                       |   2 -
 arch/x86/include/asm/special_insns.h               |   2 +-
 arch/x86/kernel/setup.c                            |  26 +--
 arch/x86/mm/fault.c                                |  26 ++-
 arch/x86/xen/enlighten_pv.c                        |  15 +-
 block/blk-cgroup.c                                 |   8 +
 block/blk-integrity.c                              |   9 +-
 block/blk-mq-tag.c                                 |   2 +-
 drivers/android/binder.c                           |  58 +++++--
 drivers/android/binder_internal.h                  |   2 +
 drivers/base/swnode.c                              |   3 +
 drivers/comedi/comedi_fops.c                       |   1 +
 drivers/cpufreq/intel_pstate.c                     |  22 ++-
 drivers/edac/dmc520_edac.c                         |   2 +-
 drivers/edac/synopsys_edac.c                       |   2 +-
 drivers/fpga/machxo2-spi.c                         |   6 +-
 drivers/gpio/gpio-uniphier.c                       |   4 +-
 drivers/gpio/gpiolib-acpi.c                        |   6 +-
 drivers/gpu/drm/amd/amdkfd/kfd_device.c            |  44 +++--
 drivers/gpu/drm/amd/amdkfd/kfd_priv.h              |   1 +
 drivers/gpu/drm/amd/amdkfd/kfd_svm.c               | 152 ++++++++++------
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c  |  53 +++++-
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c   |  10 +-
 drivers/gpu/drm/amd/pm/powerplay/si_dpm.c          |   2 +
 drivers/gpu/drm/ttm/ttm_pool.c                     |   3 +-
 drivers/gpu/drm/vc4/vc4_hdmi.c                     |  44 ++---
 drivers/irqchip/Kconfig                            |   1 +
 drivers/irqchip/irq-armada-370-xp.c                |   4 +-
 drivers/irqchip/irq-gic-v3-its.c                   |   2 +-
 drivers/mcb/mcb-core.c                             |  12 +-
 drivers/md/md.c                                    |   5 -
 drivers/misc/bcm-vk/bcm_vk_tty.c                   |   6 +-
 drivers/misc/genwqe/card_base.c                    |   2 +-
 drivers/net/dsa/mv88e6xxx/chip.c                   |  16 +-
 drivers/net/dsa/mv88e6xxx/devlink.c                |  73 +-------
 drivers/net/dsa/mv88e6xxx/devlink.h                |   6 +-
 drivers/net/dsa/realtek-smi-core.c                 |   2 +-
 .../net/ethernet/aquantia/atlantic/aq_pci_func.c   |   4 +-
 drivers/net/ethernet/broadcom/bgmac-bcma.c         |   2 +
 drivers/net/ethernet/broadcom/bnxt/bnxt.c          |   8 +-
 drivers/net/ethernet/broadcom/bnxt/bnxt.h          |   5 +
 drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c  |   2 +-
 drivers/net/ethernet/cadence/macb_pci.c            |   2 +-
 drivers/net/ethernet/freescale/enetc/enetc.c       |   7 +-
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c |   8 +-
 .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c    |  80 ++++++---
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c |  10 +-
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c  |   2 +-
 .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c  |  52 ++++--
 drivers/net/ethernet/i825xx/82596.c                |   2 +-
 drivers/net/ethernet/intel/Kconfig                 |   1 +
 drivers/net/ethernet/mediatek/mtk_ppe_offload.c    |   3 +
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c     |   3 +
 drivers/net/ethernet/mscc/ocelot.c                 |  11 +-
 drivers/net/ethernet/qlogic/qed/qed_iwarp.c        |   8 +
 drivers/net/ethernet/qlogic/qed/qed_roce.c         |   8 +
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |   2 +-
 drivers/net/hamradio/6pack.c                       |   4 +-
 drivers/net/phy/phylink.c                          |  30 +++-
 drivers/net/usb/hso.c                              |  12 +-
 drivers/net/virtio_net.c                           |   4 +
 drivers/net/vxlan.c                                |   2 +-
 drivers/nfc/st-nci/spi.c                           |   1 +
 drivers/nvme/host/core.c                           |  33 ++--
 drivers/nvme/host/multipath.c                      |   7 +-
 drivers/nvme/host/rdma.c                           |  16 +-
 drivers/nvme/host/tcp.c                            |  13 +-
 drivers/nvme/target/configfs.c                     |   2 +-
 drivers/platform/x86/amd-pmc.c                     |   2 +-
 drivers/platform/x86/dell/Kconfig                  |   3 +-
 drivers/platform/x86/intel_punit_ipc.c             |   3 +-
 drivers/regulator/max14577-regulator.c             |   2 -
 drivers/regulator/qcom-rpmh-regulator.c            |   2 +-
 drivers/s390/cio/ccwgroup.c                        |  10 +-
 drivers/s390/net/qeth_core_main.c                  |   6 +-
 drivers/scsi/lpfc/lpfc_attr.c                      |   3 +-
 drivers/scsi/qla2xxx/qla_init.c                    |   3 +-
 drivers/scsi/scsi_transport_iscsi.c                |   8 +-
 drivers/scsi/sd_zbc.c                              |   8 +-
 drivers/scsi/ufs/ufshcd.c                          |  81 ++++-----
 drivers/scsi/ufs/ufshcd.h                          |   5 -
 drivers/scsi/ufs/ufshci.h                          |   1 -
 drivers/spi/spi-tegra20-slink.c                    |   4 +-
 drivers/spi/spi.c                                  |   8 -
 drivers/staging/greybus/uart.c                     |  62 +++----
 drivers/target/target_core_configfs.c              |  32 ++--
 .../int340x_thermal/processor_thermal_device.c     |   5 +-
 drivers/thermal/thermal_core.c                     |   7 +-
 drivers/tty/serial/8250/8250_omap.c                |   2 +-
 drivers/tty/serial/mvebu-uart.c                    |   2 +-
 drivers/tty/synclink_gt.c                          |  44 ++---
 drivers/usb/cdns3/cdns3-gadget.c                   |  14 ++
 drivers/usb/class/cdc-acm.c                        |   7 +-
 drivers/usb/class/cdc-acm.h                        |   2 +
 drivers/usb/core/hcd.c                             |  29 +++-
 drivers/usb/dwc2/gadget.c                          | 193 ++++++++++++---------
 drivers/usb/dwc3/core.c                            |  30 ++--
 drivers/usb/gadget/function/f_uac2.c               |  19 +-
 drivers/usb/gadget/function/u_audio.c              |  13 +-
 drivers/usb/gadget/udc/r8a66597-udc.c              |   2 +-
 drivers/usb/host/bcma-hcd.c                        |   5 +-
 drivers/usb/host/xhci.c                            |   1 +
 drivers/usb/isp1760/isp1760-hcd.c                  |   6 +-
 drivers/usb/musb/tusb6010.c                        |   1 +
 drivers/usb/serial/cp210x.c                        |  36 ++++
 drivers/usb/serial/mos7840.c                       |   2 -
 drivers/usb/serial/option.c                        |  11 +-
 drivers/usb/storage/unusual_devs.h                 |   9 +-
 drivers/usb/storage/unusual_uas.h                  |   2 +-
 drivers/xen/balloon.c                              |  62 +++++--
 fs/afs/dir.c                                       |  46 +----
 fs/afs/dir_edit.c                                  |   4 +-
 fs/afs/fs_probe.c                                  |   8 +-
 fs/afs/fsclient.c                                  |  31 ++--
 fs/afs/inode.c                                     |  10 --
 fs/afs/internal.h                                  |  11 ++
 fs/afs/protocol_afs.h                              |  15 ++
 fs/afs/protocol_yfs.h                              |   6 +
 fs/afs/write.c                                     |  12 +-
 fs/btrfs/space-info.c                              |   5 +-
 fs/cifs/cifsglob.h                                 |   1 +
 fs/cifs/connect.c                                  |   5 +-
 fs/cifs/file.c                                     |   4 +-
 fs/cifs/misc.c                                     |   4 +-
 fs/io_uring.c                                      |  13 +-
 fs/lockd/svcxdr.h                                  |  13 +-
 fs/ocfs2/dlmglue.c                                 |   3 +-
 fs/qnx4/dir.c                                      |  69 ++++++--
 include/linux/compiler.h                           |   2 +
 include/linux/pkeys.h                              |   2 +
 include/linux/usb/hcd.h                            |   2 +
 include/net/dsa.h                                  |   8 +
 include/trace/events/erofs.h                       |   6 +-
 include/uapi/linux/android/binder.h                |   7 +
 kernel/bpf/verifier.c                              |   2 +
 kernel/dma/debug.c                                 |   3 +-
 kernel/entry/kvm.c                                 |   4 +-
 kernel/rseq.c                                      |  14 +-
 kernel/trace/blktrace.c                            |   8 +
 mm/debug.c                                         |   3 +-
 mm/memory-failure.c                                |   2 +-
 mm/util.c                                          |   4 +-
 net/core/dev.c                                     |  16 +-
 net/dsa/dsa2.c                                     |  64 ++++++-
 net/ipv4/nexthop.c                                 |  21 ++-
 net/ipv6/ip6_fib.c                                 |   3 +-
 net/mptcp/protocol.c                               |   4 +-
 net/smc/smc_clc.c                                  |   3 +-
 net/smc/smc_core.c                                 |   2 +
 tools/lib/perf/evsel.c                             |  64 ++++---
 .../testing/selftests/arm64/signal/test_signals.h  |   2 +
 .../selftests/arm64/signal/test_signals_utils.c    |  10 +-
 167 files changed, 1452 insertions(+), 867 deletions(-)

[PATCH 5.14 001/162] mm, hwpoison: add is_free_buddy_page() in HWPoisonHandlable()

[Greg Kroah-Hartman]

From: Naoya Horiguchi <naoya.horiguchi@nec.com>

commit acfa299a4a63a58e5e81a87cb16798f20d35f7d7 upstream.

Commit fcc00621d88b ("mm/hwpoison: retry with shake_page() for
unhandlable pages") changed the return value of __get_hwpoison_page() to
retry for transiently unhandlable cases.  However, __get_hwpoison_page()
currently fails to properly judge buddy pages as handlable, so hard/soft
offline for buddy pages always fail as "unhandlable page".  This is
totally regrettable.

So let's add is_free_buddy_page() in HWPoisonHandlable(), so that
__get_hwpoison_page() returns different return values between buddy
pages and unhandlable pages as intended.

Link: https://lkml.kernel.org/r/20210909004131.163221-1-naoya.horiguchi@linux.dev
Fixes: fcc00621d88b ("mm/hwpoison: retry with shake_page() for unhandlable pages")
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/memory-failure.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/memory-failure.c
+++ b/mm/memory-failure.c
@@ -1127,7 +1127,7 @@ static int page_action(struct page_state
  */
 static inline bool HWPoisonHandlable(struct page *page)
 {
-	return PageLRU(page) || __PageMovable(page);
+	return PageLRU(page) || __PageMovable(page) || is_free_buddy_page(page);
 }
 
 static int __get_hwpoison_page(struct page *page)

[PATCH 5.14 002/162] ocfs2: drop acl cache for directories too

[Greg Kroah-Hartman]

From: Wengang Wang <wen.gang.wang@oracle.com>

commit 9c0f0a03e386f4e1df33db676401547e1b7800c6 upstream.

ocfs2_data_convert_worker() is currently dropping any cached acl info
for FILE before down-converting meta lock.  It should also drop for
DIRECTORY.  Otherwise the second acl lookup returns the cached one (from
VFS layer) which could be already stale.

The problem we are seeing is that the acl changes on one node doesn't
get refreshed on other nodes in the following case:

  Node 1                    Node 2
  --------------            ----------------
  getfacl dir1

                            getfacl dir1    <-- this is OK

  setfacl -m u:user1:rwX dir1
  getfacl dir1   <-- see the change for user1

                            getfacl dir1    <-- can't see change for user1

Link: https://lkml.kernel.org/r/20210903012631.6099-1-wen.gang.wang@oracle.com
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ocfs2/dlmglue.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -3939,7 +3939,7 @@ static int ocfs2_data_convert_worker(str
 		oi = OCFS2_I(inode);
 		oi->ip_dir_lock_gen++;
 		mlog(0, "generation: %u\n", oi->ip_dir_lock_gen);
-		goto out;
+		goto out_forget;
 	}
 
 	if (!S_ISREG(inode->i_mode))
@@ -3970,6 +3970,7 @@ static int ocfs2_data_convert_worker(str
 		filemap_fdatawait(mapping);
 	}
 
+out_forget:
 	forget_all_cached_acls(inode);
 
 out:

[PATCH 5.14 003/162] mm/debug: sync up MR_CONTIG_RANGE and MR_LONGTERM_PIN

[Greg Kroah-Hartman]

From: Weizhao Ouyang <o451686892@gmail.com>

commit a4ce73910427e960b2c7f4d83229153c327d0ee7 upstream.

Sync up MR_CONTIG_RANGE and MR_LONGTERM_PIN to migrate_reason_names.

Link: https://lkml.kernel.org/r/20210921064553.293905-2-o451686892@gmail.com
Fixes: 310253514bbf ("mm/migrate: rename migration reason MR_CMA to MR_CONTIG_RANGE")
Fixes: d1e153fea2a8 ("mm/gup: migrate pinned pages out of movable zone")
Signed-off-by: Weizhao Ouyang <o451686892@gmail.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mina Almasry <almasrymina@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Wei Xu <weixugc@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/debug.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/mm/debug.c
+++ b/mm/debug.c
@@ -24,7 +24,8 @@ const char *migrate_reason_names[MR_TYPE
 	"syscall_or_cpuset",
 	"mempolicy_mbind",
 	"numa_misplaced",
-	"cma",
+	"contig_range",
+	"longterm_pin",
 };
 
 const struct trace_print_flags pageflag_names[] = {

[PATCH 5.14 004/162] mm: fix uninitialized use in overcommit_policy_handler

[Greg Kroah-Hartman]

From: Chen Jun <chenjun102@huawei.com>

commit bcbda81020c3ee77e2c098cadf3e84f99ca3de17 upstream.

We get an unexpected value of /proc/sys/vm/overcommit_memory after
running the following program:

  int main()
  {
      int fd = open("/proc/sys/vm/overcommit_memory", O_RDWR);
      write(fd, "1", 1);
      write(fd, "2", 1);
      close(fd);
  }

write(fd, "2", 1) will pass *ppos = 1 to proc_dointvec_minmax.
proc_dointvec_minmax will return 0 without setting new_policy.

  t.data = &new_policy;
  ret = proc_dointvec_minmax(&t, write, buffer, lenp, ppos)
      -->do_proc_dointvec
         -->__do_proc_dointvec
              if (write) {
                if (proc_first_pos_non_zero_ignore(ppos, table))
                  goto out;

  sysctl_overcommit_memory = new_policy;

so sysctl_overcommit_memory will be set to an uninitialized value.

Check whether new_policy has been changed by proc_dointvec_minmax.

Link: https://lkml.kernel.org/r/20210923020524.13289-1-chenjun102@huawei.com
Fixes: 56f3547bfa4d ("mm: adjust vm_committed_as_batch according to vm overcommit policy")
Signed-off-by: Chen Jun <chenjun102@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Rui Xiang <rui.xiang@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/util.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/mm/util.c
+++ b/mm/util.c
@@ -768,7 +768,7 @@ int overcommit_policy_handler(struct ctl
 		size_t *lenp, loff_t *ppos)
 {
 	struct ctl_table t;
-	int new_policy;
+	int new_policy = -1;
 	int ret;
 
 	/*
@@ -786,7 +786,7 @@ int overcommit_policy_handler(struct ctl
 		t = *table;
 		t.data = &new_policy;
 		ret = proc_dointvec_minmax(&t, write, buffer, lenp, ppos);
-		if (ret)
+		if (ret || new_policy == -1)
 			return ret;
 
 		mm_compute_batch(new_policy);

[PATCH 5.14 005/162] usb: gadget: r8a66597: fix a loop in set_feature()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 17956b53ebff6a490baf580a836cbd3eae94892b upstream.

This loop is supposed to loop until if reads something other than
CS_IDST or until it times out after 30,000 attempts.  But because of
the || vs && bug, it will never time out and instead it will loop a
minimum of 30,000 times.

This bug is quite old but the code is only used in USB_DEVICE_TEST_MODE
so it probably doesn't affect regular usage.

Fixes: 96fe53ef5498 ("usb: gadget: r8a66597-udc: add support for TEST_MODE")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210906094221.GA10957@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/udc/r8a66597-udc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/gadget/udc/r8a66597-udc.c
+++ b/drivers/usb/gadget/udc/r8a66597-udc.c
@@ -1250,7 +1250,7 @@ static void set_feature(struct r8a66597
 			do {
 				tmp = r8a66597_read(r8a66597, INTSTS0) & CTSQ;
 				udelay(1);
-			} while (tmp != CS_IDST || timeout-- > 0);
+			} while (tmp != CS_IDST && timeout-- > 0);
 
 			if (tmp == CS_IDST)
 				r8a66597_bset(r8a66597,

[PATCH 5.14 006/162] usb: gadget: u_audio: EP-OUT bInterval in fback frequency

[Greg Kroah-Hartman]

From: Pavel Hofman <pavel.hofman@ivitera.com>

commit f5dfd98a80ff8d50cf4ae2820857d7f5a46cbab9 upstream.

The patch increases the bitshift in feedback frequency
calculation with EP-OUT bInterval value.

Tests have revealed that Win10 and OSX UAC2 drivers require
the feedback frequency to be based on the actual packet
interval instead of on the USB2 microframe. Otherwise they
ignore the feedback value. Linux snd-usb-audio driver
detects the applied bitshift automatically.

Tested-by: Henrik Enquist <henrik.enquist@gmail.com>
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210906130822.12256-1-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/u_audio.c |   13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

--- a/drivers/usb/gadget/function/u_audio.c
+++ b/drivers/usb/gadget/function/u_audio.c
@@ -76,11 +76,13 @@ static const struct snd_pcm_hardware uac
 };
 
 static void u_audio_set_fback_frequency(enum usb_device_speed speed,
+					struct usb_ep *out_ep,
 					unsigned long long freq,
 					unsigned int pitch,
 					void *buf)
 {
 	u32 ff = 0;
+	const struct usb_endpoint_descriptor *ep_desc;
 
 	/*
 	 * Because the pitch base is 1000000, the final divider here
@@ -108,8 +110,13 @@ static void u_audio_set_fback_frequency(
 		 * byte fromat (that is Q16.16)
 		 *
 		 * ff = (freq << 16) / 8000
+		 *
+		 * Win10 and OSX UAC2 drivers require number of samples per packet
+		 * in order to honor the feedback value.
+		 * Linux snd-usb-audio detects the applied bit-shift automatically.
 		 */
-		freq <<= 4;
+		ep_desc = out_ep->desc;
+		freq <<= 4 + (ep_desc->bInterval - 1);
 	}
 
 	ff = DIV_ROUND_CLOSEST_ULL((freq * pitch), 1953125);
@@ -247,7 +254,7 @@ static void u_audio_iso_fback_complete(s
 		pr_debug("%s: iso_complete status(%d) %d/%d\n",
 			__func__, status, req->actual, req->length);
 
-	u_audio_set_fback_frequency(audio_dev->gadget->speed,
+	u_audio_set_fback_frequency(audio_dev->gadget->speed, audio_dev->out_ep,
 				    params->c_srate, prm->pitch,
 				    req->buf);
 
@@ -506,7 +513,7 @@ int u_audio_start_capture(struct g_audio
 	 * be meauserd at start of playback
 	 */
 	prm->pitch = 1000000;
-	u_audio_set_fback_frequency(audio_dev->gadget->speed,
+	u_audio_set_fback_frequency(audio_dev->gadget->speed, ep,
 				    params->c_srate, prm->pitch,
 				    req_fback->buf);
 

[PATCH 5.14 007/162] usb: dwc2: gadget: Fix ISOC flow for BDMA and Slave

[Greg Kroah-Hartman]

From: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>

commit 91bb163e1e4f88092f50dfaa5a816b658753e4b2 upstream.

According USB spec each ISOC transaction should be performed in a
designated for that transaction interval. On bus errors or delays
in operating system scheduling of client software can result in no
packet being transferred for a (micro)frame. An error indication
should be returned as status to the client software in such a case.

Current implementation in case of missed/dropped interval send same
data in next possible interval instead of reporting missed isoc.

This fix complete requests with -ENODATA if interval elapsed.

HSOTG core in BDMA and Slave modes haven't HW support for
(micro)frames tracking, this is why SW should care about tracking
of (micro)frames. Because of that method and consider operating
system scheduling delays, added few additional checking's of elapsed
target (micro)frame:
1. Immediately before enabling EP to start transfer.
2. With any transfer completion interrupt.
3. With incomplete isoc in/out interrupt.
4. With EP disabled interrupt because of incomplete transfer.
5. With OUT token received while EP disabled interrupt (for OUT
transfers).
6. With NAK replied to IN token interrupt (for IN transfers).

As part of ISOC flow, additionally fixed 'current' and 'target' frame
calculation functions. In HS mode SOF limits provided by DSTS register
is 0x3fff, but in non HS mode this limit is 0x7ff.

Tested by internal tool which also using for dwc3 testing.

Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/95d1423adf4b0f68187c9894820c4b7e964a3f7f.1631175721.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc2/gadget.c |  189 +++++++++++++++++++++++++---------------------
 1 file changed, 106 insertions(+), 83 deletions(-)

--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -115,10 +115,16 @@ static inline bool using_desc_dma(struct
  */
 static inline void dwc2_gadget_incr_frame_num(struct dwc2_hsotg_ep *hs_ep)
 {
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+	u16 limit = DSTS_SOFFN_LIMIT;
+
+	if (hsotg->gadget.speed != USB_SPEED_HIGH)
+		limit >>= 3;
+
 	hs_ep->target_frame += hs_ep->interval;
-	if (hs_ep->target_frame > DSTS_SOFFN_LIMIT) {
+	if (hs_ep->target_frame > limit) {
 		hs_ep->frame_overrun = true;
-		hs_ep->target_frame &= DSTS_SOFFN_LIMIT;
+		hs_ep->target_frame &= limit;
 	} else {
 		hs_ep->frame_overrun = false;
 	}
@@ -136,10 +142,16 @@ static inline void dwc2_gadget_incr_fram
  */
 static inline void dwc2_gadget_dec_frame_num_by_one(struct dwc2_hsotg_ep *hs_ep)
 {
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+	u16 limit = DSTS_SOFFN_LIMIT;
+
+	if (hsotg->gadget.speed != USB_SPEED_HIGH)
+		limit >>= 3;
+
 	if (hs_ep->target_frame)
 		hs_ep->target_frame -= 1;
 	else
-		hs_ep->target_frame = DSTS_SOFFN_LIMIT;
+		hs_ep->target_frame = limit;
 }
 
 /**
@@ -1018,6 +1030,12 @@ static void dwc2_gadget_start_isoc_ddma(
 	dwc2_writel(hsotg, ctrl, depctl);
 }
 
+static bool dwc2_gadget_target_frame_elapsed(struct dwc2_hsotg_ep *hs_ep);
+static void dwc2_hsotg_complete_request(struct dwc2_hsotg *hsotg,
+					struct dwc2_hsotg_ep *hs_ep,
+				       struct dwc2_hsotg_req *hs_req,
+				       int result);
+
 /**
  * dwc2_hsotg_start_req - start a USB request from an endpoint's queue
  * @hsotg: The controller state.
@@ -1170,14 +1188,19 @@ static void dwc2_hsotg_start_req(struct
 		}
 	}
 
-	if (hs_ep->isochronous && hs_ep->interval == 1) {
-		hs_ep->target_frame = dwc2_hsotg_read_frameno(hsotg);
-		dwc2_gadget_incr_frame_num(hs_ep);
-
-		if (hs_ep->target_frame & 0x1)
-			ctrl |= DXEPCTL_SETODDFR;
-		else
-			ctrl |= DXEPCTL_SETEVENFR;
+	if (hs_ep->isochronous) {
+		if (!dwc2_gadget_target_frame_elapsed(hs_ep)) {
+			if (hs_ep->interval == 1) {
+				if (hs_ep->target_frame & 0x1)
+					ctrl |= DXEPCTL_SETODDFR;
+				else
+					ctrl |= DXEPCTL_SETEVENFR;
+			}
+			ctrl |= DXEPCTL_CNAK;
+		} else {
+			dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, -ENODATA);
+			return;
+		}
 	}
 
 	ctrl |= DXEPCTL_EPENA;	/* ensure ep enabled */
@@ -1325,12 +1348,16 @@ static bool dwc2_gadget_target_frame_ela
 	u32 target_frame = hs_ep->target_frame;
 	u32 current_frame = hsotg->frame_number;
 	bool frame_overrun = hs_ep->frame_overrun;
+	u16 limit = DSTS_SOFFN_LIMIT;
+
+	if (hsotg->gadget.speed != USB_SPEED_HIGH)
+		limit >>= 3;
 
 	if (!frame_overrun && current_frame >= target_frame)
 		return true;
 
 	if (frame_overrun && current_frame >= target_frame &&
-	    ((current_frame - target_frame) < DSTS_SOFFN_LIMIT / 2))
+	    ((current_frame - target_frame) < limit / 2))
 		return true;
 
 	return false;
@@ -1713,11 +1740,9 @@ static struct dwc2_hsotg_req *get_ep_hea
  */
 static void dwc2_gadget_start_next_request(struct dwc2_hsotg_ep *hs_ep)
 {
-	u32 mask;
 	struct dwc2_hsotg *hsotg = hs_ep->parent;
 	int dir_in = hs_ep->dir_in;
 	struct dwc2_hsotg_req *hs_req;
-	u32 epmsk_reg = dir_in ? DIEPMSK : DOEPMSK;
 
 	if (!list_empty(&hs_ep->queue)) {
 		hs_req = get_ep_head(hs_ep);
@@ -1733,9 +1758,6 @@ static void dwc2_gadget_start_next_reque
 	} else {
 		dev_dbg(hsotg->dev, "%s: No more ISOC-OUT requests\n",
 			__func__);
-		mask = dwc2_readl(hsotg, epmsk_reg);
-		mask |= DOEPMSK_OUTTKNEPDISMSK;
-		dwc2_writel(hsotg, mask, epmsk_reg);
 	}
 }
 
@@ -2305,19 +2327,6 @@ static void dwc2_hsotg_ep0_zlp(struct dw
 	dwc2_hsotg_program_zlp(hsotg, hsotg->eps_out[0]);
 }
 
-static void dwc2_hsotg_change_ep_iso_parity(struct dwc2_hsotg *hsotg,
-					    u32 epctl_reg)
-{
-	u32 ctrl;
-
-	ctrl = dwc2_readl(hsotg, epctl_reg);
-	if (ctrl & DXEPCTL_EOFRNUM)
-		ctrl |= DXEPCTL_SETEVENFR;
-	else
-		ctrl |= DXEPCTL_SETODDFR;
-	dwc2_writel(hsotg, ctrl, epctl_reg);
-}
-
 /*
  * dwc2_gadget_get_xfersize_ddma - get transferred bytes amount from desc
  * @hs_ep - The endpoint on which transfer went
@@ -2438,20 +2447,11 @@ static void dwc2_hsotg_handle_outdone(st
 			dwc2_hsotg_ep0_zlp(hsotg, true);
 	}
 
-	/*
-	 * Slave mode OUT transfers do not go through XferComplete so
-	 * adjust the ISOC parity here.
-	 */
-	if (!using_dma(hsotg)) {
-		if (hs_ep->isochronous && hs_ep->interval == 1)
-			dwc2_hsotg_change_ep_iso_parity(hsotg, DOEPCTL(epnum));
-		else if (hs_ep->isochronous && hs_ep->interval > 1)
-			dwc2_gadget_incr_frame_num(hs_ep);
-	}
-
 	/* Set actual frame number for completed transfers */
-	if (!using_desc_dma(hsotg) && hs_ep->isochronous)
-		req->frame_number = hsotg->frame_number;
+	if (!using_desc_dma(hsotg) && hs_ep->isochronous) {
+		req->frame_number = hs_ep->target_frame;
+		dwc2_gadget_incr_frame_num(hs_ep);
+	}
 
 	dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, result);
 }
@@ -2765,6 +2765,12 @@ static void dwc2_hsotg_complete_in(struc
 		return;
 	}
 
+	/* Set actual frame number for completed transfers */
+	if (!using_desc_dma(hsotg) && hs_ep->isochronous) {
+		hs_req->req.frame_number = hs_ep->target_frame;
+		dwc2_gadget_incr_frame_num(hs_ep);
+	}
+
 	dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, 0);
 }
 
@@ -2825,23 +2831,18 @@ static void dwc2_gadget_handle_ep_disabl
 
 		dwc2_hsotg_txfifo_flush(hsotg, hs_ep->fifo_index);
 
-		if (hs_ep->isochronous) {
-			dwc2_hsotg_complete_in(hsotg, hs_ep);
-			return;
-		}
-
 		if ((epctl & DXEPCTL_STALL) && (epctl & DXEPCTL_EPTYPE_BULK)) {
 			int dctl = dwc2_readl(hsotg, DCTL);
 
 			dctl |= DCTL_CGNPINNAK;
 			dwc2_writel(hsotg, dctl, DCTL);
 		}
-		return;
-	}
+	} else {
 
-	if (dctl & DCTL_GOUTNAKSTS) {
-		dctl |= DCTL_CGOUTNAK;
-		dwc2_writel(hsotg, dctl, DCTL);
+		if (dctl & DCTL_GOUTNAKSTS) {
+			dctl |= DCTL_CGOUTNAK;
+			dwc2_writel(hsotg, dctl, DCTL);
+		}
 	}
 
 	if (!hs_ep->isochronous)
@@ -2862,8 +2863,6 @@ static void dwc2_gadget_handle_ep_disabl
 		/* Update current frame number value. */
 		hsotg->frame_number = dwc2_hsotg_read_frameno(hsotg);
 	} while (dwc2_gadget_target_frame_elapsed(hs_ep));
-
-	dwc2_gadget_start_next_request(hs_ep);
 }
 
 /**
@@ -2880,8 +2879,8 @@ static void dwc2_gadget_handle_ep_disabl
 static void dwc2_gadget_handle_out_token_ep_disabled(struct dwc2_hsotg_ep *ep)
 {
 	struct dwc2_hsotg *hsotg = ep->parent;
+	struct dwc2_hsotg_req *hs_req;
 	int dir_in = ep->dir_in;
-	u32 doepmsk;
 
 	if (dir_in || !ep->isochronous)
 		return;
@@ -2895,28 +2894,39 @@ static void dwc2_gadget_handle_out_token
 		return;
 	}
 
-	if (ep->interval > 1 &&
-	    ep->target_frame == TARGET_FRAME_INITIAL) {
+	if (ep->target_frame == TARGET_FRAME_INITIAL) {
 		u32 ctrl;
 
 		ep->target_frame = hsotg->frame_number;
-		dwc2_gadget_incr_frame_num(ep);
+		if (ep->interval > 1) {
+			ctrl = dwc2_readl(hsotg, DOEPCTL(ep->index));
+			if (ep->target_frame & 0x1)
+				ctrl |= DXEPCTL_SETODDFR;
+			else
+				ctrl |= DXEPCTL_SETEVENFR;
 
-		ctrl = dwc2_readl(hsotg, DOEPCTL(ep->index));
-		if (ep->target_frame & 0x1)
-			ctrl |= DXEPCTL_SETODDFR;
-		else
-			ctrl |= DXEPCTL_SETEVENFR;
+			dwc2_writel(hsotg, ctrl, DOEPCTL(ep->index));
+		}
+	}
+
+	while (dwc2_gadget_target_frame_elapsed(ep)) {
+		hs_req = get_ep_head(ep);
+		if (hs_req)
+			dwc2_hsotg_complete_request(hsotg, ep, hs_req, -ENODATA);
 
-		dwc2_writel(hsotg, ctrl, DOEPCTL(ep->index));
+		dwc2_gadget_incr_frame_num(ep);
+		/* Update current frame number value. */
+		hsotg->frame_number = dwc2_hsotg_read_frameno(hsotg);
 	}
 
-	dwc2_gadget_start_next_request(ep);
-	doepmsk = dwc2_readl(hsotg, DOEPMSK);
-	doepmsk &= ~DOEPMSK_OUTTKNEPDISMSK;
-	dwc2_writel(hsotg, doepmsk, DOEPMSK);
+	if (!ep->req)
+		dwc2_gadget_start_next_request(ep);
+
 }
 
+static void dwc2_hsotg_ep_stop_xfr(struct dwc2_hsotg *hsotg,
+				   struct dwc2_hsotg_ep *hs_ep);
+
 /**
  * dwc2_gadget_handle_nak - handle NAK interrupt
  * @hs_ep: The endpoint on which interrupt is asserted.
@@ -2934,7 +2944,9 @@ static void dwc2_gadget_handle_out_token
 static void dwc2_gadget_handle_nak(struct dwc2_hsotg_ep *hs_ep)
 {
 	struct dwc2_hsotg *hsotg = hs_ep->parent;
+	struct dwc2_hsotg_req *hs_req;
 	int dir_in = hs_ep->dir_in;
+	u32 ctrl;
 
 	if (!dir_in || !hs_ep->isochronous)
 		return;
@@ -2976,13 +2988,29 @@ static void dwc2_gadget_handle_nak(struc
 
 			dwc2_writel(hsotg, ctrl, DIEPCTL(hs_ep->index));
 		}
-
-		dwc2_hsotg_complete_request(hsotg, hs_ep,
-					    get_ep_head(hs_ep), 0);
 	}
 
-	if (!using_desc_dma(hsotg))
+	if (using_desc_dma(hsotg))
+		return;
+
+	ctrl = dwc2_readl(hsotg, DIEPCTL(hs_ep->index));
+	if (ctrl & DXEPCTL_EPENA)
+		dwc2_hsotg_ep_stop_xfr(hsotg, hs_ep);
+	else
+		dwc2_hsotg_txfifo_flush(hsotg, hs_ep->fifo_index);
+
+	while (dwc2_gadget_target_frame_elapsed(hs_ep)) {
+		hs_req = get_ep_head(hs_ep);
+		if (hs_req)
+			dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, -ENODATA);
+
 		dwc2_gadget_incr_frame_num(hs_ep);
+		/* Update current frame number value. */
+		hsotg->frame_number = dwc2_hsotg_read_frameno(hsotg);
+	}
+
+	if (!hs_ep->req)
+		dwc2_gadget_start_next_request(hs_ep);
 }
 
 /**
@@ -3047,12 +3075,8 @@ static void dwc2_hsotg_epint(struct dwc2
 			 * need to look at completing IN requests here
 			 * if operating slave mode
 			 */
-			if (hs_ep->isochronous && hs_ep->interval > 1)
-				dwc2_gadget_incr_frame_num(hs_ep);
-
-			dwc2_hsotg_complete_in(hsotg, hs_ep);
-			if (ints & DXEPINT_NAKINTRPT)
-				ints &= ~DXEPINT_NAKINTRPT;
+			if (!hs_ep->isochronous || !(ints & DXEPINT_NAKINTRPT))
+				dwc2_hsotg_complete_in(hsotg, hs_ep);
 
 			if (idx == 0 && !hs_ep->req)
 				dwc2_hsotg_enqueue_setup(hsotg);
@@ -3061,10 +3085,8 @@ static void dwc2_hsotg_epint(struct dwc2
 			 * We're using DMA, we need to fire an OutDone here
 			 * as we ignore the RXFIFO.
 			 */
-			if (hs_ep->isochronous && hs_ep->interval > 1)
-				dwc2_gadget_incr_frame_num(hs_ep);
-
-			dwc2_hsotg_handle_outdone(hsotg, idx);
+			if (!hs_ep->isochronous || !(ints & DXEPINT_OUTTKNEPDIS))
+				dwc2_hsotg_handle_outdone(hsotg, idx);
 		}
 	}
 
@@ -4083,6 +4105,7 @@ static int dwc2_hsotg_ep_enable(struct u
 			mask |= DIEPMSK_NAKMSK;
 			dwc2_writel(hsotg, mask, DIEPMSK);
 		} else {
+			epctrl |= DXEPCTL_SNAK;
 			mask = dwc2_readl(hsotg, DOEPMSK);
 			mask |= DOEPMSK_OUTTKNEPDISMSK;
 			dwc2_writel(hsotg, mask, DOEPMSK);

[PATCH 5.14 008/162] usb: dwc2: gadget: Fix ISOC transfer complete handling for DDMA

[Greg Kroah-Hartman]

From: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>

commit dbe2518b2d8eabffa74dbf7d9fdd7dacddab7fc0 upstream.

When last descriptor in a descriptor list completed with XferComplete
interrupt, core switching to handle next descriptor and assert BNA
interrupt. Both these interrupts are set while dwc2_hsotg_epint()
handler called. Each interrupt should be handled separately: first
XferComplete interrupt then BNA interrupt, otherwise last completed
transfer will not be giveback to function driver as completed
request.

Fixes: 729cac693eec ("usb: dwc2: Change ISOC DDMA flow")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/a36981accc26cd674c5d8f8da6164344b94ec1fe.1631386531.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc2/gadget.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -3066,9 +3066,7 @@ static void dwc2_hsotg_epint(struct dwc2
 
 		/* In DDMA handle isochronous requests separately */
 		if (using_desc_dma(hsotg) && hs_ep->isochronous) {
-			/* XferCompl set along with BNA */
-			if (!(ints & DXEPINT_BNAINTR))
-				dwc2_gadget_complete_isoc_request_ddma(hs_ep);
+			dwc2_gadget_complete_isoc_request_ddma(hs_ep);
 		} else if (dir_in) {
 			/*
 			 * We get OutDone from the FIFO, so we only

[PATCH 5.14 009/162] usb: musb: tusb6010: uninitialized data in tusb_fifo_write_unaligned()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 517c7bf99bad3d6b9360558414aae634b7472d80 upstream.

This is writing to the first 1 - 3 bytes of "val" and then writing all
four bytes to musb_writel().  The last byte is always going to be
garbage.  Zero out the last bytes instead.

Fixes: 550a7375fe72 ("USB: Add MUSB and TUSB support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210916135737.GI25094@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/musb/tusb6010.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -190,6 +190,7 @@ tusb_fifo_write_unaligned(void __iomem *
 	}
 	if (len > 0) {
 		/* Write the rest 1 - 3 bytes to FIFO */
+		val = 0;
 		memcpy(&val, buf, len);
 		musb_writel(fifo, 0, val);
 	}

[PATCH 5.14 010/162] cifs: Not to defer close on file when lock is set

[Greg Kroah-Hartman]

From: Rohith Surabattula <rohiths@microsoft.com>

commit 35866f3f779aef5e7ba84e4d1023fe2e2a0e219e upstream.

Close file immediately when lock is set.

Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/cifs/cifsglob.h |    1 +
 fs/cifs/file.c     |    2 ++
 2 files changed, 3 insertions(+)

--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -1403,6 +1403,7 @@ struct cifsInodeInfo {
 #define CIFS_INO_INVALID_MAPPING	  (4) /* pagecache is invalid */
 #define CIFS_INO_LOCK			  (5) /* lock bit for synchronization */
 #define CIFS_INO_MODIFIED_ATTR            (6) /* Indicate change in mtime/ctime */
+#define CIFS_INO_CLOSE_ON_LOCK            (7) /* Not to defer the close when lock is set */
 	unsigned long flags;
 	spinlock_t writers_lock;
 	unsigned int writers;		/* Number of writers on this inode */
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -881,6 +881,7 @@ int cifs_close(struct inode *inode, stru
 		dclose = kmalloc(sizeof(struct cifs_deferred_close), GFP_KERNEL);
 		if ((cinode->oplock == CIFS_CACHE_RHW_FLG) &&
 		    cinode->lease_granted &&
+		    !test_bit(CIFS_INO_CLOSE_ON_LOCK, &cinode->flags) &&
 		    dclose) {
 			if (test_bit(CIFS_INO_MODIFIED_ATTR, &cinode->flags))
 				inode->i_ctime = inode->i_mtime = current_time(inode);
@@ -1861,6 +1862,7 @@ int cifs_lock(struct file *file, int cmd
 	cifs_read_flock(flock, &type, &lock, &unlock, &wait_flag,
 			tcon->ses->server);
 	cifs_sb = CIFS_FILE_SB(file);
+	set_bit(CIFS_INO_CLOSE_ON_LOCK, &CIFS_I(d_inode(cfile->dentry))->flags);
 
 	if (cap_unix(tcon->ses) &&
 	    (CIFS_UNIX_FCNTL_CAP & le64_to_cpu(tcon->fsUnixInfo.Capability)) &&

[PATCH 5.14 011/162] cifs: Fix soft lockup during fsstress

[Greg Kroah-Hartman]

From: Rohith Surabattula <rohiths@microsoft.com>

commit 71826b068884050d5fdd37fda857ba1539c513d3 upstream.

Below traces are observed during fsstress and system got hung.
[  130.698396] watchdog: BUG: soft lockup - CPU#6 stuck for 26s!

Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/cifs/misc.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@ -736,7 +736,7 @@ cifs_close_deferred_file(struct cifsInod
 			if (cancel_delayed_work(&cfile->deferred)) {
 				tmp_list = kmalloc(sizeof(struct file_list), GFP_ATOMIC);
 				if (tmp_list == NULL)
-					continue;
+					break;
 				tmp_list->cfile = cfile;
 				list_add_tail(&tmp_list->list, &file_head);
 			}
@@ -767,7 +767,7 @@ cifs_close_all_deferred_files(struct cif
 			if (cancel_delayed_work(&cfile->deferred)) {
 				tmp_list = kmalloc(sizeof(struct file_list), GFP_ATOMIC);
 				if (tmp_list == NULL)
-					continue;
+					break;
 				tmp_list->cfile = cfile;
 				list_add_tail(&tmp_list->list, &file_head);
 			}

[PATCH 5.14 012/162] cifs: fix incorrect check for null pointer in header_assemble

[Greg Kroah-Hartman]

From: Steve French <stfrench@microsoft.com>

commit 9ed38fd4a15417cac83967360cf20b853bfab9b6 upstream.

Although very unlikely that the tlink pointer would be null in this case,
get_next_mid function can in theory return null (but not an error)
so need to check for null (not for IS_ERR, which can not be returned
here).

Address warning:

        fs/smbfs_client/connect.c:2392 cifs_match_super()
        warn: 'tlink' isn't an ERR_PTR

Pointed out by Dan Carpenter via smatch code analysis tool

CC: stable@vger.kernel.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/cifs/connect.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -2382,9 +2382,10 @@ cifs_match_super(struct super_block *sb,
 	spin_lock(&cifs_tcp_ses_lock);
 	cifs_sb = CIFS_SB(sb);
 	tlink = cifs_get_tlink(cifs_sb_master_tlink(cifs_sb));
-	if (IS_ERR(tlink)) {
+	if (tlink == NULL) {
+		/* can not match superblock if tlink were ever null */
 		spin_unlock(&cifs_tcp_ses_lock);
-		return rc;
+		return 0;
 	}
 	tcon = tlink_tcon(tlink);
 	ses = tcon->ses;

[PATCH 5.14 013/162] xen/x86: fix PV trap handling on secondary processors

[Greg Kroah-Hartman]

From: Jan Beulich <jbeulich@suse.com>

commit 0594c58161b6e0f3da8efa9c6e3d4ba52b652717 upstream.

The initial observation was that in PV mode under Xen 32-bit user space
didn't work anymore. Attempts of system calls ended in #GP(0x402). All
of the sudden the vector 0x80 handler was not in place anymore. As it
turns out up to 5.13 redundant initialization did occur: Once from
cpu_initialize_context() (through its VCPUOP_initialise hypercall) and a
2nd time while each CPU was brought fully up. This 2nd initialization is
now gone, uncovering that the 1st one was flawed: Unlike for the
set_trap_table hypercall, a full virtual IDT needs to be specified here;
the "vector" fields of the individual entries are of no interest. With
many (kernel) IDT entries still(?) (i.e. at that point at least) empty,
the syscall vector 0x80 ended up in slot 0x20 of the virtual IDT, thus
becoming the domain's handler for vector 0x20.

Make xen_convert_trap_info() fit for either purpose, leveraging the fact
that on the xen_copy_trap_info() path the table starts out zero-filled.
This includes moving out the writing of the sentinel, which would also
have lead to a buffer overrun in the xen_copy_trap_info() case if all
(kernel) IDT entries were populated. Convert the writing of the sentinel
to clearing of the entire table entry rather than just the address
field.

(I didn't bother trying to identify the commit which uncovered the issue
in 5.14; the commit named below is the one which actually introduced the
bad code.)

Fixes: f87e4cac4f4e ("xen: SMP guest support")
Cc: stable@vger.kernel.org
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/7a266932-092e-b68f-f2bb-1473b61adc6e@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/xen/enlighten_pv.c |   15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

--- a/arch/x86/xen/enlighten_pv.c
+++ b/arch/x86/xen/enlighten_pv.c
@@ -756,8 +756,8 @@ static void xen_write_idt_entry(gate_des
 	preempt_enable();
 }
 
-static void xen_convert_trap_info(const struct desc_ptr *desc,
-				  struct trap_info *traps)
+static unsigned xen_convert_trap_info(const struct desc_ptr *desc,
+				      struct trap_info *traps, bool full)
 {
 	unsigned in, out, count;
 
@@ -767,17 +767,18 @@ static void xen_convert_trap_info(const
 	for (in = out = 0; in < count; in++) {
 		gate_desc *entry = (gate_desc *)(desc->address) + in;
 
-		if (cvt_gate_to_trap(in, entry, &traps[out]))
+		if (cvt_gate_to_trap(in, entry, &traps[out]) || full)
 			out++;
 	}
-	traps[out].address = 0;
+
+	return out;
 }
 
 void xen_copy_trap_info(struct trap_info *traps)
 {
 	const struct desc_ptr *desc = this_cpu_ptr(&idt_desc);
 
-	xen_convert_trap_info(desc, traps);
+	xen_convert_trap_info(desc, traps, true);
 }
 
 /* Load a new IDT into Xen.  In principle this can be per-CPU, so we
@@ -787,6 +788,7 @@ static void xen_load_idt(const struct de
 {
 	static DEFINE_SPINLOCK(lock);
 	static struct trap_info traps[257];
+	unsigned out;
 
 	trace_xen_cpu_load_idt(desc);
 
@@ -794,7 +796,8 @@ static void xen_load_idt(const struct de
 
 	memcpy(this_cpu_ptr(&idt_desc), desc, sizeof(idt_desc));
 
-	xen_convert_trap_info(desc, traps);
+	out = xen_convert_trap_info(desc, traps, false);
+	memset(&traps[out], 0, sizeof(traps[0]));
 
 	xen_mc_flush();
 	if (HYPERVISOR_set_trap_table(traps))

[PATCH 5.14 014/162] usb-storage: Add quirk for ScanLogic SL11R-IDE older than 2.6c

[Greg Kroah-Hartman]

From: Ondrej Zary <linux@zary.sk>

commit b55d37ef6b7db3eda9b4495a8d9b0a944ee8c67d upstream.

ScanLogic SL11R-IDE with firmware older than 2.6c (the latest one) has
broken tag handling, preventing the device from working at all:
usb 1-1: new full-speed USB device number 2 using uhci_hcd
usb 1-1: New USB device found, idVendor=04ce, idProduct=0002, bcdDevice= 2.60
usb 1-1: New USB device strings: Mfr=1, Product=1, SerialNumber=0
usb 1-1: Product: USB Device
usb 1-1: Manufacturer: USB Device
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi host2: usb-storage 1-1:1.0
usbcore: registered new interface driver usb-storage
usb 1-1: reset full-speed USB device number 2 using uhci_hcd
usb 1-1: reset full-speed USB device number 2 using uhci_hcd
usb 1-1: reset full-speed USB device number 2 using uhci_hcd
usb 1-1: reset full-speed USB device number 2 using uhci_hcd

Add US_FL_BULK_IGNORE_TAG to fix it. Also update my e-mail address.

2.6c is the only firmware that claims Linux compatibility.
The firmware can be upgraded using ezotgdbg utility:
https://github.com/asciilifeform/ezotgdbg

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ondrej Zary <linux@zary.sk>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210913210106.12717-1-linux@zary.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/storage/unusual_devs.h |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -416,9 +416,16 @@ UNUSUAL_DEV(  0x04cb, 0x0100, 0x0000, 0x
 		USB_SC_UFI, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN),
 
 /*
- * Reported by Ondrej Zary <linux@rainbow-software.org>
+ * Reported by Ondrej Zary <linux@zary.sk>
  * The device reports one sector more and breaks when that sector is accessed
+ * Firmwares older than 2.6c (the latest one and the only that claims Linux
+ * support) have also broken tag handling
  */
+UNUSUAL_DEV(  0x04ce, 0x0002, 0x0000, 0x026b,
+		"ScanLogic",
+		"SL11R-IDE",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY | US_FL_BULK_IGNORE_TAG),
 UNUSUAL_DEV(  0x04ce, 0x0002, 0x026c, 0x026c,
 		"ScanLogic",
 		"SL11R-IDE",

[PATCH 5.14 015/162] USB: serial: cp210x: add ID for GW Instek GDM-834x Digital Multimeter

[Greg Kroah-Hartman]

From: Uwe Brandt <uwe.brandt@gmail.com>

commit 3bd18ba7d859eb1fbef3beb1e80c24f6f7d7596c upstream.

Add the USB serial device ID for the GW Instek GDM-834x Digital Multimeter.

Signed-off-by: Uwe Brandt <uwe.brandt@gmail.com>
Link: https://lore.kernel.org/r/YUxFl3YUCPGJZd8Y@hovoldconsulting.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/cp210x.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -233,6 +233,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x1FB9, 0x0602) }, /* Lake Shore Model 648 Magnet Power Supply */
 	{ USB_DEVICE(0x1FB9, 0x0700) }, /* Lake Shore Model 737 VSM Controller */
 	{ USB_DEVICE(0x1FB9, 0x0701) }, /* Lake Shore Model 776 Hall Matrix */
+	{ USB_DEVICE(0x2184, 0x0030) }, /* GW Instek GDM-834x Digital Multimeter */
 	{ USB_DEVICE(0x2626, 0xEA60) }, /* Aruba Networks 7xxx USB Serial Console */
 	{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
 	{ USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */

[PATCH 5.14 016/162] USB: cdc-acm: fix minor-number release

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 91fac0741d4817945c6ee0a17591421e7f5ecb86 upstream.

If the driver runs out of minor numbers it would release minor 0 and
allow another device to claim the minor while still in use.

Fortunately, registering the tty class device of the second device would
fail (with a stack dump) due to the sysfs name collision so no memory is
leaked.

Fixes: cae2bc768d17 ("usb: cdc-acm: Decrement tty port's refcount if probe() fail")
Cc: stable@vger.kernel.org      # 4.19
Cc: Jaejoong Kim <climbbb.kim@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210907082318.7757-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/class/cdc-acm.c |    7 +++++--
 drivers/usb/class/cdc-acm.h |    2 ++
 2 files changed, 7 insertions(+), 2 deletions(-)

--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -726,7 +726,8 @@ static void acm_port_destruct(struct tty
 {
 	struct acm *acm = container_of(port, struct acm, port);
 
-	acm_release_minor(acm);
+	if (acm->minor != ACM_MINOR_INVALID)
+		acm_release_minor(acm);
 	usb_put_intf(acm->control);
 	kfree(acm->country_codes);
 	kfree(acm);
@@ -1323,8 +1324,10 @@ made_compressed_probe:
 	usb_get_intf(acm->control); /* undone in destruct() */
 
 	minor = acm_alloc_minor(acm);
-	if (minor < 0)
+	if (minor < 0) {
+		acm->minor = ACM_MINOR_INVALID;
 		goto err_put_port;
+	}
 
 	acm->minor = minor;
 	acm->dev = usb_dev;
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -22,6 +22,8 @@
 #define ACM_TTY_MAJOR		166
 #define ACM_TTY_MINORS		256
 
+#define ACM_MINOR_INVALID	ACM_TTY_MINORS
+
 /*
  * Requests.
  */

[PATCH 5.14 017/162] Revert "USB: bcma: Add a check for devm_gpiod_get"

[Greg Kroah-Hartman]

From: Rafał Miłecki <rafal@milecki.pl>

commit d91adc5322ab53df4b6d1989242bfb6c63163eb2 upstream.

This reverts commit f3de5d857bb2362b00e2a8d4bc886cd49dcb66db.

That commit broke USB on all routers that have USB always powered on and
don't require toggling any GPIO. It's a majority of devices actually.

The original code worked and seemed safe: vcc GPIO is optional and
bcma_hci_platform_power_gpio() takes care of checking the pointer before
using it.

This revert fixes:
[   10.801127] bcma_hcd: probe of bcma0:11 failed with error -2

Fixes: f3de5d857bb2 ("USB: bcma: Add a check for devm_gpiod_get")
Cc: stable <stable@vger.kernel.org>
Cc: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20210831065419.18371-1-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/bcma-hcd.c |    5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

--- a/drivers/usb/host/bcma-hcd.c
+++ b/drivers/usb/host/bcma-hcd.c
@@ -406,12 +406,9 @@ static int bcma_hcd_probe(struct bcma_de
 		return -ENOMEM;
 	usb_dev->core = core;
 
-	if (core->dev.of_node) {
+	if (core->dev.of_node)
 		usb_dev->gpio_desc = devm_gpiod_get(&core->dev, "vcc",
 						    GPIOD_OUT_HIGH);
-		if (IS_ERR(usb_dev->gpio_desc))
-			return PTR_ERR(usb_dev->gpio_desc);
-	}
 
 	switch (core->id.id) {
 	case BCMA_CORE_USB20_HOST:

[PATCH 5.14 018/162] binder: make sure fd closes complete

[Greg Kroah-Hartman]

From: Todd Kjos <tkjos@google.com>

commit 5fdb55c1ac9585eb23bb2541d5819224429e103d upstream.

During BC_FREE_BUFFER processing, the BINDER_TYPE_FDA object
cleanup may close 1 or more fds. The close operations are
completed using the task work mechanism -- which means the thread
needs to return to userspace or the file object may never be
dereferenced -- which can lead to hung processes.

Force the binder thread back to userspace if an fd is closed during
BC_FREE_BUFFER handling.

Fixes: 80cd795630d6 ("binder: fix use-after-free due to ksys_close() during fdget()")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Martijn Coenen <maco@android.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20210830195146.587206-1-tkjos@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/android/binder.c |   23 +++++++++++++++++------
 1 file changed, 17 insertions(+), 6 deletions(-)

--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -1852,6 +1852,7 @@ static void binder_deferred_fd_close(int
 }
 
 static void binder_transaction_buffer_release(struct binder_proc *proc,
+					      struct binder_thread *thread,
 					      struct binder_buffer *buffer,
 					      binder_size_t failed_at,
 					      bool is_failure)
@@ -2011,8 +2012,16 @@ static void binder_transaction_buffer_re
 						&proc->alloc, &fd, buffer,
 						offset, sizeof(fd));
 				WARN_ON(err);
-				if (!err)
+				if (!err) {
 					binder_deferred_fd_close(fd);
+					/*
+					 * Need to make sure the thread goes
+					 * back to userspace to complete the
+					 * deferred close
+					 */
+					if (thread)
+						thread->looper_need_return = true;
+				}
 			}
 		} break;
 		default:
@@ -3105,7 +3114,7 @@ err_bad_parent:
 err_copy_data_failed:
 	binder_free_txn_fixups(t);
 	trace_binder_transaction_failed_buffer_release(t->buffer);
-	binder_transaction_buffer_release(target_proc, t->buffer,
+	binder_transaction_buffer_release(target_proc, NULL, t->buffer,
 					  buffer_offset, true);
 	if (target_node)
 		binder_dec_node_tmpref(target_node);
@@ -3184,7 +3193,9 @@ err_invalid_target_handle:
  * Cleanup buffer and free it.
  */
 static void
-binder_free_buf(struct binder_proc *proc, struct binder_buffer *buffer)
+binder_free_buf(struct binder_proc *proc,
+		struct binder_thread *thread,
+		struct binder_buffer *buffer)
 {
 	binder_inner_proc_lock(proc);
 	if (buffer->transaction) {
@@ -3212,7 +3223,7 @@ binder_free_buf(struct binder_proc *proc
 		binder_node_inner_unlock(buf_node);
 	}
 	trace_binder_transaction_buffer_release(buffer);
-	binder_transaction_buffer_release(proc, buffer, 0, false);
+	binder_transaction_buffer_release(proc, thread, buffer, 0, false);
 	binder_alloc_free_buf(&proc->alloc, buffer);
 }
 
@@ -3414,7 +3425,7 @@ static int binder_thread_write(struct bi
 				     proc->pid, thread->pid, (u64)data_ptr,
 				     buffer->debug_id,
 				     buffer->transaction ? "active" : "finished");
-			binder_free_buf(proc, buffer);
+			binder_free_buf(proc, thread, buffer);
 			break;
 		}
 
@@ -4107,7 +4118,7 @@ retry:
 			buffer->transaction = NULL;
 			binder_cleanup_transaction(t, "fd fixups failed",
 						   BR_FAILED_REPLY);
-			binder_free_buf(proc, buffer);
+			binder_free_buf(proc, thread, buffer);
 			binder_debug(BINDER_DEBUG_FAILED_TRANSACTION,
 				     "%d:%d %stransaction %d fd fixups failed %d/%d, line %d\n",
 				     proc->pid, thread->pid,

[PATCH 5.14 019/162] binder: fix freeze race

[Greg Kroah-Hartman]

From: Li Li <dualli@google.com>

commit b564171ade70570b7f335fa8ed17adb28409e3ac upstream.

Currently cgroup freezer is used to freeze the application threads, and
BINDER_FREEZE is used to freeze the corresponding binder interface.
There's already a mechanism in ioctl(BINDER_FREEZE) to wait for any
existing transactions to drain out before actually freezing the binder
interface.

But freezing an app requires 2 steps, freezing the binder interface with
ioctl(BINDER_FREEZE) and then freezing the application main threads with
cgroupfs. This is not an atomic operation. The following race issue
might happen.

1) Binder interface is frozen by ioctl(BINDER_FREEZE);
2) Main thread A initiates a new sync binder transaction to process B;
3) Main thread A is frozen by "echo 1 > cgroup.freeze";
4) The response from process B reaches the frozen thread, which will
unexpectedly fail.

This patch provides a mechanism to check if there's any new pending
transaction happening between ioctl(BINDER_FREEZE) and freezing the
main thread. If there's any, the main thread freezing operation can
be rolled back to finish the pending transaction.

Furthermore, the response might reach the binder driver before the
rollback actually happens. That will still cause failed transaction.

As the other process doesn't wait for another response of the response,
the response transaction failure can be fixed by treating the response
transaction like an oneway/async one, allowing it to reach the frozen
thread. And it will be consumed when the thread gets unfrozen later.

NOTE: This patch reuses the existing definition of struct
binder_frozen_status_info but expands the bit assignments of __u32
member sync_recv.

To ensure backward compatibility, bit 0 of sync_recv still indicates
there's an outstanding sync binder transaction. This patch adds new
information to bit 1 of sync_recv, indicating the binder transaction
happens exactly when there's a race.

If an existing userspace app runs on a new kernel, a sync binder call
will set bit 0 of sync_recv so ioctl(BINDER_GET_FROZEN_INFO) still
return the expected value (true). The app just doesn't check bit 1
intentionally so it doesn't have the ability to tell if there's a race.
This behavior is aligned with what happens on an old kernel which
doesn't set bit 1 at all.

A new userspace app can 1) check bit 0 to know if there's a sync binder
transaction happened when being frozen - same as before; and 2) check
bit 1 to know if that sync binder transaction happened exactly when
there's a race - a new information for rollback decision.

the same time, confirmed the pending transactions succeeded.

Fixes: 432ff1e91694 ("binder: BINDER_FREEZE ioctl")
Acked-by: Todd Kjos <tkjos@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Li Li <dualli@google.com>
Test: stress test with apps being frozen and initiating binder calls at
Link: https://lore.kernel.org/r/20210910164210.2282716-2-dualli@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/android/binder.c            |   35 +++++++++++++++++++++++++++++------
 drivers/android/binder_internal.h   |    2 ++
 include/uapi/linux/android/binder.h |    7 +++++++
 3 files changed, 38 insertions(+), 6 deletions(-)

--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -3047,9 +3047,8 @@ static void binder_transaction(struct bi
 	if (reply) {
 		binder_enqueue_thread_work(thread, tcomplete);
 		binder_inner_proc_lock(target_proc);
-		if (target_thread->is_dead || target_proc->is_frozen) {
-			return_error = target_thread->is_dead ?
-				BR_DEAD_REPLY : BR_FROZEN_REPLY;
+		if (target_thread->is_dead) {
+			return_error = BR_DEAD_REPLY;
 			binder_inner_proc_unlock(target_proc);
 			goto err_dead_proc_or_thread;
 		}
@@ -4659,6 +4658,22 @@ static int binder_ioctl_get_node_debug_i
 	return 0;
 }
 
+static bool binder_txns_pending_ilocked(struct binder_proc *proc)
+{
+	struct rb_node *n;
+	struct binder_thread *thread;
+
+	if (proc->outstanding_txns > 0)
+		return true;
+
+	for (n = rb_first(&proc->threads); n; n = rb_next(n)) {
+		thread = rb_entry(n, struct binder_thread, rb_node);
+		if (thread->transaction_stack)
+			return true;
+	}
+	return false;
+}
+
 static int binder_ioctl_freeze(struct binder_freeze_info *info,
 			       struct binder_proc *target_proc)
 {
@@ -4690,8 +4705,13 @@ static int binder_ioctl_freeze(struct bi
 			(!target_proc->outstanding_txns),
 			msecs_to_jiffies(info->timeout_ms));
 
-	if (!ret && target_proc->outstanding_txns)
-		ret = -EAGAIN;
+	/* Check pending transactions that wait for reply */
+	if (ret >= 0) {
+		binder_inner_proc_lock(target_proc);
+		if (binder_txns_pending_ilocked(target_proc))
+			ret = -EAGAIN;
+		binder_inner_proc_unlock(target_proc);
+	}
 
 	if (ret < 0) {
 		binder_inner_proc_lock(target_proc);
@@ -4707,6 +4727,7 @@ static int binder_ioctl_get_freezer_info
 {
 	struct binder_proc *target_proc;
 	bool found = false;
+	__u32 txns_pending;
 
 	info->sync_recv = 0;
 	info->async_recv = 0;
@@ -4716,7 +4737,9 @@ static int binder_ioctl_get_freezer_info
 		if (target_proc->pid == info->pid) {
 			found = true;
 			binder_inner_proc_lock(target_proc);
-			info->sync_recv |= target_proc->sync_recv;
+			txns_pending = binder_txns_pending_ilocked(target_proc);
+			info->sync_recv |= target_proc->sync_recv |
+					(txns_pending << 1);
 			info->async_recv |= target_proc->async_recv;
 			binder_inner_proc_unlock(target_proc);
 		}
--- a/drivers/android/binder_internal.h
+++ b/drivers/android/binder_internal.h
@@ -378,6 +378,8 @@ struct binder_ref {
  *                        binder transactions
  *                        (protected by @inner_lock)
  * @sync_recv:            process received sync transactions since last frozen
+ *                        bit 0: received sync transaction after being frozen
+ *                        bit 1: new pending sync transaction during freezing
  *                        (protected by @inner_lock)
  * @async_recv:           process received async transactions since last frozen
  *                        (protected by @inner_lock)
--- a/include/uapi/linux/android/binder.h
+++ b/include/uapi/linux/android/binder.h
@@ -225,7 +225,14 @@ struct binder_freeze_info {
 
 struct binder_frozen_status_info {
 	__u32            pid;
+
+	/* process received sync transactions since last frozen
+	 * bit 0: received sync transaction after being frozen
+	 * bit 1: new pending sync transaction during freezing
+	 */
 	__u32            sync_recv;
+
+	/* process received async transactions since last frozen */
 	__u32            async_recv;
 };
 

[PATCH 5.14 020/162] staging: greybus: uart: fix tty use after free

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 92dc0b1f46e12cfabd28d709bb34f7a39431b44f upstream.

User space can hold a tty open indefinitely and tty drivers must not
release the underlying structures until the last user is gone.

Switch to using the tty-port reference counter to manage the life time
of the greybus tty state to avoid use after free after a disconnect.

Fixes: a18e15175708 ("greybus: more uart work")
Cc: stable@vger.kernel.org      # 4.9
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210906124538.22358-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/greybus/uart.c |   62 +++++++++++++++++++++--------------------
 1 file changed, 32 insertions(+), 30 deletions(-)

--- a/drivers/staging/greybus/uart.c
+++ b/drivers/staging/greybus/uart.c
@@ -761,6 +761,17 @@ out:
 	gbphy_runtime_put_autosuspend(gb_tty->gbphy_dev);
 }
 
+static void gb_tty_port_destruct(struct tty_port *port)
+{
+	struct gb_tty *gb_tty = container_of(port, struct gb_tty, port);
+
+	if (gb_tty->minor != GB_NUM_MINORS)
+		release_minor(gb_tty);
+	kfifo_free(&gb_tty->write_fifo);
+	kfree(gb_tty->buffer);
+	kfree(gb_tty);
+}
+
 static const struct tty_operations gb_ops = {
 	.install =		gb_tty_install,
 	.open =			gb_tty_open,
@@ -786,6 +797,7 @@ static const struct tty_port_operations
 	.dtr_rts =		gb_tty_dtr_rts,
 	.activate =		gb_tty_port_activate,
 	.shutdown =		gb_tty_port_shutdown,
+	.destruct =		gb_tty_port_destruct,
 };
 
 static int gb_uart_probe(struct gbphy_device *gbphy_dev,
@@ -798,17 +810,11 @@ static int gb_uart_probe(struct gbphy_de
 	int retval;
 	int minor;
 
-	gb_tty = kzalloc(sizeof(*gb_tty), GFP_KERNEL);
-	if (!gb_tty)
-		return -ENOMEM;
-
 	connection = gb_connection_create(gbphy_dev->bundle,
 					  le16_to_cpu(gbphy_dev->cport_desc->id),
 					  gb_uart_request_handler);
-	if (IS_ERR(connection)) {
-		retval = PTR_ERR(connection);
-		goto exit_tty_free;
-	}
+	if (IS_ERR(connection))
+		return PTR_ERR(connection);
 
 	max_payload = gb_operation_get_payload_size_max(connection);
 	if (max_payload < sizeof(struct gb_uart_send_data_request)) {
@@ -816,13 +822,23 @@ static int gb_uart_probe(struct gbphy_de
 		goto exit_connection_destroy;
 	}
 
+	gb_tty = kzalloc(sizeof(*gb_tty), GFP_KERNEL);
+	if (!gb_tty) {
+		retval = -ENOMEM;
+		goto exit_connection_destroy;
+	}
+
+	tty_port_init(&gb_tty->port);
+	gb_tty->port.ops = &gb_port_ops;
+	gb_tty->minor = GB_NUM_MINORS;
+
 	gb_tty->buffer_payload_max = max_payload -
 			sizeof(struct gb_uart_send_data_request);
 
 	gb_tty->buffer = kzalloc(gb_tty->buffer_payload_max, GFP_KERNEL);
 	if (!gb_tty->buffer) {
 		retval = -ENOMEM;
-		goto exit_connection_destroy;
+		goto exit_put_port;
 	}
 
 	INIT_WORK(&gb_tty->tx_work, gb_uart_tx_write_work);
@@ -830,7 +846,7 @@ static int gb_uart_probe(struct gbphy_de
 	retval = kfifo_alloc(&gb_tty->write_fifo, GB_UART_WRITE_FIFO_SIZE,
 			     GFP_KERNEL);
 	if (retval)
-		goto exit_buf_free;
+		goto exit_put_port;
 
 	gb_tty->credits = GB_UART_FIRMWARE_CREDITS;
 	init_completion(&gb_tty->credits_complete);
@@ -844,7 +860,7 @@ static int gb_uart_probe(struct gbphy_de
 		} else {
 			retval = minor;
 		}
-		goto exit_kfifo_free;
+		goto exit_put_port;
 	}
 
 	gb_tty->minor = minor;
@@ -853,9 +869,6 @@ static int gb_uart_probe(struct gbphy_de
 	init_waitqueue_head(&gb_tty->wioctl);
 	mutex_init(&gb_tty->mutex);
 
-	tty_port_init(&gb_tty->port);
-	gb_tty->port.ops = &gb_port_ops;
-
 	gb_tty->connection = connection;
 	gb_tty->gbphy_dev = gbphy_dev;
 	gb_connection_set_data(connection, gb_tty);
@@ -863,7 +876,7 @@ static int gb_uart_probe(struct gbphy_de
 
 	retval = gb_connection_enable_tx(connection);
 	if (retval)
-		goto exit_release_minor;
+		goto exit_put_port;
 
 	send_control(gb_tty, gb_tty->ctrlout);
 
@@ -890,16 +903,10 @@ static int gb_uart_probe(struct gbphy_de
 
 exit_connection_disable:
 	gb_connection_disable(connection);
-exit_release_minor:
-	release_minor(gb_tty);
-exit_kfifo_free:
-	kfifo_free(&gb_tty->write_fifo);
-exit_buf_free:
-	kfree(gb_tty->buffer);
+exit_put_port:
+	tty_port_put(&gb_tty->port);
 exit_connection_destroy:
 	gb_connection_destroy(connection);
-exit_tty_free:
-	kfree(gb_tty);
 
 	return retval;
 }
@@ -930,15 +937,10 @@ static void gb_uart_remove(struct gbphy_
 	gb_connection_disable_rx(connection);
 	tty_unregister_device(gb_tty_driver, gb_tty->minor);
 
-	/* FIXME - free transmit / receive buffers */
-
 	gb_connection_disable(connection);
-	tty_port_destroy(&gb_tty->port);
 	gb_connection_destroy(connection);
-	release_minor(gb_tty);
-	kfifo_free(&gb_tty->write_fifo);
-	kfree(gb_tty->buffer);
-	kfree(gb_tty);
+
+	tty_port_put(&gb_tty->port);
 }
 
 static int gb_tty_init(void)

[PATCH 5.14 021/162] usb: isp1760: do not sleep in field register poll

[Greg Kroah-Hartman]

From: Rui Miguel Silva <rui.silva@linaro.org>

commit 41f673183862a183d4ea0522c045fabfbd1b28c8 upstream.

When polling for a setup or clear of a register field we were sleeping
in atomic context but using a very tight sleep interval.

Since the use cases for this poll mechanism are only in setup and
stop paths, and in practice this poll is not used most of the times
but needs to be there to comply to hardware setup times, remove the
sleep time and make the poll loop tighter.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Link: https://lore.kernel.org/r/20210727100516.4190681-3-rui.silva@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/isp1760/isp1760-hcd.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/usb/isp1760/isp1760-hcd.c
+++ b/drivers/usb/isp1760/isp1760-hcd.c
@@ -251,7 +251,7 @@ static int isp1760_hcd_set_and_wait(stru
 	isp1760_hcd_set(hcd, field);
 
 	return regmap_field_read_poll_timeout(priv->fields[field], val,
-					      val, 10, timeout_us);
+					      val, 0, timeout_us);
 }
 
 static int isp1760_hcd_set_and_wait_swap(struct usb_hcd *hcd, u32 field,
@@ -263,7 +263,7 @@ static int isp1760_hcd_set_and_wait_swap
 	isp1760_hcd_set(hcd, field);
 
 	return regmap_field_read_poll_timeout(priv->fields[field], val,
-					      !val, 10, timeout_us);
+					      !val, 0, timeout_us);
 }
 
 static int isp1760_hcd_clear_and_wait(struct usb_hcd *hcd, u32 field,
@@ -275,7 +275,7 @@ static int isp1760_hcd_clear_and_wait(st
 	isp1760_hcd_clear(hcd, field);
 
 	return regmap_field_read_poll_timeout(priv->fields[field], val,
-					      !val, 10, timeout_us);
+					      !val, 0, timeout_us);
 }
 
 static bool isp1760_hcd_is_set(struct usb_hcd *hcd, u32 field)

[PATCH 5.14 022/162] Re-enable UAS for LaCie Rugged USB3-FW with fk quirk

[Greg Kroah-Hartman]

From: Julian Sikorski <belegdol@gmail.com>

commit ce1c42b4dacfe7d71c852d8bf3371067ccba865c upstream.

Further testing has revealed that LaCie Rugged USB3-FW does work with
uas as long as US_FL_NO_REPORT_OPCODES and US_FL_NO_SAME are enabled.

Link: https://lore.kernel.org/linux-usb/2167ea48-e273-a336-a4e0-10a4e883e75e@redhat.com/
Cc: stable <stable@vger.kernel.org>
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Julian Sikorski <belegdol+github@gmail.com>
Link: https://lore.kernel.org/r/20210913181454.7365-1-belegdol+github@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/storage/unusual_uas.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -50,7 +50,7 @@ UNUSUAL_DEV(0x059f, 0x1061, 0x0000, 0x99
 		"LaCie",
 		"Rugged USB3-FW",
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
-		US_FL_IGNORE_UAS),
+		US_FL_NO_REPORT_OPCODES | US_FL_NO_SAME),
 
 /*
  * Apricorn USB3 dongle sometimes returns "USBSUSBSUSBS" in response to SCSI

[PATCH 5.14 023/162] usb: dwc3: core: balance phy init and exit

[Greg Kroah-Hartman]

From: Li Jun <jun.li@nxp.com>

commit 8cfac9a6744fcb143cb3e94ce002f09fd17fadbb upstream.

After we start to do core soft reset while usb role switch,
the phy init is invoked at every switch to device mode, but
its counter part de-init is missing, this causes the actual
phy init can not be done when we really want to re-init phy
like system resume, because the counter maintained by phy
core is not 0. considering phy init is actually redundant for
role switch, so move out the phy init from core soft reset to
dwc3 core init where is the only place required.

Fixes: f88359e1588b ("usb: dwc3: core: Do core softreset when switch mode")
Cc: <stable@vger.kernel.org>
Tested-by: faqiang.zhu <faqiang.zhu@nxp.com>
Tested-by: John Stultz <john.stultz@linaro.org> #HiKey960
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Li Jun <jun.li@nxp.com>
Link: https://lore.kernel.org/r/1631068099-13559-1-git-send-email-jun.li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/core.c |   30 +++++++++++++-----------------
 1 file changed, 13 insertions(+), 17 deletions(-)

--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -264,19 +264,6 @@ static int dwc3_core_soft_reset(struct d
 {
 	u32		reg;
 	int		retries = 1000;
-	int		ret;
-
-	usb_phy_init(dwc->usb2_phy);
-	usb_phy_init(dwc->usb3_phy);
-	ret = phy_init(dwc->usb2_generic_phy);
-	if (ret < 0)
-		return ret;
-
-	ret = phy_init(dwc->usb3_generic_phy);
-	if (ret < 0) {
-		phy_exit(dwc->usb2_generic_phy);
-		return ret;
-	}
 
 	/*
 	 * We're resetting only the device side because, if we're in host mode,
@@ -310,9 +297,6 @@ static int dwc3_core_soft_reset(struct d
 			udelay(1);
 	} while (--retries);
 
-	phy_exit(dwc->usb3_generic_phy);
-	phy_exit(dwc->usb2_generic_phy);
-
 	return -ETIMEDOUT;
 
 done:
@@ -982,9 +966,21 @@ static int dwc3_core_init(struct dwc3 *d
 		dwc->phys_ready = true;
 	}
 
+	usb_phy_init(dwc->usb2_phy);
+	usb_phy_init(dwc->usb3_phy);
+	ret = phy_init(dwc->usb2_generic_phy);
+	if (ret < 0)
+		goto err0a;
+
+	ret = phy_init(dwc->usb3_generic_phy);
+	if (ret < 0) {
+		phy_exit(dwc->usb2_generic_phy);
+		goto err0a;
+	}
+
 	ret = dwc3_core_soft_reset(dwc);
 	if (ret)
-		goto err0a;
+		goto err1;
 
 	if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD &&
 	    !DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) {

[PATCH 5.14 024/162] usb: cdns3: fix race condition before setting doorbell

[Greg Kroah-Hartman]

From: Pawel Laszczak <pawell@cadence.com>

commit b69ec50b3e55c4b2a85c8bc46763eaf330605847 upstream.

For DEV_VER_V3 version there exist race condition between clearing
ep_sts.EP_STS_TRBERR and setting ep_cmd.EP_CMD_DRDY bit.
Setting EP_CMD_DRDY will be ignored by controller when
EP_STS_TRBERR is set. So, between these two instructions we have
a small time gap in which the EP_STSS_TRBERR can be set. In such case
the transfer will not start after setting doorbell.

Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
cc: <stable@vger.kernel.org> # 5.12.x
Tested-by: Aswath Govindraju <a-govindraju@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20210907062619.34622-1-pawell@gli-login.cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/cdns3/cdns3-gadget.c |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

--- a/drivers/usb/cdns3/cdns3-gadget.c
+++ b/drivers/usb/cdns3/cdns3-gadget.c
@@ -1100,6 +1100,19 @@ static int cdns3_ep_run_stream_transfer(
 	return 0;
 }
 
+static void cdns3_rearm_drdy_if_needed(struct cdns3_endpoint *priv_ep)
+{
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+
+	if (priv_dev->dev_ver < DEV_VER_V3)
+		return;
+
+	if (readl(&priv_dev->regs->ep_sts) & EP_STS_TRBERR) {
+		writel(EP_STS_TRBERR, &priv_dev->regs->ep_sts);
+		writel(EP_CMD_DRDY, &priv_dev->regs->ep_cmd);
+	}
+}
+
 /**
  * cdns3_ep_run_transfer - start transfer on no-default endpoint hardware
  * @priv_ep: endpoint object
@@ -1351,6 +1364,7 @@ static int cdns3_ep_run_transfer(struct
 		/*clearing TRBERR and EP_STS_DESCMIS before seting DRDY*/
 		writel(EP_STS_TRBERR | EP_STS_DESCMIS, &priv_dev->regs->ep_sts);
 		writel(EP_CMD_DRDY, &priv_dev->regs->ep_cmd);
+		cdns3_rearm_drdy_if_needed(priv_ep);
 		trace_cdns3_doorbell_epx(priv_ep->name,
 					 readl(&priv_dev->regs->ep_traddr));
 	}

[PATCH 5.14 025/162] usb: core: hcd: Add support for deferring roothub registration

[Greg Kroah-Hartman]

From: Kishon Vijay Abraham I <kishon@ti.com>

commit 58877b0824da15698bd85a0a9dbfa8c354e6ecb7 upstream.

It has been observed with certain PCIe USB cards (like Inateck connected
to AM64 EVM or J7200 EVM) that as soon as the primary roothub is
registered, port status change is handled even before xHC is running
leading to cold plug USB devices not detected. For such cases, registering
both the root hubs along with the second HCD is required. Add support for
deferring roothub registration in usb_add_hcd(), so that both primary and
secondary roothubs are registered along with the second HCD.

CC: stable@vger.kernel.org # 5.4+
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Tested-by: Chris Chiu <chris.chiu@canonical.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20210909064200.16216-2-kishon@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/core/hcd.c  |   29 +++++++++++++++++++++++------
 include/linux/usb/hcd.h |    2 ++
 2 files changed, 25 insertions(+), 6 deletions(-)

--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2775,6 +2775,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
 {
 	int retval;
 	struct usb_device *rhdev;
+	struct usb_hcd *shared_hcd;
 
 	if (!hcd->skip_phy_initialization && usb_hcd_is_primary_hcd(hcd)) {
 		hcd->phy_roothub = usb_phy_roothub_alloc(hcd->self.sysdev);
@@ -2935,13 +2936,26 @@ int usb_add_hcd(struct usb_hcd *hcd,
 		goto err_hcd_driver_start;
 	}
 
+	/* starting here, usbcore will pay attention to the shared HCD roothub */
+	shared_hcd = hcd->shared_hcd;
+	if (!usb_hcd_is_primary_hcd(hcd) && shared_hcd && HCD_DEFER_RH_REGISTER(shared_hcd)) {
+		retval = register_root_hub(shared_hcd);
+		if (retval != 0)
+			goto err_register_root_hub;
+
+		if (shared_hcd->uses_new_polling && HCD_POLL_RH(shared_hcd))
+			usb_hcd_poll_rh_status(shared_hcd);
+	}
+
 	/* starting here, usbcore will pay attention to this root hub */
-	retval = register_root_hub(hcd);
-	if (retval != 0)
-		goto err_register_root_hub;
+	if (!HCD_DEFER_RH_REGISTER(hcd)) {
+		retval = register_root_hub(hcd);
+		if (retval != 0)
+			goto err_register_root_hub;
 
-	if (hcd->uses_new_polling && HCD_POLL_RH(hcd))
-		usb_hcd_poll_rh_status(hcd);
+		if (hcd->uses_new_polling && HCD_POLL_RH(hcd))
+			usb_hcd_poll_rh_status(hcd);
+	}
 
 	return retval;
 
@@ -2985,6 +2999,7 @@ EXPORT_SYMBOL_GPL(usb_add_hcd);
 void usb_remove_hcd(struct usb_hcd *hcd)
 {
 	struct usb_device *rhdev = hcd->self.root_hub;
+	bool rh_registered;
 
 	dev_info(hcd->self.controller, "remove, state %x\n", hcd->state);
 
@@ -2995,6 +3010,7 @@ void usb_remove_hcd(struct usb_hcd *hcd)
 
 	dev_dbg(hcd->self.controller, "roothub graceful disconnect\n");
 	spin_lock_irq (&hcd_root_hub_lock);
+	rh_registered = hcd->rh_registered;
 	hcd->rh_registered = 0;
 	spin_unlock_irq (&hcd_root_hub_lock);
 
@@ -3004,7 +3020,8 @@ void usb_remove_hcd(struct usb_hcd *hcd)
 	cancel_work_sync(&hcd->died_work);
 
 	mutex_lock(&usb_bus_idr_lock);
-	usb_disconnect(&rhdev);		/* Sets rhdev to NULL */
+	if (rh_registered)
+		usb_disconnect(&rhdev);		/* Sets rhdev to NULL */
 	mutex_unlock(&usb_bus_idr_lock);
 
 	/*
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -124,6 +124,7 @@ struct usb_hcd {
 #define HCD_FLAG_RH_RUNNING		5	/* root hub is running? */
 #define HCD_FLAG_DEAD			6	/* controller has died? */
 #define HCD_FLAG_INTF_AUTHORIZED	7	/* authorize interfaces? */
+#define HCD_FLAG_DEFER_RH_REGISTER	8	/* Defer roothub registration */
 
 	/* The flags can be tested using these macros; they are likely to
 	 * be slightly faster than test_bit().
@@ -134,6 +135,7 @@ struct usb_hcd {
 #define HCD_WAKEUP_PENDING(hcd)	((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING))
 #define HCD_RH_RUNNING(hcd)	((hcd)->flags & (1U << HCD_FLAG_RH_RUNNING))
 #define HCD_DEAD(hcd)		((hcd)->flags & (1U << HCD_FLAG_DEAD))
+#define HCD_DEFER_RH_REGISTER(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEFER_RH_REGISTER))
 
 	/*
 	 * Specifies if interfaces are authorized by default

[PATCH 5.14 026/162] USB: serial: mos7840: remove duplicated 0xac24 device ID

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

commit 211f323768a25b30c106fd38f15a0f62c7c2b5f4 upstream.

0xac24 device ID is already defined and used via
BANDB_DEVICE_ID_USO9ML2_4.  Remove the duplicate from the list.

Fixes: 27f1281d5f72 ("USB: serial: Extra device/vendor ID for mos7840 driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/mos7840.c |    2 --
 1 file changed, 2 deletions(-)

--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -107,7 +107,6 @@
 #define BANDB_DEVICE_ID_USOPTL4_2P       0xBC02
 #define BANDB_DEVICE_ID_USOPTL4_4        0xAC44
 #define BANDB_DEVICE_ID_USOPTL4_4P       0xBC03
-#define BANDB_DEVICE_ID_USOPTL2_4        0xAC24
 
 /* Interrupt Routine Defines    */
 
@@ -186,7 +185,6 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2P) },
 	{ USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4) },
 	{ USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4P) },
-	{ USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4) },
 	{}			/* terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, id_table);

[PATCH 5.14 027/162] USB: serial: option: add Telit LN920 compositions

[Greg Kroah-Hartman]

From: Carlo Lobrano <c.lobrano@gmail.com>

commit 7bb057134d609b9c038a00b6876cf0d37d0118ce upstream.

This patch adds the following Telit LN920 compositions:

0x1060: tty, adb, rmnet, tty, tty, tty, tty
0x1061: tty, adb, mbim, tty, tty, tty, tty
0x1062: rndis, tty, adb, tty, tty, tty, tty
0x1063: tty, adb, ecm, tty, tty, tty, tty

Signed-off-by: Carlo Lobrano <c.lobrano@gmail.com>
Link: https://lore.kernel.org/r/20210903123913.1086513-1-c.lobrano@gmail.com
Reviewed-by: Daniele Palmas <dnlplm@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1205,6 +1205,14 @@ static const struct usb_device_id option
 	  .driver_info = NCTRL(0) | RSVD(1) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1056, 0xff),	/* Telit FD980 */
 	  .driver_info = NCTRL(2) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1060, 0xff),	/* Telit LN920 (rmnet) */
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1061, 0xff),	/* Telit LN920 (MBIM) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1062, 0xff),	/* Telit LN920 (RNDIS) */
+	  .driver_info = NCTRL(2) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1063, 0xff),	/* Telit LN920 (ECM) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),

[PATCH 5.14 028/162] USB: serial: option: remove duplicate USB device ID

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

commit 1ca200a8c6f079950a04ea3c3380fe8cf78e95a2 upstream.

The device ZTE 0x0094 is already on the list.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Fixes: b9e44fe5ecda ("USB: option: cleanup zte 3g-dongle's pid in option.c")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1658,7 +1658,6 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0060, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff),
 	  .driver_info = RSVD(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff),

[PATCH 5.14 029/162] USB: serial: option: add device id for Foxconn T99W265

[Greg Kroah-Hartman]

From: Slark Xiao <slark_xiao@163.com>

commit 9e3eed534f8235a4a596a9dae5b8a6425d81ea1a upstream.

Adding support for Foxconn device T99W265 for enumeration with
PID 0xe0db.

usb-devices output for 0xe0db
T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 19 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=0489 ProdID=e0db Rev=05.04
S:  Manufacturer=Microsoft
S:  Product=Generic Mobile Broadband Adapter
S:  SerialNumber=6c50f452
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

if0/1: MBIM, if2:Diag, if3:GNSS, if4: Modem

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20210917110106.9852-1-slark_xiao@163.com
[ johan: use USB_DEVICE_INTERFACE_CLASS(), amend comment ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2075,6 +2075,8 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
 	{ USB_DEVICE(0x0489, 0xe0b5),						/* Foxconn T77W968 ESIM */
 	  .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0db, 0xff),			/* Foxconn T99W265 MBIM */
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE(0x1508, 0x1001),						/* Fibocom NL668 (IOT version) */
 	  .driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
 	{ USB_DEVICE(0x2cb7, 0x0104),						/* Fibocom NL678 series */

[PATCH 5.14 030/162] misc: bcm-vk: fix tty registration race

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit d9d1232b48344c6c72dbdf89fae1e7638e5df757 upstream.

Make sure to set the tty class-device driver data before registering the
tty to avoid having a racing open() dereference a NULL pointer.

Fixes: 91ca10d6fa07 ("misc: bcm-vk: add ttyVK support")
Cc: stable@vger.kernel.org      # 5.12
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210917115736.5816-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/misc/bcm-vk/bcm_vk_tty.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/misc/bcm-vk/bcm_vk_tty.c
+++ b/drivers/misc/bcm-vk/bcm_vk_tty.c
@@ -267,13 +267,13 @@ int bcm_vk_tty_init(struct bcm_vk *vk, c
 		struct device *tty_dev;
 
 		tty_port_init(&vk->tty[i].port);
-		tty_dev = tty_port_register_device(&vk->tty[i].port, tty_drv,
-						   i, dev);
+		tty_dev = tty_port_register_device_attr(&vk->tty[i].port,
+							tty_drv, i, dev, vk,
+							NULL);
 		if (IS_ERR(tty_dev)) {
 			err = PTR_ERR(tty_dev);
 			goto unwind;
 		}
-		dev_set_drvdata(tty_dev, vk);
 		vk->tty[i].is_opened = false;
 	}
 

[PATCH 5.14 031/162] misc: genwqe: Fixes DMA mask setting

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

commit 8d753db5c227d1f403c4bc9cae4ae02c862413cd upstream.

Commit 505b08777d78 ("misc: genwqe: Use dma_set_mask_and_coherent to simplify code")
changed the logic in the code.

Instead of a ||, a && should have been used to keep the code the same.

Fixes: 505b08777d78 ("misc: genwqe: Use dma_set_mask_and_coherent to simplify code")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/be49835baa8ba6daba5813b399edf6300f7fdbda.1631130862.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/misc/genwqe/card_base.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/misc/genwqe/card_base.c
+++ b/drivers/misc/genwqe/card_base.c
@@ -1090,7 +1090,7 @@ static int genwqe_pci_setup(struct genwq
 
 	/* check for 64-bit DMA address supported (DAC) */
 	/* check for 32-bit DMA address supported (SAC) */
-	if (dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(64)) ||
+	if (dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(64)) &&
 	    dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(32))) {
 		dev_err(&pci_dev->dev,
 			"err: neither DMA32 nor DMA64 supported\n");

[PATCH 5.14 032/162] mcb: fix error handling in mcb_alloc_bus()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 25a1433216489de4abc889910f744e952cb6dbae upstream.

There are two bugs:
1) If ida_simple_get() fails then this code calls put_device(carrier)
   but we haven't yet called get_device(carrier) and probably that
   leads to a use after free.
2) After device_initialize() then we need to use put_device() to
   release the bus.  This will free the internal resources tied to the
   device and call mcb_free_bus() which will free the rest.

Fixes: 5d9e2ab9fea4 ("mcb: Implement bus->dev.release callback")
Fixes: 18d288198099 ("mcb: Correctly initialize the bus's device")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/32e160cf6864ce77f9d62948338e24db9fd8ead9.1630931319.git.johannes.thumshirn@wdc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mcb/mcb-core.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/drivers/mcb/mcb-core.c
+++ b/drivers/mcb/mcb-core.c
@@ -277,8 +277,8 @@ struct mcb_bus *mcb_alloc_bus(struct dev
 
 	bus_nr = ida_simple_get(&mcb_ida, 0, 0, GFP_KERNEL);
 	if (bus_nr < 0) {
-		rc = bus_nr;
-		goto err_free;
+		kfree(bus);
+		return ERR_PTR(bus_nr);
 	}
 
 	bus->bus_nr = bus_nr;
@@ -293,12 +293,12 @@ struct mcb_bus *mcb_alloc_bus(struct dev
 	dev_set_name(&bus->dev, "mcb:%d", bus_nr);
 	rc = device_add(&bus->dev);
 	if (rc)
-		goto err_free;
+		goto err_put;
 
 	return bus;
-err_free:
-	put_device(carrier);
-	kfree(bus);
+
+err_put:
+	put_device(&bus->dev);
 	return ERR_PTR(rc);
 }
 EXPORT_SYMBOL_NS_GPL(mcb_alloc_bus, MCB);

[PATCH 5.14 033/162] KVM: rseq: Update rseq when processing NOTIFY_RESUME on xfer to KVM guest

[Greg Kroah-Hartman]

From: Sean Christopherson <seanjc@google.com>

commit 8646e53633f314e4d746a988240d3b951a92f94a upstream.

Invoke rseq's NOTIFY_RESUME handler when processing the flag prior to
transferring to a KVM guest, which is roughly equivalent to an exit to
userspace and processes many of the same pending actions.  While the task
cannot be in an rseq critical section as the KVM path is reachable only
by via ioctl(KVM_RUN), the side effects that apply to rseq outside of a
critical section still apply, e.g. the current CPU needs to be updated if
the task is migrated.

Clearing TIF_NOTIFY_RESUME without informing rseq can lead to segfaults
and other badness in userspace VMMs that use rseq in combination with KVM,
e.g. due to the CPU ID being stale after task migration.

Fixes: 72c3c0fe54a3 ("x86/kvm: Use generic xfer to guest work function")
Reported-by: Peter Foley <pefoley@google.com>
Bisected-by: Doug Evans <dje@google.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210901203030.1292304-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/entry/kvm.c |    4 +++-
 kernel/rseq.c      |   14 +++++++++++---
 2 files changed, 14 insertions(+), 4 deletions(-)

--- a/kernel/entry/kvm.c
+++ b/kernel/entry/kvm.c
@@ -19,8 +19,10 @@ static int xfer_to_guest_mode_work(struc
 		if (ti_work & _TIF_NEED_RESCHED)
 			schedule();
 
-		if (ti_work & _TIF_NOTIFY_RESUME)
+		if (ti_work & _TIF_NOTIFY_RESUME) {
 			tracehook_notify_resume(NULL);
+			rseq_handle_notify_resume(NULL, NULL);
+		}
 
 		ret = arch_xfer_to_guest_mode_handle_work(vcpu, ti_work);
 		if (ret)
--- a/kernel/rseq.c
+++ b/kernel/rseq.c
@@ -282,9 +282,17 @@ void __rseq_handle_notify_resume(struct
 
 	if (unlikely(t->flags & PF_EXITING))
 		return;
-	ret = rseq_ip_fixup(regs);
-	if (unlikely(ret < 0))
-		goto error;
+
+	/*
+	 * regs is NULL if and only if the caller is in a syscall path.  Skip
+	 * fixup and leave rseq_cs as is so that rseq_sycall() will detect and
+	 * kill a misbehaving userspace on debug kernels.
+	 */
+	if (regs) {
+		ret = rseq_ip_fixup(regs);
+		if (unlikely(ret < 0))
+			goto error;
+	}
 	if (unlikely(rseq_update_cpu_id(t)))
 		goto error;
 	return;

[PATCH 5.14 034/162] erofs: fix up erofs_lookup tracepoint

[Greg Kroah-Hartman]

From: Gao Xiang <hsiangkao@linux.alibaba.com>

commit 93368aab0efc87288cac65e99c9ed2e0ffc9e7d0 upstream.

Fix up a misuse that the filename pointer isn't always valid in
the ring buffer, and we should copy the content instead.

Link: https://lore.kernel.org/r/20210921143531.81356-1-hsiangkao@linux.alibaba.com
Fixes: 13f06f48f7bf ("staging: erofs: support tracepoint")
Cc: stable@vger.kernel.org # 4.19+
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/trace/events/erofs.h |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/include/trace/events/erofs.h
+++ b/include/trace/events/erofs.h
@@ -35,20 +35,20 @@ TRACE_EVENT(erofs_lookup,
 	TP_STRUCT__entry(
 		__field(dev_t,		dev	)
 		__field(erofs_nid_t,	nid	)
-		__field(const char *,	name	)
+		__string(name,		dentry->d_name.name	)
 		__field(unsigned int,	flags	)
 	),
 
 	TP_fast_assign(
 		__entry->dev	= dir->i_sb->s_dev;
 		__entry->nid	= EROFS_I(dir)->nid;
-		__entry->name	= dentry->d_name.name;
+		__assign_str(name, dentry->d_name.name);
 		__entry->flags	= flags;
 	),
 
 	TP_printk("dev = (%d,%d), pnid = %llu, name:%s, flags:%x",
 		show_dev_nid(__entry),
-		__entry->name,
+		__get_str(name),
 		__entry->flags)
 );
 

[PATCH 5.14 035/162] nexthop: Fix division by zero while replacing a resilient group

[Greg Kroah-Hartman]

From: Ido Schimmel <idosch@nvidia.com>

commit 563f23b002534176f49524b5ca0e1d94d8906c40 upstream.

The resilient nexthop group torture tests in fib_nexthop.sh exposed a
possible division by zero while replacing a resilient group [1]. The
division by zero occurs when the data path sees a resilient nexthop
group with zero buckets.

The tests replace a resilient nexthop group in a loop while traffic is
forwarded through it. The tests do not specify the number of buckets
while performing the replacement, resulting in the kernel allocating a
stub resilient table (i.e, 'struct nh_res_table') with zero buckets.

This table should never be visible to the data path, but the old nexthop
group (i.e., 'oldg') might still be used by the data path when the stub
table is assigned to it.

Fix this by only assigning the stub table to the old nexthop group after
making sure the group is no longer used by the data path.

Tested with fib_nexthops.sh:

Tests passed: 222
Tests failed:   0

[1]
 divide error: 0000 [#1] PREEMPT SMP KASAN
 CPU: 0 PID: 1850 Comm: ping Not tainted 5.14.0-custom-10271-ga86eb53057fe #1107
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014
 RIP: 0010:nexthop_select_path+0x2d2/0x1a80
[...]
 Call Trace:
  fib_select_multipath+0x79b/0x1530
  fib_select_path+0x8fb/0x1c10
  ip_route_output_key_hash_rcu+0x1198/0x2da0
  ip_route_output_key_hash+0x190/0x340
  ip_route_output_flow+0x21/0x120
  raw_sendmsg+0x91d/0x2e10
  inet_sendmsg+0x9e/0xe0
  __sys_sendto+0x23d/0x360
  __x64_sys_sendto+0xe1/0x1b0
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xae

Cc: stable@vger.kernel.org
Fixes: 283a72a5599e ("nexthop: Add implementation of resilient next-hop groups")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/nexthop.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/ipv4/nexthop.c
+++ b/net/ipv4/nexthop.c
@@ -1982,6 +1982,8 @@ static int replace_nexthop_grp(struct ne
 	rcu_assign_pointer(old->nh_grp, newg);
 
 	if (newg->resilient) {
+		/* Make sure concurrent readers are not using 'oldg' anymore. */
+		synchronize_net();
 		rcu_assign_pointer(oldg->res_table, tmp_table);
 		rcu_assign_pointer(oldg->spare->res_table, tmp_table);
 	}

[PATCH 5.14 036/162] btrfs: prevent __btrfs_dump_space_info() to underflow its free space

[Greg Kroah-Hartman]

From: Qu Wenruo <wqu@suse.com>

commit 0619b7901473c380abc05d45cf9c70bee0707db3 upstream.

It's not uncommon where __btrfs_dump_space_info() gets called
under over-commit situations.

In that case free space would underflow as total allocated space is not
enough to handle all the over-committed space.

Such underflow values can sometimes cause confusion for users enabled
enospc_debug mount option, and takes some seconds for developers to
convert the underflow value to signed result.

Just output the free space as s64 to avoid such problem.

Reported-by: Eli V <eliventer@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAJtFHUSy4zgyhf-4d9T+KdJp9w=UgzC2A0V=VtmaeEpcGgm1-Q@mail.gmail.com/
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/space-info.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/fs/btrfs/space-info.c
+++ b/fs/btrfs/space-info.c
@@ -414,9 +414,10 @@ static void __btrfs_dump_space_info(stru
 {
 	lockdep_assert_held(&info->lock);
 
-	btrfs_info(fs_info, "space_info %llu has %llu free, is %sfull",
+	/* The free space could be negative in case of overcommit */
+	btrfs_info(fs_info, "space_info %llu has %lld free, is %sfull",
 		   info->flags,
-		   info->total_bytes - btrfs_space_info_used(info, true),
+		   (s64)(info->total_bytes - btrfs_space_info_used(info, true)),
 		   info->full ? "" : "not ");
 	btrfs_info(fs_info,
 		"space_info total=%llu, used=%llu, pinned=%llu, reserved=%llu, may_use=%llu, readonly=%llu zone_unusable=%llu",

[PATCH 5.14 037/162] xhci: Set HCD flag to defer primary roothub registration

[Greg Kroah-Hartman]

From: Kishon Vijay Abraham I <kishon@ti.com>

commit b7a0a792f864583207c593b50fd1b752ed89f4c1 upstream.

Set "HCD_FLAG_DEFER_RH_REGISTER" to hcd->flags in xhci_run() to defer
registering primary roothub in usb_add_hcd(). This will make sure both
primary roothub and secondary roothub will be registered along with the
second HCD. This is required for cold plugged USB devices to be detected
in certain PCIe USB cards (like Inateck USB card connected to AM64 EVM
or J7200 EVM).

CC: stable@vger.kernel.org # 5.4+
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Tested-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20210909064200.16216-3-kishon@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -692,6 +692,7 @@ int xhci_run(struct usb_hcd *hcd)
 		if (ret)
 			xhci_free_command(xhci, command);
 	}
+	set_bit(HCD_FLAG_DEFER_RH_REGISTER, &hcd->flags);
 	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
 			"Finished xhci_run for USB2 roothub");
 

[PATCH 5.14 038/162] serial: 8250: 8250_omap: Fix RX_LVL register offset

[Greg Kroah-Hartman]

From: Nishanth Menon <nm@ti.com>

commit 79e9e30a9292a62d25ab75488d3886108db1eaad upstream.

Commit b67e830d38fa ("serial: 8250: 8250_omap: Fix possible interrupt
storm on K3 SoCs") introduced fixup including a register read to
RX_LVL, however, we should be using word offset than byte offset
since our registers are on 4 byte boundary (port.regshift = 2) for
8250_omap.

Fixes: b67e830d38fa ("serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs")
Cc: stable <stable@vger.kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210903050550.29050-1-nm@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_omap.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -106,7 +106,7 @@
 #define UART_OMAP_EFR2_TIMEOUT_BEHAVE	BIT(6)
 
 /* RX FIFO occupancy indicator */
-#define UART_OMAP_RX_LVL		0x64
+#define UART_OMAP_RX_LVL		0x19
 
 struct omap8250_priv {
 	int line;

[PATCH 5.14 039/162] serial: mvebu-uart: fix drivers tx_empty callback

[Greg Kroah-Hartman]

From: Pali Rohár <pali@kernel.org>

commit 74e1eb3b4a1ef2e564b4bdeb6e92afe844e900de upstream.

Driver's tx_empty callback should signal when the transmit shift register
is empty. So when the last character has been sent.

STAT_TX_FIFO_EMP bit signals only that HW transmit FIFO is empty, which
happens when the last byte is loaded into transmit shift register.

STAT_TX_EMP bit signals when the both HW transmit FIFO and transmit shift
register are empty.

So replace STAT_TX_FIFO_EMP check by STAT_TX_EMP in mvebu_uart_tx_empty()
callback function.

Fixes: 30530791a7a0 ("serial: mvebu-uart: initial support for Armada-3700 serial port")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20210911132017.25505-1-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/mvebu-uart.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/mvebu-uart.c
+++ b/drivers/tty/serial/mvebu-uart.c
@@ -163,7 +163,7 @@ static unsigned int mvebu_uart_tx_empty(
 	st = readl(port->membase + UART_STAT);
 	spin_unlock_irqrestore(&port->lock, flags);
 
-	return (st & STAT_TX_FIFO_EMP) ? TIOCSER_TEMT : 0;
+	return (st & STAT_TX_EMP) ? TIOCSER_TEMT : 0;
 }
 
 static unsigned int mvebu_uart_get_mctrl(struct uart_port *port)

[PATCH 5.14 040/162] scsi: sd_zbc: Ensure buffer size is aligned to SECTOR_SIZE

[Greg Kroah-Hartman]

From: Naohiro Aota <naohiro.aota@wdc.com>

commit 7215e909814fed7cda33c954943a4050d8348204 upstream.

Reporting zones on a SCSI device sometimes fail with the following error:

[76248.516390] ata16.00: invalid transfer count 131328
[76248.523618] sd 15:0:0:0: [sda] REPORT ZONES start lba 536870912 failed

The error (from drivers/ata/libata-scsi.c:ata_scsi_zbc_in_xlat()) indicates
that buffer size is not aligned to SECTOR_SIZE.

This happens when the __vmalloc() failed. Consider we are reporting 4096
zones, then we will have "bufsize = roundup((4096 + 1) * 64,
SECTOR_SIZE)" = (513 * 512) = 262656. Then, __vmalloc() failure halves
the bufsize to 131328, which is no longer aligned to SECTOR_SIZE.

Use rounddown() to ensure the size is always aligned to SECTOR_SIZE and fix
the comment as well.

Link: https://lore.kernel.org/r/20210906140642.2267569-1-naohiro.aota@wdc.com
Fixes: 23a50861adda ("scsi: sd_zbc: Cleanup sd_zbc_alloc_report_buffer()")
Cc: stable@vger.kernel.org # 5.5+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/sd_zbc.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/scsi/sd_zbc.c
+++ b/drivers/scsi/sd_zbc.c
@@ -154,8 +154,8 @@ static void *sd_zbc_alloc_report_buffer(
 
 	/*
 	 * Report zone buffer size should be at most 64B times the number of
-	 * zones requested plus the 64B reply header, but should be at least
-	 * SECTOR_SIZE for ATA devices.
+	 * zones requested plus the 64B reply header, but should be aligned
+	 * to SECTOR_SIZE for ATA devices.
 	 * Make sure that this size does not exceed the hardware capabilities.
 	 * Furthermore, since the report zone command cannot be split, make
 	 * sure that the allocated buffer can always be mapped by limiting the
@@ -174,7 +174,7 @@ static void *sd_zbc_alloc_report_buffer(
 			*buflen = bufsize;
 			return buf;
 		}
-		bufsize >>= 1;
+		bufsize = rounddown(bufsize >> 1, SECTOR_SIZE);
 	}
 
 	return NULL;

[PATCH 5.14 041/162] drm/amd/pm: Update intermediate power state for SI

[Greg Kroah-Hartman]

From: Lijo Lazar <lijo.lazar@amd.com>

commit ab39d3cef526ba09c4c6923b4cd7e6ec1c5d4faa upstream.

Update the current state as boot state during dpm initialization.
During the subsequent initialization, set_power_state gets called to
transition to the final power state. set_power_state refers to values
from the current state and without current state populated, it could
result in NULL pointer dereference.

For ex: on platforms where PCI speed change is supported through ACPI
ATCS method, the link speed of current state needs to be queried before
deciding on changing to final power state's link speed. The logic to query
ATCS-support was broken on certain platforms. The issue became visible
when broken ATCS-support logic got fixed with commit
f9b7f3703ff9 ("drm/amdgpu/acpi: make ATPX/ATCS structures global (v2)").

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1698

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/pm/powerplay/si_dpm.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/gpu/drm/amd/pm/powerplay/si_dpm.c
+++ b/drivers/gpu/drm/amd/pm/powerplay/si_dpm.c
@@ -6870,6 +6870,8 @@ static int si_dpm_enable(struct amdgpu_d
 	si_enable_auto_throttle_source(adev, AMDGPU_DPM_AUTO_THROTTLE_SRC_THERMAL, true);
 	si_thermal_start_thermal_controller(adev);
 
+	ni_update_current_ps(adev, boot_ps);
+
 	return 0;
 }
 

[PATCH 5.14 042/162] net: hso: fix muxed tty registration

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit e8f69b16ee776da88589b5271e3f46020efc8f6c upstream.

If resource allocation and registration fail for a muxed tty device
(e.g. if there are no more minor numbers) the driver should not try to
deregister the never-registered (or already-deregistered) tty.

Fix up the error handling to avoid dereferencing a NULL pointer when
attempting to remove the character device.

Fixes: 72dc1c096c70 ("HSO: add option hso driver")
Cc: stable@vger.kernel.org	# 2.6.27
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/hso.c |   12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -2720,14 +2720,14 @@ struct hso_device *hso_create_mux_serial
 
 	serial = kzalloc(sizeof(*serial), GFP_KERNEL);
 	if (!serial)
-		goto exit;
+		goto err_free_dev;
 
 	hso_dev->port_data.dev_serial = serial;
 	serial->parent = hso_dev;
 
 	if (hso_serial_common_create
 	    (serial, 1, CTRL_URB_RX_SIZE, CTRL_URB_TX_SIZE))
-		goto exit;
+		goto err_free_serial;
 
 	serial->tx_data_length--;
 	serial->write_data = hso_mux_serial_write_data;
@@ -2743,11 +2743,9 @@ struct hso_device *hso_create_mux_serial
 	/* done, return it */
 	return hso_dev;
 
-exit:
-	if (serial) {
-		tty_unregister_device(tty_drv, serial->minor);
-		kfree(serial);
-	}
+err_free_serial:
+	kfree(serial);
+err_free_dev:
 	kfree(hso_dev);
 	return NULL;
 

[PATCH 5.14 043/162] platform/x86: amd-pmc: Increase the response register timeout

[Greg Kroah-Hartman]

From: Mario Limonciello <mario.limonciello@amd.com>

commit 3c3c8e88c8712bfe06cd10d7ca77a94a33610cd6 upstream.

There have been reports of approximately a 0.9%-1.7% failure rate in SMU
communication timeouts with s0i3 entry on some OEM designs.  Currently
the design in amd-pmc is to try every 100us for up to 20ms.

However the GPU driver which also communicates with the SMU using a
mailbox register which the driver polls every 1us for up to 2000ms.
In the GPU driver this was increased by commit 055162645a40 ("drm/amd/pm:
increase time out value when sending msg to SMU")

Increase the maximum timeout used by amd-pmc to 2000ms to match this
behavior.  This has been shown to improve the stability for machines
that randomly have failures.

Cc: stable@kernel.org
Reported-by: Julian Sikorski <belegdol@gmail.com>
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1629
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20210914020115.655-1-mario.limonciello@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/platform/x86/amd-pmc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/platform/x86/amd-pmc.c
+++ b/drivers/platform/x86/amd-pmc.c
@@ -71,7 +71,7 @@
 #define AMD_CPU_ID_YC			0x14B5
 
 #define PMC_MSG_DELAY_MIN_US		100
-#define RESPONSE_REGISTER_LOOP_MAX	200
+#define RESPONSE_REGISTER_LOOP_MAX	20000
 
 #define SOC_SUBSYSTEM_IP_MAX	12
 #define DELAY_MIN_US		2000

[PATCH 5.14 044/162] arm64: Restore forced disabling of KPTI on ThunderX

[Greg Kroah-Hartman]

From: dann frazier <dann.frazier@canonical.com>

commit 22b70e6f2da0a4c8b1421b00cfc3016bc9d4d9d4 upstream.

A noted side-effect of commit 0c6c2d3615ef ("arm64: Generate cpucaps.h")
is that cpucaps are now sorted, changing the enumeration order. This
assumed no dependencies between cpucaps, which turned out not to be true
in one case. UNMAP_KERNEL_AT_EL0 currently needs to be processed after
WORKAROUND_CAVIUM_27456. ThunderX systems are incompatible with KPTI, so
unmap_kernel_at_el0() bails if WORKAROUND_CAVIUM_27456 is set. But because
of the sorting, WORKAROUND_CAVIUM_27456 will not yet have been considered
when unmap_kernel_at_el0() checks for it, so the kernel tries to
run w/ KPTI - and quickly falls over.

Because all ThunderX implementations have homogeneous CPUs, we can remove
this dependency by just checking the current CPU for the erratum.

Fixes: 0c6c2d3615ef ("arm64: Generate cpucaps.h")
Cc: <stable@vger.kernel.org> # 5.13.x
Signed-off-by: dann frazier <dann.frazier@canonical.com>
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210923145002.3394558-1-dann.frazier@canonical.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/kernel/cpufeature.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -1500,9 +1500,13 @@ static bool unmap_kernel_at_el0(const st
 	/*
 	 * For reasons that aren't entirely clear, enabling KPTI on Cavium
 	 * ThunderX leads to apparent I-cache corruption of kernel text, which
-	 * ends as well as you might imagine. Don't even try.
+	 * ends as well as you might imagine. Don't even try. We cannot rely
+	 * on the cpus_have_*cap() helpers here to detect the CPU erratum
+	 * because cpucap detection order may change. However, since we know
+	 * affected CPUs are always in a homogeneous configuration, it is
+	 * safe to rely on this_cpu_has_cap() here.
 	 */
-	if (cpus_have_const_cap(ARM64_WORKAROUND_CAVIUM_27456)) {
+	if (this_cpu_has_cap(ARM64_WORKAROUND_CAVIUM_27456)) {
 		str = "ARM64_WORKAROUND_CAVIUM_27456";
 		__kpti_forced = -1;
 	}

[PATCH 5.14 045/162] arm64: Mitigate MTE issues with str{n}cmp()

[Greg Kroah-Hartman]

From: Robin Murphy <robin.murphy@arm.com>

commit 59a68d4138086c015ab8241c3267eec5550fbd44 upstream.

As with strlen(), the patches importing the updated str{n}cmp()
implementations were originally developed and tested before the
advent of CONFIG_KASAN_HW_TAGS, and have subsequently revealed
not to be MTE-safe. Since in-kernel MTE is still a rather niche
case, let it temporarily fall back to the generic C versions for
correctness until we can figure out the best fix.

Fixes: 758602c04409 ("arm64: Import latest version of Cortex Strings' strcmp")
Fixes: 020b199bc70d ("arm64: Import latest version of Cortex Strings' strncmp")
Cc: <stable@vger.kernel.org> # 5.14.x
Reported-by: Branislav Rankov <branislav.rankov@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/34dc4d12eec0adae49b0ac927df642ed10089d40.1631890770.git.robin.murphy@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/include/asm/assembler.h |    5 +++++
 arch/arm64/include/asm/string.h    |    2 ++
 arch/arm64/lib/strcmp.S            |    2 +-
 arch/arm64/lib/strncmp.S           |    2 +-
 4 files changed, 9 insertions(+), 2 deletions(-)

--- a/arch/arm64/include/asm/assembler.h
+++ b/arch/arm64/include/asm/assembler.h
@@ -525,6 +525,11 @@ alternative_endif
 #define EXPORT_SYMBOL_NOKASAN(name)	EXPORT_SYMBOL(name)
 #endif
 
+#ifdef CONFIG_KASAN_HW_TAGS
+#define EXPORT_SYMBOL_NOHWKASAN(name)
+#else
+#define EXPORT_SYMBOL_NOHWKASAN(name)	EXPORT_SYMBOL_NOKASAN(name)
+#endif
 	/*
 	 * Emit a 64-bit absolute little endian symbol reference in a way that
 	 * ensures that it will be resolved at build time, even when building a
--- a/arch/arm64/include/asm/string.h
+++ b/arch/arm64/include/asm/string.h
@@ -12,11 +12,13 @@ extern char *strrchr(const char *, int c
 #define __HAVE_ARCH_STRCHR
 extern char *strchr(const char *, int c);
 
+#ifndef CONFIG_KASAN_HW_TAGS
 #define __HAVE_ARCH_STRCMP
 extern int strcmp(const char *, const char *);
 
 #define __HAVE_ARCH_STRNCMP
 extern int strncmp(const char *, const char *, __kernel_size_t);
+#endif
 
 #define __HAVE_ARCH_STRLEN
 extern __kernel_size_t strlen(const char *);
--- a/arch/arm64/lib/strcmp.S
+++ b/arch/arm64/lib/strcmp.S
@@ -173,4 +173,4 @@ L(done):
 	ret
 
 SYM_FUNC_END_PI(strcmp)
-EXPORT_SYMBOL_NOKASAN(strcmp)
+EXPORT_SYMBOL_NOHWKASAN(strcmp)
--- a/arch/arm64/lib/strncmp.S
+++ b/arch/arm64/lib/strncmp.S
@@ -258,4 +258,4 @@ L(ret0):
 	ret
 
 SYM_FUNC_END_PI(strncmp)
-EXPORT_SYMBOL_NOKASAN(strncmp)
+EXPORT_SYMBOL_NOHWKASAN(strncmp)

[PATCH 5.14 046/162] comedi: Fix memory leak in compat_insnlist()

[Greg Kroah-Hartman]

From: Ian Abbott <abbotti@mev.co.uk>

commit bb509a6ffed2c8b0950f637ab5779aa818ed1596 upstream.

`compat_insnlist()` handles the 32-bit version of the `COMEDI_INSNLIST`
ioctl (whenwhen `CONFIG_COMPAT` is enabled).  It allocates memory to
temporarily hold an array of `struct comedi_insn` converted from the
32-bit version in user space.  This memory is only being freed if there
is a fault while filling the array, otherwise it is leaked.

Add a call to `kfree()` to fix the leak.

Fixes: b8d47d881305 ("comedi: get rid of compat_alloc_user_space() mess in COMEDI_INSNLIST compat")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-staging@lists.linux.dev
Cc: <stable@vger.kernel.org> # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20210916145023.157479-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/comedi/comedi_fops.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/comedi/comedi_fops.c
+++ b/drivers/comedi/comedi_fops.c
@@ -3090,6 +3090,7 @@ static int compat_insnlist(struct file *
 	mutex_lock(&dev->mutex);
 	rc = do_insnlist_ioctl(dev, insns, insnlist32.n_insns, file);
 	mutex_unlock(&dev->mutex);
+	kfree(insns);
 	return rc;
 }
 

[PATCH 5.14 047/162] regulator: qcom-rpmh-regulator: fix pm8009-1 ldo7 resource name

[Greg Kroah-Hartman]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit 863580418bc82062083be854355f2213d3d804f5 ]

Fix a typo in the pm8009 LDO7 declaration, it uses resource name ldo%s6
instead of ldo%s7.

Fixes: 951384cabc5d ("regulator: qcom-rpmh-regulator: add pm8009-1 chip revision")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210901114350.1106073-1-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/qcom-rpmh-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index 6cca910a76de..7f458d510483 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -991,7 +991,7 @@ static const struct rpmh_vreg_init_data pm8009_1_vreg_data[] = {
 	RPMH_VREG("ldo4",   "ldo%s4",  &pmic5_nldo,      "vdd-l4"),
 	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_pldo,      "vdd-l5-l6"),
 	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_pldo,      "vdd-l5-l6"),
-	RPMH_VREG("ldo7",   "ldo%s6",  &pmic5_pldo_lv,   "vdd-l7"),
+	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo_lv,   "vdd-l7"),
 	{}
 };
 
-- 
2.33.0

[PATCH 5.14 048/162] afs: Fix page leak

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 581b2027af0018944ba301d68e7af45c6d1128b5 ]

There's a loop in afs_extend_writeback() that adds extra pages to a write
we want to make to improve the efficiency of the writeback by making it
larger.  This loop stops, however, if we hit a page we can't write back
from immediately, but it doesn't get rid of the page ref we speculatively
acquired.

This was caused by the removal of the cleanup loop when the code switched
from using find_get_pages_contig() to xarray scanning as the latter only
gets a single page at a time, not a batch.

Fix this by putting the page on a ref on an early break from the loop.
Unfortunately, we can't just add that page to the pagevec we're employing
as we'll go through that and add those pages to the RPC call.

This was found by the generic/074 test.  It leaks ~4GiB of RAM each time it
is run - which can be observed with "top".

Fixes: e87b03f5830e ("afs: Prepare for use of THPs")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/163111666635.283156.177701903478910460.stgit@warthog.procyon.org.uk/
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/afs/write.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/fs/afs/write.c b/fs/afs/write.c
index c0534697268e..66b235266893 100644
--- a/fs/afs/write.c
+++ b/fs/afs/write.c
@@ -471,13 +471,18 @@ static void afs_extend_writeback(struct address_space *mapping,
 			}
 
 			/* Has the page moved or been split? */
-			if (unlikely(page != xas_reload(&xas)))
+			if (unlikely(page != xas_reload(&xas))) {
+				put_page(page);
 				break;
+			}
 
-			if (!trylock_page(page))
+			if (!trylock_page(page)) {
+				put_page(page);
 				break;
+			}
 			if (!PageDirty(page) || PageWriteback(page)) {
 				unlock_page(page);
+				put_page(page);
 				break;
 			}
 
@@ -487,6 +492,7 @@ static void afs_extend_writeback(struct address_space *mapping,
 			t = afs_page_dirty_to(page, priv);
 			if (f != 0 && !new_content) {
 				unlock_page(page);
+				put_page(page);
 				break;
 			}
 
-- 
2.33.0

[PATCH 5.14 049/162] afs: Fix incorrect triggering of sillyrename on 3rd-party invalidation

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 63d49d843ef5fffeea069e0ffdfbd2bf40ba01c6 ]

The AFS filesystem is currently triggering the silly-rename cleanup from
afs_d_revalidate() when it sees that a dentry has been changed by a third
party[1].  It should not be doing this as the cleanup includes deleting the
silly-rename target file on iput.

Fix this by removing the places in the d_revalidate handling that validate
anything other than the directory and the dirent.  It probably should not
be looking to validate the target inode of the dentry also.

This includes removing the point in afs_d_revalidate() where the inode that
a dentry used to point to was marked as being deleted (AFS_VNODE_DELETED).
We don't know it got deleted.  It could have been renamed or it could have
hard links remaining.

This was reproduced by cloning a git repo onto an afs volume on one
machine, switching to another machine and doing "git status", then
switching back to the first and doing "git status".  The second status
would show weird output due to ".git/index" getting deleted by the above
mentioned mechanism.

A simpler way to do it is to do:

	machine 1: touch a
	machine 2: touch b; mv -f b a
	machine 1: stat a

on an afs volume.  The bug shows up as the stat failing with ENOENT and the
file server log showing that machine 1 deleted "a".

Fixes: 79ddbfa500b3 ("afs: Implement sillyrename for unlink and rename")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: linux-afs@lists.infradead.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214217#c4 [1]
Link: https://lore.kernel.org/r/163111668100.283156.3851669884664475428.stgit@warthog.procyon.org.uk/
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/afs/dir.c | 46 +++++++---------------------------------------
 1 file changed, 7 insertions(+), 39 deletions(-)

diff --git a/fs/afs/dir.c b/fs/afs/dir.c
index ac829e63c570..54ee54ae36bc 100644
--- a/fs/afs/dir.c
+++ b/fs/afs/dir.c
@@ -1077,9 +1077,9 @@ static struct dentry *afs_lookup(struct inode *dir, struct dentry *dentry,
  */
 static int afs_d_revalidate_rcu(struct dentry *dentry)
 {
-	struct afs_vnode *dvnode, *vnode;
+	struct afs_vnode *dvnode;
 	struct dentry *parent;
-	struct inode *dir, *inode;
+	struct inode *dir;
 	long dir_version, de_version;
 
 	_enter("%p", dentry);
@@ -1109,18 +1109,6 @@ static int afs_d_revalidate_rcu(struct dentry *dentry)
 			return -ECHILD;
 	}
 
-	/* Check to see if the vnode referred to by the dentry still
-	 * has a callback.
-	 */
-	if (d_really_is_positive(dentry)) {
-		inode = d_inode_rcu(dentry);
-		if (inode) {
-			vnode = AFS_FS_I(inode);
-			if (!afs_check_validity(vnode))
-				return -ECHILD;
-		}
-	}
-
 	return 1; /* Still valid */
 }
 
@@ -1156,17 +1144,7 @@ static int afs_d_revalidate(struct dentry *dentry, unsigned int flags)
 	if (IS_ERR(key))
 		key = NULL;
 
-	if (d_really_is_positive(dentry)) {
-		inode = d_inode(dentry);
-		if (inode) {
-			vnode = AFS_FS_I(inode);
-			afs_validate(vnode, key);
-			if (test_bit(AFS_VNODE_DELETED, &vnode->flags))
-				goto out_bad;
-		}
-	}
-
-	/* lock down the parent dentry so we can peer at it */
+	/* Hold the parent dentry so we can peer at it */
 	parent = dget_parent(dentry);
 	dir = AFS_FS_I(d_inode(parent));
 
@@ -1175,7 +1153,7 @@ static int afs_d_revalidate(struct dentry *dentry, unsigned int flags)
 
 	if (test_bit(AFS_VNODE_DELETED, &dir->flags)) {
 		_debug("%pd: parent dir deleted", dentry);
-		goto out_bad_parent;
+		goto not_found;
 	}
 
 	/* We only need to invalidate a dentry if the server's copy changed
@@ -1201,12 +1179,12 @@ static int afs_d_revalidate(struct dentry *dentry, unsigned int flags)
 	case 0:
 		/* the filename maps to something */
 		if (d_really_is_negative(dentry))
-			goto out_bad_parent;
+			goto not_found;
 		inode = d_inode(dentry);
 		if (is_bad_inode(inode)) {
 			printk("kAFS: afs_d_revalidate: %pd2 has bad inode\n",
 			       dentry);
-			goto out_bad_parent;
+			goto not_found;
 		}
 
 		vnode = AFS_FS_I(inode);
@@ -1228,9 +1206,6 @@ static int afs_d_revalidate(struct dentry *dentry, unsigned int flags)
 			       dentry, fid.unique,
 			       vnode->fid.unique,
 			       vnode->vfs_inode.i_generation);
-			write_seqlock(&vnode->cb_lock);
-			set_bit(AFS_VNODE_DELETED, &vnode->flags);
-			write_sequnlock(&vnode->cb_lock);
 			goto not_found;
 		}
 		goto out_valid;
@@ -1245,7 +1220,7 @@ static int afs_d_revalidate(struct dentry *dentry, unsigned int flags)
 	default:
 		_debug("failed to iterate dir %pd: %d",
 		       parent, ret);
-		goto out_bad_parent;
+		goto not_found;
 	}
 
 out_valid:
@@ -1256,16 +1231,9 @@ static int afs_d_revalidate(struct dentry *dentry, unsigned int flags)
 	_leave(" = 1 [valid]");
 	return 1;
 
-	/* the dirent, if it exists, now points to a different vnode */
 not_found:
-	spin_lock(&dentry->d_lock);
-	dentry->d_flags |= DCACHE_NFSFS_RENAMED;
-	spin_unlock(&dentry->d_lock);
-
-out_bad_parent:
 	_debug("dropping dentry %pd2", dentry);
 	dput(parent);
-out_bad:
 	key_put(key);
 
 	_leave(" = 0 [bad]");
-- 
2.33.0

[PATCH 5.14 050/162] afs: Fix corruption in reads at fpos 2G-4G from an OpenAFS server

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

[ Upstream commit b537a3c21775075395af475dcc6ef212fcf29db8 ]

AFS-3 has two data fetch RPC variants, FS.FetchData and FS.FetchData64, and
Linux's afs client switches between them when talking to a non-YFS server
if the read size, the file position or the sum of the two have the upper 32
bits set of the 64-bit value.

This is a problem, however, since the file position and length fields of
FS.FetchData are *signed* 32-bit values.

Fix this by capturing the capability bits obtained from the fileserver when
it's sent an FS.GetCapabilities RPC, rather than just discarding them, and
then picking out the VICED_CAPABILITY_64BITFILES flag.  This can then be
used to decide whether to use FS.FetchData or FS.FetchData64 - and also
FS.StoreData or FS.StoreData64 - rather than using upper_32_bits() to
switch on the parameter values.

This capabilities flag could also be used to limit the maximum size of the
file, but all servers must be checked for that.

Note that the issue does not exist with FS.StoreData - that uses *unsigned*
32-bit values.  It's also not a problem with Auristor servers as its
YFS.FetchData64 op uses unsigned 64-bit values.

This can be tested by cloning a git repo through an OpenAFS client to an
OpenAFS server and then doing "git status" on it from a Linux afs
client[1].  Provided the clone has a pack file that's in the 2G-4G range,
the git status will show errors like:

	error: packfile .git/objects/pack/pack-5e813c51d12b6847bbc0fcd97c2bca66da50079c.pack does not match index
	error: packfile .git/objects/pack/pack-5e813c51d12b6847bbc0fcd97c2bca66da50079c.pack does not match index

This can be observed in the server's FileLog with something like the
following appearing:

Sun Aug 29 19:31:39 2021 SRXAFS_FetchData, Fid = 2303380852.491776.3263114, Host 192.168.11.201:7001, Id 1001
Sun Aug 29 19:31:39 2021 CheckRights: len=0, for host=192.168.11.201:7001
Sun Aug 29 19:31:39 2021 FetchData_RXStyle: Pos 18446744071815340032, Len 3154
Sun Aug 29 19:31:39 2021 FetchData_RXStyle: file size 2400758866
...
Sun Aug 29 19:31:40 2021 SRXAFS_FetchData returns 5

Note the file position of 18446744071815340032.  This is the requested file
position sign-extended.

Fixes: b9b1f8d5930a ("AFS: write support fixes")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: linux-afs@lists.infradead.org
cc: openafs-devel@openafs.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214217#c9 [1]
Link: https://lore.kernel.org/r/951332.1631308745@warthog.procyon.org.uk/
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/afs/fs_probe.c     |  8 +++++++-
 fs/afs/fsclient.c     | 31 ++++++++++++++++++++-----------
 fs/afs/internal.h     |  1 +
 fs/afs/protocol_afs.h | 15 +++++++++++++++
 fs/afs/protocol_yfs.h |  6 ++++++
 5 files changed, 49 insertions(+), 12 deletions(-)
 create mode 100644 fs/afs/protocol_afs.h

diff --git a/fs/afs/fs_probe.c b/fs/afs/fs_probe.c
index e7e98ad63a91..c0031a3ab42f 100644
--- a/fs/afs/fs_probe.c
+++ b/fs/afs/fs_probe.c
@@ -9,6 +9,7 @@
 #include <linux/slab.h>
 #include "afs_fs.h"
 #include "internal.h"
+#include "protocol_afs.h"
 #include "protocol_yfs.h"
 
 static unsigned int afs_fs_probe_fast_poll_interval = 30 * HZ;
@@ -102,7 +103,7 @@ void afs_fileserver_probe_result(struct afs_call *call)
 	struct afs_addr_list *alist = call->alist;
 	struct afs_server *server = call->server;
 	unsigned int index = call->addr_ix;
-	unsigned int rtt_us = 0;
+	unsigned int rtt_us = 0, cap0;
 	int ret = call->error;
 
 	_enter("%pU,%u", &server->uuid, index);
@@ -159,6 +160,11 @@ void afs_fileserver_probe_result(struct afs_call *call)
 			clear_bit(AFS_SERVER_FL_IS_YFS, &server->flags);
 			alist->addrs[index].srx_service = call->service_id;
 		}
+		cap0 = ntohl(call->tmp);
+		if (cap0 & AFS3_VICED_CAPABILITY_64BITFILES)
+			set_bit(AFS_SERVER_FL_HAS_FS64, &server->flags);
+		else
+			clear_bit(AFS_SERVER_FL_HAS_FS64, &server->flags);
 	}
 
 	if (rxrpc_kernel_get_srtt(call->net->socket, call->rxcall, &rtt_us) &&
diff --git a/fs/afs/fsclient.c b/fs/afs/fsclient.c
index dd3f45d906d2..4943413d9c5f 100644
--- a/fs/afs/fsclient.c
+++ b/fs/afs/fsclient.c
@@ -456,9 +456,7 @@ void afs_fs_fetch_data(struct afs_operation *op)
 	struct afs_read *req = op->fetch.req;
 	__be32 *bp;
 
-	if (upper_32_bits(req->pos) ||
-	    upper_32_bits(req->len) ||
-	    upper_32_bits(req->pos + req->len))
+	if (test_bit(AFS_SERVER_FL_HAS_FS64, &op->server->flags))
 		return afs_fs_fetch_data64(op);
 
 	_enter("");
@@ -1113,9 +1111,7 @@ void afs_fs_store_data(struct afs_operation *op)
 	       (unsigned long long)op->store.pos,
 	       (unsigned long long)op->store.i_size);
 
-	if (upper_32_bits(op->store.pos) ||
-	    upper_32_bits(op->store.size) ||
-	    upper_32_bits(op->store.i_size))
+	if (test_bit(AFS_SERVER_FL_HAS_FS64, &op->server->flags))
 		return afs_fs_store_data64(op);
 
 	call = afs_alloc_flat_call(op->net, &afs_RXFSStoreData,
@@ -1229,7 +1225,7 @@ static void afs_fs_setattr_size(struct afs_operation *op)
 	       key_serial(op->key), vp->fid.vid, vp->fid.vnode);
 
 	ASSERT(attr->ia_valid & ATTR_SIZE);
-	if (upper_32_bits(attr->ia_size))
+	if (test_bit(AFS_SERVER_FL_HAS_FS64, &op->server->flags))
 		return afs_fs_setattr_size64(op);
 
 	call = afs_alloc_flat_call(op->net, &afs_RXFSStoreData_as_Status,
@@ -1657,20 +1653,33 @@ static int afs_deliver_fs_get_capabilities(struct afs_call *call)
 			return ret;
 
 		count = ntohl(call->tmp);
-
 		call->count = count;
 		call->count2 = count;
-		afs_extract_discard(call, count * sizeof(__be32));
+		if (count == 0) {
+			call->unmarshall = 4;
+			call->tmp = 0;
+			break;
+		}
+
+		/* Extract the first word of the capabilities to call->tmp */
+		afs_extract_to_tmp(call);
 		call->unmarshall++;
 		fallthrough;
 
-		/* Extract capabilities words */
 	case 2:
 		ret = afs_extract_data(call, false);
 		if (ret < 0)
 			return ret;
 
-		/* TODO: Examine capabilities */
+		afs_extract_discard(call, (count - 1) * sizeof(__be32));
+		call->unmarshall++;
+		fallthrough;
+
+		/* Extract remaining capabilities words */
+	case 3:
+		ret = afs_extract_data(call, false);
+		if (ret < 0)
+			return ret;
 
 		call->unmarshall++;
 		break;
diff --git a/fs/afs/internal.h b/fs/afs/internal.h
index 5ed416f4ff33..928408888054 100644
--- a/fs/afs/internal.h
+++ b/fs/afs/internal.h
@@ -516,6 +516,7 @@ struct afs_server {
 #define AFS_SERVER_FL_IS_YFS	16		/* Server is YFS not AFS */
 #define AFS_SERVER_FL_NO_IBULK	17		/* Fileserver doesn't support FS.InlineBulkStatus */
 #define AFS_SERVER_FL_NO_RM2	18		/* Fileserver doesn't support YFS.RemoveFile2 */
+#define AFS_SERVER_FL_HAS_FS64	19		/* Fileserver supports FS.{Fetch,Store}Data64 */
 	atomic_t		ref;		/* Object refcount */
 	atomic_t		active;		/* Active user count */
 	u32			addr_version;	/* Address list version */
diff --git a/fs/afs/protocol_afs.h b/fs/afs/protocol_afs.h
new file mode 100644
index 000000000000..0c39358c8b70
--- /dev/null
+++ b/fs/afs/protocol_afs.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* AFS protocol bits
+ *
+ * Copyright (C) 2021 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ */
+
+
+#define AFSCAPABILITIESMAX 196 /* Maximum number of words in a capability set */
+
+/* AFS3 Fileserver capabilities word 0 */
+#define AFS3_VICED_CAPABILITY_ERRORTRANS	0x0001 /* Uses UAE errors */
+#define AFS3_VICED_CAPABILITY_64BITFILES	0x0002 /* FetchData64 & StoreData64 supported */
+#define AFS3_VICED_CAPABILITY_WRITELOCKACL	0x0004 /* Can lock a file even without lock perm */
+#define AFS3_VICED_CAPABILITY_SANEACLS		0x0008 /* ACLs reviewed for sanity - don't use */
diff --git a/fs/afs/protocol_yfs.h b/fs/afs/protocol_yfs.h
index b5bd03b1d3c7..e4cd89c44c46 100644
--- a/fs/afs/protocol_yfs.h
+++ b/fs/afs/protocol_yfs.h
@@ -168,3 +168,9 @@ enum yfs_lock_type {
 	yfs_LockMandatoryWrite	= 0x101,
 	yfs_LockMandatoryExtend	= 0x102,
 };
+
+/* RXYFS Viced Capability Flags */
+#define YFS_VICED_CAPABILITY_ERRORTRANS		0x0001 /* Deprecated v0.195 */
+#define YFS_VICED_CAPABILITY_64BITFILES		0x0002 /* Deprecated v0.195 */
+#define YFS_VICED_CAPABILITY_WRITELOCKACL	0x0004 /* Can lock a file even without lock perm */
+#define YFS_VICED_CAPABILITY_SANEACLS		0x0008 /* Deprecated v0.195 */
-- 
2.33.0

[PATCH 5.14 051/162] afs: Fix updating of i_blocks on file/dir extension

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 9d37e1cab2a9d2cee2737973fa455e6f89eee46a ]

When an afs file or directory is modified locally such that the total file
size is extended, i_blocks needs to be recalculated too.

Fix this by making afs_write_end() and afs_edit_dir_add() call
afs_set_i_size() rather than setting inode->i_size directly as that also
recalculates inode->i_blocks.

This can be tested by creating and writing into directories and files and
then examining them with du.  Without this change, directories show a 4
blocks (they start out at 2048 bytes) and files show 0 blocks; with this
change, they should show a number of blocks proportional to the file size
rounded up to 1024.

Fixes: 31143d5d515e ("AFS: implement basic file write support")
Fixes: 63a4681ff39c ("afs: Locally edit directory data for mkdir/create/unlink/...")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/163113612442.352844.11162345591911691150.stgit@warthog.procyon.org.uk/
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/afs/dir_edit.c |  4 ++--
 fs/afs/inode.c    | 10 ----------
 fs/afs/internal.h | 10 ++++++++++
 fs/afs/write.c    |  2 +-
 4 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/fs/afs/dir_edit.c b/fs/afs/dir_edit.c
index f4600c1353ad..540b9fc96824 100644
--- a/fs/afs/dir_edit.c
+++ b/fs/afs/dir_edit.c
@@ -263,7 +263,7 @@ void afs_edit_dir_add(struct afs_vnode *vnode,
 		if (b == nr_blocks) {
 			_debug("init %u", b);
 			afs_edit_init_block(meta, block, b);
-			i_size_write(&vnode->vfs_inode, (b + 1) * AFS_DIR_BLOCK_SIZE);
+			afs_set_i_size(vnode, (b + 1) * AFS_DIR_BLOCK_SIZE);
 		}
 
 		/* Only lower dir pages have a counter in the header. */
@@ -296,7 +296,7 @@ void afs_edit_dir_add(struct afs_vnode *vnode,
 new_directory:
 	afs_edit_init_block(meta, meta, 0);
 	i_size = AFS_DIR_BLOCK_SIZE;
-	i_size_write(&vnode->vfs_inode, i_size);
+	afs_set_i_size(vnode, i_size);
 	slot = AFS_DIR_RESV_BLOCKS0;
 	page = page0;
 	block = meta;
diff --git a/fs/afs/inode.c b/fs/afs/inode.c
index 80b6c8d967d5..c18cbc69fa58 100644
--- a/fs/afs/inode.c
+++ b/fs/afs/inode.c
@@ -53,16 +53,6 @@ static noinline void dump_vnode(struct afs_vnode *vnode, struct afs_vnode *paren
 		dump_stack();
 }
 
-/*
- * Set the file size and block count.  Estimate the number of 512 bytes blocks
- * used, rounded up to nearest 1K for consistency with other AFS clients.
- */
-static void afs_set_i_size(struct afs_vnode *vnode, u64 size)
-{
-	i_size_write(&vnode->vfs_inode, size);
-	vnode->vfs_inode.i_blocks = ((size + 1023) >> 10) << 1;
-}
-
 /*
  * Initialise an inode from the vnode status.
  */
diff --git a/fs/afs/internal.h b/fs/afs/internal.h
index 928408888054..345494881f65 100644
--- a/fs/afs/internal.h
+++ b/fs/afs/internal.h
@@ -1586,6 +1586,16 @@ static inline void afs_update_dentry_version(struct afs_operation *op,
 			(void *)(unsigned long)dir_vp->scb.status.data_version;
 }
 
+/*
+ * Set the file size and block count.  Estimate the number of 512 bytes blocks
+ * used, rounded up to nearest 1K for consistency with other AFS clients.
+ */
+static inline void afs_set_i_size(struct afs_vnode *vnode, u64 size)
+{
+	i_size_write(&vnode->vfs_inode, size);
+	vnode->vfs_inode.i_blocks = ((size + 1023) >> 10) << 1;
+}
+
 /*
  * Check for a conflicting operation on a directory that we just unlinked from.
  * If someone managed to sneak a link or an unlink in on the file we just
diff --git a/fs/afs/write.c b/fs/afs/write.c
index 66b235266893..e86f5a245514 100644
--- a/fs/afs/write.c
+++ b/fs/afs/write.c
@@ -137,7 +137,7 @@ int afs_write_end(struct file *file, struct address_space *mapping,
 		write_seqlock(&vnode->cb_lock);
 		i_size = i_size_read(&vnode->vfs_inode);
 		if (maybe_i_size > i_size)
-			i_size_write(&vnode->vfs_inode, maybe_i_size);
+			afs_set_i_size(vnode, maybe_i_size);
 		write_sequnlock(&vnode->cb_lock);
 	}
 
-- 
2.33.0

[PATCH 5.14 052/162] platform/x86/intel: punit_ipc: Drop wrong use of ACPI_PTR()

[Greg Kroah-Hartman]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 349bff48ae0f5f8aa2075d0bdc2091a30bd634f6 ]

ACPI_PTR() is more harmful than helpful. For example, in this case
if CONFIG_ACPI=n, the ID table left unused which is not what we want.

Instead of adding ifdeffery here and there, drop ACPI_PTR()
and unused acpi.h.

Fixes: fdca4f16f57d ("platform:x86: add Intel P-Unit mailbox IPC driver")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210827145310.76239-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel_punit_ipc.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/platform/x86/intel_punit_ipc.c b/drivers/platform/x86/intel_punit_ipc.c
index f58b8543f6ac..66bb39fd0ef9 100644
--- a/drivers/platform/x86/intel_punit_ipc.c
+++ b/drivers/platform/x86/intel_punit_ipc.c
@@ -8,7 +8,6 @@
  * which provide mailbox interface for power management usage.
  */
 
-#include <linux/acpi.h>
 #include <linux/bitops.h>
 #include <linux/delay.h>
 #include <linux/device.h>
@@ -319,7 +318,7 @@ static struct platform_driver intel_punit_ipc_driver = {
 	.remove = intel_punit_ipc_remove,
 	.driver = {
 		.name = "intel_punit_ipc",
-		.acpi_match_table = ACPI_PTR(punit_ipc_acpi_ids),
+		.acpi_match_table = punit_ipc_acpi_ids,
 	},
 };
 
-- 
2.33.0

[PATCH 5.14 053/162] regulator: max14577: Revert "regulator: max14577: Add proper module aliases strings"

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

[ Upstream commit dc9660590d106bb58d145233fffca4efadad3655 ]

This reverts commit 0da6736ecd10b45e535b100acd58df2db4c099d8.

The MODULE_DEVICE_TABLE already creates proper alias.  Having another
MODULE_ALIAS causes the alias to be duplicated:

  $ modinfo max14577-regulator.ko

  alias:          platform:max77836-regulator
  alias:          platform:max14577-regulator
  description:    Maxim 14577/77836 regulator driver
  alias:          platform:max77836-regulator
  alias:          platform:max14577-regulator

Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 0da6736ecd10 ("regulator: max14577: Add proper module aliases strings")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20210916144102.120980-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/max14577-regulator.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/regulator/max14577-regulator.c b/drivers/regulator/max14577-regulator.c
index 1d78b455cc48..e34face736f4 100644
--- a/drivers/regulator/max14577-regulator.c
+++ b/drivers/regulator/max14577-regulator.c
@@ -269,5 +269,3 @@ module_exit(max14577_regulator_exit);
 MODULE_AUTHOR("Krzysztof Kozlowski <krzk@kernel.org>");
 MODULE_DESCRIPTION("Maxim 14577/77836 regulator driver");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:max14577-regulator");
-MODULE_ALIAS("platform:max77836-regulator");
-- 
2.33.0

[PATCH 5.14 054/162] NLM: Fix svcxdr_encode_owner()

[Greg Kroah-Hartman]

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit 89c485c7a3ecbc2ebd568f9c9c2edf3a8cf7485b ]

Dai Ngo reports that, since the XDR overhaul, the NLM server crashes
when the TEST procedure wants to return NLM_DENIED. There is a bug
in svcxdr_encode_owner() that none of our standard test cases found.

Replace the open-coded function with a call to an appropriate
pre-fabricated XDR helper.

Reported-by: Dai Ngo <Dai.Ngo@oracle.com>
Fixes: a6a63ca5652e ("lockd: Common NLM XDR helpers")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/lockd/svcxdr.h | 13 ++-----------
 1 file changed, 2 insertions(+), 11 deletions(-)

diff --git a/fs/lockd/svcxdr.h b/fs/lockd/svcxdr.h
index c69a0bb76c94..4f1a451da5ba 100644
--- a/fs/lockd/svcxdr.h
+++ b/fs/lockd/svcxdr.h
@@ -134,18 +134,9 @@ svcxdr_decode_owner(struct xdr_stream *xdr, struct xdr_netobj *obj)
 static inline bool
 svcxdr_encode_owner(struct xdr_stream *xdr, const struct xdr_netobj *obj)
 {
-	unsigned int quadlen = XDR_QUADLEN(obj->len);
-	__be32 *p;
-
-	if (xdr_stream_encode_u32(xdr, obj->len) < 0)
-		return false;
-	p = xdr_reserve_space(xdr, obj->len);
-	if (!p)
+	if (obj->len > XDR_MAX_NETOBJ)
 		return false;
-	p[quadlen - 1] = 0;	/* XDR pad */
-	memcpy(p, obj->data, obj->len);
-
-	return true;
+	return xdr_stream_encode_opaque(xdr, obj->data, obj->len) > 0;
 }
 
 #endif /* _LOCKD_SVCXDR_H_ */
-- 
2.33.0

[PATCH 5.14 055/162] virtio-net: fix pages leaking when building skb in big mode

[Greg Kroah-Hartman]

From: Jason Wang <jasowang@redhat.com>

[ Upstream commit afd92d82c9d715fb97565408755acad81573591a ]

We try to use build_skb() if we had sufficient tailroom. But we forget
to release the unused pages chained via private in big mode which will
leak pages. Fixing this by release the pages after building the skb in
big mode.

Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Fixes: fb32856b16ad ("virtio-net: page_to_skb() use build_skb when there's sufficient tailroom")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/virtio_net.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index eee493685aad..fb96658bb91f 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -435,6 +435,10 @@ static struct sk_buff *page_to_skb(struct virtnet_info *vi,
 
 		skb_reserve(skb, p - buf);
 		skb_put(skb, len);
+
+		page = (struct page *)page->private;
+		if (page)
+			give_pages(rq, page);
 		goto ok;
 	}
 
-- 
2.33.0

[PATCH 5.14 056/162] enetc: Fix illegal access when reading affinity_hint

[Greg Kroah-Hartman]

From: Claudiu Manoil <claudiu.manoil@nxp.com>

[ Upstream commit 7237a494decfa17d0b9d0076e6cee3235719de90 ]

irq_set_affinity_hit() stores a reference to the cpumask_t
parameter in the irq descriptor, and that reference can be
accessed later from irq_affinity_hint_proc_show(). Since
the cpu_mask parameter passed to irq_set_affinity_hit() has
only temporary storage (it's on the stack memory), later
accesses to it are illegal. Thus reads from the corresponding
procfs affinity_hint file can result in paging request oops.

The issue is fixed by the get_cpu_mask() helper, which provides
a permanent storage for the cpumask_t parameter.

Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/enetc/enetc.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c
index 3ca93adb9662..7f90c27c0e79 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc.c
@@ -1879,7 +1879,6 @@ static void enetc_clear_bdrs(struct enetc_ndev_priv *priv)
 static int enetc_setup_irqs(struct enetc_ndev_priv *priv)
 {
 	struct pci_dev *pdev = priv->si->pdev;
-	cpumask_t cpu_mask;
 	int i, j, err;
 
 	for (i = 0; i < priv->bdr_int_num; i++) {
@@ -1908,9 +1907,7 @@ static int enetc_setup_irqs(struct enetc_ndev_priv *priv)
 
 			enetc_wr(hw, ENETC_SIMSITRV(idx), entry);
 		}
-		cpumask_clear(&cpu_mask);
-		cpumask_set_cpu(i % num_online_cpus(), &cpu_mask);
-		irq_set_affinity_hint(irq, &cpu_mask);
+		irq_set_affinity_hint(irq, get_cpu_mask(i % num_online_cpus()));
 	}
 
 	return 0;
-- 
2.33.0

[PATCH 5.14 057/162] enetc: Fix uninitialized struct dim_sample field usage

[Greg Kroah-Hartman]

From: Claudiu Manoil <claudiu.manoil@nxp.com>

[ Upstream commit 9f7afa05c9522b086327929ae622facab0f0f72b ]

The only struct dim_sample member that does not get
initialized by dim_update_sample() is comp_ctr. (There
is special API to initialize comp_ctr:
dim_update_sample_with_comps(), and it is currently used
only for RDMA.) comp_ctr is used to compute curr_stats->cmps
and curr_stats->cpe_ratio (see dim_calc_stats()) which in
turn are consumed by the rdma_dim_*() API.  Therefore,
functionally, the net_dim*() API consumers are not affected.
Nevertheless, fix the computation of statistics based
on an uninitialized variable, even if the mentioned statistics
are not used at the moment.

Fixes: ae0e6a5d1627 ("enetc: Add adaptive interrupt coalescing")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/enetc/enetc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c
index 7f90c27c0e79..042327b9981f 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc.c
@@ -419,7 +419,7 @@ static void enetc_rx_dim_work(struct work_struct *w)
 
 static void enetc_rx_net_dim(struct enetc_int_vector *v)
 {
-	struct dim_sample dim_sample;
+	struct dim_sample dim_sample = {};
 
 	v->comp_cnt++;
 
-- 
2.33.0

[PATCH 5.14 058/162] igc: fix build errors for PTP

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 87758511075ec961486fe78d7548dd709b524433 ]

When IGC=y and PTP_1588_CLOCK=m, the ptp_*() interface family is
not available to the igc driver. Make this driver depend on
PTP_1588_CLOCK_OPTIONAL so that it will build without errors.

Various igc commits have used ptp_*() functions without checking
that PTP_1588_CLOCK is enabled. Fix all of these here.

Fixes these build errors:

ld: drivers/net/ethernet/intel/igc/igc_main.o: in function `igc_msix_other':
igc_main.c:(.text+0x6494): undefined reference to `ptp_clock_event'
ld: igc_main.c:(.text+0x64ef): undefined reference to `ptp_clock_event'
ld: igc_main.c:(.text+0x6559): undefined reference to `ptp_clock_event'
ld: drivers/net/ethernet/intel/igc/igc_ethtool.o: in function `igc_ethtool_get_ts_info':
igc_ethtool.c:(.text+0xc7a): undefined reference to `ptp_clock_index'
ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_feature_enable_i225':
igc_ptp.c:(.text+0x330): undefined reference to `ptp_find_pin'
ld: igc_ptp.c:(.text+0x36f): undefined reference to `ptp_find_pin'
ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_init':
igc_ptp.c:(.text+0x11cd): undefined reference to `ptp_clock_register'
ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_stop':
igc_ptp.c:(.text+0x12dd): undefined reference to `ptp_clock_unregister'
ld: drivers/platform/x86/dell/dell-wmi-privacy.o: in function `dell_privacy_wmi_probe':

Fixes: 64433e5bf40ab ("igc: Enable internal i225 PPS")
Fixes: 60dbede0c4f3d ("igc: Add support for ethtool GET_TS_INFO command")
Fixes: 87938851b6efb ("igc: enable auxiliary PHC functions for the i225")
Fixes: 5f2958052c582 ("igc: Add basic skeleton for PTP")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Ederson de Souza <ederson.desouza@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
index 82744a7501c7..c11d974a62d8 100644
--- a/drivers/net/ethernet/intel/Kconfig
+++ b/drivers/net/ethernet/intel/Kconfig
@@ -335,6 +335,7 @@ config IGC
 	tristate "Intel(R) Ethernet Controller I225-LM/I225-V support"
 	default n
 	depends on PCI
+	depends on PTP_1588_CLOCK_OPTIONAL
 	help
 	  This driver supports Intel(R) Ethernet Controller I225-LM/I225-V
 	  family of adapters.
-- 
2.33.0

[Intel-wired-lan] [PATCH 5.14 058/162] igc: fix build errors for PTP

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 87758511075ec961486fe78d7548dd709b524433 ]

When IGC=y and PTP_1588_CLOCK=m, the ptp_*() interface family is
not available to the igc driver. Make this driver depend on
PTP_1588_CLOCK_OPTIONAL so that it will build without errors.

Various igc commits have used ptp_*() functions without checking
that PTP_1588_CLOCK is enabled. Fix all of these here.

Fixes these build errors:

ld: drivers/net/ethernet/intel/igc/igc_main.o: in function `igc_msix_other':
igc_main.c:(.text+0x6494): undefined reference to `ptp_clock_event'
ld: igc_main.c:(.text+0x64ef): undefined reference to `ptp_clock_event'
ld: igc_main.c:(.text+0x6559): undefined reference to `ptp_clock_event'
ld: drivers/net/ethernet/intel/igc/igc_ethtool.o: in function `igc_ethtool_get_ts_info':
igc_ethtool.c:(.text+0xc7a): undefined reference to `ptp_clock_index'
ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_feature_enable_i225':
igc_ptp.c:(.text+0x330): undefined reference to `ptp_find_pin'
ld: igc_ptp.c:(.text+0x36f): undefined reference to `ptp_find_pin'
ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_init':
igc_ptp.c:(.text+0x11cd): undefined reference to `ptp_clock_register'
ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_stop':
igc_ptp.c:(.text+0x12dd): undefined reference to `ptp_clock_unregister'
ld: drivers/platform/x86/dell/dell-wmi-privacy.o: in function `dell_privacy_wmi_probe':

Fixes: 64433e5bf40ab ("igc: Enable internal i225 PPS")
Fixes: 60dbede0c4f3d ("igc: Add support for ethtool GET_TS_INFO command")
Fixes: 87938851b6efb ("igc: enable auxiliary PHC functions for the i225")
Fixes: 5f2958052c582 ("igc: Add basic skeleton for PTP")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Ederson de Souza <ederson.desouza@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: intel-wired-lan at lists.osuosl.org
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
index 82744a7501c7..c11d974a62d8 100644
--- a/drivers/net/ethernet/intel/Kconfig
+++ b/drivers/net/ethernet/intel/Kconfig
@@ -335,6 +335,7 @@ config IGC
 	tristate "Intel(R) Ethernet Controller I225-LM/I225-V support"
 	default n
 	depends on PCI
+	depends on PTP_1588_CLOCK_OPTIONAL
 	help
 	  This driver supports Intel(R) Ethernet Controller I225-LM/I225-V
 	  family of adapters.
-- 
2.33.0

[PATCH 5.14 059/162] net: dsa: tear down devlink port regions when tearing down the devlink port on error

[Greg Kroah-Hartman]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit fd292c189a979838622d5e03e15fa688c81dd50b ]

Commit 86f8b1c01a0a ("net: dsa: Do not make user port errors fatal")
decided it was fine to ignore errors on certain ports that fail to
probe, and go on with the ports that do probe fine.

Commit fb6ec87f7229 ("net: dsa: Fix type was not set for devlink port")
noticed that devlink_port_type_eth_set(dlp, dp->slave); does not get
called, and devlink notices after a timeout of 3600 seconds and prints a
WARN_ON. So it went ahead to unregister the devlink port. And because
there exists an UNUSED port flavour, we actually re-register the devlink
port as UNUSED.

Commit 08156ba430b4 ("net: dsa: Add devlink port regions support to
DSA") added devlink port regions, which are set up by the driver and not
by DSA.

When we trigger the devlink port deregistration and reregistration as
unused, devlink now prints another WARN_ON, from here:

devlink_port_unregister:
	WARN_ON(!list_empty(&devlink_port->region_list));

So the port still has regions, which makes sense, because they were set
up by the driver, and the driver doesn't know we're unregistering the
devlink port.

Somebody needs to tear them down, and optionally (actually it would be
nice, to be consistent) set them up again for the new devlink port.

But DSA's layering stays in our way quite badly here.

The options I've considered are:

1. Introduce a function in devlink to just change a port's type and
   flavour. No dice, devlink keeps a lot of state, it really wants the
   port to not be registered when you set its parameters, so changing
   anything can only be done by destroying what we currently have and
   recreating it.

2. Make DSA cache the parameters passed to dsa_devlink_port_region_create,
   and the region returned, keep those in a list, then when the devlink
   port unregister needs to take place, the existing devlink regions are
   destroyed by DSA, and we replay the creation of new regions using the
   cached parameters. Problem: mv88e6xxx keeps the region pointers in
   chip->ports[port].region, and these will remain stale after DSA frees
   them. There are many things DSA can do, but updating mv88e6xxx's
   private pointers is not one of them.

3. Just let the driver do it (i.e. introduce a very specific method
   called ds->ops->port_reinit_as_unused, which unregisters its devlink
   port devlink regions, then the old devlink port, then registers the
   new one, then the devlink port regions for it). While it does work,
   as opposed to the others, it's pretty horrible from an API
   perspective and we can do better.

4. Introduce a new pair of methods, ->port_setup and ->port_teardown,
   which in the case of mv88e6xxx must register and unregister the
   devlink port regions. Call these 2 methods when the port must be
   reinitialized as unused.

Naturally, I went for the 4th approach.

Fixes: 08156ba430b4 ("net: dsa: Add devlink port regions support to DSA")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mv88e6xxx/chip.c    | 16 ++++++-
 drivers/net/dsa/mv88e6xxx/devlink.c | 73 ++++-------------------------
 drivers/net/dsa/mv88e6xxx/devlink.h |  6 ++-
 include/net/dsa.h                   |  8 ++++
 net/dsa/dsa2.c                      | 51 ++++++++++++++++++--
 5 files changed, 81 insertions(+), 73 deletions(-)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 111a6d5985da..1c122a1f2f97 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3012,7 +3012,7 @@ static void mv88e6xxx_teardown(struct dsa_switch *ds)
 {
 	mv88e6xxx_teardown_devlink_params(ds);
 	dsa_devlink_resources_unregister(ds);
-	mv88e6xxx_teardown_devlink_regions(ds);
+	mv88e6xxx_teardown_devlink_regions_global(ds);
 }
 
 static int mv88e6xxx_setup(struct dsa_switch *ds)
@@ -3147,7 +3147,7 @@ static int mv88e6xxx_setup(struct dsa_switch *ds)
 	if (err)
 		goto out_resources;
 
-	err = mv88e6xxx_setup_devlink_regions(ds);
+	err = mv88e6xxx_setup_devlink_regions_global(ds);
 	if (err)
 		goto out_params;
 
@@ -3161,6 +3161,16 @@ static int mv88e6xxx_setup(struct dsa_switch *ds)
 	return err;
 }
 
+static int mv88e6xxx_port_setup(struct dsa_switch *ds, int port)
+{
+	return mv88e6xxx_setup_devlink_regions_port(ds, port);
+}
+
+static void mv88e6xxx_port_teardown(struct dsa_switch *ds, int port)
+{
+	mv88e6xxx_teardown_devlink_regions_port(ds, port);
+}
+
 /* prod_id for switch families which do not have a PHY model number */
 static const u16 family_prod_id_table[] = {
 	[MV88E6XXX_FAMILY_6341] = MV88E6XXX_PORT_SWITCH_ID_PROD_6341,
@@ -6055,6 +6065,8 @@ static const struct dsa_switch_ops mv88e6xxx_switch_ops = {
 	.change_tag_protocol	= mv88e6xxx_change_tag_protocol,
 	.setup			= mv88e6xxx_setup,
 	.teardown		= mv88e6xxx_teardown,
+	.port_setup		= mv88e6xxx_port_setup,
+	.port_teardown		= mv88e6xxx_port_teardown,
 	.phylink_validate	= mv88e6xxx_validate,
 	.phylink_mac_link_state	= mv88e6xxx_serdes_pcs_get_state,
 	.phylink_mac_config	= mv88e6xxx_mac_config,
diff --git a/drivers/net/dsa/mv88e6xxx/devlink.c b/drivers/net/dsa/mv88e6xxx/devlink.c
index 0c0f5ea6680c..381068395c63 100644
--- a/drivers/net/dsa/mv88e6xxx/devlink.c
+++ b/drivers/net/dsa/mv88e6xxx/devlink.c
@@ -647,26 +647,25 @@ static struct mv88e6xxx_region mv88e6xxx_regions[] = {
 	},
 };
 
-static void
-mv88e6xxx_teardown_devlink_regions_global(struct mv88e6xxx_chip *chip)
+void mv88e6xxx_teardown_devlink_regions_global(struct dsa_switch *ds)
 {
+	struct mv88e6xxx_chip *chip = ds->priv;
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(mv88e6xxx_regions); i++)
 		dsa_devlink_region_destroy(chip->regions[i]);
 }
 
-static void
-mv88e6xxx_teardown_devlink_regions_port(struct mv88e6xxx_chip *chip,
-					int port)
+void mv88e6xxx_teardown_devlink_regions_port(struct dsa_switch *ds, int port)
 {
+	struct mv88e6xxx_chip *chip = ds->priv;
+
 	dsa_devlink_region_destroy(chip->ports[port].region);
 }
 
-static int mv88e6xxx_setup_devlink_regions_port(struct dsa_switch *ds,
-						struct mv88e6xxx_chip *chip,
-						int port)
+int mv88e6xxx_setup_devlink_regions_port(struct dsa_switch *ds, int port)
 {
+	struct mv88e6xxx_chip *chip = ds->priv;
 	struct devlink_region *region;
 
 	region = dsa_devlink_port_region_create(ds,
@@ -681,40 +680,10 @@ static int mv88e6xxx_setup_devlink_regions_port(struct dsa_switch *ds,
 	return 0;
 }
 
-static void
-mv88e6xxx_teardown_devlink_regions_ports(struct mv88e6xxx_chip *chip)
-{
-	int port;
-
-	for (port = 0; port < mv88e6xxx_num_ports(chip); port++)
-		mv88e6xxx_teardown_devlink_regions_port(chip, port);
-}
-
-static int mv88e6xxx_setup_devlink_regions_ports(struct dsa_switch *ds,
-						 struct mv88e6xxx_chip *chip)
-{
-	int port;
-	int err;
-
-	for (port = 0; port < mv88e6xxx_num_ports(chip); port++) {
-		err = mv88e6xxx_setup_devlink_regions_port(ds, chip, port);
-		if (err)
-			goto out;
-	}
-
-	return 0;
-
-out:
-	while (port-- > 0)
-		mv88e6xxx_teardown_devlink_regions_port(chip, port);
-
-	return err;
-}
-
-static int mv88e6xxx_setup_devlink_regions_global(struct dsa_switch *ds,
-						  struct mv88e6xxx_chip *chip)
+int mv88e6xxx_setup_devlink_regions_global(struct dsa_switch *ds)
 {
 	bool (*cond)(struct mv88e6xxx_chip *chip);
+	struct mv88e6xxx_chip *chip = ds->priv;
 	struct devlink_region_ops *ops;
 	struct devlink_region *region;
 	u64 size;
@@ -753,30 +722,6 @@ static int mv88e6xxx_setup_devlink_regions_global(struct dsa_switch *ds,
 	return PTR_ERR(region);
 }
 
-int mv88e6xxx_setup_devlink_regions(struct dsa_switch *ds)
-{
-	struct mv88e6xxx_chip *chip = ds->priv;
-	int err;
-
-	err = mv88e6xxx_setup_devlink_regions_global(ds, chip);
-	if (err)
-		return err;
-
-	err = mv88e6xxx_setup_devlink_regions_ports(ds, chip);
-	if (err)
-		mv88e6xxx_teardown_devlink_regions_global(chip);
-
-	return err;
-}
-
-void mv88e6xxx_teardown_devlink_regions(struct dsa_switch *ds)
-{
-	struct mv88e6xxx_chip *chip = ds->priv;
-
-	mv88e6xxx_teardown_devlink_regions_ports(chip);
-	mv88e6xxx_teardown_devlink_regions_global(chip);
-}
-
 int mv88e6xxx_devlink_info_get(struct dsa_switch *ds,
 			       struct devlink_info_req *req,
 			       struct netlink_ext_ack *extack)
diff --git a/drivers/net/dsa/mv88e6xxx/devlink.h b/drivers/net/dsa/mv88e6xxx/devlink.h
index 3d72db3dcf95..65ce6a6858b9 100644
--- a/drivers/net/dsa/mv88e6xxx/devlink.h
+++ b/drivers/net/dsa/mv88e6xxx/devlink.h
@@ -12,8 +12,10 @@ int mv88e6xxx_devlink_param_get(struct dsa_switch *ds, u32 id,
 				struct devlink_param_gset_ctx *ctx);
 int mv88e6xxx_devlink_param_set(struct dsa_switch *ds, u32 id,
 				struct devlink_param_gset_ctx *ctx);
-int mv88e6xxx_setup_devlink_regions(struct dsa_switch *ds);
-void mv88e6xxx_teardown_devlink_regions(struct dsa_switch *ds);
+int mv88e6xxx_setup_devlink_regions_global(struct dsa_switch *ds);
+void mv88e6xxx_teardown_devlink_regions_global(struct dsa_switch *ds);
+int mv88e6xxx_setup_devlink_regions_port(struct dsa_switch *ds, int port);
+void mv88e6xxx_teardown_devlink_regions_port(struct dsa_switch *ds, int port);
 
 int mv88e6xxx_devlink_info_get(struct dsa_switch *ds,
 			       struct devlink_info_req *req,
diff --git a/include/net/dsa.h b/include/net/dsa.h
index d833f717e802..004514a21e30 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -575,8 +575,16 @@ struct dsa_switch_ops {
 	int	(*change_tag_protocol)(struct dsa_switch *ds, int port,
 				       enum dsa_tag_protocol proto);
 
+	/* Optional switch-wide initialization and destruction methods */
 	int	(*setup)(struct dsa_switch *ds);
 	void	(*teardown)(struct dsa_switch *ds);
+
+	/* Per-port initialization and destruction methods. Mandatory if the
+	 * driver registers devlink port regions, optional otherwise.
+	 */
+	int	(*port_setup)(struct dsa_switch *ds, int port);
+	void	(*port_teardown)(struct dsa_switch *ds, int port);
+
 	u32	(*get_phy_flags)(struct dsa_switch *ds, int port);
 
 	/*
diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c
index 79267b00af68..3a8136d5915d 100644
--- a/net/dsa/dsa2.c
+++ b/net/dsa/dsa2.c
@@ -342,6 +342,7 @@ static int dsa_port_setup(struct dsa_port *dp)
 {
 	struct devlink_port *dlp = &dp->devlink_port;
 	bool dsa_port_link_registered = false;
+	struct dsa_switch *ds = dp->ds;
 	bool dsa_port_enabled = false;
 	int err = 0;
 
@@ -351,6 +352,12 @@ static int dsa_port_setup(struct dsa_port *dp)
 	INIT_LIST_HEAD(&dp->fdbs);
 	INIT_LIST_HEAD(&dp->mdbs);
 
+	if (ds->ops->port_setup) {
+		err = ds->ops->port_setup(ds, dp->index);
+		if (err)
+			return err;
+	}
+
 	switch (dp->type) {
 	case DSA_PORT_TYPE_UNUSED:
 		dsa_port_disable(dp);
@@ -393,8 +400,11 @@ static int dsa_port_setup(struct dsa_port *dp)
 		dsa_port_disable(dp);
 	if (err && dsa_port_link_registered)
 		dsa_port_link_unregister_of(dp);
-	if (err)
+	if (err) {
+		if (ds->ops->port_teardown)
+			ds->ops->port_teardown(ds, dp->index);
 		return err;
+	}
 
 	dp->setup = true;
 
@@ -446,11 +456,15 @@ static int dsa_port_devlink_setup(struct dsa_port *dp)
 static void dsa_port_teardown(struct dsa_port *dp)
 {
 	struct devlink_port *dlp = &dp->devlink_port;
+	struct dsa_switch *ds = dp->ds;
 	struct dsa_mac_addr *a, *tmp;
 
 	if (!dp->setup)
 		return;
 
+	if (ds->ops->port_teardown)
+		ds->ops->port_teardown(ds, dp->index);
+
 	devlink_port_type_clear(dlp);
 
 	switch (dp->type) {
@@ -494,6 +508,36 @@ static void dsa_port_devlink_teardown(struct dsa_port *dp)
 	dp->devlink_port_setup = false;
 }
 
+/* Destroy the current devlink port, and create a new one which has the UNUSED
+ * flavour. At this point, any call to ds->ops->port_setup has been already
+ * balanced out by a call to ds->ops->port_teardown, so we know that any
+ * devlink port regions the driver had are now unregistered. We then call its
+ * ds->ops->port_setup again, in order for the driver to re-create them on the
+ * new devlink port.
+ */
+static int dsa_port_reinit_as_unused(struct dsa_port *dp)
+{
+	struct dsa_switch *ds = dp->ds;
+	int err;
+
+	dsa_port_devlink_teardown(dp);
+	dp->type = DSA_PORT_TYPE_UNUSED;
+	err = dsa_port_devlink_setup(dp);
+	if (err)
+		return err;
+
+	if (ds->ops->port_setup) {
+		/* On error, leave the devlink port registered,
+		 * dsa_switch_teardown will clean it up later.
+		 */
+		err = ds->ops->port_setup(ds, dp->index);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
 static int dsa_devlink_info_get(struct devlink *dl,
 				struct devlink_info_req *req,
 				struct netlink_ext_ack *extack)
@@ -850,12 +894,9 @@ static int dsa_tree_setup_switches(struct dsa_switch_tree *dst)
 	list_for_each_entry(dp, &dst->ports, list) {
 		err = dsa_port_setup(dp);
 		if (err) {
-			dsa_port_devlink_teardown(dp);
-			dp->type = DSA_PORT_TYPE_UNUSED;
-			err = dsa_port_devlink_setup(dp);
+			err = dsa_port_reinit_as_unused(dp);
 			if (err)
 				goto teardown;
-			continue;
 		}
 	}
 
-- 
2.33.0

[PATCH 5.14 060/162] net: bgmac-bcma: handle deferred probe error due to mac-address

[Greg Kroah-Hartman]

From: Christian Lamparter <chunkeey@gmail.com>

[ Upstream commit 029497e66bdc762e001880e4c85a91f35a54b1e2 ]

Due to the inclusion of nvmem handling into the mac-address getter
function of_get_mac_address() by
commit d01f449c008a ("of_net: add NVMEM support to of_get_mac_address")
it is now possible to get a -EPROBE_DEFER return code. Which did cause
bgmac to assign a random ethernet address.

This exact issue happened on my Meraki MR32. The nvmem provider is
an EEPROM (at24c64) which gets instantiated once the module
driver is loaded... This happens once the filesystem becomes available.

With this patch, bgmac_probe() will propagate the -EPROBE_DEFER error.
Then the driver subsystem will reschedule the probe at a later time.

Cc: Petr Štetiar <ynezz@true.cz>
Cc: Michael Walle <michael@walle.cc>
Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bgmac-bcma.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/bgmac-bcma.c b/drivers/net/ethernet/broadcom/bgmac-bcma.c
index 85fa0ab7201c..9513cfb5ba58 100644
--- a/drivers/net/ethernet/broadcom/bgmac-bcma.c
+++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c
@@ -129,6 +129,8 @@ static int bgmac_probe(struct bcma_device *core)
 	bcma_set_drvdata(core, bgmac);
 
 	err = of_get_mac_address(bgmac->dev->of_node, bgmac->net_dev->dev_addr);
+	if (err == -EPROBE_DEFER)
+		return err;
 
 	/* If no MAC address assigned via device tree, check SPROM */
 	if (err) {
-- 
2.33.0

[PATCH 5.14 061/162] napi: fix race inside napi_enable

[Greg Kroah-Hartman]

From: Xuan Zhuo <xuanzhuo@linux.alibaba.com>

[ Upstream commit 3765996e4f0b8a755cab215a08df744490c76052 ]

The process will cause napi.state to contain NAPI_STATE_SCHED and
not in the poll_list, which will cause napi_disable() to get stuck.

The prefix "NAPI_STATE_" is removed in the figure below, and
NAPI_STATE_HASHED is ignored in napi.state.

                      CPU0       |                   CPU1       | napi.state
===============================================================================
napi_disable()                   |                              | SCHED | NPSVC
napi_enable()                    |                              |
{                                |                              |
    smp_mb__before_atomic();     |                              |
    clear_bit(SCHED, &n->state); |                              | NPSVC
                                 | napi_schedule_prep()         | SCHED | NPSVC
                                 | napi_poll()                  |
                                 |   napi_complete_done()       |
                                 |   {                          |
                                 |      if (n->state & (NPSVC | | (1)
                                 |               _BUSY_POLL)))  |
                                 |           return false;      |
                                 |     ................         |
                                 |   }                          | SCHED | NPSVC
                                 |                              |
    clear_bit(NPSVC, &n->state); |                              | SCHED
}                                |                              |
                                 |                              |
napi_schedule_prep()             |                              | SCHED | MISSED (2)

(1) Here return direct. Because of NAPI_STATE_NPSVC exists.
(2) NAPI_STATE_SCHED exists. So not add napi.poll_list to sd->poll_list

Since NAPI_STATE_SCHED already exists and napi is not in the
sd->poll_list queue, NAPI_STATE_SCHED cannot be cleared and will always
exist.

1. This will cause this queue to no longer receive packets.
2. If you encounter napi_disable under the protection of rtnl_lock, it
   will cause the entire rtnl_lock to be locked, affecting the overall
   system.

This patch uses cmpxchg to implement napi_enable(), which ensures that
there will be no race due to the separation of clear two bits.

Fixes: 2d8bff12699abc ("netpoll: Close race condition between poll_one_napi and napi_disable")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/dev.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/net/core/dev.c b/net/core/dev.c
index 8f1a47ad6781..693f15a05630 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -6988,12 +6988,16 @@ EXPORT_SYMBOL(napi_disable);
  */
 void napi_enable(struct napi_struct *n)
 {
-	BUG_ON(!test_bit(NAPI_STATE_SCHED, &n->state));
-	smp_mb__before_atomic();
-	clear_bit(NAPI_STATE_SCHED, &n->state);
-	clear_bit(NAPI_STATE_NPSVC, &n->state);
-	if (n->dev->threaded && n->thread)
-		set_bit(NAPI_STATE_THREADED, &n->state);
+	unsigned long val, new;
+
+	do {
+		val = READ_ONCE(n->state);
+		BUG_ON(!test_bit(NAPI_STATE_SCHED, &val));
+
+		new = val & ~(NAPIF_STATE_SCHED | NAPIF_STATE_NPSVC);
+		if (n->dev->threaded && n->thread)
+			new |= NAPIF_STATE_THREADED;
+	} while (cmpxchg(&n->state, val, new) != val);
 }
 EXPORT_SYMBOL(napi_enable);
 
-- 
2.33.0

[PATCH 5.14 062/162] bnxt_en: Fix TX timeout when TX ring size is set to the smallest

[Greg Kroah-Hartman]

From: Michael Chan <michael.chan@broadcom.com>

[ Upstream commit 5bed8b0704c9ecccc8f4a2c377d7c8e21090a82e ]

The smallest TX ring size we support must fit a TX SKB with MAX_SKB_FRAGS
+ 1.  Because the first TX BD for a packet is always a long TX BD, we
need an extra TX BD to fit this packet.  Define BNXT_MIN_TX_DESC_CNT with
this value to make this more clear.  The current code uses a minimum
that is off by 1.  Fix it using this constant.

The tx_wake_thresh to determine when to wake up the TX queue is half the
ring size but we must have at least BNXT_MIN_TX_DESC_CNT for the next
packet which may have maximum fragments.  So the comparison of the
available TX BDs with tx_wake_thresh should be >= instead of > in the
current code.  Otherwise, at the smallest ring size, we will never wake
up the TX queue and will cause TX timeout.

Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadocm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c         | 8 ++++----
 drivers/net/ethernet/broadcom/bnxt/bnxt.h         | 5 +++++
 drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 2 +-
 3 files changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index fdbf47446a99..f20b57b8cd70 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -385,7 +385,7 @@ static bool bnxt_txr_netif_try_stop_queue(struct bnxt *bp,
 	 * netif_tx_queue_stopped().
 	 */
 	smp_mb();
-	if (bnxt_tx_avail(bp, txr) > bp->tx_wake_thresh) {
+	if (bnxt_tx_avail(bp, txr) >= bp->tx_wake_thresh) {
 		netif_tx_wake_queue(txq);
 		return false;
 	}
@@ -758,7 +758,7 @@ static void bnxt_tx_int(struct bnxt *bp, struct bnxt_napi *bnapi, int nr_pkts)
 	smp_mb();
 
 	if (unlikely(netif_tx_queue_stopped(txq)) &&
-	    bnxt_tx_avail(bp, txr) > bp->tx_wake_thresh &&
+	    bnxt_tx_avail(bp, txr) >= bp->tx_wake_thresh &&
 	    READ_ONCE(txr->dev_state) != BNXT_DEV_STATE_CLOSING)
 		netif_tx_wake_queue(txq);
 }
@@ -2375,7 +2375,7 @@ static int __bnxt_poll_work(struct bnxt *bp, struct bnxt_cp_ring_info *cpr,
 		if (TX_CMP_TYPE(txcmp) == CMP_TYPE_TX_L2_CMP) {
 			tx_pkts++;
 			/* return full budget so NAPI will complete. */
-			if (unlikely(tx_pkts > bp->tx_wake_thresh)) {
+			if (unlikely(tx_pkts >= bp->tx_wake_thresh)) {
 				rx_pkts = budget;
 				raw_cons = NEXT_RAW_CMP(raw_cons);
 				if (budget)
@@ -3531,7 +3531,7 @@ static int bnxt_init_tx_rings(struct bnxt *bp)
 	u16 i;
 
 	bp->tx_wake_thresh = max_t(int, bp->tx_ring_size / 2,
-				   MAX_SKB_FRAGS + 1);
+				   BNXT_MIN_TX_DESC_CNT);
 
 	for (i = 0; i < bp->tx_nr_rings; i++) {
 		struct bnxt_tx_ring_info *txr = &bp->tx_ring[i];
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index ba4e0fc38520..d4dca4508d26 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -615,6 +615,11 @@ struct nqe_cn {
 #define BNXT_MAX_RX_JUM_DESC_CNT	(RX_DESC_CNT * MAX_RX_AGG_PAGES - 1)
 #define BNXT_MAX_TX_DESC_CNT		(TX_DESC_CNT * MAX_TX_PAGES - 1)
 
+/* Minimum TX BDs for a TX packet with MAX_SKB_FRAGS + 1.  We need one extra
+ * BD because the first TX BD is always a long BD.
+ */
+#define BNXT_MIN_TX_DESC_CNT		(MAX_SKB_FRAGS + 2)
+
 #define RX_RING(x)	(((x) & ~(RX_DESC_CNT - 1)) >> (BNXT_PAGE_SHIFT - 4))
 #define RX_IDX(x)	((x) & (RX_DESC_CNT - 1))
 
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index 786ca51e669b..3a8c28463592 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -784,7 +784,7 @@ static int bnxt_set_ringparam(struct net_device *dev,
 
 	if ((ering->rx_pending > BNXT_MAX_RX_DESC_CNT) ||
 	    (ering->tx_pending > BNXT_MAX_TX_DESC_CNT) ||
-	    (ering->tx_pending <= MAX_SKB_FRAGS))
+	    (ering->tx_pending < BNXT_MIN_TX_DESC_CNT))
 		return -EINVAL;
 
 	if (netif_running(dev))
-- 
2.33.0

[PATCH 5.14 063/162] net: hns3: fix change RSS hfunc ineffective issue

[Greg Kroah-Hartman]

From: Jian Shen <shenjian15@huawei.com>

[ Upstream commit e184cec5e29d8eb3c3435b12a9074b75e2d69e4a ]

When user change rss 'hfunc' without set rss 'hkey' by ethtool
-X command, the driver will ignore the 'hfunc' for the hkey is
NULL. It's unreasonable. So fix it.

Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Fixes: 374ad291762a ("net: hns3: Add RSS general configuration support for VF")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../hisilicon/hns3/hns3pf/hclge_main.c        | 45 ++++++++++------
 .../hisilicon/hns3/hns3vf/hclgevf_main.c      | 52 ++++++++++++-------
 2 files changed, 64 insertions(+), 33 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 72d55c028ac4..40c4949eed4d 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -4734,6 +4734,24 @@ static int hclge_get_rss(struct hnae3_handle *handle, u32 *indir,
 	return 0;
 }
 
+static int hclge_parse_rss_hfunc(struct hclge_vport *vport, const u8 hfunc,
+				 u8 *hash_algo)
+{
+	switch (hfunc) {
+	case ETH_RSS_HASH_TOP:
+		*hash_algo = HCLGE_RSS_HASH_ALGO_TOEPLITZ;
+		return 0;
+	case ETH_RSS_HASH_XOR:
+		*hash_algo = HCLGE_RSS_HASH_ALGO_SIMPLE;
+		return 0;
+	case ETH_RSS_HASH_NO_CHANGE:
+		*hash_algo = vport->rss_algo;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
 static int hclge_set_rss(struct hnae3_handle *handle, const u32 *indir,
 			 const  u8 *key, const  u8 hfunc)
 {
@@ -4743,30 +4761,27 @@ static int hclge_set_rss(struct hnae3_handle *handle, const u32 *indir,
 	u8 hash_algo;
 	int ret, i;
 
+	ret = hclge_parse_rss_hfunc(vport, hfunc, &hash_algo);
+	if (ret) {
+		dev_err(&hdev->pdev->dev, "invalid hfunc type %u\n", hfunc);
+		return ret;
+	}
+
 	/* Set the RSS Hash Key if specififed by the user */
 	if (key) {
-		switch (hfunc) {
-		case ETH_RSS_HASH_TOP:
-			hash_algo = HCLGE_RSS_HASH_ALGO_TOEPLITZ;
-			break;
-		case ETH_RSS_HASH_XOR:
-			hash_algo = HCLGE_RSS_HASH_ALGO_SIMPLE;
-			break;
-		case ETH_RSS_HASH_NO_CHANGE:
-			hash_algo = vport->rss_algo;
-			break;
-		default:
-			return -EINVAL;
-		}
-
 		ret = hclge_set_rss_algo_key(hdev, hash_algo, key);
 		if (ret)
 			return ret;
 
 		/* Update the shadow RSS key with user specified qids */
 		memcpy(vport->rss_hash_key, key, HCLGE_RSS_KEY_SIZE);
-		vport->rss_algo = hash_algo;
+	} else {
+		ret = hclge_set_rss_algo_key(hdev, hash_algo,
+					     vport->rss_hash_key);
+		if (ret)
+			return ret;
 	}
+	vport->rss_algo = hash_algo;
 
 	/* Update the shadow RSS table with user specified qids */
 	for (i = 0; i < ae_dev->dev_specs.rss_ind_tbl_size; i++)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index be3ea7023ed8..22cf66004dfa 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -814,40 +814,56 @@ static int hclgevf_get_rss(struct hnae3_handle *handle, u32 *indir, u8 *key,
 	return 0;
 }
 
+static int hclgevf_parse_rss_hfunc(struct hclgevf_dev *hdev, const u8 hfunc,
+				   u8 *hash_algo)
+{
+	switch (hfunc) {
+	case ETH_RSS_HASH_TOP:
+		*hash_algo = HCLGEVF_RSS_HASH_ALGO_TOEPLITZ;
+		return 0;
+	case ETH_RSS_HASH_XOR:
+		*hash_algo = HCLGEVF_RSS_HASH_ALGO_SIMPLE;
+		return 0;
+	case ETH_RSS_HASH_NO_CHANGE:
+		*hash_algo = hdev->rss_cfg.hash_algo;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
 static int hclgevf_set_rss(struct hnae3_handle *handle, const u32 *indir,
 			   const u8 *key, const u8 hfunc)
 {
 	struct hclgevf_dev *hdev = hclgevf_ae_get_hdev(handle);
 	struct hclgevf_rss_cfg *rss_cfg = &hdev->rss_cfg;
+	u8 hash_algo;
 	int ret, i;
 
 	if (hdev->ae_dev->dev_version >= HNAE3_DEVICE_VERSION_V2) {
+		ret = hclgevf_parse_rss_hfunc(hdev, hfunc, &hash_algo);
+		if (ret)
+			return ret;
+
 		/* Set the RSS Hash Key if specififed by the user */
 		if (key) {
-			switch (hfunc) {
-			case ETH_RSS_HASH_TOP:
-				rss_cfg->hash_algo =
-					HCLGEVF_RSS_HASH_ALGO_TOEPLITZ;
-				break;
-			case ETH_RSS_HASH_XOR:
-				rss_cfg->hash_algo =
-					HCLGEVF_RSS_HASH_ALGO_SIMPLE;
-				break;
-			case ETH_RSS_HASH_NO_CHANGE:
-				break;
-			default:
-				return -EINVAL;
-			}
-
-			ret = hclgevf_set_rss_algo_key(hdev, rss_cfg->hash_algo,
-						       key);
-			if (ret)
+			ret = hclgevf_set_rss_algo_key(hdev, hash_algo, key);
+			if (ret) {
+				dev_err(&hdev->pdev->dev,
+					"invalid hfunc type %u\n", hfunc);
 				return ret;
+			}
 
 			/* Update the shadow RSS key with user specified qids */
 			memcpy(rss_cfg->rss_hash_key, key,
 			       HCLGEVF_RSS_KEY_SIZE);
+		} else {
+			ret = hclgevf_set_rss_algo_key(hdev, hash_algo,
+						       rss_cfg->rss_hash_key);
+			if (ret)
+				return ret;
 		}
+		rss_cfg->hash_algo = hash_algo;
 	}
 
 	/* update the shadow RSS table with user specified qids */
-- 
2.33.0

[PATCH 5.14 064/162] net: hns3: fix inconsistent vf id print

[Greg Kroah-Hartman]

From: Jian Shen <shenjian15@huawei.com>

[ Upstream commit 91bc0d5272d3a4dc3d4fd2a74387c7e7361bbe96 ]

The vf id from ethtool is added 1 before configured to driver.
So it's necessary to minus 1 when printing it, in order to
keep consistent with user's configuration.

Fixes: dd74f815dd41 ("net: hns3: Add support for rule add/delete for flow director")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 40c4949eed4d..45faf924bc36 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -6635,10 +6635,13 @@ static int hclge_fd_parse_ring_cookie(struct hclge_dev *hdev, u64 ring_cookie,
 		u8 vf = ethtool_get_flow_spec_ring_vf(ring_cookie);
 		u16 tqps;
 
+		/* To keep consistent with user's configuration, minus 1 when
+		 * printing 'vf', because vf id from ethtool is added 1 for vf.
+		 */
 		if (vf > hdev->num_req_vfs) {
 			dev_err(&hdev->pdev->dev,
-				"Error: vf id (%u) > max vf num (%u)\n",
-				vf, hdev->num_req_vfs);
+				"Error: vf id (%u) should be less than %u\n",
+				vf - 1, hdev->num_req_vfs);
 			return -EINVAL;
 		}
 
-- 
2.33.0

[PATCH 5.14 065/162] net: hns3: fix misuse vf id and vport id in some logs

[Greg Kroah-Hartman]

From: Jiaran Zhang <zhangjiaran@huawei.com>

[ Upstream commit 311c0aaa9b4bb8dc65f22634e15963316b17c921 ]

vport_id include PF and VFs, vport_id = 0 means PF, other values mean VFs.
So the actual vf id is equal to vport_id minus 1.

Some VF print logs are actually vport, and logs of vf id actually use
vport id, so this patch fixes them.

Fixes: ac887be5b0fe ("net: hns3: change print level of RAS error log from warning to error")
Fixes: adcf738b804b ("net: hns3: cleanup some print format warning")
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c |  8 ++++----
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c    | 10 ++++++----
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c |  2 +-
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c  |  2 +-
 4 files changed, 12 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c
index ec9a7f8bc3fe..2eeafd61a07e 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c
@@ -1878,12 +1878,12 @@ static void hclge_handle_over_8bd_err(struct hclge_dev *hdev,
 		return;
 	}
 
-	dev_err(dev, "PPU_PF_ABNORMAL_INT_ST over_8bd_no_fe found, vf_id(%u), queue_id(%u)\n",
+	dev_err(dev, "PPU_PF_ABNORMAL_INT_ST over_8bd_no_fe found, vport(%u), queue_id(%u)\n",
 		vf_id, q_id);
 
 	if (vf_id) {
 		if (vf_id >= hdev->num_alloc_vport) {
-			dev_err(dev, "invalid vf id(%u)\n", vf_id);
+			dev_err(dev, "invalid vport(%u)\n", vf_id);
 			return;
 		}
 
@@ -1896,8 +1896,8 @@ static void hclge_handle_over_8bd_err(struct hclge_dev *hdev,
 
 		ret = hclge_inform_reset_assert_to_vf(&hdev->vport[vf_id]);
 		if (ret)
-			dev_err(dev, "inform reset to vf(%u) failed %d!\n",
-				hdev->vport->vport_id, ret);
+			dev_err(dev, "inform reset to vport(%u) failed %d!\n",
+				vf_id, ret);
 	} else {
 		set_bit(HNAE3_FUNC_RESET, reset_requests);
 	}
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 45faf924bc36..3f8d56ccc057 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -3660,7 +3660,8 @@ static int hclge_set_all_vf_rst(struct hclge_dev *hdev, bool reset)
 		if (ret) {
 			dev_err(&hdev->pdev->dev,
 				"set vf(%u) rst failed %d!\n",
-				vport->vport_id, ret);
+				vport->vport_id - HCLGE_VF_VPORT_START_NUM,
+				ret);
 			return ret;
 		}
 
@@ -3675,7 +3676,8 @@ static int hclge_set_all_vf_rst(struct hclge_dev *hdev, bool reset)
 		if (ret)
 			dev_warn(&hdev->pdev->dev,
 				 "inform reset to vf(%u) failed %d!\n",
-				 vport->vport_id, ret);
+				 vport->vport_id - HCLGE_VF_VPORT_START_NUM,
+				 ret);
 	}
 
 	return 0;
@@ -11460,11 +11462,11 @@ static void hclge_clear_resetting_state(struct hclge_dev *hdev)
 		struct hclge_vport *vport = &hdev->vport[i];
 		int ret;
 
-		 /* Send cmd to clear VF's FUNC_RST_ING */
+		 /* Send cmd to clear vport's FUNC_RST_ING */
 		ret = hclge_set_vf_rst(hdev, vport->vport_id, false);
 		if (ret)
 			dev_warn(&hdev->pdev->dev,
-				 "clear vf(%u) rst failed %d!\n",
+				 "clear vport(%u) rst failed %d!\n",
 				 vport->vport_id, ret);
 	}
 }
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
index 0dbed35645ed..91c32f99b644 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
@@ -564,7 +564,7 @@ static int hclge_reset_vf(struct hclge_vport *vport)
 	struct hclge_dev *hdev = vport->back;
 
 	dev_warn(&hdev->pdev->dev, "PF received VF reset request from VF %u!",
-		 vport->vport_id);
+		 vport->vport_id - HCLGE_VF_VPORT_START_NUM);
 
 	return hclge_func_reset_cmd(hdev, vport->vport_id);
 }
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
index 78d5bf1ea561..44618cc4cca1 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
@@ -581,7 +581,7 @@ int hclge_tm_qs_shaper_cfg(struct hclge_vport *vport, int max_tx_rate)
 		ret = hclge_cmd_send(&hdev->hw, &desc, 1);
 		if (ret) {
 			dev_err(&hdev->pdev->dev,
-				"vf%u, qs%u failed to set tx_rate:%d, ret=%d\n",
+				"vport%u, qs%u failed to set tx_rate:%d, ret=%d\n",
 				vport->vport_id, shap_cfg_cmd->qs_id,
 				max_tx_rate, ret);
 			return ret;
-- 
2.33.0

[PATCH 5.14 066/162] net: hns3: check queue id range before using

[Greg Kroah-Hartman]

From: Yufeng Mo <moyufeng@huawei.com>

[ Upstream commit 63b1279d9905100a14da9e043de7b28e99dba3f8 ]

The input parameters may not be reliable. Before using the
queue id, we should check this parameter. Otherwise, memory
overwriting may occur.

Fixes: d34100184685 ("net: hns3: refactor the mailbox message between PF and VF")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
index 91c32f99b644..c1a4b79a7050 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
@@ -588,9 +588,17 @@ static void hclge_get_queue_id_in_pf(struct hclge_vport *vport,
 				     struct hclge_mbx_vf_to_pf_cmd *mbx_req,
 				     struct hclge_respond_to_vf_msg *resp_msg)
 {
+	struct hnae3_handle *handle = &vport->nic;
+	struct hclge_dev *hdev = vport->back;
 	u16 queue_id, qid_in_pf;
 
 	memcpy(&queue_id, mbx_req->msg.data, sizeof(queue_id));
+	if (queue_id >= handle->kinfo.num_tqps) {
+		dev_err(&hdev->pdev->dev, "Invalid queue id(%u) from VF %u\n",
+			queue_id, mbx_req->mbx_src_vfid);
+		return;
+	}
+
 	qid_in_pf = hclge_covert_handle_qid_global(&vport->nic, queue_id);
 	memcpy(resp_msg->data, &qid_in_pf, sizeof(qid_in_pf));
 	resp_msg->len = sizeof(qid_in_pf);
-- 
2.33.0

[PATCH 5.14 067/162] net: hns3: check vlan id before using it

[Greg Kroah-Hartman]

From: liaoguojia <liaoguojia@huawei.com>

[ Upstream commit ef39d632608e66f428c1246836fd060cf4818d67 ]

The input parameters may not be reliable, so check the vlan id before
using it, otherwise may set wrong vlan id into hardware.

Fixes: dc8131d846d4 ("net: hns3: Fix for packet loss due wrong filter config in VLAN tbls")
Signed-off-by: liaoguojia <liaoguojia@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 3f8d56ccc057..556dfc854763 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -9810,6 +9810,9 @@ static int hclge_set_vlan_filter_hw(struct hclge_dev *hdev, __be16 proto,
 	if (is_kill && !vlan_id)
 		return 0;
 
+	if (vlan_id >= VLAN_N_VID)
+		return -EINVAL;
+
 	ret = hclge_set_vf_vlan_common(hdev, vport_id, is_kill, vlan_id);
 	if (ret) {
 		dev_err(&hdev->pdev->dev,
-- 
2.33.0

[PATCH 5.14 068/162] net: hns3: fix a return value error in hclge_get_reset_status()

[Greg Kroah-Hartman]

From: Yufeng Mo <moyufeng@huawei.com>

[ Upstream commit 5126b9d3d4acdebc12b9d436282f88d8a1b5146c ]

hclge_get_reset_status() should return the tqp reset status.
However, if the CMDQ fails, the caller will take it as tqp reset
success status by mistake. Therefore, uses a parameters to get
the tqp reset status instead.

Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c   | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 556dfc854763..90a72c79fec9 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -10719,7 +10719,8 @@ static int hclge_reset_tqp_cmd_send(struct hclge_dev *hdev, u16 queue_id,
 	return 0;
 }
 
-static int hclge_get_reset_status(struct hclge_dev *hdev, u16 queue_id)
+static int hclge_get_reset_status(struct hclge_dev *hdev, u16 queue_id,
+				  u8 *reset_status)
 {
 	struct hclge_reset_tqp_queue_cmd *req;
 	struct hclge_desc desc;
@@ -10737,7 +10738,9 @@ static int hclge_get_reset_status(struct hclge_dev *hdev, u16 queue_id)
 		return ret;
 	}
 
-	return hnae3_get_bit(req->ready_to_reset, HCLGE_TQP_RESET_B);
+	*reset_status = hnae3_get_bit(req->ready_to_reset, HCLGE_TQP_RESET_B);
+
+	return 0;
 }
 
 u16 hclge_covert_handle_qid_global(struct hnae3_handle *handle, u16 queue_id)
@@ -10756,7 +10759,7 @@ static int hclge_reset_tqp_cmd(struct hnae3_handle *handle)
 	struct hclge_vport *vport = hclge_get_vport(handle);
 	struct hclge_dev *hdev = vport->back;
 	u16 reset_try_times = 0;
-	int reset_status;
+	u8 reset_status;
 	u16 queue_gid;
 	int ret;
 	u16 i;
@@ -10772,7 +10775,11 @@ static int hclge_reset_tqp_cmd(struct hnae3_handle *handle)
 		}
 
 		while (reset_try_times++ < HCLGE_TQP_RESET_TRY_TIMES) {
-			reset_status = hclge_get_reset_status(hdev, queue_gid);
+			ret = hclge_get_reset_status(hdev, queue_gid,
+						     &reset_status);
+			if (ret)
+				return ret;
+
 			if (reset_status)
 				break;
 
-- 
2.33.0

[PATCH 5.14 069/162] net/smc: add missing error check in smc_clc_prfx_set()

[Greg Kroah-Hartman]

From: Karsten Graul <kgraul@linux.ibm.com>

[ Upstream commit 6c90731980655280ea07ce4b21eb97457bf86286 ]

Coverity stumbled over a missing error check in smc_clc_prfx_set():

*** CID 1475954:  Error handling issues  (CHECKED_RETURN)
/net/smc/smc_clc.c: 233 in smc_clc_prfx_set()
>>>     CID 1475954:  Error handling issues  (CHECKED_RETURN)
>>>     Calling "kernel_getsockname" without checking return value (as is done elsewhere 8 out of 10 times).
233     	kernel_getsockname(clcsock, (struct sockaddr *)&addrs);

Add the return code check in smc_clc_prfx_set().

Fixes: c246d942eabc ("net/smc: restructure netinfo for CLC proposal msgs")
Reported-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/smc/smc_clc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/smc/smc_clc.c b/net/smc/smc_clc.c
index e286dafd6e88..6ec1ebe878ae 100644
--- a/net/smc/smc_clc.c
+++ b/net/smc/smc_clc.c
@@ -230,7 +230,8 @@ static int smc_clc_prfx_set(struct socket *clcsock,
 		goto out_rel;
 	}
 	/* get address to which the internal TCP socket is bound */
-	kernel_getsockname(clcsock, (struct sockaddr *)&addrs);
+	if (kernel_getsockname(clcsock, (struct sockaddr *)&addrs) < 0)
+		goto out_rel;
 	/* analyze IP specific data of net_device belonging to TCP socket */
 	addr6 = (struct sockaddr_in6 *)&addrs;
 	rcu_read_lock();
-- 
2.33.0

[PATCH 5.14 070/162] net/smc: fix workqueue leaked lock in smc_conn_abort_work

[Greg Kroah-Hartman]

From: Karsten Graul <kgraul@linux.ibm.com>

[ Upstream commit a18cee4791b1123d0a6579a7c89f4b87e48abe03 ]

The abort_work is scheduled when a connection was detected to be
out-of-sync after a link failure. The work calls smc_conn_kill(),
which calls smc_close_active_abort() and that might end up calling
smc_close_cancel_work().
smc_close_cancel_work() cancels any pending close_work and tx_work but
needs to release the sock_lock before and acquires the sock_lock again
afterwards. So when the sock_lock was NOT acquired before then it may
be held after the abort_work completes. Thats why the sock_lock is
acquired before the call to smc_conn_kill() in __smc_lgr_terminate(),
but this is missing in smc_conn_abort_work().

Fix that by acquiring the sock_lock first and release it after the
call to smc_conn_kill().

Fixes: b286a0651e44 ("net/smc: handle incoming CDC validation message")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/smc/smc_core.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/smc/smc_core.c b/net/smc/smc_core.c
index c160ff50c053..116cfd6fac1f 100644
--- a/net/smc/smc_core.c
+++ b/net/smc/smc_core.c
@@ -1474,7 +1474,9 @@ static void smc_conn_abort_work(struct work_struct *work)
 						   abort_work);
 	struct smc_sock *smc = container_of(conn, struct smc_sock, conn);
 
+	lock_sock(&smc->sk);
 	smc_conn_kill(conn, true);
+	release_sock(&smc->sk);
 	sock_put(&smc->sk); /* sock_hold done by schedulers of abort_work */
 }
 
-- 
2.33.0

[PATCH 5.14 071/162] net: dsa: fix dsa_tree_setup error path

[Greg Kroah-Hartman]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit e5845aa0eadda3d8a950eb8845c1396827131f30 ]

Since the blamed commit, dsa_tree_teardown_switches() was split into two
smaller functions, dsa_tree_teardown_switches and dsa_tree_teardown_ports.

However, the error path of dsa_tree_setup stopped calling dsa_tree_teardown_ports.

Fixes: a57d8c217aad ("net: dsa: flush switchdev workqueue before tearing down CPU/DSA ports")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/dsa/dsa2.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c
index 3a8136d5915d..383fdc0565c7 100644
--- a/net/dsa/dsa2.c
+++ b/net/dsa/dsa2.c
@@ -1001,6 +1001,7 @@ static int dsa_tree_setup(struct dsa_switch_tree *dst)
 teardown_master:
 	dsa_tree_teardown_master(dst);
 teardown_switches:
+	dsa_tree_teardown_ports(dst);
 	dsa_tree_teardown_switches(dst);
 teardown_default_cpu:
 	dsa_tree_teardown_default_cpu(dst);
-- 
2.33.0

[PATCH 5.14 072/162] net: dsa: dont allocate the slave_mii_bus using devres

[Greg Kroah-Hartman]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit 5135e96a3dd2f4555ae6981c3155a62bcf3227f6 ]

The Linux device model permits both the ->shutdown and ->remove driver
methods to get called during a shutdown procedure. Example: a DSA switch
which sits on an SPI bus, and the SPI bus driver calls this on its
->shutdown method:

spi_unregister_controller
-> device_for_each_child(&ctlr->dev, NULL, __unregister);
   -> spi_unregister_device(to_spi_device(dev));
      -> device_del(&spi->dev);

So this is a simple pattern which can theoretically appear on any bus,
although the only other buses on which I've been able to find it are
I2C:

i2c_del_adapter
-> device_for_each_child(&adap->dev, NULL, __unregister_client);
   -> i2c_unregister_device(client);
      -> device_unregister(&client->dev);

The implication of this pattern is that devices on these buses can be
unregistered after having been shut down. The drivers for these devices
might choose to return early either from ->remove or ->shutdown if the
other callback has already run once, and they might choose that the
->shutdown method should only perform a subset of the teardown done by
->remove (to avoid unnecessary delays when rebooting).

So in other words, the device driver may choose on ->remove to not
do anything (therefore to not unregister an MDIO bus it has registered
on ->probe), because this ->remove is actually triggered by the
device_shutdown path, and its ->shutdown method has already run and done
the minimally required cleanup.

This used to be fine until the blamed commit, but now, the following
BUG_ON triggers:

void mdiobus_free(struct mii_bus *bus)
{
	/* For compatibility with error handling in drivers. */
	if (bus->state == MDIOBUS_ALLOCATED) {
		kfree(bus);
		return;
	}

	BUG_ON(bus->state != MDIOBUS_UNREGISTERED);
	bus->state = MDIOBUS_RELEASED;

	put_device(&bus->dev);
}

In other words, there is an attempt to free an MDIO bus which was not
unregistered. The attempt to free it comes from the devres release
callbacks of the SPI device, which are executed after the device is
unregistered.

I'm not saying that the fact that MDIO buses allocated using devres
would automatically get unregistered wasn't strange. I'm just saying
that the commit didn't care about auditing existing call paths in the
kernel, and now, the following code sequences are potentially buggy:

(a) devm_mdiobus_alloc followed by plain mdiobus_register, for a device
    located on a bus that unregisters its children on shutdown. After
    the blamed patch, either both the alloc and the register should use
    devres, or none should.

(b) devm_mdiobus_alloc followed by plain mdiobus_register, and then no
    mdiobus_unregister at all in the remove path. After the blamed
    patch, nobody unregisters the MDIO bus anymore, so this is even more
    buggy than the previous case which needs a specific bus
    configuration to be seen, this one is an unconditional bug.

In this case, DSA falls into category (a), it tries to be helpful and
registers an MDIO bus on behalf of the switch, which might be on such a
bus. I've no idea why it does it under devres.

It does this on probe:

	if (!ds->slave_mii_bus && ds->ops->phy_read)
		alloc and register mdio bus

and this on remove:

	if (ds->slave_mii_bus && ds->ops->phy_read)
		unregister mdio bus

I _could_ imagine using devres because the condition used on remove is
different than the condition used on probe. So strictly speaking, DSA
cannot determine whether the ds->slave_mii_bus it sees on remove is the
ds->slave_mii_bus that _it_ has allocated on probe. Using devres would
have solved that problem. But nonetheless, the existing code already
proceeds to unregister the MDIO bus, even though it might be
unregistering an MDIO bus it has never registered. So I can only guess
that no driver that implements ds->ops->phy_read also allocates and
registers ds->slave_mii_bus itself.

So in that case, if unregistering is fine, freeing must be fine too.

Stop using devres and free the MDIO bus manually. This will make devres
stop attempting to free a still registered MDIO bus on ->shutdown.

Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Reported-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/dsa/dsa2.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c
index 383fdc0565c7..76ed5ef0e36a 100644
--- a/net/dsa/dsa2.c
+++ b/net/dsa/dsa2.c
@@ -792,7 +792,7 @@ static int dsa_switch_setup(struct dsa_switch *ds)
 	devlink_params_publish(ds->devlink);
 
 	if (!ds->slave_mii_bus && ds->ops->phy_read) {
-		ds->slave_mii_bus = devm_mdiobus_alloc(ds->dev);
+		ds->slave_mii_bus = mdiobus_alloc();
 		if (!ds->slave_mii_bus) {
 			err = -ENOMEM;
 			goto teardown;
@@ -802,13 +802,16 @@ static int dsa_switch_setup(struct dsa_switch *ds)
 
 		err = mdiobus_register(ds->slave_mii_bus);
 		if (err < 0)
-			goto teardown;
+			goto free_slave_mii_bus;
 	}
 
 	ds->setup = true;
 
 	return 0;
 
+free_slave_mii_bus:
+	if (ds->slave_mii_bus && ds->ops->phy_read)
+		mdiobus_free(ds->slave_mii_bus);
 teardown:
 	if (ds->ops->teardown)
 		ds->ops->teardown(ds);
@@ -833,8 +836,11 @@ static void dsa_switch_teardown(struct dsa_switch *ds)
 	if (!ds->setup)
 		return;
 
-	if (ds->slave_mii_bus && ds->ops->phy_read)
+	if (ds->slave_mii_bus && ds->ops->phy_read) {
 		mdiobus_unregister(ds->slave_mii_bus);
+		mdiobus_free(ds->slave_mii_bus);
+		ds->slave_mii_bus = NULL;
+	}
 
 	dsa_switch_unregister_notifier(ds);
 
-- 
2.33.0

[PATCH 5.14 073/162] net: dsa: realtek: register the MDIO bus under devres

[Greg Kroah-Hartman]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit 74b6d7d13307b016f4b5bba8198297824c0ee6df ]

The Linux device model permits both the ->shutdown and ->remove driver
methods to get called during a shutdown procedure. Example: a DSA switch
which sits on an SPI bus, and the SPI bus driver calls this on its
->shutdown method:

spi_unregister_controller
-> device_for_each_child(&ctlr->dev, NULL, __unregister);
   -> spi_unregister_device(to_spi_device(dev));
      -> device_del(&spi->dev);

So this is a simple pattern which can theoretically appear on any bus,
although the only other buses on which I've been able to find it are
I2C:

i2c_del_adapter
-> device_for_each_child(&adap->dev, NULL, __unregister_client);
   -> i2c_unregister_device(client);
      -> device_unregister(&client->dev);

The implication of this pattern is that devices on these buses can be
unregistered after having been shut down. The drivers for these devices
might choose to return early either from ->remove or ->shutdown if the
other callback has already run once, and they might choose that the
->shutdown method should only perform a subset of the teardown done by
->remove (to avoid unnecessary delays when rebooting).

So in other words, the device driver may choose on ->remove to not
do anything (therefore to not unregister an MDIO bus it has registered
on ->probe), because this ->remove is actually triggered by the
device_shutdown path, and its ->shutdown method has already run and done
the minimally required cleanup.

This used to be fine until the blamed commit, but now, the following
BUG_ON triggers:

void mdiobus_free(struct mii_bus *bus)
{
	/* For compatibility with error handling in drivers. */
	if (bus->state == MDIOBUS_ALLOCATED) {
		kfree(bus);
		return;
	}

	BUG_ON(bus->state != MDIOBUS_UNREGISTERED);
	bus->state = MDIOBUS_RELEASED;

	put_device(&bus->dev);
}

In other words, there is an attempt to free an MDIO bus which was not
unregistered. The attempt to free it comes from the devres release
callbacks of the SPI device, which are executed after the device is
unregistered.

I'm not saying that the fact that MDIO buses allocated using devres
would automatically get unregistered wasn't strange. I'm just saying
that the commit didn't care about auditing existing call paths in the
kernel, and now, the following code sequences are potentially buggy:

(a) devm_mdiobus_alloc followed by plain mdiobus_register, for a device
    located on a bus that unregisters its children on shutdown. After
    the blamed patch, either both the alloc and the register should use
    devres, or none should.

(b) devm_mdiobus_alloc followed by plain mdiobus_register, and then no
    mdiobus_unregister at all in the remove path. After the blamed
    patch, nobody unregisters the MDIO bus anymore, so this is even more
    buggy than the previous case which needs a specific bus
    configuration to be seen, this one is an unconditional bug.

In this case, the Realtek drivers fall under category (b). To solve it,
we can register the MDIO bus under devres too, which restores the
previous behavior.

Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Reported-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Reported-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/realtek-smi-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/dsa/realtek-smi-core.c b/drivers/net/dsa/realtek-smi-core.c
index 8e49d4f85d48..6bf46d76c028 100644
--- a/drivers/net/dsa/realtek-smi-core.c
+++ b/drivers/net/dsa/realtek-smi-core.c
@@ -368,7 +368,7 @@ int realtek_smi_setup_mdio(struct realtek_smi *smi)
 	smi->slave_mii_bus->parent = smi->dev;
 	smi->ds->slave_mii_bus = smi->slave_mii_bus;
 
-	ret = of_mdiobus_register(smi->slave_mii_bus, mdio_np);
+	ret = devm_of_mdiobus_register(smi->dev, smi->slave_mii_bus, mdio_np);
 	if (ret) {
 		dev_err(smi->dev, "unable to register MDIO bus %s\n",
 			smi->slave_mii_bus->id);
-- 
2.33.0

[PATCH 5.14 074/162] platform/x86: dell: fix DELL_WMI_PRIVACY dependencies & build error

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 5b72dafaca73b33416c82457ae615e6f2022e901 ]

When DELL_WMI=y, DELL_WMI_PRIVACY=y, and LEDS_TRIGGER_AUDIO=m, there
is a linker error since the LEDS trigger code is built as a loadable
module. This happens because DELL_WMI_PRIVACY is a bool that depends
on a tristate (LEDS_TRIGGER_AUDIO=m), which can be dangerous.

ld: drivers/platform/x86/dell/dell-wmi-privacy.o: in function `dell_privacy_wmi_probe':
dell-wmi-privacy.c:(.text+0x3df): undefined reference to `ledtrig_audio_get'

Fixes: 8af9fa37b8a3 ("platform/x86: dell-privacy: Add support for Dell hardware privacy")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Perry Yuan <Perry.Yuan@dell.com>
Cc: Dell.Client.Kernel@dell.com
Cc: platform-driver-x86@vger.kernel.org
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <mgross@linux.intel.com>
Link: https://lore.kernel.org/r/20210918044829.19222-1-rdunlap@infradead.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/dell/Kconfig | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/platform/x86/dell/Kconfig b/drivers/platform/x86/dell/Kconfig
index 9e7314d90bea..1e3da9700005 100644
--- a/drivers/platform/x86/dell/Kconfig
+++ b/drivers/platform/x86/dell/Kconfig
@@ -166,8 +166,7 @@ config DELL_WMI
 
 config DELL_WMI_PRIVACY
 	bool "Dell WMI Hardware Privacy Support"
-	depends on DELL_WMI
-	depends on LEDS_TRIGGER_AUDIO
+	depends on LEDS_TRIGGER_AUDIO = y || DELL_WMI = LEDS_TRIGGER_AUDIO
 	help
 	  This option adds integration with the "Dell Hardware Privacy"
 	  feature of Dell laptops to the dell-wmi driver.
-- 
2.33.0

[PATCH 5.14 075/162] kselftest/arm64: signal: Add SVE to the set of features we can check for

[Greg Kroah-Hartman]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit d4e4dc4fab686c5f3f185272a19b83930664bef5 ]

Allow testcases for SVE signal handling to flag the dependency and be
skipped on systems without SVE support.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210819134245.13935-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/arm64/signal/test_signals.h       | 2 ++
 tools/testing/selftests/arm64/signal/test_signals_utils.c | 3 +++
 2 files changed, 5 insertions(+)

diff --git a/tools/testing/selftests/arm64/signal/test_signals.h b/tools/testing/selftests/arm64/signal/test_signals.h
index f96baf1cef1a..ebe8694dbef0 100644
--- a/tools/testing/selftests/arm64/signal/test_signals.h
+++ b/tools/testing/selftests/arm64/signal/test_signals.h
@@ -33,10 +33,12 @@
  */
 enum {
 	FSSBS_BIT,
+	FSVE_BIT,
 	FMAX_END
 };
 
 #define FEAT_SSBS		(1UL << FSSBS_BIT)
+#define FEAT_SVE		(1UL << FSVE_BIT)
 
 /*
  * A descriptor used to describe and configure a test case.
diff --git a/tools/testing/selftests/arm64/signal/test_signals_utils.c b/tools/testing/selftests/arm64/signal/test_signals_utils.c
index 2de6e5ed5e25..6836510a522f 100644
--- a/tools/testing/selftests/arm64/signal/test_signals_utils.c
+++ b/tools/testing/selftests/arm64/signal/test_signals_utils.c
@@ -26,6 +26,7 @@ static int sig_copyctx = SIGTRAP;
 
 static char const *const feats_names[FMAX_END] = {
 	" SSBS ",
+	" SVE ",
 };
 
 #define MAX_FEATS_SZ	128
@@ -263,6 +264,8 @@ int test_init(struct tdescr *td)
 		 */
 		if (getauxval(AT_HWCAP) & HWCAP_SSBS)
 			td->feats_supported |= FEAT_SSBS;
+		if (getauxval(AT_HWCAP) & HWCAP_SVE)
+			td->feats_supported |= FEAT_SVE;
 		if (feats_ok(td))
 			fprintf(stderr,
 				"Required Features: [%s] supported\n",
-- 
2.33.0

[PATCH 5.14 076/162] kselftest/arm64: signal: Skip tests if required features are missing

[Greg Kroah-Hartman]

From: Cristian Marussi <cristian.marussi@arm.com>

[ Upstream commit 0e3dbf765fe22060acbcb8eb8c4d256e655a1247 ]

During initialization of a signal testcase, features declared as required
are properly checked against the running system but no action is then taken
to effectively skip such a testcase.

Fix core signals test logic to abort initialization and report such a
testcase as skipped to the KSelfTest framework.

Fixes: f96bf4340316 ("kselftest: arm64: mangle_pstate_invalid_compat_toggle and common utils")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210920121228.35368-1-cristian.marussi@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/arm64/signal/test_signals_utils.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/tools/testing/selftests/arm64/signal/test_signals_utils.c b/tools/testing/selftests/arm64/signal/test_signals_utils.c
index 6836510a522f..22722abc9dfa 100644
--- a/tools/testing/selftests/arm64/signal/test_signals_utils.c
+++ b/tools/testing/selftests/arm64/signal/test_signals_utils.c
@@ -266,16 +266,19 @@ int test_init(struct tdescr *td)
 			td->feats_supported |= FEAT_SSBS;
 		if (getauxval(AT_HWCAP) & HWCAP_SVE)
 			td->feats_supported |= FEAT_SVE;
-		if (feats_ok(td))
+		if (feats_ok(td)) {
 			fprintf(stderr,
 				"Required Features: [%s] supported\n",
 				feats_to_string(td->feats_required &
 						td->feats_supported));
-		else
+		} else {
 			fprintf(stderr,
 				"Required Features: [%s] NOT supported\n",
 				feats_to_string(td->feats_required &
 						~td->feats_supported));
+			td->result = KSFT_SKIP;
+			return 0;
+		}
 	}
 
 	/* Perform test specific additional initialization */
-- 
2.33.0

[PATCH 5.14 077/162] spi: Revert modalias changes

[Greg Kroah-Hartman]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit 96c8395e2166efa86082f3b71567ffd84936439b ]

During the v5.13 cycle we updated the SPI subsystem to generate OF style
modaliases for SPI devices, replacing the old Linux style modalises we
used to generate based on spi_device_id which are the DT style name with
the vendor removed.  Unfortunately this means that we start only
reporting OF style modalises and not the old ones and there is nothing
that ensures that drivers list every possible OF compatible string in
their OF ID table.  The result is that there are systems which have been
relying on loading modules based on the old style that are now broken,
as found by Russell King with spi-nor on Macchiatobin.

spi-nor is a particularly problematic case for this, it only lists a
single generic DT compatible jedec,spi-nor in the driver but supports a
huge raft of device specific compatibles, with a large set of part
numbers many of which are offered by multiple vendors.  Russell's
searches of upstream device trees has turned up examples with vendor
names written in non-standard ways too.  To make matters worse up until
8ff16cf77ce3 ("Documentation: devicetree: m25p80: add "nor-jedec"
binding") the generic compatible was not part of the binding so there
are device trees out there written to that binding version which don't
list it all.  The sheer number of parts supported together with our
previous approach of ignoring the vendor ID makes robustly fixing this
by adding compatibles to the spi-nor driver seem problematic, the
current DT binding document does not list all the parts supported by the
driver at the minute (further patches will fix this).

I've also investigated supporting both formats of modalias
simultaneously but that doesn't seem possible, especially without
breaking our userspace ABI which is obviously not viable.

Instead revert the relevant changes for now:

e09f2ab8eecc ("spi: update modalias_show after of_device_uevent_modalias support")
3ce6c9e2617e ("spi: add of_device_uevent_modalias support")

This will unfortunately mean that any system which had started having
modules autoload based on the OF compatibles for drivers that list
things there but not in the spi_device_ids will now not have those
modules load which is itself a regression.  Since it affects a narrower
time window and the particularly problematic spi-nor driver may be
critical to system boot on smaller systems this seems the best of a
series of bad options.  I will start an audit of SPI drivers to identify
and fix cases where things won't autoload using spi_device_id, this is
not great but seems to be the best way forward that anyone has been able
to identify.

Thanks to Russell for both his report and the additional diagnostic and
analysis work he has done here, the detailed research above was his
work.

Fixes: e09f2ab8eecc ("spi: update modalias_show after of_device_uevent_modalias support")
Fixes: 3ce6c9e2617e ("spi: add of_device_uevent_modalias support")
Reported-by: Russell King (Oracle) <linux@armlinux.org.uk>
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Andreas Schwab <schwab@suse.de>
Cc: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index e4dc593b1f32..f95f7666cb5b 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -58,10 +58,6 @@ modalias_show(struct device *dev, struct device_attribute *a, char *buf)
 	const struct spi_device	*spi = to_spi_device(dev);
 	int len;
 
-	len = of_device_modalias(dev, buf, PAGE_SIZE);
-	if (len != -ENODEV)
-		return len;
-
 	len = acpi_device_modalias(dev, buf, PAGE_SIZE - 1);
 	if (len != -ENODEV)
 		return len;
@@ -367,10 +363,6 @@ static int spi_uevent(struct device *dev, struct kobj_uevent_env *env)
 	const struct spi_device		*spi = to_spi_device(dev);
 	int rc;
 
-	rc = of_device_uevent_modalias(dev, env);
-	if (rc != -ENODEV)
-		return rc;
-
 	rc = acpi_device_uevent_modalias(dev, env);
 	if (rc != -ENODEV)
 		return rc;
-- 
2.33.0

[PATCH 5.14 078/162] s390/qeth: fix NULL deref in qeth_clear_working_pool_list()

[Greg Kroah-Hartman]

From: Julian Wiedmann <jwi@linux.ibm.com>

[ Upstream commit 248f064af222a1f97ee02c84a98013dfbccad386 ]

When qeth_set_online() calls qeth_clear_working_pool_list() to roll
back after an error exit from qeth_hardsetup_card(), we are at risk of
accessing card->qdio.in_q before it was allocated by
qeth_alloc_qdio_queues() via qeth_mpc_initialize().

qeth_clear_working_pool_list() then dereferences NULL, and by writing to
queue->bufs[i].pool_entry scribbles all over the CPU's lowcore.
Resulting in a crash when those lowcore areas are used next (eg. on
the next machine-check interrupt).

Such a scenario would typically happen when the device is first set
online and its queues aren't allocated yet. An early IO error or certain
misconfigs (eg. mismatched transport mode, bad portno) then cause us to
error out from qeth_hardsetup_card() with card->qdio.in_q still being
NULL.

Fix it by checking the pointer for NULL before accessing it.

Note that we also have (rare) paths inside qeth_mpc_initialize() where
a configuration change can cause us to free the existing queues,
expecting that subsequent code will allocate them again. If we then
error out before that re-allocation happens, the same bug occurs.

Fixes: eff73e16ee11 ("s390/qeth: tolerate pre-filled RX buffer")
Reported-by: Stefan Raspl <raspl@linux.ibm.com>
Root-caused-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/net/qeth_core_main.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 62f88ccbd03f..51f7f4e680c3 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -207,6 +207,9 @@ static void qeth_clear_working_pool_list(struct qeth_card *card)
 				 &card->qdio.in_buf_pool.entry_list, list)
 		list_del(&pool_entry->list);
 
+	if (!queue)
+		return;
+
 	for (i = 0; i < ARRAY_SIZE(queue->bufs); i++)
 		queue->bufs[i].pool_entry = NULL;
 }
-- 
2.33.0

[PATCH 5.14 079/162] s390/qeth: fix deadlock during failing recovery

[Greg Kroah-Hartman]

From: Alexandra Winter <wintera@linux.ibm.com>

[ Upstream commit d2b59bd4b06d84a4eadb520b0f71c62fe8ec0a62 ]

Commit 0b9902c1fcc5 ("s390/qeth: fix deadlock during recovery") removed
taking discipline_mutex inside qeth_do_reset(), fixing potential
deadlocks. An error path was missed though, that still takes
discipline_mutex and thus has the original deadlock potential.

Intermittent deadlocks were seen when a qeth channel path is configured
offline, causing a race between qeth_do_reset and ccwgroup_remove.
Call qeth_set_offline() directly in the qeth_do_reset() error case and
then a new variant of ccwgroup_set_offline(), without taking
discipline_mutex.

Fixes: b41b554c1ee7 ("s390/qeth: fix locking for discipline setup / removal")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/include/asm/ccwgroup.h  |  2 +-
 drivers/s390/cio/ccwgroup.c       | 10 ++++++++--
 drivers/s390/net/qeth_core_main.c |  3 ++-
 3 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/arch/s390/include/asm/ccwgroup.h b/arch/s390/include/asm/ccwgroup.h
index 20f169b6db4e..d97301d9d0b8 100644
--- a/arch/s390/include/asm/ccwgroup.h
+++ b/arch/s390/include/asm/ccwgroup.h
@@ -57,7 +57,7 @@ struct ccwgroup_device *get_ccwgroupdev_by_busid(struct ccwgroup_driver *gdrv,
 						 char *bus_id);
 
 extern int ccwgroup_set_online(struct ccwgroup_device *gdev);
-extern int ccwgroup_set_offline(struct ccwgroup_device *gdev);
+int ccwgroup_set_offline(struct ccwgroup_device *gdev, bool call_gdrv);
 
 extern int ccwgroup_probe_ccwdev(struct ccw_device *cdev);
 extern void ccwgroup_remove_ccwdev(struct ccw_device *cdev);
diff --git a/drivers/s390/cio/ccwgroup.c b/drivers/s390/cio/ccwgroup.c
index 9748165e08e9..f19f02e75115 100644
--- a/drivers/s390/cio/ccwgroup.c
+++ b/drivers/s390/cio/ccwgroup.c
@@ -77,12 +77,13 @@ EXPORT_SYMBOL(ccwgroup_set_online);
 /**
  * ccwgroup_set_offline() - disable a ccwgroup device
  * @gdev: target ccwgroup device
+ * @call_gdrv: Call the registered gdrv set_offline function
  *
  * This function attempts to put the ccwgroup device into the offline state.
  * Returns:
  *  %0 on success and a negative error value on failure.
  */
-int ccwgroup_set_offline(struct ccwgroup_device *gdev)
+int ccwgroup_set_offline(struct ccwgroup_device *gdev, bool call_gdrv)
 {
 	struct ccwgroup_driver *gdrv = to_ccwgroupdrv(gdev->dev.driver);
 	int ret = -EINVAL;
@@ -91,11 +92,16 @@ int ccwgroup_set_offline(struct ccwgroup_device *gdev)
 		return -EAGAIN;
 	if (gdev->state == CCWGROUP_OFFLINE)
 		goto out;
+	if (!call_gdrv) {
+		ret = 0;
+		goto offline;
+	}
 	if (gdrv->set_offline)
 		ret = gdrv->set_offline(gdev);
 	if (ret)
 		goto out;
 
+offline:
 	gdev->state = CCWGROUP_OFFLINE;
 out:
 	atomic_set(&gdev->onoff, 0);
@@ -124,7 +130,7 @@ static ssize_t ccwgroup_online_store(struct device *dev,
 	if (value == 1)
 		ret = ccwgroup_set_online(gdev);
 	else if (value == 0)
-		ret = ccwgroup_set_offline(gdev);
+		ret = ccwgroup_set_offline(gdev, true);
 	else
 		ret = -EINVAL;
 out:
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 51f7f4e680c3..52dabdb32efb 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -5556,7 +5556,8 @@ static int qeth_do_reset(void *data)
 		dev_info(&card->gdev->dev,
 			 "Device successfully recovered!\n");
 	} else {
-		ccwgroup_set_offline(card->gdev);
+		qeth_set_offline(card, disc, true);
+		ccwgroup_set_offline(card->gdev, false);
 		dev_warn(&card->gdev->dev,
 			 "The qeth device driver failed to recover an error on the device\n");
 	}
-- 
2.33.0

[PATCH 5.14 080/162] gpiolib: acpi: Make set-debounce-timeout failures non fatal

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit cef0d022f55364d69017daeb9443bd31510ad6a2 ]

Commit 8dcb7a15a585 ("gpiolib: acpi: Take into account debounce settings")
made the gpiolib-acpi code call gpio_set_debounce_timeout() when requesting
GPIOs.

This in itself is fine, but it also made gpio_set_debounce_timeout()
errors fatal, causing the requesting of the GPIO to fail. This is causing
regressions. E.g. on a HP ElitePad 1000 G2 various _AEI specified GPIO
ACPI event sources specify a debouncy timeout of 20 ms, but the
pinctrl-baytrail.c only supports certain fixed values, the closest
ones being 12 or 24 ms and pinctrl-baytrail.c responds with -EINVAL
when specified a value which is not one of the fixed values.

This is causing the acpi_request_own_gpiod() call to fail for 3
ACPI event sources on the HP ElitePad 1000 G2, which in turn is causing
e.g. the battery charging vs discharging status to never get updated,
even though a charger has been plugged-in or unplugged.

Make gpio_set_debounce_timeout() errors non fatal, warning about the
failure instead, to fix this regression.

Note we should probably also fix various pinctrl drivers to just
pick the first bigger discrete value rather then returning -EINVAL but
this will need to be done on a per driver basis, where as this fix
at least gets us back to where things were before and thus restores
functionality on devices where this was lost due to
gpio_set_debounce_timeout() errors.

Fixes: 8dcb7a15a585 ("gpiolib: acpi: Take into account debounce settings")
Depends-on: 2e2b496cebef ("gpiolib: acpi: Extract acpi_request_own_gpiod() helper")
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpiolib-acpi.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index 411525ac4cc4..47712b6903b5 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -313,9 +313,11 @@ static struct gpio_desc *acpi_request_own_gpiod(struct gpio_chip *chip,
 
 	ret = gpio_set_debounce_timeout(desc, agpio->debounce_timeout);
 	if (ret)
-		gpiochip_free_own_desc(desc);
+		dev_warn(chip->parent,
+			 "Failed to set debounce-timeout for pin 0x%04X, err %d\n",
+			 pin, ret);
 
-	return ret ? ERR_PTR(ret) : desc;
+	return desc;
 }
 
 static bool acpi_gpio_in_ignore_list(const char *controller_in, int pin_in)
-- 
2.33.0

[PATCH 5.14 081/162] gpio: uniphier: Fix void functions to remove return value

[Greg Kroah-Hartman]

From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>

[ Upstream commit 2dd824cca3407bc9a2bd11b00f6e117b66fcfcf1 ]

The return type of irq_chip.irq_mask() and irq_chip.irq_unmask() should
be void.

Fixes: dbe776c2ca54 ("gpio: uniphier: add UniPhier GPIO controller driver")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-uniphier.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpio-uniphier.c b/drivers/gpio/gpio-uniphier.c
index f99f3c10bed0..39dca147d587 100644
--- a/drivers/gpio/gpio-uniphier.c
+++ b/drivers/gpio/gpio-uniphier.c
@@ -184,7 +184,7 @@ static void uniphier_gpio_irq_mask(struct irq_data *data)
 
 	uniphier_gpio_reg_update(priv, UNIPHIER_GPIO_IRQ_EN, mask, 0);
 
-	return irq_chip_mask_parent(data);
+	irq_chip_mask_parent(data);
 }
 
 static void uniphier_gpio_irq_unmask(struct irq_data *data)
@@ -194,7 +194,7 @@ static void uniphier_gpio_irq_unmask(struct irq_data *data)
 
 	uniphier_gpio_reg_update(priv, UNIPHIER_GPIO_IRQ_EN, mask, mask);
 
-	return irq_chip_unmask_parent(data);
+	irq_chip_unmask_parent(data);
 }
 
 static int uniphier_gpio_irq_set_type(struct irq_data *data, unsigned int type)
-- 
2.33.0

[PATCH 5.14 082/162] qed: rdma - dont wait for resources under hw error recovery flow

[Greg Kroah-Hartman]

From: Shai Malin <smalin@marvell.com>

[ Upstream commit 1ea7812326004afd2803cc968a4776ae5120a597 ]

If the HW device is during recovery, the HW resources will never return,
hence we shouldn't wait for the CID (HW context ID) bitmaps to clear.
This fix speeds up the error recovery flow.

Fixes: 64515dc899df ("qed: Add infrastructure for error detection and recovery")
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_iwarp.c | 8 ++++++++
 drivers/net/ethernet/qlogic/qed/qed_roce.c  | 8 ++++++++
 2 files changed, 16 insertions(+)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
index a99861124630..68fbe536a1f3 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
@@ -1297,6 +1297,14 @@ qed_iwarp_wait_cid_map_cleared(struct qed_hwfn *p_hwfn, struct qed_bmap *bmap)
 	prev_weight = weight;
 
 	while (weight) {
+		/* If the HW device is during recovery, all resources are
+		 * immediately reset without receiving a per-cid indication
+		 * from HW. In this case we don't expect the cid_map to be
+		 * cleared.
+		 */
+		if (p_hwfn->cdev->recov_in_prog)
+			return 0;
+
 		msleep(QED_IWARP_MAX_CID_CLEAN_TIME);
 
 		weight = bitmap_weight(bmap->bitmap, bmap->max_count);
diff --git a/drivers/net/ethernet/qlogic/qed/qed_roce.c b/drivers/net/ethernet/qlogic/qed/qed_roce.c
index f16a157bb95a..cf5baa5e59bc 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_roce.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_roce.c
@@ -77,6 +77,14 @@ void qed_roce_stop(struct qed_hwfn *p_hwfn)
 	 * Beyond the added delay we clear the bitmap anyway.
 	 */
 	while (bitmap_weight(rcid_map->bitmap, rcid_map->max_count)) {
+		/* If the HW device is during recovery, all resources are
+		 * immediately reset without receiving a per-cid indication
+		 * from HW. In this case we don't expect the cid bitmap to be
+		 * cleared.
+		 */
+		if (p_hwfn->cdev->recov_in_prog)
+			return;
+
 		msleep(100);
 		if (wait_count++ > 20) {
 			DP_NOTICE(p_hwfn, "cid bitmap wait timed out\n");
-- 
2.33.0

[PATCH 5.14 083/162] mptcp: ensure tx skbs always have the MPTCP ext

[Greg Kroah-Hartman]

From: Paolo Abeni <pabeni@redhat.com>

[ Upstream commit 977d293e23b48a1129830d7968605f61c4af71a0 ]

Due to signed/unsigned comparison, the expression:

	info->size_goal - skb->len > 0

evaluates to true when the size goal is smaller than the
skb size. That results in lack of tx cache refill, so that
the skb allocated by the core TCP code lacks the required
MPTCP skb extensions.

Due to the above, syzbot is able to trigger the following WARN_ON():

WARNING: CPU: 1 PID: 810 at net/mptcp/protocol.c:1366 mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366
Modules linked in:
CPU: 1 PID: 810 Comm: syz-executor.4 Not tainted 5.14.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366
Code: ff 4c 8b 74 24 50 48 8b 5c 24 58 e9 0f fb ff ff e8 13 44 8b f8 4c 89 e7 45 31 ed e8 98 57 2e fe e9 81 f4 ff ff e8 fe 43 8b f8 <0f> 0b 41 bd ea ff ff ff e9 6f f4 ff ff 4c 89 e7 e8 b9 8e d2 f8 e9
RSP: 0018:ffffc9000531f6a0 EFLAGS: 00010216
RAX: 000000000000697f RBX: 0000000000000000 RCX: ffffc90012107000
RDX: 0000000000040000 RSI: ffffffff88eac9e2 RDI: 0000000000000003
RBP: ffff888078b15780 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff88eac017 R11: 0000000000000000 R12: ffff88801de0a280
R13: 0000000000006b58 R14: ffff888066278280 R15: ffff88803c2fe9c0
FS:  00007fd9f866e700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007faebcb2f718 CR3: 00000000267cb000 CR4: 00000000001506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 __mptcp_push_pending+0x1fb/0x6b0 net/mptcp/protocol.c:1547
 mptcp_release_cb+0xfe/0x210 net/mptcp/protocol.c:3003
 release_sock+0xb4/0x1b0 net/core/sock.c:3206
 sk_stream_wait_memory+0x604/0xed0 net/core/stream.c:145
 mptcp_sendmsg+0xc39/0x1bc0 net/mptcp/protocol.c:1749
 inet6_sendmsg+0x99/0xe0 net/ipv6/af_inet6.c:643
 sock_sendmsg_nosec net/socket.c:704 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:724
 sock_write_iter+0x2a0/0x3e0 net/socket.c:1057
 call_write_iter include/linux/fs.h:2163 [inline]
 new_sync_write+0x40b/0x640 fs/read_write.c:507
 vfs_write+0x7cf/0xae0 fs/read_write.c:594
 ksys_write+0x1ee/0x250 fs/read_write.c:647
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x4665f9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fd9f866e188 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000000000056c038 RCX: 00000000004665f9
RDX: 00000000000e7b78 RSI: 0000000020000000 RDI: 0000000000000003
RBP: 00000000004bfcc4 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000056c038
R13: 0000000000a9fb1f R14: 00007fd9f866e300 R15: 0000000000022000

Fix the issue rewriting the relevant expression to avoid
sign-related problems - note: size_goal is always >= 0.

Additionally, ensure that the skb in the tx cache always carries
the relevant extension.

Reported-and-tested-by: syzbot+263a248eec3e875baa7b@syzkaller.appspotmail.com
Fixes: 1094c6fe7280 ("mptcp: fix possible divide by zero")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mptcp/protocol.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c
index acbead7cf50f..4d2abdd3cd3b 100644
--- a/net/mptcp/protocol.c
+++ b/net/mptcp/protocol.c
@@ -1291,7 +1291,7 @@ static int mptcp_sendmsg_frag(struct sock *sk, struct sock *ssk,
 			goto alloc_skb;
 		}
 
-		must_collapse = (info->size_goal - skb->len > 0) &&
+		must_collapse = (info->size_goal > skb->len) &&
 				(skb_shinfo(skb)->nr_frags < sysctl_max_skb_frags);
 		if (must_collapse) {
 			size_bias = skb->len;
@@ -1300,7 +1300,7 @@ static int mptcp_sendmsg_frag(struct sock *sk, struct sock *ssk,
 	}
 
 alloc_skb:
-	if (!must_collapse && !ssk->sk_tx_skb_cache &&
+	if (!must_collapse &&
 	    !mptcp_alloc_tx_skb(sk, ssk, info->data_lock_held))
 		return 0;
 
-- 
2.33.0

[PATCH 5.14 084/162] nexthop: Fix memory leaks in nexthop notification chain listeners

[Greg Kroah-Hartman]

From: Ido Schimmel <idosch@nvidia.com>

[ Upstream commit 3106a0847525befe3e22fc723909d1b21eb0d520 ]

syzkaller discovered memory leaks [1] that can be reduced to the
following commands:

 # ip nexthop add id 1 blackhole
 # devlink dev reload pci/0000:06:00.0

As part of the reload flow, mlxsw will unregister its netdevs and then
unregister from the nexthop notification chain. Before unregistering
from the notification chain, mlxsw will receive delete notifications for
nexthop objects using netdevs registered by mlxsw or their uppers. mlxsw
will not receive notifications for nexthops using netdevs that are not
dismantled as part of the reload flow. For example, the blackhole
nexthop above that internally uses the loopback netdev as its nexthop
device.

One way to fix this problem is to have listeners flush their nexthop
tables after unregistering from the notification chain. This is
error-prone as evident by this patch and also not symmetric with the
registration path where a listener receives a dump of all the existing
nexthops.

Therefore, fix this problem by replaying delete notifications for the
listener being unregistered. This is symmetric to the registration path
and also consistent with the netdev notification chain.

The above means that unregister_nexthop_notifier(), like
register_nexthop_notifier(), will have to take RTNL in order to iterate
over the existing nexthops and that any callers of the function cannot
hold RTNL. This is true for mlxsw and netdevsim, but not for the VXLAN
driver. To avoid a deadlock, change the latter to unregister its nexthop
listener without holding RTNL, making it symmetric to the registration
path.

[1]
unreferenced object 0xffff88806173d600 (size 512):
  comm "syz-executor.0", pid 1290, jiffies 4295583142 (age 143.507s)
  hex dump (first 32 bytes):
    41 9d 1e 60 80 88 ff ff 08 d6 73 61 80 88 ff ff  A..`......sa....
    08 d6 73 61 80 88 ff ff 01 00 00 00 00 00 00 00  ..sa............
  backtrace:
    [<ffffffff81a6b576>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
    [<ffffffff81a6b576>] slab_post_alloc_hook+0x96/0x490 mm/slab.h:522
    [<ffffffff81a716d3>] slab_alloc_node mm/slub.c:3206 [inline]
    [<ffffffff81a716d3>] slab_alloc mm/slub.c:3214 [inline]
    [<ffffffff81a716d3>] kmem_cache_alloc_trace+0x163/0x370 mm/slub.c:3231
    [<ffffffff82e8681a>] kmalloc include/linux/slab.h:591 [inline]
    [<ffffffff82e8681a>] kzalloc include/linux/slab.h:721 [inline]
    [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_group_create drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:4918 [inline]
    [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_new drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5054 [inline]
    [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_event+0x59a/0x2910 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5239
    [<ffffffff813ef67d>] notifier_call_chain+0xbd/0x210 kernel/notifier.c:83
    [<ffffffff813f0662>] blocking_notifier_call_chain kernel/notifier.c:318 [inline]
    [<ffffffff813f0662>] blocking_notifier_call_chain+0x72/0xa0 kernel/notifier.c:306
    [<ffffffff8384b9c6>] call_nexthop_notifiers+0x156/0x310 net/ipv4/nexthop.c:244
    [<ffffffff83852bd8>] insert_nexthop net/ipv4/nexthop.c:2336 [inline]
    [<ffffffff83852bd8>] nexthop_add net/ipv4/nexthop.c:2644 [inline]
    [<ffffffff83852bd8>] rtm_new_nexthop+0x14e8/0x4d10 net/ipv4/nexthop.c:2913
    [<ffffffff833e9a78>] rtnetlink_rcv_msg+0x448/0xbf0 net/core/rtnetlink.c:5572
    [<ffffffff83608703>] netlink_rcv_skb+0x173/0x480 net/netlink/af_netlink.c:2504
    [<ffffffff833de032>] rtnetlink_rcv+0x22/0x30 net/core/rtnetlink.c:5590
    [<ffffffff836069de>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
    [<ffffffff836069de>] netlink_unicast+0x5ae/0x7f0 net/netlink/af_netlink.c:1340
    [<ffffffff83607501>] netlink_sendmsg+0x8e1/0xe30 net/netlink/af_netlink.c:1929
    [<ffffffff832fde84>] sock_sendmsg_nosec net/socket.c:704 [inline]
    [<ffffffff832fde84>] sock_sendmsg net/socket.c:724 [inline]
    [<ffffffff832fde84>] ____sys_sendmsg+0x874/0x9f0 net/socket.c:2409
    [<ffffffff83304a44>] ___sys_sendmsg+0x104/0x170 net/socket.c:2463
    [<ffffffff83304c01>] __sys_sendmsg+0x111/0x1f0 net/socket.c:2492
    [<ffffffff83304d5d>] __do_sys_sendmsg net/socket.c:2501 [inline]
    [<ffffffff83304d5d>] __se_sys_sendmsg net/socket.c:2499 [inline]
    [<ffffffff83304d5d>] __x64_sys_sendmsg+0x7d/0xc0 net/socket.c:2499

Fixes: 2a014b200bbd ("mlxsw: spectrum_router: Add support for nexthop objects")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/vxlan.c |  2 +-
 net/ipv4/nexthop.c  | 19 ++++++++++++++-----
 2 files changed, 15 insertions(+), 6 deletions(-)

diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 5a8df5a195cb..141635a35c28 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -4756,12 +4756,12 @@ static void __net_exit vxlan_exit_batch_net(struct list_head *net_list)
 	LIST_HEAD(list);
 	unsigned int h;
 
-	rtnl_lock();
 	list_for_each_entry(net, net_list, exit_list) {
 		struct vxlan_net *vn = net_generic(net, vxlan_net_id);
 
 		unregister_nexthop_notifier(net, &vn->nexthop_notifier_block);
 	}
+	rtnl_lock();
 	list_for_each_entry(net, net_list, exit_list)
 		vxlan_destroy_tunnels(net, &list);
 
diff --git a/net/ipv4/nexthop.c b/net/ipv4/nexthop.c
index 0e75fd3e57b4..9e8100728d46 100644
--- a/net/ipv4/nexthop.c
+++ b/net/ipv4/nexthop.c
@@ -3567,6 +3567,7 @@ static struct notifier_block nh_netdev_notifier = {
 };
 
 static int nexthops_dump(struct net *net, struct notifier_block *nb,
+			 enum nexthop_event_type event_type,
 			 struct netlink_ext_ack *extack)
 {
 	struct rb_root *root = &net->nexthop.rb_root;
@@ -3577,8 +3578,7 @@ static int nexthops_dump(struct net *net, struct notifier_block *nb,
 		struct nexthop *nh;
 
 		nh = rb_entry(node, struct nexthop, rb_node);
-		err = call_nexthop_notifier(nb, net, NEXTHOP_EVENT_REPLACE, nh,
-					    extack);
+		err = call_nexthop_notifier(nb, net, event_type, nh, extack);
 		if (err)
 			break;
 	}
@@ -3592,7 +3592,7 @@ int register_nexthop_notifier(struct net *net, struct notifier_block *nb,
 	int err;
 
 	rtnl_lock();
-	err = nexthops_dump(net, nb, extack);
+	err = nexthops_dump(net, nb, NEXTHOP_EVENT_REPLACE, extack);
 	if (err)
 		goto unlock;
 	err = blocking_notifier_chain_register(&net->nexthop.notifier_chain,
@@ -3605,8 +3605,17 @@ EXPORT_SYMBOL(register_nexthop_notifier);
 
 int unregister_nexthop_notifier(struct net *net, struct notifier_block *nb)
 {
-	return blocking_notifier_chain_unregister(&net->nexthop.notifier_chain,
-						  nb);
+	int err;
+
+	rtnl_lock();
+	err = blocking_notifier_chain_unregister(&net->nexthop.notifier_chain,
+						 nb);
+	if (err)
+		goto unlock;
+	nexthops_dump(net, nb, NEXTHOP_EVENT_DEL, NULL);
+unlock:
+	rtnl_unlock();
+	return err;
 }
 EXPORT_SYMBOL(unregister_nexthop_notifier);
 
-- 
2.33.0

[PATCH 5.14 085/162] nfc: st-nci: Add SPI ID matching DT compatible

[Greg Kroah-Hartman]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit 31339440b2d0a4987030aac026adbaba44e22490 ]

Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding the part name used in
the compatible to the list of SPI IDs.

Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nfc/st-nci/spi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/nfc/st-nci/spi.c b/drivers/nfc/st-nci/spi.c
index 250d56f204c3..e62b1a0916d8 100644
--- a/drivers/nfc/st-nci/spi.c
+++ b/drivers/nfc/st-nci/spi.c
@@ -278,6 +278,7 @@ static int st_nci_spi_remove(struct spi_device *dev)
 
 static struct spi_device_id st_nci_spi_id_table[] = {
 	{ST_NCI_SPI_DRIVER_NAME, 0},
+	{"st21nfcb-spi", 0},
 	{}
 };
 MODULE_DEVICE_TABLE(spi, st_nci_spi_id_table);
-- 
2.33.0

[PATCH 5.14 086/162] net: ethernet: mtk_eth_soc: avoid creating duplicate offload entries

[Greg Kroah-Hartman]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit e68daf61ed13832aef8892200a874139700ca754 ]

Sometimes multiple CLS_REPLACE calls are issued for the same connection.
rhashtable_insert_fast does not check for these duplicates, so multiple
hardware flow entries can be created.
Fix this by checking for an existing entry early

Fixes: 502e84e2382d ("net: ethernet: mtk_eth_soc: add flow offloading support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mediatek/mtk_ppe_offload.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
index b5f68f66d42a..7bb1f20002b5 100644
--- a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
+++ b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
@@ -186,6 +186,9 @@ mtk_flow_offload_replace(struct mtk_eth *eth, struct flow_cls_offload *f)
 	int hash;
 	int i;
 
+	if (rhashtable_lookup(&eth->flow_table, &f->cookie, mtk_flow_ht_params))
+		return -EEXIST;
+
 	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_META)) {
 		struct flow_match_meta match;
 
-- 
2.33.0

[PATCH 5.14 087/162] net: mscc: ocelot: fix forwarding from BLOCKING ports remaining enabled

[Greg Kroah-Hartman]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit acc64f52afac15e9e44d9b5253271346841786e0 ]

The blamed commit made the fatally incorrect assumption that ports which
aren't in the FORWARDING STP state should not have packets forwarded
towards them, and that is all that needs to be done.

However, that logic alone permits BLOCKING ports to forward to
FORWARDING ports, which of course allows packet storms to occur when
there is an L2 loop.

The ocelot_get_bridge_fwd_mask should not only ask "what can the bridge
do for you", but "what can you do for the bridge". This way, only
FORWARDING ports forward to the other FORWARDING ports from the same
bridging domain, and we are still compatible with the idea of multiple
bridges.

Fixes: df291e54ccca ("net: ocelot: support multiple bridges")
Suggested-by: Colin Foster <colin.foster@in-advantage.com>
Reported-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mscc/ocelot.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index 2948d731a1c1..512dff955166 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -1260,14 +1260,19 @@ static u32 ocelot_get_bond_mask(struct ocelot *ocelot, struct net_device *bond,
 	return mask;
 }
 
-static u32 ocelot_get_bridge_fwd_mask(struct ocelot *ocelot,
+static u32 ocelot_get_bridge_fwd_mask(struct ocelot *ocelot, int src_port,
 				      struct net_device *bridge)
 {
+	struct ocelot_port *ocelot_port = ocelot->ports[src_port];
 	u32 mask = 0;
 	int port;
 
+	if (!ocelot_port || ocelot_port->bridge != bridge ||
+	    ocelot_port->stp_state != BR_STATE_FORWARDING)
+		return 0;
+
 	for (port = 0; port < ocelot->num_phys_ports; port++) {
-		struct ocelot_port *ocelot_port = ocelot->ports[port];
+		ocelot_port = ocelot->ports[port];
 
 		if (!ocelot_port)
 			continue;
@@ -1333,7 +1338,7 @@ void ocelot_apply_bridge_fwd_mask(struct ocelot *ocelot)
 			struct net_device *bridge = ocelot_port->bridge;
 			struct net_device *bond = ocelot_port->bond;
 
-			mask = ocelot_get_bridge_fwd_mask(ocelot, bridge);
+			mask = ocelot_get_bridge_fwd_mask(ocelot, port, bridge);
 			mask |= cpu_fwd_mask;
 			mask &= ~BIT(port);
 			if (bond) {
-- 
2.33.0

[PATCH 5.14 088/162] net/mlx4_en: Dont allow aRFS for encapsulated packets

[Greg Kroah-Hartman]

From: Aya Levin <ayal@nvidia.com>

[ Upstream commit fdbccea419dc782079ce5881d2705cc9e3881480 ]

Driver doesn't support aRFS for encapsulated packets, return early error
in such a case.

Fixes: 1eb8c695bda9 ("net/mlx4_en: Add accelerated RFS support")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index c3171b5f6431..a6878e5f922a 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -372,6 +372,9 @@ mlx4_en_filter_rfs(struct net_device *net_dev, const struct sk_buff *skb,
 	int nhoff = skb_network_offset(skb);
 	int ret = 0;
 
+	if (skb->encapsulation)
+		return -EPROTONOSUPPORT;
+
 	if (skb->protocol != htons(ETH_P_IP))
 		return -EPROTONOSUPPORT;
 
-- 
2.33.0

[PATCH 5.14 089/162] atlantic: Fix issue in the pm resume flow.

[Greg Kroah-Hartman]

From: Sudarsana Reddy Kalluru <skalluru@marvell.com>

[ Upstream commit 4d88c339c423eefe2fd48215016cb0c75fcb4c4d ]

After fixing hibernation resume flow, another usecase was found which
should be explicitly handled - resume when device is in "down" state.
Invoke aq_nic_init jointly with aq_nic_start only if ndev was already
up during suspend/hibernate. We still need to perform nic_deinit() if
caller requests for it, to handle the freeze/resume scenarios.

Fixes: 57f780f1c433 ("atlantic: Fix driver resume flow.")
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c b/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c
index f26d03735619..5b996330f228 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c
@@ -419,13 +419,13 @@ static int atl_resume_common(struct device *dev, bool deep)
 	if (deep) {
 		/* Reinitialize Nic/Vecs objects */
 		aq_nic_deinit(nic, !nic->aq_hw->aq_nic_cfg->wol);
+	}
 
+	if (netif_running(nic->ndev)) {
 		ret = aq_nic_init(nic);
 		if (ret)
 			goto err_exit;
-	}
 
-	if (netif_running(nic->ndev)) {
 		ret = aq_nic_start(nic);
 		if (ret)
 			goto err_exit;
-- 
2.33.0

[PATCH 5.14 090/162] drm/amdkfd: map SVM range with correct access permission

[Greg Kroah-Hartman]

From: Philip Yang <Philip.Yang@amd.com>

[ Upstream commit 2f617f4df8dfef68f175160d533f5820a368023e ]

Restore retry fault or prefetch range, or restore svm range after
eviction to map range to GPU with correct read or write access
permission.

Range may includes multiple VMAs, update GPU page table with offset of
prange, number of pages for each VMA according VMA access permission.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdkfd/kfd_svm.c | 134 +++++++++++++++++----------
 1 file changed, 86 insertions(+), 48 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_svm.c b/drivers/gpu/drm/amd/amdkfd/kfd_svm.c
index 0f7f1e5621ea..ddac10b5bd3a 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_svm.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_svm.c
@@ -120,6 +120,7 @@ static void svm_range_remove_notifier(struct svm_range *prange)
 
 static int
 svm_range_dma_map_dev(struct amdgpu_device *adev, struct svm_range *prange,
+		      unsigned long offset, unsigned long npages,
 		      unsigned long *hmm_pfns, uint32_t gpuidx)
 {
 	enum dma_data_direction dir = DMA_BIDIRECTIONAL;
@@ -136,7 +137,8 @@ svm_range_dma_map_dev(struct amdgpu_device *adev, struct svm_range *prange,
 		prange->dma_addr[gpuidx] = addr;
 	}
 
-	for (i = 0; i < prange->npages; i++) {
+	addr += offset;
+	for (i = 0; i < npages; i++) {
 		if (WARN_ONCE(addr[i] && !dma_mapping_error(dev, addr[i]),
 			      "leaking dma mapping\n"))
 			dma_unmap_page(dev, addr[i], PAGE_SIZE, dir);
@@ -167,6 +169,7 @@ svm_range_dma_map_dev(struct amdgpu_device *adev, struct svm_range *prange,
 
 static int
 svm_range_dma_map(struct svm_range *prange, unsigned long *bitmap,
+		  unsigned long offset, unsigned long npages,
 		  unsigned long *hmm_pfns)
 {
 	struct kfd_process *p;
@@ -187,7 +190,8 @@ svm_range_dma_map(struct svm_range *prange, unsigned long *bitmap,
 		}
 		adev = (struct amdgpu_device *)pdd->dev->kgd;
 
-		r = svm_range_dma_map_dev(adev, prange, hmm_pfns, gpuidx);
+		r = svm_range_dma_map_dev(adev, prange, offset, npages,
+					  hmm_pfns, gpuidx);
 		if (r)
 			break;
 	}
@@ -1088,11 +1092,6 @@ svm_range_get_pte_flags(struct amdgpu_device *adev, struct svm_range *prange,
 	pte_flags |= snoop ? AMDGPU_PTE_SNOOPED : 0;
 
 	pte_flags |= amdgpu_gem_va_map_flags(adev, mapping_flags);
-
-	pr_debug("svms 0x%p [0x%lx 0x%lx] vram %d PTE 0x%llx mapping 0x%x\n",
-		 prange->svms, prange->start, prange->last,
-		 (domain == SVM_RANGE_VRAM_DOMAIN) ? 1:0, pte_flags, mapping_flags);
-
 	return pte_flags;
 }
 
@@ -1156,7 +1155,8 @@ svm_range_unmap_from_gpus(struct svm_range *prange, unsigned long start,
 
 static int
 svm_range_map_to_gpu(struct amdgpu_device *adev, struct amdgpu_vm *vm,
-		     struct svm_range *prange, dma_addr_t *dma_addr,
+		     struct svm_range *prange, unsigned long offset,
+		     unsigned long npages, bool readonly, dma_addr_t *dma_addr,
 		     struct amdgpu_device *bo_adev, struct dma_fence **fence)
 {
 	struct amdgpu_bo_va bo_va;
@@ -1167,14 +1167,15 @@ svm_range_map_to_gpu(struct amdgpu_device *adev, struct amdgpu_vm *vm,
 	int r = 0;
 	int64_t i;
 
-	pr_debug("svms 0x%p [0x%lx 0x%lx]\n", prange->svms, prange->start,
-		 prange->last);
+	last_start = prange->start + offset;
+
+	pr_debug("svms 0x%p [0x%lx 0x%lx] readonly %d\n", prange->svms,
+		 last_start, last_start + npages - 1, readonly);
 
 	if (prange->svm_bo && prange->ttm_res)
 		bo_va.is_xgmi = amdgpu_xgmi_same_hive(adev, bo_adev);
 
-	last_start = prange->start;
-	for (i = 0; i < prange->npages; i++) {
+	for (i = offset; i < offset + npages; i++) {
 		last_domain = dma_addr[i] & SVM_RANGE_VRAM_DOMAIN;
 		dma_addr[i] &= ~SVM_RANGE_VRAM_DOMAIN;
 		if ((prange->start + i) < prange->last &&
@@ -1183,13 +1184,21 @@ svm_range_map_to_gpu(struct amdgpu_device *adev, struct amdgpu_vm *vm,
 
 		pr_debug("Mapping range [0x%lx 0x%llx] on domain: %s\n",
 			 last_start, prange->start + i, last_domain ? "GPU" : "CPU");
+
 		pte_flags = svm_range_get_pte_flags(adev, prange, last_domain);
-		r = amdgpu_vm_bo_update_mapping(adev, bo_adev, vm, false, false, NULL,
-						last_start,
+		if (readonly)
+			pte_flags &= ~AMDGPU_PTE_WRITEABLE;
+
+		pr_debug("svms 0x%p map [0x%lx 0x%llx] vram %d PTE 0x%llx\n",
+			 prange->svms, last_start, prange->start + i,
+			 (last_domain == SVM_RANGE_VRAM_DOMAIN) ? 1 : 0,
+			 pte_flags);
+
+		r = amdgpu_vm_bo_update_mapping(adev, bo_adev, vm, false, false,
+						NULL, last_start,
 						prange->start + i, pte_flags,
 						last_start - prange->start,
-						NULL,
-						dma_addr,
+						NULL, dma_addr,
 						&vm->last_update,
 						&table_freed);
 		if (r) {
@@ -1220,8 +1229,10 @@ svm_range_map_to_gpu(struct amdgpu_device *adev, struct amdgpu_vm *vm,
 	return r;
 }
 
-static int svm_range_map_to_gpus(struct svm_range *prange,
-				 unsigned long *bitmap, bool wait)
+static int
+svm_range_map_to_gpus(struct svm_range *prange, unsigned long offset,
+		      unsigned long npages, bool readonly,
+		      unsigned long *bitmap, bool wait)
 {
 	struct kfd_process_device *pdd;
 	struct amdgpu_device *bo_adev;
@@ -1257,7 +1268,8 @@ static int svm_range_map_to_gpus(struct svm_range *prange,
 		}
 
 		r = svm_range_map_to_gpu(adev, drm_priv_to_vm(pdd->drm_priv),
-					 prange, prange->dma_addr[gpuidx],
+					 prange, offset, npages, readonly,
+					 prange->dma_addr[gpuidx],
 					 bo_adev, wait ? &fence : NULL);
 		if (r)
 			break;
@@ -1390,7 +1402,7 @@ static int svm_range_validate_and_map(struct mm_struct *mm,
 				      int32_t gpuidx, bool intr, bool wait)
 {
 	struct svm_validate_context ctx;
-	struct hmm_range *hmm_range;
+	unsigned long start, end, addr;
 	struct kfd_process *p;
 	void *owner;
 	int32_t idx;
@@ -1448,40 +1460,66 @@ static int svm_range_validate_and_map(struct mm_struct *mm,
 			break;
 		}
 	}
-	r = amdgpu_hmm_range_get_pages(&prange->notifier, mm, NULL,
-				       prange->start << PAGE_SHIFT,
-				       prange->npages, &hmm_range,
-				       false, true, owner);
-	if (r) {
-		pr_debug("failed %d to get svm range pages\n", r);
-		goto unreserve_out;
-	}
 
-	r = svm_range_dma_map(prange, ctx.bitmap,
-			      hmm_range->hmm_pfns);
-	if (r) {
-		pr_debug("failed %d to dma map range\n", r);
-		goto unreserve_out;
-	}
+	start = prange->start << PAGE_SHIFT;
+	end = (prange->last + 1) << PAGE_SHIFT;
+	for (addr = start; addr < end && !r; ) {
+		struct hmm_range *hmm_range;
+		struct vm_area_struct *vma;
+		unsigned long next;
+		unsigned long offset;
+		unsigned long npages;
+		bool readonly;
 
-	prange->validated_once = true;
+		vma = find_vma(mm, addr);
+		if (!vma || addr < vma->vm_start) {
+			r = -EFAULT;
+			goto unreserve_out;
+		}
+		readonly = !(vma->vm_flags & VM_WRITE);
 
-	svm_range_lock(prange);
-	if (amdgpu_hmm_range_get_pages_done(hmm_range)) {
-		pr_debug("hmm update the range, need validate again\n");
-		r = -EAGAIN;
-		goto unlock_out;
-	}
-	if (!list_empty(&prange->child_list)) {
-		pr_debug("range split by unmap in parallel, validate again\n");
-		r = -EAGAIN;
-		goto unlock_out;
-	}
+		next = min(vma->vm_end, end);
+		npages = (next - addr) >> PAGE_SHIFT;
+		r = amdgpu_hmm_range_get_pages(&prange->notifier, mm, NULL,
+					       addr, npages, &hmm_range,
+					       readonly, true, owner);
+		if (r) {
+			pr_debug("failed %d to get svm range pages\n", r);
+			goto unreserve_out;
+		}
 
-	r = svm_range_map_to_gpus(prange, ctx.bitmap, wait);
+		offset = (addr - start) >> PAGE_SHIFT;
+		r = svm_range_dma_map(prange, ctx.bitmap, offset, npages,
+				      hmm_range->hmm_pfns);
+		if (r) {
+			pr_debug("failed %d to dma map range\n", r);
+			goto unreserve_out;
+		}
+
+		svm_range_lock(prange);
+		if (amdgpu_hmm_range_get_pages_done(hmm_range)) {
+			pr_debug("hmm update the range, need validate again\n");
+			r = -EAGAIN;
+			goto unlock_out;
+		}
+		if (!list_empty(&prange->child_list)) {
+			pr_debug("range split by unmap in parallel, validate again\n");
+			r = -EAGAIN;
+			goto unlock_out;
+		}
+
+		r = svm_range_map_to_gpus(prange, offset, npages, readonly,
+					  ctx.bitmap, wait);
 
 unlock_out:
-	svm_range_unlock(prange);
+		svm_range_unlock(prange);
+
+		addr = next;
+	}
+
+	if (addr == end)
+		prange->validated_once = true;
+
 unreserve_out:
 	svm_range_unreserve_bos(&ctx);
 
-- 
2.33.0

[PATCH 5.14 091/162] drm/amdkfd: fix dma mapping leaking warning

[Greg Kroah-Hartman]

From: Philip Yang <Philip.Yang@amd.com>

[ Upstream commit f63251184a81039ebc805306505838c2a073e51a ]

For xnack off, restore work dma unmap previous system memory page, and
dma map the updated system memory page to update GPU mapping, this is
not dma mapping leaking, remove the WARN_ONCE for dma mapping leaking.

prange->dma_addr store the VRAM page pfn after the range migrated to
VRAM, should not dma unmap VRAM page when updating GPU mapping or
remove prange. Add helper svm_is_valid_dma_mapping_addr to check VRAM
page and error cases.

Mask out SVM_RANGE_VRAM_DOMAIN flag in dma_addr before calling amdgpu vm
update to avoid BUG_ON(*addr & 0xFFFF00000000003FULL), and set it again
immediately after. This flag is used to know the type of page later to
dma unmapping system memory page.

Fixes: 1d5dbfe6c06a ("drm/amdkfd: classify and map mixed svm range pages in GPU")
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdkfd/kfd_svm.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_svm.c b/drivers/gpu/drm/amd/amdkfd/kfd_svm.c
index ddac10b5bd3a..e85035fd1ccb 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_svm.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_svm.c
@@ -118,6 +118,13 @@ static void svm_range_remove_notifier(struct svm_range *prange)
 		mmu_interval_notifier_remove(&prange->notifier);
 }
 
+static bool
+svm_is_valid_dma_mapping_addr(struct device *dev, dma_addr_t dma_addr)
+{
+	return dma_addr && !dma_mapping_error(dev, dma_addr) &&
+	       !(dma_addr & SVM_RANGE_VRAM_DOMAIN);
+}
+
 static int
 svm_range_dma_map_dev(struct amdgpu_device *adev, struct svm_range *prange,
 		      unsigned long offset, unsigned long npages,
@@ -139,8 +146,7 @@ svm_range_dma_map_dev(struct amdgpu_device *adev, struct svm_range *prange,
 
 	addr += offset;
 	for (i = 0; i < npages; i++) {
-		if (WARN_ONCE(addr[i] && !dma_mapping_error(dev, addr[i]),
-			      "leaking dma mapping\n"))
+		if (svm_is_valid_dma_mapping_addr(dev, addr[i]))
 			dma_unmap_page(dev, addr[i], PAGE_SIZE, dir);
 
 		page = hmm_pfn_to_page(hmm_pfns[i]);
@@ -209,7 +215,7 @@ void svm_range_dma_unmap(struct device *dev, dma_addr_t *dma_addr,
 		return;
 
 	for (i = offset; i < offset + npages; i++) {
-		if (!dma_addr[i] || dma_mapping_error(dev, dma_addr[i]))
+		if (!svm_is_valid_dma_mapping_addr(dev, dma_addr[i]))
 			continue;
 		pr_debug("dma unmapping 0x%llx\n", dma_addr[i] >> PAGE_SHIFT);
 		dma_unmap_page(dev, dma_addr[i], PAGE_SIZE, dir);
@@ -1165,7 +1171,7 @@ svm_range_map_to_gpu(struct amdgpu_device *adev, struct amdgpu_vm *vm,
 	unsigned long last_start;
 	int last_domain;
 	int r = 0;
-	int64_t i;
+	int64_t i, j;
 
 	last_start = prange->start + offset;
 
@@ -1201,6 +1207,10 @@ svm_range_map_to_gpu(struct amdgpu_device *adev, struct amdgpu_vm *vm,
 						NULL, dma_addr,
 						&vm->last_update,
 						&table_freed);
+
+		for (j = last_start - prange->start; j <= i; j++)
+			dma_addr[j] |= last_domain;
+
 		if (r) {
 			pr_debug("failed %d to map to gpu 0x%lx\n", r, prange->start);
 			goto out;
-- 
2.33.0

[PATCH 5.14 092/162] scsi: iscsi: Adjust iface sysfs attr detection

[Greg Kroah-Hartman]

From: Baokun Li <libaokun1@huawei.com>

[ Upstream commit 4e28550829258f7dab97383acaa477bd724c0ff4 ]

ISCSI_NET_PARAM_IFACE_ENABLE belongs to enum iscsi_net_param instead of
iscsi_iface_param so move it to ISCSI_NET_PARAM. Otherwise, when we call
into the driver, we might not match and return that we don't want attr
visible in sysfs. Found in code review.

Link: https://lore.kernel.org/r/20210901085336.2264295-1-libaokun1@huawei.com
Fixes: e746f3451ec7 ("scsi: iscsi: Fix iface sysfs attr detection")
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi_transport_iscsi.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index d8b05d8b5470..922e4c7bd88e 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -441,9 +441,7 @@ static umode_t iscsi_iface_attr_is_visible(struct kobject *kobj,
 	struct iscsi_transport *t = iface->transport;
 	int param = -1;
 
-	if (attr == &dev_attr_iface_enabled.attr)
-		param = ISCSI_NET_PARAM_IFACE_ENABLE;
-	else if (attr == &dev_attr_iface_def_taskmgmt_tmo.attr)
+	if (attr == &dev_attr_iface_def_taskmgmt_tmo.attr)
 		param = ISCSI_IFACE_PARAM_DEF_TASKMGMT_TMO;
 	else if (attr == &dev_attr_iface_header_digest.attr)
 		param = ISCSI_IFACE_PARAM_HDRDGST_EN;
@@ -483,7 +481,9 @@ static umode_t iscsi_iface_attr_is_visible(struct kobject *kobj,
 	if (param != -1)
 		return t->attr_is_visible(ISCSI_IFACE_PARAM, param);
 
-	if (attr == &dev_attr_iface_vlan_id.attr)
+	if (attr == &dev_attr_iface_enabled.attr)
+		param = ISCSI_NET_PARAM_IFACE_ENABLE;
+	else if (attr == &dev_attr_iface_vlan_id.attr)
 		param = ISCSI_NET_PARAM_VLAN_ID;
 	else if (attr == &dev_attr_iface_vlan_priority.attr)
 		param = ISCSI_NET_PARAM_VLAN_PRIORITY;
-- 
2.33.0

[PATCH 5.14 093/162] scsi: target: Fix the pgr/alua_support_store functions

[Greg Kroah-Hartman]

From: Maurizio Lombardi <mlombard@redhat.com>

[ Upstream commit ef7ae7f746e95c6fa4ec2bcfacb949c36263da78 ]

Commit 356ba2a8bc8d ("scsi: target: tcmu: Make pgr_support and alua_support
attributes writable") introduced support for changeable alua_support and
pgr_support target attributes. These can only be changed if the backstore
is user-backed, otherwise the kernel returns -EINVAL.

This triggers a warning in the targetcli/rtslib code when performing a
target restore that includes non-userbacked backstores:

  # targetctl restore
  Storage Object block/storage1: Cannot set attribute alua_support:
  [Errno 22] Invalid argument, skipped
  Storage Object block/storage1: Cannot set attribute pgr_support:
  [Errno 22] Invalid argument, skipped

Fix this warning by returning an error code only if we are really going to
flip the PGR/ALUA bit in the transport_flags field, otherwise we will do
nothing and return success.

Return ENOSYS instead of EINVAL if the pgr/alua attributes can not be
changed, this way it will be possible for userspace to understand if the
operation failed because an invalid value has been passed to strtobool() or
because the attributes are fixed.

Fixes: 356ba2a8bc8d ("scsi: target: tcmu: Make pgr_support and alua_support attributes writable")
Link: https://lore.kernel.org/r/20210906151809.52811-1-mlombard@redhat.com
Reviewed-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/target_core_configfs.c | 32 +++++++++++++++++----------
 1 file changed, 20 insertions(+), 12 deletions(-)

diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c
index 102ec644bc8a..023bd4516a68 100644
--- a/drivers/target/target_core_configfs.c
+++ b/drivers/target/target_core_configfs.c
@@ -1110,20 +1110,24 @@ static ssize_t alua_support_store(struct config_item *item,
 {
 	struct se_dev_attrib *da = to_attrib(item);
 	struct se_device *dev = da->da_dev;
-	bool flag;
+	bool flag, oldflag;
 	int ret;
 
+	ret = strtobool(page, &flag);
+	if (ret < 0)
+		return ret;
+
+	oldflag = !(dev->transport_flags & TRANSPORT_FLAG_PASSTHROUGH_ALUA);
+	if (flag == oldflag)
+		return count;
+
 	if (!(dev->transport->transport_flags_changeable &
 	      TRANSPORT_FLAG_PASSTHROUGH_ALUA)) {
 		pr_err("dev[%p]: Unable to change SE Device alua_support:"
 			" alua_support has fixed value\n", dev);
-		return -EINVAL;
+		return -ENOSYS;
 	}
 
-	ret = strtobool(page, &flag);
-	if (ret < 0)
-		return ret;
-
 	if (flag)
 		dev->transport_flags &= ~TRANSPORT_FLAG_PASSTHROUGH_ALUA;
 	else
@@ -1145,20 +1149,24 @@ static ssize_t pgr_support_store(struct config_item *item,
 {
 	struct se_dev_attrib *da = to_attrib(item);
 	struct se_device *dev = da->da_dev;
-	bool flag;
+	bool flag, oldflag;
 	int ret;
 
+	ret = strtobool(page, &flag);
+	if (ret < 0)
+		return ret;
+
+	oldflag = !(dev->transport_flags & TRANSPORT_FLAG_PASSTHROUGH_PGR);
+	if (flag == oldflag)
+		return count;
+
 	if (!(dev->transport->transport_flags_changeable &
 	      TRANSPORT_FLAG_PASSTHROUGH_PGR)) {
 		pr_err("dev[%p]: Unable to change SE Device pgr_support:"
 			" pgr_support has fixed value\n", dev);
-		return -EINVAL;
+		return -ENOSYS;
 	}
 
-	ret = strtobool(page, &flag);
-	if (ret < 0)
-		return ret;
-
 	if (flag)
 		dev->transport_flags &= ~TRANSPORT_FLAG_PASSTHROUGH_PGR;
 	else
-- 
2.33.0

[PATCH 5.14 094/162] tty: synclink_gt: rename a conflicting function name

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 06e49073dfba24df4b1073a068631b13a0039c34 ]

'set_signals()' in synclink_gt.c conflicts with an exported symbol
in arch/um/, so change set_signals() to set_gtsignals(). Keep
the function names similar by also changing get_signals() to
get_gtsignals().

../drivers/tty/synclink_gt.c:442:13: error: conflicting types for ‘set_signals’
 static void set_signals(struct slgt_info *info);
             ^~~~~~~~~~~
In file included from ../include/linux/irqflags.h:16:0,
                 from ../include/linux/spinlock.h:58,
                 from ../include/linux/mm_types.h:9,
                 from ../include/linux/buildid.h:5,
                 from ../include/linux/module.h:14,
                 from ../drivers/tty/synclink_gt.c:46:
../arch/um/include/asm/irqflags.h:6:5: note: previous declaration of ‘set_signals’ was here
 int set_signals(int enable);
     ^~~~~~~~~~~

Fixes: 705b6c7b34f2 ("[PATCH] new driver synclink_gt")
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210902003806.17054-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/synclink_gt.c | 44 +++++++++++++++++++--------------------
 1 file changed, 22 insertions(+), 22 deletions(-)

diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index 5bb928b7873e..2f5fbd7db7ca 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -438,8 +438,8 @@ static void reset_tbufs(struct slgt_info *info);
 static void tdma_reset(struct slgt_info *info);
 static bool tx_load(struct slgt_info *info, const char *buf, unsigned int count);
 
-static void get_signals(struct slgt_info *info);
-static void set_signals(struct slgt_info *info);
+static void get_gtsignals(struct slgt_info *info);
+static void set_gtsignals(struct slgt_info *info);
 static void set_rate(struct slgt_info *info, u32 data_rate);
 
 static void bh_transmit(struct slgt_info *info);
@@ -720,7 +720,7 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 	if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) {
 		info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
 		spin_lock_irqsave(&info->lock,flags);
-		set_signals(info);
+		set_gtsignals(info);
 		spin_unlock_irqrestore(&info->lock,flags);
 	}
 
@@ -730,7 +730,7 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 		if (!C_CRTSCTS(tty) || !tty_throttled(tty))
 			info->signals |= SerialSignal_RTS;
 		spin_lock_irqsave(&info->lock,flags);
-	 	set_signals(info);
+	 	set_gtsignals(info);
 		spin_unlock_irqrestore(&info->lock,flags);
 	}
 
@@ -1181,7 +1181,7 @@ static inline void line_info(struct seq_file *m, struct slgt_info *info)
 
 	/* output current serial signal states */
 	spin_lock_irqsave(&info->lock,flags);
-	get_signals(info);
+	get_gtsignals(info);
 	spin_unlock_irqrestore(&info->lock,flags);
 
 	stat_buf[0] = 0;
@@ -1281,7 +1281,7 @@ static void throttle(struct tty_struct * tty)
 	if (C_CRTSCTS(tty)) {
 		spin_lock_irqsave(&info->lock,flags);
 		info->signals &= ~SerialSignal_RTS;
-		set_signals(info);
+		set_gtsignals(info);
 		spin_unlock_irqrestore(&info->lock,flags);
 	}
 }
@@ -1306,7 +1306,7 @@ static void unthrottle(struct tty_struct * tty)
 	if (C_CRTSCTS(tty)) {
 		spin_lock_irqsave(&info->lock,flags);
 		info->signals |= SerialSignal_RTS;
-		set_signals(info);
+		set_gtsignals(info);
 		spin_unlock_irqrestore(&info->lock,flags);
 	}
 }
@@ -1477,7 +1477,7 @@ static int hdlcdev_open(struct net_device *dev)
 
 	/* inform generic HDLC layer of current DCD status */
 	spin_lock_irqsave(&info->lock, flags);
-	get_signals(info);
+	get_gtsignals(info);
 	spin_unlock_irqrestore(&info->lock, flags);
 	if (info->signals & SerialSignal_DCD)
 		netif_carrier_on(dev);
@@ -2232,7 +2232,7 @@ static void isr_txeom(struct slgt_info *info, unsigned short status)
 		if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done) {
 			info->signals &= ~SerialSignal_RTS;
 			info->drop_rts_on_tx_done = false;
-			set_signals(info);
+			set_gtsignals(info);
 		}
 
 #if SYNCLINK_GENERIC_HDLC
@@ -2397,7 +2397,7 @@ static void shutdown(struct slgt_info *info)
 
  	if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) {
 		info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
-		set_signals(info);
+		set_gtsignals(info);
 	}
 
 	flush_cond_wait(&info->gpio_wait_q);
@@ -2425,7 +2425,7 @@ static void program_hw(struct slgt_info *info)
 	else
 		async_mode(info);
 
-	set_signals(info);
+	set_gtsignals(info);
 
 	info->dcd_chkcount = 0;
 	info->cts_chkcount = 0;
@@ -2433,7 +2433,7 @@ static void program_hw(struct slgt_info *info)
 	info->dsr_chkcount = 0;
 
 	slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR | IRQ_RI);
-	get_signals(info);
+	get_gtsignals(info);
 
 	if (info->netcount ||
 	    (info->port.tty && info->port.tty->termios.c_cflag & CREAD))
@@ -2670,7 +2670,7 @@ static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr)
 	spin_lock_irqsave(&info->lock,flags);
 
 	/* return immediately if state matches requested events */
-	get_signals(info);
+	get_gtsignals(info);
 	s = info->signals;
 
 	events = mask &
@@ -3088,7 +3088,7 @@ static int tiocmget(struct tty_struct *tty)
  	unsigned long flags;
 
 	spin_lock_irqsave(&info->lock,flags);
- 	get_signals(info);
+ 	get_gtsignals(info);
 	spin_unlock_irqrestore(&info->lock,flags);
 
 	result = ((info->signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
@@ -3127,7 +3127,7 @@ static int tiocmset(struct tty_struct *tty,
 		info->signals &= ~SerialSignal_DTR;
 
 	spin_lock_irqsave(&info->lock,flags);
-	set_signals(info);
+	set_gtsignals(info);
 	spin_unlock_irqrestore(&info->lock,flags);
 	return 0;
 }
@@ -3138,7 +3138,7 @@ static int carrier_raised(struct tty_port *port)
 	struct slgt_info *info = container_of(port, struct slgt_info, port);
 
 	spin_lock_irqsave(&info->lock,flags);
-	get_signals(info);
+	get_gtsignals(info);
 	spin_unlock_irqrestore(&info->lock,flags);
 	return (info->signals & SerialSignal_DCD) ? 1 : 0;
 }
@@ -3153,7 +3153,7 @@ static void dtr_rts(struct tty_port *port, int on)
 		info->signals |= SerialSignal_RTS | SerialSignal_DTR;
 	else
 		info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
-	set_signals(info);
+	set_gtsignals(info);
 	spin_unlock_irqrestore(&info->lock,flags);
 }
 
@@ -3951,10 +3951,10 @@ static void tx_start(struct slgt_info *info)
 
 		if (info->params.mode != MGSL_MODE_ASYNC) {
 			if (info->params.flags & HDLC_FLAG_AUTO_RTS) {
-				get_signals(info);
+				get_gtsignals(info);
 				if (!(info->signals & SerialSignal_RTS)) {
 					info->signals |= SerialSignal_RTS;
-					set_signals(info);
+					set_gtsignals(info);
 					info->drop_rts_on_tx_done = true;
 				}
 			}
@@ -4008,7 +4008,7 @@ static void reset_port(struct slgt_info *info)
 	rx_stop(info);
 
 	info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
-	set_signals(info);
+	set_gtsignals(info);
 
 	slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
 }
@@ -4430,7 +4430,7 @@ static void tx_set_idle(struct slgt_info *info)
 /*
  * get state of V24 status (input) signals
  */
-static void get_signals(struct slgt_info *info)
+static void get_gtsignals(struct slgt_info *info)
 {
 	unsigned short status = rd_reg16(info, SSR);
 
@@ -4492,7 +4492,7 @@ static void msc_set_vcr(struct slgt_info *info)
 /*
  * set state of V24 control (output) signals
  */
-static void set_signals(struct slgt_info *info)
+static void set_gtsignals(struct slgt_info *info)
 {
 	unsigned char val = rd_reg8(info, VCR);
 	if (info->signals & SerialSignal_DTR)
-- 
2.33.0

[PATCH 5.14 095/162] fpga: machxo2-spi: Return an error on failure

[Greg Kroah-Hartman]

From: Tom Rix <trix@redhat.com>

[ Upstream commit 34331739e19fd6a293d488add28832ad49c9fc54 ]

Earlier successes leave 'ret' in a non error state, so these errors are
not reported. Set ret to -EINVAL before going to the error handler.

This addresses two issues reported by smatch:
drivers/fpga/machxo2-spi.c:229 machxo2_write_init()
  warn: missing error code 'ret'

drivers/fpga/machxo2-spi.c:316 machxo2_write_complete()
  warn: missing error code 'ret'

[mdf@kernel.org: Reworded commit message]
Fixes: 88fb3a002330 ("fpga: lattice machxo2: Add Lattice MachXO2 support")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/fpga/machxo2-spi.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/fpga/machxo2-spi.c b/drivers/fpga/machxo2-spi.c
index 1afb41aa20d7..b4a530a31302 100644
--- a/drivers/fpga/machxo2-spi.c
+++ b/drivers/fpga/machxo2-spi.c
@@ -225,8 +225,10 @@ static int machxo2_write_init(struct fpga_manager *mgr,
 		goto fail;
 
 	get_status(spi, &status);
-	if (test_bit(FAIL, &status))
+	if (test_bit(FAIL, &status)) {
+		ret = -EINVAL;
 		goto fail;
+	}
 	dump_status_reg(&status);
 
 	spi_message_init(&msg);
@@ -313,6 +315,7 @@ static int machxo2_write_complete(struct fpga_manager *mgr,
 	dump_status_reg(&status);
 	if (!test_bit(DONE, &status)) {
 		machxo2_cleanup(mgr);
+		ret = -EINVAL;
 		goto fail;
 	}
 
-- 
2.33.0

[PATCH 5.14 096/162] fpga: machxo2-spi: Fix missing error code in machxo2_write_complete()

[Greg Kroah-Hartman]

From: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>

[ Upstream commit a1e4470823d99e75b596748086e120dea169ed3c ]

The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'ret'.

Eliminate the follow smatch warning:

drivers/fpga/machxo2-spi.c:341 machxo2_write_complete()
  warn: missing error code 'ret'.

[mdf@kernel.org: Reworded commit message]
Fixes: 88fb3a002330 ("fpga: lattice machxo2: Add Lattice MachXO2 support")
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/fpga/machxo2-spi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/fpga/machxo2-spi.c b/drivers/fpga/machxo2-spi.c
index b4a530a31302..ea2ec3c6815c 100644
--- a/drivers/fpga/machxo2-spi.c
+++ b/drivers/fpga/machxo2-spi.c
@@ -338,6 +338,7 @@ static int machxo2_write_complete(struct fpga_manager *mgr,
 			break;
 		if (++refreshloop == MACHXO2_MAX_REFRESH_LOOP) {
 			machxo2_cleanup(mgr);
+			ret = -EINVAL;
 			goto fail;
 		}
 	} while (1);
-- 
2.33.0

[PATCH 5.14 097/162] x86/fault: Fix wrong signal when vsyscall fails with pkey

[Greg Kroah-Hartman]

From: Jiashuo Liang <liangjs@pku.edu.cn>

[ Upstream commit d4ffd5df9d18031b6a53f934388726775b4452d3 ]

The function __bad_area_nosemaphore() calls kernelmode_fixup_or_oops()
with the parameter @signal being actually @pkey, which will send a
signal numbered with the argument in @pkey.

This bug can be triggered when the kernel fails to access user-given
memory pages that are protected by a pkey, so it can go down the
do_user_addr_fault() path and pass the !user_mode() check in
__bad_area_nosemaphore().

Most cases will simply run the kernel fixup code to make an -EFAULT. But
when another condition current->thread.sig_on_uaccess_err is met, which
is only used to emulate vsyscall, the kernel will generate the wrong
signal.

Add a new parameter @pkey to kernelmode_fixup_or_oops() to fix this.

 [ bp: Massage commit message, fix build error as reported by the 0day
   bot: https://lkml.kernel.org/r/202109202245.APvuT8BX-lkp@intel.com ]

Fixes: 5042d40a264c ("x86/fault: Bypass no_context() for implicit kernel faults from usermode")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jiashuo Liang <liangjs@pku.edu.cn>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20210730030152.249106-1-liangjs@pku.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/pkeys.h |  2 --
 arch/x86/mm/fault.c          | 26 ++++++++++++++++++--------
 include/linux/pkeys.h        |  2 ++
 3 files changed, 20 insertions(+), 10 deletions(-)

diff --git a/arch/x86/include/asm/pkeys.h b/arch/x86/include/asm/pkeys.h
index 5c7bcaa79623..1d5f14aff5f6 100644
--- a/arch/x86/include/asm/pkeys.h
+++ b/arch/x86/include/asm/pkeys.h
@@ -2,8 +2,6 @@
 #ifndef _ASM_X86_PKEYS_H
 #define _ASM_X86_PKEYS_H
 
-#define ARCH_DEFAULT_PKEY	0
-
 /*
  * If more than 16 keys are ever supported, a thorough audit
  * will be necessary to ensure that the types that store key
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index b2eefdefc108..84a2c8c4af73 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -710,7 +710,8 @@ oops:
 
 static noinline void
 kernelmode_fixup_or_oops(struct pt_regs *regs, unsigned long error_code,
-			 unsigned long address, int signal, int si_code)
+			 unsigned long address, int signal, int si_code,
+			 u32 pkey)
 {
 	WARN_ON_ONCE(user_mode(regs));
 
@@ -735,8 +736,12 @@ kernelmode_fixup_or_oops(struct pt_regs *regs, unsigned long error_code,
 
 			set_signal_archinfo(address, error_code);
 
-			/* XXX: hwpoison faults will set the wrong code. */
-			force_sig_fault(signal, si_code, (void __user *)address);
+			if (si_code == SEGV_PKUERR) {
+				force_sig_pkuerr((void __user *)address, pkey);
+			} else {
+				/* XXX: hwpoison faults will set the wrong code. */
+				force_sig_fault(signal, si_code, (void __user *)address);
+			}
 		}
 
 		/*
@@ -798,7 +803,8 @@ __bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
 	struct task_struct *tsk = current;
 
 	if (!user_mode(regs)) {
-		kernelmode_fixup_or_oops(regs, error_code, address, pkey, si_code);
+		kernelmode_fixup_or_oops(regs, error_code, address,
+					 SIGSEGV, si_code, pkey);
 		return;
 	}
 
@@ -930,7 +936,8 @@ do_sigbus(struct pt_regs *regs, unsigned long error_code, unsigned long address,
 {
 	/* Kernel mode? Handle exceptions or die: */
 	if (!user_mode(regs)) {
-		kernelmode_fixup_or_oops(regs, error_code, address, SIGBUS, BUS_ADRERR);
+		kernelmode_fixup_or_oops(regs, error_code, address,
+					 SIGBUS, BUS_ADRERR, ARCH_DEFAULT_PKEY);
 		return;
 	}
 
@@ -1396,7 +1403,8 @@ good_area:
 		 */
 		if (!user_mode(regs))
 			kernelmode_fixup_or_oops(regs, error_code, address,
-						 SIGBUS, BUS_ADRERR);
+						 SIGBUS, BUS_ADRERR,
+						 ARCH_DEFAULT_PKEY);
 		return;
 	}
 
@@ -1416,7 +1424,8 @@ good_area:
 		return;
 
 	if (fatal_signal_pending(current) && !user_mode(regs)) {
-		kernelmode_fixup_or_oops(regs, error_code, address, 0, 0);
+		kernelmode_fixup_or_oops(regs, error_code, address,
+					 0, 0, ARCH_DEFAULT_PKEY);
 		return;
 	}
 
@@ -1424,7 +1433,8 @@ good_area:
 		/* Kernel mode? Handle exceptions or die: */
 		if (!user_mode(regs)) {
 			kernelmode_fixup_or_oops(regs, error_code, address,
-						 SIGSEGV, SEGV_MAPERR);
+						 SIGSEGV, SEGV_MAPERR,
+						 ARCH_DEFAULT_PKEY);
 			return;
 		}
 
diff --git a/include/linux/pkeys.h b/include/linux/pkeys.h
index 6beb26b7151d..86be8bf27b41 100644
--- a/include/linux/pkeys.h
+++ b/include/linux/pkeys.h
@@ -4,6 +4,8 @@
 
 #include <linux/mm.h>
 
+#define ARCH_DEFAULT_PKEY	0
+
 #ifdef CONFIG_ARCH_HAS_PKEYS
 #include <asm/pkeys.h>
 #else /* ! CONFIG_ARCH_HAS_PKEYS */
-- 
2.33.0

[PATCH 5.14 098/162] nvme-tcp: fix incorrect h2cdata pdu offset accounting

[Greg Kroah-Hartman]

From: Sagi Grimberg <sagi@grimberg.me>

[ Upstream commit e371af033c560b9dd1e861f8f0b503142bf0a06c ]

When the controller sends us multiple r2t PDUs in a single
request we need to account for it correctly as our send/recv
context run concurrently (i.e. we get a new r2t with r2t_offset
before we updated our iterator and req->data_sent marker). This
can cause wrong offsets to be sent to the controller.

To fix that, we will first know that this may happen only in
the send sequence of the last page, hence we will take
the r2t_offset to the h2c PDU data_offset, and in
nvme_tcp_try_send_data loop, we make sure to increment
the request markers also when we completed a PDU but
we are expecting more r2t PDUs as we still did not send
the entire data of the request.

Fixes: 825619b09ad3 ("nvme-tcp: fix possible use-after-completion")
Reported-by: Nowak, Lukasz <Lukasz.Nowak@Dell.com>
Tested-by: Nowak, Lukasz <Lukasz.Nowak@Dell.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/tcp.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c
index 19a711395cdc..fd28a23d45ed 100644
--- a/drivers/nvme/host/tcp.c
+++ b/drivers/nvme/host/tcp.c
@@ -614,7 +614,7 @@ static int nvme_tcp_setup_h2c_data_pdu(struct nvme_tcp_request *req,
 		cpu_to_le32(data->hdr.hlen + hdgst + req->pdu_len + ddgst);
 	data->ttag = pdu->ttag;
 	data->command_id = nvme_cid(rq);
-	data->data_offset = cpu_to_le32(req->data_sent);
+	data->data_offset = pdu->r2t_offset;
 	data->data_length = cpu_to_le32(req->pdu_len);
 	return 0;
 }
@@ -940,7 +940,15 @@ static int nvme_tcp_try_send_data(struct nvme_tcp_request *req)
 			nvme_tcp_ddgst_update(queue->snd_hash, page,
 					offset, ret);
 
-		/* fully successful last write*/
+		/*
+		 * update the request iterator except for the last payload send
+		 * in the request where we don't want to modify it as we may
+		 * compete with the RX path completing the request.
+		 */
+		if (req->data_sent + ret < req->data_len)
+			nvme_tcp_advance_req(req, ret);
+
+		/* fully successful last send in current PDU */
 		if (last && ret == len) {
 			if (queue->data_digest) {
 				nvme_tcp_ddgst_final(queue->snd_hash,
@@ -952,7 +960,6 @@ static int nvme_tcp_try_send_data(struct nvme_tcp_request *req)
 			}
 			return 1;
 		}
-		nvme_tcp_advance_req(req, ret);
 	}
 	return -EAGAIN;
 }
-- 
2.33.0

[PATCH 5.14 099/162] nvme: keep ctrl->namespaces ordered

[Greg Kroah-Hartman]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit 298ba0e3d4af539cc37f982d4c011a0f07fca48c ]

Various places in the nvme code that rely on ctrl->namespace to be
ordered.  Ensure that the namespae is inserted into the list at the
right position from the start instead of sorting it after the fact.

Fixes: 540c801c65eb ("NVMe: Implement namespace list scanning")
Reported-by: Anton Eidelman <anton.eidelman@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 33 +++++++++++++++++----------------
 1 file changed, 17 insertions(+), 16 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 84e7cb9f1968..e2374319df61 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -13,7 +13,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/backing-dev.h>
-#include <linux/list_sort.h>
 #include <linux/slab.h>
 #include <linux/types.h>
 #include <linux/pr.h>
@@ -3688,15 +3687,6 @@ out_unlock:
 	return ret;
 }
 
-static int ns_cmp(void *priv, const struct list_head *a,
-		const struct list_head *b)
-{
-	struct nvme_ns *nsa = container_of(a, struct nvme_ns, list);
-	struct nvme_ns *nsb = container_of(b, struct nvme_ns, list);
-
-	return nsa->head->ns_id - nsb->head->ns_id;
-}
-
 struct nvme_ns *nvme_find_get_ns(struct nvme_ctrl *ctrl, unsigned nsid)
 {
 	struct nvme_ns *ns, *ret = NULL;
@@ -3717,6 +3707,22 @@ struct nvme_ns *nvme_find_get_ns(struct nvme_ctrl *ctrl, unsigned nsid)
 }
 EXPORT_SYMBOL_NS_GPL(nvme_find_get_ns, NVME_TARGET_PASSTHRU);
 
+/*
+ * Add the namespace to the controller list while keeping the list ordered.
+ */
+static void nvme_ns_add_to_ctrl_list(struct nvme_ns *ns)
+{
+	struct nvme_ns *tmp;
+
+	list_for_each_entry_reverse(tmp, &ns->ctrl->namespaces, list) {
+		if (tmp->head->ns_id < ns->head->ns_id) {
+			list_add(&ns->list, &tmp->list);
+			return;
+		}
+	}
+	list_add(&ns->list, &ns->ctrl->namespaces);
+}
+
 static void nvme_alloc_ns(struct nvme_ctrl *ctrl, unsigned nsid,
 		struct nvme_ns_ids *ids)
 {
@@ -3778,9 +3784,8 @@ static void nvme_alloc_ns(struct nvme_ctrl *ctrl, unsigned nsid,
 	}
 
 	down_write(&ctrl->namespaces_rwsem);
-	list_add_tail(&ns->list, &ctrl->namespaces);
+	nvme_ns_add_to_ctrl_list(ns);
 	up_write(&ctrl->namespaces_rwsem);
-
 	nvme_get_ctrl(ctrl);
 
 	device_add_disk(ctrl->device, ns->disk, nvme_ns_id_attr_groups);
@@ -4059,10 +4064,6 @@ static void nvme_scan_work(struct work_struct *work)
 	if (nvme_scan_ns_list(ctrl) != 0)
 		nvme_scan_ns_sequential(ctrl);
 	mutex_unlock(&ctrl->scan_lock);
-
-	down_write(&ctrl->namespaces_rwsem);
-	list_sort(NULL, &ctrl->namespaces, ns_cmp);
-	up_write(&ctrl->namespaces_rwsem);
 }
 
 /*
-- 
2.33.0

[PATCH 5.14 100/162] thermal/core: Potential buffer overflow in thermal_build_list_of_policies()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 1bb30b20b49773369c299d4d6c65227201328663 ]

After printing the list of thermal governors, then this function prints
a newline character.  The problem is that "size" has not been updated
after printing the last governor.  This means that it can write one
character (the NUL terminator) beyond the end of the buffer.

Get rid of the "size" variable and just use "PAGE_SIZE - count" directly.

Fixes: 1b4f48494eb2 ("thermal: core: group functions related to governor handling")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210916131342.GB25094@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/thermal_core.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 97ef9b040b84..51374f4e1cca 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -222,15 +222,14 @@ int thermal_build_list_of_policies(char *buf)
 {
 	struct thermal_governor *pos;
 	ssize_t count = 0;
-	ssize_t size = PAGE_SIZE;
 
 	mutex_lock(&thermal_governor_lock);
 
 	list_for_each_entry(pos, &thermal_governor_list, governor_list) {
-		size = PAGE_SIZE - count;
-		count += scnprintf(buf + count, size, "%s ", pos->name);
+		count += scnprintf(buf + count, PAGE_SIZE - count, "%s ",
+				   pos->name);
 	}
-	count += scnprintf(buf + count, size, "\n");
+	count += scnprintf(buf + count, PAGE_SIZE - count, "\n");
 
 	mutex_unlock(&thermal_governor_lock);
 
-- 
2.33.0

[PATCH 5.14 101/162] cifs: fix a sign extension bug

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit e946d3c887a9dc33aa82a349c6284f4a084163f4 ]

The problem is the mismatched types between "ctx->total_len" which is
an unsigned int, "rc" which is an int, and "ctx->rc" which is a
ssize_t.  The code does:

	ctx->rc = (rc == 0) ? ctx->total_len : rc;

We want "ctx->rc" to store the negative "rc" error code.  But what
happens is that "rc" is type promoted to a high unsigned int and
'ctx->rc" will store the high positive value instead of a negative
value.

The fix is to change "rc" from an int to a ssize_t.

Fixes: c610c4b619e5 ("CIFS: Add asynchronous write support through kernel AIO")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/file.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 9d3bc6784771..ab2734159c19 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -3110,7 +3110,7 @@ static void collect_uncached_write_data(struct cifs_aio_ctx *ctx)
 	struct cifs_tcon *tcon;
 	struct cifs_sb_info *cifs_sb;
 	struct dentry *dentry = ctx->cfile->dentry;
-	int rc;
+	ssize_t rc;
 
 	tcon = tlink_tcon(ctx->cfile->tlink);
 	cifs_sb = CIFS_SB(dentry->d_sb);
-- 
2.33.0

[PATCH 5.14 102/162] scsi: sd_zbc: Support disks with more than 2**32 logical blocks

[Greg Kroah-Hartman]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit 1d479e6c9cb2b40abfb455863a4e9335db882e33 ]

This patch addresses the following Coverity report about the zno *
sdkp->zone_blocks expression:

CID 1475514 (#1 of 1): Unintentional integer overflow (OVERFLOW_BEFORE_WIDEN)
overflow_before_widen: Potentially overflowing expression zno *
sdkp->zone_blocks with type unsigned int (32 bits, unsigned) is evaluated
using 32-bit arithmetic, and then used in a context that expects an
expression of type sector_t (64 bits, unsigned).

Link: https://lore.kernel.org/r/20210917212314.2362324-1-bvanassche@acm.org
Fixes: 5795eb443060 ("scsi: sd_zbc: emulate ZONE_APPEND commands")
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Damien Le Moal <Damien.LeMoal@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/sd_zbc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c
index ea8b3f6ee5cd..06ee1f045e97 100644
--- a/drivers/scsi/sd_zbc.c
+++ b/drivers/scsi/sd_zbc.c
@@ -280,7 +280,7 @@ static void sd_zbc_update_wp_offset_workfn(struct work_struct *work)
 {
 	struct scsi_disk *sdkp;
 	unsigned long flags;
-	unsigned int zno;
+	sector_t zno;
 	int ret;
 
 	sdkp = container_of(work, struct scsi_disk, zone_wp_offset_work);
-- 
2.33.0

[PATCH 5.14 103/162] scsi: ufs: Revert "Utilize Transfer Request List Completion Notification Register"

[Greg Kroah-Hartman]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit 1f522c5049016cfea4f9d131ae9089e6fdba3980 ]

Using the UTRLCNR register involves two MMIO accesses in the hot path while
using the doorbell register only involves a single MMIO access. Since MMIO
accesses take time, do not use the UTRLCNR register. The spinlock
contention on the SCSI host lock that is reintroduced by this commit will
be addressed later.

This reverts commit 6f7151729647e58ac7c522081255fd0c07b38105.

Link: https://lore.kernel.org/r/20210722033439.26550-12-bvanassche@acm.org
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Tested-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 52 +++++++++++----------------------------
 drivers/scsi/ufs/ufshcd.h |  5 ----
 drivers/scsi/ufs/ufshci.h |  1 -
 3 files changed, 15 insertions(+), 43 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 15ac5fa14805..b43abba84a6f 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -2112,6 +2112,7 @@ static inline
 void ufshcd_send_command(struct ufs_hba *hba, unsigned int task_tag)
 {
 	struct ufshcd_lrb *lrbp = &hba->lrb[task_tag];
+	unsigned long flags;
 
 	lrbp->issue_time_stamp = ktime_get();
 	lrbp->compl_time_stamp = ktime_set(0, 0);
@@ -2120,19 +2121,10 @@ void ufshcd_send_command(struct ufs_hba *hba, unsigned int task_tag)
 	ufshcd_clk_scaling_start_busy(hba);
 	if (unlikely(ufshcd_should_inform_monitor(hba, lrbp)))
 		ufshcd_start_monitor(hba, lrbp);
-	if (ufshcd_has_utrlcnr(hba)) {
-		set_bit(task_tag, &hba->outstanding_reqs);
-		ufshcd_writel(hba, 1 << task_tag,
-			      REG_UTP_TRANSFER_REQ_DOOR_BELL);
-	} else {
-		unsigned long flags;
-
-		spin_lock_irqsave(hba->host->host_lock, flags);
-		set_bit(task_tag, &hba->outstanding_reqs);
-		ufshcd_writel(hba, 1 << task_tag,
-			      REG_UTP_TRANSFER_REQ_DOOR_BELL);
-		spin_unlock_irqrestore(hba->host->host_lock, flags);
-	}
+	spin_lock_irqsave(hba->host->host_lock, flags);
+	set_bit(task_tag, &hba->outstanding_reqs);
+	ufshcd_writel(hba, 1 << task_tag, REG_UTP_TRANSFER_REQ_DOOR_BELL);
+	spin_unlock_irqrestore(hba->host->host_lock, flags);
 	/* Make sure that doorbell is committed immediately */
 	wmb();
 }
@@ -5282,17 +5274,17 @@ static void __ufshcd_transfer_req_compl(struct ufs_hba *hba,
 }
 
 /**
- * ufshcd_trc_handler - handle transfer requests completion
+ * ufshcd_transfer_req_compl - handle SCSI and query command completion
  * @hba: per adapter instance
- * @use_utrlcnr: get completed requests from UTRLCNR
  *
  * Returns
  *  IRQ_HANDLED - If interrupt is valid
  *  IRQ_NONE    - If invalid interrupt
  */
-static irqreturn_t ufshcd_trc_handler(struct ufs_hba *hba, bool use_utrlcnr)
+static irqreturn_t ufshcd_transfer_req_compl(struct ufs_hba *hba)
 {
-	unsigned long completed_reqs = 0;
+	unsigned long completed_reqs, flags;
+	u32 tr_doorbell;
 
 	/* Resetting interrupt aggregation counters first and reading the
 	 * DOOR_BELL afterward allows us to handle all the completed requests.
@@ -5305,24 +5297,10 @@ static irqreturn_t ufshcd_trc_handler(struct ufs_hba *hba, bool use_utrlcnr)
 	    !(hba->quirks & UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR))
 		ufshcd_reset_intr_aggr(hba);
 
-	if (use_utrlcnr) {
-		u32 utrlcnr;
-
-		utrlcnr = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_LIST_COMPL);
-		if (utrlcnr) {
-			ufshcd_writel(hba, utrlcnr,
-				      REG_UTP_TRANSFER_REQ_LIST_COMPL);
-			completed_reqs = utrlcnr;
-		}
-	} else {
-		unsigned long flags;
-		u32 tr_doorbell;
-
-		spin_lock_irqsave(hba->host->host_lock, flags);
-		tr_doorbell = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL);
-		completed_reqs = tr_doorbell ^ hba->outstanding_reqs;
-		spin_unlock_irqrestore(hba->host->host_lock, flags);
-	}
+	spin_lock_irqsave(hba->host->host_lock, flags);
+	tr_doorbell = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL);
+	completed_reqs = tr_doorbell ^ hba->outstanding_reqs;
+	spin_unlock_irqrestore(hba->host->host_lock, flags);
 
 	if (completed_reqs) {
 		__ufshcd_transfer_req_compl(hba, completed_reqs);
@@ -5804,7 +5782,7 @@ out:
 /* Complete requests that have door-bell cleared */
 static void ufshcd_complete_requests(struct ufs_hba *hba)
 {
-	ufshcd_trc_handler(hba, false);
+	ufshcd_transfer_req_compl(hba);
 	ufshcd_tmc_handler(hba);
 }
 
@@ -6445,7 +6423,7 @@ static irqreturn_t ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status)
 		retval |= ufshcd_tmc_handler(hba);
 
 	if (intr_status & UTP_TRANSFER_REQ_COMPL)
-		retval |= ufshcd_trc_handler(hba, ufshcd_has_utrlcnr(hba));
+		retval |= ufshcd_transfer_req_compl(hba);
 
 	return retval;
 }
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 194755c9ddfe..86d4765a17b8 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -1160,11 +1160,6 @@ static inline u32 ufshcd_vops_get_ufs_hci_version(struct ufs_hba *hba)
 	return ufshcd_readl(hba, REG_UFS_VERSION);
 }
 
-static inline bool ufshcd_has_utrlcnr(struct ufs_hba *hba)
-{
-	return (hba->ufs_version >= ufshci_version(3, 0));
-}
-
 static inline int ufshcd_vops_clk_scale_notify(struct ufs_hba *hba,
 			bool up, enum ufs_notify_change_status status)
 {
diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h
index 5affb1fce5ad..de95be5d11d4 100644
--- a/drivers/scsi/ufs/ufshci.h
+++ b/drivers/scsi/ufs/ufshci.h
@@ -39,7 +39,6 @@ enum {
 	REG_UTP_TRANSFER_REQ_DOOR_BELL		= 0x58,
 	REG_UTP_TRANSFER_REQ_LIST_CLEAR		= 0x5C,
 	REG_UTP_TRANSFER_REQ_LIST_RUN_STOP	= 0x60,
-	REG_UTP_TRANSFER_REQ_LIST_COMPL		= 0x64,
 	REG_UTP_TASK_REQ_LIST_BASE_L		= 0x70,
 	REG_UTP_TASK_REQ_LIST_BASE_H		= 0x74,
 	REG_UTP_TASK_REQ_DOOR_BELL		= 0x78,
-- 
2.33.0

[PATCH 5.14 104/162] scsi: ufs: Retry aborted SCSI commands instead of completing these successfully

[Greg Kroah-Hartman]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit 73dc3c4ac703c6fea4b40e8ed1ddd80564da3dea ]

Neither SAM nor the UFS standard require that the UFS controller fills in
the completion status of commands that have been aborted (LUN RESET aborts
pending commands). Hence do not rely on the completion status provided by
the UFS controller for aborted commands but instead ask the SCSI core to
retry SCSI commands that have been aborted.

Link: https://lore.kernel.org/r/20210722033439.26550-18-bvanassche@acm.org
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 35 +++++++++++++++++++++++------------
 1 file changed, 23 insertions(+), 12 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index b43abba84a6f..a858e7d998a6 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -5229,10 +5229,12 @@ static irqreturn_t ufshcd_uic_cmd_compl(struct ufs_hba *hba, u32 intr_status)
 /**
  * __ufshcd_transfer_req_compl - handle SCSI and query command completion
  * @hba: per adapter instance
- * @completed_reqs: requests to complete
+ * @completed_reqs: bitmask that indicates which requests to complete
+ * @retry_requests: whether to ask the SCSI core to retry completed requests
  */
 static void __ufshcd_transfer_req_compl(struct ufs_hba *hba,
-					unsigned long completed_reqs)
+					unsigned long completed_reqs,
+					bool retry_requests)
 {
 	struct ufshcd_lrb *lrbp;
 	struct scsi_cmnd *cmd;
@@ -5250,7 +5252,8 @@ static void __ufshcd_transfer_req_compl(struct ufs_hba *hba,
 			if (unlikely(ufshcd_should_inform_monitor(hba, lrbp)))
 				ufshcd_update_monitor(hba, lrbp);
 			ufshcd_add_command_trace(hba, index, UFS_CMD_COMP);
-			result = ufshcd_transfer_rsp_status(hba, lrbp);
+			result = retry_requests ? DID_BUS_BUSY << 16 :
+				ufshcd_transfer_rsp_status(hba, lrbp);
 			scsi_dma_unmap(cmd);
 			cmd->result = result;
 			/* Mark completed command as NULL in LRB */
@@ -5276,12 +5279,14 @@ static void __ufshcd_transfer_req_compl(struct ufs_hba *hba,
 /**
  * ufshcd_transfer_req_compl - handle SCSI and query command completion
  * @hba: per adapter instance
+ * @retry_requests: whether or not to ask to retry requests
  *
  * Returns
  *  IRQ_HANDLED - If interrupt is valid
  *  IRQ_NONE    - If invalid interrupt
  */
-static irqreturn_t ufshcd_transfer_req_compl(struct ufs_hba *hba)
+static irqreturn_t ufshcd_transfer_req_compl(struct ufs_hba *hba,
+					     bool retry_requests)
 {
 	unsigned long completed_reqs, flags;
 	u32 tr_doorbell;
@@ -5303,7 +5308,8 @@ static irqreturn_t ufshcd_transfer_req_compl(struct ufs_hba *hba)
 	spin_unlock_irqrestore(hba->host->host_lock, flags);
 
 	if (completed_reqs) {
-		__ufshcd_transfer_req_compl(hba, completed_reqs);
+		__ufshcd_transfer_req_compl(hba, completed_reqs,
+					    retry_requests);
 		return IRQ_HANDLED;
 	} else {
 		return IRQ_NONE;
@@ -5782,7 +5788,13 @@ out:
 /* Complete requests that have door-bell cleared */
 static void ufshcd_complete_requests(struct ufs_hba *hba)
 {
-	ufshcd_transfer_req_compl(hba);
+	ufshcd_transfer_req_compl(hba, /*retry_requests=*/false);
+	ufshcd_tmc_handler(hba);
+}
+
+static void ufshcd_retry_aborted_requests(struct ufs_hba *hba)
+{
+	ufshcd_transfer_req_compl(hba, /*retry_requests=*/true);
 	ufshcd_tmc_handler(hba);
 }
 
@@ -6124,8 +6136,7 @@ static void ufshcd_err_handler(struct work_struct *work)
 	}
 
 lock_skip_pending_xfer_clear:
-	/* Complete the requests that are cleared by s/w */
-	ufshcd_complete_requests(hba);
+	ufshcd_retry_aborted_requests(hba);
 
 	spin_lock_irqsave(hba->host->host_lock, flags);
 	hba->silence_err_logs = false;
@@ -6423,7 +6434,7 @@ static irqreturn_t ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status)
 		retval |= ufshcd_tmc_handler(hba);
 
 	if (intr_status & UTP_TRANSFER_REQ_COMPL)
-		retval |= ufshcd_transfer_req_compl(hba);
+		retval |= ufshcd_transfer_req_compl(hba, /*retry_requests=*/false);
 
 	return retval;
 }
@@ -6847,7 +6858,7 @@ static int ufshcd_eh_device_reset_handler(struct scsi_cmnd *cmd)
 			err = ufshcd_clear_cmd(hba, pos);
 			if (err)
 				break;
-			__ufshcd_transfer_req_compl(hba, pos);
+			__ufshcd_transfer_req_compl(hba, pos, /*retry_requests=*/true);
 		}
 	}
 
@@ -7018,7 +7029,7 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
 		dev_err(hba->dev,
 		"%s: cmd was completed, but without a notifying intr, tag = %d",
 		__func__, tag);
-		__ufshcd_transfer_req_compl(hba, 1UL << tag);
+		__ufshcd_transfer_req_compl(hba, 1UL << tag, /*retry_requests=*/false);
 		goto release;
 	}
 
@@ -7083,7 +7094,7 @@ static int ufshcd_host_reset_and_restore(struct ufs_hba *hba)
 	 */
 	ufshcd_hba_stop(hba);
 	hba->silence_err_logs = true;
-	ufshcd_complete_requests(hba);
+	ufshcd_retry_aborted_requests(hba);
 	hba->silence_err_logs = false;
 
 	/* scale up clocks to max frequency before full reinitialization */
-- 
2.33.0

[PATCH 5.14 105/162] scsi: ufs: core: Unbreak the reset handler

[Greg Kroah-Hartman]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit d04a968c33684b15d1206e23fc1119ce0f0587fb ]

A command tag is passed as the second argument of the
__ufshcd_transfer_req_compl() call in ufshcd_eh_device_reset_handler()
instead of a bitmask. Fix this by passing a bitmask as argument instead of
a command tag.

Link: https://lore.kernel.org/r/20210916175408.2260084-1-bvanassche@acm.org
Fixes: a45f937110fa ("scsi: ufs: Optimize host lock on transfer requests send/compl paths")
Cc: Can Guo <cang@codeaurora.org>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index a858e7d998a6..3a204324151a 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -6858,7 +6858,7 @@ static int ufshcd_eh_device_reset_handler(struct scsi_cmnd *cmd)
 			err = ufshcd_clear_cmd(hba, pos);
 			if (err)
 				break;
-			__ufshcd_transfer_req_compl(hba, pos, /*retry_requests=*/true);
+			__ufshcd_transfer_req_compl(hba, 1U << pos, false);
 		}
 	}
 
-- 
2.33.0

[PATCH 5.14 106/162] scsi: qla2xxx: Restore initiator in dual mode

[Greg Kroah-Hartman]

From: Dmitry Bogdanov <d.bogdanov@yadro.com>

[ Upstream commit 5f8579038842d77e6ce05e1df6bf9dd493b0e3ef ]

In dual mode in case of disabling the target, the whole port goes offline
and initiator is turned off too.

Fix restoring initiator mode after disabling target in dual mode.

Link: https://lore.kernel.org/r/20210915153239.8035-1-d.bogdanov@yadro.com
Fixes: 0645cb8350cd ("scsi: qla2xxx: Add mode control for each physical port")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_init.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index f8f471157109..70b507d177f1 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -7014,7 +7014,8 @@ qla2x00_abort_isp(scsi_qla_host_t *vha)
 				return 0;
 			break;
 		case QLA2XXX_INI_MODE_DUAL:
-			if (!qla_dual_mode_enabled(vha))
+			if (!qla_dual_mode_enabled(vha) &&
+			    !qla_ini_mode_enabled(vha))
 				return 0;
 			break;
 		case QLA2XXX_INI_MODE_ENABLED:
-- 
2.33.0

[PATCH 5.14 107/162] scsi: lpfc: Use correct scnprintf() limit

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 6dacc371b77f473770ec646e220303a84fe96c11 ]

The limit should be "PAGE_SIZE - len" instead of "PAGE_SIZE".  We're not
going to hit the limit so this fix will not affect runtime.

Link: https://lore.kernel.org/r/20210916132331.GE25094@kili
Fixes: 5b9e70b22cc5 ("scsi: lpfc: raise sg count for nvme to use available sg resources")
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_attr.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index eb88aaaf36eb..c34a7f744601 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -6022,7 +6022,8 @@ lpfc_sg_seg_cnt_show(struct device *dev, struct device_attribute *attr,
 	len = scnprintf(buf, PAGE_SIZE, "SGL sz: %d  total SGEs: %d\n",
 		       phba->cfg_sg_dma_buf_size, phba->cfg_total_seg_cnt);
 
-	len += scnprintf(buf + len, PAGE_SIZE, "Cfg: %d  SCSI: %d  NVME: %d\n",
+	len += scnprintf(buf + len, PAGE_SIZE - len,
+			"Cfg: %d  SCSI: %d  NVME: %d\n",
 			phba->cfg_sg_seg_cnt, phba->cfg_scsi_seg_cnt,
 			phba->cfg_nvme_seg_cnt);
 	return len;
-- 
2.33.0

[PATCH 5.14 108/162] irqchip/goldfish-pic: Select GENERIC_IRQ_CHIP to fix build

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 969ac78db78c723a24e9410666b457cc1b0cb3c3 ]

irq-goldfish-pic uses GENERIC_IRQ_CHIP interfaces so select that symbol
to fix build errors.

Fixes these build errors:

mips-linux-ld: drivers/irqchip/irq-goldfish-pic.o: in function `goldfish_pic_of_init':
irq-goldfish-pic.c:(.init.text+0xc0): undefined reference to `irq_alloc_generic_chip'
mips-linux-ld: irq-goldfish-pic.c:(.init.text+0xf4): undefined reference to `irq_gc_unmask_enable_reg'
mips-linux-ld: irq-goldfish-pic.c:(.init.text+0xf8): undefined reference to `irq_gc_unmask_enable_reg'
mips-linux-ld: irq-goldfish-pic.c:(.init.text+0x100): undefined reference to `irq_gc_mask_disable_reg'
mips-linux-ld: irq-goldfish-pic.c:(.init.text+0x104): undefined reference to `irq_gc_mask_disable_reg'
mips-linux-ld: irq-goldfish-pic.c:(.init.text+0x11c): undefined reference to `irq_setup_generic_chip'
mips-linux-ld: irq-goldfish-pic.c:(.init.text+0x168): undefined reference to `irq_remove_generic_chip'

Fixes: 4235ff50cf98 ("irqchip/irq-goldfish-pic: Add Goldfish PIC driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Miodrag Dinic <miodrag.dinic@mips.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Goran Ferenc <goran.ferenc@mips.com>
Cc: Aleksandar Markovic <aleksandar.markovic@mips.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210905162519.21507-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 4d5924e9f766..aca7b595c4c7 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -409,6 +409,7 @@ config MESON_IRQ_GPIO
 config GOLDFISH_PIC
        bool "Goldfish programmable interrupt controller"
        depends on MIPS && (GOLDFISH || COMPILE_TEST)
+       select GENERIC_IRQ_CHIP
        select IRQ_DOMAIN
        help
          Say yes here to enable Goldfish interrupt controller driver used
-- 
2.33.0

[PATCH 5.14 109/162] irqchip/gic-v3-its: Fix potential VPE leak on error

[Greg Kroah-Hartman]

From: Kaige Fu <kaige.fu@linux.alibaba.com>

[ Upstream commit 280bef512933b2dda01d681d8cbe499b98fc5bdd ]

In its_vpe_irq_domain_alloc, when its_vpe_init() returns an error,
there is an off-by-one in the number of VPEs to be freed.

Fix it by simply passing the number of VPEs allocated, which is the
index of the loop iterating over the VPEs.

Fixes: 7d75bbb4bc1a ("irqchip/gic-v3-its: Add VPE irq domain allocation/teardown")
Signed-off-by: Kaige Fu <kaige.fu@linux.alibaba.com>
[maz: fixed commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/d9e36dee512e63670287ed9eff884a5d8d6d27f2.1631672311.git.kaige.fu@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-gic-v3-its.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index ba39668c3e08..51584f4cccf4 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -4501,7 +4501,7 @@ static int its_vpe_irq_domain_alloc(struct irq_domain *domain, unsigned int virq
 
 	if (err) {
 		if (i > 0)
-			its_vpe_irq_domain_free(domain, virq, i - 1);
+			its_vpe_irq_domain_free(domain, virq, i);
 
 		its_lpi_free(bitmap, base, nr_ids);
 		its_free_prop_table(vprop_page);
-- 
2.33.0

[PATCH 5.14 110/162] md: fix a lock order reversal in md_alloc

[Greg Kroah-Hartman]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit 7df835a32a8bedf7ce88efcfa7c9b245b52ff139 ]

Commit b0140891a8cea3 ("md: Fix race when creating a new md device.")
not only moved assigning mddev->gendisk before calling add_disk, which
fixes the races described in the commit log, but also added a
mddev->open_mutex critical section over add_disk and creation of the
md kobj.  Adding a kobject after add_disk is racy vs deleting the gendisk
right after adding it, but md already prevents against that by holding
a mddev->active reference.

On the other hand taking this lock added a lock order reversal with what
is not disk->open_mutex (used to be bdev->bd_mutex when the commit was
added) for partition devices, which need that lock for the internal open
for the partition scan, and a recent commit also takes it for
non-partitioned devices, leading to further lockdep splatter.

Fixes: b0140891a8ce ("md: Fix race when creating a new md device.")
Fixes: d62633873590 ("block: support delayed holder registration")
Reported-by: syzbot+fadc0aaf497e6a493b9f@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: syzbot+fadc0aaf497e6a493b9f@syzkaller.appspotmail.com
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/md.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index ae8fe54ea358..6c0c3d0d905a 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -5700,10 +5700,6 @@ static int md_alloc(dev_t dev, char *name)
 	disk->flags |= GENHD_FL_EXT_DEVT;
 	disk->events |= DISK_EVENT_MEDIA_CHANGE;
 	mddev->gendisk = disk;
-	/* As soon as we call add_disk(), another thread could get
-	 * through to md_open, so make sure it doesn't get too far
-	 */
-	mutex_lock(&mddev->open_mutex);
 	add_disk(disk);
 
 	error = kobject_add(&mddev->kobj, &disk_to_dev(disk)->kobj, "%s", "md");
@@ -5718,7 +5714,6 @@ static int md_alloc(dev_t dev, char *name)
 	if (mddev->kobj.sd &&
 	    sysfs_create_group(&mddev->kobj, &md_bitmap_group))
 		pr_debug("pointless warning\n");
-	mutex_unlock(&mddev->open_mutex);
  abort:
 	mutex_unlock(&disks_mutex);
 	if (!error && mddev->kobj.sd) {
-- 
2.33.0

[PATCH 5.14 111/162] x86/asm: Fix SETZ size enqcmds() build failure

[Greg Kroah-Hartman]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit d81ff5fe14a950f53e2833cfa196e7bb3fd5d4e3 ]

When building under GCC 4.9 and 5.5:

  arch/x86/include/asm/special_insns.h: Assembler messages:
  arch/x86/include/asm/special_insns.h:286: Error: operand size mismatch for `setz'

Change the type to "bool" for condition code arguments, as documented.

Fixes: 7f5933f81bd8 ("x86/asm: Add an enqcmds() wrapper for the ENQCMDS instruction")
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210910223332.3224851-1-keescook@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/special_insns.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/include/asm/special_insns.h b/arch/x86/include/asm/special_insns.h
index f3fbb84ff8a7..68c257a3de0d 100644
--- a/arch/x86/include/asm/special_insns.h
+++ b/arch/x86/include/asm/special_insns.h
@@ -275,7 +275,7 @@ static inline int enqcmds(void __iomem *dst, const void *src)
 {
 	const struct { char _[64]; } *__src = src;
 	struct { char _[64]; } __iomem *__dst = dst;
-	int zf;
+	bool zf;
 
 	/*
 	 * ENQCMDS %(rdx), rax
-- 
2.33.0

[PATCH 5.14 112/162] io_uring: fix race between poll completion and cancel_hash insertion

[Greg Kroah-Hartman]

From: Hao Xu <haoxu@linux.alibaba.com>

[ Upstream commit bd99c71bd14072ce2920f6d0c2fe43df072c653c ]

If poll arming and poll completion runs in parallel, there maybe races.
For instance, run io_poll_add in iowq and io_poll_task_func in original
context, then:

  iowq                                      original context
  io_poll_add
    vfs_poll
     (interruption happens
      tw queued to original
      context)                              io_poll_task_func
                                              generate cqe
                                              del from cancel_hash[]
    if !poll.done
      insert to cancel_hash[]

The entry left in cancel_hash[], similar case for fast poll.
Fix it by set poll.done = true when del from cancel_hash[].

Fixes: 5082620fb2ca ("io_uring: terminate multishot poll for CQ ring overflow")
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20210922101238.7177-2-haoxu@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/io_uring.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/io_uring.c b/fs/io_uring.c
index 754d59f734d8..27a1c813f1e1 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -4968,10 +4968,8 @@ static bool io_poll_complete(struct io_kiocb *req, __poll_t mask)
 	}
 	if (req->poll.events & EPOLLONESHOT)
 		flags = 0;
-	if (!io_cqring_fill_event(ctx, req->user_data, error, flags)) {
-		req->poll.done = true;
+	if (!io_cqring_fill_event(ctx, req->user_data, error, flags))
 		flags = 0;
-	}
 	if (flags & IORING_CQE_F_MORE)
 		ctx->cq_extra++;
 
@@ -4993,6 +4991,7 @@ static void io_poll_task_func(struct io_kiocb *req)
 		if (done) {
 			io_poll_remove_double(req);
 			hash_del(&req->hash_node);
+			req->poll.done = true;
 		} else {
 			req->result = 0;
 			add_wait_queue(req->poll.head, &req->poll.wait);
@@ -5126,6 +5125,7 @@ static void io_async_task_func(struct io_kiocb *req)
 
 	hash_del(&req->hash_node);
 	io_poll_remove_double(req);
+	apoll->poll.done = true;
 	spin_unlock_irq(&ctx->completion_lock);
 
 	if (!READ_ONCE(apoll->poll.canceled))
-- 
2.33.0

[PATCH 5.14 113/162] io_uring: fix missing set of EPOLLONESHOT for CQ ring overflow

[Greg Kroah-Hartman]

From: Hao Xu <haoxu@linux.alibaba.com>

[ Upstream commit a62682f92eedb41c1cd8290fa875a4b85624fb9a ]

We should set EPOLLONESHOT if cqring_fill_event() returns false since
io_poll_add() decides to put req or not by it.

Fixes: 5082620fb2ca ("io_uring: terminate multishot poll for CQ ring overflow")
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20210922101238.7177-3-haoxu@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/io_uring.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/fs/io_uring.c b/fs/io_uring.c
index 27a1c813f1e1..739e58ccc982 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -4968,8 +4968,10 @@ static bool io_poll_complete(struct io_kiocb *req, __poll_t mask)
 	}
 	if (req->poll.events & EPOLLONESHOT)
 		flags = 0;
-	if (!io_cqring_fill_event(ctx, req->user_data, error, flags))
+	if (!io_cqring_fill_event(ctx, req->user_data, error, flags)) {
+		req->poll.events |= EPOLLONESHOT;
 		flags = 0;
+	}
 	if (flags & IORING_CQE_F_MORE)
 		ctx->cq_extra++;
 
-- 
2.33.0

[PATCH 5.14 114/162] io_uring: put provided buffer meta data under memcg accounting

[Greg Kroah-Hartman]

From: Jens Axboe <axboe@kernel.dk>

[ Upstream commit 9990da93d2bf9892c2c14c958bef050d4e461a1a ]

For each provided buffer, we allocate a struct io_buffer to hold the
data associated with it. As a large number of buffers can be provided,
account that data with memcg.

Fixes: ddf0322db79c ("io_uring: add IORING_OP_PROVIDE_BUFFERS")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/io_uring.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/io_uring.c b/fs/io_uring.c
index 739e58ccc982..187eb1907bde 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -4043,7 +4043,7 @@ static int io_add_buffers(struct io_provide_buf *pbuf, struct io_buffer **head)
 	int i, bid = pbuf->bid;
 
 	for (i = 0; i < pbuf->nbufs; i++) {
-		buf = kmalloc(sizeof(*buf), GFP_KERNEL);
+		buf = kmalloc(sizeof(*buf), GFP_KERNEL_ACCOUNT);
 		if (!buf)
 			break;
 
-- 
2.33.0

[PATCH 5.14 115/162] io_uring: dont punt files update to io-wq unconditionally

[Greg Kroah-Hartman]

From: Jens Axboe <axboe@kernel.dk>

[ Upstream commit cdb31c29d397a8076d81fd1458d091c647ef94ba ]

There's no reason to punt it unconditionally, we just need to ensure that
the submit lock grabbing is conditional.

Fixes: 05f3fb3c5397 ("io_uring: avoid ring quiesce for fixed file set unregister and update")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/io_uring.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/fs/io_uring.c b/fs/io_uring.c
index 187eb1907bde..699a08d724c2 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -5919,19 +5919,16 @@ static int io_files_update(struct io_kiocb *req, unsigned int issue_flags)
 	struct io_uring_rsrc_update2 up;
 	int ret;
 
-	if (issue_flags & IO_URING_F_NONBLOCK)
-		return -EAGAIN;
-
 	up.offset = req->rsrc_update.offset;
 	up.data = req->rsrc_update.arg;
 	up.nr = 0;
 	up.tags = 0;
 	up.resv = 0;
 
-	mutex_lock(&ctx->uring_lock);
+	io_ring_submit_lock(ctx, !(issue_flags & IO_URING_F_NONBLOCK));
 	ret = __io_register_rsrc_update(ctx, IORING_RSRC_FILE,
 					&up, req->rsrc_update.nr_args);
-	mutex_unlock(&ctx->uring_lock);
+	io_ring_submit_unlock(ctx, !(issue_flags & IO_URING_F_NONBLOCK));
 
 	if (ret < 0)
 		req_set_fail(req);
-- 
2.33.0

[PATCH 5.14 116/162] blktrace: Fix uaf in blk_trace access after removing by sysfs

[Greg Kroah-Hartman]

From: Zhihao Cheng <chengzhihao1@huawei.com>

[ Upstream commit 5afedf670caf30a2b5a52da96eb7eac7dee6a9c9 ]

There is an use-after-free problem triggered by following process:

      P1(sda)				P2(sdb)
			echo 0 > /sys/block/sdb/trace/enable
			  blk_trace_remove_queue
			    synchronize_rcu
			    blk_trace_free
			      relay_close
rcu_read_lock
__blk_add_trace
  trace_note_tsk
  (Iterate running_trace_list)
			        relay_close_buf
				  relay_destroy_buf
				    kfree(buf)
    trace_note(sdb's bt)
      relay_reserve
        buf->offset <- nullptr deference (use-after-free) !!!
rcu_read_unlock

[  502.714379] BUG: kernel NULL pointer dereference, address:
0000000000000010
[  502.715260] #PF: supervisor read access in kernel mode
[  502.715903] #PF: error_code(0x0000) - not-present page
[  502.716546] PGD 103984067 P4D 103984067 PUD 17592b067 PMD 0
[  502.717252] Oops: 0000 [#1] SMP
[  502.720308] RIP: 0010:trace_note.isra.0+0x86/0x360
[  502.732872] Call Trace:
[  502.733193]  __blk_add_trace.cold+0x137/0x1a3
[  502.733734]  blk_add_trace_rq+0x7b/0xd0
[  502.734207]  blk_add_trace_rq_issue+0x54/0xa0
[  502.734755]  blk_mq_start_request+0xde/0x1b0
[  502.735287]  scsi_queue_rq+0x528/0x1140
...
[  502.742704]  sg_new_write.isra.0+0x16e/0x3e0
[  502.747501]  sg_ioctl+0x466/0x1100

Reproduce method:
  ioctl(/dev/sda, BLKTRACESETUP, blk_user_trace_setup[buf_size=127])
  ioctl(/dev/sda, BLKTRACESTART)
  ioctl(/dev/sdb, BLKTRACESETUP, blk_user_trace_setup[buf_size=127])
  ioctl(/dev/sdb, BLKTRACESTART)

  echo 0 > /sys/block/sdb/trace/enable &
  // Add delay(mdelay/msleep) before kernel enters blk_trace_free()

  ioctl$SG_IO(/dev/sda, SG_IO, ...)
  // Enters trace_note_tsk() after blk_trace_free() returned
  // Use mdelay in rcu region rather than msleep(which may schedule out)

Remove blk_trace from running_list before calling blk_trace_free() by
sysfs if blk_trace is at Blktrace_running state.

Fixes: c71a896154119f ("blktrace: add ftrace plugin")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Link: https://lore.kernel.org/r/20210923134921.109194-1-chengzhihao1@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/blktrace.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index c221e4c3f625..fa91f398f28b 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -1605,6 +1605,14 @@ static int blk_trace_remove_queue(struct request_queue *q)
 	if (bt == NULL)
 		return -EINVAL;
 
+	if (bt->trace_state == Blktrace_running) {
+		bt->trace_state = Blktrace_stopped;
+		spin_lock_irq(&running_trace_lock);
+		list_del_init(&bt->running_list);
+		spin_unlock_irq(&running_trace_lock);
+		relay_flush(bt->rchan);
+	}
+
 	put_probe_ref();
 	synchronize_rcu();
 	blk_trace_free(bt);
-- 
2.33.0

[PATCH 5.14 117/162] net: phylink: Update SFP selected interface on advertising changes

[Greg Kroah-Hartman]

From: Nathan Rossi <nathan.rossi@digi.com>

[ Upstream commit ea269a6f720782ed94171fb962b14ce07c372138 ]

Currently changes to the advertising state via ethtool do not cause any
reselection of the configured interface mode after the SFP is already
inserted and initially configured.

While it is not typical to change the advertised link modes for an
interface using an SFP in certain use cases it is desirable. In the case
of a SFP port that is capable of handling both SFP and SFP+ modules it
will automatically select between 1G and 10G modes depending on the
supported mode of the SFP. However if the SFP module is capable of
working in multiple modes (e.g. a SFP+ DAC that can operate at 1G or
10G), one end of the cable may be attached to a SFP 1000base-x port thus
the SFP+ end must be manually configured to the 1000base-x mode in order
for the link to be established.

This change causes the ethtool setting of advertised mode changes to
reselect the interface mode so that the link can be established.
Additionally when a module is inserted the advertising mode is reset to
match the supported modes of the module.

Signed-off-by: Nathan Rossi <nathan.rossi@digi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/phylink.c | 30 +++++++++++++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 42e5a681183f..0d3d9c3ee83c 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1604,6 +1604,32 @@ int phylink_ethtool_ksettings_set(struct phylink *pl,
 	if (config.an_enabled && phylink_is_empty_linkmode(config.advertising))
 		return -EINVAL;
 
+	/* If this link is with an SFP, ensure that changes to advertised modes
+	 * also cause the associated interface to be selected such that the
+	 * link can be configured correctly.
+	 */
+	if (pl->sfp_port && pl->sfp_bus) {
+		config.interface = sfp_select_interface(pl->sfp_bus,
+							config.advertising);
+		if (config.interface == PHY_INTERFACE_MODE_NA) {
+			phylink_err(pl,
+				    "selection of interface failed, advertisement %*pb\n",
+				    __ETHTOOL_LINK_MODE_MASK_NBITS,
+				    config.advertising);
+			return -EINVAL;
+		}
+
+		/* Revalidate with the selected interface */
+		linkmode_copy(support, pl->supported);
+		if (phylink_validate(pl, support, &config)) {
+			phylink_err(pl, "validation of %s/%s with support %*pb failed\n",
+				    phylink_an_mode_str(pl->cur_link_an_mode),
+				    phy_modes(config.interface),
+				    __ETHTOOL_LINK_MODE_MASK_NBITS, support);
+			return -EINVAL;
+		}
+	}
+
 	mutex_lock(&pl->state_mutex);
 	pl->link_config.speed = config.speed;
 	pl->link_config.duplex = config.duplex;
@@ -2183,7 +2209,9 @@ static int phylink_sfp_config(struct phylink *pl, u8 mode,
 	if (phy_interface_mode_is_8023z(iface) && pl->phydev)
 		return -EINVAL;
 
-	changed = !linkmode_equal(pl->supported, support);
+	changed = !linkmode_equal(pl->supported, support) ||
+		  !linkmode_equal(pl->link_config.advertising,
+				  config.advertising);
 	if (changed) {
 		linkmode_copy(pl->supported, support);
 		linkmode_copy(pl->link_config.advertising, config.advertising);
-- 
2.33.0

[PATCH 5.14 118/162] net: macb: fix use after free on rmmod

[Greg Kroah-Hartman]

From: Tong Zhang <ztong0001@gmail.com>

[ Upstream commit d82d5303c4c539db86588ffb5dc5b26c3f1513e8 ]

plat_dev->dev->platform_data is released by platform_device_unregister(),
use of pclk and hclk is a use-after-free. Since device unregister won't
need a clk device we adjust the function call sequence to fix this issue.

[   31.261225] BUG: KASAN: use-after-free in macb_remove+0x77/0xc6 [macb_pci]
[   31.275563] Freed by task 306:
[   30.276782]  platform_device_release+0x25/0x80

Suggested-by: Nicolas Ferre <Nicolas.Ferre@microchip.com>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cadence/macb_pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/cadence/macb_pci.c b/drivers/net/ethernet/cadence/macb_pci.c
index 8b7b59908a1a..f66d22de5168 100644
--- a/drivers/net/ethernet/cadence/macb_pci.c
+++ b/drivers/net/ethernet/cadence/macb_pci.c
@@ -111,9 +111,9 @@ static void macb_remove(struct pci_dev *pdev)
 	struct platform_device *plat_dev = pci_get_drvdata(pdev);
 	struct macb_platform_data *plat_data = dev_get_platdata(&plat_dev->dev);
 
-	platform_device_unregister(plat_dev);
 	clk_unregister(plat_data->pclk);
 	clk_unregister(plat_data->hclk);
+	platform_device_unregister(plat_dev);
 }
 
 static const struct pci_device_id dev_id_table[] = {
-- 
2.33.0

[PATCH 5.14 119/162] net: stmmac: allow CSR clock of 300MHz

[Greg Kroah-Hartman]

From: Jesper Nilsson <jesper.nilsson@axis.com>

[ Upstream commit 08dad2f4d541fcfe5e7bfda72cc6314bbfd2802f ]

The Synopsys Ethernet IP uses the CSR clock as a base clock for MDC.
The divisor used is set in the MAC_MDIO_Address register field CR
(Clock Rate)

The divisor is there to change the CSR clock into a clock that falls
below the IEEE 802.3 specified max frequency of 2.5MHz.

If the CSR clock is 300MHz, the code falls back to using the reset
value in the MAC_MDIO_Address register, as described in the comment
above this code.

However, 300MHz is actually an allowed value and the proper divider
can be estimated quite easily (it's just 1Hz difference!)

A CSR frequency of 300MHz with the maximum clock rate value of 0x5
(STMMAC_CSR_250_300M, a divisor of 124) gives somewhere around
~2.42MHz which is below the IEEE 802.3 specified maximum.

For the ARTPEC-8 SoC, the CSR clock is this problematic 300MHz,
and unfortunately, the reset-value of the MAC_MDIO_Address CR field
is 0x0.

This leads to a clock rate of zero and a divisor of 42, and gives an
MDC frequency of ~7.14MHz.

Allow CSR clock of 300MHz by making the comparison inclusive.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 0dbd189c2721..2218bc3a624b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -309,7 +309,7 @@ static void stmmac_clk_csr_set(struct stmmac_priv *priv)
 			priv->clk_csr = STMMAC_CSR_100_150M;
 		else if ((clk_rate >= CSR_F_150M) && (clk_rate < CSR_F_250M))
 			priv->clk_csr = STMMAC_CSR_150_250M;
-		else if ((clk_rate >= CSR_F_250M) && (clk_rate < CSR_F_300M))
+		else if ((clk_rate >= CSR_F_250M) && (clk_rate <= CSR_F_300M))
 			priv->clk_csr = STMMAC_CSR_250_300M;
 	}
 
-- 
2.33.0

[PATCH 5.14 120/162] blk-mq: avoid to iterate over stale request

[Greg Kroah-Hartman]

From: Ming Lei <ming.lei@redhat.com>

[ Upstream commit 67f3b2f822b7e71cfc9b42dbd9f3144fa2933e0b ]

blk-mq can't run allocating driver tag and updating ->rqs[tag]
atomically, meantime blk-mq doesn't clear ->rqs[tag] after the driver
tag is released.

So there is chance to iterating over one stale request just after the
tag is allocated and before updating ->rqs[tag].

scsi_host_busy_iter() calls scsi_host_check_in_flight() to count scsi
in-flight requests after scsi host is blocked, so no new scsi command can
be marked as SCMD_STATE_INFLIGHT. However, driver tag allocation still can
be run by blk-mq core. One request is marked as SCMD_STATE_INFLIGHT,
but this request may have been kept in another slot of ->rqs[], meantime
the slot can be allocated out but ->rqs[] isn't updated yet. Then this
in-flight request is counted twice as SCMD_STATE_INFLIGHT. This way causes
trouble in handling scsi error.

Fixes the issue by not iterating over stale request.

Cc: linux-scsi@vger.kernel.org
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Reported-by: luojiaxing <luojiaxing@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210906065003.439019-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-mq-tag.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/block/blk-mq-tag.c b/block/blk-mq-tag.c
index 86f87346232a..ff5caeb82542 100644
--- a/block/blk-mq-tag.c
+++ b/block/blk-mq-tag.c
@@ -208,7 +208,7 @@ static struct request *blk_mq_find_and_get_req(struct blk_mq_tags *tags,
 
 	spin_lock_irqsave(&tags->lock, flags);
 	rq = tags->rqs[bitnr];
-	if (!rq || !refcount_inc_not_zero(&rq->ref))
+	if (!rq || rq->tag != bitnr || !refcount_inc_not_zero(&rq->ref))
 		rq = NULL;
 	spin_unlock_irqrestore(&tags->lock, flags);
 	return rq;
-- 
2.33.0

[PATCH 5.14 121/162] m68k: Double cast io functions to unsigned long

[Greg Kroah-Hartman]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit b1a89856fbf63fffde6a4771d8f1ac21df549e50 ]

m68k builds fail widely with errors such as

arch/m68k/include/asm/raw_io.h:20:19: error:
	cast to pointer from integer of different size
arch/m68k/include/asm/raw_io.h:30:32: error:
	cast to pointer from integer of different size [-Werror=int-to-p

On m68k, io functions are defined as macros. The problem is seen if the
macro parameter variable size differs from the size of a pointer. Cast
the parameter of all io macros to unsigned long before casting it to
a pointer to fix the problem.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210907060729.2391992-1-linux@roeck-us.net
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/m68k/include/asm/raw_io.h | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/m68k/include/asm/raw_io.h b/arch/m68k/include/asm/raw_io.h
index 911826ea83ce..80eb2396d01e 100644
--- a/arch/m68k/include/asm/raw_io.h
+++ b/arch/m68k/include/asm/raw_io.h
@@ -17,21 +17,21 @@
  * two accesses to memory, which may be undesirable for some devices.
  */
 #define in_8(addr) \
-    ({ u8 __v = (*(__force volatile u8 *) (addr)); __v; })
+    ({ u8 __v = (*(__force volatile u8 *) (unsigned long)(addr)); __v; })
 #define in_be16(addr) \
-    ({ u16 __v = (*(__force volatile u16 *) (addr)); __v; })
+    ({ u16 __v = (*(__force volatile u16 *) (unsigned long)(addr)); __v; })
 #define in_be32(addr) \
-    ({ u32 __v = (*(__force volatile u32 *) (addr)); __v; })
+    ({ u32 __v = (*(__force volatile u32 *) (unsigned long)(addr)); __v; })
 #define in_le16(addr) \
-    ({ u16 __v = le16_to_cpu(*(__force volatile __le16 *) (addr)); __v; })
+    ({ u16 __v = le16_to_cpu(*(__force volatile __le16 *) (unsigned long)(addr)); __v; })
 #define in_le32(addr) \
-    ({ u32 __v = le32_to_cpu(*(__force volatile __le32 *) (addr)); __v; })
+    ({ u32 __v = le32_to_cpu(*(__force volatile __le32 *) (unsigned long)(addr)); __v; })
 
-#define out_8(addr,b) (void)((*(__force volatile u8 *) (addr)) = (b))
-#define out_be16(addr,w) (void)((*(__force volatile u16 *) (addr)) = (w))
-#define out_be32(addr,l) (void)((*(__force volatile u32 *) (addr)) = (l))
-#define out_le16(addr,w) (void)((*(__force volatile __le16 *) (addr)) = cpu_to_le16(w))
-#define out_le32(addr,l) (void)((*(__force volatile __le32 *) (addr)) = cpu_to_le32(l))
+#define out_8(addr,b) (void)((*(__force volatile u8 *) (unsigned long)(addr)) = (b))
+#define out_be16(addr,w) (void)((*(__force volatile u16 *) (unsigned long)(addr)) = (w))
+#define out_be32(addr,l) (void)((*(__force volatile u32 *) (unsigned long)(addr)) = (l))
+#define out_le16(addr,w) (void)((*(__force volatile __le16 *) (unsigned long)(addr)) = cpu_to_le16(w))
+#define out_le32(addr,l) (void)((*(__force volatile __le32 *) (unsigned long)(addr)) = cpu_to_le32(l))
 
 #define raw_inb in_8
 #define raw_inw in_be16
-- 
2.33.0

[PATCH 5.14 122/162] ipv6: delay fib6_sernum increase in fib6_add

[Greg Kroah-Hartman]

From: zhang kai <zhangkaiheb@126.com>

[ Upstream commit e87b5052271e39d62337ade531992b7e5d8c2cfa ]

only increase fib6_sernum in net namespace after add fib6_info
successfully.

Signed-off-by: zhang kai <zhangkaiheb@126.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/ip6_fib.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c
index ef75c9b05f17..68e94e9f5089 100644
--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -1378,7 +1378,6 @@ int fib6_add(struct fib6_node *root, struct fib6_info *rt,
 	int err = -ENOMEM;
 	int allow_create = 1;
 	int replace_required = 0;
-	int sernum = fib6_new_sernum(info->nl_net);
 
 	if (info->nlh) {
 		if (!(info->nlh->nlmsg_flags & NLM_F_CREATE))
@@ -1478,7 +1477,7 @@ int fib6_add(struct fib6_node *root, struct fib6_info *rt,
 	if (!err) {
 		if (rt->nh)
 			list_add(&rt->nh_list, &rt->nh->f6i_list);
-		__fib6_update_sernum_upto_root(rt, sernum);
+		__fib6_update_sernum_upto_root(rt, fib6_new_sernum(info->nl_net));
 		fib6_start_gc(info->nl_net, rt);
 	}
 
-- 
2.33.0

[PATCH 5.14 123/162] dma-debug: prevent an error message from causing runtime problems

[Greg Kroah-Hartman]

From: Hamza Mahfooz <someguy@effective-light.com>

[ Upstream commit 510e1a724ab1bf38150be2c1acabb303f98d0047 ]

For some drivers, that use the DMA API. This error message can be reached
several millions of times per second, causing spam to the kernel's printk
buffer and bringing the CPU usage up to 100% (so, it should be rate
limited). However, since there is at least one driver that is in the
mainline and suffers from the error condition, it is more useful to
err_printk() here instead of just rate limiting the error message (in hopes
that it will make it easier for other drivers that suffer from this issue
to be spotted).

Link: https://lkml.kernel.org/r/fd67fbac-64bf-f0ea-01e1-5938ccfab9d0@arm.com
Reported-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Hamza Mahfooz <someguy@effective-light.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/dma/debug.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/kernel/dma/debug.c b/kernel/dma/debug.c
index f2faa13534e5..70519f67556f 100644
--- a/kernel/dma/debug.c
+++ b/kernel/dma/debug.c
@@ -567,7 +567,8 @@ static void add_dma_entry(struct dma_debug_entry *entry)
 		pr_err("cacheline tracking ENOMEM, dma-debug disabled\n");
 		global_disable = true;
 	} else if (rc == -EEXIST) {
-		pr_err("cacheline tracking EEXIST, overlapping mappings aren't supported\n");
+		err_printk(entry->dev, entry,
+			"cacheline tracking EEXIST, overlapping mappings aren't supported\n");
 	}
 }
 
-- 
2.33.0

[PATCH 5.14 124/162] cpufreq: intel_pstate: Override parameters if HWP forced by BIOS

[Greg Kroah-Hartman]

From: Doug Smythies <doug.smythies@gmail.com>

[ Upstream commit d9a7e9df731670acdc69e81748941ad338f47fab ]

If HWP has been already been enabled by BIOS, it may be
necessary to override some kernel command line parameters.
Once it has been enabled it requires a reset to be disabled.

Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/intel_pstate.c | 22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index bb4549959b11..e7cd3882bda4 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -3251,11 +3251,15 @@ static int __init intel_pstate_init(void)
 	if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
 		return -ENODEV;
 
-	if (no_load)
-		return -ENODEV;
-
 	id = x86_match_cpu(hwp_support_ids);
 	if (id) {
+		bool hwp_forced = intel_pstate_hwp_is_enabled();
+
+		if (hwp_forced)
+			pr_info("HWP enabled by BIOS\n");
+		else if (no_load)
+			return -ENODEV;
+
 		copy_cpu_funcs(&core_funcs);
 		/*
 		 * Avoid enabling HWP for processors without EPP support,
@@ -3265,8 +3269,7 @@ static int __init intel_pstate_init(void)
 		 * If HWP is enabled already, though, there is no choice but to
 		 * deal with it.
 		 */
-		if ((!no_hwp && boot_cpu_has(X86_FEATURE_HWP_EPP)) ||
-		    intel_pstate_hwp_is_enabled()) {
+		if ((!no_hwp && boot_cpu_has(X86_FEATURE_HWP_EPP)) || hwp_forced) {
 			hwp_active++;
 			hwp_mode_bdw = id->driver_data;
 			intel_pstate.attr = hwp_cpufreq_attrs;
@@ -3278,7 +3281,11 @@ static int __init intel_pstate_init(void)
 
 			goto hwp_cpu_matched;
 		}
+		pr_info("HWP not enabled\n");
 	} else {
+		if (no_load)
+			return -ENODEV;
+
 		id = x86_match_cpu(intel_pstate_cpu_ids);
 		if (!id) {
 			pr_info("CPU model not supported\n");
@@ -3357,10 +3364,9 @@ static int __init intel_pstate_setup(char *str)
 	else if (!strcmp(str, "passive"))
 		default_driver = &intel_cpufreq;
 
-	if (!strcmp(str, "no_hwp")) {
-		pr_info("HWP disabled\n");
+	if (!strcmp(str, "no_hwp"))
 		no_hwp = 1;
-	}
+
 	if (!strcmp(str, "force"))
 		force_load = 1;
 	if (!strcmp(str, "hwp_only"))
-- 
2.33.0

[PATCH 5.14 125/162] bpf: Add oversize check before call kvcalloc()

[Greg Kroah-Hartman]

From: Bixuan Cui <cuibixuan@huawei.com>

[ Upstream commit 0e6491b559704da720f6da09dd0a52c4df44c514 ]

Commit 7661809d493b ("mm: don't allow oversized kvmalloc() calls") add the
oversize check. When the allocation is larger than what kmalloc() supports,
the following warning triggered:

WARNING: CPU: 0 PID: 8408 at mm/util.c:597 kvmalloc_node+0x108/0x110 mm/util.c:597
Modules linked in:
CPU: 0 PID: 8408 Comm: syz-executor221 Not tainted 5.14.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:kvmalloc_node+0x108/0x110 mm/util.c:597
Call Trace:
 kvmalloc include/linux/mm.h:806 [inline]
 kvmalloc_array include/linux/mm.h:824 [inline]
 kvcalloc include/linux/mm.h:829 [inline]
 check_btf_line kernel/bpf/verifier.c:9925 [inline]
 check_btf_info kernel/bpf/verifier.c:10049 [inline]
 bpf_check+0xd634/0x150d0 kernel/bpf/verifier.c:13759
 bpf_prog_load kernel/bpf/syscall.c:2301 [inline]
 __sys_bpf+0x11181/0x126e0 kernel/bpf/syscall.c:4587
 __do_sys_bpf kernel/bpf/syscall.c:4691 [inline]
 __se_sys_bpf kernel/bpf/syscall.c:4689 [inline]
 __x64_sys_bpf+0x78/0x90 kernel/bpf/syscall.c:4689
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Reported-by: syzbot+f3e749d4c662818ae439@syzkaller.appspotmail.com
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210911005557.45518-1-cuibixuan@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/verifier.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 9d94ac6ff50c..592b9b68cbd9 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -9641,6 +9641,8 @@ static int check_btf_line(struct bpf_verifier_env *env,
 	nr_linfo = attr->line_info_cnt;
 	if (!nr_linfo)
 		return 0;
+	if (nr_linfo > INT_MAX / sizeof(struct bpf_line_info))
+		return -EINVAL;
 
 	rec_size = attr->line_info_rec_size;
 	if (rec_size < MIN_BPF_LINEINFO_SIZE ||
-- 
2.33.0

[PATCH 5.14 126/162] xen/balloon: use a kernel thread instead a workqueue

[Greg Kroah-Hartman]

From: Juergen Gross <jgross@suse.com>

[ Upstream commit 8480ed9c2bbd56fc86524998e5f2e3e22f5038f6 ]

Today the Xen ballooning is done via delayed work in a workqueue. This
might result in workqueue hangups being reported in case of large
amounts of memory are being ballooned in one go (here 16GB):

BUG: workqueue lockup - pool cpus=6 node=0 flags=0x0 nice=0 stuck for 64s!
Showing busy workqueues and worker pools:
workqueue events: flags=0x0
  pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=2/256 refcnt=3
    in-flight: 229:balloon_process
    pending: cache_reap
workqueue events_freezable_power_: flags=0x84
  pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
    pending: disk_events_workfn
workqueue mm_percpu_wq: flags=0x8
  pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
    pending: vmstat_update
pool 12: cpus=6 node=0 flags=0x0 nice=0 hung=64s workers=3 idle: 2222 43

This can easily be avoided by using a dedicated kernel thread for doing
the ballooning work.

Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210827123206.15429-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/xen/balloon.c | 62 +++++++++++++++++++++++++++++++------------
 1 file changed, 45 insertions(+), 17 deletions(-)

diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index 671c71245a7b..2d2803883306 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -43,6 +43,8 @@
 #include <linux/sched.h>
 #include <linux/cred.h>
 #include <linux/errno.h>
+#include <linux/freezer.h>
+#include <linux/kthread.h>
 #include <linux/mm.h>
 #include <linux/memblock.h>
 #include <linux/pagemap.h>
@@ -115,7 +117,7 @@ static struct ctl_table xen_root[] = {
 #define EXTENT_ORDER (fls(XEN_PFN_PER_PAGE) - 1)
 
 /*
- * balloon_process() state:
+ * balloon_thread() state:
  *
  * BP_DONE: done or nothing to do,
  * BP_WAIT: wait to be rescheduled,
@@ -130,6 +132,8 @@ enum bp_state {
 	BP_ECANCELED
 };
 
+/* Main waiting point for xen-balloon thread. */
+static DECLARE_WAIT_QUEUE_HEAD(balloon_thread_wq);
 
 static DEFINE_MUTEX(balloon_mutex);
 
@@ -144,10 +148,6 @@ static xen_pfn_t frame_list[PAGE_SIZE / sizeof(xen_pfn_t)];
 static LIST_HEAD(ballooned_pages);
 static DECLARE_WAIT_QUEUE_HEAD(balloon_wq);
 
-/* Main work function, always executed in process context. */
-static void balloon_process(struct work_struct *work);
-static DECLARE_DELAYED_WORK(balloon_worker, balloon_process);
-
 /* When ballooning out (allocating memory to return to Xen) we don't really
    want the kernel to try too hard since that can trigger the oom killer. */
 #define GFP_BALLOON \
@@ -366,7 +366,7 @@ static void xen_online_page(struct page *page, unsigned int order)
 static int xen_memory_notifier(struct notifier_block *nb, unsigned long val, void *v)
 {
 	if (val == MEM_ONLINE)
-		schedule_delayed_work(&balloon_worker, 0);
+		wake_up(&balloon_thread_wq);
 
 	return NOTIFY_OK;
 }
@@ -491,18 +491,43 @@ static enum bp_state decrease_reservation(unsigned long nr_pages, gfp_t gfp)
 }
 
 /*
- * As this is a work item it is guaranteed to run as a single instance only.
+ * Stop waiting if either state is not BP_EAGAIN and ballooning action is
+ * needed, or if the credit has changed while state is BP_EAGAIN.
+ */
+static bool balloon_thread_cond(enum bp_state state, long credit)
+{
+	if (state != BP_EAGAIN)
+		credit = 0;
+
+	return current_credit() != credit || kthread_should_stop();
+}
+
+/*
+ * As this is a kthread it is guaranteed to run as a single instance only.
  * We may of course race updates of the target counts (which are protected
  * by the balloon lock), or with changes to the Xen hard limit, but we will
  * recover from these in time.
  */
-static void balloon_process(struct work_struct *work)
+static int balloon_thread(void *unused)
 {
 	enum bp_state state = BP_DONE;
 	long credit;
+	unsigned long timeout;
+
+	set_freezable();
+	for (;;) {
+		if (state == BP_EAGAIN)
+			timeout = balloon_stats.schedule_delay * HZ;
+		else
+			timeout = 3600 * HZ;
+		credit = current_credit();
 
+		wait_event_interruptible_timeout(balloon_thread_wq,
+				 balloon_thread_cond(state, credit), timeout);
+
+		if (kthread_should_stop())
+			return 0;
 
-	do {
 		mutex_lock(&balloon_mutex);
 
 		credit = current_credit();
@@ -529,12 +554,7 @@ static void balloon_process(struct work_struct *work)
 		mutex_unlock(&balloon_mutex);
 
 		cond_resched();
-
-	} while (credit && state == BP_DONE);
-
-	/* Schedule more work if there is some still to be done. */
-	if (state == BP_EAGAIN)
-		schedule_delayed_work(&balloon_worker, balloon_stats.schedule_delay * HZ);
+	}
 }
 
 /* Resets the Xen limit, sets new target, and kicks off processing. */
@@ -542,7 +562,7 @@ void balloon_set_new_target(unsigned long target)
 {
 	/* No need for lock. Not read-modify-write updates. */
 	balloon_stats.target_pages = target;
-	schedule_delayed_work(&balloon_worker, 0);
+	wake_up(&balloon_thread_wq);
 }
 EXPORT_SYMBOL_GPL(balloon_set_new_target);
 
@@ -647,7 +667,7 @@ void free_xenballooned_pages(int nr_pages, struct page **pages)
 
 	/* The balloon may be too large now. Shrink it if needed. */
 	if (current_credit())
-		schedule_delayed_work(&balloon_worker, 0);
+		wake_up(&balloon_thread_wq);
 
 	mutex_unlock(&balloon_mutex);
 }
@@ -679,6 +699,8 @@ static void __init balloon_add_region(unsigned long start_pfn,
 
 static int __init balloon_init(void)
 {
+	struct task_struct *task;
+
 	if (!xen_domain())
 		return -ENODEV;
 
@@ -722,6 +744,12 @@ static int __init balloon_init(void)
 	}
 #endif
 
+	task = kthread_run(balloon_thread, NULL, "xen-balloon");
+	if (IS_ERR(task)) {
+		pr_err("xen-balloon thread could not be started, ballooning will not work!\n");
+		return PTR_ERR(task);
+	}
+
 	/* Init the xen-balloon driver. */
 	xen_balloon_init();
 
-- 
2.33.0

[PATCH 5.14 127/162] nvme-multipath: fix ANA state updates when a namespace is not present

[Greg Kroah-Hartman]

From: Anton Eidelman <anton.eidelman@gmail.com>

[ Upstream commit 79f528afa93918519574773ea49a444c104bc1bd ]

nvme_update_ana_state() has a deficiency that results in a failure to
properly update the ana state for a namespace in the following case:

  NSIDs in ctrl->namespaces:	1, 3,    4
  NSIDs in desc->nsids:		1, 2, 3, 4

Loop iteration 0:
    ns index = 0, n = 0, ns->head->ns_id = 1, nsid = 1, MATCH.
Loop iteration 1:
    ns index = 1, n = 1, ns->head->ns_id = 3, nsid = 2, NO MATCH.
Loop iteration 2:
    ns index = 2, n = 2, ns->head->ns_id = 4, nsid = 4, MATCH.

Where the update to the ANA state of NSID 3 is missed.  To fix this
increment n and retry the update with the same ns when ns->head->ns_id is
higher than nsid,

Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/multipath.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index 3f32c5e86bfc..abc9bdfd48bd 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -583,14 +583,17 @@ static int nvme_update_ana_state(struct nvme_ctrl *ctrl,
 
 	down_read(&ctrl->namespaces_rwsem);
 	list_for_each_entry(ns, &ctrl->namespaces, list) {
-		unsigned nsid = le32_to_cpu(desc->nsids[n]);
-
+		unsigned nsid;
+again:
+		nsid = le32_to_cpu(desc->nsids[n]);
 		if (ns->head->ns_id < nsid)
 			continue;
 		if (ns->head->ns_id == nsid)
 			nvme_update_ns_ana_state(desc, ns);
 		if (++n == nr_nsids)
 			break;
+		if (ns->head->ns_id > nsid)
+			goto again;
 	}
 	up_read(&ctrl->namespaces_rwsem);
 	return 0;
-- 
2.33.0

[PATCH 5.14 128/162] nvme-rdma: destroy cm id before destroy qp to avoid use after free

[Greg Kroah-Hartman]

From: Ruozhu Li <liruozhu@huawei.com>

[ Upstream commit 9817d763dbe15327b9b3ff4404fa6f27f927e744 ]

We should always destroy cm_id before destroy qp to avoid to get cma
event after qp was destroyed, which may lead to use after free.
In RDMA connection establishment error flow, don't destroy qp in cm
event handler.Just report cm_error to upper level, qp will be destroy
in nvme_rdma_alloc_queue() after destroy cm id.

Signed-off-by: Ruozhu Li <liruozhu@huawei.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/rdma.c | 16 +++-------------
 1 file changed, 3 insertions(+), 13 deletions(-)

diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c
index a68704e39084..042c594bc57e 100644
--- a/drivers/nvme/host/rdma.c
+++ b/drivers/nvme/host/rdma.c
@@ -656,8 +656,8 @@ static void nvme_rdma_free_queue(struct nvme_rdma_queue *queue)
 	if (!test_and_clear_bit(NVME_RDMA_Q_ALLOCATED, &queue->flags))
 		return;
 
-	nvme_rdma_destroy_queue_ib(queue);
 	rdma_destroy_id(queue->cm_id);
+	nvme_rdma_destroy_queue_ib(queue);
 	mutex_destroy(&queue->queue_lock);
 }
 
@@ -1815,14 +1815,10 @@ static int nvme_rdma_conn_established(struct nvme_rdma_queue *queue)
 	for (i = 0; i < queue->queue_size; i++) {
 		ret = nvme_rdma_post_recv(queue, &queue->rsp_ring[i]);
 		if (ret)
-			goto out_destroy_queue_ib;
+			return ret;
 	}
 
 	return 0;
-
-out_destroy_queue_ib:
-	nvme_rdma_destroy_queue_ib(queue);
-	return ret;
 }
 
 static int nvme_rdma_conn_rejected(struct nvme_rdma_queue *queue,
@@ -1916,14 +1912,10 @@ static int nvme_rdma_route_resolved(struct nvme_rdma_queue *queue)
 	if (ret) {
 		dev_err(ctrl->ctrl.device,
 			"rdma_connect_locked failed (%d).\n", ret);
-		goto out_destroy_queue_ib;
+		return ret;
 	}
 
 	return 0;
-
-out_destroy_queue_ib:
-	nvme_rdma_destroy_queue_ib(queue);
-	return ret;
 }
 
 static int nvme_rdma_cm_handler(struct rdma_cm_id *cm_id,
@@ -1954,8 +1946,6 @@ static int nvme_rdma_cm_handler(struct rdma_cm_id *cm_id,
 	case RDMA_CM_EVENT_ROUTE_ERROR:
 	case RDMA_CM_EVENT_CONNECT_ERROR:
 	case RDMA_CM_EVENT_UNREACHABLE:
-		nvme_rdma_destroy_queue_ib(queue);
-		fallthrough;
 	case RDMA_CM_EVENT_ADDR_ERROR:
 		dev_dbg(queue->ctrl->ctrl.device,
 			"CM error event %d\n", ev->event);
-- 
2.33.0

[PATCH 5.14 129/162] sparc32: page align size in arch_dma_alloc

[Greg Kroah-Hartman]

From: Andreas Larsson <andreas@gaisler.com>

[ Upstream commit 59583f747664046aaae5588d56d5954fab66cce8 ]

Commit 53b7670e5735 ("sparc: factor the dma coherent mapping into
helper") lost the page align for the calls to dma_make_coherent and
srmmu_unmapiorange. The latter cannot handle a non page aligned len
argument.

Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sparc/kernel/ioport.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index 8e1d72a16759..7ceae24b0ca9 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -356,7 +356,9 @@ err_nomem:
 void arch_dma_free(struct device *dev, size_t size, void *cpu_addr,
 		dma_addr_t dma_addr, unsigned long attrs)
 {
-	if (!sparc_dma_free_resource(cpu_addr, PAGE_ALIGN(size)))
+	size = PAGE_ALIGN(size);
+
+	if (!sparc_dma_free_resource(cpu_addr, size))
 		return;
 
 	dma_make_coherent(dma_addr, size);
-- 
2.33.0

[PATCH 5.14 130/162] amd/display: downgrade validation failure log level

[Greg Kroah-Hartman]

From: Simon Ser <contact@emersion.fr>

[ Upstream commit 7bbee36d71502ab9a341505da89a017c7ae2e6b2 ]

In amdgpu_dm_atomic_check, dc_validate_global_state is called. On
failure this logs a warning to the kernel journal. However warnings
shouldn't be used for atomic test-only commit failures: user-space
might be perfoming a lot of atomic test-only commits to find the
best hardware configuration.

Downgrade the log to a regular DRM atomic message. While at it, use
the new device-aware logging infrastructure.

This fixes error messages in the kernel when running gamescope [1].

[1]: https://github.com/Plagman/gamescope/issues/245

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 6a4c6c47dcfa..a4a4bb43c108 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -10469,7 +10469,8 @@ static int amdgpu_dm_atomic_check(struct drm_device *dev,
 			goto fail;
 		status = dc_validate_global_state(dc, dm_state->context, false);
 		if (status != DC_OK) {
-			DC_LOG_WARNING("DC global validation failure: %s (%d)",
+			drm_dbg_atomic(dev,
+				       "DC global validation failure: %s (%d)",
 				       dc_status_to_str(status), status);
 			ret = -EINVAL;
 			goto fail;
-- 
2.33.0

[PATCH 5.14 131/162] drm/ttm: fix type mismatch error on sparc64

[Greg Kroah-Hartman]

From: Huang Rui <ray.huang@amd.com>

[ Upstream commit 3ca706c189db861b2ca2019a0901b94050ca49d8 ]

On sparc64, __fls() returns an "int", but the drm TTM code expected it
to be "unsigned long" as on x86.  As a result, on sparc (and arc, and
m68k) you get build errors because 'min()' checks that the types match.

As suggested by Linus, it can use min_t instead of min to force the type
to be "unsigned int".

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/ttm/ttm_pool.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/ttm/ttm_pool.c b/drivers/gpu/drm/ttm/ttm_pool.c
index cb38b1a17b09..82cbb29a05aa 100644
--- a/drivers/gpu/drm/ttm/ttm_pool.c
+++ b/drivers/gpu/drm/ttm/ttm_pool.c
@@ -383,7 +383,8 @@ int ttm_pool_alloc(struct ttm_pool *pool, struct ttm_tt *tt,
 	else
 		gfp_flags |= GFP_HIGHUSER;
 
-	for (order = min(MAX_ORDER - 1UL, __fls(num_pages)); num_pages;
+	for (order = min_t(unsigned int, MAX_ORDER - 1, __fls(num_pages));
+	     num_pages;
 	     order = min_t(unsigned int, order, __fls(num_pages))) {
 		bool apply_caching = false;
 		struct ttm_pool_type *pt;
-- 
2.33.0

[PATCH 5.14 132/162] block: check if a profile is actually registered in blk_integrity_unregister

[Greg Kroah-Hartman]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit 783a40a1b3ac7f3714d2776fa8ac8cce3535e4f6 ]

While clearing the profile itself is harmless, we really should not clear
the stable writes flag if it wasn't set due to a registered integrity
profile.

Reported-by: Lihong Kou <koulihong@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20210914070657.87677-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-integrity.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/block/blk-integrity.c b/block/blk-integrity.c
index 410da060d1f5..e9f943de377a 100644
--- a/block/blk-integrity.c
+++ b/block/blk-integrity.c
@@ -426,8 +426,12 @@ EXPORT_SYMBOL(blk_integrity_register);
  */
 void blk_integrity_unregister(struct gendisk *disk)
 {
+	struct blk_integrity *bi = &disk->queue->integrity;
+
+	if (!bi->profile)
+		return;
 	blk_queue_flag_clear(QUEUE_FLAG_STABLE_WRITES, disk->queue);
-	memset(&disk->queue->integrity, 0, sizeof(struct blk_integrity));
+	memset(bi, 0, sizeof(*bi));
 }
 EXPORT_SYMBOL(blk_integrity_unregister);
 
-- 
2.33.0

[PATCH 5.14 133/162] block: flush the integrity workqueue in blk_integrity_unregister

[Greg Kroah-Hartman]

From: Lihong Kou <koulihong@huawei.com>

[ Upstream commit 3df49967f6f1d2121b0c27c381ca1c8386b1dab9 ]

When the integrity profile is unregistered there can still be integrity
reads queued up which could see a NULL verify_fn as shown by the race
window below:

CPU0                                    CPU1
  process_one_work                      nvme_validate_ns
    bio_integrity_verify_fn                nvme_update_ns_info
	                                     nvme_update_disk_info
	                                       blk_integrity_unregister
                                               ---set queue->integrity as 0
	bio_integrity_process
	--access bi->profile->verify_fn(bi is a pointer of queue->integity)

Before calling blk_integrity_unregister in nvme_update_disk_info, we must
make sure that there is no work item in the kintegrityd_wq. Just call
blk_flush_integrity to flush the work queue so the bug can be resolved.

Signed-off-by: Lihong Kou <koulihong@huawei.com>
[hch: split up and shortened the changelog]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20210914070657.87677-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-integrity.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/block/blk-integrity.c b/block/blk-integrity.c
index e9f943de377a..9e83159f5a52 100644
--- a/block/blk-integrity.c
+++ b/block/blk-integrity.c
@@ -430,6 +430,9 @@ void blk_integrity_unregister(struct gendisk *disk)
 
 	if (!bi->profile)
 		return;
+
+	/* ensure all bios are off the integrity workqueue */
+	blk_flush_integrity();
 	blk_queue_flag_clear(QUEUE_FLAG_STABLE_WRITES, disk->queue);
 	memset(bi, 0, sizeof(*bi));
 }
-- 
2.33.0

[PATCH 5.14 134/162] blk-cgroup: fix UAF by grabbing blkcg lock before destroying blkg pd

[Greg Kroah-Hartman]

From: Li Jinlin <lijinlin3@huawei.com>

[ Upstream commit 858560b27645e7e97aca37ee8f232cccd658fbd2 ]

KASAN reports a use-after-free report when doing fuzz test:

[693354.104835] ==================================================================
[693354.105094] BUG: KASAN: use-after-free in bfq_io_set_weight_legacy+0xd3/0x160
[693354.105336] Read of size 4 at addr ffff888be0a35664 by task sh/1453338

[693354.105607] CPU: 41 PID: 1453338 Comm: sh Kdump: loaded Not tainted 4.18.0-147
[693354.105610] Hardware name: Huawei 2288H V5/BC11SPSCB0, BIOS 0.81 07/02/2018
[693354.105612] Call Trace:
[693354.105621]  dump_stack+0xf1/0x19b
[693354.105626]  ? show_regs_print_info+0x5/0x5
[693354.105634]  ? printk+0x9c/0xc3
[693354.105638]  ? cpumask_weight+0x1f/0x1f
[693354.105648]  print_address_description+0x70/0x360
[693354.105654]  kasan_report+0x1b2/0x330
[693354.105659]  ? bfq_io_set_weight_legacy+0xd3/0x160
[693354.105665]  ? bfq_io_set_weight_legacy+0xd3/0x160
[693354.105670]  bfq_io_set_weight_legacy+0xd3/0x160
[693354.105675]  ? bfq_cpd_init+0x20/0x20
[693354.105683]  cgroup_file_write+0x3aa/0x510
[693354.105693]  ? ___slab_alloc+0x507/0x540
[693354.105698]  ? cgroup_file_poll+0x60/0x60
[693354.105702]  ? 0xffffffff89600000
[693354.105708]  ? usercopy_abort+0x90/0x90
[693354.105716]  ? mutex_lock+0xef/0x180
[693354.105726]  kernfs_fop_write+0x1ab/0x280
[693354.105732]  ? cgroup_file_poll+0x60/0x60
[693354.105738]  vfs_write+0xe7/0x230
[693354.105744]  ksys_write+0xb0/0x140
[693354.105749]  ? __ia32_sys_read+0x50/0x50
[693354.105760]  do_syscall_64+0x112/0x370
[693354.105766]  ? syscall_return_slowpath+0x260/0x260
[693354.105772]  ? do_page_fault+0x9b/0x270
[693354.105779]  ? prepare_exit_to_usermode+0xf9/0x1a0
[693354.105784]  ? enter_from_user_mode+0x30/0x30
[693354.105793]  entry_SYSCALL_64_after_hwframe+0x65/0xca

[693354.105875] Allocated by task 1453337:
[693354.106001]  kasan_kmalloc+0xa0/0xd0
[693354.106006]  kmem_cache_alloc_node_trace+0x108/0x220
[693354.106010]  bfq_pd_alloc+0x96/0x120
[693354.106015]  blkcg_activate_policy+0x1b7/0x2b0
[693354.106020]  bfq_create_group_hierarchy+0x1e/0x80
[693354.106026]  bfq_init_queue+0x678/0x8c0
[693354.106031]  blk_mq_init_sched+0x1f8/0x460
[693354.106037]  elevator_switch_mq+0xe1/0x240
[693354.106041]  elevator_switch+0x25/0x40
[693354.106045]  elv_iosched_store+0x1a1/0x230
[693354.106049]  queue_attr_store+0x78/0xb0
[693354.106053]  kernfs_fop_write+0x1ab/0x280
[693354.106056]  vfs_write+0xe7/0x230
[693354.106060]  ksys_write+0xb0/0x140
[693354.106064]  do_syscall_64+0x112/0x370
[693354.106069]  entry_SYSCALL_64_after_hwframe+0x65/0xca

[693354.106114] Freed by task 1453336:
[693354.106225]  __kasan_slab_free+0x130/0x180
[693354.106229]  kfree+0x90/0x1b0
[693354.106233]  blkcg_deactivate_policy+0x12c/0x220
[693354.106238]  bfq_exit_queue+0xf5/0x110
[693354.106241]  blk_mq_exit_sched+0x104/0x130
[693354.106245]  __elevator_exit+0x45/0x60
[693354.106249]  elevator_switch_mq+0xd6/0x240
[693354.106253]  elevator_switch+0x25/0x40
[693354.106257]  elv_iosched_store+0x1a1/0x230
[693354.106261]  queue_attr_store+0x78/0xb0
[693354.106264]  kernfs_fop_write+0x1ab/0x280
[693354.106268]  vfs_write+0xe7/0x230
[693354.106271]  ksys_write+0xb0/0x140
[693354.106275]  do_syscall_64+0x112/0x370
[693354.106280]  entry_SYSCALL_64_after_hwframe+0x65/0xca

[693354.106329] The buggy address belongs to the object at ffff888be0a35580
                 which belongs to the cache kmalloc-1k of size 1024
[693354.106736] The buggy address is located 228 bytes inside of
                 1024-byte region [ffff888be0a35580, ffff888be0a35980)
[693354.107114] The buggy address belongs to the page:
[693354.107273] page:ffffea002f828c00 count:1 mapcount:0 mapping:ffff888107c17080 index:0x0 compound_mapcount: 0
[693354.107606] flags: 0x17ffffc0008100(slab|head)
[693354.107760] raw: 0017ffffc0008100 ffffea002fcbc808 ffffea0030bd3a08 ffff888107c17080
[693354.108020] raw: 0000000000000000 00000000001c001c 00000001ffffffff 0000000000000000
[693354.108278] page dumped because: kasan: bad access detected

[693354.108511] Memory state around the buggy address:
[693354.108671]  ffff888be0a35500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[693354.116396]  ffff888be0a35580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[693354.124473] >ffff888be0a35600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[693354.132421]                                                        ^
[693354.140284]  ffff888be0a35680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[693354.147912]  ffff888be0a35700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[693354.155281] ==================================================================

blkgs are protected by both queue and blkcg locks and holding
either should stabilize them. However, the path of destroying
blkg policy data is only protected by queue lock in
blkcg_activate_policy()/blkcg_deactivate_policy(). Other tasks
can get the blkg policy data before the blkg policy data is
destroyed, and use it after destroyed, which will result in a
use-after-free.

CPU0                             CPU1
blkcg_deactivate_policy
  spin_lock_irq(&q->queue_lock)
                                 bfq_io_set_weight_legacy
                                   spin_lock_irq(&blkcg->lock)
                                   blkg_to_bfqg(blkg)
                                     pd_to_bfqg(blkg->pd[pol->plid])
                                     ^^^^^^blkg->pd[pol->plid] != NULL
                                           bfqg != NULL
  pol->pd_free_fn(blkg->pd[pol->plid])
    pd_to_bfqg(blkg->pd[pol->plid])
    bfqg_put(bfqg)
      kfree(bfqg)
  blkg->pd[pol->plid] = NULL
  spin_unlock_irq(q->queue_lock);
                                   bfq_group_set_weight(bfqg, val, 0)
                                     bfqg->entity.new_weight
                                     ^^^^^^trigger uaf here
                                   spin_unlock_irq(&blkcg->lock);

Fix by grabbing the matching blkcg lock before trying to
destroy blkg policy data.

Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Li Jinlin <lijinlin3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20210914042605.3260596-1-lijinlin3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-cgroup.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
index 26446f97deee..28e11decbac5 100644
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -1385,10 +1385,14 @@ enomem:
 	/* alloc failed, nothing's initialized yet, free everything */
 	spin_lock_irq(&q->queue_lock);
 	list_for_each_entry(blkg, &q->blkg_list, q_node) {
+		struct blkcg *blkcg = blkg->blkcg;
+
+		spin_lock(&blkcg->lock);
 		if (blkg->pd[pol->plid]) {
 			pol->pd_free_fn(blkg->pd[pol->plid]);
 			blkg->pd[pol->plid] = NULL;
 		}
+		spin_unlock(&blkcg->lock);
 	}
 	spin_unlock_irq(&q->queue_lock);
 	ret = -ENOMEM;
@@ -1420,12 +1424,16 @@ void blkcg_deactivate_policy(struct request_queue *q,
 	__clear_bit(pol->plid, q->blkcg_pols);
 
 	list_for_each_entry(blkg, &q->blkg_list, q_node) {
+		struct blkcg *blkcg = blkg->blkcg;
+
+		spin_lock(&blkcg->lock);
 		if (blkg->pd[pol->plid]) {
 			if (pol->pd_offline_fn)
 				pol->pd_offline_fn(blkg->pd[pol->plid]);
 			pol->pd_free_fn(blkg->pd[pol->plid]);
 			blkg->pd[pol->plid] = NULL;
 		}
+		spin_unlock(&blkcg->lock);
 	}
 
 	spin_unlock_irq(&q->queue_lock);
-- 
2.33.0

[PATCH 5.14 135/162] compiler.h: Introduce absolute_pointer macro

[Greg Kroah-Hartman]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit f6b5f1a56987de837f8e25cd560847106b8632a8 ]

absolute_pointer() disassociates a pointer from its originating symbol
type and context. Use it to prevent compiler warnings/errors such as

  drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe':
  arch/m68k/include/asm/string.h:72:25: error:
	'__builtin_memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread]

Such warnings may be reported by gcc 11.x for string and memory
operations on fixed addresses.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/compiler.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/compiler.h b/include/linux/compiler.h
index b67261a1e3e9..3d5af56337bd 100644
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -188,6 +188,8 @@ void ftrace_likely_update(struct ftrace_likely_data *f, int val,
     (typeof(ptr)) (__ptr + (off)); })
 #endif
 
+#define absolute_pointer(val)	RELOC_HIDE((void *)(val), 0)
+
 #ifndef OPTIMIZER_HIDE_VAR
 /* Make the optimizer believe the variable can be manipulated arbitrarily. */
 #define OPTIMIZER_HIDE_VAR(var)						\
-- 
2.33.0

[PATCH 5.14 136/162] net: i825xx: Use absolute_pointer for memcpy from fixed memory location

[Greg Kroah-Hartman]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit dff2d13114f0beec448da9b3716204eb34b0cf41 ]

gcc 11.x reports the following compiler warning/error.

  drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe':
  arch/m68k/include/asm/string.h:72:25: error:
	'__builtin_memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread]

Use absolute_pointer() to work around the problem.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/i825xx/82596.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/i825xx/82596.c b/drivers/net/ethernet/i825xx/82596.c
index fc8c7cd67471..8b12a5ab3818 100644
--- a/drivers/net/ethernet/i825xx/82596.c
+++ b/drivers/net/ethernet/i825xx/82596.c
@@ -1155,7 +1155,7 @@ struct net_device * __init i82596_probe(int unit)
 			err = -ENODEV;
 			goto out;
 		}
-		memcpy(eth_addr, (void *) 0xfffc1f2c, ETH_ALEN);	/* YUCK! Get addr from NOVRAM */
+		memcpy(eth_addr, absolute_pointer(0xfffc1f2c), ETH_ALEN); /* YUCK! Get addr from NOVRAM */
 		dev->base_addr = MVME_I596_BASE;
 		dev->irq = (unsigned) MVME16x_IRQ_I596;
 		goto found;
-- 
2.33.0

[PATCH 5.14 137/162] sparc: avoid stringop-overread errors

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

[ Upstream commit fc7c028dcdbfe981bca75d2a7b95f363eb691ef3 ]

The sparc mdesc code does pointer games with 'struct mdesc_hdr', but
didn't describe to the compiler how that header is then followed by the
data that the header describes.

As a result, gcc is now unhappy since it does stricter pointer range
tracking, and doesn't understand about how these things work.  This
results in various errors like:

    arch/sparc/kernel/mdesc.c: In function ‘mdesc_node_by_name’:
    arch/sparc/kernel/mdesc.c:647:22: error: ‘strcmp’ reading 1 or more bytes from a region of size 0 [-Werror=stringop-overread]
      647 |                 if (!strcmp(names + ep[ret].name_offset, name))
          |                      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

which are easily avoided by just describing 'struct mdesc_hdr' better,
and making the node_block() helper function look into that unsized
data[] that follows the header.

This makes the sparc64 build happy again at least for my cross-compiler
version (gcc version 11.2.1).

Link: https://lore.kernel.org/lkml/CAHk-=wi4NW3NC0xWykkw=6LnjQD6D_rtRtxY9g8gQAJXtQMi8A@mail.gmail.com/
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sparc/kernel/mdesc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/sparc/kernel/mdesc.c b/arch/sparc/kernel/mdesc.c
index 8e645ddac58e..30f171b7b00c 100644
--- a/arch/sparc/kernel/mdesc.c
+++ b/arch/sparc/kernel/mdesc.c
@@ -39,6 +39,7 @@ struct mdesc_hdr {
 	u32	node_sz; /* node block size */
 	u32	name_sz; /* name block size */
 	u32	data_sz; /* data block size */
+	char	data[];
 } __attribute__((aligned(16)));
 
 struct mdesc_elem {
@@ -612,7 +613,7 @@ EXPORT_SYMBOL(mdesc_get_node_info);
 
 static struct mdesc_elem *node_block(struct mdesc_hdr *mdesc)
 {
-	return (struct mdesc_elem *) (mdesc + 1);
+	return (struct mdesc_elem *) mdesc->data;
 }
 
 static void *name_block(struct mdesc_hdr *mdesc)
-- 
2.33.0

[PATCH 5.14 138/162] qnx4: avoid stringop-overread errors

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

[ Upstream commit b7213ffa0e585feb1aee3e7173e965e66ee0abaa ]

The qnx4 directory entries are 64-byte blocks that have different
contents depending on the a status byte that is in the last byte of the
block.

In particular, a directory entry can be either a "link info" entry with
a 48-byte name and pointers to the real inode information, or an "inode
entry" with a smaller 16-byte name and the full inode information.

But the code was written to always just treat the directory name as if
it was part of that "inode entry", and just extend the name to the
longer case if the status byte said it was a link entry.

That work just fine and gives the right results, but now that gcc is
tracking data structure accesses much more, the code can trigger a
compiler error about using up to 48 bytes (the long name) in a structure
that only has that shorter name in it:

   fs/qnx4/dir.c: In function ‘qnx4_readdir’:
   fs/qnx4/dir.c:51:32: error: ‘strnlen’ specified bound 48 exceeds source size 16 [-Werror=stringop-overread]
      51 |                         size = strnlen(de->di_fname, size);
         |                                ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   In file included from fs/qnx4/qnx4.h:3,
                    from fs/qnx4/dir.c:16:
   include/uapi/linux/qnx4_fs.h:45:25: note: source object declared here
      45 |         char            di_fname[QNX4_SHORT_NAME_MAX];
         |                         ^~~~~~~~

which is because the source code doesn't really make this whole "one of
two different types" explicit.

Fix this by introducing a very explicit union of the two types, and
basically explaining to the compiler what is really going on.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/qnx4/dir.c | 51 ++++++++++++++++++++++++++++++++++-----------------
 1 file changed, 34 insertions(+), 17 deletions(-)

diff --git a/fs/qnx4/dir.c b/fs/qnx4/dir.c
index a6ee23aadd28..2a66844b7ff8 100644
--- a/fs/qnx4/dir.c
+++ b/fs/qnx4/dir.c
@@ -15,13 +15,27 @@
 #include <linux/buffer_head.h>
 #include "qnx4.h"
 
+/*
+ * A qnx4 directory entry is an inode entry or link info
+ * depending on the status field in the last byte. The
+ * first byte is where the name start either way, and a
+ * zero means it's empty.
+ */
+union qnx4_directory_entry {
+	struct {
+		char de_name;
+		char de_pad[62];
+		char de_status;
+	};
+	struct qnx4_inode_entry inode;
+	struct qnx4_link_info link;
+};
+
 static int qnx4_readdir(struct file *file, struct dir_context *ctx)
 {
 	struct inode *inode = file_inode(file);
 	unsigned int offset;
 	struct buffer_head *bh;
-	struct qnx4_inode_entry *de;
-	struct qnx4_link_info *le;
 	unsigned long blknum;
 	int ix, ino;
 	int size;
@@ -38,27 +52,30 @@ static int qnx4_readdir(struct file *file, struct dir_context *ctx)
 		}
 		ix = (ctx->pos >> QNX4_DIR_ENTRY_SIZE_BITS) % QNX4_INODES_PER_BLOCK;
 		for (; ix < QNX4_INODES_PER_BLOCK; ix++, ctx->pos += QNX4_DIR_ENTRY_SIZE) {
+			union qnx4_directory_entry *de;
+			const char *name;
+
 			offset = ix * QNX4_DIR_ENTRY_SIZE;
-			de = (struct qnx4_inode_entry *) (bh->b_data + offset);
-			if (!de->di_fname[0])
+			de = (union qnx4_directory_entry *) (bh->b_data + offset);
+
+			if (!de->de_name)
 				continue;
-			if (!(de->di_status & (QNX4_FILE_USED|QNX4_FILE_LINK)))
+			if (!(de->de_status & (QNX4_FILE_USED|QNX4_FILE_LINK)))
 				continue;
-			if (!(de->di_status & QNX4_FILE_LINK))
-				size = QNX4_SHORT_NAME_MAX;
-			else
-				size = QNX4_NAME_MAX;
-			size = strnlen(de->di_fname, size);
-			QNX4DEBUG((KERN_INFO "qnx4_readdir:%.*s\n", size, de->di_fname));
-			if (!(de->di_status & QNX4_FILE_LINK))
+			if (!(de->de_status & QNX4_FILE_LINK)) {
+				size = sizeof(de->inode.di_fname);
+				name = de->inode.di_fname;
 				ino = blknum * QNX4_INODES_PER_BLOCK + ix - 1;
-			else {
-				le  = (struct qnx4_link_info*)de;
-				ino = ( le32_to_cpu(le->dl_inode_blk) - 1 ) *
+			} else {
+				size = sizeof(de->link.dl_fname);
+				name = de->link.dl_fname;
+				ino = ( le32_to_cpu(de->link.dl_inode_blk) - 1 ) *
 					QNX4_INODES_PER_BLOCK +
-					le->dl_inode_ndx;
+					de->link.dl_inode_ndx;
 			}
-			if (!dir_emit(ctx, de->di_fname, size, ino, DT_UNKNOWN)) {
+			size = strnlen(name, size);
+			QNX4DEBUG((KERN_INFO "qnx4_readdir:%.*s\n", size, name));
+			if (!dir_emit(ctx, name, size, ino, DT_UNKNOWN)) {
 				brelse(bh);
 				return 0;
 			}
-- 
2.33.0

[PATCH 5.14 139/162] parisc: Use absolute_pointer() to define PAGE0

[Greg Kroah-Hartman]

From: Helge Deller <deller@gmx.de>

[ Upstream commit 90cc7bed1ed19f869ae7221a6b41887fe762a6a3 ]

Use absolute_pointer() wrapper for PAGE0 to avoid this compiler warning:

  arch/parisc/kernel/setup.c: In function 'start_parisc':
  error: '__builtin_memcmp_eq' specified bound 8 exceeds source size 0

Signed-off-by: Helge Deller <deller@gmx.de>
Co-Developed-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/parisc/include/asm/page.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/parisc/include/asm/page.h b/arch/parisc/include/asm/page.h
index d00313d1274e..0561568f7b48 100644
--- a/arch/parisc/include/asm/page.h
+++ b/arch/parisc/include/asm/page.h
@@ -184,7 +184,7 @@ extern int npmem_ranges;
 #include <asm-generic/getorder.h>
 #include <asm/pdc.h>
 
-#define PAGE0   ((struct zeropage *)__PAGE_OFFSET)
+#define PAGE0   ((struct zeropage *)absolute_pointer(__PAGE_OFFSET))
 
 /* DEFINITION OF THE ZERO-PAGE (PAG0) */
 /* based on work by Jason Eckhardt (jason@equator.com) */
-- 
2.33.0

[PATCH 5.14 140/162] drm/amdkfd: make needs_pcie_atomics FW-version dependent

[Greg Kroah-Hartman]

From: Felix Kuehling <Felix.Kuehling@amd.com>

[ Upstream commit fb932dfeb87411a8a01c995576198bfc302df339 ]

On some GPUs the PCIe atomic requirement for KFD depends on the MEC
firmware version. Add a firmware version check for this. The minimum
firmware version that works without atomics can be updated in the
device_info structure for each GPU type.

Move PCIe atomic detection from kgd2kfd_probe into kgd2kfd_device_init
because the MEC firmware is not loaded yet at the probe stage.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdkfd/kfd_device.c | 44 ++++++++++++++++---------
 drivers/gpu/drm/amd/amdkfd/kfd_priv.h   |  1 +
 2 files changed, 29 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device.c b/drivers/gpu/drm/amd/amdkfd/kfd_device.c
index 9e52948d4992..5a872adcfdb9 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device.c
@@ -447,6 +447,7 @@ static const struct kfd_device_info navi10_device_info = {
 	.needs_iommu_device = false,
 	.supports_cwsr = true,
 	.needs_pci_atomics = true,
+	.no_atomic_fw_version = 145,
 	.num_sdma_engines = 2,
 	.num_xgmi_sdma_engines = 0,
 	.num_sdma_queues_per_engine = 8,
@@ -465,6 +466,7 @@ static const struct kfd_device_info navi12_device_info = {
 	.needs_iommu_device = false,
 	.supports_cwsr = true,
 	.needs_pci_atomics = true,
+	.no_atomic_fw_version = 145,
 	.num_sdma_engines = 2,
 	.num_xgmi_sdma_engines = 0,
 	.num_sdma_queues_per_engine = 8,
@@ -483,6 +485,7 @@ static const struct kfd_device_info navi14_device_info = {
 	.needs_iommu_device = false,
 	.supports_cwsr = true,
 	.needs_pci_atomics = true,
+	.no_atomic_fw_version = 145,
 	.num_sdma_engines = 2,
 	.num_xgmi_sdma_engines = 0,
 	.num_sdma_queues_per_engine = 8,
@@ -501,6 +504,7 @@ static const struct kfd_device_info sienna_cichlid_device_info = {
 	.needs_iommu_device = false,
 	.supports_cwsr = true,
 	.needs_pci_atomics = true,
+	.no_atomic_fw_version = 92,
 	.num_sdma_engines = 4,
 	.num_xgmi_sdma_engines = 0,
 	.num_sdma_queues_per_engine = 8,
@@ -519,6 +523,7 @@ static const struct kfd_device_info navy_flounder_device_info = {
 	.needs_iommu_device = false,
 	.supports_cwsr = true,
 	.needs_pci_atomics = true,
+	.no_atomic_fw_version = 92,
 	.num_sdma_engines = 2,
 	.num_xgmi_sdma_engines = 0,
 	.num_sdma_queues_per_engine = 8,
@@ -536,7 +541,8 @@ static const struct kfd_device_info vangogh_device_info = {
 	.mqd_size_aligned = MQD_SIZE_ALIGNED,
 	.needs_iommu_device = false,
 	.supports_cwsr = true,
-	.needs_pci_atomics = false,
+	.needs_pci_atomics = true,
+	.no_atomic_fw_version = 92,
 	.num_sdma_engines = 1,
 	.num_xgmi_sdma_engines = 0,
 	.num_sdma_queues_per_engine = 2,
@@ -555,6 +561,7 @@ static const struct kfd_device_info dimgrey_cavefish_device_info = {
 	.needs_iommu_device = false,
 	.supports_cwsr = true,
 	.needs_pci_atomics = true,
+	.no_atomic_fw_version = 92,
 	.num_sdma_engines = 2,
 	.num_xgmi_sdma_engines = 0,
 	.num_sdma_queues_per_engine = 8,
@@ -573,6 +580,7 @@ static const struct kfd_device_info beige_goby_device_info = {
 	.needs_iommu_device = false,
 	.supports_cwsr = true,
 	.needs_pci_atomics = true,
+	.no_atomic_fw_version = 92,
 	.num_sdma_engines = 1,
 	.num_xgmi_sdma_engines = 0,
 	.num_sdma_queues_per_engine = 8,
@@ -590,7 +598,8 @@ static const struct kfd_device_info yellow_carp_device_info = {
 	.mqd_size_aligned = MQD_SIZE_ALIGNED,
 	.needs_iommu_device = false,
 	.supports_cwsr = true,
-	.needs_pci_atomics = false,
+	.needs_pci_atomics = true,
+	.no_atomic_fw_version = 92,
 	.num_sdma_engines = 1,
 	.num_xgmi_sdma_engines = 0,
 	.num_sdma_queues_per_engine = 2,
@@ -659,20 +668,6 @@ struct kfd_dev *kgd2kfd_probe(struct kgd_dev *kgd,
 	if (!kfd)
 		return NULL;
 
-	/* Allow BIF to recode atomics to PCIe 3.0 AtomicOps.
-	 * 32 and 64-bit requests are possible and must be
-	 * supported.
-	 */
-	kfd->pci_atomic_requested = amdgpu_amdkfd_have_atomics_support(kgd);
-	if (device_info->needs_pci_atomics &&
-	    !kfd->pci_atomic_requested) {
-		dev_info(kfd_device,
-			 "skipped device %x:%x, PCI rejects atomics\n",
-			 pdev->vendor, pdev->device);
-		kfree(kfd);
-		return NULL;
-	}
-
 	kfd->kgd = kgd;
 	kfd->device_info = device_info;
 	kfd->pdev = pdev;
@@ -772,6 +767,23 @@ bool kgd2kfd_device_init(struct kfd_dev *kfd,
 	kfd->vm_info.vmid_num_kfd = kfd->vm_info.last_vmid_kfd
 			- kfd->vm_info.first_vmid_kfd + 1;
 
+	/* Allow BIF to recode atomics to PCIe 3.0 AtomicOps.
+	 * 32 and 64-bit requests are possible and must be
+	 * supported.
+	 */
+	kfd->pci_atomic_requested = amdgpu_amdkfd_have_atomics_support(kfd->kgd);
+	if (!kfd->pci_atomic_requested &&
+	    kfd->device_info->needs_pci_atomics &&
+	    (!kfd->device_info->no_atomic_fw_version ||
+	     kfd->mec_fw_version < kfd->device_info->no_atomic_fw_version)) {
+		dev_info(kfd_device,
+			 "skipped device %x:%x, PCI rejects atomics %d<%d\n",
+			 kfd->pdev->vendor, kfd->pdev->device,
+			 kfd->mec_fw_version,
+			 kfd->device_info->no_atomic_fw_version);
+		return false;
+	}
+
 	/* Verify module parameters regarding mapped process number*/
 	if ((hws_max_conc_proc < 0)
 			|| (hws_max_conc_proc > kfd->vm_info.vmid_num_kfd)) {
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_priv.h b/drivers/gpu/drm/amd/amdkfd/kfd_priv.h
index 3426743ed228..b38a84a27438 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_priv.h
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_priv.h
@@ -206,6 +206,7 @@ struct kfd_device_info {
 	bool supports_cwsr;
 	bool needs_iommu_device;
 	bool needs_pci_atomics;
+	uint32_t no_atomic_fw_version;
 	unsigned int num_sdma_engines;
 	unsigned int num_xgmi_sdma_engines;
 	unsigned int num_sdma_queues_per_engine;
-- 
2.33.0

[PATCH 5.14 141/162] drm/amd/display: Fix unstable HPCP compliance on Chrome Barcelo

[Greg Kroah-Hartman]

From: Qingqing Zhuo <qingqing.zhuo@amd.com>

[ Upstream commit 4e00a434a08e0654a4dd9347485d9ec85deee1ef ]

[Why]
Intermittently, there presents two occurrences of 0 stream
commits in a single HPD event. Current HDCP sequence does
not consider such scenerio, and will thus disable HDCP.

[How]
Add condition check to include stream remove and re-enable
case for HDCP enable.

Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 22 +++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index a4a4bb43c108..e7cf79b386da 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -8051,8 +8051,26 @@ static bool is_content_protection_different(struct drm_connector_state *state,
 	    state->content_protection == DRM_MODE_CONTENT_PROTECTION_ENABLED)
 		state->content_protection = DRM_MODE_CONTENT_PROTECTION_DESIRED;
 
-	/* Check if something is connected/enabled, otherwise we start hdcp but nothing is connected/enabled
-	 * hot-plug, headless s3, dpms
+	/* Stream removed and re-enabled
+	 *
+	 * Can sometimes overlap with the HPD case,
+	 * thus set update_hdcp to false to avoid
+	 * setting HDCP multiple times.
+	 *
+	 * Handles:	DESIRED -> DESIRED (Special case)
+	 */
+	if (!(old_state->crtc && old_state->crtc->enabled) &&
+		state->crtc && state->crtc->enabled &&
+		connector->state->content_protection == DRM_MODE_CONTENT_PROTECTION_DESIRED) {
+		dm_con_state->update_hdcp = false;
+		return true;
+	}
+
+	/* Hot-plug, headless s3, dpms
+	 *
+	 * Only start HDCP if the display is connected/enabled.
+	 * update_hdcp flag will be set to false until the next
+	 * HPD comes in.
 	 *
 	 * Handles:	DESIRED -> DESIRED (Special case)
 	 */
-- 
2.33.0

[PATCH 5.14 142/162] drm/amd/display: Link training retry fix for abort case

[Greg Kroah-Hartman]

From: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>

[ Upstream commit 71ae30997a8f1791835167d3ceb8d1fab32407db ]

[Why]
If link training is aborted, it shall be retried if sink is present.

[How]
Check hpd status to find out whether sink is present or not. If sink is
present, then link training shall be tried again with same settings.
Otherwise, link training shall be aborted.

Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index a6d0fd24fd02..83ef72a3ebf4 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -1849,9 +1849,13 @@ bool perform_link_training_with_retries(
 		dp_disable_link_phy(link, signal);
 
 		/* Abort link training if failure due to sink being unplugged. */
-		if (status == LINK_TRAINING_ABORT)
-			break;
-		else if (do_fallback) {
+		if (status == LINK_TRAINING_ABORT) {
+			enum dc_connection_type type = dc_connection_none;
+
+			dc_link_detect_sink(link, &type);
+			if (type == dc_connection_none)
+				break;
+		} else if (do_fallback) {
 			decide_fallback_link_setting(*link_setting, &current_setting, status);
 			/* Fail link training if reduced link bandwidth no longer meets
 			 * stream requirements.
-- 
2.33.0

[PATCH 5.14 143/162] amd/display: enable panel orientation quirks

[Greg Kroah-Hartman]

From: Simon Ser <contact@emersion.fr>

[ Upstream commit cd51a57eb59fd56f3fe7ce9cadef444451bcf804 ]

This patch allows panel orientation quirks from DRM core to be
used. They attach a DRM connector property "panel orientation"
which indicates in which direction the panel has been mounted.
Some machines have the internal screen mounted with a rotation.

Since the panel orientation quirks need the native mode from the
EDID, check for it in amdgpu_dm_connector_ddc_get_modes.

Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 28 +++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index e7cf79b386da..3bb567ea2cef 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -7514,6 +7514,32 @@ static void amdgpu_dm_connector_add_common_modes(struct drm_encoder *encoder,
 	}
 }
 
+static void amdgpu_set_panel_orientation(struct drm_connector *connector)
+{
+	struct drm_encoder *encoder;
+	struct amdgpu_encoder *amdgpu_encoder;
+	const struct drm_display_mode *native_mode;
+
+	if (connector->connector_type != DRM_MODE_CONNECTOR_eDP &&
+	    connector->connector_type != DRM_MODE_CONNECTOR_LVDS)
+		return;
+
+	encoder = amdgpu_dm_connector_to_encoder(connector);
+	if (!encoder)
+		return;
+
+	amdgpu_encoder = to_amdgpu_encoder(encoder);
+
+	native_mode = &amdgpu_encoder->native_mode;
+	if (native_mode->hdisplay == 0 || native_mode->vdisplay == 0)
+		return;
+
+	drm_connector_set_panel_orientation_with_quirk(connector,
+						       DRM_MODE_PANEL_ORIENTATION_UNKNOWN,
+						       native_mode->hdisplay,
+						       native_mode->vdisplay);
+}
+
 static void amdgpu_dm_connector_ddc_get_modes(struct drm_connector *connector,
 					      struct edid *edid)
 {
@@ -7542,6 +7568,8 @@ static void amdgpu_dm_connector_ddc_get_modes(struct drm_connector *connector,
 		 * restored here.
 		 */
 		amdgpu_dm_update_freesync_caps(connector, edid);
+
+		amdgpu_set_panel_orientation(connector);
 	} else {
 		amdgpu_dm_connector->num_modes = 0;
 	}
-- 
2.33.0

[PATCH 5.14 144/162] arm64: Mark __stack_chk_guard as __ro_after_init

[Greg Kroah-Hartman]

From: Dan Li <ashimida@linux.alibaba.com>

[ Upstream commit 9fcb2e93f41c07a400885325e7dbdfceba6efaec ]

__stack_chk_guard is setup once while init stage and never changed
after that.

Although the modification of this variable at runtime will usually
cause the kernel to crash (so does the attacker), it should be marked
as __ro_after_init, and it should not affect performance if it is
placed in the ro_after_init section.

Signed-off-by: Dan Li <ashimida@linux.alibaba.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1631612642-102881-1-git-send-email-ashimida@linux.alibaba.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/process.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index c8989b999250..c858b857c1ec 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -60,7 +60,7 @@
 
 #if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_STACKPROTECTOR_PER_TASK)
 #include <linux/stackprotector.h>
-unsigned long __stack_chk_guard __read_mostly;
+unsigned long __stack_chk_guard __ro_after_init;
 EXPORT_SYMBOL(__stack_chk_guard);
 #endif
 
-- 
2.33.0

[PATCH 5.14 145/162] alpha: Declare virt_to_phys and virt_to_bus parameter as pointer to volatile

[Greg Kroah-Hartman]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit 35a3f4ef0ab543daa1725b0c963eb8c05e3376f8 ]

Some drivers pass a pointer to volatile data to virt_to_bus() and
virt_to_phys(), and that works fine.  One exception is alpha.  This
results in a number of compile errors such as

  drivers/net/wan/lmc/lmc_main.c: In function 'lmc_softreset':
  drivers/net/wan/lmc/lmc_main.c:1782:50: error:
	passing argument 1 of 'virt_to_bus' discards 'volatile'
	qualifier from pointer target type

  drivers/atm/ambassador.c: In function 'do_loader_command':
  drivers/atm/ambassador.c:1747:58: error:
	passing argument 1 of 'virt_to_bus' discards 'volatile'
	qualifier from pointer target type

Declare the parameter of virt_to_phys and virt_to_bus as pointer to
volatile to fix the problem.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/alpha/include/asm/io.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/alpha/include/asm/io.h b/arch/alpha/include/asm/io.h
index 0fab5ac90775..c9cb554fbe54 100644
--- a/arch/alpha/include/asm/io.h
+++ b/arch/alpha/include/asm/io.h
@@ -60,7 +60,7 @@ extern inline void set_hae(unsigned long new_hae)
  * Change virtual addresses to physical addresses and vv.
  */
 #ifdef USE_48_BIT_KSEG
-static inline unsigned long virt_to_phys(void *address)
+static inline unsigned long virt_to_phys(volatile void *address)
 {
 	return (unsigned long)address - IDENT_ADDR;
 }
@@ -70,7 +70,7 @@ static inline void * phys_to_virt(unsigned long address)
 	return (void *) (address + IDENT_ADDR);
 }
 #else
-static inline unsigned long virt_to_phys(void *address)
+static inline unsigned long virt_to_phys(volatile void *address)
 {
         unsigned long phys = (unsigned long)address;
 
@@ -106,7 +106,7 @@ static inline void * phys_to_virt(unsigned long address)
 extern unsigned long __direct_map_base;
 extern unsigned long __direct_map_size;
 
-static inline unsigned long __deprecated virt_to_bus(void *address)
+static inline unsigned long __deprecated virt_to_bus(volatile void *address)
 {
 	unsigned long phys = virt_to_phys(address);
 	unsigned long bus = phys + __direct_map_base;
-- 
2.33.0

[PATCH 5.14 146/162] net: 6pack: Fix tx timeout and slot time

[Greg Kroah-Hartman]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit 3c0d2a46c0141913dc6fd126c57d0615677d946e ]

tx timeout and slot time are currently specified in units of HZ.  On
Alpha, HZ is defined as 1024.  When building alpha:allmodconfig, this
results in the following error message.

  drivers/net/hamradio/6pack.c: In function 'sixpack_open':
  drivers/net/hamradio/6pack.c:71:41: error:
  	unsigned conversion from 'int' to 'unsigned char'
  	changes value from '256' to '0'

In the 6PACK protocol, tx timeout is specified in units of 10 ms and
transmitted over the wire:

    https://www.linux-ax25.org/wiki/6PACK

Defining a value dependent on HZ doesn't really make sense, and
presumably comes from the (very historical) situation where HZ was
originally 100.

Note that the SIXP_SLOTTIME use explicitly is about 10ms granularity:

        mod_timer(&sp->tx_t, jiffies + ((when + 1) * HZ) / 100);

and the SIXP_TXDELAY walue is sent as a byte over the wire.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/hamradio/6pack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c
index 8fe8887d506a..6192244b304a 100644
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -68,9 +68,9 @@
 #define SIXP_DAMA_OFF		0
 
 /* default level 2 parameters */
-#define SIXP_TXDELAY			(HZ/4)	/* in 1 s */
+#define SIXP_TXDELAY			25	/* 250 ms */
 #define SIXP_PERSIST			50	/* in 256ths */
-#define SIXP_SLOTTIME			(HZ/10)	/* in 1 s */
+#define SIXP_SLOTTIME			10	/* 100 ms */
 #define SIXP_INIT_RESYNC_TIMEOUT	(3*HZ/2) /* in 1 s */
 #define SIXP_RESYNC_TIMEOUT		5*HZ	/* in 1 s */
 
-- 
2.33.0

[PATCH 5.14 147/162] spi: Fix tegra20 build with CONFIG_PM=n

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

[ Upstream commit efafec27c5658ed987e720130772f8933c685e87 ]

Without CONFIG_PM enabled, the SET_RUNTIME_PM_OPS() macro ends up being
empty, and the only use of tegra_slink_runtime_{resume,suspend} goes
away, resulting in

  drivers/spi/spi-tegra20-slink.c:1200:12: error: ‘tegra_slink_runtime_resume’ defined but not used [-Werror=unused-function]
   1200 | static int tegra_slink_runtime_resume(struct device *dev)
        |            ^~~~~~~~~~~~~~~~~~~~~~~~~~
  drivers/spi/spi-tegra20-slink.c:1188:12: error: ‘tegra_slink_runtime_suspend’ defined but not used [-Werror=unused-function]
   1188 | static int tegra_slink_runtime_suspend(struct device *dev)
        |            ^~~~~~~~~~~~~~~~~~~~~~~~~~~

mark the functions __maybe_unused to make the build happy.

This hits the alpha allmodconfig build (and others).

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-tegra20-slink.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c
index 6a726c95ac7a..dc1a6899ba3b 100644
--- a/drivers/spi/spi-tegra20-slink.c
+++ b/drivers/spi/spi-tegra20-slink.c
@@ -1206,7 +1206,7 @@ static int tegra_slink_resume(struct device *dev)
 }
 #endif
 
-static int tegra_slink_runtime_suspend(struct device *dev)
+static int __maybe_unused tegra_slink_runtime_suspend(struct device *dev)
 {
 	struct spi_master *master = dev_get_drvdata(dev);
 	struct tegra_slink_data *tspi = spi_master_get_devdata(master);
@@ -1218,7 +1218,7 @@ static int tegra_slink_runtime_suspend(struct device *dev)
 	return 0;
 }
 
-static int tegra_slink_runtime_resume(struct device *dev)
+static int __maybe_unused tegra_slink_runtime_resume(struct device *dev)
 {
 	struct spi_master *master = dev_get_drvdata(dev);
 	struct tegra_slink_data *tspi = spi_master_get_devdata(master);
-- 
2.33.0

[PATCH 5.14 148/162] libperf evsel: Make use of FD robust.

[Greg Kroah-Hartman]

From: Ian Rogers <irogers@google.com>

[ Upstream commit aba5daeb645181ee5a046bc00c231fd045882aaa ]

FD uses xyarray__entry that may return NULL if an index is out of
bounds. If NULL is returned then a segv happens as FD unconditionally
dereferences the pointer. This was happening in a case of with perf
iostat as shown below. The fix is to make FD an "int*" rather than an
int and handle the NULL case as either invalid input or a closed fd.

  $ sudo gdb --args perf stat --iostat  list
  ...
  Breakpoint 1, perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50
  50      {
  (gdb) bt
   #0  perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50
   #1  0x000055555585c188 in evsel__open_cpu (evsel=0x5555560951a0, cpus=0x555556093410,
      threads=0x555556086fb0, start_cpu=0, end_cpu=1) at util/evsel.c:1792
   #2  0x000055555585cfb2 in evsel__open (evsel=0x5555560951a0, cpus=0x0, threads=0x555556086fb0)
      at util/evsel.c:2045
   #3  0x000055555585d0db in evsel__open_per_thread (evsel=0x5555560951a0, threads=0x555556086fb0)
      at util/evsel.c:2065
   #4  0x00005555558ece64 in create_perf_stat_counter (evsel=0x5555560951a0,
      config=0x555555c34700 <stat_config>, target=0x555555c2f1c0 <target>, cpu=0) at util/stat.c:590
   #5  0x000055555578e927 in __run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0)
      at builtin-stat.c:833
   #6  0x000055555578f3c6 in run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0)
      at builtin-stat.c:1048
   #7  0x0000555555792ee5 in cmd_stat (argc=1, argv=0x7fffffffe4a0) at builtin-stat.c:2534
   #8  0x0000555555835ed3 in run_builtin (p=0x555555c3f540 <commands+288>, argc=3,
      argv=0x7fffffffe4a0) at perf.c:313
   #9  0x0000555555836154 in handle_internal_command (argc=3, argv=0x7fffffffe4a0) at perf.c:365
   #10 0x000055555583629f in run_argv (argcp=0x7fffffffe2ec, argv=0x7fffffffe2e0) at perf.c:409
   #11 0x0000555555836692 in main (argc=3, argv=0x7fffffffe4a0) at perf.c:539
  ...
  (gdb) c
  Continuing.
  Error:
  The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (uncore_iio_0/event=0x83,umask=0x04,ch_mask=0xF,fc_mask=0x07/).
  /bin/dmesg | grep -i perf may provide additional information.

  Program received signal SIGSEGV, Segmentation fault.
  0x00005555559b03ea in perf_evsel__close_fd_cpu (evsel=0x5555560951a0, cpu=1) at evsel.c:166
  166                     if (FD(evsel, cpu, thread) >= 0)

v3. fixes a bug in perf_evsel__run_ioctl where the sense of a branch was
    backward.

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210918054440.2350466-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/perf/evsel.c | 64 +++++++++++++++++++++++++++---------------
 1 file changed, 41 insertions(+), 23 deletions(-)

diff --git a/tools/lib/perf/evsel.c b/tools/lib/perf/evsel.c
index d8886720e83d..8441e3e1aaac 100644
--- a/tools/lib/perf/evsel.c
+++ b/tools/lib/perf/evsel.c
@@ -43,7 +43,7 @@ void perf_evsel__delete(struct perf_evsel *evsel)
 	free(evsel);
 }
 
-#define FD(e, x, y) (*(int *) xyarray__entry(e->fd, x, y))
+#define FD(e, x, y) ((int *) xyarray__entry(e->fd, x, y))
 #define MMAP(e, x, y) (e->mmap ? ((struct perf_mmap *) xyarray__entry(e->mmap, x, y)) : NULL)
 
 int perf_evsel__alloc_fd(struct perf_evsel *evsel, int ncpus, int nthreads)
@@ -54,7 +54,10 @@ int perf_evsel__alloc_fd(struct perf_evsel *evsel, int ncpus, int nthreads)
 		int cpu, thread;
 		for (cpu = 0; cpu < ncpus; cpu++) {
 			for (thread = 0; thread < nthreads; thread++) {
-				FD(evsel, cpu, thread) = -1;
+				int *fd = FD(evsel, cpu, thread);
+
+				if (fd)
+					*fd = -1;
 			}
 		}
 	}
@@ -80,7 +83,7 @@ sys_perf_event_open(struct perf_event_attr *attr,
 static int get_group_fd(struct perf_evsel *evsel, int cpu, int thread, int *group_fd)
 {
 	struct perf_evsel *leader = evsel->leader;
-	int fd;
+	int *fd;
 
 	if (evsel == leader) {
 		*group_fd = -1;
@@ -95,10 +98,10 @@ static int get_group_fd(struct perf_evsel *evsel, int cpu, int thread, int *grou
 		return -ENOTCONN;
 
 	fd = FD(leader, cpu, thread);
-	if (fd == -1)
+	if (fd == NULL || *fd == -1)
 		return -EBADF;
 
-	*group_fd = fd;
+	*group_fd = *fd;
 
 	return 0;
 }
@@ -138,7 +141,11 @@ int perf_evsel__open(struct perf_evsel *evsel, struct perf_cpu_map *cpus,
 
 	for (cpu = 0; cpu < cpus->nr; cpu++) {
 		for (thread = 0; thread < threads->nr; thread++) {
-			int fd, group_fd;
+			int fd, group_fd, *evsel_fd;
+
+			evsel_fd = FD(evsel, cpu, thread);
+			if (evsel_fd == NULL)
+				return -EINVAL;
 
 			err = get_group_fd(evsel, cpu, thread, &group_fd);
 			if (err < 0)
@@ -151,7 +158,7 @@ int perf_evsel__open(struct perf_evsel *evsel, struct perf_cpu_map *cpus,
 			if (fd < 0)
 				return -errno;
 
-			FD(evsel, cpu, thread) = fd;
+			*evsel_fd = fd;
 		}
 	}
 
@@ -163,9 +170,12 @@ static void perf_evsel__close_fd_cpu(struct perf_evsel *evsel, int cpu)
 	int thread;
 
 	for (thread = 0; thread < xyarray__max_y(evsel->fd); ++thread) {
-		if (FD(evsel, cpu, thread) >= 0)
-			close(FD(evsel, cpu, thread));
-		FD(evsel, cpu, thread) = -1;
+		int *fd = FD(evsel, cpu, thread);
+
+		if (fd && *fd >= 0) {
+			close(*fd);
+			*fd = -1;
+		}
 	}
 }
 
@@ -209,13 +219,12 @@ void perf_evsel__munmap(struct perf_evsel *evsel)
 
 	for (cpu = 0; cpu < xyarray__max_x(evsel->fd); cpu++) {
 		for (thread = 0; thread < xyarray__max_y(evsel->fd); thread++) {
-			int fd = FD(evsel, cpu, thread);
-			struct perf_mmap *map = MMAP(evsel, cpu, thread);
+			int *fd = FD(evsel, cpu, thread);
 
-			if (fd < 0)
+			if (fd == NULL || *fd < 0)
 				continue;
 
-			perf_mmap__munmap(map);
+			perf_mmap__munmap(MMAP(evsel, cpu, thread));
 		}
 	}
 
@@ -239,15 +248,16 @@ int perf_evsel__mmap(struct perf_evsel *evsel, int pages)
 
 	for (cpu = 0; cpu < xyarray__max_x(evsel->fd); cpu++) {
 		for (thread = 0; thread < xyarray__max_y(evsel->fd); thread++) {
-			int fd = FD(evsel, cpu, thread);
-			struct perf_mmap *map = MMAP(evsel, cpu, thread);
+			int *fd = FD(evsel, cpu, thread);
+			struct perf_mmap *map;
 
-			if (fd < 0)
+			if (fd == NULL || *fd < 0)
 				continue;
 
+			map = MMAP(evsel, cpu, thread);
 			perf_mmap__init(map, NULL, false, NULL);
 
-			ret = perf_mmap__mmap(map, &mp, fd, cpu);
+			ret = perf_mmap__mmap(map, &mp, *fd, cpu);
 			if (ret) {
 				perf_evsel__munmap(evsel);
 				return ret;
@@ -260,7 +270,9 @@ int perf_evsel__mmap(struct perf_evsel *evsel, int pages)
 
 void *perf_evsel__mmap_base(struct perf_evsel *evsel, int cpu, int thread)
 {
-	if (FD(evsel, cpu, thread) < 0 || MMAP(evsel, cpu, thread) == NULL)
+	int *fd = FD(evsel, cpu, thread);
+
+	if (fd == NULL || *fd < 0 || MMAP(evsel, cpu, thread) == NULL)
 		return NULL;
 
 	return MMAP(evsel, cpu, thread)->base;
@@ -295,17 +307,18 @@ int perf_evsel__read(struct perf_evsel *evsel, int cpu, int thread,
 		     struct perf_counts_values *count)
 {
 	size_t size = perf_evsel__read_size(evsel);
+	int *fd = FD(evsel, cpu, thread);
 
 	memset(count, 0, sizeof(*count));
 
-	if (FD(evsel, cpu, thread) < 0)
+	if (fd == NULL || *fd < 0)
 		return -EINVAL;
 
 	if (MMAP(evsel, cpu, thread) &&
 	    !perf_mmap__read_self(MMAP(evsel, cpu, thread), count))
 		return 0;
 
-	if (readn(FD(evsel, cpu, thread), count->values, size) <= 0)
+	if (readn(*fd, count->values, size) <= 0)
 		return -errno;
 
 	return 0;
@@ -318,8 +331,13 @@ static int perf_evsel__run_ioctl(struct perf_evsel *evsel,
 	int thread;
 
 	for (thread = 0; thread < xyarray__max_y(evsel->fd); thread++) {
-		int fd = FD(evsel, cpu, thread),
-		    err = ioctl(fd, ioc, arg);
+		int err;
+		int *fd = FD(evsel, cpu, thread);
+
+		if (fd == NULL || *fd < 0)
+			return -1;
+
+		err = ioctl(*fd, ioc, arg);
 
 		if (err)
 			return err;
-- 
2.33.0

[PATCH 5.14 149/162] Revert drm/vc4 hdmi runtime PM changes

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

[ Upstream commit b1044a9b8100a0cc5c9d2e1e2f9ca4bb8e32b23a ]

This reverts commits

  9984d6664ce9 ("drm/vc4: hdmi: Make sure the controller is powered in detect")
  411efa18e4b0 ("drm/vc4: hdmi: Move the HSM clock enable to runtime_pm")

as Michael Stapelberg reports that the new runtime PM changes cause his
Raspberry Pi 3 to hang on boot, probably due to interactions with other
changes in the DRM tree (because a bisect points to the merge in commit
e058a84bfddc: "Merge tag 'drm-next-2021-07-01' of git://.../drm").

Revert these two commits until it's been resolved.

Link: https://lore.kernel.org/all/871r5mp7h2.fsf@midna.i-did-not-set--mail-host-address--so-tickle-me/
Reported-and-tested-by: Michael Stapelberg <michael@stapelberg.ch>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 44 ++++++++--------------------------
 1 file changed, 10 insertions(+), 34 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index f91d37beb113..3b391dee3044 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -166,8 +166,6 @@ vc4_hdmi_connector_detect(struct drm_connector *connector, bool force)
 	struct vc4_hdmi *vc4_hdmi = connector_to_vc4_hdmi(connector);
 	bool connected = false;
 
-	WARN_ON(pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev));
-
 	if (vc4_hdmi->hpd_gpio &&
 	    gpiod_get_value_cansleep(vc4_hdmi->hpd_gpio)) {
 		connected = true;
@@ -188,12 +186,10 @@ vc4_hdmi_connector_detect(struct drm_connector *connector, bool force)
 			}
 		}
 
-		pm_runtime_put(&vc4_hdmi->pdev->dev);
 		return connector_status_connected;
 	}
 
 	cec_phys_addr_invalidate(vc4_hdmi->cec_adap);
-	pm_runtime_put(&vc4_hdmi->pdev->dev);
 	return connector_status_disconnected;
 }
 
@@ -635,6 +631,7 @@ static void vc4_hdmi_encoder_post_crtc_powerdown(struct drm_encoder *encoder,
 		vc4_hdmi->variant->phy_disable(vc4_hdmi);
 
 	clk_disable_unprepare(vc4_hdmi->pixel_bvb_clock);
+	clk_disable_unprepare(vc4_hdmi->hsm_clock);
 	clk_disable_unprepare(vc4_hdmi->pixel_clock);
 
 	ret = pm_runtime_put(&vc4_hdmi->pdev->dev);
@@ -945,6 +942,13 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
 		return;
 	}
 
+	ret = clk_prepare_enable(vc4_hdmi->hsm_clock);
+	if (ret) {
+		DRM_ERROR("Failed to turn on HSM clock: %d\n", ret);
+		clk_disable_unprepare(vc4_hdmi->pixel_clock);
+		return;
+	}
+
 	vc4_hdmi_cec_update_clk_div(vc4_hdmi);
 
 	if (pixel_rate > 297000000)
@@ -957,6 +961,7 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
 	ret = clk_set_min_rate(vc4_hdmi->pixel_bvb_clock, bvb_rate);
 	if (ret) {
 		DRM_ERROR("Failed to set pixel bvb clock rate: %d\n", ret);
+		clk_disable_unprepare(vc4_hdmi->hsm_clock);
 		clk_disable_unprepare(vc4_hdmi->pixel_clock);
 		return;
 	}
@@ -964,6 +969,7 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
 	ret = clk_prepare_enable(vc4_hdmi->pixel_bvb_clock);
 	if (ret) {
 		DRM_ERROR("Failed to turn on pixel bvb clock: %d\n", ret);
+		clk_disable_unprepare(vc4_hdmi->hsm_clock);
 		clk_disable_unprepare(vc4_hdmi->pixel_clock);
 		return;
 	}
@@ -2110,29 +2116,6 @@ static int vc5_hdmi_init_resources(struct vc4_hdmi *vc4_hdmi)
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int vc4_hdmi_runtime_suspend(struct device *dev)
-{
-	struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
-
-	clk_disable_unprepare(vc4_hdmi->hsm_clock);
-
-	return 0;
-}
-
-static int vc4_hdmi_runtime_resume(struct device *dev)
-{
-	struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
-	int ret;
-
-	ret = clk_prepare_enable(vc4_hdmi->hsm_clock);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-#endif
-
 static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
 {
 	const struct vc4_hdmi_variant *variant = of_device_get_match_data(dev);
@@ -2380,18 +2363,11 @@ static const struct of_device_id vc4_hdmi_dt_match[] = {
 	{}
 };
 
-static const struct dev_pm_ops vc4_hdmi_pm_ops = {
-	SET_RUNTIME_PM_OPS(vc4_hdmi_runtime_suspend,
-			   vc4_hdmi_runtime_resume,
-			   NULL)
-};
-
 struct platform_driver vc4_hdmi_driver = {
 	.probe = vc4_hdmi_dev_probe,
 	.remove = vc4_hdmi_dev_remove,
 	.driver = {
 		.name = "vc4_hdmi",
 		.of_match_table = vc4_hdmi_dt_match,
-		.pm = &vc4_hdmi_pm_ops,
 	},
 };
-- 
2.33.0

[PATCH 5.14 150/162] EDAC/synopsys: Fix wrong value type assignment for edac_mode

[Greg Kroah-Hartman]

From: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>

commit 5297cfa6bdf93e3889f78f9b482e2a595a376083 upstream.

dimm->edac_mode contains values of type enum edac_type - not the
corresponding capability flags. Fix that.

Issue caught by Coverity check "enumerated type mixed with another
type."

 [ bp: Rewrite commit message, add tags. ]

Fixes: ae9b56e3996d ("EDAC, synps: Add EDAC support for zynq ddr ecc controller")
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20210818072315.15149-1-shubhrajyoti.datta@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/edac/synopsys_edac.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -782,7 +782,7 @@ static void init_csrows(struct mem_ctl_i
 
 		for (j = 0; j < csi->nr_channels; j++) {
 			dimm		= csi->channels[j]->dimm;
-			dimm->edac_mode	= EDAC_FLAG_SECDED;
+			dimm->edac_mode	= EDAC_SECDED;
 			dimm->mtype	= p_data->get_mtype(priv->baseaddr);
 			dimm->nr_pages	= (size >> PAGE_SHIFT) / csi->nr_channels;
 			dimm->grain	= SYNPS_EDAC_ERR_GRAIN;

[PATCH 5.14 151/162] EDAC/dmc520: Assign the proper type to dimm->edac_mode

[Greg Kroah-Hartman]

From: Borislav Petkov <bp@suse.de>

commit 54607282fae6148641a08d81a6e0953b541249c7 upstream.

dimm->edac_mode contains values of type enum edac_type - not the
corresponding capability flags. Fix that.

Fixes: 1088750d7839 ("EDAC: Add EDAC driver for DMC520")
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20210916085258.7544-1-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/edac/dmc520_edac.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/edac/dmc520_edac.c
+++ b/drivers/edac/dmc520_edac.c
@@ -464,7 +464,7 @@ static void dmc520_init_csrow(struct mem
 			dimm->grain	= pvt->mem_width_in_bytes;
 			dimm->dtype	= dt;
 			dimm->mtype	= mt;
-			dimm->edac_mode	= EDAC_FLAG_SECDED;
+			dimm->edac_mode	= EDAC_SECDED;
 			dimm->nr_pages	= pages_per_rank / csi->nr_channels;
 		}
 	}

[PATCH 5.14 152/162] x86/setup: Call early_reserve_memory() earlier

[Greg Kroah-Hartman]

From: Juergen Gross <jgross@suse.com>

commit 8aa83e6395ce047a506f0b16edca45f36c1ae7f8 upstream.

Commit in Fixes introduced early_reserve_memory() to do all needed
initial memblock_reserve() calls in one function. Unfortunately, the call
of early_reserve_memory() is done too late for Xen dom0, as in some
cases a Xen hook called by e820__memory_setup() will need those memory
reservations to have happened already.

Move the call of early_reserve_memory() before the call of
e820__memory_setup() in order to avoid such problems.

Fixes: a799c2bd29d1 ("x86/setup: Consolidate early memory reservations")
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210920120421.29276-1-jgross@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/setup.c |   26 ++++++++++++++------------
 1 file changed, 14 insertions(+), 12 deletions(-)

--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -839,6 +839,20 @@ void __init setup_arch(char **cmdline_p)
 
 	x86_init.oem.arch_setup();
 
+	/*
+	 * Do some memory reservations *before* memory is added to memblock, so
+	 * memblock allocations won't overwrite it.
+	 *
+	 * After this point, everything still needed from the boot loader or
+	 * firmware or kernel text should be early reserved or marked not RAM in
+	 * e820. All other memory is free game.
+	 *
+	 * This call needs to happen before e820__memory_setup() which calls the
+	 * xen_memory_setup() on Xen dom0 which relies on the fact that those
+	 * early reservations have happened already.
+	 */
+	early_reserve_memory();
+
 	iomem_resource.end = (1ULL << boot_cpu_data.x86_phys_bits) - 1;
 	e820__memory_setup();
 	parse_setup_data();
@@ -885,18 +899,6 @@ void __init setup_arch(char **cmdline_p)
 
 	parse_early_param();
 
-	/*
-	 * Do some memory reservations *before* memory is added to
-	 * memblock, so memblock allocations won't overwrite it.
-	 * Do it after early param, so we could get (unlikely) panic from
-	 * serial.
-	 *
-	 * After this point everything still needed from the boot loader or
-	 * firmware or kernel text should be early reserved or marked not
-	 * RAM in e820. All other memory is free game.
-	 */
-	early_reserve_memory();
-
 #ifdef CONFIG_MEMORY_HOTPLUG
 	/*
 	 * Memory used by the kernel cannot be hot-removed because Linux

[PATCH 5.14 153/162] thermal/drivers/int340x: Do not set a wrong tcc offset on resume

[Greg Kroah-Hartman]

From: Antoine Tenart <atenart@kernel.org>

commit 8b4bd256674720709a9d858a219fcac6f2f253b5 upstream.

After upgrading to Linux 5.13.3 I noticed my laptop would shutdown due
to overheat (when it should not). It turned out this was due to commit
fe6a6de6692e ("thermal/drivers/int340x/processor_thermal: Fix tcc setting").

What happens is this drivers uses a global variable to keep track of the
tcc offset (tcc_offset_save) and uses it on resume. The issue is this
variable is initialized to 0, but is only set in
tcc_offset_degree_celsius_store, i.e. when the tcc offset is explicitly
set by userspace. If that does not happen, the resume path will set the
offset to 0 (in my case the h/w default being 3, the offset would become
too low after a suspend/resume cycle).

The issue did not arise before commit fe6a6de6692e, as the function
setting the offset would return if the offset was 0. This is no longer
the case (rightfully).

Fix this by not applying the offset if it wasn't saved before, reverting
back to the old logic. A better approach will come later, but this will
be easier to apply to stable kernels.

The logic to restore the offset after a resume was there long before
commit fe6a6de6692e, but as a value of 0 was considered invalid I'm
referencing the commit that made the issue possible in the Fixes tag
instead.

Fixes: fe6a6de6692e ("thermal/drivers/int340x/processor_thermal: Fix tcc setting")
Cc: stable@vger.kernel.org
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pI andruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20210909085613.5577-2-atenart@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/thermal/intel/int340x_thermal/processor_thermal_device.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
@@ -107,7 +107,7 @@ static int tcc_offset_update(unsigned in
 	return 0;
 }
 
-static unsigned int tcc_offset_save;
+static int tcc_offset_save = -1;
 
 static ssize_t tcc_offset_degree_celsius_store(struct device *dev,
 				struct device_attribute *attr, const char *buf,
@@ -352,7 +352,8 @@ int proc_thermal_resume(struct device *d
 	proc_dev = dev_get_drvdata(dev);
 	proc_thermal_read_ppcc(proc_dev);
 
-	tcc_offset_update(tcc_offset_save);
+	if (tcc_offset_save >= 0)
+		tcc_offset_update(tcc_offset_save);
 
 	return 0;
 }

[PATCH 5.14 154/162] irqchip/armada-370-xp: Fix ack/eoi breakage

[Greg Kroah-Hartman]

From: Marc Zyngier <maz@kernel.org>

commit 2a7313dc81e88adc7bb09d0f056985fa8afc2b89 upstream.

When converting the driver to using handle_percpu_devid_irq,
we forgot to repaint the irq_eoi() callback into irq_ack(),
as handle_percpu_devid_fasteoi_ipi() was actually using EOI
really early in the handling. Yes this was a stupid idea.

Fix this by using the HW ack method as irq_ack().

Fixes: e52e73b7e9f7 ("irqchip/armada-370-xp: Make IPIs use handle_percpu_devid_irq()")
Reported-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87tuiexq5f.fsf@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/irqchip/irq-armada-370-xp.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/irqchip/irq-armada-370-xp.c
+++ b/drivers/irqchip/irq-armada-370-xp.c
@@ -359,16 +359,16 @@ static void armada_370_xp_ipi_send_mask(
 		ARMADA_370_XP_SW_TRIG_INT_OFFS);
 }
 
-static void armada_370_xp_ipi_eoi(struct irq_data *d)
+static void armada_370_xp_ipi_ack(struct irq_data *d)
 {
 	writel(~BIT(d->hwirq), per_cpu_int_base + ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS);
 }
 
 static struct irq_chip ipi_irqchip = {
 	.name		= "IPI",
+	.irq_ack	= armada_370_xp_ipi_ack,
 	.irq_mask	= armada_370_xp_ipi_mask,
 	.irq_unmask	= armada_370_xp_ipi_unmask,
-	.irq_eoi	= armada_370_xp_ipi_eoi,
 	.ipi_send_mask	= armada_370_xp_ipi_send_mask,
 };
 

[PATCH 5.14 155/162] arm64: add MTE supported check to thread switching and syscall entry/exit

[Greg Kroah-Hartman]

From: Peter Collingbourne <pcc@google.com>

commit 8c8a3b5bd960cd88f7655b5251dc28741e11f139 upstream.

This lets us avoid doing unnecessary work on hardware that does not
support MTE, and will allow us to freely use MTE instructions in the
code called by mte_thread_switch().

Since this would mean that we do a redundant check in
mte_check_tfsr_el1(), remove it and add two checks now required in its
callers. This also avoids an unnecessary DSB+ISB sequence on the syscall
exit path for hardware not supporting MTE.

Fixes: 65812c6921cc ("arm64: mte: Enable async tag check fault")
Cc: <stable@vger.kernel.org> # 5.13.x
Signed-off-by: Peter Collingbourne <pcc@google.com>
Link: https://linux-review.googlesource.com/id/I02fd000d1ef2c86c7d2952a7f099b254ec227a5d
Link: https://lore.kernel.org/r/20210915190336.398390-1-pcc@google.com
[catalin.marinas@arm.com: adjust the commit log slightly]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/include/asm/mte.h |    6 ++++++
 arch/arm64/kernel/mte.c      |   10 ++++------
 2 files changed, 10 insertions(+), 6 deletions(-)

--- a/arch/arm64/include/asm/mte.h
+++ b/arch/arm64/include/asm/mte.h
@@ -105,11 +105,17 @@ void mte_check_tfsr_el1(void);
 
 static inline void mte_check_tfsr_entry(void)
 {
+	if (!system_supports_mte())
+		return;
+
 	mte_check_tfsr_el1();
 }
 
 static inline void mte_check_tfsr_exit(void)
 {
+	if (!system_supports_mte())
+		return;
+
 	/*
 	 * The asynchronous faults are sync'ed automatically with
 	 * TFSR_EL1 on kernel entry but for exit an explicit dsb()
--- a/arch/arm64/kernel/mte.c
+++ b/arch/arm64/kernel/mte.c
@@ -173,12 +173,7 @@ bool mte_report_once(void)
 #ifdef CONFIG_KASAN_HW_TAGS
 void mte_check_tfsr_el1(void)
 {
-	u64 tfsr_el1;
-
-	if (!system_supports_mte())
-		return;
-
-	tfsr_el1 = read_sysreg_s(SYS_TFSR_EL1);
+	u64 tfsr_el1 = read_sysreg_s(SYS_TFSR_EL1);
 
 	if (unlikely(tfsr_el1 & SYS_TFSR_EL1_TF1)) {
 		/*
@@ -221,6 +216,9 @@ void mte_thread_init_user(void)
 
 void mte_thread_switch(struct task_struct *next)
 {
+	if (!system_supports_mte())
+		return;
+
 	/*
 	 * Check if an async tag exception occurred at EL1.
 	 *

[PATCH 5.14 156/162] USB: serial: cp210x: fix dropped characters with CP2102

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit c32dfec6c1c36bbbcd5d33e949d99aeb215877ec upstream.

Some CP2102 do not support event-insertion mode but return no error when
attempting to enable it.

This means that any event escape characters in the input stream will not
be escaped by the device and consequently regular data may be
interpreted as escape sequences and be removed from the stream by the
driver.

The reporter's device has batch number DCL00X etched into it and as
discovered by the SHA2017 Badge team, counterfeit devices with that
marking can be detected by sending malformed vendor requests. [1][2]

Tests confirm that the possibly counterfeit CP2102 returns a single byte
in response to a malformed two-byte part-number request, while an
original CP2102 returns two bytes. Assume that every CP2102 that behaves
this way also does not support event-insertion mode (e.g. cannot report
parity errors).

[1] https://mobile.twitter.com/sha2017badge/status/1167902087289532418
[2] https://hackaday.com/2017/08/14/hands-on-with-the-shacamp-2017-badge/#comment-3903376

Reported-by: Malte Di Donato <malte@neo-soft.org>
Tested-by: Malte Di Donato <malte@neo-soft.org>
Fixes: a7207e9835a4 ("USB: serial: cp210x: add support for line-status events")
Cc: stable@vger.kernel.org	# 5.9
Link: https://lore.kernel.org/r/20210922113100.20888-1-johan@kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/cp210x.c |   35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -259,6 +259,7 @@ struct cp210x_serial_private {
 	speed_t			max_speed;
 	bool			use_actual_rate;
 	bool			no_flow_control;
+	bool			no_event_mode;
 };
 
 enum cp210x_event_state {
@@ -1113,12 +1114,16 @@ static void cp210x_change_speed(struct t
 
 static void cp210x_enable_event_mode(struct usb_serial_port *port)
 {
+	struct cp210x_serial_private *priv = usb_get_serial_data(port->serial);
 	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
 	int ret;
 
 	if (port_priv->event_mode)
 		return;
 
+	if (priv->no_event_mode)
+		return;
+
 	port_priv->event_state = ES_DATA;
 	port_priv->event_mode = true;
 
@@ -2098,6 +2103,33 @@ static void cp210x_init_max_speed(struct
 	priv->use_actual_rate = use_actual_rate;
 }
 
+static void cp2102_determine_quirks(struct usb_serial *serial)
+{
+	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+	u8 *buf;
+	int ret;
+
+	buf = kmalloc(2, GFP_KERNEL);
+	if (!buf)
+		return;
+	/*
+	 * Some (possibly counterfeit) CP2102 do not support event-insertion
+	 * mode and respond differently to malformed vendor requests.
+	 * Specifically, they return one instead of two bytes when sent a
+	 * two-byte part-number request.
+	 */
+	ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+			CP210X_VENDOR_SPECIFIC, REQTYPE_DEVICE_TO_HOST,
+			CP210X_GET_PARTNUM, 0, buf, 2, USB_CTRL_GET_TIMEOUT);
+	if (ret == 1) {
+		dev_dbg(&serial->interface->dev,
+				"device does not support event-insertion mode\n");
+		priv->no_event_mode = true;
+	}
+
+	kfree(buf);
+}
+
 static int cp210x_get_fw_version(struct usb_serial *serial, u16 value)
 {
 	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
@@ -2123,6 +2155,9 @@ static void cp210x_determine_quirks(stru
 	int ret;
 
 	switch (priv->partnum) {
+	case CP210X_PARTNUM_CP2102:
+		cp2102_determine_quirks(serial);
+		break;
 	case CP210X_PARTNUM_CP2102N_QFN28:
 	case CP210X_PARTNUM_CP2102N_QFN24:
 	case CP210X_PARTNUM_CP2102N_QFN20:

[PATCH 5.14 157/162] software node: balance refcount for managed software nodes

[Greg Kroah-Hartman]

From: Laurentiu Tudor <laurentiu.tudor@nxp.com>

commit 5aeb05b27f81269a2bf2e15eab9fc0f9a400d3a8 upstream.

software_node_notify(), on KOBJ_REMOVE drops the refcount twice on managed
software nodes, thus leading to underflow errors. Balance the refcount by
bumping it in the device_create_managed_software_node() function.

The error [1] was encountered after adding a .shutdown() op to our
fsl-mc-bus driver.

[1]
pc : refcount_warn_saturate+0xf8/0x150
lr : refcount_warn_saturate+0xf8/0x150
sp : ffff80001009b920
x29: ffff80001009b920 x28: ffff1a2420318000 x27: 0000000000000000
x26: ffffccac15e7a038 x25: 0000000000000008 x24: ffffccac168e0030
x23: ffff1a2428a82000 x22: 0000000000080000 x21: ffff1a24287b5000
x20: 0000000000000001 x19: ffff1a24261f4400 x18: ffffffffffffffff
x17: 6f72645f726f7272 x16: 0000000000000000 x15: ffff80009009b607
x14: 0000000000000000 x13: ffffccac16602670 x12: 0000000000000a17
x11: 000000000000035d x10: ffffccac16602670 x9 : ffffccac16602670
x8 : 00000000ffffefff x7 : ffffccac1665a670 x6 : ffffccac1665a670
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000ffffffff
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff1a2420318000
Call trace:
 refcount_warn_saturate+0xf8/0x150
 kobject_put+0x10c/0x120
 software_node_notify+0xd8/0x140
 device_platform_notify+0x4c/0xb4
 device_del+0x188/0x424
 fsl_mc_device_remove+0x2c/0x4c
 rebofind sp.c__fsl_mc_device_remove+0x14/0x2c
 device_for_each_child+0x5c/0xac
 dprc_remove+0x9c/0xc0
 fsl_mc_driver_remove+0x28/0x64
 __device_release_driver+0x188/0x22c
 device_release_driver+0x30/0x50
 bus_remove_device+0x128/0x134
 device_del+0x16c/0x424
 fsl_mc_bus_remove+0x8c/0x114
 fsl_mc_bus_shutdown+0x14/0x20
 platform_shutdown+0x28/0x40
 device_shutdown+0x15c/0x330
 __do_sys_reboot+0x218/0x2a0
 __arm64_sys_reboot+0x28/0x34
 invoke_syscall+0x48/0x114
 el0_svc_common+0x40/0xdc
 do_el0_svc+0x2c/0x94
 el0_svc+0x2c/0x54
 el0t_64_sync_handler+0xa8/0x12c
 el0t_64_sync+0x198/0x19c
---[ end trace 32eb1c71c7d86821 ]---

Fixes: 151f6ff78cdf ("software node: Provide replacement for device_add_properties()")
Reported-by: Jon Nettleton <jon@solid-run.com>
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Cc: 5.12+ <stable@vger.kernel.org> # 5.12+
[ rjw: Fix up the software_node_notify() invocation ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/base/swnode.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/base/swnode.c
+++ b/drivers/base/swnode.c
@@ -1113,6 +1113,9 @@ int device_create_managed_software_node(
 	to_swnode(fwnode)->managed = true;
 	set_secondary_fwnode(dev, fwnode);
 
+	if (device_is_registered(dev))
+		software_node_notify(dev, KOBJ_ADD);
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(device_create_managed_software_node);

[PATCH 5.14 158/162] xen/balloon: fix balloon kthread freezing

[Greg Kroah-Hartman]

From: Juergen Gross <jgross@suse.com>

commit 96f5bd03e1be606987644b71899ea56a8d05f825 upstream.

Commit 8480ed9c2bbd56 ("xen/balloon: use a kernel thread instead a
workqueue") switched the Xen balloon driver to use a kernel thread.
Unfortunately the patch omitted to call try_to_freeze() or to use
wait_event_freezable_timeout(), causing a system suspend to fail.

Fixes: 8480ed9c2bbd56 ("xen/balloon: use a kernel thread instead a workqueue")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210920100345.21939-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/xen/balloon.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -522,8 +522,8 @@ static int balloon_thread(void *unused)
 			timeout = 3600 * HZ;
 		credit = current_credit();
 
-		wait_event_interruptible_timeout(balloon_thread_wq,
-				 balloon_thread_cond(state, credit), timeout);
+		wait_event_freezable_timeout(balloon_thread_wq,
+			balloon_thread_cond(state, credit), timeout);
 
 		if (kthread_should_stop())
 			return 0;

[PATCH 5.14 159/162] qnx4: work around gcc false positive warning bug

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

commit d5f6545934c47e97c0b48a645418e877b452a992 upstream.

In commit b7213ffa0e58 ("qnx4: avoid stringop-overread errors") I tried
to teach gcc about how the directory entry structure can be two
different things depending on a status flag.  It made the code clearer,
and it seemed to make gcc happy.

However, Arnd points to a gcc bug, where despite using two different
members of a union, gcc then gets confused, and uses the size of one of
the members to decide if a string overrun happens.  And not necessarily
the rigth one.

End result: with some configurations, gcc-11 will still complain about
the source buffer size being overread:

  fs/qnx4/dir.c: In function 'qnx4_readdir':
  fs/qnx4/dir.c:76:32: error: 'strnlen' specified bound [16, 48] exceeds source size 1 [-Werror=stringop-overread]
     76 |                         size = strnlen(name, size);
        |                                ^~~~~~~~~~~~~~~~~~~
  fs/qnx4/dir.c:26:22: note: source object declared here
     26 |                 char de_name;
        |                      ^~~~~~~

because gcc will get confused about which union member entry is actually
getting accessed, even when the source code is very clear about it.  Gcc
internally will have combined two "redundant" pointers (pointing to
different union elements that are at the same offset), and takes the
size checking from one or the other - not necessarily the right one.

This is clearly a gcc bug, but we can work around it fairly easily.  The
biggest thing here is the big honking comment about why we do what we
do.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578#c6
Reported-and-tested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/qnx4/dir.c |   36 +++++++++++++++++++++++++++---------
 1 file changed, 27 insertions(+), 9 deletions(-)

--- a/fs/qnx4/dir.c
+++ b/fs/qnx4/dir.c
@@ -20,12 +20,33 @@
  * depending on the status field in the last byte. The
  * first byte is where the name start either way, and a
  * zero means it's empty.
+ *
+ * Also, due to a bug in gcc, we don't want to use the
+ * real (differently sized) name arrays in the inode and
+ * link entries, but always the 'de_name[]' one in the
+ * fake struct entry.
+ *
+ * See
+ *
+ *   https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578#c6
+ *
+ * for details, but basically gcc will take the size of the
+ * 'name' array from one of the used union entries randomly.
+ *
+ * This use of 'de_name[]' (48 bytes) avoids the false positive
+ * warnings that would happen if gcc decides to use 'inode.di_name'
+ * (16 bytes) even when the pointer and size were to come from
+ * 'link.dl_name' (48 bytes).
+ *
+ * In all cases the actual name pointer itself is the same, it's
+ * only the gcc internal 'what is the size of this field' logic
+ * that can get confused.
  */
 union qnx4_directory_entry {
 	struct {
-		char de_name;
-		char de_pad[62];
-		char de_status;
+		const char de_name[48];
+		u8 de_pad[15];
+		u8 de_status;
 	};
 	struct qnx4_inode_entry inode;
 	struct qnx4_link_info link;
@@ -53,29 +74,26 @@ static int qnx4_readdir(struct file *fil
 		ix = (ctx->pos >> QNX4_DIR_ENTRY_SIZE_BITS) % QNX4_INODES_PER_BLOCK;
 		for (; ix < QNX4_INODES_PER_BLOCK; ix++, ctx->pos += QNX4_DIR_ENTRY_SIZE) {
 			union qnx4_directory_entry *de;
-			const char *name;
 
 			offset = ix * QNX4_DIR_ENTRY_SIZE;
 			de = (union qnx4_directory_entry *) (bh->b_data + offset);
 
-			if (!de->de_name)
+			if (!de->de_name[0])
 				continue;
 			if (!(de->de_status & (QNX4_FILE_USED|QNX4_FILE_LINK)))
 				continue;
 			if (!(de->de_status & QNX4_FILE_LINK)) {
 				size = sizeof(de->inode.di_fname);
-				name = de->inode.di_fname;
 				ino = blknum * QNX4_INODES_PER_BLOCK + ix - 1;
 			} else {
 				size = sizeof(de->link.dl_fname);
-				name = de->link.dl_fname;
 				ino = ( le32_to_cpu(de->link.dl_inode_blk) - 1 ) *
 					QNX4_INODES_PER_BLOCK +
 					de->link.dl_inode_ndx;
 			}
-			size = strnlen(name, size);
+			size = strnlen(de->de_name, size);
 			QNX4DEBUG((KERN_INFO "qnx4_readdir:%.*s\n", size, name));
-			if (!dir_emit(ctx, name, size, ino, DT_UNKNOWN)) {
+			if (!dir_emit(ctx, de->de_name, size, ino, DT_UNKNOWN)) {
 				brelse(bh);
 				return 0;
 			}

[PATCH 5.14 160/162] nvmet: fix a width vs precision bug in nvmet_subsys_attr_serial_show()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 0bd46e22c5ec3dbfb81b60de475151e3f6b411c2 upstream.

This was intended to limit the number of characters printed from
"subsys->serial" to NVMET_SN_MAX_SIZE.  But accidentally the width
specifier was used instead of the precision specifier so it only
affects the alignment and not the number of characters printed.

Fixes: f04064814c2a ("nvmet: fixup buffer overrun in nvmet_subsys_attr_serial()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/nvme/target/configfs.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/nvme/target/configfs.c
+++ b/drivers/nvme/target/configfs.c
@@ -1067,7 +1067,7 @@ static ssize_t nvmet_subsys_attr_serial_
 {
 	struct nvmet_subsys *subsys = to_subsys(item);
 
-	return snprintf(page, PAGE_SIZE, "%*s\n",
+	return snprintf(page, PAGE_SIZE, "%.*s\n",
 			NVMET_SN_MAX_SIZE, subsys->serial);
 }
 

[PATCH 5.14 161/162] usb: gadget: f_uac2: Add missing companion descriptor for feedback EP

[Greg Kroah-Hartman]

From: Jack Pham <jackp@codeaurora.org>

commit 595091a1426a3b2625dad322f69fe569dc9d8943 upstream.

The f_uac2 function fails to enumerate when connected in SuperSpeed
due to the feedback endpoint missing the companion descriptor.
Add a new ss_epin_fback_desc_comp descriptor and append it behind the
ss_epin_fback_desc both in the static definition of the ss_audio_desc
structure as well as its dynamic construction in setup_headers().

Fixes: 24f779dac8f3 ("usb: gadget: f_uac2/u_audio: add feedback endpoint support")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210909174811.12534-2-jackp@codeaurora.org
[jackp: Backport to 5.14 with minor conflict resolution]
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/f_uac2.c |   16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

--- a/drivers/usb/gadget/function/f_uac2.c
+++ b/drivers/usb/gadget/function/f_uac2.c
@@ -348,6 +348,14 @@ static struct usb_endpoint_descriptor ss
 	.bInterval = 4,
 };
 
+static struct usb_ss_ep_comp_descriptor ss_epin_fback_desc_comp = {
+	.bLength		= sizeof(ss_epin_fback_desc_comp),
+	.bDescriptorType	= USB_DT_SS_ENDPOINT_COMP,
+	.bMaxBurst		= 0,
+	.bmAttributes		= 0,
+	.wBytesPerInterval	= cpu_to_le16(4),
+};
+
 
 /* Audio Streaming IN Interface - Alt0 */
 static struct usb_interface_descriptor std_as_in_if0_desc = {
@@ -527,6 +535,7 @@ static struct usb_descriptor_header *ss_
 	(struct usb_descriptor_header *)&ss_epout_desc_comp,
 	(struct usb_descriptor_header *)&as_iso_out_desc,
 	(struct usb_descriptor_header *)&ss_epin_fback_desc,
+	(struct usb_descriptor_header *)&ss_epin_fback_desc_comp,
 
 	(struct usb_descriptor_header *)&std_as_in_if0_desc,
 	(struct usb_descriptor_header *)&std_as_in_if1_desc,
@@ -604,6 +613,7 @@ static void setup_headers(struct f_uac2_
 {
 	struct usb_ss_ep_comp_descriptor *epout_desc_comp = NULL;
 	struct usb_ss_ep_comp_descriptor *epin_desc_comp = NULL;
+	struct usb_ss_ep_comp_descriptor *epin_fback_desc_comp = NULL;
 	struct usb_endpoint_descriptor *epout_desc;
 	struct usb_endpoint_descriptor *epin_desc;
 	struct usb_endpoint_descriptor *epin_fback_desc;
@@ -626,6 +636,7 @@ static void setup_headers(struct f_uac2_
 		epout_desc_comp = &ss_epout_desc_comp;
 		epin_desc_comp = &ss_epin_desc_comp;
 		epin_fback_desc = &ss_epin_fback_desc;
+		epin_fback_desc_comp = &ss_epin_fback_desc_comp;
 	}
 
 	i = 0;
@@ -654,8 +665,11 @@ static void setup_headers(struct f_uac2_
 
 		headers[i++] = USBDHDR(&as_iso_out_desc);
 
-		if (EPOUT_FBACK_IN_EN(opts))
+		if (EPOUT_FBACK_IN_EN(opts)) {
 			headers[i++] = USBDHDR(epin_fback_desc);
+			if (epin_fback_desc_comp)
+				headers[i++] = USBDHDR(epin_fback_desc_comp);
+		}
 	}
 	if (EPIN_EN(opts)) {
 		headers[i++] = USBDHDR(&std_as_in_if0_desc);

[PATCH 5.14 162/162] usb: gadget: f_uac2: Populate SS descriptors wBytesPerInterval

[Greg Kroah-Hartman]

From: Jack Pham <jackp@codeaurora.org>

commit f0e8a206a2a53a919e1709c654cb65d519f7befb upstream.

For Isochronous endpoints, the SS companion descriptor's
wBytesPerInterval field is required to reserve bus time in order
to transmit the required payload during the service interval.
If left at 0, the UAC2 function is unable to transact data on its
playback or capture endpoints in SuperSpeed mode.

Since f_uac2 currently does not support any bursting this value can
be exactly equal to the calculated wMaxPacketSize.

Tested with Windows 10 as a host.

Fixes: f8cb3d556be3 ("usb: f_uac2: adds support for SS and SSP")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210909174811.12534-3-jackp@codeaurora.org
[jackp: Backport to 5.14 with minor conflict resolution]
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/f_uac2.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/gadget/function/f_uac2.c
+++ b/drivers/usb/gadget/function/f_uac2.c
@@ -951,6 +951,9 @@ afunc_bind(struct usb_configuration *cfg
 	agdev->out_ep_maxpsize = max_t(u16, agdev->out_ep_maxpsize,
 				le16_to_cpu(ss_epout_desc.wMaxPacketSize));
 
+	ss_epin_desc_comp.wBytesPerInterval = ss_epin_desc.wMaxPacketSize;
+	ss_epout_desc_comp.wBytesPerInterval = ss_epout_desc.wMaxPacketSize;
+
 	hs_epout_desc.bEndpointAddress = fs_epout_desc.bEndpointAddress;
 	hs_epin_fback_desc.bEndpointAddress = fs_epin_fback_desc.bEndpointAddress;
 	hs_epin_desc.bEndpointAddress = fs_epin_desc.bEndpointAddress;

Re: [PATCH 5.14 075/162] kselftest/arm64: signal: Add SVE to the set of features we can check for

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 403 bytes --]

On Mon, Sep 27, 2021 at 07:02:01PM +0200, Greg Kroah-Hartman wrote:
> From: Mark Brown <broonie@kernel.org>
> 
> [ Upstream commit d4e4dc4fab686c5f3f185272a19b83930664bef5 ]
> 
> Allow testcases for SVE signal handling to flag the dependency and be
> skipped on systems without SVE support.

Unless you're backporting some test that makes use of this I'm not sure
why this is stable material?

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 5.14 000/162] 5.14.9-rc1 review

[Naresh Kamboju]

On Mon, 27 Sept 2021 at 22:48, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.14.9 release.
> There are 162 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 29 Sep 2021 17:02:05 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.14.9-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Following commit caused the build failures on s390 on 5.10 and 5.14 branches.


> Alexandra Winter <wintera@linux.ibm.com>
>     s390/qeth: fix deadlock during failing recovery

drivers/s390/net/qeth_core_main.c: In function 'qeth_close_dev_handler':
drivers/s390/net/qeth_core_main.c:83:9: error: too few arguments to
function 'ccwgroup_set_offline'
   83 |         ccwgroup_set_offline(card->gdev);
      |         ^~~~~~~~~~~~~~~~~~~~
In file included from drivers/s390/net/qeth_core.h:44,
                 from drivers/s390/net/qeth_core_main.c:46:
arch/s390/include/asm/ccwgroup.h:61:5: note: declared here
   61 | int ccwgroup_set_offline(struct ccwgroup_device *gdev, bool call_gdrv);
      |     ^~~~~~~~~~~~~~~~~~~~
make[3]: *** [scripts/Makefile.build:280:
drivers/s390/net/qeth_core_main.o] Error 1

Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.14 000/162] 5.14.9-rc1 review

[Florian Fainelli]

On 9/27/21 10:00 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.14.9 release.
> There are 162 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 29 Sep 2021 17:02:05 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.14.9-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

RE: [PATCH 5.14 000/162] 5.14.9-rc1 review

[Fox Chen]

On Mon, 27 Sep 2021 19:00:46 +0200, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 5.14.9 release.
> There are 162 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 29 Sep 2021 17:02:05 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.14.9-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

5.14.9-rc1 Successfully Compiled and booted on my Raspberry PI 4b (8g) (bcm2711)
                
Tested-by: Fox Chen <foxhlchen@gmail.com>

Re: [PATCH 5.14 000/162] 5.14.9-rc1 review

[Shuah Khan]

On 9/27/21 11:00 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.14.9 release.
> There are 162 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 29 Sep 2021 17:02:05 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.14.9-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 5.14 075/162] kselftest/arm64: signal: Add SVE to the set of features we can check for

[Sasha Levin]

On Mon, Sep 27, 2021 at 06:16:02PM +0100, Mark Brown wrote:
>On Mon, Sep 27, 2021 at 07:02:01PM +0200, Greg Kroah-Hartman wrote:
>> From: Mark Brown <broonie@kernel.org>
>>
>> [ Upstream commit d4e4dc4fab686c5f3f185272a19b83930664bef5 ]
>>
>> Allow testcases for SVE signal handling to flag the dependency and be
>> skipped on systems without SVE support.
>
>Unless you're backporting some test that makes use of this I'm not sure
>why this is stable material?

The patch right after this one wanted it :)

-- 
Thanks,
Sasha

Re: [PATCH 5.14 000/162] 5.14.9-rc1 review

[Jon Hunter]

On Mon, 27 Sep 2021 19:00:46 +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.14.9 release.
> There are 162 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 29 Sep 2021 17:02:05 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.14.9-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v5.14:
    10 builds:	10 pass, 0 fail
    28 boots:	28 pass, 0 fail
    114 tests:	114 pass, 0 fail

Linux version:	5.14.9-rc1-ga7a751350fb9
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 5.14 058/162] igc: fix build errors for PTP

[Andre Tomt]

On 27.09.2021 19:01, Greg Kroah-Hartman wrote:
> From: Randy Dunlap <rdunlap@infradead.org>
> 
> [ Upstream commit 87758511075ec961486fe78d7548dd709b524433 ]
> 
> When IGC=y and PTP_1588_CLOCK=m, the ptp_*() interface family is
> not available to the igc driver. Make this driver depend on
> PTP_1588_CLOCK_OPTIONAL so that it will build without errors.
> 
> Various igc commits have used ptp_*() functions without checking
> that PTP_1588_CLOCK is enabled. Fix all of these here.
> 
> Fixes these build errors:
> 
> ld: drivers/net/ethernet/intel/igc/igc_main.o: in function `igc_msix_other':
> igc_main.c:(.text+0x6494): undefined reference to `ptp_clock_event'
> ld: igc_main.c:(.text+0x64ef): undefined reference to `ptp_clock_event'
> ld: igc_main.c:(.text+0x6559): undefined reference to `ptp_clock_event'
> ld: drivers/net/ethernet/intel/igc/igc_ethtool.o: in function `igc_ethtool_get_ts_info':
> igc_ethtool.c:(.text+0xc7a): undefined reference to `ptp_clock_index'
> ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_feature_enable_i225':
> igc_ptp.c:(.text+0x330): undefined reference to `ptp_find_pin'
> ld: igc_ptp.c:(.text+0x36f): undefined reference to `ptp_find_pin'
> ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_init':
> igc_ptp.c:(.text+0x11cd): undefined reference to `ptp_clock_register'
> ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_stop':
> igc_ptp.c:(.text+0x12dd): undefined reference to `ptp_clock_unregister'
> ld: drivers/platform/x86/dell/dell-wmi-privacy.o: in function `dell_privacy_wmi_probe':
> 
> Fixes: 64433e5bf40ab ("igc: Enable internal i225 PPS")
> Fixes: 60dbede0c4f3d ("igc: Add support for ethtool GET_TS_INFO command")
> Fixes: 87938851b6efb ("igc: enable auxiliary PHC functions for the i225")
> Fixes: 5f2958052c582 ("igc: Add basic skeleton for PTP")
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Ederson de Souza <ederson.desouza@intel.com>
> Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
> Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
> Cc: intel-wired-lan@lists.osuosl.org
> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
> Signed-off-by: David S. Miller <davem@davemloft.net>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>   drivers/net/ethernet/intel/Kconfig | 1 +
>   1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
> index 82744a7501c7..c11d974a62d8 100644
> --- a/drivers/net/ethernet/intel/Kconfig
> +++ b/drivers/net/ethernet/intel/Kconfig
> @@ -335,6 +335,7 @@ config IGC
>   	tristate "Intel(R) Ethernet Controller I225-LM/I225-V support"
>   	default n
>   	depends on PCI
> +	depends on PTP_1588_CLOCK_OPTIONAL
>   	help
>   	  This driver supports Intel(R) Ethernet Controller I225-LM/I225-V
>   	  family of adapters.
> 

PTP_1588_CLOCK_OPTIONAL does not exist in 5.14, so this effectively 
disables the igc driver completely when applied to stable as-is.

[Intel-wired-lan] [PATCH 5.14 058/162] igc: fix build errors for PTP

[Andre Tomt]

On 27.09.2021 19:01, Greg Kroah-Hartman wrote:
> From: Randy Dunlap <rdunlap@infradead.org>
> 
> [ Upstream commit 87758511075ec961486fe78d7548dd709b524433 ]
> 
> When IGC=y and PTP_1588_CLOCK=m, the ptp_*() interface family is
> not available to the igc driver. Make this driver depend on
> PTP_1588_CLOCK_OPTIONAL so that it will build without errors.
> 
> Various igc commits have used ptp_*() functions without checking
> that PTP_1588_CLOCK is enabled. Fix all of these here.
> 
> Fixes these build errors:
> 
> ld: drivers/net/ethernet/intel/igc/igc_main.o: in function `igc_msix_other':
> igc_main.c:(.text+0x6494): undefined reference to `ptp_clock_event'
> ld: igc_main.c:(.text+0x64ef): undefined reference to `ptp_clock_event'
> ld: igc_main.c:(.text+0x6559): undefined reference to `ptp_clock_event'
> ld: drivers/net/ethernet/intel/igc/igc_ethtool.o: in function `igc_ethtool_get_ts_info':
> igc_ethtool.c:(.text+0xc7a): undefined reference to `ptp_clock_index'
> ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_feature_enable_i225':
> igc_ptp.c:(.text+0x330): undefined reference to `ptp_find_pin'
> ld: igc_ptp.c:(.text+0x36f): undefined reference to `ptp_find_pin'
> ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_init':
> igc_ptp.c:(.text+0x11cd): undefined reference to `ptp_clock_register'
> ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_stop':
> igc_ptp.c:(.text+0x12dd): undefined reference to `ptp_clock_unregister'
> ld: drivers/platform/x86/dell/dell-wmi-privacy.o: in function `dell_privacy_wmi_probe':
> 
> Fixes: 64433e5bf40ab ("igc: Enable internal i225 PPS")
> Fixes: 60dbede0c4f3d ("igc: Add support for ethtool GET_TS_INFO command")
> Fixes: 87938851b6efb ("igc: enable auxiliary PHC functions for the i225")
> Fixes: 5f2958052c582 ("igc: Add basic skeleton for PTP")
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Ederson de Souza <ederson.desouza@intel.com>
> Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
> Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
> Cc: intel-wired-lan at lists.osuosl.org
> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
> Signed-off-by: David S. Miller <davem@davemloft.net>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>   drivers/net/ethernet/intel/Kconfig | 1 +
>   1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
> index 82744a7501c7..c11d974a62d8 100644
> --- a/drivers/net/ethernet/intel/Kconfig
> +++ b/drivers/net/ethernet/intel/Kconfig
> @@ -335,6 +335,7 @@ config IGC
>   	tristate "Intel(R) Ethernet Controller I225-LM/I225-V support"
>   	default n
>   	depends on PCI
> +	depends on PTP_1588_CLOCK_OPTIONAL
>   	help
>   	  This driver supports Intel(R) Ethernet Controller I225-LM/I225-V
>   	  family of adapters.
> 

PTP_1588_CLOCK_OPTIONAL does not exist in 5.14, so this effectively 
disables the igc driver completely when applied to stable as-is.

Re: [PATCH 5.14 058/162] igc: fix build errors for PTP

[Greg Kroah-Hartman]

On Mon, Oct 04, 2021 at 06:15:56AM +0200, Andre Tomt wrote:
> On 27.09.2021 19:01, Greg Kroah-Hartman wrote:
> > From: Randy Dunlap <rdunlap@infradead.org>
> > 
> > [ Upstream commit 87758511075ec961486fe78d7548dd709b524433 ]
> > 
> > When IGC=y and PTP_1588_CLOCK=m, the ptp_*() interface family is
> > not available to the igc driver. Make this driver depend on
> > PTP_1588_CLOCK_OPTIONAL so that it will build without errors.
> > 
> > Various igc commits have used ptp_*() functions without checking
> > that PTP_1588_CLOCK is enabled. Fix all of these here.
> > 
> > Fixes these build errors:
> > 
> > ld: drivers/net/ethernet/intel/igc/igc_main.o: in function `igc_msix_other':
> > igc_main.c:(.text+0x6494): undefined reference to `ptp_clock_event'
> > ld: igc_main.c:(.text+0x64ef): undefined reference to `ptp_clock_event'
> > ld: igc_main.c:(.text+0x6559): undefined reference to `ptp_clock_event'
> > ld: drivers/net/ethernet/intel/igc/igc_ethtool.o: in function `igc_ethtool_get_ts_info':
> > igc_ethtool.c:(.text+0xc7a): undefined reference to `ptp_clock_index'
> > ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_feature_enable_i225':
> > igc_ptp.c:(.text+0x330): undefined reference to `ptp_find_pin'
> > ld: igc_ptp.c:(.text+0x36f): undefined reference to `ptp_find_pin'
> > ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_init':
> > igc_ptp.c:(.text+0x11cd): undefined reference to `ptp_clock_register'
> > ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_stop':
> > igc_ptp.c:(.text+0x12dd): undefined reference to `ptp_clock_unregister'
> > ld: drivers/platform/x86/dell/dell-wmi-privacy.o: in function `dell_privacy_wmi_probe':
> > 
> > Fixes: 64433e5bf40ab ("igc: Enable internal i225 PPS")
> > Fixes: 60dbede0c4f3d ("igc: Add support for ethtool GET_TS_INFO command")
> > Fixes: 87938851b6efb ("igc: enable auxiliary PHC functions for the i225")
> > Fixes: 5f2958052c582 ("igc: Add basic skeleton for PTP")
> > Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> > Cc: Ederson de Souza <ederson.desouza@intel.com>
> > Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
> > Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
> > Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
> > Cc: "David S. Miller" <davem@davemloft.net>
> > Cc: Jakub Kicinski <kuba@kernel.org>
> > Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
> > Cc: intel-wired-lan@lists.osuosl.org
> > Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
> > Signed-off-by: David S. Miller <davem@davemloft.net>
> > Signed-off-by: Sasha Levin <sashal@kernel.org>
> > ---
> >   drivers/net/ethernet/intel/Kconfig | 1 +
> >   1 file changed, 1 insertion(+)
> > 
> > diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
> > index 82744a7501c7..c11d974a62d8 100644
> > --- a/drivers/net/ethernet/intel/Kconfig
> > +++ b/drivers/net/ethernet/intel/Kconfig
> > @@ -335,6 +335,7 @@ config IGC
> >   	tristate "Intel(R) Ethernet Controller I225-LM/I225-V support"
> >   	default n
> >   	depends on PCI
> > +	depends on PTP_1588_CLOCK_OPTIONAL
> >   	help
> >   	  This driver supports Intel(R) Ethernet Controller I225-LM/I225-V
> >   	  family of adapters.
> > 
> 
> PTP_1588_CLOCK_OPTIONAL does not exist in 5.14, so this effectively disables
> the igc driver completely when applied to stable as-is.

Now dropped from the queue, again :)

thanks,

greg k-h

[Intel-wired-lan] [PATCH 5.14 058/162] igc: fix build errors for PTP

[Greg Kroah-Hartman]

On Mon, Oct 04, 2021 at 06:15:56AM +0200, Andre Tomt wrote:
> On 27.09.2021 19:01, Greg Kroah-Hartman wrote:
> > From: Randy Dunlap <rdunlap@infradead.org>
> > 
> > [ Upstream commit 87758511075ec961486fe78d7548dd709b524433 ]
> > 
> > When IGC=y and PTP_1588_CLOCK=m, the ptp_*() interface family is
> > not available to the igc driver. Make this driver depend on
> > PTP_1588_CLOCK_OPTIONAL so that it will build without errors.
> > 
> > Various igc commits have used ptp_*() functions without checking
> > that PTP_1588_CLOCK is enabled. Fix all of these here.
> > 
> > Fixes these build errors:
> > 
> > ld: drivers/net/ethernet/intel/igc/igc_main.o: in function `igc_msix_other':
> > igc_main.c:(.text+0x6494): undefined reference to `ptp_clock_event'
> > ld: igc_main.c:(.text+0x64ef): undefined reference to `ptp_clock_event'
> > ld: igc_main.c:(.text+0x6559): undefined reference to `ptp_clock_event'
> > ld: drivers/net/ethernet/intel/igc/igc_ethtool.o: in function `igc_ethtool_get_ts_info':
> > igc_ethtool.c:(.text+0xc7a): undefined reference to `ptp_clock_index'
> > ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_feature_enable_i225':
> > igc_ptp.c:(.text+0x330): undefined reference to `ptp_find_pin'
> > ld: igc_ptp.c:(.text+0x36f): undefined reference to `ptp_find_pin'
> > ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_init':
> > igc_ptp.c:(.text+0x11cd): undefined reference to `ptp_clock_register'
> > ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_stop':
> > igc_ptp.c:(.text+0x12dd): undefined reference to `ptp_clock_unregister'
> > ld: drivers/platform/x86/dell/dell-wmi-privacy.o: in function `dell_privacy_wmi_probe':
> > 
> > Fixes: 64433e5bf40ab ("igc: Enable internal i225 PPS")
> > Fixes: 60dbede0c4f3d ("igc: Add support for ethtool GET_TS_INFO command")
> > Fixes: 87938851b6efb ("igc: enable auxiliary PHC functions for the i225")
> > Fixes: 5f2958052c582 ("igc: Add basic skeleton for PTP")
> > Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> > Cc: Ederson de Souza <ederson.desouza@intel.com>
> > Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
> > Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
> > Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
> > Cc: "David S. Miller" <davem@davemloft.net>
> > Cc: Jakub Kicinski <kuba@kernel.org>
> > Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
> > Cc: intel-wired-lan at lists.osuosl.org
> > Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
> > Signed-off-by: David S. Miller <davem@davemloft.net>
> > Signed-off-by: Sasha Levin <sashal@kernel.org>
> > ---
> >   drivers/net/ethernet/intel/Kconfig | 1 +
> >   1 file changed, 1 insertion(+)
> > 
> > diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
> > index 82744a7501c7..c11d974a62d8 100644
> > --- a/drivers/net/ethernet/intel/Kconfig
> > +++ b/drivers/net/ethernet/intel/Kconfig
> > @@ -335,6 +335,7 @@ config IGC
> >   	tristate "Intel(R) Ethernet Controller I225-LM/I225-V support"
> >   	default n
> >   	depends on PCI
> > +	depends on PTP_1588_CLOCK_OPTIONAL
> >   	help
> >   	  This driver supports Intel(R) Ethernet Controller I225-LM/I225-V
> >   	  family of adapters.
> > 
> 
> PTP_1588_CLOCK_OPTIONAL does not exist in 5.14, so this effectively disables
> the igc driver completely when applied to stable as-is.

Now dropped from the queue, again :)

thanks,

greg k-h