[PATCH 0/6] *** Add AST2600 GFX node ***

[PATCH 0/6] *** Add AST2600 GFX node ***

[tommy-huang]

Add AST2600 GFX support first.

Joel Stanley (5):
  ARM: dts: aspeed: Add GFX node to AST2600
  ARM: dts: aspeed: ast2600-evb: Enable GFX device
  drm/aspeed: Add AST2600 support
  HACK: drm/aspeed: INTR_STS hadndling
  HACK: drm/aspeed: Paramterise modes

tommy-huang (1):
  dt-bindings: gpu: Add ASPEED GFX bindings document

 .../devicetree/bindings/gpu/aspeed-gfx.txt     |  1 +
 arch/arm/boot/dts/aspeed-ast2600-evb.dts       | 13 +++++++++++++
 arch/arm/boot/dts/aspeed-g6.dtsi               | 11 +++++++++++
 drivers/gpu/drm/aspeed/aspeed_gfx_drv.c        | 18 +++++++++++++-----
 4 files changed, 38 insertions(+), 5 deletions(-)

-- 
2.17.1

[PATCH 0/6] *** Add AST2600 GFX node ***

[tommy-huang]

Add AST2600 GFX support first.

Joel Stanley (5):
  ARM: dts: aspeed: Add GFX node to AST2600
  ARM: dts: aspeed: ast2600-evb: Enable GFX device
  drm/aspeed: Add AST2600 support
  HACK: drm/aspeed: INTR_STS hadndling
  HACK: drm/aspeed: Paramterise modes

tommy-huang (1):
  dt-bindings: gpu: Add ASPEED GFX bindings document

 .../devicetree/bindings/gpu/aspeed-gfx.txt     |  1 +
 arch/arm/boot/dts/aspeed-ast2600-evb.dts       | 13 +++++++++++++
 arch/arm/boot/dts/aspeed-g6.dtsi               | 11 +++++++++++
 drivers/gpu/drm/aspeed/aspeed_gfx_drv.c        | 18 +++++++++++++-----
 4 files changed, 38 insertions(+), 5 deletions(-)

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 1/6] ARM: dts: aspeed: Add GFX node to AST2600

[tommy-huang]

From: Joel Stanley <joel@jms.id.au>

The GFX device is present in the AST2600 SoC.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: tommy-huang <tommy_huang@aspeedtech.com>
---
 arch/arm/boot/dts/aspeed-g6.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 1b47be1704f8..e38c3742761b 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -351,6 +351,17 @@
 				quality = <100>;
 			};
 
+			gfx: display@1e6e6000 {
+				compatible = "aspeed,ast2600-gfx", "aspeed,ast2500-gfx", "syscon";
+				reg = <0x1e6e6000 0x1000>;
+				reg-io-width = <4>;
+				clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
+				resets = <&syscon ASPEED_RESET_GRAPHICS>;
+				syscon = <&syscon>;
+				status = "disabled";
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
 			xdma: xdma@1e6e7000 {
 				compatible = "aspeed,ast2600-xdma";
 				reg = <0x1e6e7000 0x100>;
-- 
2.17.1

[PATCH 1/6] ARM: dts: aspeed: Add GFX node to AST2600

[tommy-huang]

From: Joel Stanley <joel@jms.id.au>

The GFX device is present in the AST2600 SoC.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: tommy-huang <tommy_huang@aspeedtech.com>
---
 arch/arm/boot/dts/aspeed-g6.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 1b47be1704f8..e38c3742761b 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -351,6 +351,17 @@
 				quality = <100>;
 			};
 
+			gfx: display@1e6e6000 {
+				compatible = "aspeed,ast2600-gfx", "aspeed,ast2500-gfx", "syscon";
+				reg = <0x1e6e6000 0x1000>;
+				reg-io-width = <4>;
+				clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
+				resets = <&syscon ASPEED_RESET_GRAPHICS>;
+				syscon = <&syscon>;
+				status = "disabled";
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
 			xdma: xdma@1e6e7000 {
 				compatible = "aspeed,ast2600-xdma";
 				reg = <0x1e6e7000 0x100>;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/6] ARM: dts: aspeed: ast2600-evb: Enable GFX device

[tommy-huang]

From: Joel Stanley <joel@jms.id.au>

Enable the GFX device with a framebuffer memory region.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: tommy-huang <tommy_huang@aspeedtech.com>
---
 arch/arm/boot/dts/aspeed-ast2600-evb.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
index b7eb552640cb..195ccd1952da 100644
--- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
@@ -23,6 +23,19 @@
 		reg = <0x80000000 0x80000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
 	vcc_sdhci0: regulator-vcc-sdhci0 {
 		compatible = "regulator-fixed";
 		regulator-name = "SDHCI0 Vcc";
-- 
2.17.1

[PATCH 2/6] ARM: dts: aspeed: ast2600-evb: Enable GFX device

[tommy-huang]

From: Joel Stanley <joel@jms.id.au>

Enable the GFX device with a framebuffer memory region.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: tommy-huang <tommy_huang@aspeedtech.com>
---
 arch/arm/boot/dts/aspeed-ast2600-evb.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
index b7eb552640cb..195ccd1952da 100644
--- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
@@ -23,6 +23,19 @@
 		reg = <0x80000000 0x80000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
 	vcc_sdhci0: regulator-vcc-sdhci0 {
 		compatible = "regulator-fixed";
 		regulator-name = "SDHCI0 Vcc";
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 3/6] drm/aspeed: Add AST2600 support

[tommy-huang]

From: Joel Stanley <joel@jms.id.au>

The values for the threshold and scan line size come from the ASPEED
SDK.

The DAC register is SCUC0 in the AST2600 datasheet. It has the same
layout as the previous generations.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: tommy-huang <tommy_huang@aspeedtech.com>
---
 drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
index b53fee6f1c17..ea9cb0a4f16c 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
@@ -79,9 +79,16 @@ static const struct aspeed_gfx_config ast2500_config = {
 	.scan_line_max = 128,
 };
 
+static const struct aspeed_gfx_config ast2600_config = {
+	.dac_reg = 0xc0,
+	.throd_val = CRT_THROD_LOW(0x50) | CRT_THROD_HIGH(0x70),
+	.scan_line_max = 128,
+};
+
 static const struct of_device_id aspeed_gfx_match[] = {
 	{ .compatible = "aspeed,ast2400-gfx", .data = &ast2400_config },
 	{ .compatible = "aspeed,ast2500-gfx", .data = &ast2500_config },
+	{ .compatible = "aspeed,ast2600-gfx", .data = &ast2600_config },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, aspeed_gfx_match);
-- 
2.17.1

[PATCH 3/6] drm/aspeed: Add AST2600 support

[tommy-huang]

From: Joel Stanley <joel@jms.id.au>

The values for the threshold and scan line size come from the ASPEED
SDK.

The DAC register is SCUC0 in the AST2600 datasheet. It has the same
layout as the previous generations.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: tommy-huang <tommy_huang@aspeedtech.com>
---
 drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
index b53fee6f1c17..ea9cb0a4f16c 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
@@ -79,9 +79,16 @@ static const struct aspeed_gfx_config ast2500_config = {
 	.scan_line_max = 128,
 };
 
+static const struct aspeed_gfx_config ast2600_config = {
+	.dac_reg = 0xc0,
+	.throd_val = CRT_THROD_LOW(0x50) | CRT_THROD_HIGH(0x70),
+	.scan_line_max = 128,
+};
+
 static const struct of_device_id aspeed_gfx_match[] = {
 	{ .compatible = "aspeed,ast2400-gfx", .data = &ast2400_config },
 	{ .compatible = "aspeed,ast2500-gfx", .data = &ast2500_config },
+	{ .compatible = "aspeed,ast2600-gfx", .data = &ast2600_config },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, aspeed_gfx_match);
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 4/6] HACK: drm/aspeed: INTR_STS hadndling

[tommy-huang]

From: Joel Stanley <joel@jms.id.au>

The 2600 uses this register differently. THis is a TODO to come up with
a method of handling that.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: tommy-huang <tommy_huang@aspeedtech.com>
---
 drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
index ea9cb0a4f16c..33095477cc03 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
@@ -126,7 +126,8 @@ static irqreturn_t aspeed_gfx_irq_handler(int irq, void *data)
 
 	if (reg & CRT_CTRL_VERTICAL_INTR_STS) {
 		drm_crtc_handle_vblank(&priv->pipe.crtc);
-		writel(reg, priv->base + CRT_CTRL1);
+		/* TODO */
+		writel(CRT_CTRL_VERTICAL_INTR_STS, priv->base + CRT_STATUS);
 		return IRQ_HANDLED;
 	}
 
-- 
2.17.1

[PATCH 4/6] HACK: drm/aspeed: INTR_STS hadndling

[tommy-huang]

From: Joel Stanley <joel@jms.id.au>

The 2600 uses this register differently. THis is a TODO to come up with
a method of handling that.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: tommy-huang <tommy_huang@aspeedtech.com>
---
 drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
index ea9cb0a4f16c..33095477cc03 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
@@ -126,7 +126,8 @@ static irqreturn_t aspeed_gfx_irq_handler(int irq, void *data)
 
 	if (reg & CRT_CTRL_VERTICAL_INTR_STS) {
 		drm_crtc_handle_vblank(&priv->pipe.crtc);
-		writel(reg, priv->base + CRT_CTRL1);
+		/* TODO */
+		writel(CRT_CTRL_VERTICAL_INTR_STS, priv->base + CRT_STATUS);
 		return IRQ_HANDLED;
 	}
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 5/6] HACK: drm/aspeed: Paramterise modes

[tommy-huang]

From: Joel Stanley <joel@jms.id.au>

The AST2600 will run at 1024x868.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: tommy-huang <tommy_huang@aspeedtech.com>
---
 drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
index 33095477cc03..11a44b08bd3f 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
@@ -99,7 +99,7 @@ static const struct drm_mode_config_funcs aspeed_gfx_mode_config_funcs = {
 	.atomic_commit		= drm_atomic_helper_commit,
 };
 
-static int aspeed_gfx_setup_mode_config(struct drm_device *drm)
+static int aspeed_gfx_setup_mode_config(struct drm_device *drm, int width, int height)
 {
 	int ret;
 
@@ -109,8 +109,8 @@ static int aspeed_gfx_setup_mode_config(struct drm_device *drm)
 
 	drm->mode_config.min_width = 0;
 	drm->mode_config.min_height = 0;
-	drm->mode_config.max_width = 800;
-	drm->mode_config.max_height = 600;
+	drm->mode_config.max_width = width;
+	drm->mode_config.max_height = height;
 	drm->mode_config.funcs = &aspeed_gfx_mode_config_funcs;
 
 	return ret;
@@ -201,7 +201,7 @@ static int aspeed_gfx_load(struct drm_device *drm)
 	writel(0, priv->base + CRT_CTRL1);
 	writel(0, priv->base + CRT_CTRL2);
 
-	ret = aspeed_gfx_setup_mode_config(drm);
+	ret = aspeed_gfx_setup_mode_config(drm, 800, 600);
 	if (ret < 0)
 		return ret;
 
-- 
2.17.1

[PATCH 5/6] HACK: drm/aspeed: Paramterise modes

[tommy-huang]

From: Joel Stanley <joel@jms.id.au>

The AST2600 will run at 1024x868.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: tommy-huang <tommy_huang@aspeedtech.com>
---
 drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
index 33095477cc03..11a44b08bd3f 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
@@ -99,7 +99,7 @@ static const struct drm_mode_config_funcs aspeed_gfx_mode_config_funcs = {
 	.atomic_commit		= drm_atomic_helper_commit,
 };
 
-static int aspeed_gfx_setup_mode_config(struct drm_device *drm)
+static int aspeed_gfx_setup_mode_config(struct drm_device *drm, int width, int height)
 {
 	int ret;
 
@@ -109,8 +109,8 @@ static int aspeed_gfx_setup_mode_config(struct drm_device *drm)
 
 	drm->mode_config.min_width = 0;
 	drm->mode_config.min_height = 0;
-	drm->mode_config.max_width = 800;
-	drm->mode_config.max_height = 600;
+	drm->mode_config.max_width = width;
+	drm->mode_config.max_height = height;
 	drm->mode_config.funcs = &aspeed_gfx_mode_config_funcs;
 
 	return ret;
@@ -201,7 +201,7 @@ static int aspeed_gfx_load(struct drm_device *drm)
 	writel(0, priv->base + CRT_CTRL1);
 	writel(0, priv->base + CRT_CTRL2);
 
-	ret = aspeed_gfx_setup_mode_config(drm);
+	ret = aspeed_gfx_setup_mode_config(drm, 800, 600);
 	if (ret < 0)
 		return ret;
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 6/6] dt-bindings: gpu: Add ASPEED GFX bindings document

[tommy-huang]

Add ast2600-gfx description for gfx driver.

Signed-off-by: tommy-huang <tommy_huang@aspeedtech.com>
---
 Documentation/devicetree/bindings/gpu/aspeed-gfx.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/gpu/aspeed-gfx.txt b/Documentation/devicetree/bindings/gpu/aspeed-gfx.txt
index 958bdf962339..29ecf119cef2 100644
--- a/Documentation/devicetree/bindings/gpu/aspeed-gfx.txt
+++ b/Documentation/devicetree/bindings/gpu/aspeed-gfx.txt
@@ -3,6 +3,7 @@ Device tree configuration for the GFX display device on the ASPEED SoCs
 Required properties:
   - compatible
     * Must be one of the following:
+      + aspeed,ast2600-gfx
       + aspeed,ast2500-gfx
       + aspeed,ast2400-gfx
     * In addition, the ASPEED pinctrl bindings require the 'syscon' property to
-- 
2.17.1

[PATCH 6/6] dt-bindings: gpu: Add ASPEED GFX bindings document

[tommy-huang]

Add ast2600-gfx description for gfx driver.

Signed-off-by: tommy-huang <tommy_huang@aspeedtech.com>
---
 Documentation/devicetree/bindings/gpu/aspeed-gfx.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/gpu/aspeed-gfx.txt b/Documentation/devicetree/bindings/gpu/aspeed-gfx.txt
index 958bdf962339..29ecf119cef2 100644
--- a/Documentation/devicetree/bindings/gpu/aspeed-gfx.txt
+++ b/Documentation/devicetree/bindings/gpu/aspeed-gfx.txt
@@ -3,6 +3,7 @@ Device tree configuration for the GFX display device on the ASPEED SoCs
 Required properties:
   - compatible
     * Must be one of the following:
+      + aspeed,ast2600-gfx
       + aspeed,ast2500-gfx
       + aspeed,ast2400-gfx
     * In addition, the ASPEED pinctrl bindings require the 'syscon' property to
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 6/6] dt-bindings: gpu: Add ASPEED GFX bindings document

[Rob Herring]

On Tue, 28 Sep 2021 10:57:03 +0800, tommy-huang wrote:
> Add ast2600-gfx description for gfx driver.
> 
> Signed-off-by: tommy-huang <tommy_huang@aspeedtech.com>
> ---
>  Documentation/devicetree/bindings/gpu/aspeed-gfx.txt | 1 +
>  1 file changed, 1 insertion(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH 6/6] dt-bindings: gpu: Add ASPEED GFX bindings document

[Rob Herring]

On Tue, 28 Sep 2021 10:57:03 +0800, tommy-huang wrote:
> Add ast2600-gfx description for gfx driver.
> 
> Signed-off-by: tommy-huang <tommy_huang@aspeedtech.com>
> ---
>  Documentation/devicetree/bindings/gpu/aspeed-gfx.txt | 1 +
>  1 file changed, 1 insertion(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel