All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v8 00/12] Clean up "mediatek,larb"
@ 2021-09-29  1:37 ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich

MediaTek IOMMU block diagram always like below:

        M4U
         |
    smi-common
         |
  -------------
  |         |  ...
  |         |
larb1     larb2
  |         |
vdec       venc

All the consumer connect with smi-larb, then connect with smi-common.

When the consumer works, it should enable the smi-larb's power which also
need enable the smi-common's power firstly.

Thus, Firstly, use the device link connect the consumer and the
smi-larbs. then add device link between the smi-larb and smi-common.

After adding the device_link, then "mediatek,larb" property can be removed.
the iommu consumer don't need call the mtk_smi_larb_get/put to enable
the power and clock of smi-larb and smi-common.

About the MM dt-binding/dtsi patches, I guess they should go together, thus
I don't split them for each a MM module and each a SoC.

Base on a jpeg dtbing patchset[1] that already got the necessary R-b.

[1] https://lore.kernel.org/linux-mediatek/20210702102304.3346429-1-hsinyi@chromium.org/

Change notes:
v8: 1) Rebase on v5.15-rc1.
    2) Don't rebase the below mdp patchset that may still need more discuss.
    https://lore.kernel.org/linux-mediatek/20210709022324.1607884-1-eizan@chromium.org/
    3) Add Frank's Tested-by. Remove Dafna's Tested-by as he requested.

v7: https://lore.kernel.org/linux-mediatek/20210730025238.22456-1-yong.wu@mediatek.com/
    1) Fix a arm32 boot fail issue. reported from Frank.
    2) Add a return fail in the mtk drm. suggested by Dafna.

v6: https://lore.kernel.org/linux-mediatek/20210714025626.5528-1-yong.wu@mediatek.com/
    1) rebase on v5.14-rc1.
    2) Fix the issue commented in v5 from Dafna and Hsin-Yi.
    3) Remove the patches about using pm_runtime_resume_and_get since they have
       already been merged by other patches.

v5: https://lore.kernel.org/linux-mediatek/20210410091128.31823-1-yong.wu@mediatek.com/
    1) Base v5.12-rc2.
    2) Remove changing the mtk-iommu to module_platform_driver patch, It have already been a
    independent patch.

v4: https://lore.kernel.org/linux-mediatek/1590826218-23653-1-git-send-email-yong.wu@mediatek.com/ 
    base on v5.7-rc1.
  1) Move drm PM patch before smi patchs.
  2) Change builtin_platform_driver to module_platform_driver since we may need
     build as module.
  3) Rebase many patchset as above.

v3: https://lore.kernel.org/linux-iommu/1567503456-24725-1-git-send-email-yong.wu@mediatek.com/
    1) rebase on v5.3-rc1 and the latest mt8183 patchset.
    2) Use device_is_bound to check whether the driver is ready from Matthias.    
    3) Add DL_FLAG_STATELESS flag when calling device_link_add and explain the
   reason in the commit message[3/14].
    4) Add a display patch[12/14] into this series. otherwise it may affect
   display HW fastlogo even though it don't happen in mt8183.
   
v2: https://lore.kernel.org/linux-iommu/1560171313-28299-1-git-send-email-yong.wu@mediatek.com/
   1) rebase on v5.2-rc1.
   2) Move adding device_link between the consumer and smi-larb into
iommu_add_device from Robin.
   3) add DL_FLAG_AUTOREMOVE_CONSUMER even though the smi is built-in from Evan.
   4) Remove the shutdown callback in iommu.   

v1: https://lore.kernel.org/linux-iommu/1546318276-18993-1-git-send-email-yong.wu@mediatek.com/

Yong Wu (11):
  dt-binding: mediatek: Get rid of mediatek, larb for multimedia HW
  iommu/mediatek-v1: Free the existed fwspec if the master dev already
    has
  iommu/mediatek: Add probe_defer for smi-larb
  iommu/mediatek: Add device_link between the consumer and the larb
    devices
  media: mtk-jpeg: Get rid of mtk_smi_larb_get/put
  media: mtk-mdp: Get rid of mtk_smi_larb_get/put
  drm/mediatek: Get rid of mtk_smi_larb_get/put
  media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
  memory: mtk-smi: Get rid of mtk_smi_larb_get/put
  arm: dts: mediatek: Get rid of mediatek,larb for MM nodes
  arm64: dts: mediatek: Get rid of mediatek,larb for MM nodes

Yongqiang Niu (1):
  drm/mediatek: Add pm runtime support for ovl and rdma

 .../display/mediatek/mediatek,disp.txt        |  9 ----
 .../bindings/media/mediatek-jpeg-decoder.yaml |  9 ----
 .../bindings/media/mediatek-jpeg-encoder.yaml |  9 ----
 .../bindings/media/mediatek-mdp.txt           |  8 ----
 .../bindings/media/mediatek-vcodec.txt        |  4 --
 arch/arm/boot/dts/mt2701.dtsi                 |  2 -
 arch/arm/boot/dts/mt7623n.dtsi                |  5 ---
 arch/arm64/boot/dts/mediatek/mt8173.dtsi      | 16 -------
 arch/arm64/boot/dts/mediatek/mt8183.dtsi      |  6 ---
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c       |  8 +++-
 drivers/gpu/drm/mediatek/mtk_disp_rdma.c      |  9 +++-
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c       | 15 ++++---
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c   | 36 +--------------
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h   |  1 -
 drivers/gpu/drm/mediatek/mtk_drm_drv.c        |  5 +--
 drivers/iommu/mtk_iommu.c                     | 24 +++++++++-
 drivers/iommu/mtk_iommu_v1.c                  | 31 ++++++++++++-
 .../media/platform/mtk-jpeg/mtk_jpeg_core.c   | 45 +------------------
 .../media/platform/mtk-jpeg/mtk_jpeg_core.h   |  2 -
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.c | 40 -----------------
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.h |  2 -
 drivers/media/platform/mtk-mdp/mtk_mdp_core.c |  1 -
 .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c   | 37 +++------------
 .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  3 --
 .../platform/mtk-vcodec/mtk_vcodec_enc.c      |  1 -
 .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c   | 44 +++---------------
 drivers/memory/mtk-smi.c                      | 14 ------
 include/soc/mediatek/smi.h                    | 20 ---------
 28 files changed, 90 insertions(+), 316 deletions(-)

-- 
2.18.0



^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 00/12] Clean up "mediatek,larb"
@ 2021-09-29  1:37 ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Dafna Hirschfeld, Chun-Kuang Hu, Will Deacon, dri-devel,
	anthony.huang, youlin.pei, Evan Green, Eizan Miyamoto,
	Matthias Kaehlcke, linux-arm-kernel, linux-media, devicetree,
	Philipp Zabel, Frank Wunderlich, yi.kuo, linux-mediatek,
	Hsin-Yi Wang, Tiffany Lin, anan.sun, srv_heupstream, acourbot,
	linux-kernel, iommu, Daniel Vetter, Robin Murphy

MediaTek IOMMU block diagram always like below:

        M4U
         |
    smi-common
         |
  -------------
  |         |  ...
  |         |
larb1     larb2
  |         |
vdec       venc

All the consumer connect with smi-larb, then connect with smi-common.

When the consumer works, it should enable the smi-larb's power which also
need enable the smi-common's power firstly.

Thus, Firstly, use the device link connect the consumer and the
smi-larbs. then add device link between the smi-larb and smi-common.

After adding the device_link, then "mediatek,larb" property can be removed.
the iommu consumer don't need call the mtk_smi_larb_get/put to enable
the power and clock of smi-larb and smi-common.

About the MM dt-binding/dtsi patches, I guess they should go together, thus
I don't split them for each a MM module and each a SoC.

Base on a jpeg dtbing patchset[1] that already got the necessary R-b.

[1] https://lore.kernel.org/linux-mediatek/20210702102304.3346429-1-hsinyi@chromium.org/

Change notes:
v8: 1) Rebase on v5.15-rc1.
    2) Don't rebase the below mdp patchset that may still need more discuss.
    https://lore.kernel.org/linux-mediatek/20210709022324.1607884-1-eizan@chromium.org/
    3) Add Frank's Tested-by. Remove Dafna's Tested-by as he requested.

v7: https://lore.kernel.org/linux-mediatek/20210730025238.22456-1-yong.wu@mediatek.com/
    1) Fix a arm32 boot fail issue. reported from Frank.
    2) Add a return fail in the mtk drm. suggested by Dafna.

v6: https://lore.kernel.org/linux-mediatek/20210714025626.5528-1-yong.wu@mediatek.com/
    1) rebase on v5.14-rc1.
    2) Fix the issue commented in v5 from Dafna and Hsin-Yi.
    3) Remove the patches about using pm_runtime_resume_and_get since they have
       already been merged by other patches.

v5: https://lore.kernel.org/linux-mediatek/20210410091128.31823-1-yong.wu@mediatek.com/
    1) Base v5.12-rc2.
    2) Remove changing the mtk-iommu to module_platform_driver patch, It have already been a
    independent patch.

v4: https://lore.kernel.org/linux-mediatek/1590826218-23653-1-git-send-email-yong.wu@mediatek.com/ 
    base on v5.7-rc1.
  1) Move drm PM patch before smi patchs.
  2) Change builtin_platform_driver to module_platform_driver since we may need
     build as module.
  3) Rebase many patchset as above.

v3: https://lore.kernel.org/linux-iommu/1567503456-24725-1-git-send-email-yong.wu@mediatek.com/
    1) rebase on v5.3-rc1 and the latest mt8183 patchset.
    2) Use device_is_bound to check whether the driver is ready from Matthias.    
    3) Add DL_FLAG_STATELESS flag when calling device_link_add and explain the
   reason in the commit message[3/14].
    4) Add a display patch[12/14] into this series. otherwise it may affect
   display HW fastlogo even though it don't happen in mt8183.
   
v2: https://lore.kernel.org/linux-iommu/1560171313-28299-1-git-send-email-yong.wu@mediatek.com/
   1) rebase on v5.2-rc1.
   2) Move adding device_link between the consumer and smi-larb into
iommu_add_device from Robin.
   3) add DL_FLAG_AUTOREMOVE_CONSUMER even though the smi is built-in from Evan.
   4) Remove the shutdown callback in iommu.   

v1: https://lore.kernel.org/linux-iommu/1546318276-18993-1-git-send-email-yong.wu@mediatek.com/

Yong Wu (11):
  dt-binding: mediatek: Get rid of mediatek, larb for multimedia HW
  iommu/mediatek-v1: Free the existed fwspec if the master dev already
    has
  iommu/mediatek: Add probe_defer for smi-larb
  iommu/mediatek: Add device_link between the consumer and the larb
    devices
  media: mtk-jpeg: Get rid of mtk_smi_larb_get/put
  media: mtk-mdp: Get rid of mtk_smi_larb_get/put
  drm/mediatek: Get rid of mtk_smi_larb_get/put
  media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
  memory: mtk-smi: Get rid of mtk_smi_larb_get/put
  arm: dts: mediatek: Get rid of mediatek,larb for MM nodes
  arm64: dts: mediatek: Get rid of mediatek,larb for MM nodes

Yongqiang Niu (1):
  drm/mediatek: Add pm runtime support for ovl and rdma

 .../display/mediatek/mediatek,disp.txt        |  9 ----
 .../bindings/media/mediatek-jpeg-decoder.yaml |  9 ----
 .../bindings/media/mediatek-jpeg-encoder.yaml |  9 ----
 .../bindings/media/mediatek-mdp.txt           |  8 ----
 .../bindings/media/mediatek-vcodec.txt        |  4 --
 arch/arm/boot/dts/mt2701.dtsi                 |  2 -
 arch/arm/boot/dts/mt7623n.dtsi                |  5 ---
 arch/arm64/boot/dts/mediatek/mt8173.dtsi      | 16 -------
 arch/arm64/boot/dts/mediatek/mt8183.dtsi      |  6 ---
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c       |  8 +++-
 drivers/gpu/drm/mediatek/mtk_disp_rdma.c      |  9 +++-
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c       | 15 ++++---
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c   | 36 +--------------
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h   |  1 -
 drivers/gpu/drm/mediatek/mtk_drm_drv.c        |  5 +--
 drivers/iommu/mtk_iommu.c                     | 24 +++++++++-
 drivers/iommu/mtk_iommu_v1.c                  | 31 ++++++++++++-
 .../media/platform/mtk-jpeg/mtk_jpeg_core.c   | 45 +------------------
 .../media/platform/mtk-jpeg/mtk_jpeg_core.h   |  2 -
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.c | 40 -----------------
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.h |  2 -
 drivers/media/platform/mtk-mdp/mtk_mdp_core.c |  1 -
 .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c   | 37 +++------------
 .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  3 --
 .../platform/mtk-vcodec/mtk_vcodec_enc.c      |  1 -
 .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c   | 44 +++---------------
 drivers/memory/mtk-smi.c                      | 14 ------
 include/soc/mediatek/smi.h                    | 20 ---------
 28 files changed, 90 insertions(+), 316 deletions(-)

-- 
2.18.0


_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 00/12] Clean up "mediatek,larb"
@ 2021-09-29  1:37 ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich

MediaTek IOMMU block diagram always like below:

        M4U
         |
    smi-common
         |
  -------------
  |         |  ...
  |         |
larb1     larb2
  |         |
vdec       venc

All the consumer connect with smi-larb, then connect with smi-common.

When the consumer works, it should enable the smi-larb's power which also
need enable the smi-common's power firstly.

Thus, Firstly, use the device link connect the consumer and the
smi-larbs. then add device link between the smi-larb and smi-common.

After adding the device_link, then "mediatek,larb" property can be removed.
the iommu consumer don't need call the mtk_smi_larb_get/put to enable
the power and clock of smi-larb and smi-common.

About the MM dt-binding/dtsi patches, I guess they should go together, thus
I don't split them for each a MM module and each a SoC.

Base on a jpeg dtbing patchset[1] that already got the necessary R-b.

[1] https://lore.kernel.org/linux-mediatek/20210702102304.3346429-1-hsinyi@chromium.org/

Change notes:
v8: 1) Rebase on v5.15-rc1.
    2) Don't rebase the below mdp patchset that may still need more discuss.
    https://lore.kernel.org/linux-mediatek/20210709022324.1607884-1-eizan@chromium.org/
    3) Add Frank's Tested-by. Remove Dafna's Tested-by as he requested.

v7: https://lore.kernel.org/linux-mediatek/20210730025238.22456-1-yong.wu@mediatek.com/
    1) Fix a arm32 boot fail issue. reported from Frank.
    2) Add a return fail in the mtk drm. suggested by Dafna.

v6: https://lore.kernel.org/linux-mediatek/20210714025626.5528-1-yong.wu@mediatek.com/
    1) rebase on v5.14-rc1.
    2) Fix the issue commented in v5 from Dafna and Hsin-Yi.
    3) Remove the patches about using pm_runtime_resume_and_get since they have
       already been merged by other patches.

v5: https://lore.kernel.org/linux-mediatek/20210410091128.31823-1-yong.wu@mediatek.com/
    1) Base v5.12-rc2.
    2) Remove changing the mtk-iommu to module_platform_driver patch, It have already been a
    independent patch.

v4: https://lore.kernel.org/linux-mediatek/1590826218-23653-1-git-send-email-yong.wu@mediatek.com/ 
    base on v5.7-rc1.
  1) Move drm PM patch before smi patchs.
  2) Change builtin_platform_driver to module_platform_driver since we may need
     build as module.
  3) Rebase many patchset as above.

v3: https://lore.kernel.org/linux-iommu/1567503456-24725-1-git-send-email-yong.wu@mediatek.com/
    1) rebase on v5.3-rc1 and the latest mt8183 patchset.
    2) Use device_is_bound to check whether the driver is ready from Matthias.    
    3) Add DL_FLAG_STATELESS flag when calling device_link_add and explain the
   reason in the commit message[3/14].
    4) Add a display patch[12/14] into this series. otherwise it may affect
   display HW fastlogo even though it don't happen in mt8183.
   
v2: https://lore.kernel.org/linux-iommu/1560171313-28299-1-git-send-email-yong.wu@mediatek.com/
   1) rebase on v5.2-rc1.
   2) Move adding device_link between the consumer and smi-larb into
iommu_add_device from Robin.
   3) add DL_FLAG_AUTOREMOVE_CONSUMER even though the smi is built-in from Evan.
   4) Remove the shutdown callback in iommu.   

v1: https://lore.kernel.org/linux-iommu/1546318276-18993-1-git-send-email-yong.wu@mediatek.com/

Yong Wu (11):
  dt-binding: mediatek: Get rid of mediatek, larb for multimedia HW
  iommu/mediatek-v1: Free the existed fwspec if the master dev already
    has
  iommu/mediatek: Add probe_defer for smi-larb
  iommu/mediatek: Add device_link between the consumer and the larb
    devices
  media: mtk-jpeg: Get rid of mtk_smi_larb_get/put
  media: mtk-mdp: Get rid of mtk_smi_larb_get/put
  drm/mediatek: Get rid of mtk_smi_larb_get/put
  media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
  memory: mtk-smi: Get rid of mtk_smi_larb_get/put
  arm: dts: mediatek: Get rid of mediatek,larb for MM nodes
  arm64: dts: mediatek: Get rid of mediatek,larb for MM nodes

Yongqiang Niu (1):
  drm/mediatek: Add pm runtime support for ovl and rdma

 .../display/mediatek/mediatek,disp.txt        |  9 ----
 .../bindings/media/mediatek-jpeg-decoder.yaml |  9 ----
 .../bindings/media/mediatek-jpeg-encoder.yaml |  9 ----
 .../bindings/media/mediatek-mdp.txt           |  8 ----
 .../bindings/media/mediatek-vcodec.txt        |  4 --
 arch/arm/boot/dts/mt2701.dtsi                 |  2 -
 arch/arm/boot/dts/mt7623n.dtsi                |  5 ---
 arch/arm64/boot/dts/mediatek/mt8173.dtsi      | 16 -------
 arch/arm64/boot/dts/mediatek/mt8183.dtsi      |  6 ---
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c       |  8 +++-
 drivers/gpu/drm/mediatek/mtk_disp_rdma.c      |  9 +++-
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c       | 15 ++++---
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c   | 36 +--------------
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h   |  1 -
 drivers/gpu/drm/mediatek/mtk_drm_drv.c        |  5 +--
 drivers/iommu/mtk_iommu.c                     | 24 +++++++++-
 drivers/iommu/mtk_iommu_v1.c                  | 31 ++++++++++++-
 .../media/platform/mtk-jpeg/mtk_jpeg_core.c   | 45 +------------------
 .../media/platform/mtk-jpeg/mtk_jpeg_core.h   |  2 -
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.c | 40 -----------------
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.h |  2 -
 drivers/media/platform/mtk-mdp/mtk_mdp_core.c |  1 -
 .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c   | 37 +++------------
 .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  3 --
 .../platform/mtk-vcodec/mtk_vcodec_enc.c      |  1 -
 .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c   | 44 +++---------------
 drivers/memory/mtk-smi.c                      | 14 ------
 include/soc/mediatek/smi.h                    | 20 ---------
 28 files changed, 90 insertions(+), 316 deletions(-)

-- 
2.18.0



^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 00/12] Clean up "mediatek,larb"
@ 2021-09-29  1:37 ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich

MediaTek IOMMU block diagram always like below:

        M4U
         |
    smi-common
         |
  -------------
  |         |  ...
  |         |
larb1     larb2
  |         |
vdec       venc

All the consumer connect with smi-larb, then connect with smi-common.

When the consumer works, it should enable the smi-larb's power which also
need enable the smi-common's power firstly.

Thus, Firstly, use the device link connect the consumer and the
smi-larbs. then add device link between the smi-larb and smi-common.

After adding the device_link, then "mediatek,larb" property can be removed.
the iommu consumer don't need call the mtk_smi_larb_get/put to enable
the power and clock of smi-larb and smi-common.

About the MM dt-binding/dtsi patches, I guess they should go together, thus
I don't split them for each a MM module and each a SoC.

Base on a jpeg dtbing patchset[1] that already got the necessary R-b.

[1] https://lore.kernel.org/linux-mediatek/20210702102304.3346429-1-hsinyi@chromium.org/

Change notes:
v8: 1) Rebase on v5.15-rc1.
    2) Don't rebase the below mdp patchset that may still need more discuss.
    https://lore.kernel.org/linux-mediatek/20210709022324.1607884-1-eizan@chromium.org/
    3) Add Frank's Tested-by. Remove Dafna's Tested-by as he requested.

v7: https://lore.kernel.org/linux-mediatek/20210730025238.22456-1-yong.wu@mediatek.com/
    1) Fix a arm32 boot fail issue. reported from Frank.
    2) Add a return fail in the mtk drm. suggested by Dafna.

v6: https://lore.kernel.org/linux-mediatek/20210714025626.5528-1-yong.wu@mediatek.com/
    1) rebase on v5.14-rc1.
    2) Fix the issue commented in v5 from Dafna and Hsin-Yi.
    3) Remove the patches about using pm_runtime_resume_and_get since they have
       already been merged by other patches.

v5: https://lore.kernel.org/linux-mediatek/20210410091128.31823-1-yong.wu@mediatek.com/
    1) Base v5.12-rc2.
    2) Remove changing the mtk-iommu to module_platform_driver patch, It have already been a
    independent patch.

v4: https://lore.kernel.org/linux-mediatek/1590826218-23653-1-git-send-email-yong.wu@mediatek.com/ 
    base on v5.7-rc1.
  1) Move drm PM patch before smi patchs.
  2) Change builtin_platform_driver to module_platform_driver since we may need
     build as module.
  3) Rebase many patchset as above.

v3: https://lore.kernel.org/linux-iommu/1567503456-24725-1-git-send-email-yong.wu@mediatek.com/
    1) rebase on v5.3-rc1 and the latest mt8183 patchset.
    2) Use device_is_bound to check whether the driver is ready from Matthias.    
    3) Add DL_FLAG_STATELESS flag when calling device_link_add and explain the
   reason in the commit message[3/14].
    4) Add a display patch[12/14] into this series. otherwise it may affect
   display HW fastlogo even though it don't happen in mt8183.
   
v2: https://lore.kernel.org/linux-iommu/1560171313-28299-1-git-send-email-yong.wu@mediatek.com/
   1) rebase on v5.2-rc1.
   2) Move adding device_link between the consumer and smi-larb into
iommu_add_device from Robin.
   3) add DL_FLAG_AUTOREMOVE_CONSUMER even though the smi is built-in from Evan.
   4) Remove the shutdown callback in iommu.   

v1: https://lore.kernel.org/linux-iommu/1546318276-18993-1-git-send-email-yong.wu@mediatek.com/

Yong Wu (11):
  dt-binding: mediatek: Get rid of mediatek, larb for multimedia HW
  iommu/mediatek-v1: Free the existed fwspec if the master dev already
    has
  iommu/mediatek: Add probe_defer for smi-larb
  iommu/mediatek: Add device_link between the consumer and the larb
    devices
  media: mtk-jpeg: Get rid of mtk_smi_larb_get/put
  media: mtk-mdp: Get rid of mtk_smi_larb_get/put
  drm/mediatek: Get rid of mtk_smi_larb_get/put
  media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
  memory: mtk-smi: Get rid of mtk_smi_larb_get/put
  arm: dts: mediatek: Get rid of mediatek,larb for MM nodes
  arm64: dts: mediatek: Get rid of mediatek,larb for MM nodes

Yongqiang Niu (1):
  drm/mediatek: Add pm runtime support for ovl and rdma

 .../display/mediatek/mediatek,disp.txt        |  9 ----
 .../bindings/media/mediatek-jpeg-decoder.yaml |  9 ----
 .../bindings/media/mediatek-jpeg-encoder.yaml |  9 ----
 .../bindings/media/mediatek-mdp.txt           |  8 ----
 .../bindings/media/mediatek-vcodec.txt        |  4 --
 arch/arm/boot/dts/mt2701.dtsi                 |  2 -
 arch/arm/boot/dts/mt7623n.dtsi                |  5 ---
 arch/arm64/boot/dts/mediatek/mt8173.dtsi      | 16 -------
 arch/arm64/boot/dts/mediatek/mt8183.dtsi      |  6 ---
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c       |  8 +++-
 drivers/gpu/drm/mediatek/mtk_disp_rdma.c      |  9 +++-
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c       | 15 ++++---
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c   | 36 +--------------
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h   |  1 -
 drivers/gpu/drm/mediatek/mtk_drm_drv.c        |  5 +--
 drivers/iommu/mtk_iommu.c                     | 24 +++++++++-
 drivers/iommu/mtk_iommu_v1.c                  | 31 ++++++++++++-
 .../media/platform/mtk-jpeg/mtk_jpeg_core.c   | 45 +------------------
 .../media/platform/mtk-jpeg/mtk_jpeg_core.h   |  2 -
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.c | 40 -----------------
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.h |  2 -
 drivers/media/platform/mtk-mdp/mtk_mdp_core.c |  1 -
 .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c   | 37 +++------------
 .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  3 --
 .../platform/mtk-vcodec/mtk_vcodec_enc.c      |  1 -
 .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c   | 44 +++---------------
 drivers/memory/mtk-smi.c                      | 14 ------
 include/soc/mediatek/smi.h                    | 20 ---------
 28 files changed, 90 insertions(+), 316 deletions(-)

-- 
2.18.0



_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 00/12] Clean up "mediatek,larb"
@ 2021-09-29  1:37 ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich

MediaTek IOMMU block diagram always like below:

        M4U
         |
    smi-common
         |
  -------------
  |         |  ...
  |         |
larb1     larb2
  |         |
vdec       venc

All the consumer connect with smi-larb, then connect with smi-common.

When the consumer works, it should enable the smi-larb's power which also
need enable the smi-common's power firstly.

Thus, Firstly, use the device link connect the consumer and the
smi-larbs. then add device link between the smi-larb and smi-common.

After adding the device_link, then "mediatek,larb" property can be removed.
the iommu consumer don't need call the mtk_smi_larb_get/put to enable
the power and clock of smi-larb and smi-common.

About the MM dt-binding/dtsi patches, I guess they should go together, thus
I don't split them for each a MM module and each a SoC.

Base on a jpeg dtbing patchset[1] that already got the necessary R-b.

[1] https://lore.kernel.org/linux-mediatek/20210702102304.3346429-1-hsinyi@chromium.org/

Change notes:
v8: 1) Rebase on v5.15-rc1.
    2) Don't rebase the below mdp patchset that may still need more discuss.
    https://lore.kernel.org/linux-mediatek/20210709022324.1607884-1-eizan@chromium.org/
    3) Add Frank's Tested-by. Remove Dafna's Tested-by as he requested.

v7: https://lore.kernel.org/linux-mediatek/20210730025238.22456-1-yong.wu@mediatek.com/
    1) Fix a arm32 boot fail issue. reported from Frank.
    2) Add a return fail in the mtk drm. suggested by Dafna.

v6: https://lore.kernel.org/linux-mediatek/20210714025626.5528-1-yong.wu@mediatek.com/
    1) rebase on v5.14-rc1.
    2) Fix the issue commented in v5 from Dafna and Hsin-Yi.
    3) Remove the patches about using pm_runtime_resume_and_get since they have
       already been merged by other patches.

v5: https://lore.kernel.org/linux-mediatek/20210410091128.31823-1-yong.wu@mediatek.com/
    1) Base v5.12-rc2.
    2) Remove changing the mtk-iommu to module_platform_driver patch, It have already been a
    independent patch.

v4: https://lore.kernel.org/linux-mediatek/1590826218-23653-1-git-send-email-yong.wu@mediatek.com/ 
    base on v5.7-rc1.
  1) Move drm PM patch before smi patchs.
  2) Change builtin_platform_driver to module_platform_driver since we may need
     build as module.
  3) Rebase many patchset as above.

v3: https://lore.kernel.org/linux-iommu/1567503456-24725-1-git-send-email-yong.wu@mediatek.com/
    1) rebase on v5.3-rc1 and the latest mt8183 patchset.
    2) Use device_is_bound to check whether the driver is ready from Matthias.    
    3) Add DL_FLAG_STATELESS flag when calling device_link_add and explain the
   reason in the commit message[3/14].
    4) Add a display patch[12/14] into this series. otherwise it may affect
   display HW fastlogo even though it don't happen in mt8183.
   
v2: https://lore.kernel.org/linux-iommu/1560171313-28299-1-git-send-email-yong.wu@mediatek.com/
   1) rebase on v5.2-rc1.
   2) Move adding device_link between the consumer and smi-larb into
iommu_add_device from Robin.
   3) add DL_FLAG_AUTOREMOVE_CONSUMER even though the smi is built-in from Evan.
   4) Remove the shutdown callback in iommu.   

v1: https://lore.kernel.org/linux-iommu/1546318276-18993-1-git-send-email-yong.wu@mediatek.com/

Yong Wu (11):
  dt-binding: mediatek: Get rid of mediatek, larb for multimedia HW
  iommu/mediatek-v1: Free the existed fwspec if the master dev already
    has
  iommu/mediatek: Add probe_defer for smi-larb
  iommu/mediatek: Add device_link between the consumer and the larb
    devices
  media: mtk-jpeg: Get rid of mtk_smi_larb_get/put
  media: mtk-mdp: Get rid of mtk_smi_larb_get/put
  drm/mediatek: Get rid of mtk_smi_larb_get/put
  media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
  memory: mtk-smi: Get rid of mtk_smi_larb_get/put
  arm: dts: mediatek: Get rid of mediatek,larb for MM nodes
  arm64: dts: mediatek: Get rid of mediatek,larb for MM nodes

Yongqiang Niu (1):
  drm/mediatek: Add pm runtime support for ovl and rdma

 .../display/mediatek/mediatek,disp.txt        |  9 ----
 .../bindings/media/mediatek-jpeg-decoder.yaml |  9 ----
 .../bindings/media/mediatek-jpeg-encoder.yaml |  9 ----
 .../bindings/media/mediatek-mdp.txt           |  8 ----
 .../bindings/media/mediatek-vcodec.txt        |  4 --
 arch/arm/boot/dts/mt2701.dtsi                 |  2 -
 arch/arm/boot/dts/mt7623n.dtsi                |  5 ---
 arch/arm64/boot/dts/mediatek/mt8173.dtsi      | 16 -------
 arch/arm64/boot/dts/mediatek/mt8183.dtsi      |  6 ---
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c       |  8 +++-
 drivers/gpu/drm/mediatek/mtk_disp_rdma.c      |  9 +++-
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c       | 15 ++++---
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c   | 36 +--------------
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h   |  1 -
 drivers/gpu/drm/mediatek/mtk_drm_drv.c        |  5 +--
 drivers/iommu/mtk_iommu.c                     | 24 +++++++++-
 drivers/iommu/mtk_iommu_v1.c                  | 31 ++++++++++++-
 .../media/platform/mtk-jpeg/mtk_jpeg_core.c   | 45 +------------------
 .../media/platform/mtk-jpeg/mtk_jpeg_core.h   |  2 -
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.c | 40 -----------------
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.h |  2 -
 drivers/media/platform/mtk-mdp/mtk_mdp_core.c |  1 -
 .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c   | 37 +++------------
 .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  3 --
 .../platform/mtk-vcodec/mtk_vcodec_enc.c      |  1 -
 .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c   | 44 +++---------------
 drivers/memory/mtk-smi.c                      | 14 ------
 include/soc/mediatek/smi.h                    | 20 ---------
 28 files changed, 90 insertions(+), 316 deletions(-)

-- 
2.18.0



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 01/12] dt-binding: mediatek: Get rid of mediatek, larb for multimedia HW
  2021-09-29  1:37 ` Yong Wu
                     ` (2 preceding siblings ...)
  (?)
@ 2021-09-29  1:37   ` Yong Wu
  -1 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich

After adding device_link between the consumer with the smi-larbs,
if the consumer call its owner pm_runtime_get(_sync), the
pm_runtime_get(_sync) of smi-larb and smi-common will be called
automatically. Thus, the consumer don't need the property.

And IOMMU also know which larb this consumer connects with from
iommu id in the "iommus=" property.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
---
 .../bindings/display/mediatek/mediatek,disp.txt          | 9 ---------
 .../devicetree/bindings/media/mediatek-jpeg-decoder.yaml | 9 ---------
 .../devicetree/bindings/media/mediatek-jpeg-encoder.yaml | 9 ---------
 Documentation/devicetree/bindings/media/mediatek-mdp.txt | 8 --------
 .../devicetree/bindings/media/mediatek-vcodec.txt        | 4 ----
 5 files changed, 39 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
index fbb59c9ddda6..867bd82e2f03 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
@@ -61,8 +61,6 @@ Required properties (DMA function blocks):
 	"mediatek,<chip>-disp-rdma"
 	"mediatek,<chip>-disp-wdma"
   the supported chips are mt2701, mt8167 and mt8173.
-- larb: Should contain a phandle pointing to the local arbiter device as defined
-  in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
 - iommus: Should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
   for details.
@@ -91,7 +89,6 @@ ovl0: ovl@1400c000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_OVL0>;
 	iommus = <&iommu M4U_PORT_DISP_OVL0>;
-	mediatek,larb = <&larb0>;
 };
 
 ovl1: ovl@1400d000 {
@@ -101,7 +98,6 @@ ovl1: ovl@1400d000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_OVL1>;
 	iommus = <&iommu M4U_PORT_DISP_OVL1>;
-	mediatek,larb = <&larb4>;
 };
 
 rdma0: rdma@1400e000 {
@@ -111,7 +107,6 @@ rdma0: rdma@1400e000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_RDMA0>;
 	iommus = <&iommu M4U_PORT_DISP_RDMA0>;
-	mediatek,larb = <&larb0>;
 	mediatek,rdma-fifosize = <8192>;
 };
 
@@ -122,7 +117,6 @@ rdma1: rdma@1400f000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_RDMA1>;
 	iommus = <&iommu M4U_PORT_DISP_RDMA1>;
-	mediatek,larb = <&larb4>;
 };
 
 rdma2: rdma@14010000 {
@@ -132,7 +126,6 @@ rdma2: rdma@14010000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_RDMA2>;
 	iommus = <&iommu M4U_PORT_DISP_RDMA2>;
-	mediatek,larb = <&larb4>;
 };
 
 wdma0: wdma@14011000 {
@@ -142,7 +135,6 @@ wdma0: wdma@14011000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_WDMA0>;
 	iommus = <&iommu M4U_PORT_DISP_WDMA0>;
-	mediatek,larb = <&larb0>;
 };
 
 wdma1: wdma@14012000 {
@@ -152,7 +144,6 @@ wdma1: wdma@14012000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_WDMA1>;
 	iommus = <&iommu M4U_PORT_DISP_WDMA1>;
-	mediatek,larb = <&larb4>;
 };
 
 color0: color@14013000 {
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
index 9b87f036f178..052e752157b4 100644
--- a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
@@ -42,13 +42,6 @@ properties:
   power-domains:
     maxItems: 1
 
-  mediatek,larb:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
-    description: |
-      Must contain the local arbiters in the current Socs, see
-      Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-      for details.
-
   iommus:
     maxItems: 2
     description: |
@@ -63,7 +56,6 @@ required:
   - clocks
   - clock-names
   - power-domains
-  - mediatek,larb
   - iommus
 
 additionalProperties: false
@@ -83,7 +75,6 @@ examples:
       clock-names = "jpgdec-smi",
                     "jpgdec";
       power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-      mediatek,larb = <&larb2>;
       iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
                <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
     };
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
index fcd9b829e036..8bfdfdfaba59 100644
--- a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
@@ -35,13 +35,6 @@ properties:
   power-domains:
     maxItems: 1
 
-  mediatek,larb:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
-    description: |
-      Must contain the local arbiters in the current Socs, see
-      Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-      for details.
-
   iommus:
     maxItems: 2
     description: |
@@ -56,7 +49,6 @@ required:
   - clocks
   - clock-names
   - power-domains
-  - mediatek,larb
   - iommus
 
 additionalProperties: false
@@ -75,7 +67,6 @@ examples:
       clocks =  <&imgsys CLK_IMG_VENC>;
       clock-names = "jpgenc";
       power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-      mediatek,larb = <&larb2>;
       iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
                <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
     };
diff --git a/Documentation/devicetree/bindings/media/mediatek-mdp.txt b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
index caa24943da33..53ef26e2c857 100644
--- a/Documentation/devicetree/bindings/media/mediatek-mdp.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
@@ -27,9 +27,6 @@ Required properties (DMA function blocks, child node):
 - iommus: should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
   for details.
-- mediatek,larb: must contain the local arbiters in the current Socs, see
-  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-  for details.
 
 Example:
 	mdp_rdma0: rdma@14001000 {
@@ -40,7 +37,6 @@ Example:
 			 <&mmsys CLK_MM_MUTEX_32K>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_RDMA0>;
-		mediatek,larb = <&larb0>;
 		mediatek,vpu = <&vpu>;
 	};
 
@@ -51,7 +47,6 @@ Example:
 			 <&mmsys CLK_MM_MUTEX_32K>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_RDMA1>;
-		mediatek,larb = <&larb4>;
 	};
 
 	mdp_rsz0: rsz@14003000 {
@@ -81,7 +76,6 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WDMA>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WDMA>;
-		mediatek,larb = <&larb0>;
 	};
 
 	mdp_wrot0: wrot@14007000 {
@@ -90,7 +84,6 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WROT0>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WROT0>;
-		mediatek,larb = <&larb0>;
 	};
 
 	mdp_wrot1: wrot@14008000 {
@@ -99,5 +92,4 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WROT1>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WROT1>;
-		mediatek,larb = <&larb4>;
 	};
diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
index ad1321e5a22d..71237355cc7e 100644
--- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
@@ -13,7 +13,6 @@ Required properties:
 - reg : Physical base address of the video codec registers and length of
   memory mapped region.
 - interrupts : interrupt number to the cpu.
-- mediatek,larb : must contain the local arbiters in the current Socs.
 - clocks : list of clock specifiers, corresponding to entries in
   the clock-names property.
 - clock-names: avc encoder must contain "venc_sel", vp8 encoder must
@@ -46,7 +45,6 @@ vcodec_dec: vcodec@16000000 {
           <0 0x16027800 0 0x800>,   /*VP8_VL*/
           <0 0x16028400 0 0x400>;   /*VP9_VD*/
     interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
-    mediatek,larb = <&larb1>;
     iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
              <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
              <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
@@ -99,7 +97,6 @@ vcodec_enc_avc: vcodec@18002000 {
              <&iommu M4U_PORT_VENC_REF_CHROMA>,
              <&iommu M4U_PORT_VENC_NBM_RDMA>,
              <&iommu M4U_PORT_VENC_NBM_WDMA>;
-    mediatek,larb = <&larb3>;
     mediatek,vpu = <&vpu>;
     clocks = <&topckgen CLK_TOP_VENC_SEL>;
     clock-names = "venc_sel";
@@ -120,7 +117,6 @@ vcodec_enc_vp8: vcodec@19002000 {
              <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
              <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
              <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
-    mediatek,larb = <&larb5>;
     mediatek,vpu = <&vpu>;
     clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
     clock-names = "venc_lt_sel";
-- 
2.18.0


^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 01/12] dt-binding: mediatek: Get rid of mediatek, larb for multimedia HW
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Dafna Hirschfeld, Chun-Kuang Hu, Will Deacon, dri-devel,
	anthony.huang, youlin.pei, Evan Green, Eizan Miyamoto,
	Matthias Kaehlcke, linux-arm-kernel, linux-media, devicetree,
	Philipp Zabel, Frank Wunderlich, yi.kuo, linux-mediatek,
	Hsin-Yi Wang, Tiffany Lin, anan.sun, srv_heupstream, acourbot,
	linux-kernel, iommu, Daniel Vetter, Robin Murphy

After adding device_link between the consumer with the smi-larbs,
if the consumer call its owner pm_runtime_get(_sync), the
pm_runtime_get(_sync) of smi-larb and smi-common will be called
automatically. Thus, the consumer don't need the property.

And IOMMU also know which larb this consumer connects with from
iommu id in the "iommus=" property.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
---
 .../bindings/display/mediatek/mediatek,disp.txt          | 9 ---------
 .../devicetree/bindings/media/mediatek-jpeg-decoder.yaml | 9 ---------
 .../devicetree/bindings/media/mediatek-jpeg-encoder.yaml | 9 ---------
 Documentation/devicetree/bindings/media/mediatek-mdp.txt | 8 --------
 .../devicetree/bindings/media/mediatek-vcodec.txt        | 4 ----
 5 files changed, 39 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
index fbb59c9ddda6..867bd82e2f03 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
@@ -61,8 +61,6 @@ Required properties (DMA function blocks):
 	"mediatek,<chip>-disp-rdma"
 	"mediatek,<chip>-disp-wdma"
   the supported chips are mt2701, mt8167 and mt8173.
-- larb: Should contain a phandle pointing to the local arbiter device as defined
-  in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
 - iommus: Should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
   for details.
@@ -91,7 +89,6 @@ ovl0: ovl@1400c000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_OVL0>;
 	iommus = <&iommu M4U_PORT_DISP_OVL0>;
-	mediatek,larb = <&larb0>;
 };
 
 ovl1: ovl@1400d000 {
@@ -101,7 +98,6 @@ ovl1: ovl@1400d000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_OVL1>;
 	iommus = <&iommu M4U_PORT_DISP_OVL1>;
-	mediatek,larb = <&larb4>;
 };
 
 rdma0: rdma@1400e000 {
@@ -111,7 +107,6 @@ rdma0: rdma@1400e000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_RDMA0>;
 	iommus = <&iommu M4U_PORT_DISP_RDMA0>;
-	mediatek,larb = <&larb0>;
 	mediatek,rdma-fifosize = <8192>;
 };
 
@@ -122,7 +117,6 @@ rdma1: rdma@1400f000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_RDMA1>;
 	iommus = <&iommu M4U_PORT_DISP_RDMA1>;
-	mediatek,larb = <&larb4>;
 };
 
 rdma2: rdma@14010000 {
@@ -132,7 +126,6 @@ rdma2: rdma@14010000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_RDMA2>;
 	iommus = <&iommu M4U_PORT_DISP_RDMA2>;
-	mediatek,larb = <&larb4>;
 };
 
 wdma0: wdma@14011000 {
@@ -142,7 +135,6 @@ wdma0: wdma@14011000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_WDMA0>;
 	iommus = <&iommu M4U_PORT_DISP_WDMA0>;
-	mediatek,larb = <&larb0>;
 };
 
 wdma1: wdma@14012000 {
@@ -152,7 +144,6 @@ wdma1: wdma@14012000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_WDMA1>;
 	iommus = <&iommu M4U_PORT_DISP_WDMA1>;
-	mediatek,larb = <&larb4>;
 };
 
 color0: color@14013000 {
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
index 9b87f036f178..052e752157b4 100644
--- a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
@@ -42,13 +42,6 @@ properties:
   power-domains:
     maxItems: 1
 
-  mediatek,larb:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
-    description: |
-      Must contain the local arbiters in the current Socs, see
-      Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-      for details.
-
   iommus:
     maxItems: 2
     description: |
@@ -63,7 +56,6 @@ required:
   - clocks
   - clock-names
   - power-domains
-  - mediatek,larb
   - iommus
 
 additionalProperties: false
@@ -83,7 +75,6 @@ examples:
       clock-names = "jpgdec-smi",
                     "jpgdec";
       power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-      mediatek,larb = <&larb2>;
       iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
                <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
     };
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
index fcd9b829e036..8bfdfdfaba59 100644
--- a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
@@ -35,13 +35,6 @@ properties:
   power-domains:
     maxItems: 1
 
-  mediatek,larb:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
-    description: |
-      Must contain the local arbiters in the current Socs, see
-      Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-      for details.
-
   iommus:
     maxItems: 2
     description: |
@@ -56,7 +49,6 @@ required:
   - clocks
   - clock-names
   - power-domains
-  - mediatek,larb
   - iommus
 
 additionalProperties: false
@@ -75,7 +67,6 @@ examples:
       clocks =  <&imgsys CLK_IMG_VENC>;
       clock-names = "jpgenc";
       power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-      mediatek,larb = <&larb2>;
       iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
                <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
     };
diff --git a/Documentation/devicetree/bindings/media/mediatek-mdp.txt b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
index caa24943da33..53ef26e2c857 100644
--- a/Documentation/devicetree/bindings/media/mediatek-mdp.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
@@ -27,9 +27,6 @@ Required properties (DMA function blocks, child node):
 - iommus: should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
   for details.
-- mediatek,larb: must contain the local arbiters in the current Socs, see
-  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-  for details.
 
 Example:
 	mdp_rdma0: rdma@14001000 {
@@ -40,7 +37,6 @@ Example:
 			 <&mmsys CLK_MM_MUTEX_32K>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_RDMA0>;
-		mediatek,larb = <&larb0>;
 		mediatek,vpu = <&vpu>;
 	};
 
@@ -51,7 +47,6 @@ Example:
 			 <&mmsys CLK_MM_MUTEX_32K>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_RDMA1>;
-		mediatek,larb = <&larb4>;
 	};
 
 	mdp_rsz0: rsz@14003000 {
@@ -81,7 +76,6 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WDMA>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WDMA>;
-		mediatek,larb = <&larb0>;
 	};
 
 	mdp_wrot0: wrot@14007000 {
@@ -90,7 +84,6 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WROT0>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WROT0>;
-		mediatek,larb = <&larb0>;
 	};
 
 	mdp_wrot1: wrot@14008000 {
@@ -99,5 +92,4 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WROT1>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WROT1>;
-		mediatek,larb = <&larb4>;
 	};
diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
index ad1321e5a22d..71237355cc7e 100644
--- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
@@ -13,7 +13,6 @@ Required properties:
 - reg : Physical base address of the video codec registers and length of
   memory mapped region.
 - interrupts : interrupt number to the cpu.
-- mediatek,larb : must contain the local arbiters in the current Socs.
 - clocks : list of clock specifiers, corresponding to entries in
   the clock-names property.
 - clock-names: avc encoder must contain "venc_sel", vp8 encoder must
@@ -46,7 +45,6 @@ vcodec_dec: vcodec@16000000 {
           <0 0x16027800 0 0x800>,   /*VP8_VL*/
           <0 0x16028400 0 0x400>;   /*VP9_VD*/
     interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
-    mediatek,larb = <&larb1>;
     iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
              <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
              <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
@@ -99,7 +97,6 @@ vcodec_enc_avc: vcodec@18002000 {
              <&iommu M4U_PORT_VENC_REF_CHROMA>,
              <&iommu M4U_PORT_VENC_NBM_RDMA>,
              <&iommu M4U_PORT_VENC_NBM_WDMA>;
-    mediatek,larb = <&larb3>;
     mediatek,vpu = <&vpu>;
     clocks = <&topckgen CLK_TOP_VENC_SEL>;
     clock-names = "venc_sel";
@@ -120,7 +117,6 @@ vcodec_enc_vp8: vcodec@19002000 {
              <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
              <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
              <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
-    mediatek,larb = <&larb5>;
     mediatek,vpu = <&vpu>;
     clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
     clock-names = "venc_lt_sel";
-- 
2.18.0

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 01/12] dt-binding: mediatek: Get rid of mediatek, larb for multimedia HW
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich

After adding device_link between the consumer with the smi-larbs,
if the consumer call its owner pm_runtime_get(_sync), the
pm_runtime_get(_sync) of smi-larb and smi-common will be called
automatically. Thus, the consumer don't need the property.

And IOMMU also know which larb this consumer connects with from
iommu id in the "iommus=" property.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
---
 .../bindings/display/mediatek/mediatek,disp.txt          | 9 ---------
 .../devicetree/bindings/media/mediatek-jpeg-decoder.yaml | 9 ---------
 .../devicetree/bindings/media/mediatek-jpeg-encoder.yaml | 9 ---------
 Documentation/devicetree/bindings/media/mediatek-mdp.txt | 8 --------
 .../devicetree/bindings/media/mediatek-vcodec.txt        | 4 ----
 5 files changed, 39 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
index fbb59c9ddda6..867bd82e2f03 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
@@ -61,8 +61,6 @@ Required properties (DMA function blocks):
 	"mediatek,<chip>-disp-rdma"
 	"mediatek,<chip>-disp-wdma"
   the supported chips are mt2701, mt8167 and mt8173.
-- larb: Should contain a phandle pointing to the local arbiter device as defined
-  in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
 - iommus: Should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
   for details.
@@ -91,7 +89,6 @@ ovl0: ovl@1400c000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_OVL0>;
 	iommus = <&iommu M4U_PORT_DISP_OVL0>;
-	mediatek,larb = <&larb0>;
 };
 
 ovl1: ovl@1400d000 {
@@ -101,7 +98,6 @@ ovl1: ovl@1400d000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_OVL1>;
 	iommus = <&iommu M4U_PORT_DISP_OVL1>;
-	mediatek,larb = <&larb4>;
 };
 
 rdma0: rdma@1400e000 {
@@ -111,7 +107,6 @@ rdma0: rdma@1400e000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_RDMA0>;
 	iommus = <&iommu M4U_PORT_DISP_RDMA0>;
-	mediatek,larb = <&larb0>;
 	mediatek,rdma-fifosize = <8192>;
 };
 
@@ -122,7 +117,6 @@ rdma1: rdma@1400f000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_RDMA1>;
 	iommus = <&iommu M4U_PORT_DISP_RDMA1>;
-	mediatek,larb = <&larb4>;
 };
 
 rdma2: rdma@14010000 {
@@ -132,7 +126,6 @@ rdma2: rdma@14010000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_RDMA2>;
 	iommus = <&iommu M4U_PORT_DISP_RDMA2>;
-	mediatek,larb = <&larb4>;
 };
 
 wdma0: wdma@14011000 {
@@ -142,7 +135,6 @@ wdma0: wdma@14011000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_WDMA0>;
 	iommus = <&iommu M4U_PORT_DISP_WDMA0>;
-	mediatek,larb = <&larb0>;
 };
 
 wdma1: wdma@14012000 {
@@ -152,7 +144,6 @@ wdma1: wdma@14012000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_WDMA1>;
 	iommus = <&iommu M4U_PORT_DISP_WDMA1>;
-	mediatek,larb = <&larb4>;
 };
 
 color0: color@14013000 {
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
index 9b87f036f178..052e752157b4 100644
--- a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
@@ -42,13 +42,6 @@ properties:
   power-domains:
     maxItems: 1
 
-  mediatek,larb:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
-    description: |
-      Must contain the local arbiters in the current Socs, see
-      Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-      for details.
-
   iommus:
     maxItems: 2
     description: |
@@ -63,7 +56,6 @@ required:
   - clocks
   - clock-names
   - power-domains
-  - mediatek,larb
   - iommus
 
 additionalProperties: false
@@ -83,7 +75,6 @@ examples:
       clock-names = "jpgdec-smi",
                     "jpgdec";
       power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-      mediatek,larb = <&larb2>;
       iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
                <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
     };
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
index fcd9b829e036..8bfdfdfaba59 100644
--- a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
@@ -35,13 +35,6 @@ properties:
   power-domains:
     maxItems: 1
 
-  mediatek,larb:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
-    description: |
-      Must contain the local arbiters in the current Socs, see
-      Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-      for details.
-
   iommus:
     maxItems: 2
     description: |
@@ -56,7 +49,6 @@ required:
   - clocks
   - clock-names
   - power-domains
-  - mediatek,larb
   - iommus
 
 additionalProperties: false
@@ -75,7 +67,6 @@ examples:
       clocks =  <&imgsys CLK_IMG_VENC>;
       clock-names = "jpgenc";
       power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-      mediatek,larb = <&larb2>;
       iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
                <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
     };
diff --git a/Documentation/devicetree/bindings/media/mediatek-mdp.txt b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
index caa24943da33..53ef26e2c857 100644
--- a/Documentation/devicetree/bindings/media/mediatek-mdp.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
@@ -27,9 +27,6 @@ Required properties (DMA function blocks, child node):
 - iommus: should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
   for details.
-- mediatek,larb: must contain the local arbiters in the current Socs, see
-  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-  for details.
 
 Example:
 	mdp_rdma0: rdma@14001000 {
@@ -40,7 +37,6 @@ Example:
 			 <&mmsys CLK_MM_MUTEX_32K>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_RDMA0>;
-		mediatek,larb = <&larb0>;
 		mediatek,vpu = <&vpu>;
 	};
 
@@ -51,7 +47,6 @@ Example:
 			 <&mmsys CLK_MM_MUTEX_32K>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_RDMA1>;
-		mediatek,larb = <&larb4>;
 	};
 
 	mdp_rsz0: rsz@14003000 {
@@ -81,7 +76,6 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WDMA>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WDMA>;
-		mediatek,larb = <&larb0>;
 	};
 
 	mdp_wrot0: wrot@14007000 {
@@ -90,7 +84,6 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WROT0>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WROT0>;
-		mediatek,larb = <&larb0>;
 	};
 
 	mdp_wrot1: wrot@14008000 {
@@ -99,5 +92,4 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WROT1>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WROT1>;
-		mediatek,larb = <&larb4>;
 	};
diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
index ad1321e5a22d..71237355cc7e 100644
--- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
@@ -13,7 +13,6 @@ Required properties:
 - reg : Physical base address of the video codec registers and length of
   memory mapped region.
 - interrupts : interrupt number to the cpu.
-- mediatek,larb : must contain the local arbiters in the current Socs.
 - clocks : list of clock specifiers, corresponding to entries in
   the clock-names property.
 - clock-names: avc encoder must contain "venc_sel", vp8 encoder must
@@ -46,7 +45,6 @@ vcodec_dec: vcodec@16000000 {
           <0 0x16027800 0 0x800>,   /*VP8_VL*/
           <0 0x16028400 0 0x400>;   /*VP9_VD*/
     interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
-    mediatek,larb = <&larb1>;
     iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
              <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
              <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
@@ -99,7 +97,6 @@ vcodec_enc_avc: vcodec@18002000 {
              <&iommu M4U_PORT_VENC_REF_CHROMA>,
              <&iommu M4U_PORT_VENC_NBM_RDMA>,
              <&iommu M4U_PORT_VENC_NBM_WDMA>;
-    mediatek,larb = <&larb3>;
     mediatek,vpu = <&vpu>;
     clocks = <&topckgen CLK_TOP_VENC_SEL>;
     clock-names = "venc_sel";
@@ -120,7 +117,6 @@ vcodec_enc_vp8: vcodec@19002000 {
              <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
              <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
              <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
-    mediatek,larb = <&larb5>;
     mediatek,vpu = <&vpu>;
     clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
     clock-names = "venc_lt_sel";
-- 
2.18.0


^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 01/12] dt-binding: mediatek: Get rid of mediatek, larb for multimedia HW
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich

After adding device_link between the consumer with the smi-larbs,
if the consumer call its owner pm_runtime_get(_sync), the
pm_runtime_get(_sync) of smi-larb and smi-common will be called
automatically. Thus, the consumer don't need the property.

And IOMMU also know which larb this consumer connects with from
iommu id in the "iommus=" property.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
---
 .../bindings/display/mediatek/mediatek,disp.txt          | 9 ---------
 .../devicetree/bindings/media/mediatek-jpeg-decoder.yaml | 9 ---------
 .../devicetree/bindings/media/mediatek-jpeg-encoder.yaml | 9 ---------
 Documentation/devicetree/bindings/media/mediatek-mdp.txt | 8 --------
 .../devicetree/bindings/media/mediatek-vcodec.txt        | 4 ----
 5 files changed, 39 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
index fbb59c9ddda6..867bd82e2f03 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
@@ -61,8 +61,6 @@ Required properties (DMA function blocks):
 	"mediatek,<chip>-disp-rdma"
 	"mediatek,<chip>-disp-wdma"
   the supported chips are mt2701, mt8167 and mt8173.
-- larb: Should contain a phandle pointing to the local arbiter device as defined
-  in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
 - iommus: Should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
   for details.
@@ -91,7 +89,6 @@ ovl0: ovl@1400c000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_OVL0>;
 	iommus = <&iommu M4U_PORT_DISP_OVL0>;
-	mediatek,larb = <&larb0>;
 };
 
 ovl1: ovl@1400d000 {
@@ -101,7 +98,6 @@ ovl1: ovl@1400d000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_OVL1>;
 	iommus = <&iommu M4U_PORT_DISP_OVL1>;
-	mediatek,larb = <&larb4>;
 };
 
 rdma0: rdma@1400e000 {
@@ -111,7 +107,6 @@ rdma0: rdma@1400e000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_RDMA0>;
 	iommus = <&iommu M4U_PORT_DISP_RDMA0>;
-	mediatek,larb = <&larb0>;
 	mediatek,rdma-fifosize = <8192>;
 };
 
@@ -122,7 +117,6 @@ rdma1: rdma@1400f000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_RDMA1>;
 	iommus = <&iommu M4U_PORT_DISP_RDMA1>;
-	mediatek,larb = <&larb4>;
 };
 
 rdma2: rdma@14010000 {
@@ -132,7 +126,6 @@ rdma2: rdma@14010000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_RDMA2>;
 	iommus = <&iommu M4U_PORT_DISP_RDMA2>;
-	mediatek,larb = <&larb4>;
 };
 
 wdma0: wdma@14011000 {
@@ -142,7 +135,6 @@ wdma0: wdma@14011000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_WDMA0>;
 	iommus = <&iommu M4U_PORT_DISP_WDMA0>;
-	mediatek,larb = <&larb0>;
 };
 
 wdma1: wdma@14012000 {
@@ -152,7 +144,6 @@ wdma1: wdma@14012000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_WDMA1>;
 	iommus = <&iommu M4U_PORT_DISP_WDMA1>;
-	mediatek,larb = <&larb4>;
 };
 
 color0: color@14013000 {
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
index 9b87f036f178..052e752157b4 100644
--- a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
@@ -42,13 +42,6 @@ properties:
   power-domains:
     maxItems: 1
 
-  mediatek,larb:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
-    description: |
-      Must contain the local arbiters in the current Socs, see
-      Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-      for details.
-
   iommus:
     maxItems: 2
     description: |
@@ -63,7 +56,6 @@ required:
   - clocks
   - clock-names
   - power-domains
-  - mediatek,larb
   - iommus
 
 additionalProperties: false
@@ -83,7 +75,6 @@ examples:
       clock-names = "jpgdec-smi",
                     "jpgdec";
       power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-      mediatek,larb = <&larb2>;
       iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
                <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
     };
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
index fcd9b829e036..8bfdfdfaba59 100644
--- a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
@@ -35,13 +35,6 @@ properties:
   power-domains:
     maxItems: 1
 
-  mediatek,larb:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
-    description: |
-      Must contain the local arbiters in the current Socs, see
-      Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-      for details.
-
   iommus:
     maxItems: 2
     description: |
@@ -56,7 +49,6 @@ required:
   - clocks
   - clock-names
   - power-domains
-  - mediatek,larb
   - iommus
 
 additionalProperties: false
@@ -75,7 +67,6 @@ examples:
       clocks =  <&imgsys CLK_IMG_VENC>;
       clock-names = "jpgenc";
       power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-      mediatek,larb = <&larb2>;
       iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
                <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
     };
diff --git a/Documentation/devicetree/bindings/media/mediatek-mdp.txt b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
index caa24943da33..53ef26e2c857 100644
--- a/Documentation/devicetree/bindings/media/mediatek-mdp.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
@@ -27,9 +27,6 @@ Required properties (DMA function blocks, child node):
 - iommus: should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
   for details.
-- mediatek,larb: must contain the local arbiters in the current Socs, see
-  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-  for details.
 
 Example:
 	mdp_rdma0: rdma@14001000 {
@@ -40,7 +37,6 @@ Example:
 			 <&mmsys CLK_MM_MUTEX_32K>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_RDMA0>;
-		mediatek,larb = <&larb0>;
 		mediatek,vpu = <&vpu>;
 	};
 
@@ -51,7 +47,6 @@ Example:
 			 <&mmsys CLK_MM_MUTEX_32K>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_RDMA1>;
-		mediatek,larb = <&larb4>;
 	};
 
 	mdp_rsz0: rsz@14003000 {
@@ -81,7 +76,6 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WDMA>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WDMA>;
-		mediatek,larb = <&larb0>;
 	};
 
 	mdp_wrot0: wrot@14007000 {
@@ -90,7 +84,6 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WROT0>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WROT0>;
-		mediatek,larb = <&larb0>;
 	};
 
 	mdp_wrot1: wrot@14008000 {
@@ -99,5 +92,4 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WROT1>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WROT1>;
-		mediatek,larb = <&larb4>;
 	};
diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
index ad1321e5a22d..71237355cc7e 100644
--- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
@@ -13,7 +13,6 @@ Required properties:
 - reg : Physical base address of the video codec registers and length of
   memory mapped region.
 - interrupts : interrupt number to the cpu.
-- mediatek,larb : must contain the local arbiters in the current Socs.
 - clocks : list of clock specifiers, corresponding to entries in
   the clock-names property.
 - clock-names: avc encoder must contain "venc_sel", vp8 encoder must
@@ -46,7 +45,6 @@ vcodec_dec: vcodec@16000000 {
           <0 0x16027800 0 0x800>,   /*VP8_VL*/
           <0 0x16028400 0 0x400>;   /*VP9_VD*/
     interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
-    mediatek,larb = <&larb1>;
     iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
              <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
              <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
@@ -99,7 +97,6 @@ vcodec_enc_avc: vcodec@18002000 {
              <&iommu M4U_PORT_VENC_REF_CHROMA>,
              <&iommu M4U_PORT_VENC_NBM_RDMA>,
              <&iommu M4U_PORT_VENC_NBM_WDMA>;
-    mediatek,larb = <&larb3>;
     mediatek,vpu = <&vpu>;
     clocks = <&topckgen CLK_TOP_VENC_SEL>;
     clock-names = "venc_sel";
@@ -120,7 +117,6 @@ vcodec_enc_vp8: vcodec@19002000 {
              <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
              <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
              <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
-    mediatek,larb = <&larb5>;
     mediatek,vpu = <&vpu>;
     clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
     clock-names = "venc_lt_sel";
-- 
2.18.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 01/12] dt-binding: mediatek: Get rid of mediatek, larb for multimedia HW
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich

After adding device_link between the consumer with the smi-larbs,
if the consumer call its owner pm_runtime_get(_sync), the
pm_runtime_get(_sync) of smi-larb and smi-common will be called
automatically. Thus, the consumer don't need the property.

And IOMMU also know which larb this consumer connects with from
iommu id in the "iommus=" property.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
---
 .../bindings/display/mediatek/mediatek,disp.txt          | 9 ---------
 .../devicetree/bindings/media/mediatek-jpeg-decoder.yaml | 9 ---------
 .../devicetree/bindings/media/mediatek-jpeg-encoder.yaml | 9 ---------
 Documentation/devicetree/bindings/media/mediatek-mdp.txt | 8 --------
 .../devicetree/bindings/media/mediatek-vcodec.txt        | 4 ----
 5 files changed, 39 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
index fbb59c9ddda6..867bd82e2f03 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
@@ -61,8 +61,6 @@ Required properties (DMA function blocks):
 	"mediatek,<chip>-disp-rdma"
 	"mediatek,<chip>-disp-wdma"
   the supported chips are mt2701, mt8167 and mt8173.
-- larb: Should contain a phandle pointing to the local arbiter device as defined
-  in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
 - iommus: Should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
   for details.
@@ -91,7 +89,6 @@ ovl0: ovl@1400c000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_OVL0>;
 	iommus = <&iommu M4U_PORT_DISP_OVL0>;
-	mediatek,larb = <&larb0>;
 };
 
 ovl1: ovl@1400d000 {
@@ -101,7 +98,6 @@ ovl1: ovl@1400d000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_OVL1>;
 	iommus = <&iommu M4U_PORT_DISP_OVL1>;
-	mediatek,larb = <&larb4>;
 };
 
 rdma0: rdma@1400e000 {
@@ -111,7 +107,6 @@ rdma0: rdma@1400e000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_RDMA0>;
 	iommus = <&iommu M4U_PORT_DISP_RDMA0>;
-	mediatek,larb = <&larb0>;
 	mediatek,rdma-fifosize = <8192>;
 };
 
@@ -122,7 +117,6 @@ rdma1: rdma@1400f000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_RDMA1>;
 	iommus = <&iommu M4U_PORT_DISP_RDMA1>;
-	mediatek,larb = <&larb4>;
 };
 
 rdma2: rdma@14010000 {
@@ -132,7 +126,6 @@ rdma2: rdma@14010000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_RDMA2>;
 	iommus = <&iommu M4U_PORT_DISP_RDMA2>;
-	mediatek,larb = <&larb4>;
 };
 
 wdma0: wdma@14011000 {
@@ -142,7 +135,6 @@ wdma0: wdma@14011000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_WDMA0>;
 	iommus = <&iommu M4U_PORT_DISP_WDMA0>;
-	mediatek,larb = <&larb0>;
 };
 
 wdma1: wdma@14012000 {
@@ -152,7 +144,6 @@ wdma1: wdma@14012000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_WDMA1>;
 	iommus = <&iommu M4U_PORT_DISP_WDMA1>;
-	mediatek,larb = <&larb4>;
 };
 
 color0: color@14013000 {
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
index 9b87f036f178..052e752157b4 100644
--- a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
@@ -42,13 +42,6 @@ properties:
   power-domains:
     maxItems: 1
 
-  mediatek,larb:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
-    description: |
-      Must contain the local arbiters in the current Socs, see
-      Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-      for details.
-
   iommus:
     maxItems: 2
     description: |
@@ -63,7 +56,6 @@ required:
   - clocks
   - clock-names
   - power-domains
-  - mediatek,larb
   - iommus
 
 additionalProperties: false
@@ -83,7 +75,6 @@ examples:
       clock-names = "jpgdec-smi",
                     "jpgdec";
       power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-      mediatek,larb = <&larb2>;
       iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
                <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
     };
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
index fcd9b829e036..8bfdfdfaba59 100644
--- a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
@@ -35,13 +35,6 @@ properties:
   power-domains:
     maxItems: 1
 
-  mediatek,larb:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
-    description: |
-      Must contain the local arbiters in the current Socs, see
-      Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-      for details.
-
   iommus:
     maxItems: 2
     description: |
@@ -56,7 +49,6 @@ required:
   - clocks
   - clock-names
   - power-domains
-  - mediatek,larb
   - iommus
 
 additionalProperties: false
@@ -75,7 +67,6 @@ examples:
       clocks =  <&imgsys CLK_IMG_VENC>;
       clock-names = "jpgenc";
       power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-      mediatek,larb = <&larb2>;
       iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
                <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
     };
diff --git a/Documentation/devicetree/bindings/media/mediatek-mdp.txt b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
index caa24943da33..53ef26e2c857 100644
--- a/Documentation/devicetree/bindings/media/mediatek-mdp.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
@@ -27,9 +27,6 @@ Required properties (DMA function blocks, child node):
 - iommus: should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
   for details.
-- mediatek,larb: must contain the local arbiters in the current Socs, see
-  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-  for details.
 
 Example:
 	mdp_rdma0: rdma@14001000 {
@@ -40,7 +37,6 @@ Example:
 			 <&mmsys CLK_MM_MUTEX_32K>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_RDMA0>;
-		mediatek,larb = <&larb0>;
 		mediatek,vpu = <&vpu>;
 	};
 
@@ -51,7 +47,6 @@ Example:
 			 <&mmsys CLK_MM_MUTEX_32K>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_RDMA1>;
-		mediatek,larb = <&larb4>;
 	};
 
 	mdp_rsz0: rsz@14003000 {
@@ -81,7 +76,6 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WDMA>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WDMA>;
-		mediatek,larb = <&larb0>;
 	};
 
 	mdp_wrot0: wrot@14007000 {
@@ -90,7 +84,6 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WROT0>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WROT0>;
-		mediatek,larb = <&larb0>;
 	};
 
 	mdp_wrot1: wrot@14008000 {
@@ -99,5 +92,4 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WROT1>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WROT1>;
-		mediatek,larb = <&larb4>;
 	};
diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
index ad1321e5a22d..71237355cc7e 100644
--- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
@@ -13,7 +13,6 @@ Required properties:
 - reg : Physical base address of the video codec registers and length of
   memory mapped region.
 - interrupts : interrupt number to the cpu.
-- mediatek,larb : must contain the local arbiters in the current Socs.
 - clocks : list of clock specifiers, corresponding to entries in
   the clock-names property.
 - clock-names: avc encoder must contain "venc_sel", vp8 encoder must
@@ -46,7 +45,6 @@ vcodec_dec: vcodec@16000000 {
           <0 0x16027800 0 0x800>,   /*VP8_VL*/
           <0 0x16028400 0 0x400>;   /*VP9_VD*/
     interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
-    mediatek,larb = <&larb1>;
     iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
              <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
              <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
@@ -99,7 +97,6 @@ vcodec_enc_avc: vcodec@18002000 {
              <&iommu M4U_PORT_VENC_REF_CHROMA>,
              <&iommu M4U_PORT_VENC_NBM_RDMA>,
              <&iommu M4U_PORT_VENC_NBM_WDMA>;
-    mediatek,larb = <&larb3>;
     mediatek,vpu = <&vpu>;
     clocks = <&topckgen CLK_TOP_VENC_SEL>;
     clock-names = "venc_sel";
@@ -120,7 +117,6 @@ vcodec_enc_vp8: vcodec@19002000 {
              <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
              <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
              <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
-    mediatek,larb = <&larb5>;
     mediatek,vpu = <&vpu>;
     clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
     clock-names = "venc_lt_sel";
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 02/12] iommu/mediatek-v1: Free the existed fwspec if the master dev already has
  2021-09-29  1:37 ` Yong Wu
                     ` (2 preceding siblings ...)
  (?)
@ 2021-09-29  1:37   ` Yong Wu
  -1 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich

When the iommu master device enters of_iommu_xlate, the ops may be
NULL(iommu dev is defered), then it will initialize the fwspec here:

[<c0c9c5bc>] (dev_iommu_fwspec_set) from [<c06bda80>]
(iommu_fwspec_init+0xbc/0xd4)
[<c06bd9c4>] (iommu_fwspec_init) from [<c06c0db4>]
(of_iommu_xlate+0x7c/0x12c)
[<c06c0d38>] (of_iommu_xlate) from [<c06c10e8>]
(of_iommu_configure+0x144/0x1e8)

BUT the mtk_iommu_v1.c only supports arm32, the probing flow still is a bit
weird. We always expect create the fwspec internally. otherwise it will
enter here and return fail.

static int mtk_iommu_create_mapping(struct device *dev,
				    struct of_phandle_args *args)
{
        ...
	if (!fwspec) {
	        ....
	} else if (dev_iommu_fwspec_get(dev)->ops != &mtk_iommu_ops) {
                >>>>>>>>>>Enter here. return fail.<<<<<<<<<<<<
		return -EINVAL;
	}
	...
}

Thus, Free the existed fwspec if the master device already has fwspec.

This issue is reported at:
https://lore.kernel.org/linux-mediatek/trinity-7d9ebdc9-4849-4d93-bfb5-429dcb4ee449-1626253158870@3c-app-gmx-bs01/

Reported-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/iommu/mtk_iommu_v1.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index be22fcf988ce..1467ba1e4417 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -425,6 +425,15 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
 	struct mtk_iommu_data *data;
 	int err, idx = 0;
 
+	/*
+	 * In the deferred case, free the existed fwspec.
+	 * Always initialize the fwspec internally.
+	 */
+	if (fwspec) {
+		iommu_fwspec_free(dev);
+		fwspec = dev_iommu_fwspec_get(dev);
+	}
+
 	while (!of_parse_phandle_with_args(dev->of_node, "iommus",
 					   "#iommu-cells",
 					   idx, &iommu_spec)) {
-- 
2.18.0


^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 02/12] iommu/mediatek-v1: Free the existed fwspec if the master dev already has
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Dafna Hirschfeld, Chun-Kuang Hu, Will Deacon, dri-devel,
	anthony.huang, youlin.pei, Evan Green, Eizan Miyamoto,
	Matthias Kaehlcke, linux-arm-kernel, linux-media, devicetree,
	Philipp Zabel, Frank Wunderlich, yi.kuo, linux-mediatek,
	Hsin-Yi Wang, Tiffany Lin, anan.sun, srv_heupstream, acourbot,
	linux-kernel, iommu, Daniel Vetter, Robin Murphy

When the iommu master device enters of_iommu_xlate, the ops may be
NULL(iommu dev is defered), then it will initialize the fwspec here:

[<c0c9c5bc>] (dev_iommu_fwspec_set) from [<c06bda80>]
(iommu_fwspec_init+0xbc/0xd4)
[<c06bd9c4>] (iommu_fwspec_init) from [<c06c0db4>]
(of_iommu_xlate+0x7c/0x12c)
[<c06c0d38>] (of_iommu_xlate) from [<c06c10e8>]
(of_iommu_configure+0x144/0x1e8)

BUT the mtk_iommu_v1.c only supports arm32, the probing flow still is a bit
weird. We always expect create the fwspec internally. otherwise it will
enter here and return fail.

static int mtk_iommu_create_mapping(struct device *dev,
				    struct of_phandle_args *args)
{
        ...
	if (!fwspec) {
	        ....
	} else if (dev_iommu_fwspec_get(dev)->ops != &mtk_iommu_ops) {
                >>>>>>>>>>Enter here. return fail.<<<<<<<<<<<<
		return -EINVAL;
	}
	...
}

Thus, Free the existed fwspec if the master device already has fwspec.

This issue is reported at:
https://lore.kernel.org/linux-mediatek/trinity-7d9ebdc9-4849-4d93-bfb5-429dcb4ee449-1626253158870@3c-app-gmx-bs01/

Reported-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/iommu/mtk_iommu_v1.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index be22fcf988ce..1467ba1e4417 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -425,6 +425,15 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
 	struct mtk_iommu_data *data;
 	int err, idx = 0;
 
+	/*
+	 * In the deferred case, free the existed fwspec.
+	 * Always initialize the fwspec internally.
+	 */
+	if (fwspec) {
+		iommu_fwspec_free(dev);
+		fwspec = dev_iommu_fwspec_get(dev);
+	}
+
 	while (!of_parse_phandle_with_args(dev->of_node, "iommus",
 					   "#iommu-cells",
 					   idx, &iommu_spec)) {
-- 
2.18.0

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 02/12] iommu/mediatek-v1: Free the existed fwspec if the master dev already has
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich

When the iommu master device enters of_iommu_xlate, the ops may be
NULL(iommu dev is defered), then it will initialize the fwspec here:

[<c0c9c5bc>] (dev_iommu_fwspec_set) from [<c06bda80>]
(iommu_fwspec_init+0xbc/0xd4)
[<c06bd9c4>] (iommu_fwspec_init) from [<c06c0db4>]
(of_iommu_xlate+0x7c/0x12c)
[<c06c0d38>] (of_iommu_xlate) from [<c06c10e8>]
(of_iommu_configure+0x144/0x1e8)

BUT the mtk_iommu_v1.c only supports arm32, the probing flow still is a bit
weird. We always expect create the fwspec internally. otherwise it will
enter here and return fail.

static int mtk_iommu_create_mapping(struct device *dev,
				    struct of_phandle_args *args)
{
        ...
	if (!fwspec) {
	        ....
	} else if (dev_iommu_fwspec_get(dev)->ops != &mtk_iommu_ops) {
                >>>>>>>>>>Enter here. return fail.<<<<<<<<<<<<
		return -EINVAL;
	}
	...
}

Thus, Free the existed fwspec if the master device already has fwspec.

This issue is reported at:
https://lore.kernel.org/linux-mediatek/trinity-7d9ebdc9-4849-4d93-bfb5-429dcb4ee449-1626253158870@3c-app-gmx-bs01/

Reported-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/iommu/mtk_iommu_v1.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index be22fcf988ce..1467ba1e4417 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -425,6 +425,15 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
 	struct mtk_iommu_data *data;
 	int err, idx = 0;
 
+	/*
+	 * In the deferred case, free the existed fwspec.
+	 * Always initialize the fwspec internally.
+	 */
+	if (fwspec) {
+		iommu_fwspec_free(dev);
+		fwspec = dev_iommu_fwspec_get(dev);
+	}
+
 	while (!of_parse_phandle_with_args(dev->of_node, "iommus",
 					   "#iommu-cells",
 					   idx, &iommu_spec)) {
-- 
2.18.0


^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 02/12] iommu/mediatek-v1: Free the existed fwspec if the master dev already has
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich

When the iommu master device enters of_iommu_xlate, the ops may be
NULL(iommu dev is defered), then it will initialize the fwspec here:

[<c0c9c5bc>] (dev_iommu_fwspec_set) from [<c06bda80>]
(iommu_fwspec_init+0xbc/0xd4)
[<c06bd9c4>] (iommu_fwspec_init) from [<c06c0db4>]
(of_iommu_xlate+0x7c/0x12c)
[<c06c0d38>] (of_iommu_xlate) from [<c06c10e8>]
(of_iommu_configure+0x144/0x1e8)

BUT the mtk_iommu_v1.c only supports arm32, the probing flow still is a bit
weird. We always expect create the fwspec internally. otherwise it will
enter here and return fail.

static int mtk_iommu_create_mapping(struct device *dev,
				    struct of_phandle_args *args)
{
        ...
	if (!fwspec) {
	        ....
	} else if (dev_iommu_fwspec_get(dev)->ops != &mtk_iommu_ops) {
                >>>>>>>>>>Enter here. return fail.<<<<<<<<<<<<
		return -EINVAL;
	}
	...
}

Thus, Free the existed fwspec if the master device already has fwspec.

This issue is reported at:
https://lore.kernel.org/linux-mediatek/trinity-7d9ebdc9-4849-4d93-bfb5-429dcb4ee449-1626253158870@3c-app-gmx-bs01/

Reported-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/iommu/mtk_iommu_v1.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index be22fcf988ce..1467ba1e4417 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -425,6 +425,15 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
 	struct mtk_iommu_data *data;
 	int err, idx = 0;
 
+	/*
+	 * In the deferred case, free the existed fwspec.
+	 * Always initialize the fwspec internally.
+	 */
+	if (fwspec) {
+		iommu_fwspec_free(dev);
+		fwspec = dev_iommu_fwspec_get(dev);
+	}
+
 	while (!of_parse_phandle_with_args(dev->of_node, "iommus",
 					   "#iommu-cells",
 					   idx, &iommu_spec)) {
-- 
2.18.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 02/12] iommu/mediatek-v1: Free the existed fwspec if the master dev already has
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich

When the iommu master device enters of_iommu_xlate, the ops may be
NULL(iommu dev is defered), then it will initialize the fwspec here:

[<c0c9c5bc>] (dev_iommu_fwspec_set) from [<c06bda80>]
(iommu_fwspec_init+0xbc/0xd4)
[<c06bd9c4>] (iommu_fwspec_init) from [<c06c0db4>]
(of_iommu_xlate+0x7c/0x12c)
[<c06c0d38>] (of_iommu_xlate) from [<c06c10e8>]
(of_iommu_configure+0x144/0x1e8)

BUT the mtk_iommu_v1.c only supports arm32, the probing flow still is a bit
weird. We always expect create the fwspec internally. otherwise it will
enter here and return fail.

static int mtk_iommu_create_mapping(struct device *dev,
				    struct of_phandle_args *args)
{
        ...
	if (!fwspec) {
	        ....
	} else if (dev_iommu_fwspec_get(dev)->ops != &mtk_iommu_ops) {
                >>>>>>>>>>Enter here. return fail.<<<<<<<<<<<<
		return -EINVAL;
	}
	...
}

Thus, Free the existed fwspec if the master device already has fwspec.

This issue is reported at:
https://lore.kernel.org/linux-mediatek/trinity-7d9ebdc9-4849-4d93-bfb5-429dcb4ee449-1626253158870@3c-app-gmx-bs01/

Reported-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/iommu/mtk_iommu_v1.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index be22fcf988ce..1467ba1e4417 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -425,6 +425,15 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
 	struct mtk_iommu_data *data;
 	int err, idx = 0;
 
+	/*
+	 * In the deferred case, free the existed fwspec.
+	 * Always initialize the fwspec internally.
+	 */
+	if (fwspec) {
+		iommu_fwspec_free(dev);
+		fwspec = dev_iommu_fwspec_get(dev);
+	}
+
 	while (!of_parse_phandle_with_args(dev->of_node, "iommus",
 					   "#iommu-cells",
 					   idx, &iommu_spec)) {
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 03/12] iommu/mediatek: Add probe_defer for smi-larb
  2021-09-29  1:37 ` Yong Wu
                     ` (2 preceding siblings ...)
  (?)
@ 2021-09-29  1:37   ` Yong Wu
  -1 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich

Prepare for adding device_link.

The iommu consumer should use device_link to connect with the
smi-larb(supplier). then the smi-larb should run before the iommu
consumer. Here we delay the iommu driver until the smi driver is ready,
then all the iommu consumers always are after the smi driver.

When there is no this patch, if some consumer drivers run before
smi-larb, the supplier link_status is DL_DEV_NO_DRIVER(0) in the
device_link_add, then device_links_driver_bound will use WARN_ON
to complain that the link_status of supplier is not right.

device_is_bound may be more elegant here. but it is not allowed to
EXPORT from https://lore.kernel.org/patchwork/patch/1334670/.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 drivers/iommu/mtk_iommu.c    | 2 +-
 drivers/iommu/mtk_iommu_v1.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index d837adfd1da5..d5848f78a677 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -844,7 +844,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
 			id = i;
 
 		plarbdev = of_find_device_by_node(larbnode);
-		if (!plarbdev) {
+		if (!plarbdev || !plarbdev->dev.driver) {
 			of_node_put(larbnode);
 			return -EPROBE_DEFER;
 		}
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index 1467ba1e4417..4d7809432239 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -602,7 +602,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
 		}
 
 		plarbdev = of_find_device_by_node(larbnode);
-		if (!plarbdev) {
+		if (!plarbdev || !plarbdev->dev.driver) {
 			of_node_put(larbnode);
 			return -EPROBE_DEFER;
 		}
-- 
2.18.0


^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 03/12] iommu/mediatek: Add probe_defer for smi-larb
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Dafna Hirschfeld, Chun-Kuang Hu, Will Deacon, dri-devel,
	anthony.huang, youlin.pei, Evan Green, Eizan Miyamoto,
	Matthias Kaehlcke, linux-arm-kernel, linux-media, devicetree,
	Philipp Zabel, Frank Wunderlich, yi.kuo, linux-mediatek,
	Hsin-Yi Wang, Tiffany Lin, anan.sun, srv_heupstream, acourbot,
	linux-kernel, iommu, Daniel Vetter, Robin Murphy

Prepare for adding device_link.

The iommu consumer should use device_link to connect with the
smi-larb(supplier). then the smi-larb should run before the iommu
consumer. Here we delay the iommu driver until the smi driver is ready,
then all the iommu consumers always are after the smi driver.

When there is no this patch, if some consumer drivers run before
smi-larb, the supplier link_status is DL_DEV_NO_DRIVER(0) in the
device_link_add, then device_links_driver_bound will use WARN_ON
to complain that the link_status of supplier is not right.

device_is_bound may be more elegant here. but it is not allowed to
EXPORT from https://lore.kernel.org/patchwork/patch/1334670/.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 drivers/iommu/mtk_iommu.c    | 2 +-
 drivers/iommu/mtk_iommu_v1.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index d837adfd1da5..d5848f78a677 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -844,7 +844,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
 			id = i;
 
 		plarbdev = of_find_device_by_node(larbnode);
-		if (!plarbdev) {
+		if (!plarbdev || !plarbdev->dev.driver) {
 			of_node_put(larbnode);
 			return -EPROBE_DEFER;
 		}
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index 1467ba1e4417..4d7809432239 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -602,7 +602,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
 		}
 
 		plarbdev = of_find_device_by_node(larbnode);
-		if (!plarbdev) {
+		if (!plarbdev || !plarbdev->dev.driver) {
 			of_node_put(larbnode);
 			return -EPROBE_DEFER;
 		}
-- 
2.18.0

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 03/12] iommu/mediatek: Add probe_defer for smi-larb
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich

Prepare for adding device_link.

The iommu consumer should use device_link to connect with the
smi-larb(supplier). then the smi-larb should run before the iommu
consumer. Here we delay the iommu driver until the smi driver is ready,
then all the iommu consumers always are after the smi driver.

When there is no this patch, if some consumer drivers run before
smi-larb, the supplier link_status is DL_DEV_NO_DRIVER(0) in the
device_link_add, then device_links_driver_bound will use WARN_ON
to complain that the link_status of supplier is not right.

device_is_bound may be more elegant here. but it is not allowed to
EXPORT from https://lore.kernel.org/patchwork/patch/1334670/.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 drivers/iommu/mtk_iommu.c    | 2 +-
 drivers/iommu/mtk_iommu_v1.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index d837adfd1da5..d5848f78a677 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -844,7 +844,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
 			id = i;
 
 		plarbdev = of_find_device_by_node(larbnode);
-		if (!plarbdev) {
+		if (!plarbdev || !plarbdev->dev.driver) {
 			of_node_put(larbnode);
 			return -EPROBE_DEFER;
 		}
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index 1467ba1e4417..4d7809432239 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -602,7 +602,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
 		}
 
 		plarbdev = of_find_device_by_node(larbnode);
-		if (!plarbdev) {
+		if (!plarbdev || !plarbdev->dev.driver) {
 			of_node_put(larbnode);
 			return -EPROBE_DEFER;
 		}
-- 
2.18.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 03/12] iommu/mediatek: Add probe_defer for smi-larb
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich

Prepare for adding device_link.

The iommu consumer should use device_link to connect with the
smi-larb(supplier). then the smi-larb should run before the iommu
consumer. Here we delay the iommu driver until the smi driver is ready,
then all the iommu consumers always are after the smi driver.

When there is no this patch, if some consumer drivers run before
smi-larb, the supplier link_status is DL_DEV_NO_DRIVER(0) in the
device_link_add, then device_links_driver_bound will use WARN_ON
to complain that the link_status of supplier is not right.

device_is_bound may be more elegant here. but it is not allowed to
EXPORT from https://lore.kernel.org/patchwork/patch/1334670/.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 drivers/iommu/mtk_iommu.c    | 2 +-
 drivers/iommu/mtk_iommu_v1.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index d837adfd1da5..d5848f78a677 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -844,7 +844,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
 			id = i;
 
 		plarbdev = of_find_device_by_node(larbnode);
-		if (!plarbdev) {
+		if (!plarbdev || !plarbdev->dev.driver) {
 			of_node_put(larbnode);
 			return -EPROBE_DEFER;
 		}
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index 1467ba1e4417..4d7809432239 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -602,7 +602,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
 		}
 
 		plarbdev = of_find_device_by_node(larbnode);
-		if (!plarbdev) {
+		if (!plarbdev || !plarbdev->dev.driver) {
 			of_node_put(larbnode);
 			return -EPROBE_DEFER;
 		}
-- 
2.18.0


^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 03/12] iommu/mediatek: Add probe_defer for smi-larb
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich

Prepare for adding device_link.

The iommu consumer should use device_link to connect with the
smi-larb(supplier). then the smi-larb should run before the iommu
consumer. Here we delay the iommu driver until the smi driver is ready,
then all the iommu consumers always are after the smi driver.

When there is no this patch, if some consumer drivers run before
smi-larb, the supplier link_status is DL_DEV_NO_DRIVER(0) in the
device_link_add, then device_links_driver_bound will use WARN_ON
to complain that the link_status of supplier is not right.

device_is_bound may be more elegant here. but it is not allowed to
EXPORT from https://lore.kernel.org/patchwork/patch/1334670/.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 drivers/iommu/mtk_iommu.c    | 2 +-
 drivers/iommu/mtk_iommu_v1.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index d837adfd1da5..d5848f78a677 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -844,7 +844,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
 			id = i;
 
 		plarbdev = of_find_device_by_node(larbnode);
-		if (!plarbdev) {
+		if (!plarbdev || !plarbdev->dev.driver) {
 			of_node_put(larbnode);
 			return -EPROBE_DEFER;
 		}
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index 1467ba1e4417..4d7809432239 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -602,7 +602,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
 		}
 
 		plarbdev = of_find_device_by_node(larbnode);
-		if (!plarbdev) {
+		if (!plarbdev || !plarbdev->dev.driver) {
 			of_node_put(larbnode);
 			return -EPROBE_DEFER;
 		}
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 04/12] iommu/mediatek: Add device_link between the consumer and the larb devices
  2021-09-29  1:37 ` Yong Wu
                     ` (2 preceding siblings ...)
  (?)
@ 2021-09-29  1:37   ` Yong Wu
  -1 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich

MediaTek IOMMU-SMI diagram is like below. all the consumer connect with
smi-larb, then connect with smi-common.

        M4U
         |
    smi-common
         |
  -------------
  |         |    ...
  |         |
larb1     larb2
  |         |
vdec       venc

When the consumer works, it should enable the smi-larb's power which
also need enable the smi-common's power firstly.

Thus, First of all, use the device link connect the consumer and the
smi-larbs. then add device link between the smi-larb and smi-common.

This patch adds device_link between the consumer and the larbs.

When device_link_add, I add the flag DL_FLAG_STATELESS to avoid calling
pm_runtime_xx to keep the original status of clocks. It can avoid two
issues:
1) Display HW show fastlogo abnormally reported in [1]. At the beggining,
all the clocks are enabled before entering kernel, but the clocks for
display HW(always in larb0) will be gated after clk_enable and clk_disable
called from device_link_add(->pm_runtime_resume) and rpm_idle. The clock
operation happened before display driver probe. At that time, the display
HW will be abnormal.

2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip
pm_runtime_xx to avoid the deadlock.

Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
device_link_removed should be added explicitly.

[1] https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/
[2] https://lore.kernel.org/patchwork/patch/1086569/

Suggested-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 drivers/iommu/mtk_iommu.c    | 22 ++++++++++++++++++++++
 drivers/iommu/mtk_iommu_v1.c | 20 +++++++++++++++++++-
 2 files changed, 41 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index d5848f78a677..a2fa55899434 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -560,22 +560,44 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
 {
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
 	struct mtk_iommu_data *data;
+	struct device_link *link;
+	struct device *larbdev;
+	unsigned int larbid;
 
 	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
 		return ERR_PTR(-ENODEV); /* Not a iommu client device */
 
 	data = dev_iommu_priv_get(dev);
 
+	/*
+	 * Link the consumer device with the smi-larb device(supplier)
+	 * The device in each a larb is a independent HW. thus only link
+	 * one larb here.
+	 */
+	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
+	larbdev = data->larb_imu[larbid].dev;
+	link = device_link_add(dev, larbdev,
+			       DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
+	if (!link)
+		dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
 	return &data->iommu;
 }
 
 static void mtk_iommu_release_device(struct device *dev)
 {
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+	struct mtk_iommu_data *data;
+	struct device *larbdev;
+	unsigned int larbid;
 
 	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
 		return;
 
+	data = dev_iommu_priv_get(dev);
+	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
+	larbdev = data->larb_imu[larbid].dev;
+	device_link_remove(dev, larbdev);
+
 	iommu_fwspec_free(dev);
 }
 
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index 4d7809432239..e6f13459470e 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -423,7 +423,9 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
 	struct of_phandle_args iommu_spec;
 	struct mtk_iommu_data *data;
-	int err, idx = 0;
+	int err, idx = 0, larbid;
+	struct device_link *link;
+	struct device *larbdev;
 
 	/*
 	 * In the deferred case, free the existed fwspec.
@@ -453,6 +455,14 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
 
 	data = dev_iommu_priv_get(dev);
 
+	/* Link the consumer device with the smi-larb device(supplier) */
+	larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
+	larbdev = data->larb_imu[larbid].dev;
+	link = device_link_add(dev, larbdev,
+			       DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
+	if (!link)
+		dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
+
 	return &data->iommu;
 }
 
@@ -473,10 +483,18 @@ static void mtk_iommu_probe_finalize(struct device *dev)
 static void mtk_iommu_release_device(struct device *dev)
 {
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+	struct mtk_iommu_data *data;
+	struct device *larbdev;
+	unsigned int larbid;
 
 	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
 		return;
 
+	data = dev_iommu_priv_get(dev);
+	larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
+	larbdev = data->larb_imu[larbid].dev;
+	device_link_remove(dev, larbdev);
+
 	iommu_fwspec_free(dev);
 }
 
-- 
2.18.0


^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 04/12] iommu/mediatek: Add device_link between the consumer and the larb devices
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Dafna Hirschfeld, Chun-Kuang Hu, Will Deacon, dri-devel,
	anthony.huang, youlin.pei, Evan Green, Eizan Miyamoto,
	Matthias Kaehlcke, linux-arm-kernel, linux-media, devicetree,
	Philipp Zabel, Frank Wunderlich, yi.kuo, linux-mediatek,
	Hsin-Yi Wang, Tiffany Lin, anan.sun, srv_heupstream, acourbot,
	linux-kernel, iommu, Daniel Vetter, Robin Murphy

MediaTek IOMMU-SMI diagram is like below. all the consumer connect with
smi-larb, then connect with smi-common.

        M4U
         |
    smi-common
         |
  -------------
  |         |    ...
  |         |
larb1     larb2
  |         |
vdec       venc

When the consumer works, it should enable the smi-larb's power which
also need enable the smi-common's power firstly.

Thus, First of all, use the device link connect the consumer and the
smi-larbs. then add device link between the smi-larb and smi-common.

This patch adds device_link between the consumer and the larbs.

When device_link_add, I add the flag DL_FLAG_STATELESS to avoid calling
pm_runtime_xx to keep the original status of clocks. It can avoid two
issues:
1) Display HW show fastlogo abnormally reported in [1]. At the beggining,
all the clocks are enabled before entering kernel, but the clocks for
display HW(always in larb0) will be gated after clk_enable and clk_disable
called from device_link_add(->pm_runtime_resume) and rpm_idle. The clock
operation happened before display driver probe. At that time, the display
HW will be abnormal.

2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip
pm_runtime_xx to avoid the deadlock.

Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
device_link_removed should be added explicitly.

[1] https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/
[2] https://lore.kernel.org/patchwork/patch/1086569/

Suggested-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 drivers/iommu/mtk_iommu.c    | 22 ++++++++++++++++++++++
 drivers/iommu/mtk_iommu_v1.c | 20 +++++++++++++++++++-
 2 files changed, 41 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index d5848f78a677..a2fa55899434 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -560,22 +560,44 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
 {
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
 	struct mtk_iommu_data *data;
+	struct device_link *link;
+	struct device *larbdev;
+	unsigned int larbid;
 
 	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
 		return ERR_PTR(-ENODEV); /* Not a iommu client device */
 
 	data = dev_iommu_priv_get(dev);
 
+	/*
+	 * Link the consumer device with the smi-larb device(supplier)
+	 * The device in each a larb is a independent HW. thus only link
+	 * one larb here.
+	 */
+	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
+	larbdev = data->larb_imu[larbid].dev;
+	link = device_link_add(dev, larbdev,
+			       DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
+	if (!link)
+		dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
 	return &data->iommu;
 }
 
 static void mtk_iommu_release_device(struct device *dev)
 {
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+	struct mtk_iommu_data *data;
+	struct device *larbdev;
+	unsigned int larbid;
 
 	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
 		return;
 
+	data = dev_iommu_priv_get(dev);
+	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
+	larbdev = data->larb_imu[larbid].dev;
+	device_link_remove(dev, larbdev);
+
 	iommu_fwspec_free(dev);
 }
 
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index 4d7809432239..e6f13459470e 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -423,7 +423,9 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
 	struct of_phandle_args iommu_spec;
 	struct mtk_iommu_data *data;
-	int err, idx = 0;
+	int err, idx = 0, larbid;
+	struct device_link *link;
+	struct device *larbdev;
 
 	/*
 	 * In the deferred case, free the existed fwspec.
@@ -453,6 +455,14 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
 
 	data = dev_iommu_priv_get(dev);
 
+	/* Link the consumer device with the smi-larb device(supplier) */
+	larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
+	larbdev = data->larb_imu[larbid].dev;
+	link = device_link_add(dev, larbdev,
+			       DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
+	if (!link)
+		dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
+
 	return &data->iommu;
 }
 
@@ -473,10 +483,18 @@ static void mtk_iommu_probe_finalize(struct device *dev)
 static void mtk_iommu_release_device(struct device *dev)
 {
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+	struct mtk_iommu_data *data;
+	struct device *larbdev;
+	unsigned int larbid;
 
 	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
 		return;
 
+	data = dev_iommu_priv_get(dev);
+	larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
+	larbdev = data->larb_imu[larbid].dev;
+	device_link_remove(dev, larbdev);
+
 	iommu_fwspec_free(dev);
 }
 
-- 
2.18.0

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 04/12] iommu/mediatek: Add device_link between the consumer and the larb devices
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich

MediaTek IOMMU-SMI diagram is like below. all the consumer connect with
smi-larb, then connect with smi-common.

        M4U
         |
    smi-common
         |
  -------------
  |         |    ...
  |         |
larb1     larb2
  |         |
vdec       venc

When the consumer works, it should enable the smi-larb's power which
also need enable the smi-common's power firstly.

Thus, First of all, use the device link connect the consumer and the
smi-larbs. then add device link between the smi-larb and smi-common.

This patch adds device_link between the consumer and the larbs.

When device_link_add, I add the flag DL_FLAG_STATELESS to avoid calling
pm_runtime_xx to keep the original status of clocks. It can avoid two
issues:
1) Display HW show fastlogo abnormally reported in [1]. At the beggining,
all the clocks are enabled before entering kernel, but the clocks for
display HW(always in larb0) will be gated after clk_enable and clk_disable
called from device_link_add(->pm_runtime_resume) and rpm_idle. The clock
operation happened before display driver probe. At that time, the display
HW will be abnormal.

2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip
pm_runtime_xx to avoid the deadlock.

Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
device_link_removed should be added explicitly.

[1] https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/
[2] https://lore.kernel.org/patchwork/patch/1086569/

Suggested-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 drivers/iommu/mtk_iommu.c    | 22 ++++++++++++++++++++++
 drivers/iommu/mtk_iommu_v1.c | 20 +++++++++++++++++++-
 2 files changed, 41 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index d5848f78a677..a2fa55899434 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -560,22 +560,44 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
 {
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
 	struct mtk_iommu_data *data;
+	struct device_link *link;
+	struct device *larbdev;
+	unsigned int larbid;
 
 	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
 		return ERR_PTR(-ENODEV); /* Not a iommu client device */
 
 	data = dev_iommu_priv_get(dev);
 
+	/*
+	 * Link the consumer device with the smi-larb device(supplier)
+	 * The device in each a larb is a independent HW. thus only link
+	 * one larb here.
+	 */
+	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
+	larbdev = data->larb_imu[larbid].dev;
+	link = device_link_add(dev, larbdev,
+			       DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
+	if (!link)
+		dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
 	return &data->iommu;
 }
 
 static void mtk_iommu_release_device(struct device *dev)
 {
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+	struct mtk_iommu_data *data;
+	struct device *larbdev;
+	unsigned int larbid;
 
 	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
 		return;
 
+	data = dev_iommu_priv_get(dev);
+	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
+	larbdev = data->larb_imu[larbid].dev;
+	device_link_remove(dev, larbdev);
+
 	iommu_fwspec_free(dev);
 }
 
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index 4d7809432239..e6f13459470e 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -423,7 +423,9 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
 	struct of_phandle_args iommu_spec;
 	struct mtk_iommu_data *data;
-	int err, idx = 0;
+	int err, idx = 0, larbid;
+	struct device_link *link;
+	struct device *larbdev;
 
 	/*
 	 * In the deferred case, free the existed fwspec.
@@ -453,6 +455,14 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
 
 	data = dev_iommu_priv_get(dev);
 
+	/* Link the consumer device with the smi-larb device(supplier) */
+	larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
+	larbdev = data->larb_imu[larbid].dev;
+	link = device_link_add(dev, larbdev,
+			       DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
+	if (!link)
+		dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
+
 	return &data->iommu;
 }
 
@@ -473,10 +483,18 @@ static void mtk_iommu_probe_finalize(struct device *dev)
 static void mtk_iommu_release_device(struct device *dev)
 {
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+	struct mtk_iommu_data *data;
+	struct device *larbdev;
+	unsigned int larbid;
 
 	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
 		return;
 
+	data = dev_iommu_priv_get(dev);
+	larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
+	larbdev = data->larb_imu[larbid].dev;
+	device_link_remove(dev, larbdev);
+
 	iommu_fwspec_free(dev);
 }
 
-- 
2.18.0


^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 04/12] iommu/mediatek: Add device_link between the consumer and the larb devices
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich

MediaTek IOMMU-SMI diagram is like below. all the consumer connect with
smi-larb, then connect with smi-common.

        M4U
         |
    smi-common
         |
  -------------
  |         |    ...
  |         |
larb1     larb2
  |         |
vdec       venc

When the consumer works, it should enable the smi-larb's power which
also need enable the smi-common's power firstly.

Thus, First of all, use the device link connect the consumer and the
smi-larbs. then add device link between the smi-larb and smi-common.

This patch adds device_link between the consumer and the larbs.

When device_link_add, I add the flag DL_FLAG_STATELESS to avoid calling
pm_runtime_xx to keep the original status of clocks. It can avoid two
issues:
1) Display HW show fastlogo abnormally reported in [1]. At the beggining,
all the clocks are enabled before entering kernel, but the clocks for
display HW(always in larb0) will be gated after clk_enable and clk_disable
called from device_link_add(->pm_runtime_resume) and rpm_idle. The clock
operation happened before display driver probe. At that time, the display
HW will be abnormal.

2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip
pm_runtime_xx to avoid the deadlock.

Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
device_link_removed should be added explicitly.

[1] https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/
[2] https://lore.kernel.org/patchwork/patch/1086569/

Suggested-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 drivers/iommu/mtk_iommu.c    | 22 ++++++++++++++++++++++
 drivers/iommu/mtk_iommu_v1.c | 20 +++++++++++++++++++-
 2 files changed, 41 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index d5848f78a677..a2fa55899434 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -560,22 +560,44 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
 {
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
 	struct mtk_iommu_data *data;
+	struct device_link *link;
+	struct device *larbdev;
+	unsigned int larbid;
 
 	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
 		return ERR_PTR(-ENODEV); /* Not a iommu client device */
 
 	data = dev_iommu_priv_get(dev);
 
+	/*
+	 * Link the consumer device with the smi-larb device(supplier)
+	 * The device in each a larb is a independent HW. thus only link
+	 * one larb here.
+	 */
+	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
+	larbdev = data->larb_imu[larbid].dev;
+	link = device_link_add(dev, larbdev,
+			       DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
+	if (!link)
+		dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
 	return &data->iommu;
 }
 
 static void mtk_iommu_release_device(struct device *dev)
 {
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+	struct mtk_iommu_data *data;
+	struct device *larbdev;
+	unsigned int larbid;
 
 	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
 		return;
 
+	data = dev_iommu_priv_get(dev);
+	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
+	larbdev = data->larb_imu[larbid].dev;
+	device_link_remove(dev, larbdev);
+
 	iommu_fwspec_free(dev);
 }
 
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index 4d7809432239..e6f13459470e 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -423,7 +423,9 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
 	struct of_phandle_args iommu_spec;
 	struct mtk_iommu_data *data;
-	int err, idx = 0;
+	int err, idx = 0, larbid;
+	struct device_link *link;
+	struct device *larbdev;
 
 	/*
 	 * In the deferred case, free the existed fwspec.
@@ -453,6 +455,14 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
 
 	data = dev_iommu_priv_get(dev);
 
+	/* Link the consumer device with the smi-larb device(supplier) */
+	larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
+	larbdev = data->larb_imu[larbid].dev;
+	link = device_link_add(dev, larbdev,
+			       DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
+	if (!link)
+		dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
+
 	return &data->iommu;
 }
 
@@ -473,10 +483,18 @@ static void mtk_iommu_probe_finalize(struct device *dev)
 static void mtk_iommu_release_device(struct device *dev)
 {
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+	struct mtk_iommu_data *data;
+	struct device *larbdev;
+	unsigned int larbid;
 
 	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
 		return;
 
+	data = dev_iommu_priv_get(dev);
+	larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
+	larbdev = data->larb_imu[larbid].dev;
+	device_link_remove(dev, larbdev);
+
 	iommu_fwspec_free(dev);
 }
 
-- 
2.18.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 04/12] iommu/mediatek: Add device_link between the consumer and the larb devices
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich

MediaTek IOMMU-SMI diagram is like below. all the consumer connect with
smi-larb, then connect with smi-common.

        M4U
         |
    smi-common
         |
  -------------
  |         |    ...
  |         |
larb1     larb2
  |         |
vdec       venc

When the consumer works, it should enable the smi-larb's power which
also need enable the smi-common's power firstly.

Thus, First of all, use the device link connect the consumer and the
smi-larbs. then add device link between the smi-larb and smi-common.

This patch adds device_link between the consumer and the larbs.

When device_link_add, I add the flag DL_FLAG_STATELESS to avoid calling
pm_runtime_xx to keep the original status of clocks. It can avoid two
issues:
1) Display HW show fastlogo abnormally reported in [1]. At the beggining,
all the clocks are enabled before entering kernel, but the clocks for
display HW(always in larb0) will be gated after clk_enable and clk_disable
called from device_link_add(->pm_runtime_resume) and rpm_idle. The clock
operation happened before display driver probe. At that time, the display
HW will be abnormal.

2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip
pm_runtime_xx to avoid the deadlock.

Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
device_link_removed should be added explicitly.

[1] https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/
[2] https://lore.kernel.org/patchwork/patch/1086569/

Suggested-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 drivers/iommu/mtk_iommu.c    | 22 ++++++++++++++++++++++
 drivers/iommu/mtk_iommu_v1.c | 20 +++++++++++++++++++-
 2 files changed, 41 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index d5848f78a677..a2fa55899434 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -560,22 +560,44 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
 {
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
 	struct mtk_iommu_data *data;
+	struct device_link *link;
+	struct device *larbdev;
+	unsigned int larbid;
 
 	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
 		return ERR_PTR(-ENODEV); /* Not a iommu client device */
 
 	data = dev_iommu_priv_get(dev);
 
+	/*
+	 * Link the consumer device with the smi-larb device(supplier)
+	 * The device in each a larb is a independent HW. thus only link
+	 * one larb here.
+	 */
+	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
+	larbdev = data->larb_imu[larbid].dev;
+	link = device_link_add(dev, larbdev,
+			       DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
+	if (!link)
+		dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
 	return &data->iommu;
 }
 
 static void mtk_iommu_release_device(struct device *dev)
 {
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+	struct mtk_iommu_data *data;
+	struct device *larbdev;
+	unsigned int larbid;
 
 	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
 		return;
 
+	data = dev_iommu_priv_get(dev);
+	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
+	larbdev = data->larb_imu[larbid].dev;
+	device_link_remove(dev, larbdev);
+
 	iommu_fwspec_free(dev);
 }
 
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index 4d7809432239..e6f13459470e 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -423,7 +423,9 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
 	struct of_phandle_args iommu_spec;
 	struct mtk_iommu_data *data;
-	int err, idx = 0;
+	int err, idx = 0, larbid;
+	struct device_link *link;
+	struct device *larbdev;
 
 	/*
 	 * In the deferred case, free the existed fwspec.
@@ -453,6 +455,14 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
 
 	data = dev_iommu_priv_get(dev);
 
+	/* Link the consumer device with the smi-larb device(supplier) */
+	larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
+	larbdev = data->larb_imu[larbid].dev;
+	link = device_link_add(dev, larbdev,
+			       DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
+	if (!link)
+		dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
+
 	return &data->iommu;
 }
 
@@ -473,10 +483,18 @@ static void mtk_iommu_probe_finalize(struct device *dev)
 static void mtk_iommu_release_device(struct device *dev)
 {
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+	struct mtk_iommu_data *data;
+	struct device *larbdev;
+	unsigned int larbid;
 
 	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
 		return;
 
+	data = dev_iommu_priv_get(dev);
+	larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
+	larbdev = data->larb_imu[larbid].dev;
+	device_link_remove(dev, larbdev);
+
 	iommu_fwspec_free(dev);
 }
 
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 05/12] media: mtk-jpeg: Get rid of mtk_smi_larb_get/put
  2021-09-29  1:37 ` Yong Wu
                     ` (2 preceding siblings ...)
  (?)
@ 2021-09-29  1:37   ` Yong Wu
  -1 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich, Rick Chang, Xia Jiang

MediaTek IOMMU has already added device_link between the consumer
and smi-larb device. If the jpg device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.

After removing the larb_get operations, then mtk_jpeg_clk_init is
also unnecessary. Remove it too.

CC: Rick Chang <rick.chang@mediatek.com>
CC: Xia Jiang <xia.jiang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: Rick Chang <rick.chang@mediatek.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 .../media/platform/mtk-jpeg/mtk_jpeg_core.c   | 45 +------------------
 .../media/platform/mtk-jpeg/mtk_jpeg_core.h   |  2 -
 2 files changed, 2 insertions(+), 45 deletions(-)

diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
index a89c7b206eef..4fea2c512434 100644
--- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
@@ -22,7 +22,6 @@
 #include <media/v4l2-ioctl.h>
 #include <media/videobuf2-core.h>
 #include <media/videobuf2-dma-contig.h>
-#include <soc/mediatek/smi.h>
 
 #include "mtk_jpeg_enc_hw.h"
 #include "mtk_jpeg_dec_hw.h"
@@ -1055,10 +1054,6 @@ static void mtk_jpeg_clk_on(struct mtk_jpeg_dev *jpeg)
 {
 	int ret;
 
-	ret = mtk_smi_larb_get(jpeg->larb);
-	if (ret)
-		dev_err(jpeg->dev, "mtk_smi_larb_get larbvdec fail %d\n", ret);
-
 	ret = clk_bulk_prepare_enable(jpeg->variant->num_clks,
 				      jpeg->variant->clks);
 	if (ret)
@@ -1069,7 +1064,6 @@ static void mtk_jpeg_clk_off(struct mtk_jpeg_dev *jpeg)
 {
 	clk_bulk_disable_unprepare(jpeg->variant->num_clks,
 				   jpeg->variant->clks);
-	mtk_smi_larb_put(jpeg->larb);
 }
 
 static irqreturn_t mtk_jpeg_enc_done(struct mtk_jpeg_dev *jpeg)
@@ -1284,35 +1278,6 @@ static struct clk_bulk_data mtk_jpeg_clocks[] = {
 	{ .id = "jpgenc" },
 };
 
-static int mtk_jpeg_clk_init(struct mtk_jpeg_dev *jpeg)
-{
-	struct device_node *node;
-	struct platform_device *pdev;
-	int ret;
-
-	node = of_parse_phandle(jpeg->dev->of_node, "mediatek,larb", 0);
-	if (!node)
-		return -EINVAL;
-	pdev = of_find_device_by_node(node);
-	if (WARN_ON(!pdev)) {
-		of_node_put(node);
-		return -EINVAL;
-	}
-	of_node_put(node);
-
-	jpeg->larb = &pdev->dev;
-
-	ret = devm_clk_bulk_get(jpeg->dev, jpeg->variant->num_clks,
-				jpeg->variant->clks);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to get jpeg clock:%d\n", ret);
-		put_device(&pdev->dev);
-		return ret;
-	}
-
-	return 0;
-}
-
 static void mtk_jpeg_job_timeout_work(struct work_struct *work)
 {
 	struct mtk_jpeg_dev *jpeg = container_of(work, struct mtk_jpeg_dev,
@@ -1333,11 +1298,6 @@ static void mtk_jpeg_job_timeout_work(struct work_struct *work)
 	v4l2_m2m_job_finish(jpeg->m2m_dev, ctx->fh.m2m_ctx);
 }
 
-static inline void mtk_jpeg_clk_release(struct mtk_jpeg_dev *jpeg)
-{
-	put_device(jpeg->larb);
-}
-
 static int mtk_jpeg_probe(struct platform_device *pdev)
 {
 	struct mtk_jpeg_dev *jpeg;
@@ -1376,7 +1336,8 @@ static int mtk_jpeg_probe(struct platform_device *pdev)
 		goto err_req_irq;
 	}
 
-	ret = mtk_jpeg_clk_init(jpeg);
+	ret = devm_clk_bulk_get(jpeg->dev, jpeg->variant->num_clks,
+				jpeg->variant->clks);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to init clk, err %d\n", ret);
 		goto err_clk_init;
@@ -1442,7 +1403,6 @@ static int mtk_jpeg_probe(struct platform_device *pdev)
 	v4l2_device_unregister(&jpeg->v4l2_dev);
 
 err_dev_register:
-	mtk_jpeg_clk_release(jpeg);
 
 err_clk_init:
 
@@ -1460,7 +1420,6 @@ static int mtk_jpeg_remove(struct platform_device *pdev)
 	video_device_release(jpeg->vdev);
 	v4l2_m2m_release(jpeg->m2m_dev);
 	v4l2_device_unregister(&jpeg->v4l2_dev);
-	mtk_jpeg_clk_release(jpeg);
 
 	return 0;
 }
diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
index 595f7f10c9fd..3e4811a41ba2 100644
--- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
@@ -85,7 +85,6 @@ struct mtk_jpeg_variant {
  * @alloc_ctx:		videobuf2 memory allocator's context
  * @vdev:		video device node for jpeg mem2mem mode
  * @reg_base:		JPEG registers mapping
- * @larb:		SMI device
  * @job_timeout_work:	IRQ timeout structure
  * @variant:		driver variant to be used
  */
@@ -99,7 +98,6 @@ struct mtk_jpeg_dev {
 	void			*alloc_ctx;
 	struct video_device	*vdev;
 	void __iomem		*reg_base;
-	struct device		*larb;
 	struct delayed_work job_timeout_work;
 	const struct mtk_jpeg_variant *variant;
 };
-- 
2.18.0


^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 05/12] media: mtk-jpeg: Get rid of mtk_smi_larb_get/put
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Xia Jiang, Dafna Hirschfeld, Chun-Kuang Hu, Will Deacon,
	dri-devel, anthony.huang, youlin.pei, Rick Chang, Evan Green,
	Eizan Miyamoto, Matthias Kaehlcke, linux-arm-kernel, linux-media,
	devicetree, Philipp Zabel, Frank Wunderlich, yi.kuo,
	linux-mediatek, Hsin-Yi Wang, Tiffany Lin, anan.sun,
	srv_heupstream, acourbot, linux-kernel, iommu, Daniel Vetter,
	Robin Murphy

MediaTek IOMMU has already added device_link between the consumer
and smi-larb device. If the jpg device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.

After removing the larb_get operations, then mtk_jpeg_clk_init is
also unnecessary. Remove it too.

CC: Rick Chang <rick.chang@mediatek.com>
CC: Xia Jiang <xia.jiang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: Rick Chang <rick.chang@mediatek.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 .../media/platform/mtk-jpeg/mtk_jpeg_core.c   | 45 +------------------
 .../media/platform/mtk-jpeg/mtk_jpeg_core.h   |  2 -
 2 files changed, 2 insertions(+), 45 deletions(-)

diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
index a89c7b206eef..4fea2c512434 100644
--- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
@@ -22,7 +22,6 @@
 #include <media/v4l2-ioctl.h>
 #include <media/videobuf2-core.h>
 #include <media/videobuf2-dma-contig.h>
-#include <soc/mediatek/smi.h>
 
 #include "mtk_jpeg_enc_hw.h"
 #include "mtk_jpeg_dec_hw.h"
@@ -1055,10 +1054,6 @@ static void mtk_jpeg_clk_on(struct mtk_jpeg_dev *jpeg)
 {
 	int ret;
 
-	ret = mtk_smi_larb_get(jpeg->larb);
-	if (ret)
-		dev_err(jpeg->dev, "mtk_smi_larb_get larbvdec fail %d\n", ret);
-
 	ret = clk_bulk_prepare_enable(jpeg->variant->num_clks,
 				      jpeg->variant->clks);
 	if (ret)
@@ -1069,7 +1064,6 @@ static void mtk_jpeg_clk_off(struct mtk_jpeg_dev *jpeg)
 {
 	clk_bulk_disable_unprepare(jpeg->variant->num_clks,
 				   jpeg->variant->clks);
-	mtk_smi_larb_put(jpeg->larb);
 }
 
 static irqreturn_t mtk_jpeg_enc_done(struct mtk_jpeg_dev *jpeg)
@@ -1284,35 +1278,6 @@ static struct clk_bulk_data mtk_jpeg_clocks[] = {
 	{ .id = "jpgenc" },
 };
 
-static int mtk_jpeg_clk_init(struct mtk_jpeg_dev *jpeg)
-{
-	struct device_node *node;
-	struct platform_device *pdev;
-	int ret;
-
-	node = of_parse_phandle(jpeg->dev->of_node, "mediatek,larb", 0);
-	if (!node)
-		return -EINVAL;
-	pdev = of_find_device_by_node(node);
-	if (WARN_ON(!pdev)) {
-		of_node_put(node);
-		return -EINVAL;
-	}
-	of_node_put(node);
-
-	jpeg->larb = &pdev->dev;
-
-	ret = devm_clk_bulk_get(jpeg->dev, jpeg->variant->num_clks,
-				jpeg->variant->clks);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to get jpeg clock:%d\n", ret);
-		put_device(&pdev->dev);
-		return ret;
-	}
-
-	return 0;
-}
-
 static void mtk_jpeg_job_timeout_work(struct work_struct *work)
 {
 	struct mtk_jpeg_dev *jpeg = container_of(work, struct mtk_jpeg_dev,
@@ -1333,11 +1298,6 @@ static void mtk_jpeg_job_timeout_work(struct work_struct *work)
 	v4l2_m2m_job_finish(jpeg->m2m_dev, ctx->fh.m2m_ctx);
 }
 
-static inline void mtk_jpeg_clk_release(struct mtk_jpeg_dev *jpeg)
-{
-	put_device(jpeg->larb);
-}
-
 static int mtk_jpeg_probe(struct platform_device *pdev)
 {
 	struct mtk_jpeg_dev *jpeg;
@@ -1376,7 +1336,8 @@ static int mtk_jpeg_probe(struct platform_device *pdev)
 		goto err_req_irq;
 	}
 
-	ret = mtk_jpeg_clk_init(jpeg);
+	ret = devm_clk_bulk_get(jpeg->dev, jpeg->variant->num_clks,
+				jpeg->variant->clks);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to init clk, err %d\n", ret);
 		goto err_clk_init;
@@ -1442,7 +1403,6 @@ static int mtk_jpeg_probe(struct platform_device *pdev)
 	v4l2_device_unregister(&jpeg->v4l2_dev);
 
 err_dev_register:
-	mtk_jpeg_clk_release(jpeg);
 
 err_clk_init:
 
@@ -1460,7 +1420,6 @@ static int mtk_jpeg_remove(struct platform_device *pdev)
 	video_device_release(jpeg->vdev);
 	v4l2_m2m_release(jpeg->m2m_dev);
 	v4l2_device_unregister(&jpeg->v4l2_dev);
-	mtk_jpeg_clk_release(jpeg);
 
 	return 0;
 }
diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
index 595f7f10c9fd..3e4811a41ba2 100644
--- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
@@ -85,7 +85,6 @@ struct mtk_jpeg_variant {
  * @alloc_ctx:		videobuf2 memory allocator's context
  * @vdev:		video device node for jpeg mem2mem mode
  * @reg_base:		JPEG registers mapping
- * @larb:		SMI device
  * @job_timeout_work:	IRQ timeout structure
  * @variant:		driver variant to be used
  */
@@ -99,7 +98,6 @@ struct mtk_jpeg_dev {
 	void			*alloc_ctx;
 	struct video_device	*vdev;
 	void __iomem		*reg_base;
-	struct device		*larb;
 	struct delayed_work job_timeout_work;
 	const struct mtk_jpeg_variant *variant;
 };
-- 
2.18.0

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 05/12] media: mtk-jpeg: Get rid of mtk_smi_larb_get/put
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich, Rick Chang, Xia Jiang

MediaTek IOMMU has already added device_link between the consumer
and smi-larb device. If the jpg device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.

After removing the larb_get operations, then mtk_jpeg_clk_init is
also unnecessary. Remove it too.

CC: Rick Chang <rick.chang@mediatek.com>
CC: Xia Jiang <xia.jiang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: Rick Chang <rick.chang@mediatek.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 .../media/platform/mtk-jpeg/mtk_jpeg_core.c   | 45 +------------------
 .../media/platform/mtk-jpeg/mtk_jpeg_core.h   |  2 -
 2 files changed, 2 insertions(+), 45 deletions(-)

diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
index a89c7b206eef..4fea2c512434 100644
--- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
@@ -22,7 +22,6 @@
 #include <media/v4l2-ioctl.h>
 #include <media/videobuf2-core.h>
 #include <media/videobuf2-dma-contig.h>
-#include <soc/mediatek/smi.h>
 
 #include "mtk_jpeg_enc_hw.h"
 #include "mtk_jpeg_dec_hw.h"
@@ -1055,10 +1054,6 @@ static void mtk_jpeg_clk_on(struct mtk_jpeg_dev *jpeg)
 {
 	int ret;
 
-	ret = mtk_smi_larb_get(jpeg->larb);
-	if (ret)
-		dev_err(jpeg->dev, "mtk_smi_larb_get larbvdec fail %d\n", ret);
-
 	ret = clk_bulk_prepare_enable(jpeg->variant->num_clks,
 				      jpeg->variant->clks);
 	if (ret)
@@ -1069,7 +1064,6 @@ static void mtk_jpeg_clk_off(struct mtk_jpeg_dev *jpeg)
 {
 	clk_bulk_disable_unprepare(jpeg->variant->num_clks,
 				   jpeg->variant->clks);
-	mtk_smi_larb_put(jpeg->larb);
 }
 
 static irqreturn_t mtk_jpeg_enc_done(struct mtk_jpeg_dev *jpeg)
@@ -1284,35 +1278,6 @@ static struct clk_bulk_data mtk_jpeg_clocks[] = {
 	{ .id = "jpgenc" },
 };
 
-static int mtk_jpeg_clk_init(struct mtk_jpeg_dev *jpeg)
-{
-	struct device_node *node;
-	struct platform_device *pdev;
-	int ret;
-
-	node = of_parse_phandle(jpeg->dev->of_node, "mediatek,larb", 0);
-	if (!node)
-		return -EINVAL;
-	pdev = of_find_device_by_node(node);
-	if (WARN_ON(!pdev)) {
-		of_node_put(node);
-		return -EINVAL;
-	}
-	of_node_put(node);
-
-	jpeg->larb = &pdev->dev;
-
-	ret = devm_clk_bulk_get(jpeg->dev, jpeg->variant->num_clks,
-				jpeg->variant->clks);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to get jpeg clock:%d\n", ret);
-		put_device(&pdev->dev);
-		return ret;
-	}
-
-	return 0;
-}
-
 static void mtk_jpeg_job_timeout_work(struct work_struct *work)
 {
 	struct mtk_jpeg_dev *jpeg = container_of(work, struct mtk_jpeg_dev,
@@ -1333,11 +1298,6 @@ static void mtk_jpeg_job_timeout_work(struct work_struct *work)
 	v4l2_m2m_job_finish(jpeg->m2m_dev, ctx->fh.m2m_ctx);
 }
 
-static inline void mtk_jpeg_clk_release(struct mtk_jpeg_dev *jpeg)
-{
-	put_device(jpeg->larb);
-}
-
 static int mtk_jpeg_probe(struct platform_device *pdev)
 {
 	struct mtk_jpeg_dev *jpeg;
@@ -1376,7 +1336,8 @@ static int mtk_jpeg_probe(struct platform_device *pdev)
 		goto err_req_irq;
 	}
 
-	ret = mtk_jpeg_clk_init(jpeg);
+	ret = devm_clk_bulk_get(jpeg->dev, jpeg->variant->num_clks,
+				jpeg->variant->clks);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to init clk, err %d\n", ret);
 		goto err_clk_init;
@@ -1442,7 +1403,6 @@ static int mtk_jpeg_probe(struct platform_device *pdev)
 	v4l2_device_unregister(&jpeg->v4l2_dev);
 
 err_dev_register:
-	mtk_jpeg_clk_release(jpeg);
 
 err_clk_init:
 
@@ -1460,7 +1420,6 @@ static int mtk_jpeg_remove(struct platform_device *pdev)
 	video_device_release(jpeg->vdev);
 	v4l2_m2m_release(jpeg->m2m_dev);
 	v4l2_device_unregister(&jpeg->v4l2_dev);
-	mtk_jpeg_clk_release(jpeg);
 
 	return 0;
 }
diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
index 595f7f10c9fd..3e4811a41ba2 100644
--- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
@@ -85,7 +85,6 @@ struct mtk_jpeg_variant {
  * @alloc_ctx:		videobuf2 memory allocator's context
  * @vdev:		video device node for jpeg mem2mem mode
  * @reg_base:		JPEG registers mapping
- * @larb:		SMI device
  * @job_timeout_work:	IRQ timeout structure
  * @variant:		driver variant to be used
  */
@@ -99,7 +98,6 @@ struct mtk_jpeg_dev {
 	void			*alloc_ctx;
 	struct video_device	*vdev;
 	void __iomem		*reg_base;
-	struct device		*larb;
 	struct delayed_work job_timeout_work;
 	const struct mtk_jpeg_variant *variant;
 };
-- 
2.18.0


^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 05/12] media: mtk-jpeg: Get rid of mtk_smi_larb_get/put
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich, Rick Chang, Xia Jiang

MediaTek IOMMU has already added device_link between the consumer
and smi-larb device. If the jpg device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.

After removing the larb_get operations, then mtk_jpeg_clk_init is
also unnecessary. Remove it too.

CC: Rick Chang <rick.chang@mediatek.com>
CC: Xia Jiang <xia.jiang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: Rick Chang <rick.chang@mediatek.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 .../media/platform/mtk-jpeg/mtk_jpeg_core.c   | 45 +------------------
 .../media/platform/mtk-jpeg/mtk_jpeg_core.h   |  2 -
 2 files changed, 2 insertions(+), 45 deletions(-)

diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
index a89c7b206eef..4fea2c512434 100644
--- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
@@ -22,7 +22,6 @@
 #include <media/v4l2-ioctl.h>
 #include <media/videobuf2-core.h>
 #include <media/videobuf2-dma-contig.h>
-#include <soc/mediatek/smi.h>
 
 #include "mtk_jpeg_enc_hw.h"
 #include "mtk_jpeg_dec_hw.h"
@@ -1055,10 +1054,6 @@ static void mtk_jpeg_clk_on(struct mtk_jpeg_dev *jpeg)
 {
 	int ret;
 
-	ret = mtk_smi_larb_get(jpeg->larb);
-	if (ret)
-		dev_err(jpeg->dev, "mtk_smi_larb_get larbvdec fail %d\n", ret);
-
 	ret = clk_bulk_prepare_enable(jpeg->variant->num_clks,
 				      jpeg->variant->clks);
 	if (ret)
@@ -1069,7 +1064,6 @@ static void mtk_jpeg_clk_off(struct mtk_jpeg_dev *jpeg)
 {
 	clk_bulk_disable_unprepare(jpeg->variant->num_clks,
 				   jpeg->variant->clks);
-	mtk_smi_larb_put(jpeg->larb);
 }
 
 static irqreturn_t mtk_jpeg_enc_done(struct mtk_jpeg_dev *jpeg)
@@ -1284,35 +1278,6 @@ static struct clk_bulk_data mtk_jpeg_clocks[] = {
 	{ .id = "jpgenc" },
 };
 
-static int mtk_jpeg_clk_init(struct mtk_jpeg_dev *jpeg)
-{
-	struct device_node *node;
-	struct platform_device *pdev;
-	int ret;
-
-	node = of_parse_phandle(jpeg->dev->of_node, "mediatek,larb", 0);
-	if (!node)
-		return -EINVAL;
-	pdev = of_find_device_by_node(node);
-	if (WARN_ON(!pdev)) {
-		of_node_put(node);
-		return -EINVAL;
-	}
-	of_node_put(node);
-
-	jpeg->larb = &pdev->dev;
-
-	ret = devm_clk_bulk_get(jpeg->dev, jpeg->variant->num_clks,
-				jpeg->variant->clks);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to get jpeg clock:%d\n", ret);
-		put_device(&pdev->dev);
-		return ret;
-	}
-
-	return 0;
-}
-
 static void mtk_jpeg_job_timeout_work(struct work_struct *work)
 {
 	struct mtk_jpeg_dev *jpeg = container_of(work, struct mtk_jpeg_dev,
@@ -1333,11 +1298,6 @@ static void mtk_jpeg_job_timeout_work(struct work_struct *work)
 	v4l2_m2m_job_finish(jpeg->m2m_dev, ctx->fh.m2m_ctx);
 }
 
-static inline void mtk_jpeg_clk_release(struct mtk_jpeg_dev *jpeg)
-{
-	put_device(jpeg->larb);
-}
-
 static int mtk_jpeg_probe(struct platform_device *pdev)
 {
 	struct mtk_jpeg_dev *jpeg;
@@ -1376,7 +1336,8 @@ static int mtk_jpeg_probe(struct platform_device *pdev)
 		goto err_req_irq;
 	}
 
-	ret = mtk_jpeg_clk_init(jpeg);
+	ret = devm_clk_bulk_get(jpeg->dev, jpeg->variant->num_clks,
+				jpeg->variant->clks);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to init clk, err %d\n", ret);
 		goto err_clk_init;
@@ -1442,7 +1403,6 @@ static int mtk_jpeg_probe(struct platform_device *pdev)
 	v4l2_device_unregister(&jpeg->v4l2_dev);
 
 err_dev_register:
-	mtk_jpeg_clk_release(jpeg);
 
 err_clk_init:
 
@@ -1460,7 +1420,6 @@ static int mtk_jpeg_remove(struct platform_device *pdev)
 	video_device_release(jpeg->vdev);
 	v4l2_m2m_release(jpeg->m2m_dev);
 	v4l2_device_unregister(&jpeg->v4l2_dev);
-	mtk_jpeg_clk_release(jpeg);
 
 	return 0;
 }
diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
index 595f7f10c9fd..3e4811a41ba2 100644
--- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
@@ -85,7 +85,6 @@ struct mtk_jpeg_variant {
  * @alloc_ctx:		videobuf2 memory allocator's context
  * @vdev:		video device node for jpeg mem2mem mode
  * @reg_base:		JPEG registers mapping
- * @larb:		SMI device
  * @job_timeout_work:	IRQ timeout structure
  * @variant:		driver variant to be used
  */
@@ -99,7 +98,6 @@ struct mtk_jpeg_dev {
 	void			*alloc_ctx;
 	struct video_device	*vdev;
 	void __iomem		*reg_base;
-	struct device		*larb;
 	struct delayed_work job_timeout_work;
 	const struct mtk_jpeg_variant *variant;
 };
-- 
2.18.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 05/12] media: mtk-jpeg: Get rid of mtk_smi_larb_get/put
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich, Rick Chang, Xia Jiang

MediaTek IOMMU has already added device_link between the consumer
and smi-larb device. If the jpg device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.

After removing the larb_get operations, then mtk_jpeg_clk_init is
also unnecessary. Remove it too.

CC: Rick Chang <rick.chang@mediatek.com>
CC: Xia Jiang <xia.jiang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: Rick Chang <rick.chang@mediatek.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 .../media/platform/mtk-jpeg/mtk_jpeg_core.c   | 45 +------------------
 .../media/platform/mtk-jpeg/mtk_jpeg_core.h   |  2 -
 2 files changed, 2 insertions(+), 45 deletions(-)

diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
index a89c7b206eef..4fea2c512434 100644
--- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
@@ -22,7 +22,6 @@
 #include <media/v4l2-ioctl.h>
 #include <media/videobuf2-core.h>
 #include <media/videobuf2-dma-contig.h>
-#include <soc/mediatek/smi.h>
 
 #include "mtk_jpeg_enc_hw.h"
 #include "mtk_jpeg_dec_hw.h"
@@ -1055,10 +1054,6 @@ static void mtk_jpeg_clk_on(struct mtk_jpeg_dev *jpeg)
 {
 	int ret;
 
-	ret = mtk_smi_larb_get(jpeg->larb);
-	if (ret)
-		dev_err(jpeg->dev, "mtk_smi_larb_get larbvdec fail %d\n", ret);
-
 	ret = clk_bulk_prepare_enable(jpeg->variant->num_clks,
 				      jpeg->variant->clks);
 	if (ret)
@@ -1069,7 +1064,6 @@ static void mtk_jpeg_clk_off(struct mtk_jpeg_dev *jpeg)
 {
 	clk_bulk_disable_unprepare(jpeg->variant->num_clks,
 				   jpeg->variant->clks);
-	mtk_smi_larb_put(jpeg->larb);
 }
 
 static irqreturn_t mtk_jpeg_enc_done(struct mtk_jpeg_dev *jpeg)
@@ -1284,35 +1278,6 @@ static struct clk_bulk_data mtk_jpeg_clocks[] = {
 	{ .id = "jpgenc" },
 };
 
-static int mtk_jpeg_clk_init(struct mtk_jpeg_dev *jpeg)
-{
-	struct device_node *node;
-	struct platform_device *pdev;
-	int ret;
-
-	node = of_parse_phandle(jpeg->dev->of_node, "mediatek,larb", 0);
-	if (!node)
-		return -EINVAL;
-	pdev = of_find_device_by_node(node);
-	if (WARN_ON(!pdev)) {
-		of_node_put(node);
-		return -EINVAL;
-	}
-	of_node_put(node);
-
-	jpeg->larb = &pdev->dev;
-
-	ret = devm_clk_bulk_get(jpeg->dev, jpeg->variant->num_clks,
-				jpeg->variant->clks);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to get jpeg clock:%d\n", ret);
-		put_device(&pdev->dev);
-		return ret;
-	}
-
-	return 0;
-}
-
 static void mtk_jpeg_job_timeout_work(struct work_struct *work)
 {
 	struct mtk_jpeg_dev *jpeg = container_of(work, struct mtk_jpeg_dev,
@@ -1333,11 +1298,6 @@ static void mtk_jpeg_job_timeout_work(struct work_struct *work)
 	v4l2_m2m_job_finish(jpeg->m2m_dev, ctx->fh.m2m_ctx);
 }
 
-static inline void mtk_jpeg_clk_release(struct mtk_jpeg_dev *jpeg)
-{
-	put_device(jpeg->larb);
-}
-
 static int mtk_jpeg_probe(struct platform_device *pdev)
 {
 	struct mtk_jpeg_dev *jpeg;
@@ -1376,7 +1336,8 @@ static int mtk_jpeg_probe(struct platform_device *pdev)
 		goto err_req_irq;
 	}
 
-	ret = mtk_jpeg_clk_init(jpeg);
+	ret = devm_clk_bulk_get(jpeg->dev, jpeg->variant->num_clks,
+				jpeg->variant->clks);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to init clk, err %d\n", ret);
 		goto err_clk_init;
@@ -1442,7 +1403,6 @@ static int mtk_jpeg_probe(struct platform_device *pdev)
 	v4l2_device_unregister(&jpeg->v4l2_dev);
 
 err_dev_register:
-	mtk_jpeg_clk_release(jpeg);
 
 err_clk_init:
 
@@ -1460,7 +1420,6 @@ static int mtk_jpeg_remove(struct platform_device *pdev)
 	video_device_release(jpeg->vdev);
 	v4l2_m2m_release(jpeg->m2m_dev);
 	v4l2_device_unregister(&jpeg->v4l2_dev);
-	mtk_jpeg_clk_release(jpeg);
 
 	return 0;
 }
diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
index 595f7f10c9fd..3e4811a41ba2 100644
--- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
@@ -85,7 +85,6 @@ struct mtk_jpeg_variant {
  * @alloc_ctx:		videobuf2 memory allocator's context
  * @vdev:		video device node for jpeg mem2mem mode
  * @reg_base:		JPEG registers mapping
- * @larb:		SMI device
  * @job_timeout_work:	IRQ timeout structure
  * @variant:		driver variant to be used
  */
@@ -99,7 +98,6 @@ struct mtk_jpeg_dev {
 	void			*alloc_ctx;
 	struct video_device	*vdev;
 	void __iomem		*reg_base;
-	struct device		*larb;
 	struct delayed_work job_timeout_work;
 	const struct mtk_jpeg_variant *variant;
 };
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 06/12] media: mtk-mdp: Get rid of mtk_smi_larb_get/put
  2021-09-29  1:37 ` Yong Wu
                     ` (2 preceding siblings ...)
  (?)
@ 2021-09-29  1:37   ` Yong Wu
  -1 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich, Minghsiu Tsai, Houlong Wei

MediaTek IOMMU has already added the device_link between the consumer
and smi-larb device. If the mdp device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.

CC: Minghsiu Tsai <minghsiu.tsai@mediatek.com>
CC: Houlong Wei <houlong.wei@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Houlong Wei <houlong.wei@mediatek.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
---
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.c | 40 -------------------
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.h |  2 -
 drivers/media/platform/mtk-mdp/mtk_mdp_core.c |  1 -
 3 files changed, 43 deletions(-)

diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
index b3426a551bea..1e3833f1c9ae 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
@@ -9,7 +9,6 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
-#include <soc/mediatek/smi.h>
 
 #include "mtk_mdp_comp.h"
 
@@ -18,14 +17,6 @@ void mtk_mdp_comp_clock_on(struct device *dev, struct mtk_mdp_comp *comp)
 {
 	int i, err;
 
-	if (comp->larb_dev) {
-		err = mtk_smi_larb_get(comp->larb_dev);
-		if (err)
-			dev_err(dev,
-				"failed to get larb, err %d. type:%d\n",
-				err, comp->type);
-	}
-
 	for (i = 0; i < ARRAY_SIZE(comp->clk); i++) {
 		if (IS_ERR(comp->clk[i]))
 			continue;
@@ -46,17 +37,12 @@ void mtk_mdp_comp_clock_off(struct device *dev, struct mtk_mdp_comp *comp)
 			continue;
 		clk_disable_unprepare(comp->clk[i]);
 	}
-
-	if (comp->larb_dev)
-		mtk_smi_larb_put(comp->larb_dev);
 }
 
 int mtk_mdp_comp_init(struct device *dev, struct device_node *node,
 		      struct mtk_mdp_comp *comp,
 		      enum mtk_mdp_comp_type comp_type)
 {
-	struct device_node *larb_node;
-	struct platform_device *larb_pdev;
 	int ret;
 	int i;
 
@@ -77,32 +63,6 @@ int mtk_mdp_comp_init(struct device *dev, struct device_node *node,
 			break;
 	}
 
-	/* Only DMA capable components need the LARB property */
-	comp->larb_dev = NULL;
-	if (comp->type != MTK_MDP_RDMA &&
-	    comp->type != MTK_MDP_WDMA &&
-	    comp->type != MTK_MDP_WROT)
-		return 0;
-
-	larb_node = of_parse_phandle(node, "mediatek,larb", 0);
-	if (!larb_node) {
-		dev_err(dev,
-			"Missing mediadek,larb phandle in %pOF node\n", node);
-		ret = -EINVAL;
-		goto put_dev;
-	}
-
-	larb_pdev = of_find_device_by_node(larb_node);
-	if (!larb_pdev) {
-		dev_warn(dev, "Waiting for larb device %pOF\n", larb_node);
-		of_node_put(larb_node);
-		ret = -EPROBE_DEFER;
-		goto put_dev;
-	}
-	of_node_put(larb_node);
-
-	comp->larb_dev = &larb_pdev->dev;
-
 	return 0;
 
 put_dev:
diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h
index 7897766c96bb..ae41dd3cd72a 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h
@@ -26,14 +26,12 @@ enum mtk_mdp_comp_type {
  * @node:	list node to track sibing MDP components
  * @dev_node:	component device node
  * @clk:	clocks required for component
- * @larb_dev:	SMI device required for component
  * @type:	component type
  */
 struct mtk_mdp_comp {
 	struct list_head	node;
 	struct device_node	*dev_node;
 	struct clk		*clk[2];
-	struct device		*larb_dev;
 	enum mtk_mdp_comp_type	type;
 };
 
diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_core.c b/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
index 976aa1f4829b..70a8eab16863 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
@@ -17,7 +17,6 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/workqueue.h>
-#include <soc/mediatek/smi.h>
 
 #include "mtk_mdp_core.h"
 #include "mtk_mdp_m2m.h"
-- 
2.18.0


^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 06/12] media: mtk-mdp: Get rid of mtk_smi_larb_get/put
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Dafna Hirschfeld, Chun-Kuang Hu, Will Deacon, dri-devel,
	anthony.huang, youlin.pei, Evan Green, Eizan Miyamoto,
	Matthias Kaehlcke, linux-arm-kernel, linux-media, devicetree,
	Philipp Zabel, Frank Wunderlich, Houlong Wei, yi.kuo,
	linux-mediatek, Hsin-Yi Wang, Tiffany Lin, anan.sun,
	srv_heupstream, acourbot, Minghsiu Tsai, linux-kernel, iommu,
	Daniel Vetter, Robin Murphy

MediaTek IOMMU has already added the device_link between the consumer
and smi-larb device. If the mdp device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.

CC: Minghsiu Tsai <minghsiu.tsai@mediatek.com>
CC: Houlong Wei <houlong.wei@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Houlong Wei <houlong.wei@mediatek.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
---
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.c | 40 -------------------
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.h |  2 -
 drivers/media/platform/mtk-mdp/mtk_mdp_core.c |  1 -
 3 files changed, 43 deletions(-)

diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
index b3426a551bea..1e3833f1c9ae 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
@@ -9,7 +9,6 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
-#include <soc/mediatek/smi.h>
 
 #include "mtk_mdp_comp.h"
 
@@ -18,14 +17,6 @@ void mtk_mdp_comp_clock_on(struct device *dev, struct mtk_mdp_comp *comp)
 {
 	int i, err;
 
-	if (comp->larb_dev) {
-		err = mtk_smi_larb_get(comp->larb_dev);
-		if (err)
-			dev_err(dev,
-				"failed to get larb, err %d. type:%d\n",
-				err, comp->type);
-	}
-
 	for (i = 0; i < ARRAY_SIZE(comp->clk); i++) {
 		if (IS_ERR(comp->clk[i]))
 			continue;
@@ -46,17 +37,12 @@ void mtk_mdp_comp_clock_off(struct device *dev, struct mtk_mdp_comp *comp)
 			continue;
 		clk_disable_unprepare(comp->clk[i]);
 	}
-
-	if (comp->larb_dev)
-		mtk_smi_larb_put(comp->larb_dev);
 }
 
 int mtk_mdp_comp_init(struct device *dev, struct device_node *node,
 		      struct mtk_mdp_comp *comp,
 		      enum mtk_mdp_comp_type comp_type)
 {
-	struct device_node *larb_node;
-	struct platform_device *larb_pdev;
 	int ret;
 	int i;
 
@@ -77,32 +63,6 @@ int mtk_mdp_comp_init(struct device *dev, struct device_node *node,
 			break;
 	}
 
-	/* Only DMA capable components need the LARB property */
-	comp->larb_dev = NULL;
-	if (comp->type != MTK_MDP_RDMA &&
-	    comp->type != MTK_MDP_WDMA &&
-	    comp->type != MTK_MDP_WROT)
-		return 0;
-
-	larb_node = of_parse_phandle(node, "mediatek,larb", 0);
-	if (!larb_node) {
-		dev_err(dev,
-			"Missing mediadek,larb phandle in %pOF node\n", node);
-		ret = -EINVAL;
-		goto put_dev;
-	}
-
-	larb_pdev = of_find_device_by_node(larb_node);
-	if (!larb_pdev) {
-		dev_warn(dev, "Waiting for larb device %pOF\n", larb_node);
-		of_node_put(larb_node);
-		ret = -EPROBE_DEFER;
-		goto put_dev;
-	}
-	of_node_put(larb_node);
-
-	comp->larb_dev = &larb_pdev->dev;
-
 	return 0;
 
 put_dev:
diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h
index 7897766c96bb..ae41dd3cd72a 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h
@@ -26,14 +26,12 @@ enum mtk_mdp_comp_type {
  * @node:	list node to track sibing MDP components
  * @dev_node:	component device node
  * @clk:	clocks required for component
- * @larb_dev:	SMI device required for component
  * @type:	component type
  */
 struct mtk_mdp_comp {
 	struct list_head	node;
 	struct device_node	*dev_node;
 	struct clk		*clk[2];
-	struct device		*larb_dev;
 	enum mtk_mdp_comp_type	type;
 };
 
diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_core.c b/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
index 976aa1f4829b..70a8eab16863 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
@@ -17,7 +17,6 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/workqueue.h>
-#include <soc/mediatek/smi.h>
 
 #include "mtk_mdp_core.h"
 #include "mtk_mdp_m2m.h"
-- 
2.18.0

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 06/12] media: mtk-mdp: Get rid of mtk_smi_larb_get/put
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich, Minghsiu Tsai, Houlong Wei

MediaTek IOMMU has already added the device_link between the consumer
and smi-larb device. If the mdp device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.

CC: Minghsiu Tsai <minghsiu.tsai@mediatek.com>
CC: Houlong Wei <houlong.wei@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Houlong Wei <houlong.wei@mediatek.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
---
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.c | 40 -------------------
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.h |  2 -
 drivers/media/platform/mtk-mdp/mtk_mdp_core.c |  1 -
 3 files changed, 43 deletions(-)

diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
index b3426a551bea..1e3833f1c9ae 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
@@ -9,7 +9,6 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
-#include <soc/mediatek/smi.h>
 
 #include "mtk_mdp_comp.h"
 
@@ -18,14 +17,6 @@ void mtk_mdp_comp_clock_on(struct device *dev, struct mtk_mdp_comp *comp)
 {
 	int i, err;
 
-	if (comp->larb_dev) {
-		err = mtk_smi_larb_get(comp->larb_dev);
-		if (err)
-			dev_err(dev,
-				"failed to get larb, err %d. type:%d\n",
-				err, comp->type);
-	}
-
 	for (i = 0; i < ARRAY_SIZE(comp->clk); i++) {
 		if (IS_ERR(comp->clk[i]))
 			continue;
@@ -46,17 +37,12 @@ void mtk_mdp_comp_clock_off(struct device *dev, struct mtk_mdp_comp *comp)
 			continue;
 		clk_disable_unprepare(comp->clk[i]);
 	}
-
-	if (comp->larb_dev)
-		mtk_smi_larb_put(comp->larb_dev);
 }
 
 int mtk_mdp_comp_init(struct device *dev, struct device_node *node,
 		      struct mtk_mdp_comp *comp,
 		      enum mtk_mdp_comp_type comp_type)
 {
-	struct device_node *larb_node;
-	struct platform_device *larb_pdev;
 	int ret;
 	int i;
 
@@ -77,32 +63,6 @@ int mtk_mdp_comp_init(struct device *dev, struct device_node *node,
 			break;
 	}
 
-	/* Only DMA capable components need the LARB property */
-	comp->larb_dev = NULL;
-	if (comp->type != MTK_MDP_RDMA &&
-	    comp->type != MTK_MDP_WDMA &&
-	    comp->type != MTK_MDP_WROT)
-		return 0;
-
-	larb_node = of_parse_phandle(node, "mediatek,larb", 0);
-	if (!larb_node) {
-		dev_err(dev,
-			"Missing mediadek,larb phandle in %pOF node\n", node);
-		ret = -EINVAL;
-		goto put_dev;
-	}
-
-	larb_pdev = of_find_device_by_node(larb_node);
-	if (!larb_pdev) {
-		dev_warn(dev, "Waiting for larb device %pOF\n", larb_node);
-		of_node_put(larb_node);
-		ret = -EPROBE_DEFER;
-		goto put_dev;
-	}
-	of_node_put(larb_node);
-
-	comp->larb_dev = &larb_pdev->dev;
-
 	return 0;
 
 put_dev:
diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h
index 7897766c96bb..ae41dd3cd72a 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h
@@ -26,14 +26,12 @@ enum mtk_mdp_comp_type {
  * @node:	list node to track sibing MDP components
  * @dev_node:	component device node
  * @clk:	clocks required for component
- * @larb_dev:	SMI device required for component
  * @type:	component type
  */
 struct mtk_mdp_comp {
 	struct list_head	node;
 	struct device_node	*dev_node;
 	struct clk		*clk[2];
-	struct device		*larb_dev;
 	enum mtk_mdp_comp_type	type;
 };
 
diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_core.c b/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
index 976aa1f4829b..70a8eab16863 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
@@ -17,7 +17,6 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/workqueue.h>
-#include <soc/mediatek/smi.h>
 
 #include "mtk_mdp_core.h"
 #include "mtk_mdp_m2m.h"
-- 
2.18.0


^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 06/12] media: mtk-mdp: Get rid of mtk_smi_larb_get/put
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich, Minghsiu Tsai, Houlong Wei

MediaTek IOMMU has already added the device_link between the consumer
and smi-larb device. If the mdp device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.

CC: Minghsiu Tsai <minghsiu.tsai@mediatek.com>
CC: Houlong Wei <houlong.wei@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Houlong Wei <houlong.wei@mediatek.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
---
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.c | 40 -------------------
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.h |  2 -
 drivers/media/platform/mtk-mdp/mtk_mdp_core.c |  1 -
 3 files changed, 43 deletions(-)

diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
index b3426a551bea..1e3833f1c9ae 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
@@ -9,7 +9,6 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
-#include <soc/mediatek/smi.h>
 
 #include "mtk_mdp_comp.h"
 
@@ -18,14 +17,6 @@ void mtk_mdp_comp_clock_on(struct device *dev, struct mtk_mdp_comp *comp)
 {
 	int i, err;
 
-	if (comp->larb_dev) {
-		err = mtk_smi_larb_get(comp->larb_dev);
-		if (err)
-			dev_err(dev,
-				"failed to get larb, err %d. type:%d\n",
-				err, comp->type);
-	}
-
 	for (i = 0; i < ARRAY_SIZE(comp->clk); i++) {
 		if (IS_ERR(comp->clk[i]))
 			continue;
@@ -46,17 +37,12 @@ void mtk_mdp_comp_clock_off(struct device *dev, struct mtk_mdp_comp *comp)
 			continue;
 		clk_disable_unprepare(comp->clk[i]);
 	}
-
-	if (comp->larb_dev)
-		mtk_smi_larb_put(comp->larb_dev);
 }
 
 int mtk_mdp_comp_init(struct device *dev, struct device_node *node,
 		      struct mtk_mdp_comp *comp,
 		      enum mtk_mdp_comp_type comp_type)
 {
-	struct device_node *larb_node;
-	struct platform_device *larb_pdev;
 	int ret;
 	int i;
 
@@ -77,32 +63,6 @@ int mtk_mdp_comp_init(struct device *dev, struct device_node *node,
 			break;
 	}
 
-	/* Only DMA capable components need the LARB property */
-	comp->larb_dev = NULL;
-	if (comp->type != MTK_MDP_RDMA &&
-	    comp->type != MTK_MDP_WDMA &&
-	    comp->type != MTK_MDP_WROT)
-		return 0;
-
-	larb_node = of_parse_phandle(node, "mediatek,larb", 0);
-	if (!larb_node) {
-		dev_err(dev,
-			"Missing mediadek,larb phandle in %pOF node\n", node);
-		ret = -EINVAL;
-		goto put_dev;
-	}
-
-	larb_pdev = of_find_device_by_node(larb_node);
-	if (!larb_pdev) {
-		dev_warn(dev, "Waiting for larb device %pOF\n", larb_node);
-		of_node_put(larb_node);
-		ret = -EPROBE_DEFER;
-		goto put_dev;
-	}
-	of_node_put(larb_node);
-
-	comp->larb_dev = &larb_pdev->dev;
-
 	return 0;
 
 put_dev:
diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h
index 7897766c96bb..ae41dd3cd72a 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h
@@ -26,14 +26,12 @@ enum mtk_mdp_comp_type {
  * @node:	list node to track sibing MDP components
  * @dev_node:	component device node
  * @clk:	clocks required for component
- * @larb_dev:	SMI device required for component
  * @type:	component type
  */
 struct mtk_mdp_comp {
 	struct list_head	node;
 	struct device_node	*dev_node;
 	struct clk		*clk[2];
-	struct device		*larb_dev;
 	enum mtk_mdp_comp_type	type;
 };
 
diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_core.c b/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
index 976aa1f4829b..70a8eab16863 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
@@ -17,7 +17,6 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/workqueue.h>
-#include <soc/mediatek/smi.h>
 
 #include "mtk_mdp_core.h"
 #include "mtk_mdp_m2m.h"
-- 
2.18.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 06/12] media: mtk-mdp: Get rid of mtk_smi_larb_get/put
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich, Minghsiu Tsai, Houlong Wei

MediaTek IOMMU has already added the device_link between the consumer
and smi-larb device. If the mdp device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.

CC: Minghsiu Tsai <minghsiu.tsai@mediatek.com>
CC: Houlong Wei <houlong.wei@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Houlong Wei <houlong.wei@mediatek.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
---
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.c | 40 -------------------
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.h |  2 -
 drivers/media/platform/mtk-mdp/mtk_mdp_core.c |  1 -
 3 files changed, 43 deletions(-)

diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
index b3426a551bea..1e3833f1c9ae 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
@@ -9,7 +9,6 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
-#include <soc/mediatek/smi.h>
 
 #include "mtk_mdp_comp.h"
 
@@ -18,14 +17,6 @@ void mtk_mdp_comp_clock_on(struct device *dev, struct mtk_mdp_comp *comp)
 {
 	int i, err;
 
-	if (comp->larb_dev) {
-		err = mtk_smi_larb_get(comp->larb_dev);
-		if (err)
-			dev_err(dev,
-				"failed to get larb, err %d. type:%d\n",
-				err, comp->type);
-	}
-
 	for (i = 0; i < ARRAY_SIZE(comp->clk); i++) {
 		if (IS_ERR(comp->clk[i]))
 			continue;
@@ -46,17 +37,12 @@ void mtk_mdp_comp_clock_off(struct device *dev, struct mtk_mdp_comp *comp)
 			continue;
 		clk_disable_unprepare(comp->clk[i]);
 	}
-
-	if (comp->larb_dev)
-		mtk_smi_larb_put(comp->larb_dev);
 }
 
 int mtk_mdp_comp_init(struct device *dev, struct device_node *node,
 		      struct mtk_mdp_comp *comp,
 		      enum mtk_mdp_comp_type comp_type)
 {
-	struct device_node *larb_node;
-	struct platform_device *larb_pdev;
 	int ret;
 	int i;
 
@@ -77,32 +63,6 @@ int mtk_mdp_comp_init(struct device *dev, struct device_node *node,
 			break;
 	}
 
-	/* Only DMA capable components need the LARB property */
-	comp->larb_dev = NULL;
-	if (comp->type != MTK_MDP_RDMA &&
-	    comp->type != MTK_MDP_WDMA &&
-	    comp->type != MTK_MDP_WROT)
-		return 0;
-
-	larb_node = of_parse_phandle(node, "mediatek,larb", 0);
-	if (!larb_node) {
-		dev_err(dev,
-			"Missing mediadek,larb phandle in %pOF node\n", node);
-		ret = -EINVAL;
-		goto put_dev;
-	}
-
-	larb_pdev = of_find_device_by_node(larb_node);
-	if (!larb_pdev) {
-		dev_warn(dev, "Waiting for larb device %pOF\n", larb_node);
-		of_node_put(larb_node);
-		ret = -EPROBE_DEFER;
-		goto put_dev;
-	}
-	of_node_put(larb_node);
-
-	comp->larb_dev = &larb_pdev->dev;
-
 	return 0;
 
 put_dev:
diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h
index 7897766c96bb..ae41dd3cd72a 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h
@@ -26,14 +26,12 @@ enum mtk_mdp_comp_type {
  * @node:	list node to track sibing MDP components
  * @dev_node:	component device node
  * @clk:	clocks required for component
- * @larb_dev:	SMI device required for component
  * @type:	component type
  */
 struct mtk_mdp_comp {
 	struct list_head	node;
 	struct device_node	*dev_node;
 	struct clk		*clk[2];
-	struct device		*larb_dev;
 	enum mtk_mdp_comp_type	type;
 };
 
diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_core.c b/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
index 976aa1f4829b..70a8eab16863 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
@@ -17,7 +17,6 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/workqueue.h>
-#include <soc/mediatek/smi.h>
 
 #include "mtk_mdp_core.h"
 #include "mtk_mdp_m2m.h"
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 07/12] drm/mediatek: Add pm runtime support for ovl and rdma
  2021-09-29  1:37 ` Yong Wu
                     ` (2 preceding siblings ...)
  (?)
@ 2021-09-29  1:37   ` Yong Wu
  -1 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich, Yongqiang Niu, CK Hu

From: Yongqiang Niu <yongqiang.niu@mediatek.com>

Prepare for smi cleaning up "mediatek,larb".

Display use the dispsys device to call pm_rumtime_get_sync before.
This patch add pm_runtime_xx with ovl and rdma device whose nodes has
"iommus" property, then display could help pm_runtime_get for smi via
ovl or rdma device.

CC: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
(Yong: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync)
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c  |  8 +++++++-
 drivers/gpu/drm/mediatek/mtk_disp_rdma.c |  9 ++++++++-
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c  | 13 ++++++++++++-
 3 files changed, 27 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
index 5326989d5206..716eac6831f2 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
@@ -11,6 +11,7 @@
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/soc/mediatek/mtk-cmdq.h>
 
 #include "mtk_disp_drv.h"
@@ -414,9 +415,13 @@ static int mtk_disp_ovl_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	pm_runtime_enable(dev);
+
 	ret = component_add(dev, &mtk_disp_ovl_component_ops);
-	if (ret)
+	if (ret) {
+		pm_runtime_disable(dev);
 		dev_err(dev, "Failed to add component: %d\n", ret);
+	}
 
 	return ret;
 }
@@ -424,6 +429,7 @@ static int mtk_disp_ovl_probe(struct platform_device *pdev)
 static int mtk_disp_ovl_remove(struct platform_device *pdev)
 {
 	component_del(&pdev->dev, &mtk_disp_ovl_component_ops);
+	pm_runtime_disable(&pdev->dev);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
index 75d7f45579e2..251f034acb09 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
@@ -9,6 +9,7 @@
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/soc/mediatek/mtk-cmdq.h>
 
 #include "mtk_disp_drv.h"
@@ -327,9 +328,13 @@ static int mtk_disp_rdma_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, priv);
 
+	pm_runtime_enable(dev);
+
 	ret = component_add(dev, &mtk_disp_rdma_component_ops);
-	if (ret)
+	if (ret) {
+		pm_runtime_disable(dev);
 		dev_err(dev, "Failed to add component: %d\n", ret);
+	}
 
 	return ret;
 }
@@ -338,6 +343,8 @@ static int mtk_disp_rdma_remove(struct platform_device *pdev)
 {
 	component_del(&pdev->dev, &mtk_disp_rdma_component_ops);
 
+	pm_runtime_disable(&pdev->dev);
+
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 5f81489fc60c..455ea23c6130 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -649,9 +649,17 @@ static void mtk_drm_crtc_atomic_enable(struct drm_crtc *crtc,
 		return;
 	}
 
+	ret = pm_runtime_resume_and_get(comp->dev);
+	if (ret < 0) {
+		mtk_smi_larb_put(comp->larb_dev);
+		DRM_DEV_ERROR(comp->dev, "Failed to enable power domain: %d\n", ret);
+		return;
+	}
+
 	ret = mtk_crtc_ddp_hw_init(mtk_crtc);
 	if (ret) {
 		mtk_smi_larb_put(comp->larb_dev);
+		pm_runtime_put(comp->dev);
 		return;
 	}
 
@@ -664,7 +672,7 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
 {
 	struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
 	struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[0];
-	int i;
+	int i, ret;
 
 	DRM_DEBUG_DRIVER("%s %d\n", __func__, crtc->base.id);
 	if (!mtk_crtc->enabled)
@@ -688,6 +696,9 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
 	drm_crtc_vblank_off(crtc);
 	mtk_crtc_ddp_hw_fini(mtk_crtc);
 	mtk_smi_larb_put(comp->larb_dev);
+	ret = pm_runtime_put(comp->dev);
+	if (ret < 0)
+		DRM_DEV_ERROR(comp->dev, "Failed to disable power domain: %d\n", ret);
 
 	mtk_crtc->enabled = false;
 }
-- 
2.18.0


^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 07/12] drm/mediatek: Add pm runtime support for ovl and rdma
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Dafna Hirschfeld, Chun-Kuang Hu, Will Deacon, dri-devel,
	anthony.huang, youlin.pei, Evan Green, Eizan Miyamoto,
	Matthias Kaehlcke, linux-arm-kernel, Yongqiang Niu, CK Hu,
	linux-media, devicetree, Philipp Zabel, Frank Wunderlich, yi.kuo,
	linux-mediatek, Hsin-Yi Wang, Tiffany Lin, anan.sun,
	srv_heupstream, acourbot, linux-kernel, iommu, Daniel Vetter,
	Robin Murphy

From: Yongqiang Niu <yongqiang.niu@mediatek.com>

Prepare for smi cleaning up "mediatek,larb".

Display use the dispsys device to call pm_rumtime_get_sync before.
This patch add pm_runtime_xx with ovl and rdma device whose nodes has
"iommus" property, then display could help pm_runtime_get for smi via
ovl or rdma device.

CC: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
(Yong: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync)
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c  |  8 +++++++-
 drivers/gpu/drm/mediatek/mtk_disp_rdma.c |  9 ++++++++-
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c  | 13 ++++++++++++-
 3 files changed, 27 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
index 5326989d5206..716eac6831f2 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
@@ -11,6 +11,7 @@
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/soc/mediatek/mtk-cmdq.h>
 
 #include "mtk_disp_drv.h"
@@ -414,9 +415,13 @@ static int mtk_disp_ovl_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	pm_runtime_enable(dev);
+
 	ret = component_add(dev, &mtk_disp_ovl_component_ops);
-	if (ret)
+	if (ret) {
+		pm_runtime_disable(dev);
 		dev_err(dev, "Failed to add component: %d\n", ret);
+	}
 
 	return ret;
 }
@@ -424,6 +429,7 @@ static int mtk_disp_ovl_probe(struct platform_device *pdev)
 static int mtk_disp_ovl_remove(struct platform_device *pdev)
 {
 	component_del(&pdev->dev, &mtk_disp_ovl_component_ops);
+	pm_runtime_disable(&pdev->dev);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
index 75d7f45579e2..251f034acb09 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
@@ -9,6 +9,7 @@
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/soc/mediatek/mtk-cmdq.h>
 
 #include "mtk_disp_drv.h"
@@ -327,9 +328,13 @@ static int mtk_disp_rdma_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, priv);
 
+	pm_runtime_enable(dev);
+
 	ret = component_add(dev, &mtk_disp_rdma_component_ops);
-	if (ret)
+	if (ret) {
+		pm_runtime_disable(dev);
 		dev_err(dev, "Failed to add component: %d\n", ret);
+	}
 
 	return ret;
 }
@@ -338,6 +343,8 @@ static int mtk_disp_rdma_remove(struct platform_device *pdev)
 {
 	component_del(&pdev->dev, &mtk_disp_rdma_component_ops);
 
+	pm_runtime_disable(&pdev->dev);
+
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 5f81489fc60c..455ea23c6130 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -649,9 +649,17 @@ static void mtk_drm_crtc_atomic_enable(struct drm_crtc *crtc,
 		return;
 	}
 
+	ret = pm_runtime_resume_and_get(comp->dev);
+	if (ret < 0) {
+		mtk_smi_larb_put(comp->larb_dev);
+		DRM_DEV_ERROR(comp->dev, "Failed to enable power domain: %d\n", ret);
+		return;
+	}
+
 	ret = mtk_crtc_ddp_hw_init(mtk_crtc);
 	if (ret) {
 		mtk_smi_larb_put(comp->larb_dev);
+		pm_runtime_put(comp->dev);
 		return;
 	}
 
@@ -664,7 +672,7 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
 {
 	struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
 	struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[0];
-	int i;
+	int i, ret;
 
 	DRM_DEBUG_DRIVER("%s %d\n", __func__, crtc->base.id);
 	if (!mtk_crtc->enabled)
@@ -688,6 +696,9 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
 	drm_crtc_vblank_off(crtc);
 	mtk_crtc_ddp_hw_fini(mtk_crtc);
 	mtk_smi_larb_put(comp->larb_dev);
+	ret = pm_runtime_put(comp->dev);
+	if (ret < 0)
+		DRM_DEV_ERROR(comp->dev, "Failed to disable power domain: %d\n", ret);
 
 	mtk_crtc->enabled = false;
 }
-- 
2.18.0

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 07/12] drm/mediatek: Add pm runtime support for ovl and rdma
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich, Yongqiang Niu, CK Hu

From: Yongqiang Niu <yongqiang.niu@mediatek.com>

Prepare for smi cleaning up "mediatek,larb".

Display use the dispsys device to call pm_rumtime_get_sync before.
This patch add pm_runtime_xx with ovl and rdma device whose nodes has
"iommus" property, then display could help pm_runtime_get for smi via
ovl or rdma device.

CC: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
(Yong: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync)
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c  |  8 +++++++-
 drivers/gpu/drm/mediatek/mtk_disp_rdma.c |  9 ++++++++-
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c  | 13 ++++++++++++-
 3 files changed, 27 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
index 5326989d5206..716eac6831f2 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
@@ -11,6 +11,7 @@
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/soc/mediatek/mtk-cmdq.h>
 
 #include "mtk_disp_drv.h"
@@ -414,9 +415,13 @@ static int mtk_disp_ovl_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	pm_runtime_enable(dev);
+
 	ret = component_add(dev, &mtk_disp_ovl_component_ops);
-	if (ret)
+	if (ret) {
+		pm_runtime_disable(dev);
 		dev_err(dev, "Failed to add component: %d\n", ret);
+	}
 
 	return ret;
 }
@@ -424,6 +429,7 @@ static int mtk_disp_ovl_probe(struct platform_device *pdev)
 static int mtk_disp_ovl_remove(struct platform_device *pdev)
 {
 	component_del(&pdev->dev, &mtk_disp_ovl_component_ops);
+	pm_runtime_disable(&pdev->dev);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
index 75d7f45579e2..251f034acb09 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
@@ -9,6 +9,7 @@
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/soc/mediatek/mtk-cmdq.h>
 
 #include "mtk_disp_drv.h"
@@ -327,9 +328,13 @@ static int mtk_disp_rdma_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, priv);
 
+	pm_runtime_enable(dev);
+
 	ret = component_add(dev, &mtk_disp_rdma_component_ops);
-	if (ret)
+	if (ret) {
+		pm_runtime_disable(dev);
 		dev_err(dev, "Failed to add component: %d\n", ret);
+	}
 
 	return ret;
 }
@@ -338,6 +343,8 @@ static int mtk_disp_rdma_remove(struct platform_device *pdev)
 {
 	component_del(&pdev->dev, &mtk_disp_rdma_component_ops);
 
+	pm_runtime_disable(&pdev->dev);
+
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 5f81489fc60c..455ea23c6130 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -649,9 +649,17 @@ static void mtk_drm_crtc_atomic_enable(struct drm_crtc *crtc,
 		return;
 	}
 
+	ret = pm_runtime_resume_and_get(comp->dev);
+	if (ret < 0) {
+		mtk_smi_larb_put(comp->larb_dev);
+		DRM_DEV_ERROR(comp->dev, "Failed to enable power domain: %d\n", ret);
+		return;
+	}
+
 	ret = mtk_crtc_ddp_hw_init(mtk_crtc);
 	if (ret) {
 		mtk_smi_larb_put(comp->larb_dev);
+		pm_runtime_put(comp->dev);
 		return;
 	}
 
@@ -664,7 +672,7 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
 {
 	struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
 	struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[0];
-	int i;
+	int i, ret;
 
 	DRM_DEBUG_DRIVER("%s %d\n", __func__, crtc->base.id);
 	if (!mtk_crtc->enabled)
@@ -688,6 +696,9 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
 	drm_crtc_vblank_off(crtc);
 	mtk_crtc_ddp_hw_fini(mtk_crtc);
 	mtk_smi_larb_put(comp->larb_dev);
+	ret = pm_runtime_put(comp->dev);
+	if (ret < 0)
+		DRM_DEV_ERROR(comp->dev, "Failed to disable power domain: %d\n", ret);
 
 	mtk_crtc->enabled = false;
 }
-- 
2.18.0


^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 07/12] drm/mediatek: Add pm runtime support for ovl and rdma
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich, Yongqiang Niu, CK Hu

From: Yongqiang Niu <yongqiang.niu@mediatek.com>

Prepare for smi cleaning up "mediatek,larb".

Display use the dispsys device to call pm_rumtime_get_sync before.
This patch add pm_runtime_xx with ovl and rdma device whose nodes has
"iommus" property, then display could help pm_runtime_get for smi via
ovl or rdma device.

CC: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
(Yong: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync)
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c  |  8 +++++++-
 drivers/gpu/drm/mediatek/mtk_disp_rdma.c |  9 ++++++++-
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c  | 13 ++++++++++++-
 3 files changed, 27 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
index 5326989d5206..716eac6831f2 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
@@ -11,6 +11,7 @@
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/soc/mediatek/mtk-cmdq.h>
 
 #include "mtk_disp_drv.h"
@@ -414,9 +415,13 @@ static int mtk_disp_ovl_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	pm_runtime_enable(dev);
+
 	ret = component_add(dev, &mtk_disp_ovl_component_ops);
-	if (ret)
+	if (ret) {
+		pm_runtime_disable(dev);
 		dev_err(dev, "Failed to add component: %d\n", ret);
+	}
 
 	return ret;
 }
@@ -424,6 +429,7 @@ static int mtk_disp_ovl_probe(struct platform_device *pdev)
 static int mtk_disp_ovl_remove(struct platform_device *pdev)
 {
 	component_del(&pdev->dev, &mtk_disp_ovl_component_ops);
+	pm_runtime_disable(&pdev->dev);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
index 75d7f45579e2..251f034acb09 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
@@ -9,6 +9,7 @@
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/soc/mediatek/mtk-cmdq.h>
 
 #include "mtk_disp_drv.h"
@@ -327,9 +328,13 @@ static int mtk_disp_rdma_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, priv);
 
+	pm_runtime_enable(dev);
+
 	ret = component_add(dev, &mtk_disp_rdma_component_ops);
-	if (ret)
+	if (ret) {
+		pm_runtime_disable(dev);
 		dev_err(dev, "Failed to add component: %d\n", ret);
+	}
 
 	return ret;
 }
@@ -338,6 +343,8 @@ static int mtk_disp_rdma_remove(struct platform_device *pdev)
 {
 	component_del(&pdev->dev, &mtk_disp_rdma_component_ops);
 
+	pm_runtime_disable(&pdev->dev);
+
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 5f81489fc60c..455ea23c6130 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -649,9 +649,17 @@ static void mtk_drm_crtc_atomic_enable(struct drm_crtc *crtc,
 		return;
 	}
 
+	ret = pm_runtime_resume_and_get(comp->dev);
+	if (ret < 0) {
+		mtk_smi_larb_put(comp->larb_dev);
+		DRM_DEV_ERROR(comp->dev, "Failed to enable power domain: %d\n", ret);
+		return;
+	}
+
 	ret = mtk_crtc_ddp_hw_init(mtk_crtc);
 	if (ret) {
 		mtk_smi_larb_put(comp->larb_dev);
+		pm_runtime_put(comp->dev);
 		return;
 	}
 
@@ -664,7 +672,7 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
 {
 	struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
 	struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[0];
-	int i;
+	int i, ret;
 
 	DRM_DEBUG_DRIVER("%s %d\n", __func__, crtc->base.id);
 	if (!mtk_crtc->enabled)
@@ -688,6 +696,9 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
 	drm_crtc_vblank_off(crtc);
 	mtk_crtc_ddp_hw_fini(mtk_crtc);
 	mtk_smi_larb_put(comp->larb_dev);
+	ret = pm_runtime_put(comp->dev);
+	if (ret < 0)
+		DRM_DEV_ERROR(comp->dev, "Failed to disable power domain: %d\n", ret);
 
 	mtk_crtc->enabled = false;
 }
-- 
2.18.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 07/12] drm/mediatek: Add pm runtime support for ovl and rdma
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich, Yongqiang Niu, CK Hu

From: Yongqiang Niu <yongqiang.niu@mediatek.com>

Prepare for smi cleaning up "mediatek,larb".

Display use the dispsys device to call pm_rumtime_get_sync before.
This patch add pm_runtime_xx with ovl and rdma device whose nodes has
"iommus" property, then display could help pm_runtime_get for smi via
ovl or rdma device.

CC: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
(Yong: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync)
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c  |  8 +++++++-
 drivers/gpu/drm/mediatek/mtk_disp_rdma.c |  9 ++++++++-
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c  | 13 ++++++++++++-
 3 files changed, 27 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
index 5326989d5206..716eac6831f2 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
@@ -11,6 +11,7 @@
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/soc/mediatek/mtk-cmdq.h>
 
 #include "mtk_disp_drv.h"
@@ -414,9 +415,13 @@ static int mtk_disp_ovl_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	pm_runtime_enable(dev);
+
 	ret = component_add(dev, &mtk_disp_ovl_component_ops);
-	if (ret)
+	if (ret) {
+		pm_runtime_disable(dev);
 		dev_err(dev, "Failed to add component: %d\n", ret);
+	}
 
 	return ret;
 }
@@ -424,6 +429,7 @@ static int mtk_disp_ovl_probe(struct platform_device *pdev)
 static int mtk_disp_ovl_remove(struct platform_device *pdev)
 {
 	component_del(&pdev->dev, &mtk_disp_ovl_component_ops);
+	pm_runtime_disable(&pdev->dev);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
index 75d7f45579e2..251f034acb09 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
@@ -9,6 +9,7 @@
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/soc/mediatek/mtk-cmdq.h>
 
 #include "mtk_disp_drv.h"
@@ -327,9 +328,13 @@ static int mtk_disp_rdma_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, priv);
 
+	pm_runtime_enable(dev);
+
 	ret = component_add(dev, &mtk_disp_rdma_component_ops);
-	if (ret)
+	if (ret) {
+		pm_runtime_disable(dev);
 		dev_err(dev, "Failed to add component: %d\n", ret);
+	}
 
 	return ret;
 }
@@ -338,6 +343,8 @@ static int mtk_disp_rdma_remove(struct platform_device *pdev)
 {
 	component_del(&pdev->dev, &mtk_disp_rdma_component_ops);
 
+	pm_runtime_disable(&pdev->dev);
+
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 5f81489fc60c..455ea23c6130 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -649,9 +649,17 @@ static void mtk_drm_crtc_atomic_enable(struct drm_crtc *crtc,
 		return;
 	}
 
+	ret = pm_runtime_resume_and_get(comp->dev);
+	if (ret < 0) {
+		mtk_smi_larb_put(comp->larb_dev);
+		DRM_DEV_ERROR(comp->dev, "Failed to enable power domain: %d\n", ret);
+		return;
+	}
+
 	ret = mtk_crtc_ddp_hw_init(mtk_crtc);
 	if (ret) {
 		mtk_smi_larb_put(comp->larb_dev);
+		pm_runtime_put(comp->dev);
 		return;
 	}
 
@@ -664,7 +672,7 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
 {
 	struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
 	struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[0];
-	int i;
+	int i, ret;
 
 	DRM_DEBUG_DRIVER("%s %d\n", __func__, crtc->base.id);
 	if (!mtk_crtc->enabled)
@@ -688,6 +696,9 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
 	drm_crtc_vblank_off(crtc);
 	mtk_crtc_ddp_hw_fini(mtk_crtc);
 	mtk_smi_larb_put(comp->larb_dev);
+	ret = pm_runtime_put(comp->dev);
+	if (ret < 0)
+		DRM_DEV_ERROR(comp->dev, "Failed to disable power domain: %d\n", ret);
 
 	mtk_crtc->enabled = false;
 }
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 08/12] drm/mediatek: Get rid of mtk_smi_larb_get/put
  2021-09-29  1:37 ` Yong Wu
                     ` (2 preceding siblings ...)
  (?)
@ 2021-09-29  1:37   ` Yong Wu
  -1 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich, CK Hu

MediaTek IOMMU has already added the device_link between the consumer
and smi-larb device. If the drm device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.

CC: CK Hu <ck.hu@mediatek.com>
CC: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c     | 10 ------
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 36 ++-------------------
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h |  1 -
 drivers/gpu/drm/mediatek/mtk_drm_drv.c      |  5 +--
 4 files changed, 3 insertions(+), 49 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 455ea23c6130..445c30cc823f 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -12,7 +12,6 @@
 #include <linux/soc/mediatek/mtk-mutex.h>
 
 #include <asm/barrier.h>
-#include <soc/mediatek/smi.h>
 
 #include <drm/drm_atomic.h>
 #include <drm/drm_atomic_helper.h>
@@ -643,22 +642,14 @@ static void mtk_drm_crtc_atomic_enable(struct drm_crtc *crtc,
 
 	DRM_DEBUG_DRIVER("%s %d\n", __func__, crtc->base.id);
 
-	ret = mtk_smi_larb_get(comp->larb_dev);
-	if (ret) {
-		DRM_ERROR("Failed to get larb: %d\n", ret);
-		return;
-	}
-
 	ret = pm_runtime_resume_and_get(comp->dev);
 	if (ret < 0) {
-		mtk_smi_larb_put(comp->larb_dev);
 		DRM_DEV_ERROR(comp->dev, "Failed to enable power domain: %d\n", ret);
 		return;
 	}
 
 	ret = mtk_crtc_ddp_hw_init(mtk_crtc);
 	if (ret) {
-		mtk_smi_larb_put(comp->larb_dev);
 		pm_runtime_put(comp->dev);
 		return;
 	}
@@ -695,7 +686,6 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
 
 	drm_crtc_vblank_off(crtc);
 	mtk_crtc_ddp_hw_fini(mtk_crtc);
-	mtk_smi_larb_put(comp->larb_dev);
 	ret = pm_runtime_put(comp->dev);
 	if (ret < 0)
 		DRM_DEV_ERROR(comp->dev, "Failed to disable power domain: %d\n", ret);
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index 99cbf44463e4..48642e814370 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -414,37 +414,15 @@ unsigned int mtk_drm_find_possible_crtc_by_comp(struct drm_device *drm,
 	return ret;
 }
 
-static int mtk_ddp_get_larb_dev(struct device_node *node, struct mtk_ddp_comp *comp,
-				struct device *dev)
-{
-	struct device_node *larb_node;
-	struct platform_device *larb_pdev;
-
-	larb_node = of_parse_phandle(node, "mediatek,larb", 0);
-	if (!larb_node) {
-		dev_err(dev, "Missing mediadek,larb phandle in %pOF node\n", node);
-		return -EINVAL;
-	}
-
-	larb_pdev = of_find_device_by_node(larb_node);
-	if (!larb_pdev) {
-		dev_warn(dev, "Waiting for larb device %pOF\n", larb_node);
-		of_node_put(larb_node);
-		return -EPROBE_DEFER;
-	}
-	of_node_put(larb_node);
-	comp->larb_dev = &larb_pdev->dev;
-
-	return 0;
-}
-
 int mtk_ddp_comp_init(struct device_node *node, struct mtk_ddp_comp *comp,
 		      enum mtk_ddp_comp_id comp_id)
 {
 	struct platform_device *comp_pdev;
 	enum mtk_ddp_comp_type type;
 	struct mtk_ddp_comp_dev *priv;
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
 	int ret;
+#endif
 
 	if (comp_id < 0 || comp_id >= DDP_COMPONENT_ID_MAX)
 		return -EINVAL;
@@ -460,16 +438,6 @@ int mtk_ddp_comp_init(struct device_node *node, struct mtk_ddp_comp *comp,
 	}
 	comp->dev = &comp_pdev->dev;
 
-	/* Only DMA capable components need the LARB property */
-	if (type == MTK_DISP_OVL ||
-	    type == MTK_DISP_OVL_2L ||
-	    type == MTK_DISP_RDMA ||
-	    type == MTK_DISP_WDMA) {
-		ret = mtk_ddp_get_larb_dev(node, comp, comp->dev);
-		if (ret)
-			return ret;
-	}
-
 	if (type == MTK_DISP_AAL ||
 	    type == MTK_DISP_BLS ||
 	    type == MTK_DISP_CCORR ||
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
index bb914d976cf5..1b582262b682 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
@@ -70,7 +70,6 @@ struct mtk_ddp_comp_funcs {
 struct mtk_ddp_comp {
 	struct device *dev;
 	int irq;
-	struct device *larb_dev;
 	enum mtk_ddp_comp_id id;
 	const struct mtk_ddp_comp_funcs *funcs;
 };
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index aec39724ebeb..c234293fc2c3 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -603,11 +603,8 @@ static int mtk_drm_probe(struct platform_device *pdev)
 	pm_runtime_disable(dev);
 err_node:
 	of_node_put(private->mutex_node);
-	for (i = 0; i < DDP_COMPONENT_ID_MAX; i++) {
+	for (i = 0; i < DDP_COMPONENT_ID_MAX; i++)
 		of_node_put(private->comp_node[i]);
-		if (private->ddp_comp[i].larb_dev)
-			put_device(private->ddp_comp[i].larb_dev);
-	}
 	return ret;
 }
 
-- 
2.18.0


^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 08/12] drm/mediatek: Get rid of mtk_smi_larb_get/put
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Dafna Hirschfeld, Chun-Kuang Hu, Will Deacon, dri-devel,
	anthony.huang, youlin.pei, Evan Green, Eizan Miyamoto,
	Matthias Kaehlcke, linux-arm-kernel, CK Hu, linux-media,
	devicetree, Philipp Zabel, Frank Wunderlich, yi.kuo,
	linux-mediatek, Hsin-Yi Wang, Tiffany Lin, anan.sun,
	srv_heupstream, acourbot, linux-kernel, iommu, Daniel Vetter,
	Robin Murphy

MediaTek IOMMU has already added the device_link between the consumer
and smi-larb device. If the drm device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.

CC: CK Hu <ck.hu@mediatek.com>
CC: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c     | 10 ------
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 36 ++-------------------
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h |  1 -
 drivers/gpu/drm/mediatek/mtk_drm_drv.c      |  5 +--
 4 files changed, 3 insertions(+), 49 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 455ea23c6130..445c30cc823f 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -12,7 +12,6 @@
 #include <linux/soc/mediatek/mtk-mutex.h>
 
 #include <asm/barrier.h>
-#include <soc/mediatek/smi.h>
 
 #include <drm/drm_atomic.h>
 #include <drm/drm_atomic_helper.h>
@@ -643,22 +642,14 @@ static void mtk_drm_crtc_atomic_enable(struct drm_crtc *crtc,
 
 	DRM_DEBUG_DRIVER("%s %d\n", __func__, crtc->base.id);
 
-	ret = mtk_smi_larb_get(comp->larb_dev);
-	if (ret) {
-		DRM_ERROR("Failed to get larb: %d\n", ret);
-		return;
-	}
-
 	ret = pm_runtime_resume_and_get(comp->dev);
 	if (ret < 0) {
-		mtk_smi_larb_put(comp->larb_dev);
 		DRM_DEV_ERROR(comp->dev, "Failed to enable power domain: %d\n", ret);
 		return;
 	}
 
 	ret = mtk_crtc_ddp_hw_init(mtk_crtc);
 	if (ret) {
-		mtk_smi_larb_put(comp->larb_dev);
 		pm_runtime_put(comp->dev);
 		return;
 	}
@@ -695,7 +686,6 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
 
 	drm_crtc_vblank_off(crtc);
 	mtk_crtc_ddp_hw_fini(mtk_crtc);
-	mtk_smi_larb_put(comp->larb_dev);
 	ret = pm_runtime_put(comp->dev);
 	if (ret < 0)
 		DRM_DEV_ERROR(comp->dev, "Failed to disable power domain: %d\n", ret);
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index 99cbf44463e4..48642e814370 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -414,37 +414,15 @@ unsigned int mtk_drm_find_possible_crtc_by_comp(struct drm_device *drm,
 	return ret;
 }
 
-static int mtk_ddp_get_larb_dev(struct device_node *node, struct mtk_ddp_comp *comp,
-				struct device *dev)
-{
-	struct device_node *larb_node;
-	struct platform_device *larb_pdev;
-
-	larb_node = of_parse_phandle(node, "mediatek,larb", 0);
-	if (!larb_node) {
-		dev_err(dev, "Missing mediadek,larb phandle in %pOF node\n", node);
-		return -EINVAL;
-	}
-
-	larb_pdev = of_find_device_by_node(larb_node);
-	if (!larb_pdev) {
-		dev_warn(dev, "Waiting for larb device %pOF\n", larb_node);
-		of_node_put(larb_node);
-		return -EPROBE_DEFER;
-	}
-	of_node_put(larb_node);
-	comp->larb_dev = &larb_pdev->dev;
-
-	return 0;
-}
-
 int mtk_ddp_comp_init(struct device_node *node, struct mtk_ddp_comp *comp,
 		      enum mtk_ddp_comp_id comp_id)
 {
 	struct platform_device *comp_pdev;
 	enum mtk_ddp_comp_type type;
 	struct mtk_ddp_comp_dev *priv;
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
 	int ret;
+#endif
 
 	if (comp_id < 0 || comp_id >= DDP_COMPONENT_ID_MAX)
 		return -EINVAL;
@@ -460,16 +438,6 @@ int mtk_ddp_comp_init(struct device_node *node, struct mtk_ddp_comp *comp,
 	}
 	comp->dev = &comp_pdev->dev;
 
-	/* Only DMA capable components need the LARB property */
-	if (type == MTK_DISP_OVL ||
-	    type == MTK_DISP_OVL_2L ||
-	    type == MTK_DISP_RDMA ||
-	    type == MTK_DISP_WDMA) {
-		ret = mtk_ddp_get_larb_dev(node, comp, comp->dev);
-		if (ret)
-			return ret;
-	}
-
 	if (type == MTK_DISP_AAL ||
 	    type == MTK_DISP_BLS ||
 	    type == MTK_DISP_CCORR ||
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
index bb914d976cf5..1b582262b682 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
@@ -70,7 +70,6 @@ struct mtk_ddp_comp_funcs {
 struct mtk_ddp_comp {
 	struct device *dev;
 	int irq;
-	struct device *larb_dev;
 	enum mtk_ddp_comp_id id;
 	const struct mtk_ddp_comp_funcs *funcs;
 };
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index aec39724ebeb..c234293fc2c3 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -603,11 +603,8 @@ static int mtk_drm_probe(struct platform_device *pdev)
 	pm_runtime_disable(dev);
 err_node:
 	of_node_put(private->mutex_node);
-	for (i = 0; i < DDP_COMPONENT_ID_MAX; i++) {
+	for (i = 0; i < DDP_COMPONENT_ID_MAX; i++)
 		of_node_put(private->comp_node[i]);
-		if (private->ddp_comp[i].larb_dev)
-			put_device(private->ddp_comp[i].larb_dev);
-	}
 	return ret;
 }
 
-- 
2.18.0

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 08/12] drm/mediatek: Get rid of mtk_smi_larb_get/put
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich, CK Hu

MediaTek IOMMU has already added the device_link between the consumer
and smi-larb device. If the drm device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.

CC: CK Hu <ck.hu@mediatek.com>
CC: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c     | 10 ------
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 36 ++-------------------
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h |  1 -
 drivers/gpu/drm/mediatek/mtk_drm_drv.c      |  5 +--
 4 files changed, 3 insertions(+), 49 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 455ea23c6130..445c30cc823f 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -12,7 +12,6 @@
 #include <linux/soc/mediatek/mtk-mutex.h>
 
 #include <asm/barrier.h>
-#include <soc/mediatek/smi.h>
 
 #include <drm/drm_atomic.h>
 #include <drm/drm_atomic_helper.h>
@@ -643,22 +642,14 @@ static void mtk_drm_crtc_atomic_enable(struct drm_crtc *crtc,
 
 	DRM_DEBUG_DRIVER("%s %d\n", __func__, crtc->base.id);
 
-	ret = mtk_smi_larb_get(comp->larb_dev);
-	if (ret) {
-		DRM_ERROR("Failed to get larb: %d\n", ret);
-		return;
-	}
-
 	ret = pm_runtime_resume_and_get(comp->dev);
 	if (ret < 0) {
-		mtk_smi_larb_put(comp->larb_dev);
 		DRM_DEV_ERROR(comp->dev, "Failed to enable power domain: %d\n", ret);
 		return;
 	}
 
 	ret = mtk_crtc_ddp_hw_init(mtk_crtc);
 	if (ret) {
-		mtk_smi_larb_put(comp->larb_dev);
 		pm_runtime_put(comp->dev);
 		return;
 	}
@@ -695,7 +686,6 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
 
 	drm_crtc_vblank_off(crtc);
 	mtk_crtc_ddp_hw_fini(mtk_crtc);
-	mtk_smi_larb_put(comp->larb_dev);
 	ret = pm_runtime_put(comp->dev);
 	if (ret < 0)
 		DRM_DEV_ERROR(comp->dev, "Failed to disable power domain: %d\n", ret);
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index 99cbf44463e4..48642e814370 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -414,37 +414,15 @@ unsigned int mtk_drm_find_possible_crtc_by_comp(struct drm_device *drm,
 	return ret;
 }
 
-static int mtk_ddp_get_larb_dev(struct device_node *node, struct mtk_ddp_comp *comp,
-				struct device *dev)
-{
-	struct device_node *larb_node;
-	struct platform_device *larb_pdev;
-
-	larb_node = of_parse_phandle(node, "mediatek,larb", 0);
-	if (!larb_node) {
-		dev_err(dev, "Missing mediadek,larb phandle in %pOF node\n", node);
-		return -EINVAL;
-	}
-
-	larb_pdev = of_find_device_by_node(larb_node);
-	if (!larb_pdev) {
-		dev_warn(dev, "Waiting for larb device %pOF\n", larb_node);
-		of_node_put(larb_node);
-		return -EPROBE_DEFER;
-	}
-	of_node_put(larb_node);
-	comp->larb_dev = &larb_pdev->dev;
-
-	return 0;
-}
-
 int mtk_ddp_comp_init(struct device_node *node, struct mtk_ddp_comp *comp,
 		      enum mtk_ddp_comp_id comp_id)
 {
 	struct platform_device *comp_pdev;
 	enum mtk_ddp_comp_type type;
 	struct mtk_ddp_comp_dev *priv;
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
 	int ret;
+#endif
 
 	if (comp_id < 0 || comp_id >= DDP_COMPONENT_ID_MAX)
 		return -EINVAL;
@@ -460,16 +438,6 @@ int mtk_ddp_comp_init(struct device_node *node, struct mtk_ddp_comp *comp,
 	}
 	comp->dev = &comp_pdev->dev;
 
-	/* Only DMA capable components need the LARB property */
-	if (type == MTK_DISP_OVL ||
-	    type == MTK_DISP_OVL_2L ||
-	    type == MTK_DISP_RDMA ||
-	    type == MTK_DISP_WDMA) {
-		ret = mtk_ddp_get_larb_dev(node, comp, comp->dev);
-		if (ret)
-			return ret;
-	}
-
 	if (type == MTK_DISP_AAL ||
 	    type == MTK_DISP_BLS ||
 	    type == MTK_DISP_CCORR ||
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
index bb914d976cf5..1b582262b682 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
@@ -70,7 +70,6 @@ struct mtk_ddp_comp_funcs {
 struct mtk_ddp_comp {
 	struct device *dev;
 	int irq;
-	struct device *larb_dev;
 	enum mtk_ddp_comp_id id;
 	const struct mtk_ddp_comp_funcs *funcs;
 };
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index aec39724ebeb..c234293fc2c3 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -603,11 +603,8 @@ static int mtk_drm_probe(struct platform_device *pdev)
 	pm_runtime_disable(dev);
 err_node:
 	of_node_put(private->mutex_node);
-	for (i = 0; i < DDP_COMPONENT_ID_MAX; i++) {
+	for (i = 0; i < DDP_COMPONENT_ID_MAX; i++)
 		of_node_put(private->comp_node[i]);
-		if (private->ddp_comp[i].larb_dev)
-			put_device(private->ddp_comp[i].larb_dev);
-	}
 	return ret;
 }
 
-- 
2.18.0


^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 08/12] drm/mediatek: Get rid of mtk_smi_larb_get/put
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich, CK Hu

MediaTek IOMMU has already added the device_link between the consumer
and smi-larb device. If the drm device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.

CC: CK Hu <ck.hu@mediatek.com>
CC: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c     | 10 ------
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 36 ++-------------------
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h |  1 -
 drivers/gpu/drm/mediatek/mtk_drm_drv.c      |  5 +--
 4 files changed, 3 insertions(+), 49 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 455ea23c6130..445c30cc823f 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -12,7 +12,6 @@
 #include <linux/soc/mediatek/mtk-mutex.h>
 
 #include <asm/barrier.h>
-#include <soc/mediatek/smi.h>
 
 #include <drm/drm_atomic.h>
 #include <drm/drm_atomic_helper.h>
@@ -643,22 +642,14 @@ static void mtk_drm_crtc_atomic_enable(struct drm_crtc *crtc,
 
 	DRM_DEBUG_DRIVER("%s %d\n", __func__, crtc->base.id);
 
-	ret = mtk_smi_larb_get(comp->larb_dev);
-	if (ret) {
-		DRM_ERROR("Failed to get larb: %d\n", ret);
-		return;
-	}
-
 	ret = pm_runtime_resume_and_get(comp->dev);
 	if (ret < 0) {
-		mtk_smi_larb_put(comp->larb_dev);
 		DRM_DEV_ERROR(comp->dev, "Failed to enable power domain: %d\n", ret);
 		return;
 	}
 
 	ret = mtk_crtc_ddp_hw_init(mtk_crtc);
 	if (ret) {
-		mtk_smi_larb_put(comp->larb_dev);
 		pm_runtime_put(comp->dev);
 		return;
 	}
@@ -695,7 +686,6 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
 
 	drm_crtc_vblank_off(crtc);
 	mtk_crtc_ddp_hw_fini(mtk_crtc);
-	mtk_smi_larb_put(comp->larb_dev);
 	ret = pm_runtime_put(comp->dev);
 	if (ret < 0)
 		DRM_DEV_ERROR(comp->dev, "Failed to disable power domain: %d\n", ret);
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index 99cbf44463e4..48642e814370 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -414,37 +414,15 @@ unsigned int mtk_drm_find_possible_crtc_by_comp(struct drm_device *drm,
 	return ret;
 }
 
-static int mtk_ddp_get_larb_dev(struct device_node *node, struct mtk_ddp_comp *comp,
-				struct device *dev)
-{
-	struct device_node *larb_node;
-	struct platform_device *larb_pdev;
-
-	larb_node = of_parse_phandle(node, "mediatek,larb", 0);
-	if (!larb_node) {
-		dev_err(dev, "Missing mediadek,larb phandle in %pOF node\n", node);
-		return -EINVAL;
-	}
-
-	larb_pdev = of_find_device_by_node(larb_node);
-	if (!larb_pdev) {
-		dev_warn(dev, "Waiting for larb device %pOF\n", larb_node);
-		of_node_put(larb_node);
-		return -EPROBE_DEFER;
-	}
-	of_node_put(larb_node);
-	comp->larb_dev = &larb_pdev->dev;
-
-	return 0;
-}
-
 int mtk_ddp_comp_init(struct device_node *node, struct mtk_ddp_comp *comp,
 		      enum mtk_ddp_comp_id comp_id)
 {
 	struct platform_device *comp_pdev;
 	enum mtk_ddp_comp_type type;
 	struct mtk_ddp_comp_dev *priv;
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
 	int ret;
+#endif
 
 	if (comp_id < 0 || comp_id >= DDP_COMPONENT_ID_MAX)
 		return -EINVAL;
@@ -460,16 +438,6 @@ int mtk_ddp_comp_init(struct device_node *node, struct mtk_ddp_comp *comp,
 	}
 	comp->dev = &comp_pdev->dev;
 
-	/* Only DMA capable components need the LARB property */
-	if (type == MTK_DISP_OVL ||
-	    type == MTK_DISP_OVL_2L ||
-	    type == MTK_DISP_RDMA ||
-	    type == MTK_DISP_WDMA) {
-		ret = mtk_ddp_get_larb_dev(node, comp, comp->dev);
-		if (ret)
-			return ret;
-	}
-
 	if (type == MTK_DISP_AAL ||
 	    type == MTK_DISP_BLS ||
 	    type == MTK_DISP_CCORR ||
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
index bb914d976cf5..1b582262b682 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
@@ -70,7 +70,6 @@ struct mtk_ddp_comp_funcs {
 struct mtk_ddp_comp {
 	struct device *dev;
 	int irq;
-	struct device *larb_dev;
 	enum mtk_ddp_comp_id id;
 	const struct mtk_ddp_comp_funcs *funcs;
 };
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index aec39724ebeb..c234293fc2c3 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -603,11 +603,8 @@ static int mtk_drm_probe(struct platform_device *pdev)
 	pm_runtime_disable(dev);
 err_node:
 	of_node_put(private->mutex_node);
-	for (i = 0; i < DDP_COMPONENT_ID_MAX; i++) {
+	for (i = 0; i < DDP_COMPONENT_ID_MAX; i++)
 		of_node_put(private->comp_node[i]);
-		if (private->ddp_comp[i].larb_dev)
-			put_device(private->ddp_comp[i].larb_dev);
-	}
 	return ret;
 }
 
-- 
2.18.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 08/12] drm/mediatek: Get rid of mtk_smi_larb_get/put
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich, CK Hu

MediaTek IOMMU has already added the device_link between the consumer
and smi-larb device. If the drm device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.

CC: CK Hu <ck.hu@mediatek.com>
CC: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c     | 10 ------
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 36 ++-------------------
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h |  1 -
 drivers/gpu/drm/mediatek/mtk_drm_drv.c      |  5 +--
 4 files changed, 3 insertions(+), 49 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 455ea23c6130..445c30cc823f 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -12,7 +12,6 @@
 #include <linux/soc/mediatek/mtk-mutex.h>
 
 #include <asm/barrier.h>
-#include <soc/mediatek/smi.h>
 
 #include <drm/drm_atomic.h>
 #include <drm/drm_atomic_helper.h>
@@ -643,22 +642,14 @@ static void mtk_drm_crtc_atomic_enable(struct drm_crtc *crtc,
 
 	DRM_DEBUG_DRIVER("%s %d\n", __func__, crtc->base.id);
 
-	ret = mtk_smi_larb_get(comp->larb_dev);
-	if (ret) {
-		DRM_ERROR("Failed to get larb: %d\n", ret);
-		return;
-	}
-
 	ret = pm_runtime_resume_and_get(comp->dev);
 	if (ret < 0) {
-		mtk_smi_larb_put(comp->larb_dev);
 		DRM_DEV_ERROR(comp->dev, "Failed to enable power domain: %d\n", ret);
 		return;
 	}
 
 	ret = mtk_crtc_ddp_hw_init(mtk_crtc);
 	if (ret) {
-		mtk_smi_larb_put(comp->larb_dev);
 		pm_runtime_put(comp->dev);
 		return;
 	}
@@ -695,7 +686,6 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
 
 	drm_crtc_vblank_off(crtc);
 	mtk_crtc_ddp_hw_fini(mtk_crtc);
-	mtk_smi_larb_put(comp->larb_dev);
 	ret = pm_runtime_put(comp->dev);
 	if (ret < 0)
 		DRM_DEV_ERROR(comp->dev, "Failed to disable power domain: %d\n", ret);
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index 99cbf44463e4..48642e814370 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -414,37 +414,15 @@ unsigned int mtk_drm_find_possible_crtc_by_comp(struct drm_device *drm,
 	return ret;
 }
 
-static int mtk_ddp_get_larb_dev(struct device_node *node, struct mtk_ddp_comp *comp,
-				struct device *dev)
-{
-	struct device_node *larb_node;
-	struct platform_device *larb_pdev;
-
-	larb_node = of_parse_phandle(node, "mediatek,larb", 0);
-	if (!larb_node) {
-		dev_err(dev, "Missing mediadek,larb phandle in %pOF node\n", node);
-		return -EINVAL;
-	}
-
-	larb_pdev = of_find_device_by_node(larb_node);
-	if (!larb_pdev) {
-		dev_warn(dev, "Waiting for larb device %pOF\n", larb_node);
-		of_node_put(larb_node);
-		return -EPROBE_DEFER;
-	}
-	of_node_put(larb_node);
-	comp->larb_dev = &larb_pdev->dev;
-
-	return 0;
-}
-
 int mtk_ddp_comp_init(struct device_node *node, struct mtk_ddp_comp *comp,
 		      enum mtk_ddp_comp_id comp_id)
 {
 	struct platform_device *comp_pdev;
 	enum mtk_ddp_comp_type type;
 	struct mtk_ddp_comp_dev *priv;
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
 	int ret;
+#endif
 
 	if (comp_id < 0 || comp_id >= DDP_COMPONENT_ID_MAX)
 		return -EINVAL;
@@ -460,16 +438,6 @@ int mtk_ddp_comp_init(struct device_node *node, struct mtk_ddp_comp *comp,
 	}
 	comp->dev = &comp_pdev->dev;
 
-	/* Only DMA capable components need the LARB property */
-	if (type == MTK_DISP_OVL ||
-	    type == MTK_DISP_OVL_2L ||
-	    type == MTK_DISP_RDMA ||
-	    type == MTK_DISP_WDMA) {
-		ret = mtk_ddp_get_larb_dev(node, comp, comp->dev);
-		if (ret)
-			return ret;
-	}
-
 	if (type == MTK_DISP_AAL ||
 	    type == MTK_DISP_BLS ||
 	    type == MTK_DISP_CCORR ||
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
index bb914d976cf5..1b582262b682 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
@@ -70,7 +70,6 @@ struct mtk_ddp_comp_funcs {
 struct mtk_ddp_comp {
 	struct device *dev;
 	int irq;
-	struct device *larb_dev;
 	enum mtk_ddp_comp_id id;
 	const struct mtk_ddp_comp_funcs *funcs;
 };
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index aec39724ebeb..c234293fc2c3 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -603,11 +603,8 @@ static int mtk_drm_probe(struct platform_device *pdev)
 	pm_runtime_disable(dev);
 err_node:
 	of_node_put(private->mutex_node);
-	for (i = 0; i < DDP_COMPONENT_ID_MAX; i++) {
+	for (i = 0; i < DDP_COMPONENT_ID_MAX; i++)
 		of_node_put(private->comp_node[i]);
-		if (private->ddp_comp[i].larb_dev)
-			put_device(private->ddp_comp[i].larb_dev);
-	}
 	return ret;
 }
 
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 09/12] media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
  2021-09-29  1:37 ` Yong Wu
                     ` (2 preceding siblings ...)
  (?)
@ 2021-09-29  1:37   ` Yong Wu
  -1 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich, Irui Wang

MediaTek IOMMU has already added the device_link between the consumer
and smi-larb device. If the vcodec device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.

CC: Tiffany Lin <tiffany.lin@mediatek.com>
CC: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: Tiffany Lin <tiffany.lin@mediatek.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
---
 .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c   | 37 +++-------------
 .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  3 --
 .../platform/mtk-vcodec/mtk_vcodec_enc.c      |  1 -
 .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c   | 44 +++----------------
 4 files changed, 10 insertions(+), 75 deletions(-)

diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
index 6038db96f71c..d0bf9aa3b29d 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
@@ -8,14 +8,12 @@
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/pm_runtime.h>
-#include <soc/mediatek/smi.h>
 
 #include "mtk_vcodec_dec_pm.h"
 #include "mtk_vcodec_util.h"
 
 int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
 {
-	struct device_node *node;
 	struct platform_device *pdev;
 	struct mtk_vcodec_pm *pm;
 	struct mtk_vcodec_clk *dec_clk;
@@ -26,18 +24,7 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
 	pm = &mtkdev->pm;
 	pm->mtkdev = mtkdev;
 	dec_clk = &pm->vdec_clk;
-	node = of_parse_phandle(pdev->dev.of_node, "mediatek,larb", 0);
-	if (!node) {
-		mtk_v4l2_err("of_parse_phandle mediatek,larb fail!");
-		return -1;
-	}
 
-	pdev = of_find_device_by_node(node);
-	of_node_put(node);
-	if (WARN_ON(!pdev)) {
-		return -1;
-	}
-	pm->larbvdec = &pdev->dev;
 	pdev = mtkdev->plat_dev;
 	pm->dev = &pdev->dev;
 
@@ -47,14 +34,11 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
 		dec_clk->clk_info = devm_kcalloc(&pdev->dev,
 			dec_clk->clk_num, sizeof(*clk_info),
 			GFP_KERNEL);
-		if (!dec_clk->clk_info) {
-			ret = -ENOMEM;
-			goto put_device;
-		}
+		if (!dec_clk->clk_info)
+			return -ENOMEM;
 	} else {
 		mtk_v4l2_err("Failed to get vdec clock count");
-		ret = -EINVAL;
-		goto put_device;
+		return -EINVAL;
 	}
 
 	for (i = 0; i < dec_clk->clk_num; i++) {
@@ -63,29 +47,24 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
 			"clock-names", i, &clk_info->clk_name);
 		if (ret) {
 			mtk_v4l2_err("Failed to get clock name id = %d", i);
-			goto put_device;
+			return ret;
 		}
 		clk_info->vcodec_clk = devm_clk_get(&pdev->dev,
 			clk_info->clk_name);
 		if (IS_ERR(clk_info->vcodec_clk)) {
 			mtk_v4l2_err("devm_clk_get (%d)%s fail", i,
 				clk_info->clk_name);
-			ret = PTR_ERR(clk_info->vcodec_clk);
-			goto put_device;
+			return PTR_ERR(clk_info->vcodec_clk);
 		}
 	}
 
 	pm_runtime_enable(&pdev->dev);
 	return 0;
-put_device:
-	put_device(pm->larbvdec);
-	return ret;
 }
 
 void mtk_vcodec_release_dec_pm(struct mtk_vcodec_dev *dev)
 {
 	pm_runtime_disable(dev->pm.dev);
-	put_device(dev->pm.larbvdec);
 }
 
 int mtk_vcodec_dec_pw_on(struct mtk_vcodec_pm *pm)
@@ -122,11 +101,6 @@ void mtk_vcodec_dec_clock_on(struct mtk_vcodec_pm *pm)
 		}
 	}
 
-	ret = mtk_smi_larb_get(pm->larbvdec);
-	if (ret) {
-		mtk_v4l2_err("mtk_smi_larb_get larbvdec fail %d", ret);
-		goto error;
-	}
 	return;
 
 error:
@@ -139,7 +113,6 @@ void mtk_vcodec_dec_clock_off(struct mtk_vcodec_pm *pm)
 	struct mtk_vcodec_clk *dec_clk = &pm->vdec_clk;
 	int i = 0;
 
-	mtk_smi_larb_put(pm->larbvdec);
 	for (i = dec_clk->clk_num - 1; i >= 0; i--)
 		clk_disable_unprepare(dec_clk->clk_info[i].vcodec_clk);
 }
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
index c6c7672fecfb..64b73dd880ce 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
@@ -189,10 +189,7 @@ struct mtk_vcodec_clk {
  */
 struct mtk_vcodec_pm {
 	struct mtk_vcodec_clk	vdec_clk;
-	struct device	*larbvdec;
-
 	struct mtk_vcodec_clk	venc_clk;
-	struct device	*larbvenc;
 	struct device	*dev;
 	struct mtk_vcodec_dev	*mtkdev;
 };
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
index 416f356af363..9a1515cf862d 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
@@ -8,7 +8,6 @@
 #include <media/v4l2-event.h>
 #include <media/v4l2-mem2mem.h>
 #include <media/videobuf2-dma-contig.h>
-#include <soc/mediatek/smi.h>
 #include <linux/pm_runtime.h>
 
 #include "mtk_vcodec_drv.h"
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
index 1b2e4930ed27..dffb190267ed 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
@@ -8,58 +8,36 @@
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/pm_runtime.h>
-#include <soc/mediatek/smi.h>
 
 #include "mtk_vcodec_enc_pm.h"
 #include "mtk_vcodec_util.h"
 
 int mtk_vcodec_init_enc_pm(struct mtk_vcodec_dev *mtkdev)
 {
-	struct device_node *node;
 	struct platform_device *pdev;
 	struct mtk_vcodec_pm *pm;
 	struct mtk_vcodec_clk *enc_clk;
 	struct mtk_vcodec_clk_info *clk_info;
 	int ret = 0, i = 0;
-	struct device *dev;
 
 	pdev = mtkdev->plat_dev;
 	pm = &mtkdev->pm;
 	memset(pm, 0, sizeof(struct mtk_vcodec_pm));
 	pm->mtkdev = mtkdev;
 	pm->dev = &pdev->dev;
-	dev = &pdev->dev;
 	enc_clk = &pm->venc_clk;
 
-	node = of_parse_phandle(dev->of_node, "mediatek,larb", 0);
-	if (!node) {
-		mtk_v4l2_err("no mediatek,larb found");
-		return -ENODEV;
-	}
-	pdev = of_find_device_by_node(node);
-	of_node_put(node);
-	if (!pdev) {
-		mtk_v4l2_err("no mediatek,larb device found");
-		return -ENODEV;
-	}
-	pm->larbvenc = &pdev->dev;
-	pdev = mtkdev->plat_dev;
-	pm->dev = &pdev->dev;
-
 	enc_clk->clk_num = of_property_count_strings(pdev->dev.of_node,
 		"clock-names");
 	if (enc_clk->clk_num > 0) {
 		enc_clk->clk_info = devm_kcalloc(&pdev->dev,
 			enc_clk->clk_num, sizeof(*clk_info),
 			GFP_KERNEL);
-		if (!enc_clk->clk_info) {
-			ret = -ENOMEM;
-			goto put_larbvenc;
-		}
+		if (!enc_clk->clk_info)
+			return -ENOMEM;
 	} else {
 		mtk_v4l2_err("Failed to get venc clock count");
-		ret = -EINVAL;
-		goto put_larbvenc;
+		return -EINVAL;
 	}
 
 	for (i = 0; i < enc_clk->clk_num; i++) {
@@ -68,29 +46,23 @@ int mtk_vcodec_init_enc_pm(struct mtk_vcodec_dev *mtkdev)
 			"clock-names", i, &clk_info->clk_name);
 		if (ret) {
 			mtk_v4l2_err("venc failed to get clk name %d", i);
-			goto put_larbvenc;
+			return ret;
 		}
 		clk_info->vcodec_clk = devm_clk_get(&pdev->dev,
 			clk_info->clk_name);
 		if (IS_ERR(clk_info->vcodec_clk)) {
 			mtk_v4l2_err("venc devm_clk_get (%d)%s fail", i,
 				clk_info->clk_name);
-			ret = PTR_ERR(clk_info->vcodec_clk);
-			goto put_larbvenc;
+			return PTR_ERR(clk_info->vcodec_clk);
 		}
 	}
 
 	return 0;
-
-put_larbvenc:
-	put_device(pm->larbvenc);
-	return ret;
 }
 
 void mtk_vcodec_release_enc_pm(struct mtk_vcodec_dev *mtkdev)
 {
 	pm_runtime_disable(mtkdev->pm.dev);
-	put_device(mtkdev->pm.larbvenc);
 }
 
 
@@ -108,11 +80,6 @@ void mtk_vcodec_enc_clock_on(struct mtk_vcodec_pm *pm)
 		}
 	}
 
-	ret = mtk_smi_larb_get(pm->larbvenc);
-	if (ret) {
-		mtk_v4l2_err("mtk_smi_larb_get larb3 fail %d", ret);
-		goto clkerr;
-	}
 	return;
 
 clkerr:
@@ -125,7 +92,6 @@ void mtk_vcodec_enc_clock_off(struct mtk_vcodec_pm *pm)
 	struct mtk_vcodec_clk *enc_clk = &pm->venc_clk;
 	int i = 0;
 
-	mtk_smi_larb_put(pm->larbvenc);
 	for (i = enc_clk->clk_num - 1; i >= 0; i--)
 		clk_disable_unprepare(enc_clk->clk_info[i].vcodec_clk);
 }
-- 
2.18.0


^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 09/12] media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich, Irui Wang

MediaTek IOMMU has already added the device_link between the consumer
and smi-larb device. If the vcodec device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.

CC: Tiffany Lin <tiffany.lin@mediatek.com>
CC: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: Tiffany Lin <tiffany.lin@mediatek.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
---
 .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c   | 37 +++-------------
 .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  3 --
 .../platform/mtk-vcodec/mtk_vcodec_enc.c      |  1 -
 .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c   | 44 +++----------------
 4 files changed, 10 insertions(+), 75 deletions(-)

diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
index 6038db96f71c..d0bf9aa3b29d 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
@@ -8,14 +8,12 @@
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/pm_runtime.h>
-#include <soc/mediatek/smi.h>
 
 #include "mtk_vcodec_dec_pm.h"
 #include "mtk_vcodec_util.h"
 
 int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
 {
-	struct device_node *node;
 	struct platform_device *pdev;
 	struct mtk_vcodec_pm *pm;
 	struct mtk_vcodec_clk *dec_clk;
@@ -26,18 +24,7 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
 	pm = &mtkdev->pm;
 	pm->mtkdev = mtkdev;
 	dec_clk = &pm->vdec_clk;
-	node = of_parse_phandle(pdev->dev.of_node, "mediatek,larb", 0);
-	if (!node) {
-		mtk_v4l2_err("of_parse_phandle mediatek,larb fail!");
-		return -1;
-	}
 
-	pdev = of_find_device_by_node(node);
-	of_node_put(node);
-	if (WARN_ON(!pdev)) {
-		return -1;
-	}
-	pm->larbvdec = &pdev->dev;
 	pdev = mtkdev->plat_dev;
 	pm->dev = &pdev->dev;
 
@@ -47,14 +34,11 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
 		dec_clk->clk_info = devm_kcalloc(&pdev->dev,
 			dec_clk->clk_num, sizeof(*clk_info),
 			GFP_KERNEL);
-		if (!dec_clk->clk_info) {
-			ret = -ENOMEM;
-			goto put_device;
-		}
+		if (!dec_clk->clk_info)
+			return -ENOMEM;
 	} else {
 		mtk_v4l2_err("Failed to get vdec clock count");
-		ret = -EINVAL;
-		goto put_device;
+		return -EINVAL;
 	}
 
 	for (i = 0; i < dec_clk->clk_num; i++) {
@@ -63,29 +47,24 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
 			"clock-names", i, &clk_info->clk_name);
 		if (ret) {
 			mtk_v4l2_err("Failed to get clock name id = %d", i);
-			goto put_device;
+			return ret;
 		}
 		clk_info->vcodec_clk = devm_clk_get(&pdev->dev,
 			clk_info->clk_name);
 		if (IS_ERR(clk_info->vcodec_clk)) {
 			mtk_v4l2_err("devm_clk_get (%d)%s fail", i,
 				clk_info->clk_name);
-			ret = PTR_ERR(clk_info->vcodec_clk);
-			goto put_device;
+			return PTR_ERR(clk_info->vcodec_clk);
 		}
 	}
 
 	pm_runtime_enable(&pdev->dev);
 	return 0;
-put_device:
-	put_device(pm->larbvdec);
-	return ret;
 }
 
 void mtk_vcodec_release_dec_pm(struct mtk_vcodec_dev *dev)
 {
 	pm_runtime_disable(dev->pm.dev);
-	put_device(dev->pm.larbvdec);
 }
 
 int mtk_vcodec_dec_pw_on(struct mtk_vcodec_pm *pm)
@@ -122,11 +101,6 @@ void mtk_vcodec_dec_clock_on(struct mtk_vcodec_pm *pm)
 		}
 	}
 
-	ret = mtk_smi_larb_get(pm->larbvdec);
-	if (ret) {
-		mtk_v4l2_err("mtk_smi_larb_get larbvdec fail %d", ret);
-		goto error;
-	}
 	return;
 
 error:
@@ -139,7 +113,6 @@ void mtk_vcodec_dec_clock_off(struct mtk_vcodec_pm *pm)
 	struct mtk_vcodec_clk *dec_clk = &pm->vdec_clk;
 	int i = 0;
 
-	mtk_smi_larb_put(pm->larbvdec);
 	for (i = dec_clk->clk_num - 1; i >= 0; i--)
 		clk_disable_unprepare(dec_clk->clk_info[i].vcodec_clk);
 }
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
index c6c7672fecfb..64b73dd880ce 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
@@ -189,10 +189,7 @@ struct mtk_vcodec_clk {
  */
 struct mtk_vcodec_pm {
 	struct mtk_vcodec_clk	vdec_clk;
-	struct device	*larbvdec;
-
 	struct mtk_vcodec_clk	venc_clk;
-	struct device	*larbvenc;
 	struct device	*dev;
 	struct mtk_vcodec_dev	*mtkdev;
 };
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
index 416f356af363..9a1515cf862d 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
@@ -8,7 +8,6 @@
 #include <media/v4l2-event.h>
 #include <media/v4l2-mem2mem.h>
 #include <media/videobuf2-dma-contig.h>
-#include <soc/mediatek/smi.h>
 #include <linux/pm_runtime.h>
 
 #include "mtk_vcodec_drv.h"
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
index 1b2e4930ed27..dffb190267ed 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
@@ -8,58 +8,36 @@
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/pm_runtime.h>
-#include <soc/mediatek/smi.h>
 
 #include "mtk_vcodec_enc_pm.h"
 #include "mtk_vcodec_util.h"
 
 int mtk_vcodec_init_enc_pm(struct mtk_vcodec_dev *mtkdev)
 {
-	struct device_node *node;
 	struct platform_device *pdev;
 	struct mtk_vcodec_pm *pm;
 	struct mtk_vcodec_clk *enc_clk;
 	struct mtk_vcodec_clk_info *clk_info;
 	int ret = 0, i = 0;
-	struct device *dev;
 
 	pdev = mtkdev->plat_dev;
 	pm = &mtkdev->pm;
 	memset(pm, 0, sizeof(struct mtk_vcodec_pm));
 	pm->mtkdev = mtkdev;
 	pm->dev = &pdev->dev;
-	dev = &pdev->dev;
 	enc_clk = &pm->venc_clk;
 
-	node = of_parse_phandle(dev->of_node, "mediatek,larb", 0);
-	if (!node) {
-		mtk_v4l2_err("no mediatek,larb found");
-		return -ENODEV;
-	}
-	pdev = of_find_device_by_node(node);
-	of_node_put(node);
-	if (!pdev) {
-		mtk_v4l2_err("no mediatek,larb device found");
-		return -ENODEV;
-	}
-	pm->larbvenc = &pdev->dev;
-	pdev = mtkdev->plat_dev;
-	pm->dev = &pdev->dev;
-
 	enc_clk->clk_num = of_property_count_strings(pdev->dev.of_node,
 		"clock-names");
 	if (enc_clk->clk_num > 0) {
 		enc_clk->clk_info = devm_kcalloc(&pdev->dev,
 			enc_clk->clk_num, sizeof(*clk_info),
 			GFP_KERNEL);
-		if (!enc_clk->clk_info) {
-			ret = -ENOMEM;
-			goto put_larbvenc;
-		}
+		if (!enc_clk->clk_info)
+			return -ENOMEM;
 	} else {
 		mtk_v4l2_err("Failed to get venc clock count");
-		ret = -EINVAL;
-		goto put_larbvenc;
+		return -EINVAL;
 	}
 
 	for (i = 0; i < enc_clk->clk_num; i++) {
@@ -68,29 +46,23 @@ int mtk_vcodec_init_enc_pm(struct mtk_vcodec_dev *mtkdev)
 			"clock-names", i, &clk_info->clk_name);
 		if (ret) {
 			mtk_v4l2_err("venc failed to get clk name %d", i);
-			goto put_larbvenc;
+			return ret;
 		}
 		clk_info->vcodec_clk = devm_clk_get(&pdev->dev,
 			clk_info->clk_name);
 		if (IS_ERR(clk_info->vcodec_clk)) {
 			mtk_v4l2_err("venc devm_clk_get (%d)%s fail", i,
 				clk_info->clk_name);
-			ret = PTR_ERR(clk_info->vcodec_clk);
-			goto put_larbvenc;
+			return PTR_ERR(clk_info->vcodec_clk);
 		}
 	}
 
 	return 0;
-
-put_larbvenc:
-	put_device(pm->larbvenc);
-	return ret;
 }
 
 void mtk_vcodec_release_enc_pm(struct mtk_vcodec_dev *mtkdev)
 {
 	pm_runtime_disable(mtkdev->pm.dev);
-	put_device(mtkdev->pm.larbvenc);
 }
 
 
@@ -108,11 +80,6 @@ void mtk_vcodec_enc_clock_on(struct mtk_vcodec_pm *pm)
 		}
 	}
 
-	ret = mtk_smi_larb_get(pm->larbvenc);
-	if (ret) {
-		mtk_v4l2_err("mtk_smi_larb_get larb3 fail %d", ret);
-		goto clkerr;
-	}
 	return;
 
 clkerr:
@@ -125,7 +92,6 @@ void mtk_vcodec_enc_clock_off(struct mtk_vcodec_pm *pm)
 	struct mtk_vcodec_clk *enc_clk = &pm->venc_clk;
 	int i = 0;
 
-	mtk_smi_larb_put(pm->larbvenc);
 	for (i = enc_clk->clk_num - 1; i >= 0; i--)
 		clk_disable_unprepare(enc_clk->clk_info[i].vcodec_clk);
 }
-- 
2.18.0


^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 09/12] media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Dafna Hirschfeld, Chun-Kuang Hu, Will Deacon, dri-devel,
	anthony.huang, youlin.pei, Irui Wang, Evan Green, Eizan Miyamoto,
	Matthias Kaehlcke, linux-arm-kernel, linux-media, devicetree,
	Philipp Zabel, Frank Wunderlich, yi.kuo, linux-mediatek,
	Hsin-Yi Wang, Tiffany Lin, anan.sun, srv_heupstream, acourbot,
	linux-kernel, iommu, Daniel Vetter, Robin Murphy

MediaTek IOMMU has already added the device_link between the consumer
and smi-larb device. If the vcodec device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.

CC: Tiffany Lin <tiffany.lin@mediatek.com>
CC: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: Tiffany Lin <tiffany.lin@mediatek.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
---
 .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c   | 37 +++-------------
 .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  3 --
 .../platform/mtk-vcodec/mtk_vcodec_enc.c      |  1 -
 .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c   | 44 +++----------------
 4 files changed, 10 insertions(+), 75 deletions(-)

diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
index 6038db96f71c..d0bf9aa3b29d 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
@@ -8,14 +8,12 @@
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/pm_runtime.h>
-#include <soc/mediatek/smi.h>
 
 #include "mtk_vcodec_dec_pm.h"
 #include "mtk_vcodec_util.h"
 
 int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
 {
-	struct device_node *node;
 	struct platform_device *pdev;
 	struct mtk_vcodec_pm *pm;
 	struct mtk_vcodec_clk *dec_clk;
@@ -26,18 +24,7 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
 	pm = &mtkdev->pm;
 	pm->mtkdev = mtkdev;
 	dec_clk = &pm->vdec_clk;
-	node = of_parse_phandle(pdev->dev.of_node, "mediatek,larb", 0);
-	if (!node) {
-		mtk_v4l2_err("of_parse_phandle mediatek,larb fail!");
-		return -1;
-	}
 
-	pdev = of_find_device_by_node(node);
-	of_node_put(node);
-	if (WARN_ON(!pdev)) {
-		return -1;
-	}
-	pm->larbvdec = &pdev->dev;
 	pdev = mtkdev->plat_dev;
 	pm->dev = &pdev->dev;
 
@@ -47,14 +34,11 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
 		dec_clk->clk_info = devm_kcalloc(&pdev->dev,
 			dec_clk->clk_num, sizeof(*clk_info),
 			GFP_KERNEL);
-		if (!dec_clk->clk_info) {
-			ret = -ENOMEM;
-			goto put_device;
-		}
+		if (!dec_clk->clk_info)
+			return -ENOMEM;
 	} else {
 		mtk_v4l2_err("Failed to get vdec clock count");
-		ret = -EINVAL;
-		goto put_device;
+		return -EINVAL;
 	}
 
 	for (i = 0; i < dec_clk->clk_num; i++) {
@@ -63,29 +47,24 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
 			"clock-names", i, &clk_info->clk_name);
 		if (ret) {
 			mtk_v4l2_err("Failed to get clock name id = %d", i);
-			goto put_device;
+			return ret;
 		}
 		clk_info->vcodec_clk = devm_clk_get(&pdev->dev,
 			clk_info->clk_name);
 		if (IS_ERR(clk_info->vcodec_clk)) {
 			mtk_v4l2_err("devm_clk_get (%d)%s fail", i,
 				clk_info->clk_name);
-			ret = PTR_ERR(clk_info->vcodec_clk);
-			goto put_device;
+			return PTR_ERR(clk_info->vcodec_clk);
 		}
 	}
 
 	pm_runtime_enable(&pdev->dev);
 	return 0;
-put_device:
-	put_device(pm->larbvdec);
-	return ret;
 }
 
 void mtk_vcodec_release_dec_pm(struct mtk_vcodec_dev *dev)
 {
 	pm_runtime_disable(dev->pm.dev);
-	put_device(dev->pm.larbvdec);
 }
 
 int mtk_vcodec_dec_pw_on(struct mtk_vcodec_pm *pm)
@@ -122,11 +101,6 @@ void mtk_vcodec_dec_clock_on(struct mtk_vcodec_pm *pm)
 		}
 	}
 
-	ret = mtk_smi_larb_get(pm->larbvdec);
-	if (ret) {
-		mtk_v4l2_err("mtk_smi_larb_get larbvdec fail %d", ret);
-		goto error;
-	}
 	return;
 
 error:
@@ -139,7 +113,6 @@ void mtk_vcodec_dec_clock_off(struct mtk_vcodec_pm *pm)
 	struct mtk_vcodec_clk *dec_clk = &pm->vdec_clk;
 	int i = 0;
 
-	mtk_smi_larb_put(pm->larbvdec);
 	for (i = dec_clk->clk_num - 1; i >= 0; i--)
 		clk_disable_unprepare(dec_clk->clk_info[i].vcodec_clk);
 }
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
index c6c7672fecfb..64b73dd880ce 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
@@ -189,10 +189,7 @@ struct mtk_vcodec_clk {
  */
 struct mtk_vcodec_pm {
 	struct mtk_vcodec_clk	vdec_clk;
-	struct device	*larbvdec;
-
 	struct mtk_vcodec_clk	venc_clk;
-	struct device	*larbvenc;
 	struct device	*dev;
 	struct mtk_vcodec_dev	*mtkdev;
 };
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
index 416f356af363..9a1515cf862d 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
@@ -8,7 +8,6 @@
 #include <media/v4l2-event.h>
 #include <media/v4l2-mem2mem.h>
 #include <media/videobuf2-dma-contig.h>
-#include <soc/mediatek/smi.h>
 #include <linux/pm_runtime.h>
 
 #include "mtk_vcodec_drv.h"
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
index 1b2e4930ed27..dffb190267ed 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
@@ -8,58 +8,36 @@
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/pm_runtime.h>
-#include <soc/mediatek/smi.h>
 
 #include "mtk_vcodec_enc_pm.h"
 #include "mtk_vcodec_util.h"
 
 int mtk_vcodec_init_enc_pm(struct mtk_vcodec_dev *mtkdev)
 {
-	struct device_node *node;
 	struct platform_device *pdev;
 	struct mtk_vcodec_pm *pm;
 	struct mtk_vcodec_clk *enc_clk;
 	struct mtk_vcodec_clk_info *clk_info;
 	int ret = 0, i = 0;
-	struct device *dev;
 
 	pdev = mtkdev->plat_dev;
 	pm = &mtkdev->pm;
 	memset(pm, 0, sizeof(struct mtk_vcodec_pm));
 	pm->mtkdev = mtkdev;
 	pm->dev = &pdev->dev;
-	dev = &pdev->dev;
 	enc_clk = &pm->venc_clk;
 
-	node = of_parse_phandle(dev->of_node, "mediatek,larb", 0);
-	if (!node) {
-		mtk_v4l2_err("no mediatek,larb found");
-		return -ENODEV;
-	}
-	pdev = of_find_device_by_node(node);
-	of_node_put(node);
-	if (!pdev) {
-		mtk_v4l2_err("no mediatek,larb device found");
-		return -ENODEV;
-	}
-	pm->larbvenc = &pdev->dev;
-	pdev = mtkdev->plat_dev;
-	pm->dev = &pdev->dev;
-
 	enc_clk->clk_num = of_property_count_strings(pdev->dev.of_node,
 		"clock-names");
 	if (enc_clk->clk_num > 0) {
 		enc_clk->clk_info = devm_kcalloc(&pdev->dev,
 			enc_clk->clk_num, sizeof(*clk_info),
 			GFP_KERNEL);
-		if (!enc_clk->clk_info) {
-			ret = -ENOMEM;
-			goto put_larbvenc;
-		}
+		if (!enc_clk->clk_info)
+			return -ENOMEM;
 	} else {
 		mtk_v4l2_err("Failed to get venc clock count");
-		ret = -EINVAL;
-		goto put_larbvenc;
+		return -EINVAL;
 	}
 
 	for (i = 0; i < enc_clk->clk_num; i++) {
@@ -68,29 +46,23 @@ int mtk_vcodec_init_enc_pm(struct mtk_vcodec_dev *mtkdev)
 			"clock-names", i, &clk_info->clk_name);
 		if (ret) {
 			mtk_v4l2_err("venc failed to get clk name %d", i);
-			goto put_larbvenc;
+			return ret;
 		}
 		clk_info->vcodec_clk = devm_clk_get(&pdev->dev,
 			clk_info->clk_name);
 		if (IS_ERR(clk_info->vcodec_clk)) {
 			mtk_v4l2_err("venc devm_clk_get (%d)%s fail", i,
 				clk_info->clk_name);
-			ret = PTR_ERR(clk_info->vcodec_clk);
-			goto put_larbvenc;
+			return PTR_ERR(clk_info->vcodec_clk);
 		}
 	}
 
 	return 0;
-
-put_larbvenc:
-	put_device(pm->larbvenc);
-	return ret;
 }
 
 void mtk_vcodec_release_enc_pm(struct mtk_vcodec_dev *mtkdev)
 {
 	pm_runtime_disable(mtkdev->pm.dev);
-	put_device(mtkdev->pm.larbvenc);
 }
 
 
@@ -108,11 +80,6 @@ void mtk_vcodec_enc_clock_on(struct mtk_vcodec_pm *pm)
 		}
 	}
 
-	ret = mtk_smi_larb_get(pm->larbvenc);
-	if (ret) {
-		mtk_v4l2_err("mtk_smi_larb_get larb3 fail %d", ret);
-		goto clkerr;
-	}
 	return;
 
 clkerr:
@@ -125,7 +92,6 @@ void mtk_vcodec_enc_clock_off(struct mtk_vcodec_pm *pm)
 	struct mtk_vcodec_clk *enc_clk = &pm->venc_clk;
 	int i = 0;
 
-	mtk_smi_larb_put(pm->larbvenc);
 	for (i = enc_clk->clk_num - 1; i >= 0; i--)
 		clk_disable_unprepare(enc_clk->clk_info[i].vcodec_clk);
 }
-- 
2.18.0

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 09/12] media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich, Irui Wang

MediaTek IOMMU has already added the device_link between the consumer
and smi-larb device. If the vcodec device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.

CC: Tiffany Lin <tiffany.lin@mediatek.com>
CC: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: Tiffany Lin <tiffany.lin@mediatek.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
---
 .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c   | 37 +++-------------
 .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  3 --
 .../platform/mtk-vcodec/mtk_vcodec_enc.c      |  1 -
 .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c   | 44 +++----------------
 4 files changed, 10 insertions(+), 75 deletions(-)

diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
index 6038db96f71c..d0bf9aa3b29d 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
@@ -8,14 +8,12 @@
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/pm_runtime.h>
-#include <soc/mediatek/smi.h>
 
 #include "mtk_vcodec_dec_pm.h"
 #include "mtk_vcodec_util.h"
 
 int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
 {
-	struct device_node *node;
 	struct platform_device *pdev;
 	struct mtk_vcodec_pm *pm;
 	struct mtk_vcodec_clk *dec_clk;
@@ -26,18 +24,7 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
 	pm = &mtkdev->pm;
 	pm->mtkdev = mtkdev;
 	dec_clk = &pm->vdec_clk;
-	node = of_parse_phandle(pdev->dev.of_node, "mediatek,larb", 0);
-	if (!node) {
-		mtk_v4l2_err("of_parse_phandle mediatek,larb fail!");
-		return -1;
-	}
 
-	pdev = of_find_device_by_node(node);
-	of_node_put(node);
-	if (WARN_ON(!pdev)) {
-		return -1;
-	}
-	pm->larbvdec = &pdev->dev;
 	pdev = mtkdev->plat_dev;
 	pm->dev = &pdev->dev;
 
@@ -47,14 +34,11 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
 		dec_clk->clk_info = devm_kcalloc(&pdev->dev,
 			dec_clk->clk_num, sizeof(*clk_info),
 			GFP_KERNEL);
-		if (!dec_clk->clk_info) {
-			ret = -ENOMEM;
-			goto put_device;
-		}
+		if (!dec_clk->clk_info)
+			return -ENOMEM;
 	} else {
 		mtk_v4l2_err("Failed to get vdec clock count");
-		ret = -EINVAL;
-		goto put_device;
+		return -EINVAL;
 	}
 
 	for (i = 0; i < dec_clk->clk_num; i++) {
@@ -63,29 +47,24 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
 			"clock-names", i, &clk_info->clk_name);
 		if (ret) {
 			mtk_v4l2_err("Failed to get clock name id = %d", i);
-			goto put_device;
+			return ret;
 		}
 		clk_info->vcodec_clk = devm_clk_get(&pdev->dev,
 			clk_info->clk_name);
 		if (IS_ERR(clk_info->vcodec_clk)) {
 			mtk_v4l2_err("devm_clk_get (%d)%s fail", i,
 				clk_info->clk_name);
-			ret = PTR_ERR(clk_info->vcodec_clk);
-			goto put_device;
+			return PTR_ERR(clk_info->vcodec_clk);
 		}
 	}
 
 	pm_runtime_enable(&pdev->dev);
 	return 0;
-put_device:
-	put_device(pm->larbvdec);
-	return ret;
 }
 
 void mtk_vcodec_release_dec_pm(struct mtk_vcodec_dev *dev)
 {
 	pm_runtime_disable(dev->pm.dev);
-	put_device(dev->pm.larbvdec);
 }
 
 int mtk_vcodec_dec_pw_on(struct mtk_vcodec_pm *pm)
@@ -122,11 +101,6 @@ void mtk_vcodec_dec_clock_on(struct mtk_vcodec_pm *pm)
 		}
 	}
 
-	ret = mtk_smi_larb_get(pm->larbvdec);
-	if (ret) {
-		mtk_v4l2_err("mtk_smi_larb_get larbvdec fail %d", ret);
-		goto error;
-	}
 	return;
 
 error:
@@ -139,7 +113,6 @@ void mtk_vcodec_dec_clock_off(struct mtk_vcodec_pm *pm)
 	struct mtk_vcodec_clk *dec_clk = &pm->vdec_clk;
 	int i = 0;
 
-	mtk_smi_larb_put(pm->larbvdec);
 	for (i = dec_clk->clk_num - 1; i >= 0; i--)
 		clk_disable_unprepare(dec_clk->clk_info[i].vcodec_clk);
 }
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
index c6c7672fecfb..64b73dd880ce 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
@@ -189,10 +189,7 @@ struct mtk_vcodec_clk {
  */
 struct mtk_vcodec_pm {
 	struct mtk_vcodec_clk	vdec_clk;
-	struct device	*larbvdec;
-
 	struct mtk_vcodec_clk	venc_clk;
-	struct device	*larbvenc;
 	struct device	*dev;
 	struct mtk_vcodec_dev	*mtkdev;
 };
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
index 416f356af363..9a1515cf862d 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
@@ -8,7 +8,6 @@
 #include <media/v4l2-event.h>
 #include <media/v4l2-mem2mem.h>
 #include <media/videobuf2-dma-contig.h>
-#include <soc/mediatek/smi.h>
 #include <linux/pm_runtime.h>
 
 #include "mtk_vcodec_drv.h"
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
index 1b2e4930ed27..dffb190267ed 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
@@ -8,58 +8,36 @@
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/pm_runtime.h>
-#include <soc/mediatek/smi.h>
 
 #include "mtk_vcodec_enc_pm.h"
 #include "mtk_vcodec_util.h"
 
 int mtk_vcodec_init_enc_pm(struct mtk_vcodec_dev *mtkdev)
 {
-	struct device_node *node;
 	struct platform_device *pdev;
 	struct mtk_vcodec_pm *pm;
 	struct mtk_vcodec_clk *enc_clk;
 	struct mtk_vcodec_clk_info *clk_info;
 	int ret = 0, i = 0;
-	struct device *dev;
 
 	pdev = mtkdev->plat_dev;
 	pm = &mtkdev->pm;
 	memset(pm, 0, sizeof(struct mtk_vcodec_pm));
 	pm->mtkdev = mtkdev;
 	pm->dev = &pdev->dev;
-	dev = &pdev->dev;
 	enc_clk = &pm->venc_clk;
 
-	node = of_parse_phandle(dev->of_node, "mediatek,larb", 0);
-	if (!node) {
-		mtk_v4l2_err("no mediatek,larb found");
-		return -ENODEV;
-	}
-	pdev = of_find_device_by_node(node);
-	of_node_put(node);
-	if (!pdev) {
-		mtk_v4l2_err("no mediatek,larb device found");
-		return -ENODEV;
-	}
-	pm->larbvenc = &pdev->dev;
-	pdev = mtkdev->plat_dev;
-	pm->dev = &pdev->dev;
-
 	enc_clk->clk_num = of_property_count_strings(pdev->dev.of_node,
 		"clock-names");
 	if (enc_clk->clk_num > 0) {
 		enc_clk->clk_info = devm_kcalloc(&pdev->dev,
 			enc_clk->clk_num, sizeof(*clk_info),
 			GFP_KERNEL);
-		if (!enc_clk->clk_info) {
-			ret = -ENOMEM;
-			goto put_larbvenc;
-		}
+		if (!enc_clk->clk_info)
+			return -ENOMEM;
 	} else {
 		mtk_v4l2_err("Failed to get venc clock count");
-		ret = -EINVAL;
-		goto put_larbvenc;
+		return -EINVAL;
 	}
 
 	for (i = 0; i < enc_clk->clk_num; i++) {
@@ -68,29 +46,23 @@ int mtk_vcodec_init_enc_pm(struct mtk_vcodec_dev *mtkdev)
 			"clock-names", i, &clk_info->clk_name);
 		if (ret) {
 			mtk_v4l2_err("venc failed to get clk name %d", i);
-			goto put_larbvenc;
+			return ret;
 		}
 		clk_info->vcodec_clk = devm_clk_get(&pdev->dev,
 			clk_info->clk_name);
 		if (IS_ERR(clk_info->vcodec_clk)) {
 			mtk_v4l2_err("venc devm_clk_get (%d)%s fail", i,
 				clk_info->clk_name);
-			ret = PTR_ERR(clk_info->vcodec_clk);
-			goto put_larbvenc;
+			return PTR_ERR(clk_info->vcodec_clk);
 		}
 	}
 
 	return 0;
-
-put_larbvenc:
-	put_device(pm->larbvenc);
-	return ret;
 }
 
 void mtk_vcodec_release_enc_pm(struct mtk_vcodec_dev *mtkdev)
 {
 	pm_runtime_disable(mtkdev->pm.dev);
-	put_device(mtkdev->pm.larbvenc);
 }
 
 
@@ -108,11 +80,6 @@ void mtk_vcodec_enc_clock_on(struct mtk_vcodec_pm *pm)
 		}
 	}
 
-	ret = mtk_smi_larb_get(pm->larbvenc);
-	if (ret) {
-		mtk_v4l2_err("mtk_smi_larb_get larb3 fail %d", ret);
-		goto clkerr;
-	}
 	return;
 
 clkerr:
@@ -125,7 +92,6 @@ void mtk_vcodec_enc_clock_off(struct mtk_vcodec_pm *pm)
 	struct mtk_vcodec_clk *enc_clk = &pm->venc_clk;
 	int i = 0;
 
-	mtk_smi_larb_put(pm->larbvenc);
 	for (i = enc_clk->clk_num - 1; i >= 0; i--)
 		clk_disable_unprepare(enc_clk->clk_info[i].vcodec_clk);
 }
-- 
2.18.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 09/12] media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich, Irui Wang

MediaTek IOMMU has already added the device_link between the consumer
and smi-larb device. If the vcodec device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.

CC: Tiffany Lin <tiffany.lin@mediatek.com>
CC: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: Tiffany Lin <tiffany.lin@mediatek.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
---
 .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c   | 37 +++-------------
 .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  3 --
 .../platform/mtk-vcodec/mtk_vcodec_enc.c      |  1 -
 .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c   | 44 +++----------------
 4 files changed, 10 insertions(+), 75 deletions(-)

diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
index 6038db96f71c..d0bf9aa3b29d 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
@@ -8,14 +8,12 @@
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/pm_runtime.h>
-#include <soc/mediatek/smi.h>
 
 #include "mtk_vcodec_dec_pm.h"
 #include "mtk_vcodec_util.h"
 
 int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
 {
-	struct device_node *node;
 	struct platform_device *pdev;
 	struct mtk_vcodec_pm *pm;
 	struct mtk_vcodec_clk *dec_clk;
@@ -26,18 +24,7 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
 	pm = &mtkdev->pm;
 	pm->mtkdev = mtkdev;
 	dec_clk = &pm->vdec_clk;
-	node = of_parse_phandle(pdev->dev.of_node, "mediatek,larb", 0);
-	if (!node) {
-		mtk_v4l2_err("of_parse_phandle mediatek,larb fail!");
-		return -1;
-	}
 
-	pdev = of_find_device_by_node(node);
-	of_node_put(node);
-	if (WARN_ON(!pdev)) {
-		return -1;
-	}
-	pm->larbvdec = &pdev->dev;
 	pdev = mtkdev->plat_dev;
 	pm->dev = &pdev->dev;
 
@@ -47,14 +34,11 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
 		dec_clk->clk_info = devm_kcalloc(&pdev->dev,
 			dec_clk->clk_num, sizeof(*clk_info),
 			GFP_KERNEL);
-		if (!dec_clk->clk_info) {
-			ret = -ENOMEM;
-			goto put_device;
-		}
+		if (!dec_clk->clk_info)
+			return -ENOMEM;
 	} else {
 		mtk_v4l2_err("Failed to get vdec clock count");
-		ret = -EINVAL;
-		goto put_device;
+		return -EINVAL;
 	}
 
 	for (i = 0; i < dec_clk->clk_num; i++) {
@@ -63,29 +47,24 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
 			"clock-names", i, &clk_info->clk_name);
 		if (ret) {
 			mtk_v4l2_err("Failed to get clock name id = %d", i);
-			goto put_device;
+			return ret;
 		}
 		clk_info->vcodec_clk = devm_clk_get(&pdev->dev,
 			clk_info->clk_name);
 		if (IS_ERR(clk_info->vcodec_clk)) {
 			mtk_v4l2_err("devm_clk_get (%d)%s fail", i,
 				clk_info->clk_name);
-			ret = PTR_ERR(clk_info->vcodec_clk);
-			goto put_device;
+			return PTR_ERR(clk_info->vcodec_clk);
 		}
 	}
 
 	pm_runtime_enable(&pdev->dev);
 	return 0;
-put_device:
-	put_device(pm->larbvdec);
-	return ret;
 }
 
 void mtk_vcodec_release_dec_pm(struct mtk_vcodec_dev *dev)
 {
 	pm_runtime_disable(dev->pm.dev);
-	put_device(dev->pm.larbvdec);
 }
 
 int mtk_vcodec_dec_pw_on(struct mtk_vcodec_pm *pm)
@@ -122,11 +101,6 @@ void mtk_vcodec_dec_clock_on(struct mtk_vcodec_pm *pm)
 		}
 	}
 
-	ret = mtk_smi_larb_get(pm->larbvdec);
-	if (ret) {
-		mtk_v4l2_err("mtk_smi_larb_get larbvdec fail %d", ret);
-		goto error;
-	}
 	return;
 
 error:
@@ -139,7 +113,6 @@ void mtk_vcodec_dec_clock_off(struct mtk_vcodec_pm *pm)
 	struct mtk_vcodec_clk *dec_clk = &pm->vdec_clk;
 	int i = 0;
 
-	mtk_smi_larb_put(pm->larbvdec);
 	for (i = dec_clk->clk_num - 1; i >= 0; i--)
 		clk_disable_unprepare(dec_clk->clk_info[i].vcodec_clk);
 }
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
index c6c7672fecfb..64b73dd880ce 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
@@ -189,10 +189,7 @@ struct mtk_vcodec_clk {
  */
 struct mtk_vcodec_pm {
 	struct mtk_vcodec_clk	vdec_clk;
-	struct device	*larbvdec;
-
 	struct mtk_vcodec_clk	venc_clk;
-	struct device	*larbvenc;
 	struct device	*dev;
 	struct mtk_vcodec_dev	*mtkdev;
 };
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
index 416f356af363..9a1515cf862d 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
@@ -8,7 +8,6 @@
 #include <media/v4l2-event.h>
 #include <media/v4l2-mem2mem.h>
 #include <media/videobuf2-dma-contig.h>
-#include <soc/mediatek/smi.h>
 #include <linux/pm_runtime.h>
 
 #include "mtk_vcodec_drv.h"
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
index 1b2e4930ed27..dffb190267ed 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
@@ -8,58 +8,36 @@
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/pm_runtime.h>
-#include <soc/mediatek/smi.h>
 
 #include "mtk_vcodec_enc_pm.h"
 #include "mtk_vcodec_util.h"
 
 int mtk_vcodec_init_enc_pm(struct mtk_vcodec_dev *mtkdev)
 {
-	struct device_node *node;
 	struct platform_device *pdev;
 	struct mtk_vcodec_pm *pm;
 	struct mtk_vcodec_clk *enc_clk;
 	struct mtk_vcodec_clk_info *clk_info;
 	int ret = 0, i = 0;
-	struct device *dev;
 
 	pdev = mtkdev->plat_dev;
 	pm = &mtkdev->pm;
 	memset(pm, 0, sizeof(struct mtk_vcodec_pm));
 	pm->mtkdev = mtkdev;
 	pm->dev = &pdev->dev;
-	dev = &pdev->dev;
 	enc_clk = &pm->venc_clk;
 
-	node = of_parse_phandle(dev->of_node, "mediatek,larb", 0);
-	if (!node) {
-		mtk_v4l2_err("no mediatek,larb found");
-		return -ENODEV;
-	}
-	pdev = of_find_device_by_node(node);
-	of_node_put(node);
-	if (!pdev) {
-		mtk_v4l2_err("no mediatek,larb device found");
-		return -ENODEV;
-	}
-	pm->larbvenc = &pdev->dev;
-	pdev = mtkdev->plat_dev;
-	pm->dev = &pdev->dev;
-
 	enc_clk->clk_num = of_property_count_strings(pdev->dev.of_node,
 		"clock-names");
 	if (enc_clk->clk_num > 0) {
 		enc_clk->clk_info = devm_kcalloc(&pdev->dev,
 			enc_clk->clk_num, sizeof(*clk_info),
 			GFP_KERNEL);
-		if (!enc_clk->clk_info) {
-			ret = -ENOMEM;
-			goto put_larbvenc;
-		}
+		if (!enc_clk->clk_info)
+			return -ENOMEM;
 	} else {
 		mtk_v4l2_err("Failed to get venc clock count");
-		ret = -EINVAL;
-		goto put_larbvenc;
+		return -EINVAL;
 	}
 
 	for (i = 0; i < enc_clk->clk_num; i++) {
@@ -68,29 +46,23 @@ int mtk_vcodec_init_enc_pm(struct mtk_vcodec_dev *mtkdev)
 			"clock-names", i, &clk_info->clk_name);
 		if (ret) {
 			mtk_v4l2_err("venc failed to get clk name %d", i);
-			goto put_larbvenc;
+			return ret;
 		}
 		clk_info->vcodec_clk = devm_clk_get(&pdev->dev,
 			clk_info->clk_name);
 		if (IS_ERR(clk_info->vcodec_clk)) {
 			mtk_v4l2_err("venc devm_clk_get (%d)%s fail", i,
 				clk_info->clk_name);
-			ret = PTR_ERR(clk_info->vcodec_clk);
-			goto put_larbvenc;
+			return PTR_ERR(clk_info->vcodec_clk);
 		}
 	}
 
 	return 0;
-
-put_larbvenc:
-	put_device(pm->larbvenc);
-	return ret;
 }
 
 void mtk_vcodec_release_enc_pm(struct mtk_vcodec_dev *mtkdev)
 {
 	pm_runtime_disable(mtkdev->pm.dev);
-	put_device(mtkdev->pm.larbvenc);
 }
 
 
@@ -108,11 +80,6 @@ void mtk_vcodec_enc_clock_on(struct mtk_vcodec_pm *pm)
 		}
 	}
 
-	ret = mtk_smi_larb_get(pm->larbvenc);
-	if (ret) {
-		mtk_v4l2_err("mtk_smi_larb_get larb3 fail %d", ret);
-		goto clkerr;
-	}
 	return;
 
 clkerr:
@@ -125,7 +92,6 @@ void mtk_vcodec_enc_clock_off(struct mtk_vcodec_pm *pm)
 	struct mtk_vcodec_clk *enc_clk = &pm->venc_clk;
 	int i = 0;
 
-	mtk_smi_larb_put(pm->larbvenc);
 	for (i = enc_clk->clk_num - 1; i >= 0; i--)
 		clk_disable_unprepare(enc_clk->clk_info[i].vcodec_clk);
 }
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 10/12] memory: mtk-smi: Get rid of mtk_smi_larb_get/put
  2021-09-29  1:37 ` Yong Wu
                     ` (2 preceding siblings ...)
  (?)
@ 2021-09-29  1:37   ` Yong Wu
  -1 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich

After adding device_link between the iommu consumer and smi-larb,
the pm_runtime_get(_sync) of smi-larb and smi-common will be called
automatically. we can get rid of mtk_smi_larb_get/put.

CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 drivers/memory/mtk-smi.c   | 14 --------------
 include/soc/mediatek/smi.h | 20 --------------------
 2 files changed, 34 deletions(-)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index c5fb51f73b34..7c61c924e220 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -134,20 +134,6 @@ static void mtk_smi_clk_disable(const struct mtk_smi *smi)
 	clk_disable_unprepare(smi->clk_apb);
 }
 
-int mtk_smi_larb_get(struct device *larbdev)
-{
-	int ret = pm_runtime_resume_and_get(larbdev);
-
-	return (ret < 0) ? ret : 0;
-}
-EXPORT_SYMBOL_GPL(mtk_smi_larb_get);
-
-void mtk_smi_larb_put(struct device *larbdev)
-{
-	pm_runtime_put_sync(larbdev);
-}
-EXPORT_SYMBOL_GPL(mtk_smi_larb_put);
-
 static int
 mtk_smi_larb_bind(struct device *dev, struct device *master, void *data)
 {
diff --git a/include/soc/mediatek/smi.h b/include/soc/mediatek/smi.h
index 15e3397cec58..11f7d6b59642 100644
--- a/include/soc/mediatek/smi.h
+++ b/include/soc/mediatek/smi.h
@@ -19,26 +19,6 @@ struct mtk_smi_larb_iommu {
 	unsigned char  bank[32];
 };
 
-/*
- * mtk_smi_larb_get: Enable the power domain and clocks for this local arbiter.
- *                   It also initialize some basic setting(like iommu).
- * mtk_smi_larb_put: Disable the power domain and clocks for this local arbiter.
- * Both should be called in non-atomic context.
- *
- * Returns 0 if successful, negative on failure.
- */
-int mtk_smi_larb_get(struct device *larbdev);
-void mtk_smi_larb_put(struct device *larbdev);
-
-#else
-
-static inline int mtk_smi_larb_get(struct device *larbdev)
-{
-	return 0;
-}
-
-static inline void mtk_smi_larb_put(struct device *larbdev) { }
-
 #endif
 
 #endif
-- 
2.18.0


^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 10/12] memory: mtk-smi: Get rid of mtk_smi_larb_get/put
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Dafna Hirschfeld, Chun-Kuang Hu, Will Deacon, dri-devel,
	anthony.huang, youlin.pei, Evan Green, Eizan Miyamoto,
	Matthias Kaehlcke, linux-arm-kernel, linux-media, devicetree,
	Philipp Zabel, Frank Wunderlich, yi.kuo, linux-mediatek,
	Hsin-Yi Wang, Tiffany Lin, anan.sun, srv_heupstream, acourbot,
	linux-kernel, iommu, Daniel Vetter, Robin Murphy

After adding device_link between the iommu consumer and smi-larb,
the pm_runtime_get(_sync) of smi-larb and smi-common will be called
automatically. we can get rid of mtk_smi_larb_get/put.

CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 drivers/memory/mtk-smi.c   | 14 --------------
 include/soc/mediatek/smi.h | 20 --------------------
 2 files changed, 34 deletions(-)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index c5fb51f73b34..7c61c924e220 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -134,20 +134,6 @@ static void mtk_smi_clk_disable(const struct mtk_smi *smi)
 	clk_disable_unprepare(smi->clk_apb);
 }
 
-int mtk_smi_larb_get(struct device *larbdev)
-{
-	int ret = pm_runtime_resume_and_get(larbdev);
-
-	return (ret < 0) ? ret : 0;
-}
-EXPORT_SYMBOL_GPL(mtk_smi_larb_get);
-
-void mtk_smi_larb_put(struct device *larbdev)
-{
-	pm_runtime_put_sync(larbdev);
-}
-EXPORT_SYMBOL_GPL(mtk_smi_larb_put);
-
 static int
 mtk_smi_larb_bind(struct device *dev, struct device *master, void *data)
 {
diff --git a/include/soc/mediatek/smi.h b/include/soc/mediatek/smi.h
index 15e3397cec58..11f7d6b59642 100644
--- a/include/soc/mediatek/smi.h
+++ b/include/soc/mediatek/smi.h
@@ -19,26 +19,6 @@ struct mtk_smi_larb_iommu {
 	unsigned char  bank[32];
 };
 
-/*
- * mtk_smi_larb_get: Enable the power domain and clocks for this local arbiter.
- *                   It also initialize some basic setting(like iommu).
- * mtk_smi_larb_put: Disable the power domain and clocks for this local arbiter.
- * Both should be called in non-atomic context.
- *
- * Returns 0 if successful, negative on failure.
- */
-int mtk_smi_larb_get(struct device *larbdev);
-void mtk_smi_larb_put(struct device *larbdev);
-
-#else
-
-static inline int mtk_smi_larb_get(struct device *larbdev)
-{
-	return 0;
-}
-
-static inline void mtk_smi_larb_put(struct device *larbdev) { }
-
 #endif
 
 #endif
-- 
2.18.0

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 10/12] memory: mtk-smi: Get rid of mtk_smi_larb_get/put
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich

After adding device_link between the iommu consumer and smi-larb,
the pm_runtime_get(_sync) of smi-larb and smi-common will be called
automatically. we can get rid of mtk_smi_larb_get/put.

CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 drivers/memory/mtk-smi.c   | 14 --------------
 include/soc/mediatek/smi.h | 20 --------------------
 2 files changed, 34 deletions(-)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index c5fb51f73b34..7c61c924e220 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -134,20 +134,6 @@ static void mtk_smi_clk_disable(const struct mtk_smi *smi)
 	clk_disable_unprepare(smi->clk_apb);
 }
 
-int mtk_smi_larb_get(struct device *larbdev)
-{
-	int ret = pm_runtime_resume_and_get(larbdev);
-
-	return (ret < 0) ? ret : 0;
-}
-EXPORT_SYMBOL_GPL(mtk_smi_larb_get);
-
-void mtk_smi_larb_put(struct device *larbdev)
-{
-	pm_runtime_put_sync(larbdev);
-}
-EXPORT_SYMBOL_GPL(mtk_smi_larb_put);
-
 static int
 mtk_smi_larb_bind(struct device *dev, struct device *master, void *data)
 {
diff --git a/include/soc/mediatek/smi.h b/include/soc/mediatek/smi.h
index 15e3397cec58..11f7d6b59642 100644
--- a/include/soc/mediatek/smi.h
+++ b/include/soc/mediatek/smi.h
@@ -19,26 +19,6 @@ struct mtk_smi_larb_iommu {
 	unsigned char  bank[32];
 };
 
-/*
- * mtk_smi_larb_get: Enable the power domain and clocks for this local arbiter.
- *                   It also initialize some basic setting(like iommu).
- * mtk_smi_larb_put: Disable the power domain and clocks for this local arbiter.
- * Both should be called in non-atomic context.
- *
- * Returns 0 if successful, negative on failure.
- */
-int mtk_smi_larb_get(struct device *larbdev);
-void mtk_smi_larb_put(struct device *larbdev);
-
-#else
-
-static inline int mtk_smi_larb_get(struct device *larbdev)
-{
-	return 0;
-}
-
-static inline void mtk_smi_larb_put(struct device *larbdev) { }
-
 #endif
 
 #endif
-- 
2.18.0


^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 10/12] memory: mtk-smi: Get rid of mtk_smi_larb_get/put
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich

After adding device_link between the iommu consumer and smi-larb,
the pm_runtime_get(_sync) of smi-larb and smi-common will be called
automatically. we can get rid of mtk_smi_larb_get/put.

CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 drivers/memory/mtk-smi.c   | 14 --------------
 include/soc/mediatek/smi.h | 20 --------------------
 2 files changed, 34 deletions(-)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index c5fb51f73b34..7c61c924e220 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -134,20 +134,6 @@ static void mtk_smi_clk_disable(const struct mtk_smi *smi)
 	clk_disable_unprepare(smi->clk_apb);
 }
 
-int mtk_smi_larb_get(struct device *larbdev)
-{
-	int ret = pm_runtime_resume_and_get(larbdev);
-
-	return (ret < 0) ? ret : 0;
-}
-EXPORT_SYMBOL_GPL(mtk_smi_larb_get);
-
-void mtk_smi_larb_put(struct device *larbdev)
-{
-	pm_runtime_put_sync(larbdev);
-}
-EXPORT_SYMBOL_GPL(mtk_smi_larb_put);
-
 static int
 mtk_smi_larb_bind(struct device *dev, struct device *master, void *data)
 {
diff --git a/include/soc/mediatek/smi.h b/include/soc/mediatek/smi.h
index 15e3397cec58..11f7d6b59642 100644
--- a/include/soc/mediatek/smi.h
+++ b/include/soc/mediatek/smi.h
@@ -19,26 +19,6 @@ struct mtk_smi_larb_iommu {
 	unsigned char  bank[32];
 };
 
-/*
- * mtk_smi_larb_get: Enable the power domain and clocks for this local arbiter.
- *                   It also initialize some basic setting(like iommu).
- * mtk_smi_larb_put: Disable the power domain and clocks for this local arbiter.
- * Both should be called in non-atomic context.
- *
- * Returns 0 if successful, negative on failure.
- */
-int mtk_smi_larb_get(struct device *larbdev);
-void mtk_smi_larb_put(struct device *larbdev);
-
-#else
-
-static inline int mtk_smi_larb_get(struct device *larbdev)
-{
-	return 0;
-}
-
-static inline void mtk_smi_larb_put(struct device *larbdev) { }
-
 #endif
 
 #endif
-- 
2.18.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 10/12] memory: mtk-smi: Get rid of mtk_smi_larb_get/put
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich

After adding device_link between the iommu consumer and smi-larb,
the pm_runtime_get(_sync) of smi-larb and smi-common will be called
automatically. we can get rid of mtk_smi_larb_get/put.

CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 drivers/memory/mtk-smi.c   | 14 --------------
 include/soc/mediatek/smi.h | 20 --------------------
 2 files changed, 34 deletions(-)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index c5fb51f73b34..7c61c924e220 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -134,20 +134,6 @@ static void mtk_smi_clk_disable(const struct mtk_smi *smi)
 	clk_disable_unprepare(smi->clk_apb);
 }
 
-int mtk_smi_larb_get(struct device *larbdev)
-{
-	int ret = pm_runtime_resume_and_get(larbdev);
-
-	return (ret < 0) ? ret : 0;
-}
-EXPORT_SYMBOL_GPL(mtk_smi_larb_get);
-
-void mtk_smi_larb_put(struct device *larbdev)
-{
-	pm_runtime_put_sync(larbdev);
-}
-EXPORT_SYMBOL_GPL(mtk_smi_larb_put);
-
 static int
 mtk_smi_larb_bind(struct device *dev, struct device *master, void *data)
 {
diff --git a/include/soc/mediatek/smi.h b/include/soc/mediatek/smi.h
index 15e3397cec58..11f7d6b59642 100644
--- a/include/soc/mediatek/smi.h
+++ b/include/soc/mediatek/smi.h
@@ -19,26 +19,6 @@ struct mtk_smi_larb_iommu {
 	unsigned char  bank[32];
 };
 
-/*
- * mtk_smi_larb_get: Enable the power domain and clocks for this local arbiter.
- *                   It also initialize some basic setting(like iommu).
- * mtk_smi_larb_put: Disable the power domain and clocks for this local arbiter.
- * Both should be called in non-atomic context.
- *
- * Returns 0 if successful, negative on failure.
- */
-int mtk_smi_larb_get(struct device *larbdev);
-void mtk_smi_larb_put(struct device *larbdev);
-
-#else
-
-static inline int mtk_smi_larb_get(struct device *larbdev)
-{
-	return 0;
-}
-
-static inline void mtk_smi_larb_put(struct device *larbdev) { }
-
 #endif
 
 #endif
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 11/12] arm: dts: mediatek: Get rid of mediatek,larb for MM nodes
  2021-09-29  1:37 ` Yong Wu
                     ` (2 preceding siblings ...)
  (?)
@ 2021-09-29  1:37   ` Yong Wu
  -1 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich

After adding device_link between the IOMMU consumer and smi, the
mediatek,larb is unnecessary now.

CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 arch/arm/boot/dts/mt2701.dtsi  | 2 --
 arch/arm/boot/dts/mt7623n.dtsi | 5 -----
 2 files changed, 7 deletions(-)

diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 4776f85d6d5b..ef583cfd3baf 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -564,7 +564,6 @@
 		clock-names = "jpgdec-smi",
 			      "jpgdec";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
 		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
 			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
 	};
@@ -577,7 +576,6 @@
 		clocks =  <&imgsys CLK_IMG_VENC>;
 		clock-names = "jpgenc";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
 		iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
 			 <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
 	};
diff --git a/arch/arm/boot/dts/mt7623n.dtsi b/arch/arm/boot/dts/mt7623n.dtsi
index bcb0846e29fd..3adab5cd1fef 100644
--- a/arch/arm/boot/dts/mt7623n.dtsi
+++ b/arch/arm/boot/dts/mt7623n.dtsi
@@ -121,7 +121,6 @@
 		clock-names = "jpgdec-smi",
 			      "jpgdec";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
 		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
 			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
 	};
@@ -144,7 +143,6 @@
 		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&mmsys CLK_MM_DISP_OVL>;
 		iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>;
-		mediatek,larb = <&larb0>;
 	};
 
 	rdma0: rdma@14008000 {
@@ -154,7 +152,6 @@
 		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&mmsys CLK_MM_DISP_RDMA>;
 		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>;
-		mediatek,larb = <&larb0>;
 	};
 
 	wdma@14009000 {
@@ -164,7 +161,6 @@
 		interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&mmsys CLK_MM_DISP_WDMA>;
 		iommus = <&iommu MT2701_M4U_PORT_DISP_WDMA>;
-		mediatek,larb = <&larb0>;
 	};
 
 	bls: pwm@1400a000 {
@@ -215,7 +211,6 @@
 		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&mmsys CLK_MM_DISP_RDMA1>;
 		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>;
-		mediatek,larb = <&larb0>;
 	};
 
 	dpi0: dpi@14014000 {
-- 
2.18.0


^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 11/12] arm: dts: mediatek: Get rid of mediatek, larb for MM nodes
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Dafna Hirschfeld, Chun-Kuang Hu, Will Deacon, dri-devel,
	anthony.huang, youlin.pei, Evan Green, Eizan Miyamoto,
	Matthias Kaehlcke, linux-arm-kernel, linux-media, devicetree,
	Philipp Zabel, Frank Wunderlich, yi.kuo, linux-mediatek,
	Hsin-Yi Wang, Tiffany Lin, anan.sun, srv_heupstream, acourbot,
	linux-kernel, iommu, Daniel Vetter, Robin Murphy

After adding device_link between the IOMMU consumer and smi, the
mediatek,larb is unnecessary now.

CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 arch/arm/boot/dts/mt2701.dtsi  | 2 --
 arch/arm/boot/dts/mt7623n.dtsi | 5 -----
 2 files changed, 7 deletions(-)

diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 4776f85d6d5b..ef583cfd3baf 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -564,7 +564,6 @@
 		clock-names = "jpgdec-smi",
 			      "jpgdec";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
 		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
 			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
 	};
@@ -577,7 +576,6 @@
 		clocks =  <&imgsys CLK_IMG_VENC>;
 		clock-names = "jpgenc";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
 		iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
 			 <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
 	};
diff --git a/arch/arm/boot/dts/mt7623n.dtsi b/arch/arm/boot/dts/mt7623n.dtsi
index bcb0846e29fd..3adab5cd1fef 100644
--- a/arch/arm/boot/dts/mt7623n.dtsi
+++ b/arch/arm/boot/dts/mt7623n.dtsi
@@ -121,7 +121,6 @@
 		clock-names = "jpgdec-smi",
 			      "jpgdec";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
 		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
 			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
 	};
@@ -144,7 +143,6 @@
 		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&mmsys CLK_MM_DISP_OVL>;
 		iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>;
-		mediatek,larb = <&larb0>;
 	};
 
 	rdma0: rdma@14008000 {
@@ -154,7 +152,6 @@
 		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&mmsys CLK_MM_DISP_RDMA>;
 		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>;
-		mediatek,larb = <&larb0>;
 	};
 
 	wdma@14009000 {
@@ -164,7 +161,6 @@
 		interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&mmsys CLK_MM_DISP_WDMA>;
 		iommus = <&iommu MT2701_M4U_PORT_DISP_WDMA>;
-		mediatek,larb = <&larb0>;
 	};
 
 	bls: pwm@1400a000 {
@@ -215,7 +211,6 @@
 		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&mmsys CLK_MM_DISP_RDMA1>;
 		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>;
-		mediatek,larb = <&larb0>;
 	};
 
 	dpi0: dpi@14014000 {
-- 
2.18.0

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 11/12] arm: dts: mediatek: Get rid of mediatek, larb for MM nodes
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich

After adding device_link between the IOMMU consumer and smi, the
mediatek,larb is unnecessary now.

CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 arch/arm/boot/dts/mt2701.dtsi  | 2 --
 arch/arm/boot/dts/mt7623n.dtsi | 5 -----
 2 files changed, 7 deletions(-)

diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 4776f85d6d5b..ef583cfd3baf 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -564,7 +564,6 @@
 		clock-names = "jpgdec-smi",
 			      "jpgdec";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
 		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
 			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
 	};
@@ -577,7 +576,6 @@
 		clocks =  <&imgsys CLK_IMG_VENC>;
 		clock-names = "jpgenc";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
 		iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
 			 <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
 	};
diff --git a/arch/arm/boot/dts/mt7623n.dtsi b/arch/arm/boot/dts/mt7623n.dtsi
index bcb0846e29fd..3adab5cd1fef 100644
--- a/arch/arm/boot/dts/mt7623n.dtsi
+++ b/arch/arm/boot/dts/mt7623n.dtsi
@@ -121,7 +121,6 @@
 		clock-names = "jpgdec-smi",
 			      "jpgdec";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
 		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
 			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
 	};
@@ -144,7 +143,6 @@
 		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&mmsys CLK_MM_DISP_OVL>;
 		iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>;
-		mediatek,larb = <&larb0>;
 	};
 
 	rdma0: rdma@14008000 {
@@ -154,7 +152,6 @@
 		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&mmsys CLK_MM_DISP_RDMA>;
 		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>;
-		mediatek,larb = <&larb0>;
 	};
 
 	wdma@14009000 {
@@ -164,7 +161,6 @@
 		interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&mmsys CLK_MM_DISP_WDMA>;
 		iommus = <&iommu MT2701_M4U_PORT_DISP_WDMA>;
-		mediatek,larb = <&larb0>;
 	};
 
 	bls: pwm@1400a000 {
@@ -215,7 +211,6 @@
 		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&mmsys CLK_MM_DISP_RDMA1>;
 		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>;
-		mediatek,larb = <&larb0>;
 	};
 
 	dpi0: dpi@14014000 {
-- 
2.18.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 11/12] arm: dts: mediatek: Get rid of mediatek, larb for MM nodes
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich

After adding device_link between the IOMMU consumer and smi, the
mediatek,larb is unnecessary now.

CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 arch/arm/boot/dts/mt2701.dtsi  | 2 --
 arch/arm/boot/dts/mt7623n.dtsi | 5 -----
 2 files changed, 7 deletions(-)

diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 4776f85d6d5b..ef583cfd3baf 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -564,7 +564,6 @@
 		clock-names = "jpgdec-smi",
 			      "jpgdec";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
 		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
 			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
 	};
@@ -577,7 +576,6 @@
 		clocks =  <&imgsys CLK_IMG_VENC>;
 		clock-names = "jpgenc";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
 		iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
 			 <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
 	};
diff --git a/arch/arm/boot/dts/mt7623n.dtsi b/arch/arm/boot/dts/mt7623n.dtsi
index bcb0846e29fd..3adab5cd1fef 100644
--- a/arch/arm/boot/dts/mt7623n.dtsi
+++ b/arch/arm/boot/dts/mt7623n.dtsi
@@ -121,7 +121,6 @@
 		clock-names = "jpgdec-smi",
 			      "jpgdec";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
 		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
 			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
 	};
@@ -144,7 +143,6 @@
 		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&mmsys CLK_MM_DISP_OVL>;
 		iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>;
-		mediatek,larb = <&larb0>;
 	};
 
 	rdma0: rdma@14008000 {
@@ -154,7 +152,6 @@
 		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&mmsys CLK_MM_DISP_RDMA>;
 		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>;
-		mediatek,larb = <&larb0>;
 	};
 
 	wdma@14009000 {
@@ -164,7 +161,6 @@
 		interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&mmsys CLK_MM_DISP_WDMA>;
 		iommus = <&iommu MT2701_M4U_PORT_DISP_WDMA>;
-		mediatek,larb = <&larb0>;
 	};
 
 	bls: pwm@1400a000 {
@@ -215,7 +211,6 @@
 		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&mmsys CLK_MM_DISP_RDMA1>;
 		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>;
-		mediatek,larb = <&larb0>;
 	};
 
 	dpi0: dpi@14014000 {
-- 
2.18.0


^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 11/12] arm: dts: mediatek: Get rid of mediatek, larb for MM nodes
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich

After adding device_link between the IOMMU consumer and smi, the
mediatek,larb is unnecessary now.

CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
---
 arch/arm/boot/dts/mt2701.dtsi  | 2 --
 arch/arm/boot/dts/mt7623n.dtsi | 5 -----
 2 files changed, 7 deletions(-)

diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 4776f85d6d5b..ef583cfd3baf 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -564,7 +564,6 @@
 		clock-names = "jpgdec-smi",
 			      "jpgdec";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
 		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
 			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
 	};
@@ -577,7 +576,6 @@
 		clocks =  <&imgsys CLK_IMG_VENC>;
 		clock-names = "jpgenc";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
 		iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
 			 <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
 	};
diff --git a/arch/arm/boot/dts/mt7623n.dtsi b/arch/arm/boot/dts/mt7623n.dtsi
index bcb0846e29fd..3adab5cd1fef 100644
--- a/arch/arm/boot/dts/mt7623n.dtsi
+++ b/arch/arm/boot/dts/mt7623n.dtsi
@@ -121,7 +121,6 @@
 		clock-names = "jpgdec-smi",
 			      "jpgdec";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
 		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
 			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
 	};
@@ -144,7 +143,6 @@
 		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&mmsys CLK_MM_DISP_OVL>;
 		iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>;
-		mediatek,larb = <&larb0>;
 	};
 
 	rdma0: rdma@14008000 {
@@ -154,7 +152,6 @@
 		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&mmsys CLK_MM_DISP_RDMA>;
 		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>;
-		mediatek,larb = <&larb0>;
 	};
 
 	wdma@14009000 {
@@ -164,7 +161,6 @@
 		interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&mmsys CLK_MM_DISP_WDMA>;
 		iommus = <&iommu MT2701_M4U_PORT_DISP_WDMA>;
-		mediatek,larb = <&larb0>;
 	};
 
 	bls: pwm@1400a000 {
@@ -215,7 +211,6 @@
 		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&mmsys CLK_MM_DISP_RDMA1>;
 		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>;
-		mediatek,larb = <&larb0>;
 	};
 
 	dpi0: dpi@14014000 {
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 12/12] arm64: dts: mediatek: Get rid of mediatek,larb for MM nodes
  2021-09-29  1:37 ` Yong Wu
                     ` (2 preceding siblings ...)
  (?)
@ 2021-09-29  1:37   ` Yong Wu
  -1 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich

After adding device_link between the IOMMU consumer and smi,
the mediatek,larb is unnecessary now.

CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
---
 arch/arm64/boot/dts/mediatek/mt8173.dtsi | 16 ----------------
 arch/arm64/boot/dts/mediatek/mt8183.dtsi |  6 ------
 2 files changed, 22 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index d9e005ae5bb0..205c221696a6 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -1009,7 +1009,6 @@
 				 <&mmsys CLK_MM_MUTEX_32K>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			iommus = <&iommu M4U_PORT_MDP_RDMA0>;
-			mediatek,larb = <&larb0>;
 			mediatek,vpu = <&vpu>;
 		};
 
@@ -1020,7 +1019,6 @@
 				 <&mmsys CLK_MM_MUTEX_32K>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			iommus = <&iommu M4U_PORT_MDP_RDMA1>;
-			mediatek,larb = <&larb4>;
 		};
 
 		mdp_rsz0: rsz@14003000 {
@@ -1050,7 +1048,6 @@
 			clocks = <&mmsys CLK_MM_MDP_WDMA>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			iommus = <&iommu M4U_PORT_MDP_WDMA>;
-			mediatek,larb = <&larb0>;
 		};
 
 		mdp_wrot0: wrot@14007000 {
@@ -1059,7 +1056,6 @@
 			clocks = <&mmsys CLK_MM_MDP_WROT0>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			iommus = <&iommu M4U_PORT_MDP_WROT0>;
-			mediatek,larb = <&larb0>;
 		};
 
 		mdp_wrot1: wrot@14008000 {
@@ -1068,7 +1064,6 @@
 			clocks = <&mmsys CLK_MM_MDP_WROT1>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			iommus = <&iommu M4U_PORT_MDP_WROT1>;
-			mediatek,larb = <&larb4>;
 		};
 
 		ovl0: ovl@1400c000 {
@@ -1078,7 +1073,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_OVL0>;
 			iommus = <&iommu M4U_PORT_DISP_OVL0>;
-			mediatek,larb = <&larb0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
 		};
 
@@ -1089,7 +1083,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_OVL1>;
 			iommus = <&iommu M4U_PORT_DISP_OVL1>;
-			mediatek,larb = <&larb4>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>;
 		};
 
@@ -1100,7 +1093,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_RDMA0>;
 			iommus = <&iommu M4U_PORT_DISP_RDMA0>;
-			mediatek,larb = <&larb0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
 		};
 
@@ -1111,7 +1103,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_RDMA1>;
 			iommus = <&iommu M4U_PORT_DISP_RDMA1>;
-			mediatek,larb = <&larb4>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
 		};
 
@@ -1122,7 +1113,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_RDMA2>;
 			iommus = <&iommu M4U_PORT_DISP_RDMA2>;
-			mediatek,larb = <&larb4>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>;
 		};
 
@@ -1133,7 +1123,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_WDMA0>;
 			iommus = <&iommu M4U_PORT_DISP_WDMA0>;
-			mediatek,larb = <&larb0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
 		};
 
@@ -1144,7 +1133,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_WDMA1>;
 			iommus = <&iommu M4U_PORT_DISP_WDMA1>;
-			mediatek,larb = <&larb4>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
 		};
 
@@ -1395,7 +1383,6 @@
 			      <0 0x16027800 0 0x800>,	/* VDEC_HWB */
 			      <0 0x16028400 0 0x400>;	/* VDEC_HWG */
 			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
-			mediatek,larb = <&larb1>;
 			iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
 				 <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
 				 <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
@@ -1463,7 +1450,6 @@
 			compatible = "mediatek,mt8173-vcodec-enc";
 			reg = <0 0x18002000 0 0x1000>;	/* VENC_SYS */
 			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
-			mediatek,larb = <&larb3>;
 			iommus = <&iommu M4U_PORT_VENC_RCPU>,
 				 <&iommu M4U_PORT_VENC_REC>,
 				 <&iommu M4U_PORT_VENC_BSDMA>,
@@ -1491,7 +1477,6 @@
 			clock-names = "jpgdec-smi",
 				      "jpgdec";
 			power-domains = <&spm MT8173_POWER_DOMAIN_VENC>;
-			mediatek,larb = <&larb3>;
 			iommus = <&iommu M4U_PORT_JPGDEC_WDMA>,
 				 <&iommu M4U_PORT_JPGDEC_BSDMA>;
 		};
@@ -1525,7 +1510,6 @@
 				 <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
 				 <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
 				 <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
-			mediatek,larb = <&larb5>;
 			mediatek,vpu = <&vpu>;
 			clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
 			clock-names = "venc_lt_sel";
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index bead8e486239..d214ff0f4f59 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -1239,7 +1239,6 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_OVL0>;
 			iommus = <&iommu M4U_PORT_DISP_OVL0>;
-			mediatek,larb = <&larb0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>;
 		};
 
@@ -1250,7 +1249,6 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
 			iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>;
-			mediatek,larb = <&larb0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
 		};
 
@@ -1261,7 +1259,6 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_OVL1_2L>;
 			iommus = <&iommu M4U_PORT_DISP_2L_OVL1_LARB0>;
-			mediatek,larb = <&larb0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>;
 		};
 
@@ -1272,7 +1269,6 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_RDMA0>;
 			iommus = <&iommu M4U_PORT_DISP_RDMA0>;
-			mediatek,larb = <&larb0>;
 			mediatek,rdma-fifo-size = <5120>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
 		};
@@ -1284,7 +1280,6 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_RDMA1>;
 			iommus = <&iommu M4U_PORT_DISP_RDMA1>;
-			mediatek,larb = <&larb0>;
 			mediatek,rdma-fifo-size = <2048>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
 		};
@@ -1441,7 +1436,6 @@
 			compatible = "mediatek,mt8183-jpgenc", "mediatek,mtk-jpgenc";
 			reg = <0 0x17030000 0 0x1000>;
 			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_LOW>;
-			mediatek,larb = <&larb4>;
 			iommus = <&iommu M4U_PORT_JPGENC_RDMA>,
 				 <&iommu M4U_PORT_JPGENC_BSDMA>;
 			power-domains = <&spm MT8183_POWER_DOMAIN_VENC>;
-- 
2.18.0


^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 12/12] arm64: dts: mediatek: Get rid of mediatek, larb for MM nodes
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Dafna Hirschfeld, Chun-Kuang Hu, Will Deacon, dri-devel,
	anthony.huang, youlin.pei, Evan Green, Eizan Miyamoto,
	Matthias Kaehlcke, linux-arm-kernel, linux-media, devicetree,
	Philipp Zabel, Frank Wunderlich, yi.kuo, linux-mediatek,
	Hsin-Yi Wang, Tiffany Lin, anan.sun, srv_heupstream, acourbot,
	linux-kernel, iommu, Daniel Vetter, Robin Murphy

After adding device_link between the IOMMU consumer and smi,
the mediatek,larb is unnecessary now.

CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
---
 arch/arm64/boot/dts/mediatek/mt8173.dtsi | 16 ----------------
 arch/arm64/boot/dts/mediatek/mt8183.dtsi |  6 ------
 2 files changed, 22 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index d9e005ae5bb0..205c221696a6 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -1009,7 +1009,6 @@
 				 <&mmsys CLK_MM_MUTEX_32K>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			iommus = <&iommu M4U_PORT_MDP_RDMA0>;
-			mediatek,larb = <&larb0>;
 			mediatek,vpu = <&vpu>;
 		};
 
@@ -1020,7 +1019,6 @@
 				 <&mmsys CLK_MM_MUTEX_32K>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			iommus = <&iommu M4U_PORT_MDP_RDMA1>;
-			mediatek,larb = <&larb4>;
 		};
 
 		mdp_rsz0: rsz@14003000 {
@@ -1050,7 +1048,6 @@
 			clocks = <&mmsys CLK_MM_MDP_WDMA>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			iommus = <&iommu M4U_PORT_MDP_WDMA>;
-			mediatek,larb = <&larb0>;
 		};
 
 		mdp_wrot0: wrot@14007000 {
@@ -1059,7 +1056,6 @@
 			clocks = <&mmsys CLK_MM_MDP_WROT0>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			iommus = <&iommu M4U_PORT_MDP_WROT0>;
-			mediatek,larb = <&larb0>;
 		};
 
 		mdp_wrot1: wrot@14008000 {
@@ -1068,7 +1064,6 @@
 			clocks = <&mmsys CLK_MM_MDP_WROT1>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			iommus = <&iommu M4U_PORT_MDP_WROT1>;
-			mediatek,larb = <&larb4>;
 		};
 
 		ovl0: ovl@1400c000 {
@@ -1078,7 +1073,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_OVL0>;
 			iommus = <&iommu M4U_PORT_DISP_OVL0>;
-			mediatek,larb = <&larb0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
 		};
 
@@ -1089,7 +1083,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_OVL1>;
 			iommus = <&iommu M4U_PORT_DISP_OVL1>;
-			mediatek,larb = <&larb4>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>;
 		};
 
@@ -1100,7 +1093,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_RDMA0>;
 			iommus = <&iommu M4U_PORT_DISP_RDMA0>;
-			mediatek,larb = <&larb0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
 		};
 
@@ -1111,7 +1103,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_RDMA1>;
 			iommus = <&iommu M4U_PORT_DISP_RDMA1>;
-			mediatek,larb = <&larb4>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
 		};
 
@@ -1122,7 +1113,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_RDMA2>;
 			iommus = <&iommu M4U_PORT_DISP_RDMA2>;
-			mediatek,larb = <&larb4>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>;
 		};
 
@@ -1133,7 +1123,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_WDMA0>;
 			iommus = <&iommu M4U_PORT_DISP_WDMA0>;
-			mediatek,larb = <&larb0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
 		};
 
@@ -1144,7 +1133,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_WDMA1>;
 			iommus = <&iommu M4U_PORT_DISP_WDMA1>;
-			mediatek,larb = <&larb4>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
 		};
 
@@ -1395,7 +1383,6 @@
 			      <0 0x16027800 0 0x800>,	/* VDEC_HWB */
 			      <0 0x16028400 0 0x400>;	/* VDEC_HWG */
 			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
-			mediatek,larb = <&larb1>;
 			iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
 				 <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
 				 <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
@@ -1463,7 +1450,6 @@
 			compatible = "mediatek,mt8173-vcodec-enc";
 			reg = <0 0x18002000 0 0x1000>;	/* VENC_SYS */
 			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
-			mediatek,larb = <&larb3>;
 			iommus = <&iommu M4U_PORT_VENC_RCPU>,
 				 <&iommu M4U_PORT_VENC_REC>,
 				 <&iommu M4U_PORT_VENC_BSDMA>,
@@ -1491,7 +1477,6 @@
 			clock-names = "jpgdec-smi",
 				      "jpgdec";
 			power-domains = <&spm MT8173_POWER_DOMAIN_VENC>;
-			mediatek,larb = <&larb3>;
 			iommus = <&iommu M4U_PORT_JPGDEC_WDMA>,
 				 <&iommu M4U_PORT_JPGDEC_BSDMA>;
 		};
@@ -1525,7 +1510,6 @@
 				 <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
 				 <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
 				 <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
-			mediatek,larb = <&larb5>;
 			mediatek,vpu = <&vpu>;
 			clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
 			clock-names = "venc_lt_sel";
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index bead8e486239..d214ff0f4f59 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -1239,7 +1239,6 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_OVL0>;
 			iommus = <&iommu M4U_PORT_DISP_OVL0>;
-			mediatek,larb = <&larb0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>;
 		};
 
@@ -1250,7 +1249,6 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
 			iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>;
-			mediatek,larb = <&larb0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
 		};
 
@@ -1261,7 +1259,6 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_OVL1_2L>;
 			iommus = <&iommu M4U_PORT_DISP_2L_OVL1_LARB0>;
-			mediatek,larb = <&larb0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>;
 		};
 
@@ -1272,7 +1269,6 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_RDMA0>;
 			iommus = <&iommu M4U_PORT_DISP_RDMA0>;
-			mediatek,larb = <&larb0>;
 			mediatek,rdma-fifo-size = <5120>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
 		};
@@ -1284,7 +1280,6 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_RDMA1>;
 			iommus = <&iommu M4U_PORT_DISP_RDMA1>;
-			mediatek,larb = <&larb0>;
 			mediatek,rdma-fifo-size = <2048>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
 		};
@@ -1441,7 +1436,6 @@
 			compatible = "mediatek,mt8183-jpgenc", "mediatek,mtk-jpgenc";
 			reg = <0 0x17030000 0 0x1000>;
 			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_LOW>;
-			mediatek,larb = <&larb4>;
 			iommus = <&iommu M4U_PORT_JPGENC_RDMA>,
 				 <&iommu M4U_PORT_JPGENC_BSDMA>;
 			power-domains = <&spm MT8183_POWER_DOMAIN_VENC>;
-- 
2.18.0

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 12/12] arm64: dts: mediatek: Get rid of mediatek, larb for MM nodes
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich

After adding device_link between the IOMMU consumer and smi,
the mediatek,larb is unnecessary now.

CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
---
 arch/arm64/boot/dts/mediatek/mt8173.dtsi | 16 ----------------
 arch/arm64/boot/dts/mediatek/mt8183.dtsi |  6 ------
 2 files changed, 22 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index d9e005ae5bb0..205c221696a6 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -1009,7 +1009,6 @@
 				 <&mmsys CLK_MM_MUTEX_32K>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			iommus = <&iommu M4U_PORT_MDP_RDMA0>;
-			mediatek,larb = <&larb0>;
 			mediatek,vpu = <&vpu>;
 		};
 
@@ -1020,7 +1019,6 @@
 				 <&mmsys CLK_MM_MUTEX_32K>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			iommus = <&iommu M4U_PORT_MDP_RDMA1>;
-			mediatek,larb = <&larb4>;
 		};
 
 		mdp_rsz0: rsz@14003000 {
@@ -1050,7 +1048,6 @@
 			clocks = <&mmsys CLK_MM_MDP_WDMA>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			iommus = <&iommu M4U_PORT_MDP_WDMA>;
-			mediatek,larb = <&larb0>;
 		};
 
 		mdp_wrot0: wrot@14007000 {
@@ -1059,7 +1056,6 @@
 			clocks = <&mmsys CLK_MM_MDP_WROT0>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			iommus = <&iommu M4U_PORT_MDP_WROT0>;
-			mediatek,larb = <&larb0>;
 		};
 
 		mdp_wrot1: wrot@14008000 {
@@ -1068,7 +1064,6 @@
 			clocks = <&mmsys CLK_MM_MDP_WROT1>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			iommus = <&iommu M4U_PORT_MDP_WROT1>;
-			mediatek,larb = <&larb4>;
 		};
 
 		ovl0: ovl@1400c000 {
@@ -1078,7 +1073,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_OVL0>;
 			iommus = <&iommu M4U_PORT_DISP_OVL0>;
-			mediatek,larb = <&larb0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
 		};
 
@@ -1089,7 +1083,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_OVL1>;
 			iommus = <&iommu M4U_PORT_DISP_OVL1>;
-			mediatek,larb = <&larb4>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>;
 		};
 
@@ -1100,7 +1093,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_RDMA0>;
 			iommus = <&iommu M4U_PORT_DISP_RDMA0>;
-			mediatek,larb = <&larb0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
 		};
 
@@ -1111,7 +1103,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_RDMA1>;
 			iommus = <&iommu M4U_PORT_DISP_RDMA1>;
-			mediatek,larb = <&larb4>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
 		};
 
@@ -1122,7 +1113,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_RDMA2>;
 			iommus = <&iommu M4U_PORT_DISP_RDMA2>;
-			mediatek,larb = <&larb4>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>;
 		};
 
@@ -1133,7 +1123,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_WDMA0>;
 			iommus = <&iommu M4U_PORT_DISP_WDMA0>;
-			mediatek,larb = <&larb0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
 		};
 
@@ -1144,7 +1133,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_WDMA1>;
 			iommus = <&iommu M4U_PORT_DISP_WDMA1>;
-			mediatek,larb = <&larb4>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
 		};
 
@@ -1395,7 +1383,6 @@
 			      <0 0x16027800 0 0x800>,	/* VDEC_HWB */
 			      <0 0x16028400 0 0x400>;	/* VDEC_HWG */
 			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
-			mediatek,larb = <&larb1>;
 			iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
 				 <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
 				 <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
@@ -1463,7 +1450,6 @@
 			compatible = "mediatek,mt8173-vcodec-enc";
 			reg = <0 0x18002000 0 0x1000>;	/* VENC_SYS */
 			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
-			mediatek,larb = <&larb3>;
 			iommus = <&iommu M4U_PORT_VENC_RCPU>,
 				 <&iommu M4U_PORT_VENC_REC>,
 				 <&iommu M4U_PORT_VENC_BSDMA>,
@@ -1491,7 +1477,6 @@
 			clock-names = "jpgdec-smi",
 				      "jpgdec";
 			power-domains = <&spm MT8173_POWER_DOMAIN_VENC>;
-			mediatek,larb = <&larb3>;
 			iommus = <&iommu M4U_PORT_JPGDEC_WDMA>,
 				 <&iommu M4U_PORT_JPGDEC_BSDMA>;
 		};
@@ -1525,7 +1510,6 @@
 				 <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
 				 <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
 				 <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
-			mediatek,larb = <&larb5>;
 			mediatek,vpu = <&vpu>;
 			clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
 			clock-names = "venc_lt_sel";
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index bead8e486239..d214ff0f4f59 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -1239,7 +1239,6 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_OVL0>;
 			iommus = <&iommu M4U_PORT_DISP_OVL0>;
-			mediatek,larb = <&larb0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>;
 		};
 
@@ -1250,7 +1249,6 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
 			iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>;
-			mediatek,larb = <&larb0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
 		};
 
@@ -1261,7 +1259,6 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_OVL1_2L>;
 			iommus = <&iommu M4U_PORT_DISP_2L_OVL1_LARB0>;
-			mediatek,larb = <&larb0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>;
 		};
 
@@ -1272,7 +1269,6 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_RDMA0>;
 			iommus = <&iommu M4U_PORT_DISP_RDMA0>;
-			mediatek,larb = <&larb0>;
 			mediatek,rdma-fifo-size = <5120>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
 		};
@@ -1284,7 +1280,6 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_RDMA1>;
 			iommus = <&iommu M4U_PORT_DISP_RDMA1>;
-			mediatek,larb = <&larb0>;
 			mediatek,rdma-fifo-size = <2048>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
 		};
@@ -1441,7 +1436,6 @@
 			compatible = "mediatek,mt8183-jpgenc", "mediatek,mtk-jpgenc";
 			reg = <0 0x17030000 0 0x1000>;
 			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_LOW>;
-			mediatek,larb = <&larb4>;
 			iommus = <&iommu M4U_PORT_JPGENC_RDMA>,
 				 <&iommu M4U_PORT_JPGENC_BSDMA>;
 			power-domains = <&spm MT8183_POWER_DOMAIN_VENC>;
-- 
2.18.0


^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 12/12] arm64: dts: mediatek: Get rid of mediatek, larb for MM nodes
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich

After adding device_link between the IOMMU consumer and smi,
the mediatek,larb is unnecessary now.

CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
---
 arch/arm64/boot/dts/mediatek/mt8173.dtsi | 16 ----------------
 arch/arm64/boot/dts/mediatek/mt8183.dtsi |  6 ------
 2 files changed, 22 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index d9e005ae5bb0..205c221696a6 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -1009,7 +1009,6 @@
 				 <&mmsys CLK_MM_MUTEX_32K>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			iommus = <&iommu M4U_PORT_MDP_RDMA0>;
-			mediatek,larb = <&larb0>;
 			mediatek,vpu = <&vpu>;
 		};
 
@@ -1020,7 +1019,6 @@
 				 <&mmsys CLK_MM_MUTEX_32K>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			iommus = <&iommu M4U_PORT_MDP_RDMA1>;
-			mediatek,larb = <&larb4>;
 		};
 
 		mdp_rsz0: rsz@14003000 {
@@ -1050,7 +1048,6 @@
 			clocks = <&mmsys CLK_MM_MDP_WDMA>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			iommus = <&iommu M4U_PORT_MDP_WDMA>;
-			mediatek,larb = <&larb0>;
 		};
 
 		mdp_wrot0: wrot@14007000 {
@@ -1059,7 +1056,6 @@
 			clocks = <&mmsys CLK_MM_MDP_WROT0>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			iommus = <&iommu M4U_PORT_MDP_WROT0>;
-			mediatek,larb = <&larb0>;
 		};
 
 		mdp_wrot1: wrot@14008000 {
@@ -1068,7 +1064,6 @@
 			clocks = <&mmsys CLK_MM_MDP_WROT1>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			iommus = <&iommu M4U_PORT_MDP_WROT1>;
-			mediatek,larb = <&larb4>;
 		};
 
 		ovl0: ovl@1400c000 {
@@ -1078,7 +1073,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_OVL0>;
 			iommus = <&iommu M4U_PORT_DISP_OVL0>;
-			mediatek,larb = <&larb0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
 		};
 
@@ -1089,7 +1083,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_OVL1>;
 			iommus = <&iommu M4U_PORT_DISP_OVL1>;
-			mediatek,larb = <&larb4>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>;
 		};
 
@@ -1100,7 +1093,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_RDMA0>;
 			iommus = <&iommu M4U_PORT_DISP_RDMA0>;
-			mediatek,larb = <&larb0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
 		};
 
@@ -1111,7 +1103,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_RDMA1>;
 			iommus = <&iommu M4U_PORT_DISP_RDMA1>;
-			mediatek,larb = <&larb4>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
 		};
 
@@ -1122,7 +1113,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_RDMA2>;
 			iommus = <&iommu M4U_PORT_DISP_RDMA2>;
-			mediatek,larb = <&larb4>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>;
 		};
 
@@ -1133,7 +1123,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_WDMA0>;
 			iommus = <&iommu M4U_PORT_DISP_WDMA0>;
-			mediatek,larb = <&larb0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
 		};
 
@@ -1144,7 +1133,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_WDMA1>;
 			iommus = <&iommu M4U_PORT_DISP_WDMA1>;
-			mediatek,larb = <&larb4>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
 		};
 
@@ -1395,7 +1383,6 @@
 			      <0 0x16027800 0 0x800>,	/* VDEC_HWB */
 			      <0 0x16028400 0 0x400>;	/* VDEC_HWG */
 			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
-			mediatek,larb = <&larb1>;
 			iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
 				 <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
 				 <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
@@ -1463,7 +1450,6 @@
 			compatible = "mediatek,mt8173-vcodec-enc";
 			reg = <0 0x18002000 0 0x1000>;	/* VENC_SYS */
 			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
-			mediatek,larb = <&larb3>;
 			iommus = <&iommu M4U_PORT_VENC_RCPU>,
 				 <&iommu M4U_PORT_VENC_REC>,
 				 <&iommu M4U_PORT_VENC_BSDMA>,
@@ -1491,7 +1477,6 @@
 			clock-names = "jpgdec-smi",
 				      "jpgdec";
 			power-domains = <&spm MT8173_POWER_DOMAIN_VENC>;
-			mediatek,larb = <&larb3>;
 			iommus = <&iommu M4U_PORT_JPGDEC_WDMA>,
 				 <&iommu M4U_PORT_JPGDEC_BSDMA>;
 		};
@@ -1525,7 +1510,6 @@
 				 <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
 				 <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
 				 <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
-			mediatek,larb = <&larb5>;
 			mediatek,vpu = <&vpu>;
 			clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
 			clock-names = "venc_lt_sel";
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index bead8e486239..d214ff0f4f59 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -1239,7 +1239,6 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_OVL0>;
 			iommus = <&iommu M4U_PORT_DISP_OVL0>;
-			mediatek,larb = <&larb0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>;
 		};
 
@@ -1250,7 +1249,6 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
 			iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>;
-			mediatek,larb = <&larb0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
 		};
 
@@ -1261,7 +1259,6 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_OVL1_2L>;
 			iommus = <&iommu M4U_PORT_DISP_2L_OVL1_LARB0>;
-			mediatek,larb = <&larb0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>;
 		};
 
@@ -1272,7 +1269,6 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_RDMA0>;
 			iommus = <&iommu M4U_PORT_DISP_RDMA0>;
-			mediatek,larb = <&larb0>;
 			mediatek,rdma-fifo-size = <5120>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
 		};
@@ -1284,7 +1280,6 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_RDMA1>;
 			iommus = <&iommu M4U_PORT_DISP_RDMA1>;
-			mediatek,larb = <&larb0>;
 			mediatek,rdma-fifo-size = <2048>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
 		};
@@ -1441,7 +1436,6 @@
 			compatible = "mediatek,mt8183-jpgenc", "mediatek,mtk-jpgenc";
 			reg = <0 0x17030000 0 0x1000>;
 			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_LOW>;
-			mediatek,larb = <&larb4>;
 			iommus = <&iommu M4U_PORT_JPGENC_RDMA>,
 				 <&iommu M4U_PORT_JPGENC_BSDMA>;
 			power-domains = <&spm MT8183_POWER_DOMAIN_VENC>;
-- 
2.18.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 105+ messages in thread

* [PATCH v8 12/12] arm64: dts: mediatek: Get rid of mediatek, larb for MM nodes
@ 2021-09-29  1:37   ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-29  1:37 UTC (permalink / raw)
  To: Matthias Brugger, Joerg Roedel, Rob Herring, Krzysztof Kozlowski,
	David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, yong.wu, youlin.pei, Matthias Kaehlcke,
	anan.sun, yi.kuo, acourbot, linux-media, dri-devel,
	Daniel Vetter, Chun-Kuang Hu, Philipp Zabel, Tiffany Lin,
	Dafna Hirschfeld, Hsin-Yi Wang, Eizan Miyamoto, anthony.huang,
	Frank Wunderlich

After adding device_link between the IOMMU consumer and smi,
the mediatek,larb is unnecessary now.

CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
---
 arch/arm64/boot/dts/mediatek/mt8173.dtsi | 16 ----------------
 arch/arm64/boot/dts/mediatek/mt8183.dtsi |  6 ------
 2 files changed, 22 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index d9e005ae5bb0..205c221696a6 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -1009,7 +1009,6 @@
 				 <&mmsys CLK_MM_MUTEX_32K>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			iommus = <&iommu M4U_PORT_MDP_RDMA0>;
-			mediatek,larb = <&larb0>;
 			mediatek,vpu = <&vpu>;
 		};
 
@@ -1020,7 +1019,6 @@
 				 <&mmsys CLK_MM_MUTEX_32K>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			iommus = <&iommu M4U_PORT_MDP_RDMA1>;
-			mediatek,larb = <&larb4>;
 		};
 
 		mdp_rsz0: rsz@14003000 {
@@ -1050,7 +1048,6 @@
 			clocks = <&mmsys CLK_MM_MDP_WDMA>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			iommus = <&iommu M4U_PORT_MDP_WDMA>;
-			mediatek,larb = <&larb0>;
 		};
 
 		mdp_wrot0: wrot@14007000 {
@@ -1059,7 +1056,6 @@
 			clocks = <&mmsys CLK_MM_MDP_WROT0>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			iommus = <&iommu M4U_PORT_MDP_WROT0>;
-			mediatek,larb = <&larb0>;
 		};
 
 		mdp_wrot1: wrot@14008000 {
@@ -1068,7 +1064,6 @@
 			clocks = <&mmsys CLK_MM_MDP_WROT1>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			iommus = <&iommu M4U_PORT_MDP_WROT1>;
-			mediatek,larb = <&larb4>;
 		};
 
 		ovl0: ovl@1400c000 {
@@ -1078,7 +1073,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_OVL0>;
 			iommus = <&iommu M4U_PORT_DISP_OVL0>;
-			mediatek,larb = <&larb0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
 		};
 
@@ -1089,7 +1083,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_OVL1>;
 			iommus = <&iommu M4U_PORT_DISP_OVL1>;
-			mediatek,larb = <&larb4>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>;
 		};
 
@@ -1100,7 +1093,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_RDMA0>;
 			iommus = <&iommu M4U_PORT_DISP_RDMA0>;
-			mediatek,larb = <&larb0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
 		};
 
@@ -1111,7 +1103,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_RDMA1>;
 			iommus = <&iommu M4U_PORT_DISP_RDMA1>;
-			mediatek,larb = <&larb4>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
 		};
 
@@ -1122,7 +1113,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_RDMA2>;
 			iommus = <&iommu M4U_PORT_DISP_RDMA2>;
-			mediatek,larb = <&larb4>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>;
 		};
 
@@ -1133,7 +1123,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_WDMA0>;
 			iommus = <&iommu M4U_PORT_DISP_WDMA0>;
-			mediatek,larb = <&larb0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
 		};
 
@@ -1144,7 +1133,6 @@
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_WDMA1>;
 			iommus = <&iommu M4U_PORT_DISP_WDMA1>;
-			mediatek,larb = <&larb4>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
 		};
 
@@ -1395,7 +1383,6 @@
 			      <0 0x16027800 0 0x800>,	/* VDEC_HWB */
 			      <0 0x16028400 0 0x400>;	/* VDEC_HWG */
 			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
-			mediatek,larb = <&larb1>;
 			iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
 				 <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
 				 <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
@@ -1463,7 +1450,6 @@
 			compatible = "mediatek,mt8173-vcodec-enc";
 			reg = <0 0x18002000 0 0x1000>;	/* VENC_SYS */
 			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
-			mediatek,larb = <&larb3>;
 			iommus = <&iommu M4U_PORT_VENC_RCPU>,
 				 <&iommu M4U_PORT_VENC_REC>,
 				 <&iommu M4U_PORT_VENC_BSDMA>,
@@ -1491,7 +1477,6 @@
 			clock-names = "jpgdec-smi",
 				      "jpgdec";
 			power-domains = <&spm MT8173_POWER_DOMAIN_VENC>;
-			mediatek,larb = <&larb3>;
 			iommus = <&iommu M4U_PORT_JPGDEC_WDMA>,
 				 <&iommu M4U_PORT_JPGDEC_BSDMA>;
 		};
@@ -1525,7 +1510,6 @@
 				 <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
 				 <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
 				 <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
-			mediatek,larb = <&larb5>;
 			mediatek,vpu = <&vpu>;
 			clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
 			clock-names = "venc_lt_sel";
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index bead8e486239..d214ff0f4f59 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -1239,7 +1239,6 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_OVL0>;
 			iommus = <&iommu M4U_PORT_DISP_OVL0>;
-			mediatek,larb = <&larb0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>;
 		};
 
@@ -1250,7 +1249,6 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
 			iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>;
-			mediatek,larb = <&larb0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
 		};
 
@@ -1261,7 +1259,6 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_OVL1_2L>;
 			iommus = <&iommu M4U_PORT_DISP_2L_OVL1_LARB0>;
-			mediatek,larb = <&larb0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>;
 		};
 
@@ -1272,7 +1269,6 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_RDMA0>;
 			iommus = <&iommu M4U_PORT_DISP_RDMA0>;
-			mediatek,larb = <&larb0>;
 			mediatek,rdma-fifo-size = <5120>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
 		};
@@ -1284,7 +1280,6 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_RDMA1>;
 			iommus = <&iommu M4U_PORT_DISP_RDMA1>;
-			mediatek,larb = <&larb0>;
 			mediatek,rdma-fifo-size = <2048>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
 		};
@@ -1441,7 +1436,6 @@
 			compatible = "mediatek,mt8183-jpgenc", "mediatek,mtk-jpgenc";
 			reg = <0 0x17030000 0 0x1000>;
 			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_LOW>;
-			mediatek,larb = <&larb4>;
 			iommus = <&iommu M4U_PORT_JPGENC_RDMA>,
 				 <&iommu M4U_PORT_JPGENC_BSDMA>;
 			power-domains = <&spm MT8183_POWER_DOMAIN_VENC>;
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 09/12] media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
  2021-09-29  1:37   ` Yong Wu
  (?)
  (?)
@ 2021-09-29 12:13     ` Dafna Hirschfeld
  -1 siblings, 0 replies; 105+ messages in thread
From: Dafna Hirschfeld @ 2021-09-29 12:13 UTC (permalink / raw)
  To: Yong Wu, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, youlin.pei, Matthias Kaehlcke, anan.sun,
	yi.kuo, acourbot, linux-media, dri-devel, Daniel Vetter,
	Chun-Kuang Hu, Philipp Zabel, Tiffany Lin, Hsin-Yi Wang,
	Eizan Miyamoto, anthony.huang, Frank Wunderlich, Irui Wang



On 29.09.21 03:37, Yong Wu wrote:
> MediaTek IOMMU has already added the device_link between the consumer
> and smi-larb device. If the vcodec device call the pm_runtime_get_sync,
> the smi-larb's pm_runtime_get_sync also be called automatically.
> 
> CC: Tiffany Lin <tiffany.lin@mediatek.com>
> CC: Irui Wang <irui.wang@mediatek.com>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> Reviewed-by: Evan Green <evgreen@chromium.org>
> Acked-by: Tiffany Lin <tiffany.lin@mediatek.com>
> Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
> ---
>   .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c   | 37 +++-------------
>   .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  3 --
>   .../platform/mtk-vcodec/mtk_vcodec_enc.c      |  1 -
>   .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c   | 44 +++----------------
>   4 files changed, 10 insertions(+), 75 deletions(-)
> 
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> index 6038db96f71c..d0bf9aa3b29d 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> @@ -8,14 +8,12 @@
>   #include <linux/of_address.h>
>   #include <linux/of_platform.h>
>   #include <linux/pm_runtime.h>
> -#include <soc/mediatek/smi.h>
>   
>   #include "mtk_vcodec_dec_pm.h"
>   #include "mtk_vcodec_util.h"
>   
>   int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
>   {
> -	struct device_node *node;
>   	struct platform_device *pdev;
>   	struct mtk_vcodec_pm *pm;
>   	struct mtk_vcodec_clk *dec_clk;
> @@ -26,18 +24,7 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
>   	pm = &mtkdev->pm;
>   	pm->mtkdev = mtkdev;
>   	dec_clk = &pm->vdec_clk;
> -	node = of_parse_phandle(pdev->dev.of_node, "mediatek,larb", 0);
> -	if (!node) {
> -		mtk_v4l2_err("of_parse_phandle mediatek,larb fail!");
> -		return -1;
> -	}
>   
> -	pdev = of_find_device_by_node(node);
> -	of_node_put(node);
> -	if (WARN_ON(!pdev)) {
> -		return -1;
> -	}
> -	pm->larbvdec = &pdev->dev;
>   	pdev = mtkdev->plat_dev;
>   	pm->dev = &pdev->dev;
>   
> @@ -47,14 +34,11 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
>   		dec_clk->clk_info = devm_kcalloc(&pdev->dev,
>   			dec_clk->clk_num, sizeof(*clk_info),
>   			GFP_KERNEL);
> -		if (!dec_clk->clk_info) {
> -			ret = -ENOMEM;
> -			goto put_device;
> -		}
> +		if (!dec_clk->clk_info)
> +			return -ENOMEM;
>   	} else {
>   		mtk_v4l2_err("Failed to get vdec clock count");
> -		ret = -EINVAL;
> -		goto put_device;
> +		return -EINVAL;
>   	}
>   
>   	for (i = 0; i < dec_clk->clk_num; i++) {
> @@ -63,29 +47,24 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
>   			"clock-names", i, &clk_info->clk_name);
>   		if (ret) {
>   			mtk_v4l2_err("Failed to get clock name id = %d", i);
> -			goto put_device;
> +			return ret;
>   		}
>   		clk_info->vcodec_clk = devm_clk_get(&pdev->dev,
>   			clk_info->clk_name);
>   		if (IS_ERR(clk_info->vcodec_clk)) {
>   			mtk_v4l2_err("devm_clk_get (%d)%s fail", i,
>   				clk_info->clk_name);
> -			ret = PTR_ERR(clk_info->vcodec_clk);
> -			goto put_device;
> +			return PTR_ERR(clk_info->vcodec_clk);
>   		}
>   	}
>   
>   	pm_runtime_enable(&pdev->dev);
>   	return 0;
> -put_device:
> -	put_device(pm->larbvdec);
> -	return ret;
>   }
>   
>   void mtk_vcodec_release_dec_pm(struct mtk_vcodec_dev *dev)
>   {
>   	pm_runtime_disable(dev->pm.dev);
> -	put_device(dev->pm.larbvdec);
>   }

Now that functions only do  'pm_runtime_disable(dev->pm.dev);' so it will be more
readable to remove the function mtk_vcodec_release_dec_pm
and replace with pm_runtime_disable(dev->pm.dev);
Same for the 'enc' equivalent.

Thanks,
Dafna

>   
>   int mtk_vcodec_dec_pw_on(struct mtk_vcodec_pm *pm)
> @@ -122,11 +101,6 @@ void mtk_vcodec_dec_clock_on(struct mtk_vcodec_pm *pm)
>   		}
>   	}
>   
> -	ret = mtk_smi_larb_get(pm->larbvdec);
> -	if (ret) {
> -		mtk_v4l2_err("mtk_smi_larb_get larbvdec fail %d", ret);
> -		goto error;
> -	}>   	return;
>   
>   error:
> @@ -139,7 +113,6 @@ void mtk_vcodec_dec_clock_off(struct mtk_vcodec_pm *pm)
>   	struct mtk_vcodec_clk *dec_clk = &pm->vdec_clk;
>   	int i = 0;
>   
> -	mtk_smi_larb_put(pm->larbvdec);
>   	for (i = dec_clk->clk_num - 1; i >= 0; i--)
>   		clk_disable_unprepare(dec_clk->clk_info[i].vcodec_clk);
>   }
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> index c6c7672fecfb..64b73dd880ce 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> @@ -189,10 +189,7 @@ struct mtk_vcodec_clk {
>    */
>   struct mtk_vcodec_pm {
>   	struct mtk_vcodec_clk	vdec_clk;
> -	struct device	*larbvdec;
> -
>   	struct mtk_vcodec_clk	venc_clk;
> -	struct device	*larbvenc;
>   	struct device	*dev;
>   	struct mtk_vcodec_dev	*mtkdev;
>   };
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
> index 416f356af363..9a1515cf862d 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
> @@ -8,7 +8,6 @@
>   #include <media/v4l2-event.h>
>   #include <media/v4l2-mem2mem.h>
>   #include <media/videobuf2-dma-contig.h>
> -#include <soc/mediatek/smi.h>
>   #include <linux/pm_runtime.h>
>   
>   #include "mtk_vcodec_drv.h"
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
> index 1b2e4930ed27..dffb190267ed 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
> @@ -8,58 +8,36 @@
>   #include <linux/of_address.h>
>   #include <linux/of_platform.h>
>   #include <linux/pm_runtime.h>
> -#include <soc/mediatek/smi.h>
>   
>   #include "mtk_vcodec_enc_pm.h"
>   #include "mtk_vcodec_util.h"
>   
>   int mtk_vcodec_init_enc_pm(struct mtk_vcodec_dev *mtkdev)
>   {
> -	struct device_node *node;
>   	struct platform_device *pdev;
>   	struct mtk_vcodec_pm *pm;
>   	struct mtk_vcodec_clk *enc_clk;
>   	struct mtk_vcodec_clk_info *clk_info;
>   	int ret = 0, i = 0;
> -	struct device *dev;
>   
>   	pdev = mtkdev->plat_dev;
>   	pm = &mtkdev->pm;
>   	memset(pm, 0, sizeof(struct mtk_vcodec_pm));
>   	pm->mtkdev = mtkdev;
>   	pm->dev = &pdev->dev;
> -	dev = &pdev->dev;
>   	enc_clk = &pm->venc_clk;
>   
> -	node = of_parse_phandle(dev->of_node, "mediatek,larb", 0);
> -	if (!node) {
> -		mtk_v4l2_err("no mediatek,larb found");
> -		return -ENODEV;
> -	}
> -	pdev = of_find_device_by_node(node);
> -	of_node_put(node);
> -	if (!pdev) {
> -		mtk_v4l2_err("no mediatek,larb device found");
> -		return -ENODEV;
> -	}
> -	pm->larbvenc = &pdev->dev;
> -	pdev = mtkdev->plat_dev;
> -	pm->dev = &pdev->dev;
> -
>   	enc_clk->clk_num = of_property_count_strings(pdev->dev.of_node,
>   		"clock-names");
>   	if (enc_clk->clk_num > 0) {
>   		enc_clk->clk_info = devm_kcalloc(&pdev->dev,
>   			enc_clk->clk_num, sizeof(*clk_info),
>   			GFP_KERNEL);
> -		if (!enc_clk->clk_info) {
> -			ret = -ENOMEM;
> -			goto put_larbvenc;
> -		}
> +		if (!enc_clk->clk_info)
> +			return -ENOMEM;
>   	} else {
>   		mtk_v4l2_err("Failed to get venc clock count");
> -		ret = -EINVAL;
> -		goto put_larbvenc;
> +		return -EINVAL;
>   	}
>   
>   	for (i = 0; i < enc_clk->clk_num; i++) {
> @@ -68,29 +46,23 @@ int mtk_vcodec_init_enc_pm(struct mtk_vcodec_dev *mtkdev)
>   			"clock-names", i, &clk_info->clk_name);
>   		if (ret) {
>   			mtk_v4l2_err("venc failed to get clk name %d", i);
> -			goto put_larbvenc;
> +			return ret;
>   		}
>   		clk_info->vcodec_clk = devm_clk_get(&pdev->dev,
>   			clk_info->clk_name);
>   		if (IS_ERR(clk_info->vcodec_clk)) {
>   			mtk_v4l2_err("venc devm_clk_get (%d)%s fail", i,
>   				clk_info->clk_name);
> -			ret = PTR_ERR(clk_info->vcodec_clk);
> -			goto put_larbvenc;
> +			return PTR_ERR(clk_info->vcodec_clk);
>   		}
>   	}
>   
>   	return 0;
> -
> -put_larbvenc:
> -	put_device(pm->larbvenc);
> -	return ret;
>   }
>   
>   void mtk_vcodec_release_enc_pm(struct mtk_vcodec_dev *mtkdev)
>   {
>   	pm_runtime_disable(mtkdev->pm.dev);
> -	put_device(mtkdev->pm.larbvenc);
>   }
>   
>   
> @@ -108,11 +80,6 @@ void mtk_vcodec_enc_clock_on(struct mtk_vcodec_pm *pm)
>   		}
>   	}
>   
> -	ret = mtk_smi_larb_get(pm->larbvenc);
> -	if (ret) {
> -		mtk_v4l2_err("mtk_smi_larb_get larb3 fail %d", ret);
> -		goto clkerr;
> -	}
>   	return;
>   
>   clkerr:
> @@ -125,7 +92,6 @@ void mtk_vcodec_enc_clock_off(struct mtk_vcodec_pm *pm)
>   	struct mtk_vcodec_clk *enc_clk = &pm->venc_clk;
>   	int i = 0;
>   
> -	mtk_smi_larb_put(pm->larbvenc);
>   	for (i = enc_clk->clk_num - 1; i >= 0; i--)
>   		clk_disable_unprepare(enc_clk->clk_info[i].vcodec_clk);
>   }
> 

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 09/12] media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
@ 2021-09-29 12:13     ` Dafna Hirschfeld
  0 siblings, 0 replies; 105+ messages in thread
From: Dafna Hirschfeld @ 2021-09-29 12:13 UTC (permalink / raw)
  To: Yong Wu, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Chun-Kuang Hu, Will Deacon, dri-devel, anthony.huang, youlin.pei,
	Irui Wang, Evan Green, Eizan Miyamoto, Matthias Kaehlcke,
	linux-media, devicetree, Philipp Zabel, Frank Wunderlich, yi.kuo,
	linux-mediatek, Hsin-Yi Wang, Tiffany Lin, linux-arm-kernel,
	anan.sun, srv_heupstream, acourbot, linux-kernel, iommu,
	Daniel Vetter, Robin Murphy



On 29.09.21 03:37, Yong Wu wrote:
> MediaTek IOMMU has already added the device_link between the consumer
> and smi-larb device. If the vcodec device call the pm_runtime_get_sync,
> the smi-larb's pm_runtime_get_sync also be called automatically.
> 
> CC: Tiffany Lin <tiffany.lin@mediatek.com>
> CC: Irui Wang <irui.wang@mediatek.com>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> Reviewed-by: Evan Green <evgreen@chromium.org>
> Acked-by: Tiffany Lin <tiffany.lin@mediatek.com>
> Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
> ---
>   .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c   | 37 +++-------------
>   .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  3 --
>   .../platform/mtk-vcodec/mtk_vcodec_enc.c      |  1 -
>   .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c   | 44 +++----------------
>   4 files changed, 10 insertions(+), 75 deletions(-)
> 
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> index 6038db96f71c..d0bf9aa3b29d 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> @@ -8,14 +8,12 @@
>   #include <linux/of_address.h>
>   #include <linux/of_platform.h>
>   #include <linux/pm_runtime.h>
> -#include <soc/mediatek/smi.h>
>   
>   #include "mtk_vcodec_dec_pm.h"
>   #include "mtk_vcodec_util.h"
>   
>   int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
>   {
> -	struct device_node *node;
>   	struct platform_device *pdev;
>   	struct mtk_vcodec_pm *pm;
>   	struct mtk_vcodec_clk *dec_clk;
> @@ -26,18 +24,7 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
>   	pm = &mtkdev->pm;
>   	pm->mtkdev = mtkdev;
>   	dec_clk = &pm->vdec_clk;
> -	node = of_parse_phandle(pdev->dev.of_node, "mediatek,larb", 0);
> -	if (!node) {
> -		mtk_v4l2_err("of_parse_phandle mediatek,larb fail!");
> -		return -1;
> -	}
>   
> -	pdev = of_find_device_by_node(node);
> -	of_node_put(node);
> -	if (WARN_ON(!pdev)) {
> -		return -1;
> -	}
> -	pm->larbvdec = &pdev->dev;
>   	pdev = mtkdev->plat_dev;
>   	pm->dev = &pdev->dev;
>   
> @@ -47,14 +34,11 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
>   		dec_clk->clk_info = devm_kcalloc(&pdev->dev,
>   			dec_clk->clk_num, sizeof(*clk_info),
>   			GFP_KERNEL);
> -		if (!dec_clk->clk_info) {
> -			ret = -ENOMEM;
> -			goto put_device;
> -		}
> +		if (!dec_clk->clk_info)
> +			return -ENOMEM;
>   	} else {
>   		mtk_v4l2_err("Failed to get vdec clock count");
> -		ret = -EINVAL;
> -		goto put_device;
> +		return -EINVAL;
>   	}
>   
>   	for (i = 0; i < dec_clk->clk_num; i++) {
> @@ -63,29 +47,24 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
>   			"clock-names", i, &clk_info->clk_name);
>   		if (ret) {
>   			mtk_v4l2_err("Failed to get clock name id = %d", i);
> -			goto put_device;
> +			return ret;
>   		}
>   		clk_info->vcodec_clk = devm_clk_get(&pdev->dev,
>   			clk_info->clk_name);
>   		if (IS_ERR(clk_info->vcodec_clk)) {
>   			mtk_v4l2_err("devm_clk_get (%d)%s fail", i,
>   				clk_info->clk_name);
> -			ret = PTR_ERR(clk_info->vcodec_clk);
> -			goto put_device;
> +			return PTR_ERR(clk_info->vcodec_clk);
>   		}
>   	}
>   
>   	pm_runtime_enable(&pdev->dev);
>   	return 0;
> -put_device:
> -	put_device(pm->larbvdec);
> -	return ret;
>   }
>   
>   void mtk_vcodec_release_dec_pm(struct mtk_vcodec_dev *dev)
>   {
>   	pm_runtime_disable(dev->pm.dev);
> -	put_device(dev->pm.larbvdec);
>   }

Now that functions only do  'pm_runtime_disable(dev->pm.dev);' so it will be more
readable to remove the function mtk_vcodec_release_dec_pm
and replace with pm_runtime_disable(dev->pm.dev);
Same for the 'enc' equivalent.

Thanks,
Dafna

>   
>   int mtk_vcodec_dec_pw_on(struct mtk_vcodec_pm *pm)
> @@ -122,11 +101,6 @@ void mtk_vcodec_dec_clock_on(struct mtk_vcodec_pm *pm)
>   		}
>   	}
>   
> -	ret = mtk_smi_larb_get(pm->larbvdec);
> -	if (ret) {
> -		mtk_v4l2_err("mtk_smi_larb_get larbvdec fail %d", ret);
> -		goto error;
> -	}>   	return;
>   
>   error:
> @@ -139,7 +113,6 @@ void mtk_vcodec_dec_clock_off(struct mtk_vcodec_pm *pm)
>   	struct mtk_vcodec_clk *dec_clk = &pm->vdec_clk;
>   	int i = 0;
>   
> -	mtk_smi_larb_put(pm->larbvdec);
>   	for (i = dec_clk->clk_num - 1; i >= 0; i--)
>   		clk_disable_unprepare(dec_clk->clk_info[i].vcodec_clk);
>   }
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> index c6c7672fecfb..64b73dd880ce 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> @@ -189,10 +189,7 @@ struct mtk_vcodec_clk {
>    */
>   struct mtk_vcodec_pm {
>   	struct mtk_vcodec_clk	vdec_clk;
> -	struct device	*larbvdec;
> -
>   	struct mtk_vcodec_clk	venc_clk;
> -	struct device	*larbvenc;
>   	struct device	*dev;
>   	struct mtk_vcodec_dev	*mtkdev;
>   };
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
> index 416f356af363..9a1515cf862d 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
> @@ -8,7 +8,6 @@
>   #include <media/v4l2-event.h>
>   #include <media/v4l2-mem2mem.h>
>   #include <media/videobuf2-dma-contig.h>
> -#include <soc/mediatek/smi.h>
>   #include <linux/pm_runtime.h>
>   
>   #include "mtk_vcodec_drv.h"
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
> index 1b2e4930ed27..dffb190267ed 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
> @@ -8,58 +8,36 @@
>   #include <linux/of_address.h>
>   #include <linux/of_platform.h>
>   #include <linux/pm_runtime.h>
> -#include <soc/mediatek/smi.h>
>   
>   #include "mtk_vcodec_enc_pm.h"
>   #include "mtk_vcodec_util.h"
>   
>   int mtk_vcodec_init_enc_pm(struct mtk_vcodec_dev *mtkdev)
>   {
> -	struct device_node *node;
>   	struct platform_device *pdev;
>   	struct mtk_vcodec_pm *pm;
>   	struct mtk_vcodec_clk *enc_clk;
>   	struct mtk_vcodec_clk_info *clk_info;
>   	int ret = 0, i = 0;
> -	struct device *dev;
>   
>   	pdev = mtkdev->plat_dev;
>   	pm = &mtkdev->pm;
>   	memset(pm, 0, sizeof(struct mtk_vcodec_pm));
>   	pm->mtkdev = mtkdev;
>   	pm->dev = &pdev->dev;
> -	dev = &pdev->dev;
>   	enc_clk = &pm->venc_clk;
>   
> -	node = of_parse_phandle(dev->of_node, "mediatek,larb", 0);
> -	if (!node) {
> -		mtk_v4l2_err("no mediatek,larb found");
> -		return -ENODEV;
> -	}
> -	pdev = of_find_device_by_node(node);
> -	of_node_put(node);
> -	if (!pdev) {
> -		mtk_v4l2_err("no mediatek,larb device found");
> -		return -ENODEV;
> -	}
> -	pm->larbvenc = &pdev->dev;
> -	pdev = mtkdev->plat_dev;
> -	pm->dev = &pdev->dev;
> -
>   	enc_clk->clk_num = of_property_count_strings(pdev->dev.of_node,
>   		"clock-names");
>   	if (enc_clk->clk_num > 0) {
>   		enc_clk->clk_info = devm_kcalloc(&pdev->dev,
>   			enc_clk->clk_num, sizeof(*clk_info),
>   			GFP_KERNEL);
> -		if (!enc_clk->clk_info) {
> -			ret = -ENOMEM;
> -			goto put_larbvenc;
> -		}
> +		if (!enc_clk->clk_info)
> +			return -ENOMEM;
>   	} else {
>   		mtk_v4l2_err("Failed to get venc clock count");
> -		ret = -EINVAL;
> -		goto put_larbvenc;
> +		return -EINVAL;
>   	}
>   
>   	for (i = 0; i < enc_clk->clk_num; i++) {
> @@ -68,29 +46,23 @@ int mtk_vcodec_init_enc_pm(struct mtk_vcodec_dev *mtkdev)
>   			"clock-names", i, &clk_info->clk_name);
>   		if (ret) {
>   			mtk_v4l2_err("venc failed to get clk name %d", i);
> -			goto put_larbvenc;
> +			return ret;
>   		}
>   		clk_info->vcodec_clk = devm_clk_get(&pdev->dev,
>   			clk_info->clk_name);
>   		if (IS_ERR(clk_info->vcodec_clk)) {
>   			mtk_v4l2_err("venc devm_clk_get (%d)%s fail", i,
>   				clk_info->clk_name);
> -			ret = PTR_ERR(clk_info->vcodec_clk);
> -			goto put_larbvenc;
> +			return PTR_ERR(clk_info->vcodec_clk);
>   		}
>   	}
>   
>   	return 0;
> -
> -put_larbvenc:
> -	put_device(pm->larbvenc);
> -	return ret;
>   }
>   
>   void mtk_vcodec_release_enc_pm(struct mtk_vcodec_dev *mtkdev)
>   {
>   	pm_runtime_disable(mtkdev->pm.dev);
> -	put_device(mtkdev->pm.larbvenc);
>   }
>   
>   
> @@ -108,11 +80,6 @@ void mtk_vcodec_enc_clock_on(struct mtk_vcodec_pm *pm)
>   		}
>   	}
>   
> -	ret = mtk_smi_larb_get(pm->larbvenc);
> -	if (ret) {
> -		mtk_v4l2_err("mtk_smi_larb_get larb3 fail %d", ret);
> -		goto clkerr;
> -	}
>   	return;
>   
>   clkerr:
> @@ -125,7 +92,6 @@ void mtk_vcodec_enc_clock_off(struct mtk_vcodec_pm *pm)
>   	struct mtk_vcodec_clk *enc_clk = &pm->venc_clk;
>   	int i = 0;
>   
> -	mtk_smi_larb_put(pm->larbvenc);
>   	for (i = enc_clk->clk_num - 1; i >= 0; i--)
>   		clk_disable_unprepare(enc_clk->clk_info[i].vcodec_clk);
>   }
> 
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 09/12] media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
@ 2021-09-29 12:13     ` Dafna Hirschfeld
  0 siblings, 0 replies; 105+ messages in thread
From: Dafna Hirschfeld @ 2021-09-29 12:13 UTC (permalink / raw)
  To: Yong Wu, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, youlin.pei, Matthias Kaehlcke, anan.sun,
	yi.kuo, acourbot, linux-media, dri-devel, Daniel Vetter,
	Chun-Kuang Hu, Philipp Zabel, Tiffany Lin, Hsin-Yi Wang,
	Eizan Miyamoto, anthony.huang, Frank Wunderlich, Irui Wang



On 29.09.21 03:37, Yong Wu wrote:
> MediaTek IOMMU has already added the device_link between the consumer
> and smi-larb device. If the vcodec device call the pm_runtime_get_sync,
> the smi-larb's pm_runtime_get_sync also be called automatically.
> 
> CC: Tiffany Lin <tiffany.lin@mediatek.com>
> CC: Irui Wang <irui.wang@mediatek.com>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> Reviewed-by: Evan Green <evgreen@chromium.org>
> Acked-by: Tiffany Lin <tiffany.lin@mediatek.com>
> Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
> ---
>   .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c   | 37 +++-------------
>   .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  3 --
>   .../platform/mtk-vcodec/mtk_vcodec_enc.c      |  1 -
>   .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c   | 44 +++----------------
>   4 files changed, 10 insertions(+), 75 deletions(-)
> 
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> index 6038db96f71c..d0bf9aa3b29d 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> @@ -8,14 +8,12 @@
>   #include <linux/of_address.h>
>   #include <linux/of_platform.h>
>   #include <linux/pm_runtime.h>
> -#include <soc/mediatek/smi.h>
>   
>   #include "mtk_vcodec_dec_pm.h"
>   #include "mtk_vcodec_util.h"
>   
>   int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
>   {
> -	struct device_node *node;
>   	struct platform_device *pdev;
>   	struct mtk_vcodec_pm *pm;
>   	struct mtk_vcodec_clk *dec_clk;
> @@ -26,18 +24,7 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
>   	pm = &mtkdev->pm;
>   	pm->mtkdev = mtkdev;
>   	dec_clk = &pm->vdec_clk;
> -	node = of_parse_phandle(pdev->dev.of_node, "mediatek,larb", 0);
> -	if (!node) {
> -		mtk_v4l2_err("of_parse_phandle mediatek,larb fail!");
> -		return -1;
> -	}
>   
> -	pdev = of_find_device_by_node(node);
> -	of_node_put(node);
> -	if (WARN_ON(!pdev)) {
> -		return -1;
> -	}
> -	pm->larbvdec = &pdev->dev;
>   	pdev = mtkdev->plat_dev;
>   	pm->dev = &pdev->dev;
>   
> @@ -47,14 +34,11 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
>   		dec_clk->clk_info = devm_kcalloc(&pdev->dev,
>   			dec_clk->clk_num, sizeof(*clk_info),
>   			GFP_KERNEL);
> -		if (!dec_clk->clk_info) {
> -			ret = -ENOMEM;
> -			goto put_device;
> -		}
> +		if (!dec_clk->clk_info)
> +			return -ENOMEM;
>   	} else {
>   		mtk_v4l2_err("Failed to get vdec clock count");
> -		ret = -EINVAL;
> -		goto put_device;
> +		return -EINVAL;
>   	}
>   
>   	for (i = 0; i < dec_clk->clk_num; i++) {
> @@ -63,29 +47,24 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
>   			"clock-names", i, &clk_info->clk_name);
>   		if (ret) {
>   			mtk_v4l2_err("Failed to get clock name id = %d", i);
> -			goto put_device;
> +			return ret;
>   		}
>   		clk_info->vcodec_clk = devm_clk_get(&pdev->dev,
>   			clk_info->clk_name);
>   		if (IS_ERR(clk_info->vcodec_clk)) {
>   			mtk_v4l2_err("devm_clk_get (%d)%s fail", i,
>   				clk_info->clk_name);
> -			ret = PTR_ERR(clk_info->vcodec_clk);
> -			goto put_device;
> +			return PTR_ERR(clk_info->vcodec_clk);
>   		}
>   	}
>   
>   	pm_runtime_enable(&pdev->dev);
>   	return 0;
> -put_device:
> -	put_device(pm->larbvdec);
> -	return ret;
>   }
>   
>   void mtk_vcodec_release_dec_pm(struct mtk_vcodec_dev *dev)
>   {
>   	pm_runtime_disable(dev->pm.dev);
> -	put_device(dev->pm.larbvdec);
>   }

Now that functions only do  'pm_runtime_disable(dev->pm.dev);' so it will be more
readable to remove the function mtk_vcodec_release_dec_pm
and replace with pm_runtime_disable(dev->pm.dev);
Same for the 'enc' equivalent.

Thanks,
Dafna

>   
>   int mtk_vcodec_dec_pw_on(struct mtk_vcodec_pm *pm)
> @@ -122,11 +101,6 @@ void mtk_vcodec_dec_clock_on(struct mtk_vcodec_pm *pm)
>   		}
>   	}
>   
> -	ret = mtk_smi_larb_get(pm->larbvdec);
> -	if (ret) {
> -		mtk_v4l2_err("mtk_smi_larb_get larbvdec fail %d", ret);
> -		goto error;
> -	}>   	return;
>   
>   error:
> @@ -139,7 +113,6 @@ void mtk_vcodec_dec_clock_off(struct mtk_vcodec_pm *pm)
>   	struct mtk_vcodec_clk *dec_clk = &pm->vdec_clk;
>   	int i = 0;
>   
> -	mtk_smi_larb_put(pm->larbvdec);
>   	for (i = dec_clk->clk_num - 1; i >= 0; i--)
>   		clk_disable_unprepare(dec_clk->clk_info[i].vcodec_clk);
>   }
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> index c6c7672fecfb..64b73dd880ce 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> @@ -189,10 +189,7 @@ struct mtk_vcodec_clk {
>    */
>   struct mtk_vcodec_pm {
>   	struct mtk_vcodec_clk	vdec_clk;
> -	struct device	*larbvdec;
> -
>   	struct mtk_vcodec_clk	venc_clk;
> -	struct device	*larbvenc;
>   	struct device	*dev;
>   	struct mtk_vcodec_dev	*mtkdev;
>   };
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
> index 416f356af363..9a1515cf862d 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
> @@ -8,7 +8,6 @@
>   #include <media/v4l2-event.h>
>   #include <media/v4l2-mem2mem.h>
>   #include <media/videobuf2-dma-contig.h>
> -#include <soc/mediatek/smi.h>
>   #include <linux/pm_runtime.h>
>   
>   #include "mtk_vcodec_drv.h"
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
> index 1b2e4930ed27..dffb190267ed 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
> @@ -8,58 +8,36 @@
>   #include <linux/of_address.h>
>   #include <linux/of_platform.h>
>   #include <linux/pm_runtime.h>
> -#include <soc/mediatek/smi.h>
>   
>   #include "mtk_vcodec_enc_pm.h"
>   #include "mtk_vcodec_util.h"
>   
>   int mtk_vcodec_init_enc_pm(struct mtk_vcodec_dev *mtkdev)
>   {
> -	struct device_node *node;
>   	struct platform_device *pdev;
>   	struct mtk_vcodec_pm *pm;
>   	struct mtk_vcodec_clk *enc_clk;
>   	struct mtk_vcodec_clk_info *clk_info;
>   	int ret = 0, i = 0;
> -	struct device *dev;
>   
>   	pdev = mtkdev->plat_dev;
>   	pm = &mtkdev->pm;
>   	memset(pm, 0, sizeof(struct mtk_vcodec_pm));
>   	pm->mtkdev = mtkdev;
>   	pm->dev = &pdev->dev;
> -	dev = &pdev->dev;
>   	enc_clk = &pm->venc_clk;
>   
> -	node = of_parse_phandle(dev->of_node, "mediatek,larb", 0);
> -	if (!node) {
> -		mtk_v4l2_err("no mediatek,larb found");
> -		return -ENODEV;
> -	}
> -	pdev = of_find_device_by_node(node);
> -	of_node_put(node);
> -	if (!pdev) {
> -		mtk_v4l2_err("no mediatek,larb device found");
> -		return -ENODEV;
> -	}
> -	pm->larbvenc = &pdev->dev;
> -	pdev = mtkdev->plat_dev;
> -	pm->dev = &pdev->dev;
> -
>   	enc_clk->clk_num = of_property_count_strings(pdev->dev.of_node,
>   		"clock-names");
>   	if (enc_clk->clk_num > 0) {
>   		enc_clk->clk_info = devm_kcalloc(&pdev->dev,
>   			enc_clk->clk_num, sizeof(*clk_info),
>   			GFP_KERNEL);
> -		if (!enc_clk->clk_info) {
> -			ret = -ENOMEM;
> -			goto put_larbvenc;
> -		}
> +		if (!enc_clk->clk_info)
> +			return -ENOMEM;
>   	} else {
>   		mtk_v4l2_err("Failed to get venc clock count");
> -		ret = -EINVAL;
> -		goto put_larbvenc;
> +		return -EINVAL;
>   	}
>   
>   	for (i = 0; i < enc_clk->clk_num; i++) {
> @@ -68,29 +46,23 @@ int mtk_vcodec_init_enc_pm(struct mtk_vcodec_dev *mtkdev)
>   			"clock-names", i, &clk_info->clk_name);
>   		if (ret) {
>   			mtk_v4l2_err("venc failed to get clk name %d", i);
> -			goto put_larbvenc;
> +			return ret;
>   		}
>   		clk_info->vcodec_clk = devm_clk_get(&pdev->dev,
>   			clk_info->clk_name);
>   		if (IS_ERR(clk_info->vcodec_clk)) {
>   			mtk_v4l2_err("venc devm_clk_get (%d)%s fail", i,
>   				clk_info->clk_name);
> -			ret = PTR_ERR(clk_info->vcodec_clk);
> -			goto put_larbvenc;
> +			return PTR_ERR(clk_info->vcodec_clk);
>   		}
>   	}
>   
>   	return 0;
> -
> -put_larbvenc:
> -	put_device(pm->larbvenc);
> -	return ret;
>   }
>   
>   void mtk_vcodec_release_enc_pm(struct mtk_vcodec_dev *mtkdev)
>   {
>   	pm_runtime_disable(mtkdev->pm.dev);
> -	put_device(mtkdev->pm.larbvenc);
>   }
>   
>   
> @@ -108,11 +80,6 @@ void mtk_vcodec_enc_clock_on(struct mtk_vcodec_pm *pm)
>   		}
>   	}
>   
> -	ret = mtk_smi_larb_get(pm->larbvenc);
> -	if (ret) {
> -		mtk_v4l2_err("mtk_smi_larb_get larb3 fail %d", ret);
> -		goto clkerr;
> -	}
>   	return;
>   
>   clkerr:
> @@ -125,7 +92,6 @@ void mtk_vcodec_enc_clock_off(struct mtk_vcodec_pm *pm)
>   	struct mtk_vcodec_clk *enc_clk = &pm->venc_clk;
>   	int i = 0;
>   
> -	mtk_smi_larb_put(pm->larbvenc);
>   	for (i = enc_clk->clk_num - 1; i >= 0; i--)
>   		clk_disable_unprepare(enc_clk->clk_info[i].vcodec_clk);
>   }
> 

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 09/12] media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
@ 2021-09-29 12:13     ` Dafna Hirschfeld
  0 siblings, 0 replies; 105+ messages in thread
From: Dafna Hirschfeld @ 2021-09-29 12:13 UTC (permalink / raw)
  To: Yong Wu, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, youlin.pei, Matthias Kaehlcke, anan.sun,
	yi.kuo, acourbot, linux-media, dri-devel, Daniel Vetter,
	Chun-Kuang Hu, Philipp Zabel, Tiffany Lin, Hsin-Yi Wang,
	Eizan Miyamoto, anthony.huang, Frank Wunderlich, Irui Wang



On 29.09.21 03:37, Yong Wu wrote:
> MediaTek IOMMU has already added the device_link between the consumer
> and smi-larb device. If the vcodec device call the pm_runtime_get_sync,
> the smi-larb's pm_runtime_get_sync also be called automatically.
> 
> CC: Tiffany Lin <tiffany.lin@mediatek.com>
> CC: Irui Wang <irui.wang@mediatek.com>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> Reviewed-by: Evan Green <evgreen@chromium.org>
> Acked-by: Tiffany Lin <tiffany.lin@mediatek.com>
> Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
> ---
>   .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c   | 37 +++-------------
>   .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  3 --
>   .../platform/mtk-vcodec/mtk_vcodec_enc.c      |  1 -
>   .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c   | 44 +++----------------
>   4 files changed, 10 insertions(+), 75 deletions(-)
> 
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> index 6038db96f71c..d0bf9aa3b29d 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> @@ -8,14 +8,12 @@
>   #include <linux/of_address.h>
>   #include <linux/of_platform.h>
>   #include <linux/pm_runtime.h>
> -#include <soc/mediatek/smi.h>
>   
>   #include "mtk_vcodec_dec_pm.h"
>   #include "mtk_vcodec_util.h"
>   
>   int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
>   {
> -	struct device_node *node;
>   	struct platform_device *pdev;
>   	struct mtk_vcodec_pm *pm;
>   	struct mtk_vcodec_clk *dec_clk;
> @@ -26,18 +24,7 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
>   	pm = &mtkdev->pm;
>   	pm->mtkdev = mtkdev;
>   	dec_clk = &pm->vdec_clk;
> -	node = of_parse_phandle(pdev->dev.of_node, "mediatek,larb", 0);
> -	if (!node) {
> -		mtk_v4l2_err("of_parse_phandle mediatek,larb fail!");
> -		return -1;
> -	}
>   
> -	pdev = of_find_device_by_node(node);
> -	of_node_put(node);
> -	if (WARN_ON(!pdev)) {
> -		return -1;
> -	}
> -	pm->larbvdec = &pdev->dev;
>   	pdev = mtkdev->plat_dev;
>   	pm->dev = &pdev->dev;
>   
> @@ -47,14 +34,11 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
>   		dec_clk->clk_info = devm_kcalloc(&pdev->dev,
>   			dec_clk->clk_num, sizeof(*clk_info),
>   			GFP_KERNEL);
> -		if (!dec_clk->clk_info) {
> -			ret = -ENOMEM;
> -			goto put_device;
> -		}
> +		if (!dec_clk->clk_info)
> +			return -ENOMEM;
>   	} else {
>   		mtk_v4l2_err("Failed to get vdec clock count");
> -		ret = -EINVAL;
> -		goto put_device;
> +		return -EINVAL;
>   	}
>   
>   	for (i = 0; i < dec_clk->clk_num; i++) {
> @@ -63,29 +47,24 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
>   			"clock-names", i, &clk_info->clk_name);
>   		if (ret) {
>   			mtk_v4l2_err("Failed to get clock name id = %d", i);
> -			goto put_device;
> +			return ret;
>   		}
>   		clk_info->vcodec_clk = devm_clk_get(&pdev->dev,
>   			clk_info->clk_name);
>   		if (IS_ERR(clk_info->vcodec_clk)) {
>   			mtk_v4l2_err("devm_clk_get (%d)%s fail", i,
>   				clk_info->clk_name);
> -			ret = PTR_ERR(clk_info->vcodec_clk);
> -			goto put_device;
> +			return PTR_ERR(clk_info->vcodec_clk);
>   		}
>   	}
>   
>   	pm_runtime_enable(&pdev->dev);
>   	return 0;
> -put_device:
> -	put_device(pm->larbvdec);
> -	return ret;
>   }
>   
>   void mtk_vcodec_release_dec_pm(struct mtk_vcodec_dev *dev)
>   {
>   	pm_runtime_disable(dev->pm.dev);
> -	put_device(dev->pm.larbvdec);
>   }

Now that functions only do  'pm_runtime_disable(dev->pm.dev);' so it will be more
readable to remove the function mtk_vcodec_release_dec_pm
and replace with pm_runtime_disable(dev->pm.dev);
Same for the 'enc' equivalent.

Thanks,
Dafna

>   
>   int mtk_vcodec_dec_pw_on(struct mtk_vcodec_pm *pm)
> @@ -122,11 +101,6 @@ void mtk_vcodec_dec_clock_on(struct mtk_vcodec_pm *pm)
>   		}
>   	}
>   
> -	ret = mtk_smi_larb_get(pm->larbvdec);
> -	if (ret) {
> -		mtk_v4l2_err("mtk_smi_larb_get larbvdec fail %d", ret);
> -		goto error;
> -	}>   	return;
>   
>   error:
> @@ -139,7 +113,6 @@ void mtk_vcodec_dec_clock_off(struct mtk_vcodec_pm *pm)
>   	struct mtk_vcodec_clk *dec_clk = &pm->vdec_clk;
>   	int i = 0;
>   
> -	mtk_smi_larb_put(pm->larbvdec);
>   	for (i = dec_clk->clk_num - 1; i >= 0; i--)
>   		clk_disable_unprepare(dec_clk->clk_info[i].vcodec_clk);
>   }
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> index c6c7672fecfb..64b73dd880ce 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> @@ -189,10 +189,7 @@ struct mtk_vcodec_clk {
>    */
>   struct mtk_vcodec_pm {
>   	struct mtk_vcodec_clk	vdec_clk;
> -	struct device	*larbvdec;
> -
>   	struct mtk_vcodec_clk	venc_clk;
> -	struct device	*larbvenc;
>   	struct device	*dev;
>   	struct mtk_vcodec_dev	*mtkdev;
>   };
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
> index 416f356af363..9a1515cf862d 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
> @@ -8,7 +8,6 @@
>   #include <media/v4l2-event.h>
>   #include <media/v4l2-mem2mem.h>
>   #include <media/videobuf2-dma-contig.h>
> -#include <soc/mediatek/smi.h>
>   #include <linux/pm_runtime.h>
>   
>   #include "mtk_vcodec_drv.h"
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
> index 1b2e4930ed27..dffb190267ed 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
> @@ -8,58 +8,36 @@
>   #include <linux/of_address.h>
>   #include <linux/of_platform.h>
>   #include <linux/pm_runtime.h>
> -#include <soc/mediatek/smi.h>
>   
>   #include "mtk_vcodec_enc_pm.h"
>   #include "mtk_vcodec_util.h"
>   
>   int mtk_vcodec_init_enc_pm(struct mtk_vcodec_dev *mtkdev)
>   {
> -	struct device_node *node;
>   	struct platform_device *pdev;
>   	struct mtk_vcodec_pm *pm;
>   	struct mtk_vcodec_clk *enc_clk;
>   	struct mtk_vcodec_clk_info *clk_info;
>   	int ret = 0, i = 0;
> -	struct device *dev;
>   
>   	pdev = mtkdev->plat_dev;
>   	pm = &mtkdev->pm;
>   	memset(pm, 0, sizeof(struct mtk_vcodec_pm));
>   	pm->mtkdev = mtkdev;
>   	pm->dev = &pdev->dev;
> -	dev = &pdev->dev;
>   	enc_clk = &pm->venc_clk;
>   
> -	node = of_parse_phandle(dev->of_node, "mediatek,larb", 0);
> -	if (!node) {
> -		mtk_v4l2_err("no mediatek,larb found");
> -		return -ENODEV;
> -	}
> -	pdev = of_find_device_by_node(node);
> -	of_node_put(node);
> -	if (!pdev) {
> -		mtk_v4l2_err("no mediatek,larb device found");
> -		return -ENODEV;
> -	}
> -	pm->larbvenc = &pdev->dev;
> -	pdev = mtkdev->plat_dev;
> -	pm->dev = &pdev->dev;
> -
>   	enc_clk->clk_num = of_property_count_strings(pdev->dev.of_node,
>   		"clock-names");
>   	if (enc_clk->clk_num > 0) {
>   		enc_clk->clk_info = devm_kcalloc(&pdev->dev,
>   			enc_clk->clk_num, sizeof(*clk_info),
>   			GFP_KERNEL);
> -		if (!enc_clk->clk_info) {
> -			ret = -ENOMEM;
> -			goto put_larbvenc;
> -		}
> +		if (!enc_clk->clk_info)
> +			return -ENOMEM;
>   	} else {
>   		mtk_v4l2_err("Failed to get venc clock count");
> -		ret = -EINVAL;
> -		goto put_larbvenc;
> +		return -EINVAL;
>   	}
>   
>   	for (i = 0; i < enc_clk->clk_num; i++) {
> @@ -68,29 +46,23 @@ int mtk_vcodec_init_enc_pm(struct mtk_vcodec_dev *mtkdev)
>   			"clock-names", i, &clk_info->clk_name);
>   		if (ret) {
>   			mtk_v4l2_err("venc failed to get clk name %d", i);
> -			goto put_larbvenc;
> +			return ret;
>   		}
>   		clk_info->vcodec_clk = devm_clk_get(&pdev->dev,
>   			clk_info->clk_name);
>   		if (IS_ERR(clk_info->vcodec_clk)) {
>   			mtk_v4l2_err("venc devm_clk_get (%d)%s fail", i,
>   				clk_info->clk_name);
> -			ret = PTR_ERR(clk_info->vcodec_clk);
> -			goto put_larbvenc;
> +			return PTR_ERR(clk_info->vcodec_clk);
>   		}
>   	}
>   
>   	return 0;
> -
> -put_larbvenc:
> -	put_device(pm->larbvenc);
> -	return ret;
>   }
>   
>   void mtk_vcodec_release_enc_pm(struct mtk_vcodec_dev *mtkdev)
>   {
>   	pm_runtime_disable(mtkdev->pm.dev);
> -	put_device(mtkdev->pm.larbvenc);
>   }
>   
>   
> @@ -108,11 +80,6 @@ void mtk_vcodec_enc_clock_on(struct mtk_vcodec_pm *pm)
>   		}
>   	}
>   
> -	ret = mtk_smi_larb_get(pm->larbvenc);
> -	if (ret) {
> -		mtk_v4l2_err("mtk_smi_larb_get larb3 fail %d", ret);
> -		goto clkerr;
> -	}
>   	return;
>   
>   clkerr:
> @@ -125,7 +92,6 @@ void mtk_vcodec_enc_clock_off(struct mtk_vcodec_pm *pm)
>   	struct mtk_vcodec_clk *enc_clk = &pm->venc_clk;
>   	int i = 0;
>   
> -	mtk_smi_larb_put(pm->larbvenc);
>   	for (i = enc_clk->clk_num - 1; i >= 0; i--)
>   		clk_disable_unprepare(enc_clk->clk_info[i].vcodec_clk);
>   }
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 03/12] iommu/mediatek: Add probe_defer for smi-larb
  2021-09-29  1:37   ` Yong Wu
  (?)
  (?)
@ 2021-09-29 16:33     ` Dafna Hirschfeld
  -1 siblings, 0 replies; 105+ messages in thread
From: Dafna Hirschfeld @ 2021-09-29 16:33 UTC (permalink / raw)
  To: Yong Wu, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, youlin.pei, Matthias Kaehlcke, anan.sun,
	yi.kuo, acourbot, linux-media, dri-devel, Daniel Vetter,
	Chun-Kuang Hu, Philipp Zabel, Tiffany Lin, Hsin-Yi Wang,
	Eizan Miyamoto, anthony.huang, Frank Wunderlich



On 29.09.21 03:37, Yong Wu wrote:
> Prepare for adding device_link.
> 
> The iommu consumer should use device_link to connect with the
> smi-larb(supplier). then the smi-larb should run before the iommu
> consumer. Here we delay the iommu driver until the smi driver is ready,
> then all the iommu consumers always are after the smi driver.
> 
> When there is no this patch, if some consumer drivers run before
> smi-larb, the supplier link_status is DL_DEV_NO_DRIVER(0) in the
> device_link_add, then device_links_driver_bound will use WARN_ON
> to complain that the link_status of supplier is not right.
> 
> device_is_bound may be more elegant here. but it is not allowed to
> EXPORT from https://lore.kernel.org/patchwork/patch/1334670/.
> 
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
> ---
>   drivers/iommu/mtk_iommu.c    | 2 +-
>   drivers/iommu/mtk_iommu_v1.c | 2 +-
>   2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index d837adfd1da5..d5848f78a677 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -844,7 +844,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
>   			id = i;
>   
>   		plarbdev = of_find_device_by_node(larbnode);
> -		if (!plarbdev) {
> +		if (!plarbdev || !plarbdev->dev.driver) {
>   			of_node_put(larbnode);
>   			return -EPROBE_DEFER;

if plarbdev is null doesn't that mean that the device does not exist?
so we should return -ENODEV in that case?

thanks,
Dafna

>   		}
> diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
> index 1467ba1e4417..4d7809432239 100644
> --- a/drivers/iommu/mtk_iommu_v1.c
> +++ b/drivers/iommu/mtk_iommu_v1.c
> @@ -602,7 +602,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
>   		}
>   
>   		plarbdev = of_find_device_by_node(larbnode);
> -		if (!plarbdev) {
> +		if (!plarbdev || !plarbdev->dev.driver) {
>   			of_node_put(larbnode);
>   			return -EPROBE_DEFER;
>   		}
> 

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 03/12] iommu/mediatek: Add probe_defer for smi-larb
@ 2021-09-29 16:33     ` Dafna Hirschfeld
  0 siblings, 0 replies; 105+ messages in thread
From: Dafna Hirschfeld @ 2021-09-29 16:33 UTC (permalink / raw)
  To: Yong Wu, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Chun-Kuang Hu, Will Deacon, dri-devel, anthony.huang, youlin.pei,
	Evan Green, Eizan Miyamoto, Matthias Kaehlcke, linux-media,
	devicetree, Philipp Zabel, Frank Wunderlich, yi.kuo,
	linux-mediatek, Hsin-Yi Wang, Tiffany Lin, linux-arm-kernel,
	anan.sun, srv_heupstream, acourbot, linux-kernel, iommu,
	Daniel Vetter, Robin Murphy



On 29.09.21 03:37, Yong Wu wrote:
> Prepare for adding device_link.
> 
> The iommu consumer should use device_link to connect with the
> smi-larb(supplier). then the smi-larb should run before the iommu
> consumer. Here we delay the iommu driver until the smi driver is ready,
> then all the iommu consumers always are after the smi driver.
> 
> When there is no this patch, if some consumer drivers run before
> smi-larb, the supplier link_status is DL_DEV_NO_DRIVER(0) in the
> device_link_add, then device_links_driver_bound will use WARN_ON
> to complain that the link_status of supplier is not right.
> 
> device_is_bound may be more elegant here. but it is not allowed to
> EXPORT from https://lore.kernel.org/patchwork/patch/1334670/.
> 
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
> ---
>   drivers/iommu/mtk_iommu.c    | 2 +-
>   drivers/iommu/mtk_iommu_v1.c | 2 +-
>   2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index d837adfd1da5..d5848f78a677 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -844,7 +844,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
>   			id = i;
>   
>   		plarbdev = of_find_device_by_node(larbnode);
> -		if (!plarbdev) {
> +		if (!plarbdev || !plarbdev->dev.driver) {
>   			of_node_put(larbnode);
>   			return -EPROBE_DEFER;

if plarbdev is null doesn't that mean that the device does not exist?
so we should return -ENODEV in that case?

thanks,
Dafna

>   		}
> diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
> index 1467ba1e4417..4d7809432239 100644
> --- a/drivers/iommu/mtk_iommu_v1.c
> +++ b/drivers/iommu/mtk_iommu_v1.c
> @@ -602,7 +602,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
>   		}
>   
>   		plarbdev = of_find_device_by_node(larbnode);
> -		if (!plarbdev) {
> +		if (!plarbdev || !plarbdev->dev.driver) {
>   			of_node_put(larbnode);
>   			return -EPROBE_DEFER;
>   		}
> 
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 03/12] iommu/mediatek: Add probe_defer for smi-larb
@ 2021-09-29 16:33     ` Dafna Hirschfeld
  0 siblings, 0 replies; 105+ messages in thread
From: Dafna Hirschfeld @ 2021-09-29 16:33 UTC (permalink / raw)
  To: Yong Wu, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, youlin.pei, Matthias Kaehlcke, anan.sun,
	yi.kuo, acourbot, linux-media, dri-devel, Daniel Vetter,
	Chun-Kuang Hu, Philipp Zabel, Tiffany Lin, Hsin-Yi Wang,
	Eizan Miyamoto, anthony.huang, Frank Wunderlich



On 29.09.21 03:37, Yong Wu wrote:
> Prepare for adding device_link.
> 
> The iommu consumer should use device_link to connect with the
> smi-larb(supplier). then the smi-larb should run before the iommu
> consumer. Here we delay the iommu driver until the smi driver is ready,
> then all the iommu consumers always are after the smi driver.
> 
> When there is no this patch, if some consumer drivers run before
> smi-larb, the supplier link_status is DL_DEV_NO_DRIVER(0) in the
> device_link_add, then device_links_driver_bound will use WARN_ON
> to complain that the link_status of supplier is not right.
> 
> device_is_bound may be more elegant here. but it is not allowed to
> EXPORT from https://lore.kernel.org/patchwork/patch/1334670/.
> 
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
> ---
>   drivers/iommu/mtk_iommu.c    | 2 +-
>   drivers/iommu/mtk_iommu_v1.c | 2 +-
>   2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index d837adfd1da5..d5848f78a677 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -844,7 +844,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
>   			id = i;
>   
>   		plarbdev = of_find_device_by_node(larbnode);
> -		if (!plarbdev) {
> +		if (!plarbdev || !plarbdev->dev.driver) {
>   			of_node_put(larbnode);
>   			return -EPROBE_DEFER;

if plarbdev is null doesn't that mean that the device does not exist?
so we should return -ENODEV in that case?

thanks,
Dafna

>   		}
> diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
> index 1467ba1e4417..4d7809432239 100644
> --- a/drivers/iommu/mtk_iommu_v1.c
> +++ b/drivers/iommu/mtk_iommu_v1.c
> @@ -602,7 +602,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
>   		}
>   
>   		plarbdev = of_find_device_by_node(larbnode);
> -		if (!plarbdev) {
> +		if (!plarbdev || !plarbdev->dev.driver) {
>   			of_node_put(larbnode);
>   			return -EPROBE_DEFER;
>   		}
> 

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 03/12] iommu/mediatek: Add probe_defer for smi-larb
@ 2021-09-29 16:33     ` Dafna Hirschfeld
  0 siblings, 0 replies; 105+ messages in thread
From: Dafna Hirschfeld @ 2021-09-29 16:33 UTC (permalink / raw)
  To: Yong Wu, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, youlin.pei, Matthias Kaehlcke, anan.sun,
	yi.kuo, acourbot, linux-media, dri-devel, Daniel Vetter,
	Chun-Kuang Hu, Philipp Zabel, Tiffany Lin, Hsin-Yi Wang,
	Eizan Miyamoto, anthony.huang, Frank Wunderlich



On 29.09.21 03:37, Yong Wu wrote:
> Prepare for adding device_link.
> 
> The iommu consumer should use device_link to connect with the
> smi-larb(supplier). then the smi-larb should run before the iommu
> consumer. Here we delay the iommu driver until the smi driver is ready,
> then all the iommu consumers always are after the smi driver.
> 
> When there is no this patch, if some consumer drivers run before
> smi-larb, the supplier link_status is DL_DEV_NO_DRIVER(0) in the
> device_link_add, then device_links_driver_bound will use WARN_ON
> to complain that the link_status of supplier is not right.
> 
> device_is_bound may be more elegant here. but it is not allowed to
> EXPORT from https://lore.kernel.org/patchwork/patch/1334670/.
> 
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
> ---
>   drivers/iommu/mtk_iommu.c    | 2 +-
>   drivers/iommu/mtk_iommu_v1.c | 2 +-
>   2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index d837adfd1da5..d5848f78a677 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -844,7 +844,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
>   			id = i;
>   
>   		plarbdev = of_find_device_by_node(larbnode);
> -		if (!plarbdev) {
> +		if (!plarbdev || !plarbdev->dev.driver) {
>   			of_node_put(larbnode);
>   			return -EPROBE_DEFER;

if plarbdev is null doesn't that mean that the device does not exist?
so we should return -ENODEV in that case?

thanks,
Dafna

>   		}
> diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
> index 1467ba1e4417..4d7809432239 100644
> --- a/drivers/iommu/mtk_iommu_v1.c
> +++ b/drivers/iommu/mtk_iommu_v1.c
> @@ -602,7 +602,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
>   		}
>   
>   		plarbdev = of_find_device_by_node(larbnode);
> -		if (!plarbdev) {
> +		if (!plarbdev || !plarbdev->dev.driver) {
>   			of_node_put(larbnode);
>   			return -EPROBE_DEFER;
>   		}
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 09/12] media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
  2021-09-29 12:13     ` Dafna Hirschfeld
  (?)
  (?)
@ 2021-09-30  3:28       ` Yong Wu
  -1 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-30  3:28 UTC (permalink / raw)
  To: Dafna Hirschfeld, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, youlin.pei, Matthias Kaehlcke, anan.sun,
	yi.kuo, acourbot, linux-media, dri-devel, Daniel Vetter,
	Chun-Kuang Hu, Philipp Zabel, Tiffany Lin, Hsin-Yi Wang,
	Eizan Miyamoto, anthony.huang, Frank Wunderlich, Irui Wang

Hi Dafna,

Thanks very much for the review.

On Wed, 2021-09-29 at 14:13 +0200, Dafna Hirschfeld wrote:
> 
> On 29.09.21 03:37, Yong Wu wrote:
> > MediaTek IOMMU has already added the device_link between the
> > consumer
> > and smi-larb device. If the vcodec device call the
> > pm_runtime_get_sync,
> > the smi-larb's pm_runtime_get_sync also be called automatically.
> > 
> > CC: Tiffany Lin <tiffany.lin@mediatek.com>
> > CC: Irui Wang <irui.wang@mediatek.com>
> > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > Reviewed-by: Evan Green <evgreen@chromium.org>
> > Acked-by: Tiffany Lin <tiffany.lin@mediatek.com>
> > Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
> > ---
> >   .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c   | 37 +++-----------
> > --
> >   .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  3 --
> >   .../platform/mtk-vcodec/mtk_vcodec_enc.c      |  1 -
> >   .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c   | 44 +++-----------
> > -----
> >   4 files changed, 10 insertions(+), 75 deletions(-)
> > 
> > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> > b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> > index 6038db96f71c..d0bf9aa3b29d 100644
> > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> > @@ -8,14 +8,12 @@
> >   #include <linux/of_address.h>
> >   #include <linux/of_platform.h>
> >   #include <linux/pm_runtime.h>
> > -#include <soc/mediatek/smi.h>
> >   
> >   #include "mtk_vcodec_dec_pm.h"
> >   #include "mtk_vcodec_util.h"
> >   
> >   int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
> >   {
> > -	struct device_node *node;
> >   	struct platform_device *pdev;
> >   	struct mtk_vcodec_pm *pm;
> >   	struct mtk_vcodec_clk *dec_clk;
> > @@ -26,18 +24,7 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev
> > *mtkdev)
> >   	pm = &mtkdev->pm;
> >   	pm->mtkdev = mtkdev;
> >   	dec_clk = &pm->vdec_clk;
> > -	node = of_parse_phandle(pdev->dev.of_node, "mediatek,larb", 0);
> > -	if (!node) {
> > -		mtk_v4l2_err("of_parse_phandle mediatek,larb fail!");
> > -		return -1;
> > -	}
> >   
> > -	pdev = of_find_device_by_node(node);
> > -	of_node_put(node);
> > -	if (WARN_ON(!pdev)) {
> > -		return -1;
> > -	}
> > -	pm->larbvdec = &pdev->dev;
> >   	pdev = mtkdev->plat_dev;
> >   	pm->dev = &pdev->dev;
> >   
> > @@ -47,14 +34,11 @@ int mtk_vcodec_init_dec_pm(struct
> > mtk_vcodec_dev *mtkdev)
> >   		dec_clk->clk_info = devm_kcalloc(&pdev->dev,
> >   			dec_clk->clk_num, sizeof(*clk_info),
> >   			GFP_KERNEL);
> > -		if (!dec_clk->clk_info) {
> > -			ret = -ENOMEM;
> > -			goto put_device;
> > -		}
> > +		if (!dec_clk->clk_info)
> > +			return -ENOMEM;
> >   	} else {
> >   		mtk_v4l2_err("Failed to get vdec clock count");
> > -		ret = -EINVAL;
> > -		goto put_device;
> > +		return -EINVAL;
> >   	}
> >   
> >   	for (i = 0; i < dec_clk->clk_num; i++) {
> > @@ -63,29 +47,24 @@ int mtk_vcodec_init_dec_pm(struct
> > mtk_vcodec_dev *mtkdev)
> >   			"clock-names", i, &clk_info->clk_name);
> >   		if (ret) {
> >   			mtk_v4l2_err("Failed to get clock name id =
> > %d", i);
> > -			goto put_device;
> > +			return ret;
> >   		}
> >   		clk_info->vcodec_clk = devm_clk_get(&pdev->dev,
> >   			clk_info->clk_name);
> >   		if (IS_ERR(clk_info->vcodec_clk)) {
> >   			mtk_v4l2_err("devm_clk_get (%d)%s fail", i,
> >   				clk_info->clk_name);
> > -			ret = PTR_ERR(clk_info->vcodec_clk);
> > -			goto put_device;
> > +			return PTR_ERR(clk_info->vcodec_clk);
> >   		}
> >   	}
> >   
> >   	pm_runtime_enable(&pdev->dev);
> >   	return 0;
> > -put_device:
> > -	put_device(pm->larbvdec);
> > -	return ret;
> >   }
> >   
> >   void mtk_vcodec_release_dec_pm(struct mtk_vcodec_dev *dev)
> >   {
> >   	pm_runtime_disable(dev->pm.dev);
> > -	put_device(dev->pm.larbvdec);
> >   }
> 
> Now that functions only do  'pm_runtime_disable(dev->pm.dev);' so it
> will be more
> readable to remove the function mtk_vcodec_release_dec_pm
> and replace with pm_runtime_disable(dev->pm.dev);
> Same for the 'enc' equivalent.

Make sense. But It may be not proper if using pm_runtime_disable
as the symmetry with mtk_vcodec_init_dec_pm in the mtk_vcodec_probe.

Maybe we should move pm_runtime_enable out from mtk_vcodec_init_dec_pm
into mtk_vcodec_probe. I could do a new patch for this. Is this ok for
you?

> 
> Thanks,
> Dafna

[snip]

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 09/12] media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
@ 2021-09-30  3:28       ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-30  3:28 UTC (permalink / raw)
  To: Dafna Hirschfeld, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Chun-Kuang Hu, Will Deacon, dri-devel, anthony.huang, youlin.pei,
	Irui Wang, Evan Green, Eizan Miyamoto, Matthias Kaehlcke,
	linux-media, devicetree, Philipp Zabel, Frank Wunderlich, yi.kuo,
	linux-mediatek, Hsin-Yi Wang, Tiffany Lin, linux-arm-kernel,
	anan.sun, srv_heupstream, acourbot, linux-kernel, iommu,
	Daniel Vetter, Robin Murphy

Hi Dafna,

Thanks very much for the review.

On Wed, 2021-09-29 at 14:13 +0200, Dafna Hirschfeld wrote:
> 
> On 29.09.21 03:37, Yong Wu wrote:
> > MediaTek IOMMU has already added the device_link between the
> > consumer
> > and smi-larb device. If the vcodec device call the
> > pm_runtime_get_sync,
> > the smi-larb's pm_runtime_get_sync also be called automatically.
> > 
> > CC: Tiffany Lin <tiffany.lin@mediatek.com>
> > CC: Irui Wang <irui.wang@mediatek.com>
> > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > Reviewed-by: Evan Green <evgreen@chromium.org>
> > Acked-by: Tiffany Lin <tiffany.lin@mediatek.com>
> > Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
> > ---
> >   .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c   | 37 +++-----------
> > --
> >   .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  3 --
> >   .../platform/mtk-vcodec/mtk_vcodec_enc.c      |  1 -
> >   .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c   | 44 +++-----------
> > -----
> >   4 files changed, 10 insertions(+), 75 deletions(-)
> > 
> > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> > b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> > index 6038db96f71c..d0bf9aa3b29d 100644
> > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> > @@ -8,14 +8,12 @@
> >   #include <linux/of_address.h>
> >   #include <linux/of_platform.h>
> >   #include <linux/pm_runtime.h>
> > -#include <soc/mediatek/smi.h>
> >   
> >   #include "mtk_vcodec_dec_pm.h"
> >   #include "mtk_vcodec_util.h"
> >   
> >   int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
> >   {
> > -	struct device_node *node;
> >   	struct platform_device *pdev;
> >   	struct mtk_vcodec_pm *pm;
> >   	struct mtk_vcodec_clk *dec_clk;
> > @@ -26,18 +24,7 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev
> > *mtkdev)
> >   	pm = &mtkdev->pm;
> >   	pm->mtkdev = mtkdev;
> >   	dec_clk = &pm->vdec_clk;
> > -	node = of_parse_phandle(pdev->dev.of_node, "mediatek,larb", 0);
> > -	if (!node) {
> > -		mtk_v4l2_err("of_parse_phandle mediatek,larb fail!");
> > -		return -1;
> > -	}
> >   
> > -	pdev = of_find_device_by_node(node);
> > -	of_node_put(node);
> > -	if (WARN_ON(!pdev)) {
> > -		return -1;
> > -	}
> > -	pm->larbvdec = &pdev->dev;
> >   	pdev = mtkdev->plat_dev;
> >   	pm->dev = &pdev->dev;
> >   
> > @@ -47,14 +34,11 @@ int mtk_vcodec_init_dec_pm(struct
> > mtk_vcodec_dev *mtkdev)
> >   		dec_clk->clk_info = devm_kcalloc(&pdev->dev,
> >   			dec_clk->clk_num, sizeof(*clk_info),
> >   			GFP_KERNEL);
> > -		if (!dec_clk->clk_info) {
> > -			ret = -ENOMEM;
> > -			goto put_device;
> > -		}
> > +		if (!dec_clk->clk_info)
> > +			return -ENOMEM;
> >   	} else {
> >   		mtk_v4l2_err("Failed to get vdec clock count");
> > -		ret = -EINVAL;
> > -		goto put_device;
> > +		return -EINVAL;
> >   	}
> >   
> >   	for (i = 0; i < dec_clk->clk_num; i++) {
> > @@ -63,29 +47,24 @@ int mtk_vcodec_init_dec_pm(struct
> > mtk_vcodec_dev *mtkdev)
> >   			"clock-names", i, &clk_info->clk_name);
> >   		if (ret) {
> >   			mtk_v4l2_err("Failed to get clock name id =
> > %d", i);
> > -			goto put_device;
> > +			return ret;
> >   		}
> >   		clk_info->vcodec_clk = devm_clk_get(&pdev->dev,
> >   			clk_info->clk_name);
> >   		if (IS_ERR(clk_info->vcodec_clk)) {
> >   			mtk_v4l2_err("devm_clk_get (%d)%s fail", i,
> >   				clk_info->clk_name);
> > -			ret = PTR_ERR(clk_info->vcodec_clk);
> > -			goto put_device;
> > +			return PTR_ERR(clk_info->vcodec_clk);
> >   		}
> >   	}
> >   
> >   	pm_runtime_enable(&pdev->dev);
> >   	return 0;
> > -put_device:
> > -	put_device(pm->larbvdec);
> > -	return ret;
> >   }
> >   
> >   void mtk_vcodec_release_dec_pm(struct mtk_vcodec_dev *dev)
> >   {
> >   	pm_runtime_disable(dev->pm.dev);
> > -	put_device(dev->pm.larbvdec);
> >   }
> 
> Now that functions only do  'pm_runtime_disable(dev->pm.dev);' so it
> will be more
> readable to remove the function mtk_vcodec_release_dec_pm
> and replace with pm_runtime_disable(dev->pm.dev);
> Same for the 'enc' equivalent.

Make sense. But It may be not proper if using pm_runtime_disable
as the symmetry with mtk_vcodec_init_dec_pm in the mtk_vcodec_probe.

Maybe we should move pm_runtime_enable out from mtk_vcodec_init_dec_pm
into mtk_vcodec_probe. I could do a new patch for this. Is this ok for
you?

> 
> Thanks,
> Dafna

[snip]
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 09/12] media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
@ 2021-09-30  3:28       ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-30  3:28 UTC (permalink / raw)
  To: Dafna Hirschfeld, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, youlin.pei, Matthias Kaehlcke, anan.sun,
	yi.kuo, acourbot, linux-media, dri-devel, Daniel Vetter,
	Chun-Kuang Hu, Philipp Zabel, Tiffany Lin, Hsin-Yi Wang,
	Eizan Miyamoto, anthony.huang, Frank Wunderlich, Irui Wang

Hi Dafna,

Thanks very much for the review.

On Wed, 2021-09-29 at 14:13 +0200, Dafna Hirschfeld wrote:
> 
> On 29.09.21 03:37, Yong Wu wrote:
> > MediaTek IOMMU has already added the device_link between the
> > consumer
> > and smi-larb device. If the vcodec device call the
> > pm_runtime_get_sync,
> > the smi-larb's pm_runtime_get_sync also be called automatically.
> > 
> > CC: Tiffany Lin <tiffany.lin@mediatek.com>
> > CC: Irui Wang <irui.wang@mediatek.com>
> > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > Reviewed-by: Evan Green <evgreen@chromium.org>
> > Acked-by: Tiffany Lin <tiffany.lin@mediatek.com>
> > Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
> > ---
> >   .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c   | 37 +++-----------
> > --
> >   .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  3 --
> >   .../platform/mtk-vcodec/mtk_vcodec_enc.c      |  1 -
> >   .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c   | 44 +++-----------
> > -----
> >   4 files changed, 10 insertions(+), 75 deletions(-)
> > 
> > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> > b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> > index 6038db96f71c..d0bf9aa3b29d 100644
> > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> > @@ -8,14 +8,12 @@
> >   #include <linux/of_address.h>
> >   #include <linux/of_platform.h>
> >   #include <linux/pm_runtime.h>
> > -#include <soc/mediatek/smi.h>
> >   
> >   #include "mtk_vcodec_dec_pm.h"
> >   #include "mtk_vcodec_util.h"
> >   
> >   int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
> >   {
> > -	struct device_node *node;
> >   	struct platform_device *pdev;
> >   	struct mtk_vcodec_pm *pm;
> >   	struct mtk_vcodec_clk *dec_clk;
> > @@ -26,18 +24,7 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev
> > *mtkdev)
> >   	pm = &mtkdev->pm;
> >   	pm->mtkdev = mtkdev;
> >   	dec_clk = &pm->vdec_clk;
> > -	node = of_parse_phandle(pdev->dev.of_node, "mediatek,larb", 0);
> > -	if (!node) {
> > -		mtk_v4l2_err("of_parse_phandle mediatek,larb fail!");
> > -		return -1;
> > -	}
> >   
> > -	pdev = of_find_device_by_node(node);
> > -	of_node_put(node);
> > -	if (WARN_ON(!pdev)) {
> > -		return -1;
> > -	}
> > -	pm->larbvdec = &pdev->dev;
> >   	pdev = mtkdev->plat_dev;
> >   	pm->dev = &pdev->dev;
> >   
> > @@ -47,14 +34,11 @@ int mtk_vcodec_init_dec_pm(struct
> > mtk_vcodec_dev *mtkdev)
> >   		dec_clk->clk_info = devm_kcalloc(&pdev->dev,
> >   			dec_clk->clk_num, sizeof(*clk_info),
> >   			GFP_KERNEL);
> > -		if (!dec_clk->clk_info) {
> > -			ret = -ENOMEM;
> > -			goto put_device;
> > -		}
> > +		if (!dec_clk->clk_info)
> > +			return -ENOMEM;
> >   	} else {
> >   		mtk_v4l2_err("Failed to get vdec clock count");
> > -		ret = -EINVAL;
> > -		goto put_device;
> > +		return -EINVAL;
> >   	}
> >   
> >   	for (i = 0; i < dec_clk->clk_num; i++) {
> > @@ -63,29 +47,24 @@ int mtk_vcodec_init_dec_pm(struct
> > mtk_vcodec_dev *mtkdev)
> >   			"clock-names", i, &clk_info->clk_name);
> >   		if (ret) {
> >   			mtk_v4l2_err("Failed to get clock name id =
> > %d", i);
> > -			goto put_device;
> > +			return ret;
> >   		}
> >   		clk_info->vcodec_clk = devm_clk_get(&pdev->dev,
> >   			clk_info->clk_name);
> >   		if (IS_ERR(clk_info->vcodec_clk)) {
> >   			mtk_v4l2_err("devm_clk_get (%d)%s fail", i,
> >   				clk_info->clk_name);
> > -			ret = PTR_ERR(clk_info->vcodec_clk);
> > -			goto put_device;
> > +			return PTR_ERR(clk_info->vcodec_clk);
> >   		}
> >   	}
> >   
> >   	pm_runtime_enable(&pdev->dev);
> >   	return 0;
> > -put_device:
> > -	put_device(pm->larbvdec);
> > -	return ret;
> >   }
> >   
> >   void mtk_vcodec_release_dec_pm(struct mtk_vcodec_dev *dev)
> >   {
> >   	pm_runtime_disable(dev->pm.dev);
> > -	put_device(dev->pm.larbvdec);
> >   }
> 
> Now that functions only do  'pm_runtime_disable(dev->pm.dev);' so it
> will be more
> readable to remove the function mtk_vcodec_release_dec_pm
> and replace with pm_runtime_disable(dev->pm.dev);
> Same for the 'enc' equivalent.

Make sense. But It may be not proper if using pm_runtime_disable
as the symmetry with mtk_vcodec_init_dec_pm in the mtk_vcodec_probe.

Maybe we should move pm_runtime_enable out from mtk_vcodec_init_dec_pm
into mtk_vcodec_probe. I could do a new patch for this. Is this ok for
you?

> 
> Thanks,
> Dafna

[snip]
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 09/12] media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
@ 2021-09-30  3:28       ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-30  3:28 UTC (permalink / raw)
  To: Dafna Hirschfeld, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, youlin.pei, Matthias Kaehlcke, anan.sun,
	yi.kuo, acourbot, linux-media, dri-devel, Daniel Vetter,
	Chun-Kuang Hu, Philipp Zabel, Tiffany Lin, Hsin-Yi Wang,
	Eizan Miyamoto, anthony.huang, Frank Wunderlich, Irui Wang

Hi Dafna,

Thanks very much for the review.

On Wed, 2021-09-29 at 14:13 +0200, Dafna Hirschfeld wrote:
> 
> On 29.09.21 03:37, Yong Wu wrote:
> > MediaTek IOMMU has already added the device_link between the
> > consumer
> > and smi-larb device. If the vcodec device call the
> > pm_runtime_get_sync,
> > the smi-larb's pm_runtime_get_sync also be called automatically.
> > 
> > CC: Tiffany Lin <tiffany.lin@mediatek.com>
> > CC: Irui Wang <irui.wang@mediatek.com>
> > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > Reviewed-by: Evan Green <evgreen@chromium.org>
> > Acked-by: Tiffany Lin <tiffany.lin@mediatek.com>
> > Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
> > ---
> >   .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c   | 37 +++-----------
> > --
> >   .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  3 --
> >   .../platform/mtk-vcodec/mtk_vcodec_enc.c      |  1 -
> >   .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c   | 44 +++-----------
> > -----
> >   4 files changed, 10 insertions(+), 75 deletions(-)
> > 
> > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> > b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> > index 6038db96f71c..d0bf9aa3b29d 100644
> > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> > @@ -8,14 +8,12 @@
> >   #include <linux/of_address.h>
> >   #include <linux/of_platform.h>
> >   #include <linux/pm_runtime.h>
> > -#include <soc/mediatek/smi.h>
> >   
> >   #include "mtk_vcodec_dec_pm.h"
> >   #include "mtk_vcodec_util.h"
> >   
> >   int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
> >   {
> > -	struct device_node *node;
> >   	struct platform_device *pdev;
> >   	struct mtk_vcodec_pm *pm;
> >   	struct mtk_vcodec_clk *dec_clk;
> > @@ -26,18 +24,7 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev
> > *mtkdev)
> >   	pm = &mtkdev->pm;
> >   	pm->mtkdev = mtkdev;
> >   	dec_clk = &pm->vdec_clk;
> > -	node = of_parse_phandle(pdev->dev.of_node, "mediatek,larb", 0);
> > -	if (!node) {
> > -		mtk_v4l2_err("of_parse_phandle mediatek,larb fail!");
> > -		return -1;
> > -	}
> >   
> > -	pdev = of_find_device_by_node(node);
> > -	of_node_put(node);
> > -	if (WARN_ON(!pdev)) {
> > -		return -1;
> > -	}
> > -	pm->larbvdec = &pdev->dev;
> >   	pdev = mtkdev->plat_dev;
> >   	pm->dev = &pdev->dev;
> >   
> > @@ -47,14 +34,11 @@ int mtk_vcodec_init_dec_pm(struct
> > mtk_vcodec_dev *mtkdev)
> >   		dec_clk->clk_info = devm_kcalloc(&pdev->dev,
> >   			dec_clk->clk_num, sizeof(*clk_info),
> >   			GFP_KERNEL);
> > -		if (!dec_clk->clk_info) {
> > -			ret = -ENOMEM;
> > -			goto put_device;
> > -		}
> > +		if (!dec_clk->clk_info)
> > +			return -ENOMEM;
> >   	} else {
> >   		mtk_v4l2_err("Failed to get vdec clock count");
> > -		ret = -EINVAL;
> > -		goto put_device;
> > +		return -EINVAL;
> >   	}
> >   
> >   	for (i = 0; i < dec_clk->clk_num; i++) {
> > @@ -63,29 +47,24 @@ int mtk_vcodec_init_dec_pm(struct
> > mtk_vcodec_dev *mtkdev)
> >   			"clock-names", i, &clk_info->clk_name);
> >   		if (ret) {
> >   			mtk_v4l2_err("Failed to get clock name id =
> > %d", i);
> > -			goto put_device;
> > +			return ret;
> >   		}
> >   		clk_info->vcodec_clk = devm_clk_get(&pdev->dev,
> >   			clk_info->clk_name);
> >   		if (IS_ERR(clk_info->vcodec_clk)) {
> >   			mtk_v4l2_err("devm_clk_get (%d)%s fail", i,
> >   				clk_info->clk_name);
> > -			ret = PTR_ERR(clk_info->vcodec_clk);
> > -			goto put_device;
> > +			return PTR_ERR(clk_info->vcodec_clk);
> >   		}
> >   	}
> >   
> >   	pm_runtime_enable(&pdev->dev);
> >   	return 0;
> > -put_device:
> > -	put_device(pm->larbvdec);
> > -	return ret;
> >   }
> >   
> >   void mtk_vcodec_release_dec_pm(struct mtk_vcodec_dev *dev)
> >   {
> >   	pm_runtime_disable(dev->pm.dev);
> > -	put_device(dev->pm.larbvdec);
> >   }
> 
> Now that functions only do  'pm_runtime_disable(dev->pm.dev);' so it
> will be more
> readable to remove the function mtk_vcodec_release_dec_pm
> and replace with pm_runtime_disable(dev->pm.dev);
> Same for the 'enc' equivalent.

Make sense. But It may be not proper if using pm_runtime_disable
as the symmetry with mtk_vcodec_init_dec_pm in the mtk_vcodec_probe.

Maybe we should move pm_runtime_enable out from mtk_vcodec_init_dec_pm
into mtk_vcodec_probe. I could do a new patch for this. Is this ok for
you?

> 
> Thanks,
> Dafna

[snip]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 03/12] iommu/mediatek: Add probe_defer for smi-larb
  2021-09-29 16:33     ` Dafna Hirschfeld
  (?)
  (?)
@ 2021-09-30  7:14       ` Yong Wu
  -1 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-30  7:14 UTC (permalink / raw)
  To: Dafna Hirschfeld, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, youlin.pei, Matthias Kaehlcke, anan.sun,
	yi.kuo, acourbot, linux-media, dri-devel, Daniel Vetter,
	Chun-Kuang Hu, Philipp Zabel, Tiffany Lin, Hsin-Yi Wang,
	Eizan Miyamoto, anthony.huang, Frank Wunderlich

On Wed, 2021-09-29 at 18:33 +0200, Dafna Hirschfeld wrote:
> 
> On 29.09.21 03:37, Yong Wu wrote:
> > Prepare for adding device_link.
> > 
> > The iommu consumer should use device_link to connect with the
> > smi-larb(supplier). then the smi-larb should run before the iommu
> > consumer. Here we delay the iommu driver until the smi driver is
> > ready,
> > then all the iommu consumers always are after the smi driver.
> > 
> > When there is no this patch, if some consumer drivers run before
> > smi-larb, the supplier link_status is DL_DEV_NO_DRIVER(0) in the
> > device_link_add, then device_links_driver_bound will use WARN_ON
> > to complain that the link_status of supplier is not right.
> > 
> > device_is_bound may be more elegant here. but it is not allowed to
> > EXPORT from https://lore.kernel.org/patchwork/patch/1334670/.
> > 
> > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-
> > R2/MT7623
> > ---
> >   drivers/iommu/mtk_iommu.c    | 2 +-
> >   drivers/iommu/mtk_iommu_v1.c | 2 +-
> >   2 files changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> > index d837adfd1da5..d5848f78a677 100644
> > --- a/drivers/iommu/mtk_iommu.c
> > +++ b/drivers/iommu/mtk_iommu.c
> > @@ -844,7 +844,7 @@ static int mtk_iommu_probe(struct
> > platform_device *pdev)
> >   			id = i;
> >   
> >   		plarbdev = of_find_device_by_node(larbnode);
> > -		if (!plarbdev) {
> > +		if (!plarbdev || !plarbdev->dev.driver) {
> >   			of_node_put(larbnode);
> >   			return -EPROBE_DEFER;
> 
> if plarbdev is null doesn't that mean that the device does not exist?

This is probe function, Is it possible the platform device is not ready
at this time?

I checked the platform device should be created at:

of_platform_default_populate_init:  arch_initcall_sync
  ->of_platform_populate
      ->of_platform_device_create_pdata

Not sure if this may be delayed for some device. If not, it should be
ENODEV here.

> so we should return -ENODEV in that case?
> 
> thanks,
> Dafna
> 
> >   		}
> > diff --git a/drivers/iommu/mtk_iommu_v1.c
> > b/drivers/iommu/mtk_iommu_v1.c
> > index 1467ba1e4417..4d7809432239 100644
> > --- a/drivers/iommu/mtk_iommu_v1.c
> > +++ b/drivers/iommu/mtk_iommu_v1.c
> > @@ -602,7 +602,7 @@ static int mtk_iommu_probe(struct
> > platform_device *pdev)
> >   		}
> >   
> >   		plarbdev = of_find_device_by_node(larbnode);
> > -		if (!plarbdev) {
> > +		if (!plarbdev || !plarbdev->dev.driver) {
> >   			of_node_put(larbnode);
> >   			return -EPROBE_DEFER;
> >   		}
> > 
> 
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 03/12] iommu/mediatek: Add probe_defer for smi-larb
@ 2021-09-30  7:14       ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-30  7:14 UTC (permalink / raw)
  To: Dafna Hirschfeld, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Chun-Kuang Hu, Will Deacon, dri-devel, anthony.huang, youlin.pei,
	Evan Green, Eizan Miyamoto, Matthias Kaehlcke, linux-media,
	devicetree, Philipp Zabel, Frank Wunderlich, yi.kuo,
	linux-mediatek, Hsin-Yi Wang, Tiffany Lin, linux-arm-kernel,
	anan.sun, srv_heupstream, acourbot, linux-kernel, iommu,
	Daniel Vetter, Robin Murphy

On Wed, 2021-09-29 at 18:33 +0200, Dafna Hirschfeld wrote:
> 
> On 29.09.21 03:37, Yong Wu wrote:
> > Prepare for adding device_link.
> > 
> > The iommu consumer should use device_link to connect with the
> > smi-larb(supplier). then the smi-larb should run before the iommu
> > consumer. Here we delay the iommu driver until the smi driver is
> > ready,
> > then all the iommu consumers always are after the smi driver.
> > 
> > When there is no this patch, if some consumer drivers run before
> > smi-larb, the supplier link_status is DL_DEV_NO_DRIVER(0) in the
> > device_link_add, then device_links_driver_bound will use WARN_ON
> > to complain that the link_status of supplier is not right.
> > 
> > device_is_bound may be more elegant here. but it is not allowed to
> > EXPORT from https://lore.kernel.org/patchwork/patch/1334670/.
> > 
> > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-
> > R2/MT7623
> > ---
> >   drivers/iommu/mtk_iommu.c    | 2 +-
> >   drivers/iommu/mtk_iommu_v1.c | 2 +-
> >   2 files changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> > index d837adfd1da5..d5848f78a677 100644
> > --- a/drivers/iommu/mtk_iommu.c
> > +++ b/drivers/iommu/mtk_iommu.c
> > @@ -844,7 +844,7 @@ static int mtk_iommu_probe(struct
> > platform_device *pdev)
> >   			id = i;
> >   
> >   		plarbdev = of_find_device_by_node(larbnode);
> > -		if (!plarbdev) {
> > +		if (!plarbdev || !plarbdev->dev.driver) {
> >   			of_node_put(larbnode);
> >   			return -EPROBE_DEFER;
> 
> if plarbdev is null doesn't that mean that the device does not exist?

This is probe function, Is it possible the platform device is not ready
at this time?

I checked the platform device should be created at:

of_platform_default_populate_init:  arch_initcall_sync
  ->of_platform_populate
      ->of_platform_device_create_pdata

Not sure if this may be delayed for some device. If not, it should be
ENODEV here.

> so we should return -ENODEV in that case?
> 
> thanks,
> Dafna
> 
> >   		}
> > diff --git a/drivers/iommu/mtk_iommu_v1.c
> > b/drivers/iommu/mtk_iommu_v1.c
> > index 1467ba1e4417..4d7809432239 100644
> > --- a/drivers/iommu/mtk_iommu_v1.c
> > +++ b/drivers/iommu/mtk_iommu_v1.c
> > @@ -602,7 +602,7 @@ static int mtk_iommu_probe(struct
> > platform_device *pdev)
> >   		}
> >   
> >   		plarbdev = of_find_device_by_node(larbnode);
> > -		if (!plarbdev) {
> > +		if (!plarbdev || !plarbdev->dev.driver) {
> >   			of_node_put(larbnode);
> >   			return -EPROBE_DEFER;
> >   		}
> > 
> 
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 03/12] iommu/mediatek: Add probe_defer for smi-larb
@ 2021-09-30  7:14       ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-30  7:14 UTC (permalink / raw)
  To: Dafna Hirschfeld, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, youlin.pei, Matthias Kaehlcke, anan.sun,
	yi.kuo, acourbot, linux-media, dri-devel, Daniel Vetter,
	Chun-Kuang Hu, Philipp Zabel, Tiffany Lin, Hsin-Yi Wang,
	Eizan Miyamoto, anthony.huang, Frank Wunderlich

On Wed, 2021-09-29 at 18:33 +0200, Dafna Hirschfeld wrote:
> 
> On 29.09.21 03:37, Yong Wu wrote:
> > Prepare for adding device_link.
> > 
> > The iommu consumer should use device_link to connect with the
> > smi-larb(supplier). then the smi-larb should run before the iommu
> > consumer. Here we delay the iommu driver until the smi driver is
> > ready,
> > then all the iommu consumers always are after the smi driver.
> > 
> > When there is no this patch, if some consumer drivers run before
> > smi-larb, the supplier link_status is DL_DEV_NO_DRIVER(0) in the
> > device_link_add, then device_links_driver_bound will use WARN_ON
> > to complain that the link_status of supplier is not right.
> > 
> > device_is_bound may be more elegant here. but it is not allowed to
> > EXPORT from https://lore.kernel.org/patchwork/patch/1334670/.
> > 
> > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-
> > R2/MT7623
> > ---
> >   drivers/iommu/mtk_iommu.c    | 2 +-
> >   drivers/iommu/mtk_iommu_v1.c | 2 +-
> >   2 files changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> > index d837adfd1da5..d5848f78a677 100644
> > --- a/drivers/iommu/mtk_iommu.c
> > +++ b/drivers/iommu/mtk_iommu.c
> > @@ -844,7 +844,7 @@ static int mtk_iommu_probe(struct
> > platform_device *pdev)
> >   			id = i;
> >   
> >   		plarbdev = of_find_device_by_node(larbnode);
> > -		if (!plarbdev) {
> > +		if (!plarbdev || !plarbdev->dev.driver) {
> >   			of_node_put(larbnode);
> >   			return -EPROBE_DEFER;
> 
> if plarbdev is null doesn't that mean that the device does not exist?

This is probe function, Is it possible the platform device is not ready
at this time?

I checked the platform device should be created at:

of_platform_default_populate_init:  arch_initcall_sync
  ->of_platform_populate
      ->of_platform_device_create_pdata

Not sure if this may be delayed for some device. If not, it should be
ENODEV here.

> so we should return -ENODEV in that case?
> 
> thanks,
> Dafna
> 
> >   		}
> > diff --git a/drivers/iommu/mtk_iommu_v1.c
> > b/drivers/iommu/mtk_iommu_v1.c
> > index 1467ba1e4417..4d7809432239 100644
> > --- a/drivers/iommu/mtk_iommu_v1.c
> > +++ b/drivers/iommu/mtk_iommu_v1.c
> > @@ -602,7 +602,7 @@ static int mtk_iommu_probe(struct
> > platform_device *pdev)
> >   		}
> >   
> >   		plarbdev = of_find_device_by_node(larbnode);
> > -		if (!plarbdev) {
> > +		if (!plarbdev || !plarbdev->dev.driver) {
> >   			of_node_put(larbnode);
> >   			return -EPROBE_DEFER;
> >   		}
> > 
> 
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 03/12] iommu/mediatek: Add probe_defer for smi-larb
@ 2021-09-30  7:14       ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-09-30  7:14 UTC (permalink / raw)
  To: Dafna Hirschfeld, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, youlin.pei, Matthias Kaehlcke, anan.sun,
	yi.kuo, acourbot, linux-media, dri-devel, Daniel Vetter,
	Chun-Kuang Hu, Philipp Zabel, Tiffany Lin, Hsin-Yi Wang,
	Eizan Miyamoto, anthony.huang, Frank Wunderlich

On Wed, 2021-09-29 at 18:33 +0200, Dafna Hirschfeld wrote:
> 
> On 29.09.21 03:37, Yong Wu wrote:
> > Prepare for adding device_link.
> > 
> > The iommu consumer should use device_link to connect with the
> > smi-larb(supplier). then the smi-larb should run before the iommu
> > consumer. Here we delay the iommu driver until the smi driver is
> > ready,
> > then all the iommu consumers always are after the smi driver.
> > 
> > When there is no this patch, if some consumer drivers run before
> > smi-larb, the supplier link_status is DL_DEV_NO_DRIVER(0) in the
> > device_link_add, then device_links_driver_bound will use WARN_ON
> > to complain that the link_status of supplier is not right.
> > 
> > device_is_bound may be more elegant here. but it is not allowed to
> > EXPORT from https://lore.kernel.org/patchwork/patch/1334670/.
> > 
> > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-
> > R2/MT7623
> > ---
> >   drivers/iommu/mtk_iommu.c    | 2 +-
> >   drivers/iommu/mtk_iommu_v1.c | 2 +-
> >   2 files changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> > index d837adfd1da5..d5848f78a677 100644
> > --- a/drivers/iommu/mtk_iommu.c
> > +++ b/drivers/iommu/mtk_iommu.c
> > @@ -844,7 +844,7 @@ static int mtk_iommu_probe(struct
> > platform_device *pdev)
> >   			id = i;
> >   
> >   		plarbdev = of_find_device_by_node(larbnode);
> > -		if (!plarbdev) {
> > +		if (!plarbdev || !plarbdev->dev.driver) {
> >   			of_node_put(larbnode);
> >   			return -EPROBE_DEFER;
> 
> if plarbdev is null doesn't that mean that the device does not exist?

This is probe function, Is it possible the platform device is not ready
at this time?

I checked the platform device should be created at:

of_platform_default_populate_init:  arch_initcall_sync
  ->of_platform_populate
      ->of_platform_device_create_pdata

Not sure if this may be delayed for some device. If not, it should be
ENODEV here.

> so we should return -ENODEV in that case?
> 
> thanks,
> Dafna
> 
> >   		}
> > diff --git a/drivers/iommu/mtk_iommu_v1.c
> > b/drivers/iommu/mtk_iommu_v1.c
> > index 1467ba1e4417..4d7809432239 100644
> > --- a/drivers/iommu/mtk_iommu_v1.c
> > +++ b/drivers/iommu/mtk_iommu_v1.c
> > @@ -602,7 +602,7 @@ static int mtk_iommu_probe(struct
> > platform_device *pdev)
> >   		}
> >   
> >   		plarbdev = of_find_device_by_node(larbnode);
> > -		if (!plarbdev) {
> > +		if (!plarbdev || !plarbdev->dev.driver) {
> >   			of_node_put(larbnode);
> >   			return -EPROBE_DEFER;
> >   		}
> > 
> 
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 09/12] media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
  2021-09-30  3:28       ` Yong Wu
  (?)
  (?)
@ 2021-09-30 10:57         ` Dafna Hirschfeld
  -1 siblings, 0 replies; 105+ messages in thread
From: Dafna Hirschfeld @ 2021-09-30 10:57 UTC (permalink / raw)
  To: Yong Wu, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, youlin.pei, Matthias Kaehlcke, anan.sun,
	yi.kuo, acourbot, linux-media, dri-devel, Daniel Vetter,
	Chun-Kuang Hu, Philipp Zabel, Tiffany Lin, Hsin-Yi Wang,
	Eizan Miyamoto, anthony.huang, Frank Wunderlich, Irui Wang



On 30.09.21 05:28, Yong Wu wrote:
> Hi Dafna,
> 
> Thanks very much for the review.
> 
> On Wed, 2021-09-29 at 14:13 +0200, Dafna Hirschfeld wrote:
>>
>> On 29.09.21 03:37, Yong Wu wrote:
>>> MediaTek IOMMU has already added the device_link between the
>>> consumer
>>> and smi-larb device. If the vcodec device call the
>>> pm_runtime_get_sync,
>>> the smi-larb's pm_runtime_get_sync also be called automatically.
>>>
>>> CC: Tiffany Lin <tiffany.lin@mediatek.com>
>>> CC: Irui Wang <irui.wang@mediatek.com>
>>> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
>>> Reviewed-by: Evan Green <evgreen@chromium.org>
>>> Acked-by: Tiffany Lin <tiffany.lin@mediatek.com>
>>> Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
>>> ---
>>>    .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c   | 37 +++-----------
>>> --
>>>    .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  3 --
>>>    .../platform/mtk-vcodec/mtk_vcodec_enc.c      |  1 -
>>>    .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c   | 44 +++-----------
>>> -----
>>>    4 files changed, 10 insertions(+), 75 deletions(-)
>>>
>>> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
>>> b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
>>> index 6038db96f71c..d0bf9aa3b29d 100644
>>> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
>>> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
>>> @@ -8,14 +8,12 @@
>>>    #include <linux/of_address.h>
>>>    #include <linux/of_platform.h>
>>>    #include <linux/pm_runtime.h>
>>> -#include <soc/mediatek/smi.h>
>>>    
>>>    #include "mtk_vcodec_dec_pm.h"
>>>    #include "mtk_vcodec_util.h"
>>>    
>>>    int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
>>>    {
>>> -	struct device_node *node;
>>>    	struct platform_device *pdev;
>>>    	struct mtk_vcodec_pm *pm;
>>>    	struct mtk_vcodec_clk *dec_clk;
>>> @@ -26,18 +24,7 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev
>>> *mtkdev)
>>>    	pm = &mtkdev->pm;
>>>    	pm->mtkdev = mtkdev;
>>>    	dec_clk = &pm->vdec_clk;
>>> -	node = of_parse_phandle(pdev->dev.of_node, "mediatek,larb", 0);
>>> -	if (!node) {
>>> -		mtk_v4l2_err("of_parse_phandle mediatek,larb fail!");
>>> -		return -1;
>>> -	}
>>>    
>>> -	pdev = of_find_device_by_node(node);
>>> -	of_node_put(node);
>>> -	if (WARN_ON(!pdev)) {
>>> -		return -1;
>>> -	}
>>> -	pm->larbvdec = &pdev->dev;
>>>    	pdev = mtkdev->plat_dev;
>>>    	pm->dev = &pdev->dev;
>>>    
>>> @@ -47,14 +34,11 @@ int mtk_vcodec_init_dec_pm(struct
>>> mtk_vcodec_dev *mtkdev)
>>>    		dec_clk->clk_info = devm_kcalloc(&pdev->dev,
>>>    			dec_clk->clk_num, sizeof(*clk_info),
>>>    			GFP_KERNEL);
>>> -		if (!dec_clk->clk_info) {
>>> -			ret = -ENOMEM;
>>> -			goto put_device;
>>> -		}
>>> +		if (!dec_clk->clk_info)
>>> +			return -ENOMEM;
>>>    	} else {
>>>    		mtk_v4l2_err("Failed to get vdec clock count");
>>> -		ret = -EINVAL;
>>> -		goto put_device;
>>> +		return -EINVAL;
>>>    	}
>>>    
>>>    	for (i = 0; i < dec_clk->clk_num; i++) {
>>> @@ -63,29 +47,24 @@ int mtk_vcodec_init_dec_pm(struct
>>> mtk_vcodec_dev *mtkdev)
>>>    			"clock-names", i, &clk_info->clk_name);
>>>    		if (ret) {
>>>    			mtk_v4l2_err("Failed to get clock name id =
>>> %d", i);
>>> -			goto put_device;
>>> +			return ret;
>>>    		}
>>>    		clk_info->vcodec_clk = devm_clk_get(&pdev->dev,
>>>    			clk_info->clk_name);
>>>    		if (IS_ERR(clk_info->vcodec_clk)) {
>>>    			mtk_v4l2_err("devm_clk_get (%d)%s fail", i,
>>>    				clk_info->clk_name);
>>> -			ret = PTR_ERR(clk_info->vcodec_clk);
>>> -			goto put_device;
>>> +			return PTR_ERR(clk_info->vcodec_clk);
>>>    		}
>>>    	}
>>>    
>>>    	pm_runtime_enable(&pdev->dev);
>>>    	return 0;
>>> -put_device:
>>> -	put_device(pm->larbvdec);
>>> -	return ret;
>>>    }
>>>    
>>>    void mtk_vcodec_release_dec_pm(struct mtk_vcodec_dev *dev)
>>>    {
>>>    	pm_runtime_disable(dev->pm.dev);
>>> -	put_device(dev->pm.larbvdec);
>>>    }
>>
>> Now that functions only do  'pm_runtime_disable(dev->pm.dev);' so it
>> will be more
>> readable to remove the function mtk_vcodec_release_dec_pm
>> and replace with pm_runtime_disable(dev->pm.dev);
>> Same for the 'enc' equivalent.
> 
> Make sense. But It may be not proper if using pm_runtime_disable
> as the symmetry with mtk_vcodec_init_dec_pm in the mtk_vcodec_probe.
> 
> Maybe we should move pm_runtime_enable out from mtk_vcodec_init_dec_pm
> into mtk_vcodec_probe. I could do a new patch for this. Is this ok for
> you?

yes, there is also asymettry when calling pm_runtime* in general,
I see in the decoder it is called from mtk_vcodec_dec_pm.c
but in the encoder it is called from mtk_vcodec_enc.c,

I think all calls to pm_runtime* should be out of the *_pm.c files
since for example 'mtk_vcodec_dec_pw_on' also do just one call to
pm_runtime_resume_and_get so this function can also be removed.

thanks,
Dafna

> 
>>
>> Thanks,
>> Dafna
> 
> [snip]
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
> 

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 09/12] media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
@ 2021-09-30 10:57         ` Dafna Hirschfeld
  0 siblings, 0 replies; 105+ messages in thread
From: Dafna Hirschfeld @ 2021-09-30 10:57 UTC (permalink / raw)
  To: Yong Wu, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Chun-Kuang Hu, Will Deacon, dri-devel, anthony.huang, youlin.pei,
	Irui Wang, Evan Green, Eizan Miyamoto, Matthias Kaehlcke,
	linux-media, devicetree, Philipp Zabel, Frank Wunderlich, yi.kuo,
	linux-mediatek, Hsin-Yi Wang, Tiffany Lin, linux-arm-kernel,
	anan.sun, srv_heupstream, acourbot, linux-kernel, iommu,
	Daniel Vetter, Robin Murphy



On 30.09.21 05:28, Yong Wu wrote:
> Hi Dafna,
> 
> Thanks very much for the review.
> 
> On Wed, 2021-09-29 at 14:13 +0200, Dafna Hirschfeld wrote:
>>
>> On 29.09.21 03:37, Yong Wu wrote:
>>> MediaTek IOMMU has already added the device_link between the
>>> consumer
>>> and smi-larb device. If the vcodec device call the
>>> pm_runtime_get_sync,
>>> the smi-larb's pm_runtime_get_sync also be called automatically.
>>>
>>> CC: Tiffany Lin <tiffany.lin@mediatek.com>
>>> CC: Irui Wang <irui.wang@mediatek.com>
>>> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
>>> Reviewed-by: Evan Green <evgreen@chromium.org>
>>> Acked-by: Tiffany Lin <tiffany.lin@mediatek.com>
>>> Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
>>> ---
>>>    .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c   | 37 +++-----------
>>> --
>>>    .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  3 --
>>>    .../platform/mtk-vcodec/mtk_vcodec_enc.c      |  1 -
>>>    .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c   | 44 +++-----------
>>> -----
>>>    4 files changed, 10 insertions(+), 75 deletions(-)
>>>
>>> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
>>> b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
>>> index 6038db96f71c..d0bf9aa3b29d 100644
>>> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
>>> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
>>> @@ -8,14 +8,12 @@
>>>    #include <linux/of_address.h>
>>>    #include <linux/of_platform.h>
>>>    #include <linux/pm_runtime.h>
>>> -#include <soc/mediatek/smi.h>
>>>    
>>>    #include "mtk_vcodec_dec_pm.h"
>>>    #include "mtk_vcodec_util.h"
>>>    
>>>    int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
>>>    {
>>> -	struct device_node *node;
>>>    	struct platform_device *pdev;
>>>    	struct mtk_vcodec_pm *pm;
>>>    	struct mtk_vcodec_clk *dec_clk;
>>> @@ -26,18 +24,7 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev
>>> *mtkdev)
>>>    	pm = &mtkdev->pm;
>>>    	pm->mtkdev = mtkdev;
>>>    	dec_clk = &pm->vdec_clk;
>>> -	node = of_parse_phandle(pdev->dev.of_node, "mediatek,larb", 0);
>>> -	if (!node) {
>>> -		mtk_v4l2_err("of_parse_phandle mediatek,larb fail!");
>>> -		return -1;
>>> -	}
>>>    
>>> -	pdev = of_find_device_by_node(node);
>>> -	of_node_put(node);
>>> -	if (WARN_ON(!pdev)) {
>>> -		return -1;
>>> -	}
>>> -	pm->larbvdec = &pdev->dev;
>>>    	pdev = mtkdev->plat_dev;
>>>    	pm->dev = &pdev->dev;
>>>    
>>> @@ -47,14 +34,11 @@ int mtk_vcodec_init_dec_pm(struct
>>> mtk_vcodec_dev *mtkdev)
>>>    		dec_clk->clk_info = devm_kcalloc(&pdev->dev,
>>>    			dec_clk->clk_num, sizeof(*clk_info),
>>>    			GFP_KERNEL);
>>> -		if (!dec_clk->clk_info) {
>>> -			ret = -ENOMEM;
>>> -			goto put_device;
>>> -		}
>>> +		if (!dec_clk->clk_info)
>>> +			return -ENOMEM;
>>>    	} else {
>>>    		mtk_v4l2_err("Failed to get vdec clock count");
>>> -		ret = -EINVAL;
>>> -		goto put_device;
>>> +		return -EINVAL;
>>>    	}
>>>    
>>>    	for (i = 0; i < dec_clk->clk_num; i++) {
>>> @@ -63,29 +47,24 @@ int mtk_vcodec_init_dec_pm(struct
>>> mtk_vcodec_dev *mtkdev)
>>>    			"clock-names", i, &clk_info->clk_name);
>>>    		if (ret) {
>>>    			mtk_v4l2_err("Failed to get clock name id =
>>> %d", i);
>>> -			goto put_device;
>>> +			return ret;
>>>    		}
>>>    		clk_info->vcodec_clk = devm_clk_get(&pdev->dev,
>>>    			clk_info->clk_name);
>>>    		if (IS_ERR(clk_info->vcodec_clk)) {
>>>    			mtk_v4l2_err("devm_clk_get (%d)%s fail", i,
>>>    				clk_info->clk_name);
>>> -			ret = PTR_ERR(clk_info->vcodec_clk);
>>> -			goto put_device;
>>> +			return PTR_ERR(clk_info->vcodec_clk);
>>>    		}
>>>    	}
>>>    
>>>    	pm_runtime_enable(&pdev->dev);
>>>    	return 0;
>>> -put_device:
>>> -	put_device(pm->larbvdec);
>>> -	return ret;
>>>    }
>>>    
>>>    void mtk_vcodec_release_dec_pm(struct mtk_vcodec_dev *dev)
>>>    {
>>>    	pm_runtime_disable(dev->pm.dev);
>>> -	put_device(dev->pm.larbvdec);
>>>    }
>>
>> Now that functions only do  'pm_runtime_disable(dev->pm.dev);' so it
>> will be more
>> readable to remove the function mtk_vcodec_release_dec_pm
>> and replace with pm_runtime_disable(dev->pm.dev);
>> Same for the 'enc' equivalent.
> 
> Make sense. But It may be not proper if using pm_runtime_disable
> as the symmetry with mtk_vcodec_init_dec_pm in the mtk_vcodec_probe.
> 
> Maybe we should move pm_runtime_enable out from mtk_vcodec_init_dec_pm
> into mtk_vcodec_probe. I could do a new patch for this. Is this ok for
> you?

yes, there is also asymettry when calling pm_runtime* in general,
I see in the decoder it is called from mtk_vcodec_dec_pm.c
but in the encoder it is called from mtk_vcodec_enc.c,

I think all calls to pm_runtime* should be out of the *_pm.c files
since for example 'mtk_vcodec_dec_pw_on' also do just one call to
pm_runtime_resume_and_get so this function can also be removed.

thanks,
Dafna

> 
>>
>> Thanks,
>> Dafna
> 
> [snip]
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
> 
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 09/12] media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
@ 2021-09-30 10:57         ` Dafna Hirschfeld
  0 siblings, 0 replies; 105+ messages in thread
From: Dafna Hirschfeld @ 2021-09-30 10:57 UTC (permalink / raw)
  To: Yong Wu, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, youlin.pei, Matthias Kaehlcke, anan.sun,
	yi.kuo, acourbot, linux-media, dri-devel, Daniel Vetter,
	Chun-Kuang Hu, Philipp Zabel, Tiffany Lin, Hsin-Yi Wang,
	Eizan Miyamoto, anthony.huang, Frank Wunderlich, Irui Wang



On 30.09.21 05:28, Yong Wu wrote:
> Hi Dafna,
> 
> Thanks very much for the review.
> 
> On Wed, 2021-09-29 at 14:13 +0200, Dafna Hirschfeld wrote:
>>
>> On 29.09.21 03:37, Yong Wu wrote:
>>> MediaTek IOMMU has already added the device_link between the
>>> consumer
>>> and smi-larb device. If the vcodec device call the
>>> pm_runtime_get_sync,
>>> the smi-larb's pm_runtime_get_sync also be called automatically.
>>>
>>> CC: Tiffany Lin <tiffany.lin@mediatek.com>
>>> CC: Irui Wang <irui.wang@mediatek.com>
>>> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
>>> Reviewed-by: Evan Green <evgreen@chromium.org>
>>> Acked-by: Tiffany Lin <tiffany.lin@mediatek.com>
>>> Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
>>> ---
>>>    .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c   | 37 +++-----------
>>> --
>>>    .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  3 --
>>>    .../platform/mtk-vcodec/mtk_vcodec_enc.c      |  1 -
>>>    .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c   | 44 +++-----------
>>> -----
>>>    4 files changed, 10 insertions(+), 75 deletions(-)
>>>
>>> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
>>> b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
>>> index 6038db96f71c..d0bf9aa3b29d 100644
>>> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
>>> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
>>> @@ -8,14 +8,12 @@
>>>    #include <linux/of_address.h>
>>>    #include <linux/of_platform.h>
>>>    #include <linux/pm_runtime.h>
>>> -#include <soc/mediatek/smi.h>
>>>    
>>>    #include "mtk_vcodec_dec_pm.h"
>>>    #include "mtk_vcodec_util.h"
>>>    
>>>    int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
>>>    {
>>> -	struct device_node *node;
>>>    	struct platform_device *pdev;
>>>    	struct mtk_vcodec_pm *pm;
>>>    	struct mtk_vcodec_clk *dec_clk;
>>> @@ -26,18 +24,7 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev
>>> *mtkdev)
>>>    	pm = &mtkdev->pm;
>>>    	pm->mtkdev = mtkdev;
>>>    	dec_clk = &pm->vdec_clk;
>>> -	node = of_parse_phandle(pdev->dev.of_node, "mediatek,larb", 0);
>>> -	if (!node) {
>>> -		mtk_v4l2_err("of_parse_phandle mediatek,larb fail!");
>>> -		return -1;
>>> -	}
>>>    
>>> -	pdev = of_find_device_by_node(node);
>>> -	of_node_put(node);
>>> -	if (WARN_ON(!pdev)) {
>>> -		return -1;
>>> -	}
>>> -	pm->larbvdec = &pdev->dev;
>>>    	pdev = mtkdev->plat_dev;
>>>    	pm->dev = &pdev->dev;
>>>    
>>> @@ -47,14 +34,11 @@ int mtk_vcodec_init_dec_pm(struct
>>> mtk_vcodec_dev *mtkdev)
>>>    		dec_clk->clk_info = devm_kcalloc(&pdev->dev,
>>>    			dec_clk->clk_num, sizeof(*clk_info),
>>>    			GFP_KERNEL);
>>> -		if (!dec_clk->clk_info) {
>>> -			ret = -ENOMEM;
>>> -			goto put_device;
>>> -		}
>>> +		if (!dec_clk->clk_info)
>>> +			return -ENOMEM;
>>>    	} else {
>>>    		mtk_v4l2_err("Failed to get vdec clock count");
>>> -		ret = -EINVAL;
>>> -		goto put_device;
>>> +		return -EINVAL;
>>>    	}
>>>    
>>>    	for (i = 0; i < dec_clk->clk_num; i++) {
>>> @@ -63,29 +47,24 @@ int mtk_vcodec_init_dec_pm(struct
>>> mtk_vcodec_dev *mtkdev)
>>>    			"clock-names", i, &clk_info->clk_name);
>>>    		if (ret) {
>>>    			mtk_v4l2_err("Failed to get clock name id =
>>> %d", i);
>>> -			goto put_device;
>>> +			return ret;
>>>    		}
>>>    		clk_info->vcodec_clk = devm_clk_get(&pdev->dev,
>>>    			clk_info->clk_name);
>>>    		if (IS_ERR(clk_info->vcodec_clk)) {
>>>    			mtk_v4l2_err("devm_clk_get (%d)%s fail", i,
>>>    				clk_info->clk_name);
>>> -			ret = PTR_ERR(clk_info->vcodec_clk);
>>> -			goto put_device;
>>> +			return PTR_ERR(clk_info->vcodec_clk);
>>>    		}
>>>    	}
>>>    
>>>    	pm_runtime_enable(&pdev->dev);
>>>    	return 0;
>>> -put_device:
>>> -	put_device(pm->larbvdec);
>>> -	return ret;
>>>    }
>>>    
>>>    void mtk_vcodec_release_dec_pm(struct mtk_vcodec_dev *dev)
>>>    {
>>>    	pm_runtime_disable(dev->pm.dev);
>>> -	put_device(dev->pm.larbvdec);
>>>    }
>>
>> Now that functions only do  'pm_runtime_disable(dev->pm.dev);' so it
>> will be more
>> readable to remove the function mtk_vcodec_release_dec_pm
>> and replace with pm_runtime_disable(dev->pm.dev);
>> Same for the 'enc' equivalent.
> 
> Make sense. But It may be not proper if using pm_runtime_disable
> as the symmetry with mtk_vcodec_init_dec_pm in the mtk_vcodec_probe.
> 
> Maybe we should move pm_runtime_enable out from mtk_vcodec_init_dec_pm
> into mtk_vcodec_probe. I could do a new patch for this. Is this ok for
> you?

yes, there is also asymettry when calling pm_runtime* in general,
I see in the decoder it is called from mtk_vcodec_dec_pm.c
but in the encoder it is called from mtk_vcodec_enc.c,

I think all calls to pm_runtime* should be out of the *_pm.c files
since for example 'mtk_vcodec_dec_pw_on' also do just one call to
pm_runtime_resume_and_get so this function can also be removed.

thanks,
Dafna

> 
>>
>> Thanks,
>> Dafna
> 
> [snip]
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
> 

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 09/12] media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
@ 2021-09-30 10:57         ` Dafna Hirschfeld
  0 siblings, 0 replies; 105+ messages in thread
From: Dafna Hirschfeld @ 2021-09-30 10:57 UTC (permalink / raw)
  To: Yong Wu, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, youlin.pei, Matthias Kaehlcke, anan.sun,
	yi.kuo, acourbot, linux-media, dri-devel, Daniel Vetter,
	Chun-Kuang Hu, Philipp Zabel, Tiffany Lin, Hsin-Yi Wang,
	Eizan Miyamoto, anthony.huang, Frank Wunderlich, Irui Wang



On 30.09.21 05:28, Yong Wu wrote:
> Hi Dafna,
> 
> Thanks very much for the review.
> 
> On Wed, 2021-09-29 at 14:13 +0200, Dafna Hirschfeld wrote:
>>
>> On 29.09.21 03:37, Yong Wu wrote:
>>> MediaTek IOMMU has already added the device_link between the
>>> consumer
>>> and smi-larb device. If the vcodec device call the
>>> pm_runtime_get_sync,
>>> the smi-larb's pm_runtime_get_sync also be called automatically.
>>>
>>> CC: Tiffany Lin <tiffany.lin@mediatek.com>
>>> CC: Irui Wang <irui.wang@mediatek.com>
>>> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
>>> Reviewed-by: Evan Green <evgreen@chromium.org>
>>> Acked-by: Tiffany Lin <tiffany.lin@mediatek.com>
>>> Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
>>> ---
>>>    .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c   | 37 +++-----------
>>> --
>>>    .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  3 --
>>>    .../platform/mtk-vcodec/mtk_vcodec_enc.c      |  1 -
>>>    .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c   | 44 +++-----------
>>> -----
>>>    4 files changed, 10 insertions(+), 75 deletions(-)
>>>
>>> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
>>> b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
>>> index 6038db96f71c..d0bf9aa3b29d 100644
>>> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
>>> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
>>> @@ -8,14 +8,12 @@
>>>    #include <linux/of_address.h>
>>>    #include <linux/of_platform.h>
>>>    #include <linux/pm_runtime.h>
>>> -#include <soc/mediatek/smi.h>
>>>    
>>>    #include "mtk_vcodec_dec_pm.h"
>>>    #include "mtk_vcodec_util.h"
>>>    
>>>    int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
>>>    {
>>> -	struct device_node *node;
>>>    	struct platform_device *pdev;
>>>    	struct mtk_vcodec_pm *pm;
>>>    	struct mtk_vcodec_clk *dec_clk;
>>> @@ -26,18 +24,7 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev
>>> *mtkdev)
>>>    	pm = &mtkdev->pm;
>>>    	pm->mtkdev = mtkdev;
>>>    	dec_clk = &pm->vdec_clk;
>>> -	node = of_parse_phandle(pdev->dev.of_node, "mediatek,larb", 0);
>>> -	if (!node) {
>>> -		mtk_v4l2_err("of_parse_phandle mediatek,larb fail!");
>>> -		return -1;
>>> -	}
>>>    
>>> -	pdev = of_find_device_by_node(node);
>>> -	of_node_put(node);
>>> -	if (WARN_ON(!pdev)) {
>>> -		return -1;
>>> -	}
>>> -	pm->larbvdec = &pdev->dev;
>>>    	pdev = mtkdev->plat_dev;
>>>    	pm->dev = &pdev->dev;
>>>    
>>> @@ -47,14 +34,11 @@ int mtk_vcodec_init_dec_pm(struct
>>> mtk_vcodec_dev *mtkdev)
>>>    		dec_clk->clk_info = devm_kcalloc(&pdev->dev,
>>>    			dec_clk->clk_num, sizeof(*clk_info),
>>>    			GFP_KERNEL);
>>> -		if (!dec_clk->clk_info) {
>>> -			ret = -ENOMEM;
>>> -			goto put_device;
>>> -		}
>>> +		if (!dec_clk->clk_info)
>>> +			return -ENOMEM;
>>>    	} else {
>>>    		mtk_v4l2_err("Failed to get vdec clock count");
>>> -		ret = -EINVAL;
>>> -		goto put_device;
>>> +		return -EINVAL;
>>>    	}
>>>    
>>>    	for (i = 0; i < dec_clk->clk_num; i++) {
>>> @@ -63,29 +47,24 @@ int mtk_vcodec_init_dec_pm(struct
>>> mtk_vcodec_dev *mtkdev)
>>>    			"clock-names", i, &clk_info->clk_name);
>>>    		if (ret) {
>>>    			mtk_v4l2_err("Failed to get clock name id =
>>> %d", i);
>>> -			goto put_device;
>>> +			return ret;
>>>    		}
>>>    		clk_info->vcodec_clk = devm_clk_get(&pdev->dev,
>>>    			clk_info->clk_name);
>>>    		if (IS_ERR(clk_info->vcodec_clk)) {
>>>    			mtk_v4l2_err("devm_clk_get (%d)%s fail", i,
>>>    				clk_info->clk_name);
>>> -			ret = PTR_ERR(clk_info->vcodec_clk);
>>> -			goto put_device;
>>> +			return PTR_ERR(clk_info->vcodec_clk);
>>>    		}
>>>    	}
>>>    
>>>    	pm_runtime_enable(&pdev->dev);
>>>    	return 0;
>>> -put_device:
>>> -	put_device(pm->larbvdec);
>>> -	return ret;
>>>    }
>>>    
>>>    void mtk_vcodec_release_dec_pm(struct mtk_vcodec_dev *dev)
>>>    {
>>>    	pm_runtime_disable(dev->pm.dev);
>>> -	put_device(dev->pm.larbvdec);
>>>    }
>>
>> Now that functions only do  'pm_runtime_disable(dev->pm.dev);' so it
>> will be more
>> readable to remove the function mtk_vcodec_release_dec_pm
>> and replace with pm_runtime_disable(dev->pm.dev);
>> Same for the 'enc' equivalent.
> 
> Make sense. But It may be not proper if using pm_runtime_disable
> as the symmetry with mtk_vcodec_init_dec_pm in the mtk_vcodec_probe.
> 
> Maybe we should move pm_runtime_enable out from mtk_vcodec_init_dec_pm
> into mtk_vcodec_probe. I could do a new patch for this. Is this ok for
> you?

yes, there is also asymettry when calling pm_runtime* in general,
I see in the decoder it is called from mtk_vcodec_dec_pm.c
but in the encoder it is called from mtk_vcodec_enc.c,

I think all calls to pm_runtime* should be out of the *_pm.c files
since for example 'mtk_vcodec_dec_pw_on' also do just one call to
pm_runtime_resume_and_get so this function can also be removed.

thanks,
Dafna

> 
>>
>> Thanks,
>> Dafna
> 
> [snip]
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 09/12] media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
  2021-09-30 10:57         ` Dafna Hirschfeld
  (?)
  (?)
@ 2021-10-07  2:57           ` Yong Wu
  -1 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-10-07  2:57 UTC (permalink / raw)
  To: Dafna Hirschfeld, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, youlin.pei, Matthias Kaehlcke, anan.sun,
	yi.kuo, acourbot, linux-media, dri-devel, Daniel Vetter,
	Chun-Kuang Hu, Philipp Zabel, Tiffany Lin, Hsin-Yi Wang,
	Eizan Miyamoto, anthony.huang, Frank Wunderlich, Irui Wang

On Thu, 2021-09-30 at 12:57 +0200, Dafna Hirschfeld wrote:
> 
> On 30.09.21 05:28, Yong Wu wrote:
> > Hi Dafna,
> > 
> > Thanks very much for the review.
> > 
> > On Wed, 2021-09-29 at 14:13 +0200, Dafna Hirschfeld wrote:
> > > 
> > > On 29.09.21 03:37, Yong Wu wrote:
> > > > MediaTek IOMMU has already added the device_link between the
> > > > consumer
> > > > and smi-larb device. If the vcodec device call the
> > > > pm_runtime_get_sync,
> > > > the smi-larb's pm_runtime_get_sync also be called
> > > > automatically.
> > > > 
> > > > CC: Tiffany Lin <tiffany.lin@mediatek.com>
> > > > CC: Irui Wang <irui.wang@mediatek.com>
> > > > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > > > Reviewed-by: Evan Green <evgreen@chromium.org>
> > > > Acked-by: Tiffany Lin <tiffany.lin@mediatek.com>
> > > > Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
> > > > ---
> > > >    .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c   | 37 +++----
> > > > -------
> > > > --
> > > >    .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  3 --
> > > >    .../platform/mtk-vcodec/mtk_vcodec_enc.c      |  1 -
> > > >    .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c   | 44 +++----
> > > > -------

[snip]

> > > >    void mtk_vcodec_release_dec_pm(struct mtk_vcodec_dev *dev)
> > > >    {
> > > >    	pm_runtime_disable(dev->pm.dev);
> > > > -	put_device(dev->pm.larbvdec);
> > > >    }
> > > 
> > > Now that functions only do  'pm_runtime_disable(dev->pm.dev);' so
> > > it
> > > will be more
> > > readable to remove the function mtk_vcodec_release_dec_pm
> > > and replace with pm_runtime_disable(dev->pm.dev);
> > > Same for the 'enc' equivalent.
> > 
> > Make sense. But It may be not proper if using pm_runtime_disable
> > as the symmetry with mtk_vcodec_init_dec_pm in the
> > mtk_vcodec_probe.
> > 
> > Maybe we should move pm_runtime_enable out from
> > mtk_vcodec_init_dec_pm
> > into mtk_vcodec_probe. I could do a new patch for this. Is this ok
> > for
> > you?
> 
> yes, there is also asymettry when calling pm_runtime* in general,
> I see in the decoder it is called from mtk_vcodec_dec_pm.c
> but in the encoder it is called from mtk_vcodec_enc.c,
> 
> I think all calls to pm_runtime* should be out of the *_pm.c files

OK. I will try this.

> since for example 'mtk_vcodec_dec_pw_on' also do just one call to
> pm_runtime_resume_and_get so this function can also be removed.

I guess this one should be reserved to vcodec guys. I see this function
is changed at [1]. Let's keep this patchset clean.

[1] 
https://patchwork.kernel.org/project/linux-mediatek/patch/20210901083215.25984-10-yunfei.dong@mediatek.com/

> 
> thanks,
> Dafna
> 
> > 
> > > 
> > > Thanks,
> > > Dafna
> > 
> > [snip]
> > _______________________________________________
> > Linux-mediatek mailing list
> > Linux-mediatek@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-mediatek
> > 

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 09/12] media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
@ 2021-10-07  2:57           ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-10-07  2:57 UTC (permalink / raw)
  To: Dafna Hirschfeld, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Chun-Kuang Hu, Will Deacon, dri-devel, anthony.huang, youlin.pei,
	Irui Wang, Evan Green, Eizan Miyamoto, Matthias Kaehlcke,
	linux-media, devicetree, Philipp Zabel, Frank Wunderlich, yi.kuo,
	linux-mediatek, Hsin-Yi Wang, Tiffany Lin, linux-arm-kernel,
	anan.sun, srv_heupstream, acourbot, linux-kernel, iommu,
	Daniel Vetter, Robin Murphy

On Thu, 2021-09-30 at 12:57 +0200, Dafna Hirschfeld wrote:
> 
> On 30.09.21 05:28, Yong Wu wrote:
> > Hi Dafna,
> > 
> > Thanks very much for the review.
> > 
> > On Wed, 2021-09-29 at 14:13 +0200, Dafna Hirschfeld wrote:
> > > 
> > > On 29.09.21 03:37, Yong Wu wrote:
> > > > MediaTek IOMMU has already added the device_link between the
> > > > consumer
> > > > and smi-larb device. If the vcodec device call the
> > > > pm_runtime_get_sync,
> > > > the smi-larb's pm_runtime_get_sync also be called
> > > > automatically.
> > > > 
> > > > CC: Tiffany Lin <tiffany.lin@mediatek.com>
> > > > CC: Irui Wang <irui.wang@mediatek.com>
> > > > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > > > Reviewed-by: Evan Green <evgreen@chromium.org>
> > > > Acked-by: Tiffany Lin <tiffany.lin@mediatek.com>
> > > > Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
> > > > ---
> > > >    .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c   | 37 +++----
> > > > -------
> > > > --
> > > >    .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  3 --
> > > >    .../platform/mtk-vcodec/mtk_vcodec_enc.c      |  1 -
> > > >    .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c   | 44 +++----
> > > > -------

[snip]

> > > >    void mtk_vcodec_release_dec_pm(struct mtk_vcodec_dev *dev)
> > > >    {
> > > >    	pm_runtime_disable(dev->pm.dev);
> > > > -	put_device(dev->pm.larbvdec);
> > > >    }
> > > 
> > > Now that functions only do  'pm_runtime_disable(dev->pm.dev);' so
> > > it
> > > will be more
> > > readable to remove the function mtk_vcodec_release_dec_pm
> > > and replace with pm_runtime_disable(dev->pm.dev);
> > > Same for the 'enc' equivalent.
> > 
> > Make sense. But It may be not proper if using pm_runtime_disable
> > as the symmetry with mtk_vcodec_init_dec_pm in the
> > mtk_vcodec_probe.
> > 
> > Maybe we should move pm_runtime_enable out from
> > mtk_vcodec_init_dec_pm
> > into mtk_vcodec_probe. I could do a new patch for this. Is this ok
> > for
> > you?
> 
> yes, there is also asymettry when calling pm_runtime* in general,
> I see in the decoder it is called from mtk_vcodec_dec_pm.c
> but in the encoder it is called from mtk_vcodec_enc.c,
> 
> I think all calls to pm_runtime* should be out of the *_pm.c files

OK. I will try this.

> since for example 'mtk_vcodec_dec_pw_on' also do just one call to
> pm_runtime_resume_and_get so this function can also be removed.

I guess this one should be reserved to vcodec guys. I see this function
is changed at [1]. Let's keep this patchset clean.

[1] 
https://patchwork.kernel.org/project/linux-mediatek/patch/20210901083215.25984-10-yunfei.dong@mediatek.com/

> 
> thanks,
> Dafna
> 
> > 
> > > 
> > > Thanks,
> > > Dafna
> > 
> > [snip]
> > _______________________________________________
> > Linux-mediatek mailing list
> > Linux-mediatek@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-mediatek
> > 
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 09/12] media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
@ 2021-10-07  2:57           ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-10-07  2:57 UTC (permalink / raw)
  To: Dafna Hirschfeld, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, youlin.pei, Matthias Kaehlcke, anan.sun,
	yi.kuo, acourbot, linux-media, dri-devel, Daniel Vetter,
	Chun-Kuang Hu, Philipp Zabel, Tiffany Lin, Hsin-Yi Wang,
	Eizan Miyamoto, anthony.huang, Frank Wunderlich, Irui Wang

On Thu, 2021-09-30 at 12:57 +0200, Dafna Hirschfeld wrote:
> 
> On 30.09.21 05:28, Yong Wu wrote:
> > Hi Dafna,
> > 
> > Thanks very much for the review.
> > 
> > On Wed, 2021-09-29 at 14:13 +0200, Dafna Hirschfeld wrote:
> > > 
> > > On 29.09.21 03:37, Yong Wu wrote:
> > > > MediaTek IOMMU has already added the device_link between the
> > > > consumer
> > > > and smi-larb device. If the vcodec device call the
> > > > pm_runtime_get_sync,
> > > > the smi-larb's pm_runtime_get_sync also be called
> > > > automatically.
> > > > 
> > > > CC: Tiffany Lin <tiffany.lin@mediatek.com>
> > > > CC: Irui Wang <irui.wang@mediatek.com>
> > > > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > > > Reviewed-by: Evan Green <evgreen@chromium.org>
> > > > Acked-by: Tiffany Lin <tiffany.lin@mediatek.com>
> > > > Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
> > > > ---
> > > >    .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c   | 37 +++----
> > > > -------
> > > > --
> > > >    .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  3 --
> > > >    .../platform/mtk-vcodec/mtk_vcodec_enc.c      |  1 -
> > > >    .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c   | 44 +++----
> > > > -------

[snip]

> > > >    void mtk_vcodec_release_dec_pm(struct mtk_vcodec_dev *dev)
> > > >    {
> > > >    	pm_runtime_disable(dev->pm.dev);
> > > > -	put_device(dev->pm.larbvdec);
> > > >    }
> > > 
> > > Now that functions only do  'pm_runtime_disable(dev->pm.dev);' so
> > > it
> > > will be more
> > > readable to remove the function mtk_vcodec_release_dec_pm
> > > and replace with pm_runtime_disable(dev->pm.dev);
> > > Same for the 'enc' equivalent.
> > 
> > Make sense. But It may be not proper if using pm_runtime_disable
> > as the symmetry with mtk_vcodec_init_dec_pm in the
> > mtk_vcodec_probe.
> > 
> > Maybe we should move pm_runtime_enable out from
> > mtk_vcodec_init_dec_pm
> > into mtk_vcodec_probe. I could do a new patch for this. Is this ok
> > for
> > you?
> 
> yes, there is also asymettry when calling pm_runtime* in general,
> I see in the decoder it is called from mtk_vcodec_dec_pm.c
> but in the encoder it is called from mtk_vcodec_enc.c,
> 
> I think all calls to pm_runtime* should be out of the *_pm.c files

OK. I will try this.

> since for example 'mtk_vcodec_dec_pw_on' also do just one call to
> pm_runtime_resume_and_get so this function can also be removed.

I guess this one should be reserved to vcodec guys. I see this function
is changed at [1]. Let's keep this patchset clean.

[1] 
https://patchwork.kernel.org/project/linux-mediatek/patch/20210901083215.25984-10-yunfei.dong@mediatek.com/

> 
> thanks,
> Dafna
> 
> > 
> > > 
> > > Thanks,
> > > Dafna
> > 
> > [snip]
> > _______________________________________________
> > Linux-mediatek mailing list
> > Linux-mediatek@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-mediatek
> > 
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 09/12] media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
@ 2021-10-07  2:57           ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-10-07  2:57 UTC (permalink / raw)
  To: Dafna Hirschfeld, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, youlin.pei, Matthias Kaehlcke, anan.sun,
	yi.kuo, acourbot, linux-media, dri-devel, Daniel Vetter,
	Chun-Kuang Hu, Philipp Zabel, Tiffany Lin, Hsin-Yi Wang,
	Eizan Miyamoto, anthony.huang, Frank Wunderlich, Irui Wang

On Thu, 2021-09-30 at 12:57 +0200, Dafna Hirschfeld wrote:
> 
> On 30.09.21 05:28, Yong Wu wrote:
> > Hi Dafna,
> > 
> > Thanks very much for the review.
> > 
> > On Wed, 2021-09-29 at 14:13 +0200, Dafna Hirschfeld wrote:
> > > 
> > > On 29.09.21 03:37, Yong Wu wrote:
> > > > MediaTek IOMMU has already added the device_link between the
> > > > consumer
> > > > and smi-larb device. If the vcodec device call the
> > > > pm_runtime_get_sync,
> > > > the smi-larb's pm_runtime_get_sync also be called
> > > > automatically.
> > > > 
> > > > CC: Tiffany Lin <tiffany.lin@mediatek.com>
> > > > CC: Irui Wang <irui.wang@mediatek.com>
> > > > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > > > Reviewed-by: Evan Green <evgreen@chromium.org>
> > > > Acked-by: Tiffany Lin <tiffany.lin@mediatek.com>
> > > > Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
> > > > ---
> > > >    .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c   | 37 +++----
> > > > -------
> > > > --
> > > >    .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  3 --
> > > >    .../platform/mtk-vcodec/mtk_vcodec_enc.c      |  1 -
> > > >    .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c   | 44 +++----
> > > > -------

[snip]

> > > >    void mtk_vcodec_release_dec_pm(struct mtk_vcodec_dev *dev)
> > > >    {
> > > >    	pm_runtime_disable(dev->pm.dev);
> > > > -	put_device(dev->pm.larbvdec);
> > > >    }
> > > 
> > > Now that functions only do  'pm_runtime_disable(dev->pm.dev);' so
> > > it
> > > will be more
> > > readable to remove the function mtk_vcodec_release_dec_pm
> > > and replace with pm_runtime_disable(dev->pm.dev);
> > > Same for the 'enc' equivalent.
> > 
> > Make sense. But It may be not proper if using pm_runtime_disable
> > as the symmetry with mtk_vcodec_init_dec_pm in the
> > mtk_vcodec_probe.
> > 
> > Maybe we should move pm_runtime_enable out from
> > mtk_vcodec_init_dec_pm
> > into mtk_vcodec_probe. I could do a new patch for this. Is this ok
> > for
> > you?
> 
> yes, there is also asymettry when calling pm_runtime* in general,
> I see in the decoder it is called from mtk_vcodec_dec_pm.c
> but in the encoder it is called from mtk_vcodec_enc.c,
> 
> I think all calls to pm_runtime* should be out of the *_pm.c files

OK. I will try this.

> since for example 'mtk_vcodec_dec_pw_on' also do just one call to
> pm_runtime_resume_and_get so this function can also be removed.

I guess this one should be reserved to vcodec guys. I see this function
is changed at [1]. Let's keep this patchset clean.

[1] 
https://patchwork.kernel.org/project/linux-mediatek/patch/20210901083215.25984-10-yunfei.dong@mediatek.com/

> 
> thanks,
> Dafna
> 
> > 
> > > 
> > > Thanks,
> > > Dafna
> > 
> > [snip]
> > _______________________________________________
> > Linux-mediatek mailing list
> > Linux-mediatek@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-mediatek
> > 
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 04/12] iommu/mediatek: Add device_link between the consumer and the larb devices
  2021-09-29  1:37   ` Yong Wu
  (?)
  (?)
@ 2021-10-11 12:36     ` Dafna Hirschfeld
  -1 siblings, 0 replies; 105+ messages in thread
From: Dafna Hirschfeld @ 2021-10-11 12:36 UTC (permalink / raw)
  To: Yong Wu, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, youlin.pei, Matthias Kaehlcke, anan.sun,
	yi.kuo, acourbot, linux-media, dri-devel, Daniel Vetter,
	Chun-Kuang Hu, Philipp Zabel, Tiffany Lin, Hsin-Yi Wang,
	Eizan Miyamoto, anthony.huang, Frank Wunderlich



On 29.09.21 03:37, Yong Wu wrote:
> MediaTek IOMMU-SMI diagram is like below. all the consumer connect with
> smi-larb, then connect with smi-common.
> 
>          M4U
>           |
>      smi-common
>           |
>    -------------
>    |         |    ...
>    |         |
> larb1     larb2
>    |         |
> vdec       venc
> 
> When the consumer works, it should enable the smi-larb's power which
> also need enable the smi-common's power firstly.
> 
> Thus, First of all, use the device link connect the consumer and the
> smi-larbs. then add device link between the smi-larb and smi-common.
> 
> This patch adds device_link between the consumer and the larbs.
> 
> When device_link_add, I add the flag DL_FLAG_STATELESS to avoid calling
> pm_runtime_xx to keep the original status of clocks. It can avoid two
> issues:
> 1) Display HW show fastlogo abnormally reported in [1]. At the beggining,
> all the clocks are enabled before entering kernel, but the clocks for
> display HW(always in larb0) will be gated after clk_enable and clk_disable
> called from device_link_add(->pm_runtime_resume) and rpm_idle. The clock
> operation happened before display driver probe. At that time, the display
> HW will be abnormal.
> 
> 2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip
> pm_runtime_xx to avoid the deadlock.
> 
> Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
> device_link_removed should be added explicitly.
> 
> [1] https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/
> [2] https://lore.kernel.org/patchwork/patch/1086569/
> 
> Suggested-by: Tomasz Figa <tfiga@chromium.org>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
> ---
>   drivers/iommu/mtk_iommu.c    | 22 ++++++++++++++++++++++
>   drivers/iommu/mtk_iommu_v1.c | 20 +++++++++++++++++++-
>   2 files changed, 41 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index d5848f78a677..a2fa55899434 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -560,22 +560,44 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
>   {
>   	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
>   	struct mtk_iommu_data *data;
> +	struct device_link *link;
> +	struct device *larbdev;
> +	unsigned int larbid;
>   
>   	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
>   		return ERR_PTR(-ENODEV); /* Not a iommu client device */
>   
>   	data = dev_iommu_priv_get(dev);
>   
> +	/*
> +	 * Link the consumer device with the smi-larb device(supplier)
> +	 * The device in each a larb is a independent HW. thus only link
> +	 * one larb here.
> +	 */
> +	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);

so larbid is always the same for all the ids of a device? If so
maybe it worth testing it and return error if this is not the case.

Thanks,
Dafna

> +	larbdev = data->larb_imu[larbid].dev;
> +	link = device_link_add(dev, larbdev,
> +			       DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
> +	if (!link)
> +		dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
>   	return &data->iommu;
>   }
>   
>   static void mtk_iommu_release_device(struct device *dev)
>   {
>   	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> +	struct mtk_iommu_data *data;
> +	struct device *larbdev;
> +	unsigned int larbid;
>   
>   	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
>   		return;
>   
> +	data = dev_iommu_priv_get(dev);
> +	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
> +	larbdev = data->larb_imu[larbid].dev;
> +	device_link_remove(dev, larbdev);
> +
>   	iommu_fwspec_free(dev);
>   }
>   
> diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
> index 4d7809432239..e6f13459470e 100644
> --- a/drivers/iommu/mtk_iommu_v1.c
> +++ b/drivers/iommu/mtk_iommu_v1.c
> @@ -423,7 +423,9 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
>   	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
>   	struct of_phandle_args iommu_spec;
>   	struct mtk_iommu_data *data;
> -	int err, idx = 0;
> +	int err, idx = 0, larbid;
> +	struct device_link *link;
> +	struct device *larbdev;
>   
>   	/*
>   	 * In the deferred case, free the existed fwspec.
> @@ -453,6 +455,14 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
>   
>   	data = dev_iommu_priv_get(dev);
>   
> +	/* Link the consumer device with the smi-larb device(supplier) */
> +	larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
> +	larbdev = data->larb_imu[larbid].dev;
> +	link = device_link_add(dev, larbdev,
> +			       DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
> +	if (!link)
> +		dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
> +
>   	return &data->iommu;
>   }
>   
> @@ -473,10 +483,18 @@ static void mtk_iommu_probe_finalize(struct device *dev)
>   static void mtk_iommu_release_device(struct device *dev)
>   {
>   	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> +	struct mtk_iommu_data *data;
> +	struct device *larbdev;
> +	unsigned int larbid;
>   
>   	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
>   		return;
>   
> +	data = dev_iommu_priv_get(dev);
> +	larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
> +	larbdev = data->larb_imu[larbid].dev;
> +	device_link_remove(dev, larbdev);
> +
>   	iommu_fwspec_free(dev);
>   }
>   
> 

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 04/12] iommu/mediatek: Add device_link between the consumer and the larb devices
@ 2021-10-11 12:36     ` Dafna Hirschfeld
  0 siblings, 0 replies; 105+ messages in thread
From: Dafna Hirschfeld @ 2021-10-11 12:36 UTC (permalink / raw)
  To: Yong Wu, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Chun-Kuang Hu, Will Deacon, dri-devel, anthony.huang, youlin.pei,
	Evan Green, Eizan Miyamoto, Matthias Kaehlcke, linux-media,
	devicetree, Philipp Zabel, Frank Wunderlich, yi.kuo,
	linux-mediatek, Hsin-Yi Wang, Tiffany Lin, linux-arm-kernel,
	anan.sun, srv_heupstream, acourbot, linux-kernel, iommu,
	Daniel Vetter, Robin Murphy



On 29.09.21 03:37, Yong Wu wrote:
> MediaTek IOMMU-SMI diagram is like below. all the consumer connect with
> smi-larb, then connect with smi-common.
> 
>          M4U
>           |
>      smi-common
>           |
>    -------------
>    |         |    ...
>    |         |
> larb1     larb2
>    |         |
> vdec       venc
> 
> When the consumer works, it should enable the smi-larb's power which
> also need enable the smi-common's power firstly.
> 
> Thus, First of all, use the device link connect the consumer and the
> smi-larbs. then add device link between the smi-larb and smi-common.
> 
> This patch adds device_link between the consumer and the larbs.
> 
> When device_link_add, I add the flag DL_FLAG_STATELESS to avoid calling
> pm_runtime_xx to keep the original status of clocks. It can avoid two
> issues:
> 1) Display HW show fastlogo abnormally reported in [1]. At the beggining,
> all the clocks are enabled before entering kernel, but the clocks for
> display HW(always in larb0) will be gated after clk_enable and clk_disable
> called from device_link_add(->pm_runtime_resume) and rpm_idle. The clock
> operation happened before display driver probe. At that time, the display
> HW will be abnormal.
> 
> 2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip
> pm_runtime_xx to avoid the deadlock.
> 
> Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
> device_link_removed should be added explicitly.
> 
> [1] https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/
> [2] https://lore.kernel.org/patchwork/patch/1086569/
> 
> Suggested-by: Tomasz Figa <tfiga@chromium.org>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
> ---
>   drivers/iommu/mtk_iommu.c    | 22 ++++++++++++++++++++++
>   drivers/iommu/mtk_iommu_v1.c | 20 +++++++++++++++++++-
>   2 files changed, 41 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index d5848f78a677..a2fa55899434 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -560,22 +560,44 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
>   {
>   	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
>   	struct mtk_iommu_data *data;
> +	struct device_link *link;
> +	struct device *larbdev;
> +	unsigned int larbid;
>   
>   	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
>   		return ERR_PTR(-ENODEV); /* Not a iommu client device */
>   
>   	data = dev_iommu_priv_get(dev);
>   
> +	/*
> +	 * Link the consumer device with the smi-larb device(supplier)
> +	 * The device in each a larb is a independent HW. thus only link
> +	 * one larb here.
> +	 */
> +	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);

so larbid is always the same for all the ids of a device? If so
maybe it worth testing it and return error if this is not the case.

Thanks,
Dafna

> +	larbdev = data->larb_imu[larbid].dev;
> +	link = device_link_add(dev, larbdev,
> +			       DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
> +	if (!link)
> +		dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
>   	return &data->iommu;
>   }
>   
>   static void mtk_iommu_release_device(struct device *dev)
>   {
>   	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> +	struct mtk_iommu_data *data;
> +	struct device *larbdev;
> +	unsigned int larbid;
>   
>   	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
>   		return;
>   
> +	data = dev_iommu_priv_get(dev);
> +	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
> +	larbdev = data->larb_imu[larbid].dev;
> +	device_link_remove(dev, larbdev);
> +
>   	iommu_fwspec_free(dev);
>   }
>   
> diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
> index 4d7809432239..e6f13459470e 100644
> --- a/drivers/iommu/mtk_iommu_v1.c
> +++ b/drivers/iommu/mtk_iommu_v1.c
> @@ -423,7 +423,9 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
>   	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
>   	struct of_phandle_args iommu_spec;
>   	struct mtk_iommu_data *data;
> -	int err, idx = 0;
> +	int err, idx = 0, larbid;
> +	struct device_link *link;
> +	struct device *larbdev;
>   
>   	/*
>   	 * In the deferred case, free the existed fwspec.
> @@ -453,6 +455,14 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
>   
>   	data = dev_iommu_priv_get(dev);
>   
> +	/* Link the consumer device with the smi-larb device(supplier) */
> +	larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
> +	larbdev = data->larb_imu[larbid].dev;
> +	link = device_link_add(dev, larbdev,
> +			       DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
> +	if (!link)
> +		dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
> +
>   	return &data->iommu;
>   }
>   
> @@ -473,10 +483,18 @@ static void mtk_iommu_probe_finalize(struct device *dev)
>   static void mtk_iommu_release_device(struct device *dev)
>   {
>   	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> +	struct mtk_iommu_data *data;
> +	struct device *larbdev;
> +	unsigned int larbid;
>   
>   	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
>   		return;
>   
> +	data = dev_iommu_priv_get(dev);
> +	larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
> +	larbdev = data->larb_imu[larbid].dev;
> +	device_link_remove(dev, larbdev);
> +
>   	iommu_fwspec_free(dev);
>   }
>   
> 
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 04/12] iommu/mediatek: Add device_link between the consumer and the larb devices
@ 2021-10-11 12:36     ` Dafna Hirschfeld
  0 siblings, 0 replies; 105+ messages in thread
From: Dafna Hirschfeld @ 2021-10-11 12:36 UTC (permalink / raw)
  To: Yong Wu, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, youlin.pei, Matthias Kaehlcke, anan.sun,
	yi.kuo, acourbot, linux-media, dri-devel, Daniel Vetter,
	Chun-Kuang Hu, Philipp Zabel, Tiffany Lin, Hsin-Yi Wang,
	Eizan Miyamoto, anthony.huang, Frank Wunderlich



On 29.09.21 03:37, Yong Wu wrote:
> MediaTek IOMMU-SMI diagram is like below. all the consumer connect with
> smi-larb, then connect with smi-common.
> 
>          M4U
>           |
>      smi-common
>           |
>    -------------
>    |         |    ...
>    |         |
> larb1     larb2
>    |         |
> vdec       venc
> 
> When the consumer works, it should enable the smi-larb's power which
> also need enable the smi-common's power firstly.
> 
> Thus, First of all, use the device link connect the consumer and the
> smi-larbs. then add device link between the smi-larb and smi-common.
> 
> This patch adds device_link between the consumer and the larbs.
> 
> When device_link_add, I add the flag DL_FLAG_STATELESS to avoid calling
> pm_runtime_xx to keep the original status of clocks. It can avoid two
> issues:
> 1) Display HW show fastlogo abnormally reported in [1]. At the beggining,
> all the clocks are enabled before entering kernel, but the clocks for
> display HW(always in larb0) will be gated after clk_enable and clk_disable
> called from device_link_add(->pm_runtime_resume) and rpm_idle. The clock
> operation happened before display driver probe. At that time, the display
> HW will be abnormal.
> 
> 2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip
> pm_runtime_xx to avoid the deadlock.
> 
> Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
> device_link_removed should be added explicitly.
> 
> [1] https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/
> [2] https://lore.kernel.org/patchwork/patch/1086569/
> 
> Suggested-by: Tomasz Figa <tfiga@chromium.org>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
> ---
>   drivers/iommu/mtk_iommu.c    | 22 ++++++++++++++++++++++
>   drivers/iommu/mtk_iommu_v1.c | 20 +++++++++++++++++++-
>   2 files changed, 41 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index d5848f78a677..a2fa55899434 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -560,22 +560,44 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
>   {
>   	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
>   	struct mtk_iommu_data *data;
> +	struct device_link *link;
> +	struct device *larbdev;
> +	unsigned int larbid;
>   
>   	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
>   		return ERR_PTR(-ENODEV); /* Not a iommu client device */
>   
>   	data = dev_iommu_priv_get(dev);
>   
> +	/*
> +	 * Link the consumer device with the smi-larb device(supplier)
> +	 * The device in each a larb is a independent HW. thus only link
> +	 * one larb here.
> +	 */
> +	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);

so larbid is always the same for all the ids of a device? If so
maybe it worth testing it and return error if this is not the case.

Thanks,
Dafna

> +	larbdev = data->larb_imu[larbid].dev;
> +	link = device_link_add(dev, larbdev,
> +			       DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
> +	if (!link)
> +		dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
>   	return &data->iommu;
>   }
>   
>   static void mtk_iommu_release_device(struct device *dev)
>   {
>   	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> +	struct mtk_iommu_data *data;
> +	struct device *larbdev;
> +	unsigned int larbid;
>   
>   	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
>   		return;
>   
> +	data = dev_iommu_priv_get(dev);
> +	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
> +	larbdev = data->larb_imu[larbid].dev;
> +	device_link_remove(dev, larbdev);
> +
>   	iommu_fwspec_free(dev);
>   }
>   
> diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
> index 4d7809432239..e6f13459470e 100644
> --- a/drivers/iommu/mtk_iommu_v1.c
> +++ b/drivers/iommu/mtk_iommu_v1.c
> @@ -423,7 +423,9 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
>   	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
>   	struct of_phandle_args iommu_spec;
>   	struct mtk_iommu_data *data;
> -	int err, idx = 0;
> +	int err, idx = 0, larbid;
> +	struct device_link *link;
> +	struct device *larbdev;
>   
>   	/*
>   	 * In the deferred case, free the existed fwspec.
> @@ -453,6 +455,14 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
>   
>   	data = dev_iommu_priv_get(dev);
>   
> +	/* Link the consumer device with the smi-larb device(supplier) */
> +	larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
> +	larbdev = data->larb_imu[larbid].dev;
> +	link = device_link_add(dev, larbdev,
> +			       DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
> +	if (!link)
> +		dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
> +
>   	return &data->iommu;
>   }
>   
> @@ -473,10 +483,18 @@ static void mtk_iommu_probe_finalize(struct device *dev)
>   static void mtk_iommu_release_device(struct device *dev)
>   {
>   	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> +	struct mtk_iommu_data *data;
> +	struct device *larbdev;
> +	unsigned int larbid;
>   
>   	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
>   		return;
>   
> +	data = dev_iommu_priv_get(dev);
> +	larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
> +	larbdev = data->larb_imu[larbid].dev;
> +	device_link_remove(dev, larbdev);
> +
>   	iommu_fwspec_free(dev);
>   }
>   
> 

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 04/12] iommu/mediatek: Add device_link between the consumer and the larb devices
@ 2021-10-11 12:36     ` Dafna Hirschfeld
  0 siblings, 0 replies; 105+ messages in thread
From: Dafna Hirschfeld @ 2021-10-11 12:36 UTC (permalink / raw)
  To: Yong Wu, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, youlin.pei, Matthias Kaehlcke, anan.sun,
	yi.kuo, acourbot, linux-media, dri-devel, Daniel Vetter,
	Chun-Kuang Hu, Philipp Zabel, Tiffany Lin, Hsin-Yi Wang,
	Eizan Miyamoto, anthony.huang, Frank Wunderlich



On 29.09.21 03:37, Yong Wu wrote:
> MediaTek IOMMU-SMI diagram is like below. all the consumer connect with
> smi-larb, then connect with smi-common.
> 
>          M4U
>           |
>      smi-common
>           |
>    -------------
>    |         |    ...
>    |         |
> larb1     larb2
>    |         |
> vdec       venc
> 
> When the consumer works, it should enable the smi-larb's power which
> also need enable the smi-common's power firstly.
> 
> Thus, First of all, use the device link connect the consumer and the
> smi-larbs. then add device link between the smi-larb and smi-common.
> 
> This patch adds device_link between the consumer and the larbs.
> 
> When device_link_add, I add the flag DL_FLAG_STATELESS to avoid calling
> pm_runtime_xx to keep the original status of clocks. It can avoid two
> issues:
> 1) Display HW show fastlogo abnormally reported in [1]. At the beggining,
> all the clocks are enabled before entering kernel, but the clocks for
> display HW(always in larb0) will be gated after clk_enable and clk_disable
> called from device_link_add(->pm_runtime_resume) and rpm_idle. The clock
> operation happened before display driver probe. At that time, the display
> HW will be abnormal.
> 
> 2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip
> pm_runtime_xx to avoid the deadlock.
> 
> Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
> device_link_removed should be added explicitly.
> 
> [1] https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/
> [2] https://lore.kernel.org/patchwork/patch/1086569/
> 
> Suggested-by: Tomasz Figa <tfiga@chromium.org>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
> ---
>   drivers/iommu/mtk_iommu.c    | 22 ++++++++++++++++++++++
>   drivers/iommu/mtk_iommu_v1.c | 20 +++++++++++++++++++-
>   2 files changed, 41 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index d5848f78a677..a2fa55899434 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -560,22 +560,44 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
>   {
>   	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
>   	struct mtk_iommu_data *data;
> +	struct device_link *link;
> +	struct device *larbdev;
> +	unsigned int larbid;
>   
>   	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
>   		return ERR_PTR(-ENODEV); /* Not a iommu client device */
>   
>   	data = dev_iommu_priv_get(dev);
>   
> +	/*
> +	 * Link the consumer device with the smi-larb device(supplier)
> +	 * The device in each a larb is a independent HW. thus only link
> +	 * one larb here.
> +	 */
> +	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);

so larbid is always the same for all the ids of a device? If so
maybe it worth testing it and return error if this is not the case.

Thanks,
Dafna

> +	larbdev = data->larb_imu[larbid].dev;
> +	link = device_link_add(dev, larbdev,
> +			       DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
> +	if (!link)
> +		dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
>   	return &data->iommu;
>   }
>   
>   static void mtk_iommu_release_device(struct device *dev)
>   {
>   	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> +	struct mtk_iommu_data *data;
> +	struct device *larbdev;
> +	unsigned int larbid;
>   
>   	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
>   		return;
>   
> +	data = dev_iommu_priv_get(dev);
> +	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
> +	larbdev = data->larb_imu[larbid].dev;
> +	device_link_remove(dev, larbdev);
> +
>   	iommu_fwspec_free(dev);
>   }
>   
> diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
> index 4d7809432239..e6f13459470e 100644
> --- a/drivers/iommu/mtk_iommu_v1.c
> +++ b/drivers/iommu/mtk_iommu_v1.c
> @@ -423,7 +423,9 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
>   	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
>   	struct of_phandle_args iommu_spec;
>   	struct mtk_iommu_data *data;
> -	int err, idx = 0;
> +	int err, idx = 0, larbid;
> +	struct device_link *link;
> +	struct device *larbdev;
>   
>   	/*
>   	 * In the deferred case, free the existed fwspec.
> @@ -453,6 +455,14 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
>   
>   	data = dev_iommu_priv_get(dev);
>   
> +	/* Link the consumer device with the smi-larb device(supplier) */
> +	larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
> +	larbdev = data->larb_imu[larbid].dev;
> +	link = device_link_add(dev, larbdev,
> +			       DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
> +	if (!link)
> +		dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
> +
>   	return &data->iommu;
>   }
>   
> @@ -473,10 +483,18 @@ static void mtk_iommu_probe_finalize(struct device *dev)
>   static void mtk_iommu_release_device(struct device *dev)
>   {
>   	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> +	struct mtk_iommu_data *data;
> +	struct device *larbdev;
> +	unsigned int larbid;
>   
>   	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
>   		return;
>   
> +	data = dev_iommu_priv_get(dev);
> +	larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
> +	larbdev = data->larb_imu[larbid].dev;
> +	device_link_remove(dev, larbdev);
> +
>   	iommu_fwspec_free(dev);
>   }
>   
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 04/12] iommu/mediatek: Add device_link between the consumer and the larb devices
  2021-10-11 12:36     ` Dafna Hirschfeld
  (?)
  (?)
@ 2021-10-16  2:23       ` Yong Wu
  -1 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-10-16  2:23 UTC (permalink / raw)
  To: Dafna Hirschfeld, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, youlin.pei, Matthias Kaehlcke, anan.sun,
	yi.kuo, acourbot, linux-media, dri-devel, Daniel Vetter,
	Chun-Kuang Hu, Philipp Zabel, Tiffany Lin, Hsin-Yi Wang,
	Eizan Miyamoto, anthony.huang, Frank Wunderlich

On Mon, 2021-10-11 at 14:36 +0200, Dafna Hirschfeld wrote:
> 
> On 29.09.21 03:37, Yong Wu wrote:
> > MediaTek IOMMU-SMI diagram is like below. all the consumer connect
> > with
> > smi-larb, then connect with smi-common.
> > 
> >          M4U
> >           |
> >      smi-common
> >           |
> >    -------------
> >    |         |    ...
> >    |         |
> > larb1     larb2
> >    |         |
> > vdec       venc
> > 
> > When the consumer works, it should enable the smi-larb's power
> > which
> > also need enable the smi-common's power firstly.
> > 
> > Thus, First of all, use the device link connect the consumer and
> > the
> > smi-larbs. then add device link between the smi-larb and smi-
> > common.
> > 
> > This patch adds device_link between the consumer and the larbs.
> > 
> > When device_link_add, I add the flag DL_FLAG_STATELESS to avoid
> > calling
> > pm_runtime_xx to keep the original status of clocks. It can avoid
> > two
> > issues:
> > 1) Display HW show fastlogo abnormally reported in [1]. At the
> > beggining,
> > all the clocks are enabled before entering kernel, but the clocks
> > for
> > display HW(always in larb0) will be gated after clk_enable and
> > clk_disable
> > called from device_link_add(->pm_runtime_resume) and rpm_idle. The
> > clock
> > operation happened before display driver probe. At that time, the
> > display
> > HW will be abnormal.
> > 
> > 2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip
> > pm_runtime_xx to avoid the deadlock.
> > 
> > Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
> > device_link_removed should be added explicitly.
> > 
> > [1] 
> > https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/
> > [2] https://lore.kernel.org/patchwork/patch/1086569/
> > 
> > Suggested-by: Tomasz Figa <tfiga@chromium.org>
> > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-
> > R2/MT7623
> > ---
> >   drivers/iommu/mtk_iommu.c    | 22 ++++++++++++++++++++++
> >   drivers/iommu/mtk_iommu_v1.c | 20 +++++++++++++++++++-
> >   2 files changed, 41 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> > index d5848f78a677..a2fa55899434 100644
> > --- a/drivers/iommu/mtk_iommu.c
> > +++ b/drivers/iommu/mtk_iommu.c
> > @@ -560,22 +560,44 @@ static struct iommu_device
> > *mtk_iommu_probe_device(struct device *dev)
> >   {
> >   	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> >   	struct mtk_iommu_data *data;
> > +	struct device_link *link;
> > +	struct device *larbdev;
> > +	unsigned int larbid;
> >   
> >   	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
> >   		return ERR_PTR(-ENODEV); /* Not a iommu client device
> > */
> >   
> >   	data = dev_iommu_priv_get(dev);
> >   
> > +	/*
> > +	 * Link the consumer device with the smi-larb device(supplier)
> > +	 * The device in each a larb is a independent HW. thus only
> > link
> > +	 * one larb here.
> > +	 */
> > +	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
> 
> so larbid is always the same for all the ids of a device? 

Yes. For me, each a dtsi node should represent a HW unit which can only
connect one larb.

> If so maybe it worth testing it and return error if this is not the
> case.

Thanks for the suggestion. This is very helpful. I did see someone put
the different larbs in one node. I will check this, and add return
EINVAL for this case.

> 
> Thanks,
> Dafna
 
> > 

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 04/12] iommu/mediatek: Add device_link between the consumer and the larb devices
@ 2021-10-16  2:23       ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-10-16  2:23 UTC (permalink / raw)
  To: Dafna Hirschfeld, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Chun-Kuang Hu, Will Deacon, dri-devel, anthony.huang, youlin.pei,
	Evan Green, Eizan Miyamoto, Matthias Kaehlcke, linux-media,
	devicetree, Philipp Zabel, Frank Wunderlich, yi.kuo,
	linux-mediatek, Hsin-Yi Wang, Tiffany Lin, linux-arm-kernel,
	anan.sun, srv_heupstream, acourbot, linux-kernel, iommu,
	Daniel Vetter, Robin Murphy

On Mon, 2021-10-11 at 14:36 +0200, Dafna Hirschfeld wrote:
> 
> On 29.09.21 03:37, Yong Wu wrote:
> > MediaTek IOMMU-SMI diagram is like below. all the consumer connect
> > with
> > smi-larb, then connect with smi-common.
> > 
> >          M4U
> >           |
> >      smi-common
> >           |
> >    -------------
> >    |         |    ...
> >    |         |
> > larb1     larb2
> >    |         |
> > vdec       venc
> > 
> > When the consumer works, it should enable the smi-larb's power
> > which
> > also need enable the smi-common's power firstly.
> > 
> > Thus, First of all, use the device link connect the consumer and
> > the
> > smi-larbs. then add device link between the smi-larb and smi-
> > common.
> > 
> > This patch adds device_link between the consumer and the larbs.
> > 
> > When device_link_add, I add the flag DL_FLAG_STATELESS to avoid
> > calling
> > pm_runtime_xx to keep the original status of clocks. It can avoid
> > two
> > issues:
> > 1) Display HW show fastlogo abnormally reported in [1]. At the
> > beggining,
> > all the clocks are enabled before entering kernel, but the clocks
> > for
> > display HW(always in larb0) will be gated after clk_enable and
> > clk_disable
> > called from device_link_add(->pm_runtime_resume) and rpm_idle. The
> > clock
> > operation happened before display driver probe. At that time, the
> > display
> > HW will be abnormal.
> > 
> > 2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip
> > pm_runtime_xx to avoid the deadlock.
> > 
> > Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
> > device_link_removed should be added explicitly.
> > 
> > [1] 
> > https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/
> > [2] https://lore.kernel.org/patchwork/patch/1086569/
> > 
> > Suggested-by: Tomasz Figa <tfiga@chromium.org>
> > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-
> > R2/MT7623
> > ---
> >   drivers/iommu/mtk_iommu.c    | 22 ++++++++++++++++++++++
> >   drivers/iommu/mtk_iommu_v1.c | 20 +++++++++++++++++++-
> >   2 files changed, 41 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> > index d5848f78a677..a2fa55899434 100644
> > --- a/drivers/iommu/mtk_iommu.c
> > +++ b/drivers/iommu/mtk_iommu.c
> > @@ -560,22 +560,44 @@ static struct iommu_device
> > *mtk_iommu_probe_device(struct device *dev)
> >   {
> >   	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> >   	struct mtk_iommu_data *data;
> > +	struct device_link *link;
> > +	struct device *larbdev;
> > +	unsigned int larbid;
> >   
> >   	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
> >   		return ERR_PTR(-ENODEV); /* Not a iommu client device
> > */
> >   
> >   	data = dev_iommu_priv_get(dev);
> >   
> > +	/*
> > +	 * Link the consumer device with the smi-larb device(supplier)
> > +	 * The device in each a larb is a independent HW. thus only
> > link
> > +	 * one larb here.
> > +	 */
> > +	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
> 
> so larbid is always the same for all the ids of a device? 

Yes. For me, each a dtsi node should represent a HW unit which can only
connect one larb.

> If so maybe it worth testing it and return error if this is not the
> case.

Thanks for the suggestion. This is very helpful. I did see someone put
the different larbs in one node. I will check this, and add return
EINVAL for this case.

> 
> Thanks,
> Dafna
 
> > 
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 04/12] iommu/mediatek: Add device_link between the consumer and the larb devices
@ 2021-10-16  2:23       ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-10-16  2:23 UTC (permalink / raw)
  To: Dafna Hirschfeld, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, youlin.pei, Matthias Kaehlcke, anan.sun,
	yi.kuo, acourbot, linux-media, dri-devel, Daniel Vetter,
	Chun-Kuang Hu, Philipp Zabel, Tiffany Lin, Hsin-Yi Wang,
	Eizan Miyamoto, anthony.huang, Frank Wunderlich

On Mon, 2021-10-11 at 14:36 +0200, Dafna Hirschfeld wrote:
> 
> On 29.09.21 03:37, Yong Wu wrote:
> > MediaTek IOMMU-SMI diagram is like below. all the consumer connect
> > with
> > smi-larb, then connect with smi-common.
> > 
> >          M4U
> >           |
> >      smi-common
> >           |
> >    -------------
> >    |         |    ...
> >    |         |
> > larb1     larb2
> >    |         |
> > vdec       venc
> > 
> > When the consumer works, it should enable the smi-larb's power
> > which
> > also need enable the smi-common's power firstly.
> > 
> > Thus, First of all, use the device link connect the consumer and
> > the
> > smi-larbs. then add device link between the smi-larb and smi-
> > common.
> > 
> > This patch adds device_link between the consumer and the larbs.
> > 
> > When device_link_add, I add the flag DL_FLAG_STATELESS to avoid
> > calling
> > pm_runtime_xx to keep the original status of clocks. It can avoid
> > two
> > issues:
> > 1) Display HW show fastlogo abnormally reported in [1]. At the
> > beggining,
> > all the clocks are enabled before entering kernel, but the clocks
> > for
> > display HW(always in larb0) will be gated after clk_enable and
> > clk_disable
> > called from device_link_add(->pm_runtime_resume) and rpm_idle. The
> > clock
> > operation happened before display driver probe. At that time, the
> > display
> > HW will be abnormal.
> > 
> > 2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip
> > pm_runtime_xx to avoid the deadlock.
> > 
> > Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
> > device_link_removed should be added explicitly.
> > 
> > [1] 
> > https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/
> > [2] https://lore.kernel.org/patchwork/patch/1086569/
> > 
> > Suggested-by: Tomasz Figa <tfiga@chromium.org>
> > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-
> > R2/MT7623
> > ---
> >   drivers/iommu/mtk_iommu.c    | 22 ++++++++++++++++++++++
> >   drivers/iommu/mtk_iommu_v1.c | 20 +++++++++++++++++++-
> >   2 files changed, 41 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> > index d5848f78a677..a2fa55899434 100644
> > --- a/drivers/iommu/mtk_iommu.c
> > +++ b/drivers/iommu/mtk_iommu.c
> > @@ -560,22 +560,44 @@ static struct iommu_device
> > *mtk_iommu_probe_device(struct device *dev)
> >   {
> >   	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> >   	struct mtk_iommu_data *data;
> > +	struct device_link *link;
> > +	struct device *larbdev;
> > +	unsigned int larbid;
> >   
> >   	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
> >   		return ERR_PTR(-ENODEV); /* Not a iommu client device
> > */
> >   
> >   	data = dev_iommu_priv_get(dev);
> >   
> > +	/*
> > +	 * Link the consumer device with the smi-larb device(supplier)
> > +	 * The device in each a larb is a independent HW. thus only
> > link
> > +	 * one larb here.
> > +	 */
> > +	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
> 
> so larbid is always the same for all the ids of a device? 

Yes. For me, each a dtsi node should represent a HW unit which can only
connect one larb.

> If so maybe it worth testing it and return error if this is not the
> case.

Thanks for the suggestion. This is very helpful. I did see someone put
the different larbs in one node. I will check this, and add return
EINVAL for this case.

> 
> Thanks,
> Dafna
 
> > 
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 04/12] iommu/mediatek: Add device_link between the consumer and the larb devices
@ 2021-10-16  2:23       ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-10-16  2:23 UTC (permalink / raw)
  To: Dafna Hirschfeld, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, youlin.pei, Matthias Kaehlcke, anan.sun,
	yi.kuo, acourbot, linux-media, dri-devel, Daniel Vetter,
	Chun-Kuang Hu, Philipp Zabel, Tiffany Lin, Hsin-Yi Wang,
	Eizan Miyamoto, anthony.huang, Frank Wunderlich

On Mon, 2021-10-11 at 14:36 +0200, Dafna Hirschfeld wrote:
> 
> On 29.09.21 03:37, Yong Wu wrote:
> > MediaTek IOMMU-SMI diagram is like below. all the consumer connect
> > with
> > smi-larb, then connect with smi-common.
> > 
> >          M4U
> >           |
> >      smi-common
> >           |
> >    -------------
> >    |         |    ...
> >    |         |
> > larb1     larb2
> >    |         |
> > vdec       venc
> > 
> > When the consumer works, it should enable the smi-larb's power
> > which
> > also need enable the smi-common's power firstly.
> > 
> > Thus, First of all, use the device link connect the consumer and
> > the
> > smi-larbs. then add device link between the smi-larb and smi-
> > common.
> > 
> > This patch adds device_link between the consumer and the larbs.
> > 
> > When device_link_add, I add the flag DL_FLAG_STATELESS to avoid
> > calling
> > pm_runtime_xx to keep the original status of clocks. It can avoid
> > two
> > issues:
> > 1) Display HW show fastlogo abnormally reported in [1]. At the
> > beggining,
> > all the clocks are enabled before entering kernel, but the clocks
> > for
> > display HW(always in larb0) will be gated after clk_enable and
> > clk_disable
> > called from device_link_add(->pm_runtime_resume) and rpm_idle. The
> > clock
> > operation happened before display driver probe. At that time, the
> > display
> > HW will be abnormal.
> > 
> > 2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip
> > pm_runtime_xx to avoid the deadlock.
> > 
> > Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
> > device_link_removed should be added explicitly.
> > 
> > [1] 
> > https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/
> > [2] https://lore.kernel.org/patchwork/patch/1086569/
> > 
> > Suggested-by: Tomasz Figa <tfiga@chromium.org>
> > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-
> > R2/MT7623
> > ---
> >   drivers/iommu/mtk_iommu.c    | 22 ++++++++++++++++++++++
> >   drivers/iommu/mtk_iommu_v1.c | 20 +++++++++++++++++++-
> >   2 files changed, 41 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> > index d5848f78a677..a2fa55899434 100644
> > --- a/drivers/iommu/mtk_iommu.c
> > +++ b/drivers/iommu/mtk_iommu.c
> > @@ -560,22 +560,44 @@ static struct iommu_device
> > *mtk_iommu_probe_device(struct device *dev)
> >   {
> >   	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> >   	struct mtk_iommu_data *data;
> > +	struct device_link *link;
> > +	struct device *larbdev;
> > +	unsigned int larbid;
> >   
> >   	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
> >   		return ERR_PTR(-ENODEV); /* Not a iommu client device
> > */
> >   
> >   	data = dev_iommu_priv_get(dev);
> >   
> > +	/*
> > +	 * Link the consumer device with the smi-larb device(supplier)
> > +	 * The device in each a larb is a independent HW. thus only
> > link
> > +	 * one larb here.
> > +	 */
> > +	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
> 
> so larbid is always the same for all the ids of a device? 

Yes. For me, each a dtsi node should represent a HW unit which can only
connect one larb.

> If so maybe it worth testing it and return error if this is not the
> case.

Thanks for the suggestion. This is very helpful. I did see someone put
the different larbs in one node. I will check this, and add return
EINVAL for this case.

> 
> Thanks,
> Dafna
 
> > 
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 04/12] iommu/mediatek: Add device_link between the consumer and the larb devices
  2021-10-16  2:23       ` Yong Wu
  (?)
  (?)
@ 2021-10-18  7:13         ` Dafna Hirschfeld
  -1 siblings, 0 replies; 105+ messages in thread
From: Dafna Hirschfeld @ 2021-10-18  7:13 UTC (permalink / raw)
  To: Yong Wu, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, youlin.pei, Matthias Kaehlcke, anan.sun,
	yi.kuo, acourbot, linux-media, dri-devel, Daniel Vetter,
	Chun-Kuang Hu, Philipp Zabel, Tiffany Lin, Hsin-Yi Wang,
	Eizan Miyamoto, anthony.huang, Frank Wunderlich



On 16.10.21 04:23, Yong Wu wrote:
> On Mon, 2021-10-11 at 14:36 +0200, Dafna Hirschfeld wrote:
>>
>> On 29.09.21 03:37, Yong Wu wrote:
>>> MediaTek IOMMU-SMI diagram is like below. all the consumer connect
>>> with
>>> smi-larb, then connect with smi-common.
>>>
>>>           M4U
>>>            |
>>>       smi-common
>>>            |
>>>     -------------
>>>     |         |    ...
>>>     |         |
>>> larb1     larb2
>>>     |         |
>>> vdec       venc
>>>
>>> When the consumer works, it should enable the smi-larb's power
>>> which
>>> also need enable the smi-common's power firstly.
>>>
>>> Thus, First of all, use the device link connect the consumer and
>>> the
>>> smi-larbs. then add device link between the smi-larb and smi-
>>> common.
>>>
>>> This patch adds device_link between the consumer and the larbs.
>>>
>>> When device_link_add, I add the flag DL_FLAG_STATELESS to avoid
>>> calling
>>> pm_runtime_xx to keep the original status of clocks. It can avoid
>>> two
>>> issues:
>>> 1) Display HW show fastlogo abnormally reported in [1]. At the
>>> beggining,
>>> all the clocks are enabled before entering kernel, but the clocks
>>> for
>>> display HW(always in larb0) will be gated after clk_enable and
>>> clk_disable
>>> called from device_link_add(->pm_runtime_resume) and rpm_idle. The
>>> clock
>>> operation happened before display driver probe. At that time, the
>>> display
>>> HW will be abnormal.
>>>
>>> 2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip
>>> pm_runtime_xx to avoid the deadlock.
>>>
>>> Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
>>> device_link_removed should be added explicitly.
>>>
>>> [1]
>>> https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/
>>> [2] https://lore.kernel.org/patchwork/patch/1086569/
>>>
>>> Suggested-by: Tomasz Figa <tfiga@chromium.org>
>>> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
>>> Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-
>>> R2/MT7623
>>> ---
>>>    drivers/iommu/mtk_iommu.c    | 22 ++++++++++++++++++++++
>>>    drivers/iommu/mtk_iommu_v1.c | 20 +++++++++++++++++++-
>>>    2 files changed, 41 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
>>> index d5848f78a677..a2fa55899434 100644
>>> --- a/drivers/iommu/mtk_iommu.c
>>> +++ b/drivers/iommu/mtk_iommu.c
>>> @@ -560,22 +560,44 @@ static struct iommu_device
>>> *mtk_iommu_probe_device(struct device *dev)
>>>    {
>>>    	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
>>>    	struct mtk_iommu_data *data;
>>> +	struct device_link *link;
>>> +	struct device *larbdev;
>>> +	unsigned int larbid;
>>>    
>>>    	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
>>>    		return ERR_PTR(-ENODEV); /* Not a iommu client device
>>> */
>>>    
>>>    	data = dev_iommu_priv_get(dev);
>>>    
>>> +	/*
>>> +	 * Link the consumer device with the smi-larb device(supplier)
>>> +	 * The device in each a larb is a independent HW. thus only
>>> link
>>> +	 * one larb here.
>>> +	 */
>>> +	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
>>
>> so larbid is always the same for all the ids of a device?
> 
> Yes. For me, each a dtsi node should represent a HW unit which can only
> connect one larb.
> 
>> If so maybe it worth testing it and return error if this is not the
>> case.
> 
> Thanks for the suggestion. This is very helpful. I did see someone put
> the different larbs in one node. I will check this, and add return

I am working on bugs found on media drivers, could you please point me to
that wrong node?
Will you send a fix to that node in the dtsi?


Thanks,
Dafna

> EINVAL for this case.



> 
>>
>> Thanks,
>> Dafna
>   
>>>

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 04/12] iommu/mediatek: Add device_link between the consumer and the larb devices
@ 2021-10-18  7:13         ` Dafna Hirschfeld
  0 siblings, 0 replies; 105+ messages in thread
From: Dafna Hirschfeld @ 2021-10-18  7:13 UTC (permalink / raw)
  To: Yong Wu, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Chun-Kuang Hu, Will Deacon, dri-devel, anthony.huang, youlin.pei,
	Evan Green, Eizan Miyamoto, Matthias Kaehlcke, linux-media,
	devicetree, Philipp Zabel, Frank Wunderlich, yi.kuo,
	linux-mediatek, Hsin-Yi Wang, Tiffany Lin, linux-arm-kernel,
	anan.sun, srv_heupstream, acourbot, linux-kernel, iommu,
	Daniel Vetter, Robin Murphy



On 16.10.21 04:23, Yong Wu wrote:
> On Mon, 2021-10-11 at 14:36 +0200, Dafna Hirschfeld wrote:
>>
>> On 29.09.21 03:37, Yong Wu wrote:
>>> MediaTek IOMMU-SMI diagram is like below. all the consumer connect
>>> with
>>> smi-larb, then connect with smi-common.
>>>
>>>           M4U
>>>            |
>>>       smi-common
>>>            |
>>>     -------------
>>>     |         |    ...
>>>     |         |
>>> larb1     larb2
>>>     |         |
>>> vdec       venc
>>>
>>> When the consumer works, it should enable the smi-larb's power
>>> which
>>> also need enable the smi-common's power firstly.
>>>
>>> Thus, First of all, use the device link connect the consumer and
>>> the
>>> smi-larbs. then add device link between the smi-larb and smi-
>>> common.
>>>
>>> This patch adds device_link between the consumer and the larbs.
>>>
>>> When device_link_add, I add the flag DL_FLAG_STATELESS to avoid
>>> calling
>>> pm_runtime_xx to keep the original status of clocks. It can avoid
>>> two
>>> issues:
>>> 1) Display HW show fastlogo abnormally reported in [1]. At the
>>> beggining,
>>> all the clocks are enabled before entering kernel, but the clocks
>>> for
>>> display HW(always in larb0) will be gated after clk_enable and
>>> clk_disable
>>> called from device_link_add(->pm_runtime_resume) and rpm_idle. The
>>> clock
>>> operation happened before display driver probe. At that time, the
>>> display
>>> HW will be abnormal.
>>>
>>> 2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip
>>> pm_runtime_xx to avoid the deadlock.
>>>
>>> Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
>>> device_link_removed should be added explicitly.
>>>
>>> [1]
>>> https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/
>>> [2] https://lore.kernel.org/patchwork/patch/1086569/
>>>
>>> Suggested-by: Tomasz Figa <tfiga@chromium.org>
>>> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
>>> Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-
>>> R2/MT7623
>>> ---
>>>    drivers/iommu/mtk_iommu.c    | 22 ++++++++++++++++++++++
>>>    drivers/iommu/mtk_iommu_v1.c | 20 +++++++++++++++++++-
>>>    2 files changed, 41 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
>>> index d5848f78a677..a2fa55899434 100644
>>> --- a/drivers/iommu/mtk_iommu.c
>>> +++ b/drivers/iommu/mtk_iommu.c
>>> @@ -560,22 +560,44 @@ static struct iommu_device
>>> *mtk_iommu_probe_device(struct device *dev)
>>>    {
>>>    	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
>>>    	struct mtk_iommu_data *data;
>>> +	struct device_link *link;
>>> +	struct device *larbdev;
>>> +	unsigned int larbid;
>>>    
>>>    	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
>>>    		return ERR_PTR(-ENODEV); /* Not a iommu client device
>>> */
>>>    
>>>    	data = dev_iommu_priv_get(dev);
>>>    
>>> +	/*
>>> +	 * Link the consumer device with the smi-larb device(supplier)
>>> +	 * The device in each a larb is a independent HW. thus only
>>> link
>>> +	 * one larb here.
>>> +	 */
>>> +	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
>>
>> so larbid is always the same for all the ids of a device?
> 
> Yes. For me, each a dtsi node should represent a HW unit which can only
> connect one larb.
> 
>> If so maybe it worth testing it and return error if this is not the
>> case.
> 
> Thanks for the suggestion. This is very helpful. I did see someone put
> the different larbs in one node. I will check this, and add return

I am working on bugs found on media drivers, could you please point me to
that wrong node?
Will you send a fix to that node in the dtsi?


Thanks,
Dafna

> EINVAL for this case.



> 
>>
>> Thanks,
>> Dafna
>   
>>>
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 04/12] iommu/mediatek: Add device_link between the consumer and the larb devices
@ 2021-10-18  7:13         ` Dafna Hirschfeld
  0 siblings, 0 replies; 105+ messages in thread
From: Dafna Hirschfeld @ 2021-10-18  7:13 UTC (permalink / raw)
  To: Yong Wu, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, youlin.pei, Matthias Kaehlcke, anan.sun,
	yi.kuo, acourbot, linux-media, dri-devel, Daniel Vetter,
	Chun-Kuang Hu, Philipp Zabel, Tiffany Lin, Hsin-Yi Wang,
	Eizan Miyamoto, anthony.huang, Frank Wunderlich



On 16.10.21 04:23, Yong Wu wrote:
> On Mon, 2021-10-11 at 14:36 +0200, Dafna Hirschfeld wrote:
>>
>> On 29.09.21 03:37, Yong Wu wrote:
>>> MediaTek IOMMU-SMI diagram is like below. all the consumer connect
>>> with
>>> smi-larb, then connect with smi-common.
>>>
>>>           M4U
>>>            |
>>>       smi-common
>>>            |
>>>     -------------
>>>     |         |    ...
>>>     |         |
>>> larb1     larb2
>>>     |         |
>>> vdec       venc
>>>
>>> When the consumer works, it should enable the smi-larb's power
>>> which
>>> also need enable the smi-common's power firstly.
>>>
>>> Thus, First of all, use the device link connect the consumer and
>>> the
>>> smi-larbs. then add device link between the smi-larb and smi-
>>> common.
>>>
>>> This patch adds device_link between the consumer and the larbs.
>>>
>>> When device_link_add, I add the flag DL_FLAG_STATELESS to avoid
>>> calling
>>> pm_runtime_xx to keep the original status of clocks. It can avoid
>>> two
>>> issues:
>>> 1) Display HW show fastlogo abnormally reported in [1]. At the
>>> beggining,
>>> all the clocks are enabled before entering kernel, but the clocks
>>> for
>>> display HW(always in larb0) will be gated after clk_enable and
>>> clk_disable
>>> called from device_link_add(->pm_runtime_resume) and rpm_idle. The
>>> clock
>>> operation happened before display driver probe. At that time, the
>>> display
>>> HW will be abnormal.
>>>
>>> 2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip
>>> pm_runtime_xx to avoid the deadlock.
>>>
>>> Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
>>> device_link_removed should be added explicitly.
>>>
>>> [1]
>>> https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/
>>> [2] https://lore.kernel.org/patchwork/patch/1086569/
>>>
>>> Suggested-by: Tomasz Figa <tfiga@chromium.org>
>>> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
>>> Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-
>>> R2/MT7623
>>> ---
>>>    drivers/iommu/mtk_iommu.c    | 22 ++++++++++++++++++++++
>>>    drivers/iommu/mtk_iommu_v1.c | 20 +++++++++++++++++++-
>>>    2 files changed, 41 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
>>> index d5848f78a677..a2fa55899434 100644
>>> --- a/drivers/iommu/mtk_iommu.c
>>> +++ b/drivers/iommu/mtk_iommu.c
>>> @@ -560,22 +560,44 @@ static struct iommu_device
>>> *mtk_iommu_probe_device(struct device *dev)
>>>    {
>>>    	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
>>>    	struct mtk_iommu_data *data;
>>> +	struct device_link *link;
>>> +	struct device *larbdev;
>>> +	unsigned int larbid;
>>>    
>>>    	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
>>>    		return ERR_PTR(-ENODEV); /* Not a iommu client device
>>> */
>>>    
>>>    	data = dev_iommu_priv_get(dev);
>>>    
>>> +	/*
>>> +	 * Link the consumer device with the smi-larb device(supplier)
>>> +	 * The device in each a larb is a independent HW. thus only
>>> link
>>> +	 * one larb here.
>>> +	 */
>>> +	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
>>
>> so larbid is always the same for all the ids of a device?
> 
> Yes. For me, each a dtsi node should represent a HW unit which can only
> connect one larb.
> 
>> If so maybe it worth testing it and return error if this is not the
>> case.
> 
> Thanks for the suggestion. This is very helpful. I did see someone put
> the different larbs in one node. I will check this, and add return

I am working on bugs found on media drivers, could you please point me to
that wrong node?
Will you send a fix to that node in the dtsi?


Thanks,
Dafna

> EINVAL for this case.



> 
>>
>> Thanks,
>> Dafna
>   
>>>

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 04/12] iommu/mediatek: Add device_link between the consumer and the larb devices
@ 2021-10-18  7:13         ` Dafna Hirschfeld
  0 siblings, 0 replies; 105+ messages in thread
From: Dafna Hirschfeld @ 2021-10-18  7:13 UTC (permalink / raw)
  To: Yong Wu, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, youlin.pei, Matthias Kaehlcke, anan.sun,
	yi.kuo, acourbot, linux-media, dri-devel, Daniel Vetter,
	Chun-Kuang Hu, Philipp Zabel, Tiffany Lin, Hsin-Yi Wang,
	Eizan Miyamoto, anthony.huang, Frank Wunderlich



On 16.10.21 04:23, Yong Wu wrote:
> On Mon, 2021-10-11 at 14:36 +0200, Dafna Hirschfeld wrote:
>>
>> On 29.09.21 03:37, Yong Wu wrote:
>>> MediaTek IOMMU-SMI diagram is like below. all the consumer connect
>>> with
>>> smi-larb, then connect with smi-common.
>>>
>>>           M4U
>>>            |
>>>       smi-common
>>>            |
>>>     -------------
>>>     |         |    ...
>>>     |         |
>>> larb1     larb2
>>>     |         |
>>> vdec       venc
>>>
>>> When the consumer works, it should enable the smi-larb's power
>>> which
>>> also need enable the smi-common's power firstly.
>>>
>>> Thus, First of all, use the device link connect the consumer and
>>> the
>>> smi-larbs. then add device link between the smi-larb and smi-
>>> common.
>>>
>>> This patch adds device_link between the consumer and the larbs.
>>>
>>> When device_link_add, I add the flag DL_FLAG_STATELESS to avoid
>>> calling
>>> pm_runtime_xx to keep the original status of clocks. It can avoid
>>> two
>>> issues:
>>> 1) Display HW show fastlogo abnormally reported in [1]. At the
>>> beggining,
>>> all the clocks are enabled before entering kernel, but the clocks
>>> for
>>> display HW(always in larb0) will be gated after clk_enable and
>>> clk_disable
>>> called from device_link_add(->pm_runtime_resume) and rpm_idle. The
>>> clock
>>> operation happened before display driver probe. At that time, the
>>> display
>>> HW will be abnormal.
>>>
>>> 2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip
>>> pm_runtime_xx to avoid the deadlock.
>>>
>>> Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
>>> device_link_removed should be added explicitly.
>>>
>>> [1]
>>> https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/
>>> [2] https://lore.kernel.org/patchwork/patch/1086569/
>>>
>>> Suggested-by: Tomasz Figa <tfiga@chromium.org>
>>> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
>>> Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-
>>> R2/MT7623
>>> ---
>>>    drivers/iommu/mtk_iommu.c    | 22 ++++++++++++++++++++++
>>>    drivers/iommu/mtk_iommu_v1.c | 20 +++++++++++++++++++-
>>>    2 files changed, 41 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
>>> index d5848f78a677..a2fa55899434 100644
>>> --- a/drivers/iommu/mtk_iommu.c
>>> +++ b/drivers/iommu/mtk_iommu.c
>>> @@ -560,22 +560,44 @@ static struct iommu_device
>>> *mtk_iommu_probe_device(struct device *dev)
>>>    {
>>>    	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
>>>    	struct mtk_iommu_data *data;
>>> +	struct device_link *link;
>>> +	struct device *larbdev;
>>> +	unsigned int larbid;
>>>    
>>>    	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
>>>    		return ERR_PTR(-ENODEV); /* Not a iommu client device
>>> */
>>>    
>>>    	data = dev_iommu_priv_get(dev);
>>>    
>>> +	/*
>>> +	 * Link the consumer device with the smi-larb device(supplier)
>>> +	 * The device in each a larb is a independent HW. thus only
>>> link
>>> +	 * one larb here.
>>> +	 */
>>> +	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
>>
>> so larbid is always the same for all the ids of a device?
> 
> Yes. For me, each a dtsi node should represent a HW unit which can only
> connect one larb.
> 
>> If so maybe it worth testing it and return error if this is not the
>> case.
> 
> Thanks for the suggestion. This is very helpful. I did see someone put
> the different larbs in one node. I will check this, and add return

I am working on bugs found on media drivers, could you please point me to
that wrong node?
Will you send a fix to that node in the dtsi?


Thanks,
Dafna

> EINVAL for this case.



> 
>>
>> Thanks,
>> Dafna
>   
>>>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 04/12] iommu/mediatek: Add device_link between the consumer and the larb devices
  2021-10-18  7:13         ` Dafna Hirschfeld
  (?)
  (?)
@ 2021-10-25  3:57           ` Yong Wu
  -1 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-10-25  3:57 UTC (permalink / raw)
  To: Dafna Hirschfeld, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, youlin.pei, Matthias Kaehlcke, anan.sun,
	yi.kuo, acourbot, linux-media, dri-devel, Daniel Vetter,
	Chun-Kuang Hu, Philipp Zabel, Tiffany Lin, Hsin-Yi Wang,
	Eizan Miyamoto, anthony.huang, Frank Wunderlich

On Mon, 2021-10-18 at 09:13 +0200, Dafna Hirschfeld wrote:
> 
> On 16.10.21 04:23, Yong Wu wrote:
> > On Mon, 2021-10-11 at 14:36 +0200, Dafna Hirschfeld wrote:
> > > 
> > > On 29.09.21 03:37, Yong Wu wrote:
> > > > MediaTek IOMMU-SMI diagram is like below. all the consumer
> > > > connect
> > > > with
> > > > smi-larb, then connect with smi-common.
> > > > 
> > > >           M4U
> > > >            |
> > > >       smi-common
> > > >            |
> > > >     -------------
> > > >     |         |    ...
> > > >     |         |
> > > > larb1     larb2
> > > >     |         |
> > > > vdec       venc
> > > > 
> > > > When the consumer works, it should enable the smi-larb's power
> > > > which
> > > > also need enable the smi-common's power firstly.
> > > > 
> > > > Thus, First of all, use the device link connect the consumer
> > > > and
> > > > the
> > > > smi-larbs. then add device link between the smi-larb and smi-
> > > > common.
> > > > 
> > > > This patch adds device_link between the consumer and the larbs.
> > > > 
> > > > When device_link_add, I add the flag DL_FLAG_STATELESS to avoid
> > > > calling
> > > > pm_runtime_xx to keep the original status of clocks. It can
> > > > avoid
> > > > two
> > > > issues:
> > > > 1) Display HW show fastlogo abnormally reported in [1]. At the
> > > > beggining,
> > > > all the clocks are enabled before entering kernel, but the
> > > > clocks
> > > > for
> > > > display HW(always in larb0) will be gated after clk_enable and
> > > > clk_disable
> > > > called from device_link_add(->pm_runtime_resume) and rpm_idle.
> > > > The
> > > > clock
> > > > operation happened before display driver probe. At that time,
> > > > the
> > > > display
> > > > HW will be abnormal.
> > > > 
> > > > 2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to
> > > > skip
> > > > pm_runtime_xx to avoid the deadlock.
> > > > 
> > > > Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
> > > > device_link_removed should be added explicitly.
> > > > 
> > > > [1]
> > > > 
https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/
> > > > [2] https://lore.kernel.org/patchwork/patch/1086569/
> > > > 
> > > > Suggested-by: Tomasz Figa <tfiga@chromium.org>
> > > > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > > > Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-
> > > > R2/MT7623
> > > > ---
> > > >    drivers/iommu/mtk_iommu.c    | 22 ++++++++++++++++++++++
> > > >    drivers/iommu/mtk_iommu_v1.c | 20 +++++++++++++++++++-
> > > >    2 files changed, 41 insertions(+), 1 deletion(-)
> > > > 
> > > > diff --git a/drivers/iommu/mtk_iommu.c
> > > > b/drivers/iommu/mtk_iommu.c
> > > > index d5848f78a677..a2fa55899434 100644
> > > > --- a/drivers/iommu/mtk_iommu.c
> > > > +++ b/drivers/iommu/mtk_iommu.c
> > > > @@ -560,22 +560,44 @@ static struct iommu_device
> > > > *mtk_iommu_probe_device(struct device *dev)
> > > >    {
> > > >    	struct iommu_fwspec *fwspec =
> > > > dev_iommu_fwspec_get(dev);
> > > >    	struct mtk_iommu_data *data;
> > > > +	struct device_link *link;
> > > > +	struct device *larbdev;
> > > > +	unsigned int larbid;
> > > >    
> > > >    	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
> > > >    		return ERR_PTR(-ENODEV); /* Not a iommu client
> > > > device
> > > > */
> > > >    
> > > >    	data = dev_iommu_priv_get(dev);
> > > >    
> > > > +	/*
> > > > +	 * Link the consumer device with the smi-larb
> > > > device(supplier)
> > > > +	 * The device in each a larb is a independent HW. thus
> > > > only
> > > > link
> > > > +	 * one larb here.
> > > > +	 */
> > > > +	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
> > > 
> > > so larbid is always the same for all the ids of a device?
> > 
> > Yes. For me, each a dtsi node should represent a HW unit which can
> > only
> > connect one larb.
> > 
> > > If so maybe it worth testing it and return error if this is not
> > > the
> > > case.
> > 
> > Thanks for the suggestion. This is very helpful. I did see someone
> > put
> > the different larbs in one node. I will check this, and add return
> 
> I am working on bugs found on media drivers, could you please point
> me to
> that wrong node?
> Will you send a fix to that node in the dtsi?

sorry. I mean it happened in the internal branch and it has already
been fixed internally,  all the upstream nodes are ok for this.

Thanks
> 
> 
> Thanks,
> Dafna
> 
> > EINVAL for this case.
> 
> 
> 
> > 
> > > 
> > > Thanks,
> > > Dafna
> > 
> >   
> > > > 

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 04/12] iommu/mediatek: Add device_link between the consumer and the larb devices
@ 2021-10-25  3:57           ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-10-25  3:57 UTC (permalink / raw)
  To: Dafna Hirschfeld, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Chun-Kuang Hu, Will Deacon, dri-devel, anthony.huang, youlin.pei,
	Evan Green, Eizan Miyamoto, Matthias Kaehlcke, linux-media,
	devicetree, Philipp Zabel, Frank Wunderlich, yi.kuo,
	linux-mediatek, Hsin-Yi Wang, Tiffany Lin, linux-arm-kernel,
	anan.sun, srv_heupstream, acourbot, linux-kernel, iommu,
	Daniel Vetter, Robin Murphy

On Mon, 2021-10-18 at 09:13 +0200, Dafna Hirschfeld wrote:
> 
> On 16.10.21 04:23, Yong Wu wrote:
> > On Mon, 2021-10-11 at 14:36 +0200, Dafna Hirschfeld wrote:
> > > 
> > > On 29.09.21 03:37, Yong Wu wrote:
> > > > MediaTek IOMMU-SMI diagram is like below. all the consumer
> > > > connect
> > > > with
> > > > smi-larb, then connect with smi-common.
> > > > 
> > > >           M4U
> > > >            |
> > > >       smi-common
> > > >            |
> > > >     -------------
> > > >     |         |    ...
> > > >     |         |
> > > > larb1     larb2
> > > >     |         |
> > > > vdec       venc
> > > > 
> > > > When the consumer works, it should enable the smi-larb's power
> > > > which
> > > > also need enable the smi-common's power firstly.
> > > > 
> > > > Thus, First of all, use the device link connect the consumer
> > > > and
> > > > the
> > > > smi-larbs. then add device link between the smi-larb and smi-
> > > > common.
> > > > 
> > > > This patch adds device_link between the consumer and the larbs.
> > > > 
> > > > When device_link_add, I add the flag DL_FLAG_STATELESS to avoid
> > > > calling
> > > > pm_runtime_xx to keep the original status of clocks. It can
> > > > avoid
> > > > two
> > > > issues:
> > > > 1) Display HW show fastlogo abnormally reported in [1]. At the
> > > > beggining,
> > > > all the clocks are enabled before entering kernel, but the
> > > > clocks
> > > > for
> > > > display HW(always in larb0) will be gated after clk_enable and
> > > > clk_disable
> > > > called from device_link_add(->pm_runtime_resume) and rpm_idle.
> > > > The
> > > > clock
> > > > operation happened before display driver probe. At that time,
> > > > the
> > > > display
> > > > HW will be abnormal.
> > > > 
> > > > 2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to
> > > > skip
> > > > pm_runtime_xx to avoid the deadlock.
> > > > 
> > > > Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
> > > > device_link_removed should be added explicitly.
> > > > 
> > > > [1]
> > > > 
https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/
> > > > [2] https://lore.kernel.org/patchwork/patch/1086569/
> > > > 
> > > > Suggested-by: Tomasz Figa <tfiga@chromium.org>
> > > > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > > > Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-
> > > > R2/MT7623
> > > > ---
> > > >    drivers/iommu/mtk_iommu.c    | 22 ++++++++++++++++++++++
> > > >    drivers/iommu/mtk_iommu_v1.c | 20 +++++++++++++++++++-
> > > >    2 files changed, 41 insertions(+), 1 deletion(-)
> > > > 
> > > > diff --git a/drivers/iommu/mtk_iommu.c
> > > > b/drivers/iommu/mtk_iommu.c
> > > > index d5848f78a677..a2fa55899434 100644
> > > > --- a/drivers/iommu/mtk_iommu.c
> > > > +++ b/drivers/iommu/mtk_iommu.c
> > > > @@ -560,22 +560,44 @@ static struct iommu_device
> > > > *mtk_iommu_probe_device(struct device *dev)
> > > >    {
> > > >    	struct iommu_fwspec *fwspec =
> > > > dev_iommu_fwspec_get(dev);
> > > >    	struct mtk_iommu_data *data;
> > > > +	struct device_link *link;
> > > > +	struct device *larbdev;
> > > > +	unsigned int larbid;
> > > >    
> > > >    	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
> > > >    		return ERR_PTR(-ENODEV); /* Not a iommu client
> > > > device
> > > > */
> > > >    
> > > >    	data = dev_iommu_priv_get(dev);
> > > >    
> > > > +	/*
> > > > +	 * Link the consumer device with the smi-larb
> > > > device(supplier)
> > > > +	 * The device in each a larb is a independent HW. thus
> > > > only
> > > > link
> > > > +	 * one larb here.
> > > > +	 */
> > > > +	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
> > > 
> > > so larbid is always the same for all the ids of a device?
> > 
> > Yes. For me, each a dtsi node should represent a HW unit which can
> > only
> > connect one larb.
> > 
> > > If so maybe it worth testing it and return error if this is not
> > > the
> > > case.
> > 
> > Thanks for the suggestion. This is very helpful. I did see someone
> > put
> > the different larbs in one node. I will check this, and add return
> 
> I am working on bugs found on media drivers, could you please point
> me to
> that wrong node?
> Will you send a fix to that node in the dtsi?

sorry. I mean it happened in the internal branch and it has already
been fixed internally,  all the upstream nodes are ok for this.

Thanks
> 
> 
> Thanks,
> Dafna
> 
> > EINVAL for this case.
> 
> 
> 
> > 
> > > 
> > > Thanks,
> > > Dafna
> > 
> >   
> > > > 
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 04/12] iommu/mediatek: Add device_link between the consumer and the larb devices
@ 2021-10-25  3:57           ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-10-25  3:57 UTC (permalink / raw)
  To: Dafna Hirschfeld, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, youlin.pei, Matthias Kaehlcke, anan.sun,
	yi.kuo, acourbot, linux-media, dri-devel, Daniel Vetter,
	Chun-Kuang Hu, Philipp Zabel, Tiffany Lin, Hsin-Yi Wang,
	Eizan Miyamoto, anthony.huang, Frank Wunderlich

On Mon, 2021-10-18 at 09:13 +0200, Dafna Hirschfeld wrote:
> 
> On 16.10.21 04:23, Yong Wu wrote:
> > On Mon, 2021-10-11 at 14:36 +0200, Dafna Hirschfeld wrote:
> > > 
> > > On 29.09.21 03:37, Yong Wu wrote:
> > > > MediaTek IOMMU-SMI diagram is like below. all the consumer
> > > > connect
> > > > with
> > > > smi-larb, then connect with smi-common.
> > > > 
> > > >           M4U
> > > >            |
> > > >       smi-common
> > > >            |
> > > >     -------------
> > > >     |         |    ...
> > > >     |         |
> > > > larb1     larb2
> > > >     |         |
> > > > vdec       venc
> > > > 
> > > > When the consumer works, it should enable the smi-larb's power
> > > > which
> > > > also need enable the smi-common's power firstly.
> > > > 
> > > > Thus, First of all, use the device link connect the consumer
> > > > and
> > > > the
> > > > smi-larbs. then add device link between the smi-larb and smi-
> > > > common.
> > > > 
> > > > This patch adds device_link between the consumer and the larbs.
> > > > 
> > > > When device_link_add, I add the flag DL_FLAG_STATELESS to avoid
> > > > calling
> > > > pm_runtime_xx to keep the original status of clocks. It can
> > > > avoid
> > > > two
> > > > issues:
> > > > 1) Display HW show fastlogo abnormally reported in [1]. At the
> > > > beggining,
> > > > all the clocks are enabled before entering kernel, but the
> > > > clocks
> > > > for
> > > > display HW(always in larb0) will be gated after clk_enable and
> > > > clk_disable
> > > > called from device_link_add(->pm_runtime_resume) and rpm_idle.
> > > > The
> > > > clock
> > > > operation happened before display driver probe. At that time,
> > > > the
> > > > display
> > > > HW will be abnormal.
> > > > 
> > > > 2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to
> > > > skip
> > > > pm_runtime_xx to avoid the deadlock.
> > > > 
> > > > Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
> > > > device_link_removed should be added explicitly.
> > > > 
> > > > [1]
> > > > 
https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/
> > > > [2] https://lore.kernel.org/patchwork/patch/1086569/
> > > > 
> > > > Suggested-by: Tomasz Figa <tfiga@chromium.org>
> > > > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > > > Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-
> > > > R2/MT7623
> > > > ---
> > > >    drivers/iommu/mtk_iommu.c    | 22 ++++++++++++++++++++++
> > > >    drivers/iommu/mtk_iommu_v1.c | 20 +++++++++++++++++++-
> > > >    2 files changed, 41 insertions(+), 1 deletion(-)
> > > > 
> > > > diff --git a/drivers/iommu/mtk_iommu.c
> > > > b/drivers/iommu/mtk_iommu.c
> > > > index d5848f78a677..a2fa55899434 100644
> > > > --- a/drivers/iommu/mtk_iommu.c
> > > > +++ b/drivers/iommu/mtk_iommu.c
> > > > @@ -560,22 +560,44 @@ static struct iommu_device
> > > > *mtk_iommu_probe_device(struct device *dev)
> > > >    {
> > > >    	struct iommu_fwspec *fwspec =
> > > > dev_iommu_fwspec_get(dev);
> > > >    	struct mtk_iommu_data *data;
> > > > +	struct device_link *link;
> > > > +	struct device *larbdev;
> > > > +	unsigned int larbid;
> > > >    
> > > >    	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
> > > >    		return ERR_PTR(-ENODEV); /* Not a iommu client
> > > > device
> > > > */
> > > >    
> > > >    	data = dev_iommu_priv_get(dev);
> > > >    
> > > > +	/*
> > > > +	 * Link the consumer device with the smi-larb
> > > > device(supplier)
> > > > +	 * The device in each a larb is a independent HW. thus
> > > > only
> > > > link
> > > > +	 * one larb here.
> > > > +	 */
> > > > +	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
> > > 
> > > so larbid is always the same for all the ids of a device?
> > 
> > Yes. For me, each a dtsi node should represent a HW unit which can
> > only
> > connect one larb.
> > 
> > > If so maybe it worth testing it and return error if this is not
> > > the
> > > case.
> > 
> > Thanks for the suggestion. This is very helpful. I did see someone
> > put
> > the different larbs in one node. I will check this, and add return
> 
> I am working on bugs found on media drivers, could you please point
> me to
> that wrong node?
> Will you send a fix to that node in the dtsi?

sorry. I mean it happened in the internal branch and it has already
been fixed internally,  all the upstream nodes are ok for this.

Thanks
> 
> 
> Thanks,
> Dafna
> 
> > EINVAL for this case.
> 
> 
> 
> > 
> > > 
> > > Thanks,
> > > Dafna
> > 
> >   
> > > > 
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 105+ messages in thread

* Re: [PATCH v8 04/12] iommu/mediatek: Add device_link between the consumer and the larb devices
@ 2021-10-25  3:57           ` Yong Wu
  0 siblings, 0 replies; 105+ messages in thread
From: Yong Wu @ 2021-10-25  3:57 UTC (permalink / raw)
  To: Dafna Hirschfeld, Matthias Brugger, Joerg Roedel, Rob Herring,
	Krzysztof Kozlowski, David Airlie, Mauro Carvalho Chehab
  Cc: Evan Green, Robin Murphy, Tomasz Figa, Will Deacon,
	linux-mediatek, srv_heupstream, devicetree, linux-kernel,
	linux-arm-kernel, iommu, youlin.pei, Matthias Kaehlcke, anan.sun,
	yi.kuo, acourbot, linux-media, dri-devel, Daniel Vetter,
	Chun-Kuang Hu, Philipp Zabel, Tiffany Lin, Hsin-Yi Wang,
	Eizan Miyamoto, anthony.huang, Frank Wunderlich

On Mon, 2021-10-18 at 09:13 +0200, Dafna Hirschfeld wrote:
> 
> On 16.10.21 04:23, Yong Wu wrote:
> > On Mon, 2021-10-11 at 14:36 +0200, Dafna Hirschfeld wrote:
> > > 
> > > On 29.09.21 03:37, Yong Wu wrote:
> > > > MediaTek IOMMU-SMI diagram is like below. all the consumer
> > > > connect
> > > > with
> > > > smi-larb, then connect with smi-common.
> > > > 
> > > >           M4U
> > > >            |
> > > >       smi-common
> > > >            |
> > > >     -------------
> > > >     |         |    ...
> > > >     |         |
> > > > larb1     larb2
> > > >     |         |
> > > > vdec       venc
> > > > 
> > > > When the consumer works, it should enable the smi-larb's power
> > > > which
> > > > also need enable the smi-common's power firstly.
> > > > 
> > > > Thus, First of all, use the device link connect the consumer
> > > > and
> > > > the
> > > > smi-larbs. then add device link between the smi-larb and smi-
> > > > common.
> > > > 
> > > > This patch adds device_link between the consumer and the larbs.
> > > > 
> > > > When device_link_add, I add the flag DL_FLAG_STATELESS to avoid
> > > > calling
> > > > pm_runtime_xx to keep the original status of clocks. It can
> > > > avoid
> > > > two
> > > > issues:
> > > > 1) Display HW show fastlogo abnormally reported in [1]. At the
> > > > beggining,
> > > > all the clocks are enabled before entering kernel, but the
> > > > clocks
> > > > for
> > > > display HW(always in larb0) will be gated after clk_enable and
> > > > clk_disable
> > > > called from device_link_add(->pm_runtime_resume) and rpm_idle.
> > > > The
> > > > clock
> > > > operation happened before display driver probe. At that time,
> > > > the
> > > > display
> > > > HW will be abnormal.
> > > > 
> > > > 2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to
> > > > skip
> > > > pm_runtime_xx to avoid the deadlock.
> > > > 
> > > > Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
> > > > device_link_removed should be added explicitly.
> > > > 
> > > > [1]
> > > > 
https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/
> > > > [2] https://lore.kernel.org/patchwork/patch/1086569/
> > > > 
> > > > Suggested-by: Tomasz Figa <tfiga@chromium.org>
> > > > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > > > Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-
> > > > R2/MT7623
> > > > ---
> > > >    drivers/iommu/mtk_iommu.c    | 22 ++++++++++++++++++++++
> > > >    drivers/iommu/mtk_iommu_v1.c | 20 +++++++++++++++++++-
> > > >    2 files changed, 41 insertions(+), 1 deletion(-)
> > > > 
> > > > diff --git a/drivers/iommu/mtk_iommu.c
> > > > b/drivers/iommu/mtk_iommu.c
> > > > index d5848f78a677..a2fa55899434 100644
> > > > --- a/drivers/iommu/mtk_iommu.c
> > > > +++ b/drivers/iommu/mtk_iommu.c
> > > > @@ -560,22 +560,44 @@ static struct iommu_device
> > > > *mtk_iommu_probe_device(struct device *dev)
> > > >    {
> > > >    	struct iommu_fwspec *fwspec =
> > > > dev_iommu_fwspec_get(dev);
> > > >    	struct mtk_iommu_data *data;
> > > > +	struct device_link *link;
> > > > +	struct device *larbdev;
> > > > +	unsigned int larbid;
> > > >    
> > > >    	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
> > > >    		return ERR_PTR(-ENODEV); /* Not a iommu client
> > > > device
> > > > */
> > > >    
> > > >    	data = dev_iommu_priv_get(dev);
> > > >    
> > > > +	/*
> > > > +	 * Link the consumer device with the smi-larb
> > > > device(supplier)
> > > > +	 * The device in each a larb is a independent HW. thus
> > > > only
> > > > link
> > > > +	 * one larb here.
> > > > +	 */
> > > > +	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
> > > 
> > > so larbid is always the same for all the ids of a device?
> > 
> > Yes. For me, each a dtsi node should represent a HW unit which can
> > only
> > connect one larb.
> > 
> > > If so maybe it worth testing it and return error if this is not
> > > the
> > > case.
> > 
> > Thanks for the suggestion. This is very helpful. I did see someone
> > put
> > the different larbs in one node. I will check this, and add return
> 
> I am working on bugs found on media drivers, could you please point
> me to
> that wrong node?
> Will you send a fix to that node in the dtsi?

sorry. I mean it happened in the internal branch and it has already
been fixed internally,  all the upstream nodes are ok for this.

Thanks
> 
> 
> Thanks,
> Dafna
> 
> > EINVAL for this case.
> 
> 
> 
> > 
> > > 
> > > Thanks,
> > > Dafna
> > 
> >   
> > > > 
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 105+ messages in thread

end of thread, other threads:[~2021-10-25  3:59 UTC | newest]

Thread overview: 105+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-29  1:37 [PATCH v8 00/12] Clean up "mediatek,larb" Yong Wu
2021-09-29  1:37 ` Yong Wu
2021-09-29  1:37 ` Yong Wu
2021-09-29  1:37 ` Yong Wu
2021-09-29  1:37 ` Yong Wu
2021-09-29  1:37 ` [PATCH v8 01/12] dt-binding: mediatek: Get rid of mediatek, larb for multimedia HW Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37 ` [PATCH v8 02/12] iommu/mediatek-v1: Free the existed fwspec if the master dev already has Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37 ` [PATCH v8 03/12] iommu/mediatek: Add probe_defer for smi-larb Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29 16:33   ` Dafna Hirschfeld
2021-09-29 16:33     ` Dafna Hirschfeld
2021-09-29 16:33     ` Dafna Hirschfeld
2021-09-29 16:33     ` Dafna Hirschfeld
2021-09-30  7:14     ` Yong Wu
2021-09-30  7:14       ` Yong Wu
2021-09-30  7:14       ` Yong Wu
2021-09-30  7:14       ` Yong Wu
2021-09-29  1:37 ` [PATCH v8 04/12] iommu/mediatek: Add device_link between the consumer and the larb devices Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-10-11 12:36   ` Dafna Hirschfeld
2021-10-11 12:36     ` Dafna Hirschfeld
2021-10-11 12:36     ` Dafna Hirschfeld
2021-10-11 12:36     ` Dafna Hirschfeld
2021-10-16  2:23     ` Yong Wu
2021-10-16  2:23       ` Yong Wu
2021-10-16  2:23       ` Yong Wu
2021-10-16  2:23       ` Yong Wu
2021-10-18  7:13       ` Dafna Hirschfeld
2021-10-18  7:13         ` Dafna Hirschfeld
2021-10-18  7:13         ` Dafna Hirschfeld
2021-10-18  7:13         ` Dafna Hirschfeld
2021-10-25  3:57         ` Yong Wu
2021-10-25  3:57           ` Yong Wu
2021-10-25  3:57           ` Yong Wu
2021-10-25  3:57           ` Yong Wu
2021-09-29  1:37 ` [PATCH v8 05/12] media: mtk-jpeg: Get rid of mtk_smi_larb_get/put Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37 ` [PATCH v8 06/12] media: mtk-mdp: " Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37 ` [PATCH v8 07/12] drm/mediatek: Add pm runtime support for ovl and rdma Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37 ` [PATCH v8 08/12] drm/mediatek: Get rid of mtk_smi_larb_get/put Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37 ` [PATCH v8 09/12] media: mtk-vcodec: " Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29 12:13   ` Dafna Hirschfeld
2021-09-29 12:13     ` Dafna Hirschfeld
2021-09-29 12:13     ` Dafna Hirschfeld
2021-09-29 12:13     ` Dafna Hirschfeld
2021-09-30  3:28     ` Yong Wu
2021-09-30  3:28       ` Yong Wu
2021-09-30  3:28       ` Yong Wu
2021-09-30  3:28       ` Yong Wu
2021-09-30 10:57       ` Dafna Hirschfeld
2021-09-30 10:57         ` Dafna Hirschfeld
2021-09-30 10:57         ` Dafna Hirschfeld
2021-09-30 10:57         ` Dafna Hirschfeld
2021-10-07  2:57         ` Yong Wu
2021-10-07  2:57           ` Yong Wu
2021-10-07  2:57           ` Yong Wu
2021-10-07  2:57           ` Yong Wu
2021-09-29  1:37 ` [PATCH v8 10/12] memory: mtk-smi: " Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37 ` [PATCH v8 11/12] arm: dts: mediatek: Get rid of mediatek,larb for MM nodes Yong Wu
2021-09-29  1:37   ` [PATCH v8 11/12] arm: dts: mediatek: Get rid of mediatek, larb " Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37 ` [PATCH v8 12/12] arm64: dts: mediatek: Get rid of mediatek,larb " Yong Wu
2021-09-29  1:37   ` [PATCH v8 12/12] arm64: dts: mediatek: Get rid of mediatek, larb " Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu
2021-09-29  1:37   ` Yong Wu

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.