All of lore.kernel.org
 help / color / mirror / Atom feed
From: Archana Muniganti <marchana@marvell.com>
To: <gakhil@marvell.com>, <radu.nicolau@intel.com>,
	<roy.fan.zhang@intel.com>,  <hemant.agrawal@nxp.com>,
	<konstantin.ananyev@intel.com>
Cc: Archana Muniganti <marchana@marvell.com>, <anoobj@marvell.com>,
	<ktejasree@marvell.com>, <adwivedi@marvell.com>,
	<jerinj@marvell.com>, <dev@dpdk.org>
Subject: [dpdk-dev] [PATCH v2 1/3] security: add SA config option for inner pkt csum
Date: Wed, 29 Sep 2021 14:38:09 +0530	[thread overview]
Message-ID: <20210929090811.21030-2-marchana@marvell.com> (raw)
In-Reply-To: <20210929090811.21030-1-marchana@marvell.com>

Add inner packet IPv4 hdr and L4 checksum enable options
in conf. These will be used in case of protocol offload.
Per SA, application could specify whether the
checksum(compute/verify) can be offloaded to security device.

Signed-off-by: Archana Muniganti <marchana@marvell.com>
---
 doc/guides/cryptodevs/features/default.ini |  1 +
 doc/guides/rel_notes/deprecation.rst       |  4 ++--
 doc/guides/rel_notes/release_21_11.rst     |  4 ++++
 lib/cryptodev/rte_cryptodev.h              |  2 ++
 lib/security/rte_security.h                | 18 ++++++++++++++++++
 5 files changed, 27 insertions(+), 2 deletions(-)

diff --git a/doc/guides/cryptodevs/features/default.ini b/doc/guides/cryptodevs/features/default.ini
index c24814de98..96d95ddc81 100644
--- a/doc/guides/cryptodevs/features/default.ini
+++ b/doc/guides/cryptodevs/features/default.ini
@@ -33,6 +33,7 @@ Non-Byte aligned data  =
 Sym raw data path API  =
 Cipher multiple data units =
 Cipher wrapped key     =
+Inner checksum         =
 
 ;
 ; Supported crypto algorithms of a default crypto driver.
diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst
index 05fc2fdee7..8308e00ed4 100644
--- a/doc/guides/rel_notes/deprecation.rst
+++ b/doc/guides/rel_notes/deprecation.rst
@@ -232,8 +232,8 @@ Deprecation Notices
   IPsec payload MSS (Maximum Segment Size), and ESN (Extended Sequence Number).
 
 * security: The IPsec SA config options ``struct rte_security_ipsec_sa_options``
-  will be updated with new fields to support new features like IPsec inner
-  checksum, TSO in case of protocol offload.
+  will be updated with new fields to support new features like TSO in case of
+  protocol offload.
 
 * ipsec: The structure ``rte_ipsec_sa_prm`` will be extended with a new field
   ``hdr_l3_len`` to configure tunnel L3 header length.
diff --git a/doc/guides/rel_notes/release_21_11.rst b/doc/guides/rel_notes/release_21_11.rst
index 8da851cccc..93d1b36889 100644
--- a/doc/guides/rel_notes/release_21_11.rst
+++ b/doc/guides/rel_notes/release_21_11.rst
@@ -194,6 +194,10 @@ ABI Changes
   ``rte_security_ipsec_xform`` to allow applications to configure SA soft
   and hard expiry limits. Limits can be either in number of packets or bytes.
 
+* security: The new options ``ip_csum_enable`` and ``l4_csum_enable`` were added
+  in structure ``rte_security_ipsec_sa_options`` to indicate whether inner
+  packet IPv4 header checksum and L4 checksum need to be offloaded to
+  security device.
 
 Known Issues
 ------------
diff --git a/lib/cryptodev/rte_cryptodev.h b/lib/cryptodev/rte_cryptodev.h
index bb01f0f195..d9271a6c45 100644
--- a/lib/cryptodev/rte_cryptodev.h
+++ b/lib/cryptodev/rte_cryptodev.h
@@ -479,6 +479,8 @@ rte_cryptodev_asym_get_xform_enum(enum rte_crypto_asym_xform_type *xform_enum,
 /**< Support operations on multiple data-units message */
 #define RTE_CRYPTODEV_FF_CIPHER_WRAPPED_KEY		(1ULL << 26)
 /**< Support wrapped key in cipher xform  */
+#define RTE_CRYPTODEV_FF_SECURITY_INNER_CSUM		(1ULL << 27)
+/**< Support inner checksum computation/verification */
 
 /**
  * Get the name of a crypto device feature flag
diff --git a/lib/security/rte_security.h b/lib/security/rte_security.h
index ab1a6e1f65..945f45ad76 100644
--- a/lib/security/rte_security.h
+++ b/lib/security/rte_security.h
@@ -230,6 +230,24 @@ struct rte_security_ipsec_sa_options {
 	 * * 0: Do not match UDP ports
 	 */
 	uint32_t udp_ports_verify : 1;
+
+	/** Compute/verify inner packet IPv4 header checksum in tunnel mode
+	 *
+	 * * 1: For outbound, compute inner packet IPv4 header checksum
+	 *      before tunnel encapsulation and for inbound, verify after
+	 *      tunnel decapsulation.
+	 * * 0: Inner packet IP header checksum is not computed/verified.
+	 */
+	uint32_t ip_csum_enable : 1;
+
+	/** Compute/verify inner packet L4 checksum in tunnel mode
+	 *
+	 * * 1: For outbound, compute inner packet L4 checksum before
+	 *      tunnel encapsulation and for inbound, verify after
+	 *      tunnel decapsulation.
+	 * * 0: Inner packet L4 checksum is not computed/verified.
+	 */
+	uint32_t l4_csum_enable : 1;
 };
 
 /** IPSec security association direction */
-- 
2.22.0


  reply	other threads:[~2021-09-29  9:08 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-29  9:08 [dpdk-dev] [PATCH v2 0/3] add SA config option for inner pkt csum Archana Muniganti
2021-09-29  9:08 ` Archana Muniganti [this message]
2021-09-29 10:56   ` [dpdk-dev] [PATCH v2 1/3] security: " Ananyev, Konstantin
2021-09-29 11:03     ` Anoob Joseph
2021-09-29 11:39       ` Ananyev, Konstantin
2021-09-30  5:05         ` Anoob Joseph
2021-09-30  9:09           ` Ananyev, Konstantin
2021-09-29  9:08 ` [dpdk-dev] [PATCH v2 2/3] crypto/cnxk: add inner checksum Archana Muniganti
2021-09-29  9:08 ` [dpdk-dev] [PATCH v2 3/3] test/crypto: add inner checksum cases Archana Muniganti

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210929090811.21030-2-marchana@marvell.com \
    --to=marchana@marvell.com \
    --cc=adwivedi@marvell.com \
    --cc=anoobj@marvell.com \
    --cc=dev@dpdk.org \
    --cc=gakhil@marvell.com \
    --cc=hemant.agrawal@nxp.com \
    --cc=jerinj@marvell.com \
    --cc=konstantin.ananyev@intel.com \
    --cc=ktejasree@marvell.com \
    --cc=radu.nicolau@intel.com \
    --cc=roy.fan.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.