All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vladimir Oltean <vladimir.oltean@nxp.com>
To: u-boot@lists.denx.de, Joe Hershberger <joe.hershberger@ni.com>,
	Ramon Fried <rfried.dev@gmail.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>,
	Bin Meng <bmeng.cn@gmail.com>, Michael Walle <michael@walle.cc>
Subject: [PATCH v2 09/10] configs: ls1021a-tsn: enable sja1105 switch driver
Date: Wed, 29 Sep 2021 18:04:44 +0300	[thread overview]
Message-ID: <20210929150445.1593364-10-vladimir.oltean@nxp.com> (raw)
In-Reply-To: <20210929150445.1593364-1-vladimir.oltean@nxp.com>

The sja1105 is a 5-port switch that uses a DM_DSA driver. Its 5th (CPU)
port is connected internally to the eth2 port of the LS1021A SoC.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
---
v1->v2: none

 configs/ls1021atsn_qspi_defconfig   | 2 ++
 configs/ls1021atsn_sdcard_defconfig | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/configs/ls1021atsn_qspi_defconfig b/configs/ls1021atsn_qspi_defconfig
index 6103ab32a49e..cb89f73583d9 100644
--- a/configs/ls1021atsn_qspi_defconfig
+++ b/configs/ls1021atsn_qspi_defconfig
@@ -44,6 +44,8 @@ CONFIG_PHY_BROADCOM=y
 CONFIG_PHY_FIXED=y
 CONFIG_DM_ETH=y
 CONFIG_DM_MDIO=y
+CONFIG_DM_DSA=y
+CONFIG_SJA1105=y
 CONFIG_PHY_GIGE=y
 CONFIG_MII=y
 CONFIG_TSEC_ENET=y
diff --git a/configs/ls1021atsn_sdcard_defconfig b/configs/ls1021atsn_sdcard_defconfig
index 8cc0360ae7c5..49cd3edcb68c 100644
--- a/configs/ls1021atsn_sdcard_defconfig
+++ b/configs/ls1021atsn_sdcard_defconfig
@@ -55,6 +55,8 @@ CONFIG_PHY_BROADCOM=y
 CONFIG_PHY_FIXED=y
 CONFIG_DM_ETH=y
 CONFIG_DM_MDIO=y
+CONFIG_DM_DSA=y
+CONFIG_SJA1105=y
 CONFIG_PHY_GIGE=y
 CONFIG_MII=y
 CONFIG_TSEC_ENET=y
-- 
2.25.1


  parent reply	other threads:[~2021-09-29 15:06 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-29 15:04 [PATCH v2 00/10] Support the SJA1105 DSA switch on the NXP LS1021A-TSN board Vladimir Oltean
2021-09-29 15:04 ` [PATCH v2 01/10] net: tsec: add support for promiscuous mode Vladimir Oltean
2021-10-16 18:30   ` Ramon Fried
2021-10-28 18:45     ` Ramon Fried
2021-10-30  7:45       ` Ramon Fried
2021-09-29 15:04 ` [PATCH v2 02/10] include: import if_vlan.h from Linux Vladimir Oltean
2021-09-29 15:04 ` [PATCH v2 03/10] net: dsa: allow drivers to get the port OF node Vladimir Oltean
2021-09-29 15:04 ` [PATCH v2 04/10] net: introduce a helper to determine whether to use in-band autoneg Vladimir Oltean
2021-09-29 23:20   ` Bin Meng
2021-10-16 18:28     ` Ramon Fried
2021-09-29 15:04 ` [PATCH v2 05/10] net: dsa: felix: configure the in-band autoneg property based on OF node info Vladimir Oltean
2021-09-29 15:04 ` [PATCH v2 06/10] net: dsa: add driver for NXP SJA1105 L2 switch Vladimir Oltean
2021-09-29 15:04 ` [PATCH v2 07/10] net: dsa: sja1105: add support for SGMII Vladimir Oltean
2021-09-29 15:04 ` [PATCH v2 08/10] arm: dts: ls1021a-tsn: add sja1105 and eth2 bindings Vladimir Oltean
2021-09-29 15:04 ` Vladimir Oltean [this message]
2021-09-29 15:04 ` [PATCH v2 10/10] configs: ls1021a-tsn: enable the generation of random Ethernet MAC addresses Vladimir Oltean

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210929150445.1593364-10-vladimir.oltean@nxp.com \
    --to=vladimir.oltean@nxp.com \
    --cc=bmeng.cn@gmail.com \
    --cc=joe.hershberger@ni.com \
    --cc=michael@walle.cc \
    --cc=priyanka.jain@nxp.com \
    --cc=rfried.dev@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.