All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Marek Behún" <kabel@kernel.org>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: "Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	linux-pci@vger.kernel.org, pali@kernel.org,
	"Marek Behún" <kabel@kernel.org>,
	stable@vger.kernel.org
Subject: [PATCH 05/13] PCI: aardvark: Fix configuring Reference clock
Date: Fri,  1 Oct 2021 21:58:48 +0200	[thread overview]
Message-ID: <20211001195856.10081-6-kabel@kernel.org> (raw)
In-Reply-To: <20211001195856.10081-1-kabel@kernel.org>

From: Pali Rohár <pali@kernel.org>

Commit 366697018c9a ("PCI: aardvark: Add PHY support") introduced
configuration of PCIe Reference clock via PCIE_CORE_REF_CLK_REG register,
but did it incorrectly.

PCIe Reference clock differential pair is routed from system board to
endpoint card, so on CPU side it has output direction. Therefore it is
required to enable transmitting and disable receiving.

Default configuration according to Armada 3700 Functional Specifications is
enabled receiver part and disabled transmitter.

We need this change because otherwise PCIe Reference clock is configured to
some undefined state when differential pair is used for both transmitting
and receiving.

Fix this by disabling receiver part.

Fixes: 366697018c9a ("PCI: aardvark: Add PHY support")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: stable@vger.kernel.org
---
 drivers/pci/controller/pci-aardvark.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index bb57ca6aed35..d5d6f92e5143 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -99,6 +99,7 @@
 #define     PCIE_CORE_CTRL2_MSI_ENABLE		BIT(10)
 #define PCIE_CORE_REF_CLK_REG			(CONTROL_BASE_ADDR + 0x14)
 #define     PCIE_CORE_REF_CLK_TX_ENABLE		BIT(1)
+#define     PCIE_CORE_REF_CLK_RX_ENABLE		BIT(2)
 #define PCIE_MSG_LOG_REG			(CONTROL_BASE_ADDR + 0x30)
 #define PCIE_ISR0_REG				(CONTROL_BASE_ADDR + 0x40)
 #define PCIE_MSG_PM_PME_MASK			BIT(7)
@@ -451,9 +452,15 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
 	u32 reg;
 	int i;
 
-	/* Enable TX */
+	/*
+	 * Configure PCIe Reference clock. Direction is from the PCIe
+	 * controller to the endpoint card, so enable transmitting of
+	 * Reference clock differential signal off-chip and disable
+	 * receiving off-chip differential signal.
+	 */
 	reg = advk_readl(pcie, PCIE_CORE_REF_CLK_REG);
 	reg |= PCIE_CORE_REF_CLK_TX_ENABLE;
+	reg &= ~PCIE_CORE_REF_CLK_RX_ENABLE;
 	advk_writel(pcie, reg, PCIE_CORE_REF_CLK_REG);
 
 	/* Set to Direct mode */
-- 
2.32.0


  parent reply	other threads:[~2021-10-01 19:59 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-01 19:58 [PATCH 00/13] PCI: aardvark controller fixes Marek Behún
2021-10-01 19:58 ` [PATCH 01/13] PCI: Add PCI_EXP_DEVCTL_PAYLOAD_* macros Marek Behún
2021-10-02 16:05   ` Bjorn Helgaas
2021-10-04  8:43   ` Lorenzo Pieralisi
2021-10-04  9:32     ` Marek Behún
2021-10-04  9:35       ` Lorenzo Pieralisi
2021-10-01 19:58 ` [PATCH 02/13] PCI: aardvark: Fix PCIe Max Payload Size setting Marek Behún
2021-10-03 17:44   ` Marek Behún
2021-10-01 19:58 ` [PATCH 03/13] PCI: aardvark: Don't spam about PIO Response Status Marek Behún
2021-10-01 19:58 ` [PATCH 04/13] PCI: aardvark: Fix preserving PCI_EXP_RTCTL_CRSSVE flag on emulated bridge Marek Behún
2021-10-01 19:58 ` Marek Behún [this message]
2021-10-01 19:58 ` [PATCH 06/13] PCI: aardvark: Do not clear status bits of masked interrupts Marek Behún
2021-10-04 14:06   ` Lorenzo Pieralisi
2021-10-04 15:18     ` Marek Behún
2021-10-04 15:31     ` Marc Zyngier
2021-10-05 12:13       ` Marek Behún
2021-10-05 12:42         ` Marc Zyngier
2021-10-05 13:15           ` Pali Rohár
2021-10-05 15:42             ` Marc Zyngier
2021-10-05 18:48               ` Pali Rohár
2021-10-05 16:04             ` Lorenzo Pieralisi
2021-10-01 19:58 ` [PATCH 07/13] PCI: aardvark: Do not unmask unused interrupts Marek Behún
2021-10-01 19:58 ` [PATCH 08/13] PCI: aardvark: Deduplicate code in advk_pcie_rd_conf() Marek Behún
2021-10-01 19:58 ` [PATCH 09/13] PCI: aardvark: Implement re-issuing config requests on CRS response Marek Behún
2021-10-02 16:35   ` Bjorn Helgaas
2021-10-04  7:21     ` Marek Behún
2021-10-04  8:53       ` Lorenzo Pieralisi
2021-10-04 10:19         ` Marek Behún
2021-10-05 19:28           ` Bjorn Helgaas
2021-10-05 22:45             ` Marek Behún
2021-10-11 18:15               ` Usage of PCBIOS_* macros (Was: Re: [PATCH 09/13] PCI: aardvark: Implement re-issuing config requests on CRS response) Pali Rohár
2021-10-11 20:58                 ` Bjorn Helgaas
2021-10-06 16:29             ` [PATCH 09/13] PCI: aardvark: Implement re-issuing config requests on CRS response Lorenzo Pieralisi
2021-10-06 20:13               ` Bjorn Helgaas
2021-10-07 11:51                 ` Lorenzo Pieralisi
2021-10-07 12:36                   ` Marek Behún
2021-10-07 19:25                     ` Bjorn Helgaas
2021-10-01 19:58 ` [PATCH 10/13] PCI: aardvark: Simplify initialization of rootcap on virtual bridge Marek Behún
2021-10-04  9:44   ` Lorenzo Pieralisi
2021-10-04  9:56     ` Marek Behún
2021-10-04 10:10       ` Lorenzo Pieralisi
2021-10-01 19:58 ` [PATCH 11/13] PCI: aardvark: Fix link training Marek Behún
2021-10-01 19:58 ` [PATCH 12/13] PCI: aardvark: Fix checking for link up via LTSSM state Marek Behún
2021-10-04 13:35   ` Lorenzo Pieralisi
2021-10-01 19:58 ` [PATCH 13/13] PCI: aardvark: Fix reporting Data Link Layer Link Active Marek Behún
2021-10-04  9:53 ` [PATCH 00/13] PCI: aardvark controller fixes Lorenzo Pieralisi
2021-10-04 10:40   ` Marek Behún

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211001195856.10081-6-kabel@kernel.org \
    --to=kabel@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=pali@kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.