[PATCH 4.9 00/57] 4.9.285-rc1 review

[PATCH 4.9 00/57] 4.9.285-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.9.285 release.
There are 57 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 06 Oct 2021 12:50:17 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.285-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.9.285-rc1

Yanfei Xu <yanfei.xu@windriver.com>
    net: mdiobus: Fix memory leak in __mdiobus_register

Anirudh Rayabharam <mail@anirudhrb.com>
    HID: usbhid: free raw_report buffers in usbhid_stop

Jozsef Kadlecsik <kadlec@netfilter.org>
    netfilter: ipset: Fix oversized kvmalloc() calls

F.A.Sulaiman <asha.16@itfac.mrt.ac.lk>
    HID: betop: fix slab-out-of-bounds Write in betop_probe

Suzuki K Poulose <suzuki.poulose@arm.com>
    arm64: Extend workaround for erratum 1024718 to all versions of Cortex-A55

Alex Sverdlin <alexander.sverdlin@nokia.com>
    ARM: 9098/1: ftrace: MODULE_PLT: Fix build problem without DYNAMIC_FTRACE

Alex Sverdlin <alexander.sverdlin@nokia.com>
    ARM: 9079/1: ftrace: Add MODULE_PLTS support

Alex Sverdlin <alexander.sverdlin@nokia.com>
    ARM: 9078/1: Add warn suppress parameter to arm_gen_branch_link()

Alex Sverdlin <alexander.sverdlin@nokia.com>
    ARM: 9077/1: PLT: Move struct plt_entries definition to header

Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
    EDAC/synopsys: Fix wrong value type assignment for edac_mode

Eric Dumazet <edumazet@google.com>
    net: udp: annotate data race around udp_sk(sk)->corkflag

yangerkun <yangerkun@huawei.com>
    ext4: fix potential infinite loop in ext4_dx_readdir()

Johan Hovold <johan@kernel.org>
    ipack: ipoctal: fix module reference leak

Johan Hovold <johan@kernel.org>
    ipack: ipoctal: fix missing allocation-failure check

Johan Hovold <johan@kernel.org>
    ipack: ipoctal: fix tty-registration error handling

Johan Hovold <johan@kernel.org>
    ipack: ipoctal: fix tty registration race

Johan Hovold <johan@kernel.org>
    ipack: ipoctal: fix stack information leak

Jacob Keller <jacob.e.keller@intel.com>
    e100: fix buffer overrun in e100_get_regs

Jacob Keller <jacob.e.keller@intel.com>
    e100: fix length calculation in e100_get_regs_len

Paul Fertser <fercerpav@gmail.com>
    hwmon: (tmp421) fix rounding for negative values

Lorenzo Bianconi <lorenzo@kernel.org>
    mac80211: limit injected vht mcs/nss in ieee80211_parse_tx_radiotap

Andrea Claudi <aclaudi@redhat.com>
    ipvs: check that ip_vs_conn_tab_bits is between 8 and 20

Johannes Berg <johannes.berg@intel.com>
    mac80211: fix use-after-free in CCMP/GCMP RX

James Morse <james.morse@arm.com>
    cpufreq: schedutil: Destroy mutex before kobject_put() frees the memory

Kevin Hao <haokexin@gmail.com>
    cpufreq: schedutil: Use kobject release() method to free sugov_tunables

Igor Matheus Andrade Torrente <igormtorrente@gmail.com>
    tty: Fix out-of-bound vmalloc access in imageblit

Linus Torvalds <torvalds@linux-foundation.org>
    qnx4: work around gcc false positive warning bug

Pali Rohár <pali@kernel.org>
    arm64: dts: marvell: armada-37xx: Extend PCIe MEM space

Linus Torvalds <torvalds@linux-foundation.org>
    spi: Fix tegra20 build with CONFIG_PM=n

Guenter Roeck <linux@roeck-us.net>
    net: 6pack: Fix tx timeout and slot time

Guenter Roeck <linux@roeck-us.net>
    alpha: Declare virt_to_phys and virt_to_bus parameter as pointer to volatile

Dan Li <ashimida@linux.alibaba.com>
    arm64: Mark __stack_chk_guard as __ro_after_init

Helge Deller <deller@gmx.de>
    parisc: Use absolute_pointer() to define PAGE0

Linus Torvalds <torvalds@linux-foundation.org>
    qnx4: avoid stringop-overread errors

Linus Torvalds <torvalds@linux-foundation.org>
    sparc: avoid stringop-overread errors

Guenter Roeck <linux@roeck-us.net>
    net: i825xx: Use absolute_pointer for memcpy from fixed memory location

Guenter Roeck <linux@roeck-us.net>
    compiler.h: Introduce absolute_pointer macro

Guenter Roeck <linux@roeck-us.net>
    m68k: Double cast io functions to unsigned long

Jesper Nilsson <jesper.nilsson@axis.com>
    net: stmmac: allow CSR clock of 300MHz

Zhihao Cheng <chengzhihao1@huawei.com>
    blktrace: Fix uaf in blk_trace access after removing by sysfs

Baokun Li <libaokun1@huawei.com>
    scsi: iscsi: Adjust iface sysfs attr detection

Aya Levin <ayal@nvidia.com>
    net/mlx4_en: Don't allow aRFS for encapsulated packets

Johan Hovold <johan@kernel.org>
    net: hso: fix muxed tty registration

Pali Rohár <pali@kernel.org>
    serial: mvebu-uart: fix driver's tx_empty callback

Dan Carpenter <dan.carpenter@oracle.com>
    mcb: fix error handling in mcb_alloc_bus()

Slark Xiao <slark_xiao@163.com>
    USB: serial: option: add device id for Foxconn T99W265

Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
    USB: serial: option: remove duplicate USB device ID

Carlo Lobrano <c.lobrano@gmail.com>
    USB: serial: option: add Telit LN920 compositions

Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
    USB: serial: mos7840: remove duplicated 0xac24 device ID

Johan Hovold <johan@kernel.org>
    staging: greybus: uart: fix tty use after free

Uwe Brandt <uwe.brandt@gmail.com>
    USB: serial: cp210x: add ID for GW Instek GDM-834x Digital Multimeter

Ondrej Zary <linux@zary.sk>
    usb-storage: Add quirk for ScanLogic SL11R-IDE older than 2.6c

Jan Beulich <jbeulich@suse.com>
    xen/x86: fix PV trap handling on secondary processors

Steve French <stfrench@microsoft.com>
    cifs: fix incorrect check for null pointer in header_assemble

Dan Carpenter <dan.carpenter@oracle.com>
    usb: musb: tusb6010: uninitialized data in tusb_fifo_write_unaligned()

Dan Carpenter <dan.carpenter@oracle.com>
    usb: gadget: r8a66597: fix a loop in set_feature()

Wengang Wang <wen.gang.wang@oracle.com>
    ocfs2: drop acl cache for directories too


-------------

Diffstat:

 Makefile                                          |  4 +-
 arch/alpha/include/asm/io.h                       |  6 +-
 arch/arm/include/asm/ftrace.h                     |  3 +
 arch/arm/include/asm/insn.h                       |  8 +--
 arch/arm/include/asm/module.h                     | 10 ++++
 arch/arm/kernel/ftrace.c                          | 45 ++++++++++++---
 arch/arm/kernel/insn.c                            | 19 ++++---
 arch/arm/kernel/module-plts.c                     | 49 ++++++++++++----
 arch/arm64/Kconfig                                |  2 +-
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi      | 11 +++-
 arch/arm64/kernel/process.c                       |  2 +-
 arch/arm64/mm/proc.S                              |  4 +-
 arch/m68k/include/asm/raw_io.h                    | 20 +++----
 arch/parisc/include/asm/page.h                    |  2 +-
 arch/sparc/kernel/mdesc.c                         |  3 +-
 arch/x86/xen/enlighten.c                          | 15 +++--
 drivers/cpufreq/cpufreq_governor_attr_set.c       |  2 +-
 drivers/edac/synopsys_edac.c                      |  2 +-
 drivers/hid/hid-betopff.c                         | 13 ++++-
 drivers/hid/usbhid/hid-core.c                     | 13 ++++-
 drivers/hwmon/tmp421.c                            | 24 +++-----
 drivers/ipack/devices/ipoctal.c                   | 63 +++++++++++++++------
 drivers/mcb/mcb-core.c                            | 12 ++--
 drivers/net/ethernet/i825xx/82596.c               |  2 +-
 drivers/net/ethernet/intel/e100.c                 | 22 +++++---
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c    |  3 +
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c |  2 +-
 drivers/net/hamradio/6pack.c                      |  4 +-
 drivers/net/phy/mdio_bus.c                        |  1 +
 drivers/net/usb/hso.c                             | 12 ++--
 drivers/scsi/scsi_transport_iscsi.c               |  8 +--
 drivers/spi/spi-tegra20-slink.c                   |  4 +-
 drivers/staging/greybus/uart.c                    | 62 ++++++++++----------
 drivers/tty/serial/mvebu-uart.c                   |  2 +-
 drivers/tty/vt/vt.c                               | 21 ++++++-
 drivers/usb/gadget/udc/r8a66597-udc.c             |  2 +-
 drivers/usb/musb/tusb6010.c                       |  1 +
 drivers/usb/serial/cp210x.c                       |  1 +
 drivers/usb/serial/mos7840.c                      |  2 -
 drivers/usb/serial/option.c                       | 11 +++-
 drivers/usb/storage/unusual_devs.h                |  9 ++-
 fs/cifs/connect.c                                 |  5 +-
 fs/ext4/dir.c                                     |  6 +-
 fs/ocfs2/dlmglue.c                                |  3 +-
 fs/qnx4/dir.c                                     | 69 +++++++++++++++++------
 include/linux/compiler.h                          |  2 +
 kernel/sched/cpufreq_schedutil.c                  | 16 ++++--
 kernel/trace/blktrace.c                           |  8 +++
 net/ipv4/udp.c                                    | 10 ++--
 net/ipv6/udp.c                                    |  2 +-
 net/mac80211/tx.c                                 |  4 ++
 net/mac80211/wpa.c                                |  6 ++
 net/netfilter/ipset/ip_set_hash_gen.h             |  4 +-
 net/netfilter/ipvs/ip_vs_conn.c                   |  4 ++
 54 files changed, 438 insertions(+), 202 deletions(-)

[PATCH 4.9 01/57] ocfs2: drop acl cache for directories too

[Greg Kroah-Hartman]

From: Wengang Wang <wen.gang.wang@oracle.com>

commit 9c0f0a03e386f4e1df33db676401547e1b7800c6 upstream.

ocfs2_data_convert_worker() is currently dropping any cached acl info
for FILE before down-converting meta lock.  It should also drop for
DIRECTORY.  Otherwise the second acl lookup returns the cached one (from
VFS layer) which could be already stale.

The problem we are seeing is that the acl changes on one node doesn't
get refreshed on other nodes in the following case:

  Node 1                    Node 2
  --------------            ----------------
  getfacl dir1

                            getfacl dir1    <-- this is OK

  setfacl -m u:user1:rwX dir1
  getfacl dir1   <-- see the change for user1

                            getfacl dir1    <-- can't see change for user1

Link: https://lkml.kernel.org/r/20210903012631.6099-1-wen.gang.wang@oracle.com
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ocfs2/dlmglue.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -3704,7 +3704,7 @@ static int ocfs2_data_convert_worker(str
 		oi = OCFS2_I(inode);
 		oi->ip_dir_lock_gen++;
 		mlog(0, "generation: %u\n", oi->ip_dir_lock_gen);
-		goto out;
+		goto out_forget;
 	}
 
 	if (!S_ISREG(inode->i_mode))
@@ -3735,6 +3735,7 @@ static int ocfs2_data_convert_worker(str
 		filemap_fdatawait(mapping);
 	}
 
+out_forget:
 	forget_all_cached_acls(inode);
 
 out:

[PATCH 4.9 02/57] usb: gadget: r8a66597: fix a loop in set_feature()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 17956b53ebff6a490baf580a836cbd3eae94892b upstream.

This loop is supposed to loop until if reads something other than
CS_IDST or until it times out after 30,000 attempts.  But because of
the || vs && bug, it will never time out and instead it will loop a
minimum of 30,000 times.

This bug is quite old but the code is only used in USB_DEVICE_TEST_MODE
so it probably doesn't affect regular usage.

Fixes: 96fe53ef5498 ("usb: gadget: r8a66597-udc: add support for TEST_MODE")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210906094221.GA10957@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/udc/r8a66597-udc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/gadget/udc/r8a66597-udc.c
+++ b/drivers/usb/gadget/udc/r8a66597-udc.c
@@ -1253,7 +1253,7 @@ static void set_feature(struct r8a66597
 			do {
 				tmp = r8a66597_read(r8a66597, INTSTS0) & CTSQ;
 				udelay(1);
-			} while (tmp != CS_IDST || timeout-- > 0);
+			} while (tmp != CS_IDST && timeout-- > 0);
 
 			if (tmp == CS_IDST)
 				r8a66597_bset(r8a66597,

[PATCH 4.9 03/57] usb: musb: tusb6010: uninitialized data in tusb_fifo_write_unaligned()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 517c7bf99bad3d6b9360558414aae634b7472d80 upstream.

This is writing to the first 1 - 3 bytes of "val" and then writing all
four bytes to musb_writel().  The last byte is always going to be
garbage.  Zero out the last bytes instead.

Fixes: 550a7375fe72 ("USB: Add MUSB and TUSB support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210916135737.GI25094@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/musb/tusb6010.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -193,6 +193,7 @@ tusb_fifo_write_unaligned(void __iomem *
 	}
 	if (len > 0) {
 		/* Write the rest 1 - 3 bytes to FIFO */
+		val = 0;
 		memcpy(&val, buf, len);
 		musb_writel(fifo, 0, val);
 	}

[PATCH 4.9 04/57] cifs: fix incorrect check for null pointer in header_assemble

[Greg Kroah-Hartman]

From: Steve French <stfrench@microsoft.com>

commit 9ed38fd4a15417cac83967360cf20b853bfab9b6 upstream.

Although very unlikely that the tlink pointer would be null in this case,
get_next_mid function can in theory return null (but not an error)
so need to check for null (not for IS_ERR, which can not be returned
here).

Address warning:

        fs/smbfs_client/connect.c:2392 cifs_match_super()
        warn: 'tlink' isn't an ERR_PTR

Pointed out by Dan Carpenter via smatch code analysis tool

CC: stable@vger.kernel.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/cifs/connect.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -2960,9 +2960,10 @@ cifs_match_super(struct super_block *sb,
 	spin_lock(&cifs_tcp_ses_lock);
 	cifs_sb = CIFS_SB(sb);
 	tlink = cifs_get_tlink(cifs_sb_master_tlink(cifs_sb));
-	if (IS_ERR(tlink)) {
+	if (tlink == NULL) {
+		/* can not match superblock if tlink were ever null */
 		spin_unlock(&cifs_tcp_ses_lock);
-		return rc;
+		return 0;
 	}
 	tcon = tlink_tcon(tlink);
 	ses = tcon->ses;

[PATCH 4.9 05/57] xen/x86: fix PV trap handling on secondary processors

[Greg Kroah-Hartman]

From: Jan Beulich <jbeulich@suse.com>

commit 0594c58161b6e0f3da8efa9c6e3d4ba52b652717 upstream.

The initial observation was that in PV mode under Xen 32-bit user space
didn't work anymore. Attempts of system calls ended in #GP(0x402). All
of the sudden the vector 0x80 handler was not in place anymore. As it
turns out up to 5.13 redundant initialization did occur: Once from
cpu_initialize_context() (through its VCPUOP_initialise hypercall) and a
2nd time while each CPU was brought fully up. This 2nd initialization is
now gone, uncovering that the 1st one was flawed: Unlike for the
set_trap_table hypercall, a full virtual IDT needs to be specified here;
the "vector" fields of the individual entries are of no interest. With
many (kernel) IDT entries still(?) (i.e. at that point at least) empty,
the syscall vector 0x80 ended up in slot 0x20 of the virtual IDT, thus
becoming the domain's handler for vector 0x20.

Make xen_convert_trap_info() fit for either purpose, leveraging the fact
that on the xen_copy_trap_info() path the table starts out zero-filled.
This includes moving out the writing of the sentinel, which would also
have lead to a buffer overrun in the xen_copy_trap_info() case if all
(kernel) IDT entries were populated. Convert the writing of the sentinel
to clearing of the entire table entry rather than just the address
field.

(I didn't bother trying to identify the commit which uncovered the issue
in 5.14; the commit named below is the one which actually introduced the
bad code.)

Fixes: f87e4cac4f4e ("xen: SMP guest support")
Cc: stable@vger.kernel.org
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/7a266932-092e-b68f-f2bb-1473b61adc6e@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/xen/enlighten.c |   15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -872,8 +872,8 @@ static void xen_write_idt_entry(gate_des
 	preempt_enable();
 }
 
-static void xen_convert_trap_info(const struct desc_ptr *desc,
-				  struct trap_info *traps)
+static unsigned xen_convert_trap_info(const struct desc_ptr *desc,
+				      struct trap_info *traps, bool full)
 {
 	unsigned in, out, count;
 
@@ -883,17 +883,18 @@ static void xen_convert_trap_info(const
 	for (in = out = 0; in < count; in++) {
 		gate_desc *entry = (gate_desc*)(desc->address) + in;
 
-		if (cvt_gate_to_trap(in, entry, &traps[out]))
+		if (cvt_gate_to_trap(in, entry, &traps[out]) || full)
 			out++;
 	}
-	traps[out].address = 0;
+
+	return out;
 }
 
 void xen_copy_trap_info(struct trap_info *traps)
 {
 	const struct desc_ptr *desc = this_cpu_ptr(&idt_desc);
 
-	xen_convert_trap_info(desc, traps);
+	xen_convert_trap_info(desc, traps, true);
 }
 
 /* Load a new IDT into Xen.  In principle this can be per-CPU, so we
@@ -903,6 +904,7 @@ static void xen_load_idt(const struct de
 {
 	static DEFINE_SPINLOCK(lock);
 	static struct trap_info traps[257];
+	unsigned out;
 
 	trace_xen_cpu_load_idt(desc);
 
@@ -910,7 +912,8 @@ static void xen_load_idt(const struct de
 
 	memcpy(this_cpu_ptr(&idt_desc), desc, sizeof(idt_desc));
 
-	xen_convert_trap_info(desc, traps);
+	out = xen_convert_trap_info(desc, traps, false);
+	memset(&traps[out], 0, sizeof(traps[0]));
 
 	xen_mc_flush();
 	if (HYPERVISOR_set_trap_table(traps))

[PATCH 4.9 06/57] usb-storage: Add quirk for ScanLogic SL11R-IDE older than 2.6c

[Greg Kroah-Hartman]

From: Ondrej Zary <linux@zary.sk>

commit b55d37ef6b7db3eda9b4495a8d9b0a944ee8c67d upstream.

ScanLogic SL11R-IDE with firmware older than 2.6c (the latest one) has
broken tag handling, preventing the device from working at all:
usb 1-1: new full-speed USB device number 2 using uhci_hcd
usb 1-1: New USB device found, idVendor=04ce, idProduct=0002, bcdDevice= 2.60
usb 1-1: New USB device strings: Mfr=1, Product=1, SerialNumber=0
usb 1-1: Product: USB Device
usb 1-1: Manufacturer: USB Device
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi host2: usb-storage 1-1:1.0
usbcore: registered new interface driver usb-storage
usb 1-1: reset full-speed USB device number 2 using uhci_hcd
usb 1-1: reset full-speed USB device number 2 using uhci_hcd
usb 1-1: reset full-speed USB device number 2 using uhci_hcd
usb 1-1: reset full-speed USB device number 2 using uhci_hcd

Add US_FL_BULK_IGNORE_TAG to fix it. Also update my e-mail address.

2.6c is the only firmware that claims Linux compatibility.
The firmware can be upgraded using ezotgdbg utility:
https://github.com/asciilifeform/ezotgdbg

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ondrej Zary <linux@zary.sk>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210913210106.12717-1-linux@zary.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/storage/unusual_devs.h |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -435,9 +435,16 @@ UNUSUAL_DEV(  0x04cb, 0x0100, 0x0000, 0x
 		USB_SC_UFI, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN),
 
 /*
- * Reported by Ondrej Zary <linux@rainbow-software.org>
+ * Reported by Ondrej Zary <linux@zary.sk>
  * The device reports one sector more and breaks when that sector is accessed
+ * Firmwares older than 2.6c (the latest one and the only that claims Linux
+ * support) have also broken tag handling
  */
+UNUSUAL_DEV(  0x04ce, 0x0002, 0x0000, 0x026b,
+		"ScanLogic",
+		"SL11R-IDE",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY | US_FL_BULK_IGNORE_TAG),
 UNUSUAL_DEV(  0x04ce, 0x0002, 0x026c, 0x026c,
 		"ScanLogic",
 		"SL11R-IDE",

[PATCH 4.9 07/57] USB: serial: cp210x: add ID for GW Instek GDM-834x Digital Multimeter

[Greg Kroah-Hartman]

From: Uwe Brandt <uwe.brandt@gmail.com>

commit 3bd18ba7d859eb1fbef3beb1e80c24f6f7d7596c upstream.

Add the USB serial device ID for the GW Instek GDM-834x Digital Multimeter.

Signed-off-by: Uwe Brandt <uwe.brandt@gmail.com>
Link: https://lore.kernel.org/r/YUxFl3YUCPGJZd8Y@hovoldconsulting.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/cp210x.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -231,6 +231,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x1FB9, 0x0602) }, /* Lake Shore Model 648 Magnet Power Supply */
 	{ USB_DEVICE(0x1FB9, 0x0700) }, /* Lake Shore Model 737 VSM Controller */
 	{ USB_DEVICE(0x1FB9, 0x0701) }, /* Lake Shore Model 776 Hall Matrix */
+	{ USB_DEVICE(0x2184, 0x0030) }, /* GW Instek GDM-834x Digital Multimeter */
 	{ USB_DEVICE(0x2626, 0xEA60) }, /* Aruba Networks 7xxx USB Serial Console */
 	{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
 	{ USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */

[PATCH 4.9 08/57] staging: greybus: uart: fix tty use after free

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 92dc0b1f46e12cfabd28d709bb34f7a39431b44f upstream.

User space can hold a tty open indefinitely and tty drivers must not
release the underlying structures until the last user is gone.

Switch to using the tty-port reference counter to manage the life time
of the greybus tty state to avoid use after free after a disconnect.

Fixes: a18e15175708 ("greybus: more uart work")
Cc: stable@vger.kernel.org      # 4.9
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210906124538.22358-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/greybus/uart.c |   62 +++++++++++++++++++++--------------------
 1 file changed, 32 insertions(+), 30 deletions(-)

--- a/drivers/staging/greybus/uart.c
+++ b/drivers/staging/greybus/uart.c
@@ -812,6 +812,17 @@ out:
 	gbphy_runtime_put_autosuspend(gb_tty->gbphy_dev);
 }
 
+static void gb_tty_port_destruct(struct tty_port *port)
+{
+	struct gb_tty *gb_tty = container_of(port, struct gb_tty, port);
+
+	if (gb_tty->minor != GB_NUM_MINORS)
+		release_minor(gb_tty);
+	kfifo_free(&gb_tty->write_fifo);
+	kfree(gb_tty->buffer);
+	kfree(gb_tty);
+}
+
 static const struct tty_operations gb_ops = {
 	.install =		gb_tty_install,
 	.open =			gb_tty_open,
@@ -834,6 +845,7 @@ static struct tty_port_operations gb_por
 	.dtr_rts =		gb_tty_dtr_rts,
 	.activate =		gb_tty_port_activate,
 	.shutdown =		gb_tty_port_shutdown,
+	.destruct =		gb_tty_port_destruct,
 };
 
 static int gb_uart_probe(struct gbphy_device *gbphy_dev,
@@ -846,17 +858,11 @@ static int gb_uart_probe(struct gbphy_de
 	int retval;
 	int minor;
 
-	gb_tty = kzalloc(sizeof(*gb_tty), GFP_KERNEL);
-	if (!gb_tty)
-		return -ENOMEM;
-
 	connection = gb_connection_create(gbphy_dev->bundle,
 					  le16_to_cpu(gbphy_dev->cport_desc->id),
 					  gb_uart_request_handler);
-	if (IS_ERR(connection)) {
-		retval = PTR_ERR(connection);
-		goto exit_tty_free;
-	}
+	if (IS_ERR(connection))
+		return PTR_ERR(connection);
 
 	max_payload = gb_operation_get_payload_size_max(connection);
 	if (max_payload < sizeof(struct gb_uart_send_data_request)) {
@@ -864,13 +870,23 @@ static int gb_uart_probe(struct gbphy_de
 		goto exit_connection_destroy;
 	}
 
+	gb_tty = kzalloc(sizeof(*gb_tty), GFP_KERNEL);
+	if (!gb_tty) {
+		retval = -ENOMEM;
+		goto exit_connection_destroy;
+	}
+
+	tty_port_init(&gb_tty->port);
+	gb_tty->port.ops = &gb_port_ops;
+	gb_tty->minor = GB_NUM_MINORS;
+
 	gb_tty->buffer_payload_max = max_payload -
 			sizeof(struct gb_uart_send_data_request);
 
 	gb_tty->buffer = kzalloc(gb_tty->buffer_payload_max, GFP_KERNEL);
 	if (!gb_tty->buffer) {
 		retval = -ENOMEM;
-		goto exit_connection_destroy;
+		goto exit_put_port;
 	}
 
 	INIT_WORK(&gb_tty->tx_work, gb_uart_tx_write_work);
@@ -878,7 +894,7 @@ static int gb_uart_probe(struct gbphy_de
 	retval = kfifo_alloc(&gb_tty->write_fifo, GB_UART_WRITE_FIFO_SIZE,
 			     GFP_KERNEL);
 	if (retval)
-		goto exit_buf_free;
+		goto exit_put_port;
 
 	gb_tty->credits = GB_UART_FIRMWARE_CREDITS;
 	init_completion(&gb_tty->credits_complete);
@@ -892,7 +908,7 @@ static int gb_uart_probe(struct gbphy_de
 		} else {
 			retval = minor;
 		}
-		goto exit_kfifo_free;
+		goto exit_put_port;
 	}
 
 	gb_tty->minor = minor;
@@ -901,9 +917,6 @@ static int gb_uart_probe(struct gbphy_de
 	init_waitqueue_head(&gb_tty->wioctl);
 	mutex_init(&gb_tty->mutex);
 
-	tty_port_init(&gb_tty->port);
-	gb_tty->port.ops = &gb_port_ops;
-
 	gb_tty->connection = connection;
 	gb_tty->gbphy_dev = gbphy_dev;
 	gb_connection_set_data(connection, gb_tty);
@@ -911,7 +924,7 @@ static int gb_uart_probe(struct gbphy_de
 
 	retval = gb_connection_enable_tx(connection);
 	if (retval)
-		goto exit_release_minor;
+		goto exit_put_port;
 
 	send_control(gb_tty, gb_tty->ctrlout);
 
@@ -938,16 +951,10 @@ static int gb_uart_probe(struct gbphy_de
 
 exit_connection_disable:
 	gb_connection_disable(connection);
-exit_release_minor:
-	release_minor(gb_tty);
-exit_kfifo_free:
-	kfifo_free(&gb_tty->write_fifo);
-exit_buf_free:
-	kfree(gb_tty->buffer);
+exit_put_port:
+	tty_port_put(&gb_tty->port);
 exit_connection_destroy:
 	gb_connection_destroy(connection);
-exit_tty_free:
-	kfree(gb_tty);
 
 	return retval;
 }
@@ -978,15 +985,10 @@ static void gb_uart_remove(struct gbphy_
 	gb_connection_disable_rx(connection);
 	tty_unregister_device(gb_tty_driver, gb_tty->minor);
 
-	/* FIXME - free transmit / receive buffers */
-
 	gb_connection_disable(connection);
-	tty_port_destroy(&gb_tty->port);
 	gb_connection_destroy(connection);
-	release_minor(gb_tty);
-	kfifo_free(&gb_tty->write_fifo);
-	kfree(gb_tty->buffer);
-	kfree(gb_tty);
+
+	tty_port_put(&gb_tty->port);
 }
 
 static int gb_tty_init(void)

[PATCH 4.9 09/57] USB: serial: mos7840: remove duplicated 0xac24 device ID

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

commit 211f323768a25b30c106fd38f15a0f62c7c2b5f4 upstream.

0xac24 device ID is already defined and used via
BANDB_DEVICE_ID_USO9ML2_4.  Remove the duplicate from the list.

Fixes: 27f1281d5f72 ("USB: serial: Extra device/vendor ID for mos7840 driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/mos7840.c |    2 --
 1 file changed, 2 deletions(-)

--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -126,7 +126,6 @@
 #define BANDB_DEVICE_ID_USOPTL4_2P       0xBC02
 #define BANDB_DEVICE_ID_USOPTL4_4        0xAC44
 #define BANDB_DEVICE_ID_USOPTL4_4P       0xBC03
-#define BANDB_DEVICE_ID_USOPTL2_4        0xAC24
 
 /* This driver also supports
  * ATEN UC2324 device using Moschip MCS7840
@@ -207,7 +206,6 @@ static const struct usb_device_id id_tab
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2P)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4P)},
-	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
 	{USB_DEVICE(USB_VENDOR_ID_MOXA, MOXA_DEVICE_ID_2210)},

[PATCH 4.9 10/57] USB: serial: option: add Telit LN920 compositions

[Greg Kroah-Hartman]

From: Carlo Lobrano <c.lobrano@gmail.com>

commit 7bb057134d609b9c038a00b6876cf0d37d0118ce upstream.

This patch adds the following Telit LN920 compositions:

0x1060: tty, adb, rmnet, tty, tty, tty, tty
0x1061: tty, adb, mbim, tty, tty, tty, tty
0x1062: rndis, tty, adb, tty, tty, tty, tty
0x1063: tty, adb, ecm, tty, tty, tty, tty

Signed-off-by: Carlo Lobrano <c.lobrano@gmail.com>
Link: https://lore.kernel.org/r/20210903123913.1086513-1-c.lobrano@gmail.com
Reviewed-by: Daniele Palmas <dnlplm@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1187,6 +1187,14 @@ static const struct usb_device_id option
 	  .driver_info = NCTRL(0) | RSVD(1) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1056, 0xff),	/* Telit FD980 */
 	  .driver_info = NCTRL(2) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1060, 0xff),	/* Telit LN920 (rmnet) */
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1061, 0xff),	/* Telit LN920 (MBIM) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1062, 0xff),	/* Telit LN920 (RNDIS) */
+	  .driver_info = NCTRL(2) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1063, 0xff),	/* Telit LN920 (ECM) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),

[PATCH 4.9 11/57] USB: serial: option: remove duplicate USB device ID

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

commit 1ca200a8c6f079950a04ea3c3380fe8cf78e95a2 upstream.

The device ZTE 0x0094 is already on the list.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Fixes: b9e44fe5ecda ("USB: option: cleanup zte 3g-dongle's pid in option.c")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1640,7 +1640,6 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0060, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff),
 	  .driver_info = RSVD(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff),

[PATCH 4.9 12/57] USB: serial: option: add device id for Foxconn T99W265

[Greg Kroah-Hartman]

From: Slark Xiao <slark_xiao@163.com>

commit 9e3eed534f8235a4a596a9dae5b8a6425d81ea1a upstream.

Adding support for Foxconn device T99W265 for enumeration with
PID 0xe0db.

usb-devices output for 0xe0db
T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 19 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=0489 ProdID=e0db Rev=05.04
S:  Manufacturer=Microsoft
S:  Product=Generic Mobile Broadband Adapter
S:  SerialNumber=6c50f452
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

if0/1: MBIM, if2:Diag, if3:GNSS, if4: Modem

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20210917110106.9852-1-slark_xiao@163.com
[ johan: use USB_DEVICE_INTERFACE_CLASS(), amend comment ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2059,6 +2059,8 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
 	{ USB_DEVICE(0x0489, 0xe0b5),						/* Foxconn T77W968 ESIM */
 	  .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0db, 0xff),			/* Foxconn T99W265 MBIM */
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE(0x1508, 0x1001),						/* Fibocom NL668 (IOT version) */
 	  .driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
 	{ USB_DEVICE(0x2cb7, 0x0104),						/* Fibocom NL678 series */

[PATCH 4.9 13/57] mcb: fix error handling in mcb_alloc_bus()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 25a1433216489de4abc889910f744e952cb6dbae upstream.

There are two bugs:
1) If ida_simple_get() fails then this code calls put_device(carrier)
   but we haven't yet called get_device(carrier) and probably that
   leads to a use after free.
2) After device_initialize() then we need to use put_device() to
   release the bus.  This will free the internal resources tied to the
   device and call mcb_free_bus() which will free the rest.

Fixes: 5d9e2ab9fea4 ("mcb: Implement bus->dev.release callback")
Fixes: 18d288198099 ("mcb: Correctly initialize the bus's device")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/32e160cf6864ce77f9d62948338e24db9fd8ead9.1630931319.git.johannes.thumshirn@wdc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mcb/mcb-core.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/drivers/mcb/mcb-core.c
+++ b/drivers/mcb/mcb-core.c
@@ -280,8 +280,8 @@ struct mcb_bus *mcb_alloc_bus(struct dev
 
 	bus_nr = ida_simple_get(&mcb_ida, 0, 0, GFP_KERNEL);
 	if (bus_nr < 0) {
-		rc = bus_nr;
-		goto err_free;
+		kfree(bus);
+		return ERR_PTR(bus_nr);
 	}
 
 	bus->bus_nr = bus_nr;
@@ -296,12 +296,12 @@ struct mcb_bus *mcb_alloc_bus(struct dev
 	dev_set_name(&bus->dev, "mcb:%d", bus_nr);
 	rc = device_add(&bus->dev);
 	if (rc)
-		goto err_free;
+		goto err_put;
 
 	return bus;
-err_free:
-	put_device(carrier);
-	kfree(bus);
+
+err_put:
+	put_device(&bus->dev);
 	return ERR_PTR(rc);
 }
 EXPORT_SYMBOL_GPL(mcb_alloc_bus);

[PATCH 4.9 14/57] serial: mvebu-uart: fix drivers tx_empty callback

[Greg Kroah-Hartman]

From: Pali Rohár <pali@kernel.org>

commit 74e1eb3b4a1ef2e564b4bdeb6e92afe844e900de upstream.

Driver's tx_empty callback should signal when the transmit shift register
is empty. So when the last character has been sent.

STAT_TX_FIFO_EMP bit signals only that HW transmit FIFO is empty, which
happens when the last byte is loaded into transmit shift register.

STAT_TX_EMP bit signals when the both HW transmit FIFO and transmit shift
register are empty.

So replace STAT_TX_FIFO_EMP check by STAT_TX_EMP in mvebu_uart_tx_empty()
callback function.

Fixes: 30530791a7a0 ("serial: mvebu-uart: initial support for Armada-3700 serial port")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20210911132017.25505-1-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/mvebu-uart.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/mvebu-uart.c
+++ b/drivers/tty/serial/mvebu-uart.c
@@ -108,7 +108,7 @@ static unsigned int mvebu_uart_tx_empty(
 	st = readl(port->membase + UART_STAT);
 	spin_unlock_irqrestore(&port->lock, flags);
 
-	return (st & STAT_TX_FIFO_EMP) ? TIOCSER_TEMT : 0;
+	return (st & STAT_TX_EMP) ? TIOCSER_TEMT : 0;
 }
 
 static unsigned int mvebu_uart_get_mctrl(struct uart_port *port)

[PATCH 4.9 15/57] net: hso: fix muxed tty registration

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit e8f69b16ee776da88589b5271e3f46020efc8f6c upstream.

If resource allocation and registration fail for a muxed tty device
(e.g. if there are no more minor numbers) the driver should not try to
deregister the never-registered (or already-deregistered) tty.

Fix up the error handling to avoid dereferencing a NULL pointer when
attempting to remove the character device.

Fixes: 72dc1c096c70 ("HSO: add option hso driver")
Cc: stable@vger.kernel.org	# 2.6.27
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/hso.c |   12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -2715,14 +2715,14 @@ struct hso_device *hso_create_mux_serial
 
 	serial = kzalloc(sizeof(*serial), GFP_KERNEL);
 	if (!serial)
-		goto exit;
+		goto err_free_dev;
 
 	hso_dev->port_data.dev_serial = serial;
 	serial->parent = hso_dev;
 
 	if (hso_serial_common_create
 	    (serial, 1, CTRL_URB_RX_SIZE, CTRL_URB_TX_SIZE))
-		goto exit;
+		goto err_free_serial;
 
 	serial->tx_data_length--;
 	serial->write_data = hso_mux_serial_write_data;
@@ -2738,11 +2738,9 @@ struct hso_device *hso_create_mux_serial
 	/* done, return it */
 	return hso_dev;
 
-exit:
-	if (serial) {
-		tty_unregister_device(tty_drv, serial->minor);
-		kfree(serial);
-	}
+err_free_serial:
+	kfree(serial);
+err_free_dev:
 	kfree(hso_dev);
 	return NULL;
 

[PATCH 4.9 16/57] net/mlx4_en: Dont allow aRFS for encapsulated packets

[Greg Kroah-Hartman]

From: Aya Levin <ayal@nvidia.com>

[ Upstream commit fdbccea419dc782079ce5881d2705cc9e3881480 ]

Driver doesn't support aRFS for encapsulated packets, return early error
in such a case.

Fixes: 1eb8c695bda9 ("net/mlx4_en: Add accelerated RFS support")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index 437e30a5a314..cb3e6db20088 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -309,6 +309,9 @@ mlx4_en_filter_rfs(struct net_device *net_dev, const struct sk_buff *skb,
 	int nhoff = skb_network_offset(skb);
 	int ret = 0;
 
+	if (skb->encapsulation)
+		return -EPROTONOSUPPORT;
+
 	if (skb->protocol != htons(ETH_P_IP))
 		return -EPROTONOSUPPORT;
 
-- 
2.33.0

[PATCH 4.9 17/57] scsi: iscsi: Adjust iface sysfs attr detection

[Greg Kroah-Hartman]

From: Baokun Li <libaokun1@huawei.com>

[ Upstream commit 4e28550829258f7dab97383acaa477bd724c0ff4 ]

ISCSI_NET_PARAM_IFACE_ENABLE belongs to enum iscsi_net_param instead of
iscsi_iface_param so move it to ISCSI_NET_PARAM. Otherwise, when we call
into the driver, we might not match and return that we don't want attr
visible in sysfs. Found in code review.

Link: https://lore.kernel.org/r/20210901085336.2264295-1-libaokun1@huawei.com
Fixes: e746f3451ec7 ("scsi: iscsi: Fix iface sysfs attr detection")
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi_transport_iscsi.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 8d10b35caed5..aed17f958448 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -429,9 +429,7 @@ static umode_t iscsi_iface_attr_is_visible(struct kobject *kobj,
 	struct iscsi_transport *t = iface->transport;
 	int param = -1;
 
-	if (attr == &dev_attr_iface_enabled.attr)
-		param = ISCSI_NET_PARAM_IFACE_ENABLE;
-	else if (attr == &dev_attr_iface_def_taskmgmt_tmo.attr)
+	if (attr == &dev_attr_iface_def_taskmgmt_tmo.attr)
 		param = ISCSI_IFACE_PARAM_DEF_TASKMGMT_TMO;
 	else if (attr == &dev_attr_iface_header_digest.attr)
 		param = ISCSI_IFACE_PARAM_HDRDGST_EN;
@@ -471,7 +469,9 @@ static umode_t iscsi_iface_attr_is_visible(struct kobject *kobj,
 	if (param != -1)
 		return t->attr_is_visible(ISCSI_IFACE_PARAM, param);
 
-	if (attr == &dev_attr_iface_vlan_id.attr)
+	if (attr == &dev_attr_iface_enabled.attr)
+		param = ISCSI_NET_PARAM_IFACE_ENABLE;
+	else if (attr == &dev_attr_iface_vlan_id.attr)
 		param = ISCSI_NET_PARAM_VLAN_ID;
 	else if (attr == &dev_attr_iface_vlan_priority.attr)
 		param = ISCSI_NET_PARAM_VLAN_PRIORITY;
-- 
2.33.0

[PATCH 4.9 18/57] blktrace: Fix uaf in blk_trace access after removing by sysfs

[Greg Kroah-Hartman]

From: Zhihao Cheng <chengzhihao1@huawei.com>

[ Upstream commit 5afedf670caf30a2b5a52da96eb7eac7dee6a9c9 ]

There is an use-after-free problem triggered by following process:

      P1(sda)				P2(sdb)
			echo 0 > /sys/block/sdb/trace/enable
			  blk_trace_remove_queue
			    synchronize_rcu
			    blk_trace_free
			      relay_close
rcu_read_lock
__blk_add_trace
  trace_note_tsk
  (Iterate running_trace_list)
			        relay_close_buf
				  relay_destroy_buf
				    kfree(buf)
    trace_note(sdb's bt)
      relay_reserve
        buf->offset <- nullptr deference (use-after-free) !!!
rcu_read_unlock

[  502.714379] BUG: kernel NULL pointer dereference, address:
0000000000000010
[  502.715260] #PF: supervisor read access in kernel mode
[  502.715903] #PF: error_code(0x0000) - not-present page
[  502.716546] PGD 103984067 P4D 103984067 PUD 17592b067 PMD 0
[  502.717252] Oops: 0000 [#1] SMP
[  502.720308] RIP: 0010:trace_note.isra.0+0x86/0x360
[  502.732872] Call Trace:
[  502.733193]  __blk_add_trace.cold+0x137/0x1a3
[  502.733734]  blk_add_trace_rq+0x7b/0xd0
[  502.734207]  blk_add_trace_rq_issue+0x54/0xa0
[  502.734755]  blk_mq_start_request+0xde/0x1b0
[  502.735287]  scsi_queue_rq+0x528/0x1140
...
[  502.742704]  sg_new_write.isra.0+0x16e/0x3e0
[  502.747501]  sg_ioctl+0x466/0x1100

Reproduce method:
  ioctl(/dev/sda, BLKTRACESETUP, blk_user_trace_setup[buf_size=127])
  ioctl(/dev/sda, BLKTRACESTART)
  ioctl(/dev/sdb, BLKTRACESETUP, blk_user_trace_setup[buf_size=127])
  ioctl(/dev/sdb, BLKTRACESTART)

  echo 0 > /sys/block/sdb/trace/enable &
  // Add delay(mdelay/msleep) before kernel enters blk_trace_free()

  ioctl$SG_IO(/dev/sda, SG_IO, ...)
  // Enters trace_note_tsk() after blk_trace_free() returned
  // Use mdelay in rcu region rather than msleep(which may schedule out)

Remove blk_trace from running_list before calling blk_trace_free() by
sysfs if blk_trace is at Blktrace_running state.

Fixes: c71a896154119f ("blktrace: add ftrace plugin")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Link: https://lore.kernel.org/r/20210923134921.109194-1-chengzhihao1@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/blktrace.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index 88eb9261c7b5..056107787f4a 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -1584,6 +1584,14 @@ static int blk_trace_remove_queue(struct request_queue *q)
 	if (bt == NULL)
 		return -EINVAL;
 
+	if (bt->trace_state == Blktrace_running) {
+		bt->trace_state = Blktrace_stopped;
+		spin_lock_irq(&running_trace_lock);
+		list_del_init(&bt->running_list);
+		spin_unlock_irq(&running_trace_lock);
+		relay_flush(bt->rchan);
+	}
+
 	put_probe_ref();
 	synchronize_rcu();
 	blk_trace_free(bt);
-- 
2.33.0

[PATCH 4.9 19/57] net: stmmac: allow CSR clock of 300MHz

[Greg Kroah-Hartman]

From: Jesper Nilsson <jesper.nilsson@axis.com>

[ Upstream commit 08dad2f4d541fcfe5e7bfda72cc6314bbfd2802f ]

The Synopsys Ethernet IP uses the CSR clock as a base clock for MDC.
The divisor used is set in the MAC_MDIO_Address register field CR
(Clock Rate)

The divisor is there to change the CSR clock into a clock that falls
below the IEEE 802.3 specified max frequency of 2.5MHz.

If the CSR clock is 300MHz, the code falls back to using the reset
value in the MAC_MDIO_Address register, as described in the comment
above this code.

However, 300MHz is actually an allowed value and the proper divider
can be estimated quite easily (it's just 1Hz difference!)

A CSR frequency of 300MHz with the maximum clock rate value of 0x5
(STMMAC_CSR_250_300M, a divisor of 124) gives somewhere around
~2.42MHz which is below the IEEE 802.3 specified maximum.

For the ARTPEC-8 SoC, the CSR clock is this problematic 300MHz,
and unfortunately, the reset-value of the MAC_MDIO_Address CR field
is 0x0.

This leads to a clock rate of zero and a divisor of 42, and gives an
MDC frequency of ~7.14MHz.

Allow CSR clock of 300MHz by making the comparison inclusive.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index dbd56fefa2f3..0a7ff854d1c3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -178,7 +178,7 @@ static void stmmac_clk_csr_set(struct stmmac_priv *priv)
 			priv->clk_csr = STMMAC_CSR_100_150M;
 		else if ((clk_rate >= CSR_F_150M) && (clk_rate < CSR_F_250M))
 			priv->clk_csr = STMMAC_CSR_150_250M;
-		else if ((clk_rate >= CSR_F_250M) && (clk_rate < CSR_F_300M))
+		else if ((clk_rate >= CSR_F_250M) && (clk_rate <= CSR_F_300M))
 			priv->clk_csr = STMMAC_CSR_250_300M;
 	}
 }
-- 
2.33.0

[PATCH 4.9 20/57] m68k: Double cast io functions to unsigned long

[Greg Kroah-Hartman]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit b1a89856fbf63fffde6a4771d8f1ac21df549e50 ]

m68k builds fail widely with errors such as

arch/m68k/include/asm/raw_io.h:20:19: error:
	cast to pointer from integer of different size
arch/m68k/include/asm/raw_io.h:30:32: error:
	cast to pointer from integer of different size [-Werror=int-to-p

On m68k, io functions are defined as macros. The problem is seen if the
macro parameter variable size differs from the size of a pointer. Cast
the parameter of all io macros to unsigned long before casting it to
a pointer to fix the problem.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210907060729.2391992-1-linux@roeck-us.net
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/m68k/include/asm/raw_io.h | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/m68k/include/asm/raw_io.h b/arch/m68k/include/asm/raw_io.h
index 932faa35655b..2238232c360e 100644
--- a/arch/m68k/include/asm/raw_io.h
+++ b/arch/m68k/include/asm/raw_io.h
@@ -30,21 +30,21 @@ extern void __iounmap(void *addr, unsigned long size);
  * two accesses to memory, which may be undesirable for some devices.
  */
 #define in_8(addr) \
-    ({ u8 __v = (*(__force volatile u8 *) (addr)); __v; })
+    ({ u8 __v = (*(__force volatile u8 *) (unsigned long)(addr)); __v; })
 #define in_be16(addr) \
-    ({ u16 __v = (*(__force volatile u16 *) (addr)); __v; })
+    ({ u16 __v = (*(__force volatile u16 *) (unsigned long)(addr)); __v; })
 #define in_be32(addr) \
-    ({ u32 __v = (*(__force volatile u32 *) (addr)); __v; })
+    ({ u32 __v = (*(__force volatile u32 *) (unsigned long)(addr)); __v; })
 #define in_le16(addr) \
-    ({ u16 __v = le16_to_cpu(*(__force volatile __le16 *) (addr)); __v; })
+    ({ u16 __v = le16_to_cpu(*(__force volatile __le16 *) (unsigned long)(addr)); __v; })
 #define in_le32(addr) \
-    ({ u32 __v = le32_to_cpu(*(__force volatile __le32 *) (addr)); __v; })
+    ({ u32 __v = le32_to_cpu(*(__force volatile __le32 *) (unsigned long)(addr)); __v; })
 
-#define out_8(addr,b) (void)((*(__force volatile u8 *) (addr)) = (b))
-#define out_be16(addr,w) (void)((*(__force volatile u16 *) (addr)) = (w))
-#define out_be32(addr,l) (void)((*(__force volatile u32 *) (addr)) = (l))
-#define out_le16(addr,w) (void)((*(__force volatile __le16 *) (addr)) = cpu_to_le16(w))
-#define out_le32(addr,l) (void)((*(__force volatile __le32 *) (addr)) = cpu_to_le32(l))
+#define out_8(addr,b) (void)((*(__force volatile u8 *) (unsigned long)(addr)) = (b))
+#define out_be16(addr,w) (void)((*(__force volatile u16 *) (unsigned long)(addr)) = (w))
+#define out_be32(addr,l) (void)((*(__force volatile u32 *) (unsigned long)(addr)) = (l))
+#define out_le16(addr,w) (void)((*(__force volatile __le16 *) (unsigned long)(addr)) = cpu_to_le16(w))
+#define out_le32(addr,l) (void)((*(__force volatile __le32 *) (unsigned long)(addr)) = cpu_to_le32(l))
 
 #define raw_inb in_8
 #define raw_inw in_be16
-- 
2.33.0

[PATCH 4.9 21/57] compiler.h: Introduce absolute_pointer macro

[Greg Kroah-Hartman]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit f6b5f1a56987de837f8e25cd560847106b8632a8 ]

absolute_pointer() disassociates a pointer from its originating symbol
type and context. Use it to prevent compiler warnings/errors such as

  drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe':
  arch/m68k/include/asm/string.h:72:25: error:
	'__builtin_memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread]

Such warnings may be reported by gcc 11.x for string and memory
operations on fixed addresses.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/compiler.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/compiler.h b/include/linux/compiler.h
index 824b1b97f989..10937279b152 100644
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -233,6 +233,8 @@ void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect);
     (typeof(ptr)) (__ptr + (off)); })
 #endif
 
+#define absolute_pointer(val)	RELOC_HIDE((void *)(val), 0)
+
 #ifndef OPTIMIZER_HIDE_VAR
 #define OPTIMIZER_HIDE_VAR(var) barrier()
 #endif
-- 
2.33.0

[PATCH 4.9 22/57] net: i825xx: Use absolute_pointer for memcpy from fixed memory location

[Greg Kroah-Hartman]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit dff2d13114f0beec448da9b3716204eb34b0cf41 ]

gcc 11.x reports the following compiler warning/error.

  drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe':
  arch/m68k/include/asm/string.h:72:25: error:
	'__builtin_memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread]

Use absolute_pointer() to work around the problem.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/i825xx/82596.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/i825xx/82596.c b/drivers/net/ethernet/i825xx/82596.c
index ce235b776793..299628931bdb 100644
--- a/drivers/net/ethernet/i825xx/82596.c
+++ b/drivers/net/ethernet/i825xx/82596.c
@@ -1155,7 +1155,7 @@ struct net_device * __init i82596_probe(int unit)
 			err = -ENODEV;
 			goto out;
 		}
-		memcpy(eth_addr, (void *) 0xfffc1f2c, ETH_ALEN);	/* YUCK! Get addr from NOVRAM */
+		memcpy(eth_addr, absolute_pointer(0xfffc1f2c), ETH_ALEN); /* YUCK! Get addr from NOVRAM */
 		dev->base_addr = MVME_I596_BASE;
 		dev->irq = (unsigned) MVME16x_IRQ_I596;
 		goto found;
-- 
2.33.0

[PATCH 4.9 23/57] sparc: avoid stringop-overread errors

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

[ Upstream commit fc7c028dcdbfe981bca75d2a7b95f363eb691ef3 ]

The sparc mdesc code does pointer games with 'struct mdesc_hdr', but
didn't describe to the compiler how that header is then followed by the
data that the header describes.

As a result, gcc is now unhappy since it does stricter pointer range
tracking, and doesn't understand about how these things work.  This
results in various errors like:

    arch/sparc/kernel/mdesc.c: In function ‘mdesc_node_by_name’:
    arch/sparc/kernel/mdesc.c:647:22: error: ‘strcmp’ reading 1 or more bytes from a region of size 0 [-Werror=stringop-overread]
      647 |                 if (!strcmp(names + ep[ret].name_offset, name))
          |                      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

which are easily avoided by just describing 'struct mdesc_hdr' better,
and making the node_block() helper function look into that unsized
data[] that follows the header.

This makes the sparc64 build happy again at least for my cross-compiler
version (gcc version 11.2.1).

Link: https://lore.kernel.org/lkml/CAHk-=wi4NW3NC0xWykkw=6LnjQD6D_rtRtxY9g8gQAJXtQMi8A@mail.gmail.com/
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sparc/kernel/mdesc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/sparc/kernel/mdesc.c b/arch/sparc/kernel/mdesc.c
index 8a6982dfd733..5aa33bf7139e 100644
--- a/arch/sparc/kernel/mdesc.c
+++ b/arch/sparc/kernel/mdesc.c
@@ -37,6 +37,7 @@ struct mdesc_hdr {
 	u32	node_sz; /* node block size */
 	u32	name_sz; /* name block size */
 	u32	data_sz; /* data block size */
+	char	data[];
 } __attribute__((aligned(16)));
 
 struct mdesc_elem {
@@ -369,7 +370,7 @@ out:
 
 static struct mdesc_elem *node_block(struct mdesc_hdr *mdesc)
 {
-	return (struct mdesc_elem *) (mdesc + 1);
+	return (struct mdesc_elem *) mdesc->data;
 }
 
 static void *name_block(struct mdesc_hdr *mdesc)
-- 
2.33.0

[PATCH 4.9 24/57] qnx4: avoid stringop-overread errors

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

[ Upstream commit b7213ffa0e585feb1aee3e7173e965e66ee0abaa ]

The qnx4 directory entries are 64-byte blocks that have different
contents depending on the a status byte that is in the last byte of the
block.

In particular, a directory entry can be either a "link info" entry with
a 48-byte name and pointers to the real inode information, or an "inode
entry" with a smaller 16-byte name and the full inode information.

But the code was written to always just treat the directory name as if
it was part of that "inode entry", and just extend the name to the
longer case if the status byte said it was a link entry.

That work just fine and gives the right results, but now that gcc is
tracking data structure accesses much more, the code can trigger a
compiler error about using up to 48 bytes (the long name) in a structure
that only has that shorter name in it:

   fs/qnx4/dir.c: In function ‘qnx4_readdir’:
   fs/qnx4/dir.c:51:32: error: ‘strnlen’ specified bound 48 exceeds source size 16 [-Werror=stringop-overread]
      51 |                         size = strnlen(de->di_fname, size);
         |                                ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   In file included from fs/qnx4/qnx4.h:3,
                    from fs/qnx4/dir.c:16:
   include/uapi/linux/qnx4_fs.h:45:25: note: source object declared here
      45 |         char            di_fname[QNX4_SHORT_NAME_MAX];
         |                         ^~~~~~~~

which is because the source code doesn't really make this whole "one of
two different types" explicit.

Fix this by introducing a very explicit union of the two types, and
basically explaining to the compiler what is really going on.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/qnx4/dir.c | 51 ++++++++++++++++++++++++++++++++++-----------------
 1 file changed, 34 insertions(+), 17 deletions(-)

diff --git a/fs/qnx4/dir.c b/fs/qnx4/dir.c
index 781056a0480f..740a0bdd360f 100644
--- a/fs/qnx4/dir.c
+++ b/fs/qnx4/dir.c
@@ -14,13 +14,27 @@
 #include <linux/buffer_head.h>
 #include "qnx4.h"
 
+/*
+ * A qnx4 directory entry is an inode entry or link info
+ * depending on the status field in the last byte. The
+ * first byte is where the name start either way, and a
+ * zero means it's empty.
+ */
+union qnx4_directory_entry {
+	struct {
+		char de_name;
+		char de_pad[62];
+		char de_status;
+	};
+	struct qnx4_inode_entry inode;
+	struct qnx4_link_info link;
+};
+
 static int qnx4_readdir(struct file *file, struct dir_context *ctx)
 {
 	struct inode *inode = file_inode(file);
 	unsigned int offset;
 	struct buffer_head *bh;
-	struct qnx4_inode_entry *de;
-	struct qnx4_link_info *le;
 	unsigned long blknum;
 	int ix, ino;
 	int size;
@@ -37,27 +51,30 @@ static int qnx4_readdir(struct file *file, struct dir_context *ctx)
 		}
 		ix = (ctx->pos >> QNX4_DIR_ENTRY_SIZE_BITS) % QNX4_INODES_PER_BLOCK;
 		for (; ix < QNX4_INODES_PER_BLOCK; ix++, ctx->pos += QNX4_DIR_ENTRY_SIZE) {
+			union qnx4_directory_entry *de;
+			const char *name;
+
 			offset = ix * QNX4_DIR_ENTRY_SIZE;
-			de = (struct qnx4_inode_entry *) (bh->b_data + offset);
-			if (!de->di_fname[0])
+			de = (union qnx4_directory_entry *) (bh->b_data + offset);
+
+			if (!de->de_name)
 				continue;
-			if (!(de->di_status & (QNX4_FILE_USED|QNX4_FILE_LINK)))
+			if (!(de->de_status & (QNX4_FILE_USED|QNX4_FILE_LINK)))
 				continue;
-			if (!(de->di_status & QNX4_FILE_LINK))
-				size = QNX4_SHORT_NAME_MAX;
-			else
-				size = QNX4_NAME_MAX;
-			size = strnlen(de->di_fname, size);
-			QNX4DEBUG((KERN_INFO "qnx4_readdir:%.*s\n", size, de->di_fname));
-			if (!(de->di_status & QNX4_FILE_LINK))
+			if (!(de->de_status & QNX4_FILE_LINK)) {
+				size = sizeof(de->inode.di_fname);
+				name = de->inode.di_fname;
 				ino = blknum * QNX4_INODES_PER_BLOCK + ix - 1;
-			else {
-				le  = (struct qnx4_link_info*)de;
-				ino = ( le32_to_cpu(le->dl_inode_blk) - 1 ) *
+			} else {
+				size = sizeof(de->link.dl_fname);
+				name = de->link.dl_fname;
+				ino = ( le32_to_cpu(de->link.dl_inode_blk) - 1 ) *
 					QNX4_INODES_PER_BLOCK +
-					le->dl_inode_ndx;
+					de->link.dl_inode_ndx;
 			}
-			if (!dir_emit(ctx, de->di_fname, size, ino, DT_UNKNOWN)) {
+			size = strnlen(name, size);
+			QNX4DEBUG((KERN_INFO "qnx4_readdir:%.*s\n", size, name));
+			if (!dir_emit(ctx, name, size, ino, DT_UNKNOWN)) {
 				brelse(bh);
 				return 0;
 			}
-- 
2.33.0

[PATCH 4.9 25/57] parisc: Use absolute_pointer() to define PAGE0

[Greg Kroah-Hartman]

From: Helge Deller <deller@gmx.de>

[ Upstream commit 90cc7bed1ed19f869ae7221a6b41887fe762a6a3 ]

Use absolute_pointer() wrapper for PAGE0 to avoid this compiler warning:

  arch/parisc/kernel/setup.c: In function 'start_parisc':
  error: '__builtin_memcmp_eq' specified bound 8 exceeds source size 0

Signed-off-by: Helge Deller <deller@gmx.de>
Co-Developed-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/parisc/include/asm/page.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/parisc/include/asm/page.h b/arch/parisc/include/asm/page.h
index 80e742a1c162..088888fcf8df 100644
--- a/arch/parisc/include/asm/page.h
+++ b/arch/parisc/include/asm/page.h
@@ -174,7 +174,7 @@ extern int npmem_ranges;
 #include <asm-generic/getorder.h>
 #include <asm/pdc.h>
 
-#define PAGE0   ((struct zeropage *)__PAGE_OFFSET)
+#define PAGE0   ((struct zeropage *)absolute_pointer(__PAGE_OFFSET))
 
 /* DEFINITION OF THE ZERO-PAGE (PAG0) */
 /* based on work by Jason Eckhardt (jason@equator.com) */
-- 
2.33.0

[PATCH 4.9 26/57] arm64: Mark __stack_chk_guard as __ro_after_init

[Greg Kroah-Hartman]

From: Dan Li <ashimida@linux.alibaba.com>

[ Upstream commit 9fcb2e93f41c07a400885325e7dbdfceba6efaec ]

__stack_chk_guard is setup once while init stage and never changed
after that.

Although the modification of this variable at runtime will usually
cause the kernel to crash (so does the attacker), it should be marked
as __ro_after_init, and it should not affect performance if it is
placed in the ro_after_init section.

Signed-off-by: Dan Li <ashimida@linux.alibaba.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1631612642-102881-1-git-send-email-ashimida@linux.alibaba.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/process.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index e917d119490c..9c62365f8267 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -57,7 +57,7 @@
 
 #ifdef CONFIG_CC_STACKPROTECTOR
 #include <linux/stackprotector.h>
-unsigned long __stack_chk_guard __read_mostly;
+unsigned long __stack_chk_guard __ro_after_init;
 EXPORT_SYMBOL(__stack_chk_guard);
 #endif
 
-- 
2.33.0

[PATCH 4.9 27/57] alpha: Declare virt_to_phys and virt_to_bus parameter as pointer to volatile

[Greg Kroah-Hartman]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit 35a3f4ef0ab543daa1725b0c963eb8c05e3376f8 ]

Some drivers pass a pointer to volatile data to virt_to_bus() and
virt_to_phys(), and that works fine.  One exception is alpha.  This
results in a number of compile errors such as

  drivers/net/wan/lmc/lmc_main.c: In function 'lmc_softreset':
  drivers/net/wan/lmc/lmc_main.c:1782:50: error:
	passing argument 1 of 'virt_to_bus' discards 'volatile'
	qualifier from pointer target type

  drivers/atm/ambassador.c: In function 'do_loader_command':
  drivers/atm/ambassador.c:1747:58: error:
	passing argument 1 of 'virt_to_bus' discards 'volatile'
	qualifier from pointer target type

Declare the parameter of virt_to_phys and virt_to_bus as pointer to
volatile to fix the problem.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/alpha/include/asm/io.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/alpha/include/asm/io.h b/arch/alpha/include/asm/io.h
index 355aec0867f4..e55a5e6ab460 100644
--- a/arch/alpha/include/asm/io.h
+++ b/arch/alpha/include/asm/io.h
@@ -60,7 +60,7 @@ extern inline void set_hae(unsigned long new_hae)
  * Change virtual addresses to physical addresses and vv.
  */
 #ifdef USE_48_BIT_KSEG
-static inline unsigned long virt_to_phys(void *address)
+static inline unsigned long virt_to_phys(volatile void *address)
 {
 	return (unsigned long)address - IDENT_ADDR;
 }
@@ -70,7 +70,7 @@ static inline void * phys_to_virt(unsigned long address)
 	return (void *) (address + IDENT_ADDR);
 }
 #else
-static inline unsigned long virt_to_phys(void *address)
+static inline unsigned long virt_to_phys(volatile void *address)
 {
         unsigned long phys = (unsigned long)address;
 
@@ -111,7 +111,7 @@ static inline dma_addr_t __deprecated isa_page_to_bus(struct page *page)
 extern unsigned long __direct_map_base;
 extern unsigned long __direct_map_size;
 
-static inline unsigned long __deprecated virt_to_bus(void *address)
+static inline unsigned long __deprecated virt_to_bus(volatile void *address)
 {
 	unsigned long phys = virt_to_phys(address);
 	unsigned long bus = phys + __direct_map_base;
-- 
2.33.0

[PATCH 4.9 28/57] net: 6pack: Fix tx timeout and slot time

[Greg Kroah-Hartman]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit 3c0d2a46c0141913dc6fd126c57d0615677d946e ]

tx timeout and slot time are currently specified in units of HZ.  On
Alpha, HZ is defined as 1024.  When building alpha:allmodconfig, this
results in the following error message.

  drivers/net/hamradio/6pack.c: In function 'sixpack_open':
  drivers/net/hamradio/6pack.c:71:41: error:
  	unsigned conversion from 'int' to 'unsigned char'
  	changes value from '256' to '0'

In the 6PACK protocol, tx timeout is specified in units of 10 ms and
transmitted over the wire:

    https://www.linux-ax25.org/wiki/6PACK

Defining a value dependent on HZ doesn't really make sense, and
presumably comes from the (very historical) situation where HZ was
originally 100.

Note that the SIXP_SLOTTIME use explicitly is about 10ms granularity:

        mod_timer(&sp->tx_t, jiffies + ((when + 1) * HZ) / 100);

and the SIXP_TXDELAY walue is sent as a byte over the wire.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/hamradio/6pack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c
index e510dbda77e5..96fb2a2a59f0 100644
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -68,9 +68,9 @@
 #define SIXP_DAMA_OFF		0
 
 /* default level 2 parameters */
-#define SIXP_TXDELAY			(HZ/4)	/* in 1 s */
+#define SIXP_TXDELAY			25	/* 250 ms */
 #define SIXP_PERSIST			50	/* in 256ths */
-#define SIXP_SLOTTIME			(HZ/10)	/* in 1 s */
+#define SIXP_SLOTTIME			10	/* 100 ms */
 #define SIXP_INIT_RESYNC_TIMEOUT	(3*HZ/2) /* in 1 s */
 #define SIXP_RESYNC_TIMEOUT		5*HZ	/* in 1 s */
 
-- 
2.33.0

[PATCH 4.9 29/57] spi: Fix tegra20 build with CONFIG_PM=n

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

[ Upstream commit efafec27c5658ed987e720130772f8933c685e87 ]

Without CONFIG_PM enabled, the SET_RUNTIME_PM_OPS() macro ends up being
empty, and the only use of tegra_slink_runtime_{resume,suspend} goes
away, resulting in

  drivers/spi/spi-tegra20-slink.c:1200:12: error: ‘tegra_slink_runtime_resume’ defined but not used [-Werror=unused-function]
   1200 | static int tegra_slink_runtime_resume(struct device *dev)
        |            ^~~~~~~~~~~~~~~~~~~~~~~~~~
  drivers/spi/spi-tegra20-slink.c:1188:12: error: ‘tegra_slink_runtime_suspend’ defined but not used [-Werror=unused-function]
   1188 | static int tegra_slink_runtime_suspend(struct device *dev)
        |            ^~~~~~~~~~~~~~~~~~~~~~~~~~~

mark the functions __maybe_unused to make the build happy.

This hits the alpha allmodconfig build (and others).

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-tegra20-slink.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c
index 9f14560686b6..88bfe7682a9e 100644
--- a/drivers/spi/spi-tegra20-slink.c
+++ b/drivers/spi/spi-tegra20-slink.c
@@ -1210,7 +1210,7 @@ static int tegra_slink_resume(struct device *dev)
 }
 #endif
 
-static int tegra_slink_runtime_suspend(struct device *dev)
+static int __maybe_unused tegra_slink_runtime_suspend(struct device *dev)
 {
 	struct spi_master *master = dev_get_drvdata(dev);
 	struct tegra_slink_data *tspi = spi_master_get_devdata(master);
@@ -1222,7 +1222,7 @@ static int tegra_slink_runtime_suspend(struct device *dev)
 	return 0;
 }
 
-static int tegra_slink_runtime_resume(struct device *dev)
+static int __maybe_unused tegra_slink_runtime_resume(struct device *dev)
 {
 	struct spi_master *master = dev_get_drvdata(dev);
 	struct tegra_slink_data *tspi = spi_master_get_devdata(master);
-- 
2.33.0

[PATCH 4.9 30/57] arm64: dts: marvell: armada-37xx: Extend PCIe MEM space

[Greg Kroah-Hartman]

From: Pali Rohár <pali@kernel.org>

commit 514ef1e62d6521c2199d192b1c71b79d2aa21d5a upstream.

Current PCIe MEM space of size 16 MB is not enough for some combination
of PCIe cards (e.g. NVMe disk together with ath11k wifi card). ARM Trusted
Firmware for Armada 3700 platform already assigns 128 MB for PCIe window,
so extend PCIe MEM space to the end of 128 MB PCIe window which allows to
allocate more PCIe BARs for more PCIe cards.

Without this change some combination of PCIe cards cannot be used and
kernel show error messages in dmesg during initialization:

    pci 0000:00:00.0: BAR 8: no space for [mem size 0x01800000]
    pci 0000:00:00.0: BAR 8: failed to assign [mem size 0x01800000]
    pci 0000:00:00.0: BAR 6: assigned [mem 0xe8000000-0xe80007ff pref]
    pci 0000:01:00.0: BAR 8: no space for [mem size 0x01800000]
    pci 0000:01:00.0: BAR 8: failed to assign [mem size 0x01800000]
    pci 0000:02:03.0: BAR 8: no space for [mem size 0x01000000]
    pci 0000:02:03.0: BAR 8: failed to assign [mem size 0x01000000]
    pci 0000:02:07.0: BAR 8: no space for [mem size 0x00100000]
    pci 0000:02:07.0: BAR 8: failed to assign [mem size 0x00100000]
    pci 0000:03:00.0: BAR 0: no space for [mem size 0x01000000 64bit]
    pci 0000:03:00.0: BAR 0: failed to assign [mem size 0x01000000 64bit]

Due to bugs in U-Boot port for Turris Mox, the second range in Turris Mox
kernel DTS file for PCIe must start at 16 MB offset. Otherwise U-Boot
crashes during loading of kernel DTB file. This bug is present only in
U-Boot code for Turris Mox and therefore other Armada 3700 devices are not
affected by this bug. Bug is fixed in U-Boot version 2021.07.

To not break booting new kernels on existing versions of U-Boot on Turris
Mox, use first 16 MB range for IO and second range with rest of PCIe window
for MEM.

Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 76f6386b25cc ("arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -186,8 +186,15 @@
 			#interrupt-cells = <1>;
 			msi-parent = <&pcie0>;
 			msi-controller;
-			ranges = <0x82000000 0 0xe8000000   0 0xe8000000 0 0x1000000 /* Port 0 MEM */
-				  0x81000000 0 0xe9000000   0 0xe9000000 0 0x10000>; /* Port 0 IO*/
+			/*
+			 * The 128 MiB address range [0xe8000000-0xf0000000] is
+			 * dedicated for PCIe and can be assigned to 8 windows
+			 * with size a power of two. Use one 64 KiB window for
+			 * IO at the end and the remaining seven windows
+			 * (totaling 127 MiB) for MEM.
+			 */
+			ranges = <0x82000000 0 0xe8000000   0 0xe8000000   0 0x07f00000   /* Port 0 MEM */
+				  0x81000000 0 0xefff0000   0 0xefff0000   0 0x00010000>; /* Port 0 IO */
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc 0>,
 					<0 0 0 2 &pcie_intc 1>,

[PATCH 4.9 31/57] qnx4: work around gcc false positive warning bug

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

commit d5f6545934c47e97c0b48a645418e877b452a992 upstream.

In commit b7213ffa0e58 ("qnx4: avoid stringop-overread errors") I tried
to teach gcc about how the directory entry structure can be two
different things depending on a status flag.  It made the code clearer,
and it seemed to make gcc happy.

However, Arnd points to a gcc bug, where despite using two different
members of a union, gcc then gets confused, and uses the size of one of
the members to decide if a string overrun happens.  And not necessarily
the rigth one.

End result: with some configurations, gcc-11 will still complain about
the source buffer size being overread:

  fs/qnx4/dir.c: In function 'qnx4_readdir':
  fs/qnx4/dir.c:76:32: error: 'strnlen' specified bound [16, 48] exceeds source size 1 [-Werror=stringop-overread]
     76 |                         size = strnlen(name, size);
        |                                ^~~~~~~~~~~~~~~~~~~
  fs/qnx4/dir.c:26:22: note: source object declared here
     26 |                 char de_name;
        |                      ^~~~~~~

because gcc will get confused about which union member entry is actually
getting accessed, even when the source code is very clear about it.  Gcc
internally will have combined two "redundant" pointers (pointing to
different union elements that are at the same offset), and takes the
size checking from one or the other - not necessarily the right one.

This is clearly a gcc bug, but we can work around it fairly easily.  The
biggest thing here is the big honking comment about why we do what we
do.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578#c6
Reported-and-tested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/qnx4/dir.c |   36 +++++++++++++++++++++++++++---------
 1 file changed, 27 insertions(+), 9 deletions(-)

--- a/fs/qnx4/dir.c
+++ b/fs/qnx4/dir.c
@@ -19,12 +19,33 @@
  * depending on the status field in the last byte. The
  * first byte is where the name start either way, and a
  * zero means it's empty.
+ *
+ * Also, due to a bug in gcc, we don't want to use the
+ * real (differently sized) name arrays in the inode and
+ * link entries, but always the 'de_name[]' one in the
+ * fake struct entry.
+ *
+ * See
+ *
+ *   https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578#c6
+ *
+ * for details, but basically gcc will take the size of the
+ * 'name' array from one of the used union entries randomly.
+ *
+ * This use of 'de_name[]' (48 bytes) avoids the false positive
+ * warnings that would happen if gcc decides to use 'inode.di_name'
+ * (16 bytes) even when the pointer and size were to come from
+ * 'link.dl_name' (48 bytes).
+ *
+ * In all cases the actual name pointer itself is the same, it's
+ * only the gcc internal 'what is the size of this field' logic
+ * that can get confused.
  */
 union qnx4_directory_entry {
 	struct {
-		char de_name;
-		char de_pad[62];
-		char de_status;
+		const char de_name[48];
+		u8 de_pad[15];
+		u8 de_status;
 	};
 	struct qnx4_inode_entry inode;
 	struct qnx4_link_info link;
@@ -52,29 +73,26 @@ static int qnx4_readdir(struct file *fil
 		ix = (ctx->pos >> QNX4_DIR_ENTRY_SIZE_BITS) % QNX4_INODES_PER_BLOCK;
 		for (; ix < QNX4_INODES_PER_BLOCK; ix++, ctx->pos += QNX4_DIR_ENTRY_SIZE) {
 			union qnx4_directory_entry *de;
-			const char *name;
 
 			offset = ix * QNX4_DIR_ENTRY_SIZE;
 			de = (union qnx4_directory_entry *) (bh->b_data + offset);
 
-			if (!de->de_name)
+			if (!de->de_name[0])
 				continue;
 			if (!(de->de_status & (QNX4_FILE_USED|QNX4_FILE_LINK)))
 				continue;
 			if (!(de->de_status & QNX4_FILE_LINK)) {
 				size = sizeof(de->inode.di_fname);
-				name = de->inode.di_fname;
 				ino = blknum * QNX4_INODES_PER_BLOCK + ix - 1;
 			} else {
 				size = sizeof(de->link.dl_fname);
-				name = de->link.dl_fname;
 				ino = ( le32_to_cpu(de->link.dl_inode_blk) - 1 ) *
 					QNX4_INODES_PER_BLOCK +
 					de->link.dl_inode_ndx;
 			}
-			size = strnlen(name, size);
+			size = strnlen(de->de_name, size);
 			QNX4DEBUG((KERN_INFO "qnx4_readdir:%.*s\n", size, name));
-			if (!dir_emit(ctx, name, size, ino, DT_UNKNOWN)) {
+			if (!dir_emit(ctx, de->de_name, size, ino, DT_UNKNOWN)) {
 				brelse(bh);
 				return 0;
 			}

[PATCH 4.9 32/57] tty: Fix out-of-bound vmalloc access in imageblit

[Greg Kroah-Hartman]

From: Igor Matheus Andrade Torrente <igormtorrente@gmail.com>

[ Upstream commit 3b0c406124719b625b1aba431659f5cdc24a982c ]

This issue happens when a userspace program does an ioctl
FBIOPUT_VSCREENINFO passing the fb_var_screeninfo struct
containing only the fields xres, yres, and bits_per_pixel
with values.

If this struct is the same as the previous ioctl, the
vc_resize() detects it and doesn't call the resize_screen(),
leaving the fb_var_screeninfo incomplete. And this leads to
the updatescrollmode() calculates a wrong value to
fbcon_display->vrows, which makes the real_y() return a
wrong value of y, and that value, eventually, causes
the imageblit to access an out-of-bound address value.

To solve this issue I made the resize_screen() be called
even if the screen does not need any resizing, so it will
"fix and fill" the fb_var_screeninfo independently.

Cc: stable <stable@vger.kernel.org> # after 5.15-rc2 is out, give it time to bake
Reported-and-tested-by: syzbot+858dc7a2f7ef07c2c219@syzkaller.appspotmail.com
Signed-off-by: Igor Matheus Andrade Torrente <igormtorrente@gmail.com>
Link: https://lore.kernel.org/r/20210628134509.15895-1-igormtorrente@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/vt/vt.c | 21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 8c74d9ebfc50..9f1573b0e453 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -886,8 +886,25 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc,
 	new_row_size = new_cols << 1;
 	new_screen_size = new_row_size * new_rows;
 
-	if (new_cols == vc->vc_cols && new_rows == vc->vc_rows)
-		return 0;
+	if (new_cols == vc->vc_cols && new_rows == vc->vc_rows) {
+		/*
+		 * This function is being called here to cover the case
+		 * where the userspace calls the FBIOPUT_VSCREENINFO twice,
+		 * passing the same fb_var_screeninfo containing the fields
+		 * yres/xres equal to a number non-multiple of vc_font.height
+		 * and yres_virtual/xres_virtual equal to number lesser than the
+		 * vc_font.height and yres/xres.
+		 * In the second call, the struct fb_var_screeninfo isn't
+		 * being modified by the underlying driver because of the
+		 * if above, and this causes the fbcon_display->vrows to become
+		 * negative and it eventually leads to out-of-bound
+		 * access by the imageblit function.
+		 * To give the correct values to the struct and to not have
+		 * to deal with possible errors from the code below, we call
+		 * the resize_screen here as well.
+		 */
+		return resize_screen(vc, new_cols, new_rows, user);
+	}
 
 	if (new_screen_size > (4 << 20) || !new_screen_size)
 		return -EINVAL;
-- 
2.33.0

[PATCH 4.9 33/57] cpufreq: schedutil: Use kobject release() method to free sugov_tunables

[Greg Kroah-Hartman]

From: Kevin Hao <haokexin@gmail.com>

[ Upstream commit e5c6b312ce3cc97e90ea159446e6bfa06645364d ]

The struct sugov_tunables is protected by the kobject, so we can't free
it directly. Otherwise we would get a call trace like this:
  ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x30
  WARNING: CPU: 3 PID: 720 at lib/debugobjects.c:505 debug_print_object+0xb8/0x100
  Modules linked in:
  CPU: 3 PID: 720 Comm: a.sh Tainted: G        W         5.14.0-rc1-next-20210715-yocto-standard+ #507
  Hardware name: Marvell OcteonTX CN96XX board (DT)
  pstate: 40400009 (nZcv daif +PAN -UAO -TCO BTYPE=--)
  pc : debug_print_object+0xb8/0x100
  lr : debug_print_object+0xb8/0x100
  sp : ffff80001ecaf910
  x29: ffff80001ecaf910 x28: ffff00011b10b8d0 x27: ffff800011043d80
  x26: ffff00011a8f0000 x25: ffff800013cb3ff0 x24: 0000000000000000
  x23: ffff80001142aa68 x22: ffff800011043d80 x21: ffff00010de46f20
  x20: ffff800013c0c520 x19: ffff800011d8f5b0 x18: 0000000000000010
  x17: 6e6968207473696c x16: 5f72656d6974203a x15: 6570797420746365
  x14: 6a626f2029302065 x13: 303378302f307830 x12: 2b6e665f72656d69
  x11: ffff8000124b1560 x10: ffff800012331520 x9 : ffff8000100ca6b0
  x8 : 000000000017ffe8 x7 : c0000000fffeffff x6 : 0000000000000001
  x5 : ffff800011d8c000 x4 : ffff800011d8c740 x3 : 0000000000000000
  x2 : ffff0001108301c0 x1 : ab3c90eedf9c0f00 x0 : 0000000000000000
  Call trace:
   debug_print_object+0xb8/0x100
   __debug_check_no_obj_freed+0x1c0/0x230
   debug_check_no_obj_freed+0x20/0x88
   slab_free_freelist_hook+0x154/0x1c8
   kfree+0x114/0x5d0
   sugov_exit+0xbc/0xc0
   cpufreq_exit_governor+0x44/0x90
   cpufreq_set_policy+0x268/0x4a8
   store_scaling_governor+0xe0/0x128
   store+0xc0/0xf0
   sysfs_kf_write+0x54/0x80
   kernfs_fop_write_iter+0x128/0x1c0
   new_sync_write+0xf0/0x190
   vfs_write+0x2d4/0x478
   ksys_write+0x74/0x100
   __arm64_sys_write+0x24/0x30
   invoke_syscall.constprop.0+0x54/0xe0
   do_el0_svc+0x64/0x158
   el0_svc+0x2c/0xb0
   el0t_64_sync_handler+0xb0/0xb8
   el0t_64_sync+0x198/0x19c
  irq event stamp: 5518
  hardirqs last  enabled at (5517): [<ffff8000100cbd7c>] console_unlock+0x554/0x6c8
  hardirqs last disabled at (5518): [<ffff800010fc0638>] el1_dbg+0x28/0xa0
  softirqs last  enabled at (5504): [<ffff8000100106e0>] __do_softirq+0x4d0/0x6c0
  softirqs last disabled at (5483): [<ffff800010049548>] irq_exit+0x1b0/0x1b8

So split the original sugov_tunables_free() into two functions,
sugov_clear_global_tunables() is just used to clear the global_tunables
and the new sugov_tunables_free() is used as kobj_type::release to
release the sugov_tunables safely.

Fixes: 9bdcb44e391d ("cpufreq: schedutil: New governor based on scheduler utilization data")
Cc: 4.7+ <stable@vger.kernel.org> # 4.7+
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/cpufreq_schedutil.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c
index cb771c76682e..f85802b55197 100644
--- a/kernel/sched/cpufreq_schedutil.c
+++ b/kernel/sched/cpufreq_schedutil.c
@@ -353,9 +353,17 @@ static struct attribute *sugov_attributes[] = {
 	NULL
 };
 
+static void sugov_tunables_free(struct kobject *kobj)
+{
+	struct gov_attr_set *attr_set = container_of(kobj, struct gov_attr_set, kobj);
+
+	kfree(to_sugov_tunables(attr_set));
+}
+
 static struct kobj_type sugov_tunables_ktype = {
 	.default_attrs = sugov_attributes,
 	.sysfs_ops = &governor_sysfs_ops,
+	.release = &sugov_tunables_free,
 };
 
 /********************** cpufreq governor interface *********************/
@@ -397,12 +405,10 @@ static struct sugov_tunables *sugov_tunables_alloc(struct sugov_policy *sg_polic
 	return tunables;
 }
 
-static void sugov_tunables_free(struct sugov_tunables *tunables)
+static void sugov_clear_global_tunables(void)
 {
 	if (!have_governor_per_policy())
 		global_tunables = NULL;
-
-	kfree(tunables);
 }
 
 static int sugov_init(struct cpufreq_policy *policy)
@@ -462,7 +468,7 @@ static int sugov_init(struct cpufreq_policy *policy)
 
  fail:
 	policy->governor_data = NULL;
-	sugov_tunables_free(tunables);
+	sugov_clear_global_tunables();
 
  free_sg_policy:
 	mutex_unlock(&global_tunables_lock);
@@ -485,7 +491,7 @@ static void sugov_exit(struct cpufreq_policy *policy)
 	count = gov_attr_set_put(&tunables->attr_set, &sg_policy->tunables_hook);
 	policy->governor_data = NULL;
 	if (!count)
-		sugov_tunables_free(tunables);
+		sugov_clear_global_tunables();
 
 	mutex_unlock(&global_tunables_lock);
 
-- 
2.33.0

[PATCH 4.9 34/57] cpufreq: schedutil: Destroy mutex before kobject_put() frees the memory

[Greg Kroah-Hartman]

From: James Morse <james.morse@arm.com>

[ Upstream commit cdef1196608892b9a46caa5f2b64095a7f0be60c ]

Since commit e5c6b312ce3c ("cpufreq: schedutil: Use kobject release()
method to free sugov_tunables") kobject_put() has kfree()d the
attr_set before gov_attr_set_put() returns.

kobject_put() isn't the last user of attr_set in gov_attr_set_put(),
the subsequent mutex_destroy() triggers a use-after-free:
| BUG: KASAN: use-after-free in mutex_is_locked+0x20/0x60
| Read of size 8 at addr ffff000800ca4250 by task cpuhp/2/20
|
| CPU: 2 PID: 20 Comm: cpuhp/2 Not tainted 5.15.0-rc1 #12369
| Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development
| Platform, BIOS EDK II Jul 30 2018
| Call trace:
|  dump_backtrace+0x0/0x380
|  show_stack+0x1c/0x30
|  dump_stack_lvl+0x8c/0xb8
|  print_address_description.constprop.0+0x74/0x2b8
|  kasan_report+0x1f4/0x210
|  kasan_check_range+0xfc/0x1a4
|  __kasan_check_read+0x38/0x60
|  mutex_is_locked+0x20/0x60
|  mutex_destroy+0x80/0x100
|  gov_attr_set_put+0xfc/0x150
|  sugov_exit+0x78/0x190
|  cpufreq_offline.isra.0+0x2c0/0x660
|  cpuhp_cpufreq_offline+0x14/0x24
|  cpuhp_invoke_callback+0x430/0x6d0
|  cpuhp_thread_fun+0x1b0/0x624
|  smpboot_thread_fn+0x5e0/0xa6c
|  kthread+0x3a0/0x450
|  ret_from_fork+0x10/0x20

Swap the order of the calls.

Fixes: e5c6b312ce3c ("cpufreq: schedutil: Use kobject release() method to free sugov_tunables")
Cc: 4.7+ <stable@vger.kernel.org> # 4.7+
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/cpufreq_governor_attr_set.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/cpufreq/cpufreq_governor_attr_set.c b/drivers/cpufreq/cpufreq_governor_attr_set.c
index 52841f807a7e..45fdf30cade3 100644
--- a/drivers/cpufreq/cpufreq_governor_attr_set.c
+++ b/drivers/cpufreq/cpufreq_governor_attr_set.c
@@ -77,8 +77,8 @@ unsigned int gov_attr_set_put(struct gov_attr_set *attr_set, struct list_head *l
 	if (count)
 		return count;
 
-	kobject_put(&attr_set->kobj);
 	mutex_destroy(&attr_set->update_lock);
+	kobject_put(&attr_set->kobj);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(gov_attr_set_put);
-- 
2.33.0

[PATCH 4.9 35/57] mac80211: fix use-after-free in CCMP/GCMP RX

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

commit 94513069eb549737bcfc3d988d6ed4da948a2de8 upstream.

When PN checking is done in mac80211, for fragmentation we need
to copy the PN to the RX struct so we can later use it to do a
comparison, since commit bf30ca922a0c ("mac80211: check defrag
PN against current frame").

Unfortunately, in that commit I used the 'hdr' variable without
it being necessarily valid, so use-after-free could occur if it
was necessary to reallocate (parts of) the frame.

Fix this by reloading the variable after the code that results
in the reallocations, if any.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=214401.

Cc: stable@vger.kernel.org
Fixes: bf30ca922a0c ("mac80211: check defrag PN against current frame")
Link: https://lore.kernel.org/r/20210927115838.12b9ac6bb233.I1d066acd5408a662c3b6e828122cd314fcb28cdb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mac80211/wpa.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/net/mac80211/wpa.c
+++ b/net/mac80211/wpa.c
@@ -514,6 +514,9 @@ ieee80211_crypto_ccmp_decrypt(struct iee
 			return RX_DROP_UNUSABLE;
 	}
 
+	/* reload hdr - skb might have been reallocated */
+	hdr = (void *)rx->skb->data;
+
 	data_len = skb->len - hdrlen - IEEE80211_CCMP_HDR_LEN - mic_len;
 	if (!rx->sta || data_len < 0)
 		return RX_DROP_UNUSABLE;
@@ -744,6 +747,9 @@ ieee80211_crypto_gcmp_decrypt(struct iee
 			return RX_DROP_UNUSABLE;
 	}
 
+	/* reload hdr - skb might have been reallocated */
+	hdr = (void *)rx->skb->data;
+
 	data_len = skb->len - hdrlen - IEEE80211_GCMP_HDR_LEN - mic_len;
 	if (!rx->sta || data_len < 0)
 		return RX_DROP_UNUSABLE;

[PATCH 4.9 36/57] ipvs: check that ip_vs_conn_tab_bits is between 8 and 20

[Greg Kroah-Hartman]

From: Andrea Claudi <aclaudi@redhat.com>

[ Upstream commit 69e73dbfda14fbfe748d3812da1244cce2928dcb ]

ip_vs_conn_tab_bits may be provided by the user through the
conn_tab_bits module parameter. If this value is greater than 31, or
less than 0, the shift operator used to derive tab_size causes undefined
behaviour.

Fix this checking ip_vs_conn_tab_bits value to be in the range specified
in ipvs Kconfig. If not, simply use default value.

Fixes: 6f7edb4881bf ("IPVS: Allow boot time change of hash size")
Reported-by: Yi Chen <yiche@redhat.com>
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/ipvs/ip_vs_conn.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/netfilter/ipvs/ip_vs_conn.c b/net/netfilter/ipvs/ip_vs_conn.c
index 096a45103f14..ecde2102d1ad 100644
--- a/net/netfilter/ipvs/ip_vs_conn.c
+++ b/net/netfilter/ipvs/ip_vs_conn.c
@@ -1406,6 +1406,10 @@ int __init ip_vs_conn_init(void)
 	int idx;
 
 	/* Compute size and mask */
+	if (ip_vs_conn_tab_bits < 8 || ip_vs_conn_tab_bits > 20) {
+		pr_info("conn_tab_bits not in [8, 20]. Using default value\n");
+		ip_vs_conn_tab_bits = CONFIG_IP_VS_TAB_BITS;
+	}
 	ip_vs_conn_tab_size = 1 << ip_vs_conn_tab_bits;
 	ip_vs_conn_tab_mask = ip_vs_conn_tab_size - 1;
 
-- 
2.33.0

[PATCH 4.9 37/57] mac80211: limit injected vht mcs/nss in ieee80211_parse_tx_radiotap

[Greg Kroah-Hartman]

From: Lorenzo Bianconi <lorenzo@kernel.org>

[ Upstream commit 13cb6d826e0ac0d144b0d48191ff1a111d32f0c6 ]

Limit max values for vht mcs and nss in ieee80211_parse_tx_radiotap
routine in order to fix the following warning reported by syzbot:

WARNING: CPU: 0 PID: 10717 at include/net/mac80211.h:989 ieee80211_rate_set_vht include/net/mac80211.h:989 [inline]
WARNING: CPU: 0 PID: 10717 at include/net/mac80211.h:989 ieee80211_parse_tx_radiotap+0x101e/0x12d0 net/mac80211/tx.c:2244
Modules linked in:
CPU: 0 PID: 10717 Comm: syz-executor.5 Not tainted 5.14.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:ieee80211_rate_set_vht include/net/mac80211.h:989 [inline]
RIP: 0010:ieee80211_parse_tx_radiotap+0x101e/0x12d0 net/mac80211/tx.c:2244
RSP: 0018:ffffc9000186f3e8 EFLAGS: 00010216
RAX: 0000000000000618 RBX: ffff88804ef76500 RCX: ffffc900143a5000
RDX: 0000000000040000 RSI: ffffffff888f478e RDI: 0000000000000003
RBP: 00000000ffffffff R08: 0000000000000000 R09: 0000000000000100
R10: ffffffff888f46f9 R11: 0000000000000000 R12: 00000000fffffff8
R13: ffff88804ef7653c R14: 0000000000000001 R15: 0000000000000004
FS:  00007fbf5718f700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2de23000 CR3: 000000006a671000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600
Call Trace:
 ieee80211_monitor_select_queue+0xa6/0x250 net/mac80211/iface.c:740
 netdev_core_pick_tx+0x169/0x2e0 net/core/dev.c:4089
 __dev_queue_xmit+0x6f9/0x3710 net/core/dev.c:4165
 __bpf_tx_skb net/core/filter.c:2114 [inline]
 __bpf_redirect_no_mac net/core/filter.c:2139 [inline]
 __bpf_redirect+0x5ba/0xd20 net/core/filter.c:2162
 ____bpf_clone_redirect net/core/filter.c:2429 [inline]
 bpf_clone_redirect+0x2ae/0x420 net/core/filter.c:2401
 bpf_prog_eeb6f53a69e5c6a2+0x59/0x234
 bpf_dispatcher_nop_func include/linux/bpf.h:717 [inline]
 __bpf_prog_run include/linux/filter.h:624 [inline]
 bpf_prog_run include/linux/filter.h:631 [inline]
 bpf_test_run+0x381/0xa30 net/bpf/test_run.c:119
 bpf_prog_test_run_skb+0xb84/0x1ee0 net/bpf/test_run.c:663
 bpf_prog_test_run kernel/bpf/syscall.c:3307 [inline]
 __sys_bpf+0x2137/0x5df0 kernel/bpf/syscall.c:4605
 __do_sys_bpf kernel/bpf/syscall.c:4691 [inline]
 __se_sys_bpf kernel/bpf/syscall.c:4689 [inline]
 __x64_sys_bpf+0x75/0xb0 kernel/bpf/syscall.c:4689
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x4665f9

Reported-by: syzbot+0196ac871673f0c20f68@syzkaller.appspotmail.com
Fixes: 646e76bb5daf4 ("mac80211: parse VHT info in injected frames")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/c26c3f02dcb38ab63b2f2534cb463d95ee81bb13.1632141760.git.lorenzo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/tx.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 48d0dd0beaa5..b6942b717a59 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -2064,7 +2064,11 @@ static bool ieee80211_parse_tx_radiotap(struct ieee80211_local *local,
 			}
 
 			vht_mcs = iterator.this_arg[4] >> 4;
+			if (vht_mcs > 11)
+				vht_mcs = 0;
 			vht_nss = iterator.this_arg[4] & 0xF;
+			if (!vht_nss || vht_nss > 8)
+				vht_nss = 1;
 			break;
 
 		/*
-- 
2.33.0

[PATCH 4.9 38/57] hwmon: (tmp421) fix rounding for negative values

[Greg Kroah-Hartman]

From: Paul Fertser <fercerpav@gmail.com>

[ Upstream commit 724e8af85854c4d3401313b6dd7d79cf792d8990 ]

Old code produces -24999 for 0b1110011100000000 input in standard format due to
always rounding up rather than "away from zero".

Use the common macro for division, unify and simplify the conversion code along
the way.

Fixes: 9410700b881f ("hwmon: Add driver for Texas Instruments TMP421/422/423 sensor chips")
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Link: https://lore.kernel.org/r/20210924093011.26083-3-fercerpav@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/tmp421.c | 24 ++++++++----------------
 1 file changed, 8 insertions(+), 16 deletions(-)

diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c
index bfb98b96c781..324e7aaeb0b1 100644
--- a/drivers/hwmon/tmp421.c
+++ b/drivers/hwmon/tmp421.c
@@ -83,23 +83,17 @@ struct tmp421_data {
 	s16 temp[4];
 };
 
-static int temp_from_s16(s16 reg)
+static int temp_from_raw(u16 reg, bool extended)
 {
 	/* Mask out status bits */
 	int temp = reg & ~0xf;
 
-	return (temp * 1000 + 128) / 256;
-}
-
-static int temp_from_u16(u16 reg)
-{
-	/* Mask out status bits */
-	int temp = reg & ~0xf;
-
-	/* Add offset for extended temperature range. */
-	temp -= 64 * 256;
+	if (extended)
+		temp = temp - 64 * 256;
+	else
+		temp = (s16)temp;
 
-	return (temp * 1000 + 128) / 256;
+	return DIV_ROUND_CLOSEST(temp * 1000, 256);
 }
 
 static struct tmp421_data *tmp421_update_device(struct device *dev)
@@ -136,10 +130,8 @@ static int tmp421_read(struct device *dev, enum hwmon_sensor_types type,
 
 	switch (attr) {
 	case hwmon_temp_input:
-		if (tmp421->config & TMP421_CONFIG_RANGE)
-			*val = temp_from_u16(tmp421->temp[channel]);
-		else
-			*val = temp_from_s16(tmp421->temp[channel]);
+		*val = temp_from_raw(tmp421->temp[channel],
+				     tmp421->config & TMP421_CONFIG_RANGE);
 		return 0;
 	case hwmon_temp_fault:
 		/*
-- 
2.33.0

[PATCH 4.9 39/57] e100: fix length calculation in e100_get_regs_len

[Greg Kroah-Hartman]

From: Jacob Keller <jacob.e.keller@intel.com>

[ Upstream commit 4329c8dc110b25d5f04ed20c6821bb60deff279f ]

commit abf9b902059f ("e100: cleanup unneeded math") tried to simplify
e100_get_regs_len and remove a double 'divide and then multiply'
calculation that the e100_reg_regs_len function did.

This change broke the size calculation entirely as it failed to account
for the fact that the numbered registers are actually 4 bytes wide and
not 1 byte. This resulted in a significant under allocation of the
register buffer used by e100_get_regs.

Fix this by properly multiplying the register count by u32 first before
adding the size of the dump buffer.

Fixes: abf9b902059f ("e100: cleanup unneeded math")
Reported-by: Felicitas Hetzelt <felicitashetzelt@gmail.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/e100.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c
index 9035cb5fc70d..abb65ed9492b 100644
--- a/drivers/net/ethernet/intel/e100.c
+++ b/drivers/net/ethernet/intel/e100.c
@@ -2466,7 +2466,11 @@ static void e100_get_drvinfo(struct net_device *netdev,
 static int e100_get_regs_len(struct net_device *netdev)
 {
 	struct nic *nic = netdev_priv(netdev);
-	return 1 + E100_PHY_REGS + sizeof(nic->mem->dump_buf);
+
+	/* We know the number of registers, and the size of the dump buffer.
+	 * Calculate the total size in bytes.
+	 */
+	return (1 + E100_PHY_REGS) * sizeof(u32) + sizeof(nic->mem->dump_buf);
 }
 
 static void e100_get_regs(struct net_device *netdev,
-- 
2.33.0

[PATCH 4.9 40/57] e100: fix buffer overrun in e100_get_regs

[Greg Kroah-Hartman]

From: Jacob Keller <jacob.e.keller@intel.com>

[ Upstream commit 51032e6f17ce990d06123ad7307f258c50d25aa7 ]

The e100_get_regs function is used to implement a simple register dump
for the e100 device. The data is broken into a couple of MAC control
registers, and then a series of PHY registers, followed by a memory dump
buffer.

The total length of the register dump is defined as (1 + E100_PHY_REGS)
* sizeof(u32) + sizeof(nic->mem->dump_buf).

The logic for filling in the PHY registers uses a convoluted inverted
count for loop which counts from E100_PHY_REGS (0x1C) down to 0, and
assigns the slots 1 + E100_PHY_REGS - i. The first loop iteration will
fill in [1] and the final loop iteration will fill in [1 + 0x1C]. This
is actually one more than the supposed number of PHY registers.

The memory dump buffer is then filled into the space at
[2 + E100_PHY_REGS] which will cause that memcpy to assign 4 bytes past
the total size.

The end result is that we overrun the total buffer size allocated by the
kernel, which could lead to a panic or other issues due to memory
corruption.

It is difficult to determine the actual total number of registers
here. The only 8255x datasheet I could find indicates there are 28 total
MDI registers. However, we're reading 29 here, and reading them in
reverse!

In addition, the ethtool e100 register dump interface appears to read
the first PHY register to determine if the device is in MDI or MDIx
mode. This doesn't appear to be documented anywhere within the 8255x
datasheet. I can only assume it must be in register 28 (the extra
register we're reading here).

Lets not change any of the intended meaning of what we copy here. Just
extend the space by 4 bytes to account for the extra register and
continue copying the data out in the same order.

Change the E100_PHY_REGS value to be the correct total (29) so that the
total register dump size is calculated properly. Fix the offset for
where we copy the dump buffer so that it doesn't overrun the total size.

Re-write the for loop to use counting up instead of the convoluted
down-counting. Correct the mdio_read offset to use the 0-based register
offsets, but maintain the bizarre reverse ordering so that we have the
ABI expected by applications like ethtool. This requires and additional
subtraction of 1. It seems a bit odd but it makes the flow of assignment
into the register buffer easier to follow.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Felicitas Hetzelt <felicitashetzelt@gmail.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/e100.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c
index abb65ed9492b..aa556e4f9051 100644
--- a/drivers/net/ethernet/intel/e100.c
+++ b/drivers/net/ethernet/intel/e100.c
@@ -2462,7 +2462,7 @@ static void e100_get_drvinfo(struct net_device *netdev,
 		sizeof(info->bus_info));
 }
 
-#define E100_PHY_REGS 0x1C
+#define E100_PHY_REGS 0x1D
 static int e100_get_regs_len(struct net_device *netdev)
 {
 	struct nic *nic = netdev_priv(netdev);
@@ -2484,14 +2484,18 @@ static void e100_get_regs(struct net_device *netdev,
 	buff[0] = ioread8(&nic->csr->scb.cmd_hi) << 24 |
 		ioread8(&nic->csr->scb.cmd_lo) << 16 |
 		ioread16(&nic->csr->scb.status);
-	for (i = E100_PHY_REGS; i >= 0; i--)
-		buff[1 + E100_PHY_REGS - i] =
-			mdio_read(netdev, nic->mii.phy_id, i);
+	for (i = 0; i < E100_PHY_REGS; i++)
+		/* Note that we read the registers in reverse order. This
+		 * ordering is the ABI apparently used by ethtool and other
+		 * applications.
+		 */
+		buff[1 + i] = mdio_read(netdev, nic->mii.phy_id,
+					E100_PHY_REGS - 1 - i);
 	memset(nic->mem->dump_buf, 0, sizeof(nic->mem->dump_buf));
 	e100_exec_cb(nic, NULL, e100_dump);
 	msleep(10);
-	memcpy(&buff[2 + E100_PHY_REGS], nic->mem->dump_buf,
-		sizeof(nic->mem->dump_buf));
+	memcpy(&buff[1 + E100_PHY_REGS], nic->mem->dump_buf,
+	       sizeof(nic->mem->dump_buf));
 }
 
 static void e100_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
-- 
2.33.0

[PATCH 4.9 41/57] ipack: ipoctal: fix stack information leak

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit a89936cce87d60766a75732a9e7e25c51164f47c upstream.

The tty driver name is used also after registering the driver and must
specifically not be allocated on the stack to avoid leaking information
to user space (or triggering an oops).

Drivers should not try to encode topology information in the tty device
name but this one snuck in through staging without anyone noticing and
another driver has since copied this malpractice.

Fixing the ABI is a separate issue, but this at least plugs the security
hole.

Fixes: ba4dc61fe8c5 ("Staging: ipack: add support for IP-OCTAL mezzanine board")
Cc: stable@vger.kernel.org      # 3.5
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210917114622.5412-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/ipack/devices/ipoctal.c |   19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

--- a/drivers/ipack/devices/ipoctal.c
+++ b/drivers/ipack/devices/ipoctal.c
@@ -269,7 +269,6 @@ static int ipoctal_inst_slot(struct ipoc
 	int res;
 	int i;
 	struct tty_driver *tty;
-	char name[20];
 	struct ipoctal_channel *channel;
 	struct ipack_region *region;
 	void __iomem *addr;
@@ -360,8 +359,11 @@ static int ipoctal_inst_slot(struct ipoc
 	/* Fill struct tty_driver with ipoctal data */
 	tty->owner = THIS_MODULE;
 	tty->driver_name = KBUILD_MODNAME;
-	sprintf(name, KBUILD_MODNAME ".%d.%d.", bus_nr, slot);
-	tty->name = name;
+	tty->name = kasprintf(GFP_KERNEL, KBUILD_MODNAME ".%d.%d.", bus_nr, slot);
+	if (!tty->name) {
+		res = -ENOMEM;
+		goto err_put_driver;
+	}
 	tty->major = 0;
 
 	tty->minor_start = 0;
@@ -377,8 +379,7 @@ static int ipoctal_inst_slot(struct ipoc
 	res = tty_register_driver(tty);
 	if (res) {
 		dev_err(&ipoctal->dev->dev, "Can't register tty driver.\n");
-		put_tty_driver(tty);
-		return res;
+		goto err_free_name;
 	}
 
 	/* Save struct tty_driver for use it when uninstalling the device */
@@ -415,6 +416,13 @@ static int ipoctal_inst_slot(struct ipoc
 				       ipoctal_irq_handler, ipoctal);
 
 	return 0;
+
+err_free_name:
+	kfree(tty->name);
+err_put_driver:
+	put_tty_driver(tty);
+
+	return res;
 }
 
 static inline int ipoctal_copy_write_buffer(struct ipoctal_channel *channel,
@@ -703,6 +711,7 @@ static void __ipoctal_remove(struct ipoc
 	}
 
 	tty_unregister_driver(ipoctal->tty_drv);
+	kfree(ipoctal->tty_drv->name);
 	put_tty_driver(ipoctal->tty_drv);
 	kfree(ipoctal);
 }

[PATCH 4.9 42/57] ipack: ipoctal: fix tty registration race

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 65c001df517a7bf9be8621b53d43c89f426ce8d6 upstream.

Make sure to set the tty class-device driver data before registering the
tty to avoid having a racing open() dereference a NULL pointer.

Fixes: 9c1d784afc6f ("Staging: ipack/devices/ipoctal: Get rid of ipoctal_list.")
Cc: stable@vger.kernel.org      # 3.7
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210917114622.5412-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/ipack/devices/ipoctal.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/ipack/devices/ipoctal.c
+++ b/drivers/ipack/devices/ipoctal.c
@@ -398,13 +398,13 @@ static int ipoctal_inst_slot(struct ipoc
 		spin_lock_init(&channel->lock);
 		channel->pointer_read = 0;
 		channel->pointer_write = 0;
-		tty_dev = tty_port_register_device(&channel->tty_port, tty, i, NULL);
+		tty_dev = tty_port_register_device_attr(&channel->tty_port, tty,
+							i, NULL, channel, NULL);
 		if (IS_ERR(tty_dev)) {
 			dev_err(&ipoctal->dev->dev, "Failed to register tty device.\n");
 			tty_port_destroy(&channel->tty_port);
 			continue;
 		}
-		dev_set_drvdata(tty_dev, channel);
 	}
 
 	/*

[PATCH 4.9 43/57] ipack: ipoctal: fix tty-registration error handling

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit cd20d59291d1790dc74248476e928f57fc455189 upstream.

Registration of the ipoctal tty devices is unlikely to fail, but if it
ever does, make sure not to deregister a never registered tty device
(and dereference a NULL pointer) when the driver is later unbound.

Fixes: 2afb41d9d30d ("Staging: ipack/devices/ipoctal: Check tty_register_device return value.")
Cc: stable@vger.kernel.org      # 3.7
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210917114622.5412-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/ipack/devices/ipoctal.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/ipack/devices/ipoctal.c
+++ b/drivers/ipack/devices/ipoctal.c
@@ -38,6 +38,7 @@ struct ipoctal_channel {
 	unsigned int			pointer_read;
 	unsigned int			pointer_write;
 	struct tty_port			tty_port;
+	bool				tty_registered;
 	union scc2698_channel __iomem	*regs;
 	union scc2698_block __iomem	*block_regs;
 	unsigned int			board_id;
@@ -402,9 +403,11 @@ static int ipoctal_inst_slot(struct ipoc
 							i, NULL, channel, NULL);
 		if (IS_ERR(tty_dev)) {
 			dev_err(&ipoctal->dev->dev, "Failed to register tty device.\n");
+			tty_port_free_xmit_buf(&channel->tty_port);
 			tty_port_destroy(&channel->tty_port);
 			continue;
 		}
+		channel->tty_registered = true;
 	}
 
 	/*
@@ -705,6 +708,10 @@ static void __ipoctal_remove(struct ipoc
 
 	for (i = 0; i < NR_CHANNELS; i++) {
 		struct ipoctal_channel *channel = &ipoctal->channel[i];
+
+		if (!channel->tty_registered)
+			continue;
+
 		tty_unregister_device(ipoctal->tty_drv, i);
 		tty_port_free_xmit_buf(&channel->tty_port);
 		tty_port_destroy(&channel->tty_port);

[PATCH 4.9 44/57] ipack: ipoctal: fix missing allocation-failure check

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 445c8132727728dc297492a7d9fc074af3e94ba3 upstream.

Add the missing error handling when allocating the transmit buffer to
avoid dereferencing a NULL pointer in write() should the allocation
ever fail.

Fixes: ba4dc61fe8c5 ("Staging: ipack: add support for IP-OCTAL mezzanine board")
Cc: stable@vger.kernel.org      # 3.5
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210917114622.5412-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/ipack/devices/ipoctal.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/ipack/devices/ipoctal.c
+++ b/drivers/ipack/devices/ipoctal.c
@@ -391,7 +391,9 @@ static int ipoctal_inst_slot(struct ipoc
 
 		channel = &ipoctal->channel[i];
 		tty_port_init(&channel->tty_port);
-		tty_port_alloc_xmit_buf(&channel->tty_port);
+		res = tty_port_alloc_xmit_buf(&channel->tty_port);
+		if (res)
+			continue;
 		channel->tty_port.ops = &ipoctal_tty_port_ops;
 
 		ipoctal_reset_stats(&channel->stats);

[PATCH 4.9 45/57] ipack: ipoctal: fix module reference leak

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit bb8a4fcb2136508224c596a7e665bdba1d7c3c27 upstream.

A reference to the carrier module was taken on every open but was only
released once when the final reference to the tty struct was dropped.

Fix this by taking the module reference and initialising the tty driver
data when installing the tty.

Fixes: 82a82340bab6 ("ipoctal: get carrier driver to avoid rmmod")
Cc: stable@vger.kernel.org      # 3.18
Cc: Federico Vaga <federico.vaga@cern.ch>
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210917114622.5412-6-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/ipack/devices/ipoctal.c |   29 +++++++++++++++++++++--------
 1 file changed, 21 insertions(+), 8 deletions(-)

--- a/drivers/ipack/devices/ipoctal.c
+++ b/drivers/ipack/devices/ipoctal.c
@@ -87,22 +87,34 @@ static int ipoctal_port_activate(struct
 	return 0;
 }
 
-static int ipoctal_open(struct tty_struct *tty, struct file *file)
+static int ipoctal_install(struct tty_driver *driver, struct tty_struct *tty)
 {
 	struct ipoctal_channel *channel = dev_get_drvdata(tty->dev);
 	struct ipoctal *ipoctal = chan_to_ipoctal(channel, tty->index);
-	int err;
-
-	tty->driver_data = channel;
+	int res;
 
 	if (!ipack_get_carrier(ipoctal->dev))
 		return -EBUSY;
 
-	err = tty_port_open(&channel->tty_port, tty, file);
-	if (err)
-		ipack_put_carrier(ipoctal->dev);
+	res = tty_standard_install(driver, tty);
+	if (res)
+		goto err_put_carrier;
+
+	tty->driver_data = channel;
+
+	return 0;
+
+err_put_carrier:
+	ipack_put_carrier(ipoctal->dev);
+
+	return res;
+}
+
+static int ipoctal_open(struct tty_struct *tty, struct file *file)
+{
+	struct ipoctal_channel *channel = tty->driver_data;
 
-	return err;
+	return tty_port_open(&channel->tty_port, tty, file);
 }
 
 static void ipoctal_reset_stats(struct ipoctal_stats *stats)
@@ -668,6 +680,7 @@ static void ipoctal_cleanup(struct tty_s
 
 static const struct tty_operations ipoctal_fops = {
 	.ioctl =		NULL,
+	.install =		ipoctal_install,
 	.open =			ipoctal_open,
 	.close =		ipoctal_close,
 	.write =		ipoctal_write_tty,

[PATCH 4.9 46/57] ext4: fix potential infinite loop in ext4_dx_readdir()

[Greg Kroah-Hartman]

From: yangerkun <yangerkun@huawei.com>

commit 42cb447410d024e9d54139ae9c21ea132a8c384c upstream.

When ext4_htree_fill_tree() fails, ext4_dx_readdir() can run into an
infinite loop since if info->last_pos != ctx->pos this will reset the
directory scan and reread the failing entry.  For example:

1. a dx_dir which has 3 block, block 0 as dx_root block, block 1/2 as
   leaf block which own the ext4_dir_entry_2
2. block 1 read ok and call_filldir which will fill the dirent and update
   the ctx->pos
3. block 2 read fail, but we has already fill some dirent, so we will
   return back to userspace will a positive return val(see ksys_getdents64)
4. the second ext4_dx_readdir will reset the world since info->last_pos
   != ctx->pos, and will also init the curr_hash which pos to block 1
5. So we will read block1 too, and once block2 still read fail, we can
   only fill one dirent because the hash of the entry in block1(besides
   the last one) won't greater than curr_hash
6. this time, we forget update last_pos too since the read for block2
   will fail, and since we has got the one entry, ksys_getdents64 can
   return success
7. Latter we will trapped in a loop with step 4~6

Cc: stable@kernel.org
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210914111415.3921954-1-yangerkun@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/dir.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/fs/ext4/dir.c
+++ b/fs/ext4/dir.c
@@ -531,7 +531,7 @@ static int ext4_dx_readdir(struct file *
 	struct dir_private_info *info = file->private_data;
 	struct inode *inode = file_inode(file);
 	struct fname *fname;
-	int	ret;
+	int ret = 0;
 
 	if (!info) {
 		info = ext4_htree_create_dir_info(file, ctx->pos);
@@ -579,7 +579,7 @@ static int ext4_dx_readdir(struct file *
 						   info->curr_minor_hash,
 						   &info->next_hash);
 			if (ret < 0)
-				return ret;
+				goto finished;
 			if (ret == 0) {
 				ctx->pos = ext4_get_htree_eof(file);
 				break;
@@ -610,7 +610,7 @@ static int ext4_dx_readdir(struct file *
 	}
 finished:
 	info->last_pos = ctx->pos;
-	return 0;
+	return ret < 0 ? ret : 0;
 }
 
 static int ext4_dir_open(struct inode * inode, struct file * filp)

[PATCH 4.9 47/57] net: udp: annotate data race around udp_sk(sk)->corkflag

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

commit a9f5970767d11eadc805d5283f202612c7ba1f59 upstream.

up->corkflag field can be read or written without any lock.
Annotate accesses to avoid possible syzbot/KCSAN reports.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/udp.c |   10 +++++-----
 net/ipv6/udp.c |    2 +-
 2 files changed, 6 insertions(+), 6 deletions(-)

--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -886,7 +886,7 @@ int udp_sendmsg(struct sock *sk, struct
 	__be16 dport;
 	u8  tos;
 	int err, is_udplite = IS_UDPLITE(sk);
-	int corkreq = up->corkflag || msg->msg_flags&MSG_MORE;
+	int corkreq = READ_ONCE(up->corkflag) || msg->msg_flags&MSG_MORE;
 	int (*getfrag)(void *, char *, int, int, int, struct sk_buff *);
 	struct sk_buff *skb;
 	struct ip_options_data opt_copy;
@@ -1167,7 +1167,7 @@ int udp_sendpage(struct sock *sk, struct
 	}
 
 	up->len += size;
-	if (!(up->corkflag || (flags&MSG_MORE)))
+	if (!(READ_ONCE(up->corkflag) || (flags&MSG_MORE)))
 		ret = udp_push_pending_frames(sk);
 	if (!ret)
 		ret = size;
@@ -2034,9 +2034,9 @@ int udp_lib_setsockopt(struct sock *sk,
 	switch (optname) {
 	case UDP_CORK:
 		if (val != 0) {
-			up->corkflag = 1;
+			WRITE_ONCE(up->corkflag, 1);
 		} else {
-			up->corkflag = 0;
+			WRITE_ONCE(up->corkflag, 0);
 			lock_sock(sk);
 			push_pending_frames(sk);
 			release_sock(sk);
@@ -2143,7 +2143,7 @@ int udp_lib_getsockopt(struct sock *sk,
 
 	switch (optname) {
 	case UDP_CORK:
-		val = up->corkflag;
+		val = READ_ONCE(up->corkflag);
 		break;
 
 	case UDP_ENCAP:
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -1028,7 +1028,7 @@ int udpv6_sendmsg(struct sock *sk, struc
 	struct ipcm6_cookie ipc6;
 	int addr_len = msg->msg_namelen;
 	int ulen = len;
-	int corkreq = up->corkflag || msg->msg_flags&MSG_MORE;
+	int corkreq = READ_ONCE(up->corkflag) || msg->msg_flags&MSG_MORE;
 	int err;
 	int connected = 0;
 	int is_udplite = IS_UDPLITE(sk);

[PATCH 4.9 48/57] EDAC/synopsys: Fix wrong value type assignment for edac_mode

[Greg Kroah-Hartman]

From: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>

commit 5297cfa6bdf93e3889f78f9b482e2a595a376083 upstream.

dimm->edac_mode contains values of type enum edac_type - not the
corresponding capability flags. Fix that.

Issue caught by Coverity check "enumerated type mixed with another
type."

 [ bp: Rewrite commit message, add tags. ]

Fixes: ae9b56e3996d ("EDAC, synps: Add EDAC support for zynq ddr ecc controller")
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20210818072315.15149-1-shubhrajyoti.datta@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/edac/synopsys_edac.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -371,7 +371,7 @@ static int synps_edac_init_csrows(struct
 
 		for (j = 0; j < csi->nr_channels; j++) {
 			dimm            = csi->channels[j]->dimm;
-			dimm->edac_mode = EDAC_FLAG_SECDED;
+			dimm->edac_mode = EDAC_SECDED;
 			dimm->mtype     = synps_edac_get_mtype(priv->baseaddr);
 			dimm->nr_pages  = (size >> PAGE_SHIFT) / csi->nr_channels;
 			dimm->grain     = SYNPS_EDAC_ERR_GRAIN;

[PATCH 4.9 49/57] ARM: 9077/1: PLT: Move struct plt_entries definition to header

[Greg Kroah-Hartman]

From: Alex Sverdlin <alexander.sverdlin@nokia.com>

commit 4e271701c17dee70c6e1351c4d7d42e70405c6a9 upstream

No functional change, later it will be re-used in several files.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/include/asm/module.h |    9 +++++++++
 arch/arm/kernel/module-plts.c |    9 ---------
 2 files changed, 9 insertions(+), 9 deletions(-)

--- a/arch/arm/include/asm/module.h
+++ b/arch/arm/include/asm/module.h
@@ -18,6 +18,15 @@ enum {
 };
 #endif
 
+#define PLT_ENT_STRIDE		L1_CACHE_BYTES
+#define PLT_ENT_COUNT		(PLT_ENT_STRIDE / sizeof(u32))
+#define PLT_ENT_SIZE		(sizeof(struct plt_entries) / PLT_ENT_COUNT)
+
+struct plt_entries {
+	u32	ldr[PLT_ENT_COUNT];
+	u32	lit[PLT_ENT_COUNT];
+};
+
 struct mod_plt_sec {
 	struct elf32_shdr	*plt;
 	int			plt_count;
--- a/arch/arm/kernel/module-plts.c
+++ b/arch/arm/kernel/module-plts.c
@@ -14,10 +14,6 @@
 #include <asm/cache.h>
 #include <asm/opcodes.h>
 
-#define PLT_ENT_STRIDE		L1_CACHE_BYTES
-#define PLT_ENT_COUNT		(PLT_ENT_STRIDE / sizeof(u32))
-#define PLT_ENT_SIZE		(sizeof(struct plt_entries) / PLT_ENT_COUNT)
-
 #ifdef CONFIG_THUMB2_KERNEL
 #define PLT_ENT_LDR		__opcode_to_mem_thumb32(0xf8dff000 | \
 							(PLT_ENT_STRIDE - 4))
@@ -26,11 +22,6 @@
 						    (PLT_ENT_STRIDE - 8))
 #endif
 
-struct plt_entries {
-	u32	ldr[PLT_ENT_COUNT];
-	u32	lit[PLT_ENT_COUNT];
-};
-
 static bool in_init(const struct module *mod, unsigned long loc)
 {
 	return loc - (u32)mod->init_layout.base < mod->init_layout.size;

[PATCH 4.9 50/57] ARM: 9078/1: Add warn suppress parameter to arm_gen_branch_link()

[Greg Kroah-Hartman]

From: Alex Sverdlin <alexander.sverdlin@nokia.com>

commit 890cb057a46d323fd8c77ebecb6485476614cd21 upstream

Will be used in the following patch. No functional change.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/include/asm/insn.h |    8 ++++----
 arch/arm/kernel/ftrace.c    |    2 +-
 arch/arm/kernel/insn.c      |   19 ++++++++++---------
 3 files changed, 15 insertions(+), 14 deletions(-)

--- a/arch/arm/include/asm/insn.h
+++ b/arch/arm/include/asm/insn.h
@@ -12,18 +12,18 @@ arm_gen_nop(void)
 }
 
 unsigned long
-__arm_gen_branch(unsigned long pc, unsigned long addr, bool link);
+__arm_gen_branch(unsigned long pc, unsigned long addr, bool link, bool warn);
 
 static inline unsigned long
 arm_gen_branch(unsigned long pc, unsigned long addr)
 {
-	return __arm_gen_branch(pc, addr, false);
+	return __arm_gen_branch(pc, addr, false, true);
 }
 
 static inline unsigned long
-arm_gen_branch_link(unsigned long pc, unsigned long addr)
+arm_gen_branch_link(unsigned long pc, unsigned long addr, bool warn)
 {
-	return __arm_gen_branch(pc, addr, true);
+	return __arm_gen_branch(pc, addr, true, warn);
 }
 
 #endif
--- a/arch/arm/kernel/ftrace.c
+++ b/arch/arm/kernel/ftrace.c
@@ -97,7 +97,7 @@ int ftrace_arch_code_modify_post_process
 
 static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr)
 {
-	return arm_gen_branch_link(pc, addr);
+	return arm_gen_branch_link(pc, addr, true);
 }
 
 static int ftrace_modify_code(unsigned long pc, unsigned long old,
--- a/arch/arm/kernel/insn.c
+++ b/arch/arm/kernel/insn.c
@@ -2,8 +2,9 @@
 #include <linux/kernel.h>
 #include <asm/opcodes.h>
 
-static unsigned long
-__arm_gen_branch_thumb2(unsigned long pc, unsigned long addr, bool link)
+static unsigned long __arm_gen_branch_thumb2(unsigned long pc,
+					     unsigned long addr, bool link,
+					     bool warn)
 {
 	unsigned long s, j1, j2, i1, i2, imm10, imm11;
 	unsigned long first, second;
@@ -11,7 +12,7 @@ __arm_gen_branch_thumb2(unsigned long pc
 
 	offset = (long)addr - (long)(pc + 4);
 	if (offset < -16777216 || offset > 16777214) {
-		WARN_ON_ONCE(1);
+		WARN_ON_ONCE(warn);
 		return 0;
 	}
 
@@ -32,8 +33,8 @@ __arm_gen_branch_thumb2(unsigned long pc
 	return __opcode_thumb32_compose(first, second);
 }
 
-static unsigned long
-__arm_gen_branch_arm(unsigned long pc, unsigned long addr, bool link)
+static unsigned long __arm_gen_branch_arm(unsigned long pc, unsigned long addr,
+					  bool link, bool warn)
 {
 	unsigned long opcode = 0xea000000;
 	long offset;
@@ -43,7 +44,7 @@ __arm_gen_branch_arm(unsigned long pc, u
 
 	offset = (long)addr - (long)(pc + 8);
 	if (unlikely(offset < -33554432 || offset > 33554428)) {
-		WARN_ON_ONCE(1);
+		WARN_ON_ONCE(warn);
 		return 0;
 	}
 
@@ -53,10 +54,10 @@ __arm_gen_branch_arm(unsigned long pc, u
 }
 
 unsigned long
-__arm_gen_branch(unsigned long pc, unsigned long addr, bool link)
+__arm_gen_branch(unsigned long pc, unsigned long addr, bool link, bool warn)
 {
 	if (IS_ENABLED(CONFIG_THUMB2_KERNEL))
-		return __arm_gen_branch_thumb2(pc, addr, link);
+		return __arm_gen_branch_thumb2(pc, addr, link, warn);
 	else
-		return __arm_gen_branch_arm(pc, addr, link);
+		return __arm_gen_branch_arm(pc, addr, link, warn);
 }

[PATCH 4.9 51/57] ARM: 9079/1: ftrace: Add MODULE_PLTS support

[Greg Kroah-Hartman]

From: Alex Sverdlin <alexander.sverdlin@nokia.com>

commit 79f32b221b18c15a98507b101ef4beb52444cc6f upstream

Teach ftrace_make_call() and ftrace_make_nop() about PLTs.
Teach PLT code about FTRACE and all its callbacks.
Otherwise the following might happen:

------------[ cut here ]------------
WARNING: CPU: 14 PID: 2265 at .../arch/arm/kernel/insn.c:14 __arm_gen_branch+0x83/0x8c()
...
Hardware name: LSI Axxia AXM55XX
[<c0314a49>] (unwind_backtrace) from [<c03115e9>] (show_stack+0x11/0x14)
[<c03115e9>] (show_stack) from [<c0519f51>] (dump_stack+0x81/0xa8)
[<c0519f51>] (dump_stack) from [<c032185d>] (warn_slowpath_common+0x69/0x90)
[<c032185d>] (warn_slowpath_common) from [<c03218f3>] (warn_slowpath_null+0x17/0x1c)
[<c03218f3>] (warn_slowpath_null) from [<c03143cf>] (__arm_gen_branch+0x83/0x8c)
[<c03143cf>] (__arm_gen_branch) from [<c0314337>] (ftrace_make_nop+0xf/0x24)
[<c0314337>] (ftrace_make_nop) from [<c038ebcb>] (ftrace_process_locs+0x27b/0x3e8)
[<c038ebcb>] (ftrace_process_locs) from [<c0378d79>] (load_module+0x11e9/0x1a44)
[<c0378d79>] (load_module) from [<c037974d>] (SyS_finit_module+0x59/0x84)
[<c037974d>] (SyS_finit_module) from [<c030e981>] (ret_fast_syscall+0x1/0x18)
---[ end trace e1b64ced7a89adcc ]---
------------[ cut here ]------------
WARNING: CPU: 14 PID: 2265 at .../kernel/trace/ftrace.c:1979 ftrace_bug+0x1b1/0x234()
...
Hardware name: LSI Axxia AXM55XX
[<c0314a49>] (unwind_backtrace) from [<c03115e9>] (show_stack+0x11/0x14)
[<c03115e9>] (show_stack) from [<c0519f51>] (dump_stack+0x81/0xa8)
[<c0519f51>] (dump_stack) from [<c032185d>] (warn_slowpath_common+0x69/0x90)
[<c032185d>] (warn_slowpath_common) from [<c03218f3>] (warn_slowpath_null+0x17/0x1c)
[<c03218f3>] (warn_slowpath_null) from [<c038e87d>] (ftrace_bug+0x1b1/0x234)
[<c038e87d>] (ftrace_bug) from [<c038ebd5>] (ftrace_process_locs+0x285/0x3e8)
[<c038ebd5>] (ftrace_process_locs) from [<c0378d79>] (load_module+0x11e9/0x1a44)
[<c0378d79>] (load_module) from [<c037974d>] (SyS_finit_module+0x59/0x84)
[<c037974d>] (SyS_finit_module) from [<c030e981>] (ret_fast_syscall+0x1/0x18)
---[ end trace e1b64ced7a89adcd ]---
ftrace failed to modify [<e9ef7006>] 0xe9ef7006
actual: 02:f0:3b:fa
ftrace record flags: 0
(0) expected tramp: c0314265

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/include/asm/ftrace.h |    3 ++
 arch/arm/include/asm/module.h |    1 
 arch/arm/kernel/ftrace.c      |   45 +++++++++++++++++++++++++++++++++++-------
 arch/arm/kernel/module-plts.c |   44 +++++++++++++++++++++++++++++++++++++----
 4 files changed, 82 insertions(+), 11 deletions(-)

--- a/arch/arm/include/asm/ftrace.h
+++ b/arch/arm/include/asm/ftrace.h
@@ -14,6 +14,9 @@ struct dyn_arch_ftrace {
 #ifdef CONFIG_OLD_MCOUNT
 	bool	old_mcount;
 #endif
+#ifdef CONFIG_ARM_MODULE_PLTS
+	struct module *mod;
+#endif
 };
 
 static inline unsigned long ftrace_call_adjust(unsigned long addr)
--- a/arch/arm/include/asm/module.h
+++ b/arch/arm/include/asm/module.h
@@ -29,6 +29,7 @@ struct plt_entries {
 
 struct mod_plt_sec {
 	struct elf32_shdr	*plt;
+	struct plt_entries	*plt_ent;
 	int			plt_count;
 };
 
--- a/arch/arm/kernel/ftrace.c
+++ b/arch/arm/kernel/ftrace.c
@@ -95,9 +95,10 @@ int ftrace_arch_code_modify_post_process
 	return 0;
 }
 
-static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr)
+static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr,
+					 bool warn)
 {
-	return arm_gen_branch_link(pc, addr, true);
+	return arm_gen_branch_link(pc, addr, warn);
 }
 
 static int ftrace_modify_code(unsigned long pc, unsigned long old,
@@ -136,14 +137,14 @@ int ftrace_update_ftrace_func(ftrace_fun
 	int ret;
 
 	pc = (unsigned long)&ftrace_call;
-	new = ftrace_call_replace(pc, (unsigned long)func);
+	new = ftrace_call_replace(pc, (unsigned long)func, true);
 
 	ret = ftrace_modify_code(pc, 0, new, false);
 
 #ifdef CONFIG_OLD_MCOUNT
 	if (!ret) {
 		pc = (unsigned long)&ftrace_call_old;
-		new = ftrace_call_replace(pc, (unsigned long)func);
+		new = ftrace_call_replace(pc, (unsigned long)func, true);
 
 		ret = ftrace_modify_code(pc, 0, new, false);
 	}
@@ -156,9 +157,21 @@ int ftrace_make_call(struct dyn_ftrace *
 {
 	unsigned long new, old;
 	unsigned long ip = rec->ip;
+	unsigned long aaddr = adjust_address(rec, addr);
+	struct module *mod = NULL;
+
+#ifdef CONFIG_ARM_MODULE_PLTS
+	mod = rec->arch.mod;
+#endif
 
 	old = ftrace_nop_replace(rec);
-	new = ftrace_call_replace(ip, adjust_address(rec, addr));
+	new = ftrace_call_replace(ip, aaddr, !mod);
+#ifdef CONFIG_ARM_MODULE_PLTS
+	if (!new && mod) {
+		aaddr = get_module_plt(mod, ip, aaddr);
+		new = ftrace_call_replace(ip, aaddr, true);
+	}
+#endif
 
 	return ftrace_modify_code(rec->ip, old, new, true);
 }
@@ -166,12 +179,29 @@ int ftrace_make_call(struct dyn_ftrace *
 int ftrace_make_nop(struct module *mod,
 		    struct dyn_ftrace *rec, unsigned long addr)
 {
+	unsigned long aaddr = adjust_address(rec, addr);
 	unsigned long ip = rec->ip;
 	unsigned long old;
 	unsigned long new;
 	int ret;
 
-	old = ftrace_call_replace(ip, adjust_address(rec, addr));
+#ifdef CONFIG_ARM_MODULE_PLTS
+	/* mod is only supplied during module loading */
+	if (!mod)
+		mod = rec->arch.mod;
+	else
+		rec->arch.mod = mod;
+#endif
+
+	old = ftrace_call_replace(ip, aaddr,
+				  !IS_ENABLED(CONFIG_ARM_MODULE_PLTS) || !mod);
+#ifdef CONFIG_ARM_MODULE_PLTS
+	if (!old && mod) {
+		aaddr = get_module_plt(mod, ip, aaddr);
+		old = ftrace_call_replace(ip, aaddr, true);
+	}
+#endif
+
 	new = ftrace_nop_replace(rec);
 	ret = ftrace_modify_code(ip, old, new, true);
 
@@ -179,7 +209,8 @@ int ftrace_make_nop(struct module *mod,
 	if (ret == -EINVAL && addr == MCOUNT_ADDR) {
 		rec->arch.old_mcount = true;
 
-		old = ftrace_call_replace(ip, adjust_address(rec, addr));
+		old = ftrace_call_replace(ip, adjust_address(rec, addr),
+					  !IS_ENABLED(CONFIG_ARM_MODULE_PLTS) || !mod);
 		new = ftrace_nop_replace(rec);
 		ret = ftrace_modify_code(ip, old, new, true);
 	}
--- a/arch/arm/kernel/module-plts.c
+++ b/arch/arm/kernel/module-plts.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/elf.h>
+#include <linux/ftrace.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/sort.h>
@@ -22,19 +23,52 @@
 						    (PLT_ENT_STRIDE - 8))
 #endif
 
+static const u32 fixed_plts[] = {
+#ifdef CONFIG_FUNCTION_TRACER
+	FTRACE_ADDR,
+	MCOUNT_ADDR,
+#endif
+};
+
 static bool in_init(const struct module *mod, unsigned long loc)
 {
 	return loc - (u32)mod->init_layout.base < mod->init_layout.size;
 }
 
+static void prealloc_fixed(struct mod_plt_sec *pltsec, struct plt_entries *plt)
+{
+	int i;
+
+	if (!ARRAY_SIZE(fixed_plts) || pltsec->plt_count)
+		return;
+	pltsec->plt_count = ARRAY_SIZE(fixed_plts);
+
+	for (i = 0; i < ARRAY_SIZE(plt->ldr); ++i)
+		plt->ldr[i] = PLT_ENT_LDR;
+
+	BUILD_BUG_ON(sizeof(fixed_plts) > sizeof(plt->lit));
+	memcpy(plt->lit, fixed_plts, sizeof(fixed_plts));
+}
+
 u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val)
 {
 	struct mod_plt_sec *pltsec = !in_init(mod, loc) ? &mod->arch.core :
 							  &mod->arch.init;
+	struct plt_entries *plt;
+	int idx;
+
+	/* cache the address, ELF header is available only during module load */
+	if (!pltsec->plt_ent)
+		pltsec->plt_ent = (struct plt_entries *)pltsec->plt->sh_addr;
+	plt = pltsec->plt_ent;
 
-	struct plt_entries *plt = (struct plt_entries *)pltsec->plt->sh_addr;
-	int idx = 0;
+	prealloc_fixed(pltsec, plt);
+
+	for (idx = 0; idx < ARRAY_SIZE(fixed_plts); ++idx)
+		if (plt->lit[idx] == val)
+			return (u32)&plt->ldr[idx];
 
+	idx = 0;
 	/*
 	 * Look for an existing entry pointing to 'val'. Given that the
 	 * relocations are sorted, this will be the last entry we allocated.
@@ -182,8 +216,8 @@ static unsigned int count_plts(const Elf
 int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
 			      char *secstrings, struct module *mod)
 {
-	unsigned long core_plts = 0;
-	unsigned long init_plts = 0;
+	unsigned long core_plts = ARRAY_SIZE(fixed_plts);
+	unsigned long init_plts = ARRAY_SIZE(fixed_plts);
 	Elf32_Shdr *s, *sechdrs_end = sechdrs + ehdr->e_shnum;
 	Elf32_Sym *syms = NULL;
 
@@ -238,6 +272,7 @@ int module_frob_arch_sections(Elf_Ehdr *
 	mod->arch.core.plt->sh_size = round_up(core_plts * PLT_ENT_SIZE,
 					       sizeof(struct plt_entries));
 	mod->arch.core.plt_count = 0;
+	mod->arch.core.plt_ent = NULL;
 
 	mod->arch.init.plt->sh_type = SHT_NOBITS;
 	mod->arch.init.plt->sh_flags = SHF_EXECINSTR | SHF_ALLOC;
@@ -245,6 +280,7 @@ int module_frob_arch_sections(Elf_Ehdr *
 	mod->arch.init.plt->sh_size = round_up(init_plts * PLT_ENT_SIZE,
 					       sizeof(struct plt_entries));
 	mod->arch.init.plt_count = 0;
+	mod->arch.init.plt_ent = NULL;
 
 	pr_debug("%s: plt=%x, init.plt=%x\n", __func__,
 		 mod->arch.core.plt->sh_size, mod->arch.init.plt->sh_size);

[PATCH 4.9 52/57] ARM: 9098/1: ftrace: MODULE_PLT: Fix build problem without DYNAMIC_FTRACE

[Greg Kroah-Hartman]

From: Alex Sverdlin <alexander.sverdlin@nokia.com>

commit 6fa630bf473827aee48cbf0efbbdf6f03134e890 upstream

FTRACE_ADDR is only defined when CONFIG_DYNAMIC_FTRACE is defined, the
latter is even stronger requirement than CONFIG_FUNCTION_TRACER (which is
enough for MCOUNT_ADDR).

Link: https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org/thread/ZUVCQBHDMFVR7CCB7JPESLJEWERZDJ3T/

Fixes: 1f12fb25c5c5d22f ("ARM: 9079/1: ftrace: Add MODULE_PLTS support")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/kernel/module-plts.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/kernel/module-plts.c
+++ b/arch/arm/kernel/module-plts.c
@@ -24,7 +24,7 @@
 #endif
 
 static const u32 fixed_plts[] = {
-#ifdef CONFIG_FUNCTION_TRACER
+#ifdef CONFIG_DYNAMIC_FTRACE
 	FTRACE_ADDR,
 	MCOUNT_ADDR,
 #endif

[PATCH 4.9 53/57] arm64: Extend workaround for erratum 1024718 to all versions of Cortex-A55

[Greg Kroah-Hartman]

From: Suzuki K Poulose <suzuki.poulose@arm.com>

commit c0b15c25d25171db4b70cc0b7dbc1130ee94017d upstream.

The erratum 1024718 affects Cortex-A55 r0p0 to r2p0. However
we apply the work around for r0p0 - r1p0. Unfortunately this
won't be fixed for the future revisions for the CPU. Thus
extend the work around for all versions of A55, to cover
for r2p0 and any future revisions.

Cc: stable@vger.kernel.org
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210203230057.3961239-1-suzuki.poulose@arm.com
[will: Update Kconfig help text]
Signed-off-by: Will Deacon <will@kernel.org>
[Nanyon: adjust for stable version below v4.16, which set TCR_HD earlier
in assembly code]
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/Kconfig   |    2 +-
 arch/arm64/mm/proc.S |    4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -433,7 +433,7 @@ config ARM64_ERRATUM_1024718
 	help
 	  This option adds work around for Arm Cortex-A55 Erratum 1024718.
 
-	  Affected Cortex-A55 cores (r0p0, r0p1, r1p0) could cause incorrect
+	  Affected Cortex-A55 cores (all revisions) could cause incorrect
 	  update of the hardware dirty bit when the DBM/AP bits are updated
 	  without a break-before-make. The work around is to disable the usage
 	  of hardware DBM locally on the affected cores. CPUs not affected by
--- a/arch/arm64/mm/proc.S
+++ b/arch/arm64/mm/proc.S
@@ -442,8 +442,8 @@ ENTRY(__cpu_setup)
 	cmp	x9, #2
 	b.lt	1f
 #ifdef CONFIG_ARM64_ERRATUM_1024718
-	/* Disable hardware DBM on Cortex-A55 r0p0, r0p1 & r1p0 */
-	cpu_midr_match MIDR_CORTEX_A55, MIDR_CPU_VAR_REV(0, 0), MIDR_CPU_VAR_REV(1, 0), x1, x2, x3, x4
+	/* Disable hardware DBM on Cortex-A55 all versions */
+	cpu_midr_match MIDR_CORTEX_A55, MIDR_CPU_VAR_REV(0, 0), MIDR_CPU_VAR_REV(0xf, 0xf), x1, x2, x3, x4
 	cbnz	x1, 1f
 #endif
 	orr	x10, x10, #TCR_HD		// hardware Dirty flag update

[PATCH 4.9 54/57] HID: betop: fix slab-out-of-bounds Write in betop_probe

[Greg Kroah-Hartman]

From: F.A.Sulaiman <asha.16@itfac.mrt.ac.lk>

commit 1e4ce418b1cb1a810256b5fb3fd33d22d1325993 upstream.

Syzbot reported slab-out-of-bounds Write bug in hid-betopff driver.
The problem is the driver assumes the device must have an input report but
some malicious devices violate this assumption.

So this patch checks hid_device's input is non empty before it's been used.

Reported-by: syzbot+07efed3bc5a1407bd742@syzkaller.appspotmail.com
Signed-off-by: F.A. SULAIMAN <asha.16@itfac.mrt.ac.lk>
Reviewed-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hid/hid-betopff.c |   13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

--- a/drivers/hid/hid-betopff.c
+++ b/drivers/hid/hid-betopff.c
@@ -59,15 +59,22 @@ static int betopff_init(struct hid_devic
 {
 	struct betopff_device *betopff;
 	struct hid_report *report;
-	struct hid_input *hidinput =
-			list_first_entry(&hid->inputs, struct hid_input, list);
+	struct hid_input *hidinput;
 	struct list_head *report_list =
 			&hid->report_enum[HID_OUTPUT_REPORT].report_list;
-	struct input_dev *dev = hidinput->input;
+	struct input_dev *dev;
 	int field_count = 0;
 	int error;
 	int i, j;
 
+	if (list_empty(&hid->inputs)) {
+		hid_err(hid, "no inputs found\n");
+		return -ENODEV;
+	}
+
+	hidinput = list_first_entry(&hid->inputs, struct hid_input, list);
+	dev = hidinput->input;
+
 	if (list_empty(report_list)) {
 		hid_err(hid, "no output reports found\n");
 		return -ENODEV;

[PATCH 4.9 55/57] netfilter: ipset: Fix oversized kvmalloc() calls

[Greg Kroah-Hartman]

From: Jozsef Kadlecsik <kadlec@netfilter.org>

commit 7bbc3d385bd813077acaf0e6fdb2a86a901f5382 upstream.

The commit

commit 7661809d493b426e979f39ab512e3adf41fbcc69
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date:   Wed Jul 14 09:45:49 2021 -0700

    mm: don't allow oversized kvmalloc() calls

limits the max allocatable memory via kvmalloc() to MAX_INT. Apply the
same limit in ipset.

Reported-by: syzbot+3493b1873fb3ea827986@syzkaller.appspotmail.com
Reported-by: syzbot+2b8443c35458a617c904@syzkaller.appspotmail.com
Reported-by: syzbot+ee5cb15f4a0e85e0d54e@syzkaller.appspotmail.com
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netfilter/ipset/ip_set_hash_gen.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/net/netfilter/ipset/ip_set_hash_gen.h
+++ b/net/netfilter/ipset/ip_set_hash_gen.h
@@ -102,11 +102,11 @@ htable_size(u8 hbits)
 {
 	size_t hsize;
 
-	/* We must fit both into u32 in jhash and size_t */
+	/* We must fit both into u32 in jhash and INT_MAX in kvmalloc_node() */
 	if (hbits > 31)
 		return 0;
 	hsize = jhash_size(hbits);
-	if ((((size_t)-1) - sizeof(struct htable)) / sizeof(struct hbucket *)
+	if ((INT_MAX - sizeof(struct htable)) / sizeof(struct hbucket *)
 	    < hsize)
 		return 0;
 

[PATCH 4.9 56/57] HID: usbhid: free raw_report buffers in usbhid_stop

[Greg Kroah-Hartman]

From: Anirudh Rayabharam <mail@anirudhrb.com>

commit f7744fa16b96da57187dc8e5634152d3b63d72de upstream.

Free the unsent raw_report buffers when the device is removed.

Fixes a memory leak reported by syzbot at:
https://syzkaller.appspot.com/bug?id=7b4fa7cb1a7c2d3342a2a8a6c53371c8c418ab47

Reported-by: syzbot+47b26cd837ececfc666d@syzkaller.appspotmail.com
Tested-by: syzbot+47b26cd837ececfc666d@syzkaller.appspotmail.com
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hid/usbhid/hid-core.c |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -500,7 +500,7 @@ static void hid_ctrl(struct urb *urb)
 
 	if (unplug) {
 		usbhid->ctrltail = usbhid->ctrlhead;
-	} else {
+	} else if (usbhid->ctrlhead != usbhid->ctrltail) {
 		usbhid->ctrltail = (usbhid->ctrltail + 1) & (HID_CONTROL_FIFO_SIZE - 1);
 
 		if (usbhid->ctrlhead != usbhid->ctrltail &&
@@ -1185,9 +1185,20 @@ static void usbhid_stop(struct hid_devic
 		usbhid->intf->needs_remote_wakeup = 0;
 
 	clear_bit(HID_STARTED, &usbhid->iofl);
+
 	spin_lock_irq(&usbhid->lock);	/* Sync with error and led handlers */
 	set_bit(HID_DISCONNECTED, &usbhid->iofl);
+	while (usbhid->ctrltail != usbhid->ctrlhead) {
+		if (usbhid->ctrl[usbhid->ctrltail].dir == USB_DIR_OUT) {
+			kfree(usbhid->ctrl[usbhid->ctrltail].raw_report);
+			usbhid->ctrl[usbhid->ctrltail].raw_report = NULL;
+		}
+
+		usbhid->ctrltail = (usbhid->ctrltail + 1) &
+			(HID_CONTROL_FIFO_SIZE - 1);
+	}
 	spin_unlock_irq(&usbhid->lock);
+
 	usb_kill_urb(usbhid->urbin);
 	usb_kill_urb(usbhid->urbout);
 	usb_kill_urb(usbhid->urbctrl);

[PATCH 4.9 57/57] net: mdiobus: Fix memory leak in __mdiobus_register

[Greg Kroah-Hartman]

From: Yanfei Xu <yanfei.xu@windriver.com>

commit ab609f25d19858513919369ff3d9a63c02cd9e2e upstream.

Once device_register() failed, we should call put_device() to
decrement reference count for cleanup. Or it will cause memory
leak.

BUG: memory leak
unreferenced object 0xffff888114032e00 (size 256):
  comm "kworker/1:3", pid 2960, jiffies 4294943572 (age 15.920s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 08 2e 03 14 81 88 ff ff  ................
    08 2e 03 14 81 88 ff ff 90 76 65 82 ff ff ff ff  .........ve.....
  backtrace:
    [<ffffffff8265cfab>] kmalloc include/linux/slab.h:591 [inline]
    [<ffffffff8265cfab>] kzalloc include/linux/slab.h:721 [inline]
    [<ffffffff8265cfab>] device_private_init drivers/base/core.c:3203 [inline]
    [<ffffffff8265cfab>] device_add+0x89b/0xdf0 drivers/base/core.c:3253
    [<ffffffff828dd643>] __mdiobus_register+0xc3/0x450 drivers/net/phy/mdio_bus.c:537
    [<ffffffff828cb835>] __devm_mdiobus_register+0x75/0xf0 drivers/net/phy/mdio_devres.c:87
    [<ffffffff82b92a00>] ax88772_init_mdio drivers/net/usb/asix_devices.c:676 [inline]
    [<ffffffff82b92a00>] ax88772_bind+0x330/0x480 drivers/net/usb/asix_devices.c:786
    [<ffffffff82baa33f>] usbnet_probe+0x3ff/0xdf0 drivers/net/usb/usbnet.c:1745
    [<ffffffff82c36e17>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
    [<ffffffff82661d17>] call_driver_probe drivers/base/dd.c:517 [inline]
    [<ffffffff82661d17>] really_probe.part.0+0xe7/0x380 drivers/base/dd.c:596
    [<ffffffff826620bc>] really_probe drivers/base/dd.c:558 [inline]
    [<ffffffff826620bc>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:751
    [<ffffffff826621ba>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:781
    [<ffffffff82662a26>] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:898
    [<ffffffff8265eca7>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427
    [<ffffffff826625a2>] __device_attach+0x122/0x260 drivers/base/dd.c:969
    [<ffffffff82660916>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:487
    [<ffffffff8265cd0b>] device_add+0x5fb/0xdf0 drivers/base/core.c:3359
    [<ffffffff82c343b9>] usb_set_configuration+0x9d9/0xb90 drivers/usb/core/message.c:2170
    [<ffffffff82c4473c>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238

BUG: memory leak
unreferenced object 0xffff888116f06900 (size 32):
  comm "kworker/0:2", pid 2670, jiffies 4294944448 (age 7.160s)
  hex dump (first 32 bytes):
    75 73 62 2d 30 30 31 3a 30 30 33 00 00 00 00 00  usb-001:003.....
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff81484516>] kstrdup+0x36/0x70 mm/util.c:60
    [<ffffffff814845a3>] kstrdup_const+0x53/0x80 mm/util.c:83
    [<ffffffff82296ba2>] kvasprintf_const+0xc2/0x110 lib/kasprintf.c:48
    [<ffffffff82358d4b>] kobject_set_name_vargs+0x3b/0xe0 lib/kobject.c:289
    [<ffffffff826575f3>] dev_set_name+0x63/0x90 drivers/base/core.c:3147
    [<ffffffff828dd63b>] __mdiobus_register+0xbb/0x450 drivers/net/phy/mdio_bus.c:535
    [<ffffffff828cb835>] __devm_mdiobus_register+0x75/0xf0 drivers/net/phy/mdio_devres.c:87
    [<ffffffff82b92a00>] ax88772_init_mdio drivers/net/usb/asix_devices.c:676 [inline]
    [<ffffffff82b92a00>] ax88772_bind+0x330/0x480 drivers/net/usb/asix_devices.c:786
    [<ffffffff82baa33f>] usbnet_probe+0x3ff/0xdf0 drivers/net/usb/usbnet.c:1745
    [<ffffffff82c36e17>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
    [<ffffffff82661d17>] call_driver_probe drivers/base/dd.c:517 [inline]
    [<ffffffff82661d17>] really_probe.part.0+0xe7/0x380 drivers/base/dd.c:596
    [<ffffffff826620bc>] really_probe drivers/base/dd.c:558 [inline]
    [<ffffffff826620bc>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:751
    [<ffffffff826621ba>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:781
    [<ffffffff82662a26>] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:898
    [<ffffffff8265eca7>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427
    [<ffffffff826625a2>] __device_attach+0x122/0x260 drivers/base/dd.c:969

Reported-by: syzbot+398e7dc692ddbbb4cfec@syzkaller.appspotmail.com
Signed-off-by: Yanfei Xu <yanfei.xu@windriver.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/phy/mdio_bus.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -319,6 +319,7 @@ int __mdiobus_register(struct mii_bus *b
 	err = device_register(&bus->dev);
 	if (err) {
 		pr_err("mii_bus %s failed to register\n", bus->id);
+		put_device(&bus->dev);
 		return -EINVAL;
 	}
 

Re: [PATCH 4.9 00/57] 4.9.285-rc1 review

[Shuah Khan]

On 10/4/21 6:51 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.285 release.
> There are 57 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 06 Oct 2021 12:50:17 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.285-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 4.9 57/57] net: mdiobus: Fix memory leak in __mdiobus_register

[Florian Fainelli]

On 10/4/21 5:52 AM, Greg Kroah-Hartman wrote:
> From: Yanfei Xu <yanfei.xu@windriver.com>
> 
> commit ab609f25d19858513919369ff3d9a63c02cd9e2e upstream.
> 
> Once device_register() failed, we should call put_device() to
> decrement reference count for cleanup. Or it will cause memory
> leak.

This changed has since been reverted upstream, please drop this change:

https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/commit/?id=10eff1f5788b6ffac212c254e2f3666219576889
-- 
Florian

Re: [PATCH 4.9 00/57] 4.9.285-rc1 review

[Guenter Roeck]

On Mon, Oct 04, 2021 at 02:51:44PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.285 release.
> There are 57 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 06 Oct 2021 12:50:17 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 163 pass: 163 fail: 0
Qemu test results:
	total: 394 pass: 394 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 4.9 57/57] net: mdiobus: Fix memory leak in __mdiobus_register

[Greg Kroah-Hartman]

On Mon, Oct 04, 2021 at 01:35:20PM -0700, Florian Fainelli wrote:
> On 10/4/21 5:52 AM, Greg Kroah-Hartman wrote:
> > From: Yanfei Xu <yanfei.xu@windriver.com>
> > 
> > commit ab609f25d19858513919369ff3d9a63c02cd9e2e upstream.
> > 
> > Once device_register() failed, we should call put_device() to
> > decrement reference count for cleanup. Or it will cause memory
> > leak.
> 
> This changed has since been reverted upstream, please drop this change:
> 
> https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/commit/?id=10eff1f5788b6ffac212c254e2f3666219576889

Now dropped from everywhere, thanks.

greg k-h