[PATCH v2 0/4] clk: ralink: make system controller a reset provider

[PATCH v2 0/4] clk: ralink: make system controller a reset provider

[Sergio Paracuellos]

Hi all,

This patch series add minimal change to provide mt7621 resets properly
defining them in the 'mediatek,mt7621-sysc' node which is the system
controller of the SoC and is already providing clocks to the rest of
the world.

There is shared architecture code for all ralink platforms in 'reset.c'
file located in 'arch/mips/ralink' but the correct thing to do to align
hardware with software seems to define and add related reset code to the 
already mainlined clock driver.

After this changes, we can get rid of the useless reset controller node
in the device tree and use system controller node instead where the property
'#reset-cells' has been added. Binding documentation for this nodeq has
been updated with the new property accordly.

This series also provide a bindings include header where all related
reset bits for the MT7621 SoC are defined.

Also, please take a look to this review [0] to understand better motivation
for this series.

Thanks in advance for your feedback.

Changes in v2:
 - Address review comments of Dan Carpenter [1]:
    + Avoid 'inline' in function definition.
    + Return proper error codes (-EINVAL) instead of '-1'. 
    + Make use of 'devm_kzalloc' instead of 'kzalloc'.

Best regards,
    Sergio Paracuellos

[0]: https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20210926145931.14603-3-sergio.paracuellos@gmail.com/ 
[1]: https://lkml.org/lkml/2021/10/6/204

Sergio Paracuellos (4):
  dt-bindings: reset: add dt binding header for Mediatek MT7621 resets
  dt-bindings: clock: mediatek,mt7621-sysc: add '#reset-cells' property
  clk: ralink: make system controller node a reset provider
  staging: mt7621-dts: align resets with binding documentation

 .../bindings/clock/mediatek,mt7621-sysc.yaml  | 12 +++
 drivers/clk/ralink/clk-mt7621.c               | 79 +++++++++++++++++++
 drivers/staging/mt7621-dts/mt7621.dtsi        | 27 +++----
 include/dt-bindings/reset/mt7621-reset.h      | 37 +++++++++
 4 files changed, 140 insertions(+), 15 deletions(-)
 create mode 100644 include/dt-bindings/reset/mt7621-reset.h

-- 
2.33.0

[PATCH v2 1/4] dt-bindings: reset: add dt binding header for Mediatek MT7621 resets

[Sergio Paracuellos]

Add dt binding header for resets lines in Mediatek MT7621 SoCs.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
---
 include/dt-bindings/reset/mt7621-reset.h | 37 ++++++++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 include/dt-bindings/reset/mt7621-reset.h

diff --git a/include/dt-bindings/reset/mt7621-reset.h b/include/dt-bindings/reset/mt7621-reset.h
new file mode 100644
index 000000000000..7572c6b41453
--- /dev/null
+++ b/include/dt-bindings/reset/mt7621-reset.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2021 Sergio Paracuellos
+ * Author: Sergio Paracuellos <sergio.paracuellos@gmail.com>
+ */
+
+#ifndef DT_BINDING_MT7621_RESET_H
+#define DT_BINDING_MT7621_RESET_H
+
+#define MT7621_RST_SYS		0
+#define MT7621_RST_MCM		2
+#define MT7621_RST_HSDMA	5
+#define MT7621_RST_FE		6
+#define MT7621_RST_SPDIFTX	7
+#define MT7621_RST_TIMER	8
+#define MT7621_RST_INT		9
+#define MT7621_RST_MC		10
+#define MT7621_RST_PCM		11
+#define MT7621_RST_PIO		13
+#define MT7621_RST_GDMA		14
+#define MT7621_RST_NFI		15
+#define MT7621_RST_I2C		16
+#define MT7621_RST_I2S		17
+#define MT7621_RST_SPI		18
+#define MT7621_RST_UART1	19
+#define MT7621_RST_UART2	20
+#define MT7621_RST_UART3	21
+#define MT7621_RST_ETH		23
+#define MT7621_RST_PCIE0	24
+#define MT7621_RST_PCIE1	25
+#define MT7621_RST_PCIE2	26
+#define MT7621_RST_AUX_STCK	28
+#define MT7621_RST_CRYPTO	29
+#define MT7621_RST_SDXC		30
+#define MT7621_RST_PPE		31
+
+#endif /* DT_BINDING_MT7621_RESET_H */
-- 
2.33.0

[PATCH v2 2/4] dt-bindings: clock: mediatek,mt7621-sysc: add '#reset-cells' property

[Sergio Paracuellos]

Make system controller a reset provider for all the peripherals in the
MT7621 SoC adding '#reset-cells' property.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
---
 .../bindings/clock/mediatek,mt7621-sysc.yaml         | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml
index 915f84efd763..0c0b0ae5e2ac 100644
--- a/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml
@@ -22,6 +22,11 @@ description: |
 
   The clocks are provided inside a system controller node.
 
+  This node is also a reset provider for all the peripherals.
+
+  Reset related bits are defined in:
+  [2]: <include/dt-bindings/reset/mt7621-reset.h>.
+
 properties:
   compatible:
     items:
@@ -37,6 +42,12 @@ properties:
       clocks.
     const: 1
 
+  "#reset-cells":
+    description:
+      The first cell indicates the reset bit within the register, see
+      [2] for available resets.
+    const: 1
+
   ralink,memctl:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
@@ -61,6 +72,7 @@ examples:
       compatible = "mediatek,mt7621-sysc", "syscon";
       reg = <0x0 0x100>;
       #clock-cells = <1>;
+      #reset-cells = <1>;
       ralink,memctl = <&memc>;
       clock-output-names = "xtal", "cpu", "bus",
                            "50m", "125m", "150m",
-- 
2.33.0

[PATCH v2 3/4] clk: ralink: make system controller node a reset provider

[Sergio Paracuellos]

MT7621 system controller node is already providing the clocks for the whole
system but must also serve as a reset provider. Hence, add reset controller
related code to the clock driver itself.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
---
 drivers/clk/ralink/clk-mt7621.c | 79 +++++++++++++++++++++++++++++++++
 1 file changed, 79 insertions(+)

diff --git a/drivers/clk/ralink/clk-mt7621.c b/drivers/clk/ralink/clk-mt7621.c
index a2c045390f00..7a474bb4c877 100644
--- a/drivers/clk/ralink/clk-mt7621.c
+++ b/drivers/clk/ralink/clk-mt7621.c
@@ -11,14 +11,17 @@
 #include <linux/mfd/syscon.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
+#include <linux/reset-controller.h>
 #include <linux/slab.h>
 #include <dt-bindings/clock/mt7621-clk.h>
+#include <dt-bindings/reset/mt7621-reset.h>
 
 /* Configuration registers */
 #define SYSC_REG_SYSTEM_CONFIG0         0x10
 #define SYSC_REG_SYSTEM_CONFIG1         0x14
 #define SYSC_REG_CLKCFG0		0x2c
 #define SYSC_REG_CLKCFG1		0x30
+#define SYSC_REG_RESET_CTRL		0x34
 #define SYSC_REG_CUR_CLK_STS		0x44
 #define MEMC_REG_CPU_PLL		0x648
 
@@ -398,6 +401,76 @@ static void __init mt7621_clk_init(struct device_node *node)
 }
 CLK_OF_DECLARE_DRIVER(mt7621_clk, "mediatek,mt7621-sysc", mt7621_clk_init);
 
+struct mt7621_rst {
+	struct reset_controller_dev rcdev;
+	struct regmap *sysc;
+};
+
+static struct mt7621_rst *to_mt7621_rst(struct reset_controller_dev *dev)
+{
+	return container_of(dev, struct mt7621_rst, rcdev);
+}
+
+static int mt7621_assert_device(struct reset_controller_dev *rcdev,
+				unsigned long id)
+{
+	struct mt7621_rst *data = to_mt7621_rst(rcdev);
+	struct regmap *sysc = data->sysc;
+
+	if (id == MT7621_RST_SYS)
+		return -EINVAL;
+
+	return regmap_update_bits(sysc, SYSC_REG_RESET_CTRL, BIT(id), BIT(id));
+}
+
+static int mt7621_deassert_device(struct reset_controller_dev *rcdev,
+				  unsigned long id)
+{
+	struct mt7621_rst *data = to_mt7621_rst(rcdev);
+	struct regmap *sysc = data->sysc;
+
+	if (id == MT7621_RST_SYS)
+		return -EINVAL;
+
+	return regmap_update_bits(sysc, SYSC_REG_RESET_CTRL, BIT(id), 0);
+}
+
+static int mt7621_reset_device(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	int ret;
+
+	ret = mt7621_assert_device(rcdev, id);
+	if (ret < 0)
+		return ret;
+
+	return mt7621_deassert_device(rcdev, id);
+}
+
+static const struct reset_control_ops reset_ops = {
+	.reset = mt7621_reset_device,
+	.assert = mt7621_assert_device,
+	.deassert = mt7621_deassert_device
+};
+
+static int mt7621_reset_init(struct device *dev, struct regmap *sysc)
+{
+	struct mt7621_rst *rst_data;
+
+	rst_data = devm_kzalloc(dev, sizeof(*rst_data), GFP_KERNEL);
+	if (!rst_data)
+		return -ENOMEM;
+
+	rst_data->sysc = sysc;
+	rst_data->rcdev.ops = &reset_ops;
+	rst_data->rcdev.owner = THIS_MODULE;
+	rst_data->rcdev.nr_resets = 32;
+	rst_data->rcdev.of_reset_n_cells = 1;
+	rst_data->rcdev.of_node = dev_of_node(dev);
+
+	return devm_reset_controller_register(dev, &rst_data->rcdev);
+}
+
 static int mt7621_clk_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
@@ -424,6 +497,12 @@ static int mt7621_clk_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	ret = mt7621_reset_init(dev, priv->sysc);
+	if (ret) {
+		pr_err("Could not init reset controller\n");
+		return ret;
+	}
+
 	count = ARRAY_SIZE(mt7621_clks_base) +
 		ARRAY_SIZE(mt7621_fixed_clks) + ARRAY_SIZE(mt7621_gates);
 	clk_data = devm_kzalloc(dev, struct_size(clk_data, hws, count),
-- 
2.33.0

[PATCH v2 4/4] staging: mt7621-dts: align resets with binding documentation

[Sergio Paracuellos]

Binding documentation for compatible 'mediatek,mt7621-sysc' has been updated
to be used as a reset provider. Align reset related bits and system controller
node with binding documentation along the dtsi file.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
---
 drivers/staging/mt7621-dts/mt7621.dtsi | 27 ++++++++++++--------------
 1 file changed, 12 insertions(+), 15 deletions(-)

diff --git a/drivers/staging/mt7621-dts/mt7621.dtsi b/drivers/staging/mt7621-dts/mt7621.dtsi
index 719ef28171f4..72b99d8b4647 100644
--- a/drivers/staging/mt7621-dts/mt7621.dtsi
+++ b/drivers/staging/mt7621-dts/mt7621.dtsi
@@ -1,6 +1,7 @@
 #include <dt-bindings/interrupt-controller/mips-gic.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/mt7621-clk.h>
+#include <dt-bindings/reset/mt7621-reset.h>
 
 / {
 	#address-cells = <1>;
@@ -59,6 +60,7 @@ sysc: syscon@0 {
 			compatible = "mediatek,mt7621-sysc", "syscon";
 			reg = <0x0 0x100>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 			ralink,memctl = <&memc>;
 			clock-output-names = "xtal", "cpu", "bus",
 					     "50m", "125m", "150m",
@@ -88,7 +90,7 @@ i2c: i2c@900 {
 
 			clocks = <&sysc MT7621_CLK_I2C>;
 			clock-names = "i2c";
-			resets = <&rstctrl 16>;
+			resets = <&sysc MT7621_RST_I2C>;
 			reset-names = "i2c";
 
 			#address-cells = <1>;
@@ -106,7 +108,7 @@ i2s: i2s@a00 {
 
 			clocks = <&sysc MT7621_CLK_I2S>;
 			clock-names = "i2s";
-			resets = <&rstctrl 17>;
+			resets = <&sysc MT7621_RST_I2S>;
 			reset-names = "i2s";
 
 			interrupt-parent = <&gic>;
@@ -151,7 +153,7 @@ spi0: spi@b00 {
 			clocks = <&sysc MT7621_CLK_SPI>;
 			clock-names = "spi";
 
-			resets = <&rstctrl 18>;
+			resets = <&sysc MT7621_RST_SPI>;
 			reset-names = "spi";
 
 			#address-cells = <1>;
@@ -167,7 +169,7 @@ gdma: gdma@2800 {
 
 			clocks = <&sysc MT7621_CLK_GDMA>;
 			clock-names = "gdma";
-			resets = <&rstctrl 14>;
+			resets = <&sysc MT7621_RST_GDMA>;
 			reset-names = "dma";
 
 			interrupt-parent = <&gic>;
@@ -186,7 +188,7 @@ hsdma: hsdma@7000 {
 
 			clocks = <&sysc MT7621_CLK_HSDMA>;
 			clock-names = "hsdma";
-			resets = <&rstctrl 5>;
+			resets = <&sysc MT7621_RST_HSDMA>;
 			reset-names = "hsdma";
 
 			interrupt-parent = <&gic>;
@@ -286,11 +288,6 @@ pinmux {
 		};
 	};
 
-	rstctrl: rstctrl {
-		compatible = "ralink,rt2880-reset";
-		#reset-cells = <1>;
-	};
-
 	sdhci: sdhci@1E130000 {
 		status = "disabled";
 
@@ -383,7 +380,7 @@ ethernet: ethernet@1e100000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		resets = <&rstctrl 6 &rstctrl 23>;
+		resets = <&sysc MT7621_CLK_FE &sysc MT7621_CLK_ETH>;
 		reset-names = "fe", "eth";
 
 		interrupt-parent = <&gic>;
@@ -428,7 +425,7 @@ switch0: switch0@0 {
 				#size-cells = <0>;
 				reg = <0>;
 				mediatek,mcm;
-				resets = <&rstctrl 2>;
+				resets = <&sysc MT7621_RST_MCM>;
 				reset-names = "mcm";
 				interrupt-controller;
 				#interrupt-cells = <1>;
@@ -514,7 +511,7 @@ pcie@0,0 {
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0>;
 			interrupt-map = <0 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&rstctrl 24>;
+			resets = <&sysc MT7621_RST_PCIE0>;
 			clocks = <&sysc MT7621_CLK_PCIE0>;
 			phys = <&pcie0_phy 1>;
 			phy-names = "pcie-phy0";
@@ -529,7 +526,7 @@ pcie@1,0 {
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0>;
 			interrupt-map = <0 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&rstctrl 25>;
+			resets = <&sysc MT7621_RST_PCIE1>;
 			clocks = <&sysc MT7621_CLK_PCIE1>;
 			phys = <&pcie0_phy 1>;
 			phy-names = "pcie-phy1";
@@ -544,7 +541,7 @@ pcie@2,0 {
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0>;
 			interrupt-map = <0 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&rstctrl 26>;
+			resets = <&sysc MT7621_RST_PCIE2>;
 			clocks = <&sysc MT7621_CLK_PCIE2>;
 			phys = <&pcie2_phy 0>;
 			phy-names = "pcie-phy2";
-- 
2.33.0

Re: [PATCH v2 1/4] dt-bindings: reset: add dt binding header for Mediatek MT7621 resets

[Rob Herring]

On Wed, 06 Oct 2021 13:23:03 +0200, Sergio Paracuellos wrote:
> Add dt binding header for resets lines in Mediatek MT7621 SoCs.
> 
> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
> ---
>  include/dt-bindings/reset/mt7621-reset.h | 37 ++++++++++++++++++++++++
>  1 file changed, 37 insertions(+)
>  create mode 100644 include/dt-bindings/reset/mt7621-reset.h
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2 2/4] dt-bindings: clock: mediatek,mt7621-sysc: add '#reset-cells' property

[Rob Herring]

On Wed, 06 Oct 2021 13:23:04 +0200, Sergio Paracuellos wrote:
> Make system controller a reset provider for all the peripherals in the
> MT7621 SoC adding '#reset-cells' property.
> 
> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
> ---
>  .../bindings/clock/mediatek,mt7621-sysc.yaml         | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2 0/4] clk: ralink: make system controller a reset provider

[Sergio Paracuellos]

Hi Stephen,

On Wed, Oct 6, 2021 at 1:23 PM Sergio Paracuellos
<sergio.paracuellos@gmail.com> wrote:
>
> Hi all,
>
> This patch series add minimal change to provide mt7621 resets properly
> defining them in the 'mediatek,mt7621-sysc' node which is the system
> controller of the SoC and is already providing clocks to the rest of
> the world.
>
> There is shared architecture code for all ralink platforms in 'reset.c'
> file located in 'arch/mips/ralink' but the correct thing to do to align
> hardware with software seems to define and add related reset code to the
> already mainlined clock driver.
>
> After this changes, we can get rid of the useless reset controller node
> in the device tree and use system controller node instead where the property
> '#reset-cells' has been added. Binding documentation for this nodeq has
> been updated with the new property accordly.
>
> This series also provide a bindings include header where all related
> reset bits for the MT7621 SoC are defined.
>
> Also, please take a look to this review [0] to understand better motivation
> for this series.
>
> Thanks in advance for your feedback.
>
> Changes in v2:
>  - Address review comments of Dan Carpenter [1]:
>     + Avoid 'inline' in function definition.
>     + Return proper error codes (-EINVAL) instead of '-1'.
>     + Make use of 'devm_kzalloc' instead of 'kzalloc'.

Can you please take a look into this series? I'd like them to be added
in the next merge window and if something needs to be changed I'd like
to have a bit of time to do it :)).

Regarding how to merge this I guess all of the patches should apply
cleanly in any tree but since there are already changes in mt7621-dts
maybe patches 1 and 4 which are related can go through the staging
tree (if Greg is ok with this) and the bindings doc change and driver
changes (patches 2 and 3) can go through your tree.

Thanks in advance for your time.

Best regards,
    Sergio Paracuellos

>
> Best regards,
>     Sergio Paracuellos
>
> [0]: https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20210926145931.14603-3-sergio.paracuellos@gmail.com/
> [1]: https://lkml.org/lkml/2021/10/6/204
>
> Sergio Paracuellos (4):
>   dt-bindings: reset: add dt binding header for Mediatek MT7621 resets
>   dt-bindings: clock: mediatek,mt7621-sysc: add '#reset-cells' property
>   clk: ralink: make system controller node a reset provider
>   staging: mt7621-dts: align resets with binding documentation
>
>  .../bindings/clock/mediatek,mt7621-sysc.yaml  | 12 +++
>  drivers/clk/ralink/clk-mt7621.c               | 79 +++++++++++++++++++
>  drivers/staging/mt7621-dts/mt7621.dtsi        | 27 +++----
>  include/dt-bindings/reset/mt7621-reset.h      | 37 +++++++++
>  4 files changed, 140 insertions(+), 15 deletions(-)
>  create mode 100644 include/dt-bindings/reset/mt7621-reset.h
>
> --
> 2.33.0
>

Re: [PATCH v2 0/4] clk: ralink: make system controller a reset provider

[Sergio Paracuellos]

Hi Stephen,

On Sun, Oct 17, 2021 at 8:51 AM Sergio Paracuellos
<sergio.paracuellos@gmail.com> wrote:
>
> Hi Stephen,
>
> On Wed, Oct 6, 2021 at 1:23 PM Sergio Paracuellos
> <sergio.paracuellos@gmail.com> wrote:
> >
> > Hi all,
> >
> > This patch series add minimal change to provide mt7621 resets properly
> > defining them in the 'mediatek,mt7621-sysc' node which is the system
> > controller of the SoC and is already providing clocks to the rest of
> > the world.
> >
> > There is shared architecture code for all ralink platforms in 'reset.c'
> > file located in 'arch/mips/ralink' but the correct thing to do to align
> > hardware with software seems to define and add related reset code to the
> > already mainlined clock driver.
> >
> > After this changes, we can get rid of the useless reset controller node
> > in the device tree and use system controller node instead where the property
> > '#reset-cells' has been added. Binding documentation for this nodeq has
> > been updated with the new property accordly.
> >
> > This series also provide a bindings include header where all related
> > reset bits for the MT7621 SoC are defined.
> >
> > Also, please take a look to this review [0] to understand better motivation
> > for this series.
> >
> > Thanks in advance for your feedback.
> >
> > Changes in v2:
> >  - Address review comments of Dan Carpenter [1]:
> >     + Avoid 'inline' in function definition.
> >     + Return proper error codes (-EINVAL) instead of '-1'.
> >     + Make use of 'devm_kzalloc' instead of 'kzalloc'.
>
> Can you please take a look into this series? I'd like them to be added
> in the next merge window and if something needs to be changed I'd like
> to have a bit of time to do it :)).
>
> Regarding how to merge this I guess all of the patches should apply
> cleanly in any tree but since there are already changes in mt7621-dts
> maybe patches 1 and 4 which are related can go through the staging
> tree (if Greg is ok with this) and the bindings doc change and driver
> changes (patches 2 and 3) can go through your tree.

I have just sent v3 since PATCH 4 did not apply cleanly anymore in
both clock tree and staging tree.

Best regards,
     Sergio Paracuellos
>
> Thanks in advance for your time.
>
> Best regards,
>     Sergio Paracuellos
>
> >
> > Best regards,
> >     Sergio Paracuellos
> >
> > [0]: https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20210926145931.14603-3-sergio.paracuellos@gmail.com/
> > [1]: https://lkml.org/lkml/2021/10/6/204
> >
> > Sergio Paracuellos (4):
> >   dt-bindings: reset: add dt binding header for Mediatek MT7621 resets
> >   dt-bindings: clock: mediatek,mt7621-sysc: add '#reset-cells' property
> >   clk: ralink: make system controller node a reset provider
> >   staging: mt7621-dts: align resets with binding documentation
> >
> >  .../bindings/clock/mediatek,mt7621-sysc.yaml  | 12 +++
> >  drivers/clk/ralink/clk-mt7621.c               | 79 +++++++++++++++++++
> >  drivers/staging/mt7621-dts/mt7621.dtsi        | 27 +++----
> >  include/dt-bindings/reset/mt7621-reset.h      | 37 +++++++++
> >  4 files changed, 140 insertions(+), 15 deletions(-)
> >  create mode 100644 include/dt-bindings/reset/mt7621-reset.h
> >
> > --
> > 2.33.0
> >