All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nikita Travkin <nikita@trvn.ru>
To: jic23@kernel.org
Cc: lars@metafoo.de, robh+dt@kernel.org, stephan@gerhold.net,
	linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, Nikita Travkin <nikita@trvn.ru>
Subject: [PATCH 3/4] iio: light: ltr501: Add rudimentary regulator support
Date: Wed,  6 Oct 2021 21:30:57 +0500	[thread overview]
Message-ID: <20211006163058.145842-3-nikita@trvn.ru> (raw)
In-Reply-To: <20211006163058.145842-1-nikita@trvn.ru>

On some platforms the supply regulators must be enabled before the
sensor can work. Add vdd and vddio regulators for the sensor and IO bus
power respectively.

Signed-off-by: Nikita Travkin <nikita@trvn.ru>
---
 drivers/iio/light/ltr501.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/iio/light/ltr501.c b/drivers/iio/light/ltr501.c
index 1830221da48d..57851c8ef1c6 100644
--- a/drivers/iio/light/ltr501.c
+++ b/drivers/iio/light/ltr501.c
@@ -15,6 +15,7 @@
 #include <linux/delay.h>
 #include <linux/regmap.h>
 #include <linux/acpi.h>
+#include <linux/regulator/consumer.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/events.h>
@@ -151,6 +152,7 @@ struct ltr501_chip_info {
 
 struct ltr501_data {
 	struct i2c_client *client;
+	struct regulator_bulk_data regulators[2];
 	struct mutex lock_als, lock_ps;
 	const struct ltr501_chip_info *chip_info;
 	u8 als_contr, ps_contr;
@@ -1379,6 +1381,13 @@ static const struct regmap_config ltr501_regmap_config = {
 	.volatile_reg = ltr501_is_volatile_reg,
 };
 
+static void ltr501_disable_regulators(void *d)
+{
+	struct ltr501_data *data = d;
+
+	regulator_bulk_disable(ARRAY_SIZE(data->regulators), data->regulators);
+}
+
 static int ltr501_powerdown(struct ltr501_data *data)
 {
 	return ltr501_write_contr(data, data->als_contr &
@@ -1423,6 +1432,25 @@ static int ltr501_probe(struct i2c_client *client,
 	mutex_init(&data->lock_als);
 	mutex_init(&data->lock_ps);
 
+	data->regulators[0].supply = "vdd";
+	data->regulators[1].supply = "vddio";
+	ret = devm_regulator_bulk_get(&client->dev,
+				      ARRAY_SIZE(data->regulators),
+				      data->regulators);
+	if (ret)
+		return dev_err_probe(&client->dev, ret,
+				     "Failed to get regulators\n");
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(data->regulators),
+				    data->regulators);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(&client->dev,
+				       ltr501_disable_regulators, data);
+	if (ret)
+		return ret;
+
 	data->reg_it = devm_regmap_field_alloc(&client->dev, regmap,
 					       reg_field_it);
 	if (IS_ERR(data->reg_it)) {
-- 
2.30.2


  parent reply	other threads:[~2021-10-06 16:39 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-06 16:30 [PATCH 1/4] dt-bindings: vendor-prefixes: Document liteon vendor prefix Nikita Travkin
2021-10-06 16:30 ` [PATCH 2/4] dt-bindings: iio: light: Document ltr501 light sensor bindings Nikita Travkin
2021-10-14 20:28   ` Rob Herring
2021-10-06 16:30 ` Nikita Travkin [this message]
2021-10-06 16:30 ` [PATCH 4/4] iio: light: ltr501: Add of_device_id table Nikita Travkin
2021-10-07 15:41 ` [PATCH 1/4] dt-bindings: vendor-prefixes: Document liteon vendor prefix Jonathan Cameron
2021-10-14 20:28 ` Rob Herring
2021-10-16 15:55   ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211006163058.145842-3-nikita@trvn.ru \
    --to=nikita@trvn.ru \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=stephan@gerhold.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.