From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 42341C433EF for ; Thu, 7 Oct 2021 21:34:23 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 27F0E61139 for ; Thu, 7 Oct 2021 21:34:23 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S242147AbhJGVgP (ORCPT ); Thu, 7 Oct 2021 17:36:15 -0400 Received: from m-r2.th.seeweb.it ([5.144.164.171]:42291 "EHLO m-r2.th.seeweb.it" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S242008AbhJGVgF (ORCPT ); Thu, 7 Oct 2021 17:36:05 -0400 Received: from Marijn-Arch-PC.localdomain (94-209-165-62.cable.dynamic.v4.ziggo.nl [94.209.165.62]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by m-r2.th.seeweb.it (Postfix) with ESMTPSA id A8A903E7BE; Thu, 7 Oct 2021 23:34:09 +0200 (CEST) From: Marijn Suijten To: phone-devel@vger.kernel.org Cc: ~postmarketos/upstreaming@lists.sr.ht, AngeloGioacchino Del Regno , Konrad Dybcio , Martin Botka , Jami Kettunen , Pavel Dubrova , Marijn Suijten , Andy Gross , Bjorn Andersson , Lee Jones , Daniel Thompson , Jingoo Han , Kiran Gunda , linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-fbdev@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 09/13] backlight: qcom-wled: Respect enabled-strings in set_brightness Date: Thu, 7 Oct 2021 23:33:56 +0200 Message-Id: <20211007213400.258371-10-marijn.suijten@somainline.org> X-Mailer: git-send-email 2.33.0 In-Reply-To: <20211007213400.258371-1-marijn.suijten@somainline.org> References: <20211007213400.258371-1-marijn.suijten@somainline.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org The hardware is capable of controlling any non-contiguous sequence of LEDs specified in the DT using qcom,enabled-strings as u32 array, and this also follows from the DT-bindings documentation. The numbers specified in this array represent indices of the LED strings that are to be enabled and disabled. Its value is appropriately used to setup and enable string modules, but completely disregarded in the set_brightness paths which only iterate over the number of strings linearly. Take an example where only string 2 is enabled with qcom,enabled_strings=<2>: this string is appropriately enabled but subsequent brightness changes would have only touched the zero'th brightness register because num_strings is 1 here. This is simply addressed by looking up the string for this index in the enabled_strings array just like the other codepaths that iterate over num_strings. Likewise enabled_strings is now also used in the autodetection path for consistent behaviour: when a list of strings is specified in DT only those strings will be probed for autodetection, analogous to how the number of strings that need to be probed is already bound by qcom,num-strings. After all autodetection uses the set_brightness helpers to set an initial value, which could otherwise end up changing brightness on a different set of strings. Fixes: 775d2ffb4af6 ("backlight: qcom-wled: Restructure the driver for WLED3") Fixes: 03b2b5e86986 ("backlight: qcom-wled: Add support for WLED4 peripheral") Signed-off-by: Marijn Suijten Reviewed-by: AngeloGioacchino Del Regno --- drivers/video/backlight/qcom-wled.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c index 4524e80591cd..bdda6b424113 100644 --- a/drivers/video/backlight/qcom-wled.c +++ b/drivers/video/backlight/qcom-wled.c @@ -237,7 +237,7 @@ static int wled3_set_brightness(struct wled *wled, u16 brightness) for (i = 0; i < wled->cfg.num_strings; ++i) { rc = regmap_bulk_write(wled->regmap, wled->ctrl_addr + - WLED3_SINK_REG_BRIGHT(i), + WLED3_SINK_REG_BRIGHT(wled->cfg.enabled_strings[i]), &v, sizeof(v)); if (rc < 0) return rc; @@ -259,7 +259,7 @@ static int wled4_set_brightness(struct wled *wled, u16 brightness) for (i = 0; i < wled->cfg.num_strings; ++i) { rc = regmap_bulk_write(wled->regmap, wled->sink_addr + - WLED4_SINK_REG_BRIGHT(i), + WLED4_SINK_REG_BRIGHT(wled->cfg.enabled_strings[i]), &v, sizeof(v)); if (rc < 0) return rc; @@ -569,7 +569,7 @@ static irqreturn_t wled_short_irq_handler(int irq, void *_wled) static void wled_auto_string_detection(struct wled *wled) { - int rc = 0, i, delay_time_us; + int rc = 0, i, j, delay_time_us; u32 sink_config = 0; u8 sink_test = 0, sink_valid = 0, val; bool fault_set; @@ -616,14 +616,15 @@ static void wled_auto_string_detection(struct wled *wled) /* Iterate through the strings one by one */ for (i = 0; i < wled->cfg.num_strings; i++) { - sink_test = BIT((WLED4_SINK_REG_CURR_SINK_SHFT + i)); + j = wled->cfg.enabled_strings[i]; + sink_test = BIT((WLED4_SINK_REG_CURR_SINK_SHFT + j)); /* Enable feedback control */ rc = regmap_write(wled->regmap, wled->ctrl_addr + - WLED3_CTRL_REG_FEEDBACK_CONTROL, i + 1); + WLED3_CTRL_REG_FEEDBACK_CONTROL, j + 1); if (rc < 0) { dev_err(wled->dev, "Failed to enable feedback for SINK %d rc = %d\n", - i + 1, rc); + j + 1, rc); goto failed_detect; } @@ -632,7 +633,7 @@ static void wled_auto_string_detection(struct wled *wled) WLED4_SINK_REG_CURR_SINK, sink_test); if (rc < 0) { dev_err(wled->dev, "Failed to configure SINK %d rc=%d\n", - i + 1, rc); + j + 1, rc); goto failed_detect; } @@ -659,7 +660,7 @@ static void wled_auto_string_detection(struct wled *wled) if (fault_set) dev_dbg(wled->dev, "WLED OVP fault detected with SINK %d\n", - i + 1); + j + 1); else sink_valid |= sink_test; @@ -699,15 +700,16 @@ static void wled_auto_string_detection(struct wled *wled) /* Enable valid sinks */ if (wled->version == 4) { for (i = 0; i < wled->cfg.num_strings; i++) { + j = wled->cfg.enabled_strings[i]; if (sink_config & - BIT(WLED4_SINK_REG_CURR_SINK_SHFT + i)) + BIT(WLED4_SINK_REG_CURR_SINK_SHFT + j)) val = WLED4_SINK_REG_STR_MOD_MASK; else /* Disable modulator_en for unused sink */ val = 0; rc = regmap_write(wled->regmap, wled->sink_addr + - WLED4_SINK_REG_STR_MOD_EN(i), val); + WLED4_SINK_REG_STR_MOD_EN(j), val); if (rc < 0) { dev_err(wled->dev, "Failed to configure MODULATOR_EN rc=%d\n", rc); -- 2.33.0