Re: imx6 DM_VIDEObroken

[Anatolij Gustschin <agust@denx.de>]

On Thu, 7 Oct 2021 12:50:04 -0700
Tim Harvey tharvey@gateworks.com wrote:
...
> > then vidconsole should be enabled.  
> 
> Anatolij,
> 
> That is my configuration yet vidconsole does not enable until I
> 'setenv stdout serial,vidconsole':
> Ventana > print stdout
> stdout=serial,vidconsole
> ^^^ see splash, yet no vidconsole
> Ventana > setenv stdout serial,vidconsole
> ^^^ now I see vidconsole

Tim,

something in your board config or code must be different, then.
Do you use HDMI or LVDS display?

> Do you perhaps have another board to check this behavior with on master?

I've tested with current master and a modified wandboard configuration:

U-Boot SPL 2021.10-00525-g7a508a7245-dirty (Oct 07 2021 - 23:32:09 +0200)
Trying to boot from MMC1


U-Boot 2021.10-00525-g7a508a7245-dirty (Oct 07 2021 - 23:32:09 +0200)

CPU:   Freescale i.MX6SOLO rev1.1 at 792 MHz
Reset cause: WDOG
DRAM:  512 MiB
MMC:   FSL_SDHC: 4, FSL_SDHC: 1, FSL_SDHC: 0
Loading Environment from MMC... OK
auto-detected panel HDMI
Display: HDMI (1024x768)
In:    serial
Out:   vidconsole
Err:   vidconsole
Board: Wandboard rev B1
Net:   eth0: ethernet@2188000
Hit any key to stop autoboot:  0 
=> print stdout 
stdout=serial,vidconsole

HDMI monitor displays logo and video console text output starting with:
Board: Wandboard rev B1
Net:   eth0: ethernet@2188000
Hit any key to stop autoboot:  0 

It works on wandboard.

The wandboard_defconfig in master has CONFIG_CONSOLE_MUX disabled
and CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE enabled. Therefore I enabled
CONFIG_CONSOLE_MUX and disabled CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
via menuconfig for this test.
And additionally I used below patch to enable building this configuration:

diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c
index da995dd0f5..73e1a0701f 100644
--- a/board/wandboard/wandboard.c
+++ b/board/wandboard/wandboard.c
@@ -391,11 +391,11 @@ int power_init_board(void)
 /*
  * Do not overwrite the console
  * Use always serial for U-Boot console
- */
 int overwrite_console(void)
 {
        return 1;
 }
+ */
 
 #ifdef CONFIG_CMD_BMODE
 static const struct boot_mode board_boot_modes[] = {


--
Anatolij