All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alistair Francis <alistair@alistair23.me>
To: lee.jones@linaro.org, robh+dt@kernel.org, lgirdwood@gmail.com,
	broonie@kernel.org, kernel@pengutronix.de
Cc: shawnguo@kernel.org, s.hauer@pengutronix.de, linux-imx@nxp.com,
	amitk@kernel.org, rui.zhang@intel.com,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	alistair23@gmail.com, linux-hwmon@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org,
	Alistair Francis <alistair@alistair23.me>
Subject: [PATCH v12 08/10] ARM: dts: imx7d: remarkable2: Enable silergy,sy7636a
Date: Sat,  9 Oct 2021 21:50:30 +1000	[thread overview]
Message-ID: <20211009115031.18392-12-alistair@alistair23.me> (raw)
In-Reply-To: <20211009115031.18392-1-alistair@alistair23.me>

Enable the silergy,sy7636a and silergy,sy7636a-regulator on the
reMarkable2.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
 arch/arm/boot/dts/imx7d-remarkable2.dts | 41 +++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
index 2099784d6515..1b49c26816cd 100644
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -87,6 +87,33 @@ wacom_digitizer: digitizer@9 {
 	};
 };
 
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	epd_pmic: sy7636a@62 {
+		compatible = "silergy,sy7636a";
+		reg = <0x62>;
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_epdpmic>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#thermal-sensor-cells = <0>;
+
+		epd-pwr-good-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+		regulators {
+			reg_epdpmic: vcom {
+				regulator-name = "vcom";
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -180,6 +207,13 @@ MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x14
 		>;
 	};
 
+	pinctrl_epdpmic: epdpmicgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x00000074
+			MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x00000014
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
@@ -187,6 +221,13 @@ MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
 		>;
 	};
 
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_I2C4_SDA__I2C4_SDA		0x4000007f
+			MX7D_PAD_I2C4_SCL__I2C4_SCL		0x4000007f
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
-- 
2.31.1


WARNING: multiple messages have this Message-ID
From: Alistair Francis <alistair@alistair23.me>
To: lee.jones@linaro.org, robh+dt@kernel.org, lgirdwood@gmail.com,
	broonie@kernel.org, kernel@pengutronix.de
Cc: shawnguo@kernel.org, s.hauer@pengutronix.de, linux-imx@nxp.com,
	amitk@kernel.org, rui.zhang@intel.com,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	alistair23@gmail.com, linux-hwmon@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org,
	Alistair Francis <alistair@alistair23.me>
Subject: [PATCH v12 08/10] ARM: dts: imx7d: remarkable2: Enable silergy, sy7636a
Date: Sat,  9 Oct 2021 21:50:30 +1000	[thread overview]
Message-ID: <20211009115031.18392-12-alistair@alistair23.me> (raw)
In-Reply-To: <20211009115031.18392-1-alistair@alistair23.me>

Enable the silergy,sy7636a and silergy,sy7636a-regulator on the
reMarkable2.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
 arch/arm/boot/dts/imx7d-remarkable2.dts | 41 +++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
index 2099784d6515..1b49c26816cd 100644
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -87,6 +87,33 @@ wacom_digitizer: digitizer@9 {
 	};
 };
 
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	epd_pmic: sy7636a@62 {
+		compatible = "silergy,sy7636a";
+		reg = <0x62>;
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_epdpmic>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#thermal-sensor-cells = <0>;
+
+		epd-pwr-good-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+		regulators {
+			reg_epdpmic: vcom {
+				regulator-name = "vcom";
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -180,6 +207,13 @@ MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x14
 		>;
 	};
 
+	pinctrl_epdpmic: epdpmicgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x00000074
+			MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x00000014
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
@@ -187,6 +221,13 @@ MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
 		>;
 	};
 
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_I2C4_SDA__I2C4_SDA		0x4000007f
+			MX7D_PAD_I2C4_SCL__I2C4_SCL		0x4000007f
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
-- 
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-10-09 11:51 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-09 11:50 [PATCH v12 00/10] Add support for the silergy,sy7636a Alistair Francis
2021-10-09 11:50 ` Alistair Francis
2021-10-09 11:50 ` [PATCH v12 01/10] dt-bindings: mfd: Initial commit of silergy,sy7636a.yaml Alistair Francis
2021-10-09 11:50   ` [PATCH v12 01/10] dt-bindings: mfd: Initial commit of silergy, sy7636a.yaml Alistair Francis
2021-10-09 11:50 ` [PATCH v12 02/10] mfd: simple-mfd-i2c: Add a Kconfig name Alistair Francis
2021-10-09 11:50   ` Alistair Francis
2021-10-09 11:50 ` [PATCH 3/7] capsules: symmetric_encryption/aes: Reduce code size Alistair Francis
2021-10-09 11:50   ` Alistair Francis
2021-10-09 11:55   ` Alistair Francis
2021-10-09 11:55     ` Alistair Francis
2021-10-09 11:50 ` [PATCH v12 03/10] mfd: simple-mfd-i2c: Enable support for the silergy,sy7636a Alistair Francis
2021-10-09 11:50   ` [PATCH v12 03/10] mfd: simple-mfd-i2c: Enable support for the silergy, sy7636a Alistair Francis
2021-10-09 11:50 ` [PATCH 4/7] capsules: sha: Continue reducing code size Alistair Francis
2021-10-09 11:50   ` Alistair Francis
2021-10-09 11:56   ` Alistair Francis
2021-10-09 11:56     ` Alistair Francis
2021-10-09 11:50 ` [PATCH v12 04/10] regulator: sy7636a: Remove requirement on sy7636a mfd Alistair Francis
2021-10-09 11:50   ` Alistair Francis
2021-10-09 11:50 ` [PATCH 5/7] capsules: hmac: Continue reducing code size Alistair Francis
2021-10-09 11:50   ` Alistair Francis
2021-10-09 11:56   ` Alistair Francis
2021-10-09 11:56     ` Alistair Francis
2021-10-09 11:50 ` [PATCH v12 05/10] thermal: sy7636a: Add thermal driver for sy7636a Alistair Francis
2021-10-09 11:50   ` Alistair Francis
2021-10-09 23:49   ` Guenter Roeck
2021-10-09 23:49     ` Guenter Roeck
2021-10-09 11:50 ` [PATCH v12 06/10] hwmon: sy7636a: Add temperature " Alistair Francis
2021-10-09 11:50   ` Alistair Francis
2021-10-09 13:49   ` Guenter Roeck
2021-10-09 13:49     ` Guenter Roeck
2021-10-09 11:50 ` [PATCH v12 07/10] ARM: imx_v6_v7_defconfig: Enable silergy,sy7636a Alistair Francis
2021-10-09 11:50   ` Alistair Francis
2021-10-09 11:50 ` Alistair Francis [this message]
2021-10-09 11:50   ` [PATCH v12 08/10] ARM: dts: imx7d: remarkable2: Enable silergy, sy7636a Alistair Francis
2021-10-09 11:50 ` [PATCH v12 09/10] ARM: imx_v6_v7_defconfig: Enable backlight class devices Alistair Francis
2021-10-09 11:50   ` Alistair Francis
2021-10-09 14:29   ` Fabio Estevam
2021-10-09 14:29     ` Fabio Estevam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211009115031.18392-12-alistair@alistair23.me \
    --to=alistair@alistair23.me \
    --cc=alistair23@gmail.com \
    --cc=amitk@kernel.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@pengutronix.de \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --subject='Re: [PATCH v12 08/10] ARM: dts: imx7d: remarkable2: Enable silergy,sy7636a' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.