All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede@redhat.com>
To: "Rafael J . Wysocki" <rjw@rjwysocki.net>,
	Mark Gross <markgross@kernel.org>,
	Andy Shevchenko <andy@infradead.org>,
	Daniel Scally <djrscally@gmail.com>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>, Len Brown <lenb@kernel.org>,
	linux-acpi@vger.kernel.org, platform-driver-x86@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	Kate Hsuan <hpa@redhat.com>,
	linux-media@vger.kernel.org, linux-clk@vger.kernel.org
Subject: [PATCH v2 10/13] platform/x86: int3472: Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell
Date: Sat,  9 Oct 2021 18:05:45 +0200	[thread overview]
Message-ID: <20211009160548.306550-11-hdegoede@redhat.com> (raw)
In-Reply-To: <20211009160548.306550-1-hdegoede@redhat.com>

Pass tps68470_regulator_platform_data to the tps68470-regulator
MFD-cell, specifying the voltages of the various regulators and
tying the regulators to the sensor supplies so that sensors which use
the TPS68470 can find their regulators.

Since the voltages and supply connections are board-specific, this
introduces a DMI matches int3472_tps68470_board_data struct which
contains the necessary per-board info.

This per-board info also includes GPIO lookup information for the
sensor GPIOs which may be connected to the tps68470 gpios.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/platform/x86/intel/int3472/Makefile   |   2 +-
 drivers/platform/x86/intel/int3472/tps68470.c |  28 +++++
 drivers/platform/x86/intel/int3472/tps68470.h |  25 ++++
 .../x86/intel/int3472/tps68470_board_data.c   | 118 ++++++++++++++++++
 4 files changed, 172 insertions(+), 1 deletion(-)
 create mode 100644 drivers/platform/x86/intel/int3472/tps68470.h
 create mode 100644 drivers/platform/x86/intel/int3472/tps68470_board_data.c

diff --git a/drivers/platform/x86/intel/int3472/Makefile b/drivers/platform/x86/intel/int3472/Makefile
index 771e720528a0..cfec7784c5c9 100644
--- a/drivers/platform/x86/intel/int3472/Makefile
+++ b/drivers/platform/x86/intel/int3472/Makefile
@@ -1,4 +1,4 @@
 obj-$(CONFIG_INTEL_SKL_INT3472)		+= intel_skl_int3472_discrete.o \
 					   intel_skl_int3472_tps68470.o
 intel_skl_int3472_discrete-y		:= discrete.o clk_and_regulator.o common.o
-intel_skl_int3472_tps68470-y		:= tps68470.o common.o
+intel_skl_int3472_tps68470-y		:= tps68470.o tps68470_board_data.o common.o
diff --git a/drivers/platform/x86/intel/int3472/tps68470.c b/drivers/platform/x86/intel/int3472/tps68470.c
index cb161aef22bd..c53c7960ee09 100644
--- a/drivers/platform/x86/intel/int3472/tps68470.c
+++ b/drivers/platform/x86/intel/int3472/tps68470.c
@@ -9,6 +9,7 @@
 #include <linux/regmap.h>
 
 #include "common.h"
+#include "tps68470.h"
 
 #define DESIGNED_FOR_CHROMEOS		1
 #define DESIGNED_FOR_WINDOWS		2
@@ -100,6 +101,7 @@ static int skl_int3472_tps68470_calc_type(struct acpi_device *adev)
 static int skl_int3472_tps68470_probe(struct i2c_client *client)
 {
 	struct acpi_device *adev = ACPI_COMPANION(&client->dev);
+	const struct int3472_tps68470_board_data *board_data;
 	struct tps68470_clk_platform_data clk_pdata = {};
 	struct mfd_cell *cells;
 	struct regmap *regmap;
@@ -128,6 +130,12 @@ static int skl_int3472_tps68470_probe(struct i2c_client *client)
 	device_type = skl_int3472_tps68470_calc_type(adev);
 	switch (device_type) {
 	case DESIGNED_FOR_WINDOWS:
+		board_data = int3472_tps68470_get_board_data(dev_name(&client->dev));
+		if (!board_data) {
+			dev_err(&client->dev, "No board-data found for this laptop/tablet model\n");
+			return -ENODEV;
+		}
+
 		cells = kcalloc(3, sizeof(*cells), GFP_KERNEL);
 		if (!cells)
 			return -ENOMEM;
@@ -136,6 +144,8 @@ static int skl_int3472_tps68470_probe(struct i2c_client *client)
 		cells[0].platform_data = &clk_pdata;
 		cells[0].pdata_size = sizeof(clk_pdata);
 		cells[1].name = "tps68470-regulator";
+		cells[1].platform_data = (void *)board_data->tps68470_regulator_pdata;
+		cells[1].pdata_size = sizeof(struct tps68470_regulator_platform_data);
 		/*
 		 * The GPIO cell must be last because acpi_gpiochip_add() calls
 		 * acpi_dev_clear_dependencies() and the clk + regulators must
@@ -143,9 +153,15 @@ static int skl_int3472_tps68470_probe(struct i2c_client *client)
 		 */
 		cells[2].name = "tps68470-gpio";
 
+		gpiod_add_lookup_table(board_data->tps68470_gpio_lookup_table);
+
 		ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE, cells, 3,
 					   NULL, 0, NULL);
 		kfree(cells);
+
+		if (ret)
+			gpiod_remove_lookup_table(board_data->tps68470_gpio_lookup_table);
+
 		break;
 	case DESIGNED_FOR_CHROMEOS:
 		ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE,
@@ -160,6 +176,17 @@ static int skl_int3472_tps68470_probe(struct i2c_client *client)
 	return ret;
 }
 
+static int skl_int3472_tps68470_remove(struct i2c_client *client)
+{
+	const struct int3472_tps68470_board_data *board_data;
+
+	board_data = int3472_tps68470_get_board_data(dev_name(&client->dev));
+	if (board_data)
+		gpiod_remove_lookup_table(board_data->tps68470_gpio_lookup_table);
+
+	return 0;
+}
+
 static const struct acpi_device_id int3472_device_id[] = {
 	{ "INT3472", 0 },
 	{ }
@@ -172,6 +199,7 @@ static struct i2c_driver int3472_tps68470 = {
 		.acpi_match_table = int3472_device_id,
 	},
 	.probe_new = skl_int3472_tps68470_probe,
+	.remove = skl_int3472_tps68470_remove,
 };
 module_i2c_driver(int3472_tps68470);
 
diff --git a/drivers/platform/x86/intel/int3472/tps68470.h b/drivers/platform/x86/intel/int3472/tps68470.h
new file mode 100644
index 000000000000..cfd33eb62740
--- /dev/null
+++ b/drivers/platform/x86/intel/int3472/tps68470.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * TI TPS68470 PMIC platform data definition.
+ *
+ * Copyright (c) 2021 Red Hat Inc.
+ *
+ * Red Hat authors:
+ * Hans de Goede <hdegoede@redhat.com>
+ */
+
+#ifndef _INTEL_SKL_INT3472_TPS68470_H
+#define _INTEL_SKL_INT3472_TPS68470_H
+
+struct gpiod_lookup_table;
+struct tps68470_regulator_platform_data;
+
+struct int3472_tps68470_board_data {
+	const char *dev_name;
+	struct gpiod_lookup_table *tps68470_gpio_lookup_table;
+	const struct tps68470_regulator_platform_data *tps68470_regulator_pdata;
+};
+
+const struct int3472_tps68470_board_data *int3472_tps68470_get_board_data(const char *dev_name);
+
+#endif
diff --git a/drivers/platform/x86/intel/int3472/tps68470_board_data.c b/drivers/platform/x86/intel/int3472/tps68470_board_data.c
new file mode 100644
index 000000000000..96954a789bb8
--- /dev/null
+++ b/drivers/platform/x86/intel/int3472/tps68470_board_data.c
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * TI TPS68470 PMIC platform data definition.
+ *
+ * Copyright (c) 2021 Dan Scally <djrscally@gmail.com>
+ * Copyright (c) 2021 Red Hat Inc.
+ *
+ * Red Hat authors:
+ * Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <linux/dmi.h>
+#include <linux/gpio/machine.h>
+#include <linux/platform_data/tps68470.h>
+#include <linux/regulator/machine.h>
+#include "tps68470.h"
+
+static struct regulator_consumer_supply int347a_core_consumer_supplies[] = {
+	REGULATOR_SUPPLY("dvdd", "i2c-INT347A:00"),
+};
+
+static struct regulator_consumer_supply int347a_ana_consumer_supplies[] = {
+	REGULATOR_SUPPLY("avdd", "i2c-INT347A:00"),
+};
+
+static struct regulator_consumer_supply int347a_vsio_consumer_supplies[] = {
+	REGULATOR_SUPPLY("dovdd", "i2c-INT347A:00"),
+};
+
+static const struct regulator_init_data surface_go_tps68470_core_reg_init_data = {
+	.constraints = {
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(int347a_core_consumer_supplies),
+	.consumer_supplies = int347a_core_consumer_supplies,
+};
+
+static const struct regulator_init_data surface_go_tps68470_ana_reg_init_data = {
+	.constraints = {
+		.min_uV = 2815200,
+		.max_uV = 2815200,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(int347a_ana_consumer_supplies),
+	.consumer_supplies = int347a_ana_consumer_supplies,
+};
+
+static const struct regulator_init_data surface_go_tps68470_vsio_reg_init_data = {
+	.constraints = {
+		.min_uV = 1800600,
+		.max_uV = 1800600,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(int347a_vsio_consumer_supplies),
+	.consumer_supplies = int347a_vsio_consumer_supplies,
+};
+
+static const struct tps68470_regulator_platform_data surface_go_tps68470_pdata = {
+	.reg_init_data = {
+		[TPS68470_CORE] = &surface_go_tps68470_core_reg_init_data,
+		[TPS68470_ANA]  = &surface_go_tps68470_ana_reg_init_data,
+		[TPS68470_VSIO] = &surface_go_tps68470_vsio_reg_init_data,
+	},
+};
+
+static struct gpiod_lookup_table surface_go_tps68470_gpios = {
+	.dev_id = "i2c-INT347A:00",
+	.table = {
+		GPIO_LOOKUP("tps68470-gpio", 9, "reset", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("tps68470-gpio", 7, "powerdown", GPIO_ACTIVE_LOW)
+	}
+};
+
+static const struct int3472_tps68470_board_data surface_go_tps68470_board_data = {
+	.dev_name = "i2c-INT3472:05",
+	.tps68470_gpio_lookup_table = &surface_go_tps68470_gpios,
+	.tps68470_regulator_pdata = &surface_go_tps68470_pdata,
+};
+
+static const struct dmi_system_id int3472_tps68470_board_data_table[] = {
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Go"),
+		},
+		.driver_data = (void *)&surface_go_tps68470_board_data,
+	},
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Go 2"),
+		},
+		.driver_data = (void *)&surface_go_tps68470_board_data,
+	},
+	{ }
+};
+
+const struct int3472_tps68470_board_data *int3472_tps68470_get_board_data(const char *dev_name)
+{
+	const struct int3472_tps68470_board_data *board_data;
+	const struct dmi_system_id *match;
+
+	match = dmi_first_match(int3472_tps68470_board_data_table);
+	while (match) {
+		board_data = match->driver_data;
+		if (strcmp(board_data->dev_name, dev_name) == 0)
+			return board_data;
+
+		dmi_first_match(++match);
+	}
+
+	return NULL;
+}
-- 
2.31.1


  parent reply	other threads:[~2021-10-09 16:06 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-09 16:05 [PATCH v2 00/13] Add support for X86/ACPI camera sensor/PMIC setup with clk and regulator platform data Hans de Goede
2021-10-09 16:05 ` [PATCH v2 01/13] ACPI: Add a honor_deps flag to struct acpi_device Hans de Goede
2021-10-09 16:05 ` [PATCH v2 02/13] ACPI: honor dependencies for devices with a _DEP pointing to an INT3472 device Hans de Goede
2021-10-10 15:10   ` Hans de Goede
2021-10-09 16:05 ` [PATCH v2 03/13] platform_data: Add linux/platform_data/tps68470.h file Hans de Goede
2021-10-09 16:05 ` [PATCH v2 04/13] regulator: Introduce tps68470-regulator driver Hans de Goede
2021-10-11 11:02   ` Mark Brown
2021-10-09 16:05 ` [PATCH v2 05/13] clk: Introduce clk-tps68470 driver Hans de Goede
2021-10-09 16:05 ` [PATCH v2 06/13] platform/x86: int3472: Enable I2c daisy chain Hans de Goede
2021-10-09 16:05 ` [PATCH v2 07/13] platform/x86: int3472: Split into 2 drivers Hans de Goede
2021-10-09 16:05 ` [PATCH v2 08/13] platform/x86: int3472: Add get_sensor_adev_and_name() helper Hans de Goede
2021-10-09 16:05 ` [PATCH v2 09/13] platform/x86: int3472: Pass tps68470_clk_platform_data to the tps68470-regulator MFD-cell Hans de Goede
2021-10-09 16:05 ` Hans de Goede [this message]
2021-10-09 16:05 ` [PATCH v2 11/13] platform/x86: int3472: Deal with probe ordering issues Hans de Goede
2021-10-09 16:05 ` [PATCH v2 12/13] media: ipu3-cio2: Add INT347A to cio2-bridge Hans de Goede
2021-10-09 16:05 ` [PATCH v2 13/13] media: ipu3-cio2: Add module soft-deps for the INT3472 drivers Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211009160548.306550-11-hdegoede@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=andy@infradead.org \
    --cc=broonie@kernel.org \
    --cc=djrscally@gmail.com \
    --cc=hpa@redhat.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=lenb@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=markgross@kernel.org \
    --cc=mchehab@kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=rjw@rjwysocki.net \
    --cc=sakari.ailus@linux.intel.com \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.