All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ansuel Smith <ansuelsmth@gmail.com>
To: Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Russell King <linux@armlinux.org.uk>,
	netdev@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Ansuel Smith <ansuelsmth@gmail.com>
Subject: [net-next PATCH v4 01/13] net: dsa: qca8k: add mac_power_sel support
Date: Sun, 10 Oct 2021 13:15:44 +0200	[thread overview]
Message-ID: <20211010111556.30447-2-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20211010111556.30447-1-ansuelsmth@gmail.com>

Add missing mac power sel support needed for ipq8064/5 SoC that require
1.8v for the internal regulator port instead of the default 1.5v.
If other device needs this, consider adding a dedicated binding to
support this.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/net/dsa/qca8k.c | 31 +++++++++++++++++++++++++++++++
 drivers/net/dsa/qca8k.h |  5 +++++
 2 files changed, 36 insertions(+)

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index bda5a9bf4f52..a892b897cd0d 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -950,6 +950,33 @@ qca8k_setup_of_rgmii_delay(struct qca8k_priv *priv)
 	return 0;
 }
 
+static int
+qca8k_setup_mac_pwr_sel(struct qca8k_priv *priv)
+{
+	u32 mask = 0;
+	int ret = 0;
+
+	/* SoC specific settings for ipq8064.
+	 * If more device require this consider adding
+	 * a dedicated binding.
+	 */
+	if (of_machine_is_compatible("qcom,ipq8064"))
+		mask |= QCA8K_MAC_PWR_RGMII0_1_8V;
+
+	/* SoC specific settings for ipq8065 */
+	if (of_machine_is_compatible("qcom,ipq8065"))
+		mask |= QCA8K_MAC_PWR_RGMII1_1_8V;
+
+	if (mask) {
+		ret = qca8k_rmw(priv, QCA8K_REG_MAC_PWR_SEL,
+				QCA8K_MAC_PWR_RGMII0_1_8V |
+				QCA8K_MAC_PWR_RGMII1_1_8V,
+				mask);
+	}
+
+	return ret;
+}
+
 static int
 qca8k_setup(struct dsa_switch *ds)
 {
@@ -979,6 +1006,10 @@ qca8k_setup(struct dsa_switch *ds)
 	if (ret)
 		return ret;
 
+	ret = qca8k_setup_mac_pwr_sel(priv);
+	if (ret)
+		return ret;
+
 	/* Enable CPU Port */
 	ret = qca8k_reg_set(priv, QCA8K_REG_GLOBAL_FW_CTRL0,
 			    QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN);
diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h
index ed3b05ad6745..fc7db94cc0c9 100644
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h
@@ -100,6 +100,11 @@
 #define   QCA8K_SGMII_MODE_CTRL_PHY			(1 << 22)
 #define   QCA8K_SGMII_MODE_CTRL_MAC			(2 << 22)
 
+/* MAC_PWR_SEL registers */
+#define QCA8K_REG_MAC_PWR_SEL				0x0e4
+#define   QCA8K_MAC_PWR_RGMII1_1_8V			BIT(18)
+#define   QCA8K_MAC_PWR_RGMII0_1_8V			BIT(19)
+
 /* EEE control registers */
 #define QCA8K_REG_EEE_CTRL				0x100
 #define  QCA8K_REG_EEE_CTRL_LPI_EN(_i)			((_i + 1) * 2)
-- 
2.32.0


  reply	other threads:[~2021-10-10 11:16 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-10 11:15 [net-next PATCH v4 00/13] Multiple improvement for qca8337 switch Ansuel Smith
2021-10-10 11:15 ` Ansuel Smith [this message]
2021-10-10 19:42   ` [net-next PATCH v4 01/13] net: dsa: qca8k: add mac_power_sel support Vladimir Oltean
2021-10-10 11:15 ` [net-next PATCH v4 02/13] net: dsa: qca8k: add support for sgmii falling edge Ansuel Smith
2021-10-10 12:05   ` Vladimir Oltean
2021-10-10 12:10     ` Ansuel Smith
2021-10-10 12:50       ` Vladimir Oltean
2021-10-10 11:15 ` [net-next PATCH v4 03/13] dt-bindings: net: dsa: qca8k: Add MAC swap and clock phase properties Ansuel Smith
2021-10-10 12:07   ` Vladimir Oltean
2021-10-10 12:11     ` Ansuel Smith
2021-10-10 11:15 ` [net-next PATCH v4 04/13] drivers: net: dsa: qca8k: add support for cpu port 6 Ansuel Smith
2021-10-10 12:42   ` Vladimir Oltean
2021-10-10 13:22     ` Ansuel Smith
2021-10-11  8:17       ` Jonathan McDowell
2021-10-10 11:15 ` [net-next PATCH v4 05/13] dt-bindings: net: dsa: qca8k: Document support for CPU " Ansuel Smith
2021-10-10 11:15 ` [net-next PATCH v4 06/13] net: dsa: qca8k: move rgmii delay detection to phylink mac_config Ansuel Smith
2021-10-10 12:47   ` Vladimir Oltean
2021-10-10 13:28     ` Ansuel Smith
2021-10-10 18:11       ` Vladimir Oltean
2021-10-10 18:18         ` Ansuel Smith
2021-10-10 15:18     ` Andrew Lunn
2021-10-10 15:53       ` Vladimir Oltean
2021-10-10 11:15 ` [net-next PATCH v4 07/13] net: dsa: qca8k: add explicit SGMII PLL enable Ansuel Smith
2021-10-10 11:15 ` [net-next PATCH v4 08/13] dt-bindings: net: dsa: qca8k: Document qca,sgmii-enable-pll Ansuel Smith
2021-10-10 11:15 ` [net-next PATCH v4 09/13] drivers: net: dsa: qca8k: add support for pws config reg Ansuel Smith
2021-10-10 11:15 ` [net-next PATCH v4 10/13] dt-bindings: net: dsa: qca8k: document open drain binding Ansuel Smith
2021-10-10 12:54   ` Vladimir Oltean
2021-10-10 11:15 ` [net-next PATCH v4 11/13] drivers: net: dsa: qca8k: add support for QCA8328 Ansuel Smith
2021-10-10 11:15 ` [net-next PATCH v4 12/13] dt-bindings: net: dsa: qca8k: document support for qca8328 Ansuel Smith
2021-10-10 11:15 ` [net-next PATCH v4 13/13] drivers: net: dsa: qca8k: set internal delay also for sgmii Ansuel Smith

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211010111556.30447-2-ansuelsmth@gmail.com \
    --to=ansuelsmth@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.