[PATCH 5/5] dpm/amd/pm: Navi10: 0 MHz is not a current clock frequency (v2)

[Luben Tuikov <luben.tuikov@amd.com>]

A current value of a clock frequency of 0, means
that the IP block is in some kind of low power
state. Ignore it and don't report it here. Here we
only report the possible operating (non-zero)
frequencies of the block requested. So, if the
current clock value is 0, then print the DPM
frequencies, but don't report a current value.

v2: Don't report the minimum one as the current
one when reported one is 0, i.e. don't add an
asterisk (Lijo). LT: It is conceivable that this
may confuse user-mode tools if they scan and look
for a current one, i.e. look for an asterisk, but
they'll have to adapt and use other methods for
finding power states of the chip--we can't report
0 as current.

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
---
 .../gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c   | 44 ++++++++++++-------
 1 file changed, 28 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c
index 646e9bbf8af42a..2af6fd336352aa 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c
@@ -1267,9 +1267,8 @@ static int navi10_print_clk_levels(struct smu_context *smu,
 {
 	uint16_t *curve_settings;
 	int i, size = 0, ret = 0;
-	uint32_t curr_value = 0, value = 0, count = 0;
+	uint32_t curr_value, value, count;
 	uint32_t freq_value[3] = {0, 0, 0};
-	uint32_t mark_index = 0;
 	struct smu_table_context *table_context = &smu->smu_table;
 	uint32_t gen_speed, lane_width;
 	struct smu_dpm_context *smu_dpm = &smu->smu_dpm;
@@ -1279,6 +1278,7 @@ static int navi10_print_clk_levels(struct smu_context *smu,
 		(OverDriveTable_t *)table_context->overdrive_table;
 	struct smu_11_0_overdrive_table *od_settings = smu->od_settings;
 	uint32_t min_value, max_value;
+	bool fine_grained;
 
 	smu_cmn_get_sysfs_buf(&buf, &size);
 
@@ -1296,12 +1296,20 @@ static int navi10_print_clk_levels(struct smu_context *smu,
 		if (ret)
 			return size;
 
+		ret = smu_v11_0_get_dpm_freq_by_index(smu, clk_type, 0,
+						      &freq_value[0]);
+		if (ret)
+			return size;
+
 		ret = smu_v11_0_get_dpm_level_count(smu, clk_type, &count);
 		if (ret)
 			return size;
 
-		if (!navi10_supports_fine_grained_dpm(smu, clk_type)) {
-			for (i = 0; i < count; i++) {
+		fine_grained = navi10_supports_fine_grained_dpm(smu, clk_type);
+		if (!fine_grained) {
+			size += sysfs_emit_at(buf, size, "%d: %uMhz %s\n", 0, freq_value[0],
+					      curr_value == freq_value[0] ? "*" : "");
+			for (i = 1; i < count; i++) {
 				ret = smu_v11_0_get_dpm_freq_by_index(smu, clk_type, i, &value);
 				if (ret)
 					return size;
@@ -1310,24 +1318,28 @@ static int navi10_print_clk_levels(struct smu_context *smu,
 						curr_value == value ? "*" : "");
 			}
 		} else {
-			ret = smu_v11_0_get_dpm_freq_by_index(smu, clk_type, 0, &freq_value[0]);
-			if (ret)
-				return size;
+			freq_value[1] = curr_value ?: freq_value[0];
 			ret = smu_v11_0_get_dpm_freq_by_index(smu, clk_type, count - 1, &freq_value[2]);
 			if (ret)
 				return size;
 
-			freq_value[1] = curr_value;
-			mark_index = curr_value == freq_value[0] ? 0 :
-				     curr_value == freq_value[2] ? 2 : 1;
-			if (mark_index != 1)
-				freq_value[1] = (freq_value[0] + freq_value[2]) / 2;
-
-			for (i = 0; i < 3; i++) {
-				size += sysfs_emit_at(buf, size, "%d: %uMhz %s\n", i, freq_value[i],
-						i == mark_index ? "*" : "");
+			if (freq_value[1] == freq_value[0]) {
+				i = 1;
+				count = 3;
+			} else if (freq_value[1] == freq_value[2]) {
+				i = 0;
+				count = 2;
+			} else {
+				i = 0;
+				count = 3;
 			}
 
+			for ( ; i < count; i++) {
+				size += sysfs_emit_at(buf, size,
+						      "%d: %uMhz %s\n",
+						      i, freq_value[i],
+						      curr_value == freq_value[i] ? "*" : "");
+			}
 		}
 		break;
 	case SMU_PCIE:
-- 
2.33.1.558.g2bd2f258f4