All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alistair Francis <alistair@alistair23.me>
To: lee.jones@linaro.org, robh+dt@kernel.org, lgirdwood@gmail.com,
	broonie@kernel.org, kernel@pengutronix.de
Cc: shawnguo@kernel.org, s.hauer@pengutronix.de, linux-imx@nxp.com,
	amitk@kernel.org, rui.zhang@intel.com,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	alistair23@gmail.com, linux-hwmon@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org,
	Alistair Francis <alistair@alistair23.me>
Subject: [PATCH v13 6/9] hwmon: sy7636a: Add temperature driver for sy7636a
Date: Fri, 15 Oct 2021 22:25:48 +1000	[thread overview]
Message-ID: <20211015122551.38951-7-alistair@alistair23.me> (raw)
In-Reply-To: <20211015122551.38951-1-alistair@alistair23.me>

This is a multi-function device to interface with the sy7636a
EPD PMIC chip from Silergy.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
 Documentation/hwmon/sy7636a-hwmon.rst | 24 +++++++++
 drivers/hwmon/Kconfig                 |  9 ++++
 drivers/hwmon/Makefile                |  1 +
 drivers/hwmon/sy7636a-hwmon.c         | 75 +++++++++++++++++++++++++++
 4 files changed, 109 insertions(+)
 create mode 100644 Documentation/hwmon/sy7636a-hwmon.rst
 create mode 100644 drivers/hwmon/sy7636a-hwmon.c

diff --git a/Documentation/hwmon/sy7636a-hwmon.rst b/Documentation/hwmon/sy7636a-hwmon.rst
new file mode 100644
index 000000000000..6b3e36d028dd
--- /dev/null
+++ b/Documentation/hwmon/sy7636a-hwmon.rst
@@ -0,0 +1,24 @@
+Kernel driver sy7636a-hwmon
+=========================
+
+Supported chips:
+
+ * Silergy SY7636A PMIC
+
+
+Description
+-----------
+
+This driver adds hardware temperature reading support for
+the Silergy SY7636A PMIC.
+
+The following sensors are supported
+
+  * Temperature
+      - SoC on-die temperature in milli-degree C
+
+sysfs-Interface
+---------------
+
+temp0_input
+	- SoC on-die temperature (milli-degree C)
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index c4578e8f34bb..d768b833b721 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1651,6 +1651,15 @@ config SENSORS_SIS5595
 	  This driver can also be built as a module. If so, the module
 	  will be called sis5595.
 
+config SENSORS_SY7636A
+	tristate "Silergy SY7636A"
+	help
+	  If you say yes here you get support for the thermistor readout of
+	  the Silergy SY7636A PMIC.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called sy7636a-hwmon.
+
 config SENSORS_DME1737
 	tristate "SMSC DME1737, SCH311x and compatibles"
 	depends on I2C && !PPC
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 162940270661..1355ffdb1481 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -181,6 +181,7 @@ obj-$(CONFIG_SENSORS_SMSC47M1)	+= smsc47m1.o
 obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
 obj-$(CONFIG_SENSORS_SPARX5)	+= sparx5-temp.o
 obj-$(CONFIG_SENSORS_STTS751)	+= stts751.o
+obj-$(CONFIG_SENSORS_SY7636A)	+= sy7636a-hwmon.o
 obj-$(CONFIG_SENSORS_AMC6821)	+= amc6821.o
 obj-$(CONFIG_SENSORS_TC74)	+= tc74.o
 obj-$(CONFIG_SENSORS_THMC50)	+= thmc50.o
diff --git a/drivers/hwmon/sy7636a-hwmon.c b/drivers/hwmon/sy7636a-hwmon.c
new file mode 100644
index 000000000000..a59628f87ff3
--- /dev/null
+++ b/drivers/hwmon/sy7636a-hwmon.c
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Functions to access SY3686A power management chip temperature
+ *
+ * Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/
+ *
+ * Authors: Lars Ivar Miljeteig <lars.ivar.miljeteig@remarkable.com>
+ *          Alistair Francis <alistair@alistair23.me>
+ */
+
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/sysfs.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/sy7636a.h>
+
+static ssize_t show_temp(struct device *dev,
+			 struct device_attribute *attr, char *buf)
+{
+	unsigned int reg_val;
+	struct regmap *regmap = dev_get_drvdata(dev);
+	int ret;
+
+	ret = regmap_read(regmap, SY7636A_REG_TERMISTOR_READOUT, &reg_val);
+	if (ret)
+		return ret;
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", reg_val);
+}
+
+static SENSOR_DEVICE_ATTR(temp0, 0444, show_temp, NULL, 0);
+
+static struct attribute *sy7636a_attrs[] = {
+	&sensor_dev_attr_temp0.dev_attr.attr,
+	NULL
+};
+
+ATTRIBUTE_GROUPS(sy7636a);
+
+static int sy7636a_sensor_probe(struct platform_device *pdev)
+{
+	struct regmap *regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	struct device *hwmon_dev;
+	int err;
+
+	if (!regmap)
+		return -EPROBE_DEFER;
+
+	hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev,
+			"sy7636a_temperature", regmap, NULL, sy7636a_groups);
+
+	if (IS_ERR(hwmon_dev)) {
+		err = PTR_ERR(hwmon_dev);
+		dev_err(&pdev->dev, "Unable to register hwmon device, returned %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static struct platform_driver sy7636a_sensor_driver = {
+	.probe = sy7636a_sensor_probe,
+	.driver = {
+		.name = "sy7636a-temperature",
+	},
+};
+module_platform_driver(sy7636a_sensor_driver);
+
+MODULE_DESCRIPTION("SY7636A sensor driver");
+MODULE_LICENSE("GPL");
-- 
2.31.1


WARNING: multiple messages have this Message-ID
From: Alistair Francis <alistair@alistair23.me>
To: lee.jones@linaro.org, robh+dt@kernel.org, lgirdwood@gmail.com,
	broonie@kernel.org, kernel@pengutronix.de
Cc: shawnguo@kernel.org, s.hauer@pengutronix.de, linux-imx@nxp.com,
	amitk@kernel.org, rui.zhang@intel.com,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	alistair23@gmail.com, linux-hwmon@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org,
	Alistair Francis <alistair@alistair23.me>
Subject: [PATCH v13 6/9] hwmon: sy7636a: Add temperature driver for sy7636a
Date: Fri, 15 Oct 2021 22:25:48 +1000	[thread overview]
Message-ID: <20211015122551.38951-7-alistair@alistair23.me> (raw)
In-Reply-To: <20211015122551.38951-1-alistair@alistair23.me>

This is a multi-function device to interface with the sy7636a
EPD PMIC chip from Silergy.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
 Documentation/hwmon/sy7636a-hwmon.rst | 24 +++++++++
 drivers/hwmon/Kconfig                 |  9 ++++
 drivers/hwmon/Makefile                |  1 +
 drivers/hwmon/sy7636a-hwmon.c         | 75 +++++++++++++++++++++++++++
 4 files changed, 109 insertions(+)
 create mode 100644 Documentation/hwmon/sy7636a-hwmon.rst
 create mode 100644 drivers/hwmon/sy7636a-hwmon.c

diff --git a/Documentation/hwmon/sy7636a-hwmon.rst b/Documentation/hwmon/sy7636a-hwmon.rst
new file mode 100644
index 000000000000..6b3e36d028dd
--- /dev/null
+++ b/Documentation/hwmon/sy7636a-hwmon.rst
@@ -0,0 +1,24 @@
+Kernel driver sy7636a-hwmon
+=========================
+
+Supported chips:
+
+ * Silergy SY7636A PMIC
+
+
+Description
+-----------
+
+This driver adds hardware temperature reading support for
+the Silergy SY7636A PMIC.
+
+The following sensors are supported
+
+  * Temperature
+      - SoC on-die temperature in milli-degree C
+
+sysfs-Interface
+---------------
+
+temp0_input
+	- SoC on-die temperature (milli-degree C)
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index c4578e8f34bb..d768b833b721 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1651,6 +1651,15 @@ config SENSORS_SIS5595
 	  This driver can also be built as a module. If so, the module
 	  will be called sis5595.
 
+config SENSORS_SY7636A
+	tristate "Silergy SY7636A"
+	help
+	  If you say yes here you get support for the thermistor readout of
+	  the Silergy SY7636A PMIC.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called sy7636a-hwmon.
+
 config SENSORS_DME1737
 	tristate "SMSC DME1737, SCH311x and compatibles"
 	depends on I2C && !PPC
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 162940270661..1355ffdb1481 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -181,6 +181,7 @@ obj-$(CONFIG_SENSORS_SMSC47M1)	+= smsc47m1.o
 obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
 obj-$(CONFIG_SENSORS_SPARX5)	+= sparx5-temp.o
 obj-$(CONFIG_SENSORS_STTS751)	+= stts751.o
+obj-$(CONFIG_SENSORS_SY7636A)	+= sy7636a-hwmon.o
 obj-$(CONFIG_SENSORS_AMC6821)	+= amc6821.o
 obj-$(CONFIG_SENSORS_TC74)	+= tc74.o
 obj-$(CONFIG_SENSORS_THMC50)	+= thmc50.o
diff --git a/drivers/hwmon/sy7636a-hwmon.c b/drivers/hwmon/sy7636a-hwmon.c
new file mode 100644
index 000000000000..a59628f87ff3
--- /dev/null
+++ b/drivers/hwmon/sy7636a-hwmon.c
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Functions to access SY3686A power management chip temperature
+ *
+ * Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/
+ *
+ * Authors: Lars Ivar Miljeteig <lars.ivar.miljeteig@remarkable.com>
+ *          Alistair Francis <alistair@alistair23.me>
+ */
+
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/sysfs.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/sy7636a.h>
+
+static ssize_t show_temp(struct device *dev,
+			 struct device_attribute *attr, char *buf)
+{
+	unsigned int reg_val;
+	struct regmap *regmap = dev_get_drvdata(dev);
+	int ret;
+
+	ret = regmap_read(regmap, SY7636A_REG_TERMISTOR_READOUT, &reg_val);
+	if (ret)
+		return ret;
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", reg_val);
+}
+
+static SENSOR_DEVICE_ATTR(temp0, 0444, show_temp, NULL, 0);
+
+static struct attribute *sy7636a_attrs[] = {
+	&sensor_dev_attr_temp0.dev_attr.attr,
+	NULL
+};
+
+ATTRIBUTE_GROUPS(sy7636a);
+
+static int sy7636a_sensor_probe(struct platform_device *pdev)
+{
+	struct regmap *regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	struct device *hwmon_dev;
+	int err;
+
+	if (!regmap)
+		return -EPROBE_DEFER;
+
+	hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev,
+			"sy7636a_temperature", regmap, NULL, sy7636a_groups);
+
+	if (IS_ERR(hwmon_dev)) {
+		err = PTR_ERR(hwmon_dev);
+		dev_err(&pdev->dev, "Unable to register hwmon device, returned %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static struct platform_driver sy7636a_sensor_driver = {
+	.probe = sy7636a_sensor_probe,
+	.driver = {
+		.name = "sy7636a-temperature",
+	},
+};
+module_platform_driver(sy7636a_sensor_driver);
+
+MODULE_DESCRIPTION("SY7636A sensor driver");
+MODULE_LICENSE("GPL");
-- 
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-10-15 12:26 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-15 12:25 [PATCH v13 0/9] Add support for the silergy,sy7636a Alistair Francis
2021-10-15 12:25 ` Alistair Francis
2021-10-15 12:25 ` [PATCH v13 1/9] dt-bindings: mfd: Initial commit of silergy,sy7636a.yaml Alistair Francis
2021-10-15 12:25   ` [PATCH v13 1/9] dt-bindings: mfd: Initial commit of silergy, sy7636a.yaml Alistair Francis
2021-10-22 10:30   ` [PATCH v13 1/9] dt-bindings: mfd: Initial commit of silergy,sy7636a.yaml Lee Jones
2021-10-22 10:30     ` Lee Jones
2021-10-15 12:25 ` [PATCH v13 2/9] mfd: simple-mfd-i2c: Add a Kconfig name Alistair Francis
2021-10-15 12:25   ` Alistair Francis
2021-10-22 10:30   ` Lee Jones
2021-10-22 10:30     ` Lee Jones
2021-10-15 12:25 ` [PATCH v13 3/9] mfd: simple-mfd-i2c: Enable support for the silergy,sy7636a Alistair Francis
2021-10-15 12:25   ` [PATCH v13 3/9] mfd: simple-mfd-i2c: Enable support for the silergy, sy7636a Alistair Francis
2021-10-21 11:27   ` [PATCH v13 3/9] mfd: simple-mfd-i2c: Enable support for the silergy,sy7636a Lee Jones
2021-10-21 11:27     ` Lee Jones
2021-10-15 12:25 ` [PATCH v13 4/9] regulator: sy7636a: Remove requirement on sy7636a mfd Alistair Francis
2021-10-15 12:25   ` Alistair Francis
2021-10-15 12:25 ` [PATCH v13 5/9] thermal: sy7636a: Add thermal driver for sy7636a Alistair Francis
2021-10-15 12:25   ` Alistair Francis
2021-10-16 10:32   ` Daniel Lezcano
2021-10-16 10:32     ` Daniel Lezcano
2021-10-15 12:25 ` Alistair Francis [this message]
2021-10-15 12:25   ` [PATCH v13 6/9] hwmon: sy7636a: Add temperature " Alistair Francis
2021-10-15 14:12   ` Guenter Roeck
2021-10-15 14:12     ` Guenter Roeck
2021-10-15 12:25 ` [PATCH v13 7/9] ARM: imx_v6_v7_defconfig: Enable silergy,sy7636a Alistair Francis
2021-10-15 12:25   ` Alistair Francis
2021-10-15 12:25 ` [PATCH v13 8/9] ARM: dts: imx7d: remarkable2: " Alistair Francis
2021-10-15 12:25   ` Alistair Francis
2021-10-15 12:25 ` [PATCH v13 9/9] ARM: dts: imx7d: remarkable2: Enable lcdif Alistair Francis
2021-10-15 12:25   ` Alistair Francis
2021-10-22  0:52 ` (subset) [PATCH v13 0/9] Add support for the silergy,sy7636a Mark Brown
2021-10-22  0:52   ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211015122551.38951-7-alistair@alistair23.me \
    --to=alistair@alistair23.me \
    --cc=alistair23@gmail.com \
    --cc=amitk@kernel.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@pengutronix.de \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --subject='Re: [PATCH v13 6/9] hwmon: sy7636a: Add temperature driver for sy7636a' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.