All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jakub Kicinski <kuba@kernel.org>
To: kvalo@codeaurora.org
Cc: linux-wireless@vger.kernel.org, Jakub Kicinski <kuba@kernel.org>,
	merez@codeaurora.org, wil6210@qti.qualcomm.com
Subject: [PATCH 05/15] wireless: wil6210: use eth_hw_addr_set()
Date: Mon, 18 Oct 2021 16:50:11 -0700	[thread overview]
Message-ID: <20211018235021.1279697-6-kuba@kernel.org> (raw)
In-Reply-To: <20211018235021.1279697-1-kuba@kernel.org>

Commit 406f42fa0d3c ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

Do the special encoding on the stack, then copy the address.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
---
CC: merez@codeaurora.org
CC: kvalo@codeaurora.org
CC: linux-wireless@vger.kernel.org
CC: wil6210@qti.qualcomm.com
---
 drivers/net/wireless/ath/wil6210/cfg80211.c | 8 +++++---
 drivers/net/wireless/ath/wil6210/wil6210.h  | 2 +-
 drivers/net/wireless/ath/wil6210/wmi.c      | 2 +-
 3 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index bd8d0a54af77..764d1d14132b 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -725,9 +725,11 @@ wil_cfg80211_add_iface(struct wiphy *wiphy, const char *name,
 	if (is_valid_ether_addr(params->macaddr)) {
 		eth_hw_addr_set(ndev, params->macaddr);
 	} else {
-		eth_hw_addr_set(ndev, ndev_main->perm_addr);
-		ndev->dev_addr[0] = (ndev->dev_addr[0] ^ (1 << vif->mid)) |
-			0x2; /* locally administered */
+		u8 addr[ETH_ALEN];
+
+		ether_addr_copy(addr, ndev_main->perm_addr);
+		addr[0] = (addr[0] ^ (1 << vif->mid)) |	0x2; /* locally administered */
+		eth_hw_addr_set(ndev, addr);
 	}
 	wdev = vif_to_wdev(vif);
 	ether_addr_copy(wdev->address, ndev->dev_addr);
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 30392eb1cbbd..11946ecd0b99 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -1341,7 +1341,7 @@ struct wil6210_priv *wil_cfg80211_init(struct device *dev);
 void wil_cfg80211_deinit(struct wil6210_priv *wil);
 void wil_p2p_wdev_free(struct wil6210_priv *wil);
 
-int wmi_set_mac_address(struct wil6210_priv *wil, void *addr);
+int wmi_set_mac_address(struct wil6210_priv *wil, const void *addr);
 int wmi_pcp_start(struct wil6210_vif *vif, int bi, u8 wmi_nettype, u8 chan,
 		  u8 edmg_chan, u8 hidden_ssid, u8 is_go);
 int wmi_pcp_stop(struct wil6210_vif *vif);
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 2dc8406736f4..dd8abbb28849 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -2097,7 +2097,7 @@ int wmi_echo(struct wil6210_priv *wil)
 			WIL_WMI_CALL_GENERAL_TO_MS);
 }
 
-int wmi_set_mac_address(struct wil6210_priv *wil, void *addr)
+int wmi_set_mac_address(struct wil6210_priv *wil, const void *addr)
 {
 	struct wil6210_vif *vif = ndev_to_vif(wil->main_ndev);
 	struct wmi_set_mac_address_cmd cmd;
-- 
2.31.1


  parent reply	other threads:[~2021-10-18 23:50 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-18 23:50 [PATCH 00/15] wireless: don't write to netdev->dev_addr directly Jakub Kicinski
2021-10-18 23:50 ` [PATCH 01/15] wireless: use eth_hw_addr_set() Jakub Kicinski
2021-10-20  9:40   ` Kalle Valo
2021-10-18 23:50 ` [PATCH 02/15] wireless: use eth_hw_addr_set() instead of ether_addr_copy() Jakub Kicinski
2021-10-18 23:50 ` [PATCH 03/15] wireless: use eth_hw_addr_set() for dev->addr_len cases Jakub Kicinski
2021-10-18 23:50 ` [PATCH 04/15] wireless: ath6kl: use eth_hw_addr_set() Jakub Kicinski
2021-10-18 23:50 ` Jakub Kicinski [this message]
2021-10-18 23:50 ` [PATCH 06/15] wireless: atmel: " Jakub Kicinski
2021-10-18 23:50 ` [PATCH 07/15] wireless: brcmfmac: prepare for const netdev->dev_addr Jakub Kicinski
2021-10-18 23:50 ` [PATCH 08/15] wireless: cisco: use eth_hw_addr_set() Jakub Kicinski
2021-10-19  6:24   ` Sebastian Andrzej Siewior
2021-10-18 23:50 ` [PATCH 09/15] wireless: ipw2200: prepare for const netdev->dev_addr Jakub Kicinski
2021-10-24 11:53   ` Stanislav Yakovlev
2021-10-18 23:50 ` [PATCH 10/15] wireless: intersil: use eth_hw_addr_set() Jakub Kicinski
2021-10-18 23:50 ` [PATCH 11/15] wireless: mac80211_hwsim: " Jakub Kicinski
2021-10-18 23:50 ` [PATCH 12/15] wireless: wilc1000: " Jakub Kicinski
2021-10-18 23:50 ` [PATCH 13/15] wireless: ray_cs: " Jakub Kicinski
2021-10-18 23:50 ` [PATCH 14/15] wireless: wl3501_cs: " Jakub Kicinski
2021-10-18 23:50 ` [PATCH 15/15] wireless: zd1201: " Jakub Kicinski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211018235021.1279697-6-kuba@kernel.org \
    --to=kuba@kernel.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=merez@codeaurora.org \
    --cc=wil6210@qti.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.