All of lore.kernel.org
 help / color / mirror / Atom feed
From: Johan Hovold <johan@kernel.org>
To: Ian Abbott <abbotti@mev.co.uk>,
	H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	Johan Hovold <johan@kernel.org>,
	stable@vger.kernel.org
Subject: [PATCH 5/5] comedi: vmk80xx: fix bulk and interrupt message timeouts
Date: Mon, 25 Oct 2021 13:45:32 +0200	[thread overview]
Message-ID: <20211025114532.4599-6-johan@kernel.org> (raw)
In-Reply-To: <20211025114532.4599-1-johan@kernel.org>

USB bulk and interrupt message timeouts are specified in milliseconds
and should specifically not vary with CONFIG_HZ.

Note that the bulk-out transfer timeout was set to the endpoint
bInterval value, which should be ignored for bulk endpoints and is
typically set to zero. This meant that a failing bulk-out transfer
would never time out.

Assume that the 10 second timeout used for all other transfers is more
than enough also for the bulk-out endpoint.

Fixes: 985cafccbf9b ("Staging: Comedi: vmk80xx: Add k8061 support")
Fixes: 951348b37738 ("staging: comedi: vmk80xx: wait for URBs to complete")
Cc: stable@vger.kernel.org      # 2.6.31
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/comedi/drivers/vmk80xx.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/comedi/drivers/vmk80xx.c b/drivers/comedi/drivers/vmk80xx.c
index 9c56918e3b76..4b00a9ea611a 100644
--- a/drivers/comedi/drivers/vmk80xx.c
+++ b/drivers/comedi/drivers/vmk80xx.c
@@ -91,6 +91,7 @@ enum {
 #define IC6_VERSION		BIT(1)
 
 #define MIN_BUF_SIZE		64
+#define PACKET_TIMEOUT		10000	/* ms */
 
 enum vmk80xx_model {
 	VMK8055_MODEL,
@@ -169,10 +170,11 @@ static void vmk80xx_do_bulk_msg(struct comedi_device *dev)
 	tx_size = usb_endpoint_maxp(devpriv->ep_tx);
 	rx_size = usb_endpoint_maxp(devpriv->ep_rx);
 
-	usb_bulk_msg(usb, tx_pipe, devpriv->usb_tx_buf,
-		     tx_size, NULL, devpriv->ep_tx->bInterval);
+	usb_bulk_msg(usb, tx_pipe, devpriv->usb_tx_buf, tx_size, NULL,
+		     PACKET_TIMEOUT);
 
-	usb_bulk_msg(usb, rx_pipe, devpriv->usb_rx_buf, rx_size, NULL, HZ * 10);
+	usb_bulk_msg(usb, rx_pipe, devpriv->usb_rx_buf, rx_size, NULL,
+		     PACKET_TIMEOUT);
 }
 
 static int vmk80xx_read_packet(struct comedi_device *dev)
@@ -191,7 +193,7 @@ static int vmk80xx_read_packet(struct comedi_device *dev)
 	pipe = usb_rcvintpipe(usb, ep->bEndpointAddress);
 	return usb_interrupt_msg(usb, pipe, devpriv->usb_rx_buf,
 				 usb_endpoint_maxp(ep), NULL,
-				 HZ * 10);
+				 PACKET_TIMEOUT);
 }
 
 static int vmk80xx_write_packet(struct comedi_device *dev, int cmd)
@@ -212,7 +214,7 @@ static int vmk80xx_write_packet(struct comedi_device *dev, int cmd)
 	pipe = usb_sndintpipe(usb, ep->bEndpointAddress);
 	return usb_interrupt_msg(usb, pipe, devpriv->usb_tx_buf,
 				 usb_endpoint_maxp(ep), NULL,
-				 HZ * 10);
+				 PACKET_TIMEOUT);
 }
 
 static int vmk80xx_reset_device(struct comedi_device *dev)
-- 
2.32.0


  parent reply	other threads:[~2021-10-25 11:46 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-25 11:45 [PATCH 0/5] comedi: misc fixes Johan Hovold
2021-10-25 11:45 ` [PATCH 1/5] comedi: ni_usb6501: fix NULL-deref in command paths Johan Hovold
2021-10-26 14:12   ` Ian Abbott
2021-10-27  8:54     ` Johan Hovold
2021-10-25 11:45 ` [PATCH 2/5] comedi: dt9812: fix DMA buffers on stack Johan Hovold
2021-10-26 14:27   ` Ian Abbott
2021-10-27  9:05     ` Johan Hovold
2021-10-25 11:45 ` [PATCH 3/5] comedi: vmk80xx: fix transfer-buffer overflows Johan Hovold
2021-10-26 14:32   ` Ian Abbott
2021-10-25 11:45 ` [PATCH 4/5] comedi: vmk80xx: fix bulk-buffer overflow Johan Hovold
2021-10-26 14:34   ` Ian Abbott
2021-10-25 11:45 ` Johan Hovold [this message]
2021-10-26 14:35   ` [PATCH 5/5] comedi: vmk80xx: fix bulk and interrupt message timeouts Ian Abbott

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211025114532.4599-6-johan@kernel.org \
    --to=johan@kernel.org \
    --cc=abbotti@mev.co.uk \
    --cc=gregkh@linuxfoundation.org \
    --cc=hsweeten@visionengravers.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --subject='Re: [PATCH 5/5] comedi: vmk80xx: fix bulk and interrupt message timeouts' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.