* [PATCH 0/4] Add support for the Cypress cyttsp5
@ 2021-10-25 11:42 ` Alistair Francis
0 siblings, 0 replies; 25+ messages in thread
From: Alistair Francis @ 2021-10-25 11:42 UTC (permalink / raw)
To: linux-arm-kernel, devicetree, linux-kernel, linux-input
Cc: andreas, alistair23, dmitry.torokhov, linus.walleij, robh+dt,
rydberg, mylene.josserand, Alistair Francis
This patch series builds on top of [1] and adds support for the cyttsp5
touchscreen controller for the reMarkable 2.
I first tried to add an I2C HID device. Although the cyttsp5 has some HID
looking aspects it is not HID compatible. Just in trying to probe the device
I found:
- The HID descriptor has extra padding
- The HID descriptor sets the high bytes of the descriptor length
- The HID descriptor has extra unrecognised tags
- The HID reset command doesn't appear to work
I don't think there is a way to use the I2C HID framework with the cyttsp5.
For anyone interested you can see the work here [2]. In that branch though I
can only obtain a HID descriptor, nothing else works without more core
changes.
So instead I rebased the series from [1]. Converted to the new yaml DTS
documentation, added regulator support and fixed a x/y miscalculation bug.
1: https://lwn.net/ml/linux-kernel/20180703094309.18514-1-mylene.josserand@bootlin.com/
2: https://github.com/alistair23/linux/commits/rM2-mainline-cyttsp5-hid
Alistair Francis (2):
ARM: imx_v6_v7_defconfig: Enable the cyttsp5 touchscreen
ARM: dts: imx7d: remarkable2: Enable the cyttsp5
Mylène Josserand (2):
Input: Add driver for Cypress Generation 5 touchscreen
Documentation: DT: bindings: input: Add documentation for cyttsp5
.../input/touchscreen/cypress,cyttsp5.yaml | 72 ++
arch/arm/boot/dts/imx7d-remarkable2.dts | 88 ++
arch/arm/configs/imx_v6_v7_defconfig | 1 +
drivers/input/touchscreen/Kconfig | 14 +
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/cyttsp5.c | 1129 +++++++++++++++++
6 files changed, 1305 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/cypress,cyttsp5.yaml
create mode 100644 drivers/input/touchscreen/cyttsp5.c
--
2.31.1
^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH 0/4] Add support for the Cypress cyttsp5
@ 2021-10-25 11:42 ` Alistair Francis
0 siblings, 0 replies; 25+ messages in thread
From: Alistair Francis @ 2021-10-25 11:42 UTC (permalink / raw)
To: linux-arm-kernel, devicetree, linux-kernel, linux-input
Cc: andreas, alistair23, dmitry.torokhov, linus.walleij, robh+dt,
rydberg, mylene.josserand, Alistair Francis
This patch series builds on top of [1] and adds support for the cyttsp5
touchscreen controller for the reMarkable 2.
I first tried to add an I2C HID device. Although the cyttsp5 has some HID
looking aspects it is not HID compatible. Just in trying to probe the device
I found:
- The HID descriptor has extra padding
- The HID descriptor sets the high bytes of the descriptor length
- The HID descriptor has extra unrecognised tags
- The HID reset command doesn't appear to work
I don't think there is a way to use the I2C HID framework with the cyttsp5.
For anyone interested you can see the work here [2]. In that branch though I
can only obtain a HID descriptor, nothing else works without more core
changes.
So instead I rebased the series from [1]. Converted to the new yaml DTS
documentation, added regulator support and fixed a x/y miscalculation bug.
1: https://lwn.net/ml/linux-kernel/20180703094309.18514-1-mylene.josserand@bootlin.com/
2: https://github.com/alistair23/linux/commits/rM2-mainline-cyttsp5-hid
Alistair Francis (2):
ARM: imx_v6_v7_defconfig: Enable the cyttsp5 touchscreen
ARM: dts: imx7d: remarkable2: Enable the cyttsp5
Mylène Josserand (2):
Input: Add driver for Cypress Generation 5 touchscreen
Documentation: DT: bindings: input: Add documentation for cyttsp5
.../input/touchscreen/cypress,cyttsp5.yaml | 72 ++
arch/arm/boot/dts/imx7d-remarkable2.dts | 88 ++
arch/arm/configs/imx_v6_v7_defconfig | 1 +
drivers/input/touchscreen/Kconfig | 14 +
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/cyttsp5.c | 1129 +++++++++++++++++
6 files changed, 1305 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/cypress,cyttsp5.yaml
create mode 100644 drivers/input/touchscreen/cyttsp5.c
--
2.31.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH 1/4] Input: Add driver for Cypress Generation 5 touchscreen
2021-10-25 11:42 ` Alistair Francis
@ 2021-10-25 11:42 ` Alistair Francis
-1 siblings, 0 replies; 25+ messages in thread
From: Alistair Francis @ 2021-10-25 11:42 UTC (permalink / raw)
To: linux-arm-kernel, devicetree, linux-kernel, linux-input
Cc: andreas, alistair23, dmitry.torokhov, linus.walleij, robh+dt,
rydberg, mylene.josserand, Mylène Josserand, Maxime Ripard,
Alistair Francis
From: Mylène Josserand <mylene.josserand@bootlin.com>
This is the basic driver for the Cypress TrueTouch Gen5 touchscreen
controllers. This driver supports only the I2C bus but it uses regmap
so SPI support could be added later.
The touchscreen can retrieve some defined zone that are handled as
buttons (according to the hardware). That is why it handles
button and multitouch events.
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Mylène Josserand <mylene.josserand@bootlin.com>
Message-Id: <20180703094309.18514-2-mylene.josserand@bootlin.com>
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
drivers/input/touchscreen/Kconfig | 14 +
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/cyttsp5.c | 1129 +++++++++++++++++++++++++++
3 files changed, 1144 insertions(+)
create mode 100644 drivers/input/touchscreen/cyttsp5.c
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index d4e74738c5a8..231cb0c1750b 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -284,6 +284,20 @@ config TOUCHSCREEN_CYTTSP4_SPI
To compile this driver as a module, choose M here: the
module will be called cyttsp4_spi.
+config TOUCHSCREEN_CYTTSP5
+ tristate "Cypress TrueTouch Gen5 Touchscreen Driver"
+ depends on OF
+ select REGMAP_I2C
+ select CRC_ITU_T
+ help
+ Driver for Parade TrueTouch Standard Product
+ Generation 5 touchscreen controllers.
+ I2C bus interface support only.
+ Say Y here if you have a Cypress Gen5 touchscreen.
+ If unsure, say N.
+ To compile this driver as a module, choose M here: the
+ module will be called cyttsp5.
+
config TOUCHSCREEN_DA9034
tristate "Touchscreen support for Dialog Semiconductor DA9034"
depends on PMIC_DA903X
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 7d34100f7f22..d4d6e56e70de 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_TOUCHSCREEN_CYTTSP_SPI) += cyttsp_spi.o
obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_CORE) += cyttsp4_core.o
obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_I2C) += cyttsp4_i2c.o cyttsp_i2c_common.o
obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_SPI) += cyttsp4_spi.o
+obj-$(CONFIG_TOUCHSCREEN_CYTTSP5) += cyttsp5.o
obj-$(CONFIG_TOUCHSCREEN_DA9034) += da9034-ts.o
obj-$(CONFIG_TOUCHSCREEN_DA9052) += da9052_tsi.o
obj-$(CONFIG_TOUCHSCREEN_DYNAPRO) += dynapro.o
diff --git a/drivers/input/touchscreen/cyttsp5.c b/drivers/input/touchscreen/cyttsp5.c
new file mode 100644
index 000000000000..9406dbb5af6d
--- /dev/null
+++ b/drivers/input/touchscreen/cyttsp5.c
@@ -0,0 +1,1129 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Parade TrueTouch(TM) Standard Product V5 Module.
+ *
+ * Copyright (C) 2015 Parade Technologies
+ * Copyright (C) 2012-2015 Cypress Semiconductor
+ * Copyright (C) 2018 Bootlin
+ *
+ * Authors: Mylène Josserand <mylene.josserand@bootlin.com>
+ * Alistair Francis <alistair@alistair23.me>
+ *
+ */
+
+#include <asm/unaligned.h>
+#include <linux/crc-itu-t.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+#define CYTTSP5_NAME "cyttsp5"
+#define CY_I2C_DATA_SIZE (2 * 256)
+#define HID_VERSION 0x0100
+#define CY_MAX_INPUT 512
+#define CYTTSP5_PREALLOCATED_CMD_BUFFER 32
+#define CY_BITS_PER_BTN 1
+#define CY_NUM_BTN_EVENT_ID ((1 << CY_BITS_PER_BTN) - 1)
+
+#define MAX_AREA 255
+#define HID_OUTPUT_BL_SOP 0x1
+#define HID_OUTPUT_BL_EOP 0x17
+#define HID_OUTPUT_BL_LAUNCH_APP 0x3B
+#define HID_OUTPUT_BL_LAUNCH_APP_SIZE 11
+#define HID_OUTPUT_GET_SYSINFO 0x2
+#define HID_OUTPUT_GET_SYSINFO_SIZE 5
+
+#define HID_DESC_REG 0x1
+#define HID_INPUT_REG 0x3
+#define HID_OUTPUT_REG 0x4
+
+#define REPORT_ID_TOUCH 0x1
+#define REPORT_ID_BTN 0x3
+#define REPORT_SIZE_5 5
+#define REPORT_SIZE_8 8
+#define REPORT_SIZE_16 16
+
+/* Touch reports offsets */
+/* Header offsets */
+#define TOUCH_REPORT_DESC_HDR_CONTACTCOUNT 16
+/* Record offsets */
+#define TOUCH_REPORT_DESC_CONTACTID 8
+#define TOUCH_REPORT_DESC_X 16
+#define TOUCH_REPORT_DESC_Y 32
+#define TOUCH_REPORT_DESC_P 48
+#define TOUCH_REPORT_DESC_MAJ 56
+#define TOUCH_REPORT_DESC_MIN 64
+
+/* HID */
+#define HID_TOUCH_REPORT_ID 0x1
+#define HID_BTN_REPORT_ID 0x3
+#define HID_APP_RESPONSE_REPORT_ID 0x1F
+#define HID_APP_OUTPUT_REPORT_ID 0x2F
+#define HID_BL_RESPONSE_REPORT_ID 0x30
+#define HID_BL_OUTPUT_REPORT_ID 0x40
+
+#define HID_OUTPUT_RESPONSE_REPORT_OFFSET 2
+#define HID_OUTPUT_RESPONSE_CMD_OFFSET 4
+#define HID_OUTPUT_RESPONSE_CMD_MASK 0x7F
+
+#define HID_SYSINFO_SENSING_OFFSET 33
+#define HID_SYSINFO_BTN_OFFSET 48
+#define HID_SYSINFO_BTN_MASK 0xFF
+#define HID_SYSINFO_MAX_BTN 8
+
+/* Timeout in ms */
+#define CY_HID_OUTPUT_TIMEOUT 200
+#define CY_HID_OUTPUT_GET_SYSINFO_TIMEOUT 3000
+#define CY_HID_GET_HID_DESCRIPTOR_TIMEOUT 4000
+
+/* maximum number of concurrent tracks */
+#define TOUCH_REPORT_SIZE 10
+#define TOUCH_INPUT_HEADER_SIZE 7
+#define BTN_REPORT_SIZE 9
+#define BTN_INPUT_HEADER_SIZE 5
+
+/* All usage pages for Touch Report */
+#define TOUCH_REPORT_USAGE_PG_X 0x00010030
+#define TOUCH_REPORT_USAGE_PG_Y 0x00010031
+#define TOUCH_REPORT_USAGE_PG_P 0x000D0030
+#define TOUCH_REPORT_USAGE_PG_CONTACTID 0x000D0051
+#define TOUCH_REPORT_USAGE_PG_CONTACTCOUNT 0x000D0054
+#define TOUCH_REPORT_USAGE_PG_MAJ 0xFF010062
+#define TOUCH_REPORT_USAGE_PG_MIN 0xFF010063
+#define TOUCH_COL_USAGE_PG 0x000D0022
+
+/* helpers */
+#define HI_BYTE(x) ((u8)(((x) >> 8) & 0xFF))
+#define LOW_BYTE(x) ((u8)((x) & 0xFF))
+
+/* System Information interface definitions */
+struct cyttsp5_sensing_conf_data_dev {
+ u8 electrodes_x;
+ u8 electrodes_y;
+ __le16 len_x;
+ __le16 len_y;
+ __le16 res_x;
+ __le16 res_y;
+ __le16 max_z;
+ u8 origin_x;
+ u8 origin_y;
+ u8 btn;
+ u8 scan_mode;
+ u8 max_num_of_tch_per_refresh_cycle;
+} __packed;
+
+struct cyttsp5_sensing_conf_data {
+ u16 res_x;
+ u16 res_y;
+ u16 max_z;
+ u16 len_x;
+ u16 len_y;
+ u8 origin_x;
+ u8 origin_y;
+ u8 max_tch;
+};
+
+enum hid_cmd_state {
+ HID_CMD_DONE,
+ HID_CMD_BUSY,
+};
+
+enum cyttsp5_tch_abs { /* for ordering within the extracted touch data array */
+ CY_TCH_X, /* X */
+ CY_TCH_Y, /* Y */
+ CY_TCH_P, /* P (Z) */
+ CY_TCH_T, /* TOUCH ID */
+ CY_TCH_MAJ, /* TOUCH_MAJOR */
+ CY_TCH_MIN, /* TOUCH_MINOR */
+ CY_TCH_NUM_ABS,
+};
+
+struct cyttsp5_tch_abs_params {
+ size_t ofs; /* abs byte offset */
+ size_t size; /* size in bits */
+ size_t min; /* min value */
+ size_t max; /* max value */
+ size_t bofs; /* bit offset */
+};
+
+struct cyttsp5_touch {
+ int hdr;
+ int abs[CY_TCH_NUM_ABS];
+};
+
+struct cyttsp5_sysinfo {
+ struct cyttsp5_sensing_conf_data sensing_conf_data;
+ int num_btns;
+ struct cyttsp5_tch_abs_params tch_hdr;
+ struct cyttsp5_tch_abs_params tch_abs[CY_TCH_NUM_ABS];
+ u32 key_code[HID_SYSINFO_MAX_BTN];
+ u8 *xy_mode;
+ u8 *xy_data;
+};
+
+struct cyttsp5_hid_desc {
+ __le16 hid_desc_len;
+ u8 packet_id;
+ u8 reserved_byte;
+ __le16 bcd_version;
+ __le16 report_desc_len;
+ __le16 report_desc_register;
+ __le16 input_register;
+ __le16 max_input_len;
+ __le16 output_register;
+ __le16 max_output_len;
+ __le16 command_register;
+ __le16 data_register;
+ __le16 vendor_id;
+ __le16 product_id;
+ __le16 version_id;
+ u8 reserved[4];
+} __packed;
+
+struct cyttsp5 {
+ struct device *dev;
+ struct mutex system_lock;
+ wait_queue_head_t wait_q;
+ struct cyttsp5_sysinfo sysinfo;
+ int hid_cmd_state;
+ struct cyttsp5_hid_desc hid_desc;
+ u8 cmd_buf[CYTTSP5_PREALLOCATED_CMD_BUFFER];
+ u8 input_buf[CY_MAX_INPUT];
+ u8 response_buf[CY_MAX_INPUT];
+ struct gpio_desc *reset_gpio;
+ struct input_dev *input;
+ char phys[NAME_MAX];
+ int num_prv_rec;
+ struct regmap *regmap;
+ struct touchscreen_properties prop;
+ struct regulator *vdd;
+};
+
+/*
+ * For what understood in the datasheet, the register does not
+ * matter. For consistency, used the Input Register address
+ * but it does mean anything to the device. The important data
+ * to send is the I2C address
+ */
+static int cyttsp5_read(struct cyttsp5 *ts, u8 *buf, u32 max)
+{
+ int rc;
+ u32 size;
+ u8 temp[2];
+
+ if (!buf)
+ return -EINVAL;
+
+ /* Read the frame to retrieve the size */
+ rc = regmap_bulk_read(ts->regmap, HID_INPUT_REG, temp, 2);
+ if (rc < 0)
+ return rc;
+
+ size = get_unaligned_le16(temp);
+ if (!size || size == 2)
+ return 0;
+
+ if (size > max)
+ return -EINVAL;
+
+ /* Get the real value */
+ return regmap_bulk_read(ts->regmap, HID_INPUT_REG, buf, size);
+}
+
+static int cyttsp5_write(struct cyttsp5 *ts, unsigned int reg, u8 *data,
+ size_t size)
+{
+ u8 cmd[size + 1];
+
+ /* High bytes of register address needed as first byte of cmd */
+ cmd[0] = HI_BYTE(reg);
+
+ /* Copy the rest of the data */
+ if (data)
+ memcpy(&cmd[1], data, size);
+
+ /* The hardware wants to receive a frame with the address register
+ * contains in the first two bytes. As the regmap_write function
+ * add the register adresse in the frame, we use the LOW_BYTE as
+ * first frame byte for the address register and the first
+ * data byte is the high register + left of the cmd to send
+ */
+ return regmap_bulk_write(ts->regmap, LOW_BYTE(reg), cmd, size + 1);
+}
+
+static void cyttsp5_final_sync(struct input_dev *input, int max_slots,
+ unsigned long *ids)
+{
+ int t;
+
+ for (t = 0; t < max_slots; t++) {
+ if (test_bit(t, ids))
+ continue;
+ input_mt_slot(input, t);
+ input_mt_report_slot_state(input, MT_TOOL_FINGER, false);
+ }
+
+ input_sync(input);
+}
+
+static void cyttsp5_report_slot_liftoff(struct cyttsp5 *ts, int max_slots)
+{
+ int t;
+
+ if (ts->num_prv_rec == 0)
+ return;
+
+ for (t = 0; t < max_slots; t++) {
+ input_mt_slot(ts->input, t);
+ input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, false);
+ }
+}
+
+static void cyttsp5_mt_lift_all(struct cyttsp5 *ts)
+{
+ struct cyttsp5_sysinfo *si = &ts->sysinfo;
+ int max = si->tch_abs[CY_TCH_T].max;
+
+ if (ts->num_prv_rec != 0) {
+ cyttsp5_report_slot_liftoff(ts, max);
+ input_sync(ts->input);
+ ts->num_prv_rec = 0;
+ }
+}
+
+static void cyttsp5_get_touch_axis(int *axis, int size, int max, u8 *xy_data,
+ int bofs)
+{
+ int nbyte;
+ int next;
+
+ for (nbyte = 0, *axis = 0, next = 0; nbyte < size; nbyte++)
+ *axis = *axis + ((xy_data[nbyte] >> bofs) << (nbyte * 8));
+
+ *axis &= max - 1;
+}
+
+static void cyttsp5_get_touch_record(struct cyttsp5 *ts,
+ struct cyttsp5_touch *touch, u8 *xy_data)
+{
+ struct cyttsp5_sysinfo *si = &ts->sysinfo;
+ enum cyttsp5_tch_abs abs;
+
+ for (abs = CY_TCH_X; abs < CY_TCH_NUM_ABS; abs++) {
+ cyttsp5_get_touch_axis(&touch->abs[abs],
+ si->tch_abs[abs].size,
+ si->tch_abs[abs].max,
+ xy_data + si->tch_abs[abs].ofs,
+ si->tch_abs[abs].bofs);
+ }
+}
+
+static void cyttsp5_get_mt_touches(struct cyttsp5 *ts,
+ struct cyttsp5_touch *tch, int num_cur_tch)
+{
+ struct cyttsp5_sysinfo *si = &ts->sysinfo;
+ int i, t = 0;
+ DECLARE_BITMAP(ids, si->tch_abs[CY_TCH_T].max);
+ u8 *tch_addr;
+ int tmp;
+
+ bitmap_zero(ids, si->tch_abs[CY_TCH_T].max);
+ memset(tch->abs, 0, sizeof(tch->abs));
+
+ for (i = 0; i < num_cur_tch; i++) {
+ tch_addr = si->xy_data + (i * TOUCH_REPORT_SIZE);
+ cyttsp5_get_touch_record(ts, tch, tch_addr);
+
+ /* Convert MAJOR/MINOR from mm to resolution */
+ tmp = tch->abs[CY_TCH_MAJ] * 100 * si->sensing_conf_data.res_x;
+ tch->abs[CY_TCH_MAJ] = tmp / si->sensing_conf_data.len_x;
+ tmp = tch->abs[CY_TCH_MIN] * 100 * si->sensing_conf_data.res_x;
+ tch->abs[CY_TCH_MIN] = tmp / si->sensing_conf_data.len_x;
+
+ t = tch->abs[CY_TCH_T];
+ input_mt_slot(ts->input, t);
+ input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, true);
+ __set_bit(t, ids);
+
+ /* position and pressure fields */
+ input_report_abs(ts->input, ABS_MT_POSITION_X,
+ tch->abs[CY_TCH_X]);
+ input_report_abs(ts->input, ABS_MT_POSITION_Y,
+ tch->abs[CY_TCH_Y]);
+ input_report_abs(ts->input, ABS_MT_PRESSURE,
+ tch->abs[CY_TCH_P]);
+
+ /* Get the extended touch fields */
+ input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR,
+ tch->abs[CY_TCH_MAJ]);
+ input_report_abs(ts->input, ABS_MT_TOUCH_MINOR,
+ tch->abs[CY_TCH_MIN]);
+
+ touchscreen_report_pos(ts->input, &ts->prop,
+ tch->abs[CY_TCH_X], tch->abs[CY_TCH_Y],
+ true);
+ }
+
+ cyttsp5_final_sync(ts->input, si->tch_abs[CY_TCH_T].max, ids);
+
+ ts->num_prv_rec = num_cur_tch;
+}
+
+/* read xy_data for all current touches */
+static int cyttsp5_xy_worker(struct cyttsp5 *ts)
+{
+ struct device *dev = ts->dev;
+ struct cyttsp5_sysinfo *si = &ts->sysinfo;
+ int max_tch = si->sensing_conf_data.max_tch;
+ struct cyttsp5_touch tch;
+ u8 num_cur_tch;
+
+ cyttsp5_get_touch_axis(&tch.hdr, si->tch_hdr.size,
+ si->tch_hdr.max,
+ si->xy_mode + 3 + si->tch_hdr.ofs,
+ si->tch_hdr.bofs);
+
+ num_cur_tch = tch.hdr;
+ if (num_cur_tch > max_tch) {
+ dev_err(dev, "Num touch err detected (n=%d)\n", num_cur_tch);
+ num_cur_tch = max_tch;
+ }
+
+ if (num_cur_tch == 0 && ts->num_prv_rec == 0)
+ return 0;
+
+ /* extract xy_data for all currently reported touches */
+ if (num_cur_tch)
+ cyttsp5_get_mt_touches(ts, &tch, num_cur_tch);
+ else
+ cyttsp5_mt_lift_all(ts);
+
+ return 0;
+}
+
+static int cyttsp5_mt_attention(struct device *dev)
+{
+ struct cyttsp5 *ts = dev_get_drvdata(dev);
+ struct cyttsp5_sysinfo *si = &ts->sysinfo;
+ int rc;
+
+ if (si->xy_mode[2] != HID_TOUCH_REPORT_ID)
+ return 0;
+
+ /* core handles handshake */
+ rc = cyttsp5_xy_worker(ts);
+ if (rc < 0)
+ dev_err(dev, "xy_worker error r=%d\n", rc);
+
+ return rc;
+}
+
+static int cyttsp5_setup_input_device(struct device *dev)
+{
+ struct cyttsp5 *ts = dev_get_drvdata(dev);
+ struct cyttsp5_sysinfo *si = &ts->sysinfo;
+ int max_x, max_y, max_p;
+ int max_x_tmp, max_y_tmp;
+ int rc;
+
+ __set_bit(EV_ABS, ts->input->evbit);
+ __set_bit(EV_REL, ts->input->evbit);
+ __set_bit(EV_KEY, ts->input->evbit);
+
+ max_x_tmp = si->sensing_conf_data.res_x;
+ max_y_tmp = si->sensing_conf_data.res_y;
+ max_x = max_x_tmp - 1;
+ max_y = max_y_tmp - 1;
+ max_p = si->sensing_conf_data.max_z;
+
+ input_mt_init_slots(ts->input, si->tch_abs[CY_TCH_T].max, 0);
+
+ __set_bit(ABS_MT_POSITION_X, ts->input->absbit);
+ __set_bit(ABS_MT_POSITION_Y, ts->input->absbit);
+ __set_bit(ABS_MT_PRESSURE, ts->input->absbit);
+
+ input_set_abs_params(ts->input, ABS_MT_POSITION_X, 0, max_x, 0, 0);
+ input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, max_y, 0, 0);
+ input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, max_p, 0, 0);
+
+ input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, MAX_AREA, 0, 0);
+ input_set_abs_params(ts->input, ABS_MT_TOUCH_MINOR, 0, MAX_AREA, 0, 0);
+
+ rc = input_register_device(ts->input);
+ if (rc < 0)
+ dev_err(dev, "Error, failed register input device r=%d\n", rc);
+
+ return rc;
+}
+
+#ifdef CONFIG_OF
+static int cyttsp5_parse_dt_key_code(struct device *dev)
+{
+ struct cyttsp5 *ts = dev_get_drvdata(dev);
+ struct cyttsp5_sysinfo *si = &ts->sysinfo;
+ struct device_node *np;
+ int i;
+
+ np = dev->of_node;
+ if (!np)
+ return -EINVAL;
+
+ if (!si->num_btns)
+ return 0;
+
+ /* Initialize the button to RESERVED */
+ for (i = 0; i < si->num_btns; i++)
+ si->key_code[i] = KEY_RESERVED;
+
+ return of_property_read_u32_array(np, "linux,keycodes",
+ si->key_code, si->num_btns);
+}
+#else
+static int cyttsp5_parse_dt_key_code(struct device *dev)
+{
+ struct cyttsp5 *ts = dev_get_drvdata(dev);
+ struct cyttsp5_sysinfo *si = &ts->sysinfo;
+ int i;
+
+ if (!si->num_btns)
+ return 0;
+
+ /* Initialize the button to RESERVED */
+ for (i = 0; i < si->num_btns; i++)
+ si->key_code[i] = KEY_RESERVED;
+
+ return 0;
+}
+#endif
+
+static int cyttsp5_btn_attention(struct device *dev)
+{
+ struct cyttsp5 *ts = dev_get_drvdata(dev);
+ struct cyttsp5_sysinfo *si = &ts->sysinfo;
+ int cur_btn;
+ int cur_btn_state;
+
+ if (si->xy_mode[2] != HID_BTN_REPORT_ID || !si->num_btns)
+ return 0;
+
+ /* extract button press/release touch information */
+ for (cur_btn = 0; cur_btn < si->num_btns; cur_btn++) {
+ /* Get current button state */
+ cur_btn_state = (si->xy_data[0] >> (cur_btn * CY_BITS_PER_BTN))
+ & CY_NUM_BTN_EVENT_ID;
+
+ input_report_key(ts->input, si->key_code[cur_btn],
+ cur_btn_state);
+ input_sync(ts->input);
+ }
+
+ return 0;
+}
+
+static u16 cyttsp5_compute_crc(u8 *buf, u32 size)
+{
+ u16 remainder = 0xFFFF;
+ u16 xor_mask = 0x0000;
+ u32 index;
+ u32 byte_value;
+ u32 table_index;
+ u32 crc_bit_width = sizeof(u16) * 8;
+
+ /* Divide the message by polynomial, via the table. */
+ for (index = 0; index < size; index++) {
+ byte_value = buf[index];
+ table_index = ((byte_value >> 4) & 0x0F)
+ ^ (remainder >> (crc_bit_width - 4));
+ remainder = crc_itu_t_table[table_index]
+ ^ (remainder << 4);
+ table_index = (byte_value & 0x0F)
+ ^ (remainder >> (crc_bit_width - 4));
+ remainder = crc_itu_t_table[table_index]
+ ^ (remainder << 4);
+ }
+
+ /* Perform the final remainder CRC. */
+ return remainder ^ xor_mask;
+}
+
+static int cyttsp5_validate_cmd_response(struct cyttsp5 *ts, u8 code)
+{
+ u16 size, crc;
+ u8 status, offset;
+ int command_code;
+
+ size = get_unaligned_le16(&ts->response_buf[0]);
+
+ if (!size)
+ return 0;
+
+ offset = ts->response_buf[HID_OUTPUT_RESPONSE_REPORT_OFFSET];
+
+ if (offset == HID_BL_RESPONSE_REPORT_ID) {
+ if (ts->response_buf[4] != HID_OUTPUT_BL_SOP) {
+ dev_err(ts->dev, "HID output response, wrong SOP\n");
+ return -EPROTO;
+ }
+
+ if (ts->response_buf[size - 1] != HID_OUTPUT_BL_EOP) {
+ dev_err(ts->dev, "HID output response, wrong EOP\n");
+ return -EPROTO;
+ }
+
+ crc = cyttsp5_compute_crc(&ts->response_buf[4], size - 7);
+ if (ts->response_buf[size - 3] != LOW_BYTE(crc) ||
+ ts->response_buf[size - 2] != HI_BYTE(crc)) {
+ dev_err(ts->dev, "HID output response, wrong CRC 0x%X\n",
+ crc);
+ return -EPROTO;
+ }
+
+ status = ts->response_buf[5];
+ if (status) {
+ dev_err(ts->dev, "HID output response, ERROR:%d\n",
+ status);
+ return -EPROTO;
+ }
+ }
+
+ if (offset == HID_APP_RESPONSE_REPORT_ID) {
+ command_code = ts->response_buf[HID_OUTPUT_RESPONSE_CMD_OFFSET]
+ & HID_OUTPUT_RESPONSE_CMD_MASK;
+ if (command_code != code) {
+ dev_err(ts->dev,
+ "HID output response, wrong command_code:%X\n",
+ command_code);
+ return -EPROTO;
+ }
+ }
+
+ return 0;
+}
+
+static void cyttsp5_si_get_btn_data(struct cyttsp5 *ts)
+{
+ struct cyttsp5_sysinfo *si = &ts->sysinfo;
+ int i;
+ unsigned int btns = ts->response_buf[HID_SYSINFO_BTN_OFFSET]
+ & HID_SYSINFO_BTN_MASK;
+
+ si->num_btns = 0;
+ for (i = 0; i < HID_SYSINFO_MAX_BTN; i++) {
+ if (btns & BIT(i))
+ si->num_btns++;
+ }
+}
+
+static int cyttsp5_get_sysinfo_regs(struct cyttsp5 *ts)
+{
+ struct cyttsp5_sensing_conf_data *scd = &ts->sysinfo.sensing_conf_data;
+ struct cyttsp5_sensing_conf_data_dev *scd_dev =
+ (struct cyttsp5_sensing_conf_data_dev *)
+ &ts->response_buf[HID_SYSINFO_SENSING_OFFSET];
+ struct cyttsp5_sysinfo *si = &ts->sysinfo;
+
+ cyttsp5_si_get_btn_data(ts);
+
+ scd->max_tch = scd_dev->max_num_of_tch_per_refresh_cycle;
+ scd->res_x = get_unaligned_le16(&scd_dev->res_x);
+ scd->res_y = get_unaligned_le16(&scd_dev->res_y);
+ scd->max_z = get_unaligned_le16(&scd_dev->max_z);
+ scd->len_x = get_unaligned_le16(&scd_dev->len_x);
+ scd->len_y = get_unaligned_le16(&scd_dev->len_y);
+
+ si->xy_data = devm_kzalloc(ts->dev, scd->max_tch * TOUCH_REPORT_SIZE,
+ GFP_KERNEL);
+ if (!si->xy_data)
+ return -ENOMEM;
+
+ si->xy_mode = devm_kzalloc(ts->dev, TOUCH_INPUT_HEADER_SIZE,
+ GFP_KERNEL);
+ if (!si->xy_mode)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static int cyttsp5_hid_output_get_sysinfo(struct cyttsp5 *ts)
+{
+ int rc;
+ u8 cmd[HID_OUTPUT_GET_SYSINFO_SIZE];
+
+ ts->hid_cmd_state = HID_CMD_BUSY;
+
+ /* HI bytes of Output register address */
+ cmd[0] = LOW_BYTE(HID_OUTPUT_GET_SYSINFO_SIZE);
+ cmd[1] = HI_BYTE(HID_OUTPUT_GET_SYSINFO_SIZE);
+ cmd[2] = HID_APP_OUTPUT_REPORT_ID;
+ cmd[3] = 0x0; /* Reserved */
+ cmd[4] = HID_OUTPUT_GET_SYSINFO;
+
+ rc = cyttsp5_write(ts, HID_OUTPUT_REG, cmd,
+ HID_OUTPUT_GET_SYSINFO_SIZE);
+ if (rc) {
+ dev_err(ts->dev, "Failed to write command %d", rc);
+ goto error;
+ }
+
+ rc = wait_event_timeout(ts->wait_q, (ts->hid_cmd_state == HID_CMD_DONE),
+ msecs_to_jiffies(CY_HID_OUTPUT_GET_SYSINFO_TIMEOUT));
+ if (!rc) {
+ dev_err(ts->dev, "HID output cmd execution timed out\n");
+ rc = -ETIME;
+ goto error;
+ }
+
+ rc = cyttsp5_validate_cmd_response(ts, HID_OUTPUT_GET_SYSINFO);
+ if (rc) {
+ dev_err(ts->dev, "Validation of the response failed\n");
+ goto error;
+ }
+
+ return cyttsp5_get_sysinfo_regs(ts);
+
+error:
+ mutex_lock(&ts->system_lock);
+ ts->hid_cmd_state = HID_CMD_DONE;
+ mutex_unlock(&ts->system_lock);
+ return rc;
+}
+
+static int cyttsp5_hid_output_bl_launch_app(struct cyttsp5 *ts)
+{
+ int rc;
+ u8 cmd[HID_OUTPUT_BL_LAUNCH_APP];
+ u16 crc;
+
+ mutex_lock(&ts->system_lock);
+ ts->hid_cmd_state = HID_CMD_BUSY;
+ mutex_unlock(&ts->system_lock);
+
+ cmd[0] = LOW_BYTE(HID_OUTPUT_BL_LAUNCH_APP_SIZE);
+ cmd[1] = HI_BYTE(HID_OUTPUT_BL_LAUNCH_APP_SIZE);
+ cmd[2] = HID_BL_OUTPUT_REPORT_ID;
+ cmd[3] = 0x0; /* Reserved */
+ cmd[4] = HID_OUTPUT_BL_SOP;
+ cmd[5] = HID_OUTPUT_BL_LAUNCH_APP;
+ cmd[6] = 0x0; /* Low bytes of data */
+ cmd[7] = 0x0; /* Hi bytes of data */
+ crc = cyttsp5_compute_crc(&cmd[4], 4);
+ cmd[8] = LOW_BYTE(crc);
+ cmd[9] = HI_BYTE(crc);
+ cmd[10] = HID_OUTPUT_BL_EOP;
+
+ rc = cyttsp5_write(ts, HID_OUTPUT_REG, cmd,
+ HID_OUTPUT_BL_LAUNCH_APP_SIZE);
+ if (rc) {
+ dev_err(ts->dev, "Failed to write command %d", rc);
+ goto error;
+ }
+
+ rc = wait_event_timeout(ts->wait_q, (ts->hid_cmd_state == HID_CMD_DONE),
+ msecs_to_jiffies(CY_HID_OUTPUT_TIMEOUT));
+ if (!rc) {
+ dev_err(ts->dev, "HID output cmd execution timed out\n");
+ rc = -ETIME;
+ goto error;
+ }
+
+ rc = cyttsp5_validate_cmd_response(ts, HID_OUTPUT_BL_LAUNCH_APP);
+ if (rc) {
+ dev_err(ts->dev, "Validation of the response failed\n");
+ goto error;
+ }
+
+ return rc;
+
+error:
+ mutex_lock(&ts->system_lock);
+ ts->hid_cmd_state = HID_CMD_DONE;
+ mutex_unlock(&ts->system_lock);
+
+ return rc;
+}
+
+static int cyttsp5_get_hid_descriptor(struct cyttsp5 *ts,
+ struct cyttsp5_hid_desc *desc)
+{
+ struct device *dev = ts->dev;
+ __le16 hid_desc_register = HID_DESC_REG;
+ int rc;
+ u8 cmd[2];
+
+ /* Read HID descriptor length and version */
+ mutex_lock(&ts->system_lock);
+ ts->hid_cmd_state = HID_CMD_BUSY;
+ mutex_unlock(&ts->system_lock);
+
+ /* Set HID descriptor register */
+ memcpy(cmd, &hid_desc_register, sizeof(hid_desc_register));
+
+ rc = cyttsp5_write(ts, HID_DESC_REG, NULL, 0);
+ if (rc < 0) {
+ dev_err(dev, "Failed to get HID descriptor, rc=%d\n", rc);
+ goto error;
+ }
+
+ rc = wait_event_timeout(ts->wait_q, (ts->hid_cmd_state == HID_CMD_DONE),
+ msecs_to_jiffies(CY_HID_GET_HID_DESCRIPTOR_TIMEOUT));
+ if (!rc) {
+ dev_err(ts->dev, "HID get descriptor timed out\n");
+ rc = -ETIME;
+ goto error;
+ }
+
+ memcpy(desc, ts->response_buf, sizeof(struct cyttsp5_hid_desc));
+
+ /* Check HID descriptor length and version */
+ if (le16_to_cpu(desc->hid_desc_len) != sizeof(*desc) ||
+ le16_to_cpu(desc->bcd_version) != HID_VERSION) {
+ dev_err(dev, "Unsupported HID version\n");
+ return -ENODEV;
+ }
+
+ goto exit;
+
+error:
+ mutex_lock(&ts->system_lock);
+ ts->hid_cmd_state = HID_CMD_DONE;
+ mutex_unlock(&ts->system_lock);
+exit:
+ return rc;
+}
+
+static int fill_tch_abs(struct cyttsp5_tch_abs_params *tch_abs, int report_size,
+ int offset)
+{
+ tch_abs->ofs = offset / 8;
+ tch_abs->size = report_size / 8;
+ if (report_size % 8)
+ tch_abs->size += 1;
+ tch_abs->min = 0;
+ tch_abs->max = 1 << report_size;
+ tch_abs->bofs = offset - (tch_abs->ofs << 3);
+
+ return 0;
+}
+
+static int move_button_data(struct cyttsp5 *ts, struct cyttsp5_sysinfo *si)
+{
+ memcpy(si->xy_mode, ts->input_buf, BTN_INPUT_HEADER_SIZE);
+ memcpy(si->xy_data, &ts->input_buf[BTN_INPUT_HEADER_SIZE],
+ BTN_REPORT_SIZE);
+
+ return 0;
+}
+
+static int move_touch_data(struct cyttsp5 *ts, struct cyttsp5_sysinfo *si)
+{
+ int max_tch = si->sensing_conf_data.max_tch;
+ int num_cur_tch;
+ int length;
+ struct cyttsp5_tch_abs_params *tch = &si->tch_hdr;
+
+ memcpy(si->xy_mode, ts->input_buf, TOUCH_INPUT_HEADER_SIZE);
+
+ cyttsp5_get_touch_axis(&num_cur_tch, tch->size,
+ tch->max, si->xy_mode + 3 + tch->ofs, tch->bofs);
+ if (unlikely(num_cur_tch > max_tch))
+ num_cur_tch = max_tch;
+
+ length = num_cur_tch * TOUCH_REPORT_SIZE;
+
+ memcpy(si->xy_data, &ts->input_buf[TOUCH_INPUT_HEADER_SIZE], length);
+
+ return 0;
+}
+
+static irqreturn_t cyttsp5_handle_irq(int irq, void *handle)
+{
+ struct cyttsp5 *ts = handle;
+ int report_id;
+ int size;
+ int rc;
+
+ rc = cyttsp5_read(ts, ts->input_buf, CY_MAX_INPUT);
+ if (rc)
+ return IRQ_HANDLED;
+
+ size = get_unaligned_le16(&ts->input_buf[0]);
+
+ /* check reset */
+ if (size == 0) {
+ memcpy(ts->response_buf, ts->input_buf, 2);
+
+ mutex_lock(&ts->system_lock);
+ ts->hid_cmd_state = HID_CMD_DONE;
+ mutex_unlock(&ts->system_lock);
+ wake_up(&ts->wait_q);
+ return IRQ_HANDLED;
+ }
+
+ report_id = ts->input_buf[2];
+
+ if (report_id == HID_TOUCH_REPORT_ID) {
+ move_touch_data(ts, &ts->sysinfo);
+ cyttsp5_mt_attention(ts->dev);
+ } else if (report_id == HID_BTN_REPORT_ID) {
+ move_button_data(ts, &ts->sysinfo);
+ cyttsp5_btn_attention(ts->dev);
+ } else {
+ /* It is not an input but a command response */
+ memcpy(ts->response_buf, ts->input_buf, size);
+
+ mutex_lock(&ts->system_lock);
+ ts->hid_cmd_state = HID_CMD_DONE;
+ mutex_unlock(&ts->system_lock);
+ wake_up(&ts->wait_q);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int cyttsp5_deassert_int(struct cyttsp5 *ts)
+{
+ u16 size;
+ u8 buf[2];
+ int rc;
+
+ rc = regmap_bulk_read(ts->regmap, HID_INPUT_REG, buf, 2);
+ if (rc < 0)
+ return rc;
+
+ size = get_unaligned_le16(&buf[0]);
+ if (size == 2 || size == 0)
+ return 0;
+
+ return -EINVAL;
+}
+
+static int cyttsp5_fill_all_touch(struct cyttsp5 *ts)
+{
+ struct cyttsp5_sysinfo *si = &ts->sysinfo;
+
+ fill_tch_abs(&si->tch_abs[CY_TCH_X], REPORT_SIZE_16,
+ TOUCH_REPORT_DESC_X);
+ fill_tch_abs(&si->tch_abs[CY_TCH_Y], REPORT_SIZE_16,
+ TOUCH_REPORT_DESC_Y);
+ fill_tch_abs(&si->tch_abs[CY_TCH_P], REPORT_SIZE_8,
+ TOUCH_REPORT_DESC_P);
+ fill_tch_abs(&si->tch_abs[CY_TCH_T], REPORT_SIZE_5,
+ TOUCH_REPORT_DESC_CONTACTID);
+ fill_tch_abs(&si->tch_hdr, REPORT_SIZE_5,
+ TOUCH_REPORT_DESC_HDR_CONTACTCOUNT);
+ fill_tch_abs(&si->tch_abs[CY_TCH_MAJ], REPORT_SIZE_8,
+ TOUCH_REPORT_DESC_MAJ);
+ fill_tch_abs(&si->tch_abs[CY_TCH_MIN], REPORT_SIZE_8,
+ TOUCH_REPORT_DESC_MIN);
+
+ return 0;
+}
+
+static int cyttsp5_startup(struct cyttsp5 *ts)
+{
+ int rc;
+
+ rc = cyttsp5_deassert_int(ts);
+ if (rc) {
+ dev_err(ts->dev, "Error on deassert int r=%d\n", rc);
+ return -ENODEV;
+ }
+
+ /*
+ * Launch the application as the device starts in bootloader mode
+ * because of a power-on-reset
+ */
+ rc = cyttsp5_hid_output_bl_launch_app(ts);
+ if (rc < 0) {
+ dev_err(ts->dev, "Error on launch app r=%d\n", rc);
+ return rc;
+ }
+
+ rc = cyttsp5_get_hid_descriptor(ts, &ts->hid_desc);
+ if (rc < 0) {
+ dev_err(ts->dev, "Error on getting HID descriptor r=%d\n", rc);
+ return rc;
+ }
+
+ rc = cyttsp5_fill_all_touch(ts);
+ if (rc < 0) {
+ dev_err(ts->dev, "Error on report descriptor r=%d\n", rc);
+ return rc;
+ }
+
+ rc = cyttsp5_hid_output_get_sysinfo(ts);
+ if (rc) {
+ dev_err(ts->dev, "Error on getting sysinfo r=%d\n", rc);
+ return rc;
+ }
+
+ return rc;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id cyttsp5_of_match[] = {
+ { .compatible = "cypress,cyttsp5", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, cyttsp5_of_match);
+#endif
+
+static const struct i2c_device_id cyttsp5_i2c_id[] = {
+ { CYTTSP5_NAME, 0, },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, cyttsp5_i2c_id);
+
+static int cyttsp5_probe(struct device *dev, struct regmap *regmap, int irq,
+ const char *name)
+{
+ struct cyttsp5 *ts;
+ struct cyttsp5_sysinfo *si;
+ int rc = 0, i;
+
+ ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
+ if (!ts)
+ return -ENOMEM;
+
+ /* Initialize device info */
+ ts->regmap = regmap;
+ ts->dev = dev;
+ si = &ts->sysinfo;
+ dev_set_drvdata(dev, ts);
+
+ /* Initialize mutexes and spinlocks */
+ mutex_init(&ts->system_lock);
+
+ /* Initialize wait queue */
+ init_waitqueue_head(&ts->wait_q);
+
+ /* Power up the device */
+ ts->vdd = regulator_get(dev, "vdd");
+ if (IS_ERR(ts->vdd)) {
+ rc = PTR_ERR(ts->vdd);
+ dev_set_drvdata(dev, NULL);
+ kfree(ts);
+ return rc;
+ }
+
+ rc = regulator_enable(ts->vdd);
+ if (rc) {
+ regulator_put(ts->vdd);
+ dev_set_drvdata(dev, NULL);
+ kfree(ts);
+ return rc;
+ }
+
+ /* Reset the gpio to be in a reset state */
+ ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(ts->reset_gpio)) {
+ rc = PTR_ERR(ts->reset_gpio);
+ dev_err(dev, "Failed to request reset gpio, error %d\n", rc);
+ return rc;
+ }
+ gpiod_set_value(ts->reset_gpio, 1);
+
+ /* Need a delay to have device up */
+ msleep(20);
+
+ rc = devm_request_threaded_irq(dev, irq, NULL, cyttsp5_handle_irq,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ name, ts);
+ if (rc) {
+ dev_err(dev, "unable to request IRQ\n");
+ return rc;
+ }
+
+ rc = cyttsp5_startup(ts);
+ if (rc) {
+ dev_err(ts->dev, "Fail initial startup r=%d\n", rc);
+ return rc;
+ }
+
+ rc = cyttsp5_parse_dt_key_code(dev);
+ if (rc < 0) {
+ dev_err(ts->dev, "Error while parsing dts %d\n", rc);
+ return rc;
+ }
+
+ ts->input = devm_input_allocate_device(dev);
+ if (!ts->input) {
+ dev_err(dev, "Error, failed to allocate input device\n");
+ return -ENODEV;
+ }
+
+ ts->input->name = "cyttsp5";
+ scnprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev));
+ ts->input->phys = ts->phys;
+ ts->input->dev.parent = ts->dev;
+ input_set_drvdata(ts->input, ts);
+
+ touchscreen_parse_properties(ts->input, true, &ts->prop);
+
+ __set_bit(EV_KEY, ts->input->evbit);
+ __set_bit(ABS_X, ts->input->absbit);
+ __set_bit(ABS_Y, ts->input->absbit);
+ __set_bit(BTN_TOUCH, ts->input->keybit);
+ for (i = 0; i < si->num_btns; i++)
+ __set_bit(si->key_code[i], ts->input->keybit);
+
+ return cyttsp5_setup_input_device(dev);
+}
+
+static int cyttsp5_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct regmap *regmap;
+ static const struct regmap_config config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ };
+
+ regmap = devm_regmap_init_i2c(client, &config);
+ if (IS_ERR(regmap)) {
+ dev_err(&client->dev, "regmap allocation failed: %ld\n",
+ PTR_ERR(regmap));
+ return PTR_ERR(regmap);
+ }
+
+ return cyttsp5_probe(&client->dev, regmap, client->irq, client->name);
+}
+
+static int cyttsp5_remove(struct device *dev)
+{
+ struct cyttsp5 *ts = dev_get_drvdata(dev);
+
+ input_unregister_device(ts->input);
+
+ return 0;
+}
+
+static int cyttsp5_i2c_remove(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+
+ return cyttsp5_remove(dev);
+}
+
+static struct i2c_driver cyttsp5_i2c_driver = {
+ .driver = {
+ .name = CYTTSP5_NAME,
+ .of_match_table = of_match_ptr(cyttsp5_of_match),
+ },
+ .probe = cyttsp5_i2c_probe,
+ .remove = cyttsp5_i2c_remove,
+ .id_table = cyttsp5_i2c_id,
+};
+
+module_i2c_driver(cyttsp5_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Touchscreen driver for Cypress TrueTouch Gen 5 Product");
+MODULE_AUTHOR("Mylène Josserand <mylene.josserand@bootlin.com>");
--
2.31.1
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 1/4] Input: Add driver for Cypress Generation 5 touchscreen
@ 2021-10-25 11:42 ` Alistair Francis
0 siblings, 0 replies; 25+ messages in thread
From: Alistair Francis @ 2021-10-25 11:42 UTC (permalink / raw)
To: linux-arm-kernel, devicetree, linux-kernel, linux-input
Cc: andreas, alistair23, dmitry.torokhov, linus.walleij, robh+dt,
rydberg, mylene.josserand, Mylène Josserand, Maxime Ripard,
Alistair Francis
From: Mylène Josserand <mylene.josserand@bootlin.com>
This is the basic driver for the Cypress TrueTouch Gen5 touchscreen
controllers. This driver supports only the I2C bus but it uses regmap
so SPI support could be added later.
The touchscreen can retrieve some defined zone that are handled as
buttons (according to the hardware). That is why it handles
button and multitouch events.
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Mylène Josserand <mylene.josserand@bootlin.com>
Message-Id: <20180703094309.18514-2-mylene.josserand@bootlin.com>
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
drivers/input/touchscreen/Kconfig | 14 +
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/cyttsp5.c | 1129 +++++++++++++++++++++++++++
3 files changed, 1144 insertions(+)
create mode 100644 drivers/input/touchscreen/cyttsp5.c
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index d4e74738c5a8..231cb0c1750b 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -284,6 +284,20 @@ config TOUCHSCREEN_CYTTSP4_SPI
To compile this driver as a module, choose M here: the
module will be called cyttsp4_spi.
+config TOUCHSCREEN_CYTTSP5
+ tristate "Cypress TrueTouch Gen5 Touchscreen Driver"
+ depends on OF
+ select REGMAP_I2C
+ select CRC_ITU_T
+ help
+ Driver for Parade TrueTouch Standard Product
+ Generation 5 touchscreen controllers.
+ I2C bus interface support only.
+ Say Y here if you have a Cypress Gen5 touchscreen.
+ If unsure, say N.
+ To compile this driver as a module, choose M here: the
+ module will be called cyttsp5.
+
config TOUCHSCREEN_DA9034
tristate "Touchscreen support for Dialog Semiconductor DA9034"
depends on PMIC_DA903X
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 7d34100f7f22..d4d6e56e70de 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_TOUCHSCREEN_CYTTSP_SPI) += cyttsp_spi.o
obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_CORE) += cyttsp4_core.o
obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_I2C) += cyttsp4_i2c.o cyttsp_i2c_common.o
obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_SPI) += cyttsp4_spi.o
+obj-$(CONFIG_TOUCHSCREEN_CYTTSP5) += cyttsp5.o
obj-$(CONFIG_TOUCHSCREEN_DA9034) += da9034-ts.o
obj-$(CONFIG_TOUCHSCREEN_DA9052) += da9052_tsi.o
obj-$(CONFIG_TOUCHSCREEN_DYNAPRO) += dynapro.o
diff --git a/drivers/input/touchscreen/cyttsp5.c b/drivers/input/touchscreen/cyttsp5.c
new file mode 100644
index 000000000000..9406dbb5af6d
--- /dev/null
+++ b/drivers/input/touchscreen/cyttsp5.c
@@ -0,0 +1,1129 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Parade TrueTouch(TM) Standard Product V5 Module.
+ *
+ * Copyright (C) 2015 Parade Technologies
+ * Copyright (C) 2012-2015 Cypress Semiconductor
+ * Copyright (C) 2018 Bootlin
+ *
+ * Authors: Mylène Josserand <mylene.josserand@bootlin.com>
+ * Alistair Francis <alistair@alistair23.me>
+ *
+ */
+
+#include <asm/unaligned.h>
+#include <linux/crc-itu-t.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+#define CYTTSP5_NAME "cyttsp5"
+#define CY_I2C_DATA_SIZE (2 * 256)
+#define HID_VERSION 0x0100
+#define CY_MAX_INPUT 512
+#define CYTTSP5_PREALLOCATED_CMD_BUFFER 32
+#define CY_BITS_PER_BTN 1
+#define CY_NUM_BTN_EVENT_ID ((1 << CY_BITS_PER_BTN) - 1)
+
+#define MAX_AREA 255
+#define HID_OUTPUT_BL_SOP 0x1
+#define HID_OUTPUT_BL_EOP 0x17
+#define HID_OUTPUT_BL_LAUNCH_APP 0x3B
+#define HID_OUTPUT_BL_LAUNCH_APP_SIZE 11
+#define HID_OUTPUT_GET_SYSINFO 0x2
+#define HID_OUTPUT_GET_SYSINFO_SIZE 5
+
+#define HID_DESC_REG 0x1
+#define HID_INPUT_REG 0x3
+#define HID_OUTPUT_REG 0x4
+
+#define REPORT_ID_TOUCH 0x1
+#define REPORT_ID_BTN 0x3
+#define REPORT_SIZE_5 5
+#define REPORT_SIZE_8 8
+#define REPORT_SIZE_16 16
+
+/* Touch reports offsets */
+/* Header offsets */
+#define TOUCH_REPORT_DESC_HDR_CONTACTCOUNT 16
+/* Record offsets */
+#define TOUCH_REPORT_DESC_CONTACTID 8
+#define TOUCH_REPORT_DESC_X 16
+#define TOUCH_REPORT_DESC_Y 32
+#define TOUCH_REPORT_DESC_P 48
+#define TOUCH_REPORT_DESC_MAJ 56
+#define TOUCH_REPORT_DESC_MIN 64
+
+/* HID */
+#define HID_TOUCH_REPORT_ID 0x1
+#define HID_BTN_REPORT_ID 0x3
+#define HID_APP_RESPONSE_REPORT_ID 0x1F
+#define HID_APP_OUTPUT_REPORT_ID 0x2F
+#define HID_BL_RESPONSE_REPORT_ID 0x30
+#define HID_BL_OUTPUT_REPORT_ID 0x40
+
+#define HID_OUTPUT_RESPONSE_REPORT_OFFSET 2
+#define HID_OUTPUT_RESPONSE_CMD_OFFSET 4
+#define HID_OUTPUT_RESPONSE_CMD_MASK 0x7F
+
+#define HID_SYSINFO_SENSING_OFFSET 33
+#define HID_SYSINFO_BTN_OFFSET 48
+#define HID_SYSINFO_BTN_MASK 0xFF
+#define HID_SYSINFO_MAX_BTN 8
+
+/* Timeout in ms */
+#define CY_HID_OUTPUT_TIMEOUT 200
+#define CY_HID_OUTPUT_GET_SYSINFO_TIMEOUT 3000
+#define CY_HID_GET_HID_DESCRIPTOR_TIMEOUT 4000
+
+/* maximum number of concurrent tracks */
+#define TOUCH_REPORT_SIZE 10
+#define TOUCH_INPUT_HEADER_SIZE 7
+#define BTN_REPORT_SIZE 9
+#define BTN_INPUT_HEADER_SIZE 5
+
+/* All usage pages for Touch Report */
+#define TOUCH_REPORT_USAGE_PG_X 0x00010030
+#define TOUCH_REPORT_USAGE_PG_Y 0x00010031
+#define TOUCH_REPORT_USAGE_PG_P 0x000D0030
+#define TOUCH_REPORT_USAGE_PG_CONTACTID 0x000D0051
+#define TOUCH_REPORT_USAGE_PG_CONTACTCOUNT 0x000D0054
+#define TOUCH_REPORT_USAGE_PG_MAJ 0xFF010062
+#define TOUCH_REPORT_USAGE_PG_MIN 0xFF010063
+#define TOUCH_COL_USAGE_PG 0x000D0022
+
+/* helpers */
+#define HI_BYTE(x) ((u8)(((x) >> 8) & 0xFF))
+#define LOW_BYTE(x) ((u8)((x) & 0xFF))
+
+/* System Information interface definitions */
+struct cyttsp5_sensing_conf_data_dev {
+ u8 electrodes_x;
+ u8 electrodes_y;
+ __le16 len_x;
+ __le16 len_y;
+ __le16 res_x;
+ __le16 res_y;
+ __le16 max_z;
+ u8 origin_x;
+ u8 origin_y;
+ u8 btn;
+ u8 scan_mode;
+ u8 max_num_of_tch_per_refresh_cycle;
+} __packed;
+
+struct cyttsp5_sensing_conf_data {
+ u16 res_x;
+ u16 res_y;
+ u16 max_z;
+ u16 len_x;
+ u16 len_y;
+ u8 origin_x;
+ u8 origin_y;
+ u8 max_tch;
+};
+
+enum hid_cmd_state {
+ HID_CMD_DONE,
+ HID_CMD_BUSY,
+};
+
+enum cyttsp5_tch_abs { /* for ordering within the extracted touch data array */
+ CY_TCH_X, /* X */
+ CY_TCH_Y, /* Y */
+ CY_TCH_P, /* P (Z) */
+ CY_TCH_T, /* TOUCH ID */
+ CY_TCH_MAJ, /* TOUCH_MAJOR */
+ CY_TCH_MIN, /* TOUCH_MINOR */
+ CY_TCH_NUM_ABS,
+};
+
+struct cyttsp5_tch_abs_params {
+ size_t ofs; /* abs byte offset */
+ size_t size; /* size in bits */
+ size_t min; /* min value */
+ size_t max; /* max value */
+ size_t bofs; /* bit offset */
+};
+
+struct cyttsp5_touch {
+ int hdr;
+ int abs[CY_TCH_NUM_ABS];
+};
+
+struct cyttsp5_sysinfo {
+ struct cyttsp5_sensing_conf_data sensing_conf_data;
+ int num_btns;
+ struct cyttsp5_tch_abs_params tch_hdr;
+ struct cyttsp5_tch_abs_params tch_abs[CY_TCH_NUM_ABS];
+ u32 key_code[HID_SYSINFO_MAX_BTN];
+ u8 *xy_mode;
+ u8 *xy_data;
+};
+
+struct cyttsp5_hid_desc {
+ __le16 hid_desc_len;
+ u8 packet_id;
+ u8 reserved_byte;
+ __le16 bcd_version;
+ __le16 report_desc_len;
+ __le16 report_desc_register;
+ __le16 input_register;
+ __le16 max_input_len;
+ __le16 output_register;
+ __le16 max_output_len;
+ __le16 command_register;
+ __le16 data_register;
+ __le16 vendor_id;
+ __le16 product_id;
+ __le16 version_id;
+ u8 reserved[4];
+} __packed;
+
+struct cyttsp5 {
+ struct device *dev;
+ struct mutex system_lock;
+ wait_queue_head_t wait_q;
+ struct cyttsp5_sysinfo sysinfo;
+ int hid_cmd_state;
+ struct cyttsp5_hid_desc hid_desc;
+ u8 cmd_buf[CYTTSP5_PREALLOCATED_CMD_BUFFER];
+ u8 input_buf[CY_MAX_INPUT];
+ u8 response_buf[CY_MAX_INPUT];
+ struct gpio_desc *reset_gpio;
+ struct input_dev *input;
+ char phys[NAME_MAX];
+ int num_prv_rec;
+ struct regmap *regmap;
+ struct touchscreen_properties prop;
+ struct regulator *vdd;
+};
+
+/*
+ * For what understood in the datasheet, the register does not
+ * matter. For consistency, used the Input Register address
+ * but it does mean anything to the device. The important data
+ * to send is the I2C address
+ */
+static int cyttsp5_read(struct cyttsp5 *ts, u8 *buf, u32 max)
+{
+ int rc;
+ u32 size;
+ u8 temp[2];
+
+ if (!buf)
+ return -EINVAL;
+
+ /* Read the frame to retrieve the size */
+ rc = regmap_bulk_read(ts->regmap, HID_INPUT_REG, temp, 2);
+ if (rc < 0)
+ return rc;
+
+ size = get_unaligned_le16(temp);
+ if (!size || size == 2)
+ return 0;
+
+ if (size > max)
+ return -EINVAL;
+
+ /* Get the real value */
+ return regmap_bulk_read(ts->regmap, HID_INPUT_REG, buf, size);
+}
+
+static int cyttsp5_write(struct cyttsp5 *ts, unsigned int reg, u8 *data,
+ size_t size)
+{
+ u8 cmd[size + 1];
+
+ /* High bytes of register address needed as first byte of cmd */
+ cmd[0] = HI_BYTE(reg);
+
+ /* Copy the rest of the data */
+ if (data)
+ memcpy(&cmd[1], data, size);
+
+ /* The hardware wants to receive a frame with the address register
+ * contains in the first two bytes. As the regmap_write function
+ * add the register adresse in the frame, we use the LOW_BYTE as
+ * first frame byte for the address register and the first
+ * data byte is the high register + left of the cmd to send
+ */
+ return regmap_bulk_write(ts->regmap, LOW_BYTE(reg), cmd, size + 1);
+}
+
+static void cyttsp5_final_sync(struct input_dev *input, int max_slots,
+ unsigned long *ids)
+{
+ int t;
+
+ for (t = 0; t < max_slots; t++) {
+ if (test_bit(t, ids))
+ continue;
+ input_mt_slot(input, t);
+ input_mt_report_slot_state(input, MT_TOOL_FINGER, false);
+ }
+
+ input_sync(input);
+}
+
+static void cyttsp5_report_slot_liftoff(struct cyttsp5 *ts, int max_slots)
+{
+ int t;
+
+ if (ts->num_prv_rec == 0)
+ return;
+
+ for (t = 0; t < max_slots; t++) {
+ input_mt_slot(ts->input, t);
+ input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, false);
+ }
+}
+
+static void cyttsp5_mt_lift_all(struct cyttsp5 *ts)
+{
+ struct cyttsp5_sysinfo *si = &ts->sysinfo;
+ int max = si->tch_abs[CY_TCH_T].max;
+
+ if (ts->num_prv_rec != 0) {
+ cyttsp5_report_slot_liftoff(ts, max);
+ input_sync(ts->input);
+ ts->num_prv_rec = 0;
+ }
+}
+
+static void cyttsp5_get_touch_axis(int *axis, int size, int max, u8 *xy_data,
+ int bofs)
+{
+ int nbyte;
+ int next;
+
+ for (nbyte = 0, *axis = 0, next = 0; nbyte < size; nbyte++)
+ *axis = *axis + ((xy_data[nbyte] >> bofs) << (nbyte * 8));
+
+ *axis &= max - 1;
+}
+
+static void cyttsp5_get_touch_record(struct cyttsp5 *ts,
+ struct cyttsp5_touch *touch, u8 *xy_data)
+{
+ struct cyttsp5_sysinfo *si = &ts->sysinfo;
+ enum cyttsp5_tch_abs abs;
+
+ for (abs = CY_TCH_X; abs < CY_TCH_NUM_ABS; abs++) {
+ cyttsp5_get_touch_axis(&touch->abs[abs],
+ si->tch_abs[abs].size,
+ si->tch_abs[abs].max,
+ xy_data + si->tch_abs[abs].ofs,
+ si->tch_abs[abs].bofs);
+ }
+}
+
+static void cyttsp5_get_mt_touches(struct cyttsp5 *ts,
+ struct cyttsp5_touch *tch, int num_cur_tch)
+{
+ struct cyttsp5_sysinfo *si = &ts->sysinfo;
+ int i, t = 0;
+ DECLARE_BITMAP(ids, si->tch_abs[CY_TCH_T].max);
+ u8 *tch_addr;
+ int tmp;
+
+ bitmap_zero(ids, si->tch_abs[CY_TCH_T].max);
+ memset(tch->abs, 0, sizeof(tch->abs));
+
+ for (i = 0; i < num_cur_tch; i++) {
+ tch_addr = si->xy_data + (i * TOUCH_REPORT_SIZE);
+ cyttsp5_get_touch_record(ts, tch, tch_addr);
+
+ /* Convert MAJOR/MINOR from mm to resolution */
+ tmp = tch->abs[CY_TCH_MAJ] * 100 * si->sensing_conf_data.res_x;
+ tch->abs[CY_TCH_MAJ] = tmp / si->sensing_conf_data.len_x;
+ tmp = tch->abs[CY_TCH_MIN] * 100 * si->sensing_conf_data.res_x;
+ tch->abs[CY_TCH_MIN] = tmp / si->sensing_conf_data.len_x;
+
+ t = tch->abs[CY_TCH_T];
+ input_mt_slot(ts->input, t);
+ input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, true);
+ __set_bit(t, ids);
+
+ /* position and pressure fields */
+ input_report_abs(ts->input, ABS_MT_POSITION_X,
+ tch->abs[CY_TCH_X]);
+ input_report_abs(ts->input, ABS_MT_POSITION_Y,
+ tch->abs[CY_TCH_Y]);
+ input_report_abs(ts->input, ABS_MT_PRESSURE,
+ tch->abs[CY_TCH_P]);
+
+ /* Get the extended touch fields */
+ input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR,
+ tch->abs[CY_TCH_MAJ]);
+ input_report_abs(ts->input, ABS_MT_TOUCH_MINOR,
+ tch->abs[CY_TCH_MIN]);
+
+ touchscreen_report_pos(ts->input, &ts->prop,
+ tch->abs[CY_TCH_X], tch->abs[CY_TCH_Y],
+ true);
+ }
+
+ cyttsp5_final_sync(ts->input, si->tch_abs[CY_TCH_T].max, ids);
+
+ ts->num_prv_rec = num_cur_tch;
+}
+
+/* read xy_data for all current touches */
+static int cyttsp5_xy_worker(struct cyttsp5 *ts)
+{
+ struct device *dev = ts->dev;
+ struct cyttsp5_sysinfo *si = &ts->sysinfo;
+ int max_tch = si->sensing_conf_data.max_tch;
+ struct cyttsp5_touch tch;
+ u8 num_cur_tch;
+
+ cyttsp5_get_touch_axis(&tch.hdr, si->tch_hdr.size,
+ si->tch_hdr.max,
+ si->xy_mode + 3 + si->tch_hdr.ofs,
+ si->tch_hdr.bofs);
+
+ num_cur_tch = tch.hdr;
+ if (num_cur_tch > max_tch) {
+ dev_err(dev, "Num touch err detected (n=%d)\n", num_cur_tch);
+ num_cur_tch = max_tch;
+ }
+
+ if (num_cur_tch == 0 && ts->num_prv_rec == 0)
+ return 0;
+
+ /* extract xy_data for all currently reported touches */
+ if (num_cur_tch)
+ cyttsp5_get_mt_touches(ts, &tch, num_cur_tch);
+ else
+ cyttsp5_mt_lift_all(ts);
+
+ return 0;
+}
+
+static int cyttsp5_mt_attention(struct device *dev)
+{
+ struct cyttsp5 *ts = dev_get_drvdata(dev);
+ struct cyttsp5_sysinfo *si = &ts->sysinfo;
+ int rc;
+
+ if (si->xy_mode[2] != HID_TOUCH_REPORT_ID)
+ return 0;
+
+ /* core handles handshake */
+ rc = cyttsp5_xy_worker(ts);
+ if (rc < 0)
+ dev_err(dev, "xy_worker error r=%d\n", rc);
+
+ return rc;
+}
+
+static int cyttsp5_setup_input_device(struct device *dev)
+{
+ struct cyttsp5 *ts = dev_get_drvdata(dev);
+ struct cyttsp5_sysinfo *si = &ts->sysinfo;
+ int max_x, max_y, max_p;
+ int max_x_tmp, max_y_tmp;
+ int rc;
+
+ __set_bit(EV_ABS, ts->input->evbit);
+ __set_bit(EV_REL, ts->input->evbit);
+ __set_bit(EV_KEY, ts->input->evbit);
+
+ max_x_tmp = si->sensing_conf_data.res_x;
+ max_y_tmp = si->sensing_conf_data.res_y;
+ max_x = max_x_tmp - 1;
+ max_y = max_y_tmp - 1;
+ max_p = si->sensing_conf_data.max_z;
+
+ input_mt_init_slots(ts->input, si->tch_abs[CY_TCH_T].max, 0);
+
+ __set_bit(ABS_MT_POSITION_X, ts->input->absbit);
+ __set_bit(ABS_MT_POSITION_Y, ts->input->absbit);
+ __set_bit(ABS_MT_PRESSURE, ts->input->absbit);
+
+ input_set_abs_params(ts->input, ABS_MT_POSITION_X, 0, max_x, 0, 0);
+ input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, max_y, 0, 0);
+ input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, max_p, 0, 0);
+
+ input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, MAX_AREA, 0, 0);
+ input_set_abs_params(ts->input, ABS_MT_TOUCH_MINOR, 0, MAX_AREA, 0, 0);
+
+ rc = input_register_device(ts->input);
+ if (rc < 0)
+ dev_err(dev, "Error, failed register input device r=%d\n", rc);
+
+ return rc;
+}
+
+#ifdef CONFIG_OF
+static int cyttsp5_parse_dt_key_code(struct device *dev)
+{
+ struct cyttsp5 *ts = dev_get_drvdata(dev);
+ struct cyttsp5_sysinfo *si = &ts->sysinfo;
+ struct device_node *np;
+ int i;
+
+ np = dev->of_node;
+ if (!np)
+ return -EINVAL;
+
+ if (!si->num_btns)
+ return 0;
+
+ /* Initialize the button to RESERVED */
+ for (i = 0; i < si->num_btns; i++)
+ si->key_code[i] = KEY_RESERVED;
+
+ return of_property_read_u32_array(np, "linux,keycodes",
+ si->key_code, si->num_btns);
+}
+#else
+static int cyttsp5_parse_dt_key_code(struct device *dev)
+{
+ struct cyttsp5 *ts = dev_get_drvdata(dev);
+ struct cyttsp5_sysinfo *si = &ts->sysinfo;
+ int i;
+
+ if (!si->num_btns)
+ return 0;
+
+ /* Initialize the button to RESERVED */
+ for (i = 0; i < si->num_btns; i++)
+ si->key_code[i] = KEY_RESERVED;
+
+ return 0;
+}
+#endif
+
+static int cyttsp5_btn_attention(struct device *dev)
+{
+ struct cyttsp5 *ts = dev_get_drvdata(dev);
+ struct cyttsp5_sysinfo *si = &ts->sysinfo;
+ int cur_btn;
+ int cur_btn_state;
+
+ if (si->xy_mode[2] != HID_BTN_REPORT_ID || !si->num_btns)
+ return 0;
+
+ /* extract button press/release touch information */
+ for (cur_btn = 0; cur_btn < si->num_btns; cur_btn++) {
+ /* Get current button state */
+ cur_btn_state = (si->xy_data[0] >> (cur_btn * CY_BITS_PER_BTN))
+ & CY_NUM_BTN_EVENT_ID;
+
+ input_report_key(ts->input, si->key_code[cur_btn],
+ cur_btn_state);
+ input_sync(ts->input);
+ }
+
+ return 0;
+}
+
+static u16 cyttsp5_compute_crc(u8 *buf, u32 size)
+{
+ u16 remainder = 0xFFFF;
+ u16 xor_mask = 0x0000;
+ u32 index;
+ u32 byte_value;
+ u32 table_index;
+ u32 crc_bit_width = sizeof(u16) * 8;
+
+ /* Divide the message by polynomial, via the table. */
+ for (index = 0; index < size; index++) {
+ byte_value = buf[index];
+ table_index = ((byte_value >> 4) & 0x0F)
+ ^ (remainder >> (crc_bit_width - 4));
+ remainder = crc_itu_t_table[table_index]
+ ^ (remainder << 4);
+ table_index = (byte_value & 0x0F)
+ ^ (remainder >> (crc_bit_width - 4));
+ remainder = crc_itu_t_table[table_index]
+ ^ (remainder << 4);
+ }
+
+ /* Perform the final remainder CRC. */
+ return remainder ^ xor_mask;
+}
+
+static int cyttsp5_validate_cmd_response(struct cyttsp5 *ts, u8 code)
+{
+ u16 size, crc;
+ u8 status, offset;
+ int command_code;
+
+ size = get_unaligned_le16(&ts->response_buf[0]);
+
+ if (!size)
+ return 0;
+
+ offset = ts->response_buf[HID_OUTPUT_RESPONSE_REPORT_OFFSET];
+
+ if (offset == HID_BL_RESPONSE_REPORT_ID) {
+ if (ts->response_buf[4] != HID_OUTPUT_BL_SOP) {
+ dev_err(ts->dev, "HID output response, wrong SOP\n");
+ return -EPROTO;
+ }
+
+ if (ts->response_buf[size - 1] != HID_OUTPUT_BL_EOP) {
+ dev_err(ts->dev, "HID output response, wrong EOP\n");
+ return -EPROTO;
+ }
+
+ crc = cyttsp5_compute_crc(&ts->response_buf[4], size - 7);
+ if (ts->response_buf[size - 3] != LOW_BYTE(crc) ||
+ ts->response_buf[size - 2] != HI_BYTE(crc)) {
+ dev_err(ts->dev, "HID output response, wrong CRC 0x%X\n",
+ crc);
+ return -EPROTO;
+ }
+
+ status = ts->response_buf[5];
+ if (status) {
+ dev_err(ts->dev, "HID output response, ERROR:%d\n",
+ status);
+ return -EPROTO;
+ }
+ }
+
+ if (offset == HID_APP_RESPONSE_REPORT_ID) {
+ command_code = ts->response_buf[HID_OUTPUT_RESPONSE_CMD_OFFSET]
+ & HID_OUTPUT_RESPONSE_CMD_MASK;
+ if (command_code != code) {
+ dev_err(ts->dev,
+ "HID output response, wrong command_code:%X\n",
+ command_code);
+ return -EPROTO;
+ }
+ }
+
+ return 0;
+}
+
+static void cyttsp5_si_get_btn_data(struct cyttsp5 *ts)
+{
+ struct cyttsp5_sysinfo *si = &ts->sysinfo;
+ int i;
+ unsigned int btns = ts->response_buf[HID_SYSINFO_BTN_OFFSET]
+ & HID_SYSINFO_BTN_MASK;
+
+ si->num_btns = 0;
+ for (i = 0; i < HID_SYSINFO_MAX_BTN; i++) {
+ if (btns & BIT(i))
+ si->num_btns++;
+ }
+}
+
+static int cyttsp5_get_sysinfo_regs(struct cyttsp5 *ts)
+{
+ struct cyttsp5_sensing_conf_data *scd = &ts->sysinfo.sensing_conf_data;
+ struct cyttsp5_sensing_conf_data_dev *scd_dev =
+ (struct cyttsp5_sensing_conf_data_dev *)
+ &ts->response_buf[HID_SYSINFO_SENSING_OFFSET];
+ struct cyttsp5_sysinfo *si = &ts->sysinfo;
+
+ cyttsp5_si_get_btn_data(ts);
+
+ scd->max_tch = scd_dev->max_num_of_tch_per_refresh_cycle;
+ scd->res_x = get_unaligned_le16(&scd_dev->res_x);
+ scd->res_y = get_unaligned_le16(&scd_dev->res_y);
+ scd->max_z = get_unaligned_le16(&scd_dev->max_z);
+ scd->len_x = get_unaligned_le16(&scd_dev->len_x);
+ scd->len_y = get_unaligned_le16(&scd_dev->len_y);
+
+ si->xy_data = devm_kzalloc(ts->dev, scd->max_tch * TOUCH_REPORT_SIZE,
+ GFP_KERNEL);
+ if (!si->xy_data)
+ return -ENOMEM;
+
+ si->xy_mode = devm_kzalloc(ts->dev, TOUCH_INPUT_HEADER_SIZE,
+ GFP_KERNEL);
+ if (!si->xy_mode)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static int cyttsp5_hid_output_get_sysinfo(struct cyttsp5 *ts)
+{
+ int rc;
+ u8 cmd[HID_OUTPUT_GET_SYSINFO_SIZE];
+
+ ts->hid_cmd_state = HID_CMD_BUSY;
+
+ /* HI bytes of Output register address */
+ cmd[0] = LOW_BYTE(HID_OUTPUT_GET_SYSINFO_SIZE);
+ cmd[1] = HI_BYTE(HID_OUTPUT_GET_SYSINFO_SIZE);
+ cmd[2] = HID_APP_OUTPUT_REPORT_ID;
+ cmd[3] = 0x0; /* Reserved */
+ cmd[4] = HID_OUTPUT_GET_SYSINFO;
+
+ rc = cyttsp5_write(ts, HID_OUTPUT_REG, cmd,
+ HID_OUTPUT_GET_SYSINFO_SIZE);
+ if (rc) {
+ dev_err(ts->dev, "Failed to write command %d", rc);
+ goto error;
+ }
+
+ rc = wait_event_timeout(ts->wait_q, (ts->hid_cmd_state == HID_CMD_DONE),
+ msecs_to_jiffies(CY_HID_OUTPUT_GET_SYSINFO_TIMEOUT));
+ if (!rc) {
+ dev_err(ts->dev, "HID output cmd execution timed out\n");
+ rc = -ETIME;
+ goto error;
+ }
+
+ rc = cyttsp5_validate_cmd_response(ts, HID_OUTPUT_GET_SYSINFO);
+ if (rc) {
+ dev_err(ts->dev, "Validation of the response failed\n");
+ goto error;
+ }
+
+ return cyttsp5_get_sysinfo_regs(ts);
+
+error:
+ mutex_lock(&ts->system_lock);
+ ts->hid_cmd_state = HID_CMD_DONE;
+ mutex_unlock(&ts->system_lock);
+ return rc;
+}
+
+static int cyttsp5_hid_output_bl_launch_app(struct cyttsp5 *ts)
+{
+ int rc;
+ u8 cmd[HID_OUTPUT_BL_LAUNCH_APP];
+ u16 crc;
+
+ mutex_lock(&ts->system_lock);
+ ts->hid_cmd_state = HID_CMD_BUSY;
+ mutex_unlock(&ts->system_lock);
+
+ cmd[0] = LOW_BYTE(HID_OUTPUT_BL_LAUNCH_APP_SIZE);
+ cmd[1] = HI_BYTE(HID_OUTPUT_BL_LAUNCH_APP_SIZE);
+ cmd[2] = HID_BL_OUTPUT_REPORT_ID;
+ cmd[3] = 0x0; /* Reserved */
+ cmd[4] = HID_OUTPUT_BL_SOP;
+ cmd[5] = HID_OUTPUT_BL_LAUNCH_APP;
+ cmd[6] = 0x0; /* Low bytes of data */
+ cmd[7] = 0x0; /* Hi bytes of data */
+ crc = cyttsp5_compute_crc(&cmd[4], 4);
+ cmd[8] = LOW_BYTE(crc);
+ cmd[9] = HI_BYTE(crc);
+ cmd[10] = HID_OUTPUT_BL_EOP;
+
+ rc = cyttsp5_write(ts, HID_OUTPUT_REG, cmd,
+ HID_OUTPUT_BL_LAUNCH_APP_SIZE);
+ if (rc) {
+ dev_err(ts->dev, "Failed to write command %d", rc);
+ goto error;
+ }
+
+ rc = wait_event_timeout(ts->wait_q, (ts->hid_cmd_state == HID_CMD_DONE),
+ msecs_to_jiffies(CY_HID_OUTPUT_TIMEOUT));
+ if (!rc) {
+ dev_err(ts->dev, "HID output cmd execution timed out\n");
+ rc = -ETIME;
+ goto error;
+ }
+
+ rc = cyttsp5_validate_cmd_response(ts, HID_OUTPUT_BL_LAUNCH_APP);
+ if (rc) {
+ dev_err(ts->dev, "Validation of the response failed\n");
+ goto error;
+ }
+
+ return rc;
+
+error:
+ mutex_lock(&ts->system_lock);
+ ts->hid_cmd_state = HID_CMD_DONE;
+ mutex_unlock(&ts->system_lock);
+
+ return rc;
+}
+
+static int cyttsp5_get_hid_descriptor(struct cyttsp5 *ts,
+ struct cyttsp5_hid_desc *desc)
+{
+ struct device *dev = ts->dev;
+ __le16 hid_desc_register = HID_DESC_REG;
+ int rc;
+ u8 cmd[2];
+
+ /* Read HID descriptor length and version */
+ mutex_lock(&ts->system_lock);
+ ts->hid_cmd_state = HID_CMD_BUSY;
+ mutex_unlock(&ts->system_lock);
+
+ /* Set HID descriptor register */
+ memcpy(cmd, &hid_desc_register, sizeof(hid_desc_register));
+
+ rc = cyttsp5_write(ts, HID_DESC_REG, NULL, 0);
+ if (rc < 0) {
+ dev_err(dev, "Failed to get HID descriptor, rc=%d\n", rc);
+ goto error;
+ }
+
+ rc = wait_event_timeout(ts->wait_q, (ts->hid_cmd_state == HID_CMD_DONE),
+ msecs_to_jiffies(CY_HID_GET_HID_DESCRIPTOR_TIMEOUT));
+ if (!rc) {
+ dev_err(ts->dev, "HID get descriptor timed out\n");
+ rc = -ETIME;
+ goto error;
+ }
+
+ memcpy(desc, ts->response_buf, sizeof(struct cyttsp5_hid_desc));
+
+ /* Check HID descriptor length and version */
+ if (le16_to_cpu(desc->hid_desc_len) != sizeof(*desc) ||
+ le16_to_cpu(desc->bcd_version) != HID_VERSION) {
+ dev_err(dev, "Unsupported HID version\n");
+ return -ENODEV;
+ }
+
+ goto exit;
+
+error:
+ mutex_lock(&ts->system_lock);
+ ts->hid_cmd_state = HID_CMD_DONE;
+ mutex_unlock(&ts->system_lock);
+exit:
+ return rc;
+}
+
+static int fill_tch_abs(struct cyttsp5_tch_abs_params *tch_abs, int report_size,
+ int offset)
+{
+ tch_abs->ofs = offset / 8;
+ tch_abs->size = report_size / 8;
+ if (report_size % 8)
+ tch_abs->size += 1;
+ tch_abs->min = 0;
+ tch_abs->max = 1 << report_size;
+ tch_abs->bofs = offset - (tch_abs->ofs << 3);
+
+ return 0;
+}
+
+static int move_button_data(struct cyttsp5 *ts, struct cyttsp5_sysinfo *si)
+{
+ memcpy(si->xy_mode, ts->input_buf, BTN_INPUT_HEADER_SIZE);
+ memcpy(si->xy_data, &ts->input_buf[BTN_INPUT_HEADER_SIZE],
+ BTN_REPORT_SIZE);
+
+ return 0;
+}
+
+static int move_touch_data(struct cyttsp5 *ts, struct cyttsp5_sysinfo *si)
+{
+ int max_tch = si->sensing_conf_data.max_tch;
+ int num_cur_tch;
+ int length;
+ struct cyttsp5_tch_abs_params *tch = &si->tch_hdr;
+
+ memcpy(si->xy_mode, ts->input_buf, TOUCH_INPUT_HEADER_SIZE);
+
+ cyttsp5_get_touch_axis(&num_cur_tch, tch->size,
+ tch->max, si->xy_mode + 3 + tch->ofs, tch->bofs);
+ if (unlikely(num_cur_tch > max_tch))
+ num_cur_tch = max_tch;
+
+ length = num_cur_tch * TOUCH_REPORT_SIZE;
+
+ memcpy(si->xy_data, &ts->input_buf[TOUCH_INPUT_HEADER_SIZE], length);
+
+ return 0;
+}
+
+static irqreturn_t cyttsp5_handle_irq(int irq, void *handle)
+{
+ struct cyttsp5 *ts = handle;
+ int report_id;
+ int size;
+ int rc;
+
+ rc = cyttsp5_read(ts, ts->input_buf, CY_MAX_INPUT);
+ if (rc)
+ return IRQ_HANDLED;
+
+ size = get_unaligned_le16(&ts->input_buf[0]);
+
+ /* check reset */
+ if (size == 0) {
+ memcpy(ts->response_buf, ts->input_buf, 2);
+
+ mutex_lock(&ts->system_lock);
+ ts->hid_cmd_state = HID_CMD_DONE;
+ mutex_unlock(&ts->system_lock);
+ wake_up(&ts->wait_q);
+ return IRQ_HANDLED;
+ }
+
+ report_id = ts->input_buf[2];
+
+ if (report_id == HID_TOUCH_REPORT_ID) {
+ move_touch_data(ts, &ts->sysinfo);
+ cyttsp5_mt_attention(ts->dev);
+ } else if (report_id == HID_BTN_REPORT_ID) {
+ move_button_data(ts, &ts->sysinfo);
+ cyttsp5_btn_attention(ts->dev);
+ } else {
+ /* It is not an input but a command response */
+ memcpy(ts->response_buf, ts->input_buf, size);
+
+ mutex_lock(&ts->system_lock);
+ ts->hid_cmd_state = HID_CMD_DONE;
+ mutex_unlock(&ts->system_lock);
+ wake_up(&ts->wait_q);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int cyttsp5_deassert_int(struct cyttsp5 *ts)
+{
+ u16 size;
+ u8 buf[2];
+ int rc;
+
+ rc = regmap_bulk_read(ts->regmap, HID_INPUT_REG, buf, 2);
+ if (rc < 0)
+ return rc;
+
+ size = get_unaligned_le16(&buf[0]);
+ if (size == 2 || size == 0)
+ return 0;
+
+ return -EINVAL;
+}
+
+static int cyttsp5_fill_all_touch(struct cyttsp5 *ts)
+{
+ struct cyttsp5_sysinfo *si = &ts->sysinfo;
+
+ fill_tch_abs(&si->tch_abs[CY_TCH_X], REPORT_SIZE_16,
+ TOUCH_REPORT_DESC_X);
+ fill_tch_abs(&si->tch_abs[CY_TCH_Y], REPORT_SIZE_16,
+ TOUCH_REPORT_DESC_Y);
+ fill_tch_abs(&si->tch_abs[CY_TCH_P], REPORT_SIZE_8,
+ TOUCH_REPORT_DESC_P);
+ fill_tch_abs(&si->tch_abs[CY_TCH_T], REPORT_SIZE_5,
+ TOUCH_REPORT_DESC_CONTACTID);
+ fill_tch_abs(&si->tch_hdr, REPORT_SIZE_5,
+ TOUCH_REPORT_DESC_HDR_CONTACTCOUNT);
+ fill_tch_abs(&si->tch_abs[CY_TCH_MAJ], REPORT_SIZE_8,
+ TOUCH_REPORT_DESC_MAJ);
+ fill_tch_abs(&si->tch_abs[CY_TCH_MIN], REPORT_SIZE_8,
+ TOUCH_REPORT_DESC_MIN);
+
+ return 0;
+}
+
+static int cyttsp5_startup(struct cyttsp5 *ts)
+{
+ int rc;
+
+ rc = cyttsp5_deassert_int(ts);
+ if (rc) {
+ dev_err(ts->dev, "Error on deassert int r=%d\n", rc);
+ return -ENODEV;
+ }
+
+ /*
+ * Launch the application as the device starts in bootloader mode
+ * because of a power-on-reset
+ */
+ rc = cyttsp5_hid_output_bl_launch_app(ts);
+ if (rc < 0) {
+ dev_err(ts->dev, "Error on launch app r=%d\n", rc);
+ return rc;
+ }
+
+ rc = cyttsp5_get_hid_descriptor(ts, &ts->hid_desc);
+ if (rc < 0) {
+ dev_err(ts->dev, "Error on getting HID descriptor r=%d\n", rc);
+ return rc;
+ }
+
+ rc = cyttsp5_fill_all_touch(ts);
+ if (rc < 0) {
+ dev_err(ts->dev, "Error on report descriptor r=%d\n", rc);
+ return rc;
+ }
+
+ rc = cyttsp5_hid_output_get_sysinfo(ts);
+ if (rc) {
+ dev_err(ts->dev, "Error on getting sysinfo r=%d\n", rc);
+ return rc;
+ }
+
+ return rc;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id cyttsp5_of_match[] = {
+ { .compatible = "cypress,cyttsp5", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, cyttsp5_of_match);
+#endif
+
+static const struct i2c_device_id cyttsp5_i2c_id[] = {
+ { CYTTSP5_NAME, 0, },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, cyttsp5_i2c_id);
+
+static int cyttsp5_probe(struct device *dev, struct regmap *regmap, int irq,
+ const char *name)
+{
+ struct cyttsp5 *ts;
+ struct cyttsp5_sysinfo *si;
+ int rc = 0, i;
+
+ ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
+ if (!ts)
+ return -ENOMEM;
+
+ /* Initialize device info */
+ ts->regmap = regmap;
+ ts->dev = dev;
+ si = &ts->sysinfo;
+ dev_set_drvdata(dev, ts);
+
+ /* Initialize mutexes and spinlocks */
+ mutex_init(&ts->system_lock);
+
+ /* Initialize wait queue */
+ init_waitqueue_head(&ts->wait_q);
+
+ /* Power up the device */
+ ts->vdd = regulator_get(dev, "vdd");
+ if (IS_ERR(ts->vdd)) {
+ rc = PTR_ERR(ts->vdd);
+ dev_set_drvdata(dev, NULL);
+ kfree(ts);
+ return rc;
+ }
+
+ rc = regulator_enable(ts->vdd);
+ if (rc) {
+ regulator_put(ts->vdd);
+ dev_set_drvdata(dev, NULL);
+ kfree(ts);
+ return rc;
+ }
+
+ /* Reset the gpio to be in a reset state */
+ ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(ts->reset_gpio)) {
+ rc = PTR_ERR(ts->reset_gpio);
+ dev_err(dev, "Failed to request reset gpio, error %d\n", rc);
+ return rc;
+ }
+ gpiod_set_value(ts->reset_gpio, 1);
+
+ /* Need a delay to have device up */
+ msleep(20);
+
+ rc = devm_request_threaded_irq(dev, irq, NULL, cyttsp5_handle_irq,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ name, ts);
+ if (rc) {
+ dev_err(dev, "unable to request IRQ\n");
+ return rc;
+ }
+
+ rc = cyttsp5_startup(ts);
+ if (rc) {
+ dev_err(ts->dev, "Fail initial startup r=%d\n", rc);
+ return rc;
+ }
+
+ rc = cyttsp5_parse_dt_key_code(dev);
+ if (rc < 0) {
+ dev_err(ts->dev, "Error while parsing dts %d\n", rc);
+ return rc;
+ }
+
+ ts->input = devm_input_allocate_device(dev);
+ if (!ts->input) {
+ dev_err(dev, "Error, failed to allocate input device\n");
+ return -ENODEV;
+ }
+
+ ts->input->name = "cyttsp5";
+ scnprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev));
+ ts->input->phys = ts->phys;
+ ts->input->dev.parent = ts->dev;
+ input_set_drvdata(ts->input, ts);
+
+ touchscreen_parse_properties(ts->input, true, &ts->prop);
+
+ __set_bit(EV_KEY, ts->input->evbit);
+ __set_bit(ABS_X, ts->input->absbit);
+ __set_bit(ABS_Y, ts->input->absbit);
+ __set_bit(BTN_TOUCH, ts->input->keybit);
+ for (i = 0; i < si->num_btns; i++)
+ __set_bit(si->key_code[i], ts->input->keybit);
+
+ return cyttsp5_setup_input_device(dev);
+}
+
+static int cyttsp5_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct regmap *regmap;
+ static const struct regmap_config config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ };
+
+ regmap = devm_regmap_init_i2c(client, &config);
+ if (IS_ERR(regmap)) {
+ dev_err(&client->dev, "regmap allocation failed: %ld\n",
+ PTR_ERR(regmap));
+ return PTR_ERR(regmap);
+ }
+
+ return cyttsp5_probe(&client->dev, regmap, client->irq, client->name);
+}
+
+static int cyttsp5_remove(struct device *dev)
+{
+ struct cyttsp5 *ts = dev_get_drvdata(dev);
+
+ input_unregister_device(ts->input);
+
+ return 0;
+}
+
+static int cyttsp5_i2c_remove(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+
+ return cyttsp5_remove(dev);
+}
+
+static struct i2c_driver cyttsp5_i2c_driver = {
+ .driver = {
+ .name = CYTTSP5_NAME,
+ .of_match_table = of_match_ptr(cyttsp5_of_match),
+ },
+ .probe = cyttsp5_i2c_probe,
+ .remove = cyttsp5_i2c_remove,
+ .id_table = cyttsp5_i2c_id,
+};
+
+module_i2c_driver(cyttsp5_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Touchscreen driver for Cypress TrueTouch Gen 5 Product");
+MODULE_AUTHOR("Mylène Josserand <mylene.josserand@bootlin.com>");
--
2.31.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 2/4] Documentation: DT: bindings: input: Add documentation for cyttsp5
2021-10-25 11:42 ` Alistair Francis
@ 2021-10-25 11:42 ` Alistair Francis
-1 siblings, 0 replies; 25+ messages in thread
From: Alistair Francis @ 2021-10-25 11:42 UTC (permalink / raw)
To: linux-arm-kernel, devicetree, linux-kernel, linux-input
Cc: andreas, alistair23, dmitry.torokhov, linus.walleij, robh+dt,
rydberg, mylene.josserand, Alistair Francis
From: Mylène Josserand <mylene.josserand@free-electrons.com>
Add the Cypress TrueTouch Generation 5 touchscreen device tree bindings
documentation. It can use I2C or SPI bus.
This touchscreen can handle some defined zone that are designed and
sent as button. To be able to customize the keycode sent, the
"linux,code" property in a "button" sub-node can be used.
Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Message-Id: <20170529144538.29187-3-mylene.josserand@free-electrons.com>
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
.../input/touchscreen/cypress,cyttsp5.yaml | 72 +++++++++++++++++++
1 file changed, 72 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/cypress,cyttsp5.yaml
diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,cyttsp5.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,cyttsp5.yaml
new file mode 100644
index 000000000000..0bddbd76a0c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,cyttsp5.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/cypress,cyttsp5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress cyttsp touchscreen controller, generation 5
+
+maintainers:
+ - Alistair Francis <alistair@alistair23.me>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ const: cypress,cyttsp5
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ vdd-supply:
+ description: Regulator for voltage.
+
+ reset-gpios:
+ maxItems: 1
+
+ linux,code:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: EV_ABS specific event code generated by the axis.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - vdd-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@24 {
+ compatible = "cypress,cyttsp5";
+ reg = <0x24>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tp_reset_ds203>;
+ interrupt-parent = <&pio>;
+ interrupts = <1 5 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
+ vdd-supply = <®_touch>;
+
+ button@0 {
+ linux,code = <KEY_HOMEPAGE>;
+ };
+
+ button@1 {
+ linux,code = <KEY_MENU>;
+ };
+
+ button@2 {
+ linux,code = <KEY_BACK>;
+ };
+ };
+ };
+...
--
2.31.1
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 2/4] Documentation: DT: bindings: input: Add documentation for cyttsp5
@ 2021-10-25 11:42 ` Alistair Francis
0 siblings, 0 replies; 25+ messages in thread
From: Alistair Francis @ 2021-10-25 11:42 UTC (permalink / raw)
To: linux-arm-kernel, devicetree, linux-kernel, linux-input
Cc: andreas, alistair23, dmitry.torokhov, linus.walleij, robh+dt,
rydberg, mylene.josserand, Alistair Francis
From: Mylène Josserand <mylene.josserand@free-electrons.com>
Add the Cypress TrueTouch Generation 5 touchscreen device tree bindings
documentation. It can use I2C or SPI bus.
This touchscreen can handle some defined zone that are designed and
sent as button. To be able to customize the keycode sent, the
"linux,code" property in a "button" sub-node can be used.
Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Message-Id: <20170529144538.29187-3-mylene.josserand@free-electrons.com>
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
.../input/touchscreen/cypress,cyttsp5.yaml | 72 +++++++++++++++++++
1 file changed, 72 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/cypress,cyttsp5.yaml
diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,cyttsp5.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,cyttsp5.yaml
new file mode 100644
index 000000000000..0bddbd76a0c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,cyttsp5.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/cypress,cyttsp5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress cyttsp touchscreen controller, generation 5
+
+maintainers:
+ - Alistair Francis <alistair@alistair23.me>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ const: cypress,cyttsp5
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ vdd-supply:
+ description: Regulator for voltage.
+
+ reset-gpios:
+ maxItems: 1
+
+ linux,code:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: EV_ABS specific event code generated by the axis.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - vdd-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@24 {
+ compatible = "cypress,cyttsp5";
+ reg = <0x24>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tp_reset_ds203>;
+ interrupt-parent = <&pio>;
+ interrupts = <1 5 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
+ vdd-supply = <®_touch>;
+
+ button@0 {
+ linux,code = <KEY_HOMEPAGE>;
+ };
+
+ button@1 {
+ linux,code = <KEY_MENU>;
+ };
+
+ button@2 {
+ linux,code = <KEY_BACK>;
+ };
+ };
+ };
+...
--
2.31.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 3/4] ARM: imx_v6_v7_defconfig: Enable the cyttsp5 touchscreen
2021-10-25 11:42 ` Alistair Francis
@ 2021-10-25 11:42 ` Alistair Francis
-1 siblings, 0 replies; 25+ messages in thread
From: Alistair Francis @ 2021-10-25 11:42 UTC (permalink / raw)
To: linux-arm-kernel, devicetree, linux-kernel, linux-input
Cc: andreas, alistair23, dmitry.torokhov, linus.walleij, robh+dt,
rydberg, mylene.josserand, Alistair Francis
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
arch/arm/configs/imx_v6_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 5e4128dadd8d..1590370a431a 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -172,6 +172,7 @@ CONFIG_TOUCHSCREEN_ADS7846=y
CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_AD7879_I2C=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
+CONFIG_TOUCHSCREEN_CYTTSP5=y
CONFIG_TOUCHSCREEN_DA9052=y
CONFIG_TOUCHSCREEN_EGALAX=y
CONFIG_TOUCHSCREEN_GOODIX=y
--
2.31.1
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 3/4] ARM: imx_v6_v7_defconfig: Enable the cyttsp5 touchscreen
@ 2021-10-25 11:42 ` Alistair Francis
0 siblings, 0 replies; 25+ messages in thread
From: Alistair Francis @ 2021-10-25 11:42 UTC (permalink / raw)
To: linux-arm-kernel, devicetree, linux-kernel, linux-input
Cc: andreas, alistair23, dmitry.torokhov, linus.walleij, robh+dt,
rydberg, mylene.josserand, Alistair Francis
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
arch/arm/configs/imx_v6_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 5e4128dadd8d..1590370a431a 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -172,6 +172,7 @@ CONFIG_TOUCHSCREEN_ADS7846=y
CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_AD7879_I2C=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
+CONFIG_TOUCHSCREEN_CYTTSP5=y
CONFIG_TOUCHSCREEN_DA9052=y
CONFIG_TOUCHSCREEN_EGALAX=y
CONFIG_TOUCHSCREEN_GOODIX=y
--
2.31.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 4/4] ARM: dts: imx7d: remarkable2: Enable the cyttsp5
2021-10-25 11:42 ` Alistair Francis
@ 2021-10-25 11:42 ` Alistair Francis
-1 siblings, 0 replies; 25+ messages in thread
From: Alistair Francis @ 2021-10-25 11:42 UTC (permalink / raw)
To: linux-arm-kernel, devicetree, linux-kernel, linux-input
Cc: andreas, alistair23, dmitry.torokhov, linus.walleij, robh+dt,
rydberg, mylene.josserand, Alistair Francis
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
| 88 +++++++++++++++++++++++++
1 file changed, 88 insertions(+)
--git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
index 89cbf13097a4..9a8558c970ad 100644
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -34,6 +34,18 @@ reg_brcm: regulator-brcm {
startup-delay-us = <150>;
};
+ reg_touch: regulator-touch {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_3V3_TOUCH";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_touch_reg>;
+ pinctrl-1 = <&pinctrl_touch_reg>;
+ gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
@@ -51,6 +63,59 @@ &clks {
assigned-clock-rates = <0>, <32768>;
};
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ tsc@24 {
+ compatible = "cypress,cyttsp5";
+ reg = <0x24>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_touch>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio1 13 0>;
+ vdd-supply = <®_touch>;
+ touchscreen-size-x = <880>;
+ touchscreen-size-y = <1280>;
+
+ button@0 {
+ linux,code = <172>; /* KEY_HOMEPAGE */
+ };
+
+ button@1 {
+ linux,code = <139>; /* KEY_MENU */
+ };
+
+ button@2 {
+ linux,code = <158>; /* KEY_BACK */
+ };
+
+ button@3 {
+ linux,code = <217>; /* KEY_SEARCH */
+ };
+
+ button@4 {
+ linux,code = <114>; /* KEY_VOLUMEDOWN */
+ };
+
+ button@5 {
+ linux,code = <115>; /* KEY_VOLUMEUP */
+ };
+
+ button@6 {
+ linux,code = <212>; /* KEY_CAMERA */
+ };
+
+ button@7 {
+ linux,code = <116>; /* KEY_POWER */
+ };
+ };
+};
+
&snvs_pwrkey {
status = "okay";
};
@@ -125,6 +190,29 @@ MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x14
>;
};
+ pinctrl_touch: touchgrp {
+ fsl,pins = <
+ /* CYTTSP interrupt */
+ MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x54
+ /* CYTTSP reset */
+ MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x04
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f
+ MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_touch_reg: touchreggrp {
+ fsl,pins = <
+ /* TOUCH_PWR_EN */
+ MX7D_PAD_GPIO1_IO11__GPIO1_IO11 0x14
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
--
2.31.1
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 4/4] ARM: dts: imx7d: remarkable2: Enable the cyttsp5
@ 2021-10-25 11:42 ` Alistair Francis
0 siblings, 0 replies; 25+ messages in thread
From: Alistair Francis @ 2021-10-25 11:42 UTC (permalink / raw)
To: linux-arm-kernel, devicetree, linux-kernel, linux-input
Cc: andreas, alistair23, dmitry.torokhov, linus.walleij, robh+dt,
rydberg, mylene.josserand, Alistair Francis
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
| 88 +++++++++++++++++++++++++
1 file changed, 88 insertions(+)
--git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
index 89cbf13097a4..9a8558c970ad 100644
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -34,6 +34,18 @@ reg_brcm: regulator-brcm {
startup-delay-us = <150>;
};
+ reg_touch: regulator-touch {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_3V3_TOUCH";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_touch_reg>;
+ pinctrl-1 = <&pinctrl_touch_reg>;
+ gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
@@ -51,6 +63,59 @@ &clks {
assigned-clock-rates = <0>, <32768>;
};
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ tsc@24 {
+ compatible = "cypress,cyttsp5";
+ reg = <0x24>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_touch>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio1 13 0>;
+ vdd-supply = <®_touch>;
+ touchscreen-size-x = <880>;
+ touchscreen-size-y = <1280>;
+
+ button@0 {
+ linux,code = <172>; /* KEY_HOMEPAGE */
+ };
+
+ button@1 {
+ linux,code = <139>; /* KEY_MENU */
+ };
+
+ button@2 {
+ linux,code = <158>; /* KEY_BACK */
+ };
+
+ button@3 {
+ linux,code = <217>; /* KEY_SEARCH */
+ };
+
+ button@4 {
+ linux,code = <114>; /* KEY_VOLUMEDOWN */
+ };
+
+ button@5 {
+ linux,code = <115>; /* KEY_VOLUMEUP */
+ };
+
+ button@6 {
+ linux,code = <212>; /* KEY_CAMERA */
+ };
+
+ button@7 {
+ linux,code = <116>; /* KEY_POWER */
+ };
+ };
+};
+
&snvs_pwrkey {
status = "okay";
};
@@ -125,6 +190,29 @@ MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x14
>;
};
+ pinctrl_touch: touchgrp {
+ fsl,pins = <
+ /* CYTTSP interrupt */
+ MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x54
+ /* CYTTSP reset */
+ MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x04
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f
+ MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_touch_reg: touchreggrp {
+ fsl,pins = <
+ /* TOUCH_PWR_EN */
+ MX7D_PAD_GPIO1_IO11__GPIO1_IO11 0x14
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
--
2.31.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 25+ messages in thread
* Re: [PATCH 2/4] Documentation: DT: bindings: input: Add documentation for cyttsp5
2021-10-25 11:42 ` Alistair Francis
@ 2021-10-25 18:16 ` Rob Herring
-1 siblings, 0 replies; 25+ messages in thread
From: Rob Herring @ 2021-10-25 18:16 UTC (permalink / raw)
To: Alistair Francis
Cc: devicetree, linux-kernel, andreas, linux-arm-kernel, linux-input,
dmitry.torokhov, robh+dt, mylene.josserand, linus.walleij,
rydberg, alistair23
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1838 bytes --]
On Mon, 25 Oct 2021 21:42:12 +1000, Alistair Francis wrote:
> From: Mylène Josserand <mylene.josserand@free-electrons.com>
>
> Add the Cypress TrueTouch Generation 5 touchscreen device tree bindings
> documentation. It can use I2C or SPI bus.
> This touchscreen can handle some defined zone that are designed and
> sent as button. To be able to customize the keycode sent, the
> "linux,code" property in a "button" sub-node can be used.
>
> Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
> Message-Id: <20170529144538.29187-3-mylene.josserand@free-electrons.com>
> Signed-off-by: Alistair Francis <alistair@alistair23.me>
> ---
> .../input/touchscreen/cypress,cyttsp5.yaml | 72 +++++++++++++++++++
> 1 file changed, 72 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/input/touchscreen/cypress,cyttsp5.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
Error: Documentation/devicetree/bindings/input/touchscreen/cypress,cyttsp5.example.dts:29.35-36 syntax error
FATAL ERROR: Unable to parse input tree
make[1]: *** [scripts/Makefile.lib:385: Documentation/devicetree/bindings/input/touchscreen/cypress,cyttsp5.example.dt.yaml] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1441: dt_binding_check] Error 2
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/patch/1545697
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 2/4] Documentation: DT: bindings: input: Add documentation for cyttsp5
@ 2021-10-25 18:16 ` Rob Herring
0 siblings, 0 replies; 25+ messages in thread
From: Rob Herring @ 2021-10-25 18:16 UTC (permalink / raw)
To: Alistair Francis
Cc: devicetree, linux-kernel, andreas, linux-arm-kernel, linux-input,
dmitry.torokhov, robh+dt, mylene.josserand, linus.walleij,
rydberg, alistair23
[-- Attachment #1: Type: text/plain, Size: 1839 bytes --]
On Mon, 25 Oct 2021 21:42:12 +1000, Alistair Francis wrote:
> From: Mylène Josserand <mylene.josserand@free-electrons.com>
>
> Add the Cypress TrueTouch Generation 5 touchscreen device tree bindings
> documentation. It can use I2C or SPI bus.
> This touchscreen can handle some defined zone that are designed and
> sent as button. To be able to customize the keycode sent, the
> "linux,code" property in a "button" sub-node can be used.
>
> Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
> Message-Id: <20170529144538.29187-3-mylene.josserand@free-electrons.com>
> Signed-off-by: Alistair Francis <alistair@alistair23.me>
> ---
> .../input/touchscreen/cypress,cyttsp5.yaml | 72 +++++++++++++++++++
> 1 file changed, 72 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/input/touchscreen/cypress,cyttsp5.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
Error: Documentation/devicetree/bindings/input/touchscreen/cypress,cyttsp5.example.dts:29.35-36 syntax error
FATAL ERROR: Unable to parse input tree
make[1]: *** [scripts/Makefile.lib:385: Documentation/devicetree/bindings/input/touchscreen/cypress,cyttsp5.example.dt.yaml] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1441: dt_binding_check] Error 2
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/patch/1545697
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 1/4] Input: Add driver for Cypress Generation 5 touchscreen
2021-10-25 11:42 ` Alistair Francis
@ 2021-10-25 20:10 ` Randy Dunlap
-1 siblings, 0 replies; 25+ messages in thread
From: Randy Dunlap @ 2021-10-25 20:10 UTC (permalink / raw)
To: Alistair Francis, linux-arm-kernel, devicetree, linux-kernel,
linux-input
Cc: andreas, alistair23, dmitry.torokhov, linus.walleij, robh+dt,
rydberg, mylene.josserand, Mylène Josserand, Maxime Ripard
On 10/25/21 4:42 AM, Alistair Francis wrote:
> diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
> index d4e74738c5a8..231cb0c1750b 100644
> --- a/drivers/input/touchscreen/Kconfig
> +++ b/drivers/input/touchscreen/Kconfig
> @@ -284,6 +284,20 @@ config TOUCHSCREEN_CYTTSP4_SPI
> To compile this driver as a module, choose M here: the
> module will be called cyttsp4_spi.
>
> +config TOUCHSCREEN_CYTTSP5
> + tristate "Cypress TrueTouch Gen5 Touchscreen Driver"
> + depends on OF
> + select REGMAP_I2C
> + select CRC_ITU_T
> + help
> + Driver for Parade TrueTouch Standard Product
> + Generation 5 touchscreen controllers.
> + I2C bus interface support only.
> + Say Y here if you have a Cypress Gen5 touchscreen.
> + If unsure, say N.
> + To compile this driver as a module, choose M here: the
> + module will be called cyttsp5.
Hi,
Why is there no line:
depends on I2C
here?
thanks.
--
~Randy
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 1/4] Input: Add driver for Cypress Generation 5 touchscreen
@ 2021-10-25 20:10 ` Randy Dunlap
0 siblings, 0 replies; 25+ messages in thread
From: Randy Dunlap @ 2021-10-25 20:10 UTC (permalink / raw)
To: Alistair Francis, linux-arm-kernel, devicetree, linux-kernel,
linux-input
Cc: andreas, alistair23, dmitry.torokhov, linus.walleij, robh+dt,
rydberg, mylene.josserand, Mylène Josserand, Maxime Ripard
On 10/25/21 4:42 AM, Alistair Francis wrote:
> diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
> index d4e74738c5a8..231cb0c1750b 100644
> --- a/drivers/input/touchscreen/Kconfig
> +++ b/drivers/input/touchscreen/Kconfig
> @@ -284,6 +284,20 @@ config TOUCHSCREEN_CYTTSP4_SPI
> To compile this driver as a module, choose M here: the
> module will be called cyttsp4_spi.
>
> +config TOUCHSCREEN_CYTTSP5
> + tristate "Cypress TrueTouch Gen5 Touchscreen Driver"
> + depends on OF
> + select REGMAP_I2C
> + select CRC_ITU_T
> + help
> + Driver for Parade TrueTouch Standard Product
> + Generation 5 touchscreen controllers.
> + I2C bus interface support only.
> + Say Y here if you have a Cypress Gen5 touchscreen.
> + If unsure, say N.
> + To compile this driver as a module, choose M here: the
> + module will be called cyttsp5.
Hi,
Why is there no line:
depends on I2C
here?
thanks.
--
~Randy
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 2/4] Documentation: DT: bindings: input: Add documentation for cyttsp5
2021-10-25 11:42 ` Alistair Francis
@ 2021-10-25 23:18 ` Linus Walleij
-1 siblings, 0 replies; 25+ messages in thread
From: Linus Walleij @ 2021-10-25 23:18 UTC (permalink / raw)
To: Alistair Francis
Cc: Linux ARM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-kernel, Linux Input, Andreas Kemnade, alistair23,
Dmitry Torokhov, Rob Herring, Henrik Rydberg, Mylene Josserand
Hi Alistair,
On Mon, Oct 25, 2021 at 1:42 PM Alistair Francis <alistair@alistair23.me> wrote:
> From: Mylène Josserand <mylene.josserand@free-electrons.com>
>
> Add the Cypress TrueTouch Generation 5 touchscreen device tree bindings
> documentation. It can use I2C or SPI bus.
> This touchscreen can handle some defined zone that are designed and
> sent as button. To be able to customize the keycode sent, the
> "linux,code" property in a "button" sub-node can be used.
>
> Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
> Message-Id: <20170529144538.29187-3-mylene.josserand@free-electrons.com>
> Signed-off-by: Alistair Francis <alistair@alistair23.me>
> +title: Cypress cyttsp touchscreen controller, generation 5
(...)
> + compatible:
> + const: cypress,cyttsp5
Is this the real product name? When I rewrote the bindings for
the original "CYTTSP", actually "Cypress TrueTouch Standard Product"
it came out that the actual product names were CY8CTMA340
and CY8CTMA341. "CYTTSP" was a marketing name for the
whole family.
See
Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml
If the actual products have some product names such as
CY8* then use these as compatibles instead and just write in the
decription that it is Cypress TrueTouch Standard Product series 5.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 2/4] Documentation: DT: bindings: input: Add documentation for cyttsp5
@ 2021-10-25 23:18 ` Linus Walleij
0 siblings, 0 replies; 25+ messages in thread
From: Linus Walleij @ 2021-10-25 23:18 UTC (permalink / raw)
To: Alistair Francis
Cc: Linux ARM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-kernel, Linux Input, Andreas Kemnade, alistair23,
Dmitry Torokhov, Rob Herring, Henrik Rydberg, Mylene Josserand
Hi Alistair,
On Mon, Oct 25, 2021 at 1:42 PM Alistair Francis <alistair@alistair23.me> wrote:
> From: Mylène Josserand <mylene.josserand@free-electrons.com>
>
> Add the Cypress TrueTouch Generation 5 touchscreen device tree bindings
> documentation. It can use I2C or SPI bus.
> This touchscreen can handle some defined zone that are designed and
> sent as button. To be able to customize the keycode sent, the
> "linux,code" property in a "button" sub-node can be used.
>
> Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
> Message-Id: <20170529144538.29187-3-mylene.josserand@free-electrons.com>
> Signed-off-by: Alistair Francis <alistair@alistair23.me>
> +title: Cypress cyttsp touchscreen controller, generation 5
(...)
> + compatible:
> + const: cypress,cyttsp5
Is this the real product name? When I rewrote the bindings for
the original "CYTTSP", actually "Cypress TrueTouch Standard Product"
it came out that the actual product names were CY8CTMA340
and CY8CTMA341. "CYTTSP" was a marketing name for the
whole family.
See
Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml
If the actual products have some product names such as
CY8* then use these as compatibles instead and just write in the
decription that it is Cypress TrueTouch Standard Product series 5.
Yours,
Linus Walleij
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 2/4] Documentation: DT: bindings: input: Add documentation for cyttsp5
2021-10-25 23:18 ` Linus Walleij
@ 2021-10-26 7:16 ` Andreas Kemnade
-1 siblings, 0 replies; 25+ messages in thread
From: Andreas Kemnade @ 2021-10-26 7:16 UTC (permalink / raw)
To: Linus Walleij
Cc: Alistair Francis, Linux ARM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-kernel, Linux Input, alistair23, Dmitry Torokhov,
Rob Herring, Henrik Rydberg, Mylene Josserand
On Tue, 26 Oct 2021 01:18:24 +0200
Linus Walleij <linus.walleij@linaro.org> wrote:
> Hi Alistair,
>
> On Mon, Oct 25, 2021 at 1:42 PM Alistair Francis <alistair@alistair23.me> wrote:
>
> > From: Mylène Josserand <mylene.josserand@free-electrons.com>
> >
> > Add the Cypress TrueTouch Generation 5 touchscreen device tree bindings
> > documentation. It can use I2C or SPI bus.
> > This touchscreen can handle some defined zone that are designed and
> > sent as button. To be able to customize the keycode sent, the
> > "linux,code" property in a "button" sub-node can be used.
> >
> > Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
> > Message-Id: <20170529144538.29187-3-mylene.josserand@free-electrons.com>
> > Signed-off-by: Alistair Francis <alistair@alistair23.me>
>
> > +title: Cypress cyttsp touchscreen controller, generation 5
> (...)
> > + compatible:
> > + const: cypress,cyttsp5
>
> Is this the real product name? When I rewrote the bindings for
> the original "CYTTSP", actually "Cypress TrueTouch Standard Product"
> it came out that the actual product names were CY8CTMA340
> and CY8CTMA341. "CYTTSP" was a marketing name for the
> whole family.
>
> See
> Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml
>
> If the actual products have some product names such as
> CY8* then use these as compatibles instead and just write in the
> decription that it is Cypress TrueTouch Standard Product series 5.
>
Since I have uptreamed 4 devicetrees containing that touchscreen (and
marked that as todo). I tried to look it up:
https://fccid.io/NOIKBN249/Internal-Photos/Internal-Photos-3802584.pdf
Page 4 might be interesting. Something below that 3d code (zbarimg does
not recognize it) Peeling up the label reveals:
TT21000
-44LQI
1802 TWN
6491U0 (two illegible characters)
You find it in the net:
https://www.digipart.com/part/TT21000-48LQI36T
Regards,
Andreas
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 2/4] Documentation: DT: bindings: input: Add documentation for cyttsp5
@ 2021-10-26 7:16 ` Andreas Kemnade
0 siblings, 0 replies; 25+ messages in thread
From: Andreas Kemnade @ 2021-10-26 7:16 UTC (permalink / raw)
To: Linus Walleij
Cc: Alistair Francis, Linux ARM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-kernel, Linux Input, alistair23, Dmitry Torokhov,
Rob Herring, Henrik Rydberg, Mylene Josserand
On Tue, 26 Oct 2021 01:18:24 +0200
Linus Walleij <linus.walleij@linaro.org> wrote:
> Hi Alistair,
>
> On Mon, Oct 25, 2021 at 1:42 PM Alistair Francis <alistair@alistair23.me> wrote:
>
> > From: Mylène Josserand <mylene.josserand@free-electrons.com>
> >
> > Add the Cypress TrueTouch Generation 5 touchscreen device tree bindings
> > documentation. It can use I2C or SPI bus.
> > This touchscreen can handle some defined zone that are designed and
> > sent as button. To be able to customize the keycode sent, the
> > "linux,code" property in a "button" sub-node can be used.
> >
> > Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
> > Message-Id: <20170529144538.29187-3-mylene.josserand@free-electrons.com>
> > Signed-off-by: Alistair Francis <alistair@alistair23.me>
>
> > +title: Cypress cyttsp touchscreen controller, generation 5
> (...)
> > + compatible:
> > + const: cypress,cyttsp5
>
> Is this the real product name? When I rewrote the bindings for
> the original "CYTTSP", actually "Cypress TrueTouch Standard Product"
> it came out that the actual product names were CY8CTMA340
> and CY8CTMA341. "CYTTSP" was a marketing name for the
> whole family.
>
> See
> Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml
>
> If the actual products have some product names such as
> CY8* then use these as compatibles instead and just write in the
> decription that it is Cypress TrueTouch Standard Product series 5.
>
Since I have uptreamed 4 devicetrees containing that touchscreen (and
marked that as todo). I tried to look it up:
https://fccid.io/NOIKBN249/Internal-Photos/Internal-Photos-3802584.pdf
Page 4 might be interesting. Something below that 3d code (zbarimg does
not recognize it) Peeling up the label reveals:
TT21000
-44LQI
1802 TWN
6491U0 (two illegible characters)
You find it in the net:
https://www.digipart.com/part/TT21000-48LQI36T
Regards,
Andreas
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 1/4] Input: Add driver for Cypress Generation 5 touchscreen
2021-10-25 11:42 ` Alistair Francis
(?)
@ 2021-10-27 3:45 ` kernel test robot
-1 siblings, 0 replies; 25+ messages in thread
From: kernel test robot @ 2021-10-27 3:45 UTC (permalink / raw)
To: Alistair Francis, linux-arm-kernel, devicetree, linux-kernel,
linux-input
Cc: kbuild-all, andreas, alistair23, dmitry.torokhov, linus.walleij,
robh+dt, rydberg
[-- Attachment #1: Type: text/plain, Size: 7290 bytes --]
Hi Alistair,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on arm/for-next]
[also build test WARNING on xilinx-xlnx/master soc/for-next rockchip/for-next arm64/for-next/core shawnguo/for-next clk/clk-next linus/master keystone/next v5.15-rc7 next-20211026]
[cannot apply to dtor-input/next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Alistair-Francis/Add-support-for-the-Cypress-cyttsp5/20211025-194449
base: git://git.armlinux.org.uk/~rmk/linux-arm.git for-next
config: sparc-randconfig-m031-20211027 (attached as .config)
compiler: sparc-linux-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/0709ecf257374af4472f599dddb75dc13e7e46c9
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Alistair-Francis/Add-support-for-the-Cypress-cyttsp5/20211025-194449
git checkout 0709ecf257374af4472f599dddb75dc13e7e46c9
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross ARCH=sparc
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
drivers/input/touchscreen/cyttsp5.c: In function 'cyttsp5_write':
>> drivers/input/touchscreen/cyttsp5.c:243:9: warning: ISO C90 forbids variable length array 'cmd' [-Wvla]
243 | u8 cmd[size + 1];
| ^~
drivers/input/touchscreen/cyttsp5.c: In function 'cyttsp5_get_touch_axis':
>> drivers/input/touchscreen/cyttsp5.c:305:13: warning: variable 'next' set but not used [-Wunused-but-set-variable]
305 | int next;
| ^~~~
drivers/input/touchscreen/cyttsp5.c: In function 'cyttsp5_get_mt_touches':
>> drivers/input/touchscreen/cyttsp5.c:333:9: warning: ISO C90 forbids variable length array 'ids' [-Wvla]
333 | DECLARE_BITMAP(ids, si->tch_abs[CY_TCH_T].max);
| ^~~~~~~~~~~~~~
vim +/cmd +243 drivers/input/touchscreen/cyttsp5.c
239
240 static int cyttsp5_write(struct cyttsp5 *ts, unsigned int reg, u8 *data,
241 size_t size)
242 {
> 243 u8 cmd[size + 1];
244
245 /* High bytes of register address needed as first byte of cmd */
246 cmd[0] = HI_BYTE(reg);
247
248 /* Copy the rest of the data */
249 if (data)
250 memcpy(&cmd[1], data, size);
251
252 /* The hardware wants to receive a frame with the address register
253 * contains in the first two bytes. As the regmap_write function
254 * add the register adresse in the frame, we use the LOW_BYTE as
255 * first frame byte for the address register and the first
256 * data byte is the high register + left of the cmd to send
257 */
258 return regmap_bulk_write(ts->regmap, LOW_BYTE(reg), cmd, size + 1);
259 }
260
261 static void cyttsp5_final_sync(struct input_dev *input, int max_slots,
262 unsigned long *ids)
263 {
264 int t;
265
266 for (t = 0; t < max_slots; t++) {
267 if (test_bit(t, ids))
268 continue;
269 input_mt_slot(input, t);
270 input_mt_report_slot_state(input, MT_TOOL_FINGER, false);
271 }
272
273 input_sync(input);
274 }
275
276 static void cyttsp5_report_slot_liftoff(struct cyttsp5 *ts, int max_slots)
277 {
278 int t;
279
280 if (ts->num_prv_rec == 0)
281 return;
282
283 for (t = 0; t < max_slots; t++) {
284 input_mt_slot(ts->input, t);
285 input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, false);
286 }
287 }
288
289 static void cyttsp5_mt_lift_all(struct cyttsp5 *ts)
290 {
291 struct cyttsp5_sysinfo *si = &ts->sysinfo;
292 int max = si->tch_abs[CY_TCH_T].max;
293
294 if (ts->num_prv_rec != 0) {
295 cyttsp5_report_slot_liftoff(ts, max);
296 input_sync(ts->input);
297 ts->num_prv_rec = 0;
298 }
299 }
300
301 static void cyttsp5_get_touch_axis(int *axis, int size, int max, u8 *xy_data,
302 int bofs)
303 {
304 int nbyte;
> 305 int next;
306
307 for (nbyte = 0, *axis = 0, next = 0; nbyte < size; nbyte++)
308 *axis = *axis + ((xy_data[nbyte] >> bofs) << (nbyte * 8));
309
310 *axis &= max - 1;
311 }
312
313 static void cyttsp5_get_touch_record(struct cyttsp5 *ts,
314 struct cyttsp5_touch *touch, u8 *xy_data)
315 {
316 struct cyttsp5_sysinfo *si = &ts->sysinfo;
317 enum cyttsp5_tch_abs abs;
318
319 for (abs = CY_TCH_X; abs < CY_TCH_NUM_ABS; abs++) {
320 cyttsp5_get_touch_axis(&touch->abs[abs],
321 si->tch_abs[abs].size,
322 si->tch_abs[abs].max,
323 xy_data + si->tch_abs[abs].ofs,
324 si->tch_abs[abs].bofs);
325 }
326 }
327
328 static void cyttsp5_get_mt_touches(struct cyttsp5 *ts,
329 struct cyttsp5_touch *tch, int num_cur_tch)
330 {
331 struct cyttsp5_sysinfo *si = &ts->sysinfo;
332 int i, t = 0;
> 333 DECLARE_BITMAP(ids, si->tch_abs[CY_TCH_T].max);
334 u8 *tch_addr;
335 int tmp;
336
337 bitmap_zero(ids, si->tch_abs[CY_TCH_T].max);
338 memset(tch->abs, 0, sizeof(tch->abs));
339
340 for (i = 0; i < num_cur_tch; i++) {
341 tch_addr = si->xy_data + (i * TOUCH_REPORT_SIZE);
342 cyttsp5_get_touch_record(ts, tch, tch_addr);
343
344 /* Convert MAJOR/MINOR from mm to resolution */
345 tmp = tch->abs[CY_TCH_MAJ] * 100 * si->sensing_conf_data.res_x;
346 tch->abs[CY_TCH_MAJ] = tmp / si->sensing_conf_data.len_x;
347 tmp = tch->abs[CY_TCH_MIN] * 100 * si->sensing_conf_data.res_x;
348 tch->abs[CY_TCH_MIN] = tmp / si->sensing_conf_data.len_x;
349
350 t = tch->abs[CY_TCH_T];
351 input_mt_slot(ts->input, t);
352 input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, true);
353 __set_bit(t, ids);
354
355 /* position and pressure fields */
356 input_report_abs(ts->input, ABS_MT_POSITION_X,
357 tch->abs[CY_TCH_X]);
358 input_report_abs(ts->input, ABS_MT_POSITION_Y,
359 tch->abs[CY_TCH_Y]);
360 input_report_abs(ts->input, ABS_MT_PRESSURE,
361 tch->abs[CY_TCH_P]);
362
363 /* Get the extended touch fields */
364 input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR,
365 tch->abs[CY_TCH_MAJ]);
366 input_report_abs(ts->input, ABS_MT_TOUCH_MINOR,
367 tch->abs[CY_TCH_MIN]);
368
369 touchscreen_report_pos(ts->input, &ts->prop,
370 tch->abs[CY_TCH_X], tch->abs[CY_TCH_Y],
371 true);
372 }
373
374 cyttsp5_final_sync(ts->input, si->tch_abs[CY_TCH_T].max, ids);
375
376 ts->num_prv_rec = num_cur_tch;
377 }
378
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 31091 bytes --]
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 1/4] Input: Add driver for Cypress Generation 5 touchscreen
@ 2021-10-27 3:45 ` kernel test robot
0 siblings, 0 replies; 25+ messages in thread
From: kernel test robot @ 2021-10-27 3:45 UTC (permalink / raw)
To: Alistair Francis, linux-arm-kernel, devicetree, linux-kernel,
linux-input
Cc: kbuild-all, andreas, alistair23, dmitry.torokhov, linus.walleij,
robh+dt, rydberg
[-- Attachment #1: Type: text/plain, Size: 7290 bytes --]
Hi Alistair,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on arm/for-next]
[also build test WARNING on xilinx-xlnx/master soc/for-next rockchip/for-next arm64/for-next/core shawnguo/for-next clk/clk-next linus/master keystone/next v5.15-rc7 next-20211026]
[cannot apply to dtor-input/next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Alistair-Francis/Add-support-for-the-Cypress-cyttsp5/20211025-194449
base: git://git.armlinux.org.uk/~rmk/linux-arm.git for-next
config: sparc-randconfig-m031-20211027 (attached as .config)
compiler: sparc-linux-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/0709ecf257374af4472f599dddb75dc13e7e46c9
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Alistair-Francis/Add-support-for-the-Cypress-cyttsp5/20211025-194449
git checkout 0709ecf257374af4472f599dddb75dc13e7e46c9
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross ARCH=sparc
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
drivers/input/touchscreen/cyttsp5.c: In function 'cyttsp5_write':
>> drivers/input/touchscreen/cyttsp5.c:243:9: warning: ISO C90 forbids variable length array 'cmd' [-Wvla]
243 | u8 cmd[size + 1];
| ^~
drivers/input/touchscreen/cyttsp5.c: In function 'cyttsp5_get_touch_axis':
>> drivers/input/touchscreen/cyttsp5.c:305:13: warning: variable 'next' set but not used [-Wunused-but-set-variable]
305 | int next;
| ^~~~
drivers/input/touchscreen/cyttsp5.c: In function 'cyttsp5_get_mt_touches':
>> drivers/input/touchscreen/cyttsp5.c:333:9: warning: ISO C90 forbids variable length array 'ids' [-Wvla]
333 | DECLARE_BITMAP(ids, si->tch_abs[CY_TCH_T].max);
| ^~~~~~~~~~~~~~
vim +/cmd +243 drivers/input/touchscreen/cyttsp5.c
239
240 static int cyttsp5_write(struct cyttsp5 *ts, unsigned int reg, u8 *data,
241 size_t size)
242 {
> 243 u8 cmd[size + 1];
244
245 /* High bytes of register address needed as first byte of cmd */
246 cmd[0] = HI_BYTE(reg);
247
248 /* Copy the rest of the data */
249 if (data)
250 memcpy(&cmd[1], data, size);
251
252 /* The hardware wants to receive a frame with the address register
253 * contains in the first two bytes. As the regmap_write function
254 * add the register adresse in the frame, we use the LOW_BYTE as
255 * first frame byte for the address register and the first
256 * data byte is the high register + left of the cmd to send
257 */
258 return regmap_bulk_write(ts->regmap, LOW_BYTE(reg), cmd, size + 1);
259 }
260
261 static void cyttsp5_final_sync(struct input_dev *input, int max_slots,
262 unsigned long *ids)
263 {
264 int t;
265
266 for (t = 0; t < max_slots; t++) {
267 if (test_bit(t, ids))
268 continue;
269 input_mt_slot(input, t);
270 input_mt_report_slot_state(input, MT_TOOL_FINGER, false);
271 }
272
273 input_sync(input);
274 }
275
276 static void cyttsp5_report_slot_liftoff(struct cyttsp5 *ts, int max_slots)
277 {
278 int t;
279
280 if (ts->num_prv_rec == 0)
281 return;
282
283 for (t = 0; t < max_slots; t++) {
284 input_mt_slot(ts->input, t);
285 input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, false);
286 }
287 }
288
289 static void cyttsp5_mt_lift_all(struct cyttsp5 *ts)
290 {
291 struct cyttsp5_sysinfo *si = &ts->sysinfo;
292 int max = si->tch_abs[CY_TCH_T].max;
293
294 if (ts->num_prv_rec != 0) {
295 cyttsp5_report_slot_liftoff(ts, max);
296 input_sync(ts->input);
297 ts->num_prv_rec = 0;
298 }
299 }
300
301 static void cyttsp5_get_touch_axis(int *axis, int size, int max, u8 *xy_data,
302 int bofs)
303 {
304 int nbyte;
> 305 int next;
306
307 for (nbyte = 0, *axis = 0, next = 0; nbyte < size; nbyte++)
308 *axis = *axis + ((xy_data[nbyte] >> bofs) << (nbyte * 8));
309
310 *axis &= max - 1;
311 }
312
313 static void cyttsp5_get_touch_record(struct cyttsp5 *ts,
314 struct cyttsp5_touch *touch, u8 *xy_data)
315 {
316 struct cyttsp5_sysinfo *si = &ts->sysinfo;
317 enum cyttsp5_tch_abs abs;
318
319 for (abs = CY_TCH_X; abs < CY_TCH_NUM_ABS; abs++) {
320 cyttsp5_get_touch_axis(&touch->abs[abs],
321 si->tch_abs[abs].size,
322 si->tch_abs[abs].max,
323 xy_data + si->tch_abs[abs].ofs,
324 si->tch_abs[abs].bofs);
325 }
326 }
327
328 static void cyttsp5_get_mt_touches(struct cyttsp5 *ts,
329 struct cyttsp5_touch *tch, int num_cur_tch)
330 {
331 struct cyttsp5_sysinfo *si = &ts->sysinfo;
332 int i, t = 0;
> 333 DECLARE_BITMAP(ids, si->tch_abs[CY_TCH_T].max);
334 u8 *tch_addr;
335 int tmp;
336
337 bitmap_zero(ids, si->tch_abs[CY_TCH_T].max);
338 memset(tch->abs, 0, sizeof(tch->abs));
339
340 for (i = 0; i < num_cur_tch; i++) {
341 tch_addr = si->xy_data + (i * TOUCH_REPORT_SIZE);
342 cyttsp5_get_touch_record(ts, tch, tch_addr);
343
344 /* Convert MAJOR/MINOR from mm to resolution */
345 tmp = tch->abs[CY_TCH_MAJ] * 100 * si->sensing_conf_data.res_x;
346 tch->abs[CY_TCH_MAJ] = tmp / si->sensing_conf_data.len_x;
347 tmp = tch->abs[CY_TCH_MIN] * 100 * si->sensing_conf_data.res_x;
348 tch->abs[CY_TCH_MIN] = tmp / si->sensing_conf_data.len_x;
349
350 t = tch->abs[CY_TCH_T];
351 input_mt_slot(ts->input, t);
352 input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, true);
353 __set_bit(t, ids);
354
355 /* position and pressure fields */
356 input_report_abs(ts->input, ABS_MT_POSITION_X,
357 tch->abs[CY_TCH_X]);
358 input_report_abs(ts->input, ABS_MT_POSITION_Y,
359 tch->abs[CY_TCH_Y]);
360 input_report_abs(ts->input, ABS_MT_PRESSURE,
361 tch->abs[CY_TCH_P]);
362
363 /* Get the extended touch fields */
364 input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR,
365 tch->abs[CY_TCH_MAJ]);
366 input_report_abs(ts->input, ABS_MT_TOUCH_MINOR,
367 tch->abs[CY_TCH_MIN]);
368
369 touchscreen_report_pos(ts->input, &ts->prop,
370 tch->abs[CY_TCH_X], tch->abs[CY_TCH_Y],
371 true);
372 }
373
374 cyttsp5_final_sync(ts->input, si->tch_abs[CY_TCH_T].max, ids);
375
376 ts->num_prv_rec = num_cur_tch;
377 }
378
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 31091 bytes --]
[-- Attachment #3: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 1/4] Input: Add driver for Cypress Generation 5 touchscreen
@ 2021-10-27 3:45 ` kernel test robot
0 siblings, 0 replies; 25+ messages in thread
From: kernel test robot @ 2021-10-27 3:45 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 7482 bytes --]
Hi Alistair,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on arm/for-next]
[also build test WARNING on xilinx-xlnx/master soc/for-next rockchip/for-next arm64/for-next/core shawnguo/for-next clk/clk-next linus/master keystone/next v5.15-rc7 next-20211026]
[cannot apply to dtor-input/next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Alistair-Francis/Add-support-for-the-Cypress-cyttsp5/20211025-194449
base: git://git.armlinux.org.uk/~rmk/linux-arm.git for-next
config: sparc-randconfig-m031-20211027 (attached as .config)
compiler: sparc-linux-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/0709ecf257374af4472f599dddb75dc13e7e46c9
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Alistair-Francis/Add-support-for-the-Cypress-cyttsp5/20211025-194449
git checkout 0709ecf257374af4472f599dddb75dc13e7e46c9
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross ARCH=sparc
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
drivers/input/touchscreen/cyttsp5.c: In function 'cyttsp5_write':
>> drivers/input/touchscreen/cyttsp5.c:243:9: warning: ISO C90 forbids variable length array 'cmd' [-Wvla]
243 | u8 cmd[size + 1];
| ^~
drivers/input/touchscreen/cyttsp5.c: In function 'cyttsp5_get_touch_axis':
>> drivers/input/touchscreen/cyttsp5.c:305:13: warning: variable 'next' set but not used [-Wunused-but-set-variable]
305 | int next;
| ^~~~
drivers/input/touchscreen/cyttsp5.c: In function 'cyttsp5_get_mt_touches':
>> drivers/input/touchscreen/cyttsp5.c:333:9: warning: ISO C90 forbids variable length array 'ids' [-Wvla]
333 | DECLARE_BITMAP(ids, si->tch_abs[CY_TCH_T].max);
| ^~~~~~~~~~~~~~
vim +/cmd +243 drivers/input/touchscreen/cyttsp5.c
239
240 static int cyttsp5_write(struct cyttsp5 *ts, unsigned int reg, u8 *data,
241 size_t size)
242 {
> 243 u8 cmd[size + 1];
244
245 /* High bytes of register address needed as first byte of cmd */
246 cmd[0] = HI_BYTE(reg);
247
248 /* Copy the rest of the data */
249 if (data)
250 memcpy(&cmd[1], data, size);
251
252 /* The hardware wants to receive a frame with the address register
253 * contains in the first two bytes. As the regmap_write function
254 * add the register adresse in the frame, we use the LOW_BYTE as
255 * first frame byte for the address register and the first
256 * data byte is the high register + left of the cmd to send
257 */
258 return regmap_bulk_write(ts->regmap, LOW_BYTE(reg), cmd, size + 1);
259 }
260
261 static void cyttsp5_final_sync(struct input_dev *input, int max_slots,
262 unsigned long *ids)
263 {
264 int t;
265
266 for (t = 0; t < max_slots; t++) {
267 if (test_bit(t, ids))
268 continue;
269 input_mt_slot(input, t);
270 input_mt_report_slot_state(input, MT_TOOL_FINGER, false);
271 }
272
273 input_sync(input);
274 }
275
276 static void cyttsp5_report_slot_liftoff(struct cyttsp5 *ts, int max_slots)
277 {
278 int t;
279
280 if (ts->num_prv_rec == 0)
281 return;
282
283 for (t = 0; t < max_slots; t++) {
284 input_mt_slot(ts->input, t);
285 input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, false);
286 }
287 }
288
289 static void cyttsp5_mt_lift_all(struct cyttsp5 *ts)
290 {
291 struct cyttsp5_sysinfo *si = &ts->sysinfo;
292 int max = si->tch_abs[CY_TCH_T].max;
293
294 if (ts->num_prv_rec != 0) {
295 cyttsp5_report_slot_liftoff(ts, max);
296 input_sync(ts->input);
297 ts->num_prv_rec = 0;
298 }
299 }
300
301 static void cyttsp5_get_touch_axis(int *axis, int size, int max, u8 *xy_data,
302 int bofs)
303 {
304 int nbyte;
> 305 int next;
306
307 for (nbyte = 0, *axis = 0, next = 0; nbyte < size; nbyte++)
308 *axis = *axis + ((xy_data[nbyte] >> bofs) << (nbyte * 8));
309
310 *axis &= max - 1;
311 }
312
313 static void cyttsp5_get_touch_record(struct cyttsp5 *ts,
314 struct cyttsp5_touch *touch, u8 *xy_data)
315 {
316 struct cyttsp5_sysinfo *si = &ts->sysinfo;
317 enum cyttsp5_tch_abs abs;
318
319 for (abs = CY_TCH_X; abs < CY_TCH_NUM_ABS; abs++) {
320 cyttsp5_get_touch_axis(&touch->abs[abs],
321 si->tch_abs[abs].size,
322 si->tch_abs[abs].max,
323 xy_data + si->tch_abs[abs].ofs,
324 si->tch_abs[abs].bofs);
325 }
326 }
327
328 static void cyttsp5_get_mt_touches(struct cyttsp5 *ts,
329 struct cyttsp5_touch *tch, int num_cur_tch)
330 {
331 struct cyttsp5_sysinfo *si = &ts->sysinfo;
332 int i, t = 0;
> 333 DECLARE_BITMAP(ids, si->tch_abs[CY_TCH_T].max);
334 u8 *tch_addr;
335 int tmp;
336
337 bitmap_zero(ids, si->tch_abs[CY_TCH_T].max);
338 memset(tch->abs, 0, sizeof(tch->abs));
339
340 for (i = 0; i < num_cur_tch; i++) {
341 tch_addr = si->xy_data + (i * TOUCH_REPORT_SIZE);
342 cyttsp5_get_touch_record(ts, tch, tch_addr);
343
344 /* Convert MAJOR/MINOR from mm to resolution */
345 tmp = tch->abs[CY_TCH_MAJ] * 100 * si->sensing_conf_data.res_x;
346 tch->abs[CY_TCH_MAJ] = tmp / si->sensing_conf_data.len_x;
347 tmp = tch->abs[CY_TCH_MIN] * 100 * si->sensing_conf_data.res_x;
348 tch->abs[CY_TCH_MIN] = tmp / si->sensing_conf_data.len_x;
349
350 t = tch->abs[CY_TCH_T];
351 input_mt_slot(ts->input, t);
352 input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, true);
353 __set_bit(t, ids);
354
355 /* position and pressure fields */
356 input_report_abs(ts->input, ABS_MT_POSITION_X,
357 tch->abs[CY_TCH_X]);
358 input_report_abs(ts->input, ABS_MT_POSITION_Y,
359 tch->abs[CY_TCH_Y]);
360 input_report_abs(ts->input, ABS_MT_PRESSURE,
361 tch->abs[CY_TCH_P]);
362
363 /* Get the extended touch fields */
364 input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR,
365 tch->abs[CY_TCH_MAJ]);
366 input_report_abs(ts->input, ABS_MT_TOUCH_MINOR,
367 tch->abs[CY_TCH_MIN]);
368
369 touchscreen_report_pos(ts->input, &ts->prop,
370 tch->abs[CY_TCH_X], tch->abs[CY_TCH_Y],
371 true);
372 }
373
374 cyttsp5_final_sync(ts->input, si->tch_abs[CY_TCH_T].max, ids);
375
376 ts->num_prv_rec = num_cur_tch;
377 }
378
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
[-- Attachment #2: config.gz --]
[-- Type: application/gzip, Size: 31091 bytes --]
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 2/4] Documentation: DT: bindings: input: Add documentation for cyttsp5
2021-10-26 7:16 ` Andreas Kemnade
@ 2021-10-27 12:28 ` Alistair Francis
-1 siblings, 0 replies; 25+ messages in thread
From: Alistair Francis @ 2021-10-27 12:28 UTC (permalink / raw)
To: Andreas Kemnade
Cc: Linus Walleij, Alistair Francis, Linux ARM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-kernel, Linux Input, Dmitry Torokhov, Rob Herring,
Henrik Rydberg, Mylene Josserand
On Tue, Oct 26, 2021 at 5:16 PM Andreas Kemnade <andreas@kemnade.info> wrote:
>
> On Tue, 26 Oct 2021 01:18:24 +0200
> Linus Walleij <linus.walleij@linaro.org> wrote:
>
> > Hi Alistair,
> >
> > On Mon, Oct 25, 2021 at 1:42 PM Alistair Francis <alistair@alistair23.me> wrote:
> >
> > > From: Mylène Josserand <mylene.josserand@free-electrons.com>
> > >
> > > Add the Cypress TrueTouch Generation 5 touchscreen device tree bindings
> > > documentation. It can use I2C or SPI bus.
> > > This touchscreen can handle some defined zone that are designed and
> > > sent as button. To be able to customize the keycode sent, the
> > > "linux,code" property in a "button" sub-node can be used.
> > >
> > > Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
> > > Message-Id: <20170529144538.29187-3-mylene.josserand@free-electrons.com>
> > > Signed-off-by: Alistair Francis <alistair@alistair23.me>
> >
> > > +title: Cypress cyttsp touchscreen controller, generation 5
> > (...)
> > > + compatible:
> > > + const: cypress,cyttsp5
> >
> > Is this the real product name? When I rewrote the bindings for
> > the original "CYTTSP", actually "Cypress TrueTouch Standard Product"
> > it came out that the actual product names were CY8CTMA340
> > and CY8CTMA341. "CYTTSP" was a marketing name for the
> > whole family.
> >
> > See
> > Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml
> >
> > If the actual products have some product names such as
> > CY8* then use these as compatibles instead and just write in the
> > decription that it is Cypress TrueTouch Standard Product series 5.
> >
> Since I have uptreamed 4 devicetrees containing that touchscreen (and
> marked that as todo). I tried to look it up:
> https://fccid.io/NOIKBN249/Internal-Photos/Internal-Photos-3802584.pdf
>
> Page 4 might be interesting. Something below that 3d code (zbarimg does
> not recognize it) Peeling up the label reveals:
> TT21000
> -44LQI
> 1802 TWN
> 6491U0 (two illegible characters)
>
> You find it in the net:
> https://www.digipart.com/part/TT21000-48LQI36T
Thanks!
So I'll change the name to cypress,tt21000
Alistair
>
> Regards,
> Andreas
>
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 2/4] Documentation: DT: bindings: input: Add documentation for cyttsp5
@ 2021-10-27 12:28 ` Alistair Francis
0 siblings, 0 replies; 25+ messages in thread
From: Alistair Francis @ 2021-10-27 12:28 UTC (permalink / raw)
To: Andreas Kemnade
Cc: Linus Walleij, Alistair Francis, Linux ARM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-kernel, Linux Input, Dmitry Torokhov, Rob Herring,
Henrik Rydberg, Mylene Josserand
On Tue, Oct 26, 2021 at 5:16 PM Andreas Kemnade <andreas@kemnade.info> wrote:
>
> On Tue, 26 Oct 2021 01:18:24 +0200
> Linus Walleij <linus.walleij@linaro.org> wrote:
>
> > Hi Alistair,
> >
> > On Mon, Oct 25, 2021 at 1:42 PM Alistair Francis <alistair@alistair23.me> wrote:
> >
> > > From: Mylène Josserand <mylene.josserand@free-electrons.com>
> > >
> > > Add the Cypress TrueTouch Generation 5 touchscreen device tree bindings
> > > documentation. It can use I2C or SPI bus.
> > > This touchscreen can handle some defined zone that are designed and
> > > sent as button. To be able to customize the keycode sent, the
> > > "linux,code" property in a "button" sub-node can be used.
> > >
> > > Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
> > > Message-Id: <20170529144538.29187-3-mylene.josserand@free-electrons.com>
> > > Signed-off-by: Alistair Francis <alistair@alistair23.me>
> >
> > > +title: Cypress cyttsp touchscreen controller, generation 5
> > (...)
> > > + compatible:
> > > + const: cypress,cyttsp5
> >
> > Is this the real product name? When I rewrote the bindings for
> > the original "CYTTSP", actually "Cypress TrueTouch Standard Product"
> > it came out that the actual product names were CY8CTMA340
> > and CY8CTMA341. "CYTTSP" was a marketing name for the
> > whole family.
> >
> > See
> > Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml
> >
> > If the actual products have some product names such as
> > CY8* then use these as compatibles instead and just write in the
> > decription that it is Cypress TrueTouch Standard Product series 5.
> >
> Since I have uptreamed 4 devicetrees containing that touchscreen (and
> marked that as todo). I tried to look it up:
> https://fccid.io/NOIKBN249/Internal-Photos/Internal-Photos-3802584.pdf
>
> Page 4 might be interesting. Something below that 3d code (zbarimg does
> not recognize it) Peeling up the label reveals:
> TT21000
> -44LQI
> 1802 TWN
> 6491U0 (two illegible characters)
>
> You find it in the net:
> https://www.digipart.com/part/TT21000-48LQI36T
Thanks!
So I'll change the name to cypress,tt21000
Alistair
>
> Regards,
> Andreas
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 2/4] Documentation: DT: bindings: input: Add documentation for cyttsp5
2021-10-25 11:42 ` Alistair Francis
@ 2021-10-31 16:49 ` Andreas Kemnade
-1 siblings, 0 replies; 25+ messages in thread
From: Andreas Kemnade @ 2021-10-31 16:49 UTC (permalink / raw)
To: Alistair Francis
Cc: linux-arm-kernel, devicetree, linux-kernel, linux-input,
alistair23, dmitry.torokhov, linus.walleij, robh+dt, rydberg,
mylene.josserand
Hi,
On Mon, 25 Oct 2021 21:42:12 +1000
Alistair Francis <alistair@alistair23.me> wrote:
> From: Mylène Josserand <mylene.josserand@free-electrons.com>
>
> Add the Cypress TrueTouch Generation 5 touchscreen device tree bindings
> documentation. It can use I2C or SPI bus.
> This touchscreen can handle some defined zone that are designed and
> sent as button. To be able to customize the keycode sent, the
> "linux,code" property in a "button" sub-node can be used.
>
> Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
> Message-Id: <20170529144538.29187-3-mylene.josserand@free-electrons.com>
> Signed-off-by: Alistair Francis <alistair@alistair23.me>
> ---
> .../input/touchscreen/cypress,cyttsp5.yaml | 72 +++++++++++++++++++
> 1 file changed, 72 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/input/touchscreen/cypress,cyttsp5.yaml
>
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,cyttsp5.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,cyttsp5.yaml
> new file mode 100644
> index 000000000000..0bddbd76a0c3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,cyttsp5.yaml
> @@ -0,0 +1,72 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/input/touchscreen/cypress,cyttsp5.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Cypress cyttsp touchscreen controller, generation 5
> +
> +maintainers:
> + - Alistair Francis <alistair@alistair23.me>
> +
> +allOf:
> + - $ref: touchscreen.yaml#
> +
> +properties:
> + compatible:
> + const: cypress,cyttsp5
> +
you use buttons later, so it should be specified somewhere here.
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + vdd-supply:
> + description: Regulator for voltage.
> +
> + reset-gpios:
> + maxItems: 1
> +
> + linux,code:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: EV_ABS specific event code generated by the axis.
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - vdd-supply
> +
> +additionalProperties: false
If you want to allow things from touchscreen.yaml, you should use
unevaluatedProperties: false.
> +
> +examples:
> + - |
some includes are missing for the constants below here.
> + i2c {
Regards,
Andreas
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 2/4] Documentation: DT: bindings: input: Add documentation for cyttsp5
@ 2021-10-31 16:49 ` Andreas Kemnade
0 siblings, 0 replies; 25+ messages in thread
From: Andreas Kemnade @ 2021-10-31 16:49 UTC (permalink / raw)
To: Alistair Francis
Cc: linux-arm-kernel, devicetree, linux-kernel, linux-input,
alistair23, dmitry.torokhov, linus.walleij, robh+dt, rydberg,
mylene.josserand
Hi,
On Mon, 25 Oct 2021 21:42:12 +1000
Alistair Francis <alistair@alistair23.me> wrote:
> From: Mylène Josserand <mylene.josserand@free-electrons.com>
>
> Add the Cypress TrueTouch Generation 5 touchscreen device tree bindings
> documentation. It can use I2C or SPI bus.
> This touchscreen can handle some defined zone that are designed and
> sent as button. To be able to customize the keycode sent, the
> "linux,code" property in a "button" sub-node can be used.
>
> Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
> Message-Id: <20170529144538.29187-3-mylene.josserand@free-electrons.com>
> Signed-off-by: Alistair Francis <alistair@alistair23.me>
> ---
> .../input/touchscreen/cypress,cyttsp5.yaml | 72 +++++++++++++++++++
> 1 file changed, 72 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/input/touchscreen/cypress,cyttsp5.yaml
>
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,cyttsp5.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,cyttsp5.yaml
> new file mode 100644
> index 000000000000..0bddbd76a0c3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,cyttsp5.yaml
> @@ -0,0 +1,72 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/input/touchscreen/cypress,cyttsp5.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Cypress cyttsp touchscreen controller, generation 5
> +
> +maintainers:
> + - Alistair Francis <alistair@alistair23.me>
> +
> +allOf:
> + - $ref: touchscreen.yaml#
> +
> +properties:
> + compatible:
> + const: cypress,cyttsp5
> +
you use buttons later, so it should be specified somewhere here.
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + vdd-supply:
> + description: Regulator for voltage.
> +
> + reset-gpios:
> + maxItems: 1
> +
> + linux,code:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: EV_ABS specific event code generated by the axis.
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - vdd-supply
> +
> +additionalProperties: false
If you want to allow things from touchscreen.yaml, you should use
unevaluatedProperties: false.
> +
> +examples:
> + - |
some includes are missing for the constants below here.
> + i2c {
Regards,
Andreas
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 25+ messages in thread
end of thread, other threads:[~2021-10-31 16:50 UTC | newest]
Thread overview: 25+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-25 11:42 [PATCH 0/4] Add support for the Cypress cyttsp5 Alistair Francis
2021-10-25 11:42 ` Alistair Francis
2021-10-25 11:42 ` [PATCH 1/4] Input: Add driver for Cypress Generation 5 touchscreen Alistair Francis
2021-10-25 11:42 ` Alistair Francis
2021-10-25 20:10 ` Randy Dunlap
2021-10-25 20:10 ` Randy Dunlap
2021-10-27 3:45 ` kernel test robot
2021-10-27 3:45 ` kernel test robot
2021-10-27 3:45 ` kernel test robot
2021-10-25 11:42 ` [PATCH 2/4] Documentation: DT: bindings: input: Add documentation for cyttsp5 Alistair Francis
2021-10-25 11:42 ` Alistair Francis
2021-10-25 18:16 ` Rob Herring
2021-10-25 18:16 ` Rob Herring
2021-10-25 23:18 ` Linus Walleij
2021-10-25 23:18 ` Linus Walleij
2021-10-26 7:16 ` Andreas Kemnade
2021-10-26 7:16 ` Andreas Kemnade
2021-10-27 12:28 ` Alistair Francis
2021-10-27 12:28 ` Alistair Francis
2021-10-31 16:49 ` Andreas Kemnade
2021-10-31 16:49 ` Andreas Kemnade
2021-10-25 11:42 ` [PATCH 3/4] ARM: imx_v6_v7_defconfig: Enable the cyttsp5 touchscreen Alistair Francis
2021-10-25 11:42 ` Alistair Francis
2021-10-25 11:42 ` [PATCH 4/4] ARM: dts: imx7d: remarkable2: Enable the cyttsp5 Alistair Francis
2021-10-25 11:42 ` Alistair Francis
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.