Hello Sean,

On Thu, Oct 28, 2021 at 10:14:42AM +0100, Sean Young wrote:
> On Thu, Oct 28, 2021 at 08:45:13AM +0200, Uwe Kleine-König wrote:
> > The conversion is right (I think),
> 
> We still have the problem that the pwm drivers calculate the period
> incorrectly by rounding down (except pwm-bcm2835). So the period is not
> as good as it could be in most cases, but this driver can't do anything
> about that.

Yeah, some time ago I started coding a round_state function
(wip at
https://git.pengutronix.de/cgit/ukl/linux/commit/?h=pwm-wip&id=ae348eb6a55d6526f30ef4a49819197d9616391e)
but this was pushed down on my todo-list by more important stuff.

If you want to experiment with that ...

> > note this could be optimized a bit
> > further: state.period only depends on carrier which rarely changes, so
> > the calculation could be done in pwm_ir_set_carrier(). Ditto for duty
> > which only depends on state.period and pwm_ir->duty_cycle. (This is for
> > a separate commit though.)
> 
> I'm not sure what caching this is much of a win. The calculation is a few
> instructions, so you're not winning in the way of speed. On the flip side
> you use more memory since pwm_state has to be kmalloc() rather than existing

I tested a bit with this patch on top of Maíra's:

	diff --git a/drivers/media/rc/pwm-ir-tx.c b/drivers/media/rc/pwm-ir-tx.c
	index 105a9c24f1e3..7585c21775bc 100644
	--- a/drivers/media/rc/pwm-ir-tx.c
	+++ b/drivers/media/rc/pwm-ir-tx.c
	@@ -17,7 +17,7 @@
	 
	 struct pwm_ir {
		struct pwm_device *pwm;
	-	unsigned int carrier;
	+	struct pwm_state state;
		unsigned int duty_cycle;
	 };
	 
	@@ -32,6 +32,7 @@ static int pwm_ir_set_duty_cycle(struct rc_dev *dev, u32 duty_cycle)
		struct pwm_ir *pwm_ir = dev->priv;
	 
		pwm_ir->duty_cycle = duty_cycle;
	+	pwm_set_relative_duty_cycle(&pwm_ir->state, pwm_ir->duty_cycle, 100);
	 
		return 0;
	 }
	@@ -43,7 +44,8 @@ static int pwm_ir_set_carrier(struct rc_dev *dev, u32 carrier)
		if (!carrier)
			return -EINVAL;
	 
	-	pwm_ir->carrier = carrier;
	+	pwm_ir->state.period = DIV_ROUND_CLOSEST(NSEC_PER_SEC, carrier);
	+	pwm_set_relative_duty_cycle(&pwm_ir->state, pwm_ir->duty_cycle, 100);
	 
		return 0;
	 }
	@@ -53,21 +55,15 @@ static int pwm_ir_tx(struct rc_dev *dev, unsigned int *txbuf,
	 {
		struct pwm_ir *pwm_ir = dev->priv;
		struct pwm_device *pwm = pwm_ir->pwm;
	-	struct pwm_state state;
		int i;
		ktime_t edge;
		long delta;
	 
	-	pwm_init_state(pwm, &state);
	-
	-	state.period = DIV_ROUND_CLOSEST(NSEC_PER_SEC, pwm_ir->carrier);
	-	pwm_set_relative_duty_cycle(&state, pwm_ir->duty_cycle, 100);
	-
		edge = ktime_get();
	 
		for (i = 0; i < count; i++) {
	-		state.enabled = !(i % 2);
	-		pwm_apply_state(pwm, &state);
	+		pwm_ir->state.enabled = !(i % 2);
	+		pwm_apply_state(pwm, &pwm_ir->state);
	 
			edge = ktime_add_us(edge, txbuf[i]);
			delta = ktime_us_delta(edge, ktime_get());
	@@ -75,8 +71,8 @@ static int pwm_ir_tx(struct rc_dev *dev, unsigned int *txbuf,
				usleep_range(delta, delta + 10);
		}
	 
	-	state.enabled = false;
	-	pwm_apply_state(pwm, &state);
	+	pwm_ir->state.enabled = false;
	+	pwm_apply_state(pwm, &pwm_ir->state);
	 
		return count;
	 }
	@@ -95,8 +91,9 @@ static int pwm_ir_probe(struct platform_device *pdev)
		if (IS_ERR(pwm_ir->pwm))
			return PTR_ERR(pwm_ir->pwm);
	 
	-	pwm_ir->carrier = 38000;
	-	pwm_ir->duty_cycle = 50;
	+	pwm_ir->state.duty_cycle = 50;
	+	pwm_init_state(pwm_ir->pwm, &pwm_ir->state);
	+	pwm_ir_set_carrier(rcdev, 38000);
	 
		rcdev = devm_rc_allocate_device(&pdev->dev, RC_DRIVER_IR_RAW_TX);
		if (!rcdev)

bloat-o-meter reports (for an arm allmodconfig build)

	add/remove: 0/0 grow/shrink: 3/1 up/down: 644/-396 (248)
	Function                                     old     new   delta
	pwm_ir_probe                                 372     676    +304
	pwm_ir_set_carrier                           108     292    +184
	pwm_ir_set_duty_cycle                         68     224    +156
	pwm_ir_tx                                    908     512    -396
	Total: Before=2302, After=2550, chg +10.77%

struct pwm_ir increases from 12 bytes to 40 bytes.

The stack space required by pwm_ir_tx decreases from 60 to 36

I don't know exactly how kmalloc works internally. Maybe allocating a
structure of size 40 bytes doesn't need more memory than a structure of
size 12?

I didn't check how runtimes change, but the size decrease of pwm_ir_tx()
is nice and might save a bit of runtime.

Probably it depends on your focus if this change is good for you or not.

> just on the stack, and both ioctl handlers and the probe function need to
> recalculate the period/duty cycle, so there is a slight increase in code size.
> 
> This change does not improve anything measurably and only increases code
> complexity.

You did measure?

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |