All of lore.kernel.org
 help / color / mirror / Atom feed
From: Prasanna Vengateshan <prasanna.vengateshan@microchip.com>
To: <andrew@lunn.ch>, <netdev@vger.kernel.org>, <olteanv@gmail.com>,
	<robh+dt@kernel.org>
Cc: <UNGLinuxDriver@microchip.com>, <Woojung.Huh@microchip.com>,
	<hkallweit1@gmail.com>, <linux@armlinux.org.uk>,
	<davem@davemloft.net>, <kuba@kernel.org>,
	<linux-kernel@vger.kernel.org>, <vivien.didelot@gmail.com>,
	<f.fainelli@gmail.com>, <devicetree@vger.kernel.org>
Subject: [PATCH v6 net-next 10/10] net: dsa: microchip: add support for vlan operations
Date: Fri, 29 Oct 2021 10:52:56 +0530	[thread overview]
Message-ID: <20211029052256.144739-11-prasanna.vengateshan@microchip.com> (raw)
In-Reply-To: <20211029052256.144739-1-prasanna.vengateshan@microchip.com>

Support for VLAN add, del, prepare and filtering operations.

The VLAN aware is a global setting. Mixed vlan filterings
are not supported. vlan_filtering_is_global is made as true
in lan937x_setup function.

Signed-off-by: Prasanna Vengateshan <prasanna.vengateshan@microchip.com>
---
 drivers/net/dsa/microchip/lan937x_main.c | 188 +++++++++++++++++++++++
 1 file changed, 188 insertions(+)

diff --git a/drivers/net/dsa/microchip/lan937x_main.c b/drivers/net/dsa/microchip/lan937x_main.c
index 980fd74b3bc1..3f1f86633173 100644
--- a/drivers/net/dsa/microchip/lan937x_main.c
+++ b/drivers/net/dsa/microchip/lan937x_main.c
@@ -17,6 +17,14 @@
 #include "ksz_common.h"
 #include "lan937x_dev.h"
 
+static int lan937x_wait_vlan_ctrl_ready(struct ksz_device *dev)
+{
+	unsigned int val;
+
+	return regmap_read_poll_timeout(dev->regmap[0], REG_SW_VLAN_CTRL, val,
+					!(val & VLAN_START), 10, 1000);
+}
+
 static u8 lan937x_get_fid(u16 vid)
 {
 	if (vid > ALU_FID_SIZE)
@@ -25,6 +33,97 @@ static u8 lan937x_get_fid(u16 vid)
 		return vid;
 }
 
+static int lan937x_get_vlan_table(struct ksz_device *dev, u16 vid,
+				  struct lan937x_vlan *vlan_entry)
+{
+	u32 data;
+	int ret;
+
+	mutex_lock(&dev->vlan_mutex);
+
+	ret = ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
+	if (ret < 0)
+		goto exit;
+
+	ret = ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_READ | VLAN_START);
+	if (ret < 0)
+		goto exit;
+
+	/* wait to be cleared */
+	ret = lan937x_wait_vlan_ctrl_ready(dev);
+	if (ret < 0)
+		goto exit;
+
+	ret = ksz_read32(dev, REG_SW_VLAN_ENTRY__4, &data);
+	if (ret < 0)
+		goto exit;
+
+	vlan_entry->valid = !!(data & VLAN_VALID);
+	vlan_entry->fid	= data & VLAN_FID_M;
+
+	ret = ksz_read32(dev, REG_SW_VLAN_ENTRY_UNTAG__4,
+			 &vlan_entry->untag_prtmap);
+	if (ret < 0)
+		goto exit;
+
+	ret = ksz_read32(dev, REG_SW_VLAN_ENTRY_PORTS__4,
+			 &vlan_entry->fwd_map);
+	if (ret < 0)
+		goto exit;
+
+	ret = ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
+	if (ret < 0)
+		goto exit;
+
+exit:
+	mutex_unlock(&dev->vlan_mutex);
+
+	return ret;
+}
+
+static int lan937x_set_vlan_table(struct ksz_device *dev, u16 vid,
+				  struct lan937x_vlan *vlan_entry)
+{
+	u32 data;
+	int ret;
+
+	mutex_lock(&dev->vlan_mutex);
+
+	data = vlan_entry->valid ? VLAN_VALID : 0;
+	data |= vlan_entry->fid;
+
+	ret = ksz_write32(dev, REG_SW_VLAN_ENTRY__4, data);
+	if (ret < 0)
+		goto exit;
+
+	ret = ksz_write32(dev, REG_SW_VLAN_ENTRY_UNTAG__4,
+			  vlan_entry->untag_prtmap);
+	if (ret < 0)
+		goto exit;
+
+	ret = ksz_write32(dev, REG_SW_VLAN_ENTRY_PORTS__4, vlan_entry->fwd_map);
+	if (ret < 0)
+		goto exit;
+
+	ret = ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
+	if (ret < 0)
+		goto exit;
+
+	ret = ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_START | VLAN_WRITE);
+	if (ret < 0)
+		goto exit;
+
+	/* wait to be cleared */
+	ret = lan937x_wait_vlan_ctrl_ready(dev);
+	if (ret < 0)
+		goto exit;
+
+exit:
+	mutex_unlock(&dev->vlan_mutex);
+
+	return ret;
+}
+
 static int lan937x_read_table(struct ksz_device *dev, u32 *table)
 {
 	int ret;
@@ -189,6 +288,92 @@ static void lan937x_port_stp_state_set(struct dsa_switch *ds, int port,
 		ksz_update_port_member(dev, port);
 }
 
+static int lan937x_port_vlan_filtering(struct dsa_switch *ds, int port,
+				       bool flag,
+				       struct netlink_ext_ack *extack)
+{
+	struct ksz_device *dev = ds->priv;
+
+	/* enable/disable VLAN mode, once enabled, look up process starts
+	 * and then forwarding and discarding are done based on port
+	 * membership of the VLAN table
+	 */
+	return lan937x_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, flag);
+}
+
+static int lan937x_port_vlan_add(struct dsa_switch *ds, int port,
+				 const struct switchdev_obj_port_vlan *vlan,
+				 struct netlink_ext_ack *extack)
+{
+	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+	struct ksz_device *dev = ds->priv;
+	struct lan937x_vlan vlan_entry;
+	int ret;
+
+	ret = lan937x_get_vlan_table(dev, vlan->vid, &vlan_entry);
+	if (ret < 0) {
+		NL_SET_ERR_MSG_MOD(extack, "Failed to get vlan table");
+		return ret;
+	}
+
+	vlan_entry.fid = lan937x_get_fid(vlan->vid);
+	vlan_entry.valid = true;
+
+	/* set/clear switch port when updating vlan table registers */
+	if (untagged)
+		vlan_entry.untag_prtmap |= BIT(port);
+	else
+		vlan_entry.untag_prtmap &= ~BIT(port);
+
+	vlan_entry.fwd_map |= BIT(port);
+
+	ret = lan937x_set_vlan_table(dev, vlan->vid, &vlan_entry);
+	if (ret < 0) {
+		NL_SET_ERR_MSG_MOD(extack, "Failed to set vlan table");
+		return ret;
+	}
+
+	/* change PVID */
+	if (vlan->flags & BRIDGE_VLAN_INFO_PVID) {
+		ret = lan937x_pwrite16(dev, port, REG_PORT_DEFAULT_VID,
+				       vlan->vid);
+		if (ret < 0) {
+			NL_SET_ERR_MSG_MOD(extack, "Failed to set pvid");
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int lan937x_port_vlan_del(struct dsa_switch *ds, int port,
+				 const struct switchdev_obj_port_vlan *vlan)
+{
+	struct ksz_device *dev = ds->priv;
+	struct lan937x_vlan vlan_entry;
+	u16 pvid;
+	int ret;
+
+	lan937x_pread16(dev, port, REG_PORT_DEFAULT_VID, &pvid);
+
+	ret = lan937x_get_vlan_table(dev, vlan->vid, &vlan_entry);
+	if (ret < 0) {
+		dev_err(dev->dev, "Failed to get vlan table\n");
+		return ret;
+	}
+	/* clear port fwd map & untag entries*/
+	vlan_entry.fwd_map &= ~BIT(port);
+	vlan_entry.untag_prtmap &= ~BIT(port);
+
+	ret = lan937x_set_vlan_table(dev, vlan->vid, &vlan_entry);
+	if (ret < 0) {
+		dev_err(dev->dev, "Failed to set vlan table\n");
+		return ret;
+	}
+
+	return 0;
+}
+
 static int lan937x_port_fdb_add(struct dsa_switch *ds, int port,
 				const unsigned char *addr, u16 vid)
 {
@@ -1036,6 +1221,9 @@ const struct dsa_switch_ops lan937x_switch_ops = {
 	.port_bridge_leave = ksz_port_bridge_leave,
 	.port_stp_state_set = lan937x_port_stp_state_set,
 	.port_fast_age = ksz_port_fast_age,
+	.port_vlan_filtering = lan937x_port_vlan_filtering,
+	.port_vlan_add = lan937x_port_vlan_add,
+	.port_vlan_del = lan937x_port_vlan_del,
 	.port_fdb_dump = lan937x_port_fdb_dump,
 	.port_fdb_add = lan937x_port_fdb_add,
 	.port_fdb_del = lan937x_port_fdb_del,
-- 
2.27.0


  parent reply	other threads:[~2021-10-29  5:24 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-29  5:22 [PATCH v6 net-next 00/10] net: dsa: microchip: DSA driver support for LAN937x switch Prasanna Vengateshan
2021-10-29  5:22 ` [PATCH v6 net-next 01/10] dt-bindings: net: dsa: dt bindings for microchip lan937x Prasanna Vengateshan
2021-10-29 11:24   ` Vladimir Oltean
2021-10-29  5:22 ` [PATCH v6 net-next 02/10] net: dsa: move mib->cnt_ptr reset code to ksz_common.c Prasanna Vengateshan
2021-10-29  5:22 ` [PATCH v6 net-next 03/10] net: phy: Add support for LAN937x T1 phy driver Prasanna Vengateshan
2021-10-29  5:22 ` [PATCH v6 net-next 04/10] net: dsa: tag_ksz: add tag handling for Microchip LAN937x Prasanna Vengateshan
2021-10-29  5:22 ` [PATCH v6 net-next 05/10] net: dsa: microchip: add DSA support for microchip lan937x Prasanna Vengateshan
2021-10-29  5:22 ` [PATCH v6 net-next 06/10] net: dsa: microchip: add support for phylink management Prasanna Vengateshan
2021-10-29  8:21   ` Russell King (Oracle)
2021-10-29  5:22 ` [PATCH v6 net-next 07/10] net: dsa: microchip: add support for ethtool port counters Prasanna Vengateshan
2021-10-29 13:54   ` Jakub Kicinski
2021-10-29  5:22 ` [PATCH v6 net-next 08/10] net: dsa: microchip: add support for port mirror operations Prasanna Vengateshan
2021-10-29  5:22 ` [PATCH v6 net-next 09/10] net: dsa: microchip: add support for fdb and mdb management Prasanna Vengateshan
2021-10-29  5:22 ` Prasanna Vengateshan [this message]
2021-10-29 11:26   ` [PATCH v6 net-next 10/10] net: dsa: microchip: add support for vlan operations Vladimir Oltean

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211029052256.144739-11-prasanna.vengateshan@microchip.com \
    --to=prasanna.vengateshan@microchip.com \
    --cc=UNGLinuxDriver@microchip.com \
    --cc=Woojung.Huh@microchip.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.