* [PATCH v2 1/3] arm64: dts: rockchip: px30: Move dmc into -u-boot.dtsi
@ 2021-11-15 17:38 Jagan Teki
2021-11-15 17:38 ` [PATCH v2 2/3] arm64: dts: rockchip: Sync px30 from linux-next Jagan Teki
` (3 more replies)
0 siblings, 4 replies; 8+ messages in thread
From: Jagan Teki @ 2021-11-15 17:38 UTC (permalink / raw)
To: Kever Yang; +Cc: u-boot, linux-amarula, Jagan Teki
dmc node is specific to U-Boot, it is always better practice
to maintain U-Boot specific nodes into -u-boot.dtsi files
in order to maintain Linux dts file sync compatibility.
Move the dmc into px30-u-boot.dtsi, also add dmc node
explicitly in rk3326-odroid-go2-u-boot.dtsi since it is
using px30.dts.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- none
arch/arm/dts/px30-u-boot.dtsi | 10 ++++++----
arch/arm/dts/px30.dtsi | 5 -----
arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi | 10 ++++++----
3 files changed, 12 insertions(+), 13 deletions(-)
diff --git a/arch/arm/dts/px30-u-boot.dtsi b/arch/arm/dts/px30-u-boot.dtsi
index 029c8fbd8d..bbed7dcde5 100644
--- a/arch/arm/dts/px30-u-boot.dtsi
+++ b/arch/arm/dts/px30-u-boot.dtsi
@@ -13,6 +13,12 @@
u-boot,spl-boot-order = &emmc, &sdmmc;
};
+ dmc {
+ u-boot,dm-pre-reloc;
+ compatible = "rockchip,px30-dmc", "syscon";
+ reg = <0x0 0xff2a0000 0x0 0x1000>;
+ };
+
rng: rng@ff0b0000 {
compatible = "rockchip,cryptov2-rng";
reg = <0x0 0xff0b0000 0x0 0x4000>;
@@ -20,10 +26,6 @@
};
};
-&dmc {
- u-boot,dm-pre-reloc;
-};
-
&uart2 {
clock-frequency = <24000000>;
u-boot,dm-pre-reloc;
diff --git a/arch/arm/dts/px30.dtsi b/arch/arm/dts/px30.dtsi
index ef706486dc..ef77b7b997 100644
--- a/arch/arm/dts/px30.dtsi
+++ b/arch/arm/dts/px30.dtsi
@@ -151,11 +151,6 @@
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
};
- dmc: dmc {
- compatible = "rockchip,px30-dmc", "syscon";
- reg = <0x0 0xff2a0000 0x0 0x1000>;
- };
-
display_subsystem: display-subsystem {
compatible = "rockchip,display-subsystem";
ports = <&vopb_out>, <&vopl_out>;
diff --git a/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
index bffaa3edf3..63d87e16e1 100644
--- a/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
+++ b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
@@ -16,6 +16,12 @@
serial2 = &uart2;
spi0 = &sfc;
};
+
+ dmc {
+ u-boot,dm-pre-reloc;
+ compatible = "rockchip,px30-dmc", "syscon";
+ reg = <0x0 0xff2a0000 0x0 0x1000>;
+ };
};
/* U-Boot clk driver for px30 cannot set GPU_CLK */
@@ -32,10 +38,6 @@
<100000000>, <17000000>;
};
-&dmc {
- u-boot,dm-pre-reloc;
-};
-
&gpio0 {
u-boot,dm-pre-reloc;
};
--
2.25.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2 2/3] arm64: dts: rockchip: Sync px30 from linux-next
2021-11-15 17:38 [PATCH v2 1/3] arm64: dts: rockchip: px30: Move dmc into -u-boot.dtsi Jagan Teki
@ 2021-11-15 17:38 ` Jagan Teki
2021-12-24 6:55 ` Kever Yang
2021-11-15 17:38 ` [PATCH v2 3/3] engicam: px30: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF Jagan Teki
` (2 subsequent siblings)
3 siblings, 1 reply; 8+ messages in thread
From: Jagan Teki @ 2021-11-15 17:38 UTC (permalink / raw)
To: Kever Yang; +Cc: u-boot, linux-amarula, Jagan Teki
Sync the px30 devicetree files from linux-next tree.
commit <14ce8069f48b> ("lib/stackdepot: allow optional init and
stack_table allocation by kvmalloc() - fixup3")
Note, this path even sync rk3326 files as it depends on px30.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- add sync on v5.15
- add sync on rk3326
arch/arm/dts/Makefile | 4 +-
arch/arm/dts/px30-engicam-common.dtsi | 90 ++++++
arch/arm/dts/px30-engicam-ctouch2.dtsi | 22 ++
arch/arm/dts/px30-engicam-edimm2.2.dtsi | 59 ++++
.../px30-engicam-px30-core-ctouch2-of10.dts | 77 +++++
...dts => px30-engicam-px30-core-ctouch2.dts} | 4 +-
.../dts/px30-engicam-px30-core-edimm2.2.dts | 43 +++
...-core.dtsi => px30-engicam-px30-core.dtsi} | 11 +-
arch/arm/dts/px30-evb.dts | 143 ++++++++--
arch/arm/dts/px30-px30-core-edimm2.2.dts | 21 --
arch/arm/dts/px30-u-boot.dtsi | 4 +
arch/arm/dts/px30.dtsi | 270 +++++++++++++-----
arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi | 2 +-
arch/arm/dts/rk3326-odroid-go2.dts | 178 +++---------
configs/px30-core-ctouch2-px30_defconfig | 4 +-
configs/px30-core-edimm2.2-px30_defconfig | 4 +-
16 files changed, 681 insertions(+), 255 deletions(-)
create mode 100644 arch/arm/dts/px30-engicam-px30-core-ctouch2-of10.dts
rename arch/arm/dts/{px30-px30-core-ctouch2.dts => px30-engicam-px30-core-ctouch2.dts} (80%)
create mode 100644 arch/arm/dts/px30-engicam-px30-core-edimm2.2.dts
rename arch/arm/dts/{px30-px30-core.dtsi => px30-engicam-px30-core.dtsi} (96%)
delete mode 100644 arch/arm/dts/px30-px30-core-edimm2.2.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index cc34da7bd8..57a33d0bc4 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -78,8 +78,8 @@ dtb-$(CONFIG_MACH_S700) += \
dtb-$(CONFIG_ROCKCHIP_PX30) += \
px30-evb.dtb \
px30-firefly.dtb \
- px30-px30-core-ctouch2.dtb \
- px30-px30-core-edimm2.2.dtb \
+ px30-engicam-px30-core-ctouch2.dtb \
+ px30-engicam-px30-core-edimm2.2.dtb \
rk3326-odroid-go2.dtb
dtb-$(CONFIG_ROCKCHIP_RK3036) += \
diff --git a/arch/arm/dts/px30-engicam-common.dtsi b/arch/arm/dts/px30-engicam-common.dtsi
index bd5bde989e..3429e124d9 100644
--- a/arch/arm/dts/px30-engicam-common.dtsi
+++ b/arch/arm/dts/px30-engicam-common.dtsi
@@ -6,6 +6,11 @@
*/
/ {
+ aliases {
+ mmc1 = &sdmmc;
+ mmc2 = &sdio;
+ };
+
vcc5v0_sys: vcc5v0-sys {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys"; /* +5V */
@@ -14,6 +19,63 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&xin32k>;
+ clock-names = "ext_clock";
+ post-power-on-delay-ms = <80>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+ };
+
+ vcc3v3_btreg: vcc3v3-btreg {
+ compatible = "regulator-gpio";
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_enable_h>;
+ regulator-name = "btreg-gpio-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ states = <3300000 0x0>;
+ };
+
+ vcc3v3_rf_aux_mod: vcc3v3-rf-aux-mod {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_rf_aux_mod";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ xin32k: xin32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "xin32k";
+ };
+};
+
+&sdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus-width = <4>;
+ clock-frequency = <50000000>;
+ cap-sdio-irq;
+ cap-sd-highspeed;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ sd-uhs-sdr104;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+ };
};
&gmac {
@@ -25,6 +87,10 @@
status = "okay";
};
+&pwm0 {
+ status = "okay";
+};
+
&sdmmc {
cap-sd-highspeed;
card-detect-delay = <800>;
@@ -33,7 +99,31 @@
status = "okay";
};
+&u2phy {
+ status = "okay";
+
+ u2phy_host: host-port {
+ status = "okay";
+ };
+
+ u2phy_otg: otg-port {
+ status = "okay";
+ };
+};
+
&uart2 {
pinctrl-0 = <&uart2m1_xfer>;
status = "okay";
};
+
+&usb20_otg {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
diff --git a/arch/arm/dts/px30-engicam-ctouch2.dtsi b/arch/arm/dts/px30-engicam-ctouch2.dtsi
index 58425b1e55..bf10a3d29f 100644
--- a/arch/arm/dts/px30-engicam-ctouch2.dtsi
+++ b/arch/arm/dts/px30-engicam-ctouch2.dtsi
@@ -6,3 +6,25 @@
*/
#include "px30-engicam-common.dtsi"
+
+&pinctrl {
+ bt {
+ bt_enable_h: bt-enable-h {
+ rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&sdio_pwrseq {
+ reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+};
+
+&vcc3v3_btreg {
+ enable-gpio = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm/dts/px30-engicam-edimm2.2.dtsi b/arch/arm/dts/px30-engicam-edimm2.2.dtsi
index cb00988953..449b8eb645 100644
--- a/arch/arm/dts/px30-engicam-edimm2.2.dtsi
+++ b/arch/arm/dts/px30-engicam-edimm2.2.dtsi
@@ -5,3 +5,62 @@
*/
#include "px30-engicam-common.dtsi"
+
+/ {
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm0 0 25000 0>;
+ };
+
+ panel {
+ compatible = "yes-optoelectronics,ytc700tlag-05-201c";
+ backlight = <&backlight>;
+ data-mapping = "vesa-24";
+ power-supply = <&vcc3v3_lcd>;
+
+ port {
+ panel_in_lvds: endpoint {
+ remote-endpoint = <&lvds_out_panel>;
+ };
+ };
+ };
+};
+
+&display_subsystem {
+ status = "okay";
+};
+
+&dsi_dphy {
+ status = "okay";
+};
+
+/* LVDS_B(secondary) */
+&lvds {
+ status = "okay";
+
+ ports {
+ port@1 {
+ reg = <1>;
+
+ lvds_out_panel: endpoint {
+ remote-endpoint = <&panel_in_lvds>;
+ };
+ };
+ };
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
diff --git a/arch/arm/dts/px30-engicam-px30-core-ctouch2-of10.dts b/arch/arm/dts/px30-engicam-px30-core-ctouch2-of10.dts
new file mode 100644
index 0000000000..47aa30505a
--- /dev/null
+++ b/arch/arm/dts/px30-engicam-px30-core-ctouch2-of10.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "px30.dtsi"
+#include "px30-engicam-ctouch2.dtsi"
+#include "px30-engicam-px30-core.dtsi"
+
+/ {
+ model = "Engicam PX30.Core C.TOUCH 2.0 10.1\" Open Frame";
+ compatible = "engicam,px30-core-ctouch2-of10", "engicam,px30-core",
+ "rockchip,px30";
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm0 0 25000 0>;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ panel {
+ compatible = "ampire,am-1280800n3tzqw-t00h";
+ backlight = <&backlight>;
+ power-supply = <&vcc3v3_lcd>;
+ data-mapping = "vesa-24";
+
+ port {
+ panel_in_lvds: endpoint {
+ remote-endpoint = <&lvds_out_panel>;
+ };
+ };
+ };
+};
+
+&display_subsystem {
+ status = "okay";
+};
+
+&dsi_dphy {
+ status = "okay";
+};
+
+&lvds {
+ status = "okay";
+
+ ports {
+ port@1 {
+ reg = <1>;
+
+ lvds_out_panel: endpoint {
+ remote-endpoint = <&panel_in_lvds>;
+ };
+ };
+ };
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
diff --git a/arch/arm/dts/px30-px30-core-ctouch2.dts b/arch/arm/dts/px30-engicam-px30-core-ctouch2.dts
similarity index 80%
rename from arch/arm/dts/px30-px30-core-ctouch2.dts
rename to arch/arm/dts/px30-engicam-px30-core-ctouch2.dts
index 2da0128188..5a0ecb8fae 100644
--- a/arch/arm/dts/px30-px30-core-ctouch2.dts
+++ b/arch/arm/dts/px30-engicam-px30-core-ctouch2.dts
@@ -9,11 +9,11 @@
/dts-v1/;
#include "px30.dtsi"
#include "px30-engicam-ctouch2.dtsi"
-#include "px30-px30-core.dtsi"
+#include "px30-engicam-px30-core.dtsi"
/ {
model = "Engicam PX30.Core C.TOUCH 2.0";
- compatible = "engicam,px30-core-ctouch2", "engicam,px30-px30-core",
+ compatible = "engicam,px30-core-ctouch2", "engicam,px30-core",
"rockchip,px30";
chosen {
diff --git a/arch/arm/dts/px30-engicam-px30-core-edimm2.2.dts b/arch/arm/dts/px30-engicam-px30-core-edimm2.2.dts
new file mode 100644
index 0000000000..d759478e1c
--- /dev/null
+++ b/arch/arm/dts/px30-engicam-px30-core-edimm2.2.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "px30.dtsi"
+#include "px30-engicam-edimm2.2.dtsi"
+#include "px30-engicam-px30-core.dtsi"
+
+/ {
+ model = "Engicam PX30.Core EDIMM2.2 Starter Kit";
+ compatible = "engicam,px30-core-edimm2.2", "engicam,px30-core",
+ "rockchip,px30";
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+};
+
+&pinctrl {
+ bt {
+ bt_enable_h: bt-enable-h {
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&sdio_pwrseq {
+ reset-gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_LOW>;
+};
+
+&vcc3v3_btreg {
+ enable-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm/dts/px30-px30-core.dtsi b/arch/arm/dts/px30-engicam-px30-core.dtsi
similarity index 96%
rename from arch/arm/dts/px30-px30-core.dtsi
rename to arch/arm/dts/px30-engicam-px30-core.dtsi
index 16e6cf28a4..7249871530 100644
--- a/arch/arm/dts/px30-px30-core.dtsi
+++ b/arch/arm/dts/px30-engicam-px30-core.dtsi
@@ -10,7 +10,11 @@
#include <dt-bindings/pinctrl/rockchip.h>
/ {
- compatible = "engicam,px30-px30-core", "rockchip,px30";
+ compatible = "engicam,px30-core", "rockchip,px30";
+
+ aliases {
+ mmc0 = &emmc;
+ };
};
&cpu0 {
@@ -192,6 +196,11 @@
};
};
+ vcc3v3_lcd: SWITCH_REG1 {
+ regulator-boot-on;
+ regulator-name = "vcc3v3_lcd";
+ };
+
vcc5v0_host: SWITCH_REG2 {
regulator-name = "vcc5v0_host";
regulator-always-on;
diff --git a/arch/arm/dts/px30-evb.dts b/arch/arm/dts/px30-evb.dts
index 4134e2ee13..848bc39cf8 100644
--- a/arch/arm/dts/px30-evb.dts
+++ b/arch/arm/dts/px30-evb.dts
@@ -13,8 +13,14 @@
model = "Rockchip PX30 EVB";
compatible = "rockchip,px30-evb", "rockchip,px30";
+ aliases {
+ mmc0 = &sdmmc;
+ mmc1 = &sdio;
+ mmc2 = &emmc;
+ };
+
chosen {
- stdout-path = "serial2:115200n8";
+ stdout-path = "serial5:115200n8";
};
adc-keys {
@@ -108,6 +114,10 @@
cpu-supply = <&vdd_arm>;
};
+&csi_dphy {
+ status = "okay";
+};
+
&display_subsystem {
status = "okay";
};
@@ -126,22 +136,15 @@
};
panel@0 {
- compatible = "sitronix,st7703";
+ compatible = "xinpeng,xpp055c272";
reg = <0>;
backlight = <&backlight>;
iovcc-supply = <&vcc_1v8>;
vci-supply = <&vcc3v3_lcd>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- mipi_in_panel: endpoint {
- remote-endpoint = <&mipi_out_panel>;
- };
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
};
};
};
@@ -152,7 +155,6 @@
};
&emmc {
- bus-width = <8>;
cap-mmc-highspeed;
mmc-hs200-1_8v;
non-removable;
@@ -171,6 +173,11 @@
status = "okay";
};
+&gpu {
+ mali-supply = <&vdd_log>;
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
@@ -388,6 +395,73 @@
};
};
+&i2c1 {
+ status = "okay";
+
+ sensor@d {
+ compatible = "asahi-kasei,ak8963";
+ reg = <0x0d>;
+ gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+ vdd-supply = <&vcc3v0_pmu>;
+ mount-matrix = "1", /* x0 */
+ "0", /* y0 */
+ "0", /* z0 */
+ "0", /* x1 */
+ "1", /* y1 */
+ "0", /* z1 */
+ "0", /* x2 */
+ "0", /* y2 */
+ "1"; /* z2 */
+ };
+
+ touchscreen@14 {
+ compatible = "goodix,gt1151";
+ reg = <0x14>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
+ irq-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+ VDDIO-supply = <&vcc3v3_lcd>;
+ };
+
+ sensor@4c {
+ compatible = "fsl,mma7660";
+ reg = <0x4c>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB7 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ clock-frequency = <100000>;
+
+ /* These are relatively safe rise/fall times; TODO: measure */
+ i2c-scl-falling-time-ns = <50>;
+ i2c-scl-rising-time-ns = <300>;
+
+ ov5695: ov5695@36 {
+ compatible = "ovti,ov5695";
+ reg = <0x36>;
+ avdd-supply = <&vcc2v8_dvp>;
+ clocks = <&cru SCLK_CIF_OUT>;
+ clock-names = "xvclk";
+ dvdd-supply = <&vcc1v5_dvp>;
+ dovdd-supply = <&vcc1v8_dvp>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cif_clkout_m0>;
+ reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+
+ port {
+ ucam_out: endpoint {
+ remote-endpoint = <&mipi_in_ucam>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+};
+
&i2s1_2ch {
status = "okay";
};
@@ -403,6 +477,24 @@
vccio6-supply = <&vccio_flash>;
};
+&isp {
+ status = "okay";
+
+ ports {
+ port@0 {
+ mipi_in_ucam: endpoint@0 {
+ reg = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&ucam_out>;
+ };
+ };
+ };
+};
+
+&isp_mmu {
+ status = "okay";
+};
+
&pinctrl {
headphone {
hp_det: hp-det {
@@ -464,7 +556,6 @@
};
&sdmmc {
- bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
card-detect-delay = <800>;
@@ -474,10 +565,10 @@
sd-uhs-sdr104;
vmmc-supply = <&vcc_sd>;
vqmmc-supply = <&vccio_sd>;
+ status = "okay";
};
&sdio {
- bus-width = <4>;
cap-sd-highspeed;
keep-power-in-suspend;
non-removable;
@@ -486,13 +577,27 @@
status = "okay";
};
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_xfer &uart1_cts>;
+&tsadc {
+ rockchip,hw-tshut-mode = <1>;
+ rockchip,hw-tshut-polarity = <1>;
status = "okay";
};
-&uart2 {
+&u2phy {
+ status = "okay";
+
+ u2phy_host: host-port {
+ status = "okay";
+ };
+
+ u2phy_otg: otg-port {
+ status = "okay";
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_xfer &uart1_cts>;
status = "okay";
};
diff --git a/arch/arm/dts/px30-px30-core-edimm2.2.dts b/arch/arm/dts/px30-px30-core-edimm2.2.dts
deleted file mode 100644
index c36280ce7f..0000000000
--- a/arch/arm/dts/px30-px30-core-edimm2.2.dts
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
- * Copyright (c) 2020 Engicam srl
- * Copyright (c) 2020 Amarula Solutions(India)
- */
-
-/dts-v1/;
-#include "px30.dtsi"
-#include "px30-engicam-edimm2.2.dtsi"
-#include "px30-px30-core.dtsi"
-
-/ {
- model = "Engicam PX30.Core EDIMM2.2 Starter Kit";
- compatible = "engicam,px30-core-edimm2.2", "engicam,px30-px30-core",
- "rockchip,px30";
-
- chosen {
- stdout-path = "serial2:115200n8";
- };
-};
diff --git a/arch/arm/dts/px30-u-boot.dtsi b/arch/arm/dts/px30-u-boot.dtsi
index bbed7dcde5..f102b2aef4 100644
--- a/arch/arm/dts/px30-u-boot.dtsi
+++ b/arch/arm/dts/px30-u-boot.dtsi
@@ -64,10 +64,14 @@
&cru {
u-boot,dm-pre-reloc;
+ /delete-property/ assigned-clocks;
+ /delete-property/ assigned-clock-rates;
};
&pmucru {
u-boot,dm-pre-reloc;
+ /delete-property/ assigned-clocks;
+ /delete-property/ assigned-clock-rates;
};
&saradc {
diff --git a/arch/arm/dts/px30.dtsi b/arch/arm/dts/px30.dtsi
index ef77b7b997..00f50b05d5 100644
--- a/arch/arm/dts/px30.dtsi
+++ b/arch/arm/dts/px30.dtsi
@@ -110,7 +110,7 @@
};
};
- cpu0_opp_table: cpu0-opp-table {
+ cpu0_opp_table: opp-table-0 {
compatible = "operating-points-v2";
opp-shared;
@@ -143,7 +143,7 @@
};
arm-pmu {
- compatible = "arm,cortex-a53-pmu";
+ compatible = "arm,cortex-a35-pmu";
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
@@ -244,28 +244,31 @@
#size-cells = <0>;
/* These power domains are grouped by VD_LOGIC */
- pd_usb@PX30_PD_USB {
+ power-domain@PX30_PD_USB {
reg = <PX30_PD_USB>;
clocks = <&cru HCLK_HOST>,
<&cru HCLK_OTG>,
<&cru SCLK_OTG_ADP>;
pm_qos = <&qos_usb_host>, <&qos_usb_otg>;
+ #power-domain-cells = <0>;
};
- pd_sdcard@PX30_PD_SDCARD {
+ power-domain@PX30_PD_SDCARD {
reg = <PX30_PD_SDCARD>;
clocks = <&cru HCLK_SDMMC>,
<&cru SCLK_SDMMC>;
pm_qos = <&qos_sdmmc>;
+ #power-domain-cells = <0>;
};
- pd_gmac@PX30_PD_GMAC {
+ power-domain@PX30_PD_GMAC {
reg = <PX30_PD_GMAC>;
clocks = <&cru ACLK_GMAC>,
<&cru PCLK_GMAC>,
<&cru SCLK_MAC_REF>,
<&cru SCLK_GMAC_RX_TX>;
pm_qos = <&qos_gmac>;
+ #power-domain-cells = <0>;
};
- pd_mmc_nand@PX30_PD_MMC_NAND {
+ power-domain@PX30_PD_MMC_NAND {
reg = <PX30_PD_MMC_NAND>;
clocks = <&cru HCLK_NANDC>,
<&cru HCLK_EMMC>,
@@ -277,15 +280,17 @@
<&cru SCLK_SFC>;
pm_qos = <&qos_emmc>, <&qos_nand>,
<&qos_sdio>, <&qos_sfc>;
+ #power-domain-cells = <0>;
};
- pd_vpu@PX30_PD_VPU {
+ power-domain@PX30_PD_VPU {
reg = <PX30_PD_VPU>;
clocks = <&cru ACLK_VPU>,
<&cru HCLK_VPU>,
<&cru SCLK_CORE_VPU>;
pm_qos = <&qos_vpu>, <&qos_vpu_r128>;
+ #power-domain-cells = <0>;
};
- pd_vo@PX30_PD_VO {
+ power-domain@PX30_PD_VO {
reg = <PX30_PD_VO>;
clocks = <&cru ACLK_RGA>,
<&cru ACLK_VOPB>,
@@ -300,8 +305,9 @@
<&cru SCLK_VOPB_PWM>;
pm_qos = <&qos_rga_rd>, <&qos_rga_wr>,
<&qos_vop_m0>, <&qos_vop_m1>;
+ #power-domain-cells = <0>;
};
- pd_vi@PX30_PD_VI {
+ power-domain@PX30_PD_VI {
reg = <PX30_PD_VI>;
clocks = <&cru ACLK_CIF>,
<&cru ACLK_ISP>,
@@ -311,11 +317,13 @@
pm_qos = <&qos_isp_128>, <&qos_isp_rd>,
<&qos_isp_wr>, <&qos_isp_m1>,
<&qos_vip>;
+ #power-domain-cells = <0>;
};
- pd_gpu@PX30_PD_GPU {
+ power-domain@PX30_PD_GPU {
reg = <PX30_PD_GPU>;
clocks = <&cru SCLK_GPU>;
pm_qos = <&qos_gpu>;
+ #power-domain-cells = <0>;
};
};
};
@@ -600,7 +608,7 @@
};
wdt: watchdog@ff1e0000 {
- compatible = "snps,dw-wdt";
+ compatible = "rockchip,px30-wdt", "snps,dw-wdt";
reg = <0x0 0xff1e0000 0x0 0x100>;
clocks = <&cru PCLK_WDT_NS>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
@@ -703,21 +711,15 @@
clock-names = "pclk", "timer";
};
- amba {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- dmac: dmac@ff240000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0xff240000 0x0 0x4000>;
- interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru ACLK_DMAC>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- };
+ dmac: dmac@ff240000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xff240000 0x0 0x4000>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ arm,pl330-periph-burst;
+ clocks = <&cru ACLK_DMAC>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
};
tsadc: tsadc@ff280000 {
@@ -733,9 +735,9 @@
rockchip,grf = <&grf>;
rockchip,hw-tshut-temp = <120000>;
pinctrl-names = "init", "default", "sleep";
- pinctrl-0 = <&tsadc_otp_gpio>;
+ pinctrl-0 = <&tsadc_otp_pin>;
pinctrl-1 = <&tsadc_otp_out>;
- pinctrl-2 = <&tsadc_otp_gpio>;
+ pinctrl-2 = <&tsadc_otp_pin>;
#thermal-sensor-cells = <1>;
status = "disabled";
};
@@ -784,6 +786,16 @@
rockchip,grf = <&grf>;
#clock-cells = <1>;
#reset-cells = <1>;
+
+ assigned-clocks = <&cru PLL_NPLL>,
+ <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+ <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
+ <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>;
+
+ assigned-clock-rates = <1188000000>,
+ <200000000>, <200000000>,
+ <150000000>, <150000000>,
+ <100000000>, <200000000>;
};
pmucru: clock-controller@ff2bc000 {
@@ -794,6 +806,13 @@
rockchip,grf = <&grf>;
#clock-cells = <1>;
#reset-cells = <1>;
+
+ assigned-clocks =
+ <&pmucru PLL_GPLL>, <&pmucru PCLK_PMU_PRE>,
+ <&pmucru SCLK_WIFI_PMU>;
+ assigned-clock-rates =
+ <1200000000>, <100000000>,
+ <26000000>;
};
usb2phy_grf: syscon@ff2c0000 {
@@ -803,7 +822,7 @@
#address-cells = <1>;
#size-cells = <1>;
- u2phy: usb2-phy@100 {
+ u2phy: usb2phy@100 {
compatible = "rockchip,px30-usb2phy";
reg = <0x100 0x20>;
clocks = <&pmucru SCLK_USBPHY_REF>;
@@ -845,6 +864,19 @@
status = "disabled";
};
+ csi_dphy: phy@ff2f0000 {
+ compatible = "rockchip,px30-csi-dphy";
+ reg = <0x0 0xff2f0000 0x0 0x4000>;
+ clocks = <&cru PCLK_MIPICSIPHY>;
+ clock-names = "pclk";
+ #phy-cells = <0>;
+ power-domains = <&power PX30_PD_VI>;
+ resets = <&cru SRST_MIPICSIPHY_P>;
+ reset-names = "apb";
+ rockchip,grf = <&grf>;
+ status = "disabled";
+ };
+
usb20_otg: usb@ff300000 {
compatible = "rockchip,px30-usb", "rockchip,rk3066-usb",
"snps,dwc2";
@@ -856,7 +888,6 @@
g-np-tx-fifo-size = <16>;
g-rx-fifo-size = <280>;
g-tx-fifo-size = <256 128 128 64 32 16>;
- g-use-dma;
phys = <&u2phy_otg>;
phy-names = "usb2-phy";
power-domains = <&power PX30_PD_USB>;
@@ -868,7 +899,6 @@
reg = <0x0 0xff340000 0x0 0x10000>;
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST>;
- clock-names = "usbhost";
phys = <&u2phy_host>;
phy-names = "usb";
power-domains = <&power PX30_PD_USB>;
@@ -880,7 +910,6 @@
reg = <0x0 0xff350000 0x0 0x10000>;
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST>;
- clock-names = "usbhost";
phys = <&u2phy_host>;
phy-names = "usb";
power-domains = <&power PX30_PD_USB>;
@@ -910,13 +939,14 @@
status = "disabled";
};
- sdmmc: dwmmc@ff370000 {
+ sdmmc: mmc@ff370000 {
compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xff370000 0x0 0x4000>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
<&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
- clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ bus-width = <4>;
fifo-depth = <0x100>;
max-frequency = <150000000>;
pinctrl-names = "default";
@@ -925,13 +955,14 @@
status = "disabled";
};
- sdio: dwmmc@ff380000 {
+ sdio: mmc@ff380000 {
compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xff380000 0x0 0x4000>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
<&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
- clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ bus-width = <4>;
fifo-depth = <0x100>;
max-frequency = <150000000>;
pinctrl-names = "default";
@@ -940,13 +971,14 @@
status = "disabled";
};
- emmc: dwmmc@ff390000 {
+ emmc: mmc@ff390000 {
compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xff390000 0x0 0x4000>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
- clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ bus-width = <8>;
fifo-depth = <0x100>;
max-frequency = <150000000>;
pinctrl-names = "default";
@@ -955,18 +987,54 @@
status = "disabled";
};
- sfc: sfc@ff3a0000 {
+ sfc: spi@ff3a0000 {
compatible = "rockchip,sfc";
reg = <0x0 0xff3a0000 0x0 0x4000>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
clock-names = "clk_sfc", "hclk_sfc";
- pinctrl-names = "default";
pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus4>;
+ pinctrl-names = "default";
+ power-domains = <&power PX30_PD_MMC_NAND>;
+ status = "disabled";
+ };
+
+ nfc: nand-controller@ff3b0000 {
+ compatible = "rockchip,px30-nfc";
+ reg = <0x0 0xff3b0000 0x0 0x4000>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>;
+ clock-names = "ahb", "nfc";
+ assigned-clocks = <&cru SCLK_NANDC>;
+ assigned-clock-rates = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_cs0
+ &flash_rdn &flash_rdy &flash_wrn &flash_dqs>;
power-domains = <&power PX30_PD_MMC_NAND>;
status = "disabled";
};
+ gpu_opp_table: opp-table-1 {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <950000>;
+ };
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <975000>;
+ };
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <1050000>;
+ };
+ opp-480000000 {
+ opp-hz = /bits/ 64 <480000000>;
+ opp-microvolt = <1125000>;
+ };
+ };
+
gpu: gpu@ff400000 {
compatible = "rockchip,px30-mali", "arm,mali-bifrost";
reg = <0x0 0xff400000 0x0 0x4000>;
@@ -977,9 +1045,32 @@
clocks = <&cru SCLK_GPU>;
#cooling-cells = <2>;
power-domains = <&power PX30_PD_GPU>;
+ operating-points-v2 = <&gpu_opp_table>;
status = "disabled";
};
+ vpu: video-codec@ff442000 {
+ compatible = "rockchip,px30-vpu";
+ reg = <0x0 0xff442000 0x0 0x800>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "vepu", "vdpu";
+ clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+ clock-names = "aclk", "hclk";
+ iommus = <&vpu_mmu>;
+ power-domains = <&power PX30_PD_VPU>;
+ };
+
+ vpu_mmu: iommu@ff442800 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff442800 0x0 0x100>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+ clock-names = "aclk", "iface";
+ #iommu-cells = <0>;
+ power-domains = <&power PX30_PD_VPU>;
+ };
+
dsi: dsi@ff450000 {
compatible = "rockchip,px30-mipi-dsi";
reg = <0x0 0xff450000 0x0 0x10000>;
@@ -1029,7 +1120,6 @@
reset-names = "axi", "ahb", "dclk";
iommus = <&vopb_mmu>;
power-domains = <&power PX30_PD_VO>;
- rockchip,grf = <&grf>;
status = "disabled";
vopb_out: port {
@@ -1052,7 +1142,6 @@
compatible = "rockchip,iommu";
reg = <0x0 0xff460f00 0x0 0x100>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "vopb_mmu";
clocks = <&cru ACLK_VOPB>, <&cru HCLK_VOPB>;
clock-names = "aclk", "iface";
power-domains = <&power PX30_PD_VO>;
@@ -1071,7 +1160,6 @@
reset-names = "axi", "ahb", "dclk";
iommus = <&vopl_mmu>;
power-domains = <&power PX30_PD_VO>;
- rockchip,grf = <&grf>;
status = "disabled";
vopl_out: port {
@@ -1093,8 +1181,7 @@
vopl_mmu: iommu@ff470f00 {
compatible = "rockchip,iommu";
reg = <0x0 0xff470f00 0x0 0x100>;
- interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "vopl_mmu";
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_VOPL>, <&cru HCLK_VOPL>;
clock-names = "aclk", "iface";
power-domains = <&power PX30_PD_VO>;
@@ -1102,103 +1189,144 @@
status = "disabled";
};
+ isp: isp@ff4a0000 {
+ compatible = "rockchip,px30-cif-isp"; /*rk3326-rkisp1*/
+ reg = <0x0 0xff4a0000 0x0 0x8000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "isp", "mi", "mipi";
+ clocks = <&cru SCLK_ISP>,
+ <&cru ACLK_ISP>,
+ <&cru HCLK_ISP>,
+ <&cru PCLK_ISP>;
+ clock-names = "isp", "aclk", "hclk", "pclk";
+ iommus = <&isp_mmu>;
+ phys = <&csi_dphy>;
+ phy-names = "dphy";
+ power-domains = <&power PX30_PD_VI>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+
+ isp_mmu: iommu@ff4a8000 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff4a8000 0x0 0x100>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_ISP>, <&cru HCLK_ISP>;
+ clock-names = "aclk", "iface";
+ power-domains = <&power PX30_PD_VI>;
+ rockchip,disable-mmu-reset;
+ #iommu-cells = <0>;
+ };
+
qos_gmac: qos@ff518000 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff518000 0x0 0x20>;
};
qos_gpu: qos@ff520000 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff520000 0x0 0x20>;
};
qos_sdmmc: qos@ff52c000 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff52c000 0x0 0x20>;
};
qos_emmc: qos@ff538000 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff538000 0x0 0x20>;
};
qos_nand: qos@ff538080 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff538080 0x0 0x20>;
};
qos_sdio: qos@ff538100 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff538100 0x0 0x20>;
};
qos_sfc: qos@ff538180 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff538180 0x0 0x20>;
};
qos_usb_host: qos@ff540000 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff540000 0x0 0x20>;
};
qos_usb_otg: qos@ff540080 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff540080 0x0 0x20>;
};
qos_isp_128: qos@ff548000 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff548000 0x0 0x20>;
};
qos_isp_rd: qos@ff548080 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff548080 0x0 0x20>;
};
qos_isp_wr: qos@ff548100 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff548100 0x0 0x20>;
};
qos_isp_m1: qos@ff548180 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff548180 0x0 0x20>;
};
qos_vip: qos@ff548200 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff548200 0x0 0x20>;
};
qos_rga_rd: qos@ff550000 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff550000 0x0 0x20>;
};
qos_rga_wr: qos@ff550080 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff550080 0x0 0x20>;
};
qos_vop_m0: qos@ff550100 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff550100 0x0 0x20>;
};
qos_vop_m1: qos@ff550180 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff550180 0x0 0x20>;
};
qos_vpu: qos@ff558000 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff558000 0x0 0x20>;
};
qos_vpu_r128: qos@ff558080 {
- compatible = "syscon";
+ compatible = "rockchip,px30-qos", "syscon";
reg = <0x0 0xff558080 0x0 0x20>;
};
@@ -1210,7 +1338,7 @@
#size-cells = <2>;
ranges;
- gpio0: gpio0@ff040000 {
+ gpio0: gpio@ff040000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff040000 0x0 0x100>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
@@ -1222,7 +1350,7 @@
#interrupt-cells = <2>;
};
- gpio1: gpio1@ff250000 {
+ gpio1: gpio@ff250000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff250000 0x0 0x100>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
@@ -1234,7 +1362,7 @@
#interrupt-cells = <2>;
};
- gpio2: gpio2@ff260000 {
+ gpio2: gpio@ff260000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff260000 0x0 0x100>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
@@ -1246,7 +1374,7 @@
#interrupt-cells = <2>;
};
- gpio3: gpio3@ff270000 {
+ gpio3: gpio@ff270000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff270000 0x0 0x100>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
@@ -1370,7 +1498,7 @@
};
tsadc {
- tsadc_otp_gpio: tsadc-otp-gpio {
+ tsadc_otp_pin: tsadc-otp-pin {
rockchip,pins =
<0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
};
@@ -1933,7 +2061,7 @@
};
};
- serial_flash {
+ sfc {
sfc_bus4: sfc-bus4 {
rockchip,pins =
<1 RK_PA0 3 &pcfg_pull_none>,
diff --git a/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
index 63d87e16e1..87f277f78e 100644
--- a/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
+++ b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
@@ -82,7 +82,7 @@
u-boot,dm-pre-reloc;
};
-&{/sfc@ff3a0000/flash@0} {
+&{/spi@ff3a0000/flash@0} {
u-boot,dm-pre-reloc;
};
diff --git a/arch/arm/dts/rk3326-odroid-go2.dts b/arch/arm/dts/rk3326-odroid-go2.dts
index 4e3dceecbe..ea0695b51e 100644
--- a/arch/arm/dts/rk3326-odroid-go2.dts
+++ b/arch/arm/dts/rk3326-odroid-go2.dts
@@ -14,14 +14,12 @@
model = "ODROID-GO Advance";
compatible = "hardkernel,rk3326-odroid-go2", "rockchip,rk3326";
- chosen {
- stdout-path = "serial2:115200n8";
+ aliases {
+ mmc0 = &sdmmc;
};
- backlight: backlight {
- compatible = "pwm-backlight";
- power-supply = <&vcc_bl>;
- pwms = <&pwm1 0 25000 0>;
+ chosen {
+ stdout-path = "serial2:115200n8";
};
adc-joystick {
@@ -33,21 +31,27 @@
axis@0 {
reg = <0>;
- abs-range = <172 772>;
- abs-fuzz = <10>;
abs-flat = <10>;
+ abs-fuzz = <10>;
+ abs-range = <172 772>;
linux,code = <ABS_X>;
};
axis@1 {
reg = <1>;
- abs-range = <278 815>;
- abs-fuzz = <10>;
abs-flat = <10>;
+ abs-fuzz = <10>;
+ abs-range = <278 815>;
linux,code = <ABS_Y>;
};
};
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ power-supply = <&vcc_bl>;
+ pwms = <&pwm1 0 25000 0>;
+ };
+
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
@@ -163,25 +167,26 @@
rk817-sound {
compatible = "simple-audio-card";
+ simple-audio-card,name = "Analog";
simple-audio-card,format = "i2s";
- simple-audio-card,name = "rockchip,rk817-codec";
+ simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
simple-audio-card,mclk-fs = <256>;
simple-audio-card,widgets =
"Microphone", "Mic Jack",
- "Headphone", "Headphone Jack";
+ "Headphone", "Headphones",
+ "Speaker", "Speaker";
simple-audio-card,routing =
- "MIC_IN", "Mic Jack",
- "Headphone Jack", "HPOL",
- "Headphone Jack", "HPOR";
- simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>;
- simple-audio-card,codec-hp-det = <1>;
+ "MICL", "Mic Jack",
+ "Headphones", "HPOL",
+ "Headphones", "HPOR",
+ "Speaker", "SPKO";
- simple-audio-card,cpu {
- sound-dai = <&i2s1_2ch>;
+ simple-audio-card,codec {
+ sound-dai = <&rk817>;
};
- simple-audio-card,codec {
- sound-dai = <&rk817_codec>;
+ simple-audio-card,cpu {
+ sound-dai = <&i2s1_2ch>;
};
};
@@ -202,7 +207,8 @@
gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
- vin-supply = <&vccsys>;
+ regulator-boot-on;
+ vin-supply = <&usb_midu>;
};
};
@@ -259,6 +265,7 @@
backlight = <&backlight>;
iovcc-supply = <&vcc_lcd>;
reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+ rotation = <270>;
vdd-supply = <&vcc_lcd>;
port {
@@ -289,16 +296,14 @@
reg = <0x20>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default", "pmic-sleep",
- "pmic-power-off", "pmic-reset";
- pinctrl-0 = <&pmic_int>;
- pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>;
- pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>;
- pinctrl-3 = <&soc_slppin_rst>, <&rk817_slppin_rst>;
- rockchip,system-power-controller;
+ clock-output-names = "rk808-clkout1", "xin32k";
+ clock-names = "mclk";
+ clocks = <&cru SCLK_I2S1_OUT>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
wakeup-source;
#clock-cells = <1>;
- clock-output-names = "rk808-clkout1", "xin32k";
+ #sound-dai-cells = <0>;
vcc1-supply = <&vccsys>;
vcc2-supply = <&vccsys>;
@@ -307,53 +312,7 @@
vcc5-supply = <&vccsys>;
vcc6-supply = <&vccsys>;
vcc7-supply = <&vccsys>;
-
- pinctrl_rk8xx: pinctrl_rk8xx {
- gpio-controller;
- #gpio-cells = <2>;
-
- rk817_ts_gpio1: rk817_ts_gpio1 {
- pins = "gpio_ts";
- function = "pin_fun1";
- /* output-low; */
- /* input-enable; */
- };
-
- rk817_gt_gpio2: rk817_gt_gpio2 {
- pins = "gpio_gt";
- function = "pin_fun1";
- };
-
- rk817_pin_ts: rk817_pin_ts {
- pins = "gpio_ts";
- function = "pin_fun0";
- };
-
- rk817_pin_gt: rk817_pin_gt {
- pins = "gpio_gt";
- function = "pin_fun0";
- };
-
- rk817_slppin_null: rk817_slppin_null {
- pins = "gpio_slp";
- function = "pin_fun0";
- };
-
- rk817_slppin_slp: rk817_slppin_slp {
- pins = "gpio_slp";
- function = "pin_fun1";
- };
-
- rk817_slppin_pwrdn: rk817_slppin_pwrdn {
- pins = "gpio_slp";
- function = "pin_fun2";
- };
-
- rk817_slppin_rst: rk817_slppin_rst {
- pins = "gpio_slp";
- function = "pin_fun3";
- };
- };
+ vcc8-supply = <&vccsys>;
regulators {
vdd_logic: DCDC_REG1 {
@@ -503,66 +462,18 @@
regulator-suspend-microvolt = <3000000>;
};
};
- };
- battery {
- compatible = "rk817,battery";
- ocv_table = <3500 3625 3685 3697 3718 3735 3748
- 3760 3774 3788 3802 3816 3834 3853
- 3877 3908 3946 3975 4018 4071 4106>;
-
- /* KPL605475 Battery Spec */
- /*
- Capacity : 3.7V 3000mA
- Normal Voltage = 3.7V
- Cut-Off Voltage : 3.1V
- Internal Impedance : 180 mOhm
- Charging Voltage : 4.2V
- Charging Voltage Max : 4.25V
- Sample resister : 10 mohm
- */
- design_capacity = <3000>;
- design_qmax = <3000>;
- bat_res = <180>;
- sleep_enter_current = <300>;
- sleep_exit_current = <300>;
- sleep_filter_current = <100>;
- power_off_thresd = <3500>;
- zero_algorithm_vol = <3700>;
- max_soc_offset = <60>;
- monitor_sec = <5>;
- virtual_power = <0>;
- sample_res = <10>;
- };
-
- charger {
- compatible = "rk817,charger";
- min_input_voltage = <4500>;
- max_input_current = <1500>;
- max_chrg_current = <2000>;
- max_chrg_voltage = <4200>;
- chrg_term_mode = <0>;
- chrg_finish_cur = <300>;
- virtual_power = <0>;
- sample_res = <10>;
-
- /* P.C.B rev0.2 DC Detect & Charger Status LED GPIO */
- dc_det_gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
- chg_led_gpio = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
-
- extcon = <&u2phy>;
+ usb_midu: BOOST {
+ regulator-name = "usb_midu";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
};
rk817_codec: codec {
- #sound-dai-cells = <0>;
- compatible = "rockchip,rk817-codec";
- clocks = <&cru SCLK_I2S1_OUT>;
- clock-names = "mclk";
- pinctrl-names = "default";
- pinctrl-0 = <&i2s1_2ch_mclk>;
- hp-volume = <20>;
- spk-volume = <3>;
- status = "okay";
+ rockchip,mic-in-differential;
};
};
};
@@ -604,7 +515,6 @@
};
&sdmmc {
- bus-width = <4>;
cap-sd-highspeed;
card-detect-delay = <200>;
cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/
diff --git a/configs/px30-core-ctouch2-px30_defconfig b/configs/px30-core-ctouch2-px30_defconfig
index a5dbbd7453..7d1920458e 100644
--- a/configs/px30-core-ctouch2-px30_defconfig
+++ b/configs/px30-core-ctouch2-px30_defconfig
@@ -6,7 +6,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
-CONFIG_DEFAULT_DEVICE_TREE="px30-px30-core-ctouch2"
+CONFIG_DEFAULT_DEVICE_TREE="px30-engicam-px30-core-ctouch2"
CONFIG_SPL_TEXT_BASE=0x00000000
CONFIG_ROCKCHIP_PX30=y
CONFIG_TARGET_PX30_CORE=y
@@ -23,7 +23,7 @@ CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_DEFAULT_FDT_FILE="rockchip/px30-px30-core-ctouch2.dtb"
+CONFIG_DEFAULT_FDT_FILE="rockchip/px30-engicam-px30-core-ctouch2.dtb"
# CONFIG_CONSOLE_MUX is not set
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/px30-core-edimm2.2-px30_defconfig b/configs/px30-core-edimm2.2-px30_defconfig
index 1e138d63ed..84c57337ce 100644
--- a/configs/px30-core-edimm2.2-px30_defconfig
+++ b/configs/px30-core-edimm2.2-px30_defconfig
@@ -6,7 +6,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
-CONFIG_DEFAULT_DEVICE_TREE="px30-px30-core-edimm2.2"
+CONFIG_DEFAULT_DEVICE_TREE="px30-engicam-px30-core-edimm2.2"
CONFIG_SPL_TEXT_BASE=0x00000000
CONFIG_ROCKCHIP_PX30=y
CONFIG_TARGET_PX30_CORE=y
@@ -23,7 +23,7 @@ CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_DEFAULT_FDT_FILE="rockchip/px30-px30-core-edimm2.2.dtb"
+CONFIG_DEFAULT_FDT_FILE="rockchip/px30-engicam-px30-core-edimm2.2.dtb"
# CONFIG_CONSOLE_MUX is not set
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
--
2.25.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2 3/3] engicam: px30: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF
2021-11-15 17:38 [PATCH v2 1/3] arm64: dts: rockchip: px30: Move dmc into -u-boot.dtsi Jagan Teki
2021-11-15 17:38 ` [PATCH v2 2/3] arm64: dts: rockchip: Sync px30 from linux-next Jagan Teki
@ 2021-11-15 17:38 ` Jagan Teki
2021-12-24 6:55 ` Kever Yang
2021-12-08 5:20 ` [PATCH v2 1/3] arm64: dts: rockchip: px30: Move dmc into -u-boot.dtsi Jagan Teki
2021-12-24 6:54 ` Kever Yang
3 siblings, 1 reply; 8+ messages in thread
From: Jagan Teki @ 2021-11-15 17:38 UTC (permalink / raw)
To: Kever Yang; +Cc: u-boot, linux-amarula, Jagan Teki
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
C.TOUCH 2.0 is a general purpose carrier board with capacitive
touch interface support.
10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.
PX30.Core needs to mount on top of C.TOUCH 2.0 carrier with pluged
10.1" OF for creating complete PX30.Core C.TOUCH 2.0 10.1" Open Frame.
Add support for it.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- none
arch/arm/dts/Makefile | 1 +
arch/arm/mach-rockchip/px30/Kconfig | 8 ++
board/engicam/px30_core/MAINTAINERS | 6 +
configs/px30-core-ctouch2-of10-px30_defconfig | 108 ++++++++++++++++++
4 files changed, 123 insertions(+)
create mode 100644 configs/px30-core-ctouch2-of10-px30_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 57a33d0bc4..95465d1dac 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -79,6 +79,7 @@ dtb-$(CONFIG_ROCKCHIP_PX30) += \
px30-evb.dtb \
px30-firefly.dtb \
px30-engicam-px30-core-ctouch2.dtb \
+ px30-engicam-px30-core-ctouch2-of10.dtb \
px30-engicam-px30-core-edimm2.2.dtb \
rk3326-odroid-go2.dtb
diff --git a/arch/arm/mach-rockchip/px30/Kconfig b/arch/arm/mach-rockchip/px30/Kconfig
index aa5cc471ee..145bf3591f 100644
--- a/arch/arm/mach-rockchip/px30/Kconfig
+++ b/arch/arm/mach-rockchip/px30/Kconfig
@@ -27,6 +27,14 @@ config TARGET_PX30_CORE
* PX30.Core needs to mount on top of CTOUCH2.0 for creating complete
PX30.Core C.TOUCH Carrier board.
+ PX30.Core CTOUCH2-OF10:
+ * PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
+ * CTOUCH2.0 is a general purpose Carrier board with capacitive
+ touch interface support.
+ * 10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.
+ * PX30.Core needs to mount on top of C.TOUCH 2.0 carrier with pluged
+ 10.1" OF for creating complete PX30.Core C.TOUCH 2.0 10.1" Open Frame.
+
config ROCKCHIP_BOOT_MODE_REG
default 0xff010200
diff --git a/board/engicam/px30_core/MAINTAINERS b/board/engicam/px30_core/MAINTAINERS
index b87ca22207..77f0c2dba5 100644
--- a/board/engicam/px30_core/MAINTAINERS
+++ b/board/engicam/px30_core/MAINTAINERS
@@ -4,6 +4,12 @@ M: Suniel Mahesh <sunil@amarulasolutions.com>
S: Maintained
F: configs/px30-core-ctouch2-px30_defconfig
+PX30-Core-CTOUCH2.0-OF10
+M: Jagan Teki <jagan@amarulasolutions.com>
+M: Suniel Mahesh <sunil@amarulasolutions.com>
+S: Maintained
+F: configs/px30-core-ctouch2-of10-px30_defconfig
+
PX30-Core-EDIMM2.2
M: Jagan Teki <jagan@amarulasolutions.com>
M: Suniel Mahesh <sunil@amarulasolutions.com>
diff --git a/configs/px30-core-ctouch2-of10-px30_defconfig b/configs/px30-core-ctouch2-of10-px30_defconfig
new file mode 100644
index 0000000000..664c9774eb
--- /dev/null
+++ b/configs/px30-core-ctouch2-of10-px30_defconfig
@@ -0,0 +1,108 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="px30-engicam-px30-core-ctouch2-of10"
+CONFIG_SPL_TEXT_BASE=0x00000000
+CONFIG_ROCKCHIP_PX30=y
+CONFIG_TARGET_PX30_CORE=y
+CONFIG_DEBUG_UART_CHANNEL=1
+CONFIG_TPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_DEBUG_UART_BASE=0xFF160000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART=y
+CONFIG_TPL_SYS_MALLOC_F_LEN=0x600
+CONFIG_SYS_LOAD_ADDR=0x800800
+# CONFIG_ANDROID_BOOT_IMAGE is not set
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/px30-engicam-px30-core-ctouch2-of10.dtb"
+# CONFIG_CONSOLE_MUX is not set
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_MISC_INIT_R=y
+CONFIG_SPL_BOOTROM_SUPPORT=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_STACK_R=y
+# CONFIG_TPL_BANNER_PRINT is not set
+CONFIG_SPL_ATF=y
+# CONFIG_TPL_FRAMEWORK is not set
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_LZMADEC is not set
+# CONFIG_CMD_UNZIP is not set
+CONFIG_CMD_GPT=y
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_ITEST is not set
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_ISO_PARTITION is not set
+CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_FASTBOOT_BUF_ADDR=0x800800
+CONFIG_FASTBOOT_BUF_SIZE=0x04000000
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MISC=y
+CONFIG_ROCKCHIP_OTP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+CONFIG_TPL_RAM=y
+CONFIG_ROCKCHIP_SDRAM_COMMON=y
+CONFIG_DM_RESET=y
+CONFIG_DM_RNG=y
+CONFIG_RNG_ROCKCHIP=y
+# CONFIG_SPECIFY_CONSOLE_INDEX is not set
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_DEBUG_UART_SKIP_INIT=y
+CONFIG_SOUND=y
+CONFIG_SYSRESET=y
+CONFIG_DM_THERMAL=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_DM_VIDEO=y
+CONFIG_DISPLAY=y
+CONFIG_LCD=y
+CONFIG_SPL_TINY_MEMSET=y
+CONFIG_TPL_TINY_MEMSET=y
+CONFIG_LZO=y
+CONFIG_ERRNO_STR=y
--
2.25.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v2 1/3] arm64: dts: rockchip: px30: Move dmc into -u-boot.dtsi
2021-11-15 17:38 [PATCH v2 1/3] arm64: dts: rockchip: px30: Move dmc into -u-boot.dtsi Jagan Teki
2021-11-15 17:38 ` [PATCH v2 2/3] arm64: dts: rockchip: Sync px30 from linux-next Jagan Teki
2021-11-15 17:38 ` [PATCH v2 3/3] engicam: px30: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF Jagan Teki
@ 2021-12-08 5:20 ` Jagan Teki
2021-12-23 13:27 ` Jagan Teki
2021-12-24 6:54 ` Kever Yang
3 siblings, 1 reply; 8+ messages in thread
From: Jagan Teki @ 2021-12-08 5:20 UTC (permalink / raw)
To: Kever Yang; +Cc: u-boot, linux-amarula
Hi Kever,
On Mon, Nov 15, 2021 at 11:08 PM Jagan Teki <jagan@amarulasolutions.com> wrote:
>
> dmc node is specific to U-Boot, it is always better practice
> to maintain U-Boot specific nodes into -u-boot.dtsi files
> in order to maintain Linux dts file sync compatibility.
>
> Move the dmc into px30-u-boot.dtsi, also add dmc node
> explicitly in rk3326-odroid-go2-u-boot.dtsi since it is
> using px30.dts.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v2:
> - none
>
> arch/arm/dts/px30-u-boot.dtsi | 10 ++++++----
> arch/arm/dts/px30.dtsi | 5 -----
> arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi | 10 ++++++----
> 3 files changed, 12 insertions(+), 13 deletions(-)
>
> diff --git a/arch/arm/dts/px30-u-boot.dtsi b/arch/arm/dts/px30-u-boot.dtsi
> index 029c8fbd8d..bbed7dcde5 100644
> --- a/arch/arm/dts/px30-u-boot.dtsi
> +++ b/arch/arm/dts/px30-u-boot.dtsi
> @@ -13,6 +13,12 @@
> u-boot,spl-boot-order = &emmc, &sdmmc;
> };
>
> + dmc {
> + u-boot,dm-pre-reloc;
> + compatible = "rockchip,px30-dmc", "syscon";
> + reg = <0x0 0xff2a0000 0x0 0x1000>;
> + };
> +
> rng: rng@ff0b0000 {
> compatible = "rockchip,cryptov2-rng";
> reg = <0x0 0xff0b0000 0x0 0x4000>;
> @@ -20,10 +26,6 @@
> };
> };
>
> -&dmc {
> - u-boot,dm-pre-reloc;
> -};
> -
> &uart2 {
> clock-frequency = <24000000>;
> u-boot,dm-pre-reloc;
> diff --git a/arch/arm/dts/px30.dtsi b/arch/arm/dts/px30.dtsi
> index ef706486dc..ef77b7b997 100644
> --- a/arch/arm/dts/px30.dtsi
> +++ b/arch/arm/dts/px30.dtsi
> @@ -151,11 +151,6 @@
> interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
> };
>
> - dmc: dmc {
> - compatible = "rockchip,px30-dmc", "syscon";
> - reg = <0x0 0xff2a0000 0x0 0x1000>;
> - };
> -
> display_subsystem: display-subsystem {
> compatible = "rockchip,display-subsystem";
> ports = <&vopb_out>, <&vopl_out>;
> diff --git a/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
> index bffaa3edf3..63d87e16e1 100644
> --- a/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
> +++ b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
> @@ -16,6 +16,12 @@
> serial2 = &uart2;
> spi0 = &sfc;
> };
> +
> + dmc {
> + u-boot,dm-pre-reloc;
> + compatible = "rockchip,px30-dmc", "syscon";
> + reg = <0x0 0xff2a0000 0x0 0x1000>;
> + };
> };
>
> /* U-Boot clk driver for px30 cannot set GPU_CLK */
> @@ -32,10 +38,6 @@
> <100000000>, <17000000>;
> };
>
> -&dmc {
> - u-boot,dm-pre-reloc;
> -};
> -
> &gpio0 {
> u-boot,dm-pre-reloc;
> };
> --
> 2.25.1
>
Any chance to apply these?
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2 1/3] arm64: dts: rockchip: px30: Move dmc into -u-boot.dtsi
2021-12-08 5:20 ` [PATCH v2 1/3] arm64: dts: rockchip: px30: Move dmc into -u-boot.dtsi Jagan Teki
@ 2021-12-23 13:27 ` Jagan Teki
0 siblings, 0 replies; 8+ messages in thread
From: Jagan Teki @ 2021-12-23 13:27 UTC (permalink / raw)
To: Kever Yang; +Cc: u-boot, linux-amarula
On Wed, Dec 8, 2021 at 10:50 AM Jagan Teki <jagan@amarulasolutions.com> wrote:
>
> Hi Kever,
>
> On Mon, Nov 15, 2021 at 11:08 PM Jagan Teki <jagan@amarulasolutions.com> wrote:
> >
> > dmc node is specific to U-Boot, it is always better practice
> > to maintain U-Boot specific nodes into -u-boot.dtsi files
> > in order to maintain Linux dts file sync compatibility.
> >
> > Move the dmc into px30-u-boot.dtsi, also add dmc node
> > explicitly in rk3326-odroid-go2-u-boot.dtsi since it is
> > using px30.dts.
> >
> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > ---
> > Changes for v2:
> > - none
> >
> > arch/arm/dts/px30-u-boot.dtsi | 10 ++++++----
> > arch/arm/dts/px30.dtsi | 5 -----
> > arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi | 10 ++++++----
> > 3 files changed, 12 insertions(+), 13 deletions(-)
> >
> > diff --git a/arch/arm/dts/px30-u-boot.dtsi b/arch/arm/dts/px30-u-boot.dtsi
> > index 029c8fbd8d..bbed7dcde5 100644
> > --- a/arch/arm/dts/px30-u-boot.dtsi
> > +++ b/arch/arm/dts/px30-u-boot.dtsi
> > @@ -13,6 +13,12 @@
> > u-boot,spl-boot-order = &emmc, &sdmmc;
> > };
> >
> > + dmc {
> > + u-boot,dm-pre-reloc;
> > + compatible = "rockchip,px30-dmc", "syscon";
> > + reg = <0x0 0xff2a0000 0x0 0x1000>;
> > + };
> > +
> > rng: rng@ff0b0000 {
> > compatible = "rockchip,cryptov2-rng";
> > reg = <0x0 0xff0b0000 0x0 0x4000>;
> > @@ -20,10 +26,6 @@
> > };
> > };
> >
> > -&dmc {
> > - u-boot,dm-pre-reloc;
> > -};
> > -
> > &uart2 {
> > clock-frequency = <24000000>;
> > u-boot,dm-pre-reloc;
> > diff --git a/arch/arm/dts/px30.dtsi b/arch/arm/dts/px30.dtsi
> > index ef706486dc..ef77b7b997 100644
> > --- a/arch/arm/dts/px30.dtsi
> > +++ b/arch/arm/dts/px30.dtsi
> > @@ -151,11 +151,6 @@
> > interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
> > };
> >
> > - dmc: dmc {
> > - compatible = "rockchip,px30-dmc", "syscon";
> > - reg = <0x0 0xff2a0000 0x0 0x1000>;
> > - };
> > -
> > display_subsystem: display-subsystem {
> > compatible = "rockchip,display-subsystem";
> > ports = <&vopb_out>, <&vopl_out>;
> > diff --git a/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
> > index bffaa3edf3..63d87e16e1 100644
> > --- a/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
> > +++ b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
> > @@ -16,6 +16,12 @@
> > serial2 = &uart2;
> > spi0 = &sfc;
> > };
> > +
> > + dmc {
> > + u-boot,dm-pre-reloc;
> > + compatible = "rockchip,px30-dmc", "syscon";
> > + reg = <0x0 0xff2a0000 0x0 0x1000>;
> > + };
> > };
> >
> > /* U-Boot clk driver for px30 cannot set GPU_CLK */
> > @@ -32,10 +38,6 @@
> > <100000000>, <17000000>;
> > };
> >
> > -&dmc {
> > - u-boot,dm-pre-reloc;
> > -};
> > -
> > &gpio0 {
> > u-boot,dm-pre-reloc;
> > };
> > --
> > 2.25.1
> >
>
> Any chance to apply these?
Gentle ping!
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2 1/3] arm64: dts: rockchip: px30: Move dmc into -u-boot.dtsi
2021-11-15 17:38 [PATCH v2 1/3] arm64: dts: rockchip: px30: Move dmc into -u-boot.dtsi Jagan Teki
` (2 preceding siblings ...)
2021-12-08 5:20 ` [PATCH v2 1/3] arm64: dts: rockchip: px30: Move dmc into -u-boot.dtsi Jagan Teki
@ 2021-12-24 6:54 ` Kever Yang
3 siblings, 0 replies; 8+ messages in thread
From: Kever Yang @ 2021-12-24 6:54 UTC (permalink / raw)
To: Jagan Teki; +Cc: u-boot, linux-amarula
On 2021/11/16 上午1:38, Jagan Teki wrote:
> dmc node is specific to U-Boot, it is always better practice
> to maintain U-Boot specific nodes into -u-boot.dtsi files
> in order to maintain Linux dts file sync compatibility.
>
> Move the dmc into px30-u-boot.dtsi, also add dmc node
> explicitly in rk3326-odroid-go2-u-boot.dtsi since it is
> using px30.dts.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Thanks,
- Kever
> ---
> Changes for v2:
> - none
>
> arch/arm/dts/px30-u-boot.dtsi | 10 ++++++----
> arch/arm/dts/px30.dtsi | 5 -----
> arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi | 10 ++++++----
> 3 files changed, 12 insertions(+), 13 deletions(-)
>
> diff --git a/arch/arm/dts/px30-u-boot.dtsi b/arch/arm/dts/px30-u-boot.dtsi
> index 029c8fbd8d..bbed7dcde5 100644
> --- a/arch/arm/dts/px30-u-boot.dtsi
> +++ b/arch/arm/dts/px30-u-boot.dtsi
> @@ -13,6 +13,12 @@
> u-boot,spl-boot-order = &emmc, &sdmmc;
> };
>
> + dmc {
> + u-boot,dm-pre-reloc;
> + compatible = "rockchip,px30-dmc", "syscon";
> + reg = <0x0 0xff2a0000 0x0 0x1000>;
> + };
> +
> rng: rng@ff0b0000 {
> compatible = "rockchip,cryptov2-rng";
> reg = <0x0 0xff0b0000 0x0 0x4000>;
> @@ -20,10 +26,6 @@
> };
> };
>
> -&dmc {
> - u-boot,dm-pre-reloc;
> -};
> -
> &uart2 {
> clock-frequency = <24000000>;
> u-boot,dm-pre-reloc;
> diff --git a/arch/arm/dts/px30.dtsi b/arch/arm/dts/px30.dtsi
> index ef706486dc..ef77b7b997 100644
> --- a/arch/arm/dts/px30.dtsi
> +++ b/arch/arm/dts/px30.dtsi
> @@ -151,11 +151,6 @@
> interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
> };
>
> - dmc: dmc {
> - compatible = "rockchip,px30-dmc", "syscon";
> - reg = <0x0 0xff2a0000 0x0 0x1000>;
> - };
> -
> display_subsystem: display-subsystem {
> compatible = "rockchip,display-subsystem";
> ports = <&vopb_out>, <&vopl_out>;
> diff --git a/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
> index bffaa3edf3..63d87e16e1 100644
> --- a/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
> +++ b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
> @@ -16,6 +16,12 @@
> serial2 = &uart2;
> spi0 = &sfc;
> };
> +
> + dmc {
> + u-boot,dm-pre-reloc;
> + compatible = "rockchip,px30-dmc", "syscon";
> + reg = <0x0 0xff2a0000 0x0 0x1000>;
> + };
> };
>
> /* U-Boot clk driver for px30 cannot set GPU_CLK */
> @@ -32,10 +38,6 @@
> <100000000>, <17000000>;
> };
>
> -&dmc {
> - u-boot,dm-pre-reloc;
> -};
> -
> &gpio0 {
> u-boot,dm-pre-reloc;
> };
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2 2/3] arm64: dts: rockchip: Sync px30 from linux-next
2021-11-15 17:38 ` [PATCH v2 2/3] arm64: dts: rockchip: Sync px30 from linux-next Jagan Teki
@ 2021-12-24 6:55 ` Kever Yang
0 siblings, 0 replies; 8+ messages in thread
From: Kever Yang @ 2021-12-24 6:55 UTC (permalink / raw)
To: Jagan Teki; +Cc: u-boot, linux-amarula
On 2021/11/16 上午1:38, Jagan Teki wrote:
> Sync the px30 devicetree files from linux-next tree.
>
> commit <14ce8069f48b> ("lib/stackdepot: allow optional init and
> stack_table allocation by kvmalloc() - fixup3")
>
> Note, this path even sync rk3326 files as it depends on px30.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Thanks,
- Kever
> ---
> Changes for v2:
> - add sync on v5.15
> - add sync on rk3326
>
> arch/arm/dts/Makefile | 4 +-
> arch/arm/dts/px30-engicam-common.dtsi | 90 ++++++
> arch/arm/dts/px30-engicam-ctouch2.dtsi | 22 ++
> arch/arm/dts/px30-engicam-edimm2.2.dtsi | 59 ++++
> .../px30-engicam-px30-core-ctouch2-of10.dts | 77 +++++
> ...dts => px30-engicam-px30-core-ctouch2.dts} | 4 +-
> .../dts/px30-engicam-px30-core-edimm2.2.dts | 43 +++
> ...-core.dtsi => px30-engicam-px30-core.dtsi} | 11 +-
> arch/arm/dts/px30-evb.dts | 143 ++++++++--
> arch/arm/dts/px30-px30-core-edimm2.2.dts | 21 --
> arch/arm/dts/px30-u-boot.dtsi | 4 +
> arch/arm/dts/px30.dtsi | 270 +++++++++++++-----
> arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi | 2 +-
> arch/arm/dts/rk3326-odroid-go2.dts | 178 +++---------
> configs/px30-core-ctouch2-px30_defconfig | 4 +-
> configs/px30-core-edimm2.2-px30_defconfig | 4 +-
> 16 files changed, 681 insertions(+), 255 deletions(-)
> create mode 100644 arch/arm/dts/px30-engicam-px30-core-ctouch2-of10.dts
> rename arch/arm/dts/{px30-px30-core-ctouch2.dts => px30-engicam-px30-core-ctouch2.dts} (80%)
> create mode 100644 arch/arm/dts/px30-engicam-px30-core-edimm2.2.dts
> rename arch/arm/dts/{px30-px30-core.dtsi => px30-engicam-px30-core.dtsi} (96%)
> delete mode 100644 arch/arm/dts/px30-px30-core-edimm2.2.dts
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index cc34da7bd8..57a33d0bc4 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -78,8 +78,8 @@ dtb-$(CONFIG_MACH_S700) += \
> dtb-$(CONFIG_ROCKCHIP_PX30) += \
> px30-evb.dtb \
> px30-firefly.dtb \
> - px30-px30-core-ctouch2.dtb \
> - px30-px30-core-edimm2.2.dtb \
> + px30-engicam-px30-core-ctouch2.dtb \
> + px30-engicam-px30-core-edimm2.2.dtb \
> rk3326-odroid-go2.dtb
>
> dtb-$(CONFIG_ROCKCHIP_RK3036) += \
> diff --git a/arch/arm/dts/px30-engicam-common.dtsi b/arch/arm/dts/px30-engicam-common.dtsi
> index bd5bde989e..3429e124d9 100644
> --- a/arch/arm/dts/px30-engicam-common.dtsi
> +++ b/arch/arm/dts/px30-engicam-common.dtsi
> @@ -6,6 +6,11 @@
> */
>
> / {
> + aliases {
> + mmc1 = &sdmmc;
> + mmc2 = &sdio;
> + };
> +
> vcc5v0_sys: vcc5v0-sys {
> compatible = "regulator-fixed";
> regulator-name = "vcc5v0_sys"; /* +5V */
> @@ -14,6 +19,63 @@
> regulator-min-microvolt = <5000000>;
> regulator-max-microvolt = <5000000>;
> };
> +
> + sdio_pwrseq: sdio-pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + clocks = <&xin32k>;
> + clock-names = "ext_clock";
> + post-power-on-delay-ms = <80>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&wifi_enable_h>;
> + };
> +
> + vcc3v3_btreg: vcc3v3-btreg {
> + compatible = "regulator-gpio";
> + enable-active-high;
> + pinctrl-names = "default";
> + pinctrl-0 = <&bt_enable_h>;
> + regulator-name = "btreg-gpio-supply";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + states = <3300000 0x0>;
> + };
> +
> + vcc3v3_rf_aux_mod: vcc3v3-rf-aux-mod {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc3v3_rf_aux_mod";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc5v0_sys>;
> + };
> +
> + xin32k: xin32k {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + clock-output-names = "xin32k";
> + };
> +};
> +
> +&sdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + bus-width = <4>;
> + clock-frequency = <50000000>;
> + cap-sdio-irq;
> + cap-sd-highspeed;
> + keep-power-in-suspend;
> + mmc-pwrseq = <&sdio_pwrseq>;
> + non-removable;
> + sd-uhs-sdr104;
> + status = "okay";
> +
> + brcmf: wifi@1 {
> + compatible = "brcm,bcm4329-fmac";
> + reg = <1>;
> + };
> };
>
> &gmac {
> @@ -25,6 +87,10 @@
> status = "okay";
> };
>
> +&pwm0 {
> + status = "okay";
> +};
> +
> &sdmmc {
> cap-sd-highspeed;
> card-detect-delay = <800>;
> @@ -33,7 +99,31 @@
> status = "okay";
> };
>
> +&u2phy {
> + status = "okay";
> +
> + u2phy_host: host-port {
> + status = "okay";
> + };
> +
> + u2phy_otg: otg-port {
> + status = "okay";
> + };
> +};
> +
> &uart2 {
> pinctrl-0 = <&uart2m1_xfer>;
> status = "okay";
> };
> +
> +&usb20_otg {
> + status = "okay";
> +};
> +
> +&usb_host0_ehci {
> + status = "okay";
> +};
> +
> +&usb_host0_ohci {
> + status = "okay";
> +};
> diff --git a/arch/arm/dts/px30-engicam-ctouch2.dtsi b/arch/arm/dts/px30-engicam-ctouch2.dtsi
> index 58425b1e55..bf10a3d29f 100644
> --- a/arch/arm/dts/px30-engicam-ctouch2.dtsi
> +++ b/arch/arm/dts/px30-engicam-ctouch2.dtsi
> @@ -6,3 +6,25 @@
> */
>
> #include "px30-engicam-common.dtsi"
> +
> +&pinctrl {
> + bt {
> + bt_enable_h: bt-enable-h {
> + rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + sdio-pwrseq {
> + wifi_enable_h: wifi-enable-h {
> + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +};
> +
> +&sdio_pwrseq {
> + reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
> +};
> +
> +&vcc3v3_btreg {
> + enable-gpio = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>;
> +};
> diff --git a/arch/arm/dts/px30-engicam-edimm2.2.dtsi b/arch/arm/dts/px30-engicam-edimm2.2.dtsi
> index cb00988953..449b8eb645 100644
> --- a/arch/arm/dts/px30-engicam-edimm2.2.dtsi
> +++ b/arch/arm/dts/px30-engicam-edimm2.2.dtsi
> @@ -5,3 +5,62 @@
> */
>
> #include "px30-engicam-common.dtsi"
> +
> +/ {
> + backlight: backlight {
> + compatible = "pwm-backlight";
> + pwms = <&pwm0 0 25000 0>;
> + };
> +
> + panel {
> + compatible = "yes-optoelectronics,ytc700tlag-05-201c";
> + backlight = <&backlight>;
> + data-mapping = "vesa-24";
> + power-supply = <&vcc3v3_lcd>;
> +
> + port {
> + panel_in_lvds: endpoint {
> + remote-endpoint = <&lvds_out_panel>;
> + };
> + };
> + };
> +};
> +
> +&display_subsystem {
> + status = "okay";
> +};
> +
> +&dsi_dphy {
> + status = "okay";
> +};
> +
> +/* LVDS_B(secondary) */
> +&lvds {
> + status = "okay";
> +
> + ports {
> + port@1 {
> + reg = <1>;
> +
> + lvds_out_panel: endpoint {
> + remote-endpoint = <&panel_in_lvds>;
> + };
> + };
> + };
> +};
> +
> +&vopb {
> + status = "okay";
> +};
> +
> +&vopb_mmu {
> + status = "okay";
> +};
> +
> +&vopl {
> + status = "okay";
> +};
> +
> +&vopl_mmu {
> + status = "okay";
> +};
> diff --git a/arch/arm/dts/px30-engicam-px30-core-ctouch2-of10.dts b/arch/arm/dts/px30-engicam-px30-core-ctouch2-of10.dts
> new file mode 100644
> index 0000000000..47aa30505a
> --- /dev/null
> +++ b/arch/arm/dts/px30-engicam-px30-core-ctouch2-of10.dts
> @@ -0,0 +1,77 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
> + * Copyright (c) 2020 Engicam srl
> + * Copyright (c) 2020 Amarula Solutions(India)
> + */
> +
> +/dts-v1/;
> +#include "px30.dtsi"
> +#include "px30-engicam-ctouch2.dtsi"
> +#include "px30-engicam-px30-core.dtsi"
> +
> +/ {
> + model = "Engicam PX30.Core C.TOUCH 2.0 10.1\" Open Frame";
> + compatible = "engicam,px30-core-ctouch2-of10", "engicam,px30-core",
> + "rockchip,px30";
> +
> + backlight: backlight {
> + compatible = "pwm-backlight";
> + pwms = <&pwm0 0 25000 0>;
> + };
> +
> + chosen {
> + stdout-path = "serial2:115200n8";
> + };
> +
> + panel {
> + compatible = "ampire,am-1280800n3tzqw-t00h";
> + backlight = <&backlight>;
> + power-supply = <&vcc3v3_lcd>;
> + data-mapping = "vesa-24";
> +
> + port {
> + panel_in_lvds: endpoint {
> + remote-endpoint = <&lvds_out_panel>;
> + };
> + };
> + };
> +};
> +
> +&display_subsystem {
> + status = "okay";
> +};
> +
> +&dsi_dphy {
> + status = "okay";
> +};
> +
> +&lvds {
> + status = "okay";
> +
> + ports {
> + port@1 {
> + reg = <1>;
> +
> + lvds_out_panel: endpoint {
> + remote-endpoint = <&panel_in_lvds>;
> + };
> + };
> + };
> +};
> +
> +&vopb {
> + status = "okay";
> +};
> +
> +&vopb_mmu {
> + status = "okay";
> +};
> +
> +&vopl {
> + status = "okay";
> +};
> +
> +&vopl_mmu {
> + status = "okay";
> +};
> diff --git a/arch/arm/dts/px30-px30-core-ctouch2.dts b/arch/arm/dts/px30-engicam-px30-core-ctouch2.dts
> similarity index 80%
> rename from arch/arm/dts/px30-px30-core-ctouch2.dts
> rename to arch/arm/dts/px30-engicam-px30-core-ctouch2.dts
> index 2da0128188..5a0ecb8fae 100644
> --- a/arch/arm/dts/px30-px30-core-ctouch2.dts
> +++ b/arch/arm/dts/px30-engicam-px30-core-ctouch2.dts
> @@ -9,11 +9,11 @@
> /dts-v1/;
> #include "px30.dtsi"
> #include "px30-engicam-ctouch2.dtsi"
> -#include "px30-px30-core.dtsi"
> +#include "px30-engicam-px30-core.dtsi"
>
> / {
> model = "Engicam PX30.Core C.TOUCH 2.0";
> - compatible = "engicam,px30-core-ctouch2", "engicam,px30-px30-core",
> + compatible = "engicam,px30-core-ctouch2", "engicam,px30-core",
> "rockchip,px30";
>
> chosen {
> diff --git a/arch/arm/dts/px30-engicam-px30-core-edimm2.2.dts b/arch/arm/dts/px30-engicam-px30-core-edimm2.2.dts
> new file mode 100644
> index 0000000000..d759478e1c
> --- /dev/null
> +++ b/arch/arm/dts/px30-engicam-px30-core-edimm2.2.dts
> @@ -0,0 +1,43 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
> + * Copyright (c) 2020 Engicam srl
> + * Copyright (c) 2020 Amarula Solutions(India)
> + */
> +
> +/dts-v1/;
> +#include "px30.dtsi"
> +#include "px30-engicam-edimm2.2.dtsi"
> +#include "px30-engicam-px30-core.dtsi"
> +
> +/ {
> + model = "Engicam PX30.Core EDIMM2.2 Starter Kit";
> + compatible = "engicam,px30-core-edimm2.2", "engicam,px30-core",
> + "rockchip,px30";
> +
> + chosen {
> + stdout-path = "serial2:115200n8";
> + };
> +};
> +
> +&pinctrl {
> + bt {
> + bt_enable_h: bt-enable-h {
> + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + sdio-pwrseq {
> + wifi_enable_h: wifi-enable-h {
> + rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +};
> +
> +&sdio_pwrseq {
> + reset-gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_LOW>;
> +};
> +
> +&vcc3v3_btreg {
> + enable-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
> +};
> diff --git a/arch/arm/dts/px30-px30-core.dtsi b/arch/arm/dts/px30-engicam-px30-core.dtsi
> similarity index 96%
> rename from arch/arm/dts/px30-px30-core.dtsi
> rename to arch/arm/dts/px30-engicam-px30-core.dtsi
> index 16e6cf28a4..7249871530 100644
> --- a/arch/arm/dts/px30-px30-core.dtsi
> +++ b/arch/arm/dts/px30-engicam-px30-core.dtsi
> @@ -10,7 +10,11 @@
> #include <dt-bindings/pinctrl/rockchip.h>
>
> / {
> - compatible = "engicam,px30-px30-core", "rockchip,px30";
> + compatible = "engicam,px30-core", "rockchip,px30";
> +
> + aliases {
> + mmc0 = &emmc;
> + };
> };
>
> &cpu0 {
> @@ -192,6 +196,11 @@
> };
> };
>
> + vcc3v3_lcd: SWITCH_REG1 {
> + regulator-boot-on;
> + regulator-name = "vcc3v3_lcd";
> + };
> +
> vcc5v0_host: SWITCH_REG2 {
> regulator-name = "vcc5v0_host";
> regulator-always-on;
> diff --git a/arch/arm/dts/px30-evb.dts b/arch/arm/dts/px30-evb.dts
> index 4134e2ee13..848bc39cf8 100644
> --- a/arch/arm/dts/px30-evb.dts
> +++ b/arch/arm/dts/px30-evb.dts
> @@ -13,8 +13,14 @@
> model = "Rockchip PX30 EVB";
> compatible = "rockchip,px30-evb", "rockchip,px30";
>
> + aliases {
> + mmc0 = &sdmmc;
> + mmc1 = &sdio;
> + mmc2 = &emmc;
> + };
> +
> chosen {
> - stdout-path = "serial2:115200n8";
> + stdout-path = "serial5:115200n8";
> };
>
> adc-keys {
> @@ -108,6 +114,10 @@
> cpu-supply = <&vdd_arm>;
> };
>
> +&csi_dphy {
> + status = "okay";
> +};
> +
> &display_subsystem {
> status = "okay";
> };
> @@ -126,22 +136,15 @@
> };
>
> panel@0 {
> - compatible = "sitronix,st7703";
> + compatible = "xinpeng,xpp055c272";
> reg = <0>;
> backlight = <&backlight>;
> iovcc-supply = <&vcc_1v8>;
> vci-supply = <&vcc3v3_lcd>;
>
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - port@0 {
> - reg = <0>;
> -
> - mipi_in_panel: endpoint {
> - remote-endpoint = <&mipi_out_panel>;
> - };
> + port {
> + mipi_in_panel: endpoint {
> + remote-endpoint = <&mipi_out_panel>;
> };
> };
> };
> @@ -152,7 +155,6 @@
> };
>
> &emmc {
> - bus-width = <8>;
> cap-mmc-highspeed;
> mmc-hs200-1_8v;
> non-removable;
> @@ -171,6 +173,11 @@
> status = "okay";
> };
>
> +&gpu {
> + mali-supply = <&vdd_log>;
> + status = "okay";
> +};
> +
> &i2c0 {
> status = "okay";
>
> @@ -388,6 +395,73 @@
> };
> };
>
> +&i2c1 {
> + status = "okay";
> +
> + sensor@d {
> + compatible = "asahi-kasei,ak8963";
> + reg = <0x0d>;
> + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
> + vdd-supply = <&vcc3v0_pmu>;
> + mount-matrix = "1", /* x0 */
> + "0", /* y0 */
> + "0", /* z0 */
> + "0", /* x1 */
> + "1", /* y1 */
> + "0", /* z1 */
> + "0", /* x2 */
> + "0", /* y2 */
> + "1"; /* z2 */
> + };
> +
> + touchscreen@14 {
> + compatible = "goodix,gt1151";
> + reg = <0x14>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
> + irq-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
> + reset-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
> + VDDIO-supply = <&vcc3v3_lcd>;
> + };
> +
> + sensor@4c {
> + compatible = "fsl,mma7660";
> + reg = <0x4c>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <RK_PB7 IRQ_TYPE_LEVEL_LOW>;
> + };
> +};
> +
> +&i2c2 {
> + status = "okay";
> +
> + clock-frequency = <100000>;
> +
> + /* These are relatively safe rise/fall times; TODO: measure */
> + i2c-scl-falling-time-ns = <50>;
> + i2c-scl-rising-time-ns = <300>;
> +
> + ov5695: ov5695@36 {
> + compatible = "ovti,ov5695";
> + reg = <0x36>;
> + avdd-supply = <&vcc2v8_dvp>;
> + clocks = <&cru SCLK_CIF_OUT>;
> + clock-names = "xvclk";
> + dvdd-supply = <&vcc1v5_dvp>;
> + dovdd-supply = <&vcc1v8_dvp>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&cif_clkout_m0>;
> + reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
> +
> + port {
> + ucam_out: endpoint {
> + remote-endpoint = <&mipi_in_ucam>;
> + data-lanes = <1 2>;
> + };
> + };
> + };
> +};
> +
> &i2s1_2ch {
> status = "okay";
> };
> @@ -403,6 +477,24 @@
> vccio6-supply = <&vccio_flash>;
> };
>
> +&isp {
> + status = "okay";
> +
> + ports {
> + port@0 {
> + mipi_in_ucam: endpoint@0 {
> + reg = <0>;
> + data-lanes = <1 2>;
> + remote-endpoint = <&ucam_out>;
> + };
> + };
> + };
> +};
> +
> +&isp_mmu {
> + status = "okay";
> +};
> +
> &pinctrl {
> headphone {
> hp_det: hp-det {
> @@ -464,7 +556,6 @@
> };
>
> &sdmmc {
> - bus-width = <4>;
> cap-mmc-highspeed;
> cap-sd-highspeed;
> card-detect-delay = <800>;
> @@ -474,10 +565,10 @@
> sd-uhs-sdr104;
> vmmc-supply = <&vcc_sd>;
> vqmmc-supply = <&vccio_sd>;
> + status = "okay";
> };
>
> &sdio {
> - bus-width = <4>;
> cap-sd-highspeed;
> keep-power-in-suspend;
> non-removable;
> @@ -486,13 +577,27 @@
> status = "okay";
> };
>
> -&uart1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&uart1_xfer &uart1_cts>;
> +&tsadc {
> + rockchip,hw-tshut-mode = <1>;
> + rockchip,hw-tshut-polarity = <1>;
> status = "okay";
> };
>
> -&uart2 {
> +&u2phy {
> + status = "okay";
> +
> + u2phy_host: host-port {
> + status = "okay";
> + };
> +
> + u2phy_otg: otg-port {
> + status = "okay";
> + };
> +};
> +
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart1_xfer &uart1_cts>;
> status = "okay";
> };
>
> diff --git a/arch/arm/dts/px30-px30-core-edimm2.2.dts b/arch/arm/dts/px30-px30-core-edimm2.2.dts
> deleted file mode 100644
> index c36280ce7f..0000000000
> --- a/arch/arm/dts/px30-px30-core-edimm2.2.dts
> +++ /dev/null
> @@ -1,21 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -/*
> - * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
> - * Copyright (c) 2020 Engicam srl
> - * Copyright (c) 2020 Amarula Solutions(India)
> - */
> -
> -/dts-v1/;
> -#include "px30.dtsi"
> -#include "px30-engicam-edimm2.2.dtsi"
> -#include "px30-px30-core.dtsi"
> -
> -/ {
> - model = "Engicam PX30.Core EDIMM2.2 Starter Kit";
> - compatible = "engicam,px30-core-edimm2.2", "engicam,px30-px30-core",
> - "rockchip,px30";
> -
> - chosen {
> - stdout-path = "serial2:115200n8";
> - };
> -};
> diff --git a/arch/arm/dts/px30-u-boot.dtsi b/arch/arm/dts/px30-u-boot.dtsi
> index bbed7dcde5..f102b2aef4 100644
> --- a/arch/arm/dts/px30-u-boot.dtsi
> +++ b/arch/arm/dts/px30-u-boot.dtsi
> @@ -64,10 +64,14 @@
>
> &cru {
> u-boot,dm-pre-reloc;
> + /delete-property/ assigned-clocks;
> + /delete-property/ assigned-clock-rates;
> };
>
> &pmucru {
> u-boot,dm-pre-reloc;
> + /delete-property/ assigned-clocks;
> + /delete-property/ assigned-clock-rates;
> };
>
> &saradc {
> diff --git a/arch/arm/dts/px30.dtsi b/arch/arm/dts/px30.dtsi
> index ef77b7b997..00f50b05d5 100644
> --- a/arch/arm/dts/px30.dtsi
> +++ b/arch/arm/dts/px30.dtsi
> @@ -110,7 +110,7 @@
> };
> };
>
> - cpu0_opp_table: cpu0-opp-table {
> + cpu0_opp_table: opp-table-0 {
> compatible = "operating-points-v2";
> opp-shared;
>
> @@ -143,7 +143,7 @@
> };
>
> arm-pmu {
> - compatible = "arm,cortex-a53-pmu";
> + compatible = "arm,cortex-a35-pmu";
> interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
> @@ -244,28 +244,31 @@
> #size-cells = <0>;
>
> /* These power domains are grouped by VD_LOGIC */
> - pd_usb@PX30_PD_USB {
> + power-domain@PX30_PD_USB {
> reg = <PX30_PD_USB>;
> clocks = <&cru HCLK_HOST>,
> <&cru HCLK_OTG>,
> <&cru SCLK_OTG_ADP>;
> pm_qos = <&qos_usb_host>, <&qos_usb_otg>;
> + #power-domain-cells = <0>;
> };
> - pd_sdcard@PX30_PD_SDCARD {
> + power-domain@PX30_PD_SDCARD {
> reg = <PX30_PD_SDCARD>;
> clocks = <&cru HCLK_SDMMC>,
> <&cru SCLK_SDMMC>;
> pm_qos = <&qos_sdmmc>;
> + #power-domain-cells = <0>;
> };
> - pd_gmac@PX30_PD_GMAC {
> + power-domain@PX30_PD_GMAC {
> reg = <PX30_PD_GMAC>;
> clocks = <&cru ACLK_GMAC>,
> <&cru PCLK_GMAC>,
> <&cru SCLK_MAC_REF>,
> <&cru SCLK_GMAC_RX_TX>;
> pm_qos = <&qos_gmac>;
> + #power-domain-cells = <0>;
> };
> - pd_mmc_nand@PX30_PD_MMC_NAND {
> + power-domain@PX30_PD_MMC_NAND {
> reg = <PX30_PD_MMC_NAND>;
> clocks = <&cru HCLK_NANDC>,
> <&cru HCLK_EMMC>,
> @@ -277,15 +280,17 @@
> <&cru SCLK_SFC>;
> pm_qos = <&qos_emmc>, <&qos_nand>,
> <&qos_sdio>, <&qos_sfc>;
> + #power-domain-cells = <0>;
> };
> - pd_vpu@PX30_PD_VPU {
> + power-domain@PX30_PD_VPU {
> reg = <PX30_PD_VPU>;
> clocks = <&cru ACLK_VPU>,
> <&cru HCLK_VPU>,
> <&cru SCLK_CORE_VPU>;
> pm_qos = <&qos_vpu>, <&qos_vpu_r128>;
> + #power-domain-cells = <0>;
> };
> - pd_vo@PX30_PD_VO {
> + power-domain@PX30_PD_VO {
> reg = <PX30_PD_VO>;
> clocks = <&cru ACLK_RGA>,
> <&cru ACLK_VOPB>,
> @@ -300,8 +305,9 @@
> <&cru SCLK_VOPB_PWM>;
> pm_qos = <&qos_rga_rd>, <&qos_rga_wr>,
> <&qos_vop_m0>, <&qos_vop_m1>;
> + #power-domain-cells = <0>;
> };
> - pd_vi@PX30_PD_VI {
> + power-domain@PX30_PD_VI {
> reg = <PX30_PD_VI>;
> clocks = <&cru ACLK_CIF>,
> <&cru ACLK_ISP>,
> @@ -311,11 +317,13 @@
> pm_qos = <&qos_isp_128>, <&qos_isp_rd>,
> <&qos_isp_wr>, <&qos_isp_m1>,
> <&qos_vip>;
> + #power-domain-cells = <0>;
> };
> - pd_gpu@PX30_PD_GPU {
> + power-domain@PX30_PD_GPU {
> reg = <PX30_PD_GPU>;
> clocks = <&cru SCLK_GPU>;
> pm_qos = <&qos_gpu>;
> + #power-domain-cells = <0>;
> };
> };
> };
> @@ -600,7 +608,7 @@
> };
>
> wdt: watchdog@ff1e0000 {
> - compatible = "snps,dw-wdt";
> + compatible = "rockchip,px30-wdt", "snps,dw-wdt";
> reg = <0x0 0xff1e0000 0x0 0x100>;
> clocks = <&cru PCLK_WDT_NS>;
> interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> @@ -703,21 +711,15 @@
> clock-names = "pclk", "timer";
> };
>
> - amba {
> - compatible = "simple-bus";
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges;
> -
> - dmac: dmac@ff240000 {
> - compatible = "arm,pl330", "arm,primecell";
> - reg = <0x0 0xff240000 0x0 0x4000>;
> - interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cru ACLK_DMAC>;
> - clock-names = "apb_pclk";
> - #dma-cells = <1>;
> - };
> + dmac: dmac@ff240000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x0 0xff240000 0x0 0x4000>;
> + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
> + arm,pl330-periph-burst;
> + clocks = <&cru ACLK_DMAC>;
> + clock-names = "apb_pclk";
> + #dma-cells = <1>;
> };
>
> tsadc: tsadc@ff280000 {
> @@ -733,9 +735,9 @@
> rockchip,grf = <&grf>;
> rockchip,hw-tshut-temp = <120000>;
> pinctrl-names = "init", "default", "sleep";
> - pinctrl-0 = <&tsadc_otp_gpio>;
> + pinctrl-0 = <&tsadc_otp_pin>;
> pinctrl-1 = <&tsadc_otp_out>;
> - pinctrl-2 = <&tsadc_otp_gpio>;
> + pinctrl-2 = <&tsadc_otp_pin>;
> #thermal-sensor-cells = <1>;
> status = "disabled";
> };
> @@ -784,6 +786,16 @@
> rockchip,grf = <&grf>;
> #clock-cells = <1>;
> #reset-cells = <1>;
> +
> + assigned-clocks = <&cru PLL_NPLL>,
> + <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
> + <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
> + <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>;
> +
> + assigned-clock-rates = <1188000000>,
> + <200000000>, <200000000>,
> + <150000000>, <150000000>,
> + <100000000>, <200000000>;
> };
>
> pmucru: clock-controller@ff2bc000 {
> @@ -794,6 +806,13 @@
> rockchip,grf = <&grf>;
> #clock-cells = <1>;
> #reset-cells = <1>;
> +
> + assigned-clocks =
> + <&pmucru PLL_GPLL>, <&pmucru PCLK_PMU_PRE>,
> + <&pmucru SCLK_WIFI_PMU>;
> + assigned-clock-rates =
> + <1200000000>, <100000000>,
> + <26000000>;
> };
>
> usb2phy_grf: syscon@ff2c0000 {
> @@ -803,7 +822,7 @@
> #address-cells = <1>;
> #size-cells = <1>;
>
> - u2phy: usb2-phy@100 {
> + u2phy: usb2phy@100 {
> compatible = "rockchip,px30-usb2phy";
> reg = <0x100 0x20>;
> clocks = <&pmucru SCLK_USBPHY_REF>;
> @@ -845,6 +864,19 @@
> status = "disabled";
> };
>
> + csi_dphy: phy@ff2f0000 {
> + compatible = "rockchip,px30-csi-dphy";
> + reg = <0x0 0xff2f0000 0x0 0x4000>;
> + clocks = <&cru PCLK_MIPICSIPHY>;
> + clock-names = "pclk";
> + #phy-cells = <0>;
> + power-domains = <&power PX30_PD_VI>;
> + resets = <&cru SRST_MIPICSIPHY_P>;
> + reset-names = "apb";
> + rockchip,grf = <&grf>;
> + status = "disabled";
> + };
> +
> usb20_otg: usb@ff300000 {
> compatible = "rockchip,px30-usb", "rockchip,rk3066-usb",
> "snps,dwc2";
> @@ -856,7 +888,6 @@
> g-np-tx-fifo-size = <16>;
> g-rx-fifo-size = <280>;
> g-tx-fifo-size = <256 128 128 64 32 16>;
> - g-use-dma;
> phys = <&u2phy_otg>;
> phy-names = "usb2-phy";
> power-domains = <&power PX30_PD_USB>;
> @@ -868,7 +899,6 @@
> reg = <0x0 0xff340000 0x0 0x10000>;
> interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&cru HCLK_HOST>;
> - clock-names = "usbhost";
> phys = <&u2phy_host>;
> phy-names = "usb";
> power-domains = <&power PX30_PD_USB>;
> @@ -880,7 +910,6 @@
> reg = <0x0 0xff350000 0x0 0x10000>;
> interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&cru HCLK_HOST>;
> - clock-names = "usbhost";
> phys = <&u2phy_host>;
> phy-names = "usb";
> power-domains = <&power PX30_PD_USB>;
> @@ -910,13 +939,14 @@
> status = "disabled";
> };
>
> - sdmmc: dwmmc@ff370000 {
> + sdmmc: mmc@ff370000 {
> compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
> reg = <0x0 0xff370000 0x0 0x4000>;
> interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
> <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
> - clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
> + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
> + bus-width = <4>;
> fifo-depth = <0x100>;
> max-frequency = <150000000>;
> pinctrl-names = "default";
> @@ -925,13 +955,14 @@
> status = "disabled";
> };
>
> - sdio: dwmmc@ff380000 {
> + sdio: mmc@ff380000 {
> compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
> reg = <0x0 0xff380000 0x0 0x4000>;
> interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
> <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
> - clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
> + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
> + bus-width = <4>;
> fifo-depth = <0x100>;
> max-frequency = <150000000>;
> pinctrl-names = "default";
> @@ -940,13 +971,14 @@
> status = "disabled";
> };
>
> - emmc: dwmmc@ff390000 {
> + emmc: mmc@ff390000 {
> compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
> reg = <0x0 0xff390000 0x0 0x4000>;
> interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
> <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
> - clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
> + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
> + bus-width = <8>;
> fifo-depth = <0x100>;
> max-frequency = <150000000>;
> pinctrl-names = "default";
> @@ -955,18 +987,54 @@
> status = "disabled";
> };
>
> - sfc: sfc@ff3a0000 {
> + sfc: spi@ff3a0000 {
> compatible = "rockchip,sfc";
> reg = <0x0 0xff3a0000 0x0 0x4000>;
> interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
> clock-names = "clk_sfc", "hclk_sfc";
> - pinctrl-names = "default";
> pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus4>;
> + pinctrl-names = "default";
> + power-domains = <&power PX30_PD_MMC_NAND>;
> + status = "disabled";
> + };
> +
> + nfc: nand-controller@ff3b0000 {
> + compatible = "rockchip,px30-nfc";
> + reg = <0x0 0xff3b0000 0x0 0x4000>;
> + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>;
> + clock-names = "ahb", "nfc";
> + assigned-clocks = <&cru SCLK_NANDC>;
> + assigned-clock-rates = <150000000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_cs0
> + &flash_rdn &flash_rdy &flash_wrn &flash_dqs>;
> power-domains = <&power PX30_PD_MMC_NAND>;
> status = "disabled";
> };
>
> + gpu_opp_table: opp-table-1 {
> + compatible = "operating-points-v2";
> +
> + opp-200000000 {
> + opp-hz = /bits/ 64 <200000000>;
> + opp-microvolt = <950000>;
> + };
> + opp-300000000 {
> + opp-hz = /bits/ 64 <300000000>;
> + opp-microvolt = <975000>;
> + };
> + opp-400000000 {
> + opp-hz = /bits/ 64 <400000000>;
> + opp-microvolt = <1050000>;
> + };
> + opp-480000000 {
> + opp-hz = /bits/ 64 <480000000>;
> + opp-microvolt = <1125000>;
> + };
> + };
> +
> gpu: gpu@ff400000 {
> compatible = "rockchip,px30-mali", "arm,mali-bifrost";
> reg = <0x0 0xff400000 0x0 0x4000>;
> @@ -977,9 +1045,32 @@
> clocks = <&cru SCLK_GPU>;
> #cooling-cells = <2>;
> power-domains = <&power PX30_PD_GPU>;
> + operating-points-v2 = <&gpu_opp_table>;
> status = "disabled";
> };
>
> + vpu: video-codec@ff442000 {
> + compatible = "rockchip,px30-vpu";
> + reg = <0x0 0xff442000 0x0 0x800>;
> + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "vepu", "vdpu";
> + clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
> + clock-names = "aclk", "hclk";
> + iommus = <&vpu_mmu>;
> + power-domains = <&power PX30_PD_VPU>;
> + };
> +
> + vpu_mmu: iommu@ff442800 {
> + compatible = "rockchip,iommu";
> + reg = <0x0 0xff442800 0x0 0x100>;
> + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
> + clock-names = "aclk", "iface";
> + #iommu-cells = <0>;
> + power-domains = <&power PX30_PD_VPU>;
> + };
> +
> dsi: dsi@ff450000 {
> compatible = "rockchip,px30-mipi-dsi";
> reg = <0x0 0xff450000 0x0 0x10000>;
> @@ -1029,7 +1120,6 @@
> reset-names = "axi", "ahb", "dclk";
> iommus = <&vopb_mmu>;
> power-domains = <&power PX30_PD_VO>;
> - rockchip,grf = <&grf>;
> status = "disabled";
>
> vopb_out: port {
> @@ -1052,7 +1142,6 @@
> compatible = "rockchip,iommu";
> reg = <0x0 0xff460f00 0x0 0x100>;
> interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "vopb_mmu";
> clocks = <&cru ACLK_VOPB>, <&cru HCLK_VOPB>;
> clock-names = "aclk", "iface";
> power-domains = <&power PX30_PD_VO>;
> @@ -1071,7 +1160,6 @@
> reset-names = "axi", "ahb", "dclk";
> iommus = <&vopl_mmu>;
> power-domains = <&power PX30_PD_VO>;
> - rockchip,grf = <&grf>;
> status = "disabled";
>
> vopl_out: port {
> @@ -1093,8 +1181,7 @@
> vopl_mmu: iommu@ff470f00 {
> compatible = "rockchip,iommu";
> reg = <0x0 0xff470f00 0x0 0x100>;
> - interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "vopl_mmu";
> + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&cru ACLK_VOPL>, <&cru HCLK_VOPL>;
> clock-names = "aclk", "iface";
> power-domains = <&power PX30_PD_VO>;
> @@ -1102,103 +1189,144 @@
> status = "disabled";
> };
>
> + isp: isp@ff4a0000 {
> + compatible = "rockchip,px30-cif-isp"; /*rk3326-rkisp1*/
> + reg = <0x0 0xff4a0000 0x0 0x8000>;
> + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "isp", "mi", "mipi";
> + clocks = <&cru SCLK_ISP>,
> + <&cru ACLK_ISP>,
> + <&cru HCLK_ISP>,
> + <&cru PCLK_ISP>;
> + clock-names = "isp", "aclk", "hclk", "pclk";
> + iommus = <&isp_mmu>;
> + phys = <&csi_dphy>;
> + phy-names = "dphy";
> + power-domains = <&power PX30_PD_VI>;
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> + };
> +
> + isp_mmu: iommu@ff4a8000 {
> + compatible = "rockchip,iommu";
> + reg = <0x0 0xff4a8000 0x0 0x100>;
> + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru ACLK_ISP>, <&cru HCLK_ISP>;
> + clock-names = "aclk", "iface";
> + power-domains = <&power PX30_PD_VI>;
> + rockchip,disable-mmu-reset;
> + #iommu-cells = <0>;
> + };
> +
> qos_gmac: qos@ff518000 {
> - compatible = "syscon";
> + compatible = "rockchip,px30-qos", "syscon";
> reg = <0x0 0xff518000 0x0 0x20>;
> };
>
> qos_gpu: qos@ff520000 {
> - compatible = "syscon";
> + compatible = "rockchip,px30-qos", "syscon";
> reg = <0x0 0xff520000 0x0 0x20>;
> };
>
> qos_sdmmc: qos@ff52c000 {
> - compatible = "syscon";
> + compatible = "rockchip,px30-qos", "syscon";
> reg = <0x0 0xff52c000 0x0 0x20>;
> };
>
> qos_emmc: qos@ff538000 {
> - compatible = "syscon";
> + compatible = "rockchip,px30-qos", "syscon";
> reg = <0x0 0xff538000 0x0 0x20>;
> };
>
> qos_nand: qos@ff538080 {
> - compatible = "syscon";
> + compatible = "rockchip,px30-qos", "syscon";
> reg = <0x0 0xff538080 0x0 0x20>;
> };
>
> qos_sdio: qos@ff538100 {
> - compatible = "syscon";
> + compatible = "rockchip,px30-qos", "syscon";
> reg = <0x0 0xff538100 0x0 0x20>;
> };
>
> qos_sfc: qos@ff538180 {
> - compatible = "syscon";
> + compatible = "rockchip,px30-qos", "syscon";
> reg = <0x0 0xff538180 0x0 0x20>;
> };
>
> qos_usb_host: qos@ff540000 {
> - compatible = "syscon";
> + compatible = "rockchip,px30-qos", "syscon";
> reg = <0x0 0xff540000 0x0 0x20>;
> };
>
> qos_usb_otg: qos@ff540080 {
> - compatible = "syscon";
> + compatible = "rockchip,px30-qos", "syscon";
> reg = <0x0 0xff540080 0x0 0x20>;
> };
>
> qos_isp_128: qos@ff548000 {
> - compatible = "syscon";
> + compatible = "rockchip,px30-qos", "syscon";
> reg = <0x0 0xff548000 0x0 0x20>;
> };
>
> qos_isp_rd: qos@ff548080 {
> - compatible = "syscon";
> + compatible = "rockchip,px30-qos", "syscon";
> reg = <0x0 0xff548080 0x0 0x20>;
> };
>
> qos_isp_wr: qos@ff548100 {
> - compatible = "syscon";
> + compatible = "rockchip,px30-qos", "syscon";
> reg = <0x0 0xff548100 0x0 0x20>;
> };
>
> qos_isp_m1: qos@ff548180 {
> - compatible = "syscon";
> + compatible = "rockchip,px30-qos", "syscon";
> reg = <0x0 0xff548180 0x0 0x20>;
> };
>
> qos_vip: qos@ff548200 {
> - compatible = "syscon";
> + compatible = "rockchip,px30-qos", "syscon";
> reg = <0x0 0xff548200 0x0 0x20>;
> };
>
> qos_rga_rd: qos@ff550000 {
> - compatible = "syscon";
> + compatible = "rockchip,px30-qos", "syscon";
> reg = <0x0 0xff550000 0x0 0x20>;
> };
>
> qos_rga_wr: qos@ff550080 {
> - compatible = "syscon";
> + compatible = "rockchip,px30-qos", "syscon";
> reg = <0x0 0xff550080 0x0 0x20>;
> };
>
> qos_vop_m0: qos@ff550100 {
> - compatible = "syscon";
> + compatible = "rockchip,px30-qos", "syscon";
> reg = <0x0 0xff550100 0x0 0x20>;
> };
>
> qos_vop_m1: qos@ff550180 {
> - compatible = "syscon";
> + compatible = "rockchip,px30-qos", "syscon";
> reg = <0x0 0xff550180 0x0 0x20>;
> };
>
> qos_vpu: qos@ff558000 {
> - compatible = "syscon";
> + compatible = "rockchip,px30-qos", "syscon";
> reg = <0x0 0xff558000 0x0 0x20>;
> };
>
> qos_vpu_r128: qos@ff558080 {
> - compatible = "syscon";
> + compatible = "rockchip,px30-qos", "syscon";
> reg = <0x0 0xff558080 0x0 0x20>;
> };
>
> @@ -1210,7 +1338,7 @@
> #size-cells = <2>;
> ranges;
>
> - gpio0: gpio0@ff040000 {
> + gpio0: gpio@ff040000 {
> compatible = "rockchip,gpio-bank";
> reg = <0x0 0xff040000 0x0 0x100>;
> interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> @@ -1222,7 +1350,7 @@
> #interrupt-cells = <2>;
> };
>
> - gpio1: gpio1@ff250000 {
> + gpio1: gpio@ff250000 {
> compatible = "rockchip,gpio-bank";
> reg = <0x0 0xff250000 0x0 0x100>;
> interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
> @@ -1234,7 +1362,7 @@
> #interrupt-cells = <2>;
> };
>
> - gpio2: gpio2@ff260000 {
> + gpio2: gpio@ff260000 {
> compatible = "rockchip,gpio-bank";
> reg = <0x0 0xff260000 0x0 0x100>;
> interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> @@ -1246,7 +1374,7 @@
> #interrupt-cells = <2>;
> };
>
> - gpio3: gpio3@ff270000 {
> + gpio3: gpio@ff270000 {
> compatible = "rockchip,gpio-bank";
> reg = <0x0 0xff270000 0x0 0x100>;
> interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> @@ -1370,7 +1498,7 @@
> };
>
> tsadc {
> - tsadc_otp_gpio: tsadc-otp-gpio {
> + tsadc_otp_pin: tsadc-otp-pin {
> rockchip,pins =
> <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
> };
> @@ -1933,7 +2061,7 @@
> };
> };
>
> - serial_flash {
> + sfc {
> sfc_bus4: sfc-bus4 {
> rockchip,pins =
> <1 RK_PA0 3 &pcfg_pull_none>,
> diff --git a/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
> index 63d87e16e1..87f277f78e 100644
> --- a/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
> +++ b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
> @@ -82,7 +82,7 @@
> u-boot,dm-pre-reloc;
> };
>
> -&{/sfc@ff3a0000/flash@0} {
> +&{/spi@ff3a0000/flash@0} {
> u-boot,dm-pre-reloc;
> };
>
> diff --git a/arch/arm/dts/rk3326-odroid-go2.dts b/arch/arm/dts/rk3326-odroid-go2.dts
> index 4e3dceecbe..ea0695b51e 100644
> --- a/arch/arm/dts/rk3326-odroid-go2.dts
> +++ b/arch/arm/dts/rk3326-odroid-go2.dts
> @@ -14,14 +14,12 @@
> model = "ODROID-GO Advance";
> compatible = "hardkernel,rk3326-odroid-go2", "rockchip,rk3326";
>
> - chosen {
> - stdout-path = "serial2:115200n8";
> + aliases {
> + mmc0 = &sdmmc;
> };
>
> - backlight: backlight {
> - compatible = "pwm-backlight";
> - power-supply = <&vcc_bl>;
> - pwms = <&pwm1 0 25000 0>;
> + chosen {
> + stdout-path = "serial2:115200n8";
> };
>
> adc-joystick {
> @@ -33,21 +31,27 @@
>
> axis@0 {
> reg = <0>;
> - abs-range = <172 772>;
> - abs-fuzz = <10>;
> abs-flat = <10>;
> + abs-fuzz = <10>;
> + abs-range = <172 772>;
> linux,code = <ABS_X>;
> };
>
> axis@1 {
> reg = <1>;
> - abs-range = <278 815>;
> - abs-fuzz = <10>;
> abs-flat = <10>;
> + abs-fuzz = <10>;
> + abs-range = <278 815>;
> linux,code = <ABS_Y>;
> };
> };
>
> + backlight: backlight {
> + compatible = "pwm-backlight";
> + power-supply = <&vcc_bl>;
> + pwms = <&pwm1 0 25000 0>;
> + };
> +
> gpio-keys {
> compatible = "gpio-keys";
> pinctrl-names = "default";
> @@ -163,25 +167,26 @@
>
> rk817-sound {
> compatible = "simple-audio-card";
> + simple-audio-card,name = "Analog";
> simple-audio-card,format = "i2s";
> - simple-audio-card,name = "rockchip,rk817-codec";
> + simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
> simple-audio-card,mclk-fs = <256>;
> simple-audio-card,widgets =
> "Microphone", "Mic Jack",
> - "Headphone", "Headphone Jack";
> + "Headphone", "Headphones",
> + "Speaker", "Speaker";
> simple-audio-card,routing =
> - "MIC_IN", "Mic Jack",
> - "Headphone Jack", "HPOL",
> - "Headphone Jack", "HPOR";
> - simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>;
> - simple-audio-card,codec-hp-det = <1>;
> + "MICL", "Mic Jack",
> + "Headphones", "HPOL",
> + "Headphones", "HPOR",
> + "Speaker", "SPKO";
>
> - simple-audio-card,cpu {
> - sound-dai = <&i2s1_2ch>;
> + simple-audio-card,codec {
> + sound-dai = <&rk817>;
> };
>
> - simple-audio-card,codec {
> - sound-dai = <&rk817_codec>;
> + simple-audio-card,cpu {
> + sound-dai = <&i2s1_2ch>;
> };
> };
>
> @@ -202,7 +207,8 @@
> gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
> enable-active-high;
> regulator-always-on;
> - vin-supply = <&vccsys>;
> + regulator-boot-on;
> + vin-supply = <&usb_midu>;
> };
> };
>
> @@ -259,6 +265,7 @@
> backlight = <&backlight>;
> iovcc-supply = <&vcc_lcd>;
> reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
> + rotation = <270>;
> vdd-supply = <&vcc_lcd>;
>
> port {
> @@ -289,16 +296,14 @@
> reg = <0x20>;
> interrupt-parent = <&gpio0>;
> interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
> - pinctrl-names = "default", "pmic-sleep",
> - "pmic-power-off", "pmic-reset";
> - pinctrl-0 = <&pmic_int>;
> - pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>;
> - pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>;
> - pinctrl-3 = <&soc_slppin_rst>, <&rk817_slppin_rst>;
> - rockchip,system-power-controller;
> + clock-output-names = "rk808-clkout1", "xin32k";
> + clock-names = "mclk";
> + clocks = <&cru SCLK_I2S1_OUT>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
> wakeup-source;
> #clock-cells = <1>;
> - clock-output-names = "rk808-clkout1", "xin32k";
> + #sound-dai-cells = <0>;
>
> vcc1-supply = <&vccsys>;
> vcc2-supply = <&vccsys>;
> @@ -307,53 +312,7 @@
> vcc5-supply = <&vccsys>;
> vcc6-supply = <&vccsys>;
> vcc7-supply = <&vccsys>;
> -
> - pinctrl_rk8xx: pinctrl_rk8xx {
> - gpio-controller;
> - #gpio-cells = <2>;
> -
> - rk817_ts_gpio1: rk817_ts_gpio1 {
> - pins = "gpio_ts";
> - function = "pin_fun1";
> - /* output-low; */
> - /* input-enable; */
> - };
> -
> - rk817_gt_gpio2: rk817_gt_gpio2 {
> - pins = "gpio_gt";
> - function = "pin_fun1";
> - };
> -
> - rk817_pin_ts: rk817_pin_ts {
> - pins = "gpio_ts";
> - function = "pin_fun0";
> - };
> -
> - rk817_pin_gt: rk817_pin_gt {
> - pins = "gpio_gt";
> - function = "pin_fun0";
> - };
> -
> - rk817_slppin_null: rk817_slppin_null {
> - pins = "gpio_slp";
> - function = "pin_fun0";
> - };
> -
> - rk817_slppin_slp: rk817_slppin_slp {
> - pins = "gpio_slp";
> - function = "pin_fun1";
> - };
> -
> - rk817_slppin_pwrdn: rk817_slppin_pwrdn {
> - pins = "gpio_slp";
> - function = "pin_fun2";
> - };
> -
> - rk817_slppin_rst: rk817_slppin_rst {
> - pins = "gpio_slp";
> - function = "pin_fun3";
> - };
> - };
> + vcc8-supply = <&vccsys>;
>
> regulators {
> vdd_logic: DCDC_REG1 {
> @@ -503,66 +462,18 @@
> regulator-suspend-microvolt = <3000000>;
> };
> };
> - };
>
> - battery {
> - compatible = "rk817,battery";
> - ocv_table = <3500 3625 3685 3697 3718 3735 3748
> - 3760 3774 3788 3802 3816 3834 3853
> - 3877 3908 3946 3975 4018 4071 4106>;
> -
> - /* KPL605475 Battery Spec */
> - /*
> - Capacity : 3.7V 3000mA
> - Normal Voltage = 3.7V
> - Cut-Off Voltage : 3.1V
> - Internal Impedance : 180 mOhm
> - Charging Voltage : 4.2V
> - Charging Voltage Max : 4.25V
> - Sample resister : 10 mohm
> - */
> - design_capacity = <3000>;
> - design_qmax = <3000>;
> - bat_res = <180>;
> - sleep_enter_current = <300>;
> - sleep_exit_current = <300>;
> - sleep_filter_current = <100>;
> - power_off_thresd = <3500>;
> - zero_algorithm_vol = <3700>;
> - max_soc_offset = <60>;
> - monitor_sec = <5>;
> - virtual_power = <0>;
> - sample_res = <10>;
> - };
> -
> - charger {
> - compatible = "rk817,charger";
> - min_input_voltage = <4500>;
> - max_input_current = <1500>;
> - max_chrg_current = <2000>;
> - max_chrg_voltage = <4200>;
> - chrg_term_mode = <0>;
> - chrg_finish_cur = <300>;
> - virtual_power = <0>;
> - sample_res = <10>;
> -
> - /* P.C.B rev0.2 DC Detect & Charger Status LED GPIO */
> - dc_det_gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
> - chg_led_gpio = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
> -
> - extcon = <&u2phy>;
> + usb_midu: BOOST {
> + regulator-name = "usb_midu";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5400000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> };
>
> rk817_codec: codec {
> - #sound-dai-cells = <0>;
> - compatible = "rockchip,rk817-codec";
> - clocks = <&cru SCLK_I2S1_OUT>;
> - clock-names = "mclk";
> - pinctrl-names = "default";
> - pinctrl-0 = <&i2s1_2ch_mclk>;
> - hp-volume = <20>;
> - spk-volume = <3>;
> - status = "okay";
> + rockchip,mic-in-differential;
> };
> };
> };
> @@ -604,7 +515,6 @@
> };
>
> &sdmmc {
> - bus-width = <4>;
> cap-sd-highspeed;
> card-detect-delay = <200>;
> cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/
> diff --git a/configs/px30-core-ctouch2-px30_defconfig b/configs/px30-core-ctouch2-px30_defconfig
> index a5dbbd7453..7d1920458e 100644
> --- a/configs/px30-core-ctouch2-px30_defconfig
> +++ b/configs/px30-core-ctouch2-px30_defconfig
> @@ -6,7 +6,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
> CONFIG_SPL_LIBCOMMON_SUPPORT=y
> CONFIG_SPL_LIBGENERIC_SUPPORT=y
> CONFIG_NR_DRAM_BANKS=1
> -CONFIG_DEFAULT_DEVICE_TREE="px30-px30-core-ctouch2"
> +CONFIG_DEFAULT_DEVICE_TREE="px30-engicam-px30-core-ctouch2"
> CONFIG_SPL_TEXT_BASE=0x00000000
> CONFIG_ROCKCHIP_PX30=y
> CONFIG_TARGET_PX30_CORE=y
> @@ -23,7 +23,7 @@ CONFIG_SYS_LOAD_ADDR=0x800800
> CONFIG_FIT=y
> CONFIG_FIT_VERBOSE=y
> CONFIG_SPL_LOAD_FIT=y
> -CONFIG_DEFAULT_FDT_FILE="rockchip/px30-px30-core-ctouch2.dtb"
> +CONFIG_DEFAULT_FDT_FILE="rockchip/px30-engicam-px30-core-ctouch2.dtb"
> # CONFIG_CONSOLE_MUX is not set
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_DISPLAY_BOARDINFO_LATE=y
> diff --git a/configs/px30-core-edimm2.2-px30_defconfig b/configs/px30-core-edimm2.2-px30_defconfig
> index 1e138d63ed..84c57337ce 100644
> --- a/configs/px30-core-edimm2.2-px30_defconfig
> +++ b/configs/px30-core-edimm2.2-px30_defconfig
> @@ -6,7 +6,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
> CONFIG_SPL_LIBCOMMON_SUPPORT=y
> CONFIG_SPL_LIBGENERIC_SUPPORT=y
> CONFIG_NR_DRAM_BANKS=1
> -CONFIG_DEFAULT_DEVICE_TREE="px30-px30-core-edimm2.2"
> +CONFIG_DEFAULT_DEVICE_TREE="px30-engicam-px30-core-edimm2.2"
> CONFIG_SPL_TEXT_BASE=0x00000000
> CONFIG_ROCKCHIP_PX30=y
> CONFIG_TARGET_PX30_CORE=y
> @@ -23,7 +23,7 @@ CONFIG_SYS_LOAD_ADDR=0x800800
> CONFIG_FIT=y
> CONFIG_FIT_VERBOSE=y
> CONFIG_SPL_LOAD_FIT=y
> -CONFIG_DEFAULT_FDT_FILE="rockchip/px30-px30-core-edimm2.2.dtb"
> +CONFIG_DEFAULT_FDT_FILE="rockchip/px30-engicam-px30-core-edimm2.2.dtb"
> # CONFIG_CONSOLE_MUX is not set
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_DISPLAY_BOARDINFO_LATE=y
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2 3/3] engicam: px30: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF
2021-11-15 17:38 ` [PATCH v2 3/3] engicam: px30: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF Jagan Teki
@ 2021-12-24 6:55 ` Kever Yang
0 siblings, 0 replies; 8+ messages in thread
From: Kever Yang @ 2021-12-24 6:55 UTC (permalink / raw)
To: Jagan Teki; +Cc: u-boot, linux-amarula
On 2021/11/16 上午1:38, Jagan Teki wrote:
> PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
>
> C.TOUCH 2.0 is a general purpose carrier board with capacitive
> touch interface support.
>
> 10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.
>
> PX30.Core needs to mount on top of C.TOUCH 2.0 carrier with pluged
> 10.1" OF for creating complete PX30.Core C.TOUCH 2.0 10.1" Open Frame.
>
> Add support for it.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Thanks,
- Kever
> ---
> Changes for v2:
> - none
>
> arch/arm/dts/Makefile | 1 +
> arch/arm/mach-rockchip/px30/Kconfig | 8 ++
> board/engicam/px30_core/MAINTAINERS | 6 +
> configs/px30-core-ctouch2-of10-px30_defconfig | 108 ++++++++++++++++++
> 4 files changed, 123 insertions(+)
> create mode 100644 configs/px30-core-ctouch2-of10-px30_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 57a33d0bc4..95465d1dac 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -79,6 +79,7 @@ dtb-$(CONFIG_ROCKCHIP_PX30) += \
> px30-evb.dtb \
> px30-firefly.dtb \
> px30-engicam-px30-core-ctouch2.dtb \
> + px30-engicam-px30-core-ctouch2-of10.dtb \
> px30-engicam-px30-core-edimm2.2.dtb \
> rk3326-odroid-go2.dtb
>
> diff --git a/arch/arm/mach-rockchip/px30/Kconfig b/arch/arm/mach-rockchip/px30/Kconfig
> index aa5cc471ee..145bf3591f 100644
> --- a/arch/arm/mach-rockchip/px30/Kconfig
> +++ b/arch/arm/mach-rockchip/px30/Kconfig
> @@ -27,6 +27,14 @@ config TARGET_PX30_CORE
> * PX30.Core needs to mount on top of CTOUCH2.0 for creating complete
> PX30.Core C.TOUCH Carrier board.
>
> + PX30.Core CTOUCH2-OF10:
> + * PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
> + * CTOUCH2.0 is a general purpose Carrier board with capacitive
> + touch interface support.
> + * 10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.
> + * PX30.Core needs to mount on top of C.TOUCH 2.0 carrier with pluged
> + 10.1" OF for creating complete PX30.Core C.TOUCH 2.0 10.1" Open Frame.
> +
> config ROCKCHIP_BOOT_MODE_REG
> default 0xff010200
>
> diff --git a/board/engicam/px30_core/MAINTAINERS b/board/engicam/px30_core/MAINTAINERS
> index b87ca22207..77f0c2dba5 100644
> --- a/board/engicam/px30_core/MAINTAINERS
> +++ b/board/engicam/px30_core/MAINTAINERS
> @@ -4,6 +4,12 @@ M: Suniel Mahesh <sunil@amarulasolutions.com>
> S: Maintained
> F: configs/px30-core-ctouch2-px30_defconfig
>
> +PX30-Core-CTOUCH2.0-OF10
> +M: Jagan Teki <jagan@amarulasolutions.com>
> +M: Suniel Mahesh <sunil@amarulasolutions.com>
> +S: Maintained
> +F: configs/px30-core-ctouch2-of10-px30_defconfig
> +
> PX30-Core-EDIMM2.2
> M: Jagan Teki <jagan@amarulasolutions.com>
> M: Suniel Mahesh <sunil@amarulasolutions.com>
> diff --git a/configs/px30-core-ctouch2-of10-px30_defconfig b/configs/px30-core-ctouch2-of10-px30_defconfig
> new file mode 100644
> index 0000000000..664c9774eb
> --- /dev/null
> +++ b/configs/px30-core-ctouch2-of10-px30_defconfig
> @@ -0,0 +1,108 @@
> +CONFIG_ARM=y
> +CONFIG_SKIP_LOWLEVEL_INIT=y
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_SYS_MALLOC_F_LEN=0x2000
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_DEFAULT_DEVICE_TREE="px30-engicam-px30-core-ctouch2-of10"
> +CONFIG_SPL_TEXT_BASE=0x00000000
> +CONFIG_ROCKCHIP_PX30=y
> +CONFIG_TARGET_PX30_CORE=y
> +CONFIG_DEBUG_UART_CHANNEL=1
> +CONFIG_TPL_LIBGENERIC_SUPPORT=y
> +CONFIG_SPL_DRIVERS_MISC=y
> +CONFIG_SPL_STACK_R_ADDR=0x600000
> +CONFIG_DEBUG_UART_BASE=0xFF160000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_DEBUG_UART=y
> +CONFIG_TPL_SYS_MALLOC_F_LEN=0x600
> +CONFIG_SYS_LOAD_ADDR=0x800800
> +# CONFIG_ANDROID_BOOT_IMAGE is not set
> +CONFIG_FIT=y
> +CONFIG_FIT_VERBOSE=y
> +CONFIG_SPL_LOAD_FIT=y
> +CONFIG_DEFAULT_FDT_FILE="rockchip/px30-engicam-px30-core-ctouch2-of10.dtb"
> +# CONFIG_CONSOLE_MUX is not set
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_MISC_INIT_R=y
> +CONFIG_SPL_BOOTROM_SUPPORT=y
> +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> +CONFIG_SPL_STACK_R=y
> +# CONFIG_TPL_BANNER_PRINT is not set
> +CONFIG_SPL_ATF=y
> +# CONFIG_TPL_FRAMEWORK is not set
> +# CONFIG_CMD_BOOTD is not set
> +# CONFIG_CMD_ELF is not set
> +# CONFIG_CMD_IMI is not set
> +# CONFIG_CMD_XIMG is not set
> +# CONFIG_CMD_LZMADEC is not set
> +# CONFIG_CMD_UNZIP is not set
> +CONFIG_CMD_GPT=y
> +# CONFIG_CMD_LOADB is not set
> +# CONFIG_CMD_LOADS is not set
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_USB=y
> +CONFIG_CMD_USB_MASS_STORAGE=y
> +# CONFIG_CMD_ITEST is not set
> +# CONFIG_CMD_SETEXPR is not set
> +# CONFIG_SPL_DOS_PARTITION is not set
> +# CONFIG_ISO_PARTITION is not set
> +CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_OF_LIVE=y
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_REGMAP=y
> +CONFIG_SPL_REGMAP=y
> +CONFIG_SYSCON=y
> +CONFIG_SPL_SYSCON=y
> +CONFIG_CLK=y
> +CONFIG_SPL_CLK=y
> +CONFIG_FASTBOOT_BUF_ADDR=0x800800
> +CONFIG_FASTBOOT_BUF_SIZE=0x04000000
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_MISC=y
> +CONFIG_ROCKCHIP_OTP=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_PHY_REALTEK=y
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PINCTRL=y
> +CONFIG_DM_PMIC=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_REGULATOR_PWM=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_RAM=y
> +CONFIG_SPL_RAM=y
> +CONFIG_TPL_RAM=y
> +CONFIG_ROCKCHIP_SDRAM_COMMON=y
> +CONFIG_DM_RESET=y
> +CONFIG_DM_RNG=y
> +CONFIG_RNG_ROCKCHIP=y
> +# CONFIG_SPECIFY_CONSOLE_INDEX is not set
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_DEBUG_UART_SKIP_INIT=y
> +CONFIG_SOUND=y
> +CONFIG_SYSRESET=y
> +CONFIG_DM_THERMAL=y
> +CONFIG_USB=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_DWC2_OTG=y
> +CONFIG_DM_VIDEO=y
> +CONFIG_DISPLAY=y
> +CONFIG_LCD=y
> +CONFIG_SPL_TINY_MEMSET=y
> +CONFIG_TPL_TINY_MEMSET=y
> +CONFIG_LZO=y
> +CONFIG_ERRNO_STR=y
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2021-12-24 6:55 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-11-15 17:38 [PATCH v2 1/3] arm64: dts: rockchip: px30: Move dmc into -u-boot.dtsi Jagan Teki
2021-11-15 17:38 ` [PATCH v2 2/3] arm64: dts: rockchip: Sync px30 from linux-next Jagan Teki
2021-12-24 6:55 ` Kever Yang
2021-11-15 17:38 ` [PATCH v2 3/3] engicam: px30: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF Jagan Teki
2021-12-24 6:55 ` Kever Yang
2021-12-08 5:20 ` [PATCH v2 1/3] arm64: dts: rockchip: px30: Move dmc into -u-boot.dtsi Jagan Teki
2021-12-23 13:27 ` Jagan Teki
2021-12-24 6:54 ` Kever Yang
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.