On Mon, Nov 22, 2021 at 12:22:19PM +0530, Jagan Teki wrote:
> Some display panels would come up with a non-DSI output, those
> can have an option to connect the DSI host by means of interface
> bridge converter.
> 
> This DSI to non-DSI interface bridge converter would requires
> DSI Host to handle drm bridge functionalities in order to DSI
> Host to Interface bridge.

In order to do this you would need to use the DRM bridge API...

> This patch convert the existing to a drm bridge driver with a
> built-in encoder support for compatibility with existing
> component drivers.

... but changing the encoder driver to a bridge is completely
unnecessary to do so. Why did you need to make that change?

> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
>
> ---
> Changes for v5:
> - add atomic APIs
> - find host and device variant DSI devices.
> Changes for v4, v3:
> - none
> 
>  drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 112 ++++++++++++++++++++-----
>  drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h |   7 ++
>  2 files changed, 96 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> index 43d9c9e5198d..a6a272b55f77 100644
> --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> @@ -21,6 +21,7 @@
>  
>  #include <drm/drm_atomic_helper.h>
>  #include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_of.h>
>  #include <drm/drm_panel.h>
>  #include <drm/drm_print.h>
>  #include <drm/drm_probe_helper.h>
> @@ -713,10 +714,11 @@ static int sun6i_dsi_start(struct sun6i_dsi *dsi,
>  	return 0;
>  }
>  
> -static void sun6i_dsi_encoder_enable(struct drm_encoder *encoder)
> +static void sun6i_dsi_bridge_atomic_enable(struct drm_bridge *bridge,
> +					   struct drm_bridge_state *old_bridge_state)
>  {
> -	struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
> -	struct sun6i_dsi *dsi = encoder_to_sun6i_dsi(encoder);
> +	struct sun6i_dsi *dsi = bridge_to_sun6i_dsi(bridge);
> +	struct drm_display_mode *mode = &bridge->encoder->crtc->state->adjusted_mode;
>  	struct mipi_dsi_device *device = dsi->device;
>  	union phy_configure_opts opts = { };
>  	struct phy_configure_opts_mipi_dphy *cfg = &opts.mipi_dphy;
> @@ -772,6 +774,9 @@ static void sun6i_dsi_encoder_enable(struct drm_encoder *encoder)
>  	if (dsi->panel)
>  		drm_panel_prepare(dsi->panel);
>  
> +	if (dsi->next_bridge)
> +		dsi->next_bridge->funcs->atomic_pre_enable(dsi->next_bridge, old_bridge_state);
> +

Please use the proper helpers.

>  	/*
>  	 * FIXME: This should be moved after the switch to HS mode.
>  	 *
> @@ -787,6 +792,9 @@ static void sun6i_dsi_encoder_enable(struct drm_encoder *encoder)
>  	if (dsi->panel)
>  		drm_panel_enable(dsi->panel);
>  
> +	if (dsi->next_bridge)
> +		dsi->next_bridge->funcs->atomic_enable(dsi->next_bridge, old_bridge_state);
> +

Ditto

>  	sun6i_dsi_start(dsi, DSI_START_HSC);
>  
>  	udelay(1000);
> @@ -794,15 +802,19 @@ static void sun6i_dsi_encoder_enable(struct drm_encoder *encoder)
>  	sun6i_dsi_start(dsi, DSI_START_HSD);
>  }
>  
> -static void sun6i_dsi_encoder_disable(struct drm_encoder *encoder)
> +static void sun6i_dsi_bridge_atomic_disable(struct drm_bridge *bridge,
> +					    struct drm_bridge_state *old_bridge_state)
>  {
> -	struct sun6i_dsi *dsi = encoder_to_sun6i_dsi(encoder);
> +	struct sun6i_dsi *dsi = bridge_to_sun6i_dsi(bridge);
>  
>  	DRM_DEBUG_DRIVER("Disabling DSI output\n");
>  
>  	if (dsi->panel) {
>  		drm_panel_disable(dsi->panel);
>  		drm_panel_unprepare(dsi->panel);
> +	} else if (dsi->next_bridge) {
> +		dsi->next_bridge->funcs->atomic_disable(dsi->next_bridge, old_bridge_state);
> +		dsi->next_bridge->funcs->atomic_post_disable(dsi->next_bridge, old_bridge_state);

Ditto

>  	}
>  
>  	phy_power_off(dsi->dphy);
> @@ -842,9 +854,25 @@ static const struct drm_connector_funcs sun6i_dsi_connector_funcs = {
>  	.atomic_destroy_state	= drm_atomic_helper_connector_destroy_state,
>  };
>  
> -static const struct drm_encoder_helper_funcs sun6i_dsi_enc_helper_funcs = {
> -	.disable	= sun6i_dsi_encoder_disable,
> -	.enable		= sun6i_dsi_encoder_enable,
> +static int sun6i_dsi_bridge_attach(struct drm_bridge *bridge,
> +				   enum drm_bridge_attach_flags flags)
> +{
> +	struct sun6i_dsi *dsi = bridge_to_sun6i_dsi(bridge);
> +
> +	if (dsi->next_bridge)
> +		return drm_bridge_attach(bridge->encoder, dsi->next_bridge,
> +					 NULL, 0);
> +
> +	return 0;
> +}
> +
> +static const struct drm_bridge_funcs sun6i_dsi_bridge_funcs = {
> +	.atomic_duplicate_state	= drm_atomic_helper_bridge_duplicate_state,
> +	.atomic_destroy_state	= drm_atomic_helper_bridge_destroy_state,
> +	.atomic_reset		= drm_atomic_helper_bridge_reset,
> +	.atomic_enable		= sun6i_dsi_bridge_atomic_enable,
> +	.atomic_disable		= sun6i_dsi_bridge_atomic_disable,
> +	.attach			= sun6i_dsi_bridge_attach,
>  };
>  
>  static u32 sun6i_dsi_dcs_build_pkt_hdr(struct sun6i_dsi *dsi,
> @@ -966,8 +994,6 @@ static int sun6i_dsi_bind(struct device *dev, struct device *master,
>  	struct sun6i_dsi *dsi = dev_get_drvdata(dev);
>  	int ret;
>  
> -	drm_encoder_helper_add(&dsi->encoder,
> -			       &sun6i_dsi_enc_helper_funcs);
>  	ret = drm_simple_encoder_init(drm, &dsi->encoder,
>  				      DRM_MODE_ENCODER_DSI);
>  	if (ret) {
> @@ -976,18 +1002,26 @@ static int sun6i_dsi_bind(struct device *dev, struct device *master,
>  	}
>  	dsi->encoder.possible_crtcs = BIT(0);
>  
> -	drm_connector_helper_add(&dsi->connector,
> -				 &sun6i_dsi_connector_helper_funcs);
> -	ret = drm_connector_init(drm, &dsi->connector,
> -				 &sun6i_dsi_connector_funcs,
> -				 DRM_MODE_CONNECTOR_DSI);
> +	ret = drm_bridge_attach(&dsi->encoder, &dsi->bridge, NULL, 0);
>  	if (ret) {
> -		dev_err(dsi->dev,
> -			"Couldn't initialise the DSI connector\n");
> +		dev_err(dsi->dev, "Couldn't attach drm bridge\n");
>  		goto err_cleanup_connector;
>  	}
>  
> -	drm_connector_attach_encoder(&dsi->connector, &dsi->encoder);
> +	if (dsi->panel) {
> +		drm_connector_helper_add(&dsi->connector,
> +					 &sun6i_dsi_connector_helper_funcs);
> +		ret = drm_connector_init(drm, &dsi->connector,
> +					 &sun6i_dsi_connector_funcs,
> +					 DRM_MODE_CONNECTOR_DSI);
> +		if (ret) {
> +			dev_err(dsi->dev,
> +				"Couldn't initialise the DSI connector\n");
> +			goto err_cleanup_connector;
> +		}
> +
> +		drm_connector_attach_encoder(&dsi->connector, &dsi->encoder);
> +	}
>  
>  	return 0;
>  
> @@ -1013,16 +1047,46 @@ static int sun6i_dsi_attach(struct mipi_dsi_host *host,
>  			    struct mipi_dsi_device *device)
>  {
>  	struct sun6i_dsi *dsi = host_to_sun6i_dsi(host);
> -	struct drm_panel *panel = of_drm_find_panel(device->dev.of_node);
> +	struct device_node *remote = device->dev.of_node;
>  	int ret;
>  
> -	if (IS_ERR(panel))
> -		return PTR_ERR(panel);
> +	if (!of_device_is_available(remote)) {
> +		/**
> +		 * I2C interfaced DSI bridges will register DSI host on the
> +		 * bridge drivers instead of conventional device.
> +		 *
> +		 * Those are probed via host of_node instead of device of_node.
> +		 */

I have no idea what you mean here. Can you expand on what issue you've
tried to solve here?

> +		remote = of_graph_get_remote_node(host->dev->of_node, 0, 0);
> +		if (!remote)
> +			return -ENODEV;
> +	}
> +
> +	dsi->panel = of_drm_find_panel(remote);
> +	if (IS_ERR(dsi->panel)) {
> +		dsi->panel = NULL;
> +
> +		dsi->next_bridge = of_drm_find_bridge(remote);
> +		if (IS_ERR(dsi->next_bridge)) {
> +			dev_err(dsi->dev, "failed to find bridge\n");
> +			return PTR_ERR(dsi->next_bridge);
> +		}
> +	} else {
> +		dsi->next_bridge = NULL;
> +	}
> +
> +	of_node_put(remote);

Using devm_drm_of_get_bridge would greatly simplify the driver

Maxime