[PATCH 1/2] dt-bindings: arm: fsl: Add Y Soft IOTA Crux/Crux+ boards

[PATCH 1/2] dt-bindings: arm: fsl: Add Y Soft IOTA Crux/Crux+ boards

[Michal Vokáč]

Add devicetree binding for Crux/Crux+ boards from the IOTA family.
These boards have the very same HW configuration as the Orion board
except the usage of Quad/QuadPlus SoC.

Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
---
 Documentation/devicetree/bindings/arm/fsl.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 0b595b26061f..d68e8e23703e 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -240,6 +240,7 @@ properties:
               - uniwest,imx6q-evi         # Uniwest Evi
               - variscite,dt6customboard
               - wand,imx6q-wandboard      # Wandboard i.MX6 Quad Board
+              - ysoft,imx6q-yapp4-crux    # i.MX6 Quad Y Soft IOTA Crux board
               - zealz,imx6q-gk802         # Zealz GK802
               - zii,imx6q-zii-rdu2        # ZII RDU2 Board
           - const: fsl,imx6q
@@ -334,6 +335,7 @@ properties:
               - kvg,vicutp                # Kverneland UT1P board
               - prt,prtwd3                # Protonic WD3 board
               - wand,imx6qp-wandboard     # Wandboard i.MX6 QuadPlus Board
+              - ysoft,imx6qp-yapp4-crux-plus  # i.MX6 Quad Plus Y Soft IOTA Crux+ board
               - zii,imx6qp-zii-rdu2       # ZII RDU2+ Board
           - const: fsl,imx6qp
 
-- 
2.25.1

[PATCH 2/2] ARM: dts: imx6dl-yapp4: Add Y Soft IOTA Crux/Crux+ board

[Michal Vokáč]

Add devicetrees for the new boards in the Y Soft IOTA family.
These boards are based on Orion but use Quad/QuadPlus SoC
instead of DualLite.

Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
---
 arch/arm/boot/dts/Makefile                   |  2 +
 arch/arm/boot/dts/imx6q-yapp4-crux.dts       | 76 ++++++++++++++++++++
 arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts | 76 ++++++++++++++++++++
 3 files changed, 154 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6q-yapp4-crux.dts
 create mode 100644 arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 0de64f237cd8..94c64551a970 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -628,6 +628,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-wandboard.dtb \
 	imx6q-wandboard-revb1.dtb \
 	imx6q-wandboard-revd1.dtb \
+	imx6q-yapp4-crux.dtb \
 	imx6q-zii-rdu2.dtb \
 	imx6qp-nitrogen6_max.dtb \
 	imx6qp-nitrogen6_som2.dtb \
@@ -641,6 +642,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6qp-tx6qp-8137-mb7.dtb \
 	imx6qp-vicutp.dtb \
 	imx6qp-wandboard-revd1.dtb \
+	imx6qp-yapp4-crux-plus.dtb \
 	imx6qp-zii-rdu2.dtb \
 	imx6s-dhcom-drc02.dtb
 dtb-$(CONFIG_SOC_IMX6SL) += \
diff --git a/arch/arm/boot/dts/imx6q-yapp4-crux.dts b/arch/arm/boot/dts/imx6q-yapp4-crux.dts
new file mode 100644
index 000000000000..deb18c57cf18
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-yapp4-crux.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6dl-yapp4-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Crux i.MX6Quad board";
+	compatible = "ysoft,imx6q-yapp4-crux", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xf0000000>;
+	};
+};
+
+&audmux {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&gpio_oled {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&oled_1305 {
+	status = "okay";
+};
+
+&oled_1309 {
+	status = "okay";
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&sound {
+	audio-routing =
+		   "Ext Spk", "LSOUT";
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&touchkeys {
+	status = "okay";
+};
+
+&uart2 {
+	status = "disabled";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts b/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts
new file mode 100644
index 000000000000..a450a77f920f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6dl-yapp4-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Crux+ i.MX6QuadPlus board";
+	compatible = "ysoft,imx6qp-yapp4-crux-plus", "fsl,imx6qp";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xf0000000>;
+	};
+};
+
+&audmux {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&gpio_oled {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&oled_1305 {
+	status = "okay";
+};
+
+&oled_1309 {
+	status = "okay";
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&sound {
+	audio-routing =
+		   "Ext Spk", "LSOUT";
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&touchkeys {
+	status = "okay";
+};
+
+&uart2 {
+	status = "disabled";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
-- 
2.25.1

Re: [PATCH 1/2] dt-bindings: arm: fsl: Add Y Soft IOTA Crux/Crux+ boards

[Rob Herring]

On Mon, 22 Nov 2021 17:25:19 +0100, Michal Vokáč wrote:
> Add devicetree binding for Crux/Crux+ boards from the IOTA family.
> These boards have the very same HW configuration as the Orion board
> except the usage of Quad/QuadPlus SoC.
> 
> Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
> ---
>  Documentation/devicetree/bindings/arm/fsl.yaml | 2 ++
>  1 file changed, 2 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH 1/2] dt-bindings: arm: fsl: Add Y Soft IOTA Crux/Crux+ boards

[Shawn Guo]

On Mon, Nov 22, 2021 at 05:25:19PM +0100, Michal Vokáč wrote:
> Add devicetree binding for Crux/Crux+ boards from the IOTA family.
> These boards have the very same HW configuration as the Orion board
> except the usage of Quad/QuadPlus SoC.
> 
> Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>

Applied both, thanks!