From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 4D733C433F5 for ; Tue, 23 Nov 2021 11:09:39 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233564AbhKWLMq (ORCPT ); Tue, 23 Nov 2021 06:12:46 -0500 Received: from frasgout.his.huawei.com ([185.176.79.56]:4154 "EHLO frasgout.his.huawei.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234555AbhKWLMq (ORCPT ); Tue, 23 Nov 2021 06:12:46 -0500 Received: from fraeml743-chm.china.huawei.com (unknown [172.18.147.207]) by frasgout.his.huawei.com (SkyGuard) with ESMTP id 4Hz1bS3nttz67wvf; Tue, 23 Nov 2021 19:08:36 +0800 (CST) Received: from lhreml710-chm.china.huawei.com (10.201.108.61) by fraeml743-chm.china.huawei.com (10.206.15.224) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2308.20; Tue, 23 Nov 2021 12:09:36 +0100 Received: from localhost (10.202.226.41) by lhreml710-chm.china.huawei.com (10.201.108.61) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2308.20; Tue, 23 Nov 2021 11:09:35 +0000 Date: Tue, 23 Nov 2021 11:09:34 +0000 From: Jonathan Cameron To: Ben Widawsky CC: , , "Alison Schofield" , Dan Williams , Ira Weiny , Vishal Verma Subject: Re: [PATCH 18/23] cxl/pci: Implement wait for media active Message-ID: <20211123110934.000070a2@Huawei.com> In-Reply-To: <20211122225751.bofqtswxree74n7f@intel.com> References: <20211120000250.1663391-1-ben.widawsky@intel.com> <20211120000250.1663391-19-ben.widawsky@intel.com> <20211122170335.0000563c@Huawei.com> <20211122225751.bofqtswxree74n7f@intel.com> Organization: Huawei Technologies Research and Development (UK) Ltd. X-Mailer: Claws Mail 4.0.0 (GTK+ 3.24.29; i686-w64-mingw32) MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-Originating-IP: [10.202.226.41] X-ClientProxiedBy: lhreml744-chm.china.huawei.com (10.201.108.194) To lhreml710-chm.china.huawei.com (10.201.108.61) X-CFilter-Loop: Reflected Precedence: bulk List-ID: X-Mailing-List: linux-cxl@vger.kernel.org On Mon, 22 Nov 2021 14:57:51 -0800 Ben Widawsky wrote: > On 21-11-22 17:03:35, Jonathan Cameron wrote: > > On Fri, 19 Nov 2021 16:02:45 -0800 > > Ben Widawsky wrote: > > > > > CXL 2.0 8.1.3.8.2 defines "Memory_Active: When set, indicates that the > > > CXL Range 1 memory is fully initialized and available for software use. > > > Must be set within Range 1. Memory_Active_Timeout of deassertion of > > > > Range 1? > > > > Not my numbering... It's the first DVSEC range. Ah, got it. Maybe Range 1: Memory Active timeout ? > > > > reset to CXL device if CXL.mem HwInit Mode=1" The CXL* Type 3 Memory > > > Device Software Guide (Revision 1.0) further describes the need to check > > > this bit before using HDM. > > > > > > Unfortunately, Memory_Active can take quite a long time depending on > > > media size (up to 256s per 2.0 spec). Since the cxl_pci driver doesn't > > > care about this, a callback is exported as part of driver state for use > > > by drivers that do care. > > > > > > Signed-off-by: Ben Widawsky > > > > Same thing about size not being used... > > > > Yep, got it. > > > > --- > > > This patch did not exist in RFCv2 > > > --- > > > drivers/cxl/cxlmem.h | 1 + > > > drivers/cxl/pci.c | 56 ++++++++++++++++++++++++++++++++++++++++++++ > > > 2 files changed, 57 insertions(+) > > > > > > diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h > > > index eac5528ccaae..a9424dd4e5c3 100644 > > > --- a/drivers/cxl/cxlmem.h > > > +++ b/drivers/cxl/cxlmem.h > > > @@ -167,6 +167,7 @@ struct cxl_dev_state { > > > struct cxl_endpoint_dvsec_info *info; > > > > > > int (*mbox_send)(struct cxl_dev_state *cxlds, struct cxl_mbox_cmd *cmd); > > > + int (*wait_media_ready)(struct cxl_dev_state *cxlds); > > > }; > > > > > > enum cxl_opcode { > > > diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c > > > index b3f46045bf3e..f1a68bfe5f77 100644 > > > --- a/drivers/cxl/pci.c > > > +++ b/drivers/cxl/pci.c > > > @@ -496,6 +496,60 @@ static int wait_for_valid(struct cxl_dev_state *cxlds) > > > return valid ? 0 : -ETIMEDOUT; > > > } > > > > > > +/* > > > + * Implements Figure 43 of the CXL Type 3 Memory Device Software Guide. Waits a > > > + * full 256s no matter what the device reports. > > > + */ > > > +static int wait_for_media_ready(struct cxl_dev_state *cxlds) > > > +{ > > > + const unsigned long timeout = jiffies + (256 * HZ); > > > + struct pci_dev *pdev = to_pci_dev(cxlds->dev); > > > + u64 md_status; > > > + bool active; > > > + int rc; > > > + > > > + rc = wait_for_valid(cxlds); > > > + if (rc) > > > + return rc; > > > + > > > + do { > > > + u64 size; > > > + u32 temp; > > > + int rc; > > > + > > > + rc = pci_read_config_dword(pdev, CDPDR(cxlds, 0, SIZE, HIGH), > > > + &temp); > > > + if (rc) > > > + return -ENXIO; > > > + size = (u64)temp << 32; > > > + > > > + rc = pci_read_config_dword(pdev, CDPDR(cxlds, 0, SIZE, LOW), > > > + &temp); > > > + if (rc) > > > + return -ENXIO; > > > + size |= temp & CXL_DVSEC_PCIE_DEVICE_MEM_SIZE_LOW_MASK; > > > + > > > + active = FIELD_GET(CXL_DVSEC_PCIE_DEVICE_MEM_ACTIVE, temp); > > > > Only need to read the register to get active for this particular functionality. > > > > > + if (active) > > > + break; > > > + cpu_relax(); > > > + mdelay(100); > > > + } while (!time_after(jiffies, timeout)); > > > + > > > + if (!active) > > > + return -ETIMEDOUT; > > > + > > > + rc = check_device_status(cxlds); > > > + if (rc) > > > + return rc; > > > + > > > + md_status = readq(cxlds->regs.memdev + CXLMDEV_STATUS_OFFSET); > > > + if (!CXLMDEV_READY(md_status)) > > > + return -EIO; > > > + > > > + return 0; > > > +} > > > + > > > static struct cxl_endpoint_dvsec_info *dvsec_ranges(struct cxl_dev_state *cxlds) > > > { > > > struct pci_dev *pdev = to_pci_dev(cxlds->dev); > > > @@ -598,6 +652,8 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) > > > if (!cxlds->device_dvsec) > > > dev_warn(&pdev->dev, > > > "Device DVSEC not present. Expect limited functionality.\n"); > > > + else > > > + cxlds->wait_media_ready = wait_for_media_ready; > > > > > > rc = cxl_setup_regs(pdev, CXL_REGLOC_RBI_MEMDEV, &map); > > > if (rc) > >