All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vinod Koul <vkoul@kernel.org>
To: unlisted-recipients:; (no To-header on input)
Cc: linux-arm-msm@vger.kernel.org,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Vinod Koul <vkoul@kernel.org>
Subject: [PATCH 08/15] arm64: dts: qcom: sm8450: add ufs nodes
Date: Wed,  1 Dec 2021 12:59:08 +0530	[thread overview]
Message-ID: <20211201072915.3969178-9-vkoul@kernel.org> (raw)
In-Reply-To: <20211201072915.3969178-1-vkoul@kernel.org>

Add the UFS and QMP PHY node for SM8450 SoC

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 72 ++++++++++++++++++++++++++++
 1 file changed, 72 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 53a6f2275621..75827bbfb3ad 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -816,6 +816,78 @@ rpmhcc: clock-controller {
 				clocks = <&xo_board>;
 			};
 		};
+
+		ufs_mem_hc: ufshc@1d84000 {
+			compatible = "qcom,sm8450-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			iommus = <&apps_smmu 0xe0 0x0>;
+
+			clock-names =
+				"core_clk",
+				"bus_aggr_clk",
+				"iface_clk",
+				"core_clk_unipro",
+				"ref_clk",
+				"tx_lane0_sync_clk",
+				"rx_lane0_sync_clk",
+				"rx_lane1_sync_clk";
+			clocks =
+				<&gcc GCC_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_UFS_PHY_AHB_CLK>,
+				<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				<&rpmhcc RPMH_CXO_CLK>,
+				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			freq-table-hz =
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<75000000 300000000>,
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>;
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sm8450-qmp-ufs-phy";
+			reg = <0 0x01d87000 0 0xe10>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clock-names = "ref", "ref_aux", "qref";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_0_CLKREF_EN>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			status = "disabled";
+
+			ufs_mem_phy_lanes: lanes@1d87400 {
+				reg = <0 0x01d87400 0 0x108>,
+				      <0 0x01d87600 0 0x1e0>,
+				      <0 0x01d87c00 0 0x1dc>,
+				      <0 0x01d87800 0 0x108>,
+				      <0 0x01d87a00 0 0x1e0>;
+				#phy-cells = <0>;
+				#clock-cells = <0>;
+			};
+		};
 	};
 
 	timer {
-- 
2.31.1


  parent reply	other threads:[~2021-12-01  7:29 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-01  7:29 [PATCH 00/15] arm64: dts: qcom: Add support for SM8450 SoC and QRD board Vinod Koul
2021-12-01  7:29 ` [PATCH 01/15] arm64: dts: qcom: Add base SM8450 DTSI Vinod Koul
2021-12-01 15:03   ` Konrad Dybcio
2021-12-06  5:39     ` Vinod Koul
2021-12-07 14:35       ` Bjorn Andersson
2021-12-07 14:53   ` Bjorn Andersson
2021-12-01  7:29 ` [PATCH 02/15] arm64: dts: qcom: Add base SM8450 QRD DTS Vinod Koul
2021-12-01 15:05   ` Konrad Dybcio
2021-12-01  7:29 ` [PATCH 03/15] arm64: dts: qcom: sm8450: Add tlmm nodes Vinod Koul
2021-12-07 14:37   ` Bjorn Andersson
2021-12-01  7:29 ` [PATCH 04/15] arm64: dts: qcom: sm8450-qrd: Add reserved gpio range for QRD Vinod Koul
2021-12-01 15:07   ` Konrad Dybcio
2021-12-06  5:53     ` Vinod Koul
2021-12-07 14:56       ` Bjorn Andersson
2021-12-01  7:29 ` [PATCH 05/15] arm64: dts: qcom: sm8450: Add reserved memory nodes Vinod Koul
2021-12-01 15:11   ` Konrad Dybcio
2021-12-06  5:42     ` Vinod Koul
2021-12-01  7:29 ` [PATCH 06/15] arm64: dts: qcom: sm8450: add smmu nodes Vinod Koul
2021-12-01 15:13   ` Konrad Dybcio
2021-12-01  7:29 ` [PATCH 07/15] arm64: dts: qcom: sm8450-qrd: Add rpmh regulator nodes Vinod Koul
2021-12-01 15:14   ` Konrad Dybcio
2021-12-01  7:29 ` Vinod Koul [this message]
2021-12-01 15:16   ` [PATCH 08/15] arm64: dts: qcom: sm8450: add ufs nodes Konrad Dybcio
2021-12-01  7:29 ` [PATCH 09/15] arm64: dts: qcom: sm8450-qrd: enable " Vinod Koul
2021-12-01 15:18   ` Konrad Dybcio
2021-12-06  5:58     ` Vinod Koul
2021-12-07 15:01       ` Bjorn Andersson
2021-12-01  7:29 ` [PATCH 10/15] arm64: dts: qcom: sm8450: add interconnect nodes Vinod Koul
2021-12-01 15:20   ` Konrad Dybcio
2021-12-06  6:12     ` Vinod Koul
2021-12-01  7:29 ` [PATCH 11/15] arm64: dts: qcom: sm8450: add spmi node Vinod Koul
2021-12-01 15:22   ` Konrad Dybcio
2021-12-01  7:29 ` [PATCH 12/15] arm64: dts: qcom: sm8450-qrd: include pmic files Vinod Koul
2021-12-01 15:23   ` Konrad Dybcio
2021-12-07 15:05     ` Bjorn Andersson
2021-12-07 15:51       ` Vinod Koul
2021-12-01  7:29 ` [PATCH 13/15] arm64: dts: qcom: sm8450: Add rpmhpd node Vinod Koul
2021-12-01 15:24   ` Konrad Dybcio
2021-12-01  7:29 ` [PATCH 14/15] arm64: dts: qcom: sm8450: add cpufreq support Vinod Koul
2021-12-01 15:28   ` Konrad Dybcio
2021-12-09  7:11     ` Vinod Koul
2021-12-01  7:29 ` [PATCH 15/15] arm64: dts: qcom: sm8450: add i2c13 and i2c14 device nodes Vinod Koul
2021-12-01 15:30   ` Konrad Dybcio
2021-12-09  7:13     ` Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211201072915.3969178-9-vkoul@kernel.org \
    --to=vkoul@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.