All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH 3/3] drm/i915: Refine VT-d scanout workaround
Date: Thu,  2 Dec 2021 14:01:25 +0530	[thread overview]
Message-ID: <20211202083125.3999668-4-tejaskumarx.surendrakumar.upadhyay@intel.com> (raw)
In-Reply-To: <20211202083125.3999668-1-tejaskumarx.surendrakumar.upadhyay@intel.com>

From: Chris Wilson <chris@chris-wilson.co.uk>

VT-d may cause overfetch of the scanout PTE, both before and after the
vma (depending on the scanout orientation). bspec recommends that we
provide a tile-row in either directions, and suggests using 168 PTE,
warning that the accesses will wrap around the ends of the GGTT.
Currently, we fill the entire GGTT with scratch pages when using VT-d to
always ensure there are valid entries around every vma, including
scanout. However, writing every PTE is slow as on recent devices we
perform 8MiB of uncached writes, incurring an extra 100ms during resume.

If instead we focus on only putting guard pages around scanout, we can
avoid touching the whole GGTT. To avoid having to introduce extra nodes
around each scanout vma, we adjust the scanout drm_mm_node to be smaller
than the allocated space, and fixup the extra PTE during dma binding.

v2: Move the guard from modifying drm_mm_node.start which is still used
by the drm_mm itself, into an adjustment of node.start at the point of
use.

v3: Pass the requested guard padding from the caller, so we can drop the
VT-d w/a knowledge from the i915_vma allocator.

v4: Bump minimum padding to 168 PTE and cautiously ensure that a full
tile row around the vma is included with the guard.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
---
 drivers/gpu/drm/i915/gem/i915_gem_domain.c | 13 +++++++++++
 drivers/gpu/drm/i915/gt/intel_ggtt.c       | 25 +---------------------
 drivers/gpu/drm/i915/i915_gem_gtt.h        |  1 +
 drivers/gpu/drm/i915/i915_vma.c            |  8 +++++++
 4 files changed, 23 insertions(+), 24 deletions(-)

diff --git a/drivers/gpu/drm/i915/gem/i915_gem_domain.c b/drivers/gpu/drm/i915/gem/i915_gem_domain.c
index 26532c07d467..0e014f186807 100644
--- a/drivers/gpu/drm/i915/gem/i915_gem_domain.c
+++ b/drivers/gpu/drm/i915/gem/i915_gem_domain.c
@@ -16,6 +16,8 @@
 #include "i915_gem_lmem.h"
 #include "i915_gem_mman.h"
 
+#define VTD_GUARD (168u * I915_GTT_PAGE_SIZE) /* 168 or tile-row PTE padding */
+
 static bool gpu_write_needs_clflush(struct drm_i915_gem_object *obj)
 {
 	struct drm_i915_private *i915 = to_i915(obj->base.dev);
@@ -423,6 +425,17 @@ i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj,
 	if (ret)
 		return ERR_PTR(ret);
 
+	/* VT-d may overfetch before/after the vma, so pad with scratch */
+	if (intel_scanout_needs_vtd_wa(i915)) {
+		unsigned int guard = VTD_GUARD;
+
+		if (i915_gem_object_is_tiled(obj))
+			guard = max(guard,
+					i915_gem_object_get_tile_row_size(obj));
+
+		flags |= PIN_OFFSET_GUARD | guard;
+	}
+
 	/*
 	 * As the user may map the buffer once pinned in the display plane
 	 * (e.g. libkms for the bootup splash), we have to ensure that we
diff --git a/drivers/gpu/drm/i915/gt/intel_ggtt.c b/drivers/gpu/drm/i915/gt/intel_ggtt.c
index 282ed6dd3ca2..4a0f916ab03f 100644
--- a/drivers/gpu/drm/i915/gt/intel_ggtt.c
+++ b/drivers/gpu/drm/i915/gt/intel_ggtt.c
@@ -337,27 +337,6 @@ static void nop_clear_range(struct i915_address_space *vm,
 {
 }
 
-static void gen8_ggtt_clear_range(struct i915_address_space *vm,
-				  u64 start, u64 length)
-{
-	struct i915_ggtt *ggtt = i915_vm_to_ggtt(vm);
-	unsigned int first_entry = start / I915_GTT_PAGE_SIZE;
-	unsigned int num_entries = length / I915_GTT_PAGE_SIZE;
-	const gen8_pte_t scratch_pte = vm->scratch[0]->encode;
-	gen8_pte_t __iomem *gtt_base =
-		(gen8_pte_t __iomem *)ggtt->gsm + first_entry;
-	const int max_entries = ggtt_total_entries(ggtt) - first_entry;
-	int i;
-
-	if (WARN(num_entries > max_entries,
-		 "First entry = %d; Num entries = %d (max=%d)\n",
-		 first_entry, num_entries, max_entries))
-		num_entries = max_entries;
-
-	for (i = 0; i < num_entries; i++)
-		gen8_set_pte(&gtt_base[i], scratch_pte);
-}
-
 static void bxt_vtd_ggtt_wa(struct i915_address_space *vm)
 {
 	/*
@@ -956,8 +935,6 @@ static int gen8_gmch_probe(struct i915_ggtt *ggtt)
 	ggtt->vm.cleanup = gen6_gmch_remove;
 	ggtt->vm.insert_page = gen8_ggtt_insert_page;
 	ggtt->vm.clear_range = nop_clear_range;
-	if (intel_scanout_needs_vtd_wa(i915))
-		ggtt->vm.clear_range = gen8_ggtt_clear_range;
 
 	ggtt->vm.insert_entries = gen8_ggtt_insert_entries;
 
@@ -1105,7 +1082,7 @@ static int gen6_gmch_probe(struct i915_ggtt *ggtt)
 	ggtt->vm.alloc_pt_dma = alloc_pt_dma;
 
 	ggtt->vm.clear_range = nop_clear_range;
-	if (!HAS_FULL_PPGTT(i915) || intel_scanout_needs_vtd_wa(i915))
+	if (!HAS_FULL_PPGTT(i915))
 		ggtt->vm.clear_range = gen6_ggtt_clear_range;
 	ggtt->vm.insert_page = gen6_ggtt_insert_page;
 	ggtt->vm.insert_entries = gen6_ggtt_insert_entries;
diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.h b/drivers/gpu/drm/i915/i915_gem_gtt.h
index c9b0ee5e1d23..f3ae9afdee15 100644
--- a/drivers/gpu/drm/i915/i915_gem_gtt.h
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.h
@@ -41,6 +41,7 @@ int i915_gem_gtt_insert(struct i915_address_space *vm,
 #define PIN_HIGH		BIT_ULL(5)
 #define PIN_OFFSET_BIAS		BIT_ULL(6)
 #define PIN_OFFSET_FIXED	BIT_ULL(7)
+#define PIN_OFFSET_GUARD	BIT_ULL(8)
 
 #define PIN_GLOBAL		BIT_ULL(10) /* I915_VMA_GLOBAL_BIND */
 #define PIN_USER		BIT_ULL(11) /* I915_VMA_LOCAL_BIND */
diff --git a/drivers/gpu/drm/i915/i915_vma.c b/drivers/gpu/drm/i915/i915_vma.c
index 080ffa583edf..d92a9f938c68 100644
--- a/drivers/gpu/drm/i915/i915_vma.c
+++ b/drivers/gpu/drm/i915/i915_vma.c
@@ -587,6 +587,9 @@ bool i915_vma_misplaced(const struct i915_vma *vma,
 	    i915_vma_offset(vma) != (flags & PIN_OFFSET_MASK))
 		return true;
 
+	if (flags & PIN_OFFSET_GUARD && vma->guard < (flags & PIN_OFFSET_MASK))
+		return true;
+
 	return false;
 }
 
@@ -664,6 +667,7 @@ i915_vma_insert(struct i915_vma *vma, u64 size, u64 alignment, u64 flags)
 
 	GEM_BUG_ON(i915_vma_is_bound(vma, I915_VMA_GLOBAL_BIND | I915_VMA_LOCAL_BIND));
 	GEM_BUG_ON(drm_mm_node_allocated(&vma->node));
+	GEM_BUG_ON(hweight64(flags & (PIN_OFFSET_GUARD | PIN_OFFSET_FIXED | PIN_OFFSET_BIAS)) > 1);
 
 	size = max(size, vma->size);
 	alignment = max_t(typeof(alignment), alignment, vma->display_alignment);
@@ -678,6 +682,10 @@ i915_vma_insert(struct i915_vma *vma, u64 size, u64 alignment, u64 flags)
 	GEM_BUG_ON(!is_power_of_2(alignment));
 
 	guard = vma->guard; /* retain guard across rebinds */
+	if (flags & PIN_OFFSET_GUARD) {
+		GEM_BUG_ON(overflows_type(flags & PIN_OFFSET_MASK, u32));
+		guard = max_t(u32, guard, flags & PIN_OFFSET_MASK);
+	}
 	guard = ALIGN(guard, alignment);
 
 	start = flags & PIN_OFFSET_BIAS ? flags & PIN_OFFSET_MASK : 0;
-- 
2.31.1


  parent reply	other threads:[~2021-12-02  8:38 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-02  8:31 [Intel-gfx] [PATCH 0/3] Replace VT-d workaround with guard pages Tejas Upadhyay
2021-12-02  8:31 ` [Intel-gfx] [PATCH 1/3] drm/i915: Wrap all access to i915_vma.node.start|size Tejas Upadhyay
2021-12-03  9:02   ` Ramalingam C
2021-12-02  8:31 ` [Intel-gfx] [PATCH 2/3] drm/i915: Introduce guard pages to i915_vma Tejas Upadhyay
2021-12-02  8:31 ` Tejas Upadhyay [this message]
2021-12-02  9:08 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Replace VT-d workaround with guard pages Patchwork
2021-12-02  9:10 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2021-12-02  9:31 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
  -- strict thread matches above, loose matches on Subject: below --
2022-11-09 17:40 [PATCH 0/3] add guard padding around i915_vma Andi Shyti
2022-11-09 17:40 ` [Intel-gfx] [PATCH 3/3] drm/i915: Refine VT-d scanout workaround Andi Shyti
2022-11-09 16:49 [PATCH 0/3] add guard patting around i915_vma Andi Shyti
2022-11-09 16:49 ` [Intel-gfx] [PATCH 3/3] drm/i915: Refine VT-d scanout workaround Andi Shyti
2021-02-15 15:56 [Intel-gfx] [PATCH 1/3] drm/i915: Wrap all access to i915_vma.node.start|size Chris Wilson
2021-02-15 15:56 ` [Intel-gfx] [PATCH 3/3] drm/i915: Refine VT-d scanout workaround Chris Wilson
2021-02-15 18:07   ` Matthew Auld
2021-02-12 10:22 [Intel-gfx] [PATCH 1/3] drm/i915: Wrap all access to i915_vma.node.start|size Chris Wilson
2021-02-12 10:22 ` [Intel-gfx] [PATCH 3/3] drm/i915: Refine VT-d scanout workaround Chris Wilson
2021-02-12 13:46   ` Matthew Auld

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211202083125.3999668-4-tejaskumarx.surendrakumar.upadhyay@intel.com \
    --to=tejaskumarx.surendrakumar.upadhyay@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.