All of lore.kernel.org
 help / color / mirror / Atom feed
From: Simon Glass <sjg@chromium.org>
To: U-Boot Mailing List <u-boot@lists.denx.de>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>,
	Christian Melki <christian.melki@t2data.com>,
	Bin Meng <bmeng.cn@gmail.com>,
	Heinrich Schuchardt <xypron.glpk@gmx.de>,
	Tom Rini <trini@konsulko.com>, Simon Glass <sjg@chromium.org>,
	Alexander Graf <agraf@csgraf.de>
Subject: [PATCH v5 09/28] x86: efi: Add room for the binman definition in the dtb
Date: Sat,  4 Dec 2021 08:56:38 -0700	[thread overview]
Message-ID: <20211204155657.2913911-6-sjg@chromium.org> (raw)
In-Reply-To: <20211204155657.2913911-1-sjg@chromium.org>

At present only 4KB of spare space is left in the DTB when building the
EFI app. Increase this to 32KB so there is plenty of space to insert the
binman definition. This cannot be expanded later (as with OF_SEPARATE)
because the ELF image has already been built.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

(no changes since v1)

 arch/x86/dts/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/dts/Makefile b/arch/x86/dts/Makefile
index be209aaaf8f..5c8c05ec499 100644
--- a/arch/x86/dts/Makefile
+++ b/arch/x86/dts/Makefile
@@ -24,7 +24,7 @@ dtb-y += bayleybay.dtb \
 
 targets += $(dtb-y)
 
-DTC_FLAGS += -R 4 -p 0x1000
+DTC_FLAGS += -R 4 -p $(if $(CONFIG_EFI_APP),0x8000,0x1000)
 
 PHONY += dtbs
 dtbs: $(addprefix $(obj)/, $(dtb-y))
-- 
2.34.1.400.ga245620fadb-goog


  parent reply	other threads:[~2021-12-04 15:58 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-04 15:56 [PATCH v5 00/28] efi: Improvements to U-Boot running on top of UEFI Simon Glass
2021-12-04 15:56 ` [PATCH v5 01/28] efi: Rename UCLASS_EFI and IF_TYPE_EFI Simon Glass
2021-12-09 18:38   ` Heinrich Schuchardt
2021-12-04 15:56 ` [PATCH v5 02/28] efi: Add EFI uclass for media Simon Glass
2021-12-09 18:54   ` Heinrich Schuchardt
2021-12-04 15:56 ` [PATCH v5 03/28] efi: Add a media/block driver for EFI block devices Simon Glass
2021-12-09 19:04   ` Heinrich Schuchardt
2021-12-04 15:56 ` [PATCH v5 04/28] efi: Locate all block devices in the app Simon Glass
2021-12-04 18:43   ` Heinrich Schuchardt
2021-12-09 19:23     ` Heinrich Schuchardt
2021-12-17 16:37       ` Simon Glass
2021-12-04 15:56 ` [PATCH v5 05/28] efi: serial: Support arrow keys Simon Glass
2021-12-09 19:39   ` Heinrich Schuchardt
2021-12-17 16:37     ` Simon Glass
2021-12-17 17:09       ` Heinrich Schuchardt
2021-12-17 17:42         ` Simon Glass
2021-12-04 15:56 ` [PATCH v5 06/28] bloblist: Support allocating the bloblist Simon Glass
2021-12-04 15:56 ` [PATCH v5 07/28] x86: Allow booting a kernel from the EFI app Simon Glass
2021-12-04 15:56 ` [PATCH v5 08/28] x86: Don't process the kernel command line unless enabled Simon Glass
2021-12-04 15:56 ` Simon Glass [this message]
2021-12-04 15:56 ` [PATCH v5 10/28] efi: Drop device_path from struct efi_priv Simon Glass
2021-12-04 15:56 ` [PATCH v5 11/28] efi: Add comments to " Simon Glass
2021-12-04 15:56 ` [PATCH v5 12/28] efi: Fix ll_boot_init() operation with the app Simon Glass
2021-12-04 15:56 ` [PATCH v5 13/28] efi: Add a few comments to the stub Simon Glass
2021-12-04 19:10   ` Heinrich Schuchardt
2021-12-04 15:56 ` [PATCH v5 14/28] efi: Share struct efi_priv between the app and stub code Simon Glass
2021-12-04 15:56 ` [PATCH v5 15/28] efi: Move exit_boot_services into a function Simon Glass
2021-12-04 19:13   ` Heinrich Schuchardt
2021-12-17 16:37     ` Simon Glass
2021-12-04 15:56 ` [PATCH v5 16/28] efi: Check for failure when initing the app Simon Glass
2021-12-09 20:17   ` Heinrich Schuchardt
2021-12-04 15:56 ` [PATCH v5 17/28] efi: Mention that efi_info_get() is only used in the stub Simon Glass
2021-12-09 20:20   ` Heinrich Schuchardt
2021-12-04 15:56 ` [PATCH v5 18/28] efi: Show when allocated pages are used Simon Glass
2021-12-09 19:55   ` Heinrich Schuchardt
2021-12-17 16:37     ` Simon Glass
2021-12-04 15:56 ` [PATCH v5 19/28] efi: Allow easy selection of serial-only operation Simon Glass
2021-12-04 15:56 ` [PATCH v5 20/28] x86: efi: Update efi_get_next_mem_desc() to avoid needing a map Simon Glass
2021-12-04 15:56 ` [PATCH v5 21/28] efi: Support the efi command in the app Simon Glass
2021-12-09 20:27   ` Heinrich Schuchardt
2021-12-17 16:37     ` Simon Glass
2021-12-20  2:38       ` AKASHI Takahiro
2021-12-29 13:36         ` Simon Glass
2021-12-04 15:56 ` [PATCH v5 22/28] x86: efi: Show the system-table revision Simon Glass
2021-12-09 20:29   ` Heinrich Schuchardt
2021-12-17 16:37     ` Simon Glass
2021-12-04 15:56 ` [PATCH v5 23/28] x86: efi: Don't set up global_data again with EFI Simon Glass
2021-12-04 15:56 ` [PATCH v5 24/28] x86: efi: Tweak the code used for the 64-bit EFI app Simon Glass
2021-12-04 15:56 ` [PATCH v5 25/28] x86: efi: Round out the link script for 64-bit EFI Simon Glass
2021-12-04 15:56 ` [PATCH v5 26/28] x86: efi: Don't use the 64-bit link script for the EFI app Simon Glass
2021-12-05 14:03   ` Christian Melki
2021-12-04 15:56 ` [PATCH v5 27/28] x86: efi: Set the correct link flags for the 64-bit " Simon Glass
2021-12-05 14:03   ` Christian Melki
2021-12-04 15:56 ` [PATCH v5 28/28] efi: Build the 64-bit app properly Simon Glass

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211204155657.2913911-6-sjg@chromium.org \
    --to=sjg@chromium.org \
    --cc=agraf@csgraf.de \
    --cc=bmeng.cn@gmail.com \
    --cc=christian.melki@t2data.com \
    --cc=ilias.apalodimas@linaro.org \
    --cc=trini@konsulko.com \
    --cc=u-boot@lists.denx.de \
    --cc=xypron.glpk@gmx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.