From: Thomas Huth <thuth@redhat.com>
To: qemu-devel@nongnu.org
Cc: Richard Henderson <richard.henderson@linaro.org>,
"Richard W . M . Jones" <rjones@redhat.com>
Subject: [PULL 09/16] Move the libssh setup from configure to meson.build
Date: Wed, 15 Dec 2021 08:33:55 +0100 [thread overview]
Message-ID: <20211215073402.144286-10-thuth@redhat.com> (raw)
In-Reply-To: <20211215073402.144286-1-thuth@redhat.com>
It's easier to do this in meson.build now.
Message-Id: <20211209144801.148388-1-thuth@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
configure | 27 ---------------------------
meson.build | 13 +++++++++----
meson_options.txt | 2 ++
scripts/meson-buildoptions.sh | 3 +++
4 files changed, 14 insertions(+), 31 deletions(-)
diff --git a/configure b/configure
index 48c21775f3..bb99a40ed0 100755
--- a/configure
+++ b/configure
@@ -344,7 +344,6 @@ debug_stack_usage="no"
crypto_afalg="no"
tls_priority="NORMAL"
tpm="$default_feature"
-libssh="$default_feature"
live_block_migration=${default_feature:-yes}
numa="$default_feature"
replication=${default_feature:-yes}
@@ -1078,10 +1077,6 @@ for opt do
;;
--enable-tpm) tpm="yes"
;;
- --disable-libssh) libssh="no"
- ;;
- --enable-libssh) libssh="yes"
- ;;
--disable-live-block-migration) live_block_migration="no"
;;
--enable-live-block-migration) live_block_migration="yes"
@@ -1448,7 +1443,6 @@ cat << EOF
live-block-migration Block migration in the main migration stream
coroutine-pool coroutine freelist (better performance)
tpm TPM support
- libssh ssh block device support
numa libnuma support
avx2 AVX2 optimization support
avx512f AVX512F optimization support
@@ -2561,21 +2555,6 @@ if test "$modules" = yes; then
fi
fi
-##########################################
-# libssh probe
-if test "$libssh" != "no" ; then
- if $pkg_config --exists "libssh >= 0.8.7"; then
- libssh_cflags=$($pkg_config libssh --cflags)
- libssh_libs=$($pkg_config libssh --libs)
- libssh=yes
- else
- if test "$libssh" = "yes" ; then
- error_exit "libssh required for --enable-libssh"
- fi
- libssh=no
- fi
-fi
-
##########################################
# TPM emulation is only on POSIX
@@ -3636,12 +3615,6 @@ if test "$cmpxchg128" = "yes" ; then
echo "CONFIG_CMPXCHG128=y" >> $config_host_mak
fi
-if test "$libssh" = "yes" ; then
- echo "CONFIG_LIBSSH=y" >> $config_host_mak
- echo "LIBSSH_CFLAGS=$libssh_cflags" >> $config_host_mak
- echo "LIBSSH_LIBS=$libssh_libs" >> $config_host_mak
-fi
-
if test "$live_block_migration" = "yes" ; then
echo "CONFIG_LIVE_BLOCK_MIGRATION=y" >> $config_host_mak
fi
diff --git a/meson.build b/meson.build
index 96de1a6ef9..ae67ca28ab 100644
--- a/meson.build
+++ b/meson.build
@@ -874,11 +874,15 @@ if not get_option('glusterfs').auto() or have_block
''', dependencies: glusterfs)
endif
endif
+
libssh = not_found
-if 'CONFIG_LIBSSH' in config_host
- libssh = declare_dependency(compile_args: config_host['LIBSSH_CFLAGS'].split(),
- link_args: config_host['LIBSSH_LIBS'].split())
+if not get_option('libssh').auto() or have_block
+ libssh = dependency('libssh', version: '>=0.8.7',
+ method: 'pkg-config',
+ required: get_option('libssh'),
+ kwargs: static_kwargs)
endif
+
libbzip2 = not_found
if not get_option('bzip2').auto() or have_block
libbzip2 = cc.find_library('bz2', has_headers: ['bzlib.h'],
@@ -1451,6 +1455,7 @@ config_host_data.set('CONFIG_EBPF', libbpf.found())
config_host_data.set('CONFIG_LIBDAXCTL', libdaxctl.found())
config_host_data.set('CONFIG_LIBISCSI', libiscsi.found())
config_host_data.set('CONFIG_LIBNFS', libnfs.found())
+config_host_data.set('CONFIG_LIBSSH', libssh.found())
config_host_data.set('CONFIG_LINUX_AIO', libaio.found())
config_host_data.set('CONFIG_LINUX_IO_URING', linux_io_uring.found())
config_host_data.set('CONFIG_LIBPMEM', libpmem.found())
@@ -3430,7 +3435,7 @@ endif
summary_info += {'seccomp support': seccomp}
summary_info += {'GlusterFS support': glusterfs}
summary_info += {'TPM support': config_host.has_key('CONFIG_TPM')}
-summary_info += {'libssh support': config_host.has_key('CONFIG_LIBSSH')}
+summary_info += {'libssh support': libssh}
summary_info += {'lzo support': lzo}
summary_info += {'snappy support': snappy}
summary_info += {'bzip2 support': libbzip2}
diff --git a/meson_options.txt b/meson_options.txt
index e392323732..4114bfcaa4 100644
--- a/meson_options.txt
+++ b/meson_options.txt
@@ -105,6 +105,8 @@ option('libdaxctl', type : 'feature', value : 'auto',
description: 'libdaxctl support')
option('libpmem', type : 'feature', value : 'auto',
description: 'libpmem support')
+option('libssh', type : 'feature', value : 'auto',
+ description: 'ssh block device support')
option('libudev', type : 'feature', value : 'auto',
description: 'Use libudev to enumerate host devices')
option('libusb', type : 'feature', value : 'auto',
diff --git a/scripts/meson-buildoptions.sh b/scripts/meson-buildoptions.sh
index 7a17ff4218..ae8f18edc2 100644
--- a/scripts/meson-buildoptions.sh
+++ b/scripts/meson-buildoptions.sh
@@ -53,6 +53,7 @@ meson_options_help() {
printf "%s\n" ' libiscsi libiscsi userspace initiator'
printf "%s\n" ' libnfs libnfs block device driver'
printf "%s\n" ' libpmem libpmem support'
+ printf "%s\n" ' libssh ssh block device support'
printf "%s\n" ' libudev Use libudev to enumerate host devices'
printf "%s\n" ' libusb libusb support for USB passthrough'
printf "%s\n" ' libxml2 libxml2 support for Parallels image format'
@@ -177,6 +178,8 @@ _meson_option_parse() {
--disable-libnfs) printf "%s" -Dlibnfs=disabled ;;
--enable-libpmem) printf "%s" -Dlibpmem=enabled ;;
--disable-libpmem) printf "%s" -Dlibpmem=disabled ;;
+ --enable-libssh) printf "%s" -Dlibssh=enabled ;;
+ --disable-libssh) printf "%s" -Dlibssh=disabled ;;
--enable-libudev) printf "%s" -Dlibudev=enabled ;;
--disable-libudev) printf "%s" -Dlibudev=disabled ;;
--enable-libusb) printf "%s" -Dlibusb=enabled ;;
--
2.27.0
next prev parent reply other threads:[~2021-12-15 7:45 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-15 7:33 [PULL 00/16] qtest and gitlab-CI improvements Thomas Huth
2021-12-15 7:33 ` [PULL 01/16] qtest/libqos: add a function to initialize secondary PCI buses Thomas Huth
2021-12-15 7:33 ` [PULL 02/16] tests/qtest: add some tests for virtio-net failover Thomas Huth
2021-12-15 7:33 ` [PULL 03/16] tests/libqtest: add some virtio-net failover migration cancelling tests Thomas Huth
2021-12-15 7:33 ` [PULL 04/16] tests/libqtest: add a migration test with two couples of failover devices Thomas Huth
2021-12-15 7:33 ` [PULL 05/16] tests/qtest: Run the PPC 32-bit tests with the 64-bit target binary, too Thomas Huth
2021-12-15 7:33 ` [PULL 06/16] tests/qtest: Fence the tests that need xlnx-zcu102 with CONFIG_XLNX_ZYNQMP_ARM Thomas Huth
2021-12-15 7:33 ` [PULL 07/16] tests/qtest: Add a function that gets a list with available machine types Thomas Huth
2021-12-15 7:33 ` [PULL 08/16] tests/qtest: Add a function to check whether a machine is available Thomas Huth
2021-12-15 7:33 ` Thomas Huth [this message]
2021-12-15 7:33 ` [PULL 10/16] gitlab-ci.d/buildtest: Add jobs that run the device-crash-test Thomas Huth
2021-12-15 7:33 ` [PULL 11/16] gitlab-ci: Add cirrus-ci based tests for NetBSD and OpenBSD Thomas Huth
2021-12-15 7:33 ` [PULL 12/16] virtio-iommu: Remove set_config callback Thomas Huth
2021-12-15 7:33 ` [PULL 13/16] virtio-iommu: Fix endianness in get_config Thomas Huth
2021-12-15 7:34 ` [PULL 14/16] virtio-iommu: Fix the domain_range end Thomas Huth
2021-12-15 7:34 ` [PULL 15/16] tests: qtest: Add virtio-iommu test Thomas Huth
2021-12-15 7:34 ` [PULL 16/16] gitlab-ci: Test compilation on Windows with MSYS2 Thomas Huth
2021-12-15 17:14 ` [PULL 00/16] qtest and gitlab-CI improvements Richard Henderson
2021-12-15 20:33 ` Thomas Huth
2021-12-18 16:33 ` Philippe Mathieu-Daudé
2021-12-20 6:52 ` Thomas Huth
2021-12-20 9:24 ` Philippe Mathieu-Daudé
2021-12-20 9:53 ` Thomas Huth
2021-12-20 13:11 ` Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211215073402.144286-10-thuth@redhat.com \
--to=thuth@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=rjones@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.