From: Tony Dinh <mibodhi@gmail.com>
To: U-Boot Mailing List <u-boot@lists.denx.de>, Stefan Roese <sr@denx.de>
Cc: "Marek Beh�n" <marek.behun@nic.cz>,
"Pali Roh�r" <pali@kernel.org>,
"David Purdy" <david.c.purdy@gmail.com>,
"Tom Rini" <trini@konsulko.com>, "Tony Dinh" <mibodhi@gmail.com>,
"Andre Przywara" <andre.przywara@arm.com>,
"Christian Hewitt" <christianshewitt@gmail.com>,
"Fabio Estevam" <festevam@denx.de>,
"Jagan Teki" <jagan@amarulasolutions.com>,
"Lokesh Vutla" <lokeshvutla@ti.com>,
"Neil Armstrong" <narmstrong@baylibre.com>,
"Peter Robinson" <pbrobinson@gmail.com>,
"Tim Harvey" <tharvey@gateworks.com>
Subject: [PATCH v2 0/8] arm: kirkwood: Add support for Pogoplug V4
Date: Wed, 22 Dec 2021 23:26:40 -0800 [thread overview]
Message-ID: <20211223072649.13237-1-mibodhi@gmail.com> (raw)
Pogoplug V4 specifications:
Kirkwood 88F6192 SoC
800 MHz CPU
1Gbs Ethernet
128 MB RAM
128 MB NAND
1x USB 2.0
2x USB 3.0 (on PCIe bus)
1 SDHC slot
1x External SATA port (USM enclosure form factor slot)
Thanks to all v1 reviewers, all their comments were incorporated in this v2 patch series.
Changes in v2:
- Use mainline Linux DTS version
- Use canonical format for defconfig file
- Merge all constants into the pogo_v4.c file, remove pogo_v4.h
Merge constants from header file.
Tony Dinh (8):
arm: kirkwood: Pogoplug-V4 : Add DTS files
arm: kirkwood: Pogoplug V4 : Add board defconfig file
arm: kirkwood: Pogoplug-V4 : Add Kconfig files
arm: kirkwood: Pogoplug-V4 : Add board include configs file
arm: kirkwood: Pogoplug-V4 : Add board kwbimage file
arm: kirkwood: Pogoplug-V4 : Add board Make file
arm: kirkwood: Pogoplug-V4 : Add board implementation
arm: kirkwood: Pogoplug-V4 : Add board maintainer
arch/arm/dts/Makefile | 1 +
arch/arm/dts/kirkwood-pogoplug-series-4.dts | 180 ++++++++++++++++
arch/arm/mach-kirkwood/Kconfig | 4 +
board/cloudengines/pogo_v4/Kconfig | 16 ++
board/cloudengines/pogo_v4/MAINTAINERS | 6 +
board/cloudengines/pogo_v4/Makefile | 10 +
board/cloudengines/pogo_v4/kwbimage.cfg | 148 +++++++++++++
board/cloudengines/pogo_v4/pogo_v4.c | 220 ++++++++++++++++++++
configs/pogo_v4_defconfig | 73 +++++++
include/configs/pogo_v4.h | 94 +++++++++
10 files changed, 752 insertions(+)
create mode 100644 arch/arm/dts/kirkwood-pogoplug-series-4.dts
create mode 100644 board/cloudengines/pogo_v4/Kconfig
create mode 100644 board/cloudengines/pogo_v4/MAINTAINERS
create mode 100644 board/cloudengines/pogo_v4/Makefile
create mode 100644 board/cloudengines/pogo_v4/kwbimage.cfg
create mode 100644 board/cloudengines/pogo_v4/pogo_v4.c
create mode 100644 configs/pogo_v4_defconfig
create mode 100644 include/configs/pogo_v4.h
--
2.20.1
next reply other threads:[~2021-12-23 7:27 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-23 7:26 Tony Dinh [this message]
2021-12-23 7:26 ` [PATCH v2 1/8] arm: kirkwood: Pogoplug-V4 : Add DTS files Tony Dinh
2022-01-13 13:32 ` Stefan Roese
2021-12-23 7:26 ` [PATCH v2 2/8] arm: kirkwood: Pogoplug V4 : Add board defconfig file Tony Dinh
2022-01-13 13:33 ` Stefan Roese
2021-12-23 7:26 ` [PATCH v2 3/8] arm: kirkwood: Pogoplug-V4 : Add Kconfig files Tony Dinh
2022-01-13 13:35 ` Stefan Roese
2021-12-23 7:26 ` [PATCH v2 4/8] arm: kirkwood: Pogoplug-V4 : Add board include configs file Tony Dinh
2022-01-13 13:32 ` Stefan Roese
2022-01-13 13:36 ` Tom Rini
2022-01-14 0:50 ` Tony Dinh
2022-01-14 1:41 ` Tom Rini
2021-12-23 7:26 ` [PATCH v2 5/8] arm: kirkwood: Pogoplug-V4 : Add board kwbimage file Tony Dinh
2022-01-13 13:36 ` Stefan Roese
2021-12-23 7:26 ` [PATCH v2 6/8] arm: kirkwood: Pogoplug-V4 : Add board Make file Tony Dinh
2022-01-13 13:37 ` Stefan Roese
2021-12-23 7:26 ` [PATCH v2 7/8] arm: kirkwood: Pogoplug-V4 : Add board implementation Tony Dinh
2022-01-13 13:38 ` Stefan Roese
2021-12-23 7:26 ` [PATCH v2 8/8] arm: kirkwood: Pogoplug-V4 : Add board maintainer Tony Dinh
2022-01-13 13:40 ` Stefan Roese
2022-01-13 23:32 ` Tony Dinh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211223072649.13237-1-mibodhi@gmail.com \
--to=mibodhi@gmail.com \
--cc=andre.przywara@arm.com \
--cc=christianshewitt@gmail.com \
--cc=david.c.purdy@gmail.com \
--cc=festevam@denx.de \
--cc=jagan@amarulasolutions.com \
--cc=lokeshvutla@ti.com \
--cc=marek.behun@nic.cz \
--cc=narmstrong@baylibre.com \
--cc=pali@kernel.org \
--cc=pbrobinson@gmail.com \
--cc=sr@denx.de \
--cc=tharvey@gateworks.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.