All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sean Christopherson <seanjc@google.com>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>,
	Vitaly Kuznetsov <vkuznets@redhat.com>,
	Wanpeng Li <wanpengli@tencent.com>,
	Jim Mattson <jmattson@google.com>, Joerg Roedel <joro@8bytes.org>,
	kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Ben Gardon <bgardon@google.com>,
	David Matlack <dmatlack@google.com>,
	Mingwei Zhang <mizhang@google.com>
Subject: [PATCH v2 07/30] KVM: x86/mmu: Formalize TDP MMU's (unintended?) deferred TLB flush logic
Date: Thu, 23 Dec 2021 22:22:55 +0000	[thread overview]
Message-ID: <20211223222318.1039223-8-seanjc@google.com> (raw)
In-Reply-To: <20211223222318.1039223-1-seanjc@google.com>

Explicitly ignore the result of zap_gfn_range() when putting the last
reference to a TDP MMU root, and add a pile of comments to formalize the
TDP MMU's behavior of deferring TLB flushes to alloc/reuse.  Note, this
only affects the !shared case, as zap_gfn_range() subtly never returns
true for "flush" as the flush is handled by tdp_mmu_zap_spte_atomic().

Putting the root without a flush is ok because even if there are stale
references to the root in the TLB, they are unreachable because KVM will
not run the guest with the same ASID without first flushing (where ASID
in this context refers to both SVM's explicit ASID and Intel's implicit
ASID that is constructed from VPID+PCID+EPT4A+etc...).

Signed-off-by: Sean Christopherson <seanjc@google.com>
---
 arch/x86/kvm/mmu/mmu.c     |  8 ++++++++
 arch/x86/kvm/mmu/tdp_mmu.c | 10 +++++++++-
 2 files changed, 17 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c
index 94590bc97a67..6549c13e89d9 100644
--- a/arch/x86/kvm/mmu/mmu.c
+++ b/arch/x86/kvm/mmu/mmu.c
@@ -5100,6 +5100,14 @@ int kvm_mmu_load(struct kvm_vcpu *vcpu)
 	kvm_mmu_sync_roots(vcpu);
 
 	kvm_mmu_load_pgd(vcpu);
+
+	/*
+	 * Flush any TLB entries for the new root, the provenance of the root
+	 * is unknown.  In theory, even if KVM ensures there are no stale TLB
+	 * entries for a freed root, in theory, an out-of-tree hypervisor could
+	 * have left stale entries.  Flushing on alloc also allows KVM to skip
+	 * the TLB flush when freeing a root (see kvm_tdp_mmu_put_root()).
+	 */
 	static_call(kvm_x86_tlb_flush_current)(vcpu);
 out:
 	return r;
diff --git a/arch/x86/kvm/mmu/tdp_mmu.c b/arch/x86/kvm/mmu/tdp_mmu.c
index 4f5c8e7380a9..66b75c197c94 100644
--- a/arch/x86/kvm/mmu/tdp_mmu.c
+++ b/arch/x86/kvm/mmu/tdp_mmu.c
@@ -93,7 +93,15 @@ void kvm_tdp_mmu_put_root(struct kvm *kvm, struct kvm_mmu_page *root,
 	list_del_rcu(&root->link);
 	spin_unlock(&kvm->arch.tdp_mmu_pages_lock);
 
-	zap_gfn_range(kvm, root, 0, -1ull, false, false, shared);
+	/*
+	 * A TLB flush is not necessary as KVM performs a local TLB flush when
+	 * allocating a new root (see kvm_mmu_load()), and when migrating vCPU
+	 * to a different pCPU.  Note, the local TLB flush on reuse also
+	 * invalidates any paging-structure-cache entries, i.e. TLB entries for
+	 * intermediate paging structures, that may be zapped, as such entries
+	 * are associated with the ASID on both VMX and SVM.
+	 */
+	(void)zap_gfn_range(kvm, root, 0, -1ull, false, false, shared);
 
 	call_rcu(&root->rcu_head, tdp_mmu_free_sp_rcu_callback);
 }
-- 
2.34.1.448.ga2b2bfdf31-goog


  parent reply	other threads:[~2021-12-23 22:24 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-23 22:22 [PATCH v2 00/30] KVM: x86/mmu: Overhaul TDP MMU zapping and flushing Sean Christopherson
2021-12-23 22:22 ` [PATCH v2 01/30] KVM: x86/mmu: Use common TDP MMU zap helper for MMU notifier unmap hook Sean Christopherson
2021-12-23 22:22 ` [PATCH v2 02/30] KVM: x86/mmu: Move "invalid" check out of kvm_tdp_mmu_get_root() Sean Christopherson
2021-12-23 22:22 ` [PATCH v2 03/30] KVM: x86/mmu: Zap _all_ roots when unmapping gfn range in TDP MMU Sean Christopherson
2021-12-23 22:22 ` [PATCH v2 04/30] KVM: x86/mmu: Use common iterator for walking invalid TDP MMU roots Sean Christopherson
2022-01-04 22:13   ` David Matlack
2021-12-23 22:22 ` [PATCH v2 05/30] KVM: x86/mmu: Check for present SPTE when clearing dirty bit in TDP MMU Sean Christopherson
2021-12-23 22:22 ` [PATCH v2 06/30] KVM: x86/mmu: Fix wrong/misleading comments in TDP MMU fast zap Sean Christopherson
2021-12-23 22:22 ` Sean Christopherson [this message]
2021-12-23 22:22 ` [PATCH v2 08/30] KVM: x86/mmu: Document that zapping invalidated roots doesn't need to flush Sean Christopherson
2021-12-23 22:22 ` [PATCH v2 09/30] KVM: x86/mmu: Drop unused @kvm param from kvm_tdp_mmu_get_root() Sean Christopherson
2021-12-23 22:22 ` [PATCH v2 10/30] KVM: x86/mmu: Require mmu_lock be held for write in unyielding root iter Sean Christopherson
2021-12-23 22:22 ` [PATCH v2 11/30] KVM: x86/mmu: Check for !leaf=>leaf, not PFN change, in TDP MMU SP removal Sean Christopherson
2021-12-23 22:23 ` [PATCH v2 12/30] KVM: x86/mmu: Batch TLB flushes from TDP MMU for MMU notifier change_spte Sean Christopherson
2021-12-23 22:23 ` [PATCH v2 13/30] KVM: x86/mmu: Drop RCU after processing each root in MMU notifier hooks Sean Christopherson
2021-12-23 22:23 ` [PATCH v2 14/30] KVM: x86/mmu: Add helpers to read/write TDP MMU SPTEs and document RCU Sean Christopherson
2021-12-23 22:23 ` [PATCH v2 15/30] KVM: x86/mmu: WARN if old _or_ new SPTE is REMOVED in non-atomic path Sean Christopherson
2021-12-23 22:23 ` [PATCH v2 16/30] KVM: x86/mmu: Refactor low-level TDP MMU set SPTE helper to take raw vals Sean Christopherson
2021-12-23 22:23 ` [PATCH v2 17/30] KVM: x86/mmu: Zap only the target TDP MMU shadow page in NX recovery Sean Christopherson
2021-12-23 22:23 ` [PATCH v2 18/30] KVM: x86/mmu: Skip remote TLB flush when zapping all of TDP MMU Sean Christopherson
2021-12-23 22:23 ` [PATCH v2 19/30] KVM: x86/mmu: Add dedicated helper to zap TDP MMU root shadow page Sean Christopherson
2021-12-23 22:23 ` [PATCH v2 20/30] KVM: x86/mmu: Require mmu_lock be held for write to zap TDP MMU range Sean Christopherson
2021-12-23 22:23 ` [PATCH v2 21/30] KVM: x86/mmu: Zap only TDP MMU leafs in kvm_zap_gfn_range() Sean Christopherson
2021-12-23 22:23 ` [PATCH v2 22/30] KVM: x86/mmu: Do remote TLB flush before dropping RCU in TDP MMU resched Sean Christopherson
2021-12-23 22:23 ` [PATCH v2 23/30] KVM: x86/mmu: Defer TLB flush to caller when freeing TDP MMU shadow pages Sean Christopherson
2021-12-23 22:23 ` [PATCH v2 24/30] KVM: x86/mmu: Allow yielding when zapping GFNs for defunct TDP MMU root Sean Christopherson
2022-01-05  1:25   ` David Matlack
2022-01-05 21:32     ` Sean Christopherson
2021-12-23 22:23 ` [PATCH v2 25/30] KVM: x86/mmu: Zap roots in two passes to avoid inducing RCU stalls Sean Christopherson
2022-01-05  0:19   ` David Matlack
2022-01-05 16:33     ` Sean Christopherson
2021-12-23 22:23 ` [PATCH v2 26/30] KVM: x86/mmu: Zap defunct roots via asynchronous worker Sean Christopherson
2021-12-23 22:23 ` [PATCH v2 27/30] KVM: selftests: Move raw KVM_SET_USER_MEMORY_REGION helper to utils Sean Christopherson
2021-12-23 22:23 ` [PATCH v2 28/30] KVM: selftests: Split out helper to allocate guest mem via memfd Sean Christopherson
2021-12-23 22:23 ` [PATCH v2 29/30] KVM: selftests: Define cpu_relax() helpers for s390 and x86 Sean Christopherson
2021-12-23 22:23 ` [PATCH v2 30/30] KVM: selftests: Add test to populate a VM with the max possible guest mem Sean Christopherson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211223222318.1039223-8-seanjc@google.com \
    --to=seanjc@google.com \
    --cc=bgardon@google.com \
    --cc=dmatlack@google.com \
    --cc=jmattson@google.com \
    --cc=joro@8bytes.org \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mizhang@google.com \
    --cc=pbonzini@redhat.com \
    --cc=vkuznets@redhat.com \
    --cc=wanpengli@tencent.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.