All of lore.kernel.org
 help / color / mirror / Atom feed
From: Aleksander Jan Bajkowski <olek2@wp.pl>
To: davem@davemloft.net, kuba@kernel.org, olek2@wp.pl, jgg@ziepe.ca,
	rdunlap@infradead.org, arnd@arndb.de, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH net-next] net: lantiq_etop: make alignment match open parenthesis
Date: Thu, 30 Dec 2021 00:39:52 +0100	[thread overview]
Message-ID: <20211229233952.5306-1-olek2@wp.pl> (raw)

checkpatch.pl complains as the following:

Alignment should match open parenthesis

Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
---
 drivers/net/ethernet/lantiq_etop.c | 34 +++++++++++++++---------------
 1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
index 072391c494ce..f0fbce3eb45b 100644
--- a/drivers/net/ethernet/lantiq_etop.c
+++ b/drivers/net/ethernet/lantiq_etop.c
@@ -111,9 +111,9 @@ ltq_etop_alloc_skb(struct ltq_etop_chan *ch)
 	ch->skb[ch->dma.desc] = netdev_alloc_skb(ch->netdev, MAX_DMA_DATA_LEN);
 	if (!ch->skb[ch->dma.desc])
 		return -ENOMEM;
-	ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(&priv->pdev->dev,
-		ch->skb[ch->dma.desc]->data, MAX_DMA_DATA_LEN,
-		DMA_FROM_DEVICE);
+	ch->dma.desc_base[ch->dma.desc].addr =
+		dma_map_single(&priv->pdev->dev, ch->skb[ch->dma.desc]->data,
+			       MAX_DMA_DATA_LEN, DMA_FROM_DEVICE);
 	ch->dma.desc_base[ch->dma.desc].addr =
 		CPHYSADDR(ch->skb[ch->dma.desc]->data);
 	ch->dma.desc_base[ch->dma.desc].ctl =
@@ -135,7 +135,7 @@ ltq_etop_hw_receive(struct ltq_etop_chan *ch)
 	spin_lock_irqsave(&priv->lock, flags);
 	if (ltq_etop_alloc_skb(ch)) {
 		netdev_err(ch->netdev,
-			"failed to allocate new rx buffer, stopping DMA\n");
+			   "failed to allocate new rx buffer, stopping DMA\n");
 		ltq_dma_close(&ch->dma);
 	}
 	ch->dma.desc++;
@@ -185,7 +185,7 @@ ltq_etop_poll_tx(struct napi_struct *napi, int budget)
 		dev_kfree_skb_any(ch->skb[ch->tx_free]);
 		ch->skb[ch->tx_free] = NULL;
 		memset(&ch->dma.desc_base[ch->tx_free], 0,
-			sizeof(struct ltq_dma_desc));
+		       sizeof(struct ltq_dma_desc));
 		ch->tx_free++;
 		ch->tx_free %= LTQ_DESC_NUM;
 	}
@@ -246,18 +246,18 @@ ltq_etop_hw_init(struct net_device *dev)
 
 	switch (priv->pldata->mii_mode) {
 	case PHY_INTERFACE_MODE_RMII:
-		ltq_etop_w32_mask(ETOP_MII_MASK,
-			ETOP_MII_REVERSE, LTQ_ETOP_CFG);
+		ltq_etop_w32_mask(ETOP_MII_MASK, ETOP_MII_REVERSE,
+				  LTQ_ETOP_CFG);
 		break;
 
 	case PHY_INTERFACE_MODE_MII:
-		ltq_etop_w32_mask(ETOP_MII_MASK,
-			ETOP_MII_NORMAL, LTQ_ETOP_CFG);
+		ltq_etop_w32_mask(ETOP_MII_MASK, ETOP_MII_NORMAL,
+				  LTQ_ETOP_CFG);
 		break;
 
 	default:
 		netdev_err(dev, "unknown mii mode %d\n",
-			priv->pldata->mii_mode);
+			   priv->pldata->mii_mode);
 		return -ENOTSUPP;
 	}
 
@@ -399,7 +399,7 @@ ltq_etop_mdio_init(struct net_device *dev)
 	priv->mii_bus->write = ltq_etop_mdio_wr;
 	priv->mii_bus->name = "ltq_mii";
 	snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
-		priv->pdev->name, priv->pdev->id);
+		 priv->pdev->name, priv->pdev->id);
 	if (mdiobus_register(priv->mii_bus)) {
 		err = -ENXIO;
 		goto err_out_free_mdiobus;
@@ -539,7 +539,7 @@ ltq_etop_set_mac_address(struct net_device *dev, void *p)
 		spin_lock_irqsave(&priv->lock, flags);
 		ltq_etop_w32(*((u32 *)dev->dev_addr), LTQ_ETOP_MAC_DA0);
 		ltq_etop_w32(*((u16 *)&dev->dev_addr[4]) << 16,
-			LTQ_ETOP_MAC_DA1);
+			     LTQ_ETOP_MAC_DA1);
 		spin_unlock_irqrestore(&priv->lock, flags);
 	}
 	return ret;
@@ -652,15 +652,15 @@ ltq_etop_probe(struct platform_device *pdev)
 	}
 
 	res = devm_request_mem_region(&pdev->dev, res->start,
-		resource_size(res), dev_name(&pdev->dev));
+				      resource_size(res), dev_name(&pdev->dev));
 	if (!res) {
 		dev_err(&pdev->dev, "failed to request etop resource\n");
 		err = -EBUSY;
 		goto err_out;
 	}
 
-	ltq_etop_membase = devm_ioremap(&pdev->dev,
-		res->start, resource_size(res));
+	ltq_etop_membase = devm_ioremap(&pdev->dev, res->start,
+					resource_size(res));
 	if (!ltq_etop_membase) {
 		dev_err(&pdev->dev, "failed to remap etop engine %d\n",
 			pdev->id);
@@ -699,10 +699,10 @@ ltq_etop_probe(struct platform_device *pdev)
 	for (i = 0; i < MAX_DMA_CHAN; i++) {
 		if (IS_TX(i))
 			netif_napi_add(dev, &priv->ch[i].napi,
-				ltq_etop_poll_tx, 8);
+				       ltq_etop_poll_tx, 8);
 		else if (IS_RX(i))
 			netif_napi_add(dev, &priv->ch[i].napi,
-				ltq_etop_poll_rx, 32);
+				       ltq_etop_poll_rx, 32);
 		priv->ch[i].netdev = dev;
 	}
 
-- 
2.30.2


             reply	other threads:[~2021-12-29 23:39 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-29 23:39 Aleksander Jan Bajkowski [this message]
2021-12-30  1:32 ` [PATCH net-next] net: lantiq_etop: make alignment match open parenthesis Joe Perches
2022-01-08 15:48   ` Aleksander Bajkowski
2021-12-30 13:30 ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211229233952.5306-1-olek2@wp.pl \
    --to=olek2@wp.pl \
    --cc=arnd@arndb.de \
    --cc=davem@davemloft.net \
    --cc=jgg@ziepe.ca \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=rdunlap@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.