From: "Belal, Awais" <Awais_Belal@mentor.com>
To: "Openembedded-core@lists.openembedded.org"
<Openembedded-core@lists.openembedded.org>
Subject: Openssl - config file not being pulled in on the install
Date: Wed, 23 Jan 2013 20:10:44 +0000 [thread overview]
Message-ID: <2021B186DC632746BD5A3CE32F12BD289FCCF37B@EU-MBX-03.mgc.mentorg.com> (raw)
[-- Attachment #1.1: Type: text/plain, Size: 793 bytes --]
Hi Guys,
This probably went un-noticed because I forgot to put a subject the first time around... my bad!
I have a question regarding openssl. The openssl.inc file under the poky package creates a -misc package which is not directly installed unless either put in RDPENEDS or RRECOMMENDS. This package (-misc) contains the openssl configuration file which is required while generating certificates on the target otherwise the command says:
WARNING: can't open config file: /usr/lib/ssl/openssl.cnf
Unable to load config info from /usr/lib/ssl/openssl.cnf
In an older version of the recipe attached here, the correct method is being (this is my understanding) to get that file in on the target while installing.
Any guidance here would be much appreciated.
BR,
Awais Belal
[-- Attachment #1.2: Type: text/html, Size: 1638 bytes --]
[-- Attachment #2: openssl.inc --]
[-- Type: application/octet-stream, Size: 3372 bytes --]
DESCRIPTION = "Secure Socket Layer (SSL) binary and related cryptographic tools."
HOMEPAGE = "http://www.openssl.org/"
LICENSE = "openssl"
SECTION = "libs/network"
SRC_URI = "http://www.openssl.org/source/openssl-${PV}.tar.gz;name=src"
S = "${WORKDIR}/openssl-${PV}"
inherit siteinfo
INC_PR = "r14"
AR_append = " r"
CFLAG = "${@base_conditional('SITEINFO_ENDIANNESS', 'le', '-DL_ENDIAN', '-DB_ENDIAN', d)} \
-DTERMIO ${FULL_OPTIMIZATION} -Wall"
# -02 does not work on mipsel: ssh hangs when it tries to read /dev/urandom
CFLAG_mtx-1 := "${@'${CFLAG}'.replace('-O2', '')}"
CFLAG_mtx-2 := "${@'${CFLAG}'.replace('-O2', '')}"
export DIRS = "crypto ssl apps"
export EX_LIBS = "-lgcc -ldl"
export AS = "${CC} -c"
PACKAGES =+ "libcrypto libssl ${PN}-misc openssl-conf"
FILES_libcrypto = "${libdir}/libcrypto.so.*"
FILES_libssl = "${libdir}/libssl.so.*"
FILES_${PN}-misc = "${libdir}/ssl/misc"
# Add the openssl.cnf file to the openssl-conf package. Make the libcrypto
# package RRECOMMENDS on this package. This will enable the configuration
# file to be installed for both the base openssl package and the libcrypto
# package since the base openssl package depends on the libcrypto package.
FILES_openssl-conf = "${libdir}/ssl/openssl.cnf"
CONFFILES_openssl-conf = "${libdir}/ssl/openssl.cnf"
RRECOMMENDS_libcrypto += "openssl-conf"
do_configure_prepend_darwin () {
sed -i -e '/version-script=openssl\.ld/d' Configure
}
do_configure () {
cd util
perl perlpath.pl ${bindir}
cd ..
ln -sf apps/openssl.pod crypto/crypto.pod ssl/ssl.pod doc/
os=${HOST_OS}
if [ `echo $os | grep -q linux; echo $?` -eq 0 ]; then
os=linux
fi
target="$os-${HOST_ARCH}"
case $target in
linux-arm)
target=linux-elf-arm
;;
linux-armeb)
target=linux-elf-armeb
;;
linux-sh3)
target=debian-sh3
;;
linux-sh4)
target=debian-sh4
;;
linux-i486)
target=debian-i386-i486
;;
linux-i586 | linux-viac3)
target=debian-i386-i586
;;
linux-i686)
target=debian-i386-i686/cmov
;;
linux-mips)
target=debian-mips
;;
linux-mipsel)
target=debian-mipsel
;;
linux-powerpc)
target=linux-ppc
;;
linux-powerpc64)
target=linux-ppc64
;;
linux-supersparc)
target=linux-sparcv8
;;
linux-sparc)
target=linux-sparcv8
;;
darwin-i386)
target=darwin-i386-cc
;;
esac
# inject machine-specific flags
sed -i -e "s|^\(\"$target\",\s*\"[^:]\+\):\([^:]\+\)|\1:${CFLAG}|g" Configure
useprefix=${prefix}
if [ "x$useprefix" = "x" ]; then
useprefix=/
fi
perl ./Configure ${EXTRA_OECONF} shared --prefix=$useprefix --openssldir=${libdir}/ssl $target
eval "${@base_contains('DISTRO_FEATURES', 'largefile', '', 'sed -i -e "/_FILE_OFFSET_BITS/,/#endif/d" ${S}/crypto/bio/bss_file.c', d)}"
eval "${@base_contains('DISTRO_FEATURES', 'ipv6', '', 'sed -i -e "/AF_INET6/,/break/d" ${S}/crypto/bio/bss_dgram.c', d)}"
}
do_compile () {
oe_runmake
}
do_install () {
oe_runmake INSTALL_PREFIX="${D}" install
# On x86_64, move lib/* to lib64
if [ "${libdir}" != "${prefix}/lib" ]
then
install -d ${D}${libdir} ${D}${libdir}/pkgconfig
mv ${D}${prefix}/lib/lib* ${D}${libdir}
mv ${D}${prefix}/lib/pkgconfig/*.pc ${D}${libdir}/pkgconfig
fi
oe_libinstall -so libcrypto ${D}${libdir}
oe_libinstall -so libssl ${D}${libdir}
install -d ${D}${includedir}
cp -L -R include/openssl ${D}${includedir}
}
next reply other threads:[~2013-01-23 20:26 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-23 20:10 Belal, Awais [this message]
2013-01-23 21:17 ` Openssl - config file not being pulled in on the install Saul Wold
2013-01-23 21:26 ` Martin Jansa
2013-01-23 21:31 ` Saul Wold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2021B186DC632746BD5A3CE32F12BD289FCCF37B@EU-MBX-03.mgc.mentorg.com \
--to=awais_belal@mentor.com \
--cc=Openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.