All of lore.kernel.org
 help / color / mirror / Atom feed
From: Michael Straube <straube.linux@gmail.com>
To: gregkh@linuxfoundation.org
Cc: Larry.Finger@lwfinger.net, phil@philpotter.co.uk,
	linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
	Michael Straube <straube.linux@gmail.com>
Subject: [PATCH v3 5/7] staging: r8188eu: remove unused fields from struct hal_data_8188e
Date: Sat,  1 Jan 2022 09:49:35 +0100	[thread overview]
Message-ID: <20220101084937.3411-6-straube.linux@gmail.com> (raw)
In-Reply-To: <20220101084937.3411-1-straube.linux@gmail.com>

Remove unused fields from struct hal_data_8188e.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
---
v3: no changes
v2: no changes

 .../staging/r8188eu/include/rtl8188e_hal.h    | 30 -------------------
 1 file changed, 30 deletions(-)

diff --git a/drivers/staging/r8188eu/include/rtl8188e_hal.h b/drivers/staging/r8188eu/include/rtl8188e_hal.h
index 40b3db34b8f2..2ce42d647a34 100644
--- a/drivers/staging/r8188eu/include/rtl8188e_hal.h
+++ b/drivers/staging/r8188eu/include/rtl8188e_hal.h
@@ -175,15 +175,9 @@ struct hal_data_8188e {
 
 	u16	BasicRateSet;
 
-	/*  EEPROM setting. */
-	u16	EEPROMSVID;
-	u16	EEPROMSDID;
 	u8	EEPROMRegulatory;
-
 	u8	EEPROMThermalMeter;
 
-	bool	EepromOrEfuse;
-
 	u8	Index24G_CCK_Base[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
 	u8	Index24G_BW40_Base[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
 	/* If only one tx, only BW20 and OFDM are used. */
@@ -192,11 +186,6 @@ struct hal_data_8188e {
 	s8	BW20_24G_Diff[RF_PATH_MAX][MAX_TX_COUNT];
 	s8	BW40_24G_Diff[RF_PATH_MAX][MAX_TX_COUNT];
 
-	u8	TxPwrLevelCck[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
-	/*  For HT 40MHZ pwr */
-	u8	TxPwrLevelHT40_1S[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
-	/*  For HT 40MHZ pwr */
-	u8	TxPwrLevelHT40_2S[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
 	/*  HT 20<->40 Pwr diff */
 	u8	TxPwrHt20Diff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
 	/*  For HT<->legacy pwr diff */
@@ -205,7 +194,6 @@ struct hal_data_8188e {
 	u8	PwrGroupHT20[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
 	u8	PwrGroupHT40[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
 
-	u8	LegacyHTTxPowerDiff;/*  Legacy to HT rate power diff */
 	/*  The current Tx Power Level */
 	u8	CurrentCckTxPwrIdx;
 	u8	CurrentOfdm24GTxPwrIdx;
@@ -213,21 +201,12 @@ struct hal_data_8188e {
 	u8	CurrentBW4024GTxPwrIdx;
 
 	/*  Read/write are allow for following hardware information variables */
-	u8	framesync;
-	u32	framesyncC34;
-	u8	framesyncMonitor;
-	u8	DefaultInitialGain[4];
 	u8	pwrGroupCnt;
 	u32	MCSTxPowerLevelOriginalOffset[MAX_PG_GROUP][16];
-	u32	CCKTxPowerLevelOriginalOffset;
 
 	u8	CrystalCap;
-	u32	AntennaTxPath;			/*  Antenna path Tx */
-	u32	AntennaRxPath;			/*  Antenna path Rx */
 	u8	ExternalPA;
 
-	u8	b1x1RecvCombine;	/*  for 1T1R receive combining */
-
 	u32	AcParam_BE; /* Original parameter for BE, use for EDCA turbo. */
 
 	struct bb_reg_def PHYRegDef[2];	/* Radio A/B */
@@ -254,17 +233,9 @@ struct hal_data_8188e {
 	u8	FwRsvdPageStartOffset; /* Reserve page start offset except
 					*  beacon in TxQ. */
 
-	/*  2010/08/09 MH Add CU power down mode. */
-	bool		pwrdown;
-
 	u8	OutEpQueueSel;
 	u8	OutEpNumber;
 
-	/*  2010/11/22 MH Add for slim combo debug mode selective. */
-	/*  This is used for fix the drawback of CU TSMC-A/UMC-A cut.
-	 * HW auto suspend ability. Close BT clock. */
-	bool		SlimComboDbg;
-
 	u16	EfuseUsedBytes;
 
 	struct P2P_PS_Offload_t	p2p_ps_offload;
@@ -280,7 +251,6 @@ struct hal_data_8188e {
 	u8	C2hArray[16];
 	u8	UsbTxAggMode;
 	u8	UsbTxAggDescNum;
-	u32	MaxUsbRxAggBlock;
 
 	enum usb_rx_agg_mode UsbRxAggMode;
 	u8	UsbRxAggBlockCount;	/*  USB Block count. Block size is
-- 
2.34.1


  parent reply	other threads:[~2022-01-01  8:49 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-01  8:49 [PATCH v3 0/7] staging: r8188eu: clean up struct hal_data_8188e Michael Straube
2022-01-01  8:49 ` [PATCH v3 1/7] staging: r8188eu: bRDGEnable is always false Michael Straube
2022-01-02 17:02   ` Martin Kaiser
2022-01-01  8:49 ` [PATCH v3 2/7] staging: r8188eu: UsbRxHighSpeedMode is set but never used Michael Straube
2022-01-02 17:06   ` Martin Kaiser
2022-01-01  8:49 ` [PATCH v3 3/7] staging: r8188eu: bTXPowerDataReadFromEEPORM " Michael Straube
2022-01-02 17:16   ` Martin Kaiser
2022-01-01  8:49 ` [PATCH v3 4/7] staging: r8188eu: bAPKThermalMeterIgnore " Michael Straube
2022-01-02 17:17   ` Martin Kaiser
2022-01-01  8:49 ` Michael Straube [this message]
2022-01-02 17:23   ` [PATCH v3 5/7] staging: r8188eu: remove unused fields from struct hal_data_8188e Martin Kaiser
2022-01-01  8:49 ` [PATCH v3 6/7] staging: r8188eu: IntArray and C2hArray are set but never used Michael Straube
2022-01-02 17:27   ` Martin Kaiser
2022-01-01  8:49 ` [PATCH v3 7/7] staging: r8188eu: FwRsvdPageStartOffset is " Michael Straube
2022-01-02 17:28   ` Martin Kaiser

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220101084937.3411-6-straube.linux@gmail.com \
    --to=straube.linux@gmail.com \
    --cc=Larry.Finger@lwfinger.net \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=phil@philpotter.co.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.