All of lore.kernel.org
 help / color / mirror / Atom feed
From: Gwendal Grignou <gwendal@chromium.org>
To: jic23@kernel.org, lars@metafoo.de
Cc: linux-iio@vger.kernel.org, Gwendal Grignou <gwendal@chromium.org>,
	Stephen Boyd <swboyd@chromium.org>
Subject: [PATCH v10 1/5] iio: sx9310: Add frequency in read_avail
Date: Sat,  1 Jan 2022 12:38:13 -0800	[thread overview]
Message-ID: <20220101203817.290512-2-gwendal@chromium.org> (raw)
In-Reply-To: <20220101203817.290512-1-gwendal@chromium.org>

Instead of using IIO_DEV_ATTR_SAMP_FREQ_AVAIL sysfs attribute,
add a _FREQ case in read_avail() to display the frequency table.
No change to |sampling_frequency_available| was observed.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
No changes in v10
No changes in v9
No changes in v8
No changes in v7
No changes in v6
No changes in v5
No changes in v4
No changes in v3
New in v2.

 drivers/iio/proximity/sx9310.c | 33 +++++++--------------------------
 1 file changed, 7 insertions(+), 26 deletions(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index a3fdb59b06d220..1647268b6471f1 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -196,6 +196,8 @@ static const struct iio_event_spec sx9310_events[] = {
 		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
 		.info_mask_separate_available =				 \
 			BIT(IIO_CHAN_INFO_HARDWAREGAIN),		 \
+		.info_mask_shared_by_all_available =			 \
+			BIT(IIO_CHAN_INFO_SAMP_FREQ),			 \
 		.indexed = 1,						 \
 		.channel = idx,						 \
 		.extend_name = name,					 \
@@ -251,22 +253,6 @@ static const unsigned int sx9310_scan_period_table[] = {
 	400, 600, 800, 1000, 2000, 3000, 4000, 5000,
 };
 
-static ssize_t sx9310_show_samp_freq_avail(struct device *dev,
-					   struct device_attribute *attr,
-					   char *buf)
-{
-	size_t len = 0;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(sx9310_samp_freq_table); i++)
-		len += scnprintf(buf + len, PAGE_SIZE - len, "%d.%d ",
-				 sx9310_samp_freq_table[i].val,
-				 sx9310_samp_freq_table[i].val2);
-	buf[len - 1] = '\n';
-	return len;
-}
-static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(sx9310_show_samp_freq_avail);
-
 static const struct regmap_range sx9310_writable_reg_ranges[] = {
 	regmap_reg_range(SX9310_REG_IRQ_MSK, SX9310_REG_IRQ_FUNC),
 	regmap_reg_range(SX9310_REG_PROX_CTRL0, SX9310_REG_PROX_CTRL19),
@@ -562,6 +548,11 @@ static int sx9310_read_avail(struct iio_dev *indio_dev,
 		*length = ARRAY_SIZE(sx9310_gain_vals);
 		*vals = sx9310_gain_vals;
 		return IIO_AVAIL_LIST;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		*length = ARRAY_SIZE(sx9310_samp_freq_table) * 2;
+		*vals = (int *)sx9310_samp_freq_table;
+		return IIO_AVAIL_LIST;
 	}
 
 	return -EINVAL;
@@ -1031,17 +1022,7 @@ static int sx9310_write_event_config(struct iio_dev *indio_dev,
 	return ret;
 }
 
-static struct attribute *sx9310_attributes[] = {
-	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
-	NULL
-};
-
-static const struct attribute_group sx9310_attribute_group = {
-	.attrs = sx9310_attributes,
-};
-
 static const struct iio_info sx9310_info = {
-	.attrs = &sx9310_attribute_group,
 	.read_raw = sx9310_read_raw,
 	.read_avail = sx9310_read_avail,
 	.read_event_value = sx9310_read_event_val,
-- 
2.34.1.448.ga2b2bfdf31-goog


  reply	other threads:[~2022-01-01 20:38 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-01 20:38 [PATCH v10 0/5] Expand Semtech SAR Sensors support Gwendal Grignou
2022-01-01 20:38 ` Gwendal Grignou [this message]
2022-01-01 20:38 ` [PATCH v10 2/5] iio: sx9310: Extract common Semtech sensor logic Gwendal Grignou
2022-01-01 20:38 ` [PATCH v10 3/5] iio: proximity: Add SX9324 support Gwendal Grignou
2022-01-09 12:19   ` Andy Shevchenko
2022-01-09 16:41     ` Jonathan Cameron
2022-01-09 12:25   ` Andy Shevchenko
2022-01-09 16:39     ` Jonathan Cameron
2022-01-09 16:47       ` Andy Shevchenko
2022-01-16 17:01         ` Jonathan Cameron
2022-01-01 20:38 ` [PATCH v10 4/5] dt-bindings: iio: Add sx9324 binding Gwendal Grignou
2022-01-01 20:38 ` [PATCH v10 5/5] iio: sx9324: Add dt_binding support Gwendal Grignou
2022-01-09 10:52 ` [PATCH v10 0/5] Expand Semtech SAR Sensors support Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220101203817.290512-2-gwendal@chromium.org \
    --to=gwendal@chromium.org \
    --cc=jic23@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.