* [PATCH v2 0/1] ALSA: hda/realtek - Fix silent output on Gigabyte X570 Aorus Master after reboot from Windows
@ 2022-01-03 14:05 ` Christian Lachner
0 siblings, 0 replies; 6+ messages in thread
From: Christian Lachner @ 2022-01-03 14:05 UTC (permalink / raw)
To: perex, tiwai, kailang; +Cc: alsa-devel, linux-kernel, Christian Lachner
This is version 2 of my patch. It implements suggestions from Takashi Iwai.
Thanks for that! Furthermore, I re-analyzed all the relevant coefs and
removed those that are not actually needed.
===
This patch addresses an issue where after rebooting from Windows into Linux
there would be no audio output.
It turns out that the Realtek Audio driver on Windows changes some coeffs
which are not being reset/reinitialized when rebooting the machine. As a
result, there is no audio output until these coeffs are being reset to
their initial state. This patch takes care of that by setting known-good
(initial) values to the coeffs.
The coeffs were collected via alsa-info, see:
broken: https://pastebin.com/4bRBSseH
working: https://pastebin.com/WUTufvZB
I also created a script which fixes the audio at runtime.
#!/bin/sh
hda-verb /dev/snd/hwC2D0 0x20 SET_COEF_INDEX 0x1a
hda-verb /dev/snd/hwC2D0 0x20 SET_PROC_COEF 0x01c1
hda-verb /dev/snd/hwC2D0 0x20 SET_COEF_INDEX 0x1b
hda-verb /dev/snd/hwC2D0 0x20 SET_PROC_COEF 0x0202
hda-verb /dev/snd/hwC2D0 0x20 SET_COEF_INDEX 0x43
hda-verb /dev/snd/hwC2D0 0x20 SET_PROC_COEF 0x3005
However, obviously, we can and should fix this in the kernel.
We initially relied upon alc1220_fixup_clevo_p950() to fix some pins in the
connection list. However, it also sets coef 0x7 which does not need to be
touched. Furthermore, to prevent mixing device-specific quirks I introduced
a new alc1220_fixup_gb_x570() which is heavily based on
alc1220_fixup_clevo_p950() but does not set coeff 0x7 and fixes the coeffs
that are actually needed instead.
This new alc1220_fixup_gb_x570() is believed to also work for other boards,
like the Gigabyte X570 Aorus Extreme and the newer Gigabyte Aorus X570S
Master. However, as there is no way for me to test these I initially only
enable this new behaviour for the mainboard I have which is the Gigabyte
X570(non-S) Aorus Master.
I tested this patch on the 5.15 branch as well as on master and it is
working well for me.
Christian Lachner (1):
ALSA: hda/realtek - Fix silent output on Gigabyte X570 Aorus Master
after reboot from Windows
sound/pci/hda/patch_realtek.c | 30 +++++++++++++++++++++++++++++-
1 file changed, 29 insertions(+), 1 deletion(-)
--
2.34.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v2 0/1] ALSA: hda/realtek - Fix silent output on Gigabyte X570 Aorus Master after reboot from Windows
@ 2022-01-03 14:05 ` Christian Lachner
0 siblings, 0 replies; 6+ messages in thread
From: Christian Lachner @ 2022-01-03 14:05 UTC (permalink / raw)
To: perex, tiwai, kailang; +Cc: Christian Lachner, alsa-devel, linux-kernel
This is version 2 of my patch. It implements suggestions from Takashi Iwai.
Thanks for that! Furthermore, I re-analyzed all the relevant coefs and
removed those that are not actually needed.
===
This patch addresses an issue where after rebooting from Windows into Linux
there would be no audio output.
It turns out that the Realtek Audio driver on Windows changes some coeffs
which are not being reset/reinitialized when rebooting the machine. As a
result, there is no audio output until these coeffs are being reset to
their initial state. This patch takes care of that by setting known-good
(initial) values to the coeffs.
The coeffs were collected via alsa-info, see:
broken: https://pastebin.com/4bRBSseH
working: https://pastebin.com/WUTufvZB
I also created a script which fixes the audio at runtime.
#!/bin/sh
hda-verb /dev/snd/hwC2D0 0x20 SET_COEF_INDEX 0x1a
hda-verb /dev/snd/hwC2D0 0x20 SET_PROC_COEF 0x01c1
hda-verb /dev/snd/hwC2D0 0x20 SET_COEF_INDEX 0x1b
hda-verb /dev/snd/hwC2D0 0x20 SET_PROC_COEF 0x0202
hda-verb /dev/snd/hwC2D0 0x20 SET_COEF_INDEX 0x43
hda-verb /dev/snd/hwC2D0 0x20 SET_PROC_COEF 0x3005
However, obviously, we can and should fix this in the kernel.
We initially relied upon alc1220_fixup_clevo_p950() to fix some pins in the
connection list. However, it also sets coef 0x7 which does not need to be
touched. Furthermore, to prevent mixing device-specific quirks I introduced
a new alc1220_fixup_gb_x570() which is heavily based on
alc1220_fixup_clevo_p950() but does not set coeff 0x7 and fixes the coeffs
that are actually needed instead.
This new alc1220_fixup_gb_x570() is believed to also work for other boards,
like the Gigabyte X570 Aorus Extreme and the newer Gigabyte Aorus X570S
Master. However, as there is no way for me to test these I initially only
enable this new behaviour for the mainboard I have which is the Gigabyte
X570(non-S) Aorus Master.
I tested this patch on the 5.15 branch as well as on master and it is
working well for me.
Christian Lachner (1):
ALSA: hda/realtek - Fix silent output on Gigabyte X570 Aorus Master
after reboot from Windows
sound/pci/hda/patch_realtek.c | 30 +++++++++++++++++++++++++++++-
1 file changed, 29 insertions(+), 1 deletion(-)
--
2.34.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v2 1/1] ALSA: hda/realtek - Fix silent output on Gigabyte X570 Aorus Master after reboot from Windows
2022-01-03 14:05 ` Christian Lachner
@ 2022-01-03 14:05 ` Christian Lachner
-1 siblings, 0 replies; 6+ messages in thread
From: Christian Lachner @ 2022-01-03 14:05 UTC (permalink / raw)
To: perex, tiwai, kailang; +Cc: alsa-devel, linux-kernel, Christian Lachner
This patch addresses an issue where after rebooting from Windows into Linux
there would be no audio output.
It turns out that the Realtek Audio driver on Windows changes some coeffs
which are not being reset/reinitialized when rebooting the machine. As a
result, there is no audio output until these coeffs are being reset to
their initial state. This patch takes care of that by setting known-good
(initial) values to the coeffs.
We initially relied upon alc1220_fixup_clevo_p950() to fix some pins in the
connection list. However, it also sets coef 0x7 which does not need to be
touched. Furthermore, to prevent mixing device-specific quirks I introduced
a new alc1220_fixup_gb_x570() which is heavily based on
alc1220_fixup_clevo_p950() but does not set coeff 0x7 and fixes the coeffs
that are actually needed instead.
This new alc1220_fixup_gb_x570() is believed to also work for other boards,
like the Gigabyte X570 Aorus Extreme and the newer Gigabyte Aorus X570S
Master. However, as there is no way for me to test these I initially only
enable this new behaviour for the mainboard I have which is the Gigabyte
X570(non-S) Aorus Master.
I tested this patch on the 5.15 branch as well as on master and it is
working well for me.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205275
Signed-off-by: Christian Lachner <gladiac@gmail.com>
---
sound/pci/hda/patch_realtek.c | 30 +++++++++++++++++++++++++++++-
1 file changed, 29 insertions(+), 1 deletion(-)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 28255e752c4a..b56d7e8f236b 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -1924,6 +1924,7 @@ enum {
ALC887_FIXUP_ASUS_BASS,
ALC887_FIXUP_BASS_CHMAP,
ALC1220_FIXUP_GB_DUAL_CODECS,
+ ALC1220_FIXUP_GB_X570,
ALC1220_FIXUP_CLEVO_P950,
ALC1220_FIXUP_CLEVO_PB51ED,
ALC1220_FIXUP_CLEVO_PB51ED_PINS,
@@ -2113,6 +2114,29 @@ static void alc1220_fixup_gb_dual_codecs(struct hda_codec *codec,
}
}
+static void alc1220_fixup_gb_x570(struct hda_codec *codec,
+ const struct hda_fixup *fix,
+ int action)
+{
+ static const hda_nid_t conn1[] = { 0x0c };
+ static const struct coef_fw gb_x570_coefs[] = {
+ WRITE_COEF(0x1a, 0x01c1),
+ WRITE_COEF(0x1b, 0x0202),
+ WRITE_COEF(0x43, 0x3005),
+ {}
+ };
+
+ switch (action) {
+ case HDA_FIXUP_ACT_PRE_PROBE:
+ snd_hda_override_conn_list(codec, 0x14, ARRAY_SIZE(conn1), conn1);
+ snd_hda_override_conn_list(codec, 0x1b, ARRAY_SIZE(conn1), conn1);
+ break;
+ case HDA_FIXUP_ACT_INIT:
+ alc_process_coef_fw(codec, gb_x570_coefs);
+ break;
+ }
+}
+
static void alc1220_fixup_clevo_p950(struct hda_codec *codec,
const struct hda_fixup *fix,
int action)
@@ -2415,6 +2439,10 @@ static const struct hda_fixup alc882_fixups[] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc1220_fixup_gb_dual_codecs,
},
+ [ALC1220_FIXUP_GB_X570] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc1220_fixup_gb_x570,
+ },
[ALC1220_FIXUP_CLEVO_P950] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc1220_fixup_clevo_p950,
@@ -2517,7 +2545,7 @@ static const struct snd_pci_quirk alc882_fixup_tbl[] = {
SND_PCI_QUIRK(0x13fe, 0x1009, "Advantech MIT-W101", ALC886_FIXUP_EAPD),
SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte EP45-DS3/Z87X-UD3H", ALC889_FIXUP_FRONT_HP_NO_PRESENCE),
SND_PCI_QUIRK(0x1458, 0xa0b8, "Gigabyte AZ370-Gaming", ALC1220_FIXUP_GB_DUAL_CODECS),
- SND_PCI_QUIRK(0x1458, 0xa0cd, "Gigabyte X570 Aorus Master", ALC1220_FIXUP_CLEVO_P950),
+ SND_PCI_QUIRK(0x1458, 0xa0cd, "Gigabyte X570 Aorus Master", ALC1220_FIXUP_GB_X570),
SND_PCI_QUIRK(0x1458, 0xa0ce, "Gigabyte X570 Aorus Xtreme", ALC1220_FIXUP_CLEVO_P950),
SND_PCI_QUIRK(0x1462, 0x11f7, "MSI-GE63", ALC1220_FIXUP_CLEVO_P950),
SND_PCI_QUIRK(0x1462, 0x1228, "MSI-GP63", ALC1220_FIXUP_CLEVO_P950),
--
2.34.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 1/1] ALSA: hda/realtek - Fix silent output on Gigabyte X570 Aorus Master after reboot from Windows
@ 2022-01-03 14:05 ` Christian Lachner
0 siblings, 0 replies; 6+ messages in thread
From: Christian Lachner @ 2022-01-03 14:05 UTC (permalink / raw)
To: perex, tiwai, kailang; +Cc: Christian Lachner, alsa-devel, linux-kernel
This patch addresses an issue where after rebooting from Windows into Linux
there would be no audio output.
It turns out that the Realtek Audio driver on Windows changes some coeffs
which are not being reset/reinitialized when rebooting the machine. As a
result, there is no audio output until these coeffs are being reset to
their initial state. This patch takes care of that by setting known-good
(initial) values to the coeffs.
We initially relied upon alc1220_fixup_clevo_p950() to fix some pins in the
connection list. However, it also sets coef 0x7 which does not need to be
touched. Furthermore, to prevent mixing device-specific quirks I introduced
a new alc1220_fixup_gb_x570() which is heavily based on
alc1220_fixup_clevo_p950() but does not set coeff 0x7 and fixes the coeffs
that are actually needed instead.
This new alc1220_fixup_gb_x570() is believed to also work for other boards,
like the Gigabyte X570 Aorus Extreme and the newer Gigabyte Aorus X570S
Master. However, as there is no way for me to test these I initially only
enable this new behaviour for the mainboard I have which is the Gigabyte
X570(non-S) Aorus Master.
I tested this patch on the 5.15 branch as well as on master and it is
working well for me.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205275
Signed-off-by: Christian Lachner <gladiac@gmail.com>
---
sound/pci/hda/patch_realtek.c | 30 +++++++++++++++++++++++++++++-
1 file changed, 29 insertions(+), 1 deletion(-)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 28255e752c4a..b56d7e8f236b 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -1924,6 +1924,7 @@ enum {
ALC887_FIXUP_ASUS_BASS,
ALC887_FIXUP_BASS_CHMAP,
ALC1220_FIXUP_GB_DUAL_CODECS,
+ ALC1220_FIXUP_GB_X570,
ALC1220_FIXUP_CLEVO_P950,
ALC1220_FIXUP_CLEVO_PB51ED,
ALC1220_FIXUP_CLEVO_PB51ED_PINS,
@@ -2113,6 +2114,29 @@ static void alc1220_fixup_gb_dual_codecs(struct hda_codec *codec,
}
}
+static void alc1220_fixup_gb_x570(struct hda_codec *codec,
+ const struct hda_fixup *fix,
+ int action)
+{
+ static const hda_nid_t conn1[] = { 0x0c };
+ static const struct coef_fw gb_x570_coefs[] = {
+ WRITE_COEF(0x1a, 0x01c1),
+ WRITE_COEF(0x1b, 0x0202),
+ WRITE_COEF(0x43, 0x3005),
+ {}
+ };
+
+ switch (action) {
+ case HDA_FIXUP_ACT_PRE_PROBE:
+ snd_hda_override_conn_list(codec, 0x14, ARRAY_SIZE(conn1), conn1);
+ snd_hda_override_conn_list(codec, 0x1b, ARRAY_SIZE(conn1), conn1);
+ break;
+ case HDA_FIXUP_ACT_INIT:
+ alc_process_coef_fw(codec, gb_x570_coefs);
+ break;
+ }
+}
+
static void alc1220_fixup_clevo_p950(struct hda_codec *codec,
const struct hda_fixup *fix,
int action)
@@ -2415,6 +2439,10 @@ static const struct hda_fixup alc882_fixups[] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc1220_fixup_gb_dual_codecs,
},
+ [ALC1220_FIXUP_GB_X570] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc1220_fixup_gb_x570,
+ },
[ALC1220_FIXUP_CLEVO_P950] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc1220_fixup_clevo_p950,
@@ -2517,7 +2545,7 @@ static const struct snd_pci_quirk alc882_fixup_tbl[] = {
SND_PCI_QUIRK(0x13fe, 0x1009, "Advantech MIT-W101", ALC886_FIXUP_EAPD),
SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte EP45-DS3/Z87X-UD3H", ALC889_FIXUP_FRONT_HP_NO_PRESENCE),
SND_PCI_QUIRK(0x1458, 0xa0b8, "Gigabyte AZ370-Gaming", ALC1220_FIXUP_GB_DUAL_CODECS),
- SND_PCI_QUIRK(0x1458, 0xa0cd, "Gigabyte X570 Aorus Master", ALC1220_FIXUP_CLEVO_P950),
+ SND_PCI_QUIRK(0x1458, 0xa0cd, "Gigabyte X570 Aorus Master", ALC1220_FIXUP_GB_X570),
SND_PCI_QUIRK(0x1458, 0xa0ce, "Gigabyte X570 Aorus Xtreme", ALC1220_FIXUP_CLEVO_P950),
SND_PCI_QUIRK(0x1462, 0x11f7, "MSI-GE63", ALC1220_FIXUP_CLEVO_P950),
SND_PCI_QUIRK(0x1462, 0x1228, "MSI-GP63", ALC1220_FIXUP_CLEVO_P950),
--
2.34.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v2 1/1] ALSA: hda/realtek - Fix silent output on Gigabyte X570 Aorus Master after reboot from Windows
2022-01-03 14:05 ` Christian Lachner
@ 2022-01-03 14:19 ` Takashi Iwai
-1 siblings, 0 replies; 6+ messages in thread
From: Takashi Iwai @ 2022-01-03 14:19 UTC (permalink / raw)
To: Christian Lachner; +Cc: perex, tiwai, kailang, alsa-devel, linux-kernel
On Mon, 03 Jan 2022 15:05:17 +0100,
Christian Lachner wrote:
>
> This patch addresses an issue where after rebooting from Windows into Linux
> there would be no audio output.
>
> It turns out that the Realtek Audio driver on Windows changes some coeffs
> which are not being reset/reinitialized when rebooting the machine. As a
> result, there is no audio output until these coeffs are being reset to
> their initial state. This patch takes care of that by setting known-good
> (initial) values to the coeffs.
>
> We initially relied upon alc1220_fixup_clevo_p950() to fix some pins in the
> connection list. However, it also sets coef 0x7 which does not need to be
> touched. Furthermore, to prevent mixing device-specific quirks I introduced
> a new alc1220_fixup_gb_x570() which is heavily based on
> alc1220_fixup_clevo_p950() but does not set coeff 0x7 and fixes the coeffs
> that are actually needed instead.
>
> This new alc1220_fixup_gb_x570() is believed to also work for other boards,
> like the Gigabyte X570 Aorus Extreme and the newer Gigabyte Aorus X570S
> Master. However, as there is no way for me to test these I initially only
> enable this new behaviour for the mainboard I have which is the Gigabyte
> X570(non-S) Aorus Master.
>
> I tested this patch on the 5.15 branch as well as on master and it is
> working well for me.
>
> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205275
> Signed-off-by: Christian Lachner <gladiac@gmail.com>
Thanks, applied now (with Cc-to-stable and Fixes tag).
Takashi
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2 1/1] ALSA: hda/realtek - Fix silent output on Gigabyte X570 Aorus Master after reboot from Windows
@ 2022-01-03 14:19 ` Takashi Iwai
0 siblings, 0 replies; 6+ messages in thread
From: Takashi Iwai @ 2022-01-03 14:19 UTC (permalink / raw)
To: Christian Lachner; +Cc: linux-kernel, alsa-devel, kailang, tiwai
On Mon, 03 Jan 2022 15:05:17 +0100,
Christian Lachner wrote:
>
> This patch addresses an issue where after rebooting from Windows into Linux
> there would be no audio output.
>
> It turns out that the Realtek Audio driver on Windows changes some coeffs
> which are not being reset/reinitialized when rebooting the machine. As a
> result, there is no audio output until these coeffs are being reset to
> their initial state. This patch takes care of that by setting known-good
> (initial) values to the coeffs.
>
> We initially relied upon alc1220_fixup_clevo_p950() to fix some pins in the
> connection list. However, it also sets coef 0x7 which does not need to be
> touched. Furthermore, to prevent mixing device-specific quirks I introduced
> a new alc1220_fixup_gb_x570() which is heavily based on
> alc1220_fixup_clevo_p950() but does not set coeff 0x7 and fixes the coeffs
> that are actually needed instead.
>
> This new alc1220_fixup_gb_x570() is believed to also work for other boards,
> like the Gigabyte X570 Aorus Extreme and the newer Gigabyte Aorus X570S
> Master. However, as there is no way for me to test these I initially only
> enable this new behaviour for the mainboard I have which is the Gigabyte
> X570(non-S) Aorus Master.
>
> I tested this patch on the 5.15 branch as well as on master and it is
> working well for me.
>
> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205275
> Signed-off-by: Christian Lachner <gladiac@gmail.com>
Thanks, applied now (with Cc-to-stable and Fixes tag).
Takashi
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-01-03 14:20 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-01-03 14:05 [PATCH v2 0/1] ALSA: hda/realtek - Fix silent output on Gigabyte X570 Aorus Master after reboot from Windows Christian Lachner
2022-01-03 14:05 ` Christian Lachner
2022-01-03 14:05 ` [PATCH v2 1/1] " Christian Lachner
2022-01-03 14:05 ` Christian Lachner
2022-01-03 14:19 ` Takashi Iwai
2022-01-03 14:19 ` Takashi Iwai
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.