All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marc Kleine-Budde <mkl@pengutronix.de>
To: linux-can@vger.kernel.org
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
	Thomas Kopp <thomas.kopp@microchip.com>,
	Marc Kleine-Budde <mkl@pengutronix.de>
Subject: [PATCH 11/13] can: mcp251xfd: move chip FIFO init into separate file
Date: Wed,  5 Jan 2022 16:42:58 +0100	[thread overview]
Message-ID: <20220105154300.1258636-12-mkl@pengutronix.de> (raw)
In-Reply-To: <20220105154300.1258636-1-mkl@pengutronix.de>

This patch moves the chip FIFO initialization from the mcp251xfd core
file into a separate one to make the driver a bit more orderly.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/spi/mcp251xfd/Makefile        |   1 +
 .../can/spi/mcp251xfd/mcp251xfd-chip-fifo.c   | 119 ++++++++++++++++++
 .../net/can/spi/mcp251xfd/mcp251xfd-core.c    | 102 ---------------
 drivers/net/can/spi/mcp251xfd/mcp251xfd.h     |   1 +
 4 files changed, 121 insertions(+), 102 deletions(-)
 create mode 100644 drivers/net/can/spi/mcp251xfd/mcp251xfd-chip-fifo.c

diff --git a/drivers/net/can/spi/mcp251xfd/Makefile b/drivers/net/can/spi/mcp251xfd/Makefile
index 801367e98c54..6de680e7ea50 100644
--- a/drivers/net/can/spi/mcp251xfd/Makefile
+++ b/drivers/net/can/spi/mcp251xfd/Makefile
@@ -3,6 +3,7 @@
 obj-$(CONFIG_CAN_MCP251XFD) += mcp251xfd.o
 
 mcp251xfd-objs :=
+mcp251xfd-objs += mcp251xfd-chip-fifo.o
 mcp251xfd-objs += mcp251xfd-core.o
 mcp251xfd-objs += mcp251xfd-crc16.o
 mcp251xfd-objs += mcp251xfd-regmap.o
diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-chip-fifo.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-chip-fifo.c
new file mode 100644
index 000000000000..ce94dd744a93
--- /dev/null
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-chip-fifo.c
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// mcp251xfd - Microchip MCP251xFD Family CAN controller driver
+//
+// Copyright (c) 2019, 2020, 2021 Pengutronix,
+//               Marc Kleine-Budde <kernel@pengutronix.de>
+//
+// Based on:
+//
+// CAN bus driver for Microchip 25XXFD CAN Controller with SPI Interface
+//
+// Copyright (c) 2019 Martin Sperl <kernel@martin.sperl.org>
+//
+
+#include <linux/bitfield.h>
+
+#include "mcp251xfd.h"
+
+static int
+mcp251xfd_chip_rx_fifo_init_one(const struct mcp251xfd_priv *priv,
+				const struct mcp251xfd_rx_ring *ring)
+{
+	u32 fifo_con;
+
+	/* Enable RXOVIE on _all_ RX FIFOs, not just the last one.
+	 *
+	 * FIFOs hit by a RX MAB overflow and RXOVIE enabled will
+	 * generate a RXOVIF, use this to properly detect RX MAB
+	 * overflows.
+	 */
+	fifo_con = FIELD_PREP(MCP251XFD_REG_FIFOCON_FSIZE_MASK,
+			      ring->obj_num - 1) |
+		MCP251XFD_REG_FIFOCON_RXTSEN |
+		MCP251XFD_REG_FIFOCON_RXOVIE |
+		MCP251XFD_REG_FIFOCON_TFNRFNIE;
+
+	if (priv->can.ctrlmode & (CAN_CTRLMODE_LISTENONLY | CAN_CTRLMODE_FD))
+		fifo_con |= FIELD_PREP(MCP251XFD_REG_FIFOCON_PLSIZE_MASK,
+				       MCP251XFD_REG_FIFOCON_PLSIZE_64);
+	else
+		fifo_con |= FIELD_PREP(MCP251XFD_REG_FIFOCON_PLSIZE_MASK,
+				       MCP251XFD_REG_FIFOCON_PLSIZE_8);
+
+	return regmap_write(priv->map_reg,
+			    MCP251XFD_REG_FIFOCON(ring->fifo_nr), fifo_con);
+}
+
+static int
+mcp251xfd_chip_rx_filter_init_one(const struct mcp251xfd_priv *priv,
+				  const struct mcp251xfd_rx_ring *ring)
+{
+	u32 fltcon;
+
+	fltcon = MCP251XFD_REG_FLTCON_FLTEN(ring->nr) |
+		MCP251XFD_REG_FLTCON_FBP(ring->nr, ring->fifo_nr);
+
+	return regmap_update_bits(priv->map_reg,
+				  MCP251XFD_REG_FLTCON(ring->nr >> 2),
+				  MCP251XFD_REG_FLTCON_FLT_MASK(ring->nr),
+				  fltcon);
+}
+
+int mcp251xfd_chip_fifo_init(const struct mcp251xfd_priv *priv)
+{
+	const struct mcp251xfd_tx_ring *tx_ring = priv->tx;
+	const struct mcp251xfd_rx_ring *rx_ring;
+	u32 val;
+	int err, n;
+
+	/* TEF */
+	val = FIELD_PREP(MCP251XFD_REG_TEFCON_FSIZE_MASK,
+			 tx_ring->obj_num - 1) |
+		MCP251XFD_REG_TEFCON_TEFTSEN |
+		MCP251XFD_REG_TEFCON_TEFOVIE |
+		MCP251XFD_REG_TEFCON_TEFNEIE;
+
+	err = regmap_write(priv->map_reg, MCP251XFD_REG_TEFCON, val);
+	if (err)
+		return err;
+
+	/* FIFO 1 - TX */
+	val = FIELD_PREP(MCP251XFD_REG_FIFOCON_FSIZE_MASK,
+			 tx_ring->obj_num - 1) |
+		MCP251XFD_REG_FIFOCON_TXEN |
+		MCP251XFD_REG_FIFOCON_TXATIE;
+
+	if (priv->can.ctrlmode & (CAN_CTRLMODE_LISTENONLY | CAN_CTRLMODE_FD))
+		val |= FIELD_PREP(MCP251XFD_REG_FIFOCON_PLSIZE_MASK,
+				  MCP251XFD_REG_FIFOCON_PLSIZE_64);
+	else
+		val |= FIELD_PREP(MCP251XFD_REG_FIFOCON_PLSIZE_MASK,
+				  MCP251XFD_REG_FIFOCON_PLSIZE_8);
+
+	if (priv->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT)
+		val |= FIELD_PREP(MCP251XFD_REG_FIFOCON_TXAT_MASK,
+				  MCP251XFD_REG_FIFOCON_TXAT_ONE_SHOT);
+	else
+		val |= FIELD_PREP(MCP251XFD_REG_FIFOCON_TXAT_MASK,
+				  MCP251XFD_REG_FIFOCON_TXAT_UNLIMITED);
+
+	err = regmap_write(priv->map_reg,
+			   MCP251XFD_REG_FIFOCON(MCP251XFD_TX_FIFO),
+			   val);
+	if (err)
+		return err;
+
+	/* RX FIFOs */
+	mcp251xfd_for_each_rx_ring(priv, rx_ring, n) {
+		err = mcp251xfd_chip_rx_fifo_init_one(priv, rx_ring);
+		if (err)
+			return err;
+
+		err = mcp251xfd_chip_rx_filter_init_one(priv, rx_ring);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
index 65803b9fe2a2..f7326c1b1723 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
@@ -767,108 +767,6 @@ static int mcp251xfd_chip_rx_int_disable(const struct mcp251xfd_priv *priv)
 	return regmap_write(priv->map_reg, MCP251XFD_REG_IOCON, val);
 }
 
-static int
-mcp251xfd_chip_rx_fifo_init_one(const struct mcp251xfd_priv *priv,
-				const struct mcp251xfd_rx_ring *ring)
-{
-	u32 fifo_con;
-
-	/* Enable RXOVIE on _all_ RX FIFOs, not just the last one.
-	 *
-	 * FIFOs hit by a RX MAB overflow and RXOVIE enabled will
-	 * generate a RXOVIF, use this to properly detect RX MAB
-	 * overflows.
-	 */
-	fifo_con = FIELD_PREP(MCP251XFD_REG_FIFOCON_FSIZE_MASK,
-			      ring->obj_num - 1) |
-		MCP251XFD_REG_FIFOCON_RXTSEN |
-		MCP251XFD_REG_FIFOCON_RXOVIE |
-		MCP251XFD_REG_FIFOCON_TFNRFNIE;
-
-	if (priv->can.ctrlmode & (CAN_CTRLMODE_LISTENONLY | CAN_CTRLMODE_FD))
-		fifo_con |= FIELD_PREP(MCP251XFD_REG_FIFOCON_PLSIZE_MASK,
-				       MCP251XFD_REG_FIFOCON_PLSIZE_64);
-	else
-		fifo_con |= FIELD_PREP(MCP251XFD_REG_FIFOCON_PLSIZE_MASK,
-				       MCP251XFD_REG_FIFOCON_PLSIZE_8);
-
-	return regmap_write(priv->map_reg,
-			    MCP251XFD_REG_FIFOCON(ring->fifo_nr), fifo_con);
-}
-
-static int
-mcp251xfd_chip_rx_filter_init_one(const struct mcp251xfd_priv *priv,
-				  const struct mcp251xfd_rx_ring *ring)
-{
-	u32 fltcon;
-
-	fltcon = MCP251XFD_REG_FLTCON_FLTEN(ring->nr) |
-		MCP251XFD_REG_FLTCON_FBP(ring->nr, ring->fifo_nr);
-
-	return regmap_update_bits(priv->map_reg,
-				  MCP251XFD_REG_FLTCON(ring->nr >> 2),
-				  MCP251XFD_REG_FLTCON_FLT_MASK(ring->nr),
-				  fltcon);
-}
-
-static int mcp251xfd_chip_fifo_init(const struct mcp251xfd_priv *priv)
-{
-	const struct mcp251xfd_tx_ring *tx_ring = priv->tx;
-	const struct mcp251xfd_rx_ring *rx_ring;
-	u32 val;
-	int err, n;
-
-	/* TEF */
-	val = FIELD_PREP(MCP251XFD_REG_TEFCON_FSIZE_MASK,
-			 tx_ring->obj_num - 1) |
-		MCP251XFD_REG_TEFCON_TEFTSEN |
-		MCP251XFD_REG_TEFCON_TEFOVIE |
-		MCP251XFD_REG_TEFCON_TEFNEIE;
-
-	err = regmap_write(priv->map_reg, MCP251XFD_REG_TEFCON, val);
-	if (err)
-		return err;
-
-	/* FIFO 1 - TX */
-	val = FIELD_PREP(MCP251XFD_REG_FIFOCON_FSIZE_MASK,
-			 tx_ring->obj_num - 1) |
-		MCP251XFD_REG_FIFOCON_TXEN |
-		MCP251XFD_REG_FIFOCON_TXATIE;
-
-	if (priv->can.ctrlmode & (CAN_CTRLMODE_LISTENONLY | CAN_CTRLMODE_FD))
-		val |= FIELD_PREP(MCP251XFD_REG_FIFOCON_PLSIZE_MASK,
-				  MCP251XFD_REG_FIFOCON_PLSIZE_64);
-	else
-		val |= FIELD_PREP(MCP251XFD_REG_FIFOCON_PLSIZE_MASK,
-				  MCP251XFD_REG_FIFOCON_PLSIZE_8);
-
-	if (priv->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT)
-		val |= FIELD_PREP(MCP251XFD_REG_FIFOCON_TXAT_MASK,
-				  MCP251XFD_REG_FIFOCON_TXAT_ONE_SHOT);
-	else
-		val |= FIELD_PREP(MCP251XFD_REG_FIFOCON_TXAT_MASK,
-				  MCP251XFD_REG_FIFOCON_TXAT_UNLIMITED);
-
-	err = regmap_write(priv->map_reg,
-			   MCP251XFD_REG_FIFOCON(MCP251XFD_TX_FIFO),
-			   val);
-	if (err)
-		return err;
-
-	/* RX FIFOs */
-	mcp251xfd_for_each_rx_ring(priv, rx_ring, n) {
-		err = mcp251xfd_chip_rx_fifo_init_one(priv, rx_ring);
-		if (err)
-			return err;
-
-		err = mcp251xfd_chip_rx_filter_init_one(priv, rx_ring);
-		if (err)
-			return err;
-	}
-
-	return 0;
-}
-
 static int mcp251xfd_chip_ecc_init(struct mcp251xfd_priv *priv)
 {
 	struct mcp251xfd_ecc *ecc = &priv->ecc;
diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd.h b/drivers/net/can/spi/mcp251xfd/mcp251xfd.h
index 22a18d6fbda4..69220de0e413 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd.h
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd.h
@@ -868,6 +868,7 @@ mcp251xfd_get_rx_linear_len(const struct mcp251xfd_rx_ring *ring)
 	     (n) < (priv)->rx_ring_num; \
 	     (n)++, (ring) = *((priv)->rx + (n)))
 
+int mcp251xfd_chip_fifo_init(const struct mcp251xfd_priv *priv);
 u16 mcp251xfd_crc16_compute2(const void *cmd, size_t cmd_size,
 			     const void *data, size_t data_size);
 u16 mcp251xfd_crc16_compute(const void *data, size_t data_size);
-- 
2.34.1



  parent reply	other threads:[~2022-01-05 15:43 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-05 15:42 [PATCH 00/13] can: mcp251xfd: cleanups and preparation to improve FIFO handling Marc Kleine-Budde
2022-01-05 15:42 ` [PATCH 01/13] can: mcp251xfd: remove double blank lines Marc Kleine-Budde
2022-01-05 15:42 ` [PATCH 02/13] can: mcp251xfd: mcp251xfd_tef_obj_read(): fix typo in error message Marc Kleine-Budde
2022-01-05 15:42 ` [PATCH 03/13] can: mcp251xfd: add missing newline to printed strings Marc Kleine-Budde
2022-01-05 15:42 ` [PATCH 04/13] can: mcp251xfd: mcp251xfd_open(): open_candev() first Marc Kleine-Budde
2022-01-05 15:42 ` [PATCH 05/13] can: mcp251xfd: mcp251xfd_open(): make use of pm_runtime_resume_and_get() Marc Kleine-Budde
2022-01-05 15:42 ` [PATCH 06/13] can: mcp251xfd: mcp251xfd_handle_rxovif(): denote RX overflow message to debug + add rate limiting Marc Kleine-Budde
2022-01-05 15:42 ` [PATCH 07/13] can: mcp251xfd: mcp251xfd.h: sort function prototypes Marc Kleine-Budde
2022-01-05 15:42 ` [PATCH 08/13] can: mcp251xfd: move RX handling into separate file Marc Kleine-Budde
2022-01-05 15:42 ` [PATCH 09/13] can: mcp251xfd: move TX " Marc Kleine-Budde
2022-01-05 15:42 ` [PATCH 10/13] can: mcp251xfd: move TEF " Marc Kleine-Budde
2022-01-05 15:42 ` Marc Kleine-Budde [this message]
2022-01-05 15:42 ` [PATCH 12/13] can: mcp251xfd: move ring init into separate function Marc Kleine-Budde
2022-01-05 15:43 ` [PATCH 13/13] can: mcp251xfd: introduce and make use of mcp251xfd_is_fd_mode() Marc Kleine-Budde

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220105154300.1258636-12-mkl@pengutronix.de \
    --to=mkl@pengutronix.de \
    --cc=linux-can@vger.kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=thomas.kopp@microchip.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.