[wpan-next v2 00/27] IEEE 802.15.4 scan support

[Miquel Raynal <miquel.raynal@bootlin.com>]

Hello,

Here is a series attempting to bring support for scans in the
IEEE 802.15.4 stack. A second series follows in order to align the
tooling with these changes, bringing support for a number of new
features such as:

* Sending (or stopping) beacons. Intervals ranging from 0 to 14 are
  valid for passively sending beacons at regular intervals. An interval
  of 15 would request the core to answer to received BEACON_REQ.
  # iwpan dev wpan0 beacons send interval 2 # send BEACON at a fixed rate
  # iwpan dev wpan0 beacons send interval 15 # answer BEACON_REQ only
  # iwpan dev wpan0 beacons stop # apply to both cases

* Scanning all the channels or only a subset:
  # iwpan dev wpan1 scan type passive duration 3 # will not trigger BEACON_REQ
  # iwpan dev wpan1 scan type active duration 3 # will trigger BEACON_REQ

* If a beacon is received during a scan, the internal PAN list is
  updated and can be dumped, flushed and configured with:
  # iwpan dev wpan1 pans dump
  PAN 0xffff (on wpan1)
      coordinator 0x2efefdd4cdbf9330
      page 0
      channel 13
      superframe spec. 0xcf22
      LQI 0
      seen 7156ms ago
  # iwpan dev wpan1 pans flush
  # iwpan dev wpan1 set max_pan_entries 100
  # iwpan dev wpan1 set pans_expiration 3600

* It is also possible to monitor the events with:
  # iwpan event

* As well as triggering a non blocking scan:
  # iwpan dev wpan1 scan trigger type passive duration 3
  # iwpan dev wpan1 scan done
  # iwpan dev wpan1 scan abort

The PAN list gets automatically updated by dropping the expired PANs
each time the user requests access to the list.

Internally, both requests (scan/beacons) are handled periodically by
delayed workqueues when relevant.

So far the only technical point that is missing in this series is the
possibility to grab a reference over the module driving the net device
in order to prevent module unloading during a scan or when the beacons
work is ongoing.

Finally, this series is a deep reshuffle of David Girault's original
work, hence the fact that he is almost systematically credited, either
by being the only author when I created the patches based on his changes
with almost no modification, or with a Co-developped-by tag whenever the
final code base is significantly different than his first proposal while
still being greatly inspired from it.

Cheers,
Miquèl

Changes in v2:
* Create two new netlink commands to set the maximum number of PANs that
  can be listed as well as their expiration time (in seconds).
* Added a patch to the series to avoid ignoring bad frames in hwsim as
  requested by Alexander.
* Changed the symbol duration type to receive nanoseconds instead of
  microseconds.
* Dropped most of the hwsim patches and reworked how drivers advertise
  their channels in order to be capable of deriving the symbol durations
  automatically.
* The scanning boolean gets turned into an atomic.
* The ca8210 driver does not support scanning, implement the driver
  hooks to reflect the situation.
* Reworked a bit the content of each patch to ease the introduction of
  active scans. 
* Added active scan support.

David Girault (5):
  net: ieee802154: Move IEEE 802.15.4 Kconfig main entry
  net: mac802154: Include the softMAC stack inside the IEEE 802.15.4
    menu
  net: ieee802154: Move the address structure earlier
  net: ieee802154: Add a kernel doc header to the ieee802154_addr
    structure
  net: ieee802154: Trace the registration of new PANs

Miquel Raynal (22):
  net: mac802154: Split the set channel hook implementation
  net: mac802154: Ensure proper channel selection at probe time
  net: ieee802154: Improve the way supported channels are declared
  net: ieee802154: Give more details to the core about the channel
    configurations
  net: mac802154: Convert the symbol duration into nanoseconds
  net: mac802154: Set the symbol duration automatically
  net: ieee802154: hwsim: Ensure frame checksum are valid
  net: ieee802154: Drop symbol duration settings when the core does it
    already
  net: ieee802154: Return meaningful error codes from the netlink
    helpers
  net: ieee802154: Add support for internal PAN management
  net: ieee802154: Define a beacon frame header
  net: ieee802154: Define frame types
  net: ieee802154: Add support for scanning requests
  net: mac802154: Handle scan requests
  net: ieee802154: Full PAN management
  net: ieee802154: Add support for beacon requests
  net: mac802154: Handle beacons requests
  net: mac802154: Add support for active scans
  net: mac802154: Add support for processing beacon requests
  net: mac802154: Inform device drivers about scans
  net: mac802154: Inform device drivers about beacon operations
  net: ieee802154: ca8210: Refuse most of the scan operations

 drivers/net/ieee802154/adf7242.c         |   3 +-
 drivers/net/ieee802154/at86rf230.c       |  34 +-
 drivers/net/ieee802154/atusb.c           |  34 +-
 drivers/net/ieee802154/ca8210.c          |  32 +-
 drivers/net/ieee802154/cc2520.c          |   3 +-
 drivers/net/ieee802154/fakelb.c          |  43 +-
 drivers/net/ieee802154/mac802154_hwsim.c |  78 +++-
 drivers/net/ieee802154/mcr20a.c          |   8 +-
 drivers/net/ieee802154/mrf24j40.c        |   3 +-
 include/linux/ieee802154.h               |   7 +
 include/net/cfg802154.h                  | 167 ++++++-
 include/net/ieee802154_netdev.h          |  85 ++++
 include/net/mac802154.h                  |  40 ++
 include/net/nl802154.h                   |  99 ++++
 net/Kconfig                              |   3 +-
 net/ieee802154/Kconfig                   |   1 +
 net/ieee802154/Makefile                  |   2 +-
 net/ieee802154/core.c                    |   2 +
 net/ieee802154/core.h                    |  31 ++
 net/ieee802154/header_ops.c              |  67 +++
 net/ieee802154/nl-phy.c                  |   8 +-
 net/ieee802154/nl802154.c                | 548 ++++++++++++++++++++++-
 net/ieee802154/nl802154.h                |   4 +
 net/ieee802154/pan.c                     | 234 ++++++++++
 net/ieee802154/rdev-ops.h                |  52 +++
 net/ieee802154/trace.h                   |  86 ++++
 net/mac802154/Makefile                   |   2 +-
 net/mac802154/cfg.c                      |  94 +++-
 net/mac802154/driver-ops.h               |  58 +++
 net/mac802154/ieee802154_i.h             |  52 +++
 net/mac802154/main.c                     | 113 ++++-
 net/mac802154/rx.c                       |  34 +-
 net/mac802154/scan.c                     | 446 ++++++++++++++++++
 net/mac802154/trace.h                    |  49 ++
 net/mac802154/tx.c                       |   3 +
 net/mac802154/util.c                     |  26 ++
 36 files changed, 2438 insertions(+), 113 deletions(-)
 create mode 100644 net/ieee802154/pan.c
 create mode 100644 net/mac802154/scan.c

-- 
2.27.0