[PATCH 0/2] mfd: twlx030: i2c remove callback cleanup

["Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>]

Hello,

the remove paths of the twl4030 chip can fail and then returns an error
code in twl_remove() early. This isn't a good thing, because the device
will still go away with some resources not freed.
For the twl6030 this cannot happen, and the first patch is just a small
cleanup. For the twl4030 the situation is improved a bit: When the
failure happens, the dummy slave devices are removed now.

Note that twl4030_exit_irq() is incomplete. The irq isn't freed and
maybe some more cleanup is missing which might boom if an irq triggers
after the device is removed. Not sure that twl6030_exit_irq() is better
in this regard.

I noticed this issue because I work on making i2c_driver::remove return
void as returning a value != 0 there is almost always an error attached
to wrong expectations.

Best regards
Uwe

Uwe Kleine-König (2):
  mfd: twl6030: Make twl6030_exit_irq() return void
  mfd: twl4030: Make twl4030_exit_irq() return void

 drivers/mfd/twl-core.c    | 8 ++------
 drivers/mfd/twl-core.h    | 4 ++--
 drivers/mfd/twl4030-irq.c | 7 ++-----
 drivers/mfd/twl6030-irq.c | 3 +--
 4 files changed, 7 insertions(+), 15 deletions(-)

base-commit: 455e73a07f6e288b0061dfcf4fcf54fa9fe06458
-- 
2.34.1