From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 52538C433EF for ; Thu, 13 Jan 2022 11:58:10 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232480AbiAML6J (ORCPT ); Thu, 13 Jan 2022 06:58:09 -0500 Received: from mail-sz.amlogic.com ([211.162.65.117]:49626 "EHLO mail-sz.amlogic.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234319AbiAML6F (ORCPT ); Thu, 13 Jan 2022 06:58:05 -0500 Received: from droid11-sz.amlogic.com (10.28.8.21) by mail-sz.amlogic.com (10.28.11.5) with Microsoft SMTP Server id 15.1.2176.2; Thu, 13 Jan 2022 19:58:03 +0800 From: Liang Yang To: Neil Armstrong , Jerome Brunet , Kevin Hilman , Michael Turquette , Stephen Boyd , Rob Herring , CC: Liang Yang , Martin Blumenstingl , Jianxin Pan , Victor Wan , XianWei Zhao , Kelvin Zhang , BiChao Zheng , YongHui Yu , , , Subject: [PATCH v9 4/4] clk: meson: add sub MMC clock controller driver Date: Thu, 13 Jan 2022 19:57:45 +0800 Message-ID: <20220113115745.45826-5-liang.yang@amlogic.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20220113115745.45826-1-liang.yang@amlogic.com> References: <20220113115745.45826-1-liang.yang@amlogic.com> MIME-Version: 1.0 Content-Transfer-Encoding: 7BIT Content-Type: text/plain; charset=US-ASCII X-Originating-IP: [10.28.8.21] Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The patch will add a MMC clock controller driver which used by MMC or NAND, It provide a mux and divider clock, and three phase clocks - core, tx, tx. Two clocks are provided as the parent of MMC clock controller from upper layer clock controller - eg "amlogic,axg-clkc" in AXG platform. To specify which clock the MMC or NAND driver may consume, the preprocessor macros in the dt-bindings/clock/amlogic,mmc-clkc.h header can be used in the device tree sources. Signed-off-by: Liang Yang --- drivers/clk/meson/Kconfig | 14 ++ drivers/clk/meson/Makefile | 1 + drivers/clk/meson/mmc-clkc.c | 300 +++++++++++++++++++++++++++++++++++ 3 files changed, 315 insertions(+) create mode 100644 drivers/clk/meson/mmc-clkc.c diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig index bb0f59eea366..3de6f3b24461 100644 --- a/drivers/clk/meson/Kconfig +++ b/drivers/clk/meson/Kconfig @@ -39,6 +39,20 @@ config COMMON_CLK_MESON_AO_CLKC select COMMON_CLK_MESON_REGMAP select RESET_CONTROLLER +config COMMON_CLK_MMC_MESON + tristate "Meson MMC Sub Clock Controller Driver" + depends on ARCH_MESON || COMPILE_TEST + select MFD_SYSCON + select COMMON_CLK_AMLOGIC + select COMMON_CLK_MESON_PHASE + select COMMON_CLK_MESON_PHASE_DELAY + select COMMON_CLK_MESON_SCLK_DIV + help + Support for the MMC sub clock controller on + Amlogic Meson Platform, which includes S905 (GXBB, GXL), + A113D/X (AXG) devices . Say Y if you want this + clock enabled. + config COMMON_CLK_MESON_EE_CLKC tristate select COMMON_CLK_MESON_REGMAP diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile index c450f38d3801..f7a94a33e789 100644 --- a/drivers/clk/meson/Makefile +++ b/drivers/clk/meson/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_PHASE_DELAY) += clk-phase-delay.o obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o +obj-$(CONFIG_COMMON_CLK_MMC_MESON) += mmc-clkc.o obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o diff --git a/drivers/clk/meson/mmc-clkc.c b/drivers/clk/meson/mmc-clkc.c new file mode 100644 index 000000000000..f53977f61390 --- /dev/null +++ b/drivers/clk/meson/mmc-clkc.c @@ -0,0 +1,300 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "sclk-div.h" +#include "clk-phase-delay.h" +#include "clk-regmap.h" +#include "clk-phase.h" + +/* clock ID used by internal driver */ + +#define SD_EMMC_CLOCK 0 +#define CLK_DELAY_STEP_PS_GX 200 +#define CLK_DELAY_STEP_PS_AXG 78 +#define MUX_CLK_NUM_PARENTS 2 +#define MMC_MAX_CLKS 4 + +struct mmc_clkc_data { + struct meson_clk_phase_delay_data tx; + struct meson_clk_phase_delay_data rx; +}; + +static struct clk_regmap_mux_data mmc_clkc_mux_data = { + .offset = SD_EMMC_CLOCK, + .mask = 0x3, + .shift = 6, +}; + +static const struct meson_sclk_div_data mmc_clkc_div_data = { + .div = { + .reg_off = SD_EMMC_CLOCK, + .width = 6, + }, + .flags = MESON_SCLK_ONE_BASED, +}; + +static struct meson_clk_phase_data mmc_clkc_core_phase = { + .ph = { + .reg_off = SD_EMMC_CLOCK, + .shift = 8, + .width = 2, + } +}; + +static const struct mmc_clkc_data mmc_clkc_gx_data = { + .tx = { + .phase = { + .reg_off = SD_EMMC_CLOCK, + .shift = 10, + .width = 2, + }, + .delay = { + .reg_off = SD_EMMC_CLOCK, + .shift = 16, + .width = 4, + }, + .delay_step_ps = CLK_DELAY_STEP_PS_GX, + }, + .rx = { + .phase = { + .reg_off = SD_EMMC_CLOCK, + .shift = 12, + .width = 2, + }, + .delay = { + .reg_off = SD_EMMC_CLOCK, + .shift = 20, + .width = 4, + }, + .delay_step_ps = CLK_DELAY_STEP_PS_GX, + }, +}; + +static const struct mmc_clkc_data mmc_clkc_axg_data = { + .tx = { + .phase = { + .reg_off = SD_EMMC_CLOCK, + .shift = 10, + .width = 2, + }, + .delay = { + .reg_off = SD_EMMC_CLOCK, + .shift = 16, + .width = 6, + }, + .delay_step_ps = CLK_DELAY_STEP_PS_AXG, + }, + .rx = { + .phase = { + .reg_off = SD_EMMC_CLOCK, + .shift = 12, + .width = 2, + }, + .delay = { + .reg_off = SD_EMMC_CLOCK, + .shift = 22, + .width = 6, + }, + .delay_step_ps = CLK_DELAY_STEP_PS_AXG, + }, +}; + +static const struct of_device_id mmc_clkc_match_table[] = { + { + .compatible = "amlogic,gx-mmc-clkc", + .data = &mmc_clkc_gx_data + }, + { + .compatible = "amlogic,axg-mmc-clkc", + .data = &mmc_clkc_axg_data + }, + {} +}; +MODULE_DEVICE_TABLE(of, mmc_clkc_match_table); + +static struct clk_regmap * +mmc_clkc_register_clk(struct device *dev, struct regmap *map, + struct clk_init_data *init, + const char *suffix, void *data) +{ + struct clk_regmap *clk; + char *name; + int ret; + + clk = devm_kzalloc(dev, sizeof(*clk), GFP_KERNEL); + if (!clk) + return ERR_PTR(-ENOMEM); + + name = kasprintf(GFP_KERNEL, "%s#%s", dev_name(dev), suffix); + if (!name) + return ERR_PTR(-ENOMEM); + + init->name = name; + clk->map = map; + clk->data = data; + clk->hw.init = init; + ret = devm_clk_hw_register(dev, &clk->hw); + if (ret) + clk = ERR_PTR(ret); + + kfree(name); + return clk; +} + +static struct clk_regmap *mmc_clkc_register_mux(struct device *dev, + struct regmap *map) +{ + const char *parent_names[MUX_CLK_NUM_PARENTS]; + struct clk_init_data init; + struct clk_regmap *mux; + struct clk *clk; + int i; + + for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) { + char name[8]; + + snprintf(name, sizeof(name), "clkin%d", i); + clk = devm_clk_get(dev, name); + if (IS_ERR(clk)) { + if (clk != ERR_PTR(-EPROBE_DEFER)) + dev_err(dev, "Missing clock %s\n", name); + return ERR_CAST(clk); + } + + parent_names[i] = __clk_get_name(clk); + } + + init.ops = &clk_regmap_mux_ops; + init.flags = CLK_SET_RATE_PARENT; + init.parent_names = parent_names; + init.num_parents = MUX_CLK_NUM_PARENTS; + + mux = mmc_clkc_register_clk(dev, map, &init, "mux", &mmc_clkc_mux_data); + if (IS_ERR(mux)) + dev_err(dev, "Mux clock registration failed\n"); + + return mux; +} + +static struct clk_regmap * +mmc_clkc_register_clk_with_parent(struct device *dev, struct regmap *map, + char *suffix, const struct clk_hw *hw, + unsigned long flags, + const struct clk_ops *ops, void *data) +{ + struct clk_init_data init; + struct clk_regmap *clk; + const char *parent_name = clk_hw_get_name(hw); + + init.ops = ops; + init.flags = flags; + init.parent_names = &parent_name; + init.num_parents = 1; + + clk = mmc_clkc_register_clk(dev, map, &init, suffix, data); + if (IS_ERR(clk)) + dev_err(dev, "%s clock registration failed\n", suffix); + + return clk; +} + +static int mmc_clkc_probe(struct platform_device *pdev) +{ + struct clk_hw_onecell_data *onecell_data; + struct device *dev = &pdev->dev; + struct mmc_clkc_data *data; + struct regmap *map; + struct clk_regmap *clk, *core; + struct meson_sclk_div_data *div_data; + + /*cast to drop the const in match->data*/ + data = (struct mmc_clkc_data *)of_device_get_match_data(dev); + if (!data) + return -ENODEV; + + map = syscon_node_to_regmap(dev->of_node); + if (IS_ERR(map)) { + dev_err(dev, "could not find mmc clock controller\n"); + return PTR_ERR(map); + } + + onecell_data = devm_kzalloc(dev, + struct_size(onecell_data, hws, + MMC_MAX_CLKS), + GFP_KERNEL); + if (!onecell_data) + return -ENOMEM; + + clk = mmc_clkc_register_mux(dev, map); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + div_data = devm_kzalloc(dev, sizeof(*div_data), GFP_KERNEL); + if (!div_data) + return -ENOMEM; + + memcpy(div_data, &mmc_clkc_div_data, sizeof(*div_data)); + clk = mmc_clkc_register_clk_with_parent(dev, map, "div", + &clk->hw, + CLK_SET_RATE_PARENT, + &meson_sclk_div_ops, + div_data); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + onecell_data->hws[CLKID_MMC_DIV] = &clk->hw; + core = mmc_clkc_register_clk_with_parent(dev, map, "core", + &clk->hw, + CLK_SET_RATE_PARENT, + &meson_clk_phase_ops, + &mmc_clkc_core_phase); + if (IS_ERR(core)) + return PTR_ERR(core); + + onecell_data->hws[CLKID_MMC_PHASE_CORE] = &core->hw; + clk = mmc_clkc_register_clk_with_parent(dev, map, "rx", + &core->hw, 0, + &meson_clk_phase_delay_ops, + &data->rx); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + onecell_data->hws[CLKID_MMC_PHASE_RX] = &clk->hw; + clk = mmc_clkc_register_clk_with_parent(dev, map, "tx", + &core->hw, 0, + &meson_clk_phase_delay_ops, + &data->tx); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + onecell_data->hws[CLKID_MMC_PHASE_TX] = &clk->hw; + onecell_data->num = MMC_MAX_CLKS; + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, + onecell_data); +} + +static struct platform_driver mmc_clkc_driver = { + .probe = mmc_clkc_probe, + .driver = { + .name = "meson-mmc-clkc", + .of_match_table = of_match_ptr(mmc_clkc_match_table), + }, +}; + +module_platform_driver(mmc_clkc_driver); + +MODULE_DESCRIPTION("Amlogic AXG MMC clock driver"); +MODULE_AUTHOR("Jianxin Pan "); +MODULE_LICENSE("GPL v2"); -- 2.34.1 From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id EE753C433F5 for ; Thu, 13 Jan 2022 11:59:40 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=Hi0gADUN0l6Wu8bmE6dOzfyNRT4ZosHW94WtVXkrsy4=; b=xL4U1Rg8/WS3UB syyYeLoSVncxoKYNamUeS3gmnwppn4J6CwDZJhDqKSvLTOfe0m/TmBywk5mk6+DTkY7afpKMMbzBP xEQMKnTgDFqHxqBgwFiVEXWMCSYMN2juCZ3U54vv8QzuW9jomZcJLLrSUuaF4F1XOBcKQSu/tzcLM RySyWmwDwJM1oINdPeaz0TA5xj13swXrT2yVH1D6crcqCyJHOTvg+jtuBxWJ5Ewa4hp8K4LftwVob F0iHN0s0mfB9MD3LUyc/VT3VSLBKhXV7GbDhUohHq8dbH2eV2EQ3JzmFphKaefh+lo/MuNJsgfRec VfSsUDTu5oagN/ob8T9Q==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1n7ylT-005iFD-Sq; Thu, 13 Jan 2022 11:59:35 +0000 Received: from mail-sz.amlogic.com ([211.162.65.117]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1n7yk2-005hIN-Kj; Thu, 13 Jan 2022 11:58:08 +0000 Received: from droid11-sz.amlogic.com (10.28.8.21) by mail-sz.amlogic.com (10.28.11.5) with Microsoft SMTP Server id 15.1.2176.2; Thu, 13 Jan 2022 19:58:03 +0800 From: Liang Yang To: Neil Armstrong , Jerome Brunet , Kevin Hilman , Michael Turquette , Stephen Boyd , Rob Herring , CC: Liang Yang , Martin Blumenstingl , Jianxin Pan , Victor Wan , XianWei Zhao , Kelvin Zhang , BiChao Zheng , YongHui Yu , , , Subject: [PATCH v9 4/4] clk: meson: add sub MMC clock controller driver Date: Thu, 13 Jan 2022 19:57:45 +0800 Message-ID: <20220113115745.45826-5-liang.yang@amlogic.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20220113115745.45826-1-liang.yang@amlogic.com> References: <20220113115745.45826-1-liang.yang@amlogic.com> MIME-Version: 1.0 X-Originating-IP: [10.28.8.21] X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20220113_035806_938907_DECD002F X-CRM114-Status: GOOD ( 22.62 ) X-BeenThere: linux-amlogic@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-amlogic" Errors-To: linux-amlogic-bounces+linux-amlogic=archiver.kernel.org@lists.infradead.org The patch will add a MMC clock controller driver which used by MMC or NAND, It provide a mux and divider clock, and three phase clocks - core, tx, tx. Two clocks are provided as the parent of MMC clock controller from upper layer clock controller - eg "amlogic,axg-clkc" in AXG platform. To specify which clock the MMC or NAND driver may consume, the preprocessor macros in the dt-bindings/clock/amlogic,mmc-clkc.h header can be used in the device tree sources. Signed-off-by: Liang Yang --- drivers/clk/meson/Kconfig | 14 ++ drivers/clk/meson/Makefile | 1 + drivers/clk/meson/mmc-clkc.c | 300 +++++++++++++++++++++++++++++++++++ 3 files changed, 315 insertions(+) create mode 100644 drivers/clk/meson/mmc-clkc.c diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig index bb0f59eea366..3de6f3b24461 100644 --- a/drivers/clk/meson/Kconfig +++ b/drivers/clk/meson/Kconfig @@ -39,6 +39,20 @@ config COMMON_CLK_MESON_AO_CLKC select COMMON_CLK_MESON_REGMAP select RESET_CONTROLLER +config COMMON_CLK_MMC_MESON + tristate "Meson MMC Sub Clock Controller Driver" + depends on ARCH_MESON || COMPILE_TEST + select MFD_SYSCON + select COMMON_CLK_AMLOGIC + select COMMON_CLK_MESON_PHASE + select COMMON_CLK_MESON_PHASE_DELAY + select COMMON_CLK_MESON_SCLK_DIV + help + Support for the MMC sub clock controller on + Amlogic Meson Platform, which includes S905 (GXBB, GXL), + A113D/X (AXG) devices . Say Y if you want this + clock enabled. + config COMMON_CLK_MESON_EE_CLKC tristate select COMMON_CLK_MESON_REGMAP diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile index c450f38d3801..f7a94a33e789 100644 --- a/drivers/clk/meson/Makefile +++ b/drivers/clk/meson/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_PHASE_DELAY) += clk-phase-delay.o obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o +obj-$(CONFIG_COMMON_CLK_MMC_MESON) += mmc-clkc.o obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o diff --git a/drivers/clk/meson/mmc-clkc.c b/drivers/clk/meson/mmc-clkc.c new file mode 100644 index 000000000000..f53977f61390 --- /dev/null +++ b/drivers/clk/meson/mmc-clkc.c @@ -0,0 +1,300 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "sclk-div.h" +#include "clk-phase-delay.h" +#include "clk-regmap.h" +#include "clk-phase.h" + +/* clock ID used by internal driver */ + +#define SD_EMMC_CLOCK 0 +#define CLK_DELAY_STEP_PS_GX 200 +#define CLK_DELAY_STEP_PS_AXG 78 +#define MUX_CLK_NUM_PARENTS 2 +#define MMC_MAX_CLKS 4 + +struct mmc_clkc_data { + struct meson_clk_phase_delay_data tx; + struct meson_clk_phase_delay_data rx; +}; + +static struct clk_regmap_mux_data mmc_clkc_mux_data = { + .offset = SD_EMMC_CLOCK, + .mask = 0x3, + .shift = 6, +}; + +static const struct meson_sclk_div_data mmc_clkc_div_data = { + .div = { + .reg_off = SD_EMMC_CLOCK, + .width = 6, + }, + .flags = MESON_SCLK_ONE_BASED, +}; + +static struct meson_clk_phase_data mmc_clkc_core_phase = { + .ph = { + .reg_off = SD_EMMC_CLOCK, + .shift = 8, + .width = 2, + } +}; + +static const struct mmc_clkc_data mmc_clkc_gx_data = { + .tx = { + .phase = { + .reg_off = SD_EMMC_CLOCK, + .shift = 10, + .width = 2, + }, + .delay = { + .reg_off = SD_EMMC_CLOCK, + .shift = 16, + .width = 4, + }, + .delay_step_ps = CLK_DELAY_STEP_PS_GX, + }, + .rx = { + .phase = { + .reg_off = SD_EMMC_CLOCK, + .shift = 12, + .width = 2, + }, + .delay = { + .reg_off = SD_EMMC_CLOCK, + .shift = 20, + .width = 4, + }, + .delay_step_ps = CLK_DELAY_STEP_PS_GX, + }, +}; + +static const struct mmc_clkc_data mmc_clkc_axg_data = { + .tx = { + .phase = { + .reg_off = SD_EMMC_CLOCK, + .shift = 10, + .width = 2, + }, + .delay = { + .reg_off = SD_EMMC_CLOCK, + .shift = 16, + .width = 6, + }, + .delay_step_ps = CLK_DELAY_STEP_PS_AXG, + }, + .rx = { + .phase = { + .reg_off = SD_EMMC_CLOCK, + .shift = 12, + .width = 2, + }, + .delay = { + .reg_off = SD_EMMC_CLOCK, + .shift = 22, + .width = 6, + }, + .delay_step_ps = CLK_DELAY_STEP_PS_AXG, + }, +}; + +static const struct of_device_id mmc_clkc_match_table[] = { + { + .compatible = "amlogic,gx-mmc-clkc", + .data = &mmc_clkc_gx_data + }, + { + .compatible = "amlogic,axg-mmc-clkc", + .data = &mmc_clkc_axg_data + }, + {} +}; +MODULE_DEVICE_TABLE(of, mmc_clkc_match_table); + +static struct clk_regmap * +mmc_clkc_register_clk(struct device *dev, struct regmap *map, + struct clk_init_data *init, + const char *suffix, void *data) +{ + struct clk_regmap *clk; + char *name; + int ret; + + clk = devm_kzalloc(dev, sizeof(*clk), GFP_KERNEL); + if (!clk) + return ERR_PTR(-ENOMEM); + + name = kasprintf(GFP_KERNEL, "%s#%s", dev_name(dev), suffix); + if (!name) + return ERR_PTR(-ENOMEM); + + init->name = name; + clk->map = map; + clk->data = data; + clk->hw.init = init; + ret = devm_clk_hw_register(dev, &clk->hw); + if (ret) + clk = ERR_PTR(ret); + + kfree(name); + return clk; +} + +static struct clk_regmap *mmc_clkc_register_mux(struct device *dev, + struct regmap *map) +{ + const char *parent_names[MUX_CLK_NUM_PARENTS]; + struct clk_init_data init; + struct clk_regmap *mux; + struct clk *clk; + int i; + + for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) { + char name[8]; + + snprintf(name, sizeof(name), "clkin%d", i); + clk = devm_clk_get(dev, name); + if (IS_ERR(clk)) { + if (clk != ERR_PTR(-EPROBE_DEFER)) + dev_err(dev, "Missing clock %s\n", name); + return ERR_CAST(clk); + } + + parent_names[i] = __clk_get_name(clk); + } + + init.ops = &clk_regmap_mux_ops; + init.flags = CLK_SET_RATE_PARENT; + init.parent_names = parent_names; + init.num_parents = MUX_CLK_NUM_PARENTS; + + mux = mmc_clkc_register_clk(dev, map, &init, "mux", &mmc_clkc_mux_data); + if (IS_ERR(mux)) + dev_err(dev, "Mux clock registration failed\n"); + + return mux; +} + +static struct clk_regmap * +mmc_clkc_register_clk_with_parent(struct device *dev, struct regmap *map, + char *suffix, const struct clk_hw *hw, + unsigned long flags, + const struct clk_ops *ops, void *data) +{ + struct clk_init_data init; + struct clk_regmap *clk; + const char *parent_name = clk_hw_get_name(hw); + + init.ops = ops; + init.flags = flags; + init.parent_names = &parent_name; + init.num_parents = 1; + + clk = mmc_clkc_register_clk(dev, map, &init, suffix, data); + if (IS_ERR(clk)) + dev_err(dev, "%s clock registration failed\n", suffix); + + return clk; +} + +static int mmc_clkc_probe(struct platform_device *pdev) +{ + struct clk_hw_onecell_data *onecell_data; + struct device *dev = &pdev->dev; + struct mmc_clkc_data *data; + struct regmap *map; + struct clk_regmap *clk, *core; + struct meson_sclk_div_data *div_data; + + /*cast to drop the const in match->data*/ + data = (struct mmc_clkc_data *)of_device_get_match_data(dev); + if (!data) + return -ENODEV; + + map = syscon_node_to_regmap(dev->of_node); + if (IS_ERR(map)) { + dev_err(dev, "could not find mmc clock controller\n"); + return PTR_ERR(map); + } + + onecell_data = devm_kzalloc(dev, + struct_size(onecell_data, hws, + MMC_MAX_CLKS), + GFP_KERNEL); + if (!onecell_data) + return -ENOMEM; + + clk = mmc_clkc_register_mux(dev, map); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + div_data = devm_kzalloc(dev, sizeof(*div_data), GFP_KERNEL); + if (!div_data) + return -ENOMEM; + + memcpy(div_data, &mmc_clkc_div_data, sizeof(*div_data)); + clk = mmc_clkc_register_clk_with_parent(dev, map, "div", + &clk->hw, + CLK_SET_RATE_PARENT, + &meson_sclk_div_ops, + div_data); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + onecell_data->hws[CLKID_MMC_DIV] = &clk->hw; + core = mmc_clkc_register_clk_with_parent(dev, map, "core", + &clk->hw, + CLK_SET_RATE_PARENT, + &meson_clk_phase_ops, + &mmc_clkc_core_phase); + if (IS_ERR(core)) + return PTR_ERR(core); + + onecell_data->hws[CLKID_MMC_PHASE_CORE] = &core->hw; + clk = mmc_clkc_register_clk_with_parent(dev, map, "rx", + &core->hw, 0, + &meson_clk_phase_delay_ops, + &data->rx); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + onecell_data->hws[CLKID_MMC_PHASE_RX] = &clk->hw; + clk = mmc_clkc_register_clk_with_parent(dev, map, "tx", + &core->hw, 0, + &meson_clk_phase_delay_ops, + &data->tx); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + onecell_data->hws[CLKID_MMC_PHASE_TX] = &clk->hw; + onecell_data->num = MMC_MAX_CLKS; + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, + onecell_data); +} + +static struct platform_driver mmc_clkc_driver = { + .probe = mmc_clkc_probe, + .driver = { + .name = "meson-mmc-clkc", + .of_match_table = of_match_ptr(mmc_clkc_match_table), + }, +}; + +module_platform_driver(mmc_clkc_driver); + +MODULE_DESCRIPTION("Amlogic AXG MMC clock driver"); +MODULE_AUTHOR("Jianxin Pan "); +MODULE_LICENSE("GPL v2"); -- 2.34.1 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 42DA7C433F5 for ; Thu, 13 Jan 2022 12:00:33 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=PZe/E2+7S+8cQl7nMIpO03RxvOuj5F8qsjbLf98ZG10=; b=gGOJDgRtlTynsB xlwmx+12yac2+a7CIlJms+okGEnoVZxYI9mIkbELuf9o4dU9skzZCVemdQkLFnX7oESX5ybj+veQ+ N27/WUTE7+vMxx1ss1ENBCVynyFCjSLpraE45GdDrysEUOpTnrt/wlclzd6pGEoKOc/Zrn6YU6i77 sqOiGoRm9XpU9ZDJOs1TYKVGuMB5TkqmmyYu3Meg80lbzLPNPG3sVpuUUrfnLHjeKeQVxNsibwx2G 06uTiTlN3WzPO51X7MRsdLb6iaF44wIALfPsJDX/3EjjUEUPNpzbbhIKmSjchqcLG4uC4y9AyIMTA 8whpeeFN7lAYNuNpKyGQ==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1n7yl7-005hyu-HU; Thu, 13 Jan 2022 11:59:13 +0000 Received: from mail-sz.amlogic.com ([211.162.65.117]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1n7yk2-005hIN-Kj; Thu, 13 Jan 2022 11:58:08 +0000 Received: from droid11-sz.amlogic.com (10.28.8.21) by mail-sz.amlogic.com (10.28.11.5) with Microsoft SMTP Server id 15.1.2176.2; Thu, 13 Jan 2022 19:58:03 +0800 From: Liang Yang To: Neil Armstrong , Jerome Brunet , Kevin Hilman , Michael Turquette , Stephen Boyd , Rob Herring , CC: Liang Yang , Martin Blumenstingl , Jianxin Pan , Victor Wan , XianWei Zhao , Kelvin Zhang , BiChao Zheng , YongHui Yu , , , Subject: [PATCH v9 4/4] clk: meson: add sub MMC clock controller driver Date: Thu, 13 Jan 2022 19:57:45 +0800 Message-ID: <20220113115745.45826-5-liang.yang@amlogic.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20220113115745.45826-1-liang.yang@amlogic.com> References: <20220113115745.45826-1-liang.yang@amlogic.com> MIME-Version: 1.0 X-Originating-IP: [10.28.8.21] X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20220113_035806_938907_DECD002F X-CRM114-Status: GOOD ( 22.62 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org The patch will add a MMC clock controller driver which used by MMC or NAND, It provide a mux and divider clock, and three phase clocks - core, tx, tx. Two clocks are provided as the parent of MMC clock controller from upper layer clock controller - eg "amlogic,axg-clkc" in AXG platform. To specify which clock the MMC or NAND driver may consume, the preprocessor macros in the dt-bindings/clock/amlogic,mmc-clkc.h header can be used in the device tree sources. Signed-off-by: Liang Yang --- drivers/clk/meson/Kconfig | 14 ++ drivers/clk/meson/Makefile | 1 + drivers/clk/meson/mmc-clkc.c | 300 +++++++++++++++++++++++++++++++++++ 3 files changed, 315 insertions(+) create mode 100644 drivers/clk/meson/mmc-clkc.c diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig index bb0f59eea366..3de6f3b24461 100644 --- a/drivers/clk/meson/Kconfig +++ b/drivers/clk/meson/Kconfig @@ -39,6 +39,20 @@ config COMMON_CLK_MESON_AO_CLKC select COMMON_CLK_MESON_REGMAP select RESET_CONTROLLER +config COMMON_CLK_MMC_MESON + tristate "Meson MMC Sub Clock Controller Driver" + depends on ARCH_MESON || COMPILE_TEST + select MFD_SYSCON + select COMMON_CLK_AMLOGIC + select COMMON_CLK_MESON_PHASE + select COMMON_CLK_MESON_PHASE_DELAY + select COMMON_CLK_MESON_SCLK_DIV + help + Support for the MMC sub clock controller on + Amlogic Meson Platform, which includes S905 (GXBB, GXL), + A113D/X (AXG) devices . Say Y if you want this + clock enabled. + config COMMON_CLK_MESON_EE_CLKC tristate select COMMON_CLK_MESON_REGMAP diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile index c450f38d3801..f7a94a33e789 100644 --- a/drivers/clk/meson/Makefile +++ b/drivers/clk/meson/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_PHASE_DELAY) += clk-phase-delay.o obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o +obj-$(CONFIG_COMMON_CLK_MMC_MESON) += mmc-clkc.o obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o diff --git a/drivers/clk/meson/mmc-clkc.c b/drivers/clk/meson/mmc-clkc.c new file mode 100644 index 000000000000..f53977f61390 --- /dev/null +++ b/drivers/clk/meson/mmc-clkc.c @@ -0,0 +1,300 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "sclk-div.h" +#include "clk-phase-delay.h" +#include "clk-regmap.h" +#include "clk-phase.h" + +/* clock ID used by internal driver */ + +#define SD_EMMC_CLOCK 0 +#define CLK_DELAY_STEP_PS_GX 200 +#define CLK_DELAY_STEP_PS_AXG 78 +#define MUX_CLK_NUM_PARENTS 2 +#define MMC_MAX_CLKS 4 + +struct mmc_clkc_data { + struct meson_clk_phase_delay_data tx; + struct meson_clk_phase_delay_data rx; +}; + +static struct clk_regmap_mux_data mmc_clkc_mux_data = { + .offset = SD_EMMC_CLOCK, + .mask = 0x3, + .shift = 6, +}; + +static const struct meson_sclk_div_data mmc_clkc_div_data = { + .div = { + .reg_off = SD_EMMC_CLOCK, + .width = 6, + }, + .flags = MESON_SCLK_ONE_BASED, +}; + +static struct meson_clk_phase_data mmc_clkc_core_phase = { + .ph = { + .reg_off = SD_EMMC_CLOCK, + .shift = 8, + .width = 2, + } +}; + +static const struct mmc_clkc_data mmc_clkc_gx_data = { + .tx = { + .phase = { + .reg_off = SD_EMMC_CLOCK, + .shift = 10, + .width = 2, + }, + .delay = { + .reg_off = SD_EMMC_CLOCK, + .shift = 16, + .width = 4, + }, + .delay_step_ps = CLK_DELAY_STEP_PS_GX, + }, + .rx = { + .phase = { + .reg_off = SD_EMMC_CLOCK, + .shift = 12, + .width = 2, + }, + .delay = { + .reg_off = SD_EMMC_CLOCK, + .shift = 20, + .width = 4, + }, + .delay_step_ps = CLK_DELAY_STEP_PS_GX, + }, +}; + +static const struct mmc_clkc_data mmc_clkc_axg_data = { + .tx = { + .phase = { + .reg_off = SD_EMMC_CLOCK, + .shift = 10, + .width = 2, + }, + .delay = { + .reg_off = SD_EMMC_CLOCK, + .shift = 16, + .width = 6, + }, + .delay_step_ps = CLK_DELAY_STEP_PS_AXG, + }, + .rx = { + .phase = { + .reg_off = SD_EMMC_CLOCK, + .shift = 12, + .width = 2, + }, + .delay = { + .reg_off = SD_EMMC_CLOCK, + .shift = 22, + .width = 6, + }, + .delay_step_ps = CLK_DELAY_STEP_PS_AXG, + }, +}; + +static const struct of_device_id mmc_clkc_match_table[] = { + { + .compatible = "amlogic,gx-mmc-clkc", + .data = &mmc_clkc_gx_data + }, + { + .compatible = "amlogic,axg-mmc-clkc", + .data = &mmc_clkc_axg_data + }, + {} +}; +MODULE_DEVICE_TABLE(of, mmc_clkc_match_table); + +static struct clk_regmap * +mmc_clkc_register_clk(struct device *dev, struct regmap *map, + struct clk_init_data *init, + const char *suffix, void *data) +{ + struct clk_regmap *clk; + char *name; + int ret; + + clk = devm_kzalloc(dev, sizeof(*clk), GFP_KERNEL); + if (!clk) + return ERR_PTR(-ENOMEM); + + name = kasprintf(GFP_KERNEL, "%s#%s", dev_name(dev), suffix); + if (!name) + return ERR_PTR(-ENOMEM); + + init->name = name; + clk->map = map; + clk->data = data; + clk->hw.init = init; + ret = devm_clk_hw_register(dev, &clk->hw); + if (ret) + clk = ERR_PTR(ret); + + kfree(name); + return clk; +} + +static struct clk_regmap *mmc_clkc_register_mux(struct device *dev, + struct regmap *map) +{ + const char *parent_names[MUX_CLK_NUM_PARENTS]; + struct clk_init_data init; + struct clk_regmap *mux; + struct clk *clk; + int i; + + for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) { + char name[8]; + + snprintf(name, sizeof(name), "clkin%d", i); + clk = devm_clk_get(dev, name); + if (IS_ERR(clk)) { + if (clk != ERR_PTR(-EPROBE_DEFER)) + dev_err(dev, "Missing clock %s\n", name); + return ERR_CAST(clk); + } + + parent_names[i] = __clk_get_name(clk); + } + + init.ops = &clk_regmap_mux_ops; + init.flags = CLK_SET_RATE_PARENT; + init.parent_names = parent_names; + init.num_parents = MUX_CLK_NUM_PARENTS; + + mux = mmc_clkc_register_clk(dev, map, &init, "mux", &mmc_clkc_mux_data); + if (IS_ERR(mux)) + dev_err(dev, "Mux clock registration failed\n"); + + return mux; +} + +static struct clk_regmap * +mmc_clkc_register_clk_with_parent(struct device *dev, struct regmap *map, + char *suffix, const struct clk_hw *hw, + unsigned long flags, + const struct clk_ops *ops, void *data) +{ + struct clk_init_data init; + struct clk_regmap *clk; + const char *parent_name = clk_hw_get_name(hw); + + init.ops = ops; + init.flags = flags; + init.parent_names = &parent_name; + init.num_parents = 1; + + clk = mmc_clkc_register_clk(dev, map, &init, suffix, data); + if (IS_ERR(clk)) + dev_err(dev, "%s clock registration failed\n", suffix); + + return clk; +} + +static int mmc_clkc_probe(struct platform_device *pdev) +{ + struct clk_hw_onecell_data *onecell_data; + struct device *dev = &pdev->dev; + struct mmc_clkc_data *data; + struct regmap *map; + struct clk_regmap *clk, *core; + struct meson_sclk_div_data *div_data; + + /*cast to drop the const in match->data*/ + data = (struct mmc_clkc_data *)of_device_get_match_data(dev); + if (!data) + return -ENODEV; + + map = syscon_node_to_regmap(dev->of_node); + if (IS_ERR(map)) { + dev_err(dev, "could not find mmc clock controller\n"); + return PTR_ERR(map); + } + + onecell_data = devm_kzalloc(dev, + struct_size(onecell_data, hws, + MMC_MAX_CLKS), + GFP_KERNEL); + if (!onecell_data) + return -ENOMEM; + + clk = mmc_clkc_register_mux(dev, map); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + div_data = devm_kzalloc(dev, sizeof(*div_data), GFP_KERNEL); + if (!div_data) + return -ENOMEM; + + memcpy(div_data, &mmc_clkc_div_data, sizeof(*div_data)); + clk = mmc_clkc_register_clk_with_parent(dev, map, "div", + &clk->hw, + CLK_SET_RATE_PARENT, + &meson_sclk_div_ops, + div_data); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + onecell_data->hws[CLKID_MMC_DIV] = &clk->hw; + core = mmc_clkc_register_clk_with_parent(dev, map, "core", + &clk->hw, + CLK_SET_RATE_PARENT, + &meson_clk_phase_ops, + &mmc_clkc_core_phase); + if (IS_ERR(core)) + return PTR_ERR(core); + + onecell_data->hws[CLKID_MMC_PHASE_CORE] = &core->hw; + clk = mmc_clkc_register_clk_with_parent(dev, map, "rx", + &core->hw, 0, + &meson_clk_phase_delay_ops, + &data->rx); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + onecell_data->hws[CLKID_MMC_PHASE_RX] = &clk->hw; + clk = mmc_clkc_register_clk_with_parent(dev, map, "tx", + &core->hw, 0, + &meson_clk_phase_delay_ops, + &data->tx); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + onecell_data->hws[CLKID_MMC_PHASE_TX] = &clk->hw; + onecell_data->num = MMC_MAX_CLKS; + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, + onecell_data); +} + +static struct platform_driver mmc_clkc_driver = { + .probe = mmc_clkc_probe, + .driver = { + .name = "meson-mmc-clkc", + .of_match_table = of_match_ptr(mmc_clkc_match_table), + }, +}; + +module_platform_driver(mmc_clkc_driver); + +MODULE_DESCRIPTION("Amlogic AXG MMC clock driver"); +MODULE_AUTHOR("Jianxin Pan "); +MODULE_LICENSE("GPL v2"); -- 2.34.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel