All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v3 00/16] drm/vc4: hdmi: Yet Another Approach to HDMI YUV output
@ 2022-01-13 14:07 Maxime Ripard
  2022-01-13 14:07 ` [PATCH v3 01/16] drm/edid: Rename drm_hdmi_avi_infoframe_colorspace to _colorimetry Maxime Ripard
                   ` (15 more replies)
  0 siblings, 16 replies; 19+ messages in thread
From: Maxime Ripard @ 2022-01-13 14:07 UTC (permalink / raw)
  To: Daniel Vetter, David Airlie, Maarten Lankhorst,
	Thomas Zimmermann, Maxime Ripard
  Cc: Dom Cobley, Tim Gover, Dave Stevenson, Werner Sembach, dri-devel,
	Phil Elwell

Hi,

This is another attempt at supporting the HDMI YUV output in the vc4 HDMI
driver.

This is a follow-up of
https://lore.kernel.org/dri-devel/20210317154352.732095-1-maxime@cerno.tech/

And the discussions that occured recently on the mailing lists and IRC about
this.

The series mentioned above had multiple issues, the main one being that it was
a bit too much complicated for what we wanted to achieve. This series is taking
a much simpler approach with an ad-hoc solution.

I think some parts of it could still be moved to KMS helpers (notably, the
output format enum, and the helper to set the infoframe for it) and structures
(the output format stored in drm_connector_state). This would also interact
nicely with the work done here:

https://lore.kernel.org/dri-devel/20211118103814.524670-1-maxime@cerno.tech/

This can come as a second step though.

The other issues with the first attempt was that nothing was reported to
userspace about the decision we made about the format, and that this decision
was essentially policy, without any way for the userspace to influence it.

Those two points however are being worked on by Werner in a cross-driver
effort:

https://lore.kernel.org/dri-devel/e452775c-5b95-bbfd-e818-f1480f556336@tuxedocomputers.com/

Since it's a KMS decision, I don't think we should hold off any driver as long
as it's consistent with what the other drivers are doing.

Let me know what you think,
Maxime

---

Changes from v2:
  - Rename the output format enum
  - Split the edid_hdmi_dc_modes in two for RGB444 and YUV444
  - Remove color_formats modifications from _parse_deep_color entirely
  - Fixed comment formatting
  - Fixed mode_valid that would always return true
  - Fixed max_tmds_clock handling

Changes from v1:
  - Fixed an EDID parsing error for YUV422
  - Fixed the scrambling setup when using a bpc > 8
  - Added some logging
  - Fixed some build-bot warnings
  - Fixed a number of HDMI specifications and EDID issues
  - Try to max out the bpc every time

Maxime Ripard (16):
  drm/edid: Rename drm_hdmi_avi_infoframe_colorspace to _colorimetry
  drm/edid: Don't clear formats if using deep color
  drm/edid: Split deep color modes between RGB and YUV444
  drm/connector: Fix typo in output format
  drm/vc4: hdmi: Add full range RGB helper
  drm/vc4: hdmi: Use full range helper in csc functions
  drm/vc4: hdmi: Move XBAR setup to csc_setup
  drm/vc4: hdmi: Replace CSC_CTL hardcoded value by defines
  drm/vc4: hdmi: Define colorspace matrices
  drm/vc4: hdmi: Change CSC callback prototype
  drm/vc4: hdmi: Move clock validation to its own function
  drm/vc4: hdmi: Move clock calculation into its own function
  drm/vc4: hdmi: Take the sink maximum TMDS clock into account
  drm/vc4: hdmi: Take bpp into account for the scrambler
  drm/vc4: hdmi: Always try to have the highest bpc
  drm/vc4: hdmi: Support HDMI YUV output

 .../gpu/drm/amd/amdgpu/amdgpu_connectors.c    |   2 +-
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |   2 +-
 .../arm/display/komeda/d71/d71_component.c    |  12 +-
 drivers/gpu/drm/bridge/adv7511/adv7511_drv.c  |   2 +-
 .../drm/bridge/analogix/analogix_dp_core.c    |   4 +-
 .../drm/bridge/cadence/cdns-mhdp8546-core.c   |  18 +-
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c     |  16 +-
 drivers/gpu/drm/drm_edid.c                    |  39 +-
 drivers/gpu/drm/i915/display/intel_hdmi.c     |   6 +-
 drivers/gpu/drm/i915/display/intel_lspcon.c   |   2 +-
 drivers/gpu/drm/radeon/radeon_connectors.c    |   2 +-
 .../gpu/drm/rockchip/analogix_dp-rockchip.c   |   2 +-
 drivers/gpu/drm/vc4/vc4_hdmi.c                | 522 +++++++++++++++---
 drivers/gpu/drm/vc4/vc4_hdmi.h                |  26 +-
 drivers/gpu/drm/vc4/vc4_hdmi_regs.h           |   6 +
 drivers/gpu/drm/vc4/vc4_regs.h                |  19 +
 include/drm/drm_connector.h                   |  18 +-
 include/drm/drm_edid.h                        |   4 +-
 18 files changed, 552 insertions(+), 150 deletions(-)

-- 
2.34.1


^ permalink raw reply	[flat|nested] 19+ messages in thread

* [PATCH v3 01/16] drm/edid: Rename drm_hdmi_avi_infoframe_colorspace to _colorimetry
  2022-01-13 14:07 [PATCH v3 00/16] drm/vc4: hdmi: Yet Another Approach to HDMI YUV output Maxime Ripard
@ 2022-01-13 14:07 ` Maxime Ripard
  2022-01-13 14:07 ` [PATCH v3 02/16] drm/edid: Don't clear formats if using deep color Maxime Ripard
                   ` (14 subsequent siblings)
  15 siblings, 0 replies; 19+ messages in thread
From: Maxime Ripard @ 2022-01-13 14:07 UTC (permalink / raw)
  To: Daniel Vetter, David Airlie, Maarten Lankhorst,
	Thomas Zimmermann, Maxime Ripard
  Cc: Dom Cobley, Tim Gover, Dave Stevenson, Werner Sembach, dri-devel,
	Phil Elwell

The drm_hdmi_avi_infoframe_colorspace() function actually sets the
colorimetry and extended_colorimetry fields in the hdmi_avi_infoframe
structure with DRM_MODE_COLORIMETRY_* values.

To make things worse, the hdmi_avi_infoframe structure also has a
colorspace field used to signal whether an RGB or YUV output is being
used.

Let's remove the inconsistency and allow for the colorspace usage by
renaming the function.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/drm_edid.c                  | 8 ++++----
 drivers/gpu/drm/i915/display/intel_hdmi.c   | 2 +-
 drivers/gpu/drm/i915/display/intel_lspcon.c | 2 +-
 drivers/gpu/drm/vc4/vc4_hdmi.c              | 2 +-
 include/drm/drm_edid.h                      | 4 ++--
 5 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 12893e7be89b..13644dd579b4 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -5891,13 +5891,13 @@ static const u32 hdmi_colorimetry_val[] = {
 #undef ACE
 
 /**
- * drm_hdmi_avi_infoframe_colorspace() - fill the HDMI AVI infoframe
- *                                       colorspace information
+ * drm_hdmi_avi_infoframe_colorimetry() - fill the HDMI AVI infoframe
+ *                                       colorimetry information
  * @frame: HDMI AVI infoframe
  * @conn_state: connector state
  */
 void
-drm_hdmi_avi_infoframe_colorspace(struct hdmi_avi_infoframe *frame,
+drm_hdmi_avi_infoframe_colorimetry(struct hdmi_avi_infoframe *frame,
 				  const struct drm_connector_state *conn_state)
 {
 	u32 colorimetry_val;
@@ -5916,7 +5916,7 @@ drm_hdmi_avi_infoframe_colorspace(struct hdmi_avi_infoframe *frame,
 	frame->extended_colorimetry = (colorimetry_val >> 2) &
 					EXTENDED_COLORIMETRY_MASK;
 }
-EXPORT_SYMBOL(drm_hdmi_avi_infoframe_colorspace);
+EXPORT_SYMBOL(drm_hdmi_avi_infoframe_colorimetry);
 
 /**
  * drm_hdmi_avi_infoframe_quant_range() - fill the HDMI AVI infoframe
diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
index 3b5b9e7b05b7..96e508ddc4af 100644
--- a/drivers/gpu/drm/i915/display/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
@@ -730,7 +730,7 @@ intel_hdmi_compute_avi_infoframe(struct intel_encoder *encoder,
 	else
 		frame->colorspace = HDMI_COLORSPACE_RGB;
 
-	drm_hdmi_avi_infoframe_colorspace(frame, conn_state);
+	drm_hdmi_avi_infoframe_colorimetry(frame, conn_state);
 
 	/* nonsense combination */
 	drm_WARN_ON(encoder->base.dev, crtc_state->limited_color_range &&
diff --git a/drivers/gpu/drm/i915/display/intel_lspcon.c b/drivers/gpu/drm/i915/display/intel_lspcon.c
index 05d2d750fa53..092a925c6cf5 100644
--- a/drivers/gpu/drm/i915/display/intel_lspcon.c
+++ b/drivers/gpu/drm/i915/display/intel_lspcon.c
@@ -537,7 +537,7 @@ void lspcon_set_infoframes(struct intel_encoder *encoder,
 		frame.avi.colorspace = HDMI_COLORSPACE_RGB;
 
 	/* Set the Colorspace as per the HDMI spec */
-	drm_hdmi_avi_infoframe_colorspace(&frame.avi, conn_state);
+	drm_hdmi_avi_infoframe_colorimetry(&frame.avi, conn_state);
 
 	/* nonsense combination */
 	drm_WARN_ON(encoder->base.dev, crtc_state->limited_color_range &&
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 053fbaf765ca..be39e55ae113 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -502,7 +502,7 @@ static void vc4_hdmi_set_avi_infoframe(struct drm_encoder *encoder)
 					   vc4_encoder->limited_rgb_range ?
 					   HDMI_QUANTIZATION_RANGE_LIMITED :
 					   HDMI_QUANTIZATION_RANGE_FULL);
-	drm_hdmi_avi_infoframe_colorspace(&frame.avi, cstate);
+	drm_hdmi_avi_infoframe_colorimetry(&frame.avi, cstate);
 	drm_hdmi_avi_infoframe_bars(&frame.avi, cstate);
 
 	vc4_hdmi_write_infoframe(encoder, &frame);
diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
index 18f6c700f6d0..144c495b99c4 100644
--- a/include/drm/drm_edid.h
+++ b/include/drm/drm_edid.h
@@ -401,8 +401,8 @@ drm_hdmi_vendor_infoframe_from_display_mode(struct hdmi_vendor_infoframe *frame,
 					    const struct drm_display_mode *mode);
 
 void
-drm_hdmi_avi_infoframe_colorspace(struct hdmi_avi_infoframe *frame,
-				  const struct drm_connector_state *conn_state);
+drm_hdmi_avi_infoframe_colorimetry(struct hdmi_avi_infoframe *frame,
+				   const struct drm_connector_state *conn_state);
 
 void
 drm_hdmi_avi_infoframe_bars(struct hdmi_avi_infoframe *frame,
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [PATCH v3 02/16] drm/edid: Don't clear formats if using deep color
  2022-01-13 14:07 [PATCH v3 00/16] drm/vc4: hdmi: Yet Another Approach to HDMI YUV output Maxime Ripard
  2022-01-13 14:07 ` [PATCH v3 01/16] drm/edid: Rename drm_hdmi_avi_infoframe_colorspace to _colorimetry Maxime Ripard
@ 2022-01-13 14:07 ` Maxime Ripard
  2022-01-13 14:07 ` [PATCH v3 03/16] drm/edid: Split deep color modes between RGB and YUV444 Maxime Ripard
                   ` (13 subsequent siblings)
  15 siblings, 0 replies; 19+ messages in thread
From: Maxime Ripard @ 2022-01-13 14:07 UTC (permalink / raw)
  To: Daniel Vetter, David Airlie, Maarten Lankhorst,
	Thomas Zimmermann, Maxime Ripard
  Cc: Dom Cobley, Tim Gover, Dave Stevenson, Werner Sembach, dri-devel,
	Phil Elwell

The current code, when parsing the EDID Deep Color depths, that the
YUV422 cannot be used, referring to the HDMI 1.3 Specification.

This specification, in its section 6.2.4, indeed states:

  For each supported Deep Color mode, RGB 4:4:4 shall be supported and
  optionally YCBCR 4:4:4 may be supported.

  YCBCR 4:2:2 is not permitted for any Deep Color mode.

This indeed can be interpreted like the code does, but the HDMI 1.4
specification further clarifies that statement in its section 6.2.4:

  For each supported Deep Color mode, RGB 4:4:4 shall be supported and
  optionally YCBCR 4:4:4 may be supported.

  YCBCR 4:2:2 is also 36-bit mode but does not require the further use
  of the Deep Color modes described in section 6.5.2 and 6.5.3.

This means that, even though YUV422 can be used with 12 bit per color,
it shouldn't be treated as a deep color mode.

This is also broken with YUV444 if it's supported by the display, but
DRM_EDID_HDMI_DC_Y444 isn't set. In such a case, the code will clear
color_formats of the YUV444 support set previously in
drm_parse_cea_ext(), but will not set it back.

Since the formats supported are already setup properly in
drm_parse_cea_ext(), let's just remove the code modifying the formats in
drm_parse_hdmi_deep_color_info()

Fixes: d0c94692e0a3 ("drm/edid: Parse and handle HDMI deep color modes.")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/drm_edid.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 13644dd579b4..5085ef08c22d 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -5104,16 +5104,8 @@ static void drm_parse_hdmi_deep_color_info(struct drm_connector *connector,
 		  connector->name, dc_bpc);
 	info->bpc = dc_bpc;
 
-	/*
-	 * Deep color support mandates RGB444 support for all video
-	 * modes and forbids YCRCB422 support for all video modes per
-	 * HDMI 1.3 spec.
-	 */
-	info->color_formats = DRM_COLOR_FORMAT_RGB444;
-
 	/* YCRCB444 is optional according to spec. */
 	if (hdmi[6] & DRM_EDID_HDMI_DC_Y444) {
-		info->color_formats |= DRM_COLOR_FORMAT_YCRCB444;
 		DRM_DEBUG("%s: HDMI sink does YCRCB444 in deep color.\n",
 			  connector->name);
 	}
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [PATCH v3 03/16] drm/edid: Split deep color modes between RGB and YUV444
  2022-01-13 14:07 [PATCH v3 00/16] drm/vc4: hdmi: Yet Another Approach to HDMI YUV output Maxime Ripard
  2022-01-13 14:07 ` [PATCH v3 01/16] drm/edid: Rename drm_hdmi_avi_infoframe_colorspace to _colorimetry Maxime Ripard
  2022-01-13 14:07 ` [PATCH v3 02/16] drm/edid: Don't clear formats if using deep color Maxime Ripard
@ 2022-01-13 14:07 ` Maxime Ripard
  2022-01-13 14:07 ` [PATCH v3 04/16] drm/connector: Fix typo in output format Maxime Ripard
                   ` (12 subsequent siblings)
  15 siblings, 0 replies; 19+ messages in thread
From: Maxime Ripard @ 2022-01-13 14:07 UTC (permalink / raw)
  To: Daniel Vetter, David Airlie, Maarten Lankhorst,
	Thomas Zimmermann, Maxime Ripard
  Cc: Dom Cobley, Tim Gover, Dave Stevenson, Werner Sembach, dri-devel,
	Phil Elwell

The current code assumes that the RGB444 and YUV444 formats are the
same, but the HDMI 2.0 specification states that:

   The three DC_XXbit bits above only indicate support for RGB 4:4:4 at
   that pixel size. Support for YCBCR 4:4:4 in Deep Color modes is
   indicated with the DC_Y444 bit. If DC_Y444 is set, then YCBCR 4:4:4
   is supported for all modes indicated by the DC_XXbit flags.

So if we have YUV444 support and any DC_XXbit flag set but the DC_Y444
flag isn't, we'll assume that we support that deep colour mode for
YUV444 which breaks the specification.

In order to fix this, let's split the edid_hdmi_dc_modes field in struct
drm_display_info into two fields, one for RGB444 and one for YUV444.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: d0c94692e0a3 ("drm/edid: Parse and handle HDMI deep color modes.")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c |  2 +-
 drivers/gpu/drm/drm_edid.c                     |  7 ++++---
 drivers/gpu/drm/i915/display/intel_hdmi.c      |  4 ++--
 drivers/gpu/drm/radeon/radeon_connectors.c     |  2 +-
 include/drm/drm_connector.h                    | 12 +++++++++---
 5 files changed, 17 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c
index c16a2704ced6..f3160b951df3 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c
@@ -175,7 +175,7 @@ int amdgpu_connector_get_monitor_bpc(struct drm_connector *connector)
 
 			/* Check if bpc is within clock limit. Try to degrade gracefully otherwise */
 			if ((bpc == 12) && (mode_clock * 3/2 > max_tmds_clock)) {
-				if ((connector->display_info.edid_hdmi_dc_modes & DRM_EDID_HDMI_DC_30) &&
+				if ((connector->display_info.edid_hdmi_rgb444_dc_modes & DRM_EDID_HDMI_DC_30) &&
 				    (mode_clock * 5/4 <= max_tmds_clock))
 					bpc = 10;
 				else
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 5085ef08c22d..471b577dca79 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -5075,21 +5075,21 @@ static void drm_parse_hdmi_deep_color_info(struct drm_connector *connector,
 
 	if (hdmi[6] & DRM_EDID_HDMI_DC_30) {
 		dc_bpc = 10;
-		info->edid_hdmi_dc_modes |= DRM_EDID_HDMI_DC_30;
+		info->edid_hdmi_rgb444_dc_modes |= DRM_EDID_HDMI_DC_30;
 		DRM_DEBUG("%s: HDMI sink does deep color 30.\n",
 			  connector->name);
 	}
 
 	if (hdmi[6] & DRM_EDID_HDMI_DC_36) {
 		dc_bpc = 12;
-		info->edid_hdmi_dc_modes |= DRM_EDID_HDMI_DC_36;
+		info->edid_hdmi_rgb444_dc_modes |= DRM_EDID_HDMI_DC_36;
 		DRM_DEBUG("%s: HDMI sink does deep color 36.\n",
 			  connector->name);
 	}
 
 	if (hdmi[6] & DRM_EDID_HDMI_DC_48) {
 		dc_bpc = 16;
-		info->edid_hdmi_dc_modes |= DRM_EDID_HDMI_DC_48;
+		info->edid_hdmi_rgb444_dc_modes |= DRM_EDID_HDMI_DC_48;
 		DRM_DEBUG("%s: HDMI sink does deep color 48.\n",
 			  connector->name);
 	}
@@ -5106,6 +5106,7 @@ static void drm_parse_hdmi_deep_color_info(struct drm_connector *connector,
 
 	/* YCRCB444 is optional according to spec. */
 	if (hdmi[6] & DRM_EDID_HDMI_DC_Y444) {
+		info->edid_hdmi_ycbcr444_dc_modes = info->edid_hdmi_rgb444_dc_modes;
 		DRM_DEBUG("%s: HDMI sink does YCRCB444 in deep color.\n",
 			  connector->name);
 	}
diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
index 96e508ddc4af..52f6dc248453 100644
--- a/drivers/gpu/drm/i915/display/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
@@ -1912,7 +1912,7 @@ static bool intel_hdmi_sink_bpc_possible(struct drm_connector *connector,
 		if (ycbcr420_output)
 			return hdmi->y420_dc_modes & DRM_EDID_YCBCR420_DC_36;
 		else
-			return info->edid_hdmi_dc_modes & DRM_EDID_HDMI_DC_36;
+			return info->edid_hdmi_rgb444_dc_modes & DRM_EDID_HDMI_DC_36;
 	case 10:
 		if (!has_hdmi_sink)
 			return false;
@@ -1920,7 +1920,7 @@ static bool intel_hdmi_sink_bpc_possible(struct drm_connector *connector,
 		if (ycbcr420_output)
 			return hdmi->y420_dc_modes & DRM_EDID_YCBCR420_DC_30;
 		else
-			return info->edid_hdmi_dc_modes & DRM_EDID_HDMI_DC_30;
+			return info->edid_hdmi_rgb444_dc_modes & DRM_EDID_HDMI_DC_30;
 	case 8:
 		return true;
 	default:
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index 607ad5620bd9..1546abcadacf 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -204,7 +204,7 @@ int radeon_get_monitor_bpc(struct drm_connector *connector)
 
 			/* Check if bpc is within clock limit. Try to degrade gracefully otherwise */
 			if ((bpc == 12) && (mode_clock * 3/2 > max_tmds_clock)) {
-				if ((connector->display_info.edid_hdmi_dc_modes & DRM_EDID_HDMI_DC_30) &&
+				if ((connector->display_info.edid_hdmi_rgb444_dc_modes & DRM_EDID_HDMI_DC_30) &&
 					(mode_clock * 5/4 <= max_tmds_clock))
 					bpc = 10;
 				else
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index b501d0badaea..eaf0ef5f1843 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -592,10 +592,16 @@ struct drm_display_info {
 	bool rgb_quant_range_selectable;
 
 	/**
-	 * @edid_hdmi_dc_modes: Mask of supported hdmi deep color modes. Even
-	 * more stuff redundant with @bus_formats.
+	 * @edid_hdmi_dc_rgb444_modes: Mask of supported hdmi deep color modes
+	 * in RGB 4:4:4. Even more stuff redundant with @bus_formats.
 	 */
-	u8 edid_hdmi_dc_modes;
+	u8 edid_hdmi_rgb444_dc_modes;
+
+	/**
+	 * @edid_hdmi_dc_ycbcr444_modes: Mask of supported hdmi deep color
+	 * modes in YCbCr 4:4:4. Even more stuff redundant with @bus_formats.
+	 */
+	u8 edid_hdmi_ycbcr444_dc_modes;
 
 	/**
 	 * @cea_rev: CEA revision of the HDMI sink.
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [PATCH v3 04/16] drm/connector: Fix typo in output format
  2022-01-13 14:07 [PATCH v3 00/16] drm/vc4: hdmi: Yet Another Approach to HDMI YUV output Maxime Ripard
                   ` (2 preceding siblings ...)
  2022-01-13 14:07 ` [PATCH v3 03/16] drm/edid: Split deep color modes between RGB and YUV444 Maxime Ripard
@ 2022-01-13 14:07 ` Maxime Ripard
  2022-01-13 20:16     ` kernel test robot
  2022-01-13 14:07 ` [PATCH v3 05/16] drm/vc4: hdmi: Add full range RGB helper Maxime Ripard
                   ` (11 subsequent siblings)
  15 siblings, 1 reply; 19+ messages in thread
From: Maxime Ripard @ 2022-01-13 14:07 UTC (permalink / raw)
  To: Daniel Vetter, David Airlie, Maarten Lankhorst,
	Thomas Zimmermann, Maxime Ripard
  Cc: Dom Cobley, Tim Gover, Dave Stevenson, Werner Sembach, dri-devel,
	Phil Elwell

The HDMI specification mentions YCbCr everywhere, but our enums have
YCrCb. Let's rename it to match.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c  |  2 +-
 .../drm/arm/display/komeda/d71/d71_component.c | 12 ++++++------
 drivers/gpu/drm/bridge/adv7511/adv7511_drv.c   |  2 +-
 .../gpu/drm/bridge/analogix/analogix_dp_core.c |  4 ++--
 .../drm/bridge/cadence/cdns-mhdp8546-core.c    | 18 +++++++++---------
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c      | 16 ++++++++--------
 drivers/gpu/drm/drm_edid.c                     | 16 ++++++++--------
 .../gpu/drm/rockchip/analogix_dp-rockchip.c    |  2 +-
 include/drm/drm_connector.h                    |  6 +++---
 9 files changed, 39 insertions(+), 39 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 1b545fe0fc94..0d060fd07b27 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -5851,7 +5851,7 @@ static void fill_stream_properties_from_drm_display_mode(
 	else if (drm_mode_is_420_also(info, mode_in)
 			&& aconnector->force_yuv420_output)
 		timing_out->pixel_encoding = PIXEL_ENCODING_YCBCR420;
-	else if ((connector->display_info.color_formats & DRM_COLOR_FORMAT_YCRCB444)
+	else if ((connector->display_info.color_formats & DRM_COLOR_FORMAT_YCBCR444)
 			&& stream->signal == SIGNAL_TYPE_HDMI_TYPE_A)
 		timing_out->pixel_encoding = PIXEL_ENCODING_YCBCR444;
 	else
diff --git a/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c b/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
index 8a02ade369db..42510fdea27e 100644
--- a/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
+++ b/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
@@ -1078,11 +1078,11 @@ static void d71_improc_update(struct komeda_component *c,
 	mask |= IPS_CTRL_YUV | IPS_CTRL_CHD422 | IPS_CTRL_CHD420;
 
 	/* config color format */
-	if (st->color_format == DRM_COLOR_FORMAT_YCRCB420)
+	if (st->color_format == DRM_COLOR_FORMAT_YCBCR420)
 		ctrl |= IPS_CTRL_YUV | IPS_CTRL_CHD422 | IPS_CTRL_CHD420;
-	else if (st->color_format == DRM_COLOR_FORMAT_YCRCB422)
+	else if (st->color_format == DRM_COLOR_FORMAT_YCBCR422)
 		ctrl |= IPS_CTRL_YUV | IPS_CTRL_CHD422;
-	else if (st->color_format == DRM_COLOR_FORMAT_YCRCB444)
+	else if (st->color_format == DRM_COLOR_FORMAT_YCBCR444)
 		ctrl |= IPS_CTRL_YUV;
 
 	malidp_write32_mask(reg, BLK_CONTROL, mask, ctrl);
@@ -1144,11 +1144,11 @@ static int d71_improc_init(struct d71_dev *d71,
 	improc = to_improc(c);
 	improc->supported_color_depths = BIT(8) | BIT(10);
 	improc->supported_color_formats = DRM_COLOR_FORMAT_RGB444 |
-					  DRM_COLOR_FORMAT_YCRCB444 |
-					  DRM_COLOR_FORMAT_YCRCB422;
+					  DRM_COLOR_FORMAT_YCBCR444 |
+					  DRM_COLOR_FORMAT_YCBCR422;
 	value = malidp_read32(reg, BLK_INFO);
 	if (value & IPS_INFO_CHD420)
-		improc->supported_color_formats |= DRM_COLOR_FORMAT_YCRCB420;
+		improc->supported_color_formats |= DRM_COLOR_FORMAT_YCBCR420;
 
 	improc->supports_csc = true;
 	improc->supports_gamma = true;
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index f8e5da148599..a694988d991d 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -223,7 +223,7 @@ static void adv7511_set_config_csc(struct adv7511 *adv7511,
 		config.csc_coefficents = adv7511_csc_ycbcr_to_rgb;
 
 		if ((connector->display_info.color_formats &
-		     DRM_COLOR_FORMAT_YCRCB422) &&
+		     DRM_COLOR_FORMAT_YCBCR422) &&
 		    config.hdmi_mode) {
 			config.csc_enable = false;
 			config.avi_infoframe.colorspace =
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index b7d2e4449cfa..eb590fb8e8d0 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1537,9 +1537,9 @@ static void analogix_dp_bridge_mode_set(struct drm_bridge *bridge,
 		video->color_depth = COLOR_8;
 		break;
 	}
-	if (display_info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
+	if (display_info->color_formats & DRM_COLOR_FORMAT_YCBCR444)
 		video->color_space = COLOR_YCBCR444;
-	else if (display_info->color_formats & DRM_COLOR_FORMAT_YCRCB422)
+	else if (display_info->color_formats & DRM_COLOR_FORMAT_YCBCR422)
 		video->color_space = COLOR_YCBCR422;
 	else
 		video->color_space = COLOR_RGB;
diff --git a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
index 5530fbf64f1e..11f5aa754b91 100644
--- a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
@@ -1553,13 +1553,13 @@ static u32 cdns_mhdp_get_bpp(struct cdns_mhdp_display_fmt *fmt)
 
 	switch (fmt->color_format) {
 	case DRM_COLOR_FORMAT_RGB444:
-	case DRM_COLOR_FORMAT_YCRCB444:
+	case DRM_COLOR_FORMAT_YCBCR444:
 		bpp = fmt->bpc * 3;
 		break;
-	case DRM_COLOR_FORMAT_YCRCB422:
+	case DRM_COLOR_FORMAT_YCBCR422:
 		bpp = fmt->bpc * 2;
 		break;
-	case DRM_COLOR_FORMAT_YCRCB420:
+	case DRM_COLOR_FORMAT_YCBCR420:
 		bpp = fmt->bpc * 3 / 2;
 		break;
 	default:
@@ -1767,8 +1767,8 @@ static void cdns_mhdp_configure_video(struct cdns_mhdp_device *mhdp,
 	 * If YCBCR supported and stream not SD, use ITU709
 	 * Need to handle ITU version with YCBCR420 when supported
 	 */
-	if ((pxlfmt == DRM_COLOR_FORMAT_YCRCB444 ||
-	     pxlfmt == DRM_COLOR_FORMAT_YCRCB422) && mode->crtc_vdisplay >= 720)
+	if ((pxlfmt == DRM_COLOR_FORMAT_YCBCR444 ||
+	     pxlfmt == DRM_COLOR_FORMAT_YCBCR422) && mode->crtc_vdisplay >= 720)
 		misc0 = DP_YCBCR_COEFFICIENTS_ITU709;
 
 	bpp = cdns_mhdp_get_bpp(&mhdp->display_fmt);
@@ -1778,15 +1778,15 @@ static void cdns_mhdp_configure_video(struct cdns_mhdp_device *mhdp,
 		pxl_repr = CDNS_DP_FRAMER_RGB << CDNS_DP_FRAMER_PXL_FORMAT;
 		misc0 |= DP_COLOR_FORMAT_RGB;
 		break;
-	case DRM_COLOR_FORMAT_YCRCB444:
+	case DRM_COLOR_FORMAT_YCBCR444:
 		pxl_repr = CDNS_DP_FRAMER_YCBCR444 << CDNS_DP_FRAMER_PXL_FORMAT;
 		misc0 |= DP_COLOR_FORMAT_YCbCr444 | DP_TEST_DYNAMIC_RANGE_CEA;
 		break;
-	case DRM_COLOR_FORMAT_YCRCB422:
+	case DRM_COLOR_FORMAT_YCBCR422:
 		pxl_repr = CDNS_DP_FRAMER_YCBCR422 << CDNS_DP_FRAMER_PXL_FORMAT;
 		misc0 |= DP_COLOR_FORMAT_YCbCr422 | DP_TEST_DYNAMIC_RANGE_CEA;
 		break;
-	case DRM_COLOR_FORMAT_YCRCB420:
+	case DRM_COLOR_FORMAT_YCBCR420:
 		pxl_repr = CDNS_DP_FRAMER_YCBCR420 << CDNS_DP_FRAMER_PXL_FORMAT;
 		break;
 	default:
@@ -1882,7 +1882,7 @@ static void cdns_mhdp_configure_video(struct cdns_mhdp_device *mhdp,
 	if (mhdp->display_fmt.y_only)
 		misc1 |= CDNS_DP_TEST_COLOR_FORMAT_RAW_Y_ONLY;
 	/* Use VSC SDP for Y420 */
-	if (pxlfmt == DRM_COLOR_FORMAT_YCRCB420)
+	if (pxlfmt == DRM_COLOR_FORMAT_YCBCR420)
 		misc1 = CDNS_DP_TEST_VSC_SDP;
 
 	cdns_mhdp_reg_write(mhdp, CDNS_DP_MSA_MISC(stream_id),
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 54d8fdad395f..b0d8110dd412 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2540,7 +2540,7 @@ static u32 *dw_hdmi_bridge_atomic_get_output_bus_fmts(struct drm_bridge *bridge,
 	struct drm_display_mode *mode = &crtc_state->mode;
 	u8 max_bpc = conn_state->max_requested_bpc;
 	bool is_hdmi2_sink = info->hdmi.scdc.supported ||
-			     (info->color_formats & DRM_COLOR_FORMAT_YCRCB420);
+			     (info->color_formats & DRM_COLOR_FORMAT_YCBCR420);
 	u32 *output_fmts;
 	unsigned int i = 0;
 
@@ -2594,36 +2594,36 @@ static u32 *dw_hdmi_bridge_atomic_get_output_bus_fmts(struct drm_bridge *bridge,
 	 */
 
 	if (max_bpc >= 16 && info->bpc == 16) {
-		if (info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
+		if (info->color_formats & DRM_COLOR_FORMAT_YCBCR444)
 			output_fmts[i++] = MEDIA_BUS_FMT_YUV16_1X48;
 
 		output_fmts[i++] = MEDIA_BUS_FMT_RGB161616_1X48;
 	}
 
 	if (max_bpc >= 12 && info->bpc >= 12) {
-		if (info->color_formats & DRM_COLOR_FORMAT_YCRCB422)
+		if (info->color_formats & DRM_COLOR_FORMAT_YCBCR422)
 			output_fmts[i++] = MEDIA_BUS_FMT_UYVY12_1X24;
 
-		if (info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
+		if (info->color_formats & DRM_COLOR_FORMAT_YCBCR444)
 			output_fmts[i++] = MEDIA_BUS_FMT_YUV12_1X36;
 
 		output_fmts[i++] = MEDIA_BUS_FMT_RGB121212_1X36;
 	}
 
 	if (max_bpc >= 10 && info->bpc >= 10) {
-		if (info->color_formats & DRM_COLOR_FORMAT_YCRCB422)
+		if (info->color_formats & DRM_COLOR_FORMAT_YCBCR422)
 			output_fmts[i++] = MEDIA_BUS_FMT_UYVY10_1X20;
 
-		if (info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
+		if (info->color_formats & DRM_COLOR_FORMAT_YCBCR444)
 			output_fmts[i++] = MEDIA_BUS_FMT_YUV10_1X30;
 
 		output_fmts[i++] = MEDIA_BUS_FMT_RGB101010_1X30;
 	}
 
-	if (info->color_formats & DRM_COLOR_FORMAT_YCRCB422)
+	if (info->color_formats & DRM_COLOR_FORMAT_YCBCR422)
 		output_fmts[i++] = MEDIA_BUS_FMT_UYVY8_1X16;
 
-	if (info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
+	if (info->color_formats & DRM_COLOR_FORMAT_YCBCR444)
 		output_fmts[i++] = MEDIA_BUS_FMT_YUV8_1X24;
 
 	/* Default 8bit RGB fallback */
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 471b577dca79..1a1016f47989 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -3776,7 +3776,7 @@ static int do_y420vdb_modes(struct drm_connector *connector,
 	}
 
 	if (modes > 0)
-		info->color_formats |= DRM_COLOR_FORMAT_YCRCB420;
+		info->color_formats |= DRM_COLOR_FORMAT_YCBCR420;
 	return modes;
 }
 
@@ -4279,7 +4279,7 @@ static void drm_parse_y420cmdb_bitmap(struct drm_connector *connector,
 	if (map_len == 0) {
 		/* All CEA modes support ycbcr420 sampling also.*/
 		hdmi->y420_cmdb_map = U64_MAX;
-		info->color_formats |= DRM_COLOR_FORMAT_YCRCB420;
+		info->color_formats |= DRM_COLOR_FORMAT_YCBCR420;
 		return;
 	}
 
@@ -4302,7 +4302,7 @@ static void drm_parse_y420cmdb_bitmap(struct drm_connector *connector,
 		map |= (u64)db[2 + count] << (8 * count);
 
 	if (map)
-		info->color_formats |= DRM_COLOR_FORMAT_YCRCB420;
+		info->color_formats |= DRM_COLOR_FORMAT_YCBCR420;
 
 	hdmi->y420_cmdb_map = map;
 }
@@ -5158,9 +5158,9 @@ static void drm_parse_cea_ext(struct drm_connector *connector,
 	/* The existence of a CEA block should imply RGB support */
 	info->color_formats = DRM_COLOR_FORMAT_RGB444;
 	if (edid_ext[3] & EDID_CEA_YCRCB444)
-		info->color_formats |= DRM_COLOR_FORMAT_YCRCB444;
+		info->color_formats |= DRM_COLOR_FORMAT_YCBCR444;
 	if (edid_ext[3] & EDID_CEA_YCRCB422)
-		info->color_formats |= DRM_COLOR_FORMAT_YCRCB422;
+		info->color_formats |= DRM_COLOR_FORMAT_YCBCR422;
 
 	if (cea_db_offsets(edid_ext, &start, &end))
 		return;
@@ -5388,9 +5388,9 @@ u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edi
 
 	info->color_formats |= DRM_COLOR_FORMAT_RGB444;
 	if (edid->features & DRM_EDID_FEATURE_RGB_YCRCB444)
-		info->color_formats |= DRM_COLOR_FORMAT_YCRCB444;
+		info->color_formats |= DRM_COLOR_FORMAT_YCBCR444;
 	if (edid->features & DRM_EDID_FEATURE_RGB_YCRCB422)
-		info->color_formats |= DRM_COLOR_FORMAT_YCRCB422;
+		info->color_formats |= DRM_COLOR_FORMAT_YCBCR422;
 
 	drm_update_mso(connector, edid);
 
@@ -5645,7 +5645,7 @@ static bool is_hdmi2_sink(const struct drm_connector *connector)
 		return true;
 
 	return connector->display_info.hdmi.scdc.supported ||
-		connector->display_info.color_formats & DRM_COLOR_FORMAT_YCRCB420;
+		connector->display_info.color_formats & DRM_COLOR_FORMAT_YCBCR420;
 }
 
 static inline bool is_eotf_supported(u8 output_eotf, u8 sink_eotf)
diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
index 8abb5ac26807..24a2d09df873 100644
--- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -117,7 +117,7 @@ static int rockchip_dp_get_modes(struct analogix_dp_plat_data *plat_data,
 {
 	struct drm_display_info *di = &connector->display_info;
 	/* VOP couldn't output YUV video format for eDP rightly */
-	u32 mask = DRM_COLOR_FORMAT_YCRCB444 | DRM_COLOR_FORMAT_YCRCB422;
+	u32 mask = DRM_COLOR_FORMAT_YCBCR444 | DRM_COLOR_FORMAT_YCRCB422;
 
 	if ((di->color_formats & mask)) {
 		DRM_DEBUG_KMS("Swapping display color format from YUV to RGB\n");
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index eaf0ef5f1843..64cf5f88c05b 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -522,9 +522,9 @@ struct drm_display_info {
 	enum subpixel_order subpixel_order;
 
 #define DRM_COLOR_FORMAT_RGB444		(1<<0)
-#define DRM_COLOR_FORMAT_YCRCB444	(1<<1)
-#define DRM_COLOR_FORMAT_YCRCB422	(1<<2)
-#define DRM_COLOR_FORMAT_YCRCB420	(1<<3)
+#define DRM_COLOR_FORMAT_YCBCR444	(1<<1)
+#define DRM_COLOR_FORMAT_YCBCR422	(1<<2)
+#define DRM_COLOR_FORMAT_YCBCR420	(1<<3)
 
 	/**
 	 * @panel_orientation: Read only connector property for built-in panels,
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [PATCH v3 05/16] drm/vc4: hdmi: Add full range RGB helper
  2022-01-13 14:07 [PATCH v3 00/16] drm/vc4: hdmi: Yet Another Approach to HDMI YUV output Maxime Ripard
                   ` (3 preceding siblings ...)
  2022-01-13 14:07 ` [PATCH v3 04/16] drm/connector: Fix typo in output format Maxime Ripard
@ 2022-01-13 14:07 ` Maxime Ripard
  2022-01-13 14:07 ` [PATCH v3 06/16] drm/vc4: hdmi: Use full range helper in csc functions Maxime Ripard
                   ` (10 subsequent siblings)
  15 siblings, 0 replies; 19+ messages in thread
From: Maxime Ripard @ 2022-01-13 14:07 UTC (permalink / raw)
  To: Daniel Vetter, David Airlie, Maarten Lankhorst,
	Thomas Zimmermann, Maxime Ripard
  Cc: Dom Cobley, Tim Gover, Dave Stevenson, Werner Sembach, dri-devel,
	Phil Elwell

We're going to need to tell whether we want to run with a full or
limited range RGB output in multiple places in the code, so let's create
a helper that will return whether we need with full range or not.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index be39e55ae113..7966e3b00332 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -104,6 +104,15 @@ static bool vc4_hdmi_mode_needs_scrambling(const struct drm_display_mode *mode)
 	return (mode->clock * 1000) > HDMI_14_MAX_TMDS_CLK;
 }
 
+static bool vc4_hdmi_is_full_range_rgb(struct vc4_hdmi *vc4_hdmi,
+				       const struct drm_display_mode *mode)
+{
+	struct vc4_hdmi_encoder *vc4_encoder = &vc4_hdmi->encoder;
+
+	return !vc4_encoder->hdmi_monitor ||
+		drm_default_rgb_quant_range(mode) == HDMI_QUANTIZATION_RANGE_FULL;
+}
+
 static int vc4_hdmi_debugfs_regs(struct seq_file *m, void *unused)
 {
 	struct drm_info_node *node = (struct drm_info_node *)m->private;
@@ -1119,8 +1128,7 @@ static void vc4_hdmi_encoder_pre_crtc_enable(struct drm_encoder *encoder,
 
 	mutex_lock(&vc4_hdmi->mutex);
 
-	if (vc4_encoder->hdmi_monitor &&
-	    drm_default_rgb_quant_range(mode) == HDMI_QUANTIZATION_RANGE_LIMITED) {
+	if (!vc4_hdmi_is_full_range_rgb(vc4_hdmi, mode)) {
 		if (vc4_hdmi->variant->csc_setup)
 			vc4_hdmi->variant->csc_setup(vc4_hdmi, true);
 
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [PATCH v3 06/16] drm/vc4: hdmi: Use full range helper in csc functions
  2022-01-13 14:07 [PATCH v3 00/16] drm/vc4: hdmi: Yet Another Approach to HDMI YUV output Maxime Ripard
                   ` (4 preceding siblings ...)
  2022-01-13 14:07 ` [PATCH v3 05/16] drm/vc4: hdmi: Add full range RGB helper Maxime Ripard
@ 2022-01-13 14:07 ` Maxime Ripard
  2022-01-13 14:07 ` [PATCH v3 07/16] drm/vc4: hdmi: Move XBAR setup to csc_setup Maxime Ripard
                   ` (9 subsequent siblings)
  15 siblings, 0 replies; 19+ messages in thread
From: Maxime Ripard @ 2022-01-13 14:07 UTC (permalink / raw)
  To: Daniel Vetter, David Airlie, Maarten Lankhorst,
	Thomas Zimmermann, Maxime Ripard
  Cc: Dom Cobley, Tim Gover, Dave Stevenson, Werner Sembach, dri-devel,
	Phil Elwell

The CSC callbacks takes a boolean as an argument to tell whether we're
using the full range or limited range RGB.

However, with the upcoming YUV support, the logic will be a bit more
complex. In order to address this, let's make the callbacks take the
entire mode, and call our new helper to tell whether the full or limited
range RGB should be used.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 31 +++++++++++--------------------
 drivers/gpu/drm/vc4/vc4_hdmi.h |  4 ++--
 2 files changed, 13 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 7966e3b00332..47ff4507f017 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -490,7 +490,6 @@ static void vc4_hdmi_write_infoframe(struct drm_encoder *encoder,
 static void vc4_hdmi_set_avi_infoframe(struct drm_encoder *encoder)
 {
 	struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
-	struct vc4_hdmi_encoder *vc4_encoder = to_vc4_hdmi_encoder(encoder);
 	struct drm_connector *connector = &vc4_hdmi->connector;
 	struct drm_connector_state *cstate = connector->state;
 	const struct drm_display_mode *mode = &vc4_hdmi->saved_adjusted_mode;
@@ -508,9 +507,9 @@ static void vc4_hdmi_set_avi_infoframe(struct drm_encoder *encoder)
 
 	drm_hdmi_avi_infoframe_quant_range(&frame.avi,
 					   connector, mode,
-					   vc4_encoder->limited_rgb_range ?
-					   HDMI_QUANTIZATION_RANGE_LIMITED :
-					   HDMI_QUANTIZATION_RANGE_FULL);
+					   vc4_hdmi_is_full_range_rgb(vc4_hdmi, mode) ?
+					   HDMI_QUANTIZATION_RANGE_FULL :
+					   HDMI_QUANTIZATION_RANGE_LIMITED);
 	drm_hdmi_avi_infoframe_colorimetry(&frame.avi, cstate);
 	drm_hdmi_avi_infoframe_bars(&frame.avi, cstate);
 
@@ -735,7 +734,8 @@ static void vc4_hdmi_encoder_disable(struct drm_encoder *encoder)
 	mutex_unlock(&vc4_hdmi->mutex);
 }
 
-static void vc4_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi, bool enable)
+static void vc4_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi,
+			       const struct drm_display_mode *mode)
 {
 	unsigned long flags;
 	u32 csc_ctl;
@@ -745,7 +745,7 @@ static void vc4_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi, bool enable)
 	csc_ctl = VC4_SET_FIELD(VC4_HD_CSC_CTL_ORDER_BGR,
 				VC4_HD_CSC_CTL_ORDER);
 
-	if (enable) {
+	if (!vc4_hdmi_is_full_range_rgb(vc4_hdmi, mode)) {
 		/* CEA VICs other than #1 requre limited range RGB
 		 * output unless overridden by an AVI infoframe.
 		 * Apply a colorspace conversion to squash 0-255 down
@@ -775,7 +775,8 @@ static void vc4_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi, bool enable)
 	spin_unlock_irqrestore(&vc4_hdmi->hw_lock, flags);
 }
 
-static void vc5_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi, bool enable)
+static void vc5_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi,
+			       const struct drm_display_mode *mode)
 {
 	unsigned long flags;
 	u32 csc_ctl;
@@ -784,7 +785,7 @@ static void vc5_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi, bool enable)
 
 	spin_lock_irqsave(&vc4_hdmi->hw_lock, flags);
 
-	if (enable) {
+	if (!vc4_hdmi_is_full_range_rgb(vc4_hdmi, mode)) {
 		/* CEA VICs other than #1 requre limited range RGB
 		 * output unless overridden by an AVI infoframe.
 		 * Apply a colorspace conversion to squash 0-255 down
@@ -1123,22 +1124,12 @@ static void vc4_hdmi_encoder_pre_crtc_enable(struct drm_encoder *encoder,
 {
 	struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
 	struct drm_display_mode *mode = &vc4_hdmi->saved_adjusted_mode;
-	struct vc4_hdmi_encoder *vc4_encoder = to_vc4_hdmi_encoder(encoder);
 	unsigned long flags;
 
 	mutex_lock(&vc4_hdmi->mutex);
 
-	if (!vc4_hdmi_is_full_range_rgb(vc4_hdmi, mode)) {
-		if (vc4_hdmi->variant->csc_setup)
-			vc4_hdmi->variant->csc_setup(vc4_hdmi, true);
-
-		vc4_encoder->limited_rgb_range = true;
-	} else {
-		if (vc4_hdmi->variant->csc_setup)
-			vc4_hdmi->variant->csc_setup(vc4_hdmi, false);
-
-		vc4_encoder->limited_rgb_range = false;
-	}
+	if (vc4_hdmi->variant->csc_setup)
+		vc4_hdmi->variant->csc_setup(vc4_hdmi, mode);
 
 	spin_lock_irqsave(&vc4_hdmi->hw_lock, flags);
 	HDMI_WRITE(HDMI_FIFO_CTL, VC4_HDMI_FIFO_CTL_MASTER_SLAVE_N);
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 36c0b082a43b..4a5536975bf6 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -12,7 +12,6 @@
 struct vc4_hdmi_encoder {
 	struct vc4_encoder base;
 	bool hdmi_monitor;
-	bool limited_rgb_range;
 };
 
 static inline struct vc4_hdmi_encoder *
@@ -77,7 +76,8 @@ struct vc4_hdmi_variant {
 	void (*reset)(struct vc4_hdmi *vc4_hdmi);
 
 	/* Callback to enable / disable the CSC */
-	void (*csc_setup)(struct vc4_hdmi *vc4_hdmi, bool enable);
+	void (*csc_setup)(struct vc4_hdmi *vc4_hdmi,
+			  const struct drm_display_mode *mode);
 
 	/* Callback to configure the video timings in the HDMI block */
 	void (*set_timings)(struct vc4_hdmi *vc4_hdmi,
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [PATCH v3 07/16] drm/vc4: hdmi: Move XBAR setup to csc_setup
  2022-01-13 14:07 [PATCH v3 00/16] drm/vc4: hdmi: Yet Another Approach to HDMI YUV output Maxime Ripard
                   ` (5 preceding siblings ...)
  2022-01-13 14:07 ` [PATCH v3 06/16] drm/vc4: hdmi: Use full range helper in csc functions Maxime Ripard
@ 2022-01-13 14:07 ` Maxime Ripard
  2022-01-13 14:07 ` [PATCH v3 08/16] drm/vc4: hdmi: Replace CSC_CTL hardcoded value by defines Maxime Ripard
                   ` (8 subsequent siblings)
  15 siblings, 0 replies; 19+ messages in thread
From: Maxime Ripard @ 2022-01-13 14:07 UTC (permalink / raw)
  To: Daniel Vetter, David Airlie, Maarten Lankhorst,
	Thomas Zimmermann, Maxime Ripard
  Cc: Dom Cobley, Tim Gover, Dave Stevenson, Werner Sembach, dri-devel,
	Phil Elwell

On the BCM2711, the HDMI_VEC_INTERFACE_XBAR register configuration
depends on whether we're using an RGB or YUV output. Let's move that
configuration to the CSC setup.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 47ff4507f017..0f8b1e907fae 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -785,6 +785,8 @@ static void vc5_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi,
 
 	spin_lock_irqsave(&vc4_hdmi->hw_lock, flags);
 
+	HDMI_WRITE(HDMI_VEC_INTERFACE_XBAR, 0x354021);
+
 	if (!vc4_hdmi_is_full_range_rgb(vc4_hdmi, mode)) {
 		/* CEA VICs other than #1 requre limited range RGB
 		 * output unless overridden by an AVI infoframe.
@@ -899,7 +901,6 @@ static void vc5_hdmi_set_timings(struct vc4_hdmi *vc4_hdmi,
 
 	spin_lock_irqsave(&vc4_hdmi->hw_lock, flags);
 
-	HDMI_WRITE(HDMI_VEC_INTERFACE_XBAR, 0x354021);
 	HDMI_WRITE(HDMI_HORZA,
 		   (vsync_pos ? VC5_HDMI_HORZA_VPOS : 0) |
 		   (hsync_pos ? VC5_HDMI_HORZA_HPOS : 0) |
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [PATCH v3 08/16] drm/vc4: hdmi: Replace CSC_CTL hardcoded value by defines
  2022-01-13 14:07 [PATCH v3 00/16] drm/vc4: hdmi: Yet Another Approach to HDMI YUV output Maxime Ripard
                   ` (6 preceding siblings ...)
  2022-01-13 14:07 ` [PATCH v3 07/16] drm/vc4: hdmi: Move XBAR setup to csc_setup Maxime Ripard
@ 2022-01-13 14:07 ` Maxime Ripard
  2022-01-13 14:07 ` [PATCH v3 09/16] drm/vc4: hdmi: Define colorspace matrices Maxime Ripard
                   ` (7 subsequent siblings)
  15 siblings, 0 replies; 19+ messages in thread
From: Maxime Ripard @ 2022-01-13 14:07 UTC (permalink / raw)
  To: Daniel Vetter, David Airlie, Maarten Lankhorst,
	Thomas Zimmermann, Maxime Ripard
  Cc: Dom Cobley, Tim Gover, Dave Stevenson, Werner Sembach, dri-devel,
	Phil Elwell

On BCM2711, the HDMI_CSC_CTL register value has been hardcoded to an
opaque value. Let's replace it with properly defined values.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 5 ++---
 drivers/gpu/drm/vc4/vc4_regs.h | 3 +++
 2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 0f8b1e907fae..682c3c907cbe 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -779,9 +779,8 @@ static void vc5_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi,
 			       const struct drm_display_mode *mode)
 {
 	unsigned long flags;
-	u32 csc_ctl;
-
-	csc_ctl = 0x07;	/* RGB_CONVERT_MODE = custom matrix, || USE_RGB_TO_YCBCR */
+	u32 csc_ctl = VC5_MT_CP_CSC_CTL_ENABLE | VC4_SET_FIELD(VC4_HD_CSC_CTL_MODE_CUSTOM,
+							       VC5_MT_CP_CSC_CTL_MODE);
 
 	spin_lock_irqsave(&vc4_hdmi->hw_lock, flags);
 
diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
index 7538b84a6dca..33410718089e 100644
--- a/drivers/gpu/drm/vc4/vc4_regs.h
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
@@ -774,6 +774,9 @@ enum {
 # define VC4_HD_CSC_CTL_RGB2YCC			BIT(1)
 # define VC4_HD_CSC_CTL_ENABLE			BIT(0)
 
+# define VC5_MT_CP_CSC_CTL_ENABLE		BIT(2)
+# define VC5_MT_CP_CSC_CTL_MODE_MASK		VC4_MASK(1, 0)
+
 # define VC4_DVP_HT_CLOCK_STOP_PIXEL		BIT(1)
 
 /* HVS display list information. */
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [PATCH v3 09/16] drm/vc4: hdmi: Define colorspace matrices
  2022-01-13 14:07 [PATCH v3 00/16] drm/vc4: hdmi: Yet Another Approach to HDMI YUV output Maxime Ripard
                   ` (7 preceding siblings ...)
  2022-01-13 14:07 ` [PATCH v3 08/16] drm/vc4: hdmi: Replace CSC_CTL hardcoded value by defines Maxime Ripard
@ 2022-01-13 14:07 ` Maxime Ripard
  2022-01-13 14:07 ` [PATCH v3 10/16] drm/vc4: hdmi: Change CSC callback prototype Maxime Ripard
                   ` (6 subsequent siblings)
  15 siblings, 0 replies; 19+ messages in thread
From: Maxime Ripard @ 2022-01-13 14:07 UTC (permalink / raw)
  To: Daniel Vetter, David Airlie, Maarten Lankhorst,
	Thomas Zimmermann, Maxime Ripard
  Cc: Dom Cobley, Tim Gover, Dave Stevenson, Werner Sembach, dri-devel,
	Phil Elwell

The current CSC setup code for the BCM2711 uses a sequence of register
writes to configure the CSC depending on whether we output using a full
or limited range.

However, with the upcoming introduction of the YUV output, we're going
to add new matrices to perform the conversions, so we should switch to
something a bit more flexible that takes the matrix as an argument and
programs the CSC accordingly.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 79 +++++++++++++++++++++-------------
 1 file changed, 50 insertions(+), 29 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 682c3c907cbe..7fdb49e790f3 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -775,6 +775,52 @@ static void vc4_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi,
 	spin_unlock_irqrestore(&vc4_hdmi->hw_lock, flags);
 }
 
+
+/*
+ * If we need to output Full Range RGB, then use the unity matrix
+ *
+ * [ 1      0      0      0]
+ * [ 0      1      0      0]
+ * [ 0      0      1      0]
+ *
+ * Matrix is signed 2p13 fixed point, with signed 9p6 offsets
+ */
+static const u16 vc5_hdmi_csc_full_rgb_unity[3][4] = {
+	{ 0x2000, 0x0000, 0x0000, 0x0000 },
+	{ 0x0000, 0x2000, 0x0000, 0x0000 },
+	{ 0x0000, 0x0000, 0x2000, 0x0000 },
+};
+
+/*
+ * CEA VICs other than #1 require limited range RGB output unless
+ * overridden by an AVI infoframe. Apply a colorspace conversion to
+ * squash 0-255 down to 16-235. The matrix here is:
+ *
+ * [ 0.8594 0      0      16]
+ * [ 0      0.8594 0      16]
+ * [ 0      0      0.8594 16]
+ *
+ * Matrix is signed 2p13 fixed point, with signed 9p6 offsets
+ */
+static const u16 vc5_hdmi_csc_full_rgb_to_limited_rgb[3][4] = {
+	{ 0x1b80, 0x0000, 0x0000, 0x0400 },
+	{ 0x0000, 0x1b80, 0x0000, 0x0400 },
+	{ 0x0000, 0x0000, 0x1b80, 0x0400 },
+};
+
+static void vc5_hdmi_set_csc_coeffs(struct vc4_hdmi *vc4_hdmi,
+				    const u16 coeffs[3][4])
+{
+	lockdep_assert_held(&vc4_hdmi->hw_lock);
+
+	HDMI_WRITE(HDMI_CSC_12_11, (coeffs[0][1] << 16) | coeffs[0][0]);
+	HDMI_WRITE(HDMI_CSC_14_13, (coeffs[0][3] << 16) | coeffs[0][2]);
+	HDMI_WRITE(HDMI_CSC_22_21, (coeffs[1][1] << 16) | coeffs[1][0]);
+	HDMI_WRITE(HDMI_CSC_24_23, (coeffs[1][3] << 16) | coeffs[1][2]);
+	HDMI_WRITE(HDMI_CSC_32_31, (coeffs[2][1] << 16) | coeffs[2][0]);
+	HDMI_WRITE(HDMI_CSC_34_33, (coeffs[2][3] << 16) | coeffs[2][2]);
+}
+
 static void vc5_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi,
 			       const struct drm_display_mode *mode)
 {
@@ -786,35 +832,10 @@ static void vc5_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi,
 
 	HDMI_WRITE(HDMI_VEC_INTERFACE_XBAR, 0x354021);
 
-	if (!vc4_hdmi_is_full_range_rgb(vc4_hdmi, mode)) {
-		/* CEA VICs other than #1 requre limited range RGB
-		 * output unless overridden by an AVI infoframe.
-		 * Apply a colorspace conversion to squash 0-255 down
-		 * to 16-235.  The matrix here is:
-		 *
-		 * [ 0.8594 0      0      16]
-		 * [ 0      0.8594 0      16]
-		 * [ 0      0      0.8594 16]
-		 * [ 0      0      0       1]
-		 * Matrix is signed 2p13 fixed point, with signed 9p6 offsets
-		 */
-		HDMI_WRITE(HDMI_CSC_12_11, (0x0000 << 16) | 0x1b80);
-		HDMI_WRITE(HDMI_CSC_14_13, (0x0400 << 16) | 0x0000);
-		HDMI_WRITE(HDMI_CSC_22_21, (0x1b80 << 16) | 0x0000);
-		HDMI_WRITE(HDMI_CSC_24_23, (0x0400 << 16) | 0x0000);
-		HDMI_WRITE(HDMI_CSC_32_31, (0x0000 << 16) | 0x0000);
-		HDMI_WRITE(HDMI_CSC_34_33, (0x0400 << 16) | 0x1b80);
-	} else {
-		/* Still use the matrix for full range, but make it unity.
-		 * Matrix is signed 2p13 fixed point, with signed 9p6 offsets
-		 */
-		HDMI_WRITE(HDMI_CSC_12_11, (0x0000 << 16) | 0x2000);
-		HDMI_WRITE(HDMI_CSC_14_13, (0x0000 << 16) | 0x0000);
-		HDMI_WRITE(HDMI_CSC_22_21, (0x2000 << 16) | 0x0000);
-		HDMI_WRITE(HDMI_CSC_24_23, (0x0000 << 16) | 0x0000);
-		HDMI_WRITE(HDMI_CSC_32_31, (0x0000 << 16) | 0x0000);
-		HDMI_WRITE(HDMI_CSC_34_33, (0x0000 << 16) | 0x2000);
-	}
+	if (!vc4_hdmi_is_full_range_rgb(vc4_hdmi, mode))
+		vc5_hdmi_set_csc_coeffs(vc4_hdmi, vc5_hdmi_csc_full_rgb_to_limited_rgb);
+	else
+		vc5_hdmi_set_csc_coeffs(vc4_hdmi, vc5_hdmi_csc_full_rgb_unity);
 
 	HDMI_WRITE(HDMI_CSC_CTL, csc_ctl);
 
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [PATCH v3 10/16] drm/vc4: hdmi: Change CSC callback prototype
  2022-01-13 14:07 [PATCH v3 00/16] drm/vc4: hdmi: Yet Another Approach to HDMI YUV output Maxime Ripard
                   ` (8 preceding siblings ...)
  2022-01-13 14:07 ` [PATCH v3 09/16] drm/vc4: hdmi: Define colorspace matrices Maxime Ripard
@ 2022-01-13 14:07 ` Maxime Ripard
  2022-01-13 14:07 ` [PATCH v3 11/16] drm/vc4: hdmi: Move clock validation to its own function Maxime Ripard
                   ` (5 subsequent siblings)
  15 siblings, 0 replies; 19+ messages in thread
From: Maxime Ripard @ 2022-01-13 14:07 UTC (permalink / raw)
  To: Daniel Vetter, David Airlie, Maarten Lankhorst,
	Thomas Zimmermann, Maxime Ripard
  Cc: Dom Cobley, Tim Gover, Dave Stevenson, Werner Sembach, dri-devel,
	Phil Elwell

In order to support the YUV output, we'll need the atomic state to know
what is the state of the associated property in the CSC setup callback.

Let's change the prototype of that callback to allow us to access it.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 7 ++++++-
 drivers/gpu/drm/vc4/vc4_hdmi.h | 1 +
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 7fdb49e790f3..d79a70bae7f2 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -735,6 +735,7 @@ static void vc4_hdmi_encoder_disable(struct drm_encoder *encoder)
 }
 
 static void vc4_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi,
+			       struct drm_connector_state *state,
 			       const struct drm_display_mode *mode)
 {
 	unsigned long flags;
@@ -822,6 +823,7 @@ static void vc5_hdmi_set_csc_coeffs(struct vc4_hdmi *vc4_hdmi,
 }
 
 static void vc5_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi,
+			       struct drm_connector_state *state,
 			       const struct drm_display_mode *mode)
 {
 	unsigned long flags;
@@ -1144,13 +1146,16 @@ static void vc4_hdmi_encoder_pre_crtc_enable(struct drm_encoder *encoder,
 					     struct drm_atomic_state *state)
 {
 	struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
+	struct drm_connector *connector = &vc4_hdmi->connector;
 	struct drm_display_mode *mode = &vc4_hdmi->saved_adjusted_mode;
+	struct drm_connector_state *conn_state =
+		drm_atomic_get_new_connector_state(state, connector);
 	unsigned long flags;
 
 	mutex_lock(&vc4_hdmi->mutex);
 
 	if (vc4_hdmi->variant->csc_setup)
-		vc4_hdmi->variant->csc_setup(vc4_hdmi, mode);
+		vc4_hdmi->variant->csc_setup(vc4_hdmi, conn_state, mode);
 
 	spin_lock_irqsave(&vc4_hdmi->hw_lock, flags);
 	HDMI_WRITE(HDMI_FIFO_CTL, VC4_HDMI_FIFO_CTL_MASTER_SLAVE_N);
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 4a5536975bf6..2b6aaafc020a 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -77,6 +77,7 @@ struct vc4_hdmi_variant {
 
 	/* Callback to enable / disable the CSC */
 	void (*csc_setup)(struct vc4_hdmi *vc4_hdmi,
+			  struct drm_connector_state *state,
 			  const struct drm_display_mode *mode);
 
 	/* Callback to configure the video timings in the HDMI block */
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [PATCH v3 11/16] drm/vc4: hdmi: Move clock validation to its own function
  2022-01-13 14:07 [PATCH v3 00/16] drm/vc4: hdmi: Yet Another Approach to HDMI YUV output Maxime Ripard
                   ` (9 preceding siblings ...)
  2022-01-13 14:07 ` [PATCH v3 10/16] drm/vc4: hdmi: Change CSC callback prototype Maxime Ripard
@ 2022-01-13 14:07 ` Maxime Ripard
  2022-01-13 14:07 ` [PATCH v3 12/16] drm/vc4: hdmi: Move clock calculation into " Maxime Ripard
                   ` (4 subsequent siblings)
  15 siblings, 0 replies; 19+ messages in thread
From: Maxime Ripard @ 2022-01-13 14:07 UTC (permalink / raw)
  To: Daniel Vetter, David Airlie, Maarten Lankhorst,
	Thomas Zimmermann, Maxime Ripard
  Cc: Dom Cobley, Tim Gover, Dave Stevenson, Werner Sembach, dri-devel,
	Phil Elwell

Our code is doing the same clock rate validation in multiple instances.
Let's create a helper to share the rate validation.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 26 +++++++++++++++-----------
 1 file changed, 15 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index d79a70bae7f2..1b75e8cfd5d5 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1262,6 +1262,19 @@ static void vc4_hdmi_encoder_atomic_mode_set(struct drm_encoder *encoder,
 	mutex_unlock(&vc4_hdmi->mutex);
 }
 
+static enum drm_mode_status
+vc4_hdmi_encoder_clock_valid(const struct vc4_hdmi *vc4_hdmi,
+			     unsigned long long clock)
+{
+	if (clock > vc4_hdmi->variant->max_pixel_clock)
+		return MODE_CLOCK_HIGH;
+
+	if (vc4_hdmi->disable_4kp60 && clock > HDMI_14_MAX_TMDS_CLK)
+		return MODE_CLOCK_HIGH;
+
+	return MODE_OK;
+}
+
 #define WIFI_2_4GHz_CH1_MIN_FREQ	2400000000ULL
 #define WIFI_2_4GHz_CH1_MAX_FREQ	2422000000ULL
 
@@ -1305,10 +1318,7 @@ static int vc4_hdmi_encoder_atomic_check(struct drm_encoder *encoder,
 	if (mode->flags & DRM_MODE_FLAG_DBLCLK)
 		pixel_rate = pixel_rate * 2;
 
-	if (pixel_rate > vc4_hdmi->variant->max_pixel_clock)
-		return -EINVAL;
-
-	if (vc4_hdmi->disable_4kp60 && (pixel_rate > HDMI_14_MAX_TMDS_CLK))
+	if (vc4_hdmi_encoder_clock_valid(vc4_hdmi, pixel_rate) != MODE_OK)
 		return -EINVAL;
 
 	vc4_state->pixel_rate = pixel_rate;
@@ -1327,13 +1337,7 @@ vc4_hdmi_encoder_mode_valid(struct drm_encoder *encoder,
 	     (mode->hsync_end % 2) || (mode->htotal % 2)))
 		return MODE_H_ILLEGAL;
 
-	if ((mode->clock * 1000) > vc4_hdmi->variant->max_pixel_clock)
-		return MODE_CLOCK_HIGH;
-
-	if (vc4_hdmi->disable_4kp60 && vc4_hdmi_mode_needs_scrambling(mode))
-		return MODE_CLOCK_HIGH;
-
-	return MODE_OK;
+	return vc4_hdmi_encoder_clock_valid(vc4_hdmi, mode->clock * 1000);
 }
 
 static const struct drm_encoder_helper_funcs vc4_hdmi_encoder_helper_funcs = {
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [PATCH v3 12/16] drm/vc4: hdmi: Move clock calculation into its own function
  2022-01-13 14:07 [PATCH v3 00/16] drm/vc4: hdmi: Yet Another Approach to HDMI YUV output Maxime Ripard
                   ` (10 preceding siblings ...)
  2022-01-13 14:07 ` [PATCH v3 11/16] drm/vc4: hdmi: Move clock validation to its own function Maxime Ripard
@ 2022-01-13 14:07 ` Maxime Ripard
  2022-01-13 14:07 ` [PATCH v3 13/16] drm/vc4: hdmi: Take the sink maximum TMDS clock into account Maxime Ripard
                   ` (3 subsequent siblings)
  15 siblings, 0 replies; 19+ messages in thread
From: Maxime Ripard @ 2022-01-13 14:07 UTC (permalink / raw)
  To: Daniel Vetter, David Airlie, Maarten Lankhorst,
	Thomas Zimmermann, Maxime Ripard
  Cc: Dom Cobley, Tim Gover, Dave Stevenson, Werner Sembach, dri-devel,
	Phil Elwell

The code to compute our clock rate for a given setup will be called in
multiple places in the next patches, so let's create a separate function
for it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 49 +++++++++++++++++++++++-----------
 1 file changed, 34 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 1b75e8cfd5d5..764f3c5cfa54 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1275,6 +1275,35 @@ vc4_hdmi_encoder_clock_valid(const struct vc4_hdmi *vc4_hdmi,
 	return MODE_OK;
 }
 
+static unsigned long long
+vc4_hdmi_encoder_compute_mode_clock(const struct drm_display_mode *mode,
+				    unsigned int bpc)
+{
+	unsigned long long clock = mode->crtc_clock * 1000;
+
+	if (mode->flags & DRM_MODE_FLAG_DBLCLK)
+		clock = clock * 2;
+
+	return clock * bpc / 8;
+}
+
+static int
+vc4_hdmi_encoder_compute_clock(const struct vc4_hdmi *vc4_hdmi,
+			       struct vc4_hdmi_connector_state *vc4_state,
+			       const struct drm_display_mode *mode,
+			       unsigned int bpc)
+{
+	unsigned long long clock;
+
+	clock = vc4_hdmi_encoder_compute_mode_clock(mode, bpc);
+	if (vc4_hdmi_encoder_clock_valid(vc4_hdmi, clock) != MODE_OK)
+		return -EINVAL;
+
+	vc4_state->pixel_rate = clock;
+
+	return 0;
+}
+
 #define WIFI_2_4GHz_CH1_MIN_FREQ	2400000000ULL
 #define WIFI_2_4GHz_CH1_MAX_FREQ	2422000000ULL
 
@@ -1287,6 +1316,7 @@ static int vc4_hdmi_encoder_atomic_check(struct drm_encoder *encoder,
 	struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
 	unsigned long long pixel_rate = mode->clock * 1000;
 	unsigned long long tmds_rate;
+	int ret;
 
 	if (vc4_hdmi->variant->unsupported_odd_h_timings &&
 	    ((mode->hdisplay % 2) || (mode->hsync_start % 2) ||
@@ -1307,21 +1337,10 @@ static int vc4_hdmi_encoder_atomic_check(struct drm_encoder *encoder,
 		pixel_rate = mode->clock * 1000;
 	}
 
-	if (conn_state->max_bpc == 12) {
-		pixel_rate = pixel_rate * 150;
-		do_div(pixel_rate, 100);
-	} else if (conn_state->max_bpc == 10) {
-		pixel_rate = pixel_rate * 125;
-		do_div(pixel_rate, 100);
-	}
-
-	if (mode->flags & DRM_MODE_FLAG_DBLCLK)
-		pixel_rate = pixel_rate * 2;
-
-	if (vc4_hdmi_encoder_clock_valid(vc4_hdmi, pixel_rate) != MODE_OK)
-		return -EINVAL;
-
-	vc4_state->pixel_rate = pixel_rate;
+	ret = vc4_hdmi_encoder_compute_clock(vc4_hdmi, vc4_state, mode,
+					     conn_state->max_bpc);
+	if (ret)
+		return ret;
 
 	return 0;
 }
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [PATCH v3 13/16] drm/vc4: hdmi: Take the sink maximum TMDS clock into account
  2022-01-13 14:07 [PATCH v3 00/16] drm/vc4: hdmi: Yet Another Approach to HDMI YUV output Maxime Ripard
                   ` (11 preceding siblings ...)
  2022-01-13 14:07 ` [PATCH v3 12/16] drm/vc4: hdmi: Move clock calculation into " Maxime Ripard
@ 2022-01-13 14:07 ` Maxime Ripard
  2022-01-13 14:07 ` [PATCH v3 14/16] drm/vc4: hdmi: Take bpp into account for the scrambler Maxime Ripard
                   ` (2 subsequent siblings)
  15 siblings, 0 replies; 19+ messages in thread
From: Maxime Ripard @ 2022-01-13 14:07 UTC (permalink / raw)
  To: Daniel Vetter, David Airlie, Maarten Lankhorst,
	Thomas Zimmermann, Maxime Ripard
  Cc: Dom Cobley, Tim Gover, Dave Stevenson, Werner Sembach, dri-devel,
	Phil Elwell

In the function that validates that the clock isn't too high, we've only
taken our controller limitations into account so far.

However, the sink can have a limit on the maximum TMDS clock it can deal
with too which is exposed through the EDID and the drm_display_info.

Make sure we check it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 764f3c5cfa54..b68d3626d1a3 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1266,12 +1266,18 @@ static enum drm_mode_status
 vc4_hdmi_encoder_clock_valid(const struct vc4_hdmi *vc4_hdmi,
 			     unsigned long long clock)
 {
+	const struct drm_connector *connector = &vc4_hdmi->connector;
+	const struct drm_display_info *info = &connector->display_info;
+
 	if (clock > vc4_hdmi->variant->max_pixel_clock)
 		return MODE_CLOCK_HIGH;
 
 	if (vc4_hdmi->disable_4kp60 && clock > HDMI_14_MAX_TMDS_CLK)
 		return MODE_CLOCK_HIGH;
 
+	if (info->max_tmds_clock && clock > (info->max_tmds_clock * 1000))
+		return MODE_CLOCK_HIGH;
+
 	return MODE_OK;
 }
 
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [PATCH v3 14/16] drm/vc4: hdmi: Take bpp into account for the scrambler
  2022-01-13 14:07 [PATCH v3 00/16] drm/vc4: hdmi: Yet Another Approach to HDMI YUV output Maxime Ripard
                   ` (12 preceding siblings ...)
  2022-01-13 14:07 ` [PATCH v3 13/16] drm/vc4: hdmi: Take the sink maximum TMDS clock into account Maxime Ripard
@ 2022-01-13 14:07 ` Maxime Ripard
  2022-01-13 14:07 ` [PATCH v3 15/16] drm/vc4: hdmi: Always try to have the highest bpc Maxime Ripard
  2022-01-13 14:07 ` [PATCH v3 16/16] drm/vc4: hdmi: Support HDMI YUV output Maxime Ripard
  15 siblings, 0 replies; 19+ messages in thread
From: Maxime Ripard @ 2022-01-13 14:07 UTC (permalink / raw)
  To: Daniel Vetter, David Airlie, Maarten Lankhorst,
	Thomas Zimmermann, Maxime Ripard
  Cc: Dom Cobley, Tim Gover, Dave Stevenson, Werner Sembach, dri-devel,
	Phil Elwell

The current code only base its decision for whether the scrambler must be
enabled or not on the pixel clock of the mode, but doesn't take the bits
per color into account.

Let's leverage the new function to compute the clock rate in the
scrambler setup code.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 17 +++++++++++++----
 drivers/gpu/drm/vc4/vc4_hdmi.h |  5 +++++
 2 files changed, 18 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index b68d3626d1a3..86801019ceb1 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -99,9 +99,17 @@
 
 #define HDMI_14_MAX_TMDS_CLK   (340 * 1000 * 1000)
 
-static bool vc4_hdmi_mode_needs_scrambling(const struct drm_display_mode *mode)
+
+static unsigned long long
+vc4_hdmi_encoder_compute_mode_clock(const struct drm_display_mode *mode,
+				    unsigned int bpc);
+
+static bool vc4_hdmi_mode_needs_scrambling(const struct drm_display_mode *mode,
+					   unsigned int bpc)
 {
-	return (mode->clock * 1000) > HDMI_14_MAX_TMDS_CLK;
+	unsigned long long clock = vc4_hdmi_encoder_compute_mode_clock(mode, bpc);
+
+	return clock > HDMI_14_MAX_TMDS_CLK;
 }
 
 static bool vc4_hdmi_is_full_range_rgb(struct vc4_hdmi *vc4_hdmi,
@@ -272,7 +280,7 @@ static int vc4_hdmi_connector_get_modes(struct drm_connector *connector)
 		struct drm_display_mode *mode;
 
 		list_for_each_entry(mode, &connector->probed_modes, head) {
-			if (vc4_hdmi_mode_needs_scrambling(mode)) {
+			if (vc4_hdmi_mode_needs_scrambling(mode, 8)) {
 				drm_warn_once(drm, "The core clock cannot reach frequencies high enough to support 4k @ 60Hz.");
 				drm_warn_once(drm, "Please change your config.txt file to add hdmi_enable_4kp60.");
 			}
@@ -613,7 +621,7 @@ static void vc4_hdmi_enable_scrambling(struct drm_encoder *encoder)
 	if (!vc4_hdmi_supports_scrambling(encoder, mode))
 		return;
 
-	if (!vc4_hdmi_mode_needs_scrambling(mode))
+	if (!vc4_hdmi_mode_needs_scrambling(mode, vc4_hdmi->output_bpc))
 		return;
 
 	drm_scdc_set_high_tmds_clock_ratio(vc4_hdmi->ddc, true);
@@ -1256,6 +1264,7 @@ static void vc4_hdmi_encoder_atomic_mode_set(struct drm_encoder *encoder,
 	struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
 
 	mutex_lock(&vc4_hdmi->mutex);
+	vc4_hdmi->output_bpc = conn_state->max_bpc;
 	memcpy(&vc4_hdmi->saved_adjusted_mode,
 	       &crtc_state->adjusted_mode,
 	       sizeof(vc4_hdmi->saved_adjusted_mode));
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 2b6aaafc020a..31b7d27deb8e 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -216,6 +216,11 @@ struct vc4_hdmi {
 	 * the scrambler on? Protected by @mutex.
 	 */
 	bool scdc_enabled;
+
+	/**
+	 * @output_bpc: BPC currently being used. Protected by @mutex.
+	 */
+	unsigned int output_bpc;
 };
 
 static inline struct vc4_hdmi *
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [PATCH v3 15/16] drm/vc4: hdmi: Always try to have the highest bpc
  2022-01-13 14:07 [PATCH v3 00/16] drm/vc4: hdmi: Yet Another Approach to HDMI YUV output Maxime Ripard
                   ` (13 preceding siblings ...)
  2022-01-13 14:07 ` [PATCH v3 14/16] drm/vc4: hdmi: Take bpp into account for the scrambler Maxime Ripard
@ 2022-01-13 14:07 ` Maxime Ripard
  2022-01-13 14:07 ` [PATCH v3 16/16] drm/vc4: hdmi: Support HDMI YUV output Maxime Ripard
  15 siblings, 0 replies; 19+ messages in thread
From: Maxime Ripard @ 2022-01-13 14:07 UTC (permalink / raw)
  To: Daniel Vetter, David Airlie, Maarten Lankhorst,
	Thomas Zimmermann, Maxime Ripard
  Cc: Dom Cobley, Tim Gover, Dave Stevenson, Werner Sembach, dri-devel,
	Phil Elwell

Currently we take the max_bpc property as the bpc value and do not try
anything else.

However, what the other drivers seem to be doing is that they would try
with the highest bpc allowed by the max_bpc property and the hardware
capabilities, test if it results in an acceptable configuration, and if
not decrease the bpc and try again.

Let's use the same logic.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 44 ++++++++++++++++++++++++++++++----
 drivers/gpu/drm/vc4/vc4_hdmi.h |  4 +++-
 2 files changed, 43 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 86801019ceb1..b7783fba1b51 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -352,6 +352,7 @@ vc4_hdmi_connector_duplicate_state(struct drm_connector *connector)
 		return NULL;
 
 	new_state->pixel_rate = vc4_state->pixel_rate;
+	new_state->output_bpc = vc4_state->output_bpc;
 	__drm_atomic_helper_connector_duplicate_state(connector, &new_state->base);
 
 	return &new_state->base;
@@ -907,6 +908,8 @@ static void vc5_hdmi_set_timings(struct vc4_hdmi *vc4_hdmi,
 				 struct drm_connector_state *state,
 				 struct drm_display_mode *mode)
 {
+	const struct vc4_hdmi_connector_state *vc4_state =
+		conn_state_to_vc4_hdmi_conn_state(state);
 	bool hsync_pos = mode->flags & DRM_MODE_FLAG_PHSYNC;
 	bool vsync_pos = mode->flags & DRM_MODE_FLAG_PVSYNC;
 	bool interlaced = mode->flags & DRM_MODE_FLAG_INTERLACE;
@@ -954,7 +957,7 @@ static void vc5_hdmi_set_timings(struct vc4_hdmi *vc4_hdmi,
 	HDMI_WRITE(HDMI_VERTB0, vertb_even);
 	HDMI_WRITE(HDMI_VERTB1, vertb);
 
-	switch (state->max_bpc) {
+	switch (vc4_state->output_bpc) {
 	case 12:
 		gcp = 6;
 		gcp_en = true;
@@ -1262,9 +1265,11 @@ static void vc4_hdmi_encoder_atomic_mode_set(struct drm_encoder *encoder,
 					     struct drm_connector_state *conn_state)
 {
 	struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
+	struct vc4_hdmi_connector_state *vc4_state =
+		conn_state_to_vc4_hdmi_conn_state(conn_state);
 
 	mutex_lock(&vc4_hdmi->mutex);
-	vc4_hdmi->output_bpc = conn_state->max_bpc;
+	vc4_hdmi->output_bpc = vc4_state->output_bpc;
 	memcpy(&vc4_hdmi->saved_adjusted_mode,
 	       &crtc_state->adjusted_mode,
 	       sizeof(vc4_hdmi->saved_adjusted_mode));
@@ -1319,6 +1324,38 @@ vc4_hdmi_encoder_compute_clock(const struct vc4_hdmi *vc4_hdmi,
 	return 0;
 }
 
+static int
+vc4_hdmi_encoder_compute_config(const struct vc4_hdmi *vc4_hdmi,
+				struct vc4_hdmi_connector_state *vc4_state,
+				const struct drm_display_mode *mode)
+{
+	struct drm_connector_state *conn_state = &vc4_state->base;
+	unsigned int max_bpc = clamp_t(unsigned int, conn_state->max_bpc, 8, 12);
+	unsigned int bpc;
+	int ret;
+
+	for (bpc = max_bpc; bpc >= 8; bpc -= 2) {
+		drm_dbg(dev, "Trying with a %d bpc output\n", bpc);
+
+		ret = vc4_hdmi_encoder_compute_clock(vc4_hdmi, vc4_state,
+						     mode, bpc);
+		if (ret)
+			continue;
+
+		vc4_state->output_bpc = bpc;
+
+		drm_dbg(dev,
+			"Mode %ux%u @ %uHz: Found configuration: bpc: %u, clock: %llu\n",
+			mode->hdisplay, mode->vdisplay, drm_mode_vrefresh(mode),
+			vc4_state->output_bpc,
+			vc4_state->pixel_rate);
+
+		break;
+	}
+
+	return ret;
+}
+
 #define WIFI_2_4GHz_CH1_MIN_FREQ	2400000000ULL
 #define WIFI_2_4GHz_CH1_MAX_FREQ	2422000000ULL
 
@@ -1352,8 +1389,7 @@ static int vc4_hdmi_encoder_atomic_check(struct drm_encoder *encoder,
 		pixel_rate = mode->clock * 1000;
 	}
 
-	ret = vc4_hdmi_encoder_compute_clock(vc4_hdmi, vc4_state, mode,
-					     conn_state->max_bpc);
+	ret = vc4_hdmi_encoder_compute_config(vc4_hdmi, vc4_state, mode);
 	if (ret)
 		return ret;
 
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 31b7d27deb8e..05d2b0eeaa9b 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -218,7 +218,8 @@ struct vc4_hdmi {
 	bool scdc_enabled;
 
 	/**
-	 * @output_bpc: BPC currently being used. Protected by @mutex.
+	 * @output_bpc: Copy of @vc4_connector_state.output_bpc for use
+	 * outside of KMS hooks. Protected by @mutex.
 	 */
 	unsigned int output_bpc;
 };
@@ -240,6 +241,7 @@ encoder_to_vc4_hdmi(struct drm_encoder *encoder)
 struct vc4_hdmi_connector_state {
 	struct drm_connector_state	base;
 	unsigned long long		pixel_rate;
+	unsigned int 			output_bpc;
 };
 
 static inline struct vc4_hdmi_connector_state *
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [PATCH v3 16/16] drm/vc4: hdmi: Support HDMI YUV output
  2022-01-13 14:07 [PATCH v3 00/16] drm/vc4: hdmi: Yet Another Approach to HDMI YUV output Maxime Ripard
                   ` (14 preceding siblings ...)
  2022-01-13 14:07 ` [PATCH v3 15/16] drm/vc4: hdmi: Always try to have the highest bpc Maxime Ripard
@ 2022-01-13 14:07 ` Maxime Ripard
  15 siblings, 0 replies; 19+ messages in thread
From: Maxime Ripard @ 2022-01-13 14:07 UTC (permalink / raw)
  To: Daniel Vetter, David Airlie, Maarten Lankhorst,
	Thomas Zimmermann, Maxime Ripard
  Cc: Dom Cobley, Tim Gover, Dave Stevenson, Werner Sembach, dri-devel,
	Phil Elwell

In addition to the RGB444 output, the BCM2711 HDMI controller supports
the YUV444 and YUV422 output formats.

Let's add support for them in the driver, but still use RGB as the
preferred format.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c      | 289 ++++++++++++++++++++++++++--
 drivers/gpu/drm/vc4/vc4_hdmi.h      |  14 ++
 drivers/gpu/drm/vc4/vc4_hdmi_regs.h |   6 +
 drivers/gpu/drm/vc4/vc4_regs.h      |  16 ++
 4 files changed, 309 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index b7783fba1b51..bda6c578b30b 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -99,15 +99,30 @@
 
 #define HDMI_14_MAX_TMDS_CLK   (340 * 1000 * 1000)
 
+static const char * const output_format_str[] = {
+	[VC4_HDMI_OUTPUT_RGB]		= "RGB",
+	[VC4_HDMI_OUTPUT_YUV420]	= "YUV 4:2:0",
+	[VC4_HDMI_OUTPUT_YUV422]	= "YUV 4:2:2",
+	[VC4_HDMI_OUTPUT_YUV444]	= "YUV 4:4:4",
+};
+
+static const char *vc4_hdmi_output_fmt_str(enum vc4_hdmi_output_format fmt)
+{
+	if (fmt >= ARRAY_SIZE(output_format_str))
+		return "invalid";
+
+	return output_format_str[fmt];
+}
 
 static unsigned long long
 vc4_hdmi_encoder_compute_mode_clock(const struct drm_display_mode *mode,
-				    unsigned int bpc);
+				    unsigned int bpc, enum vc4_hdmi_output_format fmt);
 
 static bool vc4_hdmi_mode_needs_scrambling(const struct drm_display_mode *mode,
-					   unsigned int bpc)
+					   unsigned int bpc,
+					   enum vc4_hdmi_output_format fmt)
 {
-	unsigned long long clock = vc4_hdmi_encoder_compute_mode_clock(mode, bpc);
+	unsigned long long clock = vc4_hdmi_encoder_compute_mode_clock(mode, bpc, fmt);
 
 	return clock > HDMI_14_MAX_TMDS_CLK;
 }
@@ -280,7 +295,7 @@ static int vc4_hdmi_connector_get_modes(struct drm_connector *connector)
 		struct drm_display_mode *mode;
 
 		list_for_each_entry(mode, &connector->probed_modes, head) {
-			if (vc4_hdmi_mode_needs_scrambling(mode, 8)) {
+			if (vc4_hdmi_mode_needs_scrambling(mode, 8, VC4_HDMI_OUTPUT_RGB)) {
 				drm_warn_once(drm, "The core clock cannot reach frequencies high enough to support 4k @ 60Hz.");
 				drm_warn_once(drm, "Please change your config.txt file to add hdmi_enable_4kp60.");
 			}
@@ -337,6 +352,7 @@ static void vc4_hdmi_connector_reset(struct drm_connector *connector)
 
 	new_state->base.max_bpc = 8;
 	new_state->base.max_requested_bpc = 8;
+	new_state->output_format = VC4_HDMI_OUTPUT_RGB;
 	drm_atomic_helper_connector_tv_reset(connector);
 }
 
@@ -353,6 +369,7 @@ vc4_hdmi_connector_duplicate_state(struct drm_connector *connector)
 
 	new_state->pixel_rate = vc4_state->pixel_rate;
 	new_state->output_bpc = vc4_state->output_bpc;
+	new_state->output_format = vc4_state->output_format;
 	__drm_atomic_helper_connector_duplicate_state(connector, &new_state->base);
 
 	return &new_state->base;
@@ -496,11 +513,38 @@ static void vc4_hdmi_write_infoframe(struct drm_encoder *encoder,
 		DRM_ERROR("Failed to wait for infoframe to start: %d\n", ret);
 }
 
+static void vc4_hdmi_avi_infoframe_colorspace(struct hdmi_avi_infoframe *frame,
+					      enum vc4_hdmi_output_format fmt)
+{
+	switch (fmt) {
+	case VC4_HDMI_OUTPUT_RGB:
+		frame->colorspace = HDMI_COLORSPACE_RGB;
+		break;
+
+	case VC4_HDMI_OUTPUT_YUV420:
+		frame->colorspace = HDMI_COLORSPACE_YUV420;
+		break;
+
+	case VC4_HDMI_OUTPUT_YUV422:
+		frame->colorspace = HDMI_COLORSPACE_YUV422;
+		break;
+
+	case VC4_HDMI_OUTPUT_YUV444:
+		frame->colorspace = HDMI_COLORSPACE_YUV444;
+		break;
+
+	default:
+		break;
+	}
+}
+
 static void vc4_hdmi_set_avi_infoframe(struct drm_encoder *encoder)
 {
 	struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
 	struct drm_connector *connector = &vc4_hdmi->connector;
 	struct drm_connector_state *cstate = connector->state;
+	struct vc4_hdmi_connector_state *vc4_state =
+		conn_state_to_vc4_hdmi_conn_state(cstate);
 	const struct drm_display_mode *mode = &vc4_hdmi->saved_adjusted_mode;
 	union hdmi_infoframe frame;
 	int ret;
@@ -520,6 +564,7 @@ static void vc4_hdmi_set_avi_infoframe(struct drm_encoder *encoder)
 					   HDMI_QUANTIZATION_RANGE_FULL :
 					   HDMI_QUANTIZATION_RANGE_LIMITED);
 	drm_hdmi_avi_infoframe_colorimetry(&frame.avi, cstate);
+	vc4_hdmi_avi_infoframe_colorspace(&frame.avi, vc4_state->output_format);
 	drm_hdmi_avi_infoframe_bars(&frame.avi, cstate);
 
 	vc4_hdmi_write_infoframe(encoder, &frame);
@@ -622,7 +667,9 @@ static void vc4_hdmi_enable_scrambling(struct drm_encoder *encoder)
 	if (!vc4_hdmi_supports_scrambling(encoder, mode))
 		return;
 
-	if (!vc4_hdmi_mode_needs_scrambling(mode, vc4_hdmi->output_bpc))
+	if (!vc4_hdmi_mode_needs_scrambling(mode,
+					    vc4_hdmi->output_bpc,
+					    vc4_hdmi->output_format))
 		return;
 
 	drm_scdc_set_high_tmds_clock_ratio(vc4_hdmi->ddc, true);
@@ -818,6 +865,38 @@ static const u16 vc5_hdmi_csc_full_rgb_to_limited_rgb[3][4] = {
 	{ 0x0000, 0x0000, 0x1b80, 0x0400 },
 };
 
+/*
+ * Conversion between Full Range RGB and Full Range YUV422 using the
+ * BT.709 Colorspace
+ *
+ * [  0.212639  0.715169  0.072192  0   ]
+ * [ -0.117208 -0.394207  0.511416  128 ]
+ * [  0.511416 -0.464524 -0.046891  128 ]
+ *
+ * Matrix is signed 2p13 fixed point, with signed 9p6 offsets
+ */
+static const u16 vc5_hdmi_csc_full_rgb_to_full_yuv422_bt709[3][4] = {
+	{ 0x06ce, 0x16e3, 0x024f, 0x0000 },
+	{ 0xfc41, 0xf364, 0x105e, 0x2000 },
+	{ 0x105e, 0xf124, 0xfe81, 0x2000 },
+};
+
+/*
+ * Conversion between Full Range RGB and Full Range YUV444 using the
+ * BT.709 Colorspace
+ *
+ * [ -0.117208 -0.394207  0.511416  128 ]
+ * [  0.511416 -0.464524 -0.046891  128 ]
+ * [  0.212639  0.715169  0.072192  0   ]
+ *
+ * Matrix is signed 2p13 fixed point, with signed 9p6 offsets
+ */
+static const u16 vc5_hdmi_csc_full_rgb_to_full_yuv444_bt709[3][4] = {
+	{ 0xfc41, 0xf364, 0x105e, 0x2000 },
+	{ 0x105e, 0xf124, 0xfe81, 0x2000 },
+	{ 0x06ce, 0x16e3, 0x024f, 0x0000 },
+};
+
 static void vc5_hdmi_set_csc_coeffs(struct vc4_hdmi *vc4_hdmi,
 				    const u16 coeffs[3][4])
 {
@@ -835,19 +914,53 @@ static void vc5_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi,
 			       struct drm_connector_state *state,
 			       const struct drm_display_mode *mode)
 {
+	struct vc4_hdmi_connector_state *vc4_state =
+		conn_state_to_vc4_hdmi_conn_state(state);
 	unsigned long flags;
+	u32 if_cfg = 0;
+	u32 if_xbar = 0x543210;
+	u32 csc_chan_ctl = 0;
 	u32 csc_ctl = VC5_MT_CP_CSC_CTL_ENABLE | VC4_SET_FIELD(VC4_HD_CSC_CTL_MODE_CUSTOM,
 							       VC5_MT_CP_CSC_CTL_MODE);
 
 	spin_lock_irqsave(&vc4_hdmi->hw_lock, flags);
 
-	HDMI_WRITE(HDMI_VEC_INTERFACE_XBAR, 0x354021);
+	switch (vc4_state->output_format) {
+	case VC4_HDMI_OUTPUT_YUV444:
+		vc5_hdmi_set_csc_coeffs(vc4_hdmi, vc5_hdmi_csc_full_rgb_to_full_yuv444_bt709);
+		break;
 
-	if (!vc4_hdmi_is_full_range_rgb(vc4_hdmi, mode))
-		vc5_hdmi_set_csc_coeffs(vc4_hdmi, vc5_hdmi_csc_full_rgb_to_limited_rgb);
-	else
-		vc5_hdmi_set_csc_coeffs(vc4_hdmi, vc5_hdmi_csc_full_rgb_unity);
+	case VC4_HDMI_OUTPUT_YUV422:
+		csc_ctl |= VC4_SET_FIELD(VC5_MT_CP_CSC_CTL_FILTER_MODE_444_TO_422_STANDARD,
+					 VC5_MT_CP_CSC_CTL_FILTER_MODE_444_TO_422) |
+			VC5_MT_CP_CSC_CTL_USE_444_TO_422 |
+			VC5_MT_CP_CSC_CTL_USE_RNG_SUPPRESSION;
 
+		csc_chan_ctl |= VC4_SET_FIELD(VC5_MT_CP_CHANNEL_CTL_OUTPUT_REMAP_LEGACY_STYLE,
+					      VC5_MT_CP_CHANNEL_CTL_OUTPUT_REMAP);
+
+		if_cfg |= VC4_SET_FIELD(VC5_DVP_HT_VEC_INTERFACE_CFG_SEL_422_FORMAT_422_LEGACY,
+					VC5_DVP_HT_VEC_INTERFACE_CFG_SEL_422);
+
+		vc5_hdmi_set_csc_coeffs(vc4_hdmi, vc5_hdmi_csc_full_rgb_to_full_yuv422_bt709);
+		break;
+
+	case VC4_HDMI_OUTPUT_RGB:
+		if_xbar = 0x354021;
+
+		if (!vc4_hdmi_is_full_range_rgb(vc4_hdmi, mode))
+			vc5_hdmi_set_csc_coeffs(vc4_hdmi, vc5_hdmi_csc_full_rgb_to_limited_rgb);
+		else
+			vc5_hdmi_set_csc_coeffs(vc4_hdmi, vc5_hdmi_csc_full_rgb_unity);
+		break;
+
+	default:
+		break;
+	}
+
+	HDMI_WRITE(HDMI_VEC_INTERFACE_CFG, if_cfg);
+	HDMI_WRITE(HDMI_VEC_INTERFACE_XBAR, if_xbar);
+	HDMI_WRITE(HDMI_CSC_CHANNEL_CTL, csc_chan_ctl);
 	HDMI_WRITE(HDMI_CSC_CTL, csc_ctl);
 
 	spin_unlock_irqrestore(&vc4_hdmi->hw_lock, flags);
@@ -973,6 +1086,15 @@ static void vc5_hdmi_set_timings(struct vc4_hdmi *vc4_hdmi,
 		break;
 	}
 
+	/*
+	 * YCC422 is always 36-bit and not considered deep colour so
+	 * doesn't signal in GCP.
+	 */
+	if (vc4_state->output_format == VC4_HDMI_OUTPUT_YUV422) {
+		gcp = 4;
+		gcp_en = false;
+	}
+
 	reg = HDMI_READ(HDMI_DEEP_COLOR_CONFIG_1);
 	reg &= ~(VC5_HDMI_DEEP_COLOR_CONFIG_1_INIT_PACK_PHASE_MASK |
 		 VC5_HDMI_DEEP_COLOR_CONFIG_1_COLOR_DEPTH_MASK);
@@ -1270,12 +1392,97 @@ static void vc4_hdmi_encoder_atomic_mode_set(struct drm_encoder *encoder,
 
 	mutex_lock(&vc4_hdmi->mutex);
 	vc4_hdmi->output_bpc = vc4_state->output_bpc;
+	vc4_hdmi->output_format = vc4_state->output_format;
 	memcpy(&vc4_hdmi->saved_adjusted_mode,
 	       &crtc_state->adjusted_mode,
 	       sizeof(vc4_hdmi->saved_adjusted_mode));
 	mutex_unlock(&vc4_hdmi->mutex);
 }
 
+static bool
+vc4_hdmi_sink_supports_format_bpc(const struct vc4_hdmi *vc4_hdmi,
+				  const struct drm_display_info *info,
+				  const struct drm_display_mode *mode,
+				  unsigned int format, unsigned int bpc)
+{
+	struct drm_device *dev = vc4_hdmi->connector.dev;
+	u8 vic = drm_match_cea_mode(mode);
+
+	if (vic == 1 && bpc != 8) {
+		drm_dbg(dev, "VIC1 requires a bpc of 8, got %u\n", bpc);
+		return false;
+	}
+
+	if (!info->is_hdmi &&
+	    (format != VC4_HDMI_OUTPUT_RGB || bpc != 8)) {
+		drm_dbg(dev, "DVI Monitors require an RGB output at 8 bpc\n");
+		return false;
+	}
+
+	switch (format) {
+	case VC4_HDMI_OUTPUT_RGB:
+		drm_dbg(dev, "RGB Format, checking the constraints.\n");
+
+		if (!(info->color_formats & DRM_COLOR_FORMAT_RGB444))
+			return false;
+
+		if (bpc == 10 && !(info->edid_hdmi_rgb444_dc_modes & DRM_EDID_HDMI_DC_30)) {
+			drm_dbg(dev, "10 BPC but sink doesn't support Deep Color 30.\n");
+			return false;
+		}
+
+		if (bpc == 12 && !(info->edid_hdmi_rgb444_dc_modes & DRM_EDID_HDMI_DC_36)) {
+			drm_dbg(dev, "12 BPC but sink doesn't support Deep Color 36.\n");
+			return false;
+		}
+
+		drm_dbg(dev, "RGB format supported in that configuration.\n");
+
+		return true;
+
+	case VC4_HDMI_OUTPUT_YUV422:
+		drm_dbg(dev, "YUV422 format, checking the constraints.\n");
+
+		if (!(info->color_formats & DRM_COLOR_FORMAT_YCBCR422)) {
+			drm_dbg(dev, "Sink doesn't support YUV422.\n");
+			return false;
+		}
+
+		if (bpc != 12) {
+			drm_dbg(dev, "YUV422 only supports 12 bpc.\n");
+			return false;
+		}
+
+		drm_dbg(dev, "YUV422 format supported in that configuration.\n");
+
+		return true;
+
+	case VC4_HDMI_OUTPUT_YUV444:
+		drm_dbg(dev, "YUV444 format, checking the constraints.\n");
+
+		if (!(info->color_formats & DRM_COLOR_FORMAT_YCBCR444)) {
+			drm_dbg(dev, "Sink doesn't support YUV444.\n");
+			return false;
+		}
+
+		if (bpc == 10 && !(info->edid_hdmi_ycbcr444_dc_modes & DRM_EDID_HDMI_DC_30)) {
+			drm_dbg(dev, "10 BPC but sink doesn't support Deep Color 30.\n");
+			return false;
+		}
+
+		if (bpc == 12 && !(info->edid_hdmi_ycbcr444_dc_modes & DRM_EDID_HDMI_DC_36)) {
+			drm_dbg(dev, "12 BPC but sink doesn't support Deep Color 36.\n");
+			return false;
+		}
+
+		drm_dbg(dev, "YUV444 format supported in that configuration.\n");
+
+		return true;
+	}
+
+	return false;
+}
+
 static enum drm_mode_status
 vc4_hdmi_encoder_clock_valid(const struct vc4_hdmi *vc4_hdmi,
 			     unsigned long long clock)
@@ -1297,13 +1504,17 @@ vc4_hdmi_encoder_clock_valid(const struct vc4_hdmi *vc4_hdmi,
 
 static unsigned long long
 vc4_hdmi_encoder_compute_mode_clock(const struct drm_display_mode *mode,
-				    unsigned int bpc)
+				    unsigned int bpc,
+				    enum vc4_hdmi_output_format fmt)
 {
 	unsigned long long clock = mode->crtc_clock * 1000;
 
 	if (mode->flags & DRM_MODE_FLAG_DBLCLK)
 		clock = clock * 2;
 
+	if (fmt == VC4_HDMI_OUTPUT_YUV422)
+		bpc = 8;
+
 	return clock * bpc / 8;
 }
 
@@ -1311,11 +1522,11 @@ static int
 vc4_hdmi_encoder_compute_clock(const struct vc4_hdmi *vc4_hdmi,
 			       struct vc4_hdmi_connector_state *vc4_state,
 			       const struct drm_display_mode *mode,
-			       unsigned int bpc)
+			       unsigned int bpc, unsigned int fmt)
 {
 	unsigned long long clock;
 
-	clock = vc4_hdmi_encoder_compute_mode_clock(mode, bpc);
+	clock = vc4_hdmi_encoder_compute_mode_clock(mode, bpc, fmt);
 	if (vc4_hdmi_encoder_clock_valid(vc4_hdmi, clock) != MODE_OK)
 		return -EINVAL;
 
@@ -1324,11 +1535,56 @@ vc4_hdmi_encoder_compute_clock(const struct vc4_hdmi *vc4_hdmi,
 	return 0;
 }
 
+static int
+vc4_hdmi_encoder_compute_format(const struct vc4_hdmi *vc4_hdmi,
+				struct vc4_hdmi_connector_state *vc4_state,
+				const struct drm_display_mode *mode,
+				unsigned int bpc)
+{
+	struct drm_device *dev = vc4_hdmi->connector.dev;
+	const struct drm_connector *connector = &vc4_hdmi->connector;
+	const struct drm_display_info *info = &connector->display_info;
+	unsigned int format;
+
+	drm_dbg(dev, "Trying with an RGB output\n");
+
+	format = VC4_HDMI_OUTPUT_RGB;
+	if (vc4_hdmi_sink_supports_format_bpc(vc4_hdmi, info, mode, format, bpc)) {
+		int ret;
+
+		ret = vc4_hdmi_encoder_compute_clock(vc4_hdmi, vc4_state,
+						     mode, bpc, format);
+		if (!ret) {
+			vc4_state->output_format = format;
+			return 0;
+		}
+	}
+
+	drm_dbg(dev, "Failed, Trying with an YUV422 output\n");
+
+	format = VC4_HDMI_OUTPUT_YUV422;
+	if (vc4_hdmi_sink_supports_format_bpc(vc4_hdmi, info, mode, format, bpc)) {
+		int ret;
+
+		ret = vc4_hdmi_encoder_compute_clock(vc4_hdmi, vc4_state,
+						     mode, bpc, format);
+		if (!ret) {
+			vc4_state->output_format = format;
+			return 0;
+		}
+	}
+
+	drm_dbg(dev, "Failed. No Format Supported for that bpc count.\n");
+
+	return -EINVAL;
+}
+
 static int
 vc4_hdmi_encoder_compute_config(const struct vc4_hdmi *vc4_hdmi,
 				struct vc4_hdmi_connector_state *vc4_state,
 				const struct drm_display_mode *mode)
 {
+	struct drm_device *dev = vc4_hdmi->connector.dev;
 	struct drm_connector_state *conn_state = &vc4_state->base;
 	unsigned int max_bpc = clamp_t(unsigned int, conn_state->max_bpc, 8, 12);
 	unsigned int bpc;
@@ -1337,17 +1593,18 @@ vc4_hdmi_encoder_compute_config(const struct vc4_hdmi *vc4_hdmi,
 	for (bpc = max_bpc; bpc >= 8; bpc -= 2) {
 		drm_dbg(dev, "Trying with a %d bpc output\n", bpc);
 
-		ret = vc4_hdmi_encoder_compute_clock(vc4_hdmi, vc4_state,
-						     mode, bpc);
+		ret = vc4_hdmi_encoder_compute_format(vc4_hdmi, vc4_state,
+						      mode, bpc);
 		if (ret)
 			continue;
 
 		vc4_state->output_bpc = bpc;
 
 		drm_dbg(dev,
-			"Mode %ux%u @ %uHz: Found configuration: bpc: %u, clock: %llu\n",
+			"Mode %ux%u @ %uHz: Found configuration: bpc: %u, fmt: %s, clock: %llu\n",
 			mode->hdisplay, mode->vdisplay, drm_mode_vrefresh(mode),
 			vc4_state->output_bpc,
+			vc4_hdmi_output_fmt_str(vc4_state->output_format),
 			vc4_state->pixel_rate);
 
 		break;
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 05d2b0eeaa9b..f015ae80c5d4 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -117,6 +117,13 @@ struct vc4_hdmi_audio {
 	bool streaming;
 };
 
+enum vc4_hdmi_output_format {
+	VC4_HDMI_OUTPUT_RGB,
+	VC4_HDMI_OUTPUT_YUV422,
+	VC4_HDMI_OUTPUT_YUV444,
+	VC4_HDMI_OUTPUT_YUV420,
+};
+
 /* General HDMI hardware state. */
 struct vc4_hdmi {
 	struct vc4_hdmi_audio audio;
@@ -222,6 +229,12 @@ struct vc4_hdmi {
 	 * outside of KMS hooks. Protected by @mutex.
 	 */
 	unsigned int output_bpc;
+
+	/**
+	 * @output_format: Copy of @vc4_connector_state.output_format
+	 * for use outside of KMS hooks. Protected by @mutex.
+	 */
+	enum vc4_hdmi_output_format output_format;
 };
 
 static inline struct vc4_hdmi *
@@ -242,6 +255,7 @@ struct vc4_hdmi_connector_state {
 	struct drm_connector_state	base;
 	unsigned long long		pixel_rate;
 	unsigned int 			output_bpc;
+	enum vc4_hdmi_output_format	output_format;
 };
 
 static inline struct vc4_hdmi_connector_state *
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi_regs.h b/drivers/gpu/drm/vc4/vc4_hdmi_regs.h
index fc971506bd4f..a040356b6bdc 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi_regs.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi_regs.h
@@ -54,6 +54,7 @@ enum vc4_hdmi_field {
 	HDMI_CSC_24_23,
 	HDMI_CSC_32_31,
 	HDMI_CSC_34_33,
+	HDMI_CSC_CHANNEL_CTL,
 	HDMI_CSC_CTL,
 
 	/*
@@ -119,6 +120,7 @@ enum vc4_hdmi_field {
 	HDMI_TX_PHY_POWERDOWN_CTL,
 	HDMI_TX_PHY_RESET_CTL,
 	HDMI_TX_PHY_TMDS_CLK_WORD_SEL,
+	HDMI_VEC_INTERFACE_CFG,
 	HDMI_VEC_INTERFACE_XBAR,
 	HDMI_VERTA0,
 	HDMI_VERTA1,
@@ -244,6 +246,7 @@ static const struct vc4_hdmi_register __maybe_unused vc5_hdmi_hdmi0_fields[] = {
 	VC4_HDMI_REG(HDMI_SCRAMBLER_CTL, 0x1c4),
 
 	VC5_DVP_REG(HDMI_CLOCK_STOP, 0x0bc),
+	VC5_DVP_REG(HDMI_VEC_INTERFACE_CFG, 0x0ec),
 	VC5_DVP_REG(HDMI_VEC_INTERFACE_XBAR, 0x0f0),
 
 	VC5_PHY_REG(HDMI_TX_PHY_RESET_CTL, 0x000),
@@ -289,6 +292,7 @@ static const struct vc4_hdmi_register __maybe_unused vc5_hdmi_hdmi0_fields[] = {
 	VC5_CSC_REG(HDMI_CSC_24_23, 0x010),
 	VC5_CSC_REG(HDMI_CSC_32_31, 0x014),
 	VC5_CSC_REG(HDMI_CSC_34_33, 0x018),
+	VC5_CSC_REG(HDMI_CSC_CHANNEL_CTL, 0x02c),
 };
 
 static const struct vc4_hdmi_register __maybe_unused vc5_hdmi_hdmi1_fields[] = {
@@ -324,6 +328,7 @@ static const struct vc4_hdmi_register __maybe_unused vc5_hdmi_hdmi1_fields[] = {
 	VC4_HDMI_REG(HDMI_SCRAMBLER_CTL, 0x1c4),
 
 	VC5_DVP_REG(HDMI_CLOCK_STOP, 0x0bc),
+	VC5_DVP_REG(HDMI_VEC_INTERFACE_CFG, 0x0ec),
 	VC5_DVP_REG(HDMI_VEC_INTERFACE_XBAR, 0x0f0),
 
 	VC5_PHY_REG(HDMI_TX_PHY_RESET_CTL, 0x000),
@@ -369,6 +374,7 @@ static const struct vc4_hdmi_register __maybe_unused vc5_hdmi_hdmi1_fields[] = {
 	VC5_CSC_REG(HDMI_CSC_24_23, 0x010),
 	VC5_CSC_REG(HDMI_CSC_32_31, 0x014),
 	VC5_CSC_REG(HDMI_CSC_34_33, 0x018),
+	VC5_CSC_REG(HDMI_CSC_CHANNEL_CTL, 0x02c),
 };
 
 static inline
diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
index 33410718089e..c8210247cf24 100644
--- a/drivers/gpu/drm/vc4/vc4_regs.h
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
@@ -774,11 +774,27 @@ enum {
 # define VC4_HD_CSC_CTL_RGB2YCC			BIT(1)
 # define VC4_HD_CSC_CTL_ENABLE			BIT(0)
 
+# define VC5_MT_CP_CSC_CTL_USE_444_TO_422	BIT(6)
+# define VC5_MT_CP_CSC_CTL_FILTER_MODE_444_TO_422_MASK \
+						VC4_MASK(5, 4)
+# define VC5_MT_CP_CSC_CTL_FILTER_MODE_444_TO_422_STANDARD \
+						3
+# define VC5_MT_CP_CSC_CTL_USE_RNG_SUPPRESSION	BIT(3)
 # define VC5_MT_CP_CSC_CTL_ENABLE		BIT(2)
 # define VC5_MT_CP_CSC_CTL_MODE_MASK		VC4_MASK(1, 0)
 
+# define VC5_MT_CP_CHANNEL_CTL_OUTPUT_REMAP_MASK \
+						VC4_MASK(7, 6)
+# define VC5_MT_CP_CHANNEL_CTL_OUTPUT_REMAP_LEGACY_STYLE \
+						2
+
 # define VC4_DVP_HT_CLOCK_STOP_PIXEL		BIT(1)
 
+# define VC5_DVP_HT_VEC_INTERFACE_CFG_SEL_422_MASK \
+						VC4_MASK(3, 2)
+# define VC5_DVP_HT_VEC_INTERFACE_CFG_SEL_422_FORMAT_422_LEGACY \
+						2
+
 /* HVS display list information. */
 #define HVS_BOOTLOADER_DLIST_END                32
 
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* Re: [PATCH v3 04/16] drm/connector: Fix typo in output format
  2022-01-13 14:07 ` [PATCH v3 04/16] drm/connector: Fix typo in output format Maxime Ripard
@ 2022-01-13 20:16     ` kernel test robot
  0 siblings, 0 replies; 19+ messages in thread
From: kernel test robot @ 2022-01-13 20:16 UTC (permalink / raw)
  To: Maxime Ripard, Daniel Vetter, David Airlie, Maarten Lankhorst,
	Thomas Zimmermann
  Cc: kbuild-all, Dom Cobley, Tim Gover, Dave Stevenson, dri-devel,
	Werner Sembach

Hi Maxime,

I love your patch! Yet something to improve:

[auto build test ERROR on drm/drm-next]
[also build test ERROR on drm-intel/for-linux-next v5.16 next-20220113]
[cannot apply to anholt/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Maxime-Ripard/drm-vc4-hdmi-Yet-Another-Approach-to-HDMI-YUV-output/20220113-221035
base:   git://anongit.freedesktop.org/drm/drm drm-next
config: csky-allmodconfig (https://download.01.org/0day-ci/archive/20220114/202201140436.WlQxR5wG-lkp@intel.com/config)
compiler: csky-linux-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/0day-ci/linux/commit/52bba93426db6667839f3b01a759ad9084127008
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Maxime-Ripard/drm-vc4-hdmi-Yet-Another-Approach-to-HDMI-YUV-output/20220113-221035
        git checkout 52bba93426db6667839f3b01a759ad9084127008
        # save the config file to linux build tree
        mkdir build_dir
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=csky SHELL=/bin/bash drivers/gpu/drm/rockchip/

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   drivers/gpu/drm/rockchip/analogix_dp-rockchip.c: In function 'rockchip_dp_get_modes':
>> drivers/gpu/drm/rockchip/analogix_dp-rockchip.c:120:48: error: 'DRM_COLOR_FORMAT_YCRCB422' undeclared (first use in this function); did you mean 'DRM_COLOR_FORMAT_YCBCR422'?
     120 |         u32 mask = DRM_COLOR_FORMAT_YCBCR444 | DRM_COLOR_FORMAT_YCRCB422;
         |                                                ^~~~~~~~~~~~~~~~~~~~~~~~~
         |                                                DRM_COLOR_FORMAT_YCBCR422
   drivers/gpu/drm/rockchip/analogix_dp-rockchip.c:120:48: note: each undeclared identifier is reported only once for each function it appears in


vim +120 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c

   114	
   115	static int rockchip_dp_get_modes(struct analogix_dp_plat_data *plat_data,
   116					 struct drm_connector *connector)
   117	{
   118		struct drm_display_info *di = &connector->display_info;
   119		/* VOP couldn't output YUV video format for eDP rightly */
 > 120		u32 mask = DRM_COLOR_FORMAT_YCBCR444 | DRM_COLOR_FORMAT_YCRCB422;
   121	
   122		if ((di->color_formats & mask)) {
   123			DRM_DEBUG_KMS("Swapping display color format from YUV to RGB\n");
   124			di->color_formats &= ~mask;
   125			di->color_formats |= DRM_COLOR_FORMAT_RGB444;
   126			di->bpc = 8;
   127		}
   128	
   129		return 0;
   130	}
   131	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [PATCH v3 04/16] drm/connector: Fix typo in output format
@ 2022-01-13 20:16     ` kernel test robot
  0 siblings, 0 replies; 19+ messages in thread
From: kernel test robot @ 2022-01-13 20:16 UTC (permalink / raw)
  To: kbuild-all

[-- Attachment #1: Type: text/plain, Size: 3160 bytes --]

Hi Maxime,

I love your patch! Yet something to improve:

[auto build test ERROR on drm/drm-next]
[also build test ERROR on drm-intel/for-linux-next v5.16 next-20220113]
[cannot apply to anholt/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Maxime-Ripard/drm-vc4-hdmi-Yet-Another-Approach-to-HDMI-YUV-output/20220113-221035
base:   git://anongit.freedesktop.org/drm/drm drm-next
config: csky-allmodconfig (https://download.01.org/0day-ci/archive/20220114/202201140436.WlQxR5wG-lkp(a)intel.com/config)
compiler: csky-linux-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/0day-ci/linux/commit/52bba93426db6667839f3b01a759ad9084127008
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Maxime-Ripard/drm-vc4-hdmi-Yet-Another-Approach-to-HDMI-YUV-output/20220113-221035
        git checkout 52bba93426db6667839f3b01a759ad9084127008
        # save the config file to linux build tree
        mkdir build_dir
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=csky SHELL=/bin/bash drivers/gpu/drm/rockchip/

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   drivers/gpu/drm/rockchip/analogix_dp-rockchip.c: In function 'rockchip_dp_get_modes':
>> drivers/gpu/drm/rockchip/analogix_dp-rockchip.c:120:48: error: 'DRM_COLOR_FORMAT_YCRCB422' undeclared (first use in this function); did you mean 'DRM_COLOR_FORMAT_YCBCR422'?
     120 |         u32 mask = DRM_COLOR_FORMAT_YCBCR444 | DRM_COLOR_FORMAT_YCRCB422;
         |                                                ^~~~~~~~~~~~~~~~~~~~~~~~~
         |                                                DRM_COLOR_FORMAT_YCBCR422
   drivers/gpu/drm/rockchip/analogix_dp-rockchip.c:120:48: note: each undeclared identifier is reported only once for each function it appears in


vim +120 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c

   114	
   115	static int rockchip_dp_get_modes(struct analogix_dp_plat_data *plat_data,
   116					 struct drm_connector *connector)
   117	{
   118		struct drm_display_info *di = &connector->display_info;
   119		/* VOP couldn't output YUV video format for eDP rightly */
 > 120		u32 mask = DRM_COLOR_FORMAT_YCBCR444 | DRM_COLOR_FORMAT_YCRCB422;
   121	
   122		if ((di->color_formats & mask)) {
   123			DRM_DEBUG_KMS("Swapping display color format from YUV to RGB\n");
   124			di->color_formats &= ~mask;
   125			di->color_formats |= DRM_COLOR_FORMAT_RGB444;
   126			di->bpc = 8;
   127		}
   128	
   129		return 0;
   130	}
   131	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org

^ permalink raw reply	[flat|nested] 19+ messages in thread

end of thread, other threads:[~2022-01-13 20:17 UTC | newest]

Thread overview: 19+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-01-13 14:07 [PATCH v3 00/16] drm/vc4: hdmi: Yet Another Approach to HDMI YUV output Maxime Ripard
2022-01-13 14:07 ` [PATCH v3 01/16] drm/edid: Rename drm_hdmi_avi_infoframe_colorspace to _colorimetry Maxime Ripard
2022-01-13 14:07 ` [PATCH v3 02/16] drm/edid: Don't clear formats if using deep color Maxime Ripard
2022-01-13 14:07 ` [PATCH v3 03/16] drm/edid: Split deep color modes between RGB and YUV444 Maxime Ripard
2022-01-13 14:07 ` [PATCH v3 04/16] drm/connector: Fix typo in output format Maxime Ripard
2022-01-13 20:16   ` kernel test robot
2022-01-13 20:16     ` kernel test robot
2022-01-13 14:07 ` [PATCH v3 05/16] drm/vc4: hdmi: Add full range RGB helper Maxime Ripard
2022-01-13 14:07 ` [PATCH v3 06/16] drm/vc4: hdmi: Use full range helper in csc functions Maxime Ripard
2022-01-13 14:07 ` [PATCH v3 07/16] drm/vc4: hdmi: Move XBAR setup to csc_setup Maxime Ripard
2022-01-13 14:07 ` [PATCH v3 08/16] drm/vc4: hdmi: Replace CSC_CTL hardcoded value by defines Maxime Ripard
2022-01-13 14:07 ` [PATCH v3 09/16] drm/vc4: hdmi: Define colorspace matrices Maxime Ripard
2022-01-13 14:07 ` [PATCH v3 10/16] drm/vc4: hdmi: Change CSC callback prototype Maxime Ripard
2022-01-13 14:07 ` [PATCH v3 11/16] drm/vc4: hdmi: Move clock validation to its own function Maxime Ripard
2022-01-13 14:07 ` [PATCH v3 12/16] drm/vc4: hdmi: Move clock calculation into " Maxime Ripard
2022-01-13 14:07 ` [PATCH v3 13/16] drm/vc4: hdmi: Take the sink maximum TMDS clock into account Maxime Ripard
2022-01-13 14:07 ` [PATCH v3 14/16] drm/vc4: hdmi: Take bpp into account for the scrambler Maxime Ripard
2022-01-13 14:07 ` [PATCH v3 15/16] drm/vc4: hdmi: Always try to have the highest bpc Maxime Ripard
2022-01-13 14:07 ` [PATCH v3 16/16] drm/vc4: hdmi: Support HDMI YUV output Maxime Ripard

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.