All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stefan Roese <sr@denx.de>
To: linux-pci@vger.kernel.org
Cc: "Bharat Kumar Gogada" <bharat.kumar.gogada@xilinx.com>,
	"Bjorn Helgaas" <helgaas@kernel.org>,
	"Pali Rohár" <pali@kernel.org>,
	"Michal Simek" <michal.simek@xilinx.com>
Subject: [PATCH v4 2/2] PCI: xilinx-nwl: Add method to init_platform_service_irqs hook
Date: Fri, 14 Jan 2022 08:58:34 +0100	[thread overview]
Message-ID: <20220114075834.1938409-3-sr@denx.de> (raw)
In-Reply-To: <20220114075834.1938409-1-sr@denx.de>

From: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>

Add nwl_init_platform_service_irqs() hook to init_platform_service_irqs
to register the platform-specific Service Errors IRQs for this PCIe
controller to fully support e.g. AER on this platform.

Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Pali Rohár <pali@kernel.org>
Cc: Michal Simek <michal.simek@xilinx.com>
---
 drivers/pci/controller/pcie-xilinx-nwl.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/pci/controller/pcie-xilinx-nwl.c b/drivers/pci/controller/pcie-xilinx-nwl.c
index 414b679175b3..540536bbe3f8 100644
--- a/drivers/pci/controller/pcie-xilinx-nwl.c
+++ b/drivers/pci/controller/pcie-xilinx-nwl.c
@@ -24,6 +24,7 @@
 #include <linux/irqchip/chained_irq.h>
 
 #include "../pci.h"
+#include "../pcie/portdrv.h"
 
 /* Bridge core config registers */
 #define BRCFG_PCIE_RX0			0x00000000
@@ -806,6 +807,22 @@ static int nwl_pcie_parse_dt(struct nwl_pcie *pcie,
 	return 0;
 }
 
+static int nwl_init_platform_service_irqs(struct pci_dev *dev, int *irqs,
+					  int plat_mask)
+{
+	struct pci_host_bridge *bridge;
+	struct nwl_pcie *pcie;
+
+	bridge = pci_find_host_bridge(dev->bus);
+	pcie = pci_host_bridge_priv(bridge);
+	if (plat_mask & PCIE_PORT_SERVICE_AER) {
+		irqs[PCIE_PORT_SERVICE_AER_SHIFT] = pcie->irq_misc;
+		return 0; /* platform-specific service IRQ installed */
+	}
+
+	return -ENODEV; /* platform-specific service IRQ not installed */
+}
+
 static const struct of_device_id nwl_pcie_of_match[] = {
 	{ .compatible = "xlnx,nwl-pcie-2.11", },
 	{}
@@ -857,6 +874,7 @@ static int nwl_pcie_probe(struct platform_device *pdev)
 
 	bridge->sysdata = pcie;
 	bridge->ops = &nwl_pcie_ops;
+	bridge->init_platform_service_irqs = nwl_init_platform_service_irqs;
 
 	if (IS_ENABLED(CONFIG_PCI_MSI)) {
 		err = nwl_pcie_enable_msi(pcie);
-- 
2.34.1


  parent reply	other threads:[~2022-01-14  7:58 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-14  7:58 [PATCH v4 0/2] Add support to register platform service IRQ Stefan Roese
2022-01-14  7:58 ` [PATCH v4 1/2] PCI/portdrv: Add option to setup IRQs for platform-specific Service Errors Stefan Roese
2022-01-14 11:46   ` Pali Rohár
2022-05-28  0:09   ` Bjorn Helgaas
2022-05-30  8:18     ` Stefan Roese
2022-05-30  8:32       ` Pali Rohár
2022-05-31 21:31         ` Bjorn Helgaas
2022-05-31 22:57           ` Pali Rohár
2022-06-01 11:47           ` Stefan Roese
2022-06-01 11:53             ` Pali Rohár
2022-06-08 18:39             ` Bjorn Helgaas
2022-01-14  7:58 ` Stefan Roese [this message]
2022-01-14 11:48   ` [PATCH v4 2/2] PCI: xilinx-nwl: Add method to init_platform_service_irqs hook Pali Rohár
2022-01-14 12:13     ` Stefan Roese
2022-01-14 12:34       ` Pali Rohár
2022-01-14 17:03         ` Stefan Roese
2022-03-24 16:52 ` [PATCH v4 0/2] Add support to register platform service IRQ Stefan Roese
2022-03-31 15:30   ` Bjorn Helgaas
2022-04-01  6:28     ` Stefan Roese
2022-04-01 12:35       ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220114075834.1938409-3-sr@denx.de \
    --to=sr@denx.de \
    --cc=bharat.kumar.gogada@xilinx.com \
    --cc=helgaas@kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=michal.simek@xilinx.com \
    --cc=pali@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.