All of lore.kernel.org
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org, Larry Finger <Larry.Finger@lwfinger.net>,
	Marcel Holtmann <marcel@holtmann.org>
Subject: [PATCH 5.15 08/41] Bbluetooth: btusb: Add another Bluetooth part for Realtek 8852AE
Date: Fri, 14 Jan 2022 09:16:08 +0100	[thread overview]
Message-ID: <20220114081545.447849780@linuxfoundation.org> (raw)
In-Reply-To: <20220114081545.158363487@linuxfoundation.org>

From: Larry Finger <Larry.Finger@lwfinger.net>

commit d1dcbf615af6c3d743fed00833b409259feb540a upstream.

This Realtek device has both wifi and BT components. The latter reports
a USB ID of 0bda:4852, which is not in the table.

When adding the new device, I noticed that the RTL8852AE was mentioned in
two places. These are now combined.

The portion of /sys/kernel/debug/usb/devices pertaining to this device is

T:  Bus=06 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#=  3 Spd=12   MxCh= 0
D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0bda ProdID=4852 Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/bluetooth/btusb.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -384,8 +384,12 @@ static const struct usb_device_id blackl
 	/* Realtek 8852AE Bluetooth devices */
 	{ USB_DEVICE(0x0bda, 0xc852), .driver_info = BTUSB_REALTEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0bda, 0x4852), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x04c5, 0x165c), .driver_info = BTUSB_REALTEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x04ca, 0x4006), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
 
 	/* Realtek Bluetooth devices */
 	{ USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
@@ -460,10 +464,6 @@ static const struct usb_device_id blackl
 	/* Additional Realtek 8822CE Bluetooth devices */
 	{ USB_DEVICE(0x04ca, 0x4005), .driver_info = BTUSB_REALTEK |
 						     BTUSB_WIDEBAND_SPEECH },
-	/* Bluetooth component of Realtek 8852AE device */
-	{ USB_DEVICE(0x04ca, 0x4006), .driver_info = BTUSB_REALTEK |
-						     BTUSB_WIDEBAND_SPEECH },
-
 	{ USB_DEVICE(0x04c5, 0x161f), .driver_info = BTUSB_REALTEK |
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0b05, 0x18ef), .driver_info = BTUSB_REALTEK |



  parent reply	other threads:[~2022-01-14  8:21 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-14  8:16 [PATCH 5.15 00/41] 5.15.15-rc1 review Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 01/41] s390/kexec: handle R_390_PLT32DBL rela in arch_kexec_apply_relocations_add() Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 02/41] workqueue: Fix unbind_workers() VS wq_worker_running() race Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 03/41] staging: r8188eu: switch the led off during deinit Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 04/41] bpf: Fix out of bounds access from invalid *_or_null type verification Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 05/41] Bluetooth: btusb: Add protocol for MediaTek bluetooth devices(MT7922) Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 06/41] Bluetooth: btusb: Add the new support ID for Realtek RTL8852A Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 07/41] Bluetooth: btusb: Add support for IMC Networks Mediatek Chip(MT7921) Greg Kroah-Hartman
2022-01-14  8:16 ` Greg Kroah-Hartman [this message]
2022-01-14  8:16 ` [PATCH 5.15 09/41] Bluetooth: btusb: fix memory leak in btusb_mtk_submit_wmt_recv_urb() Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 10/41] Bluetooth: btusb: enable Mediatek to support AOSP extension Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 11/41] Bluetooth: btusb: Add one more Bluetooth part for the Realtek RTL8852AE Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 12/41] Bluetooth: btusb: Add the new support IDs for WCN6855 Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 13/41] fget: clarify and improve __fget_files() implementation Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 14/41] Bluetooth: btusb: Add one more Bluetooth part for WCN6855 Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 15/41] Bluetooth: btusb: Add two more Bluetooth parts " Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 16/41] Bluetooth: btusb: Add support for Foxconn MT7922A Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 17/41] Bluetooth: btintel: Fix broken LED quirk for legacy ROM devices Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 18/41] Bluetooth: btusb: Add support for Foxconn QCA 0xe0d0 Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 19/41] Bluetooth: bfusb: fix division by zero in send path Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 20/41] ARM: dts: exynos: Fix BCM4330 Bluetooth reset polarity in I9100 Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 21/41] USB: core: Fix bug in resuming hubs handling of wakeup requests Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 22/41] USB: Fix "slab-out-of-bounds Write" bug in usb_hcd_poll_rh_status Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 23/41] ath11k: Fix buffer overflow when scanning with extraie Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 24/41] mmc: sdhci-pci: Add PCI ID for Intel ADL Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 25/41] Bluetooth: add quirk disabling LE Read Transmit Power Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 26/41] Bluetooth: btbcm: disable read tx power for some Macs with the T2 Security chip Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 27/41] Bluetooth: btbcm: disable read tx power for MacBook Air 8,1 and 8,2 Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 28/41] veth: Do not record rx queue hint in veth_xmit Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 29/41] mfd: intel-lpss: Fix too early PM enablement in the ACPI ->probe() Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 30/41] x86/mce: Remove noinstr annotation from mce_setup() Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 31/41] can: gs_usb: fix use of uninitialized variable, detach device on reception of invalid USB data Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 32/41] can: isotp: convert struct tpcon::{idx,len} to unsigned int Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 33/41] can: gs_usb: gs_can_start_xmit(): zero-initialize hf->{flags,reserved} Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 34/41] random: fix data race on crng_node_pool Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 35/41] random: fix data race on crng init time Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 36/41] random: fix crash on multiple early calls to add_bootloader_randomness() Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 37/41] platform/x86/intel: hid: add quirk to support Surface Go 3 Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 38/41] media: Revert "media: uvcvideo: Set unique vdev name based in type" Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 39/41] staging: wlan-ng: Avoid bitwise vs logical OR warning in hfa384x_usb_throttlefn() Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 40/41] drm/i915: Avoid bitwise vs logical OR warning in snb_wm_latency_quirk() Greg Kroah-Hartman
2022-01-14  8:16 ` [PATCH 5.15 41/41] staging: greybus: fix stack size warning with UBSAN Greg Kroah-Hartman
2022-01-14 17:43 ` [PATCH 5.15 00/41] 5.15.15-rc1 review Naresh Kamboju
2022-01-14 18:09 ` Jon Hunter
2022-01-14 19:59 ` Ron Economos
2022-01-15  8:14   ` Greg Kroah-Hartman
2022-01-15 11:52     ` Ron Economos
2022-01-15 12:15       ` Greg Kroah-Hartman
2022-01-15 12:31         ` Ron Economos
2022-01-14 22:29 ` Florian Fainelli
2022-01-14 23:32 ` Fox Chen
2022-01-15  0:24 ` Shuah Khan
2022-01-15 11:03 ` Sudip Mukherjee
2022-01-15 14:47 ` Andrei Rabusov
2022-01-15 16:39 ` Guenter Roeck
2022-01-15 16:48 ` Jeffrin Jose T

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220114081545.447849780@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=Larry.Finger@lwfinger.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcel@holtmann.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.