All of lore.kernel.org
 help / color / mirror / Atom feed
From: Michael Riesch <michael.riesch@wolfvision.net>
To: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: "Mauro Carvalho Chehab" <mchehab@kernel.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Sakari Ailus" <sakari.ailus@linux.intel.com>,
	"Ezequiel Garcia" <ezequiel@vanguardiasur.com.ar>,
	"Jacopo Mondi" <jacopo@jmondi.org>,
	"Laurent Pinchart" <laurent.pinchart+renesas@ideasonboard.com>,
	"Daniel Scally" <djrscally@gmail.com>,
	"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>,
	"Michael Riesch" <michael.riesch@wolfvision.net>
Subject: [PATCH 2/2] media: v4l2-mediabus: add support for dual edge sampling
Date: Fri, 14 Jan 2022 11:57:55 +0100	[thread overview]
Message-ID: <20220114105755.730200-3-michael.riesch@wolfvision.net> (raw)
In-Reply-To: <20220114105755.730200-1-michael.riesch@wolfvision.net>

Some devices support sampling of the parallel data at both edges of the
interface pixel clock in order to reduce the pixel clock by two.
Add a mediabus flag that represents this feature.

Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
---
 drivers/media/v4l2-core/v4l2-fwnode.c | 23 +++++++++++++++++++----
 include/media/v4l2-mediabus.h         | 17 +++++++++--------
 2 files changed, 28 insertions(+), 12 deletions(-)

diff --git a/drivers/media/v4l2-core/v4l2-fwnode.c b/drivers/media/v4l2-core/v4l2-fwnode.c
index 00457e1e93f6..70adf6549f5b 100644
--- a/drivers/media/v4l2-core/v4l2-fwnode.c
+++ b/drivers/media/v4l2-core/v4l2-fwnode.c
@@ -296,10 +296,25 @@ v4l2_fwnode_endpoint_parse_parallel_bus(struct fwnode_handle *fwnode,
 
 	if (!fwnode_property_read_u32(fwnode, "pclk-sample", &v)) {
 		flags &= ~(V4L2_MBUS_PCLK_SAMPLE_RISING |
-			   V4L2_MBUS_PCLK_SAMPLE_FALLING);
-		flags |= v ? V4L2_MBUS_PCLK_SAMPLE_RISING :
-			V4L2_MBUS_PCLK_SAMPLE_FALLING;
-		pr_debug("pclk-sample %s\n", v ? "high" : "low");
+			   V4L2_MBUS_PCLK_SAMPLE_FALLING |
+			   V4L2_MBUS_PCLK_SAMPLE_DUALEDGE);
+		switch (v) {
+		case 0:
+			flags |= V4L2_MBUS_PCLK_SAMPLE_FALLING;
+			pr_debug("pclk-sample low\n");
+			break;
+		case 1:
+			flags |= V4L2_MBUS_PCLK_SAMPLE_RISING;
+			pr_debug("pclk-sample high\n");
+			break;
+		case 2:
+			flags |= V4L2_MBUS_PCLK_SAMPLE_DUALEDGE;
+			pr_debug("pclk-sample dual edge\n");
+			break;
+		default:
+			pr_warn("invalid argument for pclk-sample");
+			break;
+		}
 	}
 
 	if (!fwnode_property_read_u32(fwnode, "data-active", &v)) {
diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h
index 841e190aedd9..c98f956ef586 100644
--- a/include/media/v4l2-mediabus.h
+++ b/include/media/v4l2-mediabus.h
@@ -57,17 +57,18 @@
 #define V4L2_MBUS_VSYNC_ACTIVE_LOW		BIT(5)
 #define V4L2_MBUS_PCLK_SAMPLE_RISING		BIT(6)
 #define V4L2_MBUS_PCLK_SAMPLE_FALLING		BIT(7)
-#define V4L2_MBUS_DATA_ACTIVE_HIGH		BIT(8)
-#define V4L2_MBUS_DATA_ACTIVE_LOW		BIT(9)
+#define V4L2_MBUS_PCLK_SAMPLE_DUALEDGE		BIT(8)
+#define V4L2_MBUS_DATA_ACTIVE_HIGH		BIT(9)
+#define V4L2_MBUS_DATA_ACTIVE_LOW		BIT(10)
 /* FIELD = 0/1 - Field1 (odd)/Field2 (even) */
-#define V4L2_MBUS_FIELD_EVEN_HIGH		BIT(10)
+#define V4L2_MBUS_FIELD_EVEN_HIGH		BIT(11)
 /* FIELD = 1/0 - Field1 (odd)/Field2 (even) */
-#define V4L2_MBUS_FIELD_EVEN_LOW		BIT(11)
+#define V4L2_MBUS_FIELD_EVEN_LOW		BIT(12)
 /* Active state of Sync-on-green (SoG) signal, 0/1 for LOW/HIGH respectively. */
-#define V4L2_MBUS_VIDEO_SOG_ACTIVE_HIGH		BIT(12)
-#define V4L2_MBUS_VIDEO_SOG_ACTIVE_LOW		BIT(13)
-#define V4L2_MBUS_DATA_ENABLE_HIGH		BIT(14)
-#define V4L2_MBUS_DATA_ENABLE_LOW		BIT(15)
+#define V4L2_MBUS_VIDEO_SOG_ACTIVE_HIGH		BIT(13)
+#define V4L2_MBUS_VIDEO_SOG_ACTIVE_LOW		BIT(14)
+#define V4L2_MBUS_DATA_ENABLE_HIGH		BIT(15)
+#define V4L2_MBUS_DATA_ENABLE_LOW		BIT(16)
 
 /* Serial flags */
 /* CSI-2 D-PHY number of data lanes. */
-- 
2.30.2


  parent reply	other threads:[~2022-01-14 10:58 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-14 10:57 [PATCH 0/2] media: v4l2-mediabus: add support for dual edge sampling Michael Riesch
2022-01-14 10:57 ` [PATCH 1/2] dt-bindings: media: video-interfaces: " Michael Riesch
2022-01-17  8:29   ` Jacopo Mondi
2022-02-09  2:32   ` Rob Herring
2022-01-14 10:57 ` Michael Riesch [this message]
2022-01-17  8:30   ` [PATCH 2/2] media: v4l2-mediabus: " Jacopo Mondi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220114105755.730200-3-michael.riesch@wolfvision.net \
    --to=michael.riesch@wolfvision.net \
    --cc=devicetree@vger.kernel.org \
    --cc=djrscally@gmail.com \
    --cc=ezequiel@vanguardiasur.com.ar \
    --cc=jacopo@jmondi.org \
    --cc=laurent.pinchart+renesas@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=niklas.soderlund+renesas@ragnatech.se \
    --cc=robh+dt@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.