[PATCH 0/4] usb: phy: generic: Support enabling/disabling VBUS

[PATCH 0/4] usb: phy: generic: Support enabling/disabling VBUS

[Sean Anderson]

The generic USB phy has had VBUS-related code for a long time, but it
has always been broken, since the regulator was never gotten from the
device tree. However, the support itself seems not very useful, since
e.g.  usb_phy_vbus_on/off has no users and usb_phy_set_power is only
used by gadgets to make sure they don't draw too much current. Instead,
use the VBUS regulator to implement otg_set_vbus, which is called from
several drivers. This results in a change in semantics of VBUS, but
since support was always broken I don't think this will have any affect.


Sean Anderson (4):
  dt-bindings: usb: usb-nop-xceiv: Repurpose vbus-regulator
  usb: phy: generic: Get the vbus supply
  usb: phy: generic: Implement otg->set_vbus
  usb: phy: generic: Disable vbus on removal

 .../bindings/usb/usb-nop-xceiv.yaml           |  8 +--
 drivers/usb/phy/phy-generic.c                 | 55 +++++++++----------
 2 files changed, 31 insertions(+), 32 deletions(-)

-- 
2.25.1

[PATCH 1/4] dt-bindings: usb: usb-nop-xceiv: Repurpose vbus-regulator

[Sean Anderson]

The vbus-regulator property was never actually read from the device tree.
Introduce a new property vbus-supply to represent the regulator powering
the VBUS when acting as an A-Device. This supply will be enabled and
disabled as necessary. Note that this is different from vbus-regulator,
which represented the available current available to draw from VBUS in
B-Device mode. Because no one was using vbus-regulator, remove it.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
---

 Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml
index 2824c17285ee..a79459bb5a4c 100644
--- a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml
+++ b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml
@@ -34,9 +34,9 @@ properties:
     description: Should specify the GPIO detecting a VBus insertion
     maxItems: 1
 
-  vbus-regulator:
-    description: Should specifiy the regulator supplying current drawn from
-      the VBus line.
+  vbus-supply:
+  description: regulator supplying VBUS. It will be enabled and disabled
+               dynamically in OTG mode.
     $ref: /schemas/types.yaml#/definitions/phandle
 
 required:
@@ -57,7 +57,7 @@ examples:
         vcc-supply = <&hsusb1_vcc_regulator>;
         reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
         vbus-detect-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
-        vbus-regulator = <&vbus_regulator>;
+        vbus-supply = <&vbus_regulator>;
         #phy-cells = <0>;
     };
 
-- 
2.25.1

[PATCH 2/4] usb: phy: generic: Get the vbus supply

[Sean Anderson]

While support for working with a vbus was added, the regulator was never
actually gotten (despite what was documented). Fix this by actually
getting the supply from the device tree.

Fixes: 7acc9973e3c4 ("usb: phy: generic: add vbus support")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
---

 drivers/usb/phy/phy-generic.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index 661a229c105d..34b9f8140187 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -268,6 +268,13 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop)
 			return -EPROBE_DEFER;
 	}
 
+	nop->vbus_draw = devm_regulator_get_exclusive(dev, "vbus");
+	if (PTR_ERR(nop->vbus_draw) == -ENODEV)
+		nop->vbus_draw = NULL;
+	if (IS_ERR(nop->vbus_draw))
+		return dev_err_probe(dev, PTR_ERR(nop->vbus_draw),
+				     "could not get vbus regulator\n");
+
 	nop->dev		= dev;
 	nop->phy.dev		= nop->dev;
 	nop->phy.label		= "nop-xceiv";
-- 
2.25.1

[PATCH 3/4] usb: phy: generic: Implement otg->set_vbus

[Sean Anderson]

Some USB controller drivers call otg_set_vbus when entering host or
device mode. Implement this callback so that VBUS can be turned on and
off automatically. This is especially useful when there is no property
for a VBUS supply in the controller's binding.

This results in a change in semantics of the vbus_draw regulator.
Whereas before it represented the VBUS supplied by an A-Device when we
acted as a B-Device, now it represents an internal VBUS source.
Accordingly, we no longer set the current limit or enable/disable the
bus from nop_gpio_vbus_thread. Because this supply was never initialized
before the previous commit, there should be no change in behavior.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
---

 drivers/usb/phy/phy-generic.c | 45 +++++++++++++----------------------
 1 file changed, 17 insertions(+), 28 deletions(-)

diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index 34b9f8140187..2c2553bc9b54 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -68,33 +68,26 @@ static void nop_reset(struct usb_phy_generic *nop)
 }
 
 /* interface to regulator framework */
-static void nop_set_vbus_draw(struct usb_phy_generic *nop, unsigned mA)
+static int nop_set_vbus(struct usb_otg *otg, bool enable)
 {
-	struct regulator *vbus_draw = nop->vbus_draw;
-	int enabled;
-	int ret;
+	int ret = 0;
+	struct usb_phy_generic *nop = dev_get_drvdata(otg->usb_phy->dev);
 
-	if (!vbus_draw)
-		return;
+	if (!nop->vbus_draw)
+		return 0;
 
-	enabled = nop->vbus_draw_enabled;
-	if (mA) {
-		regulator_set_current_limit(vbus_draw, 0, 1000 * mA);
-		if (!enabled) {
-			ret = regulator_enable(vbus_draw);
-			if (ret < 0)
-				return;
-			nop->vbus_draw_enabled = 1;
-		}
-	} else {
-		if (enabled) {
-			ret = regulator_disable(vbus_draw);
-			if (ret < 0)
-				return;
-			nop->vbus_draw_enabled = 0;
-		}
+	if (enable && !nop->vbus_draw_enabled) {
+		ret = regulator_enable(nop->vbus_draw);
+		if (ret)
+			nop->vbus_draw_enabled = false;
+		else
+			nop->vbus_draw_enabled = true;
+
+	} else if (!enable && nop->vbus_draw_enabled) {
+		ret = regulator_disable(nop->vbus_draw);
+		nop->vbus_draw_enabled = false;
 	}
-	nop->mA = mA;
+	return ret;
 }
 
 
@@ -114,14 +107,9 @@ static irqreturn_t nop_gpio_vbus_thread(int irq, void *data)
 		otg->state = OTG_STATE_B_PERIPHERAL;
 		nop->phy.last_event = status;
 
-		/* drawing a "unit load" is *always* OK, except for OTG */
-		nop_set_vbus_draw(nop, 100);
-
 		atomic_notifier_call_chain(&nop->phy.notifier, status,
 					   otg->gadget);
 	} else {
-		nop_set_vbus_draw(nop, 0);
-
 		status = USB_EVENT_NONE;
 		otg->state = OTG_STATE_B_IDLE;
 		nop->phy.last_event = status;
@@ -285,6 +273,7 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop)
 	nop->phy.otg->usb_phy		= &nop->phy;
 	nop->phy.otg->set_host		= nop_set_host;
 	nop->phy.otg->set_peripheral	= nop_set_peripheral;
+	nop->phy.otg->set_vbus          = nop_set_vbus;
 
 	return 0;
 }
-- 
2.25.1

[PATCH 4/4] usb: phy: generic: Disable vbus on removal

[Sean Anderson]

If we enabled vbus, we need to balance that with a disable.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
---

 drivers/usb/phy/phy-generic.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index 2c2553bc9b54..9fc3312d614a 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -328,6 +328,9 @@ static int usb_phy_generic_remove(struct platform_device *pdev)
 
 	usb_remove_phy(&nop->phy);
 
+	if (nop->vbus_draw && nop->vbus_draw_enabled)
+		regulator_disable(nop->vbus_draw);
+
 	return 0;
 }
 
-- 
2.25.1

Re: [PATCH 1/4] dt-bindings: usb: usb-nop-xceiv: Repurpose vbus-regulator

[Rob Herring]

On Fri, 14 Jan 2022 12:09:38 -0500, Sean Anderson wrote:
> The vbus-regulator property was never actually read from the device tree.
> Introduce a new property vbus-supply to represent the regulator powering
> the VBUS when acting as an A-Device. This supply will be enabled and
> disabled as necessary. Note that this is different from vbus-regulator,
> which represented the available current available to draw from VBUS in
> B-Device mode. Because no one was using vbus-regulator, remove it.
> 
> Signed-off-by: Sean Anderson <sean.anderson@seco.com>
> ---
> 
>  Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml:37:15: [error] empty value in block mapping (empty-values)
./Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml:40:9: [error] syntax error: mapping values are not allowed here (syntax)

dtschema/dtc warnings/errors:
make[1]: *** Deleting file 'Documentation/devicetree/bindings/usb/usb-nop-xceiv.example.dts'
Traceback (most recent call last):
  File "/usr/local/bin/dt-extract-example", line 46, in <module>
    binding = yaml.load(open(args.yamlfile, encoding='utf-8').read())
  File "/usr/local/lib/python3.8/dist-packages/ruamel/yaml/main.py", line 434, in load
    return constructor.get_single_data()
  File "/usr/local/lib/python3.8/dist-packages/ruamel/yaml/constructor.py", line 119, in get_single_data
    node = self.composer.get_single_node()
  File "_ruamel_yaml.pyx", line 706, in _ruamel_yaml.CParser.get_single_node
  File "_ruamel_yaml.pyx", line 724, in _ruamel_yaml.CParser._compose_document
  File "_ruamel_yaml.pyx", line 775, in _ruamel_yaml.CParser._compose_node
  File "_ruamel_yaml.pyx", line 889, in _ruamel_yaml.CParser._compose_mapping_node
  File "_ruamel_yaml.pyx", line 775, in _ruamel_yaml.CParser._compose_node
  File "_ruamel_yaml.pyx", line 891, in _ruamel_yaml.CParser._compose_mapping_node
  File "_ruamel_yaml.pyx", line 904, in _ruamel_yaml.CParser._parse_next_event
ruamel.yaml.scanner.ScannerError: mapping values are not allowed in this context
  in "<unicode string>", line 40, column 9
make[1]: *** [Documentation/devicetree/bindings/Makefile:25: Documentation/devicetree/bindings/usb/usb-nop-xceiv.example.dts] Error 1
make[1]: *** Waiting for unfinished jobs....
./Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml:  mapping values are not allowed in this context
  in "<unicode string>", line 40, column 9
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml: ignoring, error parsing file
make: *** [Makefile:1413: dt_binding_check] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1580217

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.

Re: [PATCH 0/4] usb: phy: generic: Support enabling/disabling VBUS

[Sean Anderson]

On 1/14/22 12:09 PM, Sean Anderson wrote:
> The generic USB phy has had VBUS-related code for a long time, but it
> has always been broken, since the regulator was never gotten from the
> device tree. However, the support itself seems not very useful, since
> e.g.  usb_phy_vbus_on/off has no users and usb_phy_set_power is only
> used by gadgets to make sure they don't draw too much current. Instead,
> use the VBUS regulator to implement otg_set_vbus, which is called from
> several drivers. This results in a change in semantics of VBUS, but
> since support was always broken I don't think this will have any affect.
> 
> 
> Sean Anderson (4):
>   dt-bindings: usb: usb-nop-xceiv: Repurpose vbus-regulator
>   usb: phy: generic: Get the vbus supply
>   usb: phy: generic: Implement otg->set_vbus
>   usb: phy: generic: Disable vbus on removal
> 
>  .../bindings/usb/usb-nop-xceiv.yaml           |  8 +--
>  drivers/usb/phy/phy-generic.c                 | 55 +++++++++----------
>  2 files changed, 31 insertions(+), 32 deletions(-)
> 

ping?

When this was submitted I got an email saying that the merge window was
closed... but I think it has opened and closed again during the
intervening time.

--Sean

Re: [PATCH 0/4] usb: phy: generic: Support enabling/disabling VBUS

[Greg Kroah-Hartman]

On Tue, Apr 05, 2022 at 10:51:34AM -0400, Sean Anderson wrote:
> 
> 
> On 1/14/22 12:09 PM, Sean Anderson wrote:
> > The generic USB phy has had VBUS-related code for a long time, but it
> > has always been broken, since the regulator was never gotten from the
> > device tree. However, the support itself seems not very useful, since
> > e.g.  usb_phy_vbus_on/off has no users and usb_phy_set_power is only
> > used by gadgets to make sure they don't draw too much current. Instead,
> > use the VBUS regulator to implement otg_set_vbus, which is called from
> > several drivers. This results in a change in semantics of VBUS, but
> > since support was always broken I don't think this will have any affect.
> > 
> > 
> > Sean Anderson (4):
> >   dt-bindings: usb: usb-nop-xceiv: Repurpose vbus-regulator
> >   usb: phy: generic: Get the vbus supply
> >   usb: phy: generic: Implement otg->set_vbus
> >   usb: phy: generic: Disable vbus on removal
> > 
> >  .../bindings/usb/usb-nop-xceiv.yaml           |  8 +--
> >  drivers/usb/phy/phy-generic.c                 | 55 +++++++++----------
> >  2 files changed, 31 insertions(+), 32 deletions(-)
> > 
> 
> ping?
> 
> When this was submitted I got an email saying that the merge window was
> closed... but I think it has opened and closed again during the
> intervening time.

It opened yesterday.  Please give us a chance to catch up.

While that happens, please take the time to review other changes on the
mailing lists, we can always use the help.

thanks,

greg k-h

Re: [PATCH 0/4] usb: phy: generic: Support enabling/disabling VBUS

[Sean Anderson]

On 4/5/22 11:02 AM, Greg Kroah-Hartman wrote:
> On Tue, Apr 05, 2022 at 10:51:34AM -0400, Sean Anderson wrote:
>> 
>> 
>> On 1/14/22 12:09 PM, Sean Anderson wrote:
>> > The generic USB phy has had VBUS-related code for a long time, but it
>> > has always been broken, since the regulator was never gotten from the
>> > device tree. However, the support itself seems not very useful, since
>> > e.g.  usb_phy_vbus_on/off has no users and usb_phy_set_power is only
>> > used by gadgets to make sure they don't draw too much current. Instead,
>> > use the VBUS regulator to implement otg_set_vbus, which is called from
>> > several drivers. This results in a change in semantics of VBUS, but
>> > since support was always broken I don't think this will have any affect.
>> > 
>> > 
>> > Sean Anderson (4):
>> >   dt-bindings: usb: usb-nop-xceiv: Repurpose vbus-regulator
>> >   usb: phy: generic: Get the vbus supply
>> >   usb: phy: generic: Implement otg->set_vbus
>> >   usb: phy: generic: Disable vbus on removal
>> > 
>> >  .../bindings/usb/usb-nop-xceiv.yaml           |  8 +--
>> >  drivers/usb/phy/phy-generic.c                 | 55 +++++++++----------
>> >  2 files changed, 31 insertions(+), 32 deletions(-)
>> > 
>> 
>> ping?
>> 
>> When this was submitted I got an email saying that the merge window was
>> closed... but I think it has opened and closed again during the
>> intervening time.
> 
> It opened yesterday.  Please give us a chance to catch up.

Ah, sorry. I thought this series had just gotten lost.

> While that happens, please take the time to review other changes on the
> mailing lists, we can always use the help.

Noted.

--Sean